Trabajos technical en Camden, New Jersey - Page 20Crear alertas

Summary You will serve as an ELECTRONICS MECHANIC LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will apply advanced trades knowledge and techniques in of operation, capabilities and limitations of electronic equipment and systems.\n, • You will guide, train and mentor shop personnel performing the removal, disassembly, overhaul, troubleshooting, modification, repair, installation and testing of various electronic equipment.\n, • You will explain work requirements, methods, and procedures, instruct on new procedures, and provide advice when problems arise.\n, • You will setup, operate and troubleshoot the various types of equipment utilized to manufacture and overhaul surface and sub-surface ship components.\n, • You will use a variety of technical manuals and specifications to determine requirements and ensure quality control is maintained.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Starting Pay*:$55,052- $81,474 (GS-07/09/11/12) \n Resume alignment to Job Description will determine initial salary grade. Promotion to the full performance level or any intermediate level is contingent upon meeting time-in-grade, experience requirements, successful completion of training requirements, and demonstration of acquisition of the knowledge, skills, and abilities needed at the higher level. \n Type \n Full Time, 1st shift. This is a non-supervisory position. \n Location \n Naval Foundry and Propeller Center, Philadelphia Naval Business Center, Philadelphia, PA \n About NFPC \n The Naval Foundry and Propeller Center (NFPC) is a modern manufacturing facility that occupies a 17-acre site at the Philadelphia Navy Yard with more than 750,000 square feet of industrial and administrative floor space. NFPC employs a highly skilled and versatile workforce of engineers, trades people and support personnel who specialize in advanced engineering, castings, and precision machining. \n NFPC is a low volume, large size, sand-cast foundry that primarily pours non-ferrous alloys from induction furnaces. NFPC completes all machining operations in house and ships completed products to our internal Navy customers. See more about NFPC at our website: \n ... Description \n The Quality Assurance (QA) Specialist in NFPC’s C1430.1 Quality Assurance Program Administration Branch of its Quality Division will provide quality system oversight in a modern manufacturing facility to ensure process and/or product requirements are being satisfied while proactively identifying areas in need of potential continuous improvement. The incumbent utilizes various systems to monitor the health of various programs and utilizes multiple quality tools in identifying the root causes of unplanned events and identified deficiencies. You will serve as the designated quality assurance supporting a versatile workforce of engineers, trades people, and support personnel. Tasks may include conducting audits, inspecting work, identifying deficiencies, and supporting the implementation of corrective actions. \n Responsibilities and duties include but are not limited to: \n · Reviewing production processes and capabilities for compliance to established quality requirements. \n · Reviewing established quality or inspection procedures for adequacy and evaluating the implementation and effectiveness of quality/inspection systems, including sampling plans. \n · Analyzing quality data to detect unsatisfactory trends or weaknesses in the quality system. \n · Identifying inadequacies of processes and requesting corrective action for continuous improvement initiatives \n · Computing data, summarizing results, and preparing reports or charts depicting pertinent relationships using statistical methods. \n · Investigating customer complaints and deficiency reports and providing identification of causes to appropriate authorities. \n · Reading, interpreting, and applying technical data such as schematics, engineering drawings, product specifications, or technical manuals. \n · Reviewing and evaluating systemic operations and procedures through periodic audits and surveillance inspections \n · Possesses in-depth knowledge of process analysis and improvement initiatives \n · Complying with all NFPC policies and procedures related to occupational safety, health, and environmental compliance \n Qualifications required for the position: \n • Work experience related to Quality Management Systems in a manufacturing environment and/or Process/Systems Engineering\n, • Development, implementation and maintenance of a manufacturing centric quality management system conforming to standards (ISO 9001 / AS9100)\n, • Application development and utilization in SharePoint and/or MS Teams environment\n, • Collaboration between multiple trades and engineering disciplines\n, • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met.\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • 401(k)\n, • 401(k) matching\n, • Dental insurance\n, • Flexible spending account\n, • Health insurance\n, • Life insurance\n, • Paid time off\n, • Parental leave\n, • Professional development assistance\n, • Retirement plan\n, • Tuition reimbursement\n

Summary You will serve as a MARINE MACHINERY MECHANIC SUPERVISOR I in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will direct personnel in troubleshooting, repairing, overhauling, and installing marine engines and other equipment, such as propulsion machinery auxiliary generators, pumps, compressor, and fire fighting machinery on vessels.\n, • You will coordinate with contractor technical representative personnel when assigned to perform troubleshooting, analysis, and/or repairs.\n, • You will provide direction to workers by assigning the immediate tasks to be performed by individual members of the group; ensuring proper work methods; and seeing to it that needed plans, blueprints, materials, and tools are available.\n, • You will determine performance of a satisfactory amount and quality of work and review products for acceptability.\n, • You will actively support and promote all aspects of the Equal Employment Opportunity (EEO) Program.\n, • You will check work in progress and when finished to ensure instructions on work sequence, procedures, methods, and deadlines have been met.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Responsibilities Noblis MSD is seeking Electrical Engineers with an active Secret Clearance in Philadelphia, PA. Noblis MSD is seeking several Electrical Engineering candidates to support various hull, mechanical and electrical systems (HM&E), and research, development, test and evaluation (RDT&E) programs for the Naval Surface Warfare Center, Philadelphia Division (NSWCPD). This requisition covers multiple positions, including: \n • Electrical Engineer, Jr. Level \n, • Electrical Engineer, Mid Level\n, • Electrical Engineer, Senior Level\n\n Responsibilities Include: \n • Design, develop, and test electrical systems and components to meet project specifications and industry standards.\n, • Create detailed electrical schematics, conducting simulations, and performing analysis to ensure system reliability and efficiency.\n, • Support of electrical engineering systems as related to the area of design and modifications of steam and diesel driven electrical power generation systems and equipment.\n, • Interpret and apply electrical schematics, blueprints, NAVSEA standards, and the Joint Fleet Maintenance Manual (JFMM).\n, • Effective communication and documentation of technical information will be crucial, as you will prepare reports, manuals, and presentations for stakeholders and clients.\n, • Collaborate with cross-functional teams, including mechanical engineers, software developers, and project managers, to integrate electrical solutions into larger systems.\n, • Facilitate fleet implementation and fielding plans.\n, • Also oversee the installation, maintenance, and troubleshooting of electrical equipment, ensuring compliance with safety regulations and quality standards.\n, • Provide feedback and lessons learned for test plans and technical documentation\n Junior Level \n • Bachelors degree in Engineering or related scientific or technical discipline.\n, • Requires minimum of three (3) years of electrical engineering experience.\n, • Must have an active DoD Secret Clearance\n, • Must be a US Citizen\n, • Bachelors degree in Engineering or related scientific or technical discipline.\n, • Requires minimum of five (5) years of electrical engineering experience.\n, • Must have an active DoD Secret Clearance\n, • Must be a US Citizen\n, • Bachelors degree in Engineering or related scientific or technical discipline.\n, • Requires minimum of eight (8) years of electrical engineering experience.\n, • Must have an active DoD Secret Clearance\n, • Must be a US Citizen\n \n • Knowledge of Submarine electrical system concepts.\n, • Submarine systems Subject Matter Expert Preferred. \n, • Knowledge of basic project management principles to include but not limited to planning, organizing, directing and controlling organizational resources in order to meet goals and objectives.\n, • Experienced in specific to Naval maintenance and upkeep processes is a plus.\n, • Ability to interact with multiple Navy activities and effectively communicate technical information with all levels of personnel both military and civilian.\n Noblis and our wholly owned subsidiaries, Noblis ESI, and Noblis MSD tackle the nation's toughest problems and apply advanced solutions to our clients' most critical missions. We bring the best of scientific thought, management, and engineering expertise together in an environment of independence and objectivity to deliver enduring impact on federal missions. Noblis works with a wide range of government clients in the defense, intelligence and federal civil sectors. Learn more at Noblis -About Us Why work at a Noblis company? Our employees find greater meaning in their work and balance the other things in life that matter to them. Our people are our greatest asset. They are exceptionally skilled, knowledgeable, team-oriented, and mission-driven individuals who want to do work that matters and benefits the public. Noblis has won numerous workplace awards. Noblis maintains a drug-free workplace. *Remote/hybrid status is subject to change based on Noblis and/or government requirements Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, sex, age, national origin, religion, physical or mental disability, pregnancy/childbirth and related medical conditions, veteran or military status, or any other characteristics protected by applicable federal, state, or local law. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact us. EEO is the Law | E-Verify | Right to Work Total Rewards At Noblis we recognize and reward your contributions, provide you with growth opportunities, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, and work-life programs. Our award programs acknowledge employees for exceptional performance and superior demonstration of our service standards. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in our benefit programs. Other offerings may be provided for employees not within this category. We encourage you to learn more about our total benefits by visiting the Benefits page on our Careers site. Compensation at Noblis is determined by various factors, including but not limited to, the combination of education, certifications, knowledge, skills, competencies, and experience, internal and external equity, location, clearance level, as well as contract-specific affordability, organizational requirements and applicable employment laws. The projected compensation range for this position is based on full time status. For part time or on-call staff, compensation is proportionately adjusted based on hours worked. While monetary compensation is important, it's just one component of Noblis' total compensation package. Posted Salary Range USD $77,000.00 - USD $176,150.00 /Yr.

EisnerAmper is seeking an AI Solution Architect who will serve as a lead developer on the EisnerAI Platform, designing and implementing the technical architecture that powers EisnerAmper's intelligent solutions across tax, audit, outsourcing and advisory services.

Job Description The Sporting Club at The Bellevue features nearly 100,000 square feet of health, fitness, athletic and social facilities. The facility includes a basketball and pickleball court, state of the art fitness equipment, private saunas, an indoor Olympic sized pool, and various fitness classes. Additionally, the club features 2 squash courts and a golf pavilion with 3 simulators, a hitting net and putting green. Recently, the Sporting Club has gone through a complete renovation transforming it into the ultimate health and wellness destination in Philadelphia. The Sporting Club at The Bellevue has an exciting opportunity for a Fitness Floor Attendant to join our growing team. We are looking for an individual to be responsible for overseeing the Fitness Floor and providing exemplary service to The Sporting Club members. Attendants will need to educate members on the full usage of workout equipment and answer any/all questions adhering to best practices and procedures. Primary Responsibilities: • Fully understand the Technogym equipment, • Educate members on the usage of BioStrength machines, • Provide best in class service, • Work with Personal Trainers and staff to keep a clean, orderly, and safe work environment, • Work with Director of Fitness to come up with new ideas, special events, and provide meaningful feedback to boost our Sporting Club programs, • Help coordinate other Fitness Department activities in Personal Training and Group Fitness classes, • Assist with special membership programs and events, • Other duties as assigned Position Requirements: • Minimum of 1-year prior experience working in a fitness club, • Good working knowledge of fitness and equipment, • Current CPR/AED and first aid certification required Technical Skills/Knowledge: • Excellent verbal and written communication skills, • Strong Interpersonal skills, • Excellent customer service focus, professionalism, and discretion Pay: $17/hour The Sporting Club is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Job Description: \n • Position is for a Mechanical/Civil/Structural/Naval/Marine Engineer or Naval Architecture with experience in structural inspection/construction/evaluation and or Non-Destructive Testing (NDT).\n, • Areas of experience related to structural integrity applications.\n, • Knowledge of U.S. Navy technical publications/standards/requirements for shipboard Hull Structure is desirable.\n\n Required Skills and/or Experience: • Five (5) years of experience in the realm of structural integrity applications.\n Degree Requirements: • Bachelor of Science (BS) Degree in or a similar discipline from an accredited college or university\n \n • Must be a US Citizen\n, • A secret security clearance \n

Position: Welder (FCAW & GTAW) Location: Camden, NJ; Advanced Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Holtec International offers a competitive benefits package to eligible associates, which includes: \n • Medical, dental, and vision insurance\n, • 401(k) retirement plan with company match\n, • Paid time off and 11 Paid Holidays\n, • Company-paid life and AD&D insurance\n, • Employee Assistance Program\n, • Wellness resources and voluntary benefits\n, • Training and educational assistance\n\n Salary Range: $26 per hour to $37 per hour based on experience.

Naval Surface Warfare Center, Philadelphia Division, Code 24 is responsible for program management, engineering, technical, and logistics support for HM&E systems and equipment on U.S. Navy Submarines. Job Description: \n • Provide engineering and technical support regarding the design, repair, qualification, installation, modification, operation, maintenance, troubleshooting, and testing of U.S. Navy submarine propulsion, electrical, mechanical, auxiliary and information systems. \n, • Provide shipboard-troubleshooting and onsite support to resolve issues as requested and support ongoing waterfront maintenance activities regarding submarine-HM&E systems. \n, • Assist NSWCPD with the development, preparation, assessment, and conduct or monitoring of proposed test procedures on U.S. Navy submarine propulsion, electrical, mechanical and information systems. \n, • Assist NSWCPD with shipboard system planning, estimating, and scheduling of work. \n\n Education Requirement: • Ten (10) years of experience in U.S. Navy Submarine systems and equipment, including the installation of systems, ships alterations, overhauls, repairs, testing, shipboard systems planning, estimating, and scheduling work. \n \n • Must be a U.S. citizen\n, • A secret security clearance\n

Requisition Number: 23408 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $56,814.00 - $70,000.00 Security Clearance: Secret Level of Experience: Mid This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are HII Mission Technologies is seeking a skilled and motivated Engineering Technician to join our dynamic team. This work is for NSWCPD Code 533 and requires the candidate to be on-site in Philadelphia 4-5 days a week. The Engineering Technician will be responsible for providing comprehensive engineering technician support to the Data Acquisition Systems (DAS) Engineering Team, encompassing operation, maintenance, and installation of various DAS programs. Proactively troubleshoot DAS instrumentation issues using diverse measurement tools to achieve resolution. Support the DAS Engineering Team with advance planning, development, and organization for pre-installation preparation of upcoming components. Identify, document, report, and recommend improvements for unexpected or abnormal conditions to the DAS Engineering Team. Must be comfortable working with electrical equipment, including low and medium voltage switchboards, generators, transformers, and load centers. What You Will Do • Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas., • Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems., • Works from schematics, engineering drawings and written or verbal instructions., • Operates related equipment; conducts tests and reports data in prescribed format., • Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions., • Exclude technicians working in production or quality assurance. \n Candidate will be working on the following: • Trials Data Acquisition & Analysis System (various hulls), • FFG-62 Land Based Engineering Site (LBES), • DDG(X) Land Based Test Site (LBTS), • DDG-51 Land Based Engineering Site, • Advanced Weapons Elevator Land Based Engineering Test Site, • Power & Energy Dynamic Assessment Laboratory, • Full Ship Shock Trials Electrical Power Monitoring (various hulls) \n What You Must Have • AA or other 2 year technical degree in related discipline and 3 years of related experience, or HS + 5 years related (DoD/USN) experience., • Candidate must have four (4) years of electronics engineering experience in the operation, test and maintenance of naval ship Combat Systems, Hull, Mechanical, Electrical, Electronic, equipment and systems., • Candidate must have experience with the use of naval ship blueprint and technical manual drawings to produce artwork suitable for inclusion in documentation., • Candidate must have Active Secret Security Clearance, • Candidate Must be located or willing to locate within the Philadelphia, PA region, • Candidate must have knowledge of instrumentation and low voltage (<48V> \n, • Candidate must have knowledge of electronics including resistors, capacitors, and other terminal board components., • Candidate must be capable of operating mechanical tools, power tools, perform cable terminations, and move heavy equipment to fabricate test enclosures., • Candidate must be comfortable working within electrical equipment, including Low Voltage and Medium Voltage switchboards, generators, transformers, and load centers., • Candidate must have good organization skills and attention to detail, have strong verbal and written communication skills, and the ability to utilize and operate software with minimal oversight.\n Bonus Points For Having! • Possess the ability to develop, coordinate, and execute Work Execution Documents and Technical Artifacts supporting DAS installations., • Possess the ability to understand and execute National Electric Code, NFPA 70 for DAS installations on LBTS/LBES. \n Physical Requirements Job performance requires adequate visual acuity and manual dexterity for meeting the requirements of the job. A waterfront office work environment is normally encountered. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Summary You will serve as a ELECTRONICS MECHANIC LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will provide on-the-job technical guidance, coordination, and leadership of a work group.\n, • You will determine manning required to meet schedules and providing recommendations to the supervisor.\n, • You will instruct subordinates on any unusual work steps or requirements and explaining directives and instructions received from higher supervisory levels.\n, • You will lay out work for the group, taking lead in performing the more difficult steps.\n, • You will check work while in progress and when finished, to see whether instructions on the work sequence, procedures, methods, and deadlines have been met.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. • Ensure that all HPSI safety procedures, rules and regulations are performed and met, • Responsible for the downloading, organizing, filing and distributing project-related electrical outfitting design documents, • Process approved engineering documents using standard Documentation Control System (DCS) to register documents and maintain the database as required, • Support the development of detailed design work package documentation, such as the fabrication drawings, installation drawings, installation standards, and material lists for release to production; this may include design subcontractor oversight, • Participate in basic and outfitting design activities within the Electrical Design Department, which includes, but is not limited to, the detailed review of design to confirm the design is complete, accurate and complies with shipyard electrical outfitting design standards, building methods, vessel contract specifications as well as Class, USCG and other regulatory body rules and regulations, • Provide field engineering support as required to support production activities by troubleshooting production concerns that arise during vessel construction, • Provide feedback to Electrical Basic and Electrical Outfitting Designers based on issues encountered in the field including installation difficulties, missing material / equipment, hardware requirements, testing requirements, and technical specifications, • Provide field corrections and repair instructions for electrical outfitting items, • Develop Design Change Notice (DCN) documentation to formally implement repairs, improvements, or other corrections to the design, • Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to electrical outfitting design, • Provide support to test engineers during vessel testing and commissioning, • Travel domestically and internationally to coordinate efforts of design partners and vendors in order to facilitate progress of basic and outfitting design, and resolve outstanding design issues, • Communication skills, both verbal and written, • Decision making/problem solving, • Organizational understanding, • Willingness and ability to work as a team member, • Integrity, • Conflict resolution, • Strategic thinking This position has no supervisory responsibilities. EDUCATION AND EXPEREIENCE • Bachelor's Degree in Electrical Engineering is preferred; however, candidates with a technical diploma and 5+ years’ experience in ship design and/or construction may also be considered, • Minimum 5 years’ experience in shipbuilding, system design, or manufacturing, • Experience with electrical system or electrical design and construction, • Proficiency with MS Office and CAD systems such as AutoCAD, • Knowledge/experience concerning basic and detail ship design, • Knowledge/experience concerning modern shipbuilding practices Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. *Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment is this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Job Description SAMOST JEWISH FAMILY AND CHILDREN’S SERVICE OF SOUTHERN NEW JERSEY Job Description: Soups and Sweets Instructor Reports to: Soups and Sweets Manager, Disability Services Department Primary Responsibilities: To instruct and evaluate the students in the Soups and Sweets Culinary Training Program, and assist the Soups and Sweets Manager with all programmatic needs Schedule: Part-Time – 24 hours per week Salary Range: $21-$24 per hour The Soups & Sweets Culinary Instructor is responsible for delivering high-quality culinary instruction, mentorship, and hands-on training to individuals participating in the Soups & Sweets Culinary Training Program. This role blends professional kitchen expertise with an instructional approach, ensuring trainees gain the technical, safety, and work-readiness skills necessary to thrive in food service environments. Culinary Instruction & Training · Teach culinary fundamentals, advanced techniques, and industry best practices in a professional kitchen setting. · Provide hands-on training in food preparation, cooking, baking, plating, and presentation. · Instruct trainees in proper use of commercial kitchen equipment, sanitation protocols, and food safety standards (ServSafe compliance). · Model professional kitchen organization, time management, and workflow efficiency. Program Development & Delivery · Enhance and collaborate with the team to develop and maintain the Culinary, Café, and Market Training Manual · Collaborate with the team to design additional lesson plans, recipes, and training modules that accommodate varying skill levels and learning styles. Co-lead discussions during Work Readiness Classes. · Integrate customer service, teamwork, and hospitality principles into instruction. Trainee Support & Evaluation · Conduct intake assessments for potential trainees to determine skill level and training goals. · Track attendance, performance, and skill progression, providing feedback to trainees and families as appropriate. · Assist with evaluations as required by funding agencies (DVRS, DDD) and ensure compliance with reporting requirements. · With the assistance of the Manager, maintain compliance for any students funded through DDD, including developing: Annual Report / Emergency Cards / Fire Drill Reports · Promote a safe and supportive learning environment, intervening in conflicts and modeling positive workplace communication. Operational Support · Assist with product inventory, packaging, and delivery as needed. · Support outreach and marketing efforts for the Soups & Sweets Culinary Training Program. · Maintain a clean, organized, and hazard-free training kitchen in compliance with health department standards. Required Education & Experience: Education: Associate’s or Bachelor’s degree in Culinary Arts (or equivalent professional training) preferred Experience with customer-based operations preferred Experience: Minimum two years as a chef, sous chef, or culinary instructor in a professional kitchen or food service operation. Experience in bakery, café, or catering settings highly valued. Additional Technical Requirements: Ability to break down complex kitchen tasks into teachable steps. · Excellent communication skills and patience when working with individuals with diverse abilities. · Knowledge of adaptive teaching strategies in a culinary environment. · Valid driver’s license, registration, and insurance preferred GENERAL COMPETENCIES: To perform the job successfully, an individual should demonstrate the following competencies: § Thorough understanding of Federation’s mission, policies, values, strengths, and weaknesses. Understanding of the tri-county Jewish community. Creatively identify problems and develop and implement solutions to achieve organization goals. § Ethics – Treat staff and donors with respect, regardless of their status or position. Work with integrity and ethically. § Interpersonal Skills and Donor Relations – Adapt to changing work environments and maintain a good working relationship with co-workers, donors, lay leadership, and members. Manage difficult or emotional staff or volunteer situations. § Teamwork—Exhibit objectivity and openness to others’ views. Contribute to building a positive team spirit. Put success of team over own interests. § Strategic Thinking – Develops strategies to achieve organization goals. Understands organization’s strengths and weaknesses. Adapts strategies to changing conditions. Displays willingness to make decisions. Includes appropriate people in decision-making process. Takes calculated risks to accomplish goals. § Project Management – Prioritizes and manages time effectively. Communicates changes and progress. Completes projects on time. § Written Communication – Writes clearly and informatively. Edits work for spelling and grammar. Presents numerical data effectively. § Problem Solving - Displays original thinking and creativity. Identifies problems and develops solutions. Works well in group situations. Looks for ways to improve work processes and quality. § Dependability - Demonstrates accuracy and thoroughness. Completes tasks on time. Uses time efficiently. Is consistently at work and on time. Maintains confidentiality. § Project Management - Monitors status of projects, thoroughly deals with project details, holds project owners accountable, delivers clear, accurate depiction of status. § Initiative – Undertakes self-development activities. Seeks increased responsibilities. Accepts constructive criticism. § Diversity – Shows respect and sensitivity for cultural differences. Promotes a harassment-free environment. EEO Statement: The Jewish Federation of Southern New Jersey, and our family of agencies, is an Equal Employment Opportunity employer. We do not discriminate based upon a person’s actual or perceived gender, race, creed, color, sex (including pregnancy), affectional or sexual orientation, gender identity or expression, marital/civil union status, domestic partnership status, familial status, religion, national origin, nationality, ancestry, age, veteran or military status, disability that does not prohibit performance of essential job functions, or other legally protected characteristics. The Federation participates in the E-Verify program. The Federation is committed to working with and providing reasonable accommodation to applicants with disabilities. If you need assistance or an accommodation due to a disability, you may contact us via the link on this posting. EOE

NDI Engineering Company is seeking Mechanical Engineers to support propulsion systems onboard U.S. Navy Vessels. \n The ideal candidate will have experience in Main Reduction Gear (MRG), Propulsors, Propellers, \n Shafting, Waterjets, Rudders, Bow Thrusters, Dehumidifiers, and Vent Fog Precipitator Systems. \n Job Responsibilities \n Work as part of a project team and interface with managers, design engineers, U.S. Navy civilian engineers, and equipment manufacturers at the Naval Surface Warfare Center Philadelphia Division (NSWCPD). \n Provide engineering and technical services to coordinate parts and equipment repairs with repair depots and vendors. \n Develop technical repair standards and develop engineered repair processes. Research qualified repair vendors. \n Provide engineering consultation for improved supply chain management and performance. Provide technical expertise for process improvements. \n Provide technical expertise for operation, assessment, repair requirements, and performance improvement of 2S COG spares. Provide engineering services for status of various 2S COG propulsion equipment and parts. \n Provide support to develop Technical Data Packages (TDP) and Statements of Work (SOW) for new equipment procurements and repair contracts. \n Collect data and help prepare status reports, spreadsheets, and graphs. \n Provide design, installation, and testing support of power transmission systems including propellers, shafting, rudders, appendages, water jets, controllable pitch propeller systems, auxiliary propulsion systems, and main reduction gear equipment including clutches, couplings, bearings, and seals. \n Develop detailed test procedures to ensure proper installation and configuration of power transmission repairs and updates. \n Provide engineering and programmatic support to Surface Maintenance Engineering Planning Program (SURFMEPP) and NSWCPD to develop, review, update, and gain approval of Class Maintenance Plans (CMP). \n Provide On-site fleet waterfront and distance support for HM&E and Propulsion System shipboard equipment upgrades CONUS and OCONUS including planning, scheduling, staging, and coordination of shipboard equipment upgrades. \n Coordinate installations across the waterfront to include planning, pre-checks, oversight, Integrated Logistics System (ILS) installation, post testing, training, and feedback to applicable In-Service Engineering Agents (ISEA’s)/Technical Codes at NSWCPD. \n Develop engineering requirements that enable Navy Surface Ships to meet their expected service life (ESL). Provide Strategic Support on Fleet Sustainment Matters. Provide strategic level assistance in the evaluation of new and evolving fleet sustainment policies, programs, and priorities to ensure NSWCPD is positioned to leverage its capabilities wherever possible to best support the fleet. \n Reviews of Contract Data Requirements Lists (CDRL's), formulation of responses for Requests for Clarification, Interpretation or Assistance (RCIA's), Justifications for Technical Determination (JTD's), and Proposed Changes (PC's) and coordination of responses through the Navy Technical Authority (NTA) for all ship design issues. \n Provide engineering support to the design, repair, installation, modification, operation, maintenance, troubleshooting, and testing of U.S. Navy equipment and systems. Support includes review of technical documentation, procedure development and implementation, ship checks and ship visits as required, provide assistance with equipment and parts procurement, and writing and reviewing test report and waiver/deviation documentation. \n Conduct site inspections to determine existing conditions and to assess impacts on designs under development. \n Education and Experience Requirements \n Junior Level Mechanical Engineer: \n Minimum Education: Bachelor’s level degree in Mechanical Engineering, Materials Engineering, Systems Engineering, Marine Engineering, or Naval Architecture from an accredited college or university. \n Minimum Experience: One (1) year professional experience related to general engineering principles such as, but not limited to, forces, strength, hardness, thermal expansion, torque, corrosion. One (1) year experience with shipboard propulsion and power transmission systems (Gears, Clutches, Bearings, Propeller Systems, Rudders, Waterjets, Dehumidifiers, or Vent Fog Precipitators) is encouraged, but not required. \n Must be a US citizen and able to qualify for a DoD Secret clearance. \n Have strong verbal and written communications skills. \n Work location is at the Navy Yard in Philadelphia. \n NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. \n NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status

Job Description Join Oculoplastic Surgeons of Philadelphia as a Part Time Medical Assistant, where you will be at the forefront of patient care in a dynamic healthcare setting. This onsite position offers a unique opportunity to work closely with renowned professionals in oculoplastic surgery, enhancing your medical skills and knowledge. Experience a vibrant and energetic company culture that prioritizes high performance and customer-centricity, all while enjoying a fun atmosphere among your peers. With pay ranging from $18.50 to $21.00 per hour based on experience, this job provides competitive compensation as you contribute to meaningful patient interactions in our Philadelphia clinic. Your role will make a direct impact on patient safety and satisfaction. You will be given great benefits such as Paid Parking, Sick time, and PTO based on hours worked. Take the next step in your career and become an integral part of our dedicated team! Are you excited about this Medical Assistant job? As a new Part Time Medical Assistant at Oculoplastic Surgeons of Philadelphia, you can expect a supportive and engaging work environment focused on patient care. Your day-to-day responsibilities will include preparing patient rooms, ensuring all necessary equipment is sanitized and ready for procedures, and assisting with patient intake. You will play a key role in taking patient histories, recording vital signs, and providing education on postoperative care. Additionally, you’ll be expected to manage appointment schedules, ensuring a seamless experience for patients while also maintaining accurate medical records. if possible, participate in various procedures and gaining hands-on experience in oculoplastic practices. Your expected schedule will be from 8 AM to 4 PM, Monday through Friday, allowing for a balanced work-life experience while contributing to the high-performance culture at our Philadelphia clinic. Are you the Medical Assistant we're looking for? To thrive as a Part Time Medical Assistant at Oculoplastic Surgeons of Philadelphia, a solid foundation in medical terminology is essential, enabling clear communication with both patients and team members. Prior medical office experience will help you adapt quickly to our fast-paced environment and enhance the patient experience. Familiarity with electronic medical records (EMR) systems is crucial, as you will be responsible for maintaining accurate patient documentation and managing appointment schedules efficiently. In addition to technical skills, strong interpersonal abilities are vital, as you will be interacting with diverse patients, addressing their concerns, and providing support throughout their care journey. Attention to detail, organizational skills, and a proactive attitude will ensure that you effectively contribute to our high-performance culture. By demonstrating these skills, you'll play a significant role in promoting patient safety and satisfaction at our Philadelphia clinic. Knowledge and skills required for the position are: • Medical terminology and medical office experience

The ideal candidate will have a strong technical background in CNC machining, excellent communication skills, and a passion for customer success. Support the sales process by providing technical expertise and product knowledge to customers and Sales Executives as needed. Strong technical knowledge o

Work hand in hand with Product Development teammates to ensure testing programs are aligned with market trends and that the Technical Service Manager is well educated regarding development projects as launch time approaches. The Minnesota and Eastern South Dakota Technical Service Manager (TSM) over

Competitive Pay - As a Customer Support Rep you'll: Help customers with technical and non-technical inquiries across multiple channels (Email and Live Chat); Engage in meaningful conversations with customers and problem-solve when things don't go quite right; Ensure customer satisfaction by meeting

This is a role focused on technical claim handling for Chubb insured's nationwide.In this role you will manage complex primary and excess general liability and automobile claims, both litigated and non-litigated.This role requires an individual to be accountable for the handling and disposition of c

Demonstrate advanced SEO knowledge, including on-page, off-page, and technical SEO best practices. Collaborate with internal team members to ensure the timely implementation of on-page, off-page, and technical SEO deliverables. Contribute to strategies that optimize content for AI-powered search exp

Job Description We are looking for a dedicated Warehouse Associate in Sharon Hill, PA 19079 with $18.26/hr pay for a 6 months contract duration (temp to perm opportunity). In this role, you will play a vital part in the moving, arranging, lifting, and loading of storage boxes, bins, and totes. This position requires physical agility as you will frequently kneel, squat, reach, bend forward, and handle items ranging from 24 lbs to over 100 lbs. If you have the physical capabilities and attention to detail required for this role – APPLY NOW! Schedule:9:00 AM - 5:30PM,Monday to Friday, 9-hour shifts (includes 30-minute lunch + two 15-minute breaks) Roles and Requirements: Process orders and handle items such as files, books, binders, and backup tapes. The work is physically demanding, involving manual lifting, carrying, and moving of boxes while standing, stooping, crawling, kneeling, and twisting. You should be capable of independently lifting and carrying boxes ranging from 10-100 lbs regularly. Operating hand trucks and pallet jacks on varying surfaces is also a key aspect of the role. Essential Functions: • Perform tasks like walking, standing, kneeling, squatting, stooping, and bending for extended periods., • Independently handle gripping, lifting, pushing, pulling, and carrying boxes, including navigating inclines, stairs, and changes in surface/elevation, • Read and write in English proficiently, • Lift and move boxes, process orders, and use a proprietary computer system for tracking, • Operate handheld scanners and maintain balance on ladders, • Lift and carry boxes weighing up to 100 lbs. for prolonged periods, • Expertly load, operate, and move hand carts, pallet jacks, and various material handling aids, • Load and shrink-wrap pallets on ground level or carts, and manually load boxes onto pallets and trucks RightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is an equal opportunity employer and prohibits unlawful discrimination based on race, color, creed, gender, religion, marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sex, genetic information, sexual orientation, military and veteran status or any other consideration made unlawful by federal, state, or local laws. RightStone is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination by any employee of the Company, including supervisors, coworkers, independent contractors and other third parties. Company DescriptionRightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT! RightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success. Candidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business! Client Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!RightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you!\r\n\r\nRightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT!\r\n\r\nRightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success.\r\n\r\nCandidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business!\r\n\r\nClient Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!

To be eligible to enlist in the U.Navy, candidates must be between the ages of 18-34.Americans live for fireworks on the Fourth of July.The other 364 days of the year, Explosive Ordnance Disposal (EOD) Technicians and Officers are doing all they can to prevent them.Using advanced tools like cutting-

Job Description Position Summary OPEX Corporation is currently looking for a full-time Tool Crib Attendant to work in our 180,000 sq. ft. manufacturing facility in Pennsauken NJ. This position requires purchasing, order entry, order expediting, receiving shipments, inventory control and general stock room management. The ideal candidate will need technical knowledge of cutting tools and abrasives, be organized, detail oriented, have good follow-thru and have the ability to excel in a fast-paced environment. The Tool Crib Attendant is part of the tool room team and will be responsible for preparing tooling setups, certifying, and delivering all tools to the production work centers for all shifts. In addition, this person orders, receives, stores, and issues all hand tools, machine tools, materials, fixtures, measuring devices, and/or related equipment in support to all manufacturing operations. This position is also responsible for generating and maintaining an accurate inventory of all purchased and manufactured items within the tool room. Manage tooling inventory including the maintenance of all cutting tools, tool holders and associated product. Issue tooling to the shop floor. Identify tool misuse / damage and report concerns to management. Process tooling orders through multiple vendors and manage outsource requirements. Provide support with general shop maintenance when necessary. Essential Responsibilities/Qualifications • Maintain minimum quantities of commonly used tools and equipment. Receive, properly/securely store, and issue hand tools, machine tools, dies, and other materials and/or equipment in a production environment, • Maintains and tracks an overall tooling budget, • Issues tools, supplies and equipment to workers and maintains records of tools and equipment issued and returned, • Responsible to ensure accurate inventory by reviewing inventory summaries and details. Prepares periodic inventory or maintains perpetual inventory of tools and equipment, • Inspect and measure tools and equipment for defects and material wear, manually or by using the proper measuring equipment, • Marks and identifies tools and equipment, • Verifies all tools, gages and fixtures; Ensures that measuring devices are periodically calibrated, • Monitors tooling usage and suggests cost effective alternatives, • Supervise all outsource regrind requirements as necessary, • Conduct preventive maintenance on the tools and equipment; Cleans, oils, and performs minor repairs on equipment; disposes of surplus or obsolete equipment, • General inventory skills, • Worker will be working in a machine shop setting, • Ability to maneuver a job site, including small spaces in around our equipment, • Sitting and standing for an extended period of time, • Worker must be able to lift 50 pounds OPEX Corporation is more than a manufacturer of machines. We continuously reimagine technology to power the future for our customers. With an innovative approach, we engineer unique automated solutions that support our customers so they can solve the most pressing business challenges for both today and tomorrow. Our scalable Warehouse, Document, and Mail Automation solutions improve workflow, accelerate change, and drive efficiencies in infrastructure. We are a family-owned and operated organization with more than 1400 committed employees who innovate, manufacture, install, and service products that are helping transform industry every day. We listen to our customers, respect each other, and work together to help reimagine the future through automated solutions. At OPEX, we are Next Generation Automation. Benefits: Benefits include, but are not limited to: • Full medical, dental and vision with low employee contribution rates, • Paid holidays and PTO allowance, • 401k with matching and profit sharing, • Basic life insurance, short term and long-term disability, • On-site fitness facility, • Tuition reimbursement available OPEX Corporation is an Equal Opportunity/Affirmative Action Employer, without regard to race, color, religion, sex, national origin, age, disability, and protected veteran status. Company DescriptionOPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.OPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.

Job Description Directly responsible to the General Manager and/or a delegate. Must communicate with all plant production personnel. Functionally responsible for the production and quality of material, including it being packed and inspected as per customer requirements. Ensure that a safe working environment is maintained at all times. This will be done by following Company policies and procedures. We believe that every Employee is responsible to act safely and to model good safety practices. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Production Associate are detailed below, but not limited to the following: • Responsible for safely and quality of effectively operating all machines within the department: presses, saws, punch press, drilling, tapping, deburring machines and any other additional equipment that may be purchased in the future, • Racking, un-racking, and inspection of parts through the anodizing line, • Check the machine condition for any issues and/or mechanical problems prior to starting it, • Follow work orders and produce parts according to specifications, • Ensure material is packed in order of priority according to the pack dates indicated on the WIP Report., • Confirm weights and counts are correct., • Check material for hardness and record the readings in EPICS. If material is not within spec for hardness, it must be red tagged ahead of the pack stage and QA must be notified., • Once an order is complete, ensure the correct tagging colors are used based on work order routing., • Adherence to work order instructions are critical such as the notes section for specific customer requirements, • Pack all orders according to the required pack code so that it reaches its final destination intact., • Responsible for inputting data into EPICS throughout the run and upon completion of production, • Required to check samples periodically according to what is outlined by the quality standards stated on the work order, • Ensure first piece sample is verified by another personnel to ensure it meets specifications., • Verify the material being provided matches with what the work order is asking for to ensure all instructions are being followed, • Look for material defects, before & during packing, such as but not limited to scratches, dents, and distortion to the profile., • Perform dimensional inspection according to the requirements on applicable orders., • Shrink wrap material that is shipped in bulk on skids., • Use tape and banding as required to secure & maintain the integrity of the material on the skids., • Enter required data into our system to create packing tickets and apply tickets to skids., • Be curious and ask questions. Make suggestions for improvement & assist in fixing problems., • Maintain clean and organized work environment., • Comply with all quality related policies, procedures and system requirements. MINIMUM QUALIFICATIONS Education/Experience • Grade 12 education., • Minimum 1 year experience in manufacturing, using variety of machining, packing, and handling material. Technical Skills/Competence • Must have good command of English, written and oral., • Should be familiar with MS Office., • Must be capable of using measuring instruments and able to read blueprints/drawings., • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability

You will serve as the focal point within NSWCPD for design and technical support of CTF auxiliary machinery fluid systems to include lube oil and liquid cooling systems. QualificationsYour resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (G

Job Description Hair Stylist Skills and Qualifications: • Strong foundation and passion for hair with at least five years of work experience as a Hairstylist, Hairdresser, Colorist, or similar role, • Proficiency in hair straightening and curling methods, using hot irons and curlers, • Must have customer service experience, knowing how to properly greet in-person and over the phone, • Must understand the importance of "upselling" and building rapport with clients., • The ability to communicate compassionately with customers and understand a look they want, even if they don’t know the technical terms for a certain style., • Hands-on experience with various coloring techniques., • Experience using different types of scissors, trimmers, and other tools to create hairstyles., • An understanding of the different types of hairstyles a person can request and how to properly achieve those looks without damage., • A willingness to learn about new styles and techniques that prevent damage and increase long-term client hair health., • Excellent communication skills with clients and staff; showing accountability for being clear, direct, and professional at all times., • Ability to stand for long hours while keeping a positive attitude., • Ability to engage customers and identify their preferences by asking pointed questions that help you build rapport and execute the client's desired style, • Form bonds with loyal customers and remember their hairstyle preferences; upselling products that are used to create their desired style and increase their hair health, • Consult customers about styles and colors and apply hair care products, like treatment oils and masks, • Communicate with customers to understand their exact needs, and apply previously acquired knowledge to recommend the best styles for clients., • Give clients advice on how to maintain a hairstyle or look and explain the best strategies used to maintain hair health and why it’s important to keep in mind., • Ensure that all customers leave our salon invigorated, refreshed, and satisfied with our services and feel happy with their new looks., • Cross-sell/Upsell hair care products or services, when appropriate, • Must be up-to-date with industry trends (Syles, Health, Maintenance, etc.), • Properly cut, trim, and shave hair using basic and advanced techniques and professional equipment while keeping the area and client cleanCompany DescriptionDid you know that HVS was designed with you in mind? The HVS Incubator: 1.) Identify your value ladder as a Hair care professional 2.) Learn how to present your skill sets in a way that is clear and approachable 3.) Have a professional studio to build notoriety and clientele with the infrastructure you need to succeed. Most importantly: HVS is a safe space to sharpen your skills and learn new stylesDid you know that HVS was designed with you in mind?\r\n\r\nThe HVS Incubator:\r\n1.) Identify your value ladder as a Hair care professional\r\n2.) Learn how to present your skill sets in a way that is clear and approachable\r\n3.) Have a professional studio to build notoriety and clientele with the infrastructure you need to succeed.\r\n\r\nMost importantly: HVS is a safe space to sharpen your skills and learn new styles

Job DescriptionCompany Description Applus+ IDIADA is a global partner to the automotive industry, supporting its clients in their product development activities by providing design, engineering, testing and homologation services. As a TOP Employer certified company, we have a large team of more than 3000 professionals drawn from over 22 countries, as well as an international network of subsidiaries and branch offices in 25 countries which ensures that our clients get customized, added-value solutions. IDIADA offers you the opportunity to develop a career in one of the worldwide leading automotive engineering companies. At Applus IDIADA we are looking for talent to help us shaping the mobility of tomorrow with safer, more efficient, and sustainable vehicles. With presence in 22 countries, we offer job positions around the world and internal / transversal mobility within the company. The automotive sector is currently living a moment of deep technological change. At IDIADA, we focus on constant innovation to adapt our services’ portfolio to an ever-changing environment. Therefore, as part of our team, we expect you to be dynamic and eager to learn and grow with us. If you want an opportunity to challenge yourself and enhance your technical skills, to work in a thriving environment and to work alongside world-leading experts, then apply for one of our vacancies. Job Description Driver Operator Applus IDIADA is seeking Driver Operators to join our team. The ideal candidate is technically adept and possesses general knowledge of the automotive industry and its products. The driver would be responsible for gathering data to customer specifications across North America, and documenting observations in a clear and detailed manner through our Data Acquisition system. Responsibilities • Carry out various driving services on vehicles in line with customer specifications., • Drive and operate vehicles across a pre-defined routes through various terrain and weather conditions., • Perform predatory activities before shift, including but not limited to inspection of the vehicle before and after shift completion., • Manage data acquisition systems to ensure accurate data retrieval., • Drive vehicles in a safe manner and following traffic regulations., • Follow instructions provided by project manager., • Perform reporting activities daily and when required by the program manager., • Maintain all documentation with utmost confidentiality., • High School diploma, • 7-10 years of licensed driving experience, • Must have current, unexpired Driver's License and a clean driving record for a minimum of 3 years., • Experience working with ADAS features highly preferred. Additional Information Job Functions: • Must be physically able to support test preparation and execution in an outdoor environment., • Must have a flexible schedule and be able to work extended hours and weekends., • Possess a valid driver’s license and clean vehicle driving record., • Meet all workplace health and safety requirements and practices. Applus IDIADA is committed to equality, diversity and inclusion. We don’t put limits on you, so don’t put limits on yourself either. There is a place for everyone.

Job Description We are looking for a detail-oriented Administrative Program Coordinator to join our team located in the Greater Philadelphia Region. In this long-term Administrative Program Coordinator contract position, you will play a vital role in managing daily operations and ensuring the smooth execution of administrative tasks. The ideal Administrative Program Coordinator candidate will demonstrate exceptional organizational skills, maintain confidentiality, and thrive in a fast-paced environment. What you get to do every single day: • Process a high volume of student document requests, including Letters of Good Standing and Certificates of Malpractice, while ensuring compliance with partner institution standards., • Assist in completing elective student applications during peak periods, managing over 150 applications efficiently., • Coordinate the evaluation process by capturing and inputting student evaluations into designated systems., • Provide support for exam proctoring and ensure smooth execution of testing procedures., • Prepare and distribute monthly student rosters to affiliated institutions in a timely manner., • Manage operations of student application platforms, creating resources to assist students in navigating systems and program logistics., • Monitor daily submissions on application platforms, address incomplete portfolios, and verify student credentials., • Facilitate the distribution of essential student documents, including health records, insurance forms, and credentials, to relevant organizations and supervisors., • Draft and oversee correspondence, reports, memoranda, and technical materials, including composing letters and managing mail routing., • Perform additional administrative duties as assigned to support program operations. Other requirements for the Administrative Program Coordinator position include and are not limited to: • Demonstrated experience in a high-demand administrative role, showcasing excellent organizational and multitasking abilities., • Proficiency in Microsoft Suite and Google Workspace to manage tasks and communications effectively., • Familiarity with platforms such as Banner, Blackboard, and E-Value is preferred but not required., • Strong skills in calendar management, scheduling, and project coordination., • Ability to handle sensitive information with discretion and maintain strict confidentiality., • Exceptional communication skills, both written and verbal, to interact with stakeholders and students., • Proven ability to work independently and collaboratively in a fast-paced environment., • Experience in answering inbound calls and providing administrative assistance to support program needs. Interested candidates should reach out to Hayley Master at 215.568.4580 and reference JO# 03720-0013288323

Working in a fast-paced environment, they will be integral to providing technical direction to grow and scale Cloudera's business solutions in a way that integrates and enhances Cloudera's lines of business including: Product, Marketing, Enablement, Channels/Alliances, Value & Industry and field tea

Job DescriptionThe Thermal Processor Operator will be responsible for the operation and daily maintenance of the SAREX MX2000 Thermal Processor. Hired applicants will undergo Operator training. Duties will include: · Operate Equipment using Delta V DCS controller. Training will be provided. · Daily maintenance. · Equipment Repair. Technical support will be provided. · Feed Rate, Vapor Recovery System (VRS) and Moisture Control adjustments· Instrumentation maintenance. Technical support will be provided. · Sampling of Sludge Feed and dry product· Monitor Oil/Water Separator (OWS), VRS, Air Chiller unit, Carbon Packs· Feed SAREX MX2000 Thermal Processor with Cat 307.5 Tracked Excavator· Site cleanup and support· Boiler Operation. Black Seal Training Provided. Qualifications and Education Requirements · 2 year technical AA degree or equivalent experience.· Industrial Work experience· 40 hour Haz Mat Training will be provided Additional relevant Skills · Mechanical maintenance Experience· N2 water Treatment License· Black Seal Boiler operations license· Class B CDL license Applicant will undergo training.

Job DescriptionCentrifuge Operator/Technician: Full Time only The Centrifuge Operator will be responsible for the operation and daily maintenance of the SAREX MX1500 Three Phase Solid Bowl Decanter Centrifuge. Hired applicants will undergo Operator training. Duties will include: · Daily Centrifuge Equipment maintenance.· Equipment Repair. Technical support will be provided· Feed Rate adjustments, Bowl Speed and differential scroll speed adjustments· Monitor Flow rates. · Sampling of Sludge Feed, Water, Oil Product and wet cake solids· Emulsion breaker and Polymer dosing adjustments· Instrument Maintenance. Technical support will be provided· Gauge Frac tank and process Tank levels· Frac Tank Management · Dissolved Air Floatation (DAF) Operations · Site cleanup and support Qualifications and Education Requirements · 2 year technical AA degree or equivalent experience· Industrial Work experience· 40 hour Haz Mat Training will be provided Additional relevant Skills · Mechanical maintenance Experience· N2 water Treatment License· Black Seal Boiler operations license· Class B CDL license

Job Description We are seeking a Mobility Service Representative to join our team! You will be responsible for helping customers by providing product and service information and resolving technical issues. Responsibilities: • Handle customer inquiries and complaints, • Provide information about the products and services, • Troubleshoot and resolve product issues and concerns, • Document and update customer records based on interactions, • Previous experience in customer service, sales, or other related fields, • Ability to build rapport with clients, • Ability to prioritize and multitask, • Positive and professional demeanor, • Excellent written and verbal communication skillsCompany DescriptionElectric Mobility is a new company dedicated to enhancing the mobility and comfort of elderly consumers through the sales of electric mobility scooters and lift chair recliners. What sets Electric Mobility apart is its established presence in the UK, where the company has successfully sold the same products it aims to introduce to the US market. This existing relationship provides a significant competitive advantage, as the products are market-ready and not currently available in the US. Additionally, the company benefits from pre-existing marketing assets, facilitating a quicker entry into the market. Electric Mobility is committed to maintaining a lean infrastructure, which allows for cost effective operations. The company differentiates itself by prioritizing exceptional customer service and providing user-friendly product instructions, guides, and manuals—elements that are often lacking in the offerings of competitors. This focus on customer experience positions Electric Mobility as a leader in the electric mobility sector, dedicated to meeting the unique needs of elderly consumers.Electric Mobility is a new company dedicated to enhancing the mobility and comfort of elderly consumers through the sales of electric mobility scooters and lift chair recliners. What sets Electric Mobility apart is its established presence in the UK, where the company has successfully sold the same products it aims to introduce to the US market. This existing relationship provides a significant competitive advantage, as the products are market-ready and not currently available in the US. Additionally, the company benefits from pre-existing marketing assets, facilitating a quicker entry into the market. Electric Mobility is committed to maintaining a lean infrastructure, which allows for cost effective operations. The company differentiates itself by prioritizing exceptional customer service and providing user-friendly product instructions, guides, and manuals—elements that are often lacking in the offerings of competitors. This focus on customer experience positions Electric Mobility as a leader in the electric mobility sector, dedicated to meeting the unique needs of elderly consumers.

Job Description IVI RMA is looking for a Clinical Assistant for our Center City, Pennsylvania location. This is a full-time role Monday through Friday from 6:45am-3:30pm with weekend rotation. The Clinical Assistant will promote and restore patients’ health by assisting in the nursing process and supporting physicians and other multidisciplinary team members with hands-on patient care. You will help to create a positive experience for our patients and ensure that patients receive high-quality service by assisting clinical team with patient care. Essential Functions and Accountabilities: • Assist Physicians with clinical procedures, • Follow proper protocols for all procedures, • Practice phlebotomy, • Accurately document ultrasound measurements, provider comments and use appropriate stim templates while chaperoning ultrasounds., • Clean exam rooms and equipment per protocol., • Set up and stock examination and procedure rooms., • Maintain clinical supplies inventory., • Specimen collection, processing for in-house and outside laboratories., • Manage Lanfax for outside labs, reports, results. Enter results and email to provider team for review., • Provide patients with information regarding upcoming procedures and reassurance/comfort before, during and after procedures. Academic Training: • Completion of Certified Medical Assistant Program – preferred, • Studies level: Certification, • Studies area: Nursing/healthcare assistant, • Phlebotomy Program – preferred, • Studies level: Certification, • Studies area: Phlebotomy Program Position Requirements/Experience: • 6+ months experience as a Medical Assistant in a physician practice, • Prior experience in women’s healthcare – preferred, • knowledge of Microsoft Office, especially Outlook and Excel – required, • EMR experience - preferred IVI-RMA offers a comprehensive benefits package to all employees who work a minimum of 30 hours per week. • Medical, Dental, Vision Insurance Options, • Retirement 401K Plan, • Paid Time Off & Paid Holidays, • Company Paid: Life Insurance & Long-Term Disability & AD&D, • Flexible Spending Accounts, • Employee Assistance Program, • Tuition Reimbursement About IVIRMA Global: IVIRMA is the largest group in the world devoted exclusively to human Assisted Reproduction Technology. Along with the great privilege of providing fertility care to our patients, IVIRMA embraces the great responsibility of advancing the field of human reproduction. IVIRMA Innovation, as one of the pillars of IVIRMA Global, is a renowned leader in fertility research and science. Check out our websites at: & EEO “IVIRMA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: IVIRMA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at IVIRMA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion and/or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. IVIRMA will not tolerate discrimination or harassment based on any of these characteristics. IVIRMA encourages applicants of all ages.”

Job Description POSITION OVERVIEW The Vice President of the Office of Research Strategy is responsible for the development, strategic oversight, and administration of the organization's portfolio of assessment research initiatives. This role ensures alignment with institutional goals and serves as the primary research subject matter expert on the innovation leadership team. The VP fosters a culture of innovation internally and promotes collaboration with the external research community. Working collaboratively with internal functional units, the VP will lead initiatives to develop or evaluate assessment capabilities and define constructs necessary to support existing and enable new assessment products. This role is critical to enhancing NBME's research capabilities, driving innovation, and ensuring effective use of resources in support of research activities. Join us to lead transformative research initiatives and make a lasting impact on the future of assessment and education. This role has been designated as primarily remote, meaning it requires little to no onsite attendance. While this role can be designated as remote, you are offered the flexibility to select if you prefer to work primarily remotely, hybrid, or onsite. Only candidates residing in DE, MD, NJ, or PA will be considered At NBME, we continue to innovate and improve how we fulfill the evolving needs of the healthcare community. This commitment starts and ends with the people at NBME. By recruiting and empowering talented individuals from various disciplines and backgrounds, which includes professionals with diverse life experiences, abilities, and perspectives, NBME can take a well-informed, robust approach to advancing medical education and assessment for years to come. RESPONSIBILITIES • Lead, mentor, and manage research resources: Recruit, manage, and support research team members to achieve their full potential. Foster professional development and ensure a collaborative and innovative work environment. Manage resources effectively to support research activities., • Research policy, administration, and priorities: Oversee research administrative policy and develop processes for implementation. Create schema for classifying and tracking research initiatives. Periodically assess research priorities and recommend modifications based on progress, trends, and organizational needs., • Strategic leadership : Provide the strategic direction for the research agendas and work to develop new, creative approaches to innovation research. Align research initiatives with NBME strategic priorities. Serve as the primary research subject matter expert on the innovation leadership team. Stay current on assessment and data science best practices. External Engagement: Enhance NBME reputation by raising the external visibility of our research achievements. Develop relationships with the medical education and assessment research communities to identify collaboration opportunities. Develop strategic approach to presentation and publishing. Lead or consult on research agendas as principal investigator where appropriate. Present and publish research in academic forums.Leverage media opportunities and educate internal staff. QUALIFICATIONS Skills and Abilities • Deep understanding of assessment best practices and trends, preferably in medical education and healthcare assessment., • Strong leadership and strategic vision to align research initiatives with institutional goals., • Excellent collaboration and networking skills with internal and external stakeholders., • Proven ability to communicate complex concepts clearly and effectively to both technical and non-technical audiences, in both written and verbal formats., • Innovation and problem-solving skills for developing and evaluating new assessment capabilities., • Expertise in leading, mentoring, and managing research resources. Experience • Requires a minimum of 8 years of progressive managerial experience, demonstrating strong business acumen and the leadership capabilities necessary to head a major function or division. Education • Doctoral degree (Ph.D., M.D., J.D, Ed.D), • Certified Research Administrator (CRA) designation is desirable About NBME: NBME is a not-for-profit organization that specializes in the creation of assessments and learning tools for physicians and health professionals. Our mission is to advance assessment of these professionals to achieve optimal care for all, supporting the development of a highly effective, diverse and compassionate health care workforce. Founded in 1915, NBME develops and manages the United States Medical Licensing Examination® with the Federation of State Medical Boards. We offer a comprehensive portfolio of assessment products for every stage of the medical school journey and provide assessment services to various health profession organizations. We are dedicated to advancing innovative assessment approaches through research, collaboration and contributions to the medical education and assessment communities. In 2024, we expanded our assessment capabilities to include simulation through the acquisition of MedVR Education. Learn more on NBME's website. NBME's Community Collaborations and Contributions NBME believes that a key path to meeting our mission is collaborating with and supporting our communities. Our Community Collaborations and Contributions programs provide resources and recognition to medical educators and researchers advancing the field of assessment throughout their careers. In addition, we invest in fee assistance, scholarships and pathway programs to aid learners and help support increased representation in health care. Headquartered in Philadelphia, NBME also gives to local organizations that advance health equity and access and positively impact social determinants of health. Compensation we are offering for this position is at $235,809-294,761/year. Please note that the offered rate for this position typically aligns with the minimum to midrange of this grade, but it can vary based on the successful candidate's qualifications and experience, department budget, and an internal equity review. The NBME offers competitive salaries, excellent benefits, and a rewarding work environment. Excellent Benefits include: Healthcare, Dental, Prescription, and Vision plans; 401(k) w/match, Tuition Reimbursement Plan, Commuter Benefit: Public Transit or Parking options. Remote Friendly Workplace. NBME is an Equal Opportunity Employer. We will consider all qualified applicants for employment without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Job Posted by ApplicantPro

Job Description We are hiring a Service Technician for the Philadelphia region with an emphasis on Flow Cytometer tasks. This role operates both in the field as well as in the local office. Service Technician responsibilities include maintaining schedules for preventative maintenance inspections and installations, as well as responding to repair activities for both warranty and post-warranty instruments. The Service Technician is expected to proficiently troubleshoot, repair, and ensure optimal instrument performance while completing installations, repair, updates, inspections, and all necessary field reporting in a timely manner. Occasional service support outside the assigned territory may be required. Duties and Responsibilities: • Successfully completes all mandatory training on flow cytometers and other lab instruments relevant to the assigned territory., • Capable of interpreting instrument performance verification data and taking corrective action as necessary to optimize instrument performance., • Independently repairs instruments of moderate complexity, meeting repair metrics defined by the Service Organization., • Ensures customer satisfaction by demonstrating confidence in CGT products and services through professional workmanship and demeanor., • Maintains a professional appearance, behavior, and communication style at all times., • Minimum 2 years of experience working on repair and service of Cytek Flow Cytometers, • Strong technical skills and proficiency in diagnosing and repairing lab equipment., • Excellent problem-solving and analytical abilities., • Flow Cytometry experience is a MUST., • Associates or Bachelor's degree in Electronics, Engineering, or related technical or biological discipline., • Previous Field Service Engineer experience advantageous., • Proficiency in MS Office applications and PC operating systems. Work Environment: This position is based at Philadelphia PA. Surplus Solution is an equal opportunity employer and encourages individuals from all backgrounds to apply. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Job Type: Full-time Pay: $65,000.00 - $85,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Company DescriptionCertified Genetool / SSLC is a fast-growing biotech equipment solution leader, delivering recertified, state-of-the-art lab instruments that empower drug R&D companies and laboratories to accelerate innovation and bring life-changing discoveries to market faster.Certified Genetool / SSLC is a fast-growing biotech equipment solution leader, delivering recertified, state-of-the-art lab instruments that empower drug R&D companies and laboratories to accelerate innovation and bring life-changing discoveries to market faster.

Job Description Chester Community Coalition is seeking a Violence Prevention Data Coordinator to join our trauma-informed gun violence treatment and prevention efforts. The ideal candidate will be responsible for compiling, verifying, and analyzing data related to clinical, provider, and senior management requirements. The candidate will define and verify consistent, reliable datasets for use by all Chester Community Coalition departments. Daily tasks will include building out and monitoring Apricot 360 case management system for data collection, creating reports using various reporting tools, providing utilization and outcome analysis, analyzing data for quality improvement studies, maintaining and automating reports, and preparing executive-level reports summarizing financial impacts of quality improvement and cost savings initiatives. Key Responsibilities: • Compile, verify, and analyze hospital, community, and service data, • Define and verify consistent, reliable datasets for use by all Chester Community Coalition departments, • Build out and monitor Apricot 360 case management system for data collection, • Create reports using various reporting tools, • Provide utilization and outcome analysis, • Analyze data for quality improvement studies, • Maintain and automate reports, • Prepare executive-level reports summarizing financial impacts of quality improvement and cost savings initiatives, • Execute secure and effective data procedures, • Collaborate with other team member, technical specialists, project managers, and data analysts, • Maintain the integrity of data that contains Personally Identifiable Information, • Always ensure adherence to legal standards and regulations, • Manage and oversee the translation of figures into other languages, and/or metrics when necessary, • Maintain the inventory of servers such as flash drives, storage disks and other data storage devices Qualifications: • B.S. or higher degree in data science, mathematics, statistics, or another analytical field of study, • 1 or more years of clinical/healthcare experience, • Familiarity with coding practices, • Understanding of delivery and reimbursement of mental health services, • Strong problem-solving, quantitative, and analytical skills, • Proficient in using business intelligence query tools, computer spreadsheet (Excel), and database languages (Access and others at an advanced level), • Strong working knowledge of SQL, • Excellent organizational skills Employment includes health benefits and paid time off. All interested and qualified applicants should submit a cover letter and resume. NOTE: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the job. We are an organization where everyone pitches in to get done what needs to be done.

Job Description If you are passionate about automobiles, Elite Vehicle Solutions seeks Automotive Electronics and Accessory Installers. Technicians conduct installations, de-installations, and repairs of automotive electronics using company-approved methods and workmanship standards. Technicians also must know how to install cages, seats etc. etc. Location: Central NJ. We service government agencies and private fleets with vehicle upfits such as emergency lighting and advanced technology. Work hours are Monday through Thursday, 6:30 AM to 5:00 PM, with overtime available. Responsibilities: * Installation of Automotive Electronics and Accessories. * Maintain proper service paperwork. * Maintain customer relations on an operational level. * Provide technical assistance to client personnel and customers with product functionality. Preferred but not required: * A passion for automobiles and interest in building emergency vehicles or other 12-volt installations such as navigation systems, car alarms, or stereo preferred. * Must possess a Valid Driver's License. * Ability to make individual quality decisions independent of direct supervision, set proper task priorities, and efficiently manage time and company resources. * Excellent problem-solving skills * An interest in mobile electronics or other 12-volt installations, including lighting systems, car alarms, car stereos/audio, etc. * Other technical training and experience will be considered. * A background in electronic components, the automotive industry, and equipment maintenance is a plus. Job Type: Full-time Pay: $20.00 - $25.00 (experienced) per hour (depending on experience and qualifications). Benefits: * Health insurance * Matching 401K * Paid time off * Schedule: * 10-hour shift * Monday to Thursday * Some Friday (Voluntary) Education: * High school or equivalent (Preferred) Experience: * 12-volt mobile electronics: 2 years (Preferred) License/Certification: * Driver's License (Required) Company DescriptionElite Vehicle Solutions is a rapidly growing company with room for career growth. We service fleets and government agencies throughout NJ, PA, NY and DE. We are built to scale up to fit the demands of our growing customer base and are looking for the right people to help us grow. We are looking for career-minded candidates.Elite Vehicle Solutions is a rapidly growing company with room for career growth. We service fleets and government agencies throughout NJ, PA, NY and DE. We are built to scale up to fit the demands of our growing customer base and are looking for the right people to help us grow. We are looking for career-minded candidates.

Job Description M&C are seeking a Customer Service Specialist to join our team! You will be responsible for helping customers by providing product and service information and resolving technical issues. Responsibilities: • Handle customer inquiries and complaints, • Provide information about the products and services, • Troubleshoot and resolve product issues and concerns, • Document and update customer records based on interactions, • Previous experience in customer service, sales, or other related fields, • Ability to build rapport with clients, • Ability to prioritize and multitask, • Positive and professional demeanor, • Excellent written and verbal communication skillsCompany DescriptionM&C Insurance prides itself on being a trusted independent insurance agency. M&C has been in business serving New Jersey and Pennsylvania for 40 years. M&C has 3 locations in Camden, Pennsauken, and Mt. Laurel. We are seeking a licensed insurance agent(s) to join our growing team. The right candidate for this job is social but serious, fun but focused, and has a drive to be successful.M&C Insurance prides itself on being a trusted independent insurance agency. M&C has been in business serving New Jersey and Pennsylvania for 40 years. M&C has 3 locations in Camden, Pennsauken, and Mt. Laurel. We are seeking a licensed insurance agent(s) to join our growing team. The right candidate for this job is social but serious, fun but focused, and has a drive to be successful.

Job Description The Sporting Club at The Bellevue features nearly 100,000 square feet of health, fitness, athletic and social facilities. The facility includes a basketball and pickleball court, state of the art fitness equipment, private saunas, an indoor Olympic sized pool, and various fitness classes. Additionally, the club features 2 squash courts and a golf pavilion with 3 simulators, a hitting net and putting green. Recently, the Sporting Club has gone through a complete renovation transforming it into the ultimate health and wellness destination in Philadelphia. The Sporting Club at The Bellevue has an exciting opportunity for a Housekeeper to join our growing team. We are looking for energetic, friendly, and experienced professionals who can ensure the cleanliness, order and tidiness of The Sporting Club’s facility, bathrooms, locker rooms, fitness floor and equipment. Our Housekeepers also need to provide exemplary customer service to our members and guests. Primary Responsibilities: • Conduct daily, weekly, monthly cleaning of the Club’s bathrooms, locker rooms, massage rooms, pool, fitness floor, by following the task list, adhering to the highest standard of cleanliness and sanitation to provide a safe and healthy environment for members, guests, and staff, • Collect trash from all receptacles on all floors, • Monitor and stock all bathroom and locker room supplies, • Mop wet areas, hallways and whirlpool area, • Clean and organize storage and laundry, • Replace locker room consumables as needed, • Vacuum carpet, spot clean when stained, • Clean water cooler, • Notify Operations Manager of any work orders that need to be sent, • Other duties as assigned Position Requirements: • Prior experience in cleaning and laundry services preferred, • Current CPR/AED and first aid certification is a plus, • Ability to work flexible schedule including early mornings, late nights, and weekends on a regular basis Technical Skills/Knowledge: • Excellent communication skills, • Must be able to work in a team environment, • Ability to work independently with minimal supervision, • Excellent attention to detail, • $18.00/hour, • Medical, dental, and vision insurance

Job DescriptionBenefits: • Competitive salary, • Health insurance, • Competitive Compensation, • Paid Time Off Reporting directly to our Customer Service Manager, you will be responsible for reviewing all details on customer orders to smoothly transition then into our production process. This role entails engaging in daily conversations whether face-to-face, over the phone or via email - with internal and external customers to verify product specifications and record all order details. Strong communication skills with attention to detail and the ability to work independently are essential. Candidates must be comfortable working both independently and as part of a team, with a proven ability to thrive in either setting Responsibilities • Process and manage incoming orders with precision for protective clothing from customers using Excel, Word, Inventory system and cutting machine software., • Learn all product lines to review order specifications to ensure compliance with product configurations and customer requirements., • Prepare orders for collaboration with purchasing, design, finance, and production to ensure smooth order fulfillment., • Create production identifier documents; garment labels using specialized software and printer; and prepare shipping labels and order tracking through UPS, • Maintain accurate records of customer interactions and transactions., • Communicate with customers via email regarding order status, changes and timelines., • Routinely send dealer invoices, verifying pricing and information., • Address warranty issues and customer returns via return material authorization process with the ability to lift 20-30lbs periodically to move garments., • Follow, update, and maintain procedures when applicable., • Support periodic physical inventories, counting components for protective clothing., • Other duties as assignedQualifications, • Associates degree; or equivalent combination of experience, education, and training., • 2+ years of experience in customer service working with a technical product with detailed specifications, order processing and administrative support., • Proficiency in Microsoft Excel comfortable with moving data, formulas, and conditional formatting (test will be required), • Strong written communication skills and analytical skills with attention to detail., • Ability to work independently and manage multiple priority projects with strict deadlines., • Experience working in Microsoft Outlook managing a shared mailbox.

Job DescriptionDescriptionUrgentVet bridges the gap between daytime general practice and emergency/overnight care in the Newtown, Pennsylvania area. We offer after-hours care for canine and feline patients without the additional expense of emergency clinic fees. Our single-doctor shifts offer care for common urgent cases, including wound management, ear infections, vomiting/diarrhea, and euthanasia. Each of our paperless clinics is specially designed to deliver efficient care and equipped with cloud-based EMR, digital x-ray, and a full suite of IDEXX in-house lab equipment. • Flexible Schedule, • Swing/Second Shift, • ONLY Urgent Care – no wellness at all!, • No Abdominal Surgeries, • Fear Free Approach, • Feline Friendly Practice, • Strong Technical Team & Support, • Flexible Schedule (we're so serious we put it twice!), • Brand New & Modern Hospitals Click here to take a virtual tour of our clinic! Key Responsibilities • Serve patients and clients with a relationship-based approach, • Collaborate and engage with the clinical team and leadership, • Grow relationships within the practice and the Philadelphia community, • Encourage the growth of support staff members through our internal LevelUp training program, • DVM/VMD degree from an AVMA accredited college (or successful completion of the ECFVG or PAVE program), • Active license in good standing to practice in the state in which candidate will be employed (or the ability to obtain a license in that state) Benefits • Paid Continuing Education (CE) Days & Allowance, • Paid State Licensing Fees, • Paid AVMA and State Professional Dues, • Covered Professional Liability Insurance (PLIT), • Additional Holiday Pay on Holiday Shifts, • Optional Pro-Sal with No Negative Accrual, • Significantly Discounted Personal Veterinary Care – Multiple Pets!, • Personalized & 1:1 Mentorship, • Internal Veterinarian Collaboration & Consultations Platforms, • Flexible Compensation Package, • Healthcare Packages & Retirement Match, • 3 Weeks PTO, 6 weeks of paid Parental Leave (for both parents!), Work/Life Balance day off annually

Job DescriptionDescriptionUrgentVet bridges the gap between daytime general practice and emergency/overnight care in the Philadelphia, Pennsylvania area. We offer after-hours care for canine and feline patients without the additional expense of emergency clinic fees. Our single-doctor shifts offer care for common urgent cases, including wound management, ear infections, vomiting/diarrhea, and euthanasia. Each of our paperless clinics is specially designed to deliver efficient care and equipped with cloud-based EMR, digital x-ray, and a full suite of IDEXX in-house lab equipment. • Flexible Schedule, • Swing/Second Shift, • ONLY Urgent Care – no wellness at all!, • No Abdominal Surgeries, • Fear Free Approach, • Feline Friendly Practice, • Strong Technical Team & Support, • Flexible Schedule (we're so serious we put it twice!), • Brand New & Modern Hospitals Click here to take a virtual tour of our clinic! Key Responsibilities • Serve patients and clients with a relationship-based approach, • Collaborate and engage with the clinical team and leadership, • Grow relationships within the practice and the Philadelphia community, • Encourage the growth of support staff members through our internal LevelUp training program, • Manage a varying caseload, including surgeries and appointments during our open hours Skills, Knowledge, and Expertise • DVM/VMD degree from an AVMA accredited college (or successful completion of the ECFVG or PAVE program), • Active license in good standing to practice in the state in which candidate will be employed (or the ability to obtain a license in that state) Benefits • Paid Continuing Education (CE) Days & Allowance, • Paid State Licensing Fees, • Paid AVMA and State Professional Dues, • Covered Professional Liability Insurance (PLIT), • Additional Holiday Pay on Holiday Shifts, • Optional Pro-Sal with No Negative Accrual, • Significantly Discounted Personal Veterinary Care – Multiple Pets!, • Personalized & 1:1 Mentorship, • Internal Veterinarian Collaboration & Consultations Platforms, • Flexible Compensation Package, • Retirement Match, • 3 Weeks PTO

Job Description WHO WE ARE VEG is a rapidly growing emergency company with hospital locations across the United States. Our mission is helping people and their pets when they need it most. We are revolutionizing emergency medicine with a "customer first" mentality and a true, employee-centric work environment. TALENT + CULTURE AT VEG At VEG, we want people and their pets to feel safe, secure, and valued; we want our employees to feel the same way. What we're aiming to achieve on the customer side is equivalent in nature to what we want for our employees: to have the best experience possible. With the highest NPS score in our industry, we're ready to ensure that VEG remains the place where the best and brightest in the emergency world not only want to work, but stay and grow. For our customers and their pets, we strive to find a way to say, "yes." We do the same and more for our teams. In fact, VEG is one of this year's nominees for INC Magazine's Best Places to Work! Mission: VEG Travel Veterinary Nurses complete heroic helping at high-need VEG Hospitals, regionally with an option for national assignment. We are Helping People and Their Pets When They Need it Most. Vision: 1. VEG Travel Nurses are effective communicators, culture ambassadors, adept at working in new locations with new teams, yearning to travel frequently and aim for advanced nursing skills., 2. Contribute as a team member to incoming outpatient care and ongoing inpatient care., 3. Aid in managing patient care workload to ensure the patients are receiving uncompromised care. Essential Functions & Responsibilities: The VEG Travel Team Nurses spread the VEG way while providing gold-standard medicine to their patients. They arrive at VEG hospitals with a great attitude and encourage others to excel. Travel Nurses share talents in advanced skills, cover shifts for hospitals with an urgent need, and provide feedback to VEG leadership about concerns the hospital team may have. Due to the advanced nature of this position, all VEG Travel Team Nurses must be proficient in these precursory skills: ● Setup, support and restocking of procedural nursing tasks and techniques ● Infection control with facility support ● Preparation of laboratory samples including running benchtop analyzers ● Restraint and handling of non-compromised patients ● Filing prescriptions ● Perform nursing care tasks such as subcutaneous, intramuscular, and intravenous injections ● Ability to perform non-complicated radiologic imaging ● Skills in anesthesia including induction, maintenance, support and recovery of ASA I - III patients ● Identify major pharmacological drug families including drug calculations and formulary research Level 3 ● Placement, care and troubleshooting of advanced catheters (urinary, nasogastric, nasal oxygen) ● Ability to perform manual and kit-based blood typing and crossmatch including blood transfusions ● Clinical proficiency in management of ASA I - III cases with little oversight ● Advanced pharmacological understanding of drug classifications, categories and mathematical calculations including CRIs and drugs administered through microtitrations (syringe pump) Level 4 ● Nursing skills in the characterization and understanding of abnormal heart and lung sounds, pain status and mentations ● Advanced vascular access including intraosseous catheterization and central lines ● Able to support compromised anesthetic case management in ASA VI - V cases Non-Technical Skills ● Ability to work with people that come from different backgrounds and have various personalities ● Upbeat, positive attitude ● Dedication to the VEG way ● Ability to function autonomously when needed ● Strong, flexible communication skills ● Strong organizational skills Non-Technical Skills : • Ability to work with people that come from different backgrounds and have various personalities, • Upbeat, positive attitude, • Dedication to the VEG way, • Ability to function autonomously when needed, • Strong, flexible communication skills, • Strong organizational skills Required Skills & Experience: ● 5+ years of experience in a veterinary technician role. ● 2+ years experience in emergency. ● AS or BS in Veterinary Technology, graduate from an AVMA Accredited Program. ● Must have or have the ability to get CVT, LVT, LVMT, RVT, RVN as credentials in the state(s) of practice. ● Veterinary technician specialist (VTS) certification is a plus and will lead to additional considerations in compensation. ● Must be able to travel regionally and open to National travel (90/10% regional/national but can be up to 20% for short durations), must be flexible with scheduling and reliable to organize their own travel arrangements. ● Basic computer skills to use practice management, electronic medical record, and collaboration software. ● Ability to read, speak and hear sufficiently to understand, complete tasks instructed in all forms of communication, written, verbal, or other. ● Provide information in person & over the phone communicating clearly, appropriately & professionally. ● Properly communicates information to all personnel including management, medical staff & customers. ● Fine motor skills adequate for utilizing hospital equipment necessary daily such as syringes, electric clippers, computers, surgery instruments, monitors, diagnostic equipment, etc. ● Must be willing to work in a noisy environment with strong or unpleasant odors. ● Ability to stand for prolonged hours, kneel, work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance. ● Flexibility to work nights, weekends and Holidays ● Be able to work well in a fast-paced environment with all personality types. ● Must have a valid US issued driver's license and access to a vehicle for required regional travel needs. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. A Safe Place for All: VEG celebrates diversity and is committed to creating an inclusive workplace that represents a variety of backgrounds, perspectives, and skills. We're dedicated to inclusiveness and provide all the resources and benefits you need to grow your career and reach your potential. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Mobility City Technicians deliver, repair and set up mobility equipment in customers’ home. Technicians also instruct customers in the use of equipment. Technicians may also remove used or damaged equipment. Essential Functions/Primary Responsibilities: • · Deliver Durable Medical Equipment (DME) and supplies to customers home and perform install/setup up tasks, • · Instruct customer on proper use of equipment, • Evaluate malfunctioning/broken equipment and recommend a repair/solution., • Document the repair and solution. If additional parts are needed beyond initial service call, document as needed., • · Install new/repaired parts to restore equipment to proper safe, working order, • · Read and understand the service call requirements (e.g., Location, obstacles/challenges to install setup, payor information, etc.) prior to arrival., • · Ensure home environment/space is safe for delivery, installation, and use of equipment., • · Obtain signature from customer on delivery/install paperwork., • · Pick up and remove equipment from customers’ residence if requested. Generally, as part of the service call, • · Clean and sanitize equipment in accordance with Mobility City policy and guidelines. · Participate in continuing education/training in-services relative to products that Mobility City sells, delivers, and services. Minimum Qualifications: Required: · High School diploma or GED Mechanically inclined · Current valid driver’s license · Pass criminal background check. Preferred: But not required • Prior experience repairing, delivering, and installing DME equipment. Analytical ability to diagnose/troubleshoot problems with mobility equipment. Evaluate moderate electrical components/systems and determine cause of issue and determine solution. Communication and interpersonal skills for frequent contact with customers as well as stakeholders external to Mobility City. A mastery of a variety of communication modalities is required to include leading diagnosis, making formal recommendations for repairs/solutions, and reading/interpreting documents. Project/task management skills including the ability to define program, project, or process/repair objectives. Identify customers/stakeholders and their needs and plan/coordinate delivery/repair steps, coordinate and allocate technical and fiscal resources to accomplish goals and objectives in a resourceful yet timely manner. Leadership skills including demonstrated willingness to pursue opportunities/roles with increasing levels of accountability. Comfort with decision-making responsibilities, coaching and the ability to inspire and build confidence in others (including customers and stakeholders). A basic level of technical knowledge of how mobility equipment works and troubleshooting techniques for efficient resolution of problems. Comprehensive knowledge of applicable guidelines relative to mobility equipment. Proficiency in the use of personal computers, demonstrated competence with word processing, database, and spreadsheet software. Physical/Mental Demands and Work Environment: The physical/mental demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job: · Ability to regularly stand, talk, bend, stretch, pull, or push and lift items of a minimum of 50 pounds without assistance. Ability to climb stairs and drive a vehicle. · Use hands to handle, control, or feel objects, tools, or controls. · Ability to frequently communicate with customers, families, co-workers, etc. Must be able to exchange accurate information in given situations. · Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. · Some tasks require client contact in the customer’s home which may include exposure to dirt, dust pollen, odors, wetness, humidity, rain, sleet, snow. Company DescriptionWe are a mobility company offering delivery and set up services for national manufactures. We also sell and service our own products to Seniors, veterans and those that have mobility issues.We are a mobility company offering delivery and set up services for national manufactures. We also sell and service our own products to Seniors, veterans and those that have mobility issues.

Job DescriptionJob Summary/Company: Our client creates trust in the digital age with integrated security technologies in three business areas: Digital Security, Financial Platforms and Currency Technology. A Field Engineer will use his/her technical expertise and individual judgment to provide customer-site servicing, installation and repair of complex electromechanical equipment and will maintain a high level of customer satisfaction through the use of data-driven tools, proactive attention to customer requirements and positive customer interactions. This position provides support to customers on operational or maintenance aspects of equipment, receives escalated customer concerns on technical and service related problems, diagnoses mechanical, hardware, software, and systems failures using established procedures, determines the most effective repair/resolution to minimize customer downtime, and prepares reports for analysis of product failure trends and serviceability issues. Responsibilities: • Applies company policies and procedures to complete routine tasks., • Responds to service calls promptly, performs maintenance of equipment systems at customer sites and assists operators with operational problems that occur., • Represent our client in a highly professional manner., • Performs all administrative duties including record keeping, reporting, and inventory management in an accurate and timely manner., • Hands on experience with electro-mechanical equipment a plus., • Capabilities should include electro-mechanical troubleshooting ability, understanding of electronic principles, and a working knowledge of computer systems, PC’s and Networking., • Hands on experience with solenoids, belts, rollers, bearings, pneumatics, and guides a plus. This job is In-Person. We offer several comprehensive benefits package including health and life insurance, paid and unpaid time off, and retirement and savings plans to qualifying employees. Download the Sparks Group mobile app from Apple App Store or Google Play. Sparks Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, pregnancy, citizenship, family status, genetic information, disability, or protect veteran status.

Job Description Glaston America, Inc. is actively seeking a field service technician to assist with the installation and technical support of high precision glass processing equipment across North America. Qualified candidates will be skilled in Electrical and Mechanical Engineering in an industrial environment, exhibit strong hands-on mechanical and electrical aptitude, be a team player, and enjoy traveling. Strong interpersonal skills and a customer focus are also critical. Up to 80% travel is required. Our corporate office is located in Cherry Hill, New Jersey although the position is open for any applicants based in the United States. SPECIFIC RESPONSIBILITIES · Field service for Glaston machinery · Installation, start-up, and commissioning of new machinery · Instruct customers on-site in machine operation, safety, and maintenance · Preform preventive maintenance and emergency repairs · Provide technical support to customers QUALIFICATIONS · Technical Trade School or Associates degree in electrical or mechanical engineering with 1-year of experience in an industrial setting · 4-years electrical or mechanical engineering / maintenance experience in an industrial environment in-lieu of a degree · Experience in an electrically based industrial role with a strong mechanical background is preferred, but recent graduates are also eligible and encouraged to apply · Strong problem solving and troubleshooting aptitude · Solid hands-on experience with electrical and mechanical tools · Self starter with demonstrated ability to work efficiently with little supervision · Field service or traveling experience desired · Located within 1 hour of an international airport · Willing to travel for extended periods with short notice including weekend work · Computer literacy including Microsoft Office suite · Experience with PLC logic and CNC systems is beneficial · Fluency in German and/or Spanish is beneficial, but not mandatory Benefits · Hourly non-exempt position starting at $25 - $32 / hour depending on experience · Estimated first year salary $75,000 - $100,000 including over time · 401k retirement plan with company match · Medical, dental, and vision insurance options · 2 weeks vacation, 6 days PTO, and company holidays · Lucrative travel and expenses program · Company issued specialty tools, laptop, uniform, cellphone reimbursement, etc. Company DescriptionGlaston is a company providing high-quality glass processing machines and services for architectural, solar, appliance and automotive applications.Glaston is a company providing high-quality glass processing machines and services for architectural, solar, appliance and automotive applications.

The Sales Engineer will be responsible for providing technical support, sales engineering, effective communication with clients, sales activities, and customer service to ensure client satisfaction in the northeast. QualificationsSales Engineering and Technical Support skillsExcellent Communication

The NSI Field Service Technician provides world-class service and technical support for industrial X-ray equipment, electrical/electronic controls, PC, PLC, and motion controls. Responsibilities:** + Provide customer-facing service and support for industrial X-ray equipment via onsite visits, phone