Safety jobs in Pomona, California - Page 4Create job alerts

Job Description Job Title: Bore Operator Department: Construction Reports To:Greg Deiner,Sergio Lopez Employment Status: Hourly (Non-exempt) Primary Location: Ontario We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Operator will operate heavy machinery for construction or excavation projects in a safe manner, avoiding utilities and other obstacles. Job Responsibilities (Including, but not limited to): • Operate heavy equipment in compliance with the company's operating safety policies and procedures., • Load and unload equipment from vehicles and trailers., • Responsible for regular maintenance and care of the assigned heavy equipment, producing any documentation needed for each job, and daily communication with managers is a must., • Loads and hauls the machine., • Drives, sets up, and breaks down safely and efficiently., • Operates heavy equipment near active utilities., • Have knowledge of shoring systems and how to use them, • Rigging and setting of structures, • Along with operating, must be willing to assist in other activities, such as but not limited to, • Placement of conduit in open trenches, • Proofing conduits, • Potholing existing utilities, • Forming and pouring of concrete, • Placement of asphalt, • Avoids any marked utilities and implements all precautions to prevent utility strikes., • Communicates with supervisors for job details., • Before the equipment is utilized, walks path to ensure all utilities have been located and develops a plan for going above or below each utility or obstacle in the path., • Inspects and maintains job equipment., • Adheres to all company policies, procedures, standards, and safety rules., • May be required to work additional hours and/or weekends, as needed, to meet deadlines., • High school diploma or equivalent required., • Minimum 1-year prior experience using the locating equipment to find any underground utilities., • Must have experience operating heavy equipment near active utilities., • Must have CATV / Spectrum experience., • Preferred are Mini X / Excavator skills and training, • Concrete finishing and asphalt restoration experience is a plus., • Bucket truck training and certs are a plus., • Must be familiar with locate systems., • Ability to operate an asphalt roller, skid steer, backhoe, mini excavator, vacuum truck, bore machine, and other heavy equipment., • Must have a valid driver’s license., • Possession of a commercial driver's license (CDL) with tanker endorsement or a willingness to obtain the license., • DOT Medical Card., • Experience with Ditch Witch and Vermeer is preferred., • Must be able to operate the equipment safely., • Read and understand plans and specifications., • Must follow all OSHA, ANSI standards, as well as company rules & regulations., • Knowledge of basic computer skills., • Experience and knowledge of basic shoring methods. Physical Demands and Work Environment • Must be able and willing to work outdoors, subject to inclement weather conditions, • Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement, • Must be able to work around heavy equipment and machinery, • Must be able to stand or walk for long periods of time., • Must be able to bend and lift and carry up to 50 pounds, • Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting, • Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time., • DOT Medical Card, • Commercial Driver's License (CDL), • First Aid Certification, • Flagger Certification, • Competent Person Certification, • OSHA 10, • Silica Training, • Confined Space Training, • Trench Safety Training All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship. An Operator I, II, or III title differentiation lies in the experience and/or skill level of the individual. Operator I Level: T2 Pay Grade: Level 2 Operator II Level: T3 Pay Grade: Level 3 Operator III Level: T4 Pay Grade: Level 4 · Requires minimal supervision to operate heavy construction equipment. · Possesses and maintains all required Licenses, Certifications, and Registrations. · Possesses the necessary KSAs to perform all essential duties and responsibilities for Operators. · Requires no supervision to operate heavy construction equipment. · Possesses and maintains all required Licenses, Certifications, and Registrations. · Proven mastery of all Operator duties and responsibilities. · Possesses the ability to train Operator I and Laborer in essential duties and responsibilities. · Requires no supervision to operate heavy construction equipment. · Possesses and maintains all required Licenses, Certifications, and Registrations. · Proven mastery of all Operator duties and responsibilities. · Possesses the ability to train Operator I, II, and Laborer in essential duties and responsibilities. · Cross trained in at least one other field position (ex. Lineman or Splicer). · Possesses and maintains additional OSHA 30 certification. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Description Overview $23.50-$32.75/Hourly The primary role of the Dental Assistant is to support the success of the clinicians through effective delivery of the Perfect Patient Experience (PPE), thus creating a Patient for Life (PFL). Dental assistants perform a variety of patient care, office, and laboratory duties. Dental assistants prepare patients for oral examination and assist other dental professionals in providing treatment to the teeth, mouth, and gums. Dental assistants must work effectively with co-workers including Specialty dental assistants, patients, and the front office by sharing ideas in a constructive and positive manner. A successful dental assistant will execute active listening to objectively consider ideas and suggestions from others, keep commitments; keep others informed of work progress, and address problems constructively to identify practical business solutions. Specialty Dental Assistants If dental assistant is assigned within specialty areas including: Endodontics, Oral Surgery, Orthodontics, Periodontics or Pediatric, they will primarily be supporting clinicians within that specialty and may be required to have additional training. Responsibilities * Perform functions in accordance with the applicable state’s Dental Auxiliaries Table of Permitted Duties. * Actively participate in the PPE by striving to keep your patients focused on optimal treatment while attending to their individual needs and concerns. * Escort patients to/from the front desk and introduce them to other team members as appropriate. * Communicate with the front and back office teams to ensure the Orthodontists schedule runs smoothly and efficiently. * Maintain a clean, sterile, and cheerful environment. * Sterilize and disinfect instruments and equipment; clean each operatory in accordance with the state applicable infection control guidelines. * Prepare patients for treatment and assist the dentist- thereby enabling them to provide efficient, quality dental treatment. * At the direction of the clinician, complete radiographs and intra-oral pictures of patients in an efficient and timely manner. * Prepare tray setups for dental procedures and maintain adequate supply levels in each operatory, replenishing as needed to provide efficient patient care. * Keep the patients' mouths dry and clear by using suction or other devices. * Instruct patients on postoperative and general oral health care as directed by the clinician. * Record patient charting and all the clinician’s notes in the digital patient chart as directed by the clinician. * Support patient care by presenting treatment record, consents and health history to clinician prior to patient treatment. * Ensure equipment is maintained according to manufacturer’s guidelines. * Work closely with Lead Dental Assistant to ensure adequate clinical supplies are on hand. * Utilize technology by learning how to operate and give explanation/demonstration of how to operate to others. * Participate in daily morning huddles, monthly team meetings and any other meetings as required. * Models company culture, values, standards and best operational practices based on the “We Believes.” * Demonstrates stewardship of the PDS Brand making decisions consistent with the PDS Brand framework. * Implements the Perfect Patient Experience process in efforts to gain Patients for Life. * Maintains an appropriate professional appearance and demeanor in accordance with company policies; addresses others professionally and respectfully. * Ensures Compliance with Company policies, as well as State, Federal and other regulatory bodies. * Other duties and responsibilities as assigned. Qualifications * Equivalent to high school diploma or general education degree (GED), and specified training courses as mandated by state for certification, licensure, or registration. * Certificates/Licenses/Registrations: As mandated by applicable state. * Specialty Dental Assistants must possess and maintain a valid driver’s license and automobile insurance. Driver’s license must be verified by completing a background check and motor vehicle record check at the time of hire. * Specialty Dental Assistants are required to timely travel to multiple offices per day, in some cases several times per day, and must have reliable means of transportation to travel to assigned offices. * In lieu of a valid driver’s license and automobile insurance, Specialty Dental Assistant must have reliable means of alternate transportation which would allow for required, timely travel to multiple offices per day, in some cases several times per day. * Travel may be planned or unplanned and is subject to change without notice. Preferred * One-year certificate from an accredited college or technical school; or equivalent combination of education and experience. Knowledge/Skills/Abilities * Ability to respond to common inquiries from patients, staff, vendors, or other members of the business community. * Ability to draw valid conclusions, apply sound judgment in making decisions, and to make decisions under pressure. * Ability to interact with other Clinicians and Owner Doctors effectively * Ability to interpret and apply policies and procedures. * Ability to read, analyze, and interpret documents such as business periodicals, professional journals, technical procedure manuals, safety rules, operating and maintenance instructions, and governmental regulations. * Ability to communicate effectively and present information, both verbally and in writing, to patients and co-workers. * Ability to interpret a variety of instructions furnished in written, verbal, or diagram form. * Ability to maneuver through basic computer software. * Results Oriented (Energetic self-starter; sets realistic goals; meets commitments; persistent, prioritizes daily to achieve results). * Customer Service Advocate (flexible and adaptive; empathetic; passionate; ethical). * Influencer (active listener/observer of behavior; creates a win/win need for change) * Self-motivated, reliable individual capable of working independently as well as part of a team. * Ability to multi-task effectively without compromising the quality of the work. * Excellent interpersonal, oral and written communication skills. * Ability to handle and maintain extreme confidentially Patient records. * Organized, detail-oriented individual able to work in a fast-paced environment. Benefits • Medical, dental, and vision insurance, • Paid time off, • Tuition Reimbursement, • 401K, • Paid time to volunteer in your local community Responsibilities PDS Health is an Equal Opportunity Employer. We celebrate diversity and are united in our mission to create healthier and happier team members. Qualifications #indeed-regional

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Careers Advancement Opportunities, • Flexible Scheduling Responsibilities • Welcome patients into the treatment area and make them feel comfortable, • Discuss the dental care plan with patients and answer any questions they have, • Prep sterilized equipment and make it available to the dentist for exams and procedures, • Take vital signs and accurately record medical histories, • Perform preliminary exams and collect oral health histories, • Evaluate patients for signs of gum disease, cavities, and infection, • Remove plaque and apply fluoride treatments, • Teach good oral hygiene techniques, • Create dental impressions, • Take x-rays, • Assist dentist during procedures and exams, • Adhere to all health and safety regulations and office policiesQualifications, • Associates Degree from a school certified by the Commission on Dental Accreditation, Bachelors or Masters degree preferred, • Current Dental Hygienist licensure, • At least 1-2 years of experience in dental hygiene, • Strong understanding of HIPAA regulations and all dentistry safety guidelines, • Able to stand for extended periods and bend repeatedly, • Excellent communication and customer service skills

Job Description Work Schedule: Varies not to exceed 29 hours per week; shifts based on operational needs of the organization OVERVIEW Associated Students, Inc. employs student-focused professionals with equity mindsets. Established in 1963, Associated Students, Inc. (ASI) is a non-profit corporation guided by a student board and managed by full-time professional staff. ASI is considered a part of the Cal Poly Pomona Division of Student Affairs, with a dashed reporting line to Administrative Affairs. ASI serves the entire campus population, including over 27,000 students, by providing opportunities for student engagement, student employment, and a multitude of programs and services such as recreation and wellness, student union and activities, student government, and childcare. ASI operational support areas include human resources, financial services, information technology, facilities management, and marketing. ASI is engaged in the work of being a learning organization. Currently, the guiding ideas of the organization are “under construction” as the team re-imagines its vision, mission, and core values. ASI is looking for dynamic team members who value team learning, co-creation, and adaptability to best serve the needs of our students. The Bronco Recreation and Intramural Complex (BRIC) manages the ASI Cal Poly Pomona PADI Education SCUBA Dive Center which primarily focuses on providing on and off-campus scuba experiences and courses for the campus and greater community through a series of regularly scheduled land and water-based workshops, try-its, certification courses, and professional level training. POSITION DEFINITION Under general supervision from the Scuba Coordinator, the SCUBA Instructor I is responsible for promoting the SCUBA program at the Bronco Recreation and Intramural Complex (BRIC). The SCUBA Instructor I is responsible for facilitation of safe, effective, and fun SCUBA-based classes in a group setting and performing skilled tasks requiring moderate on-the-job training, specialized skills, independent judgment, and decision-making. ESSENTIAL DUTIES • Teach structured SCUBA classes appropriate for varying levels of SCUBA certification., • Arrive on time to set up scheduled classes or workshops and ensure that classes begin and end on time., • Clean and organize pool space and the Scuba Shack (including equipment used) after each class., • Ensure proper check-in of participants for instructional courses, workshops, and fee-based programs., • Enforce PADI standards and Safe Diving Practices., • Assist with reporting accurate class participation numbers and required paperwork., • Assist with special events as assigned., • Maintain current knowledge of other ASI (Associated Students Incorporated) and Campus Recreation programs and services., • Maintain open communication with the Scuba Coordinator., • Attend training, meetings, and workshops as required., • Maintain current SCUBA Instructor, CPR/AED and First Aid, and O2 Provider certifications., • Professional Association of Dive Professionals (PADI) Open Water SCUBA Instructor or equivalent., • American Red Cross CPR for the Professional Rescuer or PADI Emergency First Response or equivalent., • American Red Cross, Diver’s Alert Network (DAN), or PADI Emergency Oxygen Provider certification or equivalent., • Demonstrate ability to conduct safe SCUBA excursions to PADI standards, evaluate aquatic conditions and make independent decisions on diving safety., • No PADI quality assurance claims in the previous twelve months., • Outstanding customer service and interpersonal skills., • Demonstrated ability to work with and show inclusivity to an ethnically diverse and culturally pluralistic student population and campus community. POSITION SENSITIVITY Based on the duties and responsibilities of this position, this position has been designated to be a sensitive position with access to sensitive data. A background check (including a criminal records check) must be completed satisfactorily before any candidate can begin employment with Associated Students, Inc., Cal Poly Pomona. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current ASI employees who apply for this position. BACKGROUND CHECK A background check (including a criminal records check) must be completed satisfactorily before any candidate can begin employment with Associated Students, Inc., Cal Poly Pomona. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current ASI employees who apply for this position. MANDATED REPORTING REQUIREMENT In compliance with the California Child Abuse and Neglect Reporting Act (CANRA) and the CSU (California State University) Executive Order 1083, each ASI employee is designated as a mandated reporter and is required to sign an Acknowledgment of Mandated Reporter Status and Legal Duty to Report Child Abuse and Neglect. SYSTEMWIDE SMOKE AND TOBACCO FREE ENVIRONMENT EO 1108 Cal Poly Pomona is a smoke and tobacco-free campus. For policy information, please refer to the following link. COVID-19 VACCINATION CSU, along with Associated Students Inc., strongly recommends all staff who are physically accessing campus facilities or programs to be fully vaccinated against COVID-19, which includes obtaining a COVID-19 booster dose. See policy at .

Job DescriptionCompany Description At Crown Lexus, a Sonic Automotive family dealership, you'll find the opportunities, resources, and support you need to grow and develop professionally. Our 100+ dealerships are concerned with more than moving inventory; they're committed to your success and invested in your future. So read on, and consider a rewarding career with Sonic Automotive, Inc. Salary: $20 / Hour Our associates are happy to work here because: • We boast the lowest turnover in the industry., • We provide award winning training (Training Magazine Top 125, and Brandon Hall Awards)., • We are committed to developing and promoting within the company., • Our benefits are extremely competitive with Medical, dental, vision, HSA, 401k and PTO., • We encourage peer to peer teamwork and recognition., • Special benefits to purchasing and leasing a car. We're proud of what we're doing here. Come and join us! Job Description Duties and Responsibilities: · Submit paperwork to and obtain approval from finance sources on all finance deals. · Ensure that all required documentation is obtained and submitted to the finance source so that finance contract can be paid in a timely manner. · Work with Sales Manager to secure a reasonable profit from every sale. · Check all paperwork for correct title, lien information, taxes, etc. · Establish and meet monthly objectives. · Verify insurance with customers’ agents, obtain deposits, verify trade payoffs. · Must follow all company safety policies and procedures, and immediately report any and all accidents to a manager or supervisor. Qualifications · Automotive dealership experience is preferred · Knowledge of dealership finance and insurance procedures · Some weekend work required · High school diploma or the equivalent · Ability to read and comprehend instructions and information · Degree or commensurate experience in finance · Computer knowledge preferred. · Professional personal appearance. · Excellent communication skills. · All applicants must be authorized to work in the USA. · All applicants must perform duties and responsibilities in a safe manner. · All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test, credit report, and valid driver license. Additional Information It's time to make the most important move of your career. From our cooperative, team-based approach, to our more than 1,000 internal advancements each year, it's easy to see the difference. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. “All your information will be kept confidential according to EEOC guidelines” (The Document Specialist Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $17.00 and $20.00.)

Job DescriptionWhy is it great to work here?Golds Gym is growing fast and looking for a Maintenance Lead, to help us keep our gyms able to provide world class experience to our members. Well challenge your skills, talents and abilities and reward your every success. Here is just some of the benefits you will get by being a Golds Gym employee: • Work with great people everyday, • Free gym memberships and discounts, • Opportunities to grow within the company, • Be a part of the most recognized gym brand in the worldWhat sets us apart from the rest:, • Integrity to build lasting relationships, • Passion for people in the communities we serve, • Pride in what we do and who we are, • Leadership development (ongoing), • Excellence in execution, • But most of all. we are more than a gym; we are a family!!We want talented individuals who:, • Are passionate and take pride in their work, • Can work in a dynamic, fast-paced, environment, • Able to work with various machinery and equipment, • Works great with others, • Can troubleshoot issues quickly and effectively, • Able to handle multiple projects timely and effectively, • Desire to be better than you ever have beforeWhen you come to work, you'll:, • Initiate maintenance and safety programs for a variety of facility equipment, • Be responsible for the preventative maintenance of machinery to include HVAC, • Oversee the cleanliness of our gyms done by our janitorial staff, • Keep compliant and aware of all changes with regulatory agencies like OSHA, • Demonstrate awareness and knowledge of all emergency procedures, • Manage all aspects of the buildings, exterior grounds, equipment, inventory overall facility, • Process and oversee deliveries, • Manage maintenance and janitorial staff, to include housekeeping, • Plan and schedule facility modifications, including cost estimates for the facilityThere are some MUST HAVES:, • High school diploma (Trade School or college work highly preferred), • Ability to achieve aggressive deadlines working accurately at a fast pace, • Ability to read, analyze and interpret complex plans and layouts, • Ability to solve practical problems, • Able to deal with multiple variables, • Organizational skills and attention to details, • Ability to deliver complex topics to management, clients and/or public groupsASK YOURSELF IF YOU HAVE WHAT IT TAKES.. COME BE APART OF THE LEGACY TODAY! Golds Gym provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability or genetics.

Job Description Aperto Property Management, Inc. (Aperto) is more than just a property management company—we are a team dedicated to excellence in the multifamily housing industry. Specializing in both conventional and affordable housing, our mission is clear: to set the gold standard in apartment management across the U.S., providing exceptional service, quality management, and superior results for our clients and residents. What We Offer: Joining Aperto means becoming part of a company that values growth, empowerment, and success. Our property management platform supports a full range of services, from new lease-ups to stabilized assets and acquisition rehabs, ensuring comprehensive and expert support for our properties. We’re committed to giving you a work environment where learning, development, and a positive culture are at the heart of what we do. About the Role: We're seeking a skilled Maintenance Lead to join our team in Pomona, CA. The Maintenance Lead will be responsible for overseeing all maintenance activities for a few properties we manage in Long Beach. A qualified candidate will be experienced in all levels of apartment maintenance, with a well-rounded background in plumbing, HVAC, electrical, appliance maintenance, and training and development of on-site maintenance personnel. Why You’ll Love Working Here: • Career Growth: We empower our team to take the initiative, with a strong focus on learning, development, and career progression., • Work-Life Balance: Enjoy generous paid time off and a supportive environment that values your well-being., • Lead a team of maintenance technicians, ensuring timely and high-quality completion of service requests and preventative maintenance tasks., • Perform hands-on maintenance as needed, including plumbing, electrical, HVAC, and general carpentry repairs., • Develop and implement a preventative maintenance plan to minimize costly repairs and extend the life of equipment and appliances., • Conduct property inspections to identify any issues and develop action plans to address them., • Manage and prioritize maintenance work orders to ensure that urgent repairs are addressed promptly and efficiently., • Coordinate with vendors and contractors for larger projects, including obtaining bids and overseeing the completion of work., • Ensure compliance with all local safety codes, regulations, and policies., • Train and mentor, the maintenance team, providing support, guidance, and opportunities for skill development., • Assist with managing the maintenance budget, ordering supplies, and ensuring inventory levels are adequate., • Respond to emergency maintenance calls after hours as needed., • 2+ years of experience in multifamily maintenance, with at least 1 year in a supervisory or leadership role., • Strong technical skills in plumbing, electrical, HVAC, carpentry, and general property maintenance., • Proven experience leading and managing a team of maintenance technicians., • HVAC, EPA, or other relevant certifications are preferred., • Exceptional organizational and time management skills, with the ability to prioritize tasks and manage multiple projects simultaneously., • Strong communication and interpersonal skills, with a focus on team development and collaboration. Apply Now and discover why Aperto Property Management, Inc. is the place for maintenance professionals who want to make a real impact! Aperto Property Management, Inc. iCalBRE Broker License Number 02042194, Aperto is an equal opportunity employer. Job Type: Full-time Company DescriptionAperto Property Management, Inc. is a full-service, fee-based apartment management company for conventional and affordable multi-housing communities. Our our mission is to simply be the best apartment management company in the United States and to provide quality management, professional service, and superior operating results to our clients and residents. We provide a workplace where our associates are empowered to take initiative, and there is a distinct culture of learning and development. Aperto Property Management, Inc. - CalBRE Broker License Number 02042194- is an equal opportunity employer, and uses E-Verify as part of the I-9 process to verify the work eligibility of all new hires.Aperto Property Management, Inc. is a full-service, fee-based apartment management company for conventional and affordable multi-housing communities. Our our mission is to simply be the best apartment management company in the United States and to provide quality management, professional service, and superior operating results to our clients and residents.\r\n\r\nWe provide a workplace where our associates are empowered to take initiative, and there is a distinct culture of learning and development.\r\n\r\nAperto Property Management, Inc. - CalBRE Broker License Number 02042194- is an equal opportunity employer, and uses E-Verify as part of the I-9 process to verify the work eligibility of all new hires.

Job Description We have an immediate opportunity for Senior Pole Engineer for the Los Angeles area. This position requires management and development of new projects once all data and information are collected. The ideal candidate will play an active role in research and design and will require strategic decision-making process for new projects. This is a hybrid position with two days in the office. Job Duties and Responsibilities • Responsible for managing and developing new projects once data is received., • Ability to lead a team performing structural and line design analysis using PLS-CADD, PLS-Pole, and PLS-Caisson, • Perform as the go-to-expert for modeling and analysis across transmission and distribution, • Oversee QA/QC processing adhering to company safety standards, • Review and design pole foundations, • Provide expert guidance on new installation and the ability to evaluate existing structures, • Responsible for supporting construction activities coordinating with the field teams and the inspectors on various issues which include emergency restoration efforts due to wildfires, storms and other incidents, • Proven leadership, mentorship, guidance, and instruction to the transmission engineering team Education and Experience • Bachelor’s or Master’s degree in Civil or Structural engineering, • California Civil PE license required, • Seven plus years’ experience of technical experience in Transmission and/or Distribution Engineering Compensation based on experience. (Civil, PE, Electrical Engineer, PLS-Caisson, SPIDAcalc, PLS-CADD, G095, NESC, ASCE) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Vision insurance If you like to innovate, are self-reliant with strategic mind thinking, and interested in giving your full potential to this small business, this position may be for you. We are a social and environmental responsible Company. Our commitment to safety, diversity and inclusion is part of our personality. We are looking for highly qulified, proactive, adaptable and motivated Sr Cost Estimator with 10years of experience overseeing multiple complex projects in the electric utility industry with proven record of working independently with minimal supervision. Critical Tasks and Responsibilities • Leads or oversees the development and maintenance of detailed cost estimates for major and/or multi-year projects, including scope take-off, estimate labor, materials, contract, indirect, and allowances, and maintain (and reconcile) various versions of cost estimates, • Leads review process to ensure cost estimates are accurate and structured in a manner that meets major and multi-year projects or program requirements (e.g., work breakdown structure, Continuous Property Records, FERC/CPUC jurisdictional splits, and cost elements/drivers), • Provides consultation or expert advice on complex matters, best practices, and data analysis in areas of cost estimating (e.g. unit pricing, market trends, economic feasibility study), • Perform highly complex analytics and prepare and present results, alternatives, and recommendations to support business decisions, manage project costs and schedules, and mitigate potential risks, • Collaborates with and obtains data/information from various project stakeholders; develops and maintains strong working relationships with team, • Lead assignments or functional team for duration of the work, • Lead or prepare project controls data request responses and work papers in supporting corporate/OU governance (e.g. Business Oversight Team and Capital Review Team), internal/external audits, General Rate Cases, and any pertinent regulatory filings., • Provides training in areas of expertise to develop future project controls professionals. Education • A combination of education, training, and experience, generally equivalent to those typically possessed by a 4-year college graduate, • 10+ years of experience in cost estimating and capital projects/construction, • Demonstrated knowledge and experience with Microsoft Office software and Project Controls and Cost Estimating software, • Preferred: Engineering background or Mathematical backgroundSkills, • Teamwork, • Leadership, • Strong Communication Skills, • Adaptability, • Respect Vacation 10 daysAfter 60 days of employment - employee starts accruing vacation (1 day/month) totaling 10 days/yr2nd year and thereafter employee starts accruing 1 day every 5 weeks, totaling 10 days/yr Paid HolidaysNew Year's DayMartin Luther King DayMemorial DayIndependence Day (4th of July)Labor DayThanksgiving DayChristmas Day Cellphone reimbursement Retirement Account Financial Advisor Medical, Dental, and Vision Insurance, and more Flexible work from home options available.

Job Description Are you a skilled R&R Mechanic with a talent for fast and efficient removal and replacement of automotive components? We’re looking for a dedicated Remove & Replace (R&R) Mechanic to join our team. If you have experience in engine, transmission, suspension, and other major component swaps and can work at a steady pace, we want to hear from you! Key Responsibilities: • Remove and replace engines, transmissions, suspensions, and other major components., • Work efficiently to complete jobs within standard labor times., • Ensure proper installation of new or rebuilt parts., • Maintain a clean and organized workspace., • Minimum 4 years of experience in R&R (Remove & Replace) automotive work., • Ability to handle engine and transmission swaps independently., • Strong mechanical aptitude—diagnostic skills not required, but a plus., • Ability to work in a fast-paced environment and complete jobs on time., • Own basic hand tools (specialty tools provided)., • Competitive hourly pay: $22 - $35 per hour, based on experience., • Health, dental, and vision insurance., • Paid time off and holidays., • Employee discounts on services and parts.

Job DescriptionQA/QC Inspector & CAD Drafter (AutoCAD & SolidWorks) Express Employment Professionals of Rancho Cucamonga is seeking a QA/QC Inspector & CAD Drafter with strong skills in AutoCAD, SolidWorks, and quality inspection. This unique position combines drafting/design responsibilities with hands-on quality assurance to support engineering, production, and fabrication projects. Key Responsibilities Drafting & Design * Create and modify 2D/3D technical drawings and models using AutoCAD and SolidWorks (general arrangement, manufacturing, and installation drawings). * Interpret engineering sketches, specifications, and design inputs to produce accurate documentation. * Collaborate with engineers, designers, project managers, and production teams to ensure feasibility and accuracy. * Revise and update drawings to reflect design changes and improvements. * Prepare Bills of Materials (BOMs), tolerance analysis, and material selection for projects. * Ensure all designs comply with industry codes, safety standards, and company requirements. Quality Assurance / Quality Control * Inspect first articles and finished products to ensure compliance with engineering drawings and specifications. * Perform quality control checks on fabricated and purchased items. * Work with subcontractors to verify compliance with project design requirements. * Document and report quality findings, ensuring corrective actions are taken as needed. * Assist in design reviews, testing protocols, and bid evaluations. Project Coordination * Manage and update project documentation including calculations, drawings, specifications, and equipment lists. * Participate in design reviews, technical discussions, and problem-solving sessions. * Support project management with tracking systems and project checklists. * Prepare operations and maintenance manuals for final project handoff. Required Skills & Experience * 5+ years of drafting/design experience using AutoCAD and SolidWorks. * Bachelor’s degree in Civil Engineering, Structural Engineering, CAD, or related technical field. * Strong understanding of engineering principles, drafting standards, and manufacturing processes. * Proficient in Microsoft Word, Excel, and Outlook. * Excellent attention to detail, organizational skills, and communication (written & verbal). * Ability to work both independently and collaboratively with cross-functional teams. * Awareness of environmental and safety considerations in design and fabrication. Apply Today! Apply online: Call : 909-484-4366 9521 Business Center Dr Ste 101 Rancho Cucamonga Ca 91730 You should be proficient in: • CAD Software, • CAD/CAM Software

Job Description We are seeking a skilled and detail-oriented Mold maker to join our dynamic team. The ideal candidate will possess a strong background in mold design and fabrication, with hands-on experience in various machining processes. As a Mold maker, you will be responsible for creating high-quality molds that meet precise specifications and contribute to the production of our products. This role requires a commitment to safety, quality, and efficiency in a fast-paced manufacturing environment. Responsibilities • Utilize hand tools and machining equipment such as lathes, stamping presses, and electrical discharge machining to produce mold components., • Measure and inspect mold parts using precision instruments like micrometers to ensure accuracy., • Assemble molds according to specifications, ensuring proper fit and function., • Perform welding tasks as needed for mold assembly and repair., • Troubleshoot and resolve issues related to mold production and functionality., • Proven experience as a Mold maker or in a similar role within the manufacturing industry., • Proficiency in CAD software for mold design., • Strong understanding of mold assembly techniques and the use of hand tools., • Experience with micrometers and other precision measuring instruments is essential., • Ability to work independently as well as part of a team in a fast-paced environment.

Job Description About the Role: We are seeking a detail-oriented and motivated FSQA Technician to join our Food Manufacturing team. This role plays a critical part in ensuring that our products meet the highest standards of quality, food safety, and regulatory compliance. The FSQA Technician will support daily operations by monitoring processes, conducting inspections, and verifying adherence to company, customer, and regulatory requirements. Key Responsibilities: * Perform quality and food safety checks throughout the production process (raw materials, in-process, and finished goods). * Collect, label, and analyze samples to verify product quality and compliance. * Conduct pre-operational and operational inspections, including sanitation and GMP audits. * Monitor and document CCPs (Critical Control Points) and process control checks to ensure compliance with HACCP programs. * Verify calibration of production and lab equipment. * Assist in investigations of deviations, non-conformances, and customer complaints. * Maintain accurate, timely, and detailed records of all testing and inspections. * Support FSQA team with audits (internal, customer, regulatory) and corrective actions. * Collaborate with production, sanitation, and maintenance teams to ensure compliance with food safety standards. * Promote a culture of food safety and continuous improvement within the facility. Qualifications: * High School Diploma or GED required; * 1–3 years of experience in food manufacturing, quality, or food safety role preferred. * Familiarity with HACCP, GMPs, and food safety regulations (FDA, USDA, SQF, BRC, or similar). * Strong attention to detail and ability to follow written procedures and protocols. * Basic computer skills; proficiency in Microsoft Excel and data entry. * Ability to work in a fast-paced manufacturing environment and on your feet for extended periods. * Excellent communication and teamwork skills. Company DescriptionFull Staffing company established since 2004.Full Staffing company established since 2004.

Job Description The Engineering Team at Russell Tobin & Associates is supporting a world-class organization that has an opening for “Senior Engineer V”. Apply today for early consideration ! Senior Engineer V Pomona, CA United States Duration: 04+ Months Pay rate: $ 90-$97/Hour Job description: Day-to-Day Responsibilities/Workload: • Perform structural and line design analysis using PLS-CADD, PLS-Pole and PLS-Caisson serving as the go-to expert for modeling and analysis across transmission and distribution., • Ensure quality and safety compliance by overseeing QA/QC processes and adhering to company and site-specific safety standards., • Review and design pole foundations, providing expert guidance on both new installations and evaluations of existing infrastructure., • Support construction activities by coordinating with field teams to resolve design-related issues, conducting field inspections, and assisting with emergency restoration efforts due to wildfires, storms, or other incidents., • Maintain and update design specifications, collaborating with cross-functional teams to deliver support to internal and external stakeholders., • Provide leadership, guidance and instruction to company's transmission engineering practice, mentor and guide less experienced engineers. Required Skills/Attributes: • Bachelor's (or Master's) degree in civil/structural engineering, • California Civil PE License required, • Seven or more years of technical experience in transmission and/or distribution line engineering design., • Engineering experience with Electric Utility Distribution and Transmission Systems using California GO95, NESC and ASCE codes and guidelines., • PLS-CADD, PLS-Pole, AutoCAD Desired Skills/Attributes: • PLS-Caisson, • SPIDAcalc Benefits: Russell Tobin offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. #LI-HA2 #rta-zr JD-#SCIENCE #RTA

Job Description Job description We are looking for a competent dental assistant who will make the dentist’s office more efficient and pleasant for patients. You’ll ensure excellent customer service and lift administrative and basic dental tasks off the dentist’s shoulders. Dental assistants should be well-organized with great attention to detail. You should be able to follow instructions and respect dental office regulations. We want you to be skilled in providing direct or indirect patient care and able to make office procedures as smooth as possible. Responsibilities • Welcome customers in the dental office, • Prepare customers for treatments or checkups ensuring their comfort, • Select and set up instruments, equipment and material needed, • Prepare and clean/disinfect the rooms for hygienist and dentist., • Sterilize instruments according to regulations, • Assist the dentist through 4-handed dentistry, • Undertake lab tasks as instructed, • Provide oral hygiene and post-operative care instructions, • Keep the dental room clean and well-stocked, • Schedule appointments, • Proven experience as dental assistant, • Knowledge of dental instruments and sterilization methods, • Understanding of health & safety regulations, • Ability to perform regulated non-surgical tasks like coronal polishing is a plus, • Good computer skills, • Excellent communication and people skills, • Attention to detail and ready to learn, • Well-organized and reliable, • High school diploma; graduating from dental assistant school is preferred Salary: $19.00 - $22.00 per hour Expected hours: 24 per week Benefits: • Dental insurance, • Employee discount, • 8 hour shift, • English (Preferred), • X-Ray Certification (Preferred) Application Questions How many years of dental assistant experience do you have? What is the highest level of education you have completed? Are you able to work in La Verne, CA 91750? Do you have the following license or certification: X-ray? Do you speak English? Do you speak Spanish? Are you authorized to work in the following country: United States? Are you willing to undergo a background check, in accordance with local law/regulations? When are you available for an interview or phone screen? Please list 2-3 dates and times or ranges of times. Company DescriptionOur Office is equipped with the latest technology to provide excellent care, and all the recommended personal protection equipment to keep our staff and patients safe.Our Office is equipped with the latest technology to provide excellent care, and all the recommended personal protection equipment to keep our staff and patients safe.

Job Description Jacuzzi Group, a leader in the manufacturing of hot tubs, swim spas, baths, showers, saunas, and pool equipment, is seeking a skilled Mold Technician to join our team in Chino, CA. As a Mold Technician, you will play a crucial role in the production of high-quality products by ensuring that molds are properly maintained, created, and operating efficiently. Key Responsibilities: • Intermediate-level toolmaker responsible for creating new molds, as well as modifying and repairing current molds., • Conduct regular inspections and maintenance of molds to ensure optimal performance., • Execute intermediate resin procedures, including sanding and drilling molds, as well as fabricating trim tools, templates, and jigs., • Ensure molds are cleaned and stored properly after use to prevent damage, • Operate machinery to test molds before sending to production., • Work closely with Engineering and Quality staff to improve overall efficiency of tools., • Follow all safety protocols and maintain a clean and organized work area., • Schedule: Monday-Friday, 2nd shift 12:30-9:00 pm Compensation is $24+/hr. depending on experience Requirements • Minimum of 2 years of experience working with molds in a manufacturing environment., • Familiar with tooling equipment, materials, and processes used in a mold shop., • Willingness to wear respirator and other required personal protective equipment (PPE) as necessary., • Proficient in use of measuring devices such as rulers, calculators and perform shop math, • Strong mechanical aptitude, • Excellent attention to detail and commitment to quality., • Ability to work effectively both independently and as part of a team., • Good communication and interpersonal skills., • Physical ability to lift and move heavy molds (up to 75lbs) as required., • Must have prior manufacturing experience; preferred experience operating vacuum forming machinery, fiberglass process, autobody or FRP (Fiber reinforced plastic), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionTECHNICAL SUPPORT REPRESENTATIVE Renogy aims to become a global leader of independent clean energy solution. We are seeking and empowering talents to build a team of world-class product innovation and development by fully leveraging clean energy ecosystem to better engage with customers to drive clean energy love and product innovation. From small power banks to complete solar kits, we pride ourselves on supplying top-of-the-line off-grid solar equipment. Position Overview: Renogy is seeking to hire Technical Support Representative to assist and improve our customer experience. The Ideal candidate will have a passion for D/C electronics and will be able to excel in a high paced environment. Under general supervision, in an in-bound call center/office environment, a technical support representative will provide technical support to our Renogy Vendors and End-users by performing a question-based diagnosis while guiding users through step-by-step solutions. Solutions include but are not limited to Installing and powering down solar systems, verifying proper installation of solar components such as solar panels, charge controller and battery systems. Representative will also assist with troubleshooting using traditional testing methods such as continuity and polarity tests. Support must always be provided by clearly communicating technical solutions in a user-friendly and extremely professional manner. Technical Support Representative will assist with solar system design, placing orders on our Renogy portal and assist with any installation questions. Duties and Responsibilities: • Deliver service and support to end-users and Renogy Dealers via phone, email, or internal case management system., • Interact with customers to provide and process information in response to queries, concerns and requests about products and services., • Diagnose and resolve technical hardware and software issues involving connectivity, performance and educating end-users on functionality and capabilities of respective components., • Post-sales support including installation and wiring of components. Software training, first time set up, installation walk-through, troubleshooting and execution of warranties., • Accurately provide technical solutions and record all customer interactions and call transactions on computer and designated tracking software (Salesforce), • Offer alternative solutions where appropriate with the objective of retaining customers' and clients' business, • Organize ideas and communicate oral messages appropriate to listeners and situations, • Follow-up and make scheduled call backs to customers where and when necessary., • Minimum AA degree, • 2+ years of equivalent professional, • Knowledgeable of solar components and basic troubleshooting procedures, • Good organizational, follow-up and time management skills, • Able to communicate pleasantly and effectively both written and verbal, • Team player with positive and proactive attitude, • Handy and quick in responding and resolving issues, • Will sit, stand, or walk short distances for up to the entire duration of a shift, • Will climb stairs on an occasional basis, • Will lift, push, or pull up to 40 pounds on an occasional basis, • Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis, • Must be able to comply with all safety standards and procedures, • May reach above shoulder heights and below the waist on a frequent basis, • May stoop, kneel, or bend, on an occasional basis, • Other duties as assigned The equal employment opportunity policy of the Renogy provides for a fair and equal employment opportunity for all employees and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state, and local law. Renogy hires and promotes individuals solely based on their qualifications for the job to be filled. Renogy reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and employees. Renogy also provides a work environment in which each employee can be productive and work to the best of his or her ability. We do not condone or tolerate an atmosphere of intimidation, bullying, discrimination, or harassment. We expect and require the cooperation of all employees in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all employees and applicants.

Job Description We have an immediate opportunity for Senior Structural Engineer for Transmission Towers for the Los Angeles area. This position requires management and development of new projects once all data and information are collected. The ideal candidate will play an active role in research and design and will require strategic decision-making process for new projects. This is a hybrid with at least two days in the office on Wednesday and Thursdays required. Job Duties and Responsibilities • Responsible for management and developing new projects once data is received, • Ability to lead a team performing structural engineering tasks related to lattice towers in complex transmission line projects for the structure and foundation, • Perform and act as the go-to-expert in PLS Tower analysis and/or modeling of existing and new Lattice Tower following client’s guidelines, • Responsible to act as a subject matter expert in design or review of existing Transmission line foundations (Drilled concrete shaft, direct embed, Micro pile and Grillage) using FAD Tools, hand calcs or similar programs, • Experience performing Transmission line structural Load calculations based on NESC, G095 and other applicable codes, • Build effective relationships with other responsible entities, • Oversee QA/QC processing adhering to company safety standards, • Provide expert guidance on new installation and the ability to evaluate existing structures, • Responsible for leading construction administration efforts including supporting construction activities coordinating with the field teams and the inspectors on various issues which include emergency restoration efforts due to wildfires, storms, and other incidents., • Proven leadership, mentorship, and guidance, and instruction to the transmission engineering team Education and Experience • Bachelor’s or Master’s degree in Civil engineering, Structural preferred, • California Civil PE license required, • California SE (Structural) preferred, • Seven plus years’ experience of technical experience in Transmission and/or Distribution engineering, • Engineering experience with Electric Utility Distribution and Transmission Systems using G095, NESC, and ASCE codes and guidelines with PLS-TOWER, PLS-CADD, FAD TOOLS Upon a conditional job offer, a drug test and background check will be required. Compensation based on experience. (Civil, PE, Structural Engineer, NESC, ASCE, PLS-CADD, G095, PLS-TOWER, Towers) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description JOB ID: 11318994/993 Position: Clinical Laboratory Scientist Shift Schedule: : Shift: 14:00-22:30 (58) Location: Upland, CA Start date:10/20/2025 -01/17/2026( 12 weeks ) Pay: 50$ to 55$ depending on experience. Job Summary: We are seeking a skilled and detail-oriented Clinical Laboratory Scientist (CLS) to join our team at our Upland facility. The CLS will perform a variety of complex laboratory tests to assist physicians in diagnosing, treating, and preventing disease. This role requires accuracy, strong technical skills, and adherence to established laboratory policies and procedures. Responsibilities: • Perform and interpret laboratory tests in hematology, chemistry, microbiology, immunology, and other areas as assigned., • Ensure accuracy and validity of test results by following quality control procedures., • Operate, calibrate, and maintain laboratory instruments and equipment., • Prepare specimens, reagents, and solutions for analysis., • Document and report test results promptly and accurately in the LIS (Laboratory Information System)., • Adhere to CLIA, CAP, OSHA, and state regulatory guidelines., • Collaborate with physicians, nurses, and other healthcare providers regarding test results., • Maintain laboratory safety and infection control standards., • Train and guide laboratory assistants, technicians, or students when necessary. Qualifications: HOSPITAL GENERALIST. EVERY OTHER WEEKEND At least 5 years' experience. • Valid California Clinical Laboratory Scientist (CLS) license required., • Bachelor’s degree in Medical Technology, Clinical Laboratory Science, or related field., • Previous clinical laboratory experience preferred., • Strong knowledge of laboratory equipment, testing procedures, and regulatory compliance., • Excellent attention to detail, organizational, and problem-solving skills., • Ability to work independently and as part of a team in a fast-paced environment. Precision Scans is an equal-opportunity employer, committed to cultural diversity. Precision Scans will provide equal consideration for employment to all qualified applicants without regard to their race, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, domestic partner status, or medical condition.

Job Description Automotive Technician Job Summary We are looking for a reliable and knowledgeable automotive technician. In this role, you will inspect and repair vehicles and make recommendations for automotive repairs and maintenance. You will also answer customer questions, inform customers about shop products and services, and adhere to vehicle safety protocols. Automotive Technician Requirements and Qualifications • High school diploma or GED required, • Vocational or postsecondary program completion preferred, • ASE Certification preferred, but not required, • At least 3 years of previous experience in a related role, • Check vehicles to ensure compliance with state inspection requirements, • Perform routine automotive maintenance, such as oil changes and tire rotations, • Identify pre-existing and potential vehicle malfunctions, • Work with manufacturers to order inventory, • Coordinate with insurance companies to complete sponsored repairs, • Inform customers about promotional products and services, • Test vehicle parts prior to installation/repair, • Keep accurate records of completed and outstanding jobs, • Consistently meet deadlines for completed work

Job Description Protect. Investigate. Resolve with Integrity. At Rebel Convenience Stores, we fuel more than just cars—we fuel trust, safety, and accountability. We’re looking for a Risk & Claims Investigator to join our Loss Prevention/Claims Department at our corporate office in Upland, CA. In this role, you’ll be the front line of protection, investigating liability, property damage, and carwash-related claims across our convenience store and fuel station network. If you have an investigative mindset and thrive on uncovering facts, assessing risk, and driving fair resolutions—you’ll feel right at home here. What You’ll Do * Lead thorough investigations into: * General liability claims (slip/trip/falls, customer injuries) * Property damage incidents (customer or vendor-caused damage) * Carwash incidents (vehicle damage claims) * Collect and evaluate evidence, including surveillance footage, interviews, and reports. * Prepare detailed investigative reports to support claims evaluation and litigation. * Spot red flags: identify fraud indicators, negligence, or liability exposure. * Collaborate with the General Liability Claims Manager, attorneys, carriers, TPAs, and store staff. * Keep meticulous records in the claims system. * Assist with claimant communication and follow-up to support resolution. What You Bring * 2+ years of investigative experience (law enforcement, private investigation, insurance claims, loss prevention, or risk management). * Strong analytical and critical thinking skills with the ability to uncover root causes. * Professional communication skills for interacting with claimants, employees, and legal partners. * Excellent written and verbal reporting skills. * Proficiency with Microsoft Office (Excel, Word, Outlook). * Familiarity with surveillance video systems (preferred). * Bachelor’s degree preferred, or equivalent experience. * Calm under pressure, detail-oriented, and a collaborative team player. Why Join Rebel? * Play a key role in reducing risk and protecting assets for a growing national brand. * Work on a diverse range of claims investigations—no two cases are the same. * Collaborate in a supportive, growth-oriented environment. * Competitive salary + comprehensive benefits package. Ready to put your investigative skills to work? Apply today and become a trusted partner in driving fair, thorough, and effective claims resolution at Rebel Convenience Stores. ⚖ Rebel Convenience Stores is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary: Under general supervision and according to established policies and procedures, the Mammography Technologist will perform diagnostic scanning procedures to capture consistent and high-quality breast images. Essential Functions of a Mammography Technologist: • Uses specialized equipment to capture breast images and ensures accuracy., • Explains mammogram procedures to patients, addressing their concerns and anxieties., • Positions patients for exams, ensuring comfortable and accurate positioning., • Monitors the condition of patients in the department and assists the radiologist or other physicians in performing needed medical attention., • Review and evaluate the quality of breast images., • Performs clerical work related to the obtaining of previous reports, X-ray films, etc., • Ensures the safety of both patients and staff by adhering to radiation protection measures., • Maintains accuracy of patient records and documentation related to mammogram procedures., • Possesses a skilled level and working knowledge of Mammography scanning technology., • Competency in instructing fellow Mammography Technologists in the art of scanning., • Ability to communicate with radiologists and other healthcare providers about images and patient care., • Demonstrates skill and knowledge to identify abnormalities while performing Mammography scans., • Initiative to obtain additional scans, views, or extremely technical factors to provide maximum information for the radiologist to make an accurate diagnosis., • Maintain sensitivity to physical and psychological needs of patients, • ARRT(M) Certification, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • PTO for full-time employees, • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances, • 401(k) Retirement Plan, • Employee Assistance Program, • Full-time, • Onsite At Rezolut, compensation offers are determined based on the specific circumstances of each role and candidate. While it is not typical for an individual to be hired at the high end of the range for their role, the offer extended to the successful candidate will be influenced by a variety of factors including job-related knowledge/skills, experience, geographical location, and internal equity. We are committed to pay transparency and adhere to all applicable federal, state, and local pay disclosure laws.

Job Description JG Companies has been a leader in the construction industry serving a diverse range of construction markets since 1979. Our firm maintains its reputation upon our core values, building a culture that encourages our people to lead from the bottom up. JG is looking for great people who: • Believe in the core values, the culture, and encourage other team members growth and success., • Takes initiative. Our firm believes in bottom-up management. We rely on our people in all positions to lead, provide input and constructive feedback., • Enjoy what they do. Be optimistic and bring a positive attitude to our company culture and environment. The Payroll & Human Resource Manager will oversee HR functions across all divisions of the company, with a primary focus of managing and processing payroll. This role is heavily centered around ensuring accurate, timely and compliant payroll operations while also supporting leadership and staff by maintaining compliance, driving culture, and improving operational performance. This position plays a vital role in managing the employee lifecycle, maintaining accurate records, and ensuring smooth payroll and HR operations. Expectations: Strive for growth and excellence together. The success of our firm and satisfaction of our clients, starts with the people our team while the success of the people of our team, starts with teamwork. At JG, we are going far together, not fast alone. Teamwork is the critical element that drives the synergy of our divisions working together. • Be the underdog & strive for growth and learning., • Always act like its day 1. Give your best every day., • Take pride in where you work and what you do., • Maintain accurate HR documentation, personnel files, job descriptions, and organizational charts., • Support onboarding/offboarding processes and maintain related documentation., • Support with recuriting., • Process bi-weekly payroll accurately and on time, including timecard review and coordination with accounting., • Assist in benefit enrollments, changes, terminations, and liaise with brokers and carriers., • Process and track leave of absence requests and workers’ compensation claims., • Coordinate training programs and certifications; maintain logs and expiration alerts., • Assist leadership with recruitment, hiring, and interview processes., • Process wage verifications, EDD claims, and unemployment documentation., • Track performance reviews, training attendance, and safety program participation., • Enforce company policies and help maintain a positive work environment., • Support safety program requirements including reporting and recordkeeping., • Manage compliance with labor laws and assist with employee relations., • Facilitate HR audits and special projects as needed., • 5+ years of Human Resources experience, preferably in the Construction industry., • Payroll processing experience required, knowledge of wage and hour laws., • Experience with ADP is preferred., • Working knowledge of California labor laws and HR best practices., • Strong organizational and documentation skills., • Proficient in Microsoft Office Suite (Word, Excel, Outlook)., • Excellent verbal and written communication., • Strong interpersonal skills and a collaborative mindset., • Ability to multi-task and possess strong attention to detail and time management skills., • Professional with a friendly and positive attitude towards change., • Demonstrates strong attention to detail and problem solving., • Have the willingness and know-how to make things happen., • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401k retirement plan, • Vacation and sick time, • Holiday pay

Job Description PRODUCT SOLUTION MANAGER Renogy aims to become a global leader of independent clean energy solutions. We are seeking and empowering talents to build a team of world-class product innovation and development by fully leveraging clean energy ecosystem to better engage with customers to drive clean energy love and product innovation. Our goal is to empower sustainable living and energy independence by developing the world's most plug & play renewable energy products for mobile living (off-grid), home energy storage and industry applications. Position Overview: The Product Solution Manager plays a pivotal role in ensuring seamless integration of technical solutions with customer requirements, acting as the primary bridge between sales, customers, and product development teams. This position is responsible for designing and delivering customized product solutions, providing expert pre- and post-sales technical support, and developing standardized solutions for various application scenarios. Additionally, the role involves leading a team to address technical challenges, creating actionable insights from market and customer feedback, and contributing to the alignment of product strategies with real-world needs. The ideal candidate combines a robust technical foundation, strategic problem-solving skills, and strong leadership abilities to drive team success and elevate customer satisfaction. Duties and Responsibilities: This role entails taking a lead in various projects and day-to-day company operations, with a focus on solution design for product solutions. Key responsibilities include, but are not limited to: -Collaborate with the sales team to understand customer requirements and provide customized product recommendations and solutions that align with client needs. Deliver technical presentations and demonstrations to prospective customers. -Engage with clients to gather and analyze technical requirements, ensuring that solutions meet their business needs. Act as a technical liaison between customers and product development teams. -Develop and design standard product solutions for various scenarios (e.g., RVs, marine applications, solar energy systems, etc.), ensuring optimal system performance and compatibility with other components. -Regularly communicate with stakeholders, ensuring they are informed of product updates, potential technical challenges, and new solution designs. -Monitor market trends and competitor activities to provide detailed analysis and reports to stakeholders, offering insights into the market landscape, product positioning, and competitive environment. Use these findings to support the alignment of product development strategies with real market conditions and opportunities. -Provide expert-level post-sales technical support, assisting customers with diagnosing and resolving technical issues. -Maintain detailed records of customer interactions and issue resolutions; Provide feedback to the product team based on customer experiences to inform future product improvements and innovations. -Work closely with R&D, product management, and quality teams to continuously improve product performance and address any technical issues. -Collaborate with the Training Manager to review and enhance training programs, ensuring technical accuracy and alignment with customer needs and company objectives. -Deliver internal and external training sessions as needed to support sales teams, channel partners, and end-users. -Lead, mentor, and manage a diverse team of professionals, including specialists in technical support, product applications, and training. -Oversee task prioritization, resource allocation, and workload balancing to ensure team efficiency and productivity. -Define and implement team KPIs that align with company business objectives, ensuring clear accountability and measurable outcomes for team performance and contributions to organizational goals. -Monitor team performance, provide feedback, and implement development plans to support individual growth and overall team success. Others -Other duties as assigned Qualifications: • Bachelor's degree in engineering or a related technical field. A master's degree is a plus., • Minimum 5 years of experience in product solutions, technical support, or a related role., • Strong knowledge of solar energy systems, battery technologies, and related components (e.g., inverters, charge controllers, etc.)., • Experience in system design and solution development for applications like RVs, marine systems, and residential or commercial off-grid solutions., • Ability to exercise strong organizational, problem-solving, and analytical skills., • Excellent communication and interpersonal skills, with the ability to explain complex technical concepts to diverse audiences, including customers, internal teams, and stakeholders., • Strong leadership, team development and management abilities, with experience guiding cross-functional teams or direct reports., • Process driven while finding long-term solutions., • Willingness to travel as needed for customer visits, training sessions, or collaboration with other teams., • Passion for clean energy, promoting sustainability. Physical Requirements: -Will sit, stand, or walk short distances for up to the entire duration of a shift -Will climb stairs on an occasional basis -Will lift, push, or pull up to 40 pounds on an occasional basis -Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis -Must be able to comply with all safety standards and procedures -May reach above shoulder heights and below the waist on a frequent basis -May stoop, kneel, or bend, on an occasional basis -Ability to wear personal protective equipment is required (including but not limited to, steel toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards) The equal employment opportunity policy of the Renogy provides for a fair and equal employment opportunity for all employees and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state, and local law. Renogy hires and promotes individuals solely based on their qualifications for the job to be filled. Renogy reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and employees. Renogy also provides a work environment in which each employee can be productive and work to the best of his or her ability. We do not condone or tolerate an atmosphere of intimidation, bullying, discrimination, or harassment. We expect and require the cooperation of all employees in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all employees and applicants.

Job Description The OPARC Mission OPARC believes that all individuals deserve the human right to be valued members of society regardless of their intelligence or physical capabilities. OPARC exists to make training, employment, and social opportunities available and to be the champion for thousands of people with disabilities in Southern California. Title: JOB COACH General Statement of Function: The Job Coach provides direct support, training, and guidance to individuals with disabilities in various employment and vocational settings. This role involves assessing individual strengths and challenges, delivering personalized coaching, and promoting skill development to support successful employment outcomes. The Job Coach collaborates with employers, case managers, and other stakeholders to ensure appropriate accommodations, maintain compliance with service plans, and foster inclusive work environments. Responsibilities also include accurate documentation, safety monitoring, and modeling appropriate workplace behavior to help individuals achieve independence and long-term job retention. Essential Functions • Provide direct job coaching and training to individuals with disabilities in both one-on-one and group settings., • Deliver social and vocational skills training using instructional strategies and best practices., • Communicate effectively using verbal, non-verbal, and demonstrational cues., • Promote successful integration and interaction at worksites and in the community., • Apply strong customer service skills when engaging with individuals and employers., • Collaborate with case managers to develop and implement Individual Habilitation Service Plan (IHSP) goals and objectives., • Advocate for individuals and assess needs for reasonable accommodations., • Address barriers to employment such as behavior, hygiene, attendance, and productivity., • Encourage self-advocacy and connect individuals with appropriate resources., • Support individuals in Tailored Day Services (TDS) with discovering internship and job placement opportunities, providing homework assistance and tutoring, transportation training, pre-employment preparation, and individualized support to help them achieve their personal and vocational goals Duties and Responsibilities • Maintain accurate and complete documentation, including daily activity records, goal tracking, emergency drills, skills training, and progress reports., • Model appropriate workplace behavior, techniques, and work ethic., • Monitor safety and quality of work, ensuring adherence to industry standards., • Adhere to the proper care and responsible use of Oparc issued property, tools, and equipment., • Perform other duties and responsibilities as assigned. Physical Requirements • Able to lift up to 25 lbs. independently and assist with two-person lifts up to 50 lbs.; capable of supporting wheelchair mobility., • Physically able to walk and stand for up to 100% of the workday; sit for up to 80%, bend and push/pull for up to 70%, squat up to 25%, and perform repetitive motions up to 80% of the day., • Must be able to work in outdoor environments and indoor warehouse-type settings that may lack heating, air conditioning, and have concrete flooring. Qualifications • High school diploma or equivalent required; A.A. degree and one year of experience in developmental disabilities preferred but not required. Experience in vocational training or teaching is helpful., • Maintains professional appearance by dressing appropriately for assigned work sites and in accordance with Oparc’s dress code policy., • Demonstrates competency in behavior modification techniques, record keeping, confidentiality, math for documentation, written and verbal communication, and problem-solving., • Current CPR and First Aid certification required., • Computer proficient; skilled in Microsoft Outlook, Word, and Excel., • Able to work independently with minimal supervision., • Flexible availability, including potential weekend and evening hours. Reports To: Employment Services Supervisor Schedule: Varied based on program needs; both early morning, evening, and weekend work may be required.

Job Description GENERAL SUMMARY The Sylvan Teacher is responsible for creating a positive personal learning experience for students by teaching students using Sylvan program materials. Using the program materials, the teacher creates balanced and robust learning experiences for students. The Sylvan Teacher evaluates student progress on each assignment, communicates this progress, and works with Center staff to ensure learning is personal for each student. ESSENTIAL JOB FUNCTIONS • Prepares for each instructional session; Gathers and prepares materials as appropriate, • Greets students and initiates instruction to personally engage each student, • Instructs students according to the design of the Sylvan programs, • Manages students, tasks and time to create a balanced and robust instructional session, • Evaluates and records the progress of each student on their program assignment, • Uses praise and encouragement to ensure students are engaged and inspired to learn, • Motivates students with Sylvan tokens given for specific achievements according to the Sylvan instructional management standards, • Records and tracks tokens earned by students, • Manages the conclusion of each instructional session and manages the completion of learning log and transition activities; Supports procedures to ensure student safety and well-being, • Communicates specific student needs to Center staff, • Attends periodic staff meetings and completes ongoing training as needed, • Language Arts and Study Skills Program Teachers:, • Four year degree or equivalent required, • State or provincial teaching credentials (current or expired), • Minimum of one or two years of teaching experience preferred, • Knowledge of phonics and reading comprehension preferred for reading teachers, • Math Program Teachers: Four year degree required in a discipline requiring 3 or more years of college level math • SAT/ACT, Test Prep, and Advanced Reading Skills Teachers:, • Four year degree or equivalent preferred, • Knowledge of general office equipment such as copiers, printers, and office phones, • Proven ability to engage, motivate, and inspire students to learn, • Strong interpersonal and communication skills, • Proven ability to manage multiple tasks and be flexible, • Strong problem solving and customer service skills

Job DescriptionBenefits: • Competitive salary, • Employee discounts, • Health insurance, • Paid time off, • Training & development Reports to: Dentist, Floor Supervisor, and Office Manager Position Overview: At Ocean Dental Group, we provide exceptional dental care to our diverse patients through friendliness and attention to detail. Our team members exemplify humility, mutual respect, integrity, and the highest commitment to patient care. The Dental Assistant (RDA) provides essential support in delivering quality dental care. This role includes patient care, assisting with various dental procedures. Key Responsibilities: Patient Care: o Prepare patients for dental procedures and ensure their comfort. o Educate patients on oral health practices to help them maintain good dental hygiene Dental Procedures: o Assist the dentist during procedures such as fillings, extractions, and Root Canal Therapy. o Handle instruments, provide suctioning, and ensure patients are positioned correctly during treatments. o Taking diagnostic X-rays Instrument Preparation: o Sterilize and maintain dental instruments and equipment to ensure a safe working environment. Administrative Tasks: o Schedule appointments and maintain accurate patient records. o Provide post-operative instructions to patients to ensure proper recovery. Qualifications: • Radiation Safety Certification, • 8 hours Infection Control Certification, • Current CPR certification (BLS or ACLS)., • Previous experience in a dental setting preferred., • Knowledge of dental procedures, instruments, and terminology., • Strong communication and interpersonal skills.Skills:, • Proficient in assisting with dental procedures and performing hygiene tasks., • Excellent organizational skills and attention to detail., • Ability to work collaboratively in a clinical team environment.This description outlines the essential functions and qualifications for the role of a Dental Assistant. This is not a list of comprehensive duties; management reserves the right to assign additional responsibilities.

Job Description The Fitness Instructor / Fitness Trainer will be responsible for running the Planet Fitness group fitness program (PE@PF). This includes assisting new members in the achievement of their fitness goals by designing a simple workout program and instructing them on the proper use of equipment. Fitness Instructor / Fitness Trainer Essential Duties and Responsibilities • Core Fitness Instructor Responsibilities:, • Conduct and run the Planet Fitness PE@PF program, including creating and following the schedule., • Consult with members regarding their fitness goals and instruct them on how to properly and safely use the equipment., • Help to promote our Judgement Free Zone by connecting with members on the club floor, offering assistance and showing support in their fitness journeys while upholding club policies., • Frequently perform a comprehensive walk of all fitness areas to ensure a great member experience. Quickly address issues as they are identified., • Create bi-weekly updates consisting of a variety of exercises., • Meet class requirements based on club size and member traffic., • Respond to member questions and concerns in a timely and professional manner and elevate to Assistant Manager or Manager as needed., • Assist in front desk related activities including:, • Answer phones in a friendly manner and assist callers with a variety of questions., • Check members into the system., • New member sign-up., • Take prospective members on tours., • Facilitate needed updates to members accounts., • Assist in maintaining the neatness and cleanliness of the club., • Cleaning and sanitizing of all exercise equipment and Black Card spa amenities., • Perform a comprehensive walk of all club areas; quickly fix any safety/policy issues and address cleanliness concerns., • Previous Fitness Trainer/Instructor experience preferred., • Nationally Certified Training Certificate required., • A passion for fitness and health!, • Upbeat and positive attitude., • Punctuality and reliability is a must., • Exceptional customer service skills; able to interact in a positive and professional way with members and co-workers, exceeding the members expectations., • Strong listener with the ability to empathize and problem solve., • Demonstrate diplomacy in all interactions while using appropriate behavior and language., • High School diploma/GED equivalent preferred., • Must be 18 years of age or older.Fitness Instructor / Fitness Trainer Physical Demands, • Continual standing and walking during shift., • Continual talking in person or on the phone during shift., • Must be able to occasionally lift up to 50 lbs., • Will encounter toxic chemicals during shift., • Moving self in different positions, including bending, climbing, balancing, kneeling, crouching, and twisting, to accomplish tasks.Why Join Planet Fitness? Philosophy We are here to provide a unique environment in which anyone, and we mean anyone, can be comfortable. A diverse, Judgement Free Zone where a lasting, active lifestyle can be built. Our product is a tool, a means to an end; not a brand name or a mold maker, but a tool that can be used by anyone. We seek to perfect this safe, energetic environment, where everyone feels accepted and respected. We as employees take pride in the fact that we are a non-intimidating, welcoming gym. Unlike most traditional gyms, Planet Fitness does NOT cater towards bodybuilders or power lifters, but is instead focused on general fitness. We strive to provide a comfortable atmosphere for EVERYONE in what we call the Judgement Free Zone (JFZ). Mission Statement At PF Supreme, weve worked hard to become one of the largest franchisee groups in Planet Fitness, the most recognizable name in the fitness industry. We strive to create a fun and respectful environment, where our team of motivated individuals can learn and grow just as quickly as our organization. Our purpose is to continuously expand the Planet Fitness brand, better the lives of our team with fulfilling career, and truly deliver the Judgement Free experience to our members. We believe by being passionate in our work and fearless in our approach, that our potential has no limits. Job Benefits include Free Black Card gym membership. Career growth opportunities. Discounts on merchandise sold at the club. Benefits including: medical, 401k, and supplemental insurance. Discounts on movie tickets, theme parks, hotels, attractions, and much more.

Job Description Reports to: Food Safety Quality Assurance Team Lead Summary Duties include but are not limited to assisting and reporting to the QA lead and management in ensuring first article inspections (startup) for each line are performed adequately and in a timely manner, observing production runs and interceding when a deviation occurs, enforcing plant GMPs, conducting raw material, in-process ingredient, and finished product quality checks, reporting deviations to management, ensuring Analytical Chemistry Laboratory complies with Good Laboratory Practices, documenting findings, and taking actions as required. Essential Duties & Job Responsibilities • Oversee line startup meets all product specifications and parameters of the line startup after the rooms and equipment have been released from Pre-ops., • Assist in first level troubleshoot of all in-line detection, including Metal Detector, X-Ray and Checkweigher., • Escalate to relevant personnel in a timely manner if in-line detection systems are not operating properly, • Serve as main backup for coverage during line startup for QA technician absences, • Serve as backup for QA Receiving and QA Shipping in case of absences, • Ensure analytical chemistry laboratory supplies are replenished and laboratory complies with Good Laboratory Practices, • Collaborate with QA lead and management to resolve all reported deviations from Good Manufacturing, • Practices (GMP), Safe Quality Food (SQF) standards, and specification requirements., • Report all deviations from Good Manufacturing Practices (GMP), Safe Quality Food (SQF) standards, and specification requirements immediately to the supervisor/manager, • Follow the Good Manufacturing Practices (GMP), Safe Quality Food (SQF) standards, and safety rules (including Personal Protective Equipment -PPE); enforce all of these practices, standards, and rules with all employees, • Conduct GMP inspections in all areas and ensure adherence to Food Safety, Quality, and Cleanliness is maintained, • Report all deviations from product specifications and parameters immediately to Quality Management, • Report unsafe work conditions to management in real-time, • Report any deficiencies that may pose a food safety threat to management as soon as they are observed, • Create and place hold tags with physical count and detailed report of the incident, • Calibrate thermometers, scales, and other lab equipment, • Perform and sign off on pre-operational inspection for line clearance, • Ensure formulas are present for all product runs, • Ensure & review that all formulas are followed on the production floor., • Inspect raw material coming into production for quality and spec adherence, • Report to work on time as scheduled and to/from lunch and breaks, • Must be able to take on other responsibilities that are not part of their regular tasks in the event it is deemed necessary., • QA Technician is backed up by QA Team Lead or QA Supervisor. Food Safety and Culture Expectations • Adheres to all Food Safety/Quality SOPs, • Communicates and assists in resolving any known or suspected Food Safety/ Quality issues to management or direct supervisor., • Attends Food Safety/Quality training sessions as required Minimum Qualification Requirements • 1-2 years in Quality Control in a food manufacturing facility, • High school diploma or equivalent, • A degree in Food Science, Microbiology, or Chemistry preferred, • Proficient in Microsoft Word, Excel, access, and e-mail, • Must have the ability to read, write and communicate effectively in English, bilingual in Spanish preferred, • Demonstrate knowledge of Good Manufacturing Practices policies and procedures as well as GLPs and GDPs, • HACCP and PCQI certified preferred, • Able to perform mathematical calculations including addition, subtraction, division, multiplication, ratios, and percentages, • Able to follow written or verbal instructions, • Demonstrate good written and verbal communication skills, • Must efficiently utilize time and be able to work with minimal supervision, • Detail-oriented, • Strong organizational skills and ability to meet deadlines, • Must be able to prioritize and handle multiple projects at the same time, • Able to work independently or in a team environment, • Able to work flexible hours and weekends Physical Demands/work environment • Prolonged Standing/Walking, • Climbing, Crawling, Pushing, Pulling, Lifting (50 lbs.), • Finger-Hand Manipulation (e.g. 10-key, typing), • Able to distinguish colors, • Able to withstand strong odors from the foods being processed, • Able to work in a high-paced, hot, and cold environment for long and/or short periods FLSA Status: Non-Exempt Travel Requirements: None Driving Requirements: None Pre-Employment Applicants must successfully pass a pre-employment background check and drug screen as a condition of any offer of employment to ensure compliance with Drug-Free Workplace policies. Haliburton proudly supports diversity in the workplace and is an Equal Opportunity Employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Powered by JazzHR 1rlE84ojMq

Job Description Job Category: FullTime /Direct-Hire Compensation: $60,000 - $80,000/Based on Experience/Total compensation BBSI has partnered with a well-established Commercial Tow company based in the Inland Empire. Due to our increased volume and growth. We are seeking an experienced Commercial Tow Driver to join our dynamic team! Job Summary: The Heavy-Duty Towing Driver is responsible for the safe and efficient operation of heavy-duty tow trucks used in towing commercial trucks, buses, trailers, and other large vehicles. This role requires strong driving skills, mechanical knowledge, and the ability to respond professionally and promptly to dispatch calls for roadside assistance, recoveries, and accident scenes. Key Responsibilities: • Operate heavy-duty tow trucks and equipment safely and in compliance with DOT and company regulations, • Respond to breakdowns, accident scenes, and vehicle recovery requests in a timely and professional manner, • Tow or transport large commercial vehicles, including tractor-trailers, buses, RVs, and heavy machinery, • Perform light roadside repairs such as tire changes, jump-starts, and lockouts when needed, • Secure vehicles properly using chains, straps, and other safety equipment, • Maintain clear and accurate records of services provided, including photos and customer signatures, • Inspect and maintain assigned vehicle and equipment to ensure safety and readiness at all times, • Communicate with dispatch clearly and consistently, updating job statuses and ETAs, • Maintain a professional appearance and attitude with customers, law enforcement, and coworkers, • Valid CDL (Class A or B) with endorsements as required by state regulations, • Clean driving record and current medical card, • Minimum of 1–2 years of experience in heavy-duty towing preferred, • Strong knowledge of truck recovery, securement methods, and towing techniques, • Ability to lift and maneuver heavy equipment, • Availability to work nights, weekends, and be on-call as needed, • Strong communication and problem-solving skills, • Outdoor work in all weather conditions, • May involve physically demanding tasks and extended periods on-call, • Stability with a well-established company and great company support! BBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. California applicants: to see how we protect your data, visit our website at Company DescriptionBBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. California applicants: to see how we protect your data, visit our website at provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.\r\nCalifornia applicants: to see how we protect your data, visit our website at .

Job Description We are seeking a highly skilled and artistic Aesthetic Nurse Practitioner to join our team in Claremont, CA. This is an on-site role for a professional who is passionate about facial anatomy, aesthetic balance, and delivering exceptional client results. The ideal candidate will be responsible for a wide range of aesthetic services, patient education, and ensuring a luxurious and professional client experience. Key Responsibilities: * Provide comprehensive aesthetic consultations and develop individualized treatment plans for clients, based on their unique aesthetic goals and facial anatomy. * Expertly administer a full range of aesthetic injectables, including neuromodulators (e.g., Botox) and dermal fillers, with a focus on facial balancing and natural-looking rejuvenation. * Operate and manage various lasers and energy-based devices (e.g., Sciton, Lutronic) for treatments such as skin resurfacing, hair removal, and skin tightening. * Perform routine patient exams and screenings to ensure safety and appropriateness for aesthetic procedures. * Educate clients on skin health and preventative care, recommending personalized at-home skincare routines and maintenance plans. * Provide high-end customer care and build lasting relationships with clients through clear communication, empathy, and a focus on satisfaction. * Work collaboratively with other office staff, including aestheticians and patient care coordinators, to ensure seamless client flow and a pleasurable experience. * Maintain accurate and detailed client records, adhering to all medical and legal standards. * Stay up-to-date with the latest trends, techniques, and technologies in the aesthetic industry through ongoing professional development. Qualifications: * Valid Nurse Practitioner license in the state of California. * Master's degree in Nursing (MSN) or a related field. * Extensive experience and demonstrated proficiency in administering aesthetic injectables. * In-depth knowledge of facial anatomy and a strong aesthetic eye for achieving balanced and harmonious results. * Ability to work with and appropriately operate various laser platforms (e.g., Sciton, Lutronic). * Exceptional interpersonal and communication skills, with a focus on patient education and managing expectations. * Proven ability to provide high-end customer care and create a positive client experience. * Ability to work both independently and as a key member of a collaborative team. * Strong organizational skills and attention to detail. Company DescriptionAs California’s top luxury medical spa, our vision is to empower every client to feel confident and radiant, at every stage of life. With advanced aesthetic techniques and a deep commitment to natural, youthful results, our team is dedicated to restoring facial harmony and enhancing individual beauty without compromise. We believe in personalized care, ongoing education, and pushing the boundaries of innovation in skincare and injectables. If you're passionate about aesthetics and want to be part of a team that sets the gold standard in non-surgical cosmetic care, we invite you to grow with us.As California’s top luxury medical spa, our vision is to empower every client to feel confident and radiant, at every stage of life. With advanced aesthetic techniques and a deep commitment to natural, youthful results, our team is dedicated to restoring facial harmony and enhancing individual beauty without compromise.\r\n\r\nWe believe in personalized care, ongoing education, and pushing the boundaries of innovation in skincare and injectables. If you're passionate about aesthetics and want to be part of a team that sets the gold standard in non-surgical cosmetic care, we invite you to grow with us.

Job DescriptionBenefits: • 401(k), • Health insurance PAX Spices & Labs Inc., is a Southern California-based importer, manufacturers rep, and wholesale distributor for exotic and aromatic spices, herbs, oleoresins, essential oils, natural colors, and more. We are looking to expand our own seasonings profile as well as provide customers with the additional service of matching their own seasonings and blends. We are a medium sized operation and continue to grow. Pay Range: $30-$35/hours plus additional benefits Responsibilities • Lead in the development and matching of dry and liquid seasonings using spices and other food ingredients., • This individual will lead concept ideation, investigate and assess ingredients, and collaborate with customers to engage in the development of new seasonings as well as matching customers seasoning requirements., • Lead seasoning and flavor innovation from idea inception through product commercialization., • Provide expertise in expanding product development facility., • Maintain state-of-the-art depth and breadth of knowledge in the areas including food science, seasoning products development, flavor and dairy technology, sensory science etc., • Involvement in product and process development to support seasoning product development and scaling to manufacturing level, • Expertise in nutritional and microbiological analysis to provide nutritional statements, and specifications., • Leverage external and internal experts for key analytical and sensory research, • B.S. & M.S. in Food Science, Food Technology, or Food Chemistry Required, • Minimum One year of postgraduate experience, experience in product development, ingredient research and/or flavor research is required; past experience in seasoning & flavor is preferred, • Basic understanding of product development, sensory science, material technology etc. required, • Proven ability to manage multiple projects and deliver results while overcoming obstacles, being resourceful and cost-effective, • Passion for food is required, previous culinary training is a plus., • Ability to investigate and research certification and other accreditation requirements to maintain compliance with regulatory agencies.

Job DescriptionSummary Job duties may include: management and development of new projects once data collection, research and analysis are executed; active research to design new projects and to prepare and present new ideas to improve current processes which impact the business; researching, collecting, and analysing data for the strategic decision-making process in new project developments. Responsibilities • Perform structural and line design analysis using PLS-CADD, PLS-Pole and PLS-Caisson serving as the go-to expert for modeling and analysis across transmission and distribution., • Ensure quality and safety compliance by overseeing QA/QC processes and adhering to company and site-specific safety standards., • Review and design pole foundations, providing expert guidance on both new installations and evaluations of existing infrastructure., • Support construction activities by coordinating with field teams to resolve design-related issues, conducting field inspections, and assisting with emergency restoration efforts due to wildfires, storms, or other incidents., • Maintain and update design specifications, collaborating with cross-functional teams to deliver support to internal and external stakeholders., • Provide leadership, guidance and instruction to SCE's transmission engineering practice, mentor and guide less experienced engineers. Requirements • Bachelor's (or Master's) degree in civil/structural engineering, • California Civil PE License required, • Seven or more years of technical experience in transmission and/or distribution line engineering design., • Engineering experience with Electric Utility Distribution and Transmission Systems using California GO95, NESC and ASCE codes and guidelines., • PLS-CADD, PLS-Pole, AutoCAD Desired: • PLS-Caisson, • SPIDAcalc

Job Description Overview To provide all necessary and required under-wing and ground support services as contracted by the customer to include, but not be limited to, loading and unloading baggage, cargo, and marshalling. Job Responsibilities: • Marshall aircraft during arrival and departure., • Unload passenger luggage and air cargo, bulk and/or containers/pallets, onto carts and/or dollies., • Unload wheelchairs and child strollers and deliver to designated location., • Provide special handling of luggage/cargo as required/directed., • Deliver passenger luggage to claim area and unload onto conveyor system., • Deliver air cargo to appropriate recipient., • Drive and/or operate ground support equipment to include tow tractors, tow bars, belt loaders, container loaders, baggage tugs, water/lavatory service trucks, aircraft ground power units, aircraft air start units, air stairs, aircraft de-icing units, baggage carts, cargo dollies and passenger vans., • Collect and load mail, live animals, wheelchairs and child strollers onto aircraft., • Perform aircraft cleaning as needed., • Inspect ramp areas adjacent to gate and aircraft for debris and remove/dispose of when found., • Comply with all federal, state, municipal, airport authority and carrier security requirements., • Lift heavy objects that could reach 70 pounds, • Previous ramp experience a plus, • Valid driver's license, • Good communication skills, • Must be able to work in inclement weather, • Flexible to work on various shifts (days, evening, nights, weekends, and holidays), • Excellent Safety awareness Reporting Manager: Manager or Supervisor on Duty. United Service Companies, Inc. and its various affiliated companies (collectively "USC") is committed to providing equal opportunity to all qualified employees and applicants. USC strictly prohibits and does not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, marital status, national origin, citizenship, covered military service status, ancestry, age, physical or mental disability, medical condition, genetic information, or any other characteristic protected under applicable federal, state or local law. USC further strictly prohibits retaliation against any person for reporting discrimination or harassment, or for participating in a discrimination or harassment investigation. Our policies apply to all aspects of the employment relationship, including without limitation recruitment, hiring, training, promotion, transfer, compensation, benefits, discipline and termination

Job Description We believe in keeping beauty, Naked. Bringing lavish and affordable experiences to anyone and everyone who simply desires it. Through a minimalistic, personalized approach to aesthetics, we are redefining wellness and creating a world where changing the meaning of beauty is our declaration. Because when you look good, you feel good. We are currently seeking Nurse Practitioners or Physicians Assistants who are interested in working for our team on site in Newport Beach! NOT REMOTE Requirements Responsibilities • Perform patient evaluations, this includes but not limited to - Good Faith exams, medical history, patient desired results, treatment plans and explanation of aesthetic results, risks and benefits., • Maintain accurate medical documentation, such as patient charting., • E-Prescribing medications if indicated as part of the treatment plan., • Prioritize patient safety above all else., • Honor and respect the diversity of our patients and their individual rights to care., • Acknowledge and remedy mistakes and seek to maintain and advance your skills and understanding within the industry., • Must be available Fri/Sat, • NV, TX, TN licenses are a plus., • On site in Newport Beach., • If interested in PT: Fri+Sat +1 weekday set schedule, • If intersted in FT: Fri+Sat +3 weekdays Skills • Proven experience as a Nurse Practitioner or Physicians Assistant, • Knowledge of aesthetic nursing care methods and procedures, • Knowledge of health and safety guidelines and procedures, • Strong organizational and multi-tasking skills, • Patient with excellent problem-solving skills, • Valid license

Job Description Job Summary: We are looking for an organized, people-focused Onsite Supervisor You will also assist in client catering logistics and serve as the primary onsite contact for both employees and management. Key Responsibilities: • Act as the primary point of contact between the client and the staffing agency, ensuring excellent customer service and responsiveness., • Coordinate with the client on daily and weekly staffing needs, including scheduling, recruiting, and onboarding., • Manage full-cycle recruiting: sourcing, screening, onboarding, and training new hires., • Add new starts to the time clock system and ensure daily timekeeping is accurate., • Collect and verify timesheets for payroll processing; resolve payroll inquiries and discrepancies., • Conduct daily check-ins with employees to monitor attendance, performance, and engagement., • Address issues related to conduct, performance, or attendance promptly and professionally., • Maintain a strong presence on the production floor to support both employees and client supervisors., • Perform regular safety walkthroughs and report any concerns; manage injury reports and follow-up processes., • Ensure catering or shift support orders (if applicable) are accurate, timely, and aligned with client expectations., • Minimum of one year of experience in staffing or similar workforce management role required, • Bilingual (English/Spanish) required, • Highly organized and detail-oriented with strong problem-solving skills., • Excellent written and verbal communication skills., • Able to multitask and adapt in a fast-paced, high-demand environment. Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Work Location: In person Company DescriptioniStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.iStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.

Job Description Tasks/ Responsibilities including but not limited to: • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging machines., • Perform set-ups and tear downs, diagnose problems, replace or repair parts, test and make adjustments., • Perform basic preventive maintenance on machines/equipment., • Use a variety of hand and power tools and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Complete work orders and paperwork regarding daily maintenance and repair duties.

Job Description Key Responsibilities Will Include: · Create and modify 2D drawings and 3D models for components, assemblies, and systems using AutoCAD and SolidWorks. This includes preparing general arrangement, manufacturing and installation drawings. · Interpret engineering sketches, specifications, and other design inputs to develop accurate drawings and documentation. · Collaborate with engineers, designers, and production teams to ensure design accuracy and feasibility. · Maintain drawing and design documentation according to company standards. · Revise and update existing drawings reflecting design changes and improvements. · Perform tolerance analyses, material selections, and basic calculations when needed. · Assist in developing bills of materials (BOMs) and manufacturing documentation. · Ensure designs comply with applicable industry and safety standards. · Participate in design reviews and contribute to problem-solving discussions. • Internal Company communication with, project managers, engineering, purchasing and production · Coordinating all required design reviews, validations and developing test protocols. · Coordinating the performance and approval of technical bid evaluations and approval of vendor data, as required • Update project coordination software (TeamWorks), • Update project progress checklist, • Inspect first articles and finished products in production, • Performing quality control checks on items ordered and fabricated., • Work with sub-contractors to ensure design requirements are followed, • Prepare operations and maintenance manuals Skills and Experience required: • Minimum 5 years’ experience in AutoCAD/Solid Works Drafting, General Layout of equipment, and Bill of Materials, • Bachelor’s Degree in Civil or Structural Engineering, CAD or related field, • Proficient in MS Word, Excel and Outlook, • An excellent grasp of engineering and design principles and an awareness of the environmental impact of design ideas, • Ability to work independently and in a team environment, • Excellent attention to detail and organizational skills, • An appreciation for business demands and an understanding of manufacturing processes, • Excellent communication skills, both verbally and written

Job Description Position Summary: Manufactures detailed parts and tools from blueprints, sketches, drawings, or verbal instructions using various computer- or mechanically controlled machine tools and equipment. Sets up and operates mills, computer-controlled equipment (CNC) machine tools, and other machining equipment using mathematical and geometrical calculations. Uses precision measuring instruments to check and maintain tolerances. Calculates dimensions using measuring instruments. Installs, aligns, secures, and adjusts cutting tools and work pieces. Monitors the feed and speed of machines. Measures and examines completed products for defects. May also perform complex and varied machining operations in prototype experimental activities. Sets up low-complexity, unproven parts. May also set up proven parts with medium to high complexity. Essential Duties and Responsibilities include, but are not limited to: • Set up, operate, and maintain CNC milling and turning centers according to complex blueprints and specifications., • Retrieve job related information (job routings, part drawing, tool lists, work- instructions, etc.), • Select and utilize appropriate cutting tools and work holding for various materials and machining processes., • Document manufactured quantities and all required processes utilizing ERP system, • Perform precise measurements and inspections to ensure parts meet stringent quality control standards., • Participate in continuous improvement initiatives to optimize machining efficiency., • Maintain a clean and safe work environment, adhering to all safety protocols., • May assist with developing new machining methods and tooling for complex parts., • Other duties assigned. Qualifications: · Experience and Education: o 5-6 years of relevant experience o High school degree or equivalent, plus advanced training · Technical Skills: o Must have experience with 5-6 axis machines o Experience with multi-spindle machines a plus o Excellent attention to detail o Working knowledge of customer specifications and requirements o Basic computer skills o Problem solving abilities o Ability to use calipers, micrometers, etc. o Mastery of basic math (addition, subtraction, multiplication, division, and fractions) o Strong teamwork and communication skills to get along with co-workers and be a team player o Understand and obey safety requirements o Commitment to keep work area clean and free of debris · Physical Requirements: o Must be able to lift and/or move up to 50lbs o Specific vision abilities include close and distance vision, depth perception and ability to adjust focus o Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law. Company DescriptionManufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.Manufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.

Job Description A leader in Construction, is looking for self-motivated, dependable and experienced candidates to immediately fill the following full-time position. Heavy Equipment Operators needed! Looking for team members interested in joining a high impact nationwide construction company. People seeking a long-term relationship with our company as we strive to keep building a successful, enjoyable environment for all our team members! This position is responsible for operating heavy earth-moving equipment in demolition, shoring and excavation, removal and placement of earth materials and grading surfaces with detail to wet and dry underground utilities. Heavy Equipment Operator: • Must be proficient in various aspects of civil work., • Understand and have the ability to read scopes of work, plans and specifications and soils reports while applying their effects on the work being conducted., • Reviews drawings,, • Operate heavy equipment in a safe and effective manner, • Perform daily safety and maintenance checks, • Clean heavy equipment as scheduled and/or required, • Ensure heavy equipment is safely and securely stored, • Advise the project manager of any requirements for maintenance or repairs, • Participate in routine maintenance, • Practice workplace safety, • Fuel equipment as required, • Ability to read and write to record daily records, • Work outside in weather conditions including extreme cold and extreme heat, • Willing to travel frequently The Heavy Equipment Operator is responsible for operating heavy equipment in a safe and appropriate manner. Heavy equipment will include Dump trucks, backhoe, excavators, front-end loaders, compactors, skid steers and other pieces of equipment. The Heavy Equipment Operator has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. Candidates Additional Required Qualifications: • Verbal and writing skills (English language)., • 5 years minimum experience in construction and safety practices, Heavy equipment operating., • Computer experience, including the ability to e-mail reports, upload and download pictures and information., • Must have and maintain a valid driver’s license, Class A preferred. Position: Full time Location: Ontario, CA & Surrounding Area (Home office in Rancho Cucamonga, CA). Company DescriptionJones Covey Group, Inc. is a full-service fuel system contractor specializing in above and underground fuel systems for retail, commercial and government clients. JCGI is a national industry leader in fuel systems, fuel service stations, convenience stores, car washes, fuel facility service and environmental compliance nationally, providing services to Fortune 100 clients, major oil companies, distributors, fleet services, and local, state and federal agencies.Jones Covey Group, Inc. is a full-service fuel system contractor specializing in above and underground fuel systems for retail, commercial and government clients. JCGI is a national industry leader in fuel systems, fuel service stations, convenience stores, car washes, fuel facility service and environmental compliance nationally, providing services to Fortune 100 clients, major oil companies, distributors, fleet services, and local, state and federal agencies.

Job Description Position: General Counsel Salary Range: $250,000 – $300,000 base salary (plus bonus eligibility) Employment Type: Full-Time / Exempt Department: Legal Reports To: Chief Executive Officer Location: Diamond Bar, CA Business Hours: Monday–Friday, 9:00 AM – 6:00 PM Company Overview Ono Hawaiian BBQ is a fast-casual restaurant chain with over 100 locations across California and Arizona. We specialize in authentic Hawaiian plate lunches and other island-style favorites, made fresh daily with high-quality ingredients. Our mission is to bring the spirit and flavors of the islands to our customers through exceptional service and a welcoming dining experience. Position Summary The General Counsel will be a key member of the executive leadership team, responsible for all legal affairs of Ono Hawaiian BBQ. This highly strategic and hands-on role requires deep expertise in corporate law, litigation, intellectual property, real estate, labor and employment, and regulatory compliance within the quick-service restaurant or retail industry. The General Counsel will also establish and lead the company’s first in-house legal department, building the structure, processes, systems, and team necessary to support the company’s aggressive growth initiatives. This position will oversee and mentor a Real Estate Associate and may expand the legal team as business needs grow. Key Responsibilities Legal Strategy & Advice • Develop and implement legal strategies aligned with business objectives., • Maintain corporate records, manage board resolutions, and advise on shareholder matters., • Build the company’s first in-house legal department, including structure, staffing, workflows, and technology systems., • Identify staffing needs and lead recruitment of additional legal team members., • Oversee all litigation and claims, including employment (employer defense), general liability, personal injury, intellectual property, and contract disputes., • Draft, review, and negotiate commercial agreements including vendor, supplier, real estate leases, and partnership agreements., • Provide legal oversight for site acquisitions, leases, renewals, and dispositions in CA, AZ, and TX; and other real estate investments., • Advise HR and management on compliance with multi-state employment laws., • Identify legal risks, develop mitigation strategies, and protect company assets., • Provide legal training to employees and management to promote compliance and best practices. Qualifications • Juris Doctor (J.D.) degree from an accredited law school., • Active California Bar membership; ability to register as in-house counsel in Arizona and Texas., • 10–15+ years of progressive legal experience, with significant in-house experience in the QSR, retail, or hospitality industries., • Demonstrated expertise in litigation, contract law, labor and employment, corporate governance, and real estate., • Proven ability to build or lead a legal department., • Strong knowledge of regulatory and operational considerations specific to multi-state QSR or retail businesses., • Exceptional judgment, communication, negotiation, and interpersonal skills., • High degree of professionalism, integrity, and ethical conduct., • Eligible for Bonus and award programs., • 401(k) matching program to help you save for retirement., • Comprehensive medical, dental, and Vision insurance for you and your dependents., • Company Paid Life Insurance and Employee Assistance Program (E.A.P.)., • Generous PTO and Sick Time. At Ono Hawaiian BBQ, we value our employees and strive to provide a positive work environment. In addition to competitive compensation, we offer online employee discounts to amusement parks, restaurants, movie theaters, spas, sporting events, and so much more! We believe in creating opportunities for our employees to enjoy their time outside work and make lasting memories with their families and friends. Physical Demands Ono Hawaiian BBQ is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Ono Hawaiian BBQ makes hiring decisions based solely on qualifications, merit, and business needs at the time. Company DescriptionFounded in 2002, Ono Hawaiian BBQ is a fast-casual restaurant known for our authentic Hawaiian plate lunches and other island specialties. Ono Hawaiian uses the freshest ingredients, prepared from scratch daily in each restaurant and grilled fresh to order. With 100 locations in California and Arizona, we aim to combine the culture and “aloha” spirit of Hawaii into our restaurants to bring a taste of the islands with exceptional service in an inviting atmosphere.Founded in 2002, Ono Hawaiian BBQ is a fast-casual restaurant known for our authentic Hawaiian plate lunches and other island specialties. Ono Hawaiian uses the freshest ingredients, prepared from scratch daily in each restaurant and grilled fresh to order. With 100 locations in California and Arizona, we aim to combine the culture and “aloha” spirit of Hawaii into our restaurants to bring a taste of the islands with exceptional service in an inviting atmosphere.

Job Description Renogy aims to become a global leader of independent clean energy solution. We are seeking and empowering talents to build a team of world-class product innovation and development by fully leveraging clean energy ecosystem to better engage with customers to drive clean energy love and product innovation. From small power banks to complete solar kits, we pride ourselves on supplying top-of-the-line off-grid solar equipment. Position Overview: As a Product Application Engineer for Energy Storage Systems, you will play a critical role in supporting the development, application, and integration of energy storage solutions for various applications. Your responsibilities will include working closely with customers, internal teams, and partners to ensure the successful deployment and performance of energy storage products. Duties and Responsibilities: This position will be responsible for leading a variety of projects and day-to-day company operations including, but not limited to: • Collaborate with customers to understand their energy storage needs and provide technical guidance and support., • Offer expertise in selecting the appropriate energy storage solutions based on customer requirements., • Assist customers with technical issues, troubleshooting, and problem resolution., • Conduct product testing and validation to ensure optimal performance., • Conduct training sessions for customers and partners on the installation, operation, and maintenance of energy storage systems., • Product introduction and training for sales, marketing, tech support and RMA., • Create and maintain technical documentation, including application notes, user manuals, and installation guides., • Educate customers and internal teams on product features and best practices., • Work with the product development team to integrate energy storage solutions into various applications., • Define desired functionality and features for new product development., • Provide input and feedback to improve product design and performance., • Stay updated on industry regulations and standards related to energy storage and ensure products meet these requirements., • Manage and oversee energy storage system projects from inception to completion., • Bachelor's degree in Electrical Engineering, or equivalent experience in a relevant field., • Experience in product development, product management, testing or technical support in related fields is a plus., • Preferred knowledge and familiarity with the areas of Energy Storage Systems, Batteries, Inverters, battery chargers, IoT., • Self-motivated, confident, energetic, and not afraid to take risks., • Possesses strong presentation skills, both oral and written., • Demonstrated ability to work in a team environment to achieve business objectives., • Strong analytical and project management skills with an ability to develop effective solutions and manage projects through completion., • Familiarity with industry standards and regulations related to energy storage., • Will sit, stand, or walk short distances for up to the entire duration of a shift, • Will climb stairs on an occasional basis, • Will lift, push, or pull up to 40 pounds on an occasional basis, • Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis, • Must be able to comply with all safety standards and procedures, • May reach above shoulder heights and below the waist on a frequent basis, • May stoop, kneel, or bend, on an occasional basis, • Ability to wear personal protective equipment is required (including but not limited to, steel toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards) Other: • Other duties as assigned

Job DescriptionWith the Inclusive Studios of Tierra del Sol located at Upland Art Studios Positions open for Studio Practices (2D and 3D), Painting and Drawing, Printmaking, Animation, and specialization on Ceramic Studio Production. The Art Mentor is under the supervision of the Program Director, and has the primary responsibility of assisting individuals with the development of their artistic, vocational, social and community-navigation skills toward their individually chosen Art career goals/Productive and Personally Meaningful Life (PPML) Plans. The Art Mentor is expected to become familiar with all of the consumers he/she serves so that he/she can make valuable contributions to Productive and Personally Meaningful Life (PPML) Plans/Individual PATH/Rehabilitation/Habilitation/Service Plans, Person-Centered Planning meetings and Circle of Support meetings. Responsibilities include, but are not limited to: 1. Plan and conduct art instructional plans toward individual art career goals/Productive and Personally Meaningful Life (PPML) Plans., 2. Plan and conduct community events and involvement, which will assist individuals in achieving their individual Art service plan goals/Productive and Personally Meaningful Life (PPML) Plans., 3. Manage class/studio organization tasks such as attendance taking, community forms, supply orders and monitoring safety and cleanliness., 4. Supervise and direct studio assistants and volunteers in program supports and activities with individuals., 5. Provide regular feedback for studio assistants and volunteers. This position is typically scheduled 35-38 hours per week, with typical work hours of either 7:45am - 3:30pm or 9:00 a.m.– 5:00 p.m. Monday through Friday, days and times vary, depending on schedule. For this position, staff will have a 30 minute working lunch when actively supporting clients. A working lunch agreement will be on file. These hours and duties are subject to change, without notice. Qualifications: • MFA, BFA, BA degree in the field of Art preferred in this order., • Ability to effectively guide individuals in professional arts vocational training in the studio and at vocational sites., • Excellent teaching skills for 2D and 3D art production., • Effective in guiding artists in handling a variety of art materials and to master art skills and techniques., • Ability to maintain strong organization of studio area, storage of artworks, and ordering/storing supplies., • Must be able to meet all Direct Support Professional qualifications as written in DSP Universal Job Description. WHAT WE OFFER STARTING RATE OF $22.00 PER HOUR COMPETITIVE BENEFITS: • Medical, • Dental, • Vision, • Life Insurance, • 403B Savings PAID TIME OFF • Two weeks’ vacation, • Personal Tierra offers a wide variety of DSP and management-level opportunities EMPLOYEE ENGAGEMENT Tierra is committed to ensuring each and every staff member feels focused, recognized, and challenged via: • Weekly check-ins via Stand Out platform, • Monthly Department meetings, • Annual DSP Week celebration, • Annual New Year Kickoff party Bonus opportunities are available for employees who refer others to work for Tierra del Sol. INDUSTRY-SPECIFIC TRAINING/TRANSFERABLE SKILLS, INCLUDING: • First Aid/CPR Training, • NADSP E-Badge Academy: Tierra proudly offers all staff members who are interested, an opportunity to advance in their professional development and showcase their accomplishments with this accredited online training program through The National Alliance for Direct Support Professionals Foundation., • Open Future Learning: Accredited online training recognized by The National Alliance for Direct Support Professionals., • Handle with Care Behavior Management System: This federally approved two-part training system provides staff with verbal-intervention and physical-intervention techniques that focus on empowering individuals experiencing a crisis to regain control through support from trained personnel.

Job Description We are seeking a skilled and detail-oriented Moldmaker to join our dynamic team. The ideal candidate will possess a strong background in mold design and fabrication, with hands-on experience in various machining processes. As a Moldmaker, you will be responsible for creating high-quality molds that meet precise specifications and contribute to the production of our products. This role requires a commitment to safety, quality, and efficiency in a fast-paced manufacturing environment. Responsibilities • Utilize hand tools and machining equipment such as lathes, stamping presses, and electrical discharge machining to produce mold components., • Measure and inspect mold parts using precision instruments like micrometers to ensure accuracy., • Assemble molds according to specifications, ensuring proper fit and function., • Perform welding tasks as needed for mold assembly and repair., • Troubleshoot and resolve issues related to mold production and functionality., • Proven experience as a Moldmaker or in a similar role within the manufacturing industry., • Proficiency in CAD software for mold design., • Strong understanding of mold assembly techniques and the use of hand tools., • Experience with micrometers and other precision measuring instruments is essential., • Ability to work independently as well as part of a team in a fast-paced environment.

Job DescriptionDelivery Driver- job postFedEx GroundChino Hills, CA 91709$19.50 - $26 plus an hour - Full-time or Part-time Job details Salary$19.50 - $26 plus an hour (up to $300 per day)Pay TypesPaid weeklyJob TypeFull-timePart-time Qualifications • English (Required), • Driver's License (Required), • US work authorization (Required), • High school or equivalent (Preferred) Full Job Description FedEx Ground Pick Up and Delivery Driver for Routes in Chino, CA D5 Logistics, Inc. is hiring Delivery Drivers for the Chino Terminal D5 Logistics, Inc. is a package & delivery- FedEx Ground Independent Service Provider (ISP), operating out of Chino servicing Chino Hills. We are looking to hire friendly, honest, enthusiastic, hardworking, safety-minded, dependable drivers! No Experience needed, we provide the training, vehicle and all the tools you need to become a successful delivery driver. IMMEDIATE OPENINGS AVAILABLE, FLEXIBLE STARTING DATES! Duties and Responsibilities • This Position is working for independent contractor who contracts with FedEx Ground out of the Chino, Ca terminal· Must maintain a professional appearance and demeanor.· Perform pre-trip and post-trip inspection of delivery vehicle daily, • Organize preloaded products in step vans, box trucks, and or transits vehicles according to company’s specifications· Attend team meetings· Complete continuing Safety trainings, • Safely drive and operate your delivery vehicle, • Use a handheld device for routing information and customer delivery information, • Delivery and pick up packages to and from customers on assigned routes, • Navigate a variety of routes throughout the delivery area, • Maintain ongoing communication with management team· Maintain clean vehicle and tools· Help neighboring routes when needed, • Perform the following tasks, with or without reasonable accommodation, • Lift packages up to 75lbs unassisted and up to 150lbs with dolly, • Get in and out of the delivery vehicles and walk up and down stairs throughout your shift, • Basic Requirements, • Trainee drivers willing to work hard and learn fast or pre-approved individuals eligible to drive for FedEx or experienced drivers., • Drivers will deliver 100-250 stops per day so good physical fitness is ESSENTIAL., • Must be eligible to work in the US, • Must be at least 21 years of age, • Must have conversational English, • Must be punctual, energetic, reliable, and honest, • Must have a valid regular Class -C California Driver’s License. CDL is not required., • Must be able to pass DOT Physical· Must have a clean driving record (No DUI, No Suspensions, No cell phone violations, and no moving violations in the past 3 years). · Must be able to pass a detailed background check (No misdemeanor, No felonies)., • Must be able to pass a pre-employment drug test administered by a third party-Medical Review Personal (5-panel test including Marijuana (THC), Opioids, Phencyclidine (PCR), Cocaine, and Amphetamines). That includes ABSOLUTELY no marijuana in the last 45 days.Preferred Qualifications, • Focus on safety, customer service, and continuous improvement, • Flexible Schedules, • Accountable, Self-motivated and energetic, • Reliable and hardworking ethic, • Possess a positive and professional attitude, • Growth Mindset that believes anything is possible if you put your mind to it and work hard to achieve it.Compensation & Benefits-, • Hourly pay with progressive stop bonus that allows drivers to make an average rate of $19.50 to $26.00 per hour plus (based on performance) and up to $300 per day., • Paid training, • Paid overtime, • Weekly pay every FridaySchedule:, • Drivers will work 4-6 days per week at 8–11 hour shifts., • Weekend availability, • Year-round work, • Part-time opportunities availableAdditional Benefits, • 2 weeks paid time off per year, • 401(k) with employer match, • Flexible schedule, • Paid training, • Become part of a great team, • Career advancement opportunitiesAbout D5 Logistics, Inc. D5 Logistics, Inc. is a FedEx Ground Independent Service Provider (ISP) operating out of the Chino, CA terminal servicing Chino Hills, a beautiful community in the southwestern corner of San Bernardino County, adjacent to Orange County to the south. We are committed to teamwork, employee growth, and rewarding excellence. Our priority is the safety of our team and the community we serve while providing reliable and efficient pick up & delivery service to our FedEx Ground customers. D5 Logistics, Inc. is always on the lookout for motivated, hardworking, individuals to join our team! Whether you are looking for long-term career opportunities, or short-term financial stability if you are committed to excellence and care about people then we want you. We are looking for full time, part time, and seasonal team members. D5 Logistics, Inc. is an Equal Opportunity Employers. Candidates who wish to become part of the team, please apply here.

Job Description Junk King Seeking Operator/Driver (Los Angeles) Applicants Must: Labor Have strong customer service/people skills Sense of duty and responsibility Should be able to lift 75 lbs; labor intensive Valid driver license with a clean record (driver must be 25 years of age or older; due to insurance reasons); (operators do not need to be) Be comfortable working in a fast-paced environment; labor This job includes: Sales: Onsite selling, up-selling, customer service; labor involved Truck Operations: Safety, courteous and aware Junk Removal: HEAVY LIFTING and removal of junk from business, residential and government sites, labor instensive Marketing: Delivery of marketing materials to targeted focus areas Guerilla Marketing: Participation in unique marketing activities Brand Building: Working to build and maintain the Junk King brand image This is a great opportunity to come aboard with one of the leaders in the industry. Great perks and opportunity for growth is available to those willing to go the extra mile! Starting salary $19- $20 an hour If interested, please call (909) 964-8353

Job Description Position Summary: Manufactures detailed parts and tools from blueprints, sketches, drawings, or verbal instructions using various computer- or mechanically controlled machine tools and equipment. Sets up and operates mills, computer-controlled equipment (CNC) machine tools, and other machining equipment using mathematical and geometrical calculations. Uses precision measuring instruments to check and maintain tolerances. Calculates dimensions using measuring instruments. Installs, aligns, secures, and adjusts cutting tools and work pieces. Monitors the feed and speed of machines. Measures and examines completed products for defects. May also perform complex and varied machining operations in prototype experimental activities. Sets up low-complexity, unproven parts. May also set up proven parts with medium to high complexity. Essential Duties and Responsibilities include, but are not limited to: • Set up, operate, and maintain CNC milling and turning centers according to complex blueprints and specifications., • Retrieve job related information (job routings, part drawing, tool lists, work- instructions, etc.), • Select and utilize appropriate cutting tools and work holding for various materials and machining processes., • Document manufactured quantities and all required processes utilizing ERP system, • Perform precise measurements and inspections to ensure parts meet stringent quality control standards., • Participate in continuous improvement initiatives to optimize machining efficiency., • Maintain a clean and safe work environment, adhering to all safety protocols., • May assist with developing new machining methods and tooling for complex parts., • Other duties assigned. Qualifications: Experience and Education: 5-6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Must have experience with 5-6 axis machines Experience with multi-spindle machines a plus Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary: Under general supervision and according to established policies and procedures, the MRI Technologist will perform all required diagnostic scanning procedures to produce consistent, high-quality examinations. Essential Functions of an MRI Technologist: • Performs all required diagnostic MRI exams in a timely manner., • Positions patients for exams, ensuring comfortable and accurate positioning., • Monitors the condition of patients in the department and assists the radiologist or other physicians in performing needed medical attention., • Interprets physician instructions and select software options and imaging parameters when adjusting an MRI machine, • Assures all exams include accurate clinical and demographic information and high quality, complete images, • Screens patients for any precautions or contraindications prior to them entering the magnetic field and thoroughly research all implants, devices, etc., • Possesses a skilled level and working knowledge of MRI scanning technology., • Communicates with radiologists and other healthcare providers about images and patient care., • Initiative to obtain additional scans, views, or extremely technical factors to provide maximum information for the radiologist to make an accurate diagnosis., • Maintain sensitivity to physical and psychological needs of patients, • ARRT/ ARMRIT Certification, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • PTO for full-time employees, • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances, • 401(k) Retirement Plan, • Employee Assistance Program, • PRN, • Onsite At Rezolut, compensation offers are determined based on the specific circumstances of each role and candidate. While it is not typical for an individual to be hired at the high end of the range for their role, the offer extended to the successful candidate will be influenced by a variety of factors including job-related knowledge/skills, experience, geographical location, and internal equity. We are committed to pay transparency and adhere to all applicable federal, state, and local pay disclosure laws.