Trabajos shields en Los Angeles, CaliforniaCrear alertas

Job DescriptionDescription: Job Summary: • Completes power washing services on scheduled cycles and/or on-demand work orders as assigned. This position requires operators to safely drive large F-550 diesel or gas powered (or comparable) vehicles with a mounted pressure washing unit, hose reels, 500+ gallon primary water tank, recovery vacuum, and 125-gallon wastewater recovery tank., • Operators are responsible for pressure washing various outdoor surfaces including bus stops, sidewalks, bus shelters, benches, trash receptacles, concrete walls and other vertical and horizontal structures. The position requires working in and around crowded areas in a safe and effective way with the ability to identify and correct conditions that might affect public and employee safety., • Be able to complete assigned work orders daily, monitor operational status of the pressure wash unit, perform minor maintenance such as checking oil, other fuel levels, check hoses and connectors prior to each use., • Follow the safety training procedures and instructions provided by the company, wear safety googles, face-shields, rubber-soled boots and other personal protective equipment (PPE) while performing pressure washing., • The operator will handle and operator pressure washing machines with high-pressure (3500-4000 psi) and extremely hot water and/or steam. The safe operation of this equipment is imperative to the safety of the public and the operator., • This position may require cross training in other areas of the business to broaden the employee’s skill set beyond the job description and duties listed for this Pressure Wash/Powerwash Operator position. Requirements: Qualifications: • Must have a basic level of English comprehension, reading, speaking, and writing., • Equipment Type: F-550 diesel or gas powered (or comparable 15,000+ GWVR) vehicles with a mounted pressure washing unit, hose reels, 500+ gallon primary water tank, vacuum, and 125-gallon wastewater recovery tank., • High School Diploma or Equivalency preferred. Pressure washing experience desired but not required., • We will provide training for qualified individuals. Physical Demands: Physical demands require frequent and prolonged use of hands and arms to use pressure wash gun/wand, bending, standing, and lifting 20-50 lbs. frequently throughout a normal shift. The employee must be able to work and walk around on smooth, uneven, cracked, slippery and slick surfaces (sidewalks, parking lots, walkways, etc.). Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moderate to extreme weather (very cold and wet to very hot conditions), bicyclists and pedestrians, vehicle and bus traffic. Due to the nature of this work (pressure washing), the employee is exposed to high-pressure, hot and cold water and steam from ground-level and overhead. The employee is frequently exposed to pressure wash machine and street noise and occasionally is exposed to loud noise. These conditions can be mitigated with hearing protection equipment.

Job Description We are seeking a Plating Operator to join our Brea facility. This role is responsible for operating and maintaining plating and wet process equipment used in the production of high-reliability printed circuit boards. The Plating Operator ensures all products are processed accurately, safely, and in compliance with customer specifications and environmental standards. Duties & Responsibilities • Execute plating and chemical process operations, including copper plating, acid/tin plating, electroless copper, nickel, soft gold, hard gold, and related cleaning and stripping processes, • Perform resist strip, copper etch, solder strip, and associated wet process operations according to established procedures, • Conduct routine preventative maintenance on chemical baths and plating equipment to maintain stable operating conditions, • Inspect products and process stages to verify compliance with specifications and identify potential quality issues, • Follow travelers, work instructions, and order-specific requirements with accuracy and attention to detail, • Maintain compliance with local, state, and federal regulations related to chemical handling, safety, and waste management, • Coordinate with Waste Treatment personnel to ensure proper handling and disposal of spent chemicals, • Adhere to all company safety policies, PPE requirements, and chemical handling procedures, • Collaborate with Production and Engineering teams to support workflow, quality initiatives, and process improvement activities, • Perform additional duties as assigned to support department operationsQualifications, • High school diploma or equivalent preferred, • 2–6 years of plating or wet process experience in PCB manufacturing or a similar electronics production environment preferred, • Ability to read and follow technical work instructions and production documentation, • Comfortable wearing full PPE, including gloves, safety glasses, face shields, aprons, and chemical-resistant footwear, • Comfortable working around chemical processes in a controlled manufacturing environment, • Basic computer skills for tracking and logging production data, • Strong attention to detail and commitment to quality standards, • Effective verbal and written communication skills, • Ability to work independently and as part of a team in a fast-paced production environmentPhysical Requirements, • Ability to lift up to 25 pounds without strain, • Ability to stand throughout the entire shift Hourly Pay: $20 - $28 per hour Compensation is based on relevant experience, education, certifications, and specialized skills. Winonics is an ITAR-compliant facility, and all employees must meet ITAR eligibility requirements. Winonics is an Equal Opportunity Employer and complies with all federal, state, and local employment laws. All employment offers at Winonics are contingent upon the successful completion of a background check and pre-employment drug screening. Winonics is a drug-free workplace and complies with all applicable federal, state, and local laws regarding background investigations and substance testing.

Fusion Medical Staffing-Cath Lab is seeking a travel Cath Lab Technologist for a travel job in Los Angeles, California. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 07/13/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Travel Cath Lab Tech Company: Fusion Medical Staffing Location: Facility in Los Angeles, California Job Details Fusion Medical Staffing is seeking a skilled Cath Lab Tech for a 13-week travel assignment in Los Angeles, California. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year’s recent experience as a Cardiac Cath Lab Tech, • Current BLS (AHA/ARC) certification, • ARRT, RCES, or RCIS certification, • Current ACLS (AHA/ARC) certificationPreferred Qualifications:, • Valid Radiologic Technologist license in compliance within state regulations, • PALS (AHA/ARC) or ENPC Certifications, • Other certifications and licenses may be required for this positionSummary: The Cath Lab Technologist is responsible for assisting in diagnostic and interventional cardiovascular procedures in the cardiac catheterization lab. This role involves preparing patients and equipment, monitoring hemodynamic data, assisting physicians during procedures, and ensuring patient safety throughout the process. The technologist operates specialized imaging equipment, maintains sterile technique, and collaborates with the healthcare team to provide high-quality patient care. This position requires technical expertise in cardiovascular procedures, critical thinking skills, and the ability to work efficiently in high-pressure situations. Essential Work Functions: • Prepare and position patients for cardiac catheterization, angioplasty, stent placement, electrophysiology studies, and other interventional procedures, • Assist physicians during procedures by passing catheters, wires, balloons, and stents, and operating fluoroscopy and hemodynamic monitoring equipment, • Operate and maintain imaging equipment, contrast injectors, and hemodynamic monitoring systems, ensuring proper functionality, • Scrub in and assist with sterile field setup, ensuring adherence to infection control and procedural protocols, • Perform sheath removal and hemostasis using manual compression or closure devices as directed, • Maintain accurate documentation, including patient records, imaging data, and equipment logs, • Assist with inventory management, stocking supplies, and ensuring proper storage of sterile instruments and medications, • Adhere to radiation safety protocols, ensuring proper use of lead aprons, shields, and dosimeters, • Ensure compliance with hospital policies, safety guidelines, and regulatory requirements, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards, • Perform other duties as assigned within the scope of practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Cath Lab Job ID #1935693. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Cath Lab With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. Benefits • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education

Job Description $19.75 - $21.95 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. Reporting to the Operations Manager/Transportation Managers with a dotted line to the Transportation Manager, the Mover Technician physically lifts, carries and/or pushes furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. May assist in loading and offloading trucks from docks and/or on a lift-gate and setting & offsetting goods on equipment. Responsible to produce a quality move for the customer. Also physically and professionally disconnects and reconnects workstation PCs, peripherals, server components and related hardware, and/or provide daily help-desk solutions at an ROI account or projects as assigned. Assists the move process by communicating with supervisors, the end users/customer and other crew members. Uses extreme care not to damage goods or facilities during the move. This position is also responsible for reporting and escalating any related issues about the job to the Operations Manager/Transportation Managers. Typically reports to the Operations Manager/Transportation Managers, but has a dotted line to the Driver, Lead Foreman, Driver Foreman, Supervisor, Project Manager, Dispatcher, and Operations Supervisor. The Mover Technician is scheduled to work at different customer account locations to provide technical support for commercial moving, disconnect and reconnect projects. This position is responsible to ensure the customer’s requests relating to IT Technical support are performed efficiently and in a timely manner. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: · Checks for start time (for next day’s work schedule) with dispatch daily. · Arrives at Corovan dispatch office (or on-site), in complete uniform every day. · Obtains daily work assignments from dispatch or operations manager. · Pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required. · Assists Drivers loading and unloading trucks using a ramp, dock, or lift-gate. · Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved and supervises others doing the same. Completes all paperwork accurately and neatly and turns into operations daily. · Handles and stages product, performs detail work and trash-out functions on install projects. Technical Duties: · Disconnects and reconnects PCs and other peripheral electronic desktop components per supervisor’s direction. · Records basic system information on PC Disconnect/Reconnect Checklist such as serial numbers, manufacturer, model numbers and placement. · Ability to properly install basic customer requested software, application, and system. · Ability to assist in the support of the customer’s server room or lab room if assigned. Ability to correctly label, disconnect and reconnect components of a server rack. • Capture the existing workstation layout at the customer site and ensure the new setup is placed the same., • Labeling all the IT assets/inventories to ensure there is no missing items during the moving., • Ability to manage different cables and wires to ensure a nice, neat, and safe workstation., • Ability to perform network connectivity testing., • Knowledge of network cable tracing and connect and reconnect IT inventories., • Ability to effectively utilize CoroTrac software on portable electronic devices, take photographs, place labels, relocate and place items correctly at destination., • Ability to strongly perform the Technical I level key responsibilities. Customer Relations: · Maintain excellent customer service with the customers, transportation, and operation teams to establish solid relationships. · Must be punctual at all times. If an emergency arises, inform the supervisor and warehouse manager immediately, so that appropriate coverage can be arranged. · Must work cooperatively with all members of the crew. · Must be courteous, helpful, and professional to all existing and potential customers. · Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations. · Must follow all confidentiality rules regarding any products or services that are visible at a customer’s site. · Must follow all security rules for the company and assigned customers. Safety: · Performs work with quality, efficiency, and safety at all times. · Must abide by all safety rules; to include proper safety gear and PPE (back braces, hard-hats, safety shoes, etc., if required by the customer), drive forklifts safely (seatbelt, slow speeds, ensuring trucks are chalked and using proper plates, etc.). · Report any unsafe dangerous requests from customers to senior management. Other Duties: · Ensure timesheets and other documentation is completed accurately and turned in by the time requirement. · If also a qualified installer, installs systems walls and splines, handles and stages product, performs detail work and trash-out functions on install projects. · If also a qualified and approved driver, drives trucks up to and including Class A vehicles and or operates forklifts. All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: 1. ORGANIZATION SKILLS - Organization and project planning skills with ability to juggle multiple assignments and tasks., 2. LANGUAGE SKILLS - Ability to read and interpret documents written in English such as procedures, work instructions, and timesheets. Ability to effectively communicate with customers and coworkers., 3. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., 4. REASONING ABILITY - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., 5. OTHER DUTIES: a. Problem solving and strong decision-making skills b. Must be familiar with and able to train others using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, J bars, etc., etc. c. Must be familiar with basic systems furniture nomenclature and be able to identify upon sight, the major lines of the three major manufactures: Steelcase, Herman Miller, and Haworth. d. Must be familiar with project management reports such as Gantt and Pert charts and understand and interpret cut sheets. e. Must be able to produce detailed inventories of all goods exposed to on O&I and install projects. f. Must be able to accurately estimate small move and install projects to determine manpower, trucks, and equipment necessary to complete the tasks required. g. Must be able to produce red-line and stick drawings. Has an understanding of space planning fundamentals and building Code. h. Must be able to conduct a customer pre-move meeting, post destination signage and communicate all standard move and install protocol to the customers. i. Must be familiar with laboratory moving including packing of lab equipment, fine tune and detail work, PC disconnect and reconnect and must possess good customer service skills. j. Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage. k. Must complete Mover I Level Corovan University training and pass the written tests. May also be required to pass Mover II, Installer I, II, and III, or be a qualified and approved Driver I or II. EDUCATION and/or EXPERIENCE: 1. High School Diploma and/or general education degree (GED); or one to two (1-2) year’s related experience and/or training or equivalent combination of education and experience., 2. Experience in handling computer equipment and other fragile devices with exceptional attention to detail., 3. Good understanding about computer hardware, cables, and connections., 4. If also a driver, a valid California driver’s license is required., 5. Valid driving record that meets the company’s insurance carrier’s requirements., 6. One (1) year of warehouse/moving or technician experience preferred, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, and J bars. PRIMARY LOCATION: Orange County. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. 1. Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., 2. Handling: Seizes, helps, or works with hands., 3. Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. May also include climbing or descending stairs while carrying goods up to 50 pounds., 4. Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., 5. Standing: Remains in standing position if required to perform various functions of the job., 6. Stooping: Bends body downward and forward by bending at knees or waist., 7. Vision: Reads paperwork and records on the computer., 8. Talking: Communications by phone, email, text and in person., 9. Sitting: Sits at desk. Sits for long periods of time. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields and/or hearing protection. This list is not all inclusive. 1. Temp/Weather: Works in either 1) Office environment - for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold temperature, and 3) Outside - may be exposed to wet and/or humid conditions, outside weather conditions and extreme cold., 2. Noise: Works in office, warehouse, or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: 1. Variable hours, non-exempt, part time regular position., 2. Employees might be required to work late evenings or weekends depending on the business needs., 3. All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #ZR

Job Description Job Summary We are seeking a dependable Shipping/Receiving professional for a contract/temporary opportunity in Duarte, CA within a biotechnology/pharmaceutical production environment. This role supports the safe, accurate, and timely handling of donated milk products, including receiving, documentation, freezer storage, and transfer between designated production and storage areas. This is a great opportunity for someone with 1 to 2 years of shipping, receiving, warehouse, production, or regulated environment experience who enjoys hands-on work, detailed processes, and contributing to an important operation. The work environment is structured, safety-focused, and team-oriented, with clear procedures, provided PPE, and support from experienced leadership. Candidates who are organized, reliable, and comfortable standing for most of the shift can succeed in this role. Key Responsibilities • Perform and verify check-in of donated milk products according to established procedures., • Enter receiving, inventory, and processing information accurately into internal computer systems., • Organize received raw milk products in designated freezer storage areas., • Transfer frozen and sampled raw milk between the sampling cleanroom and freezer storage area in a timely manner., • Transfer raw milk into containers, apply labels, and bag products for freezer storage., • Maintain a clean and safe working area using required PPE and approved disinfectants. Compensation and Benefits • Pay rate: $22.21 per hour., • Job type: Contract/Temporary., • Location: Duarte, CA., • PPE provided may include safety shoes, over boots or captive boots, safety glasses, goggles, face shields, cut-resistant and chemical-resistant gloves, poly sleeves, aprons, freezer jacket, and overalls. Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: https://www.eeoc.gov/sites/default/files/2023-06/22-088EEOCKnowYourRights6.12.pdf The pay transparency policy is available here: https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp%20EnglishformattedESQA508c.pdf For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. https://e-verify.uscis.gov/web/media/resourcesContents/E-VerifyParticipationPoster_ES.pdf We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #1002 Company DescriptionThis company offers growth and a great group of people to work with.This company offers growth and a great group of people to work with.

Job Description $18 - $20.03 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. SUMMARY: Reporting to the Operations Manager/Transportation Manager, the Mover I physically lifts, carries and/or pushes furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. May assist in loading and offloading trucks from docks and/or on a lift-gate and setting & offsetting goods on equipment. Responsible to produce a quality move for the customer. Assists the move process by communicating with Driver, Lead Foreman, Driver Foreman, Supervisors or Project Managers, the end users/customer, and other crewmembers. Uses extreme care not to damage goods or facilities during the move. This position is also responsible for reporting and escalating any related issues about the job to the Driver, Lead Foreman, Driver Foreman, Supervisor or Project Manager. Typically obtains daily site work role assignments from the Driver, Lead Foreman, Driver Foreman, Supervisor, or Project Manager, however, has a dotted line to the Dispatcher, Operations Supervisor and directly reports to the Operations Manager/Transportation Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: · Checks for start time (for next day’s work schedule) with dispatch daily. · Arrives at Corovan dispatch office (or on-site), in complete uniform every day. · Obtains daily work assignments from dispatch or operations manager. · Pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required on various floors and sometimes up and down stairs. · Assists Drivers loading and unloading trucks using a ramp, dock, or lift-gate. · Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved. · Handles and stages product, performs detail work and trash-out functions on install projects. Customer Relations: · Maintain excellent customer service with the customers, transportation, and operation teams to establish solid relationships. · Must be punctual at all times. If an emergency arises, inform the Operations Supervisor or Operation Manager immediately, so that appropriate coverage can be arranged. · Must work cooperatively with members of the crew. · Must be courteous, helpful, and professional to all existing and potential customers. · Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations. · Must follow all confidentiality rules regarding any processes, products or services that are visible at a customer’s move site. · Must follow all security rules for the company and assigned customers. Safety: · Performs work with quality, efficiency, and safety at all times. · Must abide by all safety rules; to include proper safety gear (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law), drive forklifts safely (seatbelt, slow speeds, ensuring trucks are chalked and using proper plates, etc.). · Report any unsafe dangerous requests from customers to senior management. Other duties: · Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement. · All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: 1. ORGANIZATION SKILLS - Organization and project planning skills with ability to juggle multiple assignments and tasks., 2. LANGUAGE SKILLS - Ability to read and interpret documents written in English such as procedures, work instructions, and timesheets. Ability to effectively communicate with customers and coworkers., 3. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., 4. REASONING ABILITY - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., 5. OTHER DUTIES: a. Problem solving and strong decision-making skills b. Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage. c. Must complete Mover I Level Corovan University training and pass the written tests. EDUCATION and/or EXPERIENCE: 1. High School Diploma and/or general education degree (GED); or one to two (1-2) year’s related experience and/or training or equivalent combination of education and experience., 2. One (1) year of warehouse/moving experience preferred, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, and J bars. PRIMARY LOCATION: Orange County, & Los Angeles. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. 1. Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., 2. Handling: Seizes, helps, or works with hands., 3. Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., 4. Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., 5. Standing: Remains in standing position if required to perform various functions of the job., 6. Stooping: Bends body downward and forward by bending at knees or waist., 7. Vision: Reads paperwork and records on the computer., 8. Talking: Communications by phone, email, text and in person., 9. Sitting: May be required to sit at desk. May sit for long periods of time., 10. Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., 11. Heights: May include working at height on a loading dock up, or on a lift-gate. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. 1. Temp/Weather: Works in either 1) Office environment - for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside - may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., 2. Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: 1. Variable hours, non-exempt, regular position., 2. Employees might be required to work late evenings or weekends depending on the business needs., 3. All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description $18 - $20.03 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. SUMMARY: Reporting to the Operations Manager/Transportation Manager, the Mover I physically lifts, carries and/or pushes furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. May assist in loading and offloading trucks from docks and/or on a lift-gate and setting & offsetting goods on equipment. Responsible to produce a quality move for the customer. Assists the move process by communicating with Driver, Lead Foreman, Driver Foreman, Supervisors or Project Managers, the end users/customer, and other crewmembers. Uses extreme care not to damage goods or facilities during the move. This position is also responsible for reporting and escalating any related issues about the job to the Driver, Lead Foreman, Driver Foreman, Supervisor or Project Manager. Typically obtains daily site work role assignments from the Driver, Lead Foreman, Driver Foreman, Supervisor, or Project Manager, however, has a dotted line to the Dispatcher, Operations Supervisor and directly reports to the Operations Manager/Transportation Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: · Checks for start time (for next day’s work schedule) with dispatch daily. · Arrives at Corovan dispatch office (or on-site), in complete uniform every day. · Obtains daily work assignments from dispatch or operations manager. · Pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required on various floors and sometimes up and down stairs. · Assists Drivers loading and unloading trucks using a ramp, dock, or lift-gate. · Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved. · Handles and stages product, performs detail work and trash-out functions on install projects. Customer Relations: · Maintain excellent customer service with the customers, transportation, and operation teams to establish solid relationships. · Must be punctual at all times. If an emergency arises, inform the Operations Supervisor or Operation Manager immediately, so that appropriate coverage can be arranged. · Must work cooperatively with members of the crew. · Must be courteous, helpful, and professional to all existing and potential customers. · Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations. · Must follow all confidentiality rules regarding any processes, products or services that are visible at a customer’s move site. · Must follow all security rules for the company and assigned customers. Safety: · Performs work with quality, efficiency, and safety at all times. · Must abide by all safety rules; to include proper safety gear (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law), drive forklifts safely (seatbelt, slow speeds, ensuring trucks are chalked and using proper plates, etc.). · Report any unsafe dangerous requests from customers to senior management. Other duties: · Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement. · All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: 1. ORGANIZATION SKILLS - Organization and project planning skills with ability to juggle multiple assignments and tasks., 2. LANGUAGE SKILLS - Ability to read and interpret documents written in English such as procedures, work instructions, and timesheets. Ability to effectively communicate with customers and coworkers., 3. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., 4. REASONING ABILITY - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., 5. OTHER DUTIES: a. Problem solving and strong decision-making skills b. Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage. c. Must complete Mover I Level Corovan University training and pass the written tests. EDUCATION and/or EXPERIENCE: 1. High School Diploma and/or general education degree (GED); or one to two (1-2) year’s related experience and/or training or equivalent combination of education and experience., 2. One (1) year of warehouse/moving experience preferred, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, and J bars. PRIMARY LOCATION: Orange County, & Los Angeles. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. 1. Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., 2. Handling: Seizes, helps, or works with hands., 3. Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., 4. Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., 5. Standing: Remains in standing position if required to perform various functions of the job., 6. Stooping: Bends body downward and forward by bending at knees or waist., 7. Vision: Reads paperwork and records on the computer., 8. Talking: Communications by phone, email, text and in person., 9. Sitting: May be required to sit at desk. May sit for long periods of time., 10. Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., 11. Heights: May include working at height on a loading dock up, or on a lift-gate. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. 1. Temp/Weather: Works in either 1) Office environment - for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside - may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., 2. Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: 1. Variable hours, non-exempt, regular position., 2. Employees might be required to work late evenings or weekends depending on the business needs., 3. All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Title: Back Floor Supervisor Position Summary The Back Floor Supervisor performs a variety of dental assisting duties while promoting a safe and cleanly environment for providing quality dental care. These duties include, but are not limited to, supervising all Non-professional Dental back office employees; assisting the doctors; communicating effectively with patients (or parents if patient is a child); maintaining equipment and inventory; and following standard precautions, OSHA and HIPAA requirements, and dental board auxiliaries’ regulations. Responsibilities • Open/close the back office as instructed, • Ensure dental office is a safe environment, • Supervise the Registered Dental Assistants, Dental Assistants, and Sterilization Assistants, • Assist the Office Manager in implementing the Code of Safe Practices and monitoring OSHA and HIPAA compliance, • Supervise orientation and training of all new assistants by introducing them to the office, systems, and set‑ups, • Monitor and coordinate patient flow between x-ray department, new patients, recall patients, post‑operative check‑ups, specialty patients, hygiene patients, etc.—to increase production, • Keep dentists up to date on awaiting patients, • Monitor supply utilization to optimize use and minimize cost, • Order supplies (including oxygen), check all invoices, and return them to Office Manager on a daily basis. Assure that supplies are not under-stocked or over-stocked, inventory control, • Maintain the prosthetic laboratory schedule, • Monitor quality control of re-do cases, • Review charts on daily basis to determine if everything has been documented and if the patient had all work done for which she/he was scheduled, • Ensure that impressions are poured properly, without flaws, and are not left out overnight to dry, • Record, in a log book, the date prosthetic cases are sent out, and when they are due back, • Pack lab cases and send them out the same day, • Check lab cases daily; ensure that patients are rescheduled when cases were expected but not received, • Monitor the lunch schedules and breaks of back office staff; and ensure that all posts are covered at all times, • Coordinate equipment repairs with Office Manager, • Supervise the oiling of handpieces, • Ensure that amalgamator is cleaned on a weekly basis, • Obtain post‑operative Endo x-rays for dentists prior to dismissing patients, • Complete and send in spore tests weekly and ensure the tests pass satisfactorily, • Check with dentists to ensure the day is running smoothly, • Perform OSHA training for all new employees., • Coordinate OSHA meeting once a month; have employees sign the training log in the Hazard Communication book as needed, • Check continuously to ensure that sterilization is being done properly and that all staff know and understand sterilization procedures, • Coordinate scheduling with office manager for back office staff, • Report patient and staff problems to the office manager, • Coordinate with Office Manager to issue warnings for violations of OSHA and HIPAA regulations and Company policy, • Monitor the staff to ensure everyone is performing only functions for which they are licensed, • Handle complaints from the back office staff and patients, communicate with office manager as needed, • Be available for filling in for back office positions when the back is short of staff, • Check to make sure rooms, equipment (including chair base), all clinical areas, etc. are cleaned daily, • Review back office employees’ licenses and ensure the licenses are current and properly posted, • Walk around and listen to make sure patients are being treated nicely by the back office staff and dentists, • Call hazardous waste disposal company for pick up when the fixer and developer drum are full and to pick up sharps container if it gets full before the scheduled pick-up date, • Assist with x‑rays when necessary, • Ask all patients the following questions prior to taking x-rays:, • When was your last dental visit?, • When was the last time you had x‑rays taken of your mouth?, • Where were your last x-rays taken?, • Why did you decide to come into the office for an appointment today? What seems to be your biggest complaint?, • Ask all female patients the following question: Is there any possibility that you may be pregnant? (If yes, consult with the Doctor. Possible follow‑up may involve placing a double lead apron as a shield.), • Accurately and completely document patient care activities in the chart as directed by the doctor and Company policy, • Prepare the patient by placing the shield over her/him, • Call the dentist in for proper visual examination and x-ray prescription, • Take x-rays as prescribed by the doctor, • Develop, mount, and file x-rays, • Check each print and make sure the desired quality was achieved—this is necessary to ensure a satisfactory diagnosis, • Ensure necessary x‑rays and patient information are in the chart. X‑rays must be mounted and approved by the doctor. Make sure all necessary x‑rays are available for pre-authorization., • Seat patients in an operatory or back in the waiting room upon completion of x-rays (check the operatory to make sure it is clean and disinfected before seating a patient), • Inform the doctor when there is a patient waiting in an operatory, • Duplicate x-rays upon request, • Be professional and courteous to the patients at ALL times, have a positive attitude and be motivated to work., • Maintain back office counter throughout the day; ensure it is neat and clean, • Prepare operatories for various procedures, • Prepare trays for various procedures, • Ensure that operatories are stocked and cleaned at all times, • Check for patients’ signatures on the Health Questionnaire and Informed Consent Form, • Assist the dentists during various procedures and rotate with dentists as requested, • Pour models for labs, • Explain treatment plans to patients as needed, • Escort patients to front office area for patient dismissal when treatment is completed, and inform the receptionist when and for what their next visit must be scheduled, • Assist with busing, disinfecting operatories and general back office areas, and applying all-wrap in and around operatories where needed, • Clean, sterilize, and package dental instruments, • Prepare lab cases, • Clean and maintain all equipment in accordance with the maintenance guidelines, • Turn off all equipment nightly, including the vacuum, compressor, etc., • Clean back office restroom throughout the day, • Ensure that hazardous products are properly labeled, • Wear protective barriers (face shield mask, gloves, and gown), • Ensure proper sterilization and infection control guidelines are utilized, • Comply with rules and regulations of all agencies and regulatory bodies, • Comply with safety regulations and universal precaution practices, • Comply with Dental Auxiliaries’ Regulations from Dental Board, • Comply with all Safety, Emergency, Hazard, OSHA, HIPAA, Sterilization, Clinical, Quality Assurance and Administrative Plans, Policies, Guidelines, Protocol, and Standards, • Assist in the scheduling of appointments; reminder appointments to patients; and reschedule appointments, if requested, • Assist with patient registration, if requested, • Data entry and back up receptionist duties as needed, • Assist Office Manager, as needed, with general clerical and back office duties, • Attend and participate in staff meetings and team huddles, • Participate on committees and special projects as requested, • Other duties as assigned by the Office Manager, Regional Manager, and/or Dentists, • Ensure all equipment is maintained, • Communicate all necessary repairs immediately Knowledge, Skills, and Abilities • Valid RDA Certification/License, • Valid CPR and First-Aid certification, • Current Radiographic Certification required, • Graduation from an accredited Dental Assisting School preferred, • Minimum 1 year of recent experience as a DA/RDA preferred, • Bilingual: English & Spanish required (if the geographic location of the office does not require the applicant to be bilingual, applicants who only speak English may be considered), • Means to travel from one office to another, required as necessary, • Ability to obtain an NPI, • Strong written and verbal communication skills, • Ability to work with people of all ages (i.e. Children), • Strong interpersonal and relationship skills, • Ability to work in a fast paced environment and able to multitask, • Ability to maintain outgoing, friendly attitude with patients and coworkers, • Ability to work with interruptions and to manage multiple priorities, • Ability to work with minimal supervision, • Ability to be organized Technological Skills • Autoclave/Chemiclave, • Ultrasonic, • X-Ray Machine, • X-Ray Processor, • X-Ray Duplicator, • Intra-oral Camera, • O2 and N2O, • Handpieces, • Digital X-ray Work Schedule The Black Floor Supervisor will be notified of the work schedule on a weekly, bi-weekly, or monthly basis. The Registered Dental Assistant’s schedule is subject to change (daily/weekly hours may increase or decrease) according to the needs of the practice. Evening and weekend hours may be required. This position is paid on an hourly basis. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to stand, sit, and walk; talk, hear, and smell; and use hands, fingers, and wrists (manual dexterity and hand-eye coordination) to handle or feel the mouth/teeth and gums of patients, as well as objects, tools, or controls associated with the dental field. The employee is frequently/occasionally required to reach; lift and/or move up to 25 pounds; and balance, stoop, bend, squat, kneel, crawl, climb, twist, pull, and crouch. The essential functions of this position will result in the following: hazardous exposure (chemical and infections)—constantly; non ionizing radiation (welding flash, microwaves, sun, etc.)—frequently; radiation (x-ray, radioactive, isotopes, etc.)—constantly; noise (loud/repetitive, 85 decibels per OSHA standard)—constantly; and personal protective equipment (PPE: respiratory masks, latex gloves, face shields, etc.)—constantly. Work Conditions and Risk General Dental Office conditions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The dental office environment may result in employees being exposed to toxic chemicals, radiation, infectious bodily fluids and materials, and increased noise level. This position assumes high risk. Independent Action Under general supervision of the Office Manager and Managing Doctor, regular duties performed by the Black Floor Supervisor require independent judgment. The Black Floor Supervisor must consult with her/his supervisor regarding patient problems or confrontation, policy issues, expenditures, and unusual problems. Black Floor Supervisors are not to perform expanded functions, which are not permissible by the Dental Practice Act, even if asked to do so by the doctor. If a Black Floor Supervisor is asked by the doctor to perform functions for which she/he is not permitted by the Dental Practice Act, she/he must inform the Office Manager, Managing Doctor, or the Regional Manager as soon as possible. (See Policy on “Expanded Functions”) Black Floor Supervisors are not to diagnose patients. This is the doctor's responsibility. Employees found doing so will be subject to disciplinary action up to, and including, termination. Limitations and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, skills, and physical demands required for the position. This job description is subject to possible modification to reasonably accommodate disabled individuals. Some requirements may exclude individuals who pose a direct threat or significant risk to health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by anyone occupying this position. Employees are required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with State and Federal laws. The job requirement represents the minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the employee must possess the abilities to perform each duty proficiently. Continued employment remains on an “at-will” basis.

Job Description Job Title: Structures Technician Job Description The Structures Technician researches technical data and performs inspection, repair, and replacement of aircraft sheet metal structures, including main landing gear fittings, aircraft skins, and floor beams, in accordance with applicable maintenance manuals, FAA regulations, and company policies and procedures. This role focuses on planning, fabricating, assembling, installing, and repairing metallic and nonmetallic components for a wide range of commercial aircraft, ensuring safety, structural integrity, and regulatory compliance throughout the service life of the fleet. Responsibilities • Research technical data and follow applicable maintenance manuals, FAA regulations, and company policies and procedures when performing all work., • Inspect, repair, and replace aircraft sheet metal structures, including main landing gear fittings, aircraft skins, and floor beams., • Read and interpret blueprints, sketches, and product specifications to determine the sequence and methods of fabricating, assembling, and installing sheet metal products., • Plan, lay out, fabricate, assemble, install, and repair sheet metal parts, equipment, and products using knowledge of metallic and nonmetallic materials, machining, and layout techniques., • Select appropriate gauge and type of sheet metal, such as stainless steel, steel, or aluminum, or nonmetallic materials such as plastics or fiberglass, according to product specifications., • Lay out and mark dimensions and reference lines on materials using scribes, dividers, squares, and rulers, applying shop mathematics and layout techniques to develop and trace patterns of products or parts., • Perform maintenance work such as repair and upkeep of company equipment and general shop housekeeping to maintain a safe and organized work area., • Make accurate entries in the Component Removal Log and complete identification tags and repairable/parts routing tags when removing components from aircraft., • Ensure proper documentation of training received by recording it in training records and obtaining required signatures, and make appropriate entries on routine and non-routine work cards., • Work on commercial aircraft larger than a CRJ 900, including Boeing and Airbus platforms, with a focus on structural and sheet metal tasks., • Participate in overtime work on an as-needed basis to support operational requirements., • Support a contract-to-hire arrangement by maintaining strong performance, safety, and work ethic to meet conversion expectations. Essential Skills • 3–5+ years of experience working with aircraft structures, sheet metal repair, and modification., • Hands-on experience with aircraft sheet metal repair, including riveting, drilling, and structural rework., • Demonstrated ability to read and interpret blueprints, sketches, and product specifications for aircraft structures and sheet metal fabrication., • Proficiency in planning, laying out, fabricating, assembling, installing, and repairing sheet metal parts and assemblies., • Experience working on commercial aircraft larger than a CRJ 900, with Boeing and Airbus platforms preferred., • Strong understanding of shop mathematics and layout techniques for pattern development and precise measurement., • Ability to select appropriate materials, including stainless steel, steel, aluminum, plastics, and fiberglass, based on product specifications., • Capability to perform physically demanding tasks, including lifting up to 50 lbs unassisted, frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level. Additional Skills & Qualifications • Experience in an MRO or aircraft modification environment, particularly with cargo conversion programs such as B777 cargo conversion., • Familiarity with aircraft maintenance documentation, including component removal logs, identification tags, and routing tags., • Basic set of personal tools suitable for aircraft sheet metal and structures work., • Experience with commercial aviation environments, including narrow and wide body aircraft and storage or reclamation operations. Why Work Here? The organization offers a comprehensive benefits package that supports employees’ health, financial security, and overall well-being, including medical coverage with Health Savings Account options, dental and vision insurance, disability and life insurance, and accidental death and dismemberment coverage. Employees have access to a wellness program, an employee assistance program, a 401(k) plan, company-paid holidays, and paid time off, supporting both long-term financial planning and work-life balance. The contract-to-hire structure provides a clear pathway to long-term employment for those who demonstrate strong performance and a positive attitude, creating opportunities for growth in a specialized aviation environment. Work Environment This role operates on a first shift schedule, typically from 6:00 a.m. to 2:30 p.m., Monday through Friday. Work is primarily associated with a B777 Cargo Conversion Program, with the possibility of assignments across the wider property as needed. The position requires extended periods of sitting, standing, and walking, along with frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level, and occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 pounds unassisted. The work environment includes exposure to high-intensity noise levels, extreme temperature changes, materials listed on Safety Data Sheets, unprotected heights, moving machinery, and aircraft fuel tank entry areas. Technicians operate equipment such as hydraulic press brakes, power shears, forming equipment, hand tools, lift equipment, stands, ladders, glass beading equipment, rivet guns, and drills. Appropriate personal protective equipment, including goggles, safety glasses, face shields, ear protection, aprons, gloves, and safety harnesses, is required to ensure a safe working environment. Job Type & Location This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $39.12 - $46.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jul 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Clinical Pharmacy Specialist Join our Shields team today! Shields Health Solutions is redefining patient care through health-system integrated specialty pharmacy. We're hiring an Ambulatory Clinical Pharmacy Specialist who will play a hands-on role in elevating patient care at a nationally recognized Academic Medical Center. In this dynamic, patient‑centered position, you'll build meaningful relationships with patients and providers while delivering high‑quality medication management. You'll work remotely, collaborating directly with care teams and practicing under a Collaborative Practice Agreement (CPA) to conduct virtual patient assessments, order and monitor evidence-based treatment plans, optimize therapy, and resolve medication-related problems. Location: Remote (Role supports a clinic in California) Salary: An employee in this position who performs the job duties in California can expect a salary rate between $145,000 and $180,000 (Hourly Equivalent: Approximately $69.71 - $85.54 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. An employee in this position who performs the job duties in any other state can expect a salary rate between $127,000 and $180,000 (Hourly Equivalent: Approximately $61.06 - $85.54 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. What You'll Get: • $10,000 Sign-on Bonus, • Salary + Bonus, • Medical, dental, and vision insurance starting day one, • 401(k) with match, 4 weeks PTO, 10 paid holidays, • Paid parental leave, short-term disability, and professional development, • Access to employee resource groups and wellness programs What You'll Do: • Provide comprehensive medication management, including reconciliation, dose optimization, adherence support, and drug‑level assessments aligned with evidence‑based standards., • Partner with physicians, specialists, and interdisciplinary teams to order individualized care plans under a CPA and promote seamless medication coordination., • Monitor therapy effectiveness and safety, identify optimization and intervene as appropriate., • Support quality‑improvement and REMS initiatives., • Provide recommendations to operations by supporting teammates as needed with complex prior authorizations, improving workflows, educating patients, and maintaining ongoing clinical development. What You Need: • Hold a Doctor of Pharmacy (PharmD), • Must be a licensed pharmacist in California, • Candidate must meet one of the following qualifications:, • Completion of a PGY2 Ambulatory Care Residency, • Completion of a PGY1 Residency and at least 1 year of ambulatory practice under a Collaborative Practice Agreement (CPA), • At least 3 years of ambulatory practice with disease state management, • Strong communication, organization, and tech skills, • Empathy, integrity, and a team-first mindset California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Clinical Pharmacist Join our Shields team today! Shields Health Solutions is redefining patient care through health-system integrated specialty pharmacy. We're hiring a Clinical Pharmacist. Provide integrated support to patients and physicians by providing a "hands-on" approach to improve the quality of patient care. This is accomplished by developing personalized relationships with patients and prescribers to improve medication adherence and promote evidence-based care. Location: Remote (Role supports a clinic in California) Salary: An employee in this position who performs the job duties in California can expect a salary rate between $130,000 and $140,000 (Hourly Equivalent: Approximately $62.50 - $67.31 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. An employee in this position who performs the job duties in any other state can expect a salary rate between $127,000 and $140,000 (Hourly Equivalent: Approximately $61.06 - $67.31 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. What You'll Get: • Salary + Bonus, • Medical, dental, and vision insurance starting day one, • 401(k) with match, 4 weeks PTO, 10 paid holidays, • Paid parental leave, short-term disability, and professional development, • Access to employee resource groups and wellness programs What You'll Do: Conduct comprehensive clinical reviews, monitor patient adherence, and recommend evidence‑based therapeutic adjustments to improve outcomes across oncology and other specialty disease states. Lead daily workflow, ensure regulatory compliance, oversee support staff, resolve insurance and authorization barriers, and drive productivity and process‑improvement initiatives. Deliver direct clinical interventions, coordinate with healthcare teams, contribute to protocol development and research, and maintain ongoing professional education to support high‑quality patient care. What You Need: • Hold a Doctor of Pharmacy (PharmD), • Must be a licensed pharmacist in California, • 1+ years experience as a clinical pharmacist (preferred), • Strong communication, organization, and tech skills, • Empathy, integrity, and a team-first mindset California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Pharmacotherapy Pharmacy Technician Location: Fullerton, CA The role is remote to start, with the potential for a future hybrid arrangement depending on business needs. Any changes to work location expectations will be communicated ahead of time. Compensation: An employee in this position can expect an hourly compensation range of $28.00/hr - $36.00/hr. The actual compensation range will depend on experience, seniority, geographic location, and other factors permitted by law. Sign-On Bonus: $5,000.00 Job Purpose: The Pharmacy Technician supports the Pharmacotherapy Clinic by assisting pharmacists with patient communication, follow‑up, and care coordination activities. This role focuses on enhancing patient access to clinical services, supporting medication management processes, and ensuring that patients receive timely monitoring and appropriate follow‑up throughout their therapy. The Technician contributes to safe, efficient, and patient‑centered clinical operations within a non‑dispensing environment. Job Duties: • Conduct routine patient check‑ins to monitor therapy experience, identify concerns, and support adherence to treatment plans., • Assist with initial outreach to confirm therapy start and assess early treatment experience., • Coordinate patient appointments, follow‑up visits, and clinical monitoring schedules., • Support pharmacists by completing delegated tasks such as gathering patient information, preparing charts or notes, and managing task queues., • Track and follow up on required labs or monitoring parameters, ensuring completion and communicating status to the care team., • Prepare and route prescription‑related requests or medication renewals to the pharmacist for review., • Maintain clear and timely documentation in all required systems to support continuity of care., • Facilitate workflow efficiency by organizing patient lists, call queues, and clinical follow‑up tasks., • Maintain confidentiality and adhere to clinic standards, policies, and professional expectations., • Participate in relevant training, team meetings, and process improvement initiatives., • Perform other duties as assigned. Skills: strong interpersonal communication skills, strong phone skills, highly proficient in Epic, and Microsoft Office particularly Excel and Word; able to quickly learn other programs and able to extract relevant information; strong organizational skills a must. Traits: Organized, high-integrity, attention to detail, dependable, quality focus, empathetic, good listener/communicator. Other: energetic, highly motivated, team player with strong personal and communication skills; discretion and confidentiality essential as position deals with highly sensitive and private data. Experience/ Education: Required Licensure/Certification: We are seeking experienced pharmacy technicians who are state registered as pharmacy technician. Nationally certified as a CPhT or equivalent is strongly preferred but not required. Should additional licensure need to be obtained, the applicant will commit to obtaining the required licensure within a mutually agreed upon timeframe. Continued employment is contingent upon meeting these requirements. Years of Experience: Required: 1+ years, Preferred: 5-8 years of experience as a Pharmacy Technician. Experience working with physicians, nurses, and other healthcare professionals (preferably in a medical clinic) is a plus. Education: High school diploma or GED required California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary: Under general supervision and according to established policies and procedures, the X-ray Technologist will perform quality images of bones, soft tissues, and organs as instructed. Essential Functions of an X-ray Technologist: • Verifies patient identity and review physicians’ orders before beginning x-ray procedures., • Uses x-ray equipment to take radiographic images of patients' bones, tissues, and organs as per physicians’ written orders., • Explain x-ray procedures to patients and answer questions., • Positions patients to include lifting and moving patients with limited mobility., • Limits patients’ exposure to radiation by placing lead shields on patients where needed., • Ensures quality x-rays are taken to prevent repeat procedures., • Works closely with the Radiologist to determine whether further tests are required., • Ensures that x-ray equipment is regularly serviced and in good working order, promptly notifying management of damaged or malfunctioning x-ray equipment., • Maintains an accurate record of completed x-ray procedures. Required Skills/Abilities: • Possesses a skilled level and working knowledge of X-ray scanning technology., • Competency in instructing fellow X-ray Technologists in the art of scanning., • The ability to communicate with radiologists and other healthcare providers about images and patient care., • Demonstrates skill and knowledge to identify abnormalities while performing X-rays., • Initiative to obtain additional scans, views, or extremely technical factors to provide maximum information for the radiologist to make an accurate diagnosis., • Maintain sensitivity to physical and psychological needs of patients, • Maintains patient confidentiality in compliance with HIPPA guidelines. Education and Experience: • ARRT Certification, • CPR/ BLS Certification, • Must have min 2 years of experience Physical Requirements: • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • Work generally does not involve occupational risk; however, failure to follow established procedures and safety practices could result in minor injury, e.g., minor cuts, needle punctures, bruises from falls on slippery floors, or back injuries sustained while assisting in moving, lifting, or positioning patients, equipment, or materials. What We Offer: • PTO for full-time employees, • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances, • 401(k) Retirement Plan, • Employee Assistance Program

Job Description Job Purpose: Provides integrated off-site support to patients, pharmacists, and providers by providing a full-service approach to total quality patient care. Works closely with patients to deliver a full continuum of medication adherence support by utilizing our various tools and applications. Encourages patients of specialty clinics to utilize the hospital partner pharmacy to fully benefit from its superior patient care services. Job Duties: • Provide "legendary" care to hospital patients by providing a full suite of custom medication management services., • An off-site member of the clinic team providing prior authorization, financial assistance, patient medication on-boarding services, and patient refill/renewal support., • Educate prospective pharmacy patients on how the hospital pharmacy serves patients and improves their overall care., • Handle all medication needs of patients., • Grow the specialty pharmacies patient population by strictly adhering to Shields' programs and processes with enthusiasm and purpose., • Resolve insurance related issues, complete benefit investigations, including prior authorizations (PAs) as an agent of the provider., • Review the patients need for financial assistance and secure financial assistance when needed and available., • Document patient information within the hospital EMR, Therigy and all Shields proprietary tools as required., • Ensure that patients remain on track with medication regimens- outbound therapy/medication adherence check-ups, refill prescription., • Secure prescription renewals., • Communicate directly with patients to assist them in the awareness of their medications, • Identify medications requiring special storage and/or handling such as hazardous medications and/or refrigerated medication., • Identify supplies necessary for select medications such sharps containers, needles/syringes, alcohol swabs, Band-Aids., • Answer, resolve and triage inbound inquiries., • Achieve operational objectives by inputting data, performing adjudication on test claims and preparing action plans for follow-up., • Apply observations and recommendations to operational issues, increased productivity, quality, and customer-service standards., • Actively participate in process improvement initiatives., • Protect organization's value by keeping information confidential., • Update knowledge by participating in educational opportunities; reading professional publications; maintaining networks; participating in professional organizations., • Other duties as assigned. Skills: Strong interpersonal communication skills, exceptional phone skills, comfortable with proactively engaging patients telephonically, comfortable reaching out to on-site clinicians, payors, and pharmacies telephonically, highly proficient in Microsoft Office particularly Excel and Word; able to quickly learn other programs, adapt to Shields' unique model / tools and able to extract relevant information; strong organizational skills a must. Traits: Organized, high-integrity, high accountability, attention to detail, dependable, quality focus, empathetic, good listener/communicator, collaborative, consistently arrives to work on-time with minimal unscheduled time off. Other: Energetic, highly motivated, team player with strong personal and communication skills, ability to sit and/or stand with focus at a workstation for a long period of time; discretion and confidentiality essential as position deals with highly sensitive and private data. Specialties Experience and knowledge in working in one or more of the following disease states a plus: transplant, hepatitis C, infectious disease (including HIV), diabetes, MS, oncology. Education/Experience: Required Licensure/Certification: We are seeking experienced pharmacy technicians who are state registered as a pharmacy technician. Nationally certified as a CPhT or equivalent is strongly preferred but not required. Should additional licensure need to be obtained, the applicant will commit to obtaining the required licensure within a mutually agreed upon timeframe. Continued employment is contingent upon meeting these requirements. Years of Experience: Required 2-3 years, Preferred 3-5 years' experience as a Pharmacy Technician. Education: High School Diploma or GED required. Salary: An employee in this position can expect a salary rate between $55,000 and $70,000 plus bonus pursuant to the terms of any bonus plan if applicable. The actual salary will depend on experience, seniority, geographic location, and other factors permitted by law. California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionMahmee is on a mission to make the United States the best place in the world to give birth by providing wraparound pregnancy and postpartum care that treats the whole you! Mahmee's overarching goal with infant feeding is to deliver expert-level lactation support and education to families in-hospital and post-discharge. While promoting breastfeeding remains a primary objective, we are committed to respecting a family's right to choose the best feeding method for them. Mahmee is backed by some of the most well-known venture capital investors in the world, including Goldman Sachs Asset Management, Mark Cuban, Serena Williams, and Arlan Hamilton, among others. We provide lactation support services 7 days a week. This role will primarily be Monday-Friday, however, all Consultants on the team are expected to work at least one weekend during a calendar month, and will have days off during the week when they are scheduled to work that weekend. The goal of this role is to deliver quality, compassionate patient care in an office setting to improve breastfeeding outcomes.To accomplish this goal, you’ll need knowledge in: • Infant feeding behaviors, with emphasis on the first 42 days of life., • Knowledge of galactagogue indications and use., • Knowledge of symmetrical latching techniques, • Common breastfeeding challenges in the first 12 months of life., • Evidence-based Indications for infant feeding supplementation, • Milk collection and storage guidelines, • Breastfeeding management strategies for patients of low-risk to high-risk issues.You must have all of these skills:, • Selecting and using feeding devices such as supplemental nursing systems, nipple shields, bottles, and finger feeding to improve health outcomes., • Conducting maternal and infant assessments to identify feeding challenges., • Strong clinical and critical thinking skills., • Hands-on latching and positioning instruction, • Providing non-judgemental, compassionate patient care, with excellent bedside manner., • Communicating treatment plans and rationale to patients and care providers.Your responsibilities include but are not limited to:, • Conduct lactation consultations in an outpatient clinic setting for patients with low to moderate-risk issues., • Use clinical and critical thinking skills to assess, diagnose, and treat breastfeeding challenges., • Counsel patients on breastfeeding techniques and strategies, individualized to the family's feeding goals., • Construct age-appropriate and sustainable feeding plans that support the health of the dyad and their feeding goals while prioritizing the patient's comfort and experience., • Utilize and apply company treatment protocols and standards when providing care., • Collaborate with colleagues and the Lactation Manager on the patient caseload, treatment plans, patient follow-up, referrals, and challenges identified., • Document all patient care and interactions in the company's EHR., • Provide follow-up communication to patients to evaluate or modify existing care plans., • Instruct patients on milk expression techniques and products.Requirement, • Active IBCLC Certification Mahmee’s Commitment as an Equal Opportunity Employer Mahmee values diverse experiences. If you have important skills that we haven't listed here, please don’t hesitate to apply and tell us more about your unique expertise. Just like we fight for equitable access to healthcare, we also stand for equitable access to career opportunity. Inclusive hiring is incredibly important to our organization, and we welcome individuals of all cultural backgrounds and experiences to apply to our open positions. We especially encourage members of traditionally underrepresented communities to apply, including women, people of color, LGBTQ people, veterans, and people with disabilities.

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With focus on four key platforms, our vision is to provide topnotch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Job Summary: Under general supervision and according to established policies and procedures, the X-ray Technologist will perform quality images of bones, soft tissues, and organs as instructed. Essential Functions of an X-ray Technologist: • Verifies patient identity and review physicians’ orders before beginning x-ray procedures., • Uses x-ray equipment to take radiographic images of patients' bones, tissues, and organs as per physicians’ written orders., • Explain x-ray procedures to patients and answer questions., • Positions patients to include lifting and moving patients with limited mobility., • Limits patients’ exposure to radiation by placing lead shields on patients where needed., • Ensures quality x-rays are taken to prevent repeat procedures., • Works closely with the Radiologist to determine whether further tests are required., • Ensures that x-ray equipment is regularly serviced and in good working order, promptly notifying management of damaged or malfunctioning x-ray equipment., • Maintains an accurate record of completed x-ray procedures. Required Skills/Abilities: • Possesses a skilled level and working knowledge of X-ray scanning technology., • Competency in instructing fellow X-ray Technologists in the art of scanning., • The ability to communicate with radiologists and other healthcare providers about images and patient care., • Demonstrates skill and knowledge to identify abnormalities while performing X-rays., • Initiative to obtain additional scans, views, or extremely technical factors to provide maximum information for the radiologist to make an accurate diagnosis., • Maintain sensitivity to physical and psychological needs of patients, • Maintains patient confidentiality in compliance with HIPPA guidelines. Education and Experience: • ARRT Certification, • CPR/ BLS Certification Physical Requirements: • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • Work generally does not involve occupational risk; however, failure to follow established procedures and safety practices could result in minor injury, e.g., minor cuts, needle punctures, bruises from falls on slippery floors, or back injuries sustained while assisting in moving, lifting, or positioning patients, equipment, or materials. What We Offer: • PTO for full-time employees, • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances, • 401(k) Retirement Plan, • Employee Assistance Program, • Rezolut Academy, a career pathways program to help further your career

Job Description Clinical Pharmacy Specialist, Oncology Join our Shields team today! Shields Health Solutions is redefining patient care through health-system integrated specialty pharmacy. We're hiring an Ambulatory Oncology Clinical Pharmacy Specialist who will play a hands-on role in elevating patient care at a nationally recognized Academic Medical Center. In this dynamic, patient‑centered position, you'll build meaningful relationships with patients and providers while delivering high‑quality medication management. You'll work remotely, collaborating directly with care teams and practicing under a Collaborative Practice Agreement (CPA) to conduct virtual patient assessments, order and monitor evidence-based treatment plans, optimize therapy, and resolve medication-related problems. Location: Remote (Role supports a clinic in California) Salary: An employee in this position who performs the job duties in California can expect a salary rate between $145,000 and $180,000 (Hourly Equivalent: Approximately $69.71 - $85.54 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. An employee in this position who performs the job duties in any other state can expect a salary rate between $127,000 and $180,000 (Hourly Equivalent: Approximately $61.06 - $85.54 per hour, based on a 40-hour workweek.) plus bonus pursuant to the terms of an any bonus plan if applicable. The actual salary will depend on experience, geographic location, and other factors permitted by law. What You'll Get: • $10,000 Sign-on Bonus, • Salary + Bonus, • Medical, dental, and vision insurance starting day one, • 401(k) with match, 4 weeks PTO, 10 paid holidays, • Paid parental leave, short-term disability, and professional development, • Access to employee resource groups and wellness programs What You'll Do: • Provide comprehensive medication management, including reconciliation, dose optimization, adherence support, and drug‑level assessments aligned with evidence‑based standards., • Partner with physicians, specialists, and interdisciplinary teams to order individualized care plans under a CPA and promote seamless medication coordination., • Monitor therapy effectiveness and safety, identify optimization and intervene as appropriate., • Support quality‑improvement and REMS initiatives., • Provide recommendations to operations by supporting teammates as needed with complex prior authorizations, improving workflows, educating patients, and maintaining ongoing clinical development. What You Need: • Hold a Doctor of Pharmacy (PharmD), • Must be licensed pharmacist in California, • Candidate must meet one of the following qualifications:, • Completion of a PGY2 Oncology Residency, • Completion of PGY1 Ambulatory Care Residency and at least 3 years of experience as a clinical oncology pharmacist, • Have at least 3 years of experience as a clinical pharmacist in oncology, including 1 year practicing under a Collaborative Practice Agreement (CPA), • Strong communication, organization, and tech skills, • Empathy, integrity, and a team-first mindset California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionMahmee is on a mission to make the United States the best place in the world to give birth by providing wraparound pregnancy and postpartum care that treats the whole you! Mahmee's overarching goal with infant feeding is to deliver expert-level lactation support and education to families in-hospital and post-discharge. While promoting breastfeeding remains a primary objective, we are committed to respecting a family's right to choose the best feeding method for them. Mahmee is backed by some of the most well-known venture capital investors in the world, including Goldman Sachs Asset Management, Mark Cuban, Serena Williams, and Arlan Hamilton, among others. We provide lactation support services seven days a week. This role will primarily be in the evening from 1:00 p.m. to 9:00 p.m. or 2:00 p.m. to 10:00 p.m. This role will primarily be Monday-Friday, however, all Consultants on the team are expected to work at least one weekend during a calendar month, and will have days off during the week when they are scheduled to work that weekend. Location: Santa Monica The goal of this role is to deliver quality, compassionate bedside patient care in the hospital setting to improve breastfeeding outcomes.To accomplish this goal, you’ll need knowledge in: • Newborn Feeding Behaviors: Newborn feeding behaviors in the first 42 days of life., • Latching and Positioning: Latching and positioning newborns using symmetrical latch techniques., • NICU Patient Needs: Have a thorough understanding of the unique needs of NICU patients, • Feeding Challenges: Understand the common feeding challenges of dyads with complex medical situations such as SGA, pre-term delivery, hyperbilirubinemia, low blood sugar, IUGR, and LGA, • Breast Pump Operation: Understand the operation of breast pumps and their indications for use., • Impact of Birthing Practices: Understand the impact of birthing practices on breastfeeding.You must have all of these skills:, • Feeding Devices: Proficiency in selecting and using feeding devices such as supplemental nursing systems, nipple shields, and finger feeding to improve health outcomes., • Communication: Excellent communication with patients, team members, and hospital staff, • Clinical and Critical Thinking: Strong clinical skills combined with critical thinking abilities, • Workload Management: Ability to prioritize and manage patient workload based on acuity levels, • Assessment Skills: Conducting maternal and infant assessments to identify feeding challenges, • Latch and Position Instruction: Providing bedside instruction on proper latch and positioning techniques.Your responsibilities include but are not limited to:, • Provide hands-on, clinical lactation guidance and support to mother-baby dyads on breastfeeding techniques and challenges at the bedside., • Educate and instruct mother-baby dyads on hand expression, milk collection, breast pump use, and the use of various feeding devices., • Document patient care promptly in the company’s EHR and EPIC systems., • As part of an interdisciplinary team, collaborate with hospital staff, physicians, nurses, and occupational and physical therapists to develop feeding plans for a range of infants, from normal newborns to complex neonates., • Use clinical and critical thinking skills to assess, diagnose, and treat breastfeeding challenges., • Construct appropriate feeding plans to support the health of the dyad and their feeding goals., • Counsel patients on breastfeeding techniques and strategies, individualized to the dyad's unique medical needs., • Monitor and report to hospital staff on patient's progress with breastfeeding, • Ensure feeding equipment is properly stocked and cleaned., • Engage in staff education sessionsRequirement, • Active IBCLC Certification, • Available to work evening shifts: 1:00 p.m. to 9:00 p.m. or 2:00 p.m. to 10:00 p.m.Mahmee’s Commitment as an Equal Opportunity EmployerMahmee values diverse experiences. If you have important skills that we haven't listed here, please don’t hesitate to apply and tell us more about your unique expertise. Just like we fight for equitable access to healthcare, we also stand for equitable access to career opportunity. Inclusive hiring is incredibly important to our organization, and we welcome individuals of all cultural backgrounds and experiences to apply to our open positions. We especially encourage members of traditionally underrepresented communities to apply, including women, people of color, LGBTQ people, veterans, and people with disabilities.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: Relativity's Integrated Performance teams ensure that our products work across all systems and disciplines, from trajectory design to aerodynamics to reliability analysis and beyond. Our groups size the Terran R rocket, design its missions for customer success, reliability, and reusability, and ensure that every system on the rocket and ground is engineered correctly for the demanding environments of launch and entry. Recently, we completed the preliminary design and analysis of Terran R including Relativity's first-ever work on launch vehicle reusability, spanning advanced trajectory simulations, wind tunnel testing, and structures analysis, among many other projects. About the Role: • Develop and execute computational fluid dynamics (CFD) analyses to solve novel challenges in vehicle entry heating and supersonic retropropulsion, • Drive the design of major Terran R system elements – like fins, flaps, heat shields, and primary structure – to meet criteria for temperature and heating, • Guide and mentor responsible hardware engineers to ensure hardware meets aerothermal requirements, • Scope and develop aerothermal databases for ascent and entry, including uncertainty quantification, from multiple sources like CFD, empirical methods, and wind tunnel testing, • Size thermal protection systems (TPS) for flight, • Support re-usable TPS material development and testing, • Mature Relativity's tools for developing and communicating aerothermal data, including custom and commercial code, databases, and data processing tools To be successful in this role, you should be self-motivated, adaptable, and able to contribute significantly to a fast-paced, integrated vehicle program. You should also be able to resolve ambiguity and drive projects to completion. Ideally, you have significant compressible flow, CFD, thermal analysis, and conjugate heat transfer experience as well as a proven track record completing projects successfully in a highly collaborative environment. On a weekly basis, you will be performing analysis, developing software tools, and supporting design teams. You will also use your strong organizational skills to properly manage the documentation and communication of your actions, recommendations, and decisions. About You: • Undergraduate degree in engineering or related field, • 2+ years relevant experience, • Proficiency in compressible flow and thermal analysis, preferably on entry vehicles, • Experience executing CFD workflows for external flow, preferably including engine plume simulation, • Experience solving cross-disciplinary design problems on integrated vehicles, • Proficiency in Python and industry-standard CFD tools like FUN3D and Star-CCM+, including use of HPC clusters Nice to Haves, but Not Required: • Graduate degree in engineering or related field, • 5+ years relevant experience across 1 or more program lifecycles, • Experience with thermal protection system sizing & analysis using standard tools like FIAT, CHAR, MINIVER, or LAURA, • Exposure to aerothermal instrumentation, wind tunnel and flight testing At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$103,000—$142,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Return to Job Search Route Manager Are you a self-starter? Are you tired of being locked down in an office all day? Do you crave the flexibility to manage, plan and execute your day-to-day workload? If so, then this opportunity is the one for you! As an Area Field Manager, you will be responsible for actively promoting the U-Haul brand and educating our independent business partners and leaders on the benefits and advantages of becoming a U-Haul dealer. U-Haul Offers: Full medical coverage, if eligible Prescription plans, if eligible Dental and vision plans Registered Dietitian Program, if eligible Gym Reimbursement Program Weight Watchers, if eligible Virtual doctor visits Career stability Opportunities for advancement Valuable on-the-job training Tuition Reimbursement Program Free online courses for personal and professional development at U-Haul University Business-travel insurance You Matter Employee Assistance Program Paid holidays, vacation and sick days, if eligible Employee Stock Ownership Plan (ESOP) 401(k) savings plan Life insurance Critical illness/group accident coverage 24-hour physician available for kids MetLaw Legal Program MetLife auto and home insurance Mindset App Program Discounts on cell phone plans, hotels and more LifeLock identity theft protection Savvy consumer-wellness programs - from health-care tips to financial wellness Dave Ramsey's SmartDollar Program U-Haul Federal Credit Union membership Area Field Manager Primary Responsibilities include: Work with small businesses within your designated route to prospect, open and grow the U-Haul dealership organization. Develop and manage business relationships with small business owners and U-Haul dealerships to provide professional insight into local markets and the ability to train and educate dealers on areas for potential growth. Manage your routes profit and loss through careful analysis to effectively grow your route through transactions by providing products and services to the communities you serve. Service and maintain current U-Haul equipment and displays to ensure operational excellence and marketability. Work with support staff to ensure the success of U-Haul dealerships within your route with efficiency. Operate a properly stocked and maintained U-Haul service vehicle that will be used to properly distribute equipment throughout your route. Perform minor repair and maintenance on U-Haul equipment. Arrange for the recovery of lost, stolen or abandoned U-Haul equipment. Participate in ongoing continuous U-Haul education through U-Haul University. Minimum Requirements: Valid driver's license and the ability to maintain a good driving record to operate commercial motor vehicles High school diploma or equivalent Must be able to obtain a D.O.T. health certificate from a federally registered medical examiner Work Environment: The work involves moderate risks or discomforts which require special safety precautions, e.g. working around moving parts, machines, fumes or irritant chemicals. May be required to use protective clothing or gear such as masks, goggles, gloves or shields. Physical Demands: The work requires some physical exertion such as long periods both indoors and outdoors while remaining stationary, traversing spaces, repositioning to reach and use tools, and moving a minimum of 50 lbs. assisted or unassisted. U-Haul is an equal opportunity employer. All applications for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state, or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.

Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of "Keeping Our Heroes Connected"? The opportunity Silvus is seeking a Quality Control Inspector-I who will report to the Quality Control Inspection Supervisor on the OQC team. Primary responsibilities will include conducting thorough inspections, maintaining accurate documentation, and ensuring proper procedures are followed for incoming electronic and mechanical parts and during the manufacturing and testing process. This role is also responsible for investigating any quality issues, anomalies, or failures and will work alongside engineering and suppliers to recommend any necessary changes or improvements. This position is fully onsite, Monday through Friday, based at Silvus Technologies' Culver City warehouse location. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. Role and responsibilities • Perform and document inspections of products and processes, including electronic cables, GPS devices, Wi-Fi dongles, connectors, mechanical enclosures, shields, and other critical components., • Conduct inspections tied to receiving raw materials, parts, components, and fit checks as necessary., • Inspect First Article components and subassemblies., • Prepare in-process inspection reports, ensuring completeness and accuracy., • Maintain Quality documentation., • Identify the serviceability of parts and components and appropriate tooling., • Perform other related duties of which the above are representative. Required qualifications • High School Diploma or GED., • Basic computer skills, including familiarity with Google Suite, Microsoft Office, or similar software., • Ability to follow written instructions and maintain accurate records., • Strong attention to detail and willingness to learn., • Ability to work in a fast-paced environment and manage multiple tasks., • Good verbal and written communication skills., • Ability to work effectively both independently and as part of a team., • NOTE - Must be a U.S. Person (U.S. Citizen or U.S. Permanent Resident) due to clients under U.S. federal contracts., • All employment is contingent upon successful completion of a background check and drug test. Preferred knowledge, skills, and abilities • IPC-J-STD-001, IPC-A-610, and/or IPC/WHMA-A-620 certification (current or previously held) is highly preferred. Familiarity with electronic assemblies, PCBs, cable assemblies, and electro-mechanical systems is a plus., • Prior experience in manufacturing, quality inspection, assembly, or production environments is preferred; experience with inspection tools such as calipers, microscopes, multimeters, or magnification devices is a plus., • Ability to identify workmanship defects, cosmetic issues, and nonconforming conditions within electronic assemblies is preferred., • Interest or passion for electronics, technology, aerospace, defense, or related technical industries., • Ability to quickly learn technical processes, inspection criteria, and company procedures in a fast-paced manufacturing environment., • Strong organizational and time management skills, with the ability to effectively prioritize workload and manage multiple assignments simultaneously., • Comfortable working both independently and collaboratively within cross-functional production and quality teams., • Demonstrates a proactive attitude, strong work ethic, and commitment to producing high-quality work., • Basic understanding of ESD (Electrostatic Discharge) awareness and handling practices is a plus., • Experience reading or interpreting assembly drawings, work instructions, or basic technical documentation is preferred. Working conditions and physical requirements • Occasional exposure to heat and cold., • While performing the duties of this job, the employee is required to do the following:, • Perform bending and reaching movements to place items on lower and higher shelves., • Kneeling or squatting to access lower shelves., • Must be able to lift up to 50 lbs. when receiving incoming part shipments., • Walking/Moving in the labs. Compensation: $24.20 - $25.30 / hourly Consistent with Motorola Solutions values and applicable law, we provide the following information to promote pay transparency and equity. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate. NOTE - As a US Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements (needed for some Engineering or R&D roles) will be included in the Required Qualifications section of the posted position. This does NOT apply to international positions; only job postings for positions located in the US • High School Diploma or GED.., • NOTE - Must be a U.S. Person (U.S. Citizen or U.S. Permanent Resident) due to clients under U.S. federal contracts., • All employment is contingent upon successful completion of a background check and drug test. None None Experienced Yes Our U.S. Benefits include: • Incentive Bonus Plans, • Medical, Dental, Vision benefits, • 401K with Company Match, • 10 Paid Holidays, • Generous Paid Time Off Packages, • Employee Stock Purchase Plan, • Paid Parental & Family Leave, • and more! EEO Statement Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic. We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team. We're committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

Job Description Cleaning Line Technician 1 (Laboratory) Rate: $18 /HR Term: Contract Temp - Perm Location: Torrance Cleaning Line Technician is responsible for one or more fundamental aspects of the cleaning process of glass and optical components. Potential tasks may include: loading, cleaning, maintenance and care of tooling, and inspection of glass and optical components. The nature of all production positions is repetitive motions for extended periods of time. Essential Duties and Functions: -Follow customer specifications and requirements as specified on the route sheet. -Perform tasks such as unwrapping, wrapping, cleaning, etc. within the allotted time. -Adjust for all standard type parts. -Cut kapton plastics and shields for parts. -Wash and clean glass correctly. -Make sure all tooling to be used is in good working order (clean, not bent, correct rails, etc.). -Clean and foil machines as required. -Follow priorities given by manager. -Identify nonconforming products and inform manager. -Complete documentation properly and neatly. -Understand the production schedule for the next day. -Make suggestions for improvements as necessary. -Help organize various departments to work efficiently to get the work processed out and to the customer. -Follow good work ethics and ensure that all procedures are followed. -Unwrap parts -Wash large optics -Wash monitor chips -Adjust tooling -Add shields to parts -Inspect to 80/50 and 60/40 -Final wipe parts Knowledge, Skills, and Abilities: -Ability to work in a clean room environment -Ability to work independently or on a team -Ability to follow detailed instructions and procedures to complete tasks and required documentation -Good oral and written communication skills Other Responsibilities: -Keep area clean at all times. -You are responsible for the care of the tooling that is used for operations. -Must be reliable, dependable, and punctual. -Be available for overtime requirements. -Be willing to help in any other area. -It is your responsibility to inform management or your trainer of tasks you may not be sufficiently trained to do. For consideration, please apply online athttp://www.expresspros.com/torranceca/ or schedule an appointment by calling 310.923.7580. Impacting people. One job at a time. Express Employment Professionals Torrance is your local resource for your employment search. You should be proficient in: • Glass Cutting, • Glass Fabrication, • Blueprint Reading, • Basic Computer Skills

Job Description $20.25 - $22.45 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. SUMMARY: Reporting to the Transportation Manager, the Installer II installs and de-installs modular furniture systems as directed by Supervisor. This position physically lifts, carries and/or pushes and pulls furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. Responsible to load and unload trucks from loading dock, using ramps or on lift-gates. May assist in setting & offsetting goods on equipment. Responsible to produce a quality install/move for the customer. Assists the install/move process by communicating with supervisors, the end users/customer, and other crewmembers. Uses extreme care not to damage goods or facilities during the install/move. This position is also responsible for reporting and escalating any related issues about the job, crew or customer to the Lead Foreman, Driver Foreman, Supervisor, Project Manager or Account Manager. Typically obtains daily site work role assignments from the Lead Foreman, Driver Foreman, Supervisor or Project Manager, however, has a dotted line to the Dispatcher or Operations Supervisor and directly reports to the Transportation Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: • Checks for start time (for next day’s work schedule) with dispatch daily., • Arrives at Corovan dispatch office (or on-site), in complete uniform every day., • Obtains daily work assignments from dispatch or operations manager., • Installs systems walls, splines and componentry, handles, and stages product, performs detail work and trash-out functions on install projects., • Sets, offsets, pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required., • Read install plans and identify starting locations, staging locations and changes., • Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved and supervises others doing the same. If assigned as a lead, completes all paperwork accurately and neatly and turns into operations daily. Customer Relations: • Maintain excellent customer service with the customers, transportation, warehouse, sales, and operation teams to establish solid relationships., • Must be punctual at all times. If an emergency arises, inform the supervisor and warehouse manager immediately, so that appropriate coverage can be arranged., • Must work cooperatively with members of the crew., • Must be courteous, helpful, and professional to all existing and potential customers both internal and external., • Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations., • Must follow all confidentiality rules regarding any products, services, or documents that are visible at a customer’s move site., • Must follow all security rules for the company and assigned customers. Training: • Train Installer I employees under the direction of the supervisor. Safety: • Performs work with quality, efficiency, and safety at all times., • Must abide by all safety rules; to include proper safety equipment (PPE) (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law)., • Drives forklifts and bobtails if qualified safely (requiring everyone in cab to wear seatbelts, slow speeds, ensuring trucks are chalked and using proper plates, etc.)., • Report any unsafe dangerous requests from customers to senior management. Other duties: • Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement., • If also a qualified and approved driver, drives trucks up to and including Class C vehicles., • All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: • ORGANIZATION SKILLS – Organization and project planning skills with ability to juggle multiple assignments and tasks., • LANGUAGE SKILLS – Ability to read and interpret documents written in English such as procedures, work instructions, blueprints, and timesheets. Ability to effectively communicate with customers and coworkers., • MATHEMATICAL SKILLS – Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY – Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • OTHER DUTIES:, • Problem solving and strong decision-making skills, • Must be familiar with and able to train others using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, J bars, etc., etc., • Must be familiar with basic systems furniture nomenclature and be able to identify upon sight, the major lines of the three major manufactures: Steelcase, Herman Miller, and Haworth., • Must be familiar with project management reports such as Gantt and Pert charts and understand and interpret cut sheets., • Must be able to produce detailed inventories of all goods exposed to on install projects., • Must be able to accurately estimate small move and install projects to determine manpower, trucks, and equipment necessary to complete the tasks required., • Must own and bring to work every day, a complete set of Installer II level installation tools as defined in Corovan installation policy., • Must be able to produce red-line and stick drawings., • Must be able to conduct a customer pre-move meeting, post destination signage and communicate all standard move and install protocol to the customers., • Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage., • Must complete Mover I & II, and Installer I & II Level Corovan University training and pass the written tests. May also be required to pass Driver I or II classes if an approved and qualified driver. EDUCATION and/or EXPERIENCE: • High School Diploma and/or general education degree (GED); or two to three (2-3) year’s related experience and/or training or equivalent combination of education and experience., • Valid California driver’s license may be required., • If driving on behalf of the company, a valid driving record that meets the company’s insurance carrier’s requirements., • Two (2) years of installation/moving experience required, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, and J bars. PRIMARY LOCATION: Orange County. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. • Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., • Handling: Seizes, helps, or works with hands., • Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., • Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., • Standing: Remains in standing position if required to perform various functions of the job., • Stooping: Bends body downward and forward by bending at knees or waist., • Vision: Reads paperwork and records on the computer or hand-held devices., • Talking: Communications by phone, email, text and in person., • Sitting: May be required to sit at desk. May sit for long periods of time., • Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., • Heights: May include working at height on a loading dock up, lift-gate, or scissor lift. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. • Temp/Weather: Works in either 1) Office environment – for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside – may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., • Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: • Variable hours, non-exempt, regular position., • Employees might be required to work late evenings or weekends depending on the business needs., • All overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description $21.75 - $24.52 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. SUMMARY: Reporting to the Transportation Manager, the Installer III Installs and de-installs modular furniture systems as directed by Supervisor. May be called upon to run small install and move projects. Lifts, carries and/or pushes and pulls furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. Responsible to load and unload trucks from loading dock, using ramps or on lift-gates. May assist in setting & offsetting goods on equipment. Responsible to produce a quality install/move for the customer. Assists the install/move process by communicating with supervisors, the end users/customer, and other crewmembers. Uses extreme care not to damage goods or facilities during the install/move. This position is also responsible for reporting and escalating any related issues about the job, crew or customer to the Supervisor, Lead Foreman, Project Manager, or Account Manager. Typically obtains daily site work role assignments from the Supervisor, Lead Foreman, or Project Manager, however, has a dotted line to the Dispatcher, Operations Supervisor and directly reports to the Transportation Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: • Checks for start time (for next day’s work schedule) with dispatch daily., • Arrives at Corovan dispatch office (or on-site), in complete uniform every day., • Obtains daily work assignments from dispatch or operations manager., • Installs systems walls, splines, and componentry, handles, and stages product, performs detail work and trash-out functions on install projects., • Sets, offsets, pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required., • Read install plans and identify starting locations, staging locations and changes., • Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved and supervises others doing the same. Completes all paperwork accurately and neatly and turns into operations daily. Customer Relations: • Maintain excellent customer service with the customers, transportation, warehouse, sales, and operation teams to establish solid relationships., • Must be punctual at all times. If an emergency arises, inform the supervisor and warehouse manager immediately, so that appropriate coverage can be arranged., • Must work cooperatively with members of the crew., • Must be courteous, helpful, and professional to all existing and potential customers both internal and external., • Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations., • Must follow all confidentiality rules regarding any products, services or documents that are visible at a customer’s move site., • Must follow all security rules for the company and assigned customers. Training: • Train Installer I and II employees under the direction of the supervisor. Safety: • Performs work with quality, efficiency, and safety at all times., • Must abide by all safety rules; to include proper safety equipment (PPE) (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law)., • Drives forklifts and bobtails if qualified safely (requiring everyone in cab to wear seatbelts, slow speeds, ensuring trucks are chalked and using proper plates, etc.)., • Report any unsafe dangerous requests from customers to senior management. Other duties: • Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement., • If also a qualified and approved driver, drives trucks up to and including Class A vehicles., • All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: • ORGANIZATION SKILLS – Organization and project planning skills with ability to juggle multiple assignments and tasks., • LANGUAGE SKILLS – Ability to read and interpret documents written in English such as procedures, work instructions, blueprints, and timesheets. Ability to effectively communicate with customers and coworkers., • MATHEMATICAL SKILLS – Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY – Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • OTHER DUTIES:, • Problem solving and strong decision-making skills., • Must be familiar with and able to train others using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, J bars, etc., etc., • Must be familiar with basic systems furniture nomenclature and be able to identify upon sight, the major lines of the three major manufactures: Steelcase, Herman Miller, and Haworth. Must also be able to identify the two major lines of Knoll product., • Must be familiar with project management reports such as Gantt and Pert charts and understand and interpret cut sheets., • Must be able to produce detailed inventories of all goods exposed to on O&I and install projects., • Must be able to accurately estimate medium sized move, install and or tech projects to determine manpower, trucks, and equipment necessary to complete the tasks required., • Must be able to lead small to medium sized installation projects without supervision., • Must own and bring to work every day, a complete set of Installer III level installation tools as defined in Corovan installation policy., • Must possess the knowledge and skills necessary to install whiteboards/glass boards, trouble shoot electrical issues within the panels, install TV Monitors of all sizes. Install Sit/Stand Arm Assemblies and height adjustable bases., • Must be able to adequately make custom cuts on worksurfaces including grommets. Must be able to correctly install wall-track and wall-starts. Must be able to adequately install cabinets and furniture to wall track according to safety protocols., • Must be able to produce red-line and stick drawings for the purpose of assembly or disassembly of systems furniture. Has an understanding of space planning fundamentals and building code., • Must be able to conduct a customer pre-move meeting, post destination signage and communicate all standard move and install protocol to the customers., • Must be familiar with laboratory moving including packing of lab equipment, fine tune and detail work, PC disconnect and reconnect and must possess good customer service skills., • Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage., • Must complete Mover I & II, and Installer I, II & III Level Corovan University training and pass the written tests. May also be required to Driver I or II classes if an approved and qualified driver. EDUCATION and/or EXPERIENCE: • High School Diploma and/or general education degree (GED); or three year’s related experience and/or training or equivalent combination of education and experience., • Valid California driver’s license may be required., • If driving on behalf of the company, a valid driving record that meets the company’s insurance carrier’s requirements., • Three (3) years of installation /moving experience required, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks and J bars., • May be required to obtain an asbestos training certification. PRIMARY LOCATION: Orange County. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. • Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., • Handling: Seizes, helps, or works with hands., • Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., • Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., • Standing: Remains in standing position if required to perform various functions of the job., • Stooping: Bends body downward and forward by bending at knees or waist., • Vision: Reads paperwork and records on the computer or hand-held devices., • Talking: Communications by phone, email, text and in person., • Sitting: May be required to sit at desk. May sit for long periods of time., • Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., • Heights: May include working at height on a loading dock up, lift-gate, or scissor lift. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. • Temp/Weather: Works in either 1) Office environment – for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside – may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., • Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: • Variable hours, non-exempt, regular position., • Employees might be required to work late evenings or weekends depending on the business needs., • All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description $21.75 - $24.52 / Hourly Please note that this position is subject to pre-employment drug testing and criminal background checks, which include 4-year employment verifications. SUMMARY: Reporting to the Transportation Manager, the Installer III Installs and de-installs modular furniture systems as directed by Supervisor. May be called upon to run small install and move projects. Lifts, carries and/or pushes and pulls furniture, equipment, and cartons on wheels to and from trucks, offices and warehouses as requested by the customer. Responsible to load and unload trucks from loading dock, using ramps or on lift-gates. May assist in setting & offsetting goods on equipment. Responsible to produce a quality install/move for the customer. Assists the install/move process by communicating with supervisors, the end users/customer, and other crewmembers. Uses extreme care not to damage goods or facilities during the install/move. This position is also responsible for reporting and escalating any related issues about the job, crew or customer to the Supervisor, Lead Foreman, Project Manager, or Account Manager. Typically obtains daily site work role assignments from the Supervisor, Lead Foreman, or Project Manager, however, has a dotted line to the Dispatcher, Operations Supervisor and directly reports to the Transportation Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Account Assignments: • Checks for start time (for next day’s work schedule) with dispatch daily., • Arrives at Corovan dispatch office (or on-site), in complete uniform every day., • Obtains daily work assignments from dispatch or operations manager., • Installs systems walls, splines, and componentry, handles, and stages product, performs detail work and trash-out functions on install projects., • Sets, offsets, pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required., • Read install plans and identify starting locations, staging locations and changes., • Properly loads and unloads trucks from loading dock, using ramps or on lift-gates to protect goods being moved and supervises others doing the same. Completes all paperwork accurately and neatly and turns into operations daily. Customer Relations: • Maintain excellent customer service with the customers, transportation, warehouse, sales, and operation teams to establish solid relationships., • Must be punctual at all times. If an emergency arises, inform the supervisor and warehouse manager immediately, so that appropriate coverage can be arranged., • Must work cooperatively with members of the crew., • Must be courteous, helpful, and professional to all existing and potential customers both internal and external., • Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations., • Must follow all confidentiality rules regarding any products, services or documents that are visible at a customer’s move site., • Must follow all security rules for the company and assigned customers. Training: • Train Installer I and II employees under the direction of the supervisor. Safety: • Performs work with quality, efficiency, and safety at all times., • Must abide by all safety rules; to include proper safety equipment (PPE) (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law)., • Drives forklifts and bobtails if qualified safely (requiring everyone in cab to wear seatbelts, slow speeds, ensuring trucks are chalked and using proper plates, etc.)., • Report any unsafe dangerous requests from customers to senior management. Other duties: • Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement., • If also a qualified and approved driver, drives trucks up to and including Class A vehicles., • All other duties as assigned based on business needs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: • ORGANIZATION SKILLS – Organization and project planning skills with ability to juggle multiple assignments and tasks., • LANGUAGE SKILLS – Ability to read and interpret documents written in English such as procedures, work instructions, blueprints, and timesheets. Ability to effectively communicate with customers and coworkers., • MATHEMATICAL SKILLS – Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY – Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • OTHER DUTIES:, • Problem solving and strong decision-making skills., • Must be familiar with and able to train others using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, J bars, etc., etc., • Must be familiar with basic systems furniture nomenclature and be able to identify upon sight, the major lines of the three major manufactures: Steelcase, Herman Miller, and Haworth. Must also be able to identify the two major lines of Knoll product., • Must be familiar with project management reports such as Gantt and Pert charts and understand and interpret cut sheets., • Must be able to produce detailed inventories of all goods exposed to on O&I and install projects., • Must be able to accurately estimate medium sized move, install and or tech projects to determine manpower, trucks, and equipment necessary to complete the tasks required., • Must be able to lead small to medium sized installation projects without supervision., • Must own and bring to work every day, a complete set of Installer III level installation tools as defined in Corovan installation policy., • Must possess the knowledge and skills necessary to install whiteboards/glass boards, trouble shoot electrical issues within the panels, install TV Monitors of all sizes. Install Sit/Stand Arm Assemblies and height adjustable bases., • Must be able to adequately make custom cuts on worksurfaces including grommets. Must be able to correctly install wall-track and wall-starts. Must be able to adequately install cabinets and furniture to wall track according to safety protocols., • Must be able to produce red-line and stick drawings for the purpose of assembly or disassembly of systems furniture. Has an understanding of space planning fundamentals and building code., • Must be able to conduct a customer pre-move meeting, post destination signage and communicate all standard move and install protocol to the customers., • Must be familiar with laboratory moving including packing of lab equipment, fine tune and detail work, PC disconnect and reconnect and must possess good customer service skills., • Must be familiar with the O&I (Office & Industrial) move process and understand the move labeling and directional signage., • Must complete Mover I & II, and Installer I, II & III Level Corovan University training and pass the written tests. May also be required to Driver I or II classes if an approved and qualified driver. EDUCATION and/or EXPERIENCE: • High School Diploma and/or general education degree (GED); or three year’s related experience and/or training or equivalent combination of education and experience., • Valid California driver’s license may be required., • If driving on behalf of the company, a valid driving record that meets the company’s insurance carrier’s requirements., • Three (3) years of installation /moving experience required, using various moving equipment and its proper usage such as dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks and J bars., • May be required to obtain an asbestos training certification. PRIMARY LOCATION: Orange County. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. • Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., • Handling: Seizes, helps, or works with hands., • Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., • Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., • Standing: Remains in standing position if required to perform various functions of the job., • Stooping: Bends body downward and forward by bending at knees or waist., • Vision: Reads paperwork and records on the computer or hand-held devices., • Talking: Communications by phone, email, text and in person., • Sitting: May be required to sit at desk. May sit for long periods of time., • Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., • Heights: May include working at height on a loading dock up, lift-gate, or scissor lift. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. • Temp/Weather: Works in either 1) Office environment – for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside – may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., • Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: • Variable hours, non-exempt, regular position., • Employees might be required to work late evenings or weekends depending on the business needs., • All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Grow the specialty pharmacies patient population by strictly adhering to Shields' programs and processes with enthusiasm and purpose. Document patient information within the hospital EMR, Therigy and all Shields proprietary tools as required. Skills: Strong interpersonal communication skills, except

SHIELDS' mission is to develop, deliver and evaluate culturally sensitive, comprehensive service models that empower and advocate for high-risk families in South Los Angeles.

Job Description $20.75 - $27.69 / Hourly Please note that this position is subject to pre-employment drug testing, physical and criminal background checks, which include 7-year employment verifications, and verifying Motor Vehicle Report is in compliance with insurance carrier requirements (Clean driving record with no DUI, reckless driving, major accidents, cell phone tickets or felony driving within the last 7 years). Reporting to the Operations Manager/Transportation Manager, the Driver I drives, loads, and unloads Class C (bobtail) vehicles during the course of O&I moves and related services. Lifts, carries and/or pushes furniture, equipment, and cartons on wheels or in hand to and from trucks, offices and warehouses as requested by the customer. Responsible to load and unload trucks from loading dock, using ramps or lift-gates. May assist in setting & offsetting goods on equipment. Responsible to produce a quality move for the customer. Assists the move process by communicating with supervisors, end users/customer and other crewmembers. This position is also responsible for reporting and escalating any related issues about the job to the Lead Foreman, Supervisor or Project Manager. Typically obtains daily site work role assignments from the Lead Foreman, Driver Foreman, Supervisor, Project Manager or Account Manager, however, has a dotted line to the Dispatcher, Operations Supervisor and directly reports to the Operations Manager/Transportation Manager. In addition, this position will use extreme care not to damage goods or facilities during the move, while adhering to all company processes and procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES: Driver: 1. Checks for start time (for next day’s work schedule) with dispatch daily., 2. Performs pre-trip check and safely drives vehicles up to and including Class C bobtails., 3. Sets, offsets, pushes, pulls, lifts, carries, and moves furniture, equipment and boxes as required., 4. Properly loads and unloads trucks from loading dock, using ramps or lift-gates, to protect goods being moved., 5. Completes assigned paperwork accurately and neatly and turns into dispatch daily., 6. Must be respectful of rules at each customer site as to where to work and adhere to meal and rest period locations., 7. Must follow all confidentiality rules with regards to any products or services that are visible at the move site. Safety: 1. Performs work with quality, efficiency, and safety at all times., 2. Must abide by all safety rules; to include proper safety gear (back braces, safety glasses, safety shoes, hard hats, masks and/or gloves, etc. as required by the customer or by law), drive forklifts safely (seatbelt, slow speeds, ensuring trucks are chalked, coned, and using proper plates, etc.)., 3. Ensures passengers wear seatbelts., 4. Report any unsafe dangerous requests from customers to senior management., 5. Report any accidents immediately in Driveroo VIR Software and by contacting dispatch immediately., 6. Responsible to ensure he/she never backs up the truck without a spotter helping to assist in the blind areas. Maintenance: • Assist Driver II with proactive maintenance of all equipment to ensure operational efficiency and safety compliance. Customer Relations: • Maintain excellent customer service with the customers, transportation, and warehouse teams to establish solid relationships., • Must be punctual at all times. If an emergency arises, inform the supervisor and warehouse manager immediately, so that appropriate coverage can be arranged., • Must work cooperatively with members of the crew., • Must be courteous, helpful, and professional to all existing and potential customers. Other duties: 1. Arrives at Corovan dispatch office (or on-site), in complete uniform every day., 2. Obtains daily work assignments from dispatch or supervisor and stays in work assignment until relieved., 3. Sign timesheets daily signifying your start, meal periods and end time daily, and other documentation is completed accurately and turned in by the time requirement., 4. Promote Corovan’s Mission and Vision Statements., 5. Continuously promotes compliance with company policies and procedures. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES: 1. ORGANIZATION SKILLS - Organization skills, attention to details, and the ability to prioritize in a changing environment., 2. LANGUAGE SKILLS - Ability to read and interpret documents written in English such as procedures, manuals, work orders, inventories, work instructions, and timesheets. Must be able to efficiently communicate with customers and coworkers. 1. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to formulate in square feet. Ability to read and correctly interpret the legend on installation drawings and read both standard and metric tape measures., 2. REASONING ABILITY - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., 3. LEADERSHIP - Strong interpersonal, training and leadership skills. Ability to motivate crew to accomplish objectives., 4. COMMUNICATION SKILLS – Ability to effectively communicate with potentially stressful and/or emotional situations. Ability to read and interpret documents written in English such as procedures, work instructions, and timesheets. Must effectively communicate well with customers and coworkers. OTHER DUTIES: • Able to work independently., • Comfortable working with customers as well as sales, accounting, warehouse, and other departments., • Must be familiar with various moving equipment and proper usage such as Class C bobtail trucks, pack vans, golf carts, and passenger vans, dollies, carts, pads, straps, pallet jacks, forklifts, ramps, lift gates, and all specialty equipment including but not limited to roll-a-lifts, Genie lifts safe jacks, J bars, etc., • Ability to handle and safeguard sensitive and confidential information required., • Ability to operate all forklift types - Able to move vaults, palletized product, and loose product onto or off of trucks, or within the warehouse when directed by a supervisor, • Must be able to read and correctly interpret current warehouse and transportation work orders and bills of lading., • Must have basic knowledge and understanding of company concepts, practices, and procedures and an understanding of safety and security protocols., • Must be able to use good judgement to complete work assignments., • Use of proper lifting techniques required., • Use of proper safety equipment required., • Must participate in the DMV Pull Notice Program and Random Drug Testing Program, • Must complete Mover I & II, and Driver I Level Corovan University training and pass the written tests. May also be required to pass Installer I, II, and III. EDUCATION and/or EXPERIENCE: 1. High School Diploma, GED, or equivalent required; or equivalent experience., 2. Two to three (2-3) years’ experience in a commercial office moving, or warehouse environment preferred., 3. One to two (1-2) years’ driver experience in a warehouse environment preferred., 4. Valid California Class C driver’s license is required., 5. Minimum age 21 to qualify for company vehicle insurance., 6. Valid driving record that meets the company’s insurance carrier’s requirements., 7. Preferred valid forklift certification, but not required., 8. Demonstration of experience providing leadership or guidance to other employees in a labor-oriented environment preferred. PRIMARY LOCATION: Orange County. Various job sites and customer locations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individuals are required to be able to sit or stand for long periods as needed throughout the day. 1. Walking: May require walking primarily on a level surface but may include walking on uneven or inclined surfaces for lengthy periods throughout the day, often up and down stairs., 2. Handling: Seizes, helps, or works with hands., 3. Lifting: Proper lifting techniques required. May include lifting up to 75 pounds and pushing or pulling up to 150 pounds throughout the day. Pushing or pulling assignment may need to be done with inclines. May also include climbing or descending stairs while carrying goods up to 50 pounds., 4. Reaching: Extends hands and arms in any direction, reaching above shoulder heights, below the waist or lifting as required., 5. Standing: Remains in standing position if required to perform various functions of the job., 6. Stooping: Bends body downward and forward by bending at knees or waist., 7. Vision: Reads paperwork and records on the computer., 8. Talking: Communications by phone, email, text and in person., 9. Sitting: May be required to sit at desk or in a truck. May sit for long periods of time., 10. Stairs: May also include climbing or descending stairs while carrying goods up to 50 pounds., 11. Heights: May include working at height on a loading dock up, or on a lift-gate. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The performance of this position may occasionally require exposure to the manufacturing, assembly, and construction areas and under certain conditions require the use of personal protective equipment such as safety shoes, safety glasses with side shields, hard hats, masks, gloves and/or hearing protection. This list is not all inclusive. 1. Temp/Weather: Works in either 1) Office environment - for the most part ambient room temperatures, lighting, and traditional office equipment, and 2) Warehouse – may be exposed to cold or hot temperatures, and 3) Outside - may be exposed to wet and/or humid conditions, outside weather conditions and hot or cold conditions., 2. Noise: Works in office, warehouse, during construction or outside environment, with constant or intermittent noise. POSITION TYPE/EXPECTED HOURS OF WORK: 1. Variable hours, regular position, part time non-exempt., 2. Employees might be required to work late evenings or weekends depending on the business needs., 3. All Overtime must be approved by manager after working. TRAVEL: This position requires travel around the local area, depending upon customer assignment. AAP/EEO STATEMENT: The Company provides equal employment opportunities to all employees and applicants for employment activities and prohibits discrimination and harassment of any type, based on their actual or perceived: race, religious creed, color, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status (including registered domestic partnership status), sex and gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity and gender expression (including transgender individuals who are transitioning, have transitioned, or are perceived to be transitioning to the gender with which they identify), age (40 and over), sexual orientation, Civil Air Patrol status, military and veteran status and any other consideration protected by federal, state or local law (collectively referred to as "protected characteristics"). OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. REASONABLE ACCOMMODATIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Title: Traveling Administrative Assistant FLSA: Non-Exempt Reports To: RCM Management Position Summary The Administrative Assistant performs a variety of general administrative/clerical tasks Key Responsibilities • Provide administrative support to the Practice Development and Training & Development departments, including scheduling, document preparation, and communication support., • Assist with project coordination by tracking deadlines, preparing updates, and maintaining organized documentation., • Generate and maintain reports using Excel and create professional documents in Word for department use., • Support virtual and in-person meetings through Teams and Outlook, including calendar management, meeting logistics, and follow-up communication., • Maintain a professional presence when interacting with leadership teams, ensuring clear and respectful communication., • Help organize training sessions, workshops, and departmental initiatives by managing materials and tracking attendance as needed., • Perform general office and administrative duties to ensure smooth department operations. Knowledge, skills, and abilities • Prior front office experience in the medical/dental industry preferred, • Strong MS Office experience (Excel and Word), • Previous experience with dental software (Eagle Soft, Dentrix, QSI, or similar), • Strong written and verbal communication skills, • Strong interpersonal and relationship skills, • Ability to maintain outgoing, friendly attitude with patients and coworkers, • Ability to work in a fast-paced environment and able to multitask, • Ability to work with minimal supervision Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to stand, sit, and walk; talk, hear, and smell; and use hands, fingers, and wrists (manual dexterity and hand-eye coordination) to handle or feel the mouth/teeth and gums of patients, as well as objects, tools, or controls associated with the dental field. The employee is frequently/occasionally required to reach; lift and/or move up to 25 pounds; and balance, stoop, bend, squat, kneel, crawl, climb, twist, pull, and crouch. The essential functions of this position will result in the following: hazardous exposure (chemical and infections)—constantly; non ionizing radiation (welding flash, microwaves, sun, etc.)—frequently; radiation (x-ray, radioactive, isotopes, etc.)—constantly; noise (loud/repetitive, 85 decibels per OSHA standard)—constantly; and personal protective equipment (PPE: respiratory masks, latex gloves, face shields, etc.)—constantly. Work Conditions and Risk General Dental Office conditions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The dental office environment may result in employees being exposed to toxic chemicals, radiation, infectious bodily fluids and materials, and increased noise level. This position assumes high risk. Limitations and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, skills, and physical demands required for the position. This job description is subject to possible modification to reasonably accommodate disabled individuals. Some requirements may exclude individuals who pose a direct threat or significant risk to health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by anyone occupying this position. Employees are required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with State and Federal laws. The job requirement represents the minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the employee must possess the abilities to perform each duty proficiently. Continued employment remains on an “at-will” basis.

SHIELDS' mission is to develop, deliver and evaluate culturally sensitive, comprehensive service models that empower and advocate for high-risk families in South Los Angeles.