Trabajos welder en Chula Vista, CaliforniaCrear alertas

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. Experienced welders who are able to perform open root welding. Nature and Scope \n • An employee in this position must be able to work with their peers as well as individually, and follow directions from team leads, supervisors, and managers. They must follow work instructions and processes, weld according to part drawings, execute tasks, and assist peers and lower level welders while remaining productive and highly efficient. These employees are also expected to be able to work without official drawings, using their expertise to fulfill needs of a customer.\n, • They must have the ability to work on the highest level of complexity parts. They will regularly provide direction, feedback, and instruction to other welders. They must have the ability to take guidance, feedback, and priority from Team Leads, Inspector, Welding Engineer, supervisor, or respective manager to continually improve performance, productivity and/or quality of completed product.\n, • Employees in this position are expected to have impeccable quality with practically none of their products subject to required reworking or rejection. These employees will work with a wide range of materials, operate an array of equipment, and can handle unique challenges. It is expected they can meet tight tolerance requirements on parts demanding higher than usual precision. Must have ability to work in multiple areas of the shop and carry multiple certifications.\n, • Employees in this role must pass and maintain required welding qualification tests. They must be fully able to read, comply and understand welding procedures, and must be able to climb and work from ladders, scissor/man lifts, and scaffolds.\n\n Equipment that may need to be set up and operated to complete duties: \n • Welding equipment for GTAW, GMAW, GMAW-P, and FCAW\n, • Fabrication equipment such as a saw, grinder, plasma cutter, and drill press\n, • Turntable or Rotary Welding Positioner\n, • Measurement tools and gauges for checking work\n, • Crane, or transporter for moving materials, tools, and equipment\n, • Computer for completing work orders, recording work hours, and online training\n, • Welding equipment and software for semi- automated or automated machines\n, • Other equipment that may be necessary for completion of work\n\n Principal Accountabilities \n • Comply with all of Solar's Environmental, Health and Safety Programs, Regulations and Guidelines, Policies, procedures, and best practices; use proper PPE, proper tools, etc\n, • Weld per ASME B31.3 standards and comply with PED standards as specified\n, • Weld per AWS D1.1 as needed\n, • Comply with Solar Turbines standards for pressure vessels and structural elements\n, • Perform pipe fitting without assistance unless unsafe to do so\n, • Clean welds including the cutting and repairing of unacceptable welds\n, • Check own work for conformance to welding procedure and specifications\n, • Check work of lower-level fabricators, providing feedback and suggestions when necessary\n, • Ensure that the welding procedures have been followed and quality has not been compromised\n, • Prepare material of own job when necessary\n, • Have work regularly inspected via Radiography (X-Ray) Inspection\n, • Provide welding/ fabrication support to other departments as needed (i.e., mock-up, rework, stud shooting, etc.)\n, • Use of Manufacturing Execution System to view drawings, read and follow work instructions, and record work order hours\n, • Participate in Lean Continuous Improvement projects and trainings on safety, quality, velocity, and cost\n, • Meet or exceed individual and team performance metrics for quality and on time delivery\n\n Qualifications \n • Must be able to recognize and avoid hazards and unsafe operation of equipment\n, • Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation\n, • Must be able to certify on pipe 6G position\n, • Must be able to certify on specified welding methods\n, • Proficient in welding with Duplex Material\n, • High School Diploma, GED, or equivalent required\n, • Annual eye exam required\n, • Annual hearing conservation exam required\n, • Successful completion of a welding hands-on assessment is required to qualify for an interview.\n\n Summary Pay Range: $32.52- $48.78 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n \n • Tuition Reimbursement\n, • Sign on Bonus\n\n, • These benefits also apply to part-time employees Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at . Posting Dates: March 25, 2026 - April 8, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n Education and Experience: \n • High School Diploma or GED\n, • A minimum of five to six years of applicable welding experience\n, • ASNT NDT Level III Certification or relevant experiencepreferred.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value \n Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation \n Job Summary / Welder Journeyman: \n Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. \n Job Requirements and Experience: \n\n • Must be 18 years of age or older to apply.\n, • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) \n, • Paid Time Off\n, • Company paid holidays\n, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) \n \n Welder Journeyman \n EEO/AA/Vet/Disabled

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value \n Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation \n Job Summary / Welder Journeyman: \n Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. \n Job Requirements and Experience: \n\n • Must be 18 years of age or older to apply.\n, • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) \n, • Paid Time Off\n, • Company paid holidays\n, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) \n \n Welder Journeyman \n EEO/AA/Vet/Disabled

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value \n Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation \n Job Summary / Welder Journeyman: \n Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. \n Job Requirements and Experience: \n\n • Must be 18 years of age or older to apply.\n, • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) \n, • Paid Time Off\n, • Company paid holidays\n, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) \n \n Welder Journeyman \n EEO/AA/Vet/Disabled

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification preferred.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification preferred.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Epsilon Systems Solutions, Inc. has opportunities available for full time Hull Welder Repair/Fabrication Technician I in San Diego, CA. \n Summary: The Hull Welder Repair/Fabrication Technician will repair hull damage to rails, hull structure, cabin tops and any other metal areas in accordance with OEM technical specifications in CONUS & OCONUS locations, as required. \n Roles and Responsibilities: \n • Perform hull Intermediate level maintenance and emergent repairs onboard assigned/designated heavy equipment and boats listed on the Equipment List to determine project scope repairs and necessary replacements. \n\n • Perform MIG/TIG welding service in accordance with Naval Ships.\n, • Perform service in accordance with NAVSEA T0300-AU-SPN-010 Fabrication Welding and Inspection of Small Boats and Craft Aluminum Hulls.\n, • High school diploma or equivalent\n, • Minimum of 3 years of experience repairing and troubleshooting hull damage to rails, hull, structure, cabin tops and any other metal areas relating to heavy equipment and boats.\n\n\n, • Possess moderate understanding of technical requirements.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Ability to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n\n\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n \n \n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems Solutions, Inc. has opportunities available for full time Hull Welder Repair/Fabrication Technician I in San Diego, CA. \n Summary: The Hull Welder Repair/Fabrication Technician will repair hull damage to rails, hull structure, cabin tops and any other metal areas in accordance with OEM technical specifications in CONUS & OCONUS locations, as required. \n Roles and Responsibilities: \n • Perform hull Intermediate level maintenance and emergent repairs onboard assigned/designated heavy equipment and boats listed on the Equipment List to determine project scope repairs and necessary replacements. \n\n • Perform MIG/TIG welding service in accordance with Naval Ships.\n, • Perform service in accordance with NAVSEA T0300-AU-SPN-010 Fabrication Welding and Inspection of Small Boats and Craft Aluminum Hulls.\n, • High school diploma or equivalent\n, • Minimum of 3 years of experience repairing and troubleshooting hull damage to rails, hull, structure, cabin tops and any other metal areas relating to heavy equipment and boats.\n\n\n, • Possess moderate understanding of technical requirements.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Ability to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n\n\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n \n \n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States, is a rapidly growing San Diego-based corporation specializing in manufacturing, welding, fabrication, machinery repair, and customized training under private and U.S. Government contracts. VetPowered employs a highly trained workforce utilizing advanced CNC equipment. The company is focused on strengthening and supporting advanced manufacturing in the United States. Key Job Functions: At VetPowered, the Welder Fabricator is responsible for performing welding and metal fabrication work in support of shop operations and custom projects. This role requires strong technical skills, attention to detail, and the ability to work both independently and as part of a team. Work includes building, repairing, and modifying metal components and equipment based on drawings, samples, or direction. The position supports a mission-driven organization that values precision, professionalism, and service to the veteran community. Essential Duties and Responsibilities:• Perform certified welding and fabrication work to industry standards; a current, verifiable welding certification is required (not entry-level or hobby experience) • Measure, cut, fit, form, and shape metal components safely and accurately, • Perform TIG, MIG, and Stick welding on mild steel, stainless steel, aluminum, and specialty alloys including Inconel and Monel, • Build and repair welded structures, components, and equipment from drawings, samples, or direction, • Fabricate carts, pallets, trailers, bumpers, and custom metal projects using a range of materials and structural shapes, • Operate fabrication equipment including band saws, cold saws (manual, semi-automatic, and automatic), mills, shears, hydraulic brakes, plasma cutters, and related tools, • Utilize CNC equipment such as CNC shears, CNC press brakes, tube notchers, abrasive notchers, and other metalworking machinery as required, • Support and guide others as needed to ensure work is completed safely, accurately, and on schedule, • Load and unload equipment and materials safely onto vehicles and trailers; assist with pickup and delivery of materials as needed, • Operate a forklift safely or obtain forklift certification within a reasonable timeframe, • Work effectively across multiple projects while maintaining quality and attention to detail, • Communicate clearly and professionally with team members and leadership; identify issues and provide practical solutions, • Follow all company, state, and federal safety policies and procedures • Valid driver’s license with reliable transportation to and from the worksite\n, • Current or previous MIG and TIG welding certifications; must be able to requalify or certify within two (2) weeks of hire\n, • Successful completion of an entrance welding examination in MIG, TIG, and Stick welding on mild steel, aluminum, and stainless steel, including fabrication of a test piece\n, • Strong communication skills; experience with prototype development or jig design is a plus\n, • Eligibility to obtain a DBIDS Clearance, including the ability to meet background requirements\n, • Compliance with all applicable company, state, and federal safety regulations\n, • U.S. Citizenship or Permanent Resident Status required\n\n Mission and Values: Contribute to achievement of the Mission and Vision of our organization by being: \n\n • \nAttention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small.\n, • \nAll In-Brings their whole self to work and giving it their all no matter how difficult the job or situation.\n, • \nAccountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses.\n, • \nAdaptable- Easily adjusts to changing circumstances.\n, • \nAlways Improving- A constant, ongoing effort to improve something. This 'something' can be a product, a service, one's skill set, or a team's way of working.\n\n Important Notes Position Details: This is a full-time hourly (non-exempt) position (40+ hours/week). Overtime applies based on workload and production needs. Pay: The range of pay for this California-based position is $38.00 - 43.00 per hour. Incentive Compensation: Potential for bonus or incentive compensation after one full year of employment. The actual compensation offer will carefully consider a wide range of factors including skills, qualifications, experience, and location. If your experience differs from what is listed but you believe you can add value to VetPowered, you are encouraged to apply. Schedule: This position is Monday-Friday, 7:00am-3:30pm. Occasional weekends or schedule adjustments may be required to support Company goals and production needs. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Because the dress code does vary by position and department, please consult with your hiring manager to confirm your applicable dress code at the time of hire. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas.

Type of Requisition: Regular Clearance Level Must Currently Possess: Secret Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: SCA Job Qualifications: Skills: Nondestructive Testing (NDT), Quality Assurance (QA), Visual Testing Certifications: None Experience: 3 + years of related experience US Citizenship Required: Yes Job Description: QUALITY ASSURANCE REPRESENTATIVE III / NDT II Trained and Qualified in Nondestructive Testing Level II (Visual, Liquid Penetrant and Magnetic Particle Inspection) with 3+ years' direct experience in U.S. Navy shipboard/Submarine NDT Inspections. Develops QA Workbooks with Test and Inspection Plans. Computer skills in Work and Excel required. Performs a variety of quality control tests/inspections on products, materials, components, parts, etc. at various stages of the production process to ensure compliance with quality and reliability standards. Records and analyzes data and writes summaries and reports to validate or show deviations from existing standards. Works closely with management to ensure adherence to ISO standards and NAVSEA Standard Items. Recommends modifications to existing, or suggests new, standards, methods, and procedures. Maintains appropriate documentation related to quality assurance tests and inspections. Provides quality training. May provide guidance and work leadership to less-experienced staff members. Guides and directs employees in quality improvement efforts. Participates in special projects as required. Electrical Cableway and Connector knowledge a plus. May require professional, technical, or company certification(s), depending on job assignment. Some travel may be required depending on task. Knowledge in welding and Welder Qualification is a plus. 25 % or more travel required Requires HS diploma/GED; 3+ years of direct experience Requires Non Destructive Testing Level II certification for Visual Testing, Liquid Penetrant Testing, and Magnetic Particle Testing Must be a US citizen Active Secret clearance required. GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #hireshipyardcareersgdit The likely hourly rate for this position is between $32.30 - $43.70. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 25-50% T elecommuting Options: Onsite Work Location: USA CA Chula Vista Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to five years of applicable welding experience\n\n\n, • ASNT NDT Level II Certification, ore relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n

Epsilon Systems Solutions, Inc. has opportunities available for full time Hull Welder Repair/Fabrication Technician I in San Diego, CA. \n Summary: The Hull Welder Repair/Fabrication Technician will repair hull damage to rails, hull structure, cabin tops and any other metal areas in accordance with OEM technical specifications in CONUS & OCONUS locations, as required. \n Roles and Responsibilities: \n • Perform hull Intermediate level maintenance and emergent repairs onboard assigned/designated heavy equipment and boats listed on the Equipment List to determine project scope repairs and necessary replacements. \n\n • Perform MIG/TIG welding service in accordance with Naval Ships.\n, • Perform service in accordance with NAVSEA T0300-AU-SPN-010 Fabrication Welding and Inspection of Small Boats and Craft Aluminum Hulls.\n, • High school diploma or equivalent\n, • Minimum of 3 years of experience repairing and troubleshooting hull damage to rails, hull, structure, cabin tops and any other metal areas relating to heavy equipment and boats.\n\n\n, • Possess moderate understanding of technical requirements.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Ability to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n\n\n, • Travel may be required within and outside of the continental United States.\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n \n \n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. Experienced welders who are able to perform open root welding. Nature and Scope \n • An employee in this position must be able to work with their peers as well as individually, and follow directions from team leads, supervisors, and managers. They must follow work instructions and processes, weld according to part drawings, execute tasks, and assist peers and lower level welders while remaining productive and highly efficient. These employees are also expected to be able to work without official drawings, using their expertise to fulfill needs of a customer.\n, • They must have the ability to work on the highest level of complexity parts. They will regularly provide direction, feedback, and instruction to other welders. They must have the ability to take guidance, feedback, and priority from Team Leads, Inspector, Welding Engineer, supervisor, or respective manager to continually improve performance, productivity and/or quality of completed product.\n, • Employees in this position are expected to have impeccable quality with practically none of their products subject to required reworking or rejection. These employees will work with a wide range of materials, operate an array of equipment, and can handle unique challenges. It is expected they can meet tight tolerance requirements on parts demanding higher than usual precision. Must have ability to work in multiple areas of the shop and carry multiple certifications.\n, • Employees in this role must pass and maintain required welding qualification tests. They must be fully able to read, comply and understand welding procedures, and must be able to climb and work from ladders, scissor/man lifts, and scaffolds.\n\n Equipment that may need to be set up and operated to complete duties: \n • Welding equipment for GTAW, GMAW, GMAW-P, and FCAW\n, • Fabrication equipment such as a saw, grinder, plasma cutter, and drill press\n, • Turntable or Rotary Welding Positioner\n, • Measurement tools and gauges for checking work\n, • Crane, or transporter for moving materials, tools, and equipment\n, • Computer for completing work orders, recording work hours, and online training\n, • Welding equipment and software for semi- automated or automated machines\n, • Other equipment that may be necessary for completion of work\n\n Principal Accountabilities \n • Comply with all of Solar's Environmental, Health and Safety Programs, Regulations and Guidelines, Policies, procedures, and best practices; use proper PPE, proper tools, etc\n, • Weld per ASME B31.3 standards and comply with PED standards as specified\n, • Weld per AWS D1.1 as needed\n, • Comply with Solar Turbines standards for pressure vessels and structural elements\n, • Perform pipe fitting without assistance unless unsafe to do so\n, • Clean welds including the cutting and repairing of unacceptable welds\n, • Check own work for conformance to welding procedure and specifications\n, • Check work of lower-level fabricators, providing feedback and suggestions when necessary\n, • Ensure that the welding procedures have been followed and quality has not been compromised\n, • Prepare material of own job when necessary\n, • Have work regularly inspected via Radiography (X-Ray) Inspection\n, • Provide welding/ fabrication support to other departments as needed (i.e., mock-up, rework, stud shooting, etc.)\n, • Use of Manufacturing Execution System to view drawings, read and follow work instructions, and record work order hours\n, • Participate in Lean Continuous Improvement projects and trainings on safety, quality, velocity, and cost\n, • Meet or exceed individual and team performance metrics for quality and on time delivery\n\n Qualifications \n • Must be able to recognize and avoid hazards and unsafe operation of equipment\n, • Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation\n, • Must be able to certify on pipe 6G position\n, • Must be able to certify on specified welding methods\n, • Proficient in welding with Duplex Material\n, • High School Diploma, GED, or equivalent required\n, • Annual eye exam required\n, • Annual hearing conservation exam required\n, • Successful completion of a welding hands-on assessment is required to qualify for an interview.\n\n Summary Pay Range: $32.52- $48.78 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n \n • Tuition Reimbursement\n, • Sign on Bonus\n\n, • These benefits also apply to part-time employees Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at . Posting Dates: March 25, 2026 - April 8, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification preferred.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value \n Propulsion Controls Engineering has an open position for a Welder Lead, with a minimum of six years marine and/or shipyard experience. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. \n Welder Lead Job Summary: \n Responsibilities include but are not limited to setting up work sites for hot work, hot work chits, gas free certifications and fire watch coordination. Determines material requirements for repairs. Reads and works from basic work specifications and drawings. Manages welders and fitters to accomplish the scope of work provided, meet schedule deadlines, and comply with safety requirements. Inspects welder fit up prior to welding, documents fit up on the inspection log, coordinates NDT inspections with QA, accomplish 009-06 inspections, submits Inspection deficiency reports and conditions found reports. Obtain welding qualifications to include GTAW, FCAW, GMAW, SMAW, BRAZE, and LOKRING. \n Job Requirements and Qualifications: \n Education: \n • Minimum of 6-10 years of experience as a welder/fitter within the marine and/or shipyard industry.\n, • Demonstrate knowledge of industrial processes and safety standards and requirements for hot work including: Marine Chemist Certifications, Shipyard Competent Person updates, Gas Free Work Scopes and Hot Work Permits.\n, • Must be proficient in blueprint reading.\n, • Must be proficient in 4E specifications.\n, • Possess knowledge of MIL-STD-22D, MIL-STD-1689, Tech pub-278,\n, • Posses various welding qualifications.\n, • Demonstrated positions of management and/or leadership.\n, • Demonstrate conflict resolution capabilities.\n, • Possess general computer skills.\n, • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) \n, • Paid Time Off\n, • Company paid holidays\n, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan \n \n \n WELDER LEAD \n EEO/AA/Vet/Disabled

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. Experienced welders who are able to perform open root welding. Nature and Scope \n • An employee in this position must be able to work with their peers as well as individually, and follow directions from team leads, supervisors, and managers. They must follow work instructions and processes, weld according to part drawings, execute tasks, and assist peers and lower level welders while remaining productive and highly efficient. These employees are also expected to be able to work without official drawings, using their expertise to fulfill needs of a customer.\n, • They must have the ability to work on the highest level of complexity parts. They will regularly provide direction, feedback, and instruction to other welders. They must have the ability to take guidance, feedback, and priority from Team Leads, Inspector, Welding Engineer, supervisor, or respective manager to continually improve performance, productivity and/or quality of completed product.\n, • Employees in this position are expected to have impeccable quality with practically none of their products subject to required reworking or rejection. These employees will work with a wide range of materials, operate an array of equipment, and can handle unique challenges. It is expected they can meet tight tolerance requirements on parts demanding higher than usual precision. Must have ability to work in multiple areas of the shop and carry multiple certifications.\n, • Employees in this role must pass and maintain required welding qualification tests. They must be fully able to read, comply and understand welding procedures, and must be able to climb and work from ladders, scissor/man lifts, and scaffolds.\n\n Equipment that may need to be set up and operated to complete duties: \n • Welding equipment for GTAW, GMAW, GMAW-P, and FCAW\n, • Fabrication equipment such as a saw, grinder, plasma cutter, and drill press\n, • Turntable or Rotary Welding Positioner\n, • Measurement tools and gauges for checking work\n, • Crane, or transporter for moving materials, tools, and equipment\n, • Computer for completing work orders, recording work hours, and online training\n, • Welding equipment and software for semi- automated or automated machines\n, • Other equipment that may be necessary for completion of work\n\n Principal Accountabilities \n • Comply with all of Solar's Environmental, Health and Safety Programs, Regulations and Guidelines, Policies, procedures, and best practices; use proper PPE, proper tools, etc\n, • Weld per ASME B31.3 standards and comply with PED standards as specified\n, • Weld per AWS D1.1 as needed\n, • Comply with Solar Turbines standards for pressure vessels and structural elements\n, • Perform pipe fitting without assistance unless unsafe to do so\n, • Clean welds including the cutting and repairing of unacceptable welds\n, • Check own work for conformance to welding procedure and specifications\n, • Check work of lower-level fabricators, providing feedback and suggestions when necessary\n, • Ensure that the welding procedures have been followed and quality has not been compromised\n, • Prepare material of own job when necessary\n, • Have work regularly inspected via Radiography (X-Ray) Inspection\n, • Provide welding/ fabrication support to other departments as needed (i.e., mock-up, rework, stud shooting, etc.)\n, • Use of Manufacturing Execution System to view drawings, read and follow work instructions, and record work order hours\n, • Participate in Lean Continuous Improvement projects and trainings on safety, quality, velocity, and cost\n, • Meet or exceed individual and team performance metrics for quality and on time delivery\n\n Qualifications \n • Must be able to recognize and avoid hazards and unsafe operation of equipment\n, • Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation\n, • Must be able to certify on pipe 6G position\n, • Must be able to certify on specified welding methods\n, • Proficient in welding with Duplex Material\n, • High School Diploma, GED, or equivalent required\n, • Annual eye exam required\n, • Annual hearing conservation exam required\n, • Successful completion of a welding hands-on assessment is required to qualify for an interview.\n\n Summary Pay Range: $32.52- $48.78 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n \n • Tuition Reimbursement\n, • Sign on Bonus\n\n, • These benefits also apply to part-time employees Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at . Posting Dates: March 25, 2026 - April 8, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at or follow us on our LinkedIn page at . To be considered you must apply by going to .

The general purpose of this position is to layout and weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements.Essential Duties and Responsibilities.Lay out, positions, and secures parts and assemblies according to specifications.Demonstrated a

This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. They must follow work instructions and p

Simple Application, Immediate Hire. All Experience Levels Encouraged to Apply. Full Time, Part Time & Seasonal Openings Available

Provides guidance and work leadership to less-experienced welders. WELDER, COMBINATION, MAINTENANCE.

Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA.Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines.Join the top team on the waterfront, working for unrivaled comp

As a Hull Welder Repair/Fabrication Technician, you will play a vital role in restoring and repairing hull damage on various metal structures including rails and cabin tops, adhering to OEM technical specifications both CONUS and OCONUS. Hull Welder Repair/Fabrication Technician in San Diego, CA. Co

EXCEPTIONAL FABRICATOR AND WELDER NEEDED!. Aspire to be a top-notch fabricator (we promote from within). We are looking for hardworking, meticulous, and personable individuals for a Fabricator position.

As an Experienced Structural Welder, you will report to the Production Superintendent and work on welding steel, aluminum, and stainless-steel materials using SMAW, GTAW, and/or GMAW processes.

Welder with some knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design with minimal Supervision.

Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Job Summary / Welder Journeyman:.

We are on the lookout for a skilled and dedicated fabricator/welder who is ready to embark on a rewarding career with us.

Maritime Division specializes in supporting C4ISR system installations on ships and submarines.As a vital member of our Alteration Installation Teams, you will gain invaluable experience working in prestigious shipyards worldwide.We pride ourselves on providing unmatched compensation and benefits fo

Join Our Team as a Metal Fabricator/Welder!. Vortex Engineering is a highly respected metal fabricator known for supporting the modernization of U. Aiming to be a top fabricator in the industry (we promote from within).

Hull Welder Repair/Fabrication Technicians to join our team as full-time employees. The Hull Welder Repair/Fabrication Technician will focus on repairing hull damage to rails, cabin tops, and other critical metal areas while adhering to industry standards.