Technical jobs in Auburn, New YorkCreate job alerts

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance—and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work—quickly and reliably. Key Responsibilities: * Rapidly assess existing antenna and array designs for performance gaps against requirements. * Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. * Recommend and implement design modifications for immediate performance improvements. * Perform accelerated free-space radiation pattern measurements and compare results against simulations. * Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. * Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. * Support urgent production and field troubleshooting, including on-site technical interventions when required. * Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. * Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. * Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. * Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. * Proven ability to mitigate mutual coupling in dense or phased-array configurations. * Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. * Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. * Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. * US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: * Experience with low-observable and conformal antenna designs. * Familiarity with wideband, multiband, and frequency-agile antenna systems. * Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job DescriptionDescription: POSITION SUMMARY Perform receiving, pasteurization, separation, batching, sanitation, clean-in-place, maintenance and record-keeping functions in various manufacturing departments. Comply with NY State Ag & Markets, FDA, USDA, OSHA, and GMP policies. Carry out special projects as required. Perform all tasks in a safe manner to ensure achievement of performance, quality, service, and cost objectives. Comply with all standard operating procedures and requirements as directed by standard manufacturing policies established by the company. POSITION RESPONSIBILITIES • Secure and maintain proper milk sampling license from NYS Ag and Markets, • heck all tankers for proper security and identification upon entering facility., • Sample all inbound and outbound tankers to be tested for Quality clearance., • Work closely with maintenance, laboratory and training personnel to achieve manufacturing objectives., • Enter and report data using established manufacturing procedures, including QA studios., • Participate in and complete necessary training sessions required for the equipment necessary to manufacture finished goods., • Troubleshoot and perform basic maintenance related to all processing equipment., • Maintain proper inventory levels of all manufacturing supplies., • Clean all required equipment throughout the entire manufacturing environment., • Analyze incoming ingredients, blends, and finished products to meet customer specifications., • Perform chemical analysis of incoming and outgoing ingredients to ensure compliance within desired specifications of finished product., • Collect microbiological, chemical and other samples for analysis., • Monitor, adjust and inspect manufacturing equipment to ensure that quality and package integrity are within specifications., • Complete documentation associated with all manufacturing reports., • Ability to research historical data when required and report findings., • Work with engineering, production, quality and sanitation personnel to trouble-shoot quality related issues when they arise., • Work with technical experts to gain complete knowledge of processing/manufacturing equipment operation, cleaning and maintenance., • Communicate technical and analytical data using reports, charts, graphs, etc. as required., • Prioritize assignments and independently manage time to satisfy business needs., • Participate in work teams to generate the most cost-effective solutions within each manufacturing department., • Demonstrate an understanding of productivity, quality and safety. Generate corrective action requests and document change requests when necessary., • Complete and manage production generated paperwork., • Set up analytical/testing equipment and perform required daily calibrations., • Prepare standard solutions and reagents as required., • Complete all chemical titration testing as required within the sanitation program., • Utilize proper chemical handling procedures., • Maintain the manufacturing plant in a safe and organized condition at all times., • Always work in a safe manner resulting in no work-related injuries., • Maintain equipment and area cleanliness to ensure compliance with all GMP standards., • Assist quality, sanitation, warehouse and maintenance personnel as required., • Ensure compliance with all policies and procedures within the facility. Requirements: POSITION REQUIREMENTS • High school diploma, technical degree, associate’s degree or equivalent manufacturing experience in food manufacturing, chemical processing, pharmaceutical manufacturing, or other manufacturing field is preferred. This position requires a person with strong knowledge and experience in manufacturing equipment, regulatory compliance, food safety, quality manufacturing and processing standards as applied to the dairy/food manufacturing industry., • Excellent verbal and written communication skills., • Proficiency with Microsoft Word, PowerPoint, and Excel., • Proficiency in word processing and spreadsheet software applications., • Familiarity with Windows based programs., • Ability to perform basic laboratory skills in a safe manner., • Familiarity with basic processing equipment and calibration requirements., • Ability to understand technical records and communicate technical data., • Ability to work independently or within a group with minimal supervision., • Ability to detect color changes in chemical testing procedures., • Ability to lift up to 50 pounds., • Ability to work 12-hour shifts or other work schedules as determined by business needs, including overtime as required., • Ability to be in a standing position for extended periods of time., • Must be certified on the training program for this position within six months of start date., • Candidate should be familiar with operating standard manufacturing equipment, • Prior experience with advanced manufacturing processes is ideal but not mandatory. Equipment Used: Personal protective equipment including, but not limited to safety glasses, steel-toed shoes, personal uniforms, and hearing protection. Common processing equipment, including but not limited to pumps, valves, metering systems, homogenizers, separators, heat exchangers, filling equipment, scales, PLC control panels, processing/standardizing equipment, chemical dispensing, material handling equipment and any other processing related equipment. In addition, personal computers with associated software and common office equipment are used. General: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Communication skills: Must have excellent communication skills to execute training activities and communicate technical aspects to all employees. Leaders must relate well to regulators, compliance officers and the business community leaders. Good oral and written communication skills are essential as is excellent computer skills, especially in the areas of spreadsheets, word processing and internet research. Judgment and decision-making skills: Must exercise sound judgment and decision-making skills to advise employees properly and understand both the financial and safety related impact of the decisions made. Hours: This is a full-time, hourly position. The process equipment operators may need to put in additional hours to accomplish the mission when necessary. Some domestic travel may be required.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: * Authorize assembly process completion and support the build team with in-process inspections during the build process. * Validate visually and dimensionally that the product meets requirements compared to engineering drawings. * Inspect for defects in surfaces, fasteners, sealant, paint, and testing. * Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions. * Develop deviation reports and represent quality at the Material Review Board. * Be responsible for non-conforming material processes and procedures. * Deliver high level of workmanship in inspection processes for structural assembly and system installations. * Experienced in quality management systems and become a subject matter expert in the company management system. * Participate in tooling validation and application to meet product requirements in quality and efficiencies. * Develop standardization for working procedures for high repeatability. Compensation Range: $28.08-$33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. * High school degree or equivalent required. * Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. * 5+ years of qualified inspection experience in defense manufacturing. * Experience with ISO/AS9100 and highly standardized processes. * Strong communication skills and ability to work as a team. * Proficiency interpreting engineering drawings and specifications in written and digital format required. * Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. * Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. * Excellent communication and team working skills. Physical Requirements: * Must be self-mobile and able to stand for extended periods. * Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. * Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. * Ability to lift up to fifty (50) pounds. * Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. * Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description JOB SUMMARY: Operate Clean Room blow/injection molding and auxiliary equipment including packaging quality parts using visual aids, job instructions, and work instructions. Essential Job Duties and Responsibilities: (Additional duties may be assigned) 20% Clean Room Functions • Manufacturing Personnel Practices (Hygiene Policy) • Understanding CleanRoom Product & Supplies • Set up Workstations for upcoming job • Perform Audits during Production -Quality -Labeling -Packaging • Perform Line Clears when job completes • Daily Housekeeping Duties -Wiping down workstation, Tables or any bins using 70/30 Alcohol ONLY • Technical duties including but not limited to: -Stopping & Starting Machine -Answering Alarms -Stop, Start and Answer alarms on Automation equip. 60% Operate auxiliary equipment, inspect and pack parts including, but not limited to: • Monitoring production machines and visually inspect product; • Visually inspecting and measuring parts; • Operate auxiliary equipment such as leak checks, auto case sensors, cameras, etc. • Perform operating tasks according to the 5S & JI training program 20% Package parts including, but not limited to: • Make boxes for all machines, as needed, and ensure that boxes are made for the beginning of the next shift; • Prepare labels for boxes and Pallets; • Wrap / Band skids as needed; • Properly labeling and loading skids for shipping per work instructions. • Perform packaging tasks according to the 5S & JI training program Requirements Minimum Qualification Standards: • A High school diploma or a GED is required. • Previous work experience directly related to the position is not a requirement but is highly desirable. Knowledge, Skills, and Abilities: • Contribute to the overall success of the company by performing all assigned duties in a professional, timely, and accurate manner. • Promote the Quality Improvement Process. • Understand customer part requirements and usage. • Must be able to keep up pace with machines. • Must be able to recognize machine malfunctions and get assistance. • Must be able to fill out proper forms as needed. (Accurate and legible) Equipment, Machines, and Software Used: Ability to use auxiliary equipment. Ability to use hand truck, wrapper, automatic loading systems, Bander, etc. Ability to use general office equipment, and have a good understanding of IQMS Benefits Standard Health, Dental, Vision Benefits. Generous PTO. 401K Match.

Job Description Job Summary: Continue to provide operational, technical and job set up tasks for blow molding operation through both “hands on” and “instructional” training from the Process Engineers and Lead Technicians. Able to use training to complete job functions in a timely manner with limited assistance. Essential Job Duties and Responsibilities: (Additional duties may be assigned) Perform Daily duties according to the Daily Checklists. • Full product changeovers according to the changeover outline., • Basic understanding of mechanical troubleshooting., • Basic understanding of hydraulic / electrical controls and components., • Setup and troubleshoot downstream equipment., • Follow OSHA, ISO, and FDA requirements and standards., • Ensure a safe work environment., • Ability to use hand tools, overhead crane, forklift, and general office equipment., • Safety requirements for this position include but are not limited to eye protection when on the production floor and in the tool room., • High school diploma or GED required. Equivalent combinations of education and experience will be considered., • Experience with hand tools required. Paid Time Off – Includes vacation, holidays, personal and sick time. Weekly deductions based on coverage range from $110 - $210/week for a family plan. ($9.58/week for a family plan) ($3.84/week for a family plan) Flexible Spending Account (FSA) – This election offers pre-tax savings to reimburse qualified medical and child care expenses. 401K – Eligible to participate the 1st of the Quarter following 90 days of employment. CPI matches 50% on the first 6% you contribute to the plan. Profit Sharing- You will be an eligible participant in Currier Plastics Profit Sharing Plan. Based on the company’s performance and the plan’s criteria, you may receive monthly bonuses paid out quarterly. Long Term Disability – Currier Plastics pays for Long Term Disability coverage for all employees. Life Insurance – Currier Plastics pays for Life insurance for all eligible employees. Other Insurances - AFLAC offers a variety of additional insurance programs including Sickness, Disability, Cancer and Life for your consideration upon eligibility. The employee is responsible for 100% of the cost. The premiums are conveniently paid through payroll deduction and most can be made on a pre-tax basis. Employee Assistance Program – Free counseling services for a variety of topics available confidentially to employees and their immediate family. Tuition Reimbursement Program – Reimbursement of tuition for one course per semester on a sliding scale based on academic performance. Employee & Family Social FUNctions – CPI Family Night, Summer Picnics, Golf Tournament, Holiday Gifts and Celebrations for Employees and Families.

Job DescriptionDescription: POSITION SUMMARY Position requires a person with strong knowledge and experience in manufacturing equipment, maintenance, and repair of mechanical and electrical components of production equipment and systems. Perform all tasks in a safe manner to ensure achievement of performance, quality, service, and cost objectives. Comply with all standard operating procedures and requirements as directed by standard manufacturing policies established by the company. POSITION RESPONSIBILITIES • Responsible for maintenance and repair of mechanical and electrical components of production equipment and systems., • Ability to troubleshoot and repair mechanical, electrical, and PLC equipment., • Use of common maintenance hand tools and specialty tools to repair and maintain equipment., • Maintain ammonia refrigeration equipment to comply with all state and federal regulations., • Maintain plant lubrication program to properly lubricate and maintain all plant equipment within specified standards., • Maintain compressed air, steam, condensate, chemical transfer, water, glycol, chilled water, tower water, hot water, sanitary waste, natural gas, printing/coding, HVAC and other support systems throughout the manufacturing plant., • Maintain manufacturing equipment in a desirable manner to achieve target key performance indicators within each department., • Work closely with maintenance, laboratory, and training personnel to achieve manufacturing objectives., • Troubleshoot and perform basic maintenance related to all processing equipment, experience with high and low voltage electrical., • Maintain proper inventory levels of all manufacturing supplies; ordering parts and supplies to maintain equipment., • Perform minor plumbing, building repair and maintenance., • Work with technical experts to gain complete knowledge of processing/manufacturing equipment operation, cleaning, and maintenance., • Reading/interpreting equipment manuals, blueprints, and other sources of information to ensure proper operation and repair of equipment., • Prioritize assignments and independently manage time to satisfy business needs., • Ensure preventive maintenance program is performed in accordance with company standards., • Demonstrate an understanding of productivity, quality, and safety. Generate corrective action requests and document change requests when necessary., • Always maintain the manufacturing plant in a safe and organized condition., • Always work in a safe manner resulting in no work-related injuries., • Maintain equipment and area cleanliness to ensure compliance with all GMP standards., • Assist quality, sanitation, warehouse, and operations personnel as required., • High school diploma, or equivalent., • Technical degree, associate degree or equivalent in manufacturing, with maintenance of mechanical and electrical components, with a focus in food manufacturing, preferred., • Strong knowledge and experience in manufacturing equipment, regulatory compliance, food safety, quality manufacturing and processing standards as applied to the dairy/food manufacturing industry, preferred., • Ammonia refrigeration experience, preferred., • Excellent verbal and written communication skills., • Familiarity with Windows based programs., • Familiarity with basic processing equipment and calibration requirements., • Ability to understand technical records and communicate technical data., • Ability to work independently or within a group with minimal supervision., • Ability to lift up to 50 pounds., • Work the second shift, with the ability to work the overnight shifts as needed for coverage., • Working knowledge of GMP, FDA, SQF and other regulatory requirements helpful. Equipment Used: Personal protective equipment including, but not limited to safety glasses, steel-toed shoes, personal uniforms, and hearing protection. Common processing equipment, including but not limited to pumps, valves, metering systems, homogenizers, separators, heat exchangers, filling equipment, scales, PLC control panels, processing/standardizing equipment, HTST’s evaporators, RO’s, UF’s, dryers, conveying systems, chemical dispensing, material handling equipment and any other processing related equipment. In addition, personal computers with associated software and common office equipment are used. General: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Communication skills: Must have excellent communication skills to execute training activities and communicate technical aspects to all employees. Leaders must relate well to regulators, compliance officers and the business community leaders. Good oral and written communication skills are essential as is excellent computer skills, especially in the areas of spreadsheets, word processing and internet research. Judgment and decision-making skills: Must exercise sound judgment and decision-making skills to advise employees properly and understand both the financial and safety related impact of the decisions made. Hours: This is a full-time, hourly position. The schedule would be 12hr night shifts 6pm-6:30am with a rotating two week schedule of Mon/Tues/Fri/Sat and Sun/Wed/Thurs. The Industrial Maintenance Technicians may need to put in additional hours to accomplish the mission when necessary. Some domestic travel may be required.

Job Description At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. As the Regional Repair Shop Manager, you will play a critical role in driving business growth, ensuring repair quality, and delivering top-tier service to our customers. You will oversee both our Buffalo and Auburn repair facilities which provide field service and in-house repair or rebuilding of equipment and machinery. Salary Range: $75,000 – $125,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • EAP, • 401K Your core responsibilities will include: Developing Sales Strategies and Leading Account Management • Manage the end-to-end workflow of the shop, including repair, packing, delivery, and pick-up, to ensure efficiency and on-time performance. NECESSARY QUALIFICATIONS • Experience in wholesale motor/electrical business., • Strong leadership skills., • Excellent organizational skills., • Inventory management experience., • Ability to strategize and plan., • Proficiency with Microsoft Office., • Excellent verbal and written communication skills., • Demonstrated capability to manage high quality, efficient and cost-effective operations a must., • Associates degree from two-year college or university, one to two years' related experience and/or training; or equivalent, • Ability to travel between Auburn and Buffalo locations (overnights not required) PHYSICAL REQUIREMENTS • Ability to sit for prolonged periods of time., • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description CNC Programmer Location: Skaneateles, NY Pay Rate: $28/hr Experience Required: 3+ years CNC programming Summary The CNC Programmer is responsible for programming, setting up, and adjusting CNC machinery to produce precise, high-quality components. This role requires strong machining knowledge, blueprint reading, and proficiency with CAD tools to support accurate and efficient manufacturing. \Key Responsibilities • Program, set up, and operate CNC machines to meet production and engineering specifications., • Read and interpret blueprints, safety rules, operating instructions, and procedure manuals., • Use SolidWorks CAD to review drawings and support program creation., • Apply machining calculations to determine speed, feed, coolant flow, depth, and angle of cut., • Enter, edit, and retrieve commands within computerized machine control systems., • Follow company safety rules and maintain proper operational standards. Required Qualifications • High School Diploma or equivalent., • 3+ years of CNC programming experience., • Familiarity with SolidWorks CAD., • Strong ability to interpret technical documents and machining specifications.

Job Description JOB SUMMARY: Work with new and existing customers to develop new business and effectively manage existing business for the organization. Essential Job Duties and Responsibilities: Conduct regular and focused sales activity for the Company including, but not limited to: • Researching and investigating potential new accounts; building a customer profile to outline the prospect/customer, • Making sales calls to potential new accounts to develop new business opportunities and present quotes with primary focus on packaging segments, • Generate Request for Quotations (RFQ) for new opportunities, this includes providing details on user inputs that are critical to developing a technical quotation., • Develop new business accounts with packaging prospect., • Managing existing business and develop new opportunities with these accounts., • Reviews customer documentation; business plans, manufacturing agreements and contracts. Provide verbal and written reports on prospecting, call logs and new business pipeline using the Customer Relationship Management (CRM) tool and other written content like business case presentations for capital expenditures., • Responsible for hitting territory sales targets annually, new and existing business • Responsible in providing monthly and annual account sales forecast, • Responsible for customer satisfaction, in all aspects of business engagement, • Keeps management informed of changing market conditions within the region Supervisory Responsibilities: This position does not have any supervisory responsibilities. Requirements Minimum Qualification Standards: • Bachelor’s degree preferred, Business Management/Engineering a plus. • Minimum of 5 years of experience related to sales and business development with a history of success • Exposure to the injection and/or extrusion blow molding processes and engineering is preferred. • Strong entrepreneurial skills, self-starter, requires little supervision. • Possess and maintain a valid and clean driver’s license. • Able to successfully complete Currier Plastics Business Development Playbook training. Knowledge, Skills, and Abilities: • Contribute to the overall success of the company by performing all assigned duties in a professional, timely, and accurate manner. • Promote the Quality Improvement Process/Lean culture in customer facing decisions. • Maintain awareness of new trends, opportunities, and markets through self-education. • Complete required process steps and documentation within ISO 13485 quality system. Equipment, Machines, and Software Used: • Ability to operate general office equipment. Proficiency in MS Office tools like Outlook, Excel, Word and PowerPoint. CRM software Mental Requirements: Close mental and visual attention required to perform work dealing primarily with preparing and analyzing data and figures, performing accounting work, using computer terminal, AND/OR extensive reading. Physical Requirements: Light work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arms and/or leg controls requires exertion of forces greater than that for Sedentary Work and the employee sits most of the time, the job is rated for Light Work. Ability to sit, stand and walk for sustained periods of time. Acute speaking and listening is imperative for communication with the customer. Communication Skills: Ability to read, analyze and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from clients, regulatory agencies, or members of the public. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management of own organization or outside organizations. Math Skills: Ability to Ability to add, subtract, multiply and divide, use units of measure, fractions, and decimals, calculate interest, proportions, percentages. Ability to apply concepts of algebra and geometry and interpret bar graphs. Environmental Conditions: The employee is subject to both inside and outside environmental conditions: activities occur inside and outside. Safety, Protective Clothing and Gear Requirements: Safety requirements for this position include, but are not limited to, eye protection when on the production floor and in the tool and room hair nets and coats in production areas. Employees must follow any additional safety requirements as posted in specific job areas. Benefits Standard Health, Dental, Vision Benefits. Generous PTO. 401K Match.

Job Description We are seeking an experienced CNC Machinist to support machining operations in Skaneateles, NY for a 6-month contract assignment paying $30 per hour. This role requires strong CNC programming experience, the ability to read and interpret blueprints and technical documents, and a solid understanding of machining calculations involving speed, feed, coolant flow, and cutting angles. The ideal candidate has over 3 years of CNC programming background, familiarity with SolidWorks CAD, and the ability to set and adjust machine controls accurately while meeting production and quality standards. Job Description • Utilize CNC programming knowledge to set up, operate, and adjust machining equipment to meet production requirements., • Read and interpret blueprints, safety rules, operating instructions, and maintenance procedures to ensure accurate machining results., • Perform necessary calculations to regulate machining factors such as speed, feed, coolant flow, and cutting depth or angles., • Retrieve, input, and edit machine control data using computerized machine systems., • Ensure equipment is operated safely and maintained in proper working condition., • High School Diploma or equivalent required., • 3+ years of CNC programming experience or an equivalent combination of education and experience., • Familiarity with SolidWorks CAD required., • Ability to read and interpret technical documents, blueprints, and procedural manuals., • Strong understanding of algebra, geometry, and machining calculations., • Ability to perform precise machine setups and adjustments according to specifications. ightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is an equal opportunity employer and prohibits unlawful discrimination based on race, color, creed, gender, religion, marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sex, genetic information, sexual orientation, military and veteran status or any other consideration made unlawful by federal, state, or local laws. RightStone is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination by any employee of the Company, including supervisors, coworkers, independent contractors and other third parties. Company DescriptionRightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT! RightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success. Candidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business! Client Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!RightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you!\r\n\r\nRightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT!\r\n\r\nRightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success.\r\n\r\nCandidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business!\r\n\r\nClient Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!

Job Description At Birnie Bus Services we offer our Diesel Technicians: • Starting $23.00-$25.00 depending on experience, • Full Year, Team-based work environment, • Vacation, Holiday, and Benefit packages Come join our team! As a diesel mechanic, you will perform complex operations including engine, electrical, fuel, brake, and exhaust repairs on large commercial vehicles. Following OEM and other standards, you will perform thorough preventive maintenance inspections, along with roadside and emergency service repairs, among other duties. Read more to apply! Job Type: Full-Time Schedule: Monday-Friday Location:1925 State Route 31 Port Byron, NY 13410 Pay Range: $23-$25 depending on experience Responsibilities: · Perform thorough, accurate preventative maintenance inspections. · Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation. · With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed. · Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials. · Perform emergency roadside services as needed. · Inspection of equipment and diagnose mechanical defects. · Document repairs and parts on work orders completely and accurately · Maintain tools and workplaces so that conditions are neat and orderly. · Performs other duties as required. · Emergency conditions may require on call service calls, extended hours, or weekend work flexibility. · May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc. · Perform other duties as required. · Assist with maintaining cleanliness of assigned bus. · Occasionally attend field trips and special events to ensure passenger safety. Qualifications: · 1+ year(s) experience as diesel mechanic or mechanic · Accreditation from a school or certification program · Complete all training requirements STA is an Equal Opportunity (EEO) Employer and welcomes all qualified applications; Returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Company DescriptionWe believe that compassion is key – from what is under the hood of our vehicles, to who sits behind the wheel. Above all else, we are dedicated to fostering environments that support the 1.25 million students we transport each day and nurturing a company culture that creates a sense of family and empowerment with employees that are proud to come to work each day and help get children to school safely.We believe that compassion is key – from what is under the hood of our vehicles, to who sits behind the wheel. Above all else, we are dedicated to fostering environments that support the 1.25 million students we transport each day and nurturing a company culture that creates a sense of family and empowerment with employees that are proud to come to work each day and help get children to school safely.

Job Description This is a 12-hour position on the night shift! The schedule will be detailed during the interview process. JOB SUMMARY: Manage the assigned blow molding shifts in a way that meets and ultimately exceeds jointly established objectives. Essential Job Duties and Responsibilities: (Additional duties may be assigned) Actively manage the molding processes to verify compliance with customer demands and priorities including, but not limited to: • Communicating daily updates on equipment and production status;, • Advising appropriate personnel for correction of manufacturing issues through application of sound problem solving processes;, • Oversee corrective actions related to molding processes resulting from customer complaints or systemic molding problems. • Overseeing and review of production standards for assigned shifts, including following all levels of leader standard work defined., • Implement issued production scheduling, staffing, machine maintenance., • Attending all operations leadership team, and scheduling meetings while leading/attending one on one and shift meetings. Lead continuous improvement in order to meet or exceed improvement and V2 goals including, but not limited to: • Development of high caliber leadership by defining qualified backups and overseeing the performance development process for all direct reports;, • Development of a fully engaged, high energy, fully flexible workforce, with improved morale., • Monitoring, analysis, reporting and reacting to daily (and monthly) efficiency downtime and quality & other visual/written reports;, • Create a focus on visual metrics while continually evaluating those metrics for impact on the shift., • Leading and participating on continuous improvement teams. Supervisory Responsibilities: Direct supervision responsibilities over lead operators, technicians to include hiring and disciplinary action, promotion recommendations; planning and checking work, and providing training in methods. Indirectly involved in hiring and disciplining decisions regarding production employees. Requirements Minimum Qualification Standards: • Requires Associates degree preferred Management and 3 years experience in manufacturing environment., • Six years of successful experience in similar positions will be considered., • Thorough understanding of mold construction, plastics processing, materials, assembly, SPC, and computers is desirable. Knowledge, Skills, and Abilities:, • Contribute to the overall success of the company by performing all assigned duties in a professional, timely, and accurate manner., • Promote the Continuous Improvement Process (V2) using lean, GMP and advanced scientific molding technologies., • Available for 24 hr. assistance if needed. Equipment, Machines, and Software Used: Ability to understand & use molding and auxiliary machinery, general office equipment, and inspection equipment. Mental Requirements: Moderate mental and visual attention when working with & around office, manufacturing & auxiliary support equipment. Physical Requirements: Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Ability to climb, stoop, kneel, crouch, stand and walk. Ability to reach, pull, push and lift objects. Ability to use fingers, grasp, feel and perform repetitive motions. Ability to talk and hear. Communication Skills: Ability to read, analyze and interpret common scientific and technical journals, financial reports, visual metrics, SPC software & charts. Ability to respond to common inquiries and complaints & other personnel situations in a professional manner. Ability to schedule, develop itinerary, & lead/facilitate shift meetings. Ability to effectively present information to management. Math Skills: Ability to calculate figures and amounts such as interest, proportions, percentages, area circumference and volume. Ability to apply concepts of basic algebra and geometry. Environmental Conditions: The employee is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. The employee is subject to one or more of the following atmospheric conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mist. The employee is subject to oils: There is air and/or skin exposure to oils and other cutting fluids. Safety, Protective Clothing and Gear Requirements: Safety requirements for this position include but are not limited to eye protection and hearing protection when on the production floor and in the tool room. Employees must follow any additional safety requirements as posted in specific job areas. Benefits Standard Health, Dental, Vision Benefits. Generous PTO. 401K Match.

Job DescriptionCompany Description Monro, Inc. Monro, Inc. is one of the nation’s largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industry—Monro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we’re currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro – Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! – Your career is here. Job Description About the Role: The Store Manager position is a salaried role. The Store Manager provides daily leadership to all positions within the store to include General Service Technicians, Technicians, Guest Care Specialists, and Assistant Store Manager. Reporting to the District Manager, the Store Manager is responsible for providing the day-to-day leadership to the store and teammates, including selecting, coaching, and developing store teammates. This position supports Monro’s vision to be America’s leading auto and service tire service centers, trusted by our guests as the best place in their neighborhoods for quality automotive service and tires by promoting products and services to guests. Salary Range: Up to $75,000 per year - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Develop sales and technical teammates to produce a consistent 5-star Guest experience., • Ensure sales goals are achieved by assisting in the development and implementation of sales plans, thorough knowledge of services and products and the automotive industry., • Introduce tire and service products to guests to maximize sales and guest satisfaction and loyalty., • Support teammates in establishing and maintaining a productive sales environment by training and developing teammates on all shop operations and guest services., • Provide direction and oversight to other technicians and assist where needed with services/repairs., • Ensure the store is effectively staffed by managing the recruiting, hiring, training, scheduling, evaluating, performance management, and development of teammates., • Ensure expense control through the management of payroll, telephone usage, store maintenance and repairs, supplies, utilities, and other controllable expenses., • Responsible for inventory management to include pulling tires and parts, unloading and stocking inventory., • Audit courtesy inspections performed by teammates., • Ensure store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Schedule guest appointments and assign teammates according to their skill level for efficient and timely completion of vehicle services/repairs., • Achieve Monro’s sales goals by properly informing and recommending tire and service products and sales promotions., • Attend to all guest needs in areas of sales, service, complaints, and adjustments., • Build guest relationships to maximize customer satisfaction, loyalty, and retention., • Assist teammates in conveying repair and service needs to guests., • Understand and adhere to company policies and procedures, Governmental standards including environmental codes, and ASNI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Demonstrated leadership experience in a retail/sales environment., • Proven ability to manage, drive and deliver financial results while controlling costs., • Ability to influence and motivate a team to achieve set goals and objectives., • Ability to problem solve, manage inventory, merchandising, and customer service., • Communications skills to effectively communicate with teammates and guests., • Complete all Monro required training with the guidelines and timing provided., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives. Profile Summary: • Guest and team focused mindset with extensive experience in customer-facing, customer-centric environments, • Excellent verbal and written communication skills with the ability to convey technical issues and write routine reports., • Business mentality with the drive to exceed established goals., • Possess basic math skills to calculate figures and amounts such as discounts, interest, and percentages., • Proactive with demonstrated proficiency in multi-tasking within a fast-paced environment., • Ability to take initiative in identifying problems, collecting data, and establishing facts to produce practical decisions and solutions., • Ability to effectively mentor, coach and develop teammates., • Ability to problem solve and resolve customer complaints. Work Environment & Physical Requirements: This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt and dust. Store Managers must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental, • Employee Access Perks Monro conducts criminal background checks for those positions with security and/or financial responsibilities. All background checks are conducted in accordance with applicable federal, state and local law, including but not limited to the Fair Credit Reporting Act. No applicant will be automatically disqualified because of a criminal record. Rather, the Company will consider the nature of the crime(s), when it occurred, the applicant’s explanation, and the relationship to the position sought in making its determination. Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description JOB SUMMARY: Drive successful product launches, high level technical support for efficient day to day operations, and continuous improvement initiatives in a goal oriented / team building environment. Essential Job Duties and Responsibilities: (Additional duties may be assigned) Responsible for quoting of tooling and vendor management. Drive continuous improvement for standard work, 6S, part reordering, visual factory, TWI, continuous education, and other LEAN related initiatives to drive measurables in desirable directions. Manage technical support to drive high efficiencies, low CoQ, and other measurables in day to day operations. Ensure successful new product launches from start through first production runs. Requirements Minimum Qualification Standards: A Bachelor’s Degree in a related field along with five years’ experience as an engineer, project manager or senior level manager in the plastics industry is required. Work experience of 5-10 plus years in plastics (blow molding preferred), an engineering, project management or senior level manager position will be considered equivalent. High school diploma or GED is required.

Job Description At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. Our Buffalo and Auburn repair facilities provide field service and in-house repair or rebuilding of equipment and machinery. We are looking for you to join our upstate Pump and Motor Repair Team as an Outside Sales Account Manager. Territories: Auburn and Buffalo Salary Range: $50K – $95K (draw against commission structure) Competitive Benefits Package • Health insurance (medical, dental, vision), • EAP, • PTO program and paid holidays, • 401K with employer match, • Company provided life insurance (after 1 year of employment) Outside Sales (Pump and Motor Repair) Responsibilities: • Schedule outside appointments with existing customers to review requirements, nurture relationships, maximize sales opportunities, and uncover new opportunities., • Generate and develop new business to increase revenue, through prospecting activities, including cold calling., • Effectively liaison between the company and customers for all ongoing account management activities including quotations, pricing, delivery, technical support, and service., • Establish and maintain up to date knowledge on procedures, services, and tools by successfully completing all training activities as needed., • Determine customer requirements to recommend specific products, solutions, or services., • Target Account Planning and Execution., • Perform all administrative aspects of the position, including sales / opportunity reports and maintenance of customer accounts., • Prepare and execute effective sales presentations and demonstrations of services., • Annual sales forecast and execution., • Keep up to date with market trends and competitor activity., • Attend conferences and trade shows., • All other duties as assigned from time to time. Outside Sales (Pump and Motor Repair) Qualifications: • Experience in wholesale motor/electrical business., • At least 2 years of business-to-business sales experience., • Desire to grow business through outside sales appointments., • Strong negotiation and communication skills., • Effective time management, organization, and multi-tasking skills., • Commitment to quality., • Proficiency with Microsoft Office., • Capable of preserving confidential or sensitive information., • Valid and clean driver’s license to operate company vehicles., • Epicor Eclipse ERP preferred. Physical Requirements • Ability to travel extensively, including driving to client locations and attending off-site meetings., • The role involves a significant amount of walking, standing, and potentially carrying promotional materials or product samples., • Ability to utilize a computer keyboard, computer monitor, computer mouse, adding machine, laptop, and telephone for prolonged periods of time Learn more about our Pump and Motor Repair capabilities here: Power-Flo Technologies is a fast-growing family of companies that consist of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan, New England, and Upstate New York areas. Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionOur Auburn Pump and Motor Repair Shop is looking for a skilled Machinist to join the team. Primary Functions At the direction of the Shop Management the Machinist is to perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler., • Ability to machine housings, shafts, keyways, and sleeves., • Must be familiar with common industry tolerances and fits for motor repair., • Fabricate products to meet established quality standards and the requirements of our customers., • Establish and follow maintenance schedules for shop equipment., • Provide technical expertise as needed., • Maintain a neat and orderly work area at all times., • Organize and maintain personal and shop tools and equipment., • Willing and able to work OT as required. Machinist Necessary Qualifications • 5 years mechanical assembly and disassembly experience preferred., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required., • Valid and clean NYS driver's license to operate company vehicles as needed. Machinist Physical Requirements • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $20 - $30/hour. Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionSalary: $120-140K plus bonus FOC Acquisition has two plant locations, Sterling, MA and Elbridge, NY, both manufacturing custom fiber optic lighting and sensing components for medical and industrial industries. Specializing in partnering with OEMs to design and manufacture fiber optic solutions for complex mission critical cabling and subassembly applications, FOC Acquisition's highly skilled team works together to bring the best quality product to our customers, and exceed their expectations throughout the engineering and manufacturing process. We are looking for a Plant Manager at our Elbridge, NY location. The ideal candidate will have experience managing day-to-day manufacturing operations, knowledge of quality standards and lean principles and have an aptitude towards technical engineering. Job Summary As the Plant Manager at FOC Acquisitions Elbridge, NY site (Acrolite), you will play a critical role in overseeing our manufacturing operations and ensuring the highest standards of quality, safety and efficiency. You will lead a dedicated team and champion Kaizen principles to drive continuous improvement throughout the Organization. Primary Responsibilities Leadership and Team Management: Provide strong leadership and direction to a diverse team of engineering, production, and quality professionals. Foster a culture of Kaizen by championing Kaizen workshops and improvement initiatives. Develop operational and strategic initiatives to meet the Plants growth, EBITDA and Cash Conversion metrics as well as supporting the Innofiber Group initiatives and financial targets. Set clear expectations and performance objectives for the team and provide regular feedback. Provide support to FOC Acquisitions group sites as needed to support the groups initiatives. Production Management: Manage daily production schedules ensuring on-time delivery of high-quality fiber optic assemblies. Optimize production processes, eliminating waste to improve product GM. Implement lean manufacturing principles, with a particular emphasis on Kaizen, to drive continuous improvement. Ensure standard work is implemented and maintained throughout the organization. Quality Assurance & Safety and Compliance: Collaborate with and build the Quality Assurance team to maintain and enhance product quality. Implement quality control measures and ensure compliance with industry regulations and standards and maintain our ISO 9001 certification. Prioritize workplace safety and ensure all employees follow safety protocols. Engineering/New Product Introduction (NPI) Collaborate with the Engineering team to ensure NPI process is used to successfully validate new product introduction successfully. Ensure new product development projects are completed on time to support FOC Acquisitions YOY growth strategy. Cost & Cash Management: Collaborate with the Site Controller to achieve the annual budget objectives, identify and implement cost-saving opportunities. Implement cost-effective strategies while maintaining high product quality. Analyze variances and take necessary corrective actions. Supply Chain and Inventory Management: Collaborate with the supply chain to optimize inventory levels and ensure timely availability of materials. Monitor supplier performance and address any issues that may impact production. Kaizen and Continuous Improvement: Lead Kaizen workshops and initiatives to drive continuous improvement in processes, productivity, and quality. Train and mentor team members on Kaizen principles and encourage a culture of innovation. Reporting and Analytics: Work with the Controller and Accounting teams to prepare monthly reports on key performance indicators (KPIs) and financial results and provide insights for decision-making. Analyze production data to identify trends and opportunities for improvement. Secondary Responsibilities Develop subject matter expertise in Acrolites critical manufacturing processes and equipment. oFusing bundles and the fusing technology, o Draw tower equipment and programming and the requirements of drawing glass oMicro optic designs oMono-coil manufacturing. Lead knowledge-sharing initiatives and support the rollout of new technologies and processes across the group. Qualifications At least 5 years of proven experience in manufacturing operations, preferably in a managerial role. Strong knowledge of manufacturing processes, quality standards, and lean principles. Excellent leadership and team management skills. Proficiency in using relevant software and systems for production planning, inventory management, and reporting. Ability to implement and influence Kaizen principles to drive continuous improvement

Job Description Experience Required: 3+ years CNC programming Summary The CNC Programmer is responsible for programming, setting up, and adjusting CNC machinery to produce precise, high-quality components. This role requires strong machining knowledge, blueprint reading, and proficiency with CAD tools to support accurate and efficient manufacturing. Key Responsibilities • Program, set up, and operate CNC machines to meet production and engineering specifications., • Read and interpret blueprints, safety rules, operating instructions, and procedure manuals., • Use SolidWorks CAD to review drawings and support program creation., • Apply machining calculations to determine speed, feed, coolant flow, depth, and angle of cut., • Enter, edit, and retrieve commands within computerized machine control systems., • Follow company safety rules and maintain proper operational standards. Required Qualifications • High School Diploma or equivalent., • 3+ years of CNC programming experience., • Familiarity with SolidWorks CAD., • Strong ability to interpret technical documents and machining specifications., • Ability to apply basic algebra and geometry to machining calculations. Job Schedule 7am to 3:30pm (1/2 hour lunch at noon) - Monday through Friday - OT must be pre-approved Company Description \r\n \r\n

Job DescriptionPrivately owned architecture and engineering firm with 100 years in the Upstate New York, flexible schedules, potentially remote with a flexible salary range This Jobot Job is hosted by: Henry Chung Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $130,000 per year A bit about us: We leverage our expertise in architecture, engineering, and landscape architecture to help clients achieve their goals and overcome challenges. For over a century, our commitment to delivering comprehensive solutions has fostered lasting relationships with a diverse range of clients who trust us for our reliability, responsiveness, and high-quality work. We believe success comes from taking initiative, and our full-service approach ensures holistic solutions with outstanding results. Markets: Education, Government, Healthcare, Manufacturing, Commercial, Mixed Use, Retail, Office Space, Residential Why join us? • Hybrid schedules, remote options, • Above market healthcare, dental and vision benefits, • Above market salary ranges, • 401k match + employer guaranteed %, • Shareholder/Owner opportunities, • High retention rates, • Great work environment, • WORK LIFE BALANCE, we try to avoid overtime at all cost Job Details Key Responsibilities: Design building electrical systems, including power distribution, lighting, and fire alarm systems Assess existing site conditions and oversee field measurements Collaborate with clients to define project objectives, requirements, and available resources Conduct code analysis and ensure design compliance with applicable regulations Define and manage the engineering scope, budget, and schedule for each project Develop and coordinate Revit models using existing plans, documentation, and surveys Prepare engineering contract documents and calculations using CAD tools and electrical design software Select appropriate materials, equipment, and system components Review and verify technical accuracy and coordination of project documentation Develop project specifications and supporting documents Perform material quantity take-offs and assist in preparing cost estimates Stay current with electrical codes, standards, and industry best practices Review construction submittals for compliance with design intent Conduct periodic site visits during construction to monitor work and ensure adherence to construction documents Qualifications: 5–10 years of experience in electrical engineering design within the architecture/engineering industry Bachelor’s degree in Electrical Engineering New York State Professional Engineer (PE) license preferred; EIT certification required with active participation in a licensure development program Proficiency in Revit and AutoCAD for electrical design is required Strong written and verbal communication skills Solid understanding of the International Building Code Project management and/or team leadership experience is a plus Applicants must be U.S. citizens and may be subject to government security clearance requirements for access to classified information Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionDescription: Position Title: Controls Engineer Reports To: Technical Process Manager FLSA Status: Exempt Job Grade: 11 Pay Range: $114,000-$163,000 Local Candidates Preferred. Limited relocation assistance available Previous Experience in Food Manufacturing required Sponsorship is not available Position Overview: We are seeking a skilled Controls Engineer with extensive experience in PLC and HMI software within the dairy ingredients manufacturing industry. This role involves partnering closely with Operations and Design Engineering to enhance and develop Aseptic and Extended Shelf Life (ESL) processes. The Controls Engineer will play a critical role in ensuring product quality, food safety, and adherence to production specifications. Job Responsibilities: • Facility Startup Support: Lead the startup and commissioning of the new Aseptic ESL facility for Cayuga Milk Ingredients., • Automation Design & Installation: Design and implement plant-wide automation systems, including PLCs and HMIs., • System Monitoring & Maintenance: Oversee automated system performance, conduct regular maintenance, and troubleshoot issues to minimize downtime., • Documentation Management: Record all modifications to equipment and systems, ensuring accurate and comprehensive documentation., • Production Support: Respond to production issues promptly and provide technical support to resolve operational problems., • MES/BMS Coordination: Assist with Manufacturing Execution System (MES) and Building Management System (BMS) activities and coordination., • SOP Development: Aid in creating and updating Standard Operating Procedures (SOPs) for department processes., • Automation Solutions Implementation: Introduce automation solutions to optimize operations and minimize manual intervention., • Cross-Department Collaboration: Work closely with production, maintenance, supply chain, and accounting teams to integrate automation systems., • Technical Documentation: Develop design specifications, user manuals, and troubleshooting guides for automated solutions., • Compliance & Safety: Adhere to all environmental, GMP, HAACP, and OSHA regulations, ensuring a safe working environment and maintaining PPE standards., • Technical Competency: Ensure processing equipment functions per SOPs and verify operational accuracy., • Communication & Relationship Building: Communicate effectively, establishing strong working relationships across departments and providing clear, detailed reports to senior management., • Independence & Task Management: Execute assigned projects independently and manage multiple tasks effectively., • Availability: Occasionally work off-shift hours, including nights and weekends, to support 24/7 facility operations. Essential Knowledge/Skills: Technical Skills: • PLC programming (Allen-Bradley, Siemens) with the ability to write and troubleshoot code., • HMI design experience (AVEVA, FactoryTalk View) and familiarity with process databases (Historian)., • Proficiency in industrial networks (Ethernet/IP, DeviceNet, ControlNet)., • Ability to read and modify Process & Instrumentation Drawings (P&IDs)., • PID loop tuning and VFD setup experience (Allen-Bradley PowerFlex, Danfoss, Eaton)., • Expertise in digital and analog measurements (temperature, pressure, flow, speed, weight) and experience with discrete sensors. Organizational & Communication Skills: Strong organizational, teamwork, and communication abilities, with proficiency in Microsoft Office, AutoCAD, and reporting. Availability: General 7am-4pm, Monday-Friday. Willingness to work flexible shifts as needed, including holidays, nights, and weekends. Education/Experience: Bachelor’s degree in electrical engineering, Mechanical Engineering, or Computer Science. Minimum 5 years as a Programmer/Controls Engineer in a manufacturing setting, preferably dairy or food production. Environmental Considerations: · Must be able to work in environments with varying temperatures. · Potential exposure to ingredients used in food manufacturing, including allergens. · May encounter chemicals commonly used in food processing and distribution facilities. Physical Requirements: · Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. · Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. · Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. · Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. · Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. · Visual acuity sufficient to perform job duties accurately. · Capable of assessing weights, judging distances, and working at various heights. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Requirements:

Job DescriptionPrivately owned architecture and engineering firm with 100 years in the Upstate New York, flexible schedules, potentially remote with a flexible salary range This Jobot Job is hosted by: Henry Chung Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $130,000 per year A bit about us: We leverage our expertise in architecture, engineering, and landscape architecture to help clients achieve their goals and overcome challenges. For over a century, our commitment to delivering comprehensive solutions has fostered lasting relationships with a diverse range of clients who trust us for our reliability, responsiveness, and high-quality work. We believe success comes from taking initiative, and our full-service approach ensures holistic solutions with outstanding results. Markets: Education, Government, Healthcare, Manufacturing, Commercial, Mixed Use, Retail, Office Space, Residential Why join us? • Hybrid schedules, remote options, • Above market healthcare, dental and vision benefits, • Above market salary ranges, • 401k match + employer guaranteed %, • Shareholder/Owner opportunities, • High retention rates, • Great work environment, • WORK LIFE BALANCE, we try to avoid overtime at all cost Job Details Key Responsibilities: Design and develop comprehensive mechanical HVAC systems for building projects Assess existing site conditions and oversee project field measurements Collaborate with clients to define project goals, resources, and requirements Perform code analysis to ensure design compliance with applicable regulations Define and manage engineering scope, budget, and project schedule Create and coordinate Revit models using existing plans, surveys, and documentation in collaboration with project team members Prepare engineering contract documents and calculations using CADD tools and HVAC design software Specify appropriate materials, equipment, and system components Review and perform quality checks on technical documents for accuracy and coordination Develop project specifications and supporting documentation Conduct material quantity take-offs and assist in preparing cost estimates Stay current with mechanical codes, standards, and best practices Review and respond to construction submittals during the construction phase Conduct periodic site visits to observe construction progress and ensure adherence to design documents Qualifications: Minimum of 7 years of experience in the architecture/engineering industry, with a focus on mechanical (HVAC) design Bachelor’s degree in Mechanical Engineering or a comparable combination of education and experience Licensed Professional Engineer (PE) in the State of New York (required) Proficient in Revit and AutoCAD for developing mechanical HVAC systems Strong working knowledge of the International Building Code Experience in project management and/or team leadership is preferred U.S. citizenship required; applicants must be able to pass security background checks in accordance with client requirements Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionDescription: Position Title: Food Scientist- Product Technical Services Reports To: Sr. Director Quality and R&D FLSA Status: Exempt Job Grade: 9 Pay Range: $94,000-$135,000 Job Description: Food Scientist- Product Technical Services contributes to product development efforts, by engaging in technical services, and support for our farms, customers, and internal teams specifically R&D, Quality, Operations and Sales. The ideal candidate has a strong foundation in food science, a passion for dairy product development, and the ability to interact with cross-functional teams to bring new food innovations to life. Key Responsibilities: Product Innovation & Development: • Support new product innovation for dairy products, ingredients and beverages., • Design and conduct experiments, sensory studies, and shelf-life testing to optimize product performance., • Oversee ingredient applications and functionality, ensuring formulation stability and quality., • Spearhead new ingredient development and identify emerging opportunities for innovation., • Drive process improvements and collaborate with Operations on scaling up new products from lab to production., • Manage pilot trials and assist with start-up operations to ensure successful product launches., • Provide technical support to customers, including ingredient advisement, regulatory documentation, and sample management., • Oversee product and technical documentation, including product specifications, certifications (Kosher, Halal, etc.), and regulatory statements., • Manage the product specification program, ensuring internal and customer specifications are properly reviewed and approved., • Support Sales & Marketing by developing technical service bulletins and marketing materials to communicate product attributes effectively., • Work with multidisciplinary teams to drive innovation and technical excellence., • Work cross-functionally with Farms, Sales, Marketing, Quality, Operations, and Research & Development to align business goals with product development initiatives., • Stay informed on industry trends, emerging technologies, scientific advancements, and regulatory developments to maintain a competitive edge., • Expertise in food product formulation, industrial processes, ingredient functionality, and product-process interactions., • Strong understanding of dairy processing, including thermal processing., • Ability to work cross-functionally to solve specification/quality issues and drive product innovation., • Exceptional technical documentation skills and knowledge of quality systems., • Minimum B.S. in Food Science, Nutrition, Biological Sciences, Food Engineering, or a related field (M.S. or Ph.D. preferred)., • Must be able to work in environments with varying temperatures (e.g., lab, production)., • Exposure to food ingredients, including allergens., • May encounter food processing chemicals in research and production facilities., • Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter., • Must wear required personal protective equipment (PPE) as necessary to safely perform job duties., • Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks., • Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed., • Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodation., • Visual acuity is sufficient to perform job duties accurately. Monday-Friday 8-hour shifts to support 24/7 operation. Travel to conferences, trainings or customer visits may be necessary. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Requirements:

Job DescriptionCompany Description About O-I Remember the last time you opened a bottle of champagne? A cold beer after a hard day’s work or a bottle of sparkling mineral water to quench your thirst? Well, it was probably made by us. We are O-I and we love that we make more glass containers than anyone in the world. O-I has more than a century of experience crafting pure, sustainable, brand-building glass packaging for many of the world’s best-known food and beverage brands. We are proud to provide high quality glass packaging for beer, wine, spirits, food, non-alcoholic beverages, cosmetics and pharmaceuticals. Why do you want to apply? Our Auburn facility is located in the beautiful Finger Lakes region of New York. If you thrive in a busy environment, and are looking for a great place to work with highly engaged employees, then our plant in Auburn is the place for you. Job Description The Mold Shop Maintainer performs machine tool work, welding, brazing or bench work required in making repairs and alterations to molds, blanks, bottom plates or finish equipment. The Mold Shop Maintainer will: • Repair parts including sanding, welding, grinding, cutting and polishing as needed., • Use multiple air tools, hand tools, spray welders, CNC, lathes and torches, • Inspect and measure parts after work is completed, • Welding experience, • Experience reading blueprints, • CNC programming skills, • Experience using specialized measuring devices such as: micrometers, depth micrometers, vernier calipers, etc.Qualifications, • HS Diploma or equivalent, • 2 year technical degree in tool and die making, machine technology or the like OR equivalent years of direct work experience, • Previous experience working in a tool and die shop, • Must be able to work a 12 hour shift, • Must have experience and basic knowledge of computers and be able to learn programs necessary to carry out job functions., • Must be authorized to work in the U.S. on a full-time basis Additional Information What we offer at O-I: Hourly Wage: $38.51 O-I offers a very generous benefit package – some of the highlights are: • Vacation time and paid holidays, • Medical, dental, prescription and vision care coverage, • Pre-tax accounts, • Well-being program which includes opportunity to earn employer contributions, • Life and AD&D Insurance, • Disability Insurance, • 401(k) retirement saving plans with employer contributions, • Financial advisors to assist with retirement planning and financial wellness O-I is an Equal Opportunity and Affirmative Action Employer committed to building a diverse, equitable and inclusive culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other protected category. Qualified individuals with disabilities or disabled veterans who are unable or limited in their ability to apply on this site may request reasonable accommodations by emailing .

Job DescriptionDescription: Job Description Position Title: Quality Lab Technician-Consumer Products Reports To: Quality Team Leader FLSA Status: Hourly, non-exempt Job Grade: 2 Pay Range: $21.00-$31.94 per hour Shift: 12-hour shifts Days: (6:00 AM - 6:30 PM) or Nights (6:00 PM - 6:30 AM) Job Summary: Quality Lab Technician is a detail-oriented role within our aseptic dairy manufacturing facility. This role is responsible for conducting laboratory testing, data collection, and analysis on raw materials, ingredients, and finished products to ensure compliance with New York State Ag & Markets, FDA, USDA, and GMP regulations. The technician will also support remote quality assurance (QA) activities at Raw Milk Intake and contribute to special projects as needed. All tasks must be performed safely and in accordance with standard operating procedures (SOPs) and the Pasteurized Milk Ordinance (PMO). Key Responsibilities: • Prepare, collect, and analyze in-process and finished product samples, ensuring state certification for sampling is maintained., • Perform analytical testing using instrumental and wet chemistry procedures., • Verify quality and package integrity of outbound finished goods., • Accurately enter and report data using established reporting procedures and documentation platforms., • Support operations and logistics as part of the QA function., • Complete traceability and tracking documentation, including reports and exception logs., • Maintain cleanliness and calibration of laboratory instruments and equipment., • Conduct microbiological analysis on finished products, raw ingredients, ATP swabs, and environmental samples., • Collect, store, and maintain microbiological and shelf-life samples., • Inspect production lines to ensure adherence to quality and packaging standards., • Generate and manage quality control (QC) documentation and reports., • Investigate historical data and provide analytical insights as needed., • Collaborate with engineering, production, and sanitation teams to troubleshoot quality issues., • Effectively communicate technical and analytical data using reports, charts, and graphs., • Prioritize assignments and independently manage time to meet business needs., • Initiate and document corrective actions when quality deviations occur., • Place raw materials and finished products on hold as necessary and manage related exception reporting., • Oversee sorting and disposition of held product as needed., • Monitor and support quality checks performed by production personnel., • Set up analytical equipment and perform daily calibrations., • Prepare standard solutions and reagents following safety protocols., • Ensure compliance with chemical handling and laboratory safety procedures., • Maintain laboratory and remote work areas in a clean and organized condition following GMP standards., • Assist processing and production personnel as needed., • Ensure compliance with company policies, SOPs, and regulatory requirements. Requirements: Qualifications & Requirements: • High School Diploma or equivalent required; Associate degree or higher in Food Technology, Dairy Science, Chemistry, Biology, Microbiology, or Engineering preferred., • Strong knowledge and experience in lab testing programs, regulatory compliance, food safety, labeling requirements, and dairy processing standards., • Excellent verbal and written communication skills., • Proficiency with Microsoft Word, Excel, PowerPoint, and Windows-based software., • Familiarity with basic laboratory equipment and techniques., • Ability to analyze technical records and communicate findings clearly., • Capable of working independently and within a team with minimal supervision., • Ability to detect color changes in chemical testing and perform sensory evaluations of dairy products (must not have dairy allergies)., • Physical capability to lift up to 50 lbs and work 12-hour shifts or other schedules as business needs require, including overtime., • Certification on the training plan for this position within six months of hire., • Experience with standard lab equipment (e.g., pH meters, balances, spectrophotometers) preferred., • Knowledge of advanced analytical techniques (e.g., GC, HPLC) is a plus., • Familiarity with GMP, FDA, SQF, and other regulatory requirements is beneficial., • Majority of work is performed in laboratory and production environments, requiring extended periods of standing., • Personal Protective Equipment (PPE): Safety glasses, steel-toed shoes, hearing protection., • Laboratory Equipment: Electronic balances, colorimeters, torque testers, autoclaves, fume hoods, pH meters, titrators, spectrophotometers, distillation equipment, density meters, turbidimeters, refractometers, water baths, calcium meters, stirrers, centrifuges, ovens, vacuum pumps, timers, micro colony counters, BacT/Alert equipment, ATP swabbing tools, and incubators.

Job DescriptionDescription: Position Overview: Controls Technician will support the Plant Engineer with maintaining and troubleshooting the operations of a highly automated 24/7 manufacturing facility. Automated systems include food processing, refrigeration, filling, packaging, boiler, air generation and wastewater systems. This position will report directly to the Plant Engineer with support to the Maintenance Manager. Job Responsibilities: • Ability to read and understand electrical wiring diagrams., • Use Electrical AutoCAD for design purposes., • Responsible for the commissioning, diagnosis, calibration, maintenance, and repair of environmental-control systems and processes, utilizing knowledge of electronics, direct digital control (DDC), airflow, hydronics, refrigeration theory, pH sensors, flow meters, electrical meters and system control techniques., • Works with the Controls Engineer, Maintenance Personnel and plant personnel to keep all control systems, mechanical and electromechanical field devices operating according to the basis of design., • Troubleshoot electrical controls related process issues, • Must be willing to work in all areas when needed, • Maintain safety standards of equipment and work area and perform all duties in a safe manner in accordance with the safety policies, • Able to work extended or flexible hours/shifts as required, • Electrical drawings, procedures, maintenance logs, • Reviews and updates all equipment records for history of preventive/predictive maintenance and service activities to ensure adequate maintenance schedule is in place, • Reports on status of assigned equipment maintenance and repair activities to supervisor, • Operate, maintain, and trend the Building Automation Systems (BAS) for the entire site, • Performs preventive maintenance, component replacement and corrections as needed, • Participates in structured group or team activities related to line/area performance improvement autonomous maintenance, housekeeping, problem solving, • Shares knowledge and develops maintenance skills in operator technicians, • Evaluate and provide input for assembly, tooling, and equipment prints for existing and new program changes, • Instrumentation troubleshooting and diagnosis, set up, and some calibration support and training for electricians including ownership of calibration methods, • Receives general supervision and exercises some discretion as to work details, • Responsible for completing projects tasks within time and budget constraints, • Work is reviewed for overall accuracy, completeness and soundness of technical judgmentRequirements: Essential Knowledge/Skills: • Drive change with a positive attitude., • Learns and interacts positively with the environment, • Willing to act in a changing environment, • PLC control systems, programming, integration, installation, upgrade and troubleshooting of one or more of the following Rockwell, Siemens, ABB or others., • Initializing, modification, upgrade and troubleshooting of VFD including Rockwell, Parker, Lenze, Yokogawa, Reliance, Emerson, ABB, • Exercise technical, mechanical and control system aptitude / skills to accurately identify root causes for machine failures or breakdowns and the repair accordingly, • Instrumentations and controls debugging and troubleshooting Education/Experience: • Associates degree in controls or electrical engineering technologies or equivalent experience., • Minimum 3+ years working in manufacturing; Minimum 2+ years as a control’s technician (or equivalent experience)., • Must be competent with CAD systems, Supervisory control systems, Ladder Logic and other programs that are specific to work environment Environmental Considerations: • Must be able to work in environments with varying temperatures., • Potential exposure to ingredients used in food manufacturing, including allergens., • May encounter chemicals commonly used in food processing and distribution facilities. Physical Requirements: • Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter., • Must wear required personal protective equipment (PPE) as necessary to safely perform job duties., • Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks., • Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed., • Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations., • Visual acuity sufficient to perform job duties accurately., • Capable of assessing weights, judging distances, and working at various heights. Work Schedule: Shift work is support of production with occasional overtime to trouble shoot or perform preventative maintenance. 12 hour shift with rotating weekends; 6am-6pm or 6pm-6am. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements.

Job DescriptionDescription: Position Title: QA Lab Specialist Reports To: QA Team Leader FLSA Status: Non-exempt Job Grade: 4 Pay Range: $27.50-$38.75 Position Overview: The QA Specialist plays a key role in supporting daily laboratory operations, ensuring the accuracy of testing, and upholding regulatory and customer quality requirements. This role performs advanced analytical and microbiological testing, supports Certified Laboratory functions, assists with quality investigations, and contributes to the development of SOPs, SSOPs, and quality programs. The QA Specialist operates with a high degree of technical independence, acting as a resource for QA Technicians and cross-functional teams while supporting the QA Team Leader with documentation, quality programs, instrument troubleshooting, and data-driven decision making. This position does not serve as a full supervisor but supports training and peer-level guidance. Key Responsibilities Laboratory & Quality Testing • Prepare, process, and analyze in-process, raw material, finished product, and environmental samples., • Perform advanced analytical testing using instrumental and wet chemistry methods., • Conduct microbiological plating, incubation management, environmental testing, and shelf-life studies., • Perform daily setup, calibration, verification checks, and basic troubleshooting for laboratory instrumentation., • Prepare and standardize reagents and solutions in accordance with laboratory procedures., • Maintain laboratory organization, GMP compliance, and safety standards., • Support execution and documentation of Certified Laboratory testing in compliance with NYS Ag & Markets and Milk Market Association requirements., • Conduct microbiological plating (E. coli, RAC, AC), pipette accuracy testing, and incubation procedures (PI, LPC)., • Operate and calibrate specialized instrumentation such as:, • Delta Lactoscope, • Delta Somascope, • Bentley IBCm, • Perform thermometer calibrations, verification checks, Cornell sample reviews, and FMMO standard compliance activities., • Assist with monthly producer testing reports, recordkeeping, and supply management., • Assist with Hold/Release Program activities, including record verification and communication with production., • Participate in investigations, corrective actions, and quality alerts., • Support HACCP, SQF, Appendix N, and other quality systems through verification activities and documentation., • Assist in compiling data for quality KPIs, trend charts, and management reports., • Assist in creating, revising, and maintaining QA and laboratory SOPs, SSOPs, forms, and training documents., • Provide peer training to QA Technicians on lab procedures, equipment operation, and QA requirements., • Collaborate with operations, engineering, sanitation, and maintenance to troubleshoot quality issues and implement improvements., • Support customer documentation, export requirements, or technical data requests. Education • Associate’s or Bachelor’s degree in Dairy Science, Food Science, Chemistry, Biology, Microbiology, or related field strongly preferred., • 2+ years of quality assurance or laboratory experience in dairy or food manufacturing required., • Proficiency in wet chemistry, microbiological techniques, and instrument operation., • Knowledge of GMP, FDA, USDA, SQF, and NYS Certified Laboratory requirements., • Strong data management and computer skills (Excel, Word, Outlook)., • Strong attention to detail, organization, and communication skills., • Ability to interpret technical data and follow detailed procedures accurately., • Ability to work independently and collaboratively in a fast-paced environment., • Ability to lift up to 50 pounds., • Must be able to obtain and maintain NYS Certified Laboratory Technician status within six months of hire. · Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. · Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. · Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. · Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. · Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. · Visual acuity sufficient to perform job duties accurately. · Capable of assessing weights, judging distances, and working at various heights. Work Schedule: 3:30 PM – 12:00 AM. This is shift is to support an 24/7 operation and is subject to change to meet the needs of the position. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Disclaimer: For Recruiter’s and Staffing Agencies At Cayuga Milk, our Human Resources Team leads most of our hiring efforts and takes pride in connecting directly with talented individuals who share our values and passion for what we do. Most of our roles are filled with applications submitted via our careers site or through direct outreach from our team. While we occasionally partner with external recruitment agencies, we do so only with those on our existing, pre-approved vendor list. Currently, we are not adding new agencies to that list. If an unsolicited resume or candidate submission is received from an agency or recruiter not authorized by our Human Resources Team, it will be treated as a direct application. Cayuga Milk will not be responsible for any placement or referral fees related to these submissions. Requirements:

Job Description Akkodis is seeking Banner Support Specialist a for a direct job with a client in Auburn, NY. Must hold a Associates degree in Computer Science or related field to be considered. Responsible for developing, implementing, and maintaining the company’s Banner enterprise system and other related systems. This position coordinates system configuration and maintenance in collaboration with the rest of the Banner team and functional areas and serves as the first line of contact for functional area troubleshooting. Rate Range: $50/k. to $64/k. The rate may be negotiable based on experience, education, geographic location, and other factors. Banner Support Specialist job responsibilities include: · Manage Banner database, including user creation, role management, and security management. · Manage third-party applications that are tied to or integrated with Banner/oracle database. · Coordinate installs and patch updates, as well as custom object installs for third party integrations with Banner. · Act as a single point of contact through which all Banner-related technical problems are routed and provide technical assistance to users, where appropriate. · Monitor Ellucian updates for functional area changes and corrections and patches. · Serve as liaison to Banner-related vendor support on difficult technical issues. · Create custom applications and processes to support functional areas and general functionality of Banner. · Create user-focused and IT-focused documentation and training for specific custom applications and processes. · Works closely with Webmaster to create and maintain Banner functionality that supports web applications and website. Desired Qualifications: · Associates degree in Computer Science or related field is required. · Minimum Three years related experience. · Experience with Ellucian Banner products. · Experience in Windows and Linux or UNIX operating systems. · Application development experience using SQL, PL/SQL, C, Perl, HTML, Java, or similar programming languages. · Understanding of the security issues involved in maintaining and safeguarding institutional data. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or . Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: * Paid TIme Off * Medical/ Dental and Vision Insurance * 401K To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit " target="_blank">. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance Pay Details: $50.00 to $64.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Retail offers flexible, collaborative careers in logistics, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service - to name just a few. Retail companies are also some of the most exciting brands in the country - and they're driving the industry's i

Communicate with Service Manager if/when a follow-up call is required. Refrigeration Service Technicians diagnose and repair technical problems with milk cooling systems and perform general maintenance and service tasks on customer farms. Starting in 1983, Fisher & Thompson has grown into the leadin

Job Description We are seeking an experienced and detail-oriented Project Manager to oversee and coordinate all aspects of projects from concept through production launch. This role is responsible for managing timelines, budgets, tooling, process development, and cross-functional collaboration to ensure projects are delivered on time, within scope, and to the highest quality standards. Key Responsibilities: • Lead and manage projects from initiation through completion, ensuring alignment with customer requirements and company objectives., • Serve as the primary point of contact for customers, suppliers, and internal teams regarding project scope, progress, and deliverables., • Develop and maintain detailed project plans, timelines, and budgets; monitor progress and adjust resources as needed., • Oversee tooling build, validation, and qualification activities, • Coordinate with engineering, quality, operations, and supply chain teams to ensure smooth project execution and production readiness., • Monitor and mitigate project risks, implementing corrective actions where necessary., • Track key performance indicators (KPIs) for cost, quality, and delivery., • Ensure compliance with safety, regulatory, and quality standards, • Drive continuous improvement initiatives in project management processes Requirements Qualifications: · Bachelor’s degree in Engineering, Manufacturing, Project Management, or related field (or equivalent experience). · 5+ years of project management experience in manufacturing, with at least 3 years in injection molding or plastics processing. · Strong knowledge of injection molding processes, tooling, materials, and equipment. · Proven ability to manage multiple complex projects simultaneously. · Proficiency in project management software (MS Project, Excel, Wrike, IQMS or equivalent). · Excellent leadership, communication, and problem-solving skills. · PMP certification or Lean Six Sigma background is a plus. Core Competencies: • Strong organizational and time-management skills, • Customer-focused mindset with the ability to build strong relationships, • Technical aptitude with the ability to interpret drawings, specifications, • Analytical thinker with a hands-on approach to problem-solving, • Team-oriented with the ability to lead cross-functional groups Benefits Standard Health, Dental, Vision Benefits. Generous PTO. 401K Match.

Candidates seeking an Officer position in this community must have a bachelor’s degree from a regionally accredited institution in a technical field, preferably in one of the following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Scien

Up to $25 per hour - As an Administrative Specialist at Franklin Energy, you will: Follow detailed, standard practices and operating procedures to review and process applications and varied, supporting documents for accuracy and completeness; Provide technical support to applicants for the online ap

The teacher will help students develop job readiness skills relative to the applied electrical occupations, including strong work ethic and employability, theory, and technical skills. NYS Teacher Retirement System Pension. Applied Electrical Technology Teacher.

Train and develop the capabilities of Assistant Managers and Manager Trainees in the areas of management skills and technical knowledge in order to provide for growth. Restaurant General Manager Essential Duties and Responsibilities Include:. Exercise sound managerial judgment and decision-making pe

Candidates seeking an Officer position in this community must have a bachelor’s degree from a regionally accredited institution in a technical field, preferably in one of the following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Scien

Job DescriptionDescription: Job Title: Service Technician Refrigeration Reports To: Branch Manager FLSA Status: Non-Exempt Department: Technical Division: Auburn Fisher & Thompson, Inc is committed to achieving excellence in the Dairy Industry by serving the customer with Honor and Integrity. Starting in 1983, Fisher & Thompson has grown into the leading dairy service and equipment company on the east coast. Summary: Refrigeration Service Technicians diagnose and repair technical problems with milk cooling systems and perform general maintenance and service tasks on customer farms. Primary Duties/ Responsibilities: • Diagnose technical problems and determine proper solutions for refrigeration equipment including milk tanks and associated equipment., • Provide service/customer support during field visits or dispatches., • Perform necessary general maintenance and service tasks., • Collaborate with service/sales colleagues when needed., • Tie “workflow” to your daily schedule., • Produce timely and detailed service reports., • Communicate with Service Manager if/when a follow-up call is required., • Engage in continued education when necessary (as requested by your branch manager), • Keep accurate records and files., • Remain reliable during your “on call” timeframes., • Build positive rapport and relationships with our customer base., • Observe all bio-secure measures., • Keep abreast of the latest methods for producing / selling high quality milk., • Follow all company procedures and protocols., • Maintain a professional image., • Be a positive part of the F&T team. Completed tech school program for refrigeration OR completed over 3 years of previous experience in HVAC industry. Strong mechanical aptitude and troubleshooting skills, familiarity with industrial tools. Driven and passionate about providig quality service. Ability to meet objectives independently and as part of a team. Physically able lift/push/pull over 50 pounds. Must have and maintain valid driver’s license and pass driving record check and drug screen. Benefits: Paid Time Off Medical, Dental, Vision, Disability, Basic Life, HSA 401k after 1 year of service Company Vehicle

Job DescriptionDescription: Job Title: Service Technician General Reports To: Branch Manager FLSA Status: Non-Exempt Department: Technical Division: Auburn Fisher & Thompson, Inc is committed to achieving excellence in the Dairy Industry by serving the customer with Honor and Integrity. Starting in 1983, Fisher & Thompson has grown into the leading dairy service and equipment company on the east coast. Summary: Service Technicians diagnose and repair technical problems with milking systems and perform general maintenance and service tasks on customer farms. Primary Duties/ Responsibilities: • Diagnose technical problems and determine proper solutions for equipment that can include, but is not limited to; sorting gates, herd management equipment such as cow scout, milk tanks, and other associated equipment., • Provide service/customer support during field visits or dispatches., • Perform necessary electrical maintenance and service tasks., • Collaborate with service/sales colleagues when needed., • Tie “workflow” to your daily schedule., • Produce timely and detailed service reports., • Communicate with Service Manager if/when a follow up call is required., • Engage in continued education when necessary (as requested by your branch manager), • Keep accurate records and files., • Remain reliable during your “on call” timeframes., • Build positive rapport and relationships with our customer base., • Observe all bio-security measures., • Keep abreast of the latest methods for producing/ selling high quality milk., • Follow all company procedures and protocols., • Maintain a professional image., • Be a positive part of the F&T team., • Other duties as assigned.Requirements: Preferred Skills: Effective verbal and written communication skills. Ability to develop professional relationships with all internal and external customers and vendors. Strong troubleshooting and problem-solving skills. Proficient time management skills with a proven ability to meet deadlines. Ability to prioritize tasks. Capacity to function well in a high-paced and at times stressful environment. Advanced organizational skills and attention to detail. Self-starter able to work independently and as part of a team. Demonstrate a thorough understanding of the technical aspects of the job. Thorough understanding of how to use tools required for the trade. Basic computer skills including exposure to Microsoft, Google and other related software systems. Education and Experience: High school diploma or equivalent. Minimum one year previous trade experience including but not limited to mechanical, electrical, plumbing, HVAC, automation, welding, etc. Prior dairy experience strongly preferred. Must possess a valid Driver’s License and can safely operate a motor vehicle within DMV and DOT guidelines. Management Responsibilities: This position has no management responsibilities. Physical Requirements: Flexibility to reach, bend, stretch, kneel, squat, and or crawl to perform repairs and inspections. Must be able to lift/push/pull 70 pounds at times. Must be able to climb a ladder and or work using scaffolding. Must be able to do fine manipulation with hands. Equipment Used: General equipment used in this position includes but is not limited to power tools, hand tools, multimeter, refrigeration scale, grinders, drills, welding equipment, torches, ladders, skid loader, power lift, forklift, and pallet jacks. As well as laptop/tablet/smartphone and other general office equipment. Safety, Protective Clothing & Gear Requirements: Safety requirements for this position include but are not limited to proper footwear while working on farm and in warehouses. Use of safety glasses, gloves, hearing protection, hard hat, etc. Employees must follow any additional safety requirements as posted in specific job areas. Environmental Conditions: Working conditions potentially associated with this position include, but are not limited to farm environment, hazardous materials, electrical hazards, frequent driving, power tool operation, adverse weather conditions, forklift operation, use of ladder and or scaffolding. Employer’s Disclaimer: All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their manager. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Benefits: Paid Time Off Medical, Dental, Vision, Disability, Basic Life, HSA 401k after 1 year of service Company Vehicle

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities • Perform a wide range of technical tasks including but not limited to:, • OS installations, hardware diagnostics, and software setup, • Structured cabling (including drilling, running, and dressing cables), • Telecom work (punch-downs, demarc extensions, etc.), • Work independently across various environments: retail, medical, restaurant, and corporate, • Maintain a high standard of professionalism with clients, • Be on call and ready to respond to service requests within your territoryPreferred Skills & Experience, • PC and printer troubleshooting experience (a strong plus), • At least 1 year of I.T. or Telecom experience, and one of the following:, • A+ Certification, • Network+ Certification, • OR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications, • Reliable personal vehicle (Public transportation not accepted), • Valid drivers license, • Must have a standard set of tools for basic I.T. and networking tasks (e.g., screwdrivers, cable testers, crimpers)., • Laptop with Ethernet port, • Smartphone with mobile hotspot, • Ability to accept job assignments based on your availability; being on-call 24/7 is a strong advantage., • Punctual, courteous, and presentableCompensation & Perks, • Paid hourly while on site, • 1099 contractor position, • Travel pay included (based on time travel; approx. 80-mile radius from home), • App-based tracking for job time and travel, • Exposure to new and exciting technologies and clients, • Opportunity to expand your skills and industry knowledgeAbout AMG Tech Support AMG is a trusted provider of I.T. and Telecom solutions to professional offices, medical facilities, restaurants, and retail operations nationwide. We specialize in structured cabling, point-of-sale configurations, and network infrastructure. Our mission is to deliver reliable, scalable, and efficient I.T. services that help our clients stay competitive and connected. Ready to take your I.T. career to the next level? Apply today and join a team that values flexibility, skill, and drive.

Production/Operations Manager – Industrial Manufacturing.Clifton Park, NY – Full Relocation Package Available.Annual Bonus + Leadership Growth Path + New Industry Training + 401k Match + Excellent Benefits Package.Are you a Production or Operations Manager with experience in high-volume or indus

Provide hands-on technical support to end users and resolve day-to-day IT issues.

The Technical Service Delivery Lead (XSIAM) acts as the technical focal point for Managed XSIAM customers, driving onboarding, adoption, and ongoing success. Excellent communication skillsable to explain complex security concepts clearly to both technical and non-technical audiences. Value Delivery:

Provide hands-on technical support to end users and resolve day-to-day IT issues.

Able to explain technical information to non-technical people. Performs self-study (reading, research, and practice) to obtain technical proficiency on required products and application. Electronics certification from accredited technical school / military electronics training desired.

Infection Prevention and Control Technical Specialst Job Duties: Consolidate, review and revise Americares existing technical materials related to disease outbreaks, infection prevention and control and health worker safety. Maintain current awareness of technic

Provide hands-on technical support to end users and resolve day-to-day IT issues.

Create, maintain and update installation instructions, training material and other technical documents. Write technical documents in compliance to the company’s established standards and guidelines. Research, write, edit and proofread complex technical data.

Manages patient care in home therapies programs while maintaining cost-effective clinical operations.Provides direction and guidance to the interdisciplinary team providing care to the Home Therapies patients to ensure that the highest standard of care is provided.Collaborates with the Business Unit

As a Remote Technical Support Representative, you will be responsible for supporting customers and handling inquiries from the comfort of your home, including: respond to customer inquiries via phone, chat, and email.