Trabajos technical communication en Jacksonville, FloridaCrear alertas

We’re unique. You should be, too. We’re changing lives every day. For both our patients and our team members. Are you innovative and entrepreneurial minded? Is your work ethic and ambition off the charts? Do you inspire others with your kindness and joy? We’re different than most primary care providers. We’re rapidly expanding and we need great people to join our team. The Primary Care Physician (PCP) is a licensed/Board Certified/Board Eligible trained professional in internal or family medicine who plays a key role as part of the clinical operations team providing direct patient care and providing assessments primarily in the ambulatory health care center setting, or occasionally in acute care, nursing homes, skilled nursing facilities (SNF) and home settings depending on the nature of the assignment. The responsibilities include but are not limited to: geriatric assessment, medical history, physical exam, diagnosis and treatment, development of the plan of care, health education, specialty referrals, case management referrals, follow-up and clear documentation according to ChenMed standards for quality, service, productivity and teamwork. It also includes the participation in clinical rounds and conferences plus in-depth documentation through written progress notes and summaries. The PCP will be required to demonstrate the ability to function both independently and in collaboration with other health care professionals. The PCP will consult with the applicable managers and medical directors to ensure compliance with guidelines along with participating in risk and quality management programs, clinical meetings and other meetings as required. The PCP will adhere to strict departmental goals/objectives, standards of performance, regulatory compliance, quality patient care compliance, and policies and procedures. ESSENTIAL JOB DUTIES/RESPONSIBILITIES: • Functions independently as a primary care practitioner as part of a patient care team., • Independently assesses acute and non-acute clinical problems., • Performs and documents physical assessments and patient histories, analyzes trends in patient conditions, and develops, documents and implements a patient management plan in response to the data obtained. This also includes assisting in the development of the plan of care in addition to providing appropriate patient/ family/significant other counseling and education., • Plans patient care based on in-depth knowledge of the specific patient population and/ or protocol, anticipating and identifying physiological and/ or psychological problems commonly encountered including the consideration of the patient’s cultural background, level of understanding, personality and support systems. Serves as patient advocate., • Patient management includes the following: 1) writing admission, transfer and discharge orders; 2) ordering and interpreting appropriate laboratory and diagnostic studies: 3) ordering of appropriate medication and treatments; 4) referring patients for consultation when indicated i.e. dermatology, neurology, ophthalmology, endocrine, surgery, intensive care, infectious disease, hematology, psychiatry, social service, dietary, etc.;5) Documentation through in-depth progress notes and summaries., • Participates in patient care rounds and conferences. Communicates patient management strategies to members of the patient care team., • Collaborates with members of the multidisciplinary team to ensure that patient management strategies are successful in meeting patient care needs., • Recognizes situations which require the immediate attention and initiates life-saving procedures when necessary., • Uses advanced communication skills to problem solve complex situations and to improve processes and service to patients., • Collaborates with other multidisciplinary team members to analyze and evaluate current systems of health care delivery to identify and implement new practice patterns as appropriate., • Participates in outside activities that enhance personal and professional growth and development., • Initiates arrangements and writes orders for discharges and completes appropriate paperwork., • Works collaboratively with physicians, nurses, PT, social workers, family and key caregivers to transition the patient to a lower level of care as soon as medically appropriate., • Advocacy & Education-ensuring the patient has an advocate for needed services and any needed education., • Introduces self to patient/family and explain primary care provider role., • Facilitates patient/family conferences to review treatment goals, optimize resource utilization, provide family education and identify needs., • Enhances a collaborative relationship to maximize the patient’s/family’s ability to make informed decisions re: goals of care, palliative care and hospice., • Utilization/Financial Management-managing resource utilization and reimbursement for services., • Facilitates discharge to appropriate level of care and uses preferred providers when additional services are required. KNOWLEDGE, SKILLS & ABILITIES: Competencies for Success Scientific Foundation Competencies • Critically analyzes data and evidence for improving clinical practice., • Integrates knowledge from the humanities and sciences., • Translates research and other forms of knowledge to improve practice processes and outcomes., • Develops new practice approaches based on the integration of research, theory, and practice knowledge. Leadership Competencies • Assumes complex and advanced leadership roles to initiate and guide change., • Provides leadership to foster collaboration with multiple stakeholders (e.g. patients, community, integrated health care teams, and policy makers) to improve health care., • Demonstrates leadership that uses critical and reflective thinking., • Advocates for improved access, quality and cost effective health care., • Advances practice through the development and implementation of innovations incorporating principles of change., • Communicates practice knowledge effectively both orally and in writing., • Participates in professional organizations and activities that influence health outcomes of a population focus. Quality Competencies • Uses best available evidence to continuously improve quality of clinical practice., • Evaluates the relationships among quality, safety, access, and cost and their influence on health care., • Evaluates how organizational structure, care processes, financing, marketing and policy decisions impact the quality of health care., • Applies skills in peer review to promote a culture of excellence., • Anticipates variations in practice and is proactive in implementing interventions to ensure quality. Practice Inquiry Competencies • Provides leadership in the translation of new knowledge into practice., • Generates knowledge from clinical practice to improve practice and patient outcomes., • Applies clinical investigative skills to improve health outcomes., • Leads practice inquiry, individually or in partnership with others., • Disseminates evidence from inquiry to diverse audiences using multiple modalities., • Analyzes clinical guidelines for individualized application into practice. Technology and Information Literacy Competencies • Integrates appropriate technologies for knowledge management to improve health care., • Translates technical and scientific health information appropriate for various users’ needs., • Assesses the patient’s and caregiver’s educational needs to provide effective, personalized health care., • Coaches the patient and caregiver for positive behavioral change., • Demonstrates information literacy skills in complex decision making., • Contributes to the design of clinical information systems that promote safe, quality and cost effective care., • Uses technology systems, with ongoing learning and updates, which capture data on variables for the evaluation of primary care. Policy Competencies • Demonstrates an understanding of the interdependence of policy and practice., • Advocates for ethical policies that promote access, equity, quality, and cost., • Analyzes ethical, legal, and social factors influencing policy development., • Contributes in the development of health policy., • Analyzes the implications of health policy across disciplines., • Evaluates the impact of globalization on health care policy development. EDUCATION AND EXPERIENCE CRITERIA: * MD or DO in Internal Medicine, Family Medicine, Geriatrics or similar specialty required * Must be able to obtain a State Medical License or already have a current, active State Medical License for the state(s) in which he/she will be working * Board certification in Internal Medicine, Family Medicine, Geriatrics or similar specialty is preferred. Board Eligibility is required * Once Board certified, PCP will maintain board certification in their specialty by doing necessary MOC, CME and/or retaking board exams as required * Must have a current DEA number for schedule II-V controlled substances * Basic Life Support (BLS) certification from the American Heart Association (AMA) or American Red Cross required w/in first 90 days of employment. PAY RANGE: $221,141 - $315,915 Salary EMPLOYEE BENEFITS We’re ChenMed and we’re transforming healthcare for seniors and changing America’s healthcare for the better. Family-owned and physician-led, our unique approach allows us to improve the health and well-being of the populations we serve. We’re growing rapidly as we seek to rescue more and more seniors from inadequate health care. ChenMed is changing lives for the people we serve and the people we hire. With great compensation, comprehensive benefits, career development and advancement opportunities and so much more, our employees enjoy great work-life balance and opportunities to grow. Join our team who make a difference in people’s lives every single day. Current Employee apply ___ Current Contingent Worker please see job aid ___ to apply #LI-Onsite

Company: Fusion Medical Staffing Location: Facility in Jacksonville, Florida Job Details Fusion Medical Staffing is seeking a skilled Telemetry RN for a 13-week travel assignment in Jacksonville, Florida. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as a Telemetry RN, • Current Valid RN license in compliance with state regulations, • Current BLS Certification (AHA/ARC), • Progressive Care Certified Nurse (PCCN) Certification, • NIHSS certification The Telemetry Registered Nurse is responsible for providing comprehensive patient care in a telemetry unit, focusing on continuous cardiac monitoring and assessment. This role encompasses evaluating patient health, implementing specialized care plans, administering treatments, and collaborating with healthcare teams to ensure high-quality, patient-centered care for individuals with cardiac conditions. The position requires strong clinical skills in telemetry nursing, critical thinking abilities, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics. Essential Work Functions: • Monitors and interprets cardiac rhythms, vital signs, and other telemetry data to detect abnormalities and respond appropriately, • Administers prescribed medications and treatments in accordance with approved nursing techniques, with a focus on cardiac care, • Prepares equipment and aids physician during cardiac-related procedures and examinations, • Maintains awareness of comfort and safety needs of telemetry patients, • Observes patient, records significant conditions and reactions, and notifies supervisor or physician of patient's cardiac status and response to interventions, • Responds to life-saving situations based upon nursing standards, policies, procedures, and protocols specific to cardiac emergencies, • Documents nursing history and physical assessment for assigned telemetry patients, • Initiates patient education plans according to individualized needs, focusing on cardiac health, risk factors, and lifestyle modifications, • Collaborates with the interdisciplinary team to ensure comprehensive care for telemetry patients, • Maintains confidentiality of patients and client, • Performs other duties as assigned within the scope of practice, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Telemetry RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb5

Are You Our Next Salon Legend? (Salon Leader) Do you have a passion for hair, a head for business, and a heart for leading people? At Hair Cuttery, we don't just cut hair—we craft careers and create confidence. We are looking for a Salon Leader (SL) who is part coach, part entrepreneur, and 100% a culture-shaper. As the "CEO" of your salon, you'll be the primary driver of growth, profitability, and vibe. You aren't just managing a schedule; you're mentoring the next generation of top-tier Salon Professionals. What You'll Do (The Fun Stuff): - Be a Talent Scout: Hunt for the best stylists in the business, partner with local beauty schools, and build a "dream team" that people want to join. - Master the "Guest Journey": Lead by example behind the chair, showing your team how to turn a first-time guest into a lifelong fan. - Grow Your Empire: Use data and digital tools (like our Stylist App and Zenoti) to crush your sales goals, maximize your schedule, and boost your salon's reputation. - Be the Ultimate Mentor: Use the IGROW model to help your associates level up their careers. You're not just a boss; you're a career-launcher. - Set the Stage: Ensure your salon is a safe, clean, and inspiring place to work—adhering to State Board and OSHA standards while keeping the energy high. What You Bring to the Chair: - Leadership Spark: You know how to motivate a team, handle tough conversations with grace, and keep spirits high during a Saturday rush. - Business Savvy: You're comfortable with numbers—from managing payroll percentages to analyzing performance scorecards. - Technical Skill: You're a pro behind the chair! You'll still be performing services and modeling our established hair guides. - Communication Mastery: Whether it's a one-on-one "Personal Development Meeting" or a shout-out on our internal social channels, you know how to get the message across. The Nitty-Gritty (Position Requirements): - License: Must have a cosmetology license in the state you are applying for. - Work Authorization: Must be eligible to work in the United States. - Experience: Minimum of 12 months in a prior Leadership role preferred. - Availability: 40 hours per week (5 days/8 hours per day) is the standard. - The Hustle: You'll need the physical stamina to stand, walk, and perform repetitive salon motions (dexterity is key!) throughout your shift. - Safety First: You can work comfortably in a salon environment with exposure to hair chemicals, scents, and fumes. - The Basics: Basic math skills for cash/inventory and a commitment to attending all required training and events. Why Join Us? We offer a path to growth, a supportive leadership team (you'll report to a District Leader who has your back), and the chance to lead a business that truly impacts people's lives. We also offer benefits, such as medical, dental, and vision, as well as 401 (k), life insurance, PTO/vacation, and more. Legal Note: Salon Leaders must be able to perform the Essential Job Functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. This job description is a living document—as our business grows and evolves, your duties may too! Ready to lead the pack? Apply today and let's see what you can do! Hair Cuttery is hiring in these states: DE, FL, IL, IN, MD, NJ, NC, PA, VA, and WV. Hair Cuttery Family of Brands (HCFB) is the home of Hair Cuttery, Bubbles , and CIBU. The Hair Cuttery Family of Brands provides Equal Employment Opportunities (EEO) to all applicants.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Jacksonville, FL Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour based on experience, • Retention Bonus: $2000 paid every quarter within the first year., • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Kim or text “Jacksonville” to 904-618-3474 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure) Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 8 hours ago (5/14/2026 7:59 AM) Requisition ID 2026-201675 Location (Posting Location) : State/Province FL Location (Posting Location) : City JACKSONVILLE Location (Posting Location) : Postal Code 32220 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Various (United States of America) Job Summary • The Nuclear Medicine technologist assists with providing safe, age appropriate care to the patient by performing all exams provided by the department per department procedures., • The technologist has the knowledge and ability to properly and safely obtain a quality diagnostic study., • He/she is responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of the equipment for the diagnosis and/or treatment of diseases., • The technologist can independently perform job functions., • He/she sets up the equipment to provide imaging service and positions patient for the procedure. Core Responsibilities and Essential Functions Patient Care • Verifies proper clinician order for procedure., • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of radiopharmaceuticals so that no patient condition deteriorates, and no patient suffers undue pain, due to error or poor technique., • Ensures that all studies have proper patient identification and right and left marker are utilized appropriately., • Reviews images for clinically acceptable results and releases patients., • Responds to emergency situations and provides for the restocking of the crash cart and maintenance of life support equipment., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates., • Verifies correct identity of patient using 2 unique identifiers prior to performing a procedure per hospital policy and procedure., • Ensures patient's privacy and comfort is accommodated. Maintains patients dignity throughout the exam/procedure., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physicians instructions when assisting with procedures and exams., • Uses critical thinking skills., • Dialogs with patient/family., • Asks clarifying questions., • Seeks clarification on ambiguous orders., • Understands, demonstrates and documents preprocedural verification and Time Out process when appropriate., • Demonstrates and understands pre-and-post procedural care., • Preps the patient for the procedure., • Demonstrates and understands sterile technique, • Maintains competency with venipuncture. Equipment • Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule. Education and Communications • Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Consistently produces acceptable images, as evidenced by radiologist feedback and quality audits., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Sends all studies to PACS immediately after completion, prints CDs as needed., • Studies that have been transmitted after hours to teleradiography are printed and scanned in PACS, if applicable., • Completes all studies in RIS before completing in PACS., • Prints completed log sheet from teleradiography and submits to Radiologist, if applicable. Operations • Restocks linens and supplies, and maintains NM department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Ability to operate NM equipment within the department., • Maintains Joint Commission standards and any other regulatory agency standards., • Any other duties as assigned., • Takes call when necessary., • Performs other duties as assigned, • Complies with all WellStar Health System policies, standards of work, and code of conduct. Required Minimum Education • High School Diploma General or GED General, • Accredited Program Radiologic Science or Accredited Program Other Required Minimum License(s) and Certification(s) (All certifications are required upon hire unless otherwise stated.) • ARRT-N - ARRT Nuclear Technology or CNMT - Cert Nuclear Med Tech, • BLS - Basic Life Support or ARC-BLS - Amer Red Cross Basic Life Support or BLS-I - Basic Life Support - Instructor Additional License(s) and Certification(s): (none listed) Required Minimum Experience • Minimum 1 year experience in a clinical setting caring for patients (may include clinical rotations Required) or Minimum 1 year NM experience. Preferred Required Minimum Skills • Must exhibit excellent communication skills because this position requires frequent verbal and written communications with: physicians, patients, visitors, departmental staff and nursing staff., • The employee obtains, presents and discusses clinical information regarding job responsibilities on a routine basis., • Candidate must be able to explain or give directions to maintain goodwill, and obtain cooperation with all contacts., • Must possess the ability to function independently and under pressure while still actively participating in a team environment., • Position requires the employee to exhibit excellent customer service skills at all times., • Must be able to perform effectively in a stressful and fast paced work environment., • Must have the ability to prioritize appropriately., • Must be detail oriented and have the capacity to effectively multitask throughout the work shift., • Must have excellent communication skills and the capacity to interact professionally with a variety of customers, including but not limited to patients, families, co-workers, volunteers, and physicians throughout the work shift., • Must possess the ability to function independently, yet productively as a cooperative team member with various work teams associated with the position. Must be compliant, with a willingness to follow all Hospital policies as well as the established practices, protocols and procedures of the position, department and applicable professional standards., • The Nuclear Medicine technologist assists with providing safe, age appropriate care to the patient by performing all exams provided by the department per department protocols., • The technologist has the knowledge and ability to properly and safely obtain a quality diagnostic study., • He/she is responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of the equipment for the diagnosis and/or treatment of diseases., • The technologist can independently perform job functions., • He/she sets up the equipment to provide imaging service and positions patient for the procedure., • Ability to teach and mentor fellow NM staff if needed. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Day (United States of America) Job Posting • How would you like to work in a place where your contributions and ideas are valued?, • A place where you can serve with compassion, pursue excellence and honor every voice?, • At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve., • We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. A Brief Overview • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and/or treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure., • Competent to perform and post-process advanced protocols such as: TAVR, Cardiac CTA, Gated Chest, Runoffs, Brain Perfusions, Lung and Heart Screenings, etc., • Ability to teach and mentor fellow CT Techs., • Functional oversight of department in the absence of the chief tech., • Provides feedback on staff quality of images and patient interaction to Chief Tech and/or Manager. What you will do Leadership • Maintains modality workflow to assure patient throughput that maximizes equipment utilization and meets patient's expectations regarding wait time and thoroughness of exam., • Provides feedback on employee performance management by communicating employee performance concerns to Chief Tech., • Manage department productivity adhering to operational standards., • Works with Chief Tech and system CT Clinical Specialist on new protocol implementation., • Assures that adequate supplies are available in the modality., • Attends and productively participates in Lead Meetings and department meetings., • Serves as an advocate for the Imaging Department and is a liaison for other hospital departments., • Serves as first level of contact for employee concerns., • Participates, maintains and conducts PI (Process Improvement) in the department., • Assists in the hiring process of new personnel, and ensures appropriate on-boarding efforts to validate competency assessments and departmental orientation., • Participates in the competency process for CT technologists on an annual basis., • Assures that the CT department is continuously survey ready. Equipment • Demonstrates the ability to adjust technique so that patient receives the lowest possible dose of ionizing radiation and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule. Patient Care • Verifies proper clinician order for procedure., • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of contrast medias so that no patient condition deteriorates, and no patient suffers undue pain, due to error or poor technique., • Ensures that all studies have proper patient identification and right and left marker are utilized appropriately., • Reviews CT/radiographic images for clinically acceptable results and releases patients., • Responds to emergency situations and provides for the restocking of the crash cart and maintenance of life support equipment., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates., • Verifies correct identity of patient using 2 unique identifiers prior to performing a procedure per hospital policy and procedure., • Ensures patient's privacy and comfort is accommodated. Maintains patient's dignity throughout the exam/procedure., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physician's instructions when assisting with procedures and exams., • Demonstrates proficiency with loading and operating power injection., • Uses critical thinking skills., • Dialogs with patient/family., • Asks clarifying questions., • Seeks clarification on ambiguous orders., • Understands, demonstrates and documents preprocedural verification and Time Out process when appropriate., • Demonstrates and understands pre-and-post procedural care., • Preps the patient for the procedure., • Demonstrates and understands sterile technique., • Maintains competency with venipuncture., • Competent to perform and post-process advanced protocols such as: TAVR, Cardiac CTA, Gated Chest, Runoffs, Lung and Heart Screenings, etc. Education and Communication • Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, so as to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Provides patients with preparatory instruction and explanation of procedures., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Consistently produces acceptable images, as evidenced by radiologist feedback and quality audits., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Sends all studies to PACS immediately after completion, prints CD's as needed., • Studies that have been reported after hours by teleradiography are printed and scanned into PACS, if applicable., • Completes all studies in RIS before completing in PACS., • Prints completed log sheet from teleradiography and submits to Radiologist, if applicable. Operations • Restocks linens and supplies, and maintains the department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies shielding, supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Ability to operate all work stations associated with the CT department., • Ability to push / retrieve images from the CT console to PACS., • Maintain Joint Commission standards and any other regulatory agency standards., • Ability to teach and mentor fellow CT Techs., • Takes call when necessary., • Any other duties as assigned. Qualifications • Accredited Program Radiologic Technology Required and, • Minimum 3 years years' experience in CT Required, • ARRT-R - ARRT Radiography, • ARRT-CT - ARRT Computed Tomography, • BLS - Basic Life Support, • ARC-BLS - Amer Red Cross Basic Life Support, • BLS-I - Basic Life Support - Instructor, • Our people are passionate about what they do, the product they sell, and the customers they serve., • If you're looking for an opportunity to be an opportunity to be a part of a work family that values collaboration, innovation and dedication, we're the right company for you. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Various (United States of America) Job Summary: * Must be flexible with work hours to meet department needs. * Must be dependable, accountable and cooperative. * Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures. * Has the knowledge and ability to properly and safely obtain a quality diagnostic study. * Responsible for performing a wide variety of technical procedures requiring independent judgement, ingenuity and initiative in the utilization of the equipment for the diagnosis and/or treatment of diseases. * Able to independently perform job functions. * Sets up the equipment to provide imaging service and positions patient for the procedure. * Must maintain minimum FDA/MQSA requirements for continuing education, experience and equipment. Core Responsibilities and Essential Functions: Equipment * Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained. * Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner. * Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule. * Ability to properly operate all radiographic equipment in a safe and competent manner, assuring that equipment is not abused and is left in good working order. Patient Care * Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions. * Ensures that all studies have proper patient identification and right and left marker are utilized appropriately. * Reviews radiographic images for clinically acceptable results and releases patients. * Responds to emergency situations. * Uses critical thinking skills. * Seeks clarification on ambiguous orders. * Assists other technologists in all modalities when needed. * Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates as the result of misjudgment. * Verifies two unique patient identifiers per policy and verifies proper clinician order prior to performing a procedure. * Ensures patient's privacy and comfort is accommodated. * Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients. * Understands, demonstrates and documents Pre-Procedure Verification and Time-Out process when appropriate, if applicable. * Demonstrates and understands pre-and-post procedural care, if applicable. * Demonstrates and understands sterile technique, if applicable. * Organizes schedule, time and priorities so that required activities are accomplished within designated time frames. * Follows physicians instructions when assisting with procedures and exams. * Practices RBAC (Read Back and Confirm) when taking verbal orders. Education and Communication * Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members. * Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure. * Participates in the orientation and training of departmental employees. * Provides patients with preparatory instruction and explanation of procedures. * Required documentation is concise, legible and includes precise terminology. * Reads email each day scheduled to work and follows through with assignment. * Completes mandatory departmental and Hospital-wide education without prompting. Quality Control * Produces acceptable images, as evidenced by maintaining a first-time acceptance rate of 95 percent. * Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies. * Completes all studies in RIS, images are oriented, marked, labeled, and noted correctly prior to sending all studies to PACS; prints CDs as necessary. * When submitting procedures for interpretation comparative studies are digitized if necessary and the preliminary sheet is filled out in its entirety, if applicable. * Maintain all documentation so that the facility meets ACR Accreditation standards. * Technologist is knowledgeable in completing and documenting the following ACR/MQSA QC test: Phantom, Visual checklist, Repeat analysis, Compression-pressure, compression thickness, flat filed test, calibration, Dicom printer test. Operations * Restocks linens and supplies, and maintains Mammography Department in clean and orderly condition. * Transports patients, positions patients, and helps them on and off procedure table. * Performs patient charging activities on the day the service is rendered. * Applies shielding. * Prepares and maintains patient follow-up data. * Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage. * Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services. * Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems. * Maintains an individual productivity rate equal to other co-workers. * Familiar with Mammography Tracking System. * Maintains Joint Commission standards and any other regulatory agency standards. * Familiar with FDA/MQSA EQUIP program. * Any other duties as assigned. Required Minimum Education: * Graduate of AMA approved School of Radiology Technology Required and currently ARRT registered. Required * Graduate of AMA approved School of Radiology Technology Required and currently ARRT registered. Required Required Minimum License(s) and Certification(s): All certifications are required upon hire unless otherwise stated. * ARRT Mammography * ARRT Radiography * Basic Life Support or BLS - Instructor Additional License(s) and Certification(s): Required Minimum Experience: • Minimum 1 year experience as a Rad Tech. Required, • Less than 1 year experience in Mammography. Preferred Required Minimum Skills: * Must exhibit excellent communication skills because this position requires frequent verbal and written communications with: physicians, patients, visitors, departmental staff and nursing staff. The employee obtains, presents and discusses clinical information regarding job responsibilities on a routine basis. * Candidate must be able to explain or give directions to maintain goodwill, and obtain cooperation with all contacts. * Must possess the ability to function independently and under pressure while still actively participating in a team environment. * Position requires the employee to exhibit excellent customer service skills at all times. * Must be able to perform effectively in a stressful and fast-paced work environment. * Must have the ability to prioritize appropriately. * Must be detail-oriented and have the capacity to effectively multitask throughout the work shift. * Must have excellent communication skills and the capacity to interact professionally with a variety of customers, including but not limited to patients, families, co-workers, volunteers, and physicians throughout the work shift. * Must possess the ability to function independently, yet productively as a cooperative team member with various work teams associated with the position. * Must be compliant, with a willingness to follow all Hospital policies as well as the established practices, protocols and procedures of the position, department and applicable professional standards. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Various (United States of America) Job Summary • Wellstar Cobb Breast and X-Ray Center are seeking a PT Day Outpatient Registered Mammographer Technologist., • The days and hours for the position are Friday 6:30am - 7:00pm and Saturday 7:30am - 4:00pm., • This position will receive a competitive Sign-On Bonus., • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age-appropriate care by performing all exams according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative., • Able to independently perform job functions., • Sets up equipment to provide imaging service and positions patients for procedures., • Must maintain minimum FDA/MQSA requirements for continuing education, experience and equipment. Core Responsibilities and Essential Functions Equipment • Demonstrates the ability to adjust technique to ensure the best study possible while maintaining image quality., • Reports malfunctioning equipment to supervisor or service provider for timely correction., • Cleans, disinfects and maintains equipment under infection control policy and department cleaning schedule., • Safely and competently operates all radiographic equipment; ensures equipment is not abused and remains in good working condition. Patient Care • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Ensures all studies have correct patient identification and appropriate right/left markers., • Reviews radiographic images for clinically acceptable results and releases patients., • Responds to emergency situations., • Uses critical thinking skills., • Seeks clarification on ambiguous orders., • Assists other technologists in all modalities when needed., • Observes patient condition and evaluates situations requiring physician intervention., • Verifies two unique patient identifiers per policy and verifies proper clinician order prior to procedure., • Ensures patient privacy and comfort., • Demonstrates competence in applying appropriate procedures, equipment, supplies and techniques based on patient age., • Understands, demonstrates and documents Pre-Procedure Verification and Time-Out process when appropriate., • Demonstrates and understands pre- and post-procedural care when applicable., • Demonstrates and understands sterile technique when applicable., • Organizes schedule, time and priorities to complete required activities within designated time frames., • Follows physicians' instructions when assisting with procedures and exams., • Practices RBAC (Read Back and Confirm) when taking verbal orders. Education and Communication • Patiently and clearly explains exam purpose and nature using AIDET to minimize anxiety and promote cooperation., • Ensures patient questions, concerns or contraindications are addressed before the procedure; notifies physician when unresolved., • Participates in orientation and training of departmental employees., • Provides preparatory instruction and explanation of procedures., • Documentation is concise, legible and uses precise terminology., • Reads email daily and follows through with assignments., • Completes mandatory departmental and hospital-wide education without prompting. Quality Control • Produces acceptable images with a first-time acceptance rate of 95%., • Ensures equipment is fully operational before each use by checking calibration and operating deficiencies., • Completes all studies in RIS; ensures images are oriented, marked, labeled and notated correctly before sending to PACS; prints CDs as needed., • Digitizes comparative studies when necessary and completes preliminary sheets when applicable., • Maintains documentation required to meet ACR Accreditation standards., • Demonstrates knowledge in completing and documenting ACR/MQSA QC tests including Phantom, Visual Checklist, Repeat Analysis, Compression Pressure, Compression Thickness, Flat Field Test, Calibration and DICOM Printer Test. Operations • Restocks linens and supplies and maintains Mammography Department in clean and orderly condition., • Transports and positions patients and assists them on and off the procedure table., • Performs patient charging activities on the day services are rendered., • Applies shielding., • Prepares and maintains patient follow-up data., • Willingly provides knowledge and assistance to others as needed and as time allows., • Performs clerical and support duties to ensure continuity and quality of services., • Keeps supervisor informed and promptly reports problems or potential concerns., • Maintains individual productivity equal to other coworkers., • Familiar with Mammography Tracking System., • Maintains Joint Commission and regulatory standards., • Familiar with FDA/MQSA EQUIP program., • Any other duties as assigned. Required Minimum Education • Graduate of an AMA-approved School of Radiology Technology - Required, • Currently ARRT registered - Required Required Minimum License(s) and Certification(s) (All required upon hire unless otherwise stated) • ARRT Mammography, • ARRT Radiography, • Basic Life Support (BLS) through American Heart Association Required Minimum Experience • Minimum 1 year experience as a Rad Tech - Required, • Minimum 1 year experience in Mammography - Preferred Required Minimum Skills • Must exhibit excellent communication skills due to frequent interaction with physicians, patients, visitors, staff and nursing teams., • Routinely obtains, presents and discusses clinical information regarding job responsibilities., • Able to explain or give directions to maintain goodwill and obtain cooperation., • Must function independently and under pressure while actively participating as a team member., • Must consistently demonstrate excellent customer service skills., • Must perform effectively in a stressful and fast-paced work environment., • Must have the ability to prioritize appropriately., • Must be detail-oriented with the capacity to multitask effectively throughout the shift., • Must communicate professionally with patients, families, coworkers, volunteers and physicians., • Must function independently yet productively as a cooperative team member., • Must comply with all hospital policies, protocols and professional standards., • Competent in all aspects of Mammography, patient positioning, exposure factors and radiation protection., • Must understand anatomy and pathology and how they affect the quality of a procedure. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Day (United States of America) Job Summary: • Wellstar Douglas in Douglasville, Georgia is seeking a FT Nuclear Medicine Technologist., • The days and hours for the position are Thursday, Friday and Saturday (7:00am - 7:30pm)., • The Nuclear Medicine Technologist assists with providing safe, age-appropriate care to the patient by performing all exams provided by the department per department procedures., • The technologist has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and/or treatment of diseases., • Can independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure. Core Responsibilities and Essential Functions: Patient Care • Verifies proper clinician order for procedure., • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of radiopharmaceuticals so that no patient condition deteriorates and no patient suffers undue pain due to error or poor technique., • Ensures that all studies have proper patient identification and right and left markers when applicable., • Reviews images for clinically acceptable results and releases patients., • Responds to emergency situations and ensures restocking of the crash cart and maintenance of life support equipment., • Assists other technologists in all modalities when needed., • Observes patient condition and evaluates situations when physician intervention is needed to ensure no deterioration occurs., • Verifies correct identity of patient using 2 unique identifiers per hospital policy., • Ensures patient privacy and comfort is accommodated; maintains patient dignity throughout the exam/procedure., • Demonstrates competence in selecting and applying procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities to ensure required activities occur within designated time frames., • Follows physicians' instructions when assisting with procedures and exams., • Uses critical thinking skills., • Dialogs with patient/family., • Asks clarifying questions., • Seeks clarification on ambiguous orders., • Understands, demonstrates and documents preprocedural verification and Time Out process when appropriate., • Demonstrates and understands pre- and post-procedural care., • Preps the patient for the procedure., • Demonstrates and understands sterile technique., • Maintains competency with venipuncture. Equipment • Demonstrates the ability to adjust technique so the patient receives the best study possible and image quality is maintained., • Reports malfunctioning equipment to supervisor or service provider so problems can be corrected promptly., • Cleans, disinfects and maintains equipment according to infection control policy and department cleaning schedule. Education and Communications • Patiently and clearly explains purpose and nature of the exam to the patient using AIDET to minimize anxiety and facilitate cooperation., • Ensures patient questions, concerns or contraindications are satisfactorily addressed; notifies physician when unresolved., • Participates in orientation and training of departmental employees., • Required documentation is concise, legible and includes precise terminology., • Reads email each scheduled workday and follows through with assignments., • Completes mandatory departmental and hospital-wide education without prompting. Quality Control • Consistently produces acceptable images as evidenced by radiologist feedback and quality audits., • Ensures equipment is fully operational prior to each use by checking calibration and operating deficiencies., • Sends all studies to PACS immediately after completion; prints CDs as needed., • Studies transmitted after hours by teleradiography are printed and scanned into PACS when applicable., • Completes all studies in RIS before completing in PACS., • Prints completed teleradiography log sheet and submits to Radiologist when applicable. Operations • Restocks linens and supplies and maintains the NM department in clean and orderly condition., • Transports patients, positions patients and assists them on and off the procedure table., • Performs patient charging activities on the day of service., • Applies supportive and immobilization devices and equipment., • Willingly shares knowledge and assists others as needed and routinely as time allows., • Performs clerical and support duties as needed to ensure continuity and quality of services., • Keeps supervisor informed of responsibilities and promptly reports problems or potential concerns., • Maintains individual productivity rate equal to other coworkers., • Ability to operate NM equipment within the department., • Maintains Joint Commission standards and other regulatory agency requirements., • Any other duties as assigned., • Takes call when necessary., • Performs other duties as assigned., • Complies with all Wellstar Health System policies, standards of work and code of conduct. Required Minimum Education: • Graduate of an approved AMA Nuclear Medicine Program - Required Required Minimum License(s) and Certification(s): (All required upon hire unless otherwise stated) • ARRT Nuclear Technology or Certified Nuclear Medicine Technologist (CNMT), • Basic Life Support (BLS) through American Heart Association - Required Required Minimum Experience: • Minimum 1 year experience in a clinical setting caring for patients (may include clinical rotations) - Required, • Minimum 1 year Nuclear Medicine experience - Preferred Required Minimum Skills: • Must exhibit excellent communication skills due to frequent verbal and written interaction with physicians, patients, visitors, departmental staff and nursing staff., • Routinely obtains, presents and discusses clinical information regarding job responsibilities., • Must be able to explain or give directions to maintain goodwill and cooperation with all contacts., • Must function independently and under pressure while participating actively in a team environment., • Must exhibit excellent customer service skills at all times., • Must perform effectively in a stressful and fast-paced work environment., • Must be able to prioritize appropriately and multitask effectively., • Must be detail oriented., • Must interact professionally with patients, families, coworkers, volunteers and physicians., • Must function independently yet productively as a cooperative team member., • Must be compliant with all hospital policies, practices, protocols and applicable professional standards., • Assists with providing safe, age-appropriate care by performing all exams per department protocols., • Has the knowledge and ability to obtain a quality diagnostic study properly and safely., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative., • Able to independently perform job functions., • Sets up equipment and positions patient for the procedure., • Ability to teach and mentor fellow NM staff if needed. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Various (United States of America) Hours • PRN Various - Various hours to meet the needs of the outpatient MRI department. Location • Atlanta Gynecologic Oncology Job Summary • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and/or treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure. Core Responsibilities and Essential Functions Patient Care • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of contrast medias so that no patient condition deteriorates, and no patient suffers undue pain, due to error or poor technique., • Ensures that all studies have proper patient identification., • Reviews images for clinically acceptable results and releases patients., • Responds to emergency situations., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates., • Verifies correct identity of patient prior to performing a procedure according to hospital policy and procedure., • Ensures patient's privacy and comfort is accommodated. Maintains patients dignity throughout the exam/procedure., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physicians instructions when assisting with procedures and exams., • Understands, demonstrates and documents pre-procedure verification and Time Out process when appropriate., • Demonstrates and understands pre-and-post procedural care., • Preps the patient for procedure., • Demonstrates and understands sterile technique., • Prepares trays and catheters for procedures, participates in biopsies if applicable., • Demonstrates proficiency on the Dynacad if applicable., • Prepares and may administer contrast., • Verifies order is with contrast, checks patient GFR (labs) and dosing of contrast is weight based., • Uses appropriate safety devices to protect patients hearing during exam., • Understands anatomical positioning, correct labeling of body parts, and infant immobilizer., • Knows cross sectional anatomy, includes all appropriate anatomy., • Uses critical thinking skills., • Seeks clarification on ambiguous orders. Equipment • Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule., • Ability to operate patient monitoring system. Education and Communications • Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Produces acceptable images, follows established exam protocols., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Sends all studies to PACS immediately after completion in RIS and prints CDs as needed., • Studies that have been transmitted after hours to teleradiography are printed and scanned in PACS, if applicable., • Maintains MRI suite in a safe environment, i.e. locked down at all times. Operations • Restocks linens and supplies, and maintains MRI department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Ability to operate all work stations associated with the MRI scanner., • Ability to push / retrieve studies to the PACS system., • Maintains Joint Commission standards and any other regulatory agency standards., • Any other duties as assigned., • Takes call when necessary., • Performs other duties as assigned, • Complies with all WellStar Health System policies, standards of work, and code of conduct. Required Minimum Education • Other / Certificate Radiologic Technology Required Minimum License(s) and Certification(s) • All certifications are required upon hire unless otherwise stated., • ARMRIT - Certified MRI Technologist or ARRT-MR - ARRT Magnetic Resonance Imagin, • BLS - Basic Life Support or BLS-I - Basic Life Support - Instructor Additional License(s) and Certification(s) • (No content provided) Required Minimum Experience • Minimum 1 year experience in a clinical setting caring for patients; prefer MRI clinical setting. Required Required Minimum Skills • Must exhibit excellent communication skills because this position requires frequent verbal and written communications with: physicians, patients, visitors, departmental staff and nursing staff., • The employee obtains, presents and discusses clinical information regarding job responsibilities on a routine basis., • Candidate must be able to explain or give directions to maintain goodwill, and obtain cooperation with all contacts., • Must possess the ability to function independently and under pressure while still actively participating in a team environment., • Position requires the employee to exhibit excellent customer service skills at all times., • Must be able to perform effectively in a stressful and fast paced work environment., • Must have the ability to prioritize appropriately., • Must be detail oriented and have the capacity to effectively multitask throughout the work shift., • Must have excellent communication skills and the capacity to interact professionally with a variety of customers, including but not limited to patients, families, co-workers, volunteers, and physicians throughout the work shift., • Must possess the ability to function independently, yet productively as a cooperative team member with various work teams associated with the position. Must be compliant, with a willingness to follow all Hospital policies as well as the established practices, protocols and procedures of the position, department and applicable professional standards., • Competent in all aspects of MRI, patient positioning, pulse sequence parameters and magnet safety., • Must have an understanding of anatomy and pathology as to how they affect the quality of a procedure. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Day (United States of America) Hours: Monday - Friday 7:30 am - 4:00 pm, no call, no holidays, and no weekends! Sign on Bonus: $20,000.00! Job Summary • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and/or treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure. Core Responsibilities and Essential Functions Patient Care • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of contrast medias so that no patient condition deteriorates, and no patient suffers undue pain, due to error or poor technique., • Ensures that all studies have proper patient identification., • Reviews images for clinically acceptable results and releases patients., • Responds to emergency situations., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates., • Verifies correct identity of patient prior to performing a procedure according to hospital policy and procedure., • Ensures patient's privacy and comfort is accommodated. Maintains patients dignity throughout the exam/procedure., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physicians instructions when assisting with procedures and exams., • Understands, demonstrates and documents pre-procedure verification and Time Out process when appropriate., • Demonstrates and understands pre-and-post procedural care., • Preps the patient for the procedure., • Demonstrates and understands sterile technique., • Prepares trays and catheters for procedures, participates in biopsies if applicable., • Demonstrates proficiency on the Dynacad if applicable., • Prepares and may administer contrast., • Verifies order is with contrast, checks patient GFR (labs) and dosing of contrast is weight based., • Uses appropriate safety devices to protect patients hearing during exam., • Understands anatomical positioning, correct labeling of body parts, and infant immobilizer., • Knows cross sectional anatomy, includes all appropriate anatomy., • Uses critical thinking skills., • Seeks clarification on ambiguous orders., • Utilizes Dose Reduction Techniques. Equipment • Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule., • Ability to operate patient monitoring system. Education and Communications • Patiently and clearly explains purpose and nature of exam to patient prior to starting procedure, to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Produces acceptable images, follows established exam protocols., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Sends all studies to PACS immediately after completion in RIS and prints CDs as needed., • Studies that have been transmitted after hours to teleradiography are printed and scanned in PACS, if applicable., • Maintains CT suite in a safe environment, i.e. locked down at all times. Cardiac CT Scanning • Understands cardiac protocols and their pulse sequences., • Gets studies protocoled., • Knows and understands cardiac planes and how to achieve them., • Able to adjust protocols per patient, ie breath holds, arrythmias, anatomy, level of consciousness and ability to cooperate., • Able to correctly choose appropriate looklocker and prepulse delays on delayed enhancement., • Able to adjust BB pulse thickness for complete blood suppression., • Evaluate phase contrast series for aliasing and appropriately corrects velocity encoding., • Interacts with the cardiac radiologist and can respond with any additional sequences requested. Operations • Restocks linens and supplies and maintains CT Department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Ability to push / retrieve studies to the PACS system., • Maintains Joint Commission standards and any other regulatory agency standards., • Any other duties as assigned., • Takes call when necessary., • Performs other duties as assigned., • Complies with all Wellstar Health System policies, standards of work, and code of conduct. Required Minimum Education • Successful completion of an accredited CT program or ARRT-R, • Successful completion of WellStar's Cardiac CT training program. Required Required Minimum License(s) and Certification(s) • All certifications are required upon hire unless otherwise stated., • Basic Life Support or BLS - Instructor, • ARRT Computed Tomography or ARRT Radiography Additional License(s) and Certification(s) Required Minimum Experience • Minimum 2 years experience in a clinical setting caring for patients; Required, • Prefer CT clinical setting. Preferred Required Minimum Skills • Must exhibit excellent communication skills because this position requires frequent verbal and written communications with physicians, patients, visitors, departmental staff and nursing staff., • The employee obtains, presents and discusses clinical information regarding job responsibilities on a routine basis., • Candidate must be able to explain or give directions to maintain goodwill and obtain cooperation with all contacts., • Must possess the ability to function independently and under pressure while still actively participating in a team environment., • Position requires the employee to exhibit excellent customer service skills at all times., • Must be able to perform effectively in a stressful and fast paced work environment., • Must have the ability to prioritize appropriately. Must be detail oriented and have the capacity to effectively multitask throughout the work shift., • Must have excellent communication skills and the capacity to interact professionally with a variety of customers, including but not limited to patients, families, co-workers, volunteers, and physicians throughout the work shift., • Must possess the ability to function independently, yet productively as a cooperative team member with various work teams associated with the position. Must be compliant, with a willingness to follow all Hospital policies as well as the established practices, protocols and procedures of the position, department and applicable professional standards., • Competent in all aspects of CT, patient positioning, pulse sequence parameters and magnet safety., • Must have an understanding of anatomy and pathology as to how they affect the quality of a procedure. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Evening (United States of America) Job Summary • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgement, ingenuity and initiative in the utilization of the equipment for the diagnosis and/or treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure., • Must maintain minimum FDA/MQSA requirements for continuing education, experience and equipment. Core Responsibilities and Essential Functions Patient Care • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Ensures that all studies have proper patient identification and right and left marker are utilized appropriately., • Reviews radiographic images for clinically acceptable results and releases patients., • Responds to emergency situations., • Uses critical thinking skills., • Seeks clarification on ambiguous orders., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates as the result of misjudgment., • Verifies two unique patient identifiers per policy and verifies proper clinician order prior to performing a procedure., • Ensures patient's privacy and comfort is accommodated., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Understands, demonstrates and documents Pre-Procedure Verification and Time-Out process when appropriate, if applicable., • Demonstrates and understands pre-and-post procedural care, if applicable., • Demonstrates and understands sterile technique, if applicable., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physicians instructions when assisting with procedures and exams., • Practices RBAC (Read Back and Confirm) when taking verbal orders. Equipment • Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule., • Ability to properly operate all radiographic equipment in a safe and competent manner, assuring that equipment is not abused and is left in good working order. Education and Communication • Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Provides patients with preparatory instruction and explanation of procedures., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Produces acceptable images, as evidenced by maintaining a first-time acceptance rate of 95 percent., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Completes all studies in RIS, images are oriented, marked, labeled, and noted correctly prior to sending all studies to PACS; prints CDs as necessary., • When submitting procedures for interpretation comparative studies are digitized if necessary and the preliminary sheet is filled out in its entirety, if applicable., • Maintain all documentation so that the facility meets ACR Accreditation standards., • Technologist is knowledgeable in completing and documenting the following ACR/MQSA QC test: Phantom, Visual checklist, Repeat analysis, Compression-pressure, compression thickness, flat filed test, calibration, Dicom printer test. Operations • Restocks linens and supplies, and maintains Mammography Department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies shielding., • Prepares and maintains patient follow-up data., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Familiar with Mammography Tracking System., • Maintains Joint Commission standards and any other regulatory agency standards, • Familiar with FDA/MQSA EQUIP program, • Any other duties as assigned., • Performs other duties as assigned, • Complies with all WellStar Health System policies, standards of work, and code of conduct. Required Minimum Education • Accredited Program Radiologic Technology Required Minimum License(s) and Certification(s) • All certifications are required upon hire unless otherwise stated., • ARRT-M - ARRT Mammography, • ARRT-R - ARRT Radiography, • BLS - Basic Life Support or ARC-BLS - Amer Red Cross Basic Life Support or BLS-I - Basic Life Support - Instructor Additional License(s) and Certification(s) • (No content provided) Required Minimum Experience • Minimum 1 year experience as a Rad Tech Required, • Minimum 1 year experience in Mammography. Preferred Required Minimum Skills • Must exhibit excellent communication skills because this position requires frequent verbal and written communications with: physicians, patients, visitors, departmental staff and nursing staff., • The employee obtains, presents and discusses clinical information regarding job responsibilities on a routine basis., • Candidate must be able to explain or give directions to maintain goodwill, and obtain cooperation with all contacts., • Must possess the ability to function independently and under pressure while still actively participating in a team environment., • Position requires the employee to exhibit excellent customer service skills at all times., • Must be able to perform effectively in a stressful and fast paced work environment., • Must have the ability to prioritize appropriately., • Must be detail oriented and have the capacity to effectively multitask throughout the work shift., • Must have excellent communication skills and the capacity to interact professionally with a variety of customers, including but not limited to patients, families, co-workers, volunteers, and physicians throughout the work shift., • Must possess the ability to function independently, yet productively as a cooperative team member with various work teams associated with the position., • Must be compliant, with a willingness to follow all Hospital policies as well as the established practices, protocols and procedures of the position, department and applicable professional standards., • Competent in all aspects of Mammography, patient positioning, exposure factors and radiation protection., • Must have an understanding of anatomy and pathology as to how they affect the quality of a procedure. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Various (United States of America) Job Summary: • Wellstar Douglas in Douglasville, Georgia is seeking a FT Registered MRI Tech., • The Registered MRI Tech must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age-appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing various technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patients for the procedure. Hours for this role: * Thursday 7:00am - 7:30pm * Friday 7:00am - 7:30pm * Saturday 7:00pm - 7:30am Core Responsibilities and Essential Functions: Patient Care • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of contrast medias so that no patient condition deteriorates and no patient suffers undue pain due to error or poor technique., • Ensures that all studies have proper patient identification., • Reviews images for clinically acceptable results and releases patients., • Responds to emergency situations., • Assists other technologists in all modalities when needed., • Observes patient condition and evaluates when physician intervention is necessary so no patient condition deteriorates., • Verifies correct identity of patient prior to performing a procedure according to hospital policy and procedure., • Ensures patient privacy and comfort is accommodated; maintains patient dignity throughout the exam/procedure., • Demonstrates competence in selecting and applying appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities to accomplish required activities within designated time frames., • Follows physicians' instructions when assisting with procedures and exams., • Understands, demonstrates and documents pre-procedure verification and Time Out process when appropriate., • Demonstrates and understands pre- and post-procedural care., • Preps the patient for procedure., • Demonstrates and understands sterile technique., • Prepares trays and catheters for procedures; participates in biopsies when applicable., • Demonstrates proficiency on the Dynacad when applicable., • Prepares and may administer contrast., • Verifies order is with contrast, checks patient GFR (labs) and ensures contrast dosing is weight-based., • Uses appropriate safety devices to protect the patient's hearing during the exam., • Understands anatomical positioning, correct labeling of body parts and infant immobilizer., • Knows cross-sectional anatomy and includes all appropriate anatomy., • Uses critical thinking skills., • Seeks clarification on ambiguous orders. Equipment • Demonstrates the ability to adjust technique so that patient receives the best study possible and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider so problems can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule., • Ability to operate patient monitoring system. Education and Communications • Patiently and clearly explains purpose and nature of exam to patient prior to procedure using AIDET to minimize anxiety and facilitate cooperation., • Ensures that patient questions, concerns or contraindications are satisfactorily addressed; notifies physician when unresolved prior to procedure., • Participates in the orientation and training of departmental employees., • Required documentation is concise, legible and includes precise terminology., • Reads email each scheduled workday and follows through with assignment., • Completes mandatory departmental and hospital-wide education without prompting. Quality Control • Produces acceptable images and follows established exam protocols., • Ensures equipment is fully operational prior to each use by checking calibration and operating deficiencies., • Sends all studies to PACS immediately after completion in RIS and prints CDs as needed., • Studies transmitted after hours to teleradiography are printed and scanned into PACS when applicable., • Maintains MRI suite in a safe environment, locked down at all times. Operations • Restocks linens and supplies and maintains MRI department in clean and orderly condition., • Transports patients, positions patients and assists them on and off procedure table., • Performs patient charging activities on the day service is rendered., • Applies supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request and when time allows., • Performs routine clerical and support duties when required to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities, providing prompt notification of problems or potential problems., • Maintains individual productivity rate equal to other coworkers., • Ability to operate all workstations associated with the MRI scanner., • Ability to push/retrieve studies to the PACS system., • Maintains Joint Commission standards and any other regulatory agency standards., • Any other duties as assigned., • Takes call when necessary., • Performs other duties as assigned., • Complies with all Wellstar Health System policies, standards of work and code of conduct. Required Minimum Education: • Successful completion of an accredited MRI program or ARRT-R - Required Required Minimum License(s) and Certification(s): (All required upon hire unless otherwise stated) • Certified MRI Technologist or ARRT Magnetic Resonance Imaging, • Basic Life Support (BLS) through American Heart Association Required Minimum Experience: • Minimum 1 year experience in a clinical setting caring for patients - Required, • MRI clinical setting - Preferred Required Minimum Skills: • Must exhibit excellent communication skills due to frequent verbal and written communication with physicians, patients, visitors, departmental staff and nursing staff., • Routinely obtains, presents and discusses clinical information regarding job responsibilities., • Must be able to explain or give directions to maintain goodwill and cooperation., • Must function independently and under pressure while still participating actively in a team environment., • Must exhibit excellent customer service skills at all times., • Must be able to perform effectively in a stressful and fast-paced work environment., • Must have the ability to prioritize appropriately., • Must be detail-oriented and able to multitask effectively throughout the shift., • Must have excellent communication skills and the ability to interact professionally with a variety of customers including patients, families, coworkers, volunteers and physicians., • Must function independently yet productively as a cooperative team member with various work teams associated with the position., • Must be compliant with all hospital policies as well as established practices, protocols and professional standards., • Competent in all aspects of MRI, patient positioning, pulse sequence parameters and magnet safety., • Must have an understanding of anatomy and pathology and how they affect procedure quality. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

How would you like to work in a place where your contributions and ideas are valued? A place where you can serve with compassion, pursue excellence and honor every voice? At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve. We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. Work Shift Day (United States of America) Job Summary • How would you like to work in a place where your contributions and ideas are valued?, • A place where you can serve with compassion, pursue excellence and honor every voice?, • At Wellstar, our mission is simple, yet powerful: to enhance the health and well-being of every person we serve., • We are proud to have become a shining example of what's possible when the brightest professionals dedicate themselves to making a difference in the healthcare industry, and in people's lives. A Brief Overview • Must be flexible with work hours to meet department needs., • Must be dependable, accountable and cooperative., • Assists with providing safe, age appropriate care to the patient by performing all exams provided by the department according to department procedures., • Has the knowledge and ability to properly and safely obtain a quality diagnostic study., • Responsible for performing a wide variety of technical procedures requiring independent judgment, ingenuity and initiative in the utilization of equipment for the diagnosis and/or treatment of diseases., • Able to independently perform job functions., • Sets up the equipment to provide imaging service and positions patient for the procedure., • Competent to perform and post-process advanced protocols such as: Cardiac MRI, Brain Perfusions, etc., • Ability to teach and mentor fellow MR Techs., • Functional oversight of department in the absence of the chief tech., • Provides feedback on staff quality of images and patient interaction to Chief Tech and/or Manager. What you will do Leadership • Maintains modality workflow to assure patient throughput that maximizes equipment utilization and meets patient's expectations regarding wait time and thoroughness of exam., • Provides feedback on employee performance management by communicating employee performance concerns to Chief Tech., • Manage department productivity adhering to operational standards., • Works with Chief Tech and system MRI Clinical Specialist on new protocol implementation, • Assures that adequate supplies are available in the modality., • Attends and productively participates in Lead Meetings and department meetings., • Serves as an advocate for the Imaging Department and is a liaison for other hospital departments, • Serves as first level of contact for employee concerns., • Participates, maintains and conducts PI (Process Improvement) in the department., • Assists in the hiring process of new personnel, and ensures appropriate on-boarding efforts to validate competency assessments and departmental orientation., • Participates in the competency process for MRI technologists on an annual basis., • Assures that the MRI department is continuously survey ready. Equipment • Demonstrates the ability to adjust technique so that patient receives the lowest possible dose of ionizing radiation and that image quality is maintained., • Reports problems regarding malfunctioning equipment to supervisor or service provider, so that problem can be corrected in a timely manner., • Cleans, disinfects and maintains equipment in accordance with infection control policy and department cleaning schedule. Patient Care • Verifies proper clinician order for procedure., • Obtains complete clinical history, gathers examination data and assesses for contraindicating conditions., • Follows established procedures for the administration of contrast medias so that no patient condition deteriorates, and no patient suffers undue pain, due to error or poor technique., • Ensures that all studies have proper patient identification and right and left marker are utilized appropriately., • Reviews MRI images for clinically acceptable results and releases patients., • Responds to emergency situations and provides for the restocking of the crash cart and maintenance of life support equipment., • Assists other technologists in all modalities when needed., • Observes patient condition and properly evaluates situations when physician intervention is necessary so that no patient condition deteriorates., • Verifies correct identity of patient using 2 unique identifiers prior to performing a procedure per hospital policy and procedure., • Ensures patient's privacy and comfort is accommodated. Maintains patient's dignity throughout the exam/procedure., • Demonstrates competence in the determination and application of appropriate procedures, equipment, supplies and techniques based on the age of patients., • Organizes schedule, time and priorities so that required activities are accomplished within designated time frames., • Follows physician's instructions when assisting with procedures and exams., • Demonstrates proficiency with loading and operating power injection., • Uses critical thinking skills., • Dialogs with patient/family., • Asks clarifying questions., • Seeks clarification on ambiguous orders., • Understands, demonstrates and documents preprocedural verification and Time Out process when appropriate., • Demonstrates and understands pre-and-post procedural care., • Preps the patient for the procedure., • Demonstrates and understands sterile technique, • Maintains competency with venipuncture. Education and Communication • Patiently and clearly explains purpose and nature of exam to patient prior to starting of procedure, so as to minimize anxiety and facilitate cooperation using AIDET; Acknowledge, Introduce, Discuss, Explain, and Thank you of all patients and family members., • Ensures that patient's questions, concerns or contraindications are satisfactorily addressed, notifying physician when this cannot be accomplished, prior to the initiation of the procedure., • Participates in the orientation and training of departmental employees., • Provides patients with preparatory instruction and explanation of procedures., • Required documentation is concise, legible and includes precise terminology., • Reads email each day scheduled to work and follows through with assignment., • Completes mandatory departmental and Hospital-wide education without prompting. Quality Control • Consistently produces acceptable images, as evidenced by radiologist feedback and quality audits., • Ensures that equipment is fully operational prior to each use, by checking for proper calibration and operating deficiencies., • Sends all studies to PACS immediately after completion, prints CD's as needed., • Studies that have been reported after hours by teleradiography are printed and scanned into PACS, if applicable., • Completes all studies in RIS before completing in PACS., • Prints completed log sheet from teleradiography and submits to Radiologist, if applicable. Operations • Restocks linens and supplies and maintains the department in clean and orderly condition., • Transports patients, positions patients, and helps them on and off procedure table., • Performs patient charging activities on the day the service is rendered., • Applies shielding, supportive and immobilization devices and equipment., • Willingly lends knowledge and assistance to others upon request as needed and routinely as time is available, without prompting, so that all working time is used for departmental advantage., • Performs routine duties of clerical and support personnel in accordance with procedure when warranted to ensure continuity and quality of services., • Keeps supervisor informed on all responsibilities on an ongoing basis, ensuring prompt notification in the event of problems or potential problems., • Maintains an individual productivity rate equal to other co-workers., • Ability to push / retrieve images from the MRI console to PACS., • Maintain Joint Commission standards and any other regulatory agency standards., • Ability to teach and mentor fellow MRI Techs., • Takes call when necessary, • Any other duties as assigned. Qualifications • Accredited Program Radiologic Science Required and, • Minimum 3 years experience in MRI Required, • ARRT-R - ARRT Radiography, • ARRT-MR - ARRT Magnetic Resonance Imagin, • BLS - Basic Life Support, • ARC-BLS - Amer Red Cross Basic Life Support, • BLS-I - Basic Life Support - Instructor Closing Statement • Our people are passionate about what they do, the product they sell, and the customers they serve., • If you're looking for an opportunity to be an opportunity to be a part of a work family that values collaboration, innovation and dedication, we're the right company for you. Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Jacksonville, FL Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour based on experience, • Retention Bonus: $2000 paid every quarter within the first year., • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Dominique or text “Jacksonville MS4” to 904-541-9562 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure) Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 3 hours ago (5/13/2026 4:54 PM) Requisition ID 2026-201673 Location (Posting Location) : State/Province FL Location (Posting Location) : City JACKSONVILLE Location (Posting Location) : Postal Code 32220 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Job Description About the Role: The Mobile Automotive Technician at Pro Fleet Solutions plays a key role in keeping commercial and medium‑duty fleets operating at peak performance. Our technicians deliver high‑quality maintenance and repair services directly at customer locations, diagnosing and resolving issues efficiently outside a traditional shop environment. This role requires a skilled, adaptable professional who can work independently, manage their own schedule and inventory, and maintain strong communication with customers. As we continue to expand, we’re looking for experienced, motivated technicians committed to safety, precision, and reliability to join our mobile team and help deliver the convenience and trust our clients depend on. Rate of Pay: Flat Rate Pay Hourly ranges $25 to $35 per billable hour Responsibilities: • Perform on‑site diagnostics, maintenance, and repairs on commercial and medium‑duty vehicles, including engines, brakes, electrical systems, suspensions, starters, alternators, transmissions, and more., • Complete routine services such as oil changes, brake inspections, tune‑ups, tire rotations, radiator replacements, and minor body or component repairs (doors, steps, etc.)., • Deliver exceptional service by resolving on‑site issues efficiently, professionally, and with a focus on customer satisfaction., • Manage and maintain a mobile service vehicle stocked with necessary tools, parts, and diagnostic equipment to complete repairs efficiently., • Document all services performed, parts used, and customer interactions accurately using Shop Monkey., • Adhere to all safety protocols and industry standards to ensure a safe working environment for both the technician and customers., • Proficient in diagnosing and repairing issues such as starters, transmissions, alternators, and radiators., • Utilizes technical diagnostic skills daily to identify and resolve complex vehicle issues efficiently., • Strong mechanical aptitude and problem-solving abilities, • Proficiency with digital tools and mobile applications supports accurate documentation and streamlined service delivery., • Two years of mechanical automotive experience require with a strong background with medium-duty vehicles, particularly Freightliner, Ford Transit, and Dodge ProMaster, • Possession of a valid driver’s license with a clean driving record., • Valid driver’s license and reliable transportation required., • Previous experience working in a mobile automotive service role., • Ability to lift, carry, and move equipment or vehicle parts up to 50lbs as part of routine repair tasks., • Comfortable standing, bending, kneeling, or working in awkward positions for extended periods during diagnostics and repairs, • Ability to work outdoors in varying weather conditions, including heat, cold, rain, and snow, when servicing vehicles onsite., • Capable of operating hand tools, power tools, and diagnostic equipment safely and effectively, • Adequate vision, hearing, and manual dexterity to perform detailed mechanical and electrical work., • Ability to enter, exit, and maneuver around commercial and medium‑duty vehicles safely., • Must be able to drive and operate a mobile service vehicle for extended periods. Compensation details: 25-35 Hourly Wage PI2c6644c0c92f-25405-39851284

Job Description Communication is a vital part of the military’s ability to run successful missions. It’s the role of the Satellite Communication Systems Operator-Maintainers to ensure the lines of communication are always open, by installing, operating, and maintaining strategic and tactical multi-channel satellite communications. Duties of the Satellite Communication Systems Operator-Maintainer include: transmitting, receiving, and logging messages according to military procedures; encoding and decoding classified messages; operating telephone switchboards; installing, maintaining, and operating communications equipment; and monitoring and responding to emergency calls. Advanced Satellite Communication Systems Operator-Maintainers provide guidance on technical issues to other Soldiers; identify and report electronic jamming and deception; and apply appropriate electronic countermeasures. Job Duties • Conduct stressed and unstressed network operations, • Maintenance of satellite communications equipment and associated devices, • Prepare system and equipment related forms and reports Some of the Skills You’ll Learn • Use of various types of communication equipment, • Working with codes, • Maintenance and care of communications equipment Helpful Skills • Interest in communications equipment and satellite systems, • Ability to perform physically and mentally under pressure, • Ability to work as a team member Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Satellite Communication Systems Operator-Maintainer consists of 10 weeks of Basic Training, where you’ll learn basic Soldiering skills, and 18 weeks of Advanced Individual Training (AIT). Part of this time is spent in the classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are currently seeking a performance-driven, highly motivated leader to collaborate with our national practice area leadership team with the opportunity to grow into and oversee our regional practice. This is an exciting opportunity to expand on a well-established brand rich in legacy with existing clients and innovative projects. In this high-level role, you will provide management review and oversee a regional team including the development of business plans, pursuits and execute a wide variety of projects, organizational structures, and processes. As a management-owned private entity, we seek to reward our key leaders with ownership opportunities to drive overall performance and recognition. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As an Associate Managing Director I, you will build a staff, coordinate the execution of all Market Focus activities in your region and maintain client satisfaction. You will generate new revenue and increase existing revenue streams within your specific Market Focus. You will stay externally focused on developing and deepening your network of prospective clients and business partners, including architects and PM/CM firms, as well as key general contractors. You will track leads for major pursuits, forecast a pipeline of projects and develop winning strategies and teams. Additional responsibilities: • Stay abreast of your respective market both regionally and nationally and keep key team members at the technical forefront of this practice area, • Develop an appropriate network within the company to facilitate the identification and sharing of relevant information between our national team for staffing and project pursuits, • Focus on ensuring technical excellence of project delivery and providing expert resolution of issues, • Develop, review, and coordinate the regional practice area business plan in conjunction with the national market plan including coordinating the business plan with other practice areas, geographies, and services, • Coordinate goals with other members of the national team to help to execute business plans, • Develop strategies and tactics to explore and penetrate new clients to increase national sales and higher margin work, • Oversee project financials and interoffice / client reporting structure, • Develop and articulate the firm's value proposition in the market segment to develop a market distinction, • Lead and/or support sales presentations while focusing on selling integrated services, • Be an active leader and problem solver guiding our team and our partners to successfully deliver exceptional projects, • Write articles, white papers and speak at industry conferences and events The ideal candidate will possess the necessary leadership skills to oversee all efforts for clients, demonstrating an understanding of owner/client big picture business strategies and revenue goals, as well as the ability to foresee challenges. To succeed in this role, your technical expertise must be complemented by self-motivation, relationship building skills, effective communication skills, and the ability to effectively work in a fast-paced environment. The ideal candidate will be a recognized expert in your respective market focus within the industry. Additional requirements: • Bachelor's Degree in Electrical or Mechanical Engineering; exceptional candidates may substitute significant years of experience, • 15+ years of relevant market design experience, • Minimum of 7 years of management experience, • 7+ years' experience in developing business for engineering, or construction, • Thorough knowledge of MEP systems, • PE registration required., • Flexible to regional travel to sites within the East Coast; international occasion travel may be necessary, • Effective team player; ability to work independently or in a team environment As an Associate Practice Area Director with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend Syska Hennessy Group - Creating Exceptional Environments Let's Work Together! The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Syska wide Pay Range$98,043—$147,064 USD

Job DescriptionSalary: You deserve a job that you feel proud of, where you can channel your knowledge and skills into projects that positively affect communities, and where you design your own path. This is Alliant. Become an employee-owner of a growing engineering and consulting firm where we strive to provide a diverse and equitable culture of support and opportunities. Our success is driven by our employee-owners, and we're excited to have you be a part of it. The Impact You'll Have: Alliant Engineering, Inc. is actively seeking a creative and highly talented Director of Municipal Practicefor our Jacksonville, FL office. This position will lead internal growth of our Municipal Consulting Practice in northeast Florida and southeastern Georgia. As a Practice Leader, you will have authority to hire a support team and grow the practice through daily interactions with Cities, Counties and Utility Agencies in the regional market. Initial responsibilities will follow the seller/doer model with that role quickly transitioning primarily to a Client facing seller and internal team leader. You will have immediate support by our growing team of engineers and technicians in our Jacksonville and Tampa offices. As theMunicipal Practice Leadyou will have the opportunity to work on a wide variety of innovative and diverse projects, including the design of civil and municipal engineering projects for highways and local roads, public utilities and public works, parks, trails, and related infrastructure products. This position includes performing various tasks that may consist of developing construction plans and specifications, calculations, quality reviews, proposal and technical writing, and project management. The projects that the candidate may be assigned to may have complex and innovative features that will require mature judgment and knowledge. Responsibilities: • Plan and design civil engineering projects for both private and public infrastructure agencies., • Prepare engineering documents, including equipment schedules, cost estimates, materials, etc. in accordance with the latest governing codes., • Effectively manage budgets, schedules, and timely completion of projects., • Participate in pre-project presentations, interviews, and preconstruction meetings., • Prepare funding applications and preliminary engineer reports., • Oversee work-in-progress and monitor outstanding accounts receivable., • Lead personnel assigned to projects., • You will anticipate client needs, biases, and preferences and tailor communication and work output accordingly., • You will participate in and lead business development activities to new and existing clients through the following activities: plans, leads and participates in client meetings and networking events., • Develops new client contacts and relationships in all areas of expertise., • Identify, suggest, and secure projects from new and existing clients., • Strong knowledge of civil systems means and methods, materials, and industry standards., • Full understanding of all phases of engineering document production and the relationship between drawings and specifications. Qualifications: • Bachelors degree in Civil Engineering., • Professional Engineer (PE) license required., • 10+ years Municipal experience., • Knowledge of engineering principles and practices., • Strong working knowledge of position appropriate software including AutoCAD and Microsoft Office., • Experience with project management and budgeting., • Exceptional communication and interpersonal skills and the ability to work in a team atmosphere., • Ability to prioritize and handle multiple projects and clients. Benefits: At Alliant, we take care of our employees by offering a world class benefit package including: • Competitive Salary with Bonus Opportunities, • Market-Leading Profit Sharing, ESOP and 401k Contribution Programs, • Medical (with HSA Contribution), Dental, and Vision Plans, • Company Paid Life Insurance, Short-Term Disability and Long-Term Disability, • Flexible Spending Accounts for Medical and Dependent Care, • Wellness Programs and Competitions, • Generous Annual Leave and Compensatory Time Off Programs, • Flexible Schedules, • Casual Work Environment, • Paid Professional Development and Training, • Community Involvement/Charity Events, • Numerous Employee Focused Events (Lunch & Learns, Office Recreation Room, Off-Site Socials, Etc.) Who We Are: Recently named as one of Northeast Floridas Top Places to Work, Alliant Engineering, an employee-owned company, is a growing engineering, planning, landscape architecture, and surveying firm with a strong culture of quality, delivery, and innovation. Our employee owners are driven by a commitment to build better communities with excellence and passion. At Alliant we work hard; we have fun; and we love it. Within our Minnesota and Florida offices, we blend collaboration with integrity and forward-thinking to develop design solutions that address current needs and future aspirations. Internally, we strive to provide a diverse and equitable culture of support and opportunities. Then, it extends outwardly by giving back to charitable organizations in our communities. Alliant Engineering seeks straightforward people who value smart solutions, intelligent discussion, and a collaborative approach to achieving great things. Always humbly confident, we believe in creating work that speaks for itself. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future.

Job Description Job Type: Full-Time Schedule: Monday-Friday Location: Jacksonville, FL Pay Range: $80,000 - $84,000 - Eligible for the boot reimbursement and the ASE program Job Summary: The Shop Manager is responsible for working with the Corporate Maintenance Director, Terminal Manager, Maintenance Manager and Technicians to maintain and repair vehicles and to ensure the maintenance operations runs smoothly and to the standards of Student Transportation of America, State and Federal Regulations. Duties/Responsibilities: · Works directly with Terminal Manager in supervising maintenance staff (including hiring and disciplinary actions), coordinating and assists during leaves, evaluates performance, provides technical training and safety training. · Check repair orders, inspect completed work of mechanics/fuelers, file completed repair orders, and communicate with Dispatch on the availability of vehicles. · Assist in the troubleshooting and repair of mechanical problems. May train mechanics, recommend, and maintain correct mechanical procedures. · May arrange services and grounds keeping for building. · May order fuel and parts, maintain parts inventory and subcontract repair work. · Ensures fleet inspections and repairs are performed as outlined in the STA Policies and Procedures Manual and in accordance with State and Federal Regulation in both time and mileage intervals. · Ensures all defects noted on PM inspections and drivers defect reports are being repaired in a timely manner and no vehicle is released for use with any defects that affect the safe operation. · Prepares reports on work assignments and performs quality control inspections on completed repair work. Assists in tracking warranty and recall repairs. · Ensures staff maintains accurate and complete maintenance documentation and other records. · Must able to lift up to 50lbs and to operate all shop equipment and supervise other maintenance staff. · Ensures staff maintains a clean, safe shop. · Ensure that repairs and maintenance operations are handled in an efficient, cost-effective manner. · Assists in coordinating work schedules with operations. Helps develop and implement quality control programs. Provided technical advice as needed to other departments. · Performs research in maintenance techniques, write reports and memorandums as required. Assists in the evaluation for vehicle replacements. · Coordinates the use of outside vendors and verifies performance of those vendors. Provides technical assistance in the preparation of service contract and administers those contracts. · Audits and helps control the parts, tools and fuel inventories. Ensures the accuracy of those inventories and their support system. · Assist the Fleet Maintenance Management team with drafting and implementing policies and procedures. Provide recommendations concerning equipment requirements, specification and annual bus replacements. · Ensure environmental and safety compliance on a day-to-day basis with State, Federal, and Company requirements. · Ability to respond to after-hours and emergency situations when required. · May, on occasion, be required to drive as a substitute driver for any route or activity. · Performs other duties as required. Required Skills/Abilities-Essential Functions: · Knowledge of tools, procedures, technical skills and safety rules used in the maintenance and repair of gasoline, diesel, and alternative powered equipment. · Ability to operate a PC and learn software applications. · Written and verbal communication skills, and customer service skills are essential. Ability to deal with problems and find solutions. · Must have knowledge of Federal and State regulations including EPA and OSHA. · Operational knowledge of motorized gasoline, diesel and alternative fueled vehicles, and shop equipment and tools. · Scheduling and setting priorities for work to be accomplished. · Inspection of equipment and diagnose mechanical defects. · Propane/gasoline medium duty truck engine experience preferred · ASE Certification(s) a plus · Must be able to lift heavy equipment including brake drums, tires, ladders, tool chests, floor jacks, etc. when necessary. · Must be able to operate bench grinder, torch, drill press, jack and jack stands, Sawzall, oil pumps, power washer, parts cleaner and other hand tools required to perform work. · Attend work on a regular and dependable basis · Ability to successfully pass state and/or federal required Background Checks · Ability to perform the essential functions of the job · Ability to comply with all policies and procedures established by company · This is a safety sensitive job and all duties are regulated by the DOT. Education and Experience: · High School Diploma or equivalent supplemented by specialized vehicle and equipment repair courses. · Two to three years’ experience as a Technician in the school bus, trucking or heavy equipment environment, or any equivalent combination of education and experience. · Possession of a valid Driver’s License with CDL, passenger and school bus endorsement, or ability to obtain one in 90 days of employment. · Ability to regularly and safely lift heavy equipment over 50 lbs. frequently, and on occasion up to 100 pounds · Provide own hand tools required for regular maintenance. · Possession of a valid Commercial Driver’s License and DOT physical or must be able to attain within 3 months of hire. · Ability to safely lift heavy equipment (minimum of 50 lbs can be up to 100 pounds) frequently throughout the work day. · Provide own hand tools required for regular maintenance. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; Returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Must be eligible to work in the US without restrictions.

Apidel Technologies is seeking a local contract Medical Lab Scientist Level II for a local contract job in Jacksonville, Florida. Job Description & Requirements • Specialty: Medical Lab Scientist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Required Skills: • Florida State License, • ASCP OR AMT Certified, • Blood Bank, • Generalist Note: Candidates will be responsible for covering all relocation expenses independently, including travel (airfare), accommodation costs and any other costs. Job Description: • Responsibilities are interchangeable within job titles of medical laboratory scientist (MLS), medical technologist or clinical laboratory scientist., • Work environment/department will be listed in requirement. Determine the acceptability of specimens for testing according to established criteria., • Perform routine and complex technical procedures and functions according to departmental Standard Operating Procedures., • Monitor, operate and troubleshoot instrumentation to ensure proper functionality., • Demonstrate the ability to make technical decisions regarding testing and problem solving., • Prepare, test, and evaluate new reagents or controls. Report accurate and timely test results to deliver quality patient care., • Perform and document preventive maintenance and quality control procedures., • Identify and replenish testing bench supplies as necessary., • Assist with processing of specimens when needed. Maintain a safe work environment and wear appropriate personal protective equipment. Experience: • Bachelor's degree in Biology, Chemistry, Clinical Laboratory Science, Medical Technology or meet local regulatory (CLIA & State) requirements., • Minimum 2-4 years of clinical laboratory testing experience is required., • State Medical Technologist license required., • ASCP or AMT certification is required, • Proficient with computers; Familiarity with laboratory information systems is a plus., • High level of attention detail along with strong communication and organizational skills., • Flexibility to work overtime or other shifts depending on business needs. Apidel Technologies Job ID #API4307. About Apidel Technologies At Apidel Technologies LLC, we specialize in delivering high-impact healthcare staffing solutions that empower organizations to maintain operational excellence and deliver exceptional patient care. With our headquarters in Illinois and regional offices in New Jersey, California, and Georgia, we offer both nationwide reach and local insight to support the dynamic workforce needs of healthcare providers across the U.S. We deliver unmatched expertise in placing top-tier healthcare professionals, including Registered Nurses, Licensed Practical Nurses/Licensed Vocational Nurses, Certified Nursing Assistant/Certified Medical Assistant, and Nurse Practitioners, Medical Laboratory Scientist, Phlebotomist, Histologists, across a diverse spectrum of care settings such as hospitals, clinics, rehabilitation centers, long-term care facilities, correctional institutions, and more. Our deep talent network and sector-specific understanding position us as a valuable partner to client platforms, enabling a scalable and seamless workforce experience for healthcare employers and job seekers. Since our founding in 2012, Apidel has earned the trust of Fortune 500 healthcare organizations, mid-sized providers, and government agencies at the county and state levels. We provide end-to-end staffing services, contingent workforce solutions, direct hire, temp-to-hire, and executive search, designed to align with your clinical and operational objectives. As a certified WBENC firm, we are committed to Diversity, Equity, Inclusion & Belonging (DEI&B) and take a client-centric approach that combines industry insight, agile delivery models, and culturally competent staffing to help our clients thrive in today’s fast-evolving healthcare Benefits • 401k retirement plan, • License and certification reimbursement, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Sick pay

Job Description GENERAL PURPOSE OF JOB: The General Manager is responsible for ensuring that the center is run according to the required K1 standards. The General Manager also holds their Salaried and Hourly Staff accountable along with developing them to the next levels. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Staffing duties including: recruiting, interviewing, hiring, training, disciplining, and terminating, • Ensure facility complies with all OSHA guidelines as required in their location (varies from state to state), • Cash handling duties including preparation of tills, change fund maintenance, and preparation of deposits, • Ensure State Health inspection guidelines are completed, and in compliance with state regulations, • Ensure all State and Federal Permits and Licenses for the facility are up to date and in compliance, • Ensure Alcohol ordinance for your state is followed, to include retention of staff permits in accordance with State and Federal regulations., • Complete monthly retention of all work-related documentation, • Provide Corporate with all company invoices, to include all vendors, • Ensuring that cashier personnel adhere to correct cash handling procedures and sell effectively, • Ensuring that track personnel run races safely, efficiently and professionally, • Complete Manager Objectives each day as required in the companies Intranet, • Ensuring that mechanic personnel maintain our karts in peak working condition, • Ensuring that all staff are strictly adhering to company policies and providing outstanding customer service, • Corresponding with and providing regular reports to corporate office personnel, • Expanding the marketing and promotional presence of K1 Speed, • Maintaining the effective operational feasibility of the center, • Maintaining the highest standard of facility appearance, • Oversees the day- to-day operations within the policies and guidelines set forth by K1 Speed., • Identify on a regular basis their opportunities and creates an action plan to increase the performance level to the required K1 standard, • Ensures that their location has the proper staffing level to maximize the employee and guest experience., • Over sees weekly inventories of each location per company standards., • Maintain a professional K1 image including the Paddock lounge cleanliness, proper uniforms and appearance standards., • Ensures their location is keeping food cost, part costs and labor costs (hours) at or below K1 acceptable standards., • Ensures their location is consistently following the guidelines for private party events, • Provide timely information to sales team and Director or sales in-order to help book parties., • Understands and makes sure that each management team member follows all cash handling procedures including safe maintenance, deposits and all banking functions., • Responds to customer service needs to provide the highest standards of service within 24hours., • Executes weekly and monthly Marketing promotions to build the brand and generate revenue., • Works with their Team to review scheduling and effectiveness of all Marketing promotional hours and outings SKILLS AND ABILITIES: • Job Knowledge – Able to learn new skills and maintain up-to-date job-related information. Applies technical and procedural know-how to get the job done; understands job duties and responsibilities., • Initiative – Takes initiative versus waiting for direction. Results and goal oriented. Desires to excel on the job. Demonstrates self-confidence and positive attitude., • Professionalism – Consistently treats individuals with dignity and respect, recognizing the importance of cultural differences. Has and maintains a positive sense of humor and uses humor and uses humor appropriately. Embraces, communicates, and demonstrates company values and ethics. Maintains reasonable expectations of self and others when balancing time and performance demands with personal and professional needs., • Planning and Organizing – Develops realistic plans, setting reasonable completing times. Effectively uses time and resources. Prioritizes duties in a manner consistent with organizational objectives and emergencies., • Team Work/Cooperation – Successfully works with others to achieve desired results. Helps prevent/resolve conflicts. Develops positive working relationship with all people. Promotes mutual respect. Being pleasant with others on the job and displaying a good-natured cooperative attitude to bring teams of people together. Is flexible/open minded., • Critical Thinking – Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Overcomes obstacles. Helps team solve problems., • Productivity – Takes on additional responsibilities as needed. Manages priorities. Develops and follows work procedures., • Active Learning – Understanding the implications of new information for both current and future problem-solving and decision making. The ability to accept criticism and stay calm under pressure., • Communication – Communicating in a professional and empathetic way so employees understand what is expected of them. Effectively conveys and receives ideas, information and directions. Demonstrates good verbal and written communication. Paying attention to what people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times, • Customer Orientation – Listens, identifies, and responds, quickly and effectively to internal and external customers’ needs and sets work activities accordingly. Goes beyond what is expected and follows up to ensure customer satisfaction., • Work Quality – Demonstrates accuracy, thoroughness, and attention to detail., • Decision Making – Take calculated risks, make timely/responsive decisions. Modifies decisions based on new information, and takes ownership of the outcomes of each decision made., • Adaptability/Flexibility – Demonstrates judgment and willingness to make exceptions. Initiates or accepts changes in the process, while maintaining focus on the task/issue. Transitions effectively between multiple tasks on priorities. Meeting the needs of each customer without compromising the brand/business. EDUCATION and/or EXPERIENCE: High school diploma required Associates in Business or Hospitality preferred. Must be at least 21 years of age. Must have 5 plus years of Food and Beverage experience unless internal candidate Must have 7 years previous management experience with a successful track record, preferably in restaurant, entertainment or hospitality. PHYSICAL DEMANDS: This position requires that weight be lifted, pushed, pulled, safely for extended periods of time. Must be able to lift up to 100lbs with reasonable accommodation. WORK ENVIRONMENT: The work environment for this job typically has a high level of noise. The work will be performed predominantly indoors, however, things such as marketing events can be exposed to the outdoor elements. SUPERVISORY RESPONSIBILITIES: Responsible for managing several salaried and hourly employees. EQUAL OPPORTUNITY STATEMENT: K1 Speed is an equal employment opportunity employer and is committed to providing equal employment opportunity for all applicants and employees. K1 Speed does not unlawfully discriminate on the basis of race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, denial of medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. K1 Speed prohibits harassment of any individual on any of the bases listed above. **By applying to this position, you agree that you can perform the duties listed above.

At KARL STORZ, we are driven by a mission to enhance global health through innovative technology designed to tackle the most complex surgical procedures and medical challenges. Shift: Monday to Friday, 6AM-2:30PM One of the most rewarding ways to launch your career with us is by joining our Onsite Endoscopic Specialist (OES) team. In this role, you will be at the forefront of healthcare innovation, providing hands-on support for KARL STORZ advanced medical devices—ranging from hand instruments to state-of-the-art video equipment—within your assigned hospital. As an OES, you will collaborate closely with the Sterile Processing Departments and Operating Room teams, playing a critical role in ensuring the success of surgical procedures. This position is more than just a job—it is a gateway to an exciting and diverse career path. Whether you aspire to transition into medical device sales, advance into leadership, share your knowledge as an educator, or specialize in marketing, the opportunities for growth within KARL STORZ are limitless. With a commitment to internal development, we empower you to explore your passions, develop your skills, and propel your career to new heights. Join us and be part of a team dedicated to making a tangible impact on global health! Key Responsibilities: • Face-to-face customer support, including OR, SPD and Biomed, • Video tower/system set-up and support, • Inspection, repair, troubleshooting and replacement of KARL STORZ devices, • Monitoring, reporting, and facilitating repair/ exchange transactions, • Transporting, cleaning/sterilization and packaging of instruments after use, • Trouble shoot video and instrument issues in the O.R., • Instrument/equipment repair management Requirements: • A minimum of high school diploma or equivalent, • Experience in Sterile Processing, Sales, or other Surgical Technology/Medical role, • Our successful candidate will have excellent written and spoken English language business communication skills. They will also have demonstrated success working in a collaborative, service-oriented team environment., • Effective communicator, collaborative, and effective time management, • Possess exceptional organizational skills and the ability to multi-task, • MS Office - proficient user as the role will need to work with Excel spreadsheets and reporting, • Role requires the completion of a drug screening for safety-sensitive positions, • Must be able to lift/push/pull up to 25lbs Preferred Qualifications: • Associate's Degree and/or CRCST certification Key attributes of an exceptional OES: • Collaboration: Build strong, respectful relationships with team members, fostering an inclusive work environment and driving process improvements., • Critical Thinking & Problem Solving: Analyze situations to understand the "why" and "how," delivering solutions with professionalism., • Communication: Engage in clear, concise interactions with customers and colleagues, effectively conveying ideas and information., • Customer Service: Create an environment where customers feel valued, respected, and understood, building lasting business relationships., • Technical Proficiency: Utilize email, calendars, virtual collaboration tools, and spreadsheets to manage tasks, analyze data, and support business decisions. What is in it for you: • Relocation Support:, • Enjoy generous relocation reimbursement packages to ease your transition., • Professional Growth & Development:, • Receive financial support to obtain industry certifications (e.g., CST, CRCST)., • Get reimbursed for certification exam fees and study materials., • Take advantage of ongoing training and educational opportunities to advance your career., • Collaborative & Dynamic Work Environment:, • Engage in cross-functional collaboration and knowledge sharing., • Benefit from regular feedback, recognition, and support for your growth and development., • Be part of a team that celebrates successes together., • Access to Cutting-Edge Medical Technologies:, • Work with state-of-the-art medical equipment., • Collaborate with leading medical professionals., • Contribute to innovative solutions that improve patient care. Who we are: KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 2,600 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities succeed. With onsite locations and field opportunities across the country, we attract a diverse and talented staff. It's not just about the tools we create—it’s about the lives we change, together.

Job Description Jacksonville Housing is an equal opportunity/affirmative action employer. It is the policy and the intent of Jacksonville Housing to provide equality of opportunity in employment for all persons, and in all aspects of its personnel policies, programs, practices, operations, and in all its working conditions and relationships with employees and applicants for employment. Recruitment, hiring, assignment, training, compensation, promotion, retention, and disciplinary decisions will be made without regard to race, color, religion, creed, national origin, sex, sexual orientation, age, disability, genetic information, veteran status, or any other protected class status applicable under local, State of Florida or federal law. POSITION Job Title: Maintenance Mechanic FLSA Classification: Non-Exempt EEO Classification: Skilled Craftsman Salary/Pay Grade: $15.00 Reports to: Foreman Job Description Job Summary Responsible for performing a variety of semi-skilled and skilled structural, plumbing, and electrical building maintenance work at authority properties. Work involves the repair and replacement of items such as windows, doors, roofs, gutters, cabinets, walls, ceilings, toilets, faucets, water lines, electrical outlets, and light fixtures. Also performs preventive maintenance tasks. Essential Job Functions • Perform semi-skilled work in several trade areas in the maintenance and repair of buildings and/or equipment. May specialize in a particular trade or perform work in several trades. Install, maintain, repair, or replace mechanical equipment, appliances, and portable electrical equipment., • Assist in the installation, maintenance, repair, or replacement of valves, sinks, wash bowls, sewers, and other sanitary fixtures., • Perform a variety of brick, cement, and carpentry work., • Replace damaged or broken windows, patch drywall, and prepare and paint interior and exterior surfaces., • Remove and replace floor tile., • Perform electric and acetylene welding and brazing., • Assist in the installation, maintenance, and repair of heating and air conditioning equipment and hot water heaters., • Assist in the installation, maintenance, or repair of electrical fixtures, switches, and relays., • Operate a motor vehicle in the performance of duties. MINIMUM QUALIFICATIONS Education and Experience High School Diploma or GED General Education Diploma Must have the ability to read, write and follow instructions in English. Must have had at least two years of experience in the repair and maintenance of buildings, plumbing, and/or mechanical or electrical equipment; carpentry, plastering/drywall, installation, painting, and/or tile work. Satisfactory completion of a vocational/technical course in electrical or mechanical repair or a related field may be substituted for one of the required years of experience Required Knowledge, Skills, and Abilities • Knowledge of HUD regulations regarding housing quality standards and other maintenance-related standards., • Knowledge of Jacksonville Housing policies and procedures, • Knowledge of the physical layout of the site properties., • Knowledge of safety rules, including accident causation and prevention., • Knowledge of occupational hazards and appropriate safety precautions., • Ability to analyze information from inspections in order to determine the maintenance needs, and the quality of maintenance services provided., • Ability to communicate effectively orally and in writing., • Ability to establish and maintain effective working relationships with supervisors, subordinates, co-workers, residents, contractors, and the general public., • Ability to understand oral and written instructions. Core Competencies Commitment: Sets high standards of performance; pursues aggressive goals and work hard/smart to achieve them; strives for results and success conveys a sense of urgency and brings issues to closure and persists despite obstacles and opposition. Customer Service: Meets/exceeds the expectations and requirements of internal and external customers; identifies, understands monitors, and measures the needs of both internal and external customers; talks and acts with customers in mind; and recognizes working colleagues as customers. Effective Communication: Ensures important information is passed to those who need to know; conveys necessary information clearly and effectively orally or in writing; demonstrates attention to, and conveys an understanding of, the comments and questions of others; and listens effectively. Demonstrates a clear understanding of Jobs Plus Program and ability to highlight goals and benefits to residents. Responsiveness and Accountability: Demonstrates a high level of conscientiousness; hold oneself personally responsible for one's own work and does a fair share of work. Teamwork: Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; contributes to building a positive team spirit; puts success of team above own interests; supports everyone's efforts to succeed; attends, supports, and participates in all team building exercises and events. Adaptable/Flexible Skills: Ability to work additional hours if required and work with pressing deadlines and is task oriented. Proactively seeks work assignments when current assignments are completed—takes initiative. Physical Demands Work is principally physical. The work involves normal risks or discomforts associated with a skilled craftsman environment. Must be able to repeatedly lift and pull up to 50 lbs., bend, kneel, reach, stand, walk, push, pull, lift, grasp, feel, talk, hear, see, use repetitive motions, climb ladders, and other strenuous activities. Must be able to work in adverse Florida weather which includes extreme heat and humidity in the summer, and cold in the winter. Much of the work will be done in environments that do not have air conditioning or heating. May be subject to fumes, odors, dust, gases, poor ventilation, intense noise, extreme temperatures, and travel. Other: Must possess a valid driver’s license and be insurable by Jacksonville Housing. Position Reports to Property Manager/ Foreman Leadership Accountability None Supervisory Accountability None Organizational Accountability None Financial Accountability None Customer Accountability Interfaces with customers internally and externally. We anticipate hiring at the minimum of the respective pay grade per contractual obligations. We are an EOE & DFWP. A successful applicant will be required to pass a background check including but not limited to employment history, criminal record, and driving record, and may be subject to a pre-employment drug screening. This job description should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of this job classification. All incumbents may not perform all the job duties listed, and some incumbents may perform some duties which are not listed, and incumbents may be requested to perform job-related responsibilities and tasks other than those stated in this description.

Job DescriptionDescription: Job Title: Hotel Maintenance Technician (Drywall & Painting experience) Location: Jacksonville, Florida 32207 Employment Type: 2 months project/ $17.00/hour Position Overview: We are looking for a skilled Hotel Maintenance Technician with experience in drywall repair, painting, and general handyman tasks. As part of our maintenance team, you will play a critical role in ensuring that our hotel maintains a high level of guest satisfaction through timely repairs and property upkeep. Key Responsibilities: • Perform drywall repairs and patching throughout the property, • Conduct painting and touch-ups to maintain hotel appearance, • Handle general handyman tasks, including fixing doors, light fixtures, furniture, and other hotel fixtures, • Respond promptly to guest or staff maintenance requests, • Inspect and maintain hotel rooms and public areas for safety and appearance, • Maintain records of repairs and completed projects Puesto: Técnico de Mantenimiento de Hotel (Experiencia en Drywall (yeso) y Pintura) Ubicación: Jacksonville, Florida 32207 Tipo de empleo: Proyecto de 2 meses / $17.00/hora Descripción del puesto: Buscamos un Técnico de Mantenimiento de Hotel cualificado con experiencia en reparación de drywall (yeso), pintura y tareas generales de mantenimiento. Como parte de nuestro equipo de mantenimiento, desempeñará un papel fundamental para garantizar que nuestro hotel mantenga un alto nivel de satisfacción de los huéspedes mediante reparaciones puntuales y el mantenimiento de la propiedad. Responsabilidades clave: Realizar reparaciones y parches de drywall en toda la propiedad. Realizar trabajos de pintura y retoques para mantener la apariencia del hotel. Realizar tareas generales de mantenimiento, incluyendo la reparación de puertas, lámparas, muebles y otros elementos del hotel. Responder con prontitud a las solicitudes de mantenimiento de los huéspedes o del personal. Inspeccionar y mantener las habitaciones y áreas públicas del hotel para garantizar su seguridad y apariencia. Mantener registros de las reparaciones y los proyectos completados. Requirements: • Previous maintenance experience (hotel or hospitality industry a plus), • Basic knowledge of plumbing, electrical, and general repairs, • Ability to work independently and with a team, • Good communication and problem-solving skills, • High school diploma or equivalent; technical training a plus, • Must be able to lift 50 lbs and be on your feet for extended periods

Job Description Maintenance Technician Blue Roc Premier is actively searching for a seasoned and skilled Maintenance Technician to become a valuable addition to our team. We prioritize the growth and development of our staff, offering an outstanding training program aimed at cultivating strong leadership abilities in you. As a Maintenance Technician you will play a crucial role in ensuring the smooth operation and maintenance of our communities. The ideal candidate will have a minimum of 3 years of experience in a multi-family setting, possess excellent technical skills, and be committed to maintaining high standards of safety and cleanliness. Your daily job: • Maintenance Repairs: Conduct general maintenance repairs and ensure the functionality of various systems within the property., • Unit Preparation: Prepare vacant units for new residents, ensuring they meet the standards for move-in., • Technical Expertise: Utilize HVAC 608 Certification and demonstrate proficiency in electrical and plumbing tasks., • Safety and Cleanliness: Maintain a clean and safe work area, ensuring the community operates according to safety standards., • Communication: Effectively communicate with residents, fellow associates, vendors, and supervisors to address maintenance issues promptly., • HVAC 608 Certification is a MUST., • Minimum of 3 years of experience in multifamily property maintenance and team supervision., • Electrical and plumbing knowledge, • Detail-oriented with the ability to work in a fast-paced environment, • Effective communication skills with residents, associates, vendors, and supervisors, • Detail-oriented with a focus on resident satisfaction., • Effective communication skills., • Knowledge of preventive and general maintenance., • College degree helpful., • Dedication to delivering exceptional customer service., • Valid Driver's License., • Competitive salary, • Comprehensive insurance coverage to include Medical, Life, Dental, Vision, Long and Short-Term Disability, • Paid vacation, • Competitive bonus structure, • 401K Retirement Plan, • rent discount Background screening is required We are an equal opportunity employer. Técnico(a) de Mantenimiento Blue Roc Premier está buscando activamente un(a) Técnico(a) de Mantenimiento con experiencia y habilidades para convertirse en una valiosa adición a nuestro equipo. Priorizamos el crecimiento y desarrollo de nuestro personal, ofreciendo un programa de capacitación excepcional enfocado en desarrollar sólidas habilidades de liderazgo. Como Técnico(a) de Mantenimiento, desempeñará un papel clave para garantizar el funcionamiento eficiente y el mantenimiento adecuado de nuestras comunidades. El candidato ideal contará con un mínimo de 3 años de experiencia en propiedades multifamiliares, excelentes habilidades técnicas y un fuerte compromiso con altos estándares de seguridad y limpieza. Sus funciones diarias: * Reparaciones de mantenimiento: Realizar reparaciones generales y asegurar el correcto funcionamiento de los distintos sistemas de la propiedad. * Preparación de unidades: Preparar unidades vacantes para nuevos residentes, asegurando que cumplan con los estándares de mudanza. * Experiencia técnica: Utilizar la certificación HVAC 608 y demostrar dominio en trabajos eléctricos y de plomería. * Seguridad y limpieza: Mantener un área de trabajo limpia y segura, garantizando que la comunidad opere conforme a las normas de seguridad. * Comunicación: Comunicarse de manera efectiva con residentes, compañeros de trabajo, proveedores y supervisores para resolver oportunamente los asuntos de mantenimiento. * Trabajo en equipo: Colaborar con el equipo de servicio para mejorar la apariencia exterior (curb appeal) y mantener altos estándares en la propiedad. Requisitos: * Certificación HVAC 608 (obligatoria). * Mínimo de 3 años de experiencia en mantenimiento de propiedades multifamiliares y supervisión de equipos. * Conocimientos en electricidad y plomería. * Orientación al detalle y capacidad para trabajar en un entorno dinámico. * Habilidades efectivas de comunicación con residentes, asociados, proveedores y supervisores. * Conocimiento de mantenimiento preventivo y general. * Título universitario (preferible). * Compromiso con brindar un servicio al cliente excepcional. * Licencia de conducir válida. * Bilingüe es un plus. Lo que ofrecemos: * Salario competitivo. * Paquete integral de seguros que incluye médico, vida, dental, visión, discapacidad a corto y largo plazo. * Vacaciones pagadas. * Estructura de bonos competitiva. * Plan de jubilación 401(k). * Descuento en renta. Se requiere verificación de antecedentes. Somos un empleador que ofrece igualdad de oportunidades.

Job Description Maintenance Technician – The Grove at Deerwood | Jacksonville, FL Who We Are: Founded in 1975, CONAM Management operates in 10 states, across 26 key metropolitan markets, supporting over 60,000 apartment units of both affordable and conventional housing. Our growing team of over 1,700 associates is dedicated to maintaining and enhancing the quality of life for our residents. At CONAM, we foster a collaborative, team-oriented culture where our associates thrive and are valued for their expertise and commitment. What We Are Looking For: We are seeking a skilled Maintenance Technician to join our team at The Grove at Deerwood in Jacksonville, FL. As part of our maintenance team, you'll play a crucial role in ensuring the operational excellence and curb appeal of the apartment community, delivering superior service to our residents, and supporting the maintenance team in all aspects of Property Management Maintenance to include upkeep, repairs, and turnovers. This is a full-time position with full benefits. Pay range: $23.00 - $25.00 per hour Key Responsibilities: • Perform routine preventative maintenance on equipment and systems, including HVAC, plumbing, electrical, and appliances, to ensure optimal performance and reduce downtime., • Address resident service requests related to apartment maintenance, including plumbing, electrical, HVAC, and appliance issues, ensuring all issues are resolved quickly and professionally., • Oversee turnovers, conducting inspections, repairs, and cleaning to prepare units for new residents, ensuring each apartment is move-in ready., • Maintain the community’s curb appeal, including landscaping and exterior maintenance, to ensure the community reflects high standards of cleanliness and attractiveness., • Support a team-oriented culture by collaborating with other technicians, contractors, and property management team members in the upkeep of the multi-family complex., • Participate in an on-call rotation to provide after-hours emergency maintenance services as needed., • Ensure compliance with safety regulations and operational standards in all maintenance activities., • Additional duties as required. Who You Are: (Requirements of the Position) • Experience: Minimum of 1-2 years of hands-on experience in apartment maintenance or equivalent, including proficiency in plumbing, electrical systems, HVAC, appliance repair, and general carpentry., • Technical Skills: Ability to operate and maintain various hand tools and power equipment, such as drills, saws, grinders, electrical testers, HVAC systems, and plumbing tools., • Problem-Solving Skills: Strong troubleshooting abilities to quickly assess and resolve maintenance issues, ensuring minimal disruption to residents., • Communication: Excellent verbal and written communication skills to interact with residents, team members, and vendors effectively., • Customer Focus: A passion for delivering exceptional service to residents and creating a positive living experience., • Flexibility: Willingness to work a flexible schedule and participate in an on-call rotation to handle apartment maintenance emergencies. Our benefits include: • Medical, dental, vision insurance, • Pet insurance, • Life insurance and identity theft protection, • Paid sick and vacation time, • 401(k) plan with company match, • Flexible Spending Accounts (FSAs), • Employee Assistance Program (EAP) Additional Information: • This position is contingent upon passing a background check, employment verification, pre-employment physical, and drug screening., • CONAM will consider qualified applicants with criminal histories in a manner consistent with the requirement of the law. Pay Bands: Pay bands are established based on geographic location, internal equity, market conditions, and candidate qualifications. We provide competitive compensation based on experience and qualifications.

Job Description MISTRAS Group, Inc. is seeking Full time Level II MT/PT/UT/VT Technicians willing to train in the NFPA qualifications for the Hose, Aerial, Pump, Ladder testing background which accompanies these skills in the Fire/Emergency Services Market. Additionally the High Angle Rescue emphasis for Training, Equipment Sales & Support in PA, MI, FL, OH, LA, MS. Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT, • Set up and calibrate equipment, • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document, • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I, • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the, • Work with minimal, • Identify and resolve problems in a timely, • Obtain and analyze information, • High School graduate or equivalent, • Graduate of a specialized NDT technical program meeting SNT-TC1A for the following is required: MT/PT/UTT, • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A, • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information, • Oral Communication ~ Speak clearly and persuasively in positive or negative, • Written Communication ~ Edit and present numerical data, • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time, • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected, • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve, • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure, • Safety ~ actively promotes safety procedures; use all equipment and materials #LI-KM1

Fusion Medical Staffing-Therapy is seeking a travel Physical Therapist for a travel job in Fruit Cove, Florida. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Travel Physical Therapist (PT) Company: Fusion Medical Staffing Location: Facility in Fruit Cove, Florida Job Details Fusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Fruit Cove, Florida. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • Valid Physical Therapy license in compliance with state regulations, • Current BLS certification (AHA/ARC)Preferred Qualifications:, • Doctorate degree in physical therapy, • Physical Therapy experience, but New Grads are welcome to apply, • Evaluate patients’ physical conditions using standardized tests, clinical examinations, and patient history to identify functional limitations and treatment need, • Develop personalized rehabilitation programs based on assessment findings and patient goals, • Implement physical therapy treatment plans using various techniques to improve patient mobility and reduce pain, • Operate specialized physical therapy equipment and modalities safely and effectively, ensuring proper maintenance and calibration of devices, • Assess patient progress, adjust treatment plans as necessary, and accurately document evaluations, interventions, and outcomes in the medical record, • Work closely with physicians, nurses, occupational therapists, and other healthcare professionals to ensure coordinated care and optimize treatment outcomes, • Educate patients and caregivers on home exercise programs, proper body mechanics, injury prevention strategies, and self-management techniques to promote long-term functional recovery, • Maintain a safe treatment environment by adhering to infection control protocols, safety guidelines, and regulatory standards while addressing patients’ comfort needs during therapy sessions, • Engage in quality assurance initiatives and professional development activities to remain current with best practices in physical therapy, • Collaborate in discharge planning to ensure smooth transitions and continued patient progress in community or home-based settings, • Perform other duties as assigned within scope of practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Therapy Job ID #1893734. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Therapy With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. Benefits • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education

Job Description Employment Type: Full-Time Location: Jacksonville, FL Division/Department: Maintenance Available vacancies: 001 Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting Structure The position reports directly to the Director of Maintenance. Shift hours: FOR MRO ONLY Core Competencies • Accountability, • Attention to detail, • Problem-solving, • Effective communication, both verbal and written, • Confidentiality, • Excellent investigation and critical-thinking ability, • Judgement, • Professionalism, • Organization and time management skills Key Performance Indicators / Duties & Responsibilities: * • Assign and schedule tasks to technicians based on skill set, as directed by the Lead Technician/Program Manager and in accordance with Avmax's policies and procedures., • Execute the project plan for your area of expertise as provided by the Lead Technician/Program Manager., • Manage the work scope for your area of expertise within the project budget as set out by the Lead Technician/Program Manager., • Review work cards for your area of expertise and ensure that the Work Package reflects the actual status of the project., • Carry out tasks on the aircraft when all other Lead duties are accomplished., • Provide technical assistance and guidance to the technicians on the crew., • Responsible to ensure that all crew members' paperwork is up-to-date and accurate and maintain integrity of all issued documents., • Verify daily time cards and biweekly computerized reporting for payroll., • Responsible to ensure that crew members are billing their time to projects appropriately and that all time is accounted for., • Responsible to ensure crew members are working productively throughout the duration of their shift., • Responsible to ensure crew members follow Avmax's policies and procedures including evaluating the quality of work with his/her team. Make certain his/her team members comply with Avmax's safety policies and procedures., • Responsible to ensure work environment is safe and clean, and maintain work area and equipment in a clean and orderly condition., • Review and be fully familiarized with all aspects of Avmax's Maintenance Policy Manual and General Procedures Manual. Compliance with both manual's policy and procedure are mandatory., • Demonstrate ability to work well with other individuals throughout the organization., • Promote company values, vision, and mission., • Attend training courses as directed by company management., • Demonstrated capability and competency in field of expertise., • Excellent oral and written communication skills., • Demonstrated ability to work well with other individuals throughout the organization., • Possesses strong fundamental aircraft knowledge., • Strong leadership skills and the ability to effectively manage employees., • Demonstrated ability to work with predictive budgets., • 3-5 years' experience in the aviation field. Our recruitment commitments: • We thank all applicants for their interest; however, only those selected for an interview will be contacted., • Depending on qualifications, selected candidates may be offered a role at a more appropriate level., • Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan., • Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups., • Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Job Description Electrical Manufacturing Technician Position Type: Full-time, Non-Exempt, Hourly Reports to: Electrical Superintendent Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Essential Functions: • Set electrical switchgear, panels, controllers, wireways, trays etc., • Read and understand electrical drawings and schematics., • Install electrical conduit and wiring on modular chiller systems per plans., • Terminate high and low voltage wiring., • Construct supports and infrastructure for electrical equipment., • Oversee and organize electrical tool room., • Troubleshoot electrical tools, welders, and grinders., • Able to research replacement electrical parts., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical capacity with attention to detail., • Excellent communication skills, both oral and written., • Problem solving., • Exceptional organizational skills., • Time management. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is frequently required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience • Basic math and language skills required., • 2+ years of commercial or industrial electrical installation., • Knowledge concerning transformers, LVMCC, HVMCC, etc., • Good understanding of the National Electrical Code. Preferred Education and Experience • 3+ years of commercial and industrial electrical installation Must have dependable transportation, valid driver’s license, clean back-ground check and random drug screening consent. Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Job Title: Building Maintenance Technician (All-Around) Department: Facilities / Maintenance Reports to: Facilities Maintenance Manager / Operations Manager FLSA: Non-Exempt • Possess a valid TWIC., • Must have a valid driver’s license and 3 years of driving history that is acceptable to the company's auto insurance carrier., • Steal toe boots/shoes., • Have excellent written and verbal communication skills., • Able to follow verbal and written instructions. We are seeking a skilled and versatile Building Maintenance Technician to perform a wide range of maintenance, repair, and improvement tasks across our facilities. The ideal candidate will have hands-on experience in multiple trades, including electrical work, plumbing, carpentry, welding, and general building maintenance. This role requires a dependable professional with strong problem-solving skills and the ability to work independently or as part of a team to ensure facilities remain safe, functional, and well-maintained. Essential Duties and Responsibilities: • Perform daily repairs on warehouse equipment, dock levelers, roll-up doors, etc., • Perform daily, routine, and preventive maintenance on building systems, equipment, grounds, and terminal., • Troubleshoot and repair electrical systems, wiring, fixtures, and lighting as required., • Install, maintain, and repair plumbing systems, including pipes, faucets, valves, drains, and fixtures., • Perform light welding and repair of HVAC, mechanical, and other facility-related systems as directed., • Respond to work orders, service calls, and emergency maintenance issues promptly and effectively., • Maintain tools, equipment, and work areas in a clean, safe, and orderly condition., • Keep accurate records of maintenance activities and of scheduled maintenance procedures., • May assist in performing minor and major building and equipment repairs., • Assist with facility improvement projects, renovations, and upgrades., • Works on miscellaneous projects as needed., • Perform other duties as assigned to support the overall maintenance and operation of facilities and terminal., • Leads by example in demonstrating proper maintenance procedures., • Able to function independently, exercise sound judgment, and demonstrate initiative and tact in handling all the above responsibilities., • Adhering to the Company’s safety policies and procedures, those set out by OSHA., • Inform the supervisor of unsafe situations, • Anticipated percentage of travel - 0%-5%., • Additional duties as assigned. Education & Experience Requirement: • High school diploma or GED required: Technical/vocational school training preferred., • Minimum of 3 – 5 years of relevant experience in building maintenance or a skilled trade (electrical, plumbing, carpentry, and welding), • Experience working in an industrial warehouse, port terminal or commercial facilities preferred., • Knowledge and willingness to perform all responsibilities of each position within the team. Education & Experience Requirement: • Broad knowledge of building systems and multiple trades (electrical, plumbing, carpentry, welding)., • Ability to read and interpret technical manuals, diagrams, and blueprints., • Strong troubleshooting and problem-solving abilities., • Excellent interpersonal skills, respectful and kind to self and others., • Presents a professional, positive, and helpful attitude always when interacting with customers and co-workers., • Resourceful, well-organized, and dependable., • Effective communication and organizational, and teamwork skills, • Ability to communicate with diverse personalities., • Strong attention to detail., • Ability to work independently and prioritize multiple tasks., • Intermediate computer skills, Microsoft systems, Outlook. Competencies: • Verbal comprehension Understand oral and written communications, both general and technical. Physical Demands/Work Environment: • Ability to regularly stand, walk long distances, and talk and hear., • Ability to frequently use hands and arms to grab, handle, or feel, and reach., • Ability to occasionally sit and stoop, kneel, crouch, climb, or crawl., • Ability to occasionally climb ladders or stairs., • Ability to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 150 pounds, with assistance or lifting machinery as necessary., • Must wear Seaonus required safety PPE, Safety vest, hardhat, gloves, etc., • Vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Working indoors and outdoors., • Excessive heat or cold, extreme weather conditions, excessive humidity or dampness, or chilling. Work Schedule: Hours may vary from Monday to Friday, with overtime, weekends, and holidays as needed. Work can occur for 6 or 7 consecutive days.

Doctor of Medicine | Anesthesiology - General/Other Location: Jacksonville, FL Employer: Aya Locums Pay: $200 to $210 per hour Shift Information: 8 hours Contract Duration: 13 Weeks Start Date: 6/1/2026 About the Position Aya Locums has an immediate opening for a locum Certified Registered Nurse Anesthetist (CRNA) job in Jacksonville, FL paying $200/hour - $210/hour. Job Details: Position: Certified Registered Nurse Anesthetist (CRNA) Start Date: 06-01-26 Length: 13 weeks Schedule and Coverage: Shift Coverage: Scheduled + No Call Shift Schedule: Standard 1, 8-Hour 08:00 • 17:00 About the Facility: Facility Type: Out-Patient Clinic About Certified Registered Nurse Anesthetist (CRNA) Jobs: This is a generalized description of locum CRNA job requirements. Specific assignment details may vary based on the healthcare facility, patient population and the scope of the role. General Job Responsibilities: Provide anesthesia care to patients undergoing surgery, including preoperative assessment, intraoperative anesthesia management and postoperative pain management. Collaborate with surgeons, surgical teams and other healthcare providers to ensure optimal patient outcomes. Monitor patient vital signs and adjust anesthetic plans as needed. Respond to emergencies and provide critical care interventions. Maintain accurate and complete medical records. Stay current on the latest advancements in anesthesia practice through continuing education. Skills: Clinical expertise and technical proficiency in administering various anesthesia techniques. Strong critical thinking and decision-making skills. Excellent communication and collaboration skills to work effectively with a surgical team. Exceptional attention to detail and the ability to adapt to changing patient conditions. Strong work ethic, stamina and ability to perform effectively in a fast-paced environment. Minimum Education Requirements: Master of Science in Nursing (MSN) or Doctorate in Nursing Practice (DNP) from an accredited CRNA program. License & Certifications: Active and unencumbered advanced practice registered nurse (APRN) license in Florida. National certification as a CRNA by the National Board of Certification and Recertification for Nurse Anesthetists (NBCRNA). Experience: While specific requirements may vary, most locum CRNA positions prefer candidates with at least one year of experience in a clinical anesthesia setting. Additional Notes: Locum tenens CRNA positions are temporary assignments, often lasting weeks or months, to fill staffing gaps in healthcare facilities. These positions offer competitive pay and flexible schedules, allowing CRNAs to pursue diverse work environments and control their workload. With Aya Locums, you get: Access to top hospitals and healthcare systems in diverse care settings. Highly competitive, transparent locum tenens pay. Dedicated application and assignment support. In-house credentialing and licensing teams. Travel and lodging coverage. Easy timekeeping and streamlined management of documents. Malpractice coverage and risk management support. Aya may provide other benefits where required by applicable law, including but not limited to reimbursements. For all employees and employee applicants, Aya is an Equal Employment Opportunity ("EEO") Employer, including Disability/Vets, and welcomes all to apply. #CRNA

Job Description General Manager – HVAC Service Operations Lead. Grow. Build a High-Performing Service Organization. We are looking for an experienced General Manager to lead and grow a high-performing HVAC service operation in North Florida. This role is responsible for the overall performance of the service division, including P&L ownership, operational leadership, business growth, and customer success. You will lead a team of technicians, coordinators, and office staff while working closely with sales leadership to expand service agreements, drive revenue growth, and strengthen long-term client relationships. This is an opportunity for a proven operations leader to scale a growing service business, improve operational efficiency, and build a strong regional presence. What You'll Do Business Leadership • Own the full P&L for the service division, including revenue, margins, and profitability, • Drive business growth and market expansion across the North Florida region, • Lead operational strategy and performance improvement initiatives, • Oversee day-to-day operations of the service and preventative maintenance business, • Optimize technician utilization, dispatching, and labor planning, • Ensure service agreements are delivered profitably and efficiently, • Partner with the sales team to develop and close large service opportunities, • Lead service agreement renewal and retention strategies, • Lead and develop a team of technicians, service coordinators, and office staff, • Recruit, mentor, and retain top service talent, • Oversee fleet management, service inventory, and equipment planning, • Ensure compliance with EPA regulations related to refrigerant handling, • Support smooth handoffs between construction/project teams and service operations What We're Looking For • 5–7+ years of leadership experience in HVAC service, mechanical contracting, facilities services, or similar technical service industries, • Strong P&L management and operational leadership experience, • Proven success managing field technicians and service teams, • Experience growing service agreements and customer retention programs, • Strong understanding of dispatching, service operations, and labor planning, • Experience with ERP/CRM systems and operational reporting tools, • Excellent leadership, communication, and customer relationship skills Why This Role is Exciting • Lead a high-impact leadership role with full operational ownership, • Opportunity to grow and scale a regional service business, • Work with a strong field team and established customer base, • Make a direct impact on revenue growth, operational performance, and team development

Job Description Workplace Type: Hybrid About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About the Role: As a Director of Transmission & Distribution Services, you will be responsible for overseeing transmission and distribution operations. Responsibilities will include setting the direction for the teams, the overall quality and timeliness of work produced, monitoring short-term and long-term workload, group adherence to standards and procedures, coaching and developing employees, sponsoring initiatives for process improvements, and client management and new client development. This role will also be involved in business development across the U.S. to obtain clients and projects for transmission and distribution engineering. What You Will Be Doing: • Ability to maintain transmission and distribution client relationships and develop new ones, • Manage/supervise transmission and distribution engineers and designers across multiple regional offices, • Assist with building of teams across multiple offices by helping to identify and interview candidates, • Assist with opening of new regional offices, • Oversee the development of internal transmission and distribution engineering standards, processes, and procedures, • Participate in strategic growth planning and company initiatives, which may include establishing business strategies and objectives, • Ability to support the roles and responsibilities of the transmission and distribution engineering manager, when necessary, • Assist with developing and achieving transmission and distribution engineering annual revenue and growth goals What You Bring: • BS or MS in Engineering (required), • Minimum 15 years of experience in a combination of transmission and distribution engineering, utility consulting, project management, and business development (required), • Professional engineering licensure (required), • Project Management Professional (PMP) certification (preferred), • Experience managing staff and projects as a project manager and/or client lead, • Ability to travel up to 20% and work outside normal business hours, • Excellent written and communication skills, • Ability to communicate technical matters in an understandable and efficient manner, • Ability to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy So...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • VTO (Volunteer Time Off) of 4 hours each year (prorated during first year based on hire date), • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance (Employer paid), • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

CrossMed Healthcare is seeking an experienced Cath Lab Tech for an exciting Travel Allied job in Orange Park, FL. Shift: 12 hr days Start Date: ASAP Duration: 13 weeks Pay: $2232 / Week Job Details • Gross Weekly Pay: $2124.00 - $2232.00, • Starts: 2026-04-13, • Assignment Length: 13 Weeks, • Shift: Day shift, • Hours Per Week: 40, • Job Quantity: 2, • Type: Travel, • City: Orange Park Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication with other health team members, • Provides and coordinates patient care, • Follows hospital safety rules and procedures, • Maintains cleanliness of rooms and adequate stock of supplies, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

CrossMed Healthcare is seeking an experienced Cath Lab Tech for an exciting Travel Allied job in Orange Park, FL. Shift: 12 hr days Start Date: ASAP Duration: 13 weeks Pay: $2480 / Week Job Details • Gross Weekly Pay: $2360.00 - $2480.00, • Starts: 2026-04-13, • Assignment Length: 13 Weeks, • Shift: Day shift, • Hours Per Week: 40, • Job Quantity: 1, • Type: Travel, • City: Orange Park Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication with other health team members, • Provides and coordinates patient care, • Follows hospital safety rules and procedures, • Maintains cleanliness of rooms and adequate stock of supplies, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

Fusion Medical Staffing is seeking an experienced CT Tech for an exciting Travel Allied job in Orange Park, FL. Shift: Inquire Start Date: 05/25/2026 Duration: 12 weeks Pay: $1763 / Week Company: Fusion Medical Staffing Location: Facility in Orange Park, Florida Job Details Fusion Medical Staffing is seeking a skilled CT Tech for a 12-week travel assignment in Orange Park, Florida. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as a CT Technologist, • Valid Radiology license in compliance with state regulations, • Current BLS certification (AHA/ARC)Preferred Qualifications:, • Current ARRT Certification, • Operate CT equipment to produce cross-sectional images of bones, organs, and tissue for diagnostic purposes, • Prepare patients for procedures, explain imaging process, and position patients appropriately, • Set appropriate technical parameters to accurately demonstrate anatomy and pathology, • Provide high-quality images to Radiologist for interpretation, • Adhere to radiation safety standards and hospital policies to ensure patient and staff safety, • Perform routine maintenance and troubleshooting of CT equipment to ensure proper functionality, • Document patient information, imaging parameters, and procedural details accurately in the hospital’s system, • Collaborate with radiologists, physicians, and other healthcare professionals to deliver timely diagnostic services, • Ability to adapt to different CT equipment and protocols across various healthcare facilities, • Perform other duties as assigned within the scope of CT Tech practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support Start your rewarding career as a Travel CT Technologist with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy

CrossMed Healthcare is seeking an experienced Cath Lab Tech for an exciting Travel Allied job in Orange Park, FL. Shift: 12 hr days Start Date: ASAP Duration: 13 weeks Pay: $2356 / Week Job Details • Gross Weekly Pay: $2242.00 - $2356.00, • Starts: 2026-04-13, • Assignment Length: 13 Weeks, • Shift: Day shift, • Hours Per Week: 40, • Job Quantity: 1, • Type: Travel, • City: Orange Park Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication with other health team members, • Provides and coordinates patient care, • Follows hospital safety rules and procedures, • Maintains cleanliness of rooms and adequate stock of supplies, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

Job Description GENERAL PURPOSE OF JOB: The Manager is responsible for ensuring that the center is run according to the required K1 standards. The Manager holds their Salaried and Hourly Staff accountable, coaching and developing them to be ready for the next level. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assisting the General Manager in recruiting, interviewing, hiring, training, disciplining, and terminating, • Cash handling duties including preparation of tills, change fund maintenance, and preparation of deposits, • Ensuring that cashier personnel adhere to correct cash handling procedures, • Ensure cashier personnel are meeting the minimum selling standards set forth by K1 Speed, • Monitor inventory, supporting the General Manager each month to complete an accurate account of the items on hand, • Ensuring that track personnel run races safely, efficiently and professionally, • Ensuring that mechanic personnel maintain our karts in peak working condition, • Ensuring that all staff are strictly adhering to company policies and providing outstanding customer service, • Corresponding with and providing regular reports to corporate office personnel, • Maintaining the highest standard of facility appearance, • Oversees the day- to-day operations within the policies and guidelines set forth by K1 Speed., • Identify on a regular basis their opportunities and creates an action plan to increase the performance level to the required K1 standard, • Ensures that their location has the proper staffing level to maximize the employee and guest experience., • Over sees weekly inventories of each location per company standards., • Maintain a professional K1 image including the Paddock lounge cleanliness, proper uniforms and appearance standards., • Ensures their location is keeping food cost, part costs and labor costs (hours) at or below K1 acceptable standards., • Ensures their location is consistently following the guidelines for private party events and catering including: food service and quality standards, greet procedures, POS and payout procedures, set up and décor standards, party rental and supply storage and rebooking all repeatable parties., • Understands and makes sure that each team member follows all cash handling procedures including safe maintenance, deposits and all banking functions., • Works with their team to promote a positive social media response., • Works with their team to ensure that each employee understands the importance of treating guests the K1-Way so the guests continue to return, providing an exceptional guest experience., • Responds to customer service needs to provide the highest standards of service within 24hours., • Maintains great relationships with all vendors and notifies the General Manager of any vendor issue, • Ensures their Team is providing a safe working and guest environment to reduce the risk of injury and accidents., • Represents the K1 image at all company and community events (local businesses, organizations and media)., • Ensures their Team is engaging in preventative maintenance, daily cleaning, and repairs., • Practice the K1 Speed open door policy at all times. Job Knowledge – Able to learn new skills and maintain up-to-date job-related information. Applies technical and procedural know-how to get the job done; understands job duties and responsibilities. Initiative – Takes initiative versus waiting for direction. Results and goal oriented. Desires to excel on the job. Demonstrates self-confidence and positive attitude. Professionalism – Consistently treats individuals with dignity and respect, recognizing the importance of cultural differences. Has and maintains a positive sense of humor and uses humor and uses humor appropriately. Embraces, communicates, and demonstrates company values and ethics. Maintains reasonable expectations of self and others when balancing time and performance demands with personal and professional needs. Planning and Organizing – Develops realistic plans, setting reasonable completing times. Effectively uses time and resources. Prioritizes duties in a manner consistent with organizational objectives and emergencies. Team Work/Cooperation – Successfully works with others to achieve desired results. Helps prevent/resolve conflicts. Develops positive working relationship with all people. Promotes mutual respect. Being pleasant with others on the job and displaying a good-natured cooperative attitude to bring teams of people together. Is flexible/open minded. Critical Thinking – Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Overcomes obstacles. Helps team solve problems. Productivity – Takes on additional responsibilities as needed. Manages priorities. Develops and follows work procedures. Active Learning – Understanding the implications of new information for both current and future problem-solving and decision making. The ability to accept criticism and stay calm under pressure. Communication – Communicating in a professional and empathetic way so employees understand what is expected of them. Effectively conveys and receives ideas, information and directions. Demonstrates good verbal and written communication. Paying attention to what people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times Customer Orientation – Listens, identifies, and responds, quickly and effectively to internal and external customers’ needs and sets work activities accordingly. Goes beyond what is expected and follows up to ensure customer satisfaction. Work Quality – Demonstrates accuracy, thoroughness, and attention to detail. Decision Making – Take calculated risks, make timely/responsive decisions. Modifies decisions based on new information, and takes ownership of the outcomes of each decision made. Adaptability/Flexibility – Demonstrates judgment and willingness to make exceptions. Initiates or accepts changes in the process, while maintaining focus on the task/issue. Transitions effectively between multiple tasks on priorities. Meeting the needs of each customer without compromising the brand/business. EDUCATION and/or EXPERIENCE: Must be 21 years of age. High school diploma Associates in Business or related field preferred. Must have 3 years of Food and Beverage experience, current ServSafe Manager Certificate is a plus. Must have 5 years of previous management experience with a successful track record, preferably in restaurant, entertainment or hospitality. PHYSICAL DEMANDS: This position requires that weight be lifted, pushed, pulled, safely for extended periods of time. Must be able to lift up to 100lbs with reasonable accommodation. WORK ENVIRONMENT: The work environment for this job typically has a high level of noise. The work will be performed predominantly indoors, however, things such as marketing events can be exposed to the outdoor elements. SUPERVISORY RESPONSIBILITIES: Responsible for managing salaried and hourly employees. **By applying to this position, you agree that you can perform the duties listed above.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and job placement services, and personalized coaching and mentorship through four unique career pathways. Year Up United participants also receive an educational stipend. If you’re someone who’s passionate about building relationships, is interested in organizational processes and is excited to use data to achieve business outcomes, the Business job training pathway could be the right fit for you. The Business pathway combines technical and professional training in Financial Operations with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, Merck, Amazon or LinkedIn, among other leading organizations in the Phoenix area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree, • Fund Accounting

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and job placement services, and personalized coaching and mentorship through four unique career pathways. Year Up United participants also receive an educational stipend. If you’re someone who’s passionate about building relationships, is interested in organizational processes and is excited to use data to achieve business outcomes, the Business job training pathway could be the right fit for you. The Business pathway combines technical and professional training in Financial Operations with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, Merck, Amazon or LinkedIn, among other leading organizations in the Phoenix area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree, • Fund Accounting

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and job placement services, and personalized coaching and mentorship through four unique career pathways. Year Up United participants also receive an educational stipend. If you’re someone who’s passionate about building relationships, is interested in organizational processes and is excited to use data to achieve business outcomes, the Business job training pathway could be the right fit for you. The Business pathway combines technical and professional training in Financial Operations with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, Merck, Amazon or LinkedIn, among other leading organizations in the Phoenix area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree, • Fund Accounting

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, JPMorgan Chase, or Merck among many other leading organizations in the Jacksonville area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree In-depth classes include: • Business Operations

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, JPMorgan Chase, or Merck among many other leading organizations in the Jacksonville area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree In-depth classes include: • Business Operations

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and job placement services, and personalized coaching and mentorship through four unique career pathways. Year Up United participants also receive an educational stipend. If you’re someone who’s passionate about building relationships or has an entrepreneurial mindset and are looking to gain exposure to running a business, the Customer Experience job training pathway could be the right fit for you. The Customer Experience pathway combines technical and professional training in Banking or Customer Success, with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at JPMorganChase or Bank of America among other leading organizations in the Jacksonville area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree Career growth paths include: • Financial advisory, • Sales specialist, • Product Support, • Sales operations and analytics

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, JPMorgan Chase, or Merck among many other leading organizations in the Jacksonville area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree In-depth classes include: • Business Operations

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and job placement services, and personalized coaching and mentorship through four unique career pathways. Year Up United participants also receive an educational stipend. If you’re someone who’s passionate about building relationships or has an entrepreneurial mindset and are looking to gain exposure to running a business, the Customer Experience job training pathway could be the right fit for you. The Customer Experience pathway combines technical and professional training in Banking or Customer Success, with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at JPMorganChase or Bank of America among other leading organizations in the Jacksonville area. Are you eligible? You can apply to Year Up United if you are: • A high school graduate or GED recipient, • Eligible to work in the U. S., • Available Monday-Friday throughout the duration of the program, • Highly motivated to learn technical and professional skills, • Have not obtained a Bachelorʼs degree Career growth paths include: • Financial advisory, • Sales specialist, • Product Support, • Sales operations and analytics