Structural jobs in Bay Shore, NYCreate job alerts

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Job Description Commercial HVAC/R Technician Are you a highly skilled and experienced HVAC/R Technician ready to apply your expertise to critical federal facilities? Join a leading firm dedicated to optimizing real estate performance, facility operations, and workforce outcomes by seamlessly connecting technology, buildings, and people. We are seeking a dedicated HVAC/R Technician to join our facilities engineering program, focusing on the operation, maintenance, troubleshooting, and repair of essential facility equipment and systems. If you're passionate about ensuring high-performing, future-ready environments and are ready to contribute your multi-skilled talents to a rapidly growing, integrity-driven team, we invite you to build something great with us! What's in it for you? * Competitive Compensation: Earn between $30-$35 per hour, recognizing your valuable expertise and contributions. * Comprehensive Benefits Package: We invest in your well-being with a robust benefits offering, including: * Medical & Rx coverage * Dental and Vision insurance * Flexible Spending Accounts (FSA) * A strong 401(k) Retirement Plan to help secure your future. * Life Insurance/AD&D, Long Term Disability, and Short-Term Disability for added security. * Generous Paid Time Off (PTO) and Holiday Pay to ensure work-life balance. * Impactful Work: Contribute directly to optimizing federal and commercial assets, enhancing mission success, and creating high-performing environments. * Growth-Oriented Culture: Join a rapidly growing team where individual strengths are thoughtfully aligned with team needs, fostering long-term success and career development through tools like the Predictive Index. * Commitment to Giving Back: Be part of an organization with a growing philanthropy program focused on gratitude, giving back, partnerships, and mentorship within communities. Key Responsibilities: * Comprehensive System Maintenance & Repair: Perform essential maintenance, monitoring, and repairs across Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems to ensure facilities and building systems meet applicable standards. * HVAC System Optimization: Maintain, inspect, calibrate, and replace parts for heating equipment, chillers (air and/or water-cooled), DX units, pumps, cooling towers, fan coil units, VAVs, and air distribution systems to ensure optimum performance. * Advanced Controls Management: Install, maintain, and repair various HVAC controls, including DDC, pneumatic, electric, and electronic systems, and expertly troubleshoot and repair HVAC/BAS control problems. * Troubleshooting & Diagnostics: Efficiently troubleshoot and test controls using specialized equipment like test gauges, amp meters, hydro thermographs, and computers, addressing service calls promptly. * Corrective Maintenance & Quality Assurance: Perform corrective maintenance on equipment, inspect, and test systems to maintain technical integrity, proposing corrective actions when necessary. * Technical Preparedness & Safety: Remain current with technology and electrical safety codes by reviewing technical manuals. Work safely indoors and outdoors, navigating rooftops and tight spaces, utilizing ladders and safety equipment. * Operational Support & Reporting: Maintain responsibility for facility services, corrective maintenance, and inventory control. Prepare estimates for M.E.P. (Mechanical, Electrical, Plumbing) system repairs/installations and make recommendations for such services. What We're Looking For: * Extensive HVAC/R Expertise: A minimum of five (5) years of commercial HVAC/R journeyman level experience. * Industry Certifications: Must hold EPA Universal level certification per Section 608 of the Clean Air Act, and either NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification. * BAS & RCM Proficiency: Demonstrated experience in setting up and managing BAS (Building Automation System) schedules, set points, and alarms, along with experience in general RCM (Reliability-Centered Maintenance) practices and procedures. * Physical Capability: Capable of performing physical labor, including walking, standing, lifting up to 40lbs, pulling, climbing up and down ladders, and possessing the agility/dexterity to perform assigned duties. * Communication & Collaboration: Strong communication skills are essential for effective interface and coordination with other technicians and team members. * Government Clearance: Must be able to successfully pass a government background investigation. * Educational Foundation: High School Diploma or GED Equivalent is required. Graduation from an apprentice program or trade school is preferred. * Preferred Skills: Familiarity with Niagara and skills in Maximo or other CMMS (Computerized Maintenance Management Systems) are a plus. Ready to connect technology, buildings, and people? If you're a skilled HVAC/R Technician looking to join a leading team that values innovation, integrity, and impact, we encourage you to apply! Equal Employment Opportunity (EEO) Statement: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionJob Description Vacuum Instruments Corporation is a pioneer in providing state-of-the-art leak detection solutions for diverse applications and industries. Our systems have ensured the safety and performance of countless products that we use in our daily lives from the cars we drive to the air conditioners in our houses, the pacemakers in our bodies, and the satellites we launch into space. We are looking for a detail-oriented person fully skilled in TIG welding from small “ornamental” type welding to structural welding, certification is not required but is welcomed. Also skilled in MIG structural welding for machine frames. The candidate should be well motivated and have the ability to work with minimal supervision, with at least 3 years of prior experience desired. Responsibilities • Create material cut lists from drawings., • Weld stainless steel thin wall tubing at low amperages, • Weld stainless steel plate material at higher amperages, • Weld CRS tube frames and machine supports, • Ability to weld in all positions., • Select proper materials and equipment required, • Visual inspections of completed work, • Adhere to all safety procedures and policies Requirements • Perform welding based on approved specifications and drawings, • Process welded component parts utilizing machinery such as mills, lathes, sanders, grinders, and saws., • Skilled in positioning and clamping workpieces prior to welding, • Knowledgeable in the use of proper alloy filler metals, • Some heavy lifting will be required

Job Description Job Summary: As a Structural Steel Erector, you will play a crucial role in the construction industry by assembling and installing structural steel frameworks for buildings and other structures. Working as part of a skilled team, you will interpret blueprints, follow safety protocols, and utilize specialized equipment to ensure the timely and accurate completion of projects. This role demands physical strength, attention to detail, and a commitment to safety standards. Responsibilities: * Interpret Blueprints: Study and interpret blueprints, sketches, and other specifications to understand the layout and dimensions of the steel structures. * Prepare Work Area: Assist in the preparation of work areas by clearing debris, setting up safety equipment, and ensuring proper access for equipment and materials. * Assemble Steel Structures: Utilize hand and power tools to assemble steel beams, columns, and other structural components according to project plans and specifications. * Install Components: Lift and position steel components into place, ensuring proper alignment and connection using bolts, welds, or other fastening methods. * Operate Equipment: Safely operate equipment such as lulls, hoists, material lifters, to lift and maneuver heavy steel components into position. * Welding: Perform welding tasks as necessary to join steel components together securely, following welding procedures and safety guidelines. * Quality Control: Inspect finished structures to ensure they meet quality standards and comply with building codes and specifications. * Safety Compliance: Adhere to all safety protocols and regulations, including wearing appropriate personal protective equipment (PPE) and participating in safety training programs. * Communication: Maintain open communication with team members, supervisors, and other stakeholders to coordinate tasks and address any issues or concerns that arise during the construction process. * Project Documentation: Keep accurate records of work performed, including daily logs, materials used, and any deviations from the original plan. Requirements: * Experience: Previous experience in structural steel erection or a related field is preferred. * Physical Stamina: Ability to perform physically demanding tasks, including lifting heavy objects, working at heights, and standing for extended periods. * Technical Skills: Proficiency in reading blueprints and using hand and power tools commonly used in steel erection. * Safety Consciousness: Strong commitment to safety practices and protocols to prevent accidents and injuries on the job site. * Teamwork: Ability to work effectively as part of a team, following instructions and collaborating with colleagues to achieve project goals. * Certifications: Possession of relevant certifications, such as welding certifications or OSHA safety training, may be advantageous. * Reliability: Dependability and punctuality are essential for meeting project deadlines and maintaining a productive work environment. Conclusion: The role of a Structural Steel Erector is vital in the construction industry, contributing to the creation of safe and durable structures. If you are physically fit, detail-oriented, and thrive in a fast-paced environment, this position offers opportunities for professional growth and a rewarding career at Trident Steel. Company DescriptionHere at Trident Steel we are committed to providing exceptional services to our Luxury Home clients. Our founder and owner, Matt Cantor, has over 20 years of experience in the construction industry, with nearly a decade of that specializing in Luxury Home Structural Steel. Trident Steel offers the highest quality steel solutions to our clients. Our team is dedicated to providing premium customer service throughout the duration of the project. We pride ourselves on our ability to deliver competitive quotes for any budget without sacrificing quality or integrity. With Trident Steel, you can trust that your project is in the hands of experienced professionals who are committed to providing exceptional results.Here at Trident Steel we are committed to providing exceptional services to our Luxury Home clients. Our founder and owner, Matt Cantor, has over 20 years of experience in the construction industry, with nearly a decade of that specializing in Luxury Home Structural Steel.\r\n\r\nTrident Steel offers the highest quality steel solutions to our clients. Our team is dedicated to providing premium customer service throughout the duration of the project. We pride ourselves on our ability to deliver competitive quotes for any budget without sacrificing quality or integrity. With Trident Steel, you can trust that your project is in the hands of experienced professionals who are committed to providing exceptional results.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Flexible schedule, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Who we are: We are a property damage mitigation service industry disruptor! We provide 24/7/365 restorative solutions to property damaged by water, fire, mold, asbestos and other hazardous materials. Armed with a start-up mentality, our business is primed and ready for immense growth. For more than 6 years, our independently owned & operated Long Island, NY organization has grown to provide valuable and varied services to local home owners, businesses, and property managers. It is no surprise why we are a four-time winner of Best Restoration Specialist on Long Island, NY. Key Responsibilities: • Performs restoration work with a focus on precision, quality, and safety, • Ensures all tasks meet or exceed industry standards and NYS compliance regulations, • Communicates proactively with team members, clients, and project managers to ensure clarity and alignment, • Maintains a clean, organized, and safe work environment at all times, • Takes ownership of your work, identifying and resolving issues before they impact the client, • Continuously seeks ways to improve processes, skills, and the overall client experience, • Upholds the companys commitment to urgency, empathy, and integrity on every job, • Ensure ls each project contributes to restoring the property fully and exceeds client expectationsDesired outcomes:, • Protect the Property - maintain a clean & workspace that enhances the overall outcome of the project and client, • Be a leader in delivering smart, and efficient solutions that reflect your craftmanship, • Continuously deliver 5-Star Client Experiences, • Effective Communicate with Project Manager and Clients to help demonstrate UWRGs unique value propositionRequirements:, • At least 1 year experience in restoration clean up (water, mold and fire damage) and eager to learn ( experience not required), • Excellent attention to detail with a commitment to accuracy., • Exceptional communication (listening, speaking and writing), analytical and organizational skills., • Proactive and self-motivated leadership skills and qualities, • Familiarity with a restoration, construction or insurance-related industry., • Self-starter with strong time management and prioritization abilities., • Understanding of water, fire, mold, and/or structural restoration processes, preferred., • Must have a valid drivers license and reliable transportation 24/7, • Ability to work flexible, longer hours during emergency situations, • Be part of a rotating on-call schedule including weekends and sometimes holidays, • Ability to repeatedly push/pull/lift/carry items, • Ability to work with/around cleaning products/chemicals, • Ability to work with/around cleaning products/chemicals

Northwell Health’s Department of Cardiology is seeking a Director of Advanced Heart Failure to join the highly skilled cardiac team at South Shore University Hospital located in Bay Shore, New York. Northwell Health’s Department of Cardiology has seen tremendous growth over the past five years within Long Island, New York City and Westchester, with the goal of providing comprehensive, integrated health care and wellness services. South Shore University Hospital has become a destination for residents in Suffolk County who are in need of world-class care. In fact, more people choose South Shore University Hospital for complex heart and lung care than any other hospital on the east end of Long Island. As the tertiary hospital of Northwell’s Eastern Region, we take care of complex heart failure patients, and have a wide referral network. We have programs in critical care, cardiac surgery, coronary and peripheral interventions, structural heart disease, advanced electrophysiology, amongst others, and therefore, are able to support the increasing needs of our heart failure population. The Advanced Heart Failure Program across Northwell Health is a multidisciplinary team including heart failure cardiologists and surgeons, nurse practitioners and registered nurses, as well as pharmacy, behavioral health, social work, exercise physiology and nutritional services. We offer the full spectrum of care to the advanced heart failure patient from medical to device and surgical therapies such as CardioMems™ implantation, cardiac resynchronization therapy, cardiac contractility technology, Barostim™, high risk cardiac surgery, temporary and durable mechanical circulatory support including left ventricular assist device (LVADs), and heart transplantation. We also have an active clinical trials program that allow us to give access to our patients to the most advanced research and innovative medical-device therapies within clinical trials. We offer graduate medical training in all areas of cardiology, including advanced heart failure, and are active teachers at the Zucker School of Medicine at Hofstra/Northwell. The ideal candidate will be Board Certified/Eligible in ABIM Advanced Heart Failure and Transplant Cardiology. 4+ years of clinical experience, required. Additional experience and ability to read Cardiopulmonary Exercise Tests are a plus. The candidate will spend a majority of time at South Shore University Hospital taking care of inpatient and outpatients with heart failure. There are opportunities to also spend time at North Shore University Hospital to participate in the transplant and LVAD programs. We offer a competitive salary and benefits package. In addition, an academic appointment with The Zucker School of Medicine at Hofstra/Northwell is commensurate with credentials and experience. Physicians will be employed as members of Northwell Physician Partners, the fifth largest medical group in the country. Northwell Health is New York State’s largest health care provider and private employer, with 21 hospitals, 850+ outpatient facilities, and more than 16,600 affiliated physicians. We care for over two million people annually in the New York metro area and beyond. Our 84,000 employees – including 18,900 nurses and 4,900 employed doctors, are working to change health care for the better. We are making breakthroughs in medicine at the Feinstein Institutes for Medical Research and training the next generation of medical professionals at the Donald and Barbara Zucker School of Medicine at Hofstra/Northwell and at many of our clinical sites. To apply, please send your CV to the Office of Physician Recruitment: ___ To apply, please send your CV to the Office of Physician Recruitment: or visit our webpage: Northwell Health is an Equal Opportunity Employer. EOE M/F/D/V

Job Description Professional Engineer Engineerings Skills required: • Structural Engineering- design, analysis, calculations, field evaluations, wood, steel, concrete, • Civil Engineering- site design, wastewater, drainage, retaining walls, grading, • Building Inspections- pre-purchase, system specific stuctural and/or diagnosis, • AuotCAD, • Professional Engineer preferred, Intern or degreed engineer will be considered Business Skills required: • Manage multiple projects on quick turnaround, • Organized, • Client communication Other requirements:

Job Description CNC Programmer The CNC programmer works within the Engineering Department to create and evaluate existing CNC programs for vertical and horizontal lathes, and multi-axis milling machines. Specific Responsibilities: • Ability to create and evaluate and improve existing CNC programs for vertical and horizontal lathes, and multi-axis (4-5 axis) milling machines., • Solid understanding of feeds and speeds for aerospace materials., • Be a team player for all lean activities continuous improvement projects., • Tool selection and process layout on a consistent basis, working with customers to ensure work can be accomplished., • Create shop floor documentation including operation sheets and work instructions, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Unigraphics NX experience, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick Time, Holidays 401k FSA AFLAC Air Industries Group is an Equal Opportunity Employer Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Design Engineer Bohemia, NY • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: • Design custom structural test fixtures that meet customer statement of work requirements, • Create fixture concepts based on requirements, • Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer, • Interfaces with customers and the engineering team to translate design needs, • Participate in and conduct initial and ongoing design reviews, • Select appropriate structural material based on engineering analysis, • Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies, • Create drawings to commercial standards that can be used for fabrication and assembly, • Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation, • Apply tolerances to ensure parts are produced with the desired fit, • Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems., • Familiarity with various fabrication methods, • Prepare fabrication plan and fixture assembly procedures, • Act as the technical contact for the fabricators and assemblers during the production phase of projects, • Supporting quoting efforts for Design/Fabrication as needed, • Collaborate with Project Managers to status ongoing projects, • Provide project engineering support during all aspects of the test program, • Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast., • Coordinate required resources and schedule required to conduct testing, • Interface with customers, • Write test procedures and test reports, • Travel as required within the continental US, • Overtime will be required during certain periods of a project Required Qualifications: • BSME or comparable, • 4+ years' experience working as a Design Engineer, • Currently hold an FE certification and eligible to go for a PE, • A PE licensure will eventually be required, • Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software, • Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products, • Knowledge of FEM/Analysis, • Must be a US Citizen and able to pass a drug test and background check, • Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements, • Ability to read and interpret test specifications, • Must be computer literate, including MS Office, • Must be able to work in a fast-paced work environment, • Ability to work without supervision and to provide technical consultation and guidance, • Experience managing labor and resource schedules, • Strong communication skills, both written and verbal, • Demonstrated technical innovation/guidance, project management, and problem solving, • Experience in using FEM software like ANSYS is a plus but not required, • Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company matching, • Paid time off, • Group life insurance, • Employee activities, • A family-friendly work culture Job Posted by ApplicantPro

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro

Job Description Strategic Business Development Professional Aerospace | Defense | High-Tech REMOTE About Dayton T. Brown, Inc.: Join Dayton T. Brown, Inc., a proud leader serving both military and commercial markets with comprehensive Engineering and Testing services, Technical Publications, and cutting-edge Mission Systems. With our national workforce spanning 31 states and our headquarters in Bohemia, NY, we are experiencing significant growth. Our commitment to delivering the highest quality solutions to world-class clients is fueled by our dedication to attracting top talent and fostering professional development. • Engineering and Test Division: Leveraging cutting-edge equipment and technologies, we conduct critical environmental, dynamic, airframe qualification, and life extension structural testing tailored to the exacting standards of the Aerospace, Defense, and High-Tech Industries., • Mission Systems Division: We specialize in the development and deployment of mobile Sensitive Compartmented Information Facilities (SCIFs) for the U.S. Navy., • Technical Services Division: We provide comprehensive technical documentation and logistics support services for leading Aerospace, Defense, and High-Tech Original Equipment Manufacturers (OEMs) and Tier 1 Suppliers. This unique portfolio of services, combined with your established industry relationships, creates a powerful synergy to deliver exceptional value and solve complex challenges for our clients. In a dynamic market, Dayton T. Brown, Inc. is experiencing significant growth and seeks accomplished sales professionals who are driven to excel and advance their careers. To consistently deliver the highest quality solutions to our clients, we search for the best talent and nurture their professional growth while working on exciting, interesting projects. We are looking for a Business Development Professional with proven experience and a passion for selling services and solutions to join our team and help spearhead our growth. You will play a critical and active role in the day-to-day sales activities and operations. You must have an entrepreneurial spirit and be comfortable working in a structured sales process environment. Successful candidates will have a can-do, what it takes attitude to sales. What You'll Do: This strategic business development role is designed for a highly motivated and results-oriented sales leader. The successful candidate will possess a proven ability to identify, cultivate, and close new business opportunities within the Aerospace, Defense, and High-Tech sectors. Key responsibilities include: • Developing and executing strategic sales plans to achieve revenue targets., • Cultivating and maintaining strong relationships with Aerospace and Defense OEMs, Tier 1 and Tier 2 suppliers, commercial aviation clients, and other relevant industry stakeholders., • Identifying and qualifying new business opportunities through proactive market research and networking., • Leading the development and presentation of compelling proposals and presentations., • Negotiating and closing complex contracts. Key Responsibilities: • Market Expansion:Identify and pursue business opportunities with aerospace, defense, and commercial clients., • Client Engagement:Develop and maintain strong relationships with key decision-makers, including government agencies and contractors., • Sales Strategy:Create and execute strategic sales plans to capture new opportunities and drive long-term growth., • Solution-Based Selling:Understand client needs and position DTB's services as solutions to their challenges., • Proposal Leadership:Lead proposal development efforts, ensuring high-quality submissions that align with client requirements., • Cross-Functional Collaboration:Work closely with internal teams, including engineering, program management, and operations, to deliver on commitments and exceed client expectations. What We're Looking For The right candidate will bring: • Industry Expertise:Strong understanding of the aerospace and defense sectors, including procurement processes, government contract vehicles, and subcontracting., • Proven Track Record:Demonstrated success in hunting, developing, and closing high-value contracts., • Quota driven - someone who has been in a true sales role with an established sales quota, • Technical Acumen:Ability to engage with engineers, understand complex technical concepts, and communicate solutions effectively., • Relationship-Driven Mindset:Established network within the industry, with the ability to build and sustain long-term partnerships., • Strategic Thinking:Ability to anticipate industry trends, navigate complex sales cycles, and develop winning strategies., • Resilience & Persistence:Comfortable with long sales cycles and committed to driving deals to completion., • Excellent Communication Skills:Capable of engaging effectively with stakeholders at all levels, from engineers to C-suite executives., • Proposal Development Experience:Skilled in crafting compelling proposals and leading teams to secure competitive bids., • Collaboration & Teamwork:Works seamlessly with internal teams to align business development efforts with company capabilities. Preferred Qualifications: • Engineering, MBA, or Advanced Degree(preferred but not required), • Proficiency in Microsoft Word & Excel, • Experienced with Salesforce or alternative CRM, • Experience with Industry Organizations & Networking Events This is a high-impact role where you will be expected to contribute quickly, drive meaningful revenue growth, and help shape the future of DTB's business development efforts. Compensation will be Base- At Plan. . What You'll Experience at Dayton T. Brown, Inc.: • A dynamic and innovative work environment with a strong emphasis on teamwork., • Opportunities for professional growth and development., • Excellent compensation and comprehensive benefits package., • A vibrant company culture with fun employee events, including golf, volleyball, pickleball, and running. Dayton T. Brown, Inc. is an equal opportunity employer- Veterans and Disabled. Job Posted by ApplicantPro

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job Description About Us Action Bullet Resistant is a leader in the design, engineering, and fabrication of custom UL 752-tested ballistic and blast-resistant storefronts, curtain walls, doors, windows, and wall systems. With over two decades of experience, we partner with architects, contractors, and security professionals to deliver innovative solutions that protect what matters most. We are growing and looking for a Drafter / Junior Project Manager to join our team. This position is ideal for someone who is detail-oriented, eager to learn, and motivated to grow in both drafting and project management. Responsibilities * Prepare detailed shop drawings and fabrication drawings using AutoCAD (and/or Revit). * Interpret architectural and structural drawings for storefront, curtain wall, and ballistic product applications. * Assist senior project managers with project schedules, submittals, RFIs, and change orders. * Coordinate with fabricators, installers, and vendors to ensure accuracy and timeliness. * Track material orders and lead times to support smooth project execution. * Participate in client and contractor communications as needed. * Support the team with general project documentation and administrative tasks. Qualifications * Associate’s or Bachelor’s degree in Drafting, Engineering, Architecture, Construction Management, or related field (or equivalent experience). * 1–3 years of drafting or construction industry experience preferred. * Proficiency in AutoCAD (Revit and Bluebeam a plus). * Strong organizational skills and attention to detail. * Ability to read and interpret architectural/engineering drawings. * Excellent communication skills and willingness to learn project management practices. * Ability to work independently and as part of a team in a fast-paced environment. What We Offer * Competitive salary commensurate with experience. * Opportunities for growth into full Project Management roles. * Health benefits, PTO, and company holidays. * A supportive and collaborative work environment. * The chance to be part of a company at the forefront of ballistic and blast-resistant construction. How to Apply Please submit your resume and portfolio (if available) via Indeed. We look forward to reviewing your application and welcoming a motivated team member to Action Bullet Resistant. Company DescriptionAction Bullet Resistant is a leader in the design, engineering, and fabrication of custom UL 752-tested ballistic and blast-resistant storefronts, curtain walls, doors, windows, and wall systems. With over two decades of experience, we partner with architects, contractors, and security professionals to deliver innovative solutions that protect what matters most.Action Bullet Resistant is a leader in the design, engineering, and fabrication of custom UL 752-tested ballistic and blast-resistant storefronts, curtain walls, doors, windows, and wall systems. With over two decades of experience, we partner with architects, contractors, and security professionals to deliver innovative solutions that protect what matters most.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionStructural Design Engineer My name is Bill Stevens, and I have a new full time Structural Design Engineer opportunity available for a major firm located in North Babylon, Long Island that could be of interest to you, please review my specification below. This position will be paying a fulltime salary of $140,000 - $160,000 and an outstanding benefits package. Responsibilities: Primary responsibility is for structural design and analyses of commercial and industrial structures and facilities located on Suffolk Long Island, working in conjunction with other engineers, designers and architects in the firms North Babylon, Long Island office. The ideal candidate will also have responsibility for occasional field inspections. The candidate should have familiarity with Long Island building codes and zoning ordinances. Experience: The ideal candidate should have an engineering education. Professional Engineering (PE) is preferred and at least seven years of practical experience will be considered for this role. The interview process will include an initial telephone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Responsibilities: • Ability to operate machine center working within +/- .0005 tolerances, adjust machines accordingly, • Load tool or replace broken insert and adjust offsets accordingly, • Use of standard tool including Micrometer, Height gauge, etc. Minimum 2+ years of CNC Machinist/Operator experience - Manufacturing Machinery experience in any of the following a Plus: Milling: Mazak, OKK, Niigata Lathes; Mazak, Puma • Ability to read and understand specs and drawings, • Manufacturing experience a PLUS, • Ability to lift up to 50 pounds Night Shift, 5:15pm-3:45am available. 15% night differential added to hourly and overtime rate. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick, Holidays 401k FSA/AFLAC Facility is air conditioned. Position is based in Bay Shore, New York. There is NO Re-Location for this position. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Skills Required: • Familiar with Walters cutter grinders, • The use of hand tools and electrical to shape, form and assemble metal products, • Set up, operate and maintain all grinding tools, • Study blueprints, work orders or machining instructions to determine product specs and tool requirements., • Inspect and measure all finished work pieces to determine conformance to specs Excellent Benefits and Competitive Hourly rate plus Overtime. Air Conditioned Facility. Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off Holidays 401k FSA/DDC AFLAC Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionDescription: Position Summary: The Vice President of Construction is responsible for overseeing the planning and execution of construction, renovation, and maintenance projects across CPC’s 750,000 square feet of facilities, spanning 12 locations in the Hauppauge area and including over 160 production suites. This leadership role plays a key part in shaping and maintaining CPC’s operational footprint by ensuring projects are completed on time, within budget, and to the highest quality standards. The position offers the opportunity to drive capital improvements, optimize facility performance, and support the continued growth of CPC. Responsibilities: include but are not limited to - • Oversee all construction projects from planning through execution, ensuring adherence to timelines, budgets, and quality standards., • Manage project budgets, tracking costs to align with financial objectives., • Lead project planning, including scope definition, contractor selection, and resource allocation., • Supervise and coordinate the work of maintenance staff, contractors, subcontractors, and vendors to ensure adherence to safety, regulatory, and quality standards., • Ensure all construction activities comply with local, state, and federal regulations, including industry-specific requirements., • Conduct site inspections to monitor progress, resolve issues, and mitigate risks., • Collaborate with internal stakeholders to align construction projects with operational needs., • Drive problem-solving and process improvements, ensuring efficient and cost-effective execution., • Maintain detailed project documentation, including reports, permits, and compliance records; maintain and update facility drawings., • Perform hands-on work including carpentry, drywall, painting, flooring, minor electrical/plumbing, and general repairs, as needed., • Bachelor’s degree in construction management, engineering, architecture or a related field and 15+ years of experience in construction management., • Alternatively, an Associate's degree in construction management, engineering, or a related field with 20+ years of experience in construction management may be considered in lieu of a bachelor's degree., • Licensed General Contractor preferred or equivalent experience as a business owner or senior project manager overseeing complex commercial, residential and/or industrial construction projects; experience in regulated manufacturing or industrial environments preferred., • Leadership experience managing cross-functional teams or projects., • Proven experience managing budgets, contracts and vendor relationships., • In-depth knowledge of building codes, safety regulations, and permit processes; ability to read blueprints and technical drawings. Strong communication skills, with proficiency in Microsoft Office and project management software., • Strong prioritization, multitasking, and organizational skills to manage complex projects effectively., • Ability to make informed decisions under pressure and resolve issues efficiently., • Meticulous attention to detail and a commitment to driving projects to completion., • Strong negotiation, problem-solving, and conflict resolution skills., • Ability to work independently, manage resources, and push projects forward with minimal oversight., • Strong interpersonal skills with the ability to engage stakeholders at all levels., • Required to use hands to operate computer controls., • Specific vision abilities required include close vision, ability to focus., • Flexible schedule (nights, weekends, holidays) responding to needs. Hours/Travel maybe subject to change based on management/company discretion., • Required to be present in the office to provide immediate supervision to direct reports, and collaborate with directors, peers, and other departments daily., • Work environment in production operations facilities include proximity to heavy machinery and pharmaceutical powders, with exposure to loud noises. May supervise maintenance employees. Personal Protective Equipment or Attire Required for Position: As needed. Pay Range: $170,000 - $200,000 per year

Job Description Join our team and work with the world's premier aerospace and ground power company for over 50 years! We are an aerospace and defense company. We design and manufacture structural parts and assemblies that focus on flight safety. Qualifications: • Assemble various mechanical devices using drawings, work instructions, operation sheets, and/or schematics., • Electronic knowledge and experience required, • Perform trouble-shooting tasks as required., • 2+ years of assembly experience OR have demonstrated knowledge, skills and abilities to perform assembly tasks Excellent Benefits and Competitive Hourly rate plus Overtime: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off Holidays 401k FSA/DDC AFLAC Email resume: Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

This multidisciplinary fellowship provides comprehensive training in transcatheter therapies and in advanced echocardiography and CT imaging necessary for the management and care of complex structural heart patients. Lenox Hill Heart and Lung/Northwell Health is offering one-year advanced interventi

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

CTS delivers comprehensive IT solutions to meet the unique demands of mission-driven organizations.We have deep expertise in supporting nonprofits and educational institutions however our team is equipped to handle the complexities of IT across a variety of sectors.Were committed to making technolog

Are you Ready to Engineer Your Career.We work hard and are passionate about what we do but also love to have fun along the way.We celebrate the ability to be a firm of over 2900 employees in the US and beyond who still provides a local office approach and feel to each of our employee-owners.From opp

Robert Half is seeking an experienced and motivated.The Construction Project Manager will be responsible for overseeing all phases of construction projects, ensuring they are completed on time, within budget, and according to the specified quality standards.This includes managing schedules, budgets,

Optikos is seeking a talented and enthusiastic Assembler to join our exceptional optical systems manufacturing group.You will support Optikos standard product builds and a wide range of design projectsfrom medical diagnostics to defense system testing and virtual reality applications to name a few.W

Hiring Now – Production Assembler (1st Shift | Macedon, NY) Pay: $16.Schedule: Monday–Friday, 7:00 AM – 3:30 PM (Overtime as needed) Join a growing team in Macedon, NY where your attention to detail and reliability are valued.We’re hiring a Production Assembler to help with badge reel assem

Tiedeman Road - Brooklyn Ohio 44144.Qualified candidate must be able to report to one of the office sites listed 3 times per week.As a Lead Process Engineer within KeyBanks newly formedExperience & Design Team (KeyXD) youll be at the forefront of transforming how we deliver exceptional client an

Mechanical Design Engineer (Wastewater infrastructure).Are you a Mechanical Design Engineer with experience with Wastewater systems looking to step into a position with a national leader in architectural, design and environmental services where you will be a go-to technical representative to support

A high-end ticketing company is seeking a highly detail-oriented and organized.This role requires someone who can follow established systems with precision manage inventory efficiently and ensure customers receive their tickets promptly.The ideal candidate thrives in a fast-paced environment where u

We are currently seeking early career professionals for multiple roles in Westchester County, Fairfield County and New Jersey.Fairfield County - Luxury Residential, Assistant Project Manager - Supporting PM on large scale estate projects (luxury residential single family mansions).Administrative wor

Tiedeman Road - Brooklyn Ohio 44144.Qualified candidates must be able to report to the Tiedeman Office (Brooklyn OH) 3 days per week; this is a hybrid position.There are multiple openings for this position.The Senior Project Manager Leader provides strategic oversight and hands-on leadership for a t

Project Manager – Electrical Testing & Preventative Maintenance.A well-established electrical services firm is seeking an experienced Project Manager to lead and oversee testing and preventative maintenance projects.This role is critical in ensuring projects are completed on time, within budget, a

Mechanical Design Engineer (Wastewater infrastructure).Are you a Mechanical Design Engineer with experience with Wastewater systems looking to step into a position with a national leader in architectural, design and environmental services where you will be a go-to technical representative to support

Mechanical Design Engineer (Wastewater infrastructure).Are you a Mechanical Design Engineer with experience with Wastewater systems looking to step into a position with a national leader in architectural, design and environmental services where you will be a go-to technical representative to support

We are seeking a highly skilled Electrical Design Engineer with a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems.The ideal candidate will have a solid theoretical background in electrical engineering, spec

We are seeking a highly skilled Electrical Design Engineer with a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems.The ideal candidate will have a solid theoretical background in electrical engineering, spec

We are seeking a highly organized and detail-oriented.This role is essential to ensuring smooth project execution, from initial planning through final delivery.You'll collaborate closely with internal teams and clients to maintain timelines, ensure quality, and deliver exceptional results.Experience

We are currently seeking early career professionals for multiple roles in Westchester County, Fairfield County and New Jersey.Fairfield County - Luxury Residential, Assistant Project Manager - Supporting PM on large scale estate projects (luxury residential single family mansions).Administrative wor

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Robert Half is seeking an experienced and motivated.The Construction Project Manager will be responsible for overseeing all phases of construction projects, ensuring they are completed on time, within budget, and according to the specified quality standards.This includes managing schedules, budgets,

Robert Half is seeking an experienced and motivated.The Construction Project Manager will be responsible for overseeing all phases of construction projects, ensuring they are completed on time, within budget, and according to the specified quality standards.This includes managing schedules, budgets,

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Fortune 500 pharmaceutical company.GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commission

We are seeking a highly organized and detail-oriented.This role is essential to ensuring smooth project execution, from initial planning through final delivery.You'll collaborate closely with internal teams and clients to maintain timelines, ensure quality, and deliver exceptional results.Experience

Fortune 500 pharmaceutical company.GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commission

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Project Manager Electrical Testing & Preventative Maintenance.A well-established electrical services firm is seeking an experienced Project Manager to lead and oversee testing and preventative maintenance projects.This role is critical in ensuring projects are completed on time, within budget, and

Fortune 500 pharmaceutical company.GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commission

Join Our Community of Food People!.Ready to build a career with a company that's leading the food service industry?.Our Diesel Mechanics start at $33.K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!.We offer weekly pay, low-cost Medic

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials

Join Our Community of Food People!.Ready to build a career with a company that's leading the food service industry?.Our Diesel Mechanics start at $33.K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!.We offer weekly pay, low-cost Medic

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower employe

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Multi-Site Maintenance Technician.At Trinity Property Consultants, your expertise is the key to our continued success.Join us and become an essential part of an organization that values your skills and is committed to your professional growth.Guided by our core values of innovation, teamwork, excell

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per eng

Wright-Pierce, an award-winning, multi-discipline environmental engineering firm specializing in water, wastewater and civil infrastructure, is seeking a licensed Civil Project Engineer to join our company.Office locations for this position are Middletown, CT | Westfield, MA| Portland, ME | Topsham,

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

Healthcare Integration Project Manager.SightMD is a rapidly growing integrated ophthalmic provider group, extending the reach of exceptional eye care to patients across New York, New Jersey, Pennsylvania, and Connecticut.With over 127 eye care providers and the convenience of 60 locations, our commi

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods.Evaluates mechanical and electromechanical systems and produ

The Project Manager must have demonstrated corporate experience and provide support staff meeting the following requirements:.Accountable for creating and managing a comprehensive Master Project Management Plan with subordinate Risk Management Plan, Human Resources Plan, Communications Plan, and Qua

Civil Engineer Job Duties: Completes construction projects by preparing engineering design and documents and confirming specifications.Designs construction projects by studying project concep

Owner's Representative, Project Manager.Stantec is seeking an Owner's Representative, Project Manager for the design and construction of a mix of mechanical, electrical, and plumbing infrastructure projects to manage on behalf of owner/developers in the healthcare, science and technology, higher edu

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Linde Engineering North America LLC.Tonawanda, NY, United States | req22293.In this role, you will utilize project management methodologies, system and tools as defined by company.You will also understand the project schedule and work with project team to develop a fabrication plan that supports the

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Location: Melville, Long Island, NY (On-site).Term: About 6 months Possibility of extension: TBD.US Citizen, Green Card, TN, GC EAD and H4 EAD only No third-party agencies corp to corp.Manages cross enterprise IT application development projects of varying size and complexity.

We have an opening for a talented Assembler to gain knowledge of company offerings to better serve clients, provide excellent service to customers and team members, and manage daily responsibilities with a focus on quality and efficiency.Other duties include coordinate tasks to ensure deadlines are

We are seeking a highly skilled Electrical Design Engineer with a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems.The ideal candidate will have a solid theoretical background in electrical engineering, spec

Welder Job Duties: Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized mac

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Robert Half is seeking an experienced and motivated.The Construction Project Manager will be responsible for overseeing all phases of construction projects, ensuring they are completed on time, within budget, and according to the specified quality standards.This includes managing schedules, budgets,

We are seeking a highly organized and detail-oriented.This role is essential to ensuring smooth project execution, from initial planning through final delivery.You'll collaborate closely with internal teams and clients to maintain timelines, ensure quality, and deliver exceptional results.Experience

Healthcare Assistant Project Manager.We are seeking a Healthcare Assistant Project Manager for our PM/CM team in Long Island.The candidate needs a strong history of recent healthcare experience representing owners on capital programs, facility upgrades, renovations and additions for both new and occ

Mechanical Design Engineer (Wastewater infrastructure).Are you a Mechanical Design Engineer with experience with Wastewater systems looking to step into a position with a national leader in architectural, design and environmental services where you will be a go-to technical representative to support

Proficient in reading and understanding engineering, architectural, and structural drawings.

We are seeking an Assembler to expertly assemble small components under a microscope with limited supervision.The ideal candidate will perform tasks such as die bonding, wire bonding, and header assembly using tools like tweezers and microscopes for detailed work.You will operate automated equipment

Project Manager Land Engineering.VHB's growing Hauppauge, NY office is seeking a Senior Civil Engineer/Project Manager to join our Land Engineering team.This position provides an opportunity to work on complex multi-disciplined projects for major institutional, industrial, coastal and real estate c

National Grid is Hiring a Lead Project Manager NY Gas Project Management in our Melville, NY location.Every day we deliver safe and secure energy to homes, communities, and businesses.We are there when people need us the most.We connect people to the energy they need for the lives they live.The pace

Spellman High Voltage Electronics Corporation, a family owned business for over 75 years, takes pride in powering progress in health, security and quality of life.We are key partners with the world's leading medical devices, semiconductor, scientific analytics and industrial systems manufacturers.Wh

Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) Systems Lab Tech.Our employees work on the world's most advanced electronics - from detecting threats for F-35 pilots to illuminating the night for soldiers.Spanning air, land, sea, and space, we are

The Firm was established in 2004 by the Owners/Principal Partners, Larry O'Brien and Chris Tartaglia.There are currently 17 full-time employees on staff, consisting of engineers, architects, drafters, permit expeditors and administrative support staff.The Firm focuses primarily on private sector pro

The candidate in this position will be working under the supervision/direction of a Professional Engineer 2 (Civil/Transportation) and will perform professional engineering duties related to all types of highway or structural engineering design. Qualifying degrees: Civil Engineering, Civil Engineeri

At Bohler, we empower the ambitious to become the accomplished.This greater purpose connects us with like-minded professionals, fosters meaningful relationships, and generates the alignment necessary to produce an unrivaled consulting and employment experience.Our Melville, NY office is looking for

Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials