Trabajos structural welder en Chula Vista, CaliforniaCrear alertas

Job Description We are seeking an experienced and driven Staff Mechanical Engineer who thrives in a fast-paced startup environment. You will take ownership of the end-to-end development of mission-critical mechanical and thermal systems, from blank-page concept through analysis, fabrication, and final testing. You will tackle extreme engineering challenges, including high-temperature systems with complex power electronic interfaces while mentoring junior engineers and driving projects across the finish line. Key Responsibilities • Lead the design, analysis, and manufacturing of complex mechanical and thermal hardware., • Architect and design systems from the ground up using SolidWorks, ensuring robust application of GD&T., • Conduct advanced structural (FEA) and thermal (COMSOL) analyses on systems operating in extreme environments (up to 1500°C)., • Design custom steel and aluminum weldments, overseeing their fabrication and quality., • Architect and implement data acquisition (DAQ) systems and instrumentation to validate prototype performance., • Act as a technical authority for DFM/DFA, frequently utilizing hands-on fabrication skills (welding, machining) to iterate rapidly., • Take full ownership of project life cycles, navigating the ambiguities of a startup environment to deliver hardware on tight timelines. Basic Qualifications • Bachelor's degree in mechanical engineering., • 5+ years of professional design and/or hands-on manufacturing experience., • Prior experience in a startup or highly dynamic engineering environment. Preferred Skills and Experience • Master's degree in mechanical engineering or other comparable engineering disciplines., • Experience working with contract manufacturers., • Understanding and proper application of GD&T., • Experience with CAD (SolidWorks)., • Experience performing finite element analysis (FEA)., • Experience performing thermal analysis (COMSOL)., • Experience with steel and/or aluminum weldment design and analysis., • Experience with high-temperature (up to 1500°C) system design and analysis., • Hands-on design, design for manufacturability (DFM), and fabrication experience., • Experience with common fabrication methods and tools (welder, router, mill, lathe, hand tools, etc.)., • Data acquisition and instrumentation experience (thermocouples, pressure sensors, electrical sensors, flow sensors, oxygen sensors, etc…)., • Demonstrated ability to drive projects to completion. Compensation Range The US base salary range for this full-time position is $186,000 to $206,900 + equity + benefits. Our salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including job-related skills, experience, location, and relevant education or training. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include equity or benefits.

Job Description WELDER: • The Welder operates safety equipment and uses safe work habits while performing his job function., • The Welder welds components in flat, vertical, or overhead positions., • The Welder ignites torches or starts power supplies and strikes arcs by touching electrodes to metals being welded, completing electrical circuits., • The Welder detects faulty operation of equipment or defective materials and notifies supervisors., • The Welder clamps, holds, tack-weld, heat-bend, grind or bolts component parts to obtain required configurations and positions for welding., • The Welder operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, and flux-cored arc, plasma arc, and shielded metal arc, resistance welding, and submerged arc welding., • The Welder monitors the fitting, burning, and welding processes to avoid overheating of parts of warping, shrinking, distortion, or expansion of materials., • The Welder examines work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications., • The Welder recognizes, set up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • The Welder will lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. SHIPFITTER: 1) Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within hull of ship for riveting or welding: Lays out position of parts on metal, working from blueprints or templates and using scribe and hand tools. 2) Locates and marks reference lines, such as center, buttock, and frame lines. 3) Positions parts in hull of ship, assisted by RIGGER. 4) Aligns parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls. 5) Marks location of holes to be drilled and installs temporary fasteners to hold part in place for welding or riveting. 6) Installs packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips. 7) May prepare molds and templates for fabrication of nonstandard parts. 8) May tack weld clips and brackets in place prior to permanent welding. 9) May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines. • Must have reliable transpiration, • Must pass a pre-employment physical and drug test, • Must have own tools -Must have 3-5 min years experience

Job Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds., • Read and understand blueprints and specifications. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location.

Job Description JOB DESCRIPTION SUMMARY/OBJECTIVE The Welder Journeyman Welds fabricated steel components to assemble structural forms in the assembly and production of Navy ship repair and other marine and commercial equipment. Welder Journeyman must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES • Operates fabrication shop and machine shop machinery and equipment., • Reads job specifications to determine machine adjustments and material requirements, • Setup welding equipment, • Fit and Tack parts together in preparation for welding, • Remove excess slag, • Perform precise fitting work on components, • Running lines and leads, • Blueprint & Weld symbols proficiency, • Fill out Job JSA forms as required KNOWLEDGE / SKILLS • Ability to weld in all positions, • Blueprint proficiency, • Ability to troubleshoot major welding equipment problems, • Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies, • Ability to use conventional and precision measuring instruments, • Pass Welder Workmanship Training (WWT), • Able to operate sawzall, 4” & 7” grinders, and various other tools, • Able to use Weld Gauges, • Ability to weld in uncomfortable positions where applicable, • Ability to work on beams, scaffolding, ladders and confined spaces. COMPETENCIES • Communication Proficiency, • Flexibility (Job duties & schedule), • Follow verbal/written instructions, • Able to work independently with no supervision, • Teamwork orientation REQUIRED EDUCATION AND EXPERIENCE • Must be certified Welder, • Must have a minimum of: Level 1: 1-2 years of ship repair experience and/or skill set. Level 2: 2-4 years of ship repair experience and/or skill set. Level 3: 5+ years of ship repair experience and/or skill set. Must be able to work in the US. PHYSICAL DEMANDS The Welder Journeyman must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative of the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Additional demands are listed below: • Able to climb ladders and work off scaffolding, • Able to lift, carry, or push up to 50 lbs. throughout the shift (including overtime) Work Location: In person Genesis Industrial Ventures is an Equal Opportunity Employer and is committed to creating an inclusive workplace where employees are valued and empowered to succeed. About Us: Genesis Industrial Ventures LLC is a San Diego-based staffing services company committed to delivering high-quality solutions to our clients across a range of complex projects. Our team is built on expertise, integrity, and a relentless drive to get the job done right. We foster a collaborative work culture where talented professionals are empowered to grow, contribute, and make a real impact.

Job DescriptionStructural Welders (Shipyard) – HawaiiCompany: Lead Marine Location: Hawaii Job Type: Full-Time / Contract (4-Month Assignment) Pay Rate: $35.00 / hourPer Diem: $170.00 / day (Paid 7 days a week) Work Schedule: 60 hours per week Job Summary Lead Marine has immediate openings for experienced Journeyman Structural Welders for a 4-month marine repair project in Hawaii. We are looking for hands-on, dependable tradespeople who can commit to a 60-hour work week for the full 4-month project duration. This job involves heavy-plate structural welding on steel ships following American Bureau of Shipping (ABS) quality standards. What You’ll Be Doing • Perform multi-pass Stick (SMAW) welding on heavy carbon steel plate in all positions (including vertical-up)., • Use 7018 low-hydrogen rods to make clean, structural groove and fillet welds., • Use heating torches for pre-heating steel prior to welding., • Run carbon arc gouging equipment for back-gouging and joint prep., • Prep, grind, and clean weld joints to pass visual inspections by ABS inspectors., • Read weld gauges to verify proper joint fit-up and fillet sizes., • Work safely onboard vessels, on staging/scaffolding, and in tight structural compartments. Job Requirements, • Experience: 5+ years of structural welding experience in a shipyard, ship repair, or Navy base setting., • Availability: Must be able to work 60 hours per week and complete the entire 4-month assignment without disruption., • Vision Check: Must be able to pass a standard J-1 vision exam., • Gear: Must bring your own welding hood, leathers, and standard trade hand tools., • Blueprint Reading: Ability to read structural shop drawings and standard weld symbols., • Security: Must be eligible for standard shipyard security badging and base access. Onsite Weld Test Details All welders will take a hands-on ABS qualification test when arriving on site:, • Process: Stick / SMAW (using 7018 rods)., • Test Plate: 1-inch thick steel plate with backing strip (passing this test qualifies you for unlimited thickness)., • Positions: All-position groove test (vertical-up)., • Gouging: Basic air carbon arc gouging demonstration. Pay & Benefits, • Hourly Pay: $35.00 / hour, • Per Diem: $170.00 / day (Paid 7 days a week for eligible traveling welders), • Weekly Hours: 60 hours / week (20 hours of OT weekly), • Benefits: Health insurance, paid holidays, and paid sick leave available. Benefits:, • Health insurance, • Paid holidays, • Paid sick leave The benefits listed above are subject to eligibility requirements To see a list of more available jobs, please visit www.leadstaff.com/jobs/ About LEAD Staffing Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. \nCompany Description “At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.” “At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 1. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 2. Must possess a working knowledge of welding equipment and work processes used in marine welding., 3. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 4. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 5. Must understand the US customary and metric measurement system., 6. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionStructural Welders (Shipyard) – HawaiiCompany: Lead Marine Location: Hawaii Job Type: Full-Time / Contract (4-Month Assignment) Pay Rate: $35.00 / hourPer Diem: $170.00 / day (Paid 7 days a week) Work Schedule: 60 hours per week Job Summary Lead Marine has immediate openings for experienced Journeyman Structural Welders for a 4-month marine repair project in Hawaii. We are looking for hands-on, dependable tradespeople who can commit to a 60-hour work week for the full 4-month project duration. This job involves heavy-plate structural welding on steel ships following American Bureau of Shipping (ABS) quality standards. What You’ll Be Doing • Perform multi-pass Stick (SMAW) welding on heavy carbon steel plate in all positions (including vertical-up)., • Use 7018 low-hydrogen rods to make clean, structural groove and fillet welds., • Use heating torches for pre-heating steel prior to welding., • Run carbon arc gouging equipment for back-gouging and joint prep., • Prep, grind, and clean weld joints to pass visual inspections by ABS inspectors., • Read weld gauges to verify proper joint fit-up and fillet sizes., • Work safely onboard vessels, on staging/scaffolding, and in tight structural compartments. Job Requirements, • Experience: 5+ years of structural welding experience in a shipyard, ship repair, or Navy base setting., • Availability: Must be able to work 60 hours per week and complete the entire 4-month assignment without disruption., • Vision Check: Must be able to pass a standard J-1 vision exam., • Gear: Must bring your own welding hood, leathers, and standard trade hand tools., • Blueprint Reading: Ability to read structural shop drawings and standard weld symbols., • Security: Must be eligible for standard shipyard security badging and base access. Onsite Weld Test Details All welders will take a hands-on ABS qualification test when arriving on site:, • Process: Stick / SMAW (using 7018 rods)., • Test Plate: 1-inch thick steel plate with backing strip (passing this test qualifies you for unlimited thickness)., • Positions: All-position groove test (vertical-up)., • Gouging: Basic air carbon arc gouging demonstration. Pay & Benefits, • Hourly Pay: $35.00 / hour, • Per Diem: $170.00 / day (Paid 7 days a week for eligible traveling welders), • Weekly Hours: 60 hours / week (20 hours of OT weekly), • Benefits: Health insurance, paid holidays, and paid sick leave available. Benefits:, • Health insurance, • Paid holidays, • Paid sick leave The benefits listed above are subject to eligibility requirements To see a list of more available jobs, please visit www.leadstaff.com/jobs/ About LEAD Staffing Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law.

Job Description #jobalert | DIRECT PLACEMENT | FABRICATOR WELDER | San Diego, CA A long-standing, stable metal fabrication company is hiring an experienced Fabricator Welder to join a growing shop that supports U.S. Navy ship and submarine modernization work, along with commercial fabrication projects. This opening is for someone who can take ownership of a project from raw material to finished part with minimal oversight. The shop is busy, growing, and looking for someone ready to become a key player on a small, tight-knit team. This role offers steady, full-time work, a strong pay range for the region, and a real path to become one of the most trusted fabricators in the shop. • Anticipated $29–$40 hourly, based on experience, • Full suite of benefits: Medical/Dental/Vision, Life Insurance, 401(k) with match, PTO, EAP, • Full-time, Monday–Friday, 8-hour shift Overview: • Fabricate and weld metal components (steel, stainless steel, aluminum) used to upgrade U.S. Navy ships and submarines, from small brackets to large equipment foundations, • Take a project from raw material through cutting, forming, fit-up, and final weld, completing the majority of each job independently, • Read shop drawings and blueprints to build parts to spec without step-by-step direction, • Operate manual and semi-automated fabrication equipment: press brake, shear, lathe, mill, saws, and welding stations, • Shift between weld processes and project scope as work moves from job to job, sometimes more than once in a day, • Contribute to commercial fabrication projects alongside defense-related work Preferred Skills/Experience: • High school diploma or equivalent, • Welding certification(s) preferred; must be able to pass a U.S. government background check, • Valid driver's license and clean driving record, • 5–7+ years of hands-on metal fabrication experience — not welding alone, • Proven ability to complete a project start-to-finish: cutting, forming, fit-up, and final weld, • Working knowledge of MIG, flux core, and stick welding; TIG welding experience strongly preferred, • Experience fabricating with steel, stainless steel, and aluminum (thin and thick gauge), • Ability to lift up to 70 lbs and work in an open-air shop environment (seasonal heat/cold), • Ability to work independently while following established shop processes Keywords: metal fabrication, fabricator, welder, TIG welding, MIG welding, flux core welding, stick welding, stainless steel fabrication, aluminum fabrication, sheet metal fabrication, blueprint reading, shop drawings, press brake, shear, structural fabrication, Navy shipyard, submarine fabrication, defense manufacturing, fit-up, fabrication technician, precision metal fabrication, welding certification, quality fabrication, custom metal fabrication EEO

Epsilon Systems Solutions Inc. has a current opening for a full-time NDT Inspector Level III in National City, CA.\n \n \nSummary: Prepares Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Administers the Welder, Brazer and NDT training and qualification programs for California and Hawaii locations. Subject Matter Expert (SME) in Welding, Brazing and Non-Destructive Testing associated with service craft, boat, surface ship, and aircraft carrier repair and modernization.\n \n \nDuties and Responsibilities:\n \n\n • Reports to QA Director for all assignments and supervision\n, • Administers/oversees the Welder, Brazer and NDT training, qualification and maintenance program\n, • Responsible for management of the Welding/Brazing/NDT Programs through subordinate supervisors/managers.\n, • Oversees and approves quality standards for structural and pipe material and equipment receiving, in-process and final inspection in accordance with company and contractual requirements.\n, • Reviews work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements for welding, brazing and NDT.\n, • Performs in-process work surveillances and conducts final work-package review after work-completion for welding, brazing and NDT.\n, • Performs internal surveillances/audits of weld, braze and NDT inspections to monitor compliance with company procedures and performs external audits to evaluate supplier suitability for use and compliance during execution of work.\n, • Reviews status of in-process rejections and recommends appropriate corrective action.\n, • Acts as a primary liaison with customers, vendors and various company departments for Welding/Brazing/NDT Program support.\n, • Advises management of test trends, returns, vendor performance and audit results and corrective action needed.\n, • Responsible for the training, motivation and discipline of assigned employees (when required).\n\n\n, • Administers qualification exams for Welders, Brazers and NDT Programs.\n, • Develops quality and Workmanship standards for Welders, Brazers and NDT personnel.\n, • Monitors compliance with company Quality Management System, Workmanship standards and Customer requirements.\n, • Develops quality control and inspection procedures for inclusion in production Work-Packages and QA Work Books.\n, • Defines test standards and specifies test equipment and procedures.\n, • Reviews Technical Specifications and contract requirements to advise Bid Team of Welding, Brazing and NDT requirements to help evaluate company capabilities and support the Bid review.\n, • Reviews Technical Specifications and contract requirements during Work Package and QA Work Book development to provide guidance for Welding, Brazing and NDT technical requirements, PCP development and qualification needs.\n, • Reviews Test and Inspection Plans (TIP) for structural/piping test and inspection requirements prior to release to production.\n, • Reviews completed weld, brazing and NDT objective quality evidence (OQE) for accuracy and completeness prior to certification.\n, • Provides Production technical guidance during accomplishment of projects.\n, • Conducts Quality Assurance inspections, Audit and Surveillances for the Welding/Brazing and NDT Programs.\n, • Works with customer QA representatives to coordinate inspection and acceptance activities.\n, • Reviews QA control requirements with customer representative to assure compliance with requirements.\n\n\n, • Reviews contractually required documentation for accuracy and completeness.\n\n \nRequirements:\n \n\n • High school diploma or GED.\n, • Prior NDT Level III Examiner Certification IAW NAVSEA T9074-AS-GIB-010-271 for NDT-VT, PT, and MT Methods\n, • 5 years waterfront Weld/Braze/NDT Program Management for NAVSEA contracts.\n, • Ability to read, write, speak, and comprehend English.\n, • Able to obtain and maintain access to military and government installations and private shipyards.\n\n \nPreferred Qualifications:\n \n\n • Weld/Structural Engineer Degree or equivalent\n\n\n, • Prior NDT Level III Examiner Certification IAW NAVSEA T9074-AS-GIB-010-271 for NDT-UT.\n, • Previous experience with administration of AWS, ASME and ABS programs\n, • NBPI or NACE Level I or higher inspector certification\n, • 5 years waterfront Weld/Braze/NDT Program Management for Commercial contracts.\n\n \n Pay Range \n \n \nThe pay range for this is $89,000 to $ 130,000 annually. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to business considerations, local market conditions, and internal equity, as well as candidate qualifications such as skills, education and experience.\n \n \nADA Notations:\n \n\n • Frequent standing, sitting, walking, handling, feeling with hands, reaching with arms.\n, • Prolonged sitting and use of computer, (typing, keyboarding)\n, • Regular communication (hearing/speaking).\n, • Occasional stooping, kneeling, and crouching.\n, • Occasional lifting up to 20+ pounds.\n, • See details at close range (within a few feet of the observer).\n, • Noise conditions range from very quiet to noise levels above 85db.\n\n \nEpsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 1. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 2. Must possess a working knowledge of welding equipment and work processes used in marine welding., 3. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 4. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 5. Must understand the US customary and metric measurement system., 6. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description About Tempo Based in San Diego, California, Tempo develops thermochemical energy storage (TCES) systems designed for energy-intensive industries. The platform enables industrial operators to shift energy use over time by sourcing power when it is most cost-effective and enables the electrification of high-temperature industrial heat at a cost advantage to using fossil fuels. By storing electricity thermochemically, the system delivers a continuous stream of combustion-free, high-temperature air at up to 1,200°ree;C. Tempo is backed by leading climate and energy investors, including Breakthrough Energy Ventures, Khosla Ventures, and Prelude Ventures. For more information, visit www.tempoenergy.com. Job Description We are seeking an experienced and driven Staff Mechanical Engineer who thrives in a fast-paced startup environment. You will take ownership of the end-to-end development of mission-critical mechanical and thermal systems, from blank-page concept through analysis, fabrication, and final testing. You will tackle extreme engineering challenges, including high-temperature systems with complex power electronic interfaces —while mentoring junior engineers and driving projects across the finish line. Key Responsibilities • Lead the design, analysis, and manufacturing of complex mechanical and thermal hardware., • Architect and design systems from the ground up using SolidWorks, ensuring robust application of GD&T., • Conduct advanced structural (FEA) and thermal (COMSOL) analyses on systems operating in extreme environments (up to 1500°ree;C)., • Design custom steel and aluminum weldments, overseeing their fabrication and quality., • Architect and implement data acquisition (DAQ) systems and instrumentation to validate prototype performance., • Act as a technical authority for DFM/DFA, frequently utilizing hands-on fabrication skills (welding, machining) to iterate rapidly., • Take full ownership of project life cycles, navigating the ambiguities of a startup environment to deliver hardware on tight timelines. Basic Qualifications • Bachelor's degree in mechanical engineering., • 5+ years of professional design and/or hands-on manufacturing experience., • Prior experience in a startup or highly dynamic engineering environment. Preferred Skills and Experience • Master's degree in mechanical engineering or other comparable engineering disciplines., • Experience working with contract manufacturers., • Understanding and proper application of GD&T., • Experience with CAD (SolidWorks)., • Experience performing finite element analysis (FEA)., • Experience performing thermal analysis (COMSOL)., • Experience with steel and/or aluminum weldment design and analysis., • Experience with high-temperature (up to 1500°ree;C) system design and analysis., • Hands-on design, design for manufacturability (DFM), and fabrication experience., • Experience with common fabrication methods and tools (welder, router, mill, lathe, hand tools, etc.)., • Data acquisition and instrumentation experience (thermocouples, pressure sensors, electrical sensors, flow sensors, oxygen sensors, etc…)., • Demonstrated ability to drive projects to completion. Compensation Range The US base salary range for this full-time position is $186,000 to $206,900 + equity + benefits. Our salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including job-related skills, experience, location, and relevant education or training. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include equity or benefits. Physical Demands • Sitting and standing: Extended periods at a desk performing computer-based design, simulation, and documentation work, balanced with time at a lab bench or in the shop during hardware build and testing, • Lifting and carrying : Lift and carry equipment, test fixtures, or hardware assemblies up to 50 lbs.; heavier items handled with mechanical assistance or team lift, • Hand dexterity: Frequent use of hands for assembly, fabrication, instrumentation hookup, and operation of test and shop equipment, • Visual acuity: Ability to read engineering drawings, inspect hardware, and identify dimensional and surface quality features during fabrication and testing, • PPE compliance: Ability to wear and work effectively in required personal protective equipment, including safety glasses, heat-resistant gloves, safety shoes, and other appropriate gear in high-temperature lab and shop environments, • Safety acumen: Demonstrated understanding of lab and shop safety protocols, including hazard recognition and risk mitigation in environments involving high-temperature equipment, energized systems, and fabrication machinery, • Travel: Occasional travel (estimated <5%) for tool or material pickup Working at Tempo Tempo is a lean organization working on exciting challenges, and the people who thrive here share a few things in common beyond their technical skills. • Clear, direct communication: You professionally say what you mean, lead with empathy, use tact, ask when you're unsure, and keep the people around you informed without being asked. At a company our size, communication gaps are expensive, and good communicators add to success and efficiency!, • Low-ego helpfulness: You're willing to jump in on work that isn't strictly yours, whether that's helping a teammate debug something, lending a hand in the shop, or flagging an issue you noticed outside your lane. No one here succeeds in a silo., • Intellectual curiosity: You're genuinely interested in how things work, not just your piece of it, but the broader system. Tempo sits at the intersection of chemistry, mechanical engineering, power electronics, and software; the more you understand about the whole, the more valuable you become., • Business awareness: You understand that your work exists in a business context. You think about cost, timeline, and tradeoffs—not just technical elegance—and you make decisions accordingly., • Comfort with ambiguity: Processes here are still being built. You can make progress without a perfect playbook, and you know when to ask for direction versus when to use your judgment and move forward., • Accountability: You own your outcomes, including the misses. When something goes sideways, the instinct here is to fix it and learn from it, not to explain why it wasn't your fault. This job description is intended to provide a general overview of the position and is not an exhaustive list of duties, responsibilities, or qualifications. Tempo reserves the right to modify, add, or remove responsibilities as business needs evolve. Employees may be asked to perform duties outside of those listed above from time to time. Tempo is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable law. We are committed to building a diverse and inclusive team and encourage candidates from all backgrounds to apply. Tempo participates in E-Verify. Employment is contingent upon successful completion of a background check including employment and education check. California Privacy Notice (CCPA) - In connection with your application, Tempo collects personal information that you voluntarily provide, such as your name, contact information, employment history, and other information relevant to your candidacy. This information is collected and used solely for the purpose of evaluating your application and administering the hiring process. Tempo does not sell applicants' personal information. For more information about your rights under the California Consumer Privacy Act (CCPA), please contact HR. Tempo does not accept unsolicited resumes or candidate profiles from external recruiters, staffing agencies, or third-party search firms. Submission of unsolicited resumes by any external agency — whether to a Tempo employee, hiring manager, or any other representative — does not constitute or imply an agreement for placement fees, and Tempo will not be responsible for any fees related to unsolicited submissions under any circumstances. Any candidate submitted without a prior, fully executed, written fee agreement between the agency and Tempo's Human Resources department will be deemed the sole property of Tempo. Tempo reserves the right to pursue and hire such candidates without obligation to the submitting agency.

Job DescriptionJOB DESCRIPTION SUMMARY/OBJECTIVE The Shipfitter Journeyman fits & tack welds fabricated steel components to assemble structural forms in the assembly and production of Navy ship repair and other marine and commercial equipment. Shipfitter Journeyman must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES • Operates fabrication shop and machine shop machinery and equipment, • Reads job specifications to determine machine adjustments and material requirements, • Setup welding equipment, • Fit and Tack parts together in preparation for welding, • Remove excess slag, • Perform precise fitting work on components, • Decipher Blueprint and interpret weld symbols, • Running lines and leads KNOWLEDGE / SKILLS • Must be certified in Welding, • Blueprint proficiency, • Familiar with Mil-STD-22D, • Ability to troubleshoot major welding equipment problems, • Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies, • Pass Welder Workmanship Training (WWT), • Able to operate sawzall, 4” & 7” grinders, and various other tools, • Oxy-Acy torch cutting COMPETENCIES • Communication Proficiency, • Flexibility (Job duties & schedule), • Follow verbal/written instructions, • Able to work independently with no supervision, • Teamwork oriented REQUIRED EDUCATION AND EXPERIENCE Must have a minimum of: • Level 1: 1-2 years of ship repair experience and/or skill set., • Level 2: 2-4 years of ship repair experience and/or skill set., • Level 3: 5+ years of ship repair experience and/or skill set., • Must be able to work in the US., • Must possess basic skills (reading, writing and mathematical skills). PHYSICAL DEMANDS The Shipfitter Journeyman must be able to meet and successfully perform the essential functions of this job. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Additional demands are listed below: • Able to climb ladders and work off scaffolding, • Able to lift, carry, or push up to 50 lbs. throughout the shift (including overtime)Genesis Industrial Ventures is an Equal Opportunity Employer and is committed to creating an inclusive workplace where employees are valued and empowered to succeed. About Us: Genesis Industrial Ventures LLC is a San Diego-based staffing services company committed to delivering high-quality solutions to our clients across a range of complex projects. Our team is built on expertise, integrity, and a relentless drive to get the job done right. We foster a collaborative work culture where talented professionals are empowered to grow, contribute, and make a real impact.

Van Build Technician / Fabricator.We are seeking a skilled and versatile.Van Build Technician / Fabricator.This hands-on role will be responsible for the fabrication, installation, and finishing of a variety of systems and components throughout each build.The ideal candidate has experience working w

The Assembler will prepare and perform routine electronic and mechanical assembly operations.In addition, the Assembler will assemble and.Observes all safety regulations including personal protective equipment.Assemble components to a final configured product utilizing process instructions,.Reads an

Performs a variety of operations to.Works with assembly prints, wiring diagrams and schematics to assemble drawers, chassis, enclosures and racks.Works on assignments that are complex in nature where judgment and initiative are required in resolving problems and making recommendations.Determines and

Position: Mechanical Assembler (Semiconductor).Performs a variety of operations to assemble mechanical components, sub-assemblies, and sheet metal enclosures (drawers, chassis, racks) using blueprints and schematics.Assemble chassis, enclosures, and racks from wiring diagrams.Perform hand soldering,

Performs a variety of operations to assemble mechanical components, sub-assemblies and sheet metal enclosures.Works with assembly prints, wiring diagrams and schematics to assemble drawers, chassis, enclosures and racks.Works on assignments that are complex in nature where judgment and initiative ar

US-CA-SAN DIEGO-SD1 8650 Balboa Ave SAN ANTONIO BLDG.Person, or Immigration Status Requirements:.At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression.We bring the strength of more than 100

US Department of Defense - Naval Air Station North Island - Responsibilities: Fabricate and lay up composite material to form composite skin panels or repairs parts to dimensions and stacking order specified by technical directives; Determine tooling requirements for fabrication of new assemblies as

Van Build Technician / Fabricator.Do not pass up this chance, apply quickly if your experience and skills match what is in the following description.We are seeking a skilled and versatile.Van Build Technician / Fabricator.This hands-on role will be responsible for the fabrication, installation, and

Please make sure you read the following details carefully before making any applications.Performs a variety of operations to assemble mechanical components, sub-assemblies and sheet metal enclosures.Works with assembly prints, wiring diagrams and schematics to assemble drawers, chassis, enclosures a

Business Unit: DRS Daylight Solutions.DRS Daylight Solutions business provides industry-changing mid-infrared laser light technology for government and commercial markets, including: defense and security; life sciences; and industrial process control.As a mid-IR technology pioneer, Daylight Solution

Your Work Shapes the World at Caterpillar Inc.When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other.We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities.We don't jus

Position: Mechanical Assembler (Semiconductor).Is this the role you are looking for If so read on for more details, and make sure to apply today.Performs a variety of operations to assemble mechanical components, sub-assemblies, and sheet metal enclosures (drawers, chassis, racks) using blueprints a

HireTalent - - Responsibilities: Follows SOPs to perform wiring, component installation, cable harnessing, fitting of assembly instruments, etc.Inspects and verifies quality per specifications and regulatory requirements (FDA/ISO); Troubleshoots and resolves production issues; Documents and records

Aerotek - - Responsibilities: Solder and assemble cable and wire harness assemblies; Perform cable and connector soldering using automated methods; Read work orders and production documents; Labeling, wire cutting, crimping, harnessing, and box builds; Create wire lists and support kit assembly.

Van Build Technician / Fabricator.Do not pass up this chance, apply quickly if your experience and skills match what is in the following description.We are seeking a skilled and versatile.Van Build Technician / Fabricator.This hands-on role will be responsible for the fabrication, installation, and

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Job Summary / Welder Journeyman:. Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision.

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Using welding/cutting equipment and various power and hand tools, the welder performs a va

You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Job Summary / Welder Journeyman:. Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision.

Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies.

This position is located in the Structural Shop (Shop 26). You will serve as an Expert Welder leading a group to ensure work assignments are completed.

We specialize in designing and delivering precision AC and DC programmable power supplies, electronic loads, power subsystems, and compliance test solutions.If you're ready to work at the forefront of differentiated power technologies, this is your opportunity to make an impact in a fast-paced, high