Testing jobs in Tucson, Arizona - Page 15Create job alerts

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description • Perform periodic inspections of engines and aircraft, for example, Major Periodic Inspection (MPI), Hot Section Inspection (HSI) in accordance with appropriate maintenance manuals, • Troubleshoot and repair basic engine and related aircraft problems at on-site and off-site locations, • Assist in complex engine and related aircraft repairs at on-site and off-site locations, • Perform removal, installation, and replacement of engines, accessories, • Disassemble, inspect, and reassemble aircraft engines, • Replace all Line Replace Units (LRU) as required, • Assist with fueling/defueling aircraft as required, • Assist with engine operational check and functional tests, • Assist Aviation Maintenance Technicians in the operation of ground support equipment (GSE), for example, ground power units, tugs, hydraulic mules, and oxygen servicing units, • Assist Aviation Maintenance Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft, • Perform basic sheet metal and electrical repairs as required, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • May perform Designated Inspector (DI) function as qualified by QA, • Assist other employees in the performance of their duties within area(s) of qualificationQualifications, • Minimum 5-8 years of aircraft turbine engine line or shop maintenance or substantiated equivalent experience, • Minimum of 2 years of experience on corporate jet aircraft and a minimum of 1 year of experience on Bombardier aircraft, • Open to experience working in back shop and machine shop environments, specializing in engine repair and maintenance, proficient in completing engine R&R’S, borescopes and written reports - CTH (REQ TBD), • You have an Airframe & Powerplant (A&P) license, • You have the ability to read and interpret engineering documents and repair manuals, • Own basic hand tools and manage tool inventory., • US Citizenship or authorized to work in the U.S. without visa sponsorship #JSFIRM Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description A&P Mechanics play a key role in maintaining the safety and efficiency of customer aircraft. You’ll troubleshoot, repair, inspect, and perform maintenance tasks while working closely with clients to find solutions. • Troubleshoot, repair, install, inspect, and maintain aircraft., • Document work per manuals and regulatory requirements., • Follow safety and Environmental Health & Safety policies., • Participate in 5S activities to maintain a clean workspace., • Operate ground support equipment as required., • Perform mechanical/electrical component removals and installations., • Provide off-site maintenance support when needed., • Assist with fueling, engine removal/installation, and component repairsQualifications, • Valid A&P license by the FAA, • minimum 4-5 years of maintenance experience, corporate and commercia aircraft, • Own basic hand tools and manage tool inventory., • Ability to interpret mechanical engineering drawings., • Must obtain required Ground Support Equipment qualifications., • Willing to work unscheduled overtime, including weekends and holidays., • Able to work outdoors in all weather conditions., • Basic PC skills., • Ability to obtain a SIDA badge (if applicable)., • US Citizenship or authorized to work in the U.S. without visa sponsorship Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description CMT Tech Job Description COMPANY OVERVIEW: CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: Certerra has an immediate opening for a full-time Construction Materials Testing (CMT) Inspector in Tucson, AZ. The position is best suited for someone interested in working in a fast-paced consultant environment, does not mind some travel, and capable of effectively working as part of a collaborative team. Certerra is a consulting firm focused on building a highly skilled, collaborative team to provide innovative geotechnical, environmental and construction materials engineering services. This is an exceptional opportunity to work in the engineering field as part of a team that values collaboration and initiative. As a part of the Certerra/Insight Group family, you will have the opportunity to work on a variety of interesting projects with opportunities for growth and leadership. This is the perfect time to join Certerra. Salary is commensurate with experience and is a combination of pay rate, benefits, bonuses. Duties: As part of an experienced team, you will apply your testing and inspection capabilities to a variety of projects. Applicants shall have an educational or professional background in construction inspection services and have experience evaluating soils, concrete, and asphalt, as they relate to site construction. Report writing and computer skills are required. Experience in airfield pavement construction, landfill construction quality control/assurance is a plus. Requirements, Testing, and Inspection responsibilities include: * • Field and laboratory testing of construction materials., • Maintaining required certifications, • Ability to lift 40-50 pounds, • Coordinating with clients and Certerra/Insight Group engineering and professional state., • Travel to client facilities as needed, • Report writing and computer skills, • Provides clear documentation of findings and results., • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager., • Communicates information to Project Manager and other personnel as directed by the PM., • Assists higher level technicians on complex tasks., • Maintains assigned equipment and related calibration., • Follows safety rules and practices and other safety requirements for all projects., • Be responsible for maintaining quality standards on all projects. Education/Qualifications: * • High School Diploma (Preferred) Certifications/Licenses: * • Valid Driver's License (Required), • ACI Certifications (Preferred) We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Why Join Rincon Research Corporation (RRC)? At Rincon Research Corporation, our primary business is innovating, developing, and fielding digital signal processing (DSP) products and services for the United States Defense and Intelligence Communities in support of national security. We are seeking an Electronics Test Technician to join our team. This individual will perform a variety of product tests using detailed work instructions, test procedures, and engineering documents to test and troubleshoot technologically advanced and a highly diverse family of parts/products including CCAs and chassis. Duties will include set up and operation of testing equipment, troubleshooting, documenting test results, and physical movement of materials on and off testing platforms. The successful candidate will have a demonstrated history of initiative, strong work ethic, function well under pressure, and maintain a success-oriented attitude while working with diverse teams. Rincon Research Corporation (RRC), an employee owned company, is seeking a talented, tenacious, results-driven individual to work in a multi-disciplinary R&D environment with similarly motivated electrical engineers, mathematicians, computer scientists, and analysts who are collectively responsible for creating custom digital signal processing solutions and leveraging them to make an operational mission impact. Come join the team that is creating cutting edge signal processing and geolocation systems for the future! What are the primary responsibilities in the Electronics Test Technician position? • Tests, troubleshoots, repairs, maintains, and installs a wide variety of electronic, mechanical, computer, laboratory, and scientific systems and/or equipment., • Assists in the development of procedures., • Observes, analyzes, and reports test data; and when appropriate, makes necessary repairs to equipment., • Utilizes various engineering and scientific drawings, manuals, and other related documentation in the performance of their tasks. May include configuration/data management. What required background will make you successful? • HS Diploma or AA/AS degree (or other 2-year post high school training), • Ability to work directly from approved procedures, schematics, and assembly drawings as well as wiring diagrams, • Ability to troubleshoot electronic circuits to component level and effectively identify failure trends., • Aid the team in isolating problems between the test environment the units under test and resolve as necessary., • Help select appropriate test equipment and configure it based on test specifications., • Effectively communicate technical issues to the engineering team regarding test reports, • Ability to work in a fast-paced Repair/manufacturing/production test environment., • Must work well in a team environment., • Must be well versed in computer architectures and data protocols in order to facilitate networking/interfacing with test equipment, • US CITIZENSHIP REQUIRED Preferred skills: • Experience in the use of computers and software applications (both desktop and technical), • Associates Degree in Electronic Sciences, • Experience using a wide variety of electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers and Power Meters., • Familiarity in these testing areas: Insertion Loss, VSWR, Phase, gain, SFDR, SNR, Harmonics, S-band, L-band and X-Band frequencies., • Experience inspecting CCAs to IPC 610A or equivalent Where is the position located? This position is located at our Tucson, AZ Headquarters. What benefits does RRC offer? • 100% employer-paid premiums for family medical and dental insurance, employee life insurance, short-term and long-term disability (STD & LTD), • Flexible reimbursement spending accounts for medical expense and dependent care, • Immediate participation and vesting in the company’s Employee Stock Ownership Plan (ESOP) and 401(k) Plan, • Employer contributions to RRC’s ESOP, • Employer matching contributions to the company’s 401( k) Plan

Job Description Job Description Quality Control Manager Job Overview: We are seeking a highly motivated and experienced Quality Control Manager, responsible for implementing and administering the Contractor Quality Control (CQC) Program on federally funded construction projects. This role ensures full compliance with contract documents, approved plans and specifications, and applicable government standards, including USACE/NAVFAC/DoD requirements. You will act as the primary point of contact with Government Quality Assurance (QA) personnel and will oversee inspections, testing, documentation, and corrective actions throughout the project lifecycle. Key Responsibilities: Your responsibilities will include, but are not limited to: • Implementing and enforcing the approved CQC Plan, • Conducting daily quality inspections and managing the three-phase control process, • Coordinating with Government QA representatives and attending required QC meetings, • Reviewing submittals, coordinating testing, and maintaining QC documentation, • Identifying deficiencies and ensuring timely corrective actions, • 5+ years of experience in Quality Control Management in Federal Construction., • Ability to read and interpret blueprints, conceptual drawings, and SOWs., • Familiarity with design-build methods., • Strong leadership skills with the ability to drive internal teams toward timely and successful project outcomes., • Familiarity in project management software (Primavera P6, Procore, etc.)., • Strong knowledge of construction methods, codes, and regulations., • Excellent communication and organizational skills., • OSHA-30, EM 385-1-1, and current CQM-C Certification (*preferred or must be obtained upon hire). Join our team, where your expertise will play a crucial role in maintaining our commitment to excellence in product quality! Job Type: Full-time Work Location: In person Join our team, where your expertise will play a crucial role in maintaining our commitment to excellence in product quality! As part of our continued growth, we are actively working to offer our employees' health insurance. Additional details will be provided as the program is finalized.

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Certerra is a consulting firm with over 65 years of quality service that offers professional services in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. Job Summary: We have a full-time opportunity for an Entry level Staff Engineer with career path of Project Manager. Candidate will work on public and private complex projects within the inspections and testing of construction materials in the field also know called quality control. These opportunities are in all offices in the Certerra/Southwest Division. Responsibilities • Work with project designers and clients to ensure that client specifications are followed., • Knowledge of routine - to complex inspections and testing of construction materials in the field., • Prepare daily reports on observation activities., • Geotechnical lab and field testing, • Review observation and test data for accuracy and completeness, • Assist with proposal scoping, estimating and preparation., • Track project budgets and prepare invoicing., • Assist with training, supervision, and mentoring of junior staff as needed., • Knowledge of construction materials testing and observation experience, preferred., • Ability to read and comprehend plans and specifications, preferred., • Experience with performing IBC Special Inspections, preferred., • Experience ranging from small to large complex construction and/or heavy highway projects, preferred., • High school diploma or equivalent, required., • 4-year Civil Engineering degree, required., • A valid driver's license and a clean driving history, required., • EIT level accreditation preferred, • Excellent written and verbal communication skills with attention to detail, required., • Strong organization and planning skills required. Physical examination required to obtain medical clearance to work, Report from Medical Professional. Ability to stoop, kneel and to routinely lift and carry 30 pounds Clean driving record and capable of being insured for driving company vehicles We are an Equal Opportunity Employer: This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions

Job Description Pay $70,000 - $75,000/year At The Country Club of La Cholla, we are dedicated to enriching the lives of our residents through compassionate care and unwavering support. We are seeking individuals who share our commitment to creating exceptional living experiences and who are eager to contribute to a supportive, family-like atmosphere. When you join The Country Club of La Cholla, you become an integral part of a team that values making a positive difference every single day. If you are driven by empathy and excellence, we invite you to bring your talents to our welcoming community. Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support The Sales Director’s primary responsibility is to maintain or exceed budgeted occupancy and revenue. The Sales Director position is responsible for internal and external sales functions to include lead generation as well as closing sales. The Sales Director develops and executes sales and marketing plans to include marketing events as well as networking with local civic groups, businesses, and medical and non-medical professionals. The Sales Director manages all leads, utilizing a lead management system and referral source database for tracking results. In communities with more than one sales associate, the Sales Director may also directly supervise and manage another sales associate. Essential Functions of the Sales Director • Meet or exceed budgeted occupancy and revenue., • Meet or exceed established Key Performance Metrics (KPI’s)., • Utilize The ENGAGE Experience sales process for internal and external sales functions., • Lead the creation of Strategic Sales and Marketing Trimester Plans with support from the Executive Director, Regional Director of Operations, and Regional Director of Sales., • Effective and successful execution of the Strategic Sales and Marketing Trimester Plans., • Appropriately plan and allocate marketing expenditures., • Adhere to the GMI Brand Style Guide with utilization and creation of any public-facing materials and press releases., • Maintain a current Competitive Marketing Analysis (to be updated at least twice each year)., • Pre-qualify sources of professional referrals in order to determine their eligibility to send qualified potential residents to the community., • Establish and maintain a professional relationship with key figures that have the ability to make or influence referrals to the community., • Conduct business development appointments, events, and presentations with key figures and their associates (i.e., physicians, medical professionals, rehabilitation hospitals, non-medical professionals, etc.) in order to build relationships and generate referrals., • Close sales by responding promptly and guiding residents, families, and/or advisors with making decisions; provide appropriate referrals and resources., • Establish a flexible work schedule that supports the demands of the community outside of typical business hours as needed to provide visits, respond to telephone inquiries, give presentations, set appointments with qualified prospects in order to close sales., • Maintain accurate and current information within the CRM to include lead management as well as referral source management., • Partner with the Executive Director to establish a sales culture within the community., • Train and coach associates on telephone etiquette/ inquiry process, visits, customer service., • Establish a thorough, working knowledge of base rates and care costs within assigned community and adjust with changes as necessary., • Maintain resident, associate, and community confidentiality and adhere to Residents Rights., • Build strong, trusting relationships with community and company associates., • Contribute to community relationships by demonstrating cooperation and professional conduct with residents, families, fellow associates, professionals, and vendors., • Contribute to team effort by being flexible in work assignments by furnishing support, by taking initiative, and by understanding how this position affects and compliments all other community positions., • Demonstrate a high level of organization, attention to detail, ability to meet deadlines, and timely communication., • Support the mission, vision, and culture of the organization through positive communication and leadership., • If applicable, provide direct supervision, guidance, and coaching for additional sales associate(s) within the community., • Bachelor’s Degree in Marketing, Business, Communications, or related field is strongly preferred; equivalent combination of education and experience is required., • Minimum of five years of relevant senor living industry experience with proven results., • Proficient in computer utilization including: Windows, Office, Word, Excel, Outlook, and CRM database systems., • Demonstrate excellent oral and written communication skills and proficiency with email processes and etiquette., • Demonstrate a positive attitude and interpersonal skills to work with various people including associates, residents, families, and professionals., • Promote positive work environment that emphasizes teamwork., • Respond positively to constructive feedback by listening to supervisor, customers, and peers and use it to improve performance., • Ability to travel for meetings as requested by supervisor., • Adherence to the Grace Management, Inc. Sales & Marketing Manual, all Policies and Procedure Manuals and Associate Handbook.

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description • Adhere to General Work Requirements as required in coordination with Quality leadership., • Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft., • Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft., • Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer., • Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership., • Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained., • Perform walk around inspection of aircraft for release from maintenance., • Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service., • Train, coach and mentor employees in the performance of duties in area(s) of qualification., • Provide data to customers as requested. Qualifications, • US Citizenship or authorized to work in the U.S. without visa sponsorship, • You hold a current and valid FAA Airframe and Powerplant License., • You bring at least 5 years of hands-on maintenance experience working on corporate or commercial jets., • You’ve worked on Bombardier aircraft for at least 1 year., • You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment., • You’re skilled at planning and problem-solving, ensuring that challenges are resolved efficiently and commitments are met., • You make decisions with a strategic mindset, keeping broader business goals in view while seizing opportunities., • You thrive in a team-based environment, working well with others to get the job done., • You have a strong “Get It Done” attitude, staying focused and driving results—even in the face of change., • You're customer-focused, committed to understanding needs and building strong internal and external relationships., • You’re passionate about growth and development—both your own and that of those around you., • You’re comfortable using a wide range of measuring tools and hand tools, and can operate and interpret test equipment with confidence., • You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.)., • You’re proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms., • You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved., • You communicate clearly and effectively in English—both spoken and written., • You have the ability to train, coach, and mentor others, helping team members grow and succeed in their roles. #JSFIRM Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description A&P Mechanics play a key role in maintaining the safety and efficiency of customer aircraft. You’ll troubleshoot, repair, inspect, and perform maintenance tasks while working closely with clients to find solutions. • Troubleshoot, repair, install, inspect, and maintain aircraft., • Document work per manuals and regulatory requirements., • Follow safety and Environmental Health & Safety policies., • Participate in 5S activities to maintain a clean workspace., • Operate ground support equipment as required., • Perform mechanical/electrical component removals and installations., • Provide off-site maintenance support when needed., • Assist with fueling, engine removal/installation, and component repairsQualifications, • Valid A&P license by the FAA, • minimum 4-5 years of maintenance experience, corporate and commercia aircraft, • Own basic hand tools and manage tool inventory., • Ability to interpret mechanical engineering drawings., • Must obtain required Ground Support Equipment qualifications., • Willing to work unscheduled overtime, including weekends and holidays., • Able to work outdoors in all weather conditions., • Basic PC skills., • Ability to obtain a SIDA badge (if applicable)., • US Citizenship or authorized to work in the U.S. without visa sponsorship Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description Why Join Rincon Research Corporation (RRC)? At Rincon Research Corporation, our primary business is innovating, developing, and fielding digital signal processing (DSP) products and services for the United States Defense and Intelligence Communities in support of national security. Rincon Research Corporation seeks a Database/Web Engineer to create cutting edge software and cloud computing solutions to challenging national security and defense signal processing, geolocation, and communication problems. You will work in a multi-disciplinary R&D environment with similarly skilled and motivated electrical engineers, mathematicians, and computer scientists/engineers in a highly rewarding personal and professional environment. Come join the team that is creating cutting edge signal processing, geolocation, and communication systems for the future! What are the primary responsibilities in the Advanced Database/Web Engineer position? Core responsibilities include leading the design and implementation of data systems with both web and database components, analyzing and maintaining existing databases and web interfaces, and adding new features to operational systems. This will include implementing signal processing and other algorithms with efficient software, testing with real data, providing applications to front-line customer facilities, and creating effective user interfaces and data visualization tools. A key responsibility is staying up-to-date with the latest technologies, tools, and methodologies and experimenting with new technologies to incorporate innovative solutions into RRC projects. RRC personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference. You’re encouraged and expected to propose things that you believe will improve the applications and frameworks you’re working in. The ability to work unsupervised with minimal direction and the ability to self-start is a must. What required background will make you successful? • Degree (Bachelor's, Master's, or PhD) in Computer Engineering or Computer Science, • Minimum 8 years' experience in software engineering-related discipline, • Proficient in modern software engineering practices for testability and readability, • Proficient in C++ and Python in LINUX environments, • Proficient in SQL and/or NoSQL, JavaScript, CSS, HTML, • Demonstrated ability to design software systems to ensure they achieve functionality, performance, scalability, and maintainability requirements, • Ability to obtain and maintain TS/SCI security clearance, • US CITIZENSHIP REQUIRED Preferred background: • Familiarity with JavaScript frameworks including Vue, React, Angular, • DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP), • Agile development processes, • Ability to mentor other engineers and provide technical advice to project leaders, • Current TS/SCI clearance Where is the position located? This position is located at our Centennial, CO office or our Tucson, AZ Headquarters. Remote work/telework is not available for this position. What benefits does RRC offer? • 100% employer-paid premiums for family medical and dental insurance, employee life insurance, short-term and long-term disability (STD & LTD), • Flexible reimbursement spending accounts for medical expense and dependent care, • Immediate participation and vesting in the company’s Employee Stock Ownership Plan (ESOP) and 401(k) Plan, • Employer contributions to RRC’s ESOP, • Employer matching contributions to the company’s 401( k) Plan Compensation: Starts at $138,000 + benefits. Total compensation is based on qualifications and experience. • Please note this range is specific to employees working in Colorado. Salary ranges for remote candidates working outside of Colorado can be subject to regionalized compensation based on their respective work location.

Job Description CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: hydroGEOPHYSICS (HGI) is a geophysical services company that provides state-of-the-art solutions to our customer’s needs. HGI works within the mining, nuclear, engineering, and environmental industries. We are currently looking to expand our Tucson, AZ office by hiring a full-time Staff Geophysicist, Geoscientist, Hydrologist, or Engineer. This is an entry-level or minimal experience position that assists scientists and engineers with data collection, data analysis, and report writing. Beyond fieldwork, the candidate will help process, model, and visualize earth science and geophysical data, as well as integrating GPS and/or surveying data, on a daily or project basis. Job Responsibilities/Duties: • Will work outdoors with uneven terrain while carrying heavy equipment (50+ lbs.)., • Work independently and with the team., • Problem solve, at times make temporary in-field repairs, and adapt to changing conditions., • Loading and unloading of equipment for field projects., • Vehicle and equipment transport to and from field projects., • Set up, tear down and maintenance of field monitoring equipment., • Other field support as directed by project lead., • Field projects range from two days to two months and requires extensive travel regionally, nationally and globally. This will include remote locations with limited communications and facilities, extreme environmental conditions (health, cold, altitudes, etc.), and possible industrial hazards., • Organization and maintenance of field equipment in accordance with company procedure., • General office support as required when not in the field., • Perform other job-related duties as assigned. Required Qualifications: • Bachelor's degree in Geophysics, Geosciences, Geology, or Earth Science related Engineering discipline with 2-4 years of applied experience, inclusive of geophysical field work utilizing data acquisition equipment, OR a Master's degree in Geophysics, Geosciences, Geology, or Earth Science related Engineering, Hydrology, or Environmental discipline with little to no experience., • Degree must include advanced math and physics. A transcript will be required., • Ability to flourish with minimal guidance, be proactive, and handle uncertainty., • Outstanding communication skills, both written and verbal, as well as being organized and detail-oriented., • Schedule flexibility, priorities can change quickly as we are a service based company and have to react quickly to client demands., • Enjoy travel (nationally and internationally), remote destinations, and working outdoors with complex scientific equipment. The position requires up to 70+% travel. Field projects can range from two days to two months and require extensive travel regionally, nationally and globally., • Valid driver’s license and a clean driving record., • A current passport or ability to secure a passport within 90 days of hire date., • This employment opportunity involves government contracts. Per those contract requirements, applicants must provide proof of US citizenship., • Organized and enjoy working independently or with a team., • Ability to problem solve and be able to adapt to changing conditions., • Inclined to working with electronics and building new tools to streamline projects., • Proficient with internet research, email, MS Office, Word and Excel (formula use, tables, lookups, etc.)., • Prior experience with geophysical fieldwork and data collection, environmental sampling/logging, laboratory or scientific instrumentation is encouraged., • If experienced, proficiency in electrical, seismic, and electromagnetic methods is a plus., • Professional Geophysicist (PGP) and/or Professional Geologist (PG)/Certified Hydrogeologist (CHG), or a willingness to apply/study for a PGP license., • Bilingual English/Spanish speaking skills., • Experience driving a vehicle/trailer combination., • Results Driven, • Team Player, • Positive attitude that contributes to a positive work environment, • Maintain a quick and steady pace throughout your work shift, • Highly motivated self-starter with ability to perform well with varying degrees of supervision, • Consistency and Reliability, • Communication, • Creative Thinking, • Growth Mindset, • Research, Analysis and Evaluation, • Medical, Dental & Vision Coverage, • Flexible Spending Account (FSA), • Health Reimbursement Account (HRA), • Company Paid Life Insurance, • Tuition Reimbursement, • Paid Time Off (PTO), • Paid Holidays, • 401K Plan, • Company cell phone or cell phone stipend, • Employee will be required to adhere to large amounts of standing, walking and climbing., • Will talk and hear to communicate., • Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools repetitively., • Will be required to lift, carry and move up to 50lbs over uneven terrain., • With another person required to lift and move equipment greater than 50lbs but usually less than 150 pounds, • Working Conditions while Performing Essential Functions: This position is performed in an office and field setting. The atmosphere is fast paced and deadline oriented with focus on safety and quality. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated based on their ability, competence, and performance of the essential functions of their positions. There will be no discrimination based on race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such people will be hired based on their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions. Veterans encouraged to apply

Job Description About Alta Environmental and Infrastructure Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects. Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you. We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sustainable solutions. Position Overview Alta E&I is seeking a motivated and detail-oriented Surveyor Assistant to join our Tucson Survey team. As a Surveyor Assistant, you will provide essential support to a survey Crew Chief performing land surveying tasks on a survey field crew. This position requires the ability to work outdoors, in sometimes extreme conditions, performing tasks safely and accurately while maintaining a calm and professional demeanor. Responsibilities and Expectations: A Surveyor Assistant directly assists a Crew Chief on a survey field crew performing the following tasks: • Ensure crew truck is supplied, and equipment batteries are charged daily, • Clear brush, dig holes, drive posts, set stakes and monuments, • Handle equipment carefully, call out readings, write numbers, mark distances, and use measuring devices as directed, • Memorize and follow established guidelines and procedures, • May assist other crews and team members, • Learn to conduct field measurements and observations, • Learn to assist with maintaining field notes as directed Must be able to work outdoors in all weather conditions and rugged terrain. Must be capable of lifting up to 50 pounds. Schedule/Overtime Regular core hours for this position are from 5:00 a.m. to 1:00 p.m. (Summer schedule) transitioning to 6:00 a.m. to 2:00 p.m. (Winter schedule). Most work is performed during core hours, but occasionally overtime may be required before and/or after these core hours. This is a full time position. Travel Most assignments for this position will be done locally. However, occasionally assignments may be out of town and overnight travel could be required. Qualifications: • High school diploma or GED required, • Must have a valid driver's license, • Must be dependable, punctual, motivated and eager to learn, • Ability to follow oral and written instructions, • Ability to communicate effectively, both orally and in writing, • Must be well organized and detail oriented See your impact. How many people can drive by a highway, school, or major company and say, “I helped build that?” At Alta, every employee can. The work we do is visible in the infrastructure communities rely on every day. We’re passionate about developing people. Many of our leaders began their journey in entry level positions, and worked their way up into management. We invest in you from day one with hands-on training, paid certifications, and mentorship to help you progress in your career. Working at Alta means: • Career mobility: clear paths to grow into leadership roles., • Multi-disciplinary exposure: civil, survey, geotechnical, materials testing, environmental, EHS, etc., • Investment in you: paid certifications and ongoing training., • Culture of belonging: supportive teams where your work is recognized., • Competitive hourly rate, • Opportunities for professional development and career advancement. EQUAL EMPLOYMENT OPPORTUNITY POLICY STATEMENT. It is the policy of Alta E&I not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.

Job DescriptionDescription: Elevate Your Oral Surgery Career with Purpose – Join DOCS Dental Looking to take your skills to a unique and rewarding environment? At DOCS Dental, our part-time Oral Surgeons provide exceptional, specialty care in modern, fully digitalized clinics located on Army and Air Force bases nationwide. We serve those who serve, offering a steady, exclusive patient population of military families, veterans, and federal employees. This is more than a job—it’s an opportunity to practice with clinical autonomy, work alongside a supportive and experienced team, and make a meaningful difference with every procedure. What You’ll Enjoy at DOCS Dental: • Competitive Daily Compensation or Percentage of Production, • Flexible Scheduling: 1 - 2 Saturdays/ month; initially with opportunity to increase., • Malpractice Insurance Coverage, • Clinical Support: A fully staffed team to assist with patient care and clinical flow, • Perform a wide scope of surgical procedures including extractions (routine and surgical), alveoloplasty, and other dentoalveolar surgeries, • Provide in-office sedation (as credentialed and permitted by state license per office), • Collaborate with general dentists and dental assistants to ensure safe and efficient patient care, • Document clinical findings and treatment plans in digital patient charts, • Follow proper infection control protocols and safety procedures, • Modern Clinics: Work in state-of-the-art facilities with digital radiography, Itero scanners, and updated surgical equipment, • Consistent Patient Base: Treat an eligible military-affiliated population with steady referrals for oral surgery needs, • Team-Based Environment: Work with experienced professionals in a respectful, mission-driven culture, • Make an Impact: Your expertise helps improve the quality of life for service members and their familiesRequirements:, • DMD or DDS from an accredited U.S. dental program, • Completed Oral & Maxillofacial Surgery residency and board certification or eligibility, • Active, unrestricted state dental license, • CPR/BLS Certification, • DEA license (if performing sedation or prescribing medication), • Ability to pass background screening, drug testing, and obtain Real ID for base access DOCS Health is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Welcome to the unique industry of Construction Materials Testing & Inspections where the work you do is vital to construction and the growth of our communities! Your Role as a Field Technician: You will learn to inspect construction work, performed by contractors/trades, to check it complies with the requirements of the project specifications and building codes. ProTeX Field Technicians conduct a variety of construction inspections and testing each day at several different construction sites throughout the valley. Examples of Inspections and Testing Include: Post-Tension Foundation Inspections; Anchor Inspections; Drainage Inspections; Soil Testing, Concrete Sampling; Materials Sampling. Work Schedule: The Field Technician is a full-time position working upwards of 40 hours a week, Monday – Friday, and on a rotating Saturday schedule. We work when the contractors are working, which means some of our jobs start as early as 1:00 AM when concrete is being poured. The daily schedule, sent out the night before- between 5PM-6PM, provides the time of your first inspection the next day. You can expect to drive up to 200 miles a day, in a company-provided truck, as you move between job sites. Work Requirements: Must be able to work independently with little to no supervision. Lift up to 75 lbs., have a valid driver’s license, a clean driving record, and a desire to learn and grow with Arizona’s leading Geotechnical testing and inspection company. No Experience Required - at ProTeX we're Invested in YOU As a valued member of the ProTeX team, we will train you, mentor you and help you advance through, and pay for, certifications with ACI (American Concrete Institute), ATTI (Arizona Technical Training Institute), PTI (Post-Tensioning Institute), and more. As you gain experience and acquire certifications you will have the opportunity to advance from a Level I Technician up to a Level IV Senior Field Technician. BENEFITS: Starting pay is $18/hour + Self-Paced Pay Progressions + Paid Certifications Work truck- must complete training, to commute from home to the office/worksite Paid time off and 6 paid holidays/year Company Sponsored Medical, Dental, & Vision Insurance Plans 401k with a 50% Company Match PPE and Uniforms provided, including $100 to help purchase work boots and $25 for jeans Powered by JazzHR K83NpEA6Ft

Job Description Our client, a world leader in life sciences and diagnostics, is looking for a “Systems Engineer” based out of Tucson, AZ Job Duration: Long Term Contract (Possibility Of Extension) Pay Rate : $50/hr - $60/Hr on W2 Company Benefits: Medical, Dental, Vision, Paid Sick leave, 401K We are seeking a hands-on Senior Systems Engineer to support Product Development and On Market Support (OMS) activities. This role requires strong experience with electro-mechanical systems, verification and validation (V&V), and leading technical teams to drive product improvements and resolve complex system issues. Key Responsibilities: • Lead development and execution of verification & validation (V&V) strategies and testing., • Drive requirements engineering, risk management, and FMEA activities., • Analyze data, perform root cause analysis, and implement product or process improvements., • Lead cross-functional teams in design reviews, DOE testing, and troubleshooting efforts., • Plan and execute engineering projects, identify technical risks, and deliver innovative solutions. Required Qualifications: • Bachelor’s degree in Systems, Biomedical, Electrical, Mechanical, or Chemical Engineering with 8+ years of experience OR Master’s degree with 4+ years of experience., • Strong experience working with electro-mechanical devices., • Proven leadership in technical problem-solving, V&V testing, and risk management. Preferred Qualifications: • Experience with IEC 61010, AAMI, ISO 13485, or SAFe Agile methodologies., • Hands-on expertise in DOE, FMEA, and structured problem-solving tools., • INCOSE certification is a plus. If interested, please send us your updated resume at /

Job Description At Areté, we are on the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation’s most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. Areté is seeking an Engineering Service Representative (ESR) to support the expanding Field Operations Sustainment program, providing field and laboratory expertise as part of a small, highly skilled, multidisciplinary team. In this role, you will interface with engineers and sensor users to deliver technical support for complex electro-optical sensors, computing and processing systems, and associated platform integration. The team collaborates with internal and external partners to deliver and sustain advanced airborne optical capabilities to ensure the warfighters have the most capable systems available to meet the nation’s biggest threats. This position offers a unique opportunity for a driven, action-oriented professional to help shape the future of system support. Field activities include software and firmware updates, troubleshooting, hardware modifications, documentation, configuration management, and stakeholder communication. Laboratory work includes building, testing, and repair of system components. The role requires periodic travel and temporary duty assignments ranging from 1 to 13 weeks at locations within the continental United States (CONUS) and overseas, with travel expectations of approximately 30% annually. Primary responsibilities: • Participate directly in the maintenance and sustainment of fielded systems., • Interface with system operators for maintenance and troubleshooting of fielded systems., • Utilize knowledge gained from and through field experience to provide onsite technical support and assistance directly to customers when required., • Perform technical electronics work in a Laboratory environment., • Effectively communicate technical information both written and verbally., • Perform administrative tasks necessary in day-to-day performance of the system maintenance effort, to include:, • Planning, coordination, monitoring and performance of tasks., • Parts logistics (shipping, receiving, packaging, and inventory management)., • Maintain detailed logs and notes of work and modifications performed for internal and customer reference., • Coordinate with offsite engineering and production staff as required for troubleshooting and to ensure consistent, effective field work is performed., • May require quick turn travel to support the customer and ensure availability of system capabilities. Health & Wellness: • Medical, Dental & Vision Insurance, • Life and Long-Term Disability (LTD), • Vision Reimbursement, • Company-funded 5% contribution to your 401(k) retirement plan, • Company-funded 5% contribution to your Employee Stock Ownership Plan, • Flexible Scheduling, • Paid Time Off (PTO), • Creativity and innovation in solving challenges, • Integrity and responsibility in all actions, • Collaboration across teams and specialties, • Responsiveness in fast-paced environments, • U.S. Citizenship Required, • Active Top Secret clearance with ability to obtain SCI access, • Associate’s degree or 6+ years of related Experience, • Ability to work independently and in a non-office / field environment., • Bachelor’s Degree or higher in one of the following areas: Electrical/Computer Engineering, Optical Engineering, Systems Engineering, • CompTIA Security+ Certification, • Experience with Linux, • Experience working in high-performance computing (HPC), • Experience working with VNIR/MWIR optical sensing systems, • Experience supporting military aviation maintenance activities Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at 818-885-2200 for assistance.

Job Description About Optima Medical: Optima Medical is an Arizona-based medical group consisting of 30 locations and over 130+ medical providers, who care for more than 200,000 patients statewide. Our mission is to improve the quality of life throughout Arizona by helping communities "Live Better, Live Longer" through personalized healthcare, with a focus on preventing the nation's top leading causes of death. We go beyond primary care with a full spectrum of services including cardiovascular health services, behavioral health, allergy testing and immunotherapy, in-house lab testing, imaging, chronic disease management and other specialty health services. We aspire to aid the growth of our company by welcoming the most qualified and deserving candidates aboard! Optima is currently seeking a Front Desk Representative to join our team! Front Desk Receptionist Responsibilities: • Verify insurance coverage, • Collect past due balances and copayments upon checking in, • Answer phones and relay messages, • Confirming patient appointments, • Schedule initial and follow up appointments, • 1yr Medical Front Office (Preferred), • 1yr Customer services experience (Required), • Experience with EMR, • Excellent written and verbal communication skills, • Detail oriented, • Positive attitude that welcomes teamwork, • Substantial growth opportunities, • Leadership and mentoring, • Resources to further career, • Fun work environment (lunches, events, holiday parties), • Benefits (medical/vision/dental/401k/paid holidays), • Supportive and positive work environment

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER I/II Rocket Lab's Optical Systems division solves mission-critical space domain and Intelligence, Surveillance, and Reconnaissance (ISR) challenges for Department of Defense (DoD) and Intelligence Community (IC) customers. Our vision is to revolutionize the space-based payload market with innovative and novel designs for space, terrestrial, and airborne environments. Building on more than 20 years of electro-optical and infrared systems innovation from Geost, Optical Systems delivers solutions to the warfighter for responsive, scalable sensing solutions across all orbital domains. As a Senior Electrical Engineer I/II based at our Optical Systems site in Tucson, Arizona, you will participate in the development and test of electrical systems/subsystems hardware for our space payload programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the space payloads team, you will have unique opportunities to develop optical systems that will be on-orbit. Join a driven team of pioneers relentlessly tackling projects, delivering on the impossible, and making an impact on the future of space! (Please note: this position can be hired at the Senior Electrical Engineer I or Senior Electrical Engineer II level) WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • PCBA design verification testing and system integration testing, • Circuit analysis, including power, tolerance, and reliability related, • Harness development, routing design and testing, • Production manufacturing support as needed QUALIFICATIONS YOU'LL BRING AS SENIOR ELECTRICAL ENGINEER I: • Ability to obtain and maintain a U.S. Government security clearance, • Bachelor's degree in engineering or other technical discipline, • 5+ years of electrical hardware design experience, including schematic capture and PCB layout, • Experience with analog and digital electronics design QUALIFICATIONS YOU'LL BRING AS SENIOR ELECTRICAL ENGINEER II: • Ability to obtain and maintain a U.S. Government security clearance, • Bachelor's degree in engineering or other technical discipline, • 8+ years of electrical hardware design experience, including schematic capture and PCB layout, • Experience with analog and digital electronics design THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PHD in electrical or computer engineering; or other engineering discipline, • Proficiency with Altium Designer for schematic capture and layout of complex PCBs, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, • Knowledge with processors, FPGAs, switch mode power supplies, communications interfaces, and analog instrumentation, • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Proficiency performing circuit analyses in SPICE and Excel, • Demonstrated success working in a dynamic environment and ability to manage competing priorities ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionLaboratory DirectorTucson, AZ ABOUT THE COMPANY: This acute care hospital is a well-established healthcare provider serving the Tucson, Arizona community. The organization is committed to delivering high-quality, patient-centered care through clinical excellence, advanced technology, and compassionate service. With a strong focus on safety, compliance, and operational efficiency, the facility supports a collaborative environment where leaders play a critical role in advancing healthcare outcomes and supporting the needs of the community it serves. JOB SUMMARY: • Provide leadership and oversight for all Laboratory Services within an acute care hospital setting., • Ensure laboratory practices prioritize patient safety and regulatory compliance., • Oversee specimen collection and testing for patients from neonates to geriatric populations., • Direct daily laboratory operations, including staffing, workflow, and quality control., • Manage operating and capital budgets for the laboratory department., • Lead laboratory technical development, including instrumentation and LIS integration., • Hire, coach, discipline, and evaluate laboratory staff., • Perform additional duties as assigned. REQUIREMENTS: • Bachelor’s degree in Medical Technology or related health science specialty., • Meets CLIA requirements for General Supervisor., • Minimum of 5 years of progressive laboratory leadership experience in an acute care setting., • Registered or registry-eligible through ASCP, NCA, AMT, or equivalent., • State licensure as required. PREFERRED: • Prior Laboratory Director experience., • Master’s degree in Allied Health, Health Administration, or Business. WHAT’S IN IT FOR ME: • Senior laboratory leadership role overseeing diagnostic services in an acute care hospital, • Direct impact on patient safety and care quality through accurate, timely testing, • Ownership of laboratory operations, staffing, and budgets, • Opportunity to lead technical advancement, including instrumentation and LIS integration, • Career growth and stability within a nationally recognized healthcare system BENEFITS: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Relocation assistance A further detailed conversation would allow us both to determine if this position would be a good fit for you. Please share this information with anyone who you think may be qualified and interested to learn more about this opportunity. For consideration, please call (817) 989-9700 or email #DirectorLaboratory, #LaboratoryDirector, #ClinicalLaboratory, #HospitalLaboratory, #LaboratoryLeadership, #LabManagement, #PatientSafety, #DiagnosticServices, #LIS, #CLIA, #ASCP, #AMT, #AcuteCare, #HealthcareLeadership, #TucsonAZ, #ArizonaHealthcare, #NowHiring

Job Description Part Time Male Specimen Collector Location: Tucson, AZ Schedule: Part-Time | Tues & Thurs 9am-10:30am, Mon, Wed, Fri on-call 8:30am-3pm- (25 hours/week) Seeking: Male candidates required for observed collections of gender identified male patients. Help make a positive impact in your community! Millennium Health LLC is an accredited specialty laboratory with more than a decade of experience in medication monitoring and drug testing services, helping clinicians monitor use of prescription medications and illicit drugs supporting improved clinical decision-making as part of treatment for millions of Americans with chronic pain, mental illness, and substance use disorders. The Specimen Collector is a key role at Millennium Health. As our representative, this position provides exemplary care and exceptional customer service to patients, clinicians, and our laboratory. As a Specimen Collector: • Collect patient urine and/or oral fluid (saliva) specimens, • Process and package collections for shipping, • Serve as an intermediary between the practice / clinic and the laboratory, • Record patient information, physician order details, and pertinent laboratory information, • Resolve specimen concerns with billing or patient information in ordering portal, • Order and maintain collection supplies inventory onsite, • Observe collection for Millennium Health specimens (when applicable) Ideal Candidate: • 6+ months of experience as a specimen collector or 1+ years of experience in the medical field, directly supporting patients preferred, • 2+ years of customer service experience can be considered in place of medical experience, • Demonstrated ability to navigate a smart phone and computer required, • Valid driver’s license required; reliable transportation, • Medical insurance/billing and/or familiarity with medications/diagnostic codes is a plus, • Ability to ensure HIPAA, HiTrust, Confidentiality and Compliance policy, procedures, and standards are always adhered to., • Ability to ensure administrative, physical and technical cyber security controls are always adhered to, • High School diploma or equivalent required, • Physical requirements: sitting 60%, walking 20%, standing 20%, lifting up to 20 lbs. Millennium Health is a CLIA Certified and CAP Accredited specialty laboratory. We partner with a trusted and accredited background screening provider, to conduct pre-employment background checks. As part of our screening process, we will review the following: • National, federal, and county criminal history, • Global watchlist search, • Social Security Number (SSN) trace, • FACIS (Fraud and Abuse Control Information System) Level 3 search, • SAM (System for Award Management) and OIG (Office of Inspector General) exclusions, • Education verification, • Driving record (Motor Vehicle Report), • 5-panel urine drug screening All employment offers are contingent upon the successful completion of this background check. Offers may be rescinded if the results do not meet the standards established for the position. Benefits Benefits Offered: • 401k with Company Match, • Paid Time off and Holidays, • Behavioral and Health Care Resources, • Salary Range: $18-21/hr., • Salary offered is dependent on qualifications, experience, and geographical location. Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Millennium Health is an Equal Opportunity/Affirmative Action Employer and E-Verify participant. All qualified applicants will receive consideration for employment without regard to race, color, creed, sex, national origin, disability, gender identity, sexual orientation or protected veteran status.

Job Description Pay starting at $19.00/hour Full-time and part-time available Must have the following: • Valid ID/Driver’s License and Social Security card or Birth Certificate OR Passport, • Valid Fingerprint Clearance Card (or application number), • Valid CPR/First Aid certification (must be completed in person), • Valid Food Handler’s Card, • Arizona Caregiver Certificate(s) – certified in Personal, Supervisory, and Directed Care Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support The primary responsibility of the Resident Care Assistant (RCA) is to provide physical and psychosocial care to all residents in a manner that promotes dignity, choice, and individuality. The Resident Care Assistant reports to the shift supervisor as well as the Wellness Director. Essential Functions of the Resident Care Assistant • Provides all necessary care and services to assigned residents and assists other wellness department associates as needed., • Works collaboratively with peers and other team members., • Provides assistance with activities of daily living such as with bathing, dressing, personal hygiene (includes: shaving, oral care, nail care, hair care, foot care), toileting, eating, and ambulation/mobility., • Maintains professional demeanor at all times when interacting with residents and families., • Reports any suspected or witnessed instances of verbal, mental, or physical abuse to licensed staff immediately., • Utilizes safe transfer techniques when assisting residents with mobility., • Washes residents’ laundry as needed., • Understands and uses Centers for Disease Control and Prevention Standard Precautions, OSHA's Occupational Exposure to Bloodborne Pathogens standard, and follows established infection control procedures, hazardous communication, and other safety rules., • Documents provision of services on company forms., • Operates designated medical equipment, copy, scan, fax machines, and telephone., • Escorts residents and coordinates internal transportation needs., • Assists residents with personal correspondence/telephone use when requested., • Observes and reports changes in residents’ physical condition and cognitive/emotional status to Wellness Director or supervisor, as needed., • Conducts room checks and resident rounds., • Monitors for environmental safety hazards., • Respond to emergencies in a prompt and calm manner; Immediately reports such emergencies to the supervisor., • Uses tactful, diplomatic communication techniques in potentially sensitive or emotionally charged situations., • Participates in and supports the resident-centered activities program., • Care for sensory enhancement devices such as eyeglasses and hearing aids., • Completes housekeeping tasks such as bed-making, linen changes, vacuuming, emptying trash, and cleaning bathroom., • Acts as ambassador and public relations representative to guests and other off-campus visitors., • Copies special paperwork or forms., • Assists in a variety of tasks related to dining (escort residents to dining room, assist with set-up and clean tables, serve meals, bus tables, etc.)., • Demonstrates an appreciation of the heritage, values and wisdom of the residents, and an understanding of the aging process., • Collaborates with associates in other departments to assure necessary care and services are provided., • Participates in projects or committees as assigned., • Performs related duties as assigned., • Ability to read, write, and speak in English., • Certification by state approved program, if required., • Satisfactory completion of the company Resident Assistant skills competency checklist., • Be in good physical health and free of communicable diseases; Lifting, bending, and pushing medication cart about residence is required., • Must be able to lift 40 pounds., • Completion of drug testing and criminal background check upon hire and upon request of supervisor.

Job DescriptionSalary: Hardware Support Engineer Location: Arizona (Canary Systems Office) Job Type: Full-Time | In-Office Only Industry: Technology / Engineering / Instrumentation Company: Canary Systems, Inc. About Us Founded in 1997, Canary Systems, Inc. is a fast-growing, innovative technology company specializing in civil engineering, monitoring and instrumentation. Our work spans multiple industries including: • Construction, • Mining, • Geotechnical, • Industrial, • Public Infrastructure We are recognized globally for our proprietary MLSuite software and leadership in risk management and monitoring solutions.Headquartered in New Hampshire, we have additional offices in Arizona, Tennessee, California, Canada, Australia, Brazil, and Indonesiaoffering strong career advancement and professional growth opportunities. Position Summary Were hiring a Hardware Support Engineer for our Arizona office. This is a hands-on, in-office role focused on: • Supporting clients and internal teams, • Integrating hardware and software systems Key Responsibilities • Troubleshoot and resolve technical issues with clients and internal teams, • Manage client support tickets through internal systems, • Learn and utilize:, • CRBasic programming (Campbell Scientific devices) Training provided, • MLBasic Proprietary language for MLBase/MLRemote hardware, • Integrate instrumentation with MLSuite software:, • Research instrument capabilities, • Define technical requirements, • Document integration methodologies, • Perform thorough testing of hardware and software, • Provide ongoing technical support Preferred Qualifications • Strong technical troubleshooting ability, • Solid understanding of electronics, • Familiarity with:, • Serial communication protocols, • Wi-Fi networking & configuration, • TCP/UDP network protocols, • Binary and hexadecimal math, • CRBasic programming (preferred, not required) Ideal Candidate Traits • Independent and collaborative work style, • Detail-oriented and well-organized, • Strong verbal and written communication skills, • Self-driven and proactive, • Willingness to travel as needed Benefits & Perks • Supportive and skilled team environment, • Clear career advancement path, • Competitive salary and comprehensive benefits:, • Health and life insurance, • Paid time off (PTO), • Retirement plan, • Volunteer PTO, • Fitness reimbursements, • And more Additional Info Location: Arizona office Work Model: Full-time, in-office Equal Opportunity Employer No phone calls, please Ready to Join Us? Be a part of our innovative team and build a rewarding career in technology and engineering. Apply now!

Job Description It's your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. Join our team as an A&P Mechanic where you'll inspect, repair, and overhaul aircraft systems and components with precision and expertise. From engine rebuilds to structural repairs, you'll work hands-on using technical data, FAA regulations, and advanced tools to ensure peak aircraft performance and safety. This dynamic role offers the opportunity to tackle diverse tasks daily, from electrical systems and hydraulics to documentation and shop maintenance, in a fast-paced, safety-driven environment alongside a skilled team of A&P Mechanics. As a 24/7 operation, we have openings across all shifts, including days, evenings, weekends, and 12-hour schedules. Candidates must be flexible and willing to work any shift based on operational needs. Preference is given to those available between 2:30 PM and 7:00 AM, including overnights and weekends. Some schedules may qualify for shift differential. Overtime—both scheduled and unscheduled, including holidays—may also be required. DUTIES/RESPONSIBILITIES: • Inspect, repair, service, and overhaul aircraft and related components., • Research technical data and perform disassembly, repair, cleaning, adjustment, assembly, testing, and calibration of aircraft components using company tools and equipment in accordance with maintenance manuals, FAA regulations, and company procedures., • Repair, replace, and rebuild aircraft structures including wings, fuselage, rigging, surface controls, plumbing, and hydraulic units., • Read and interpret manufacturers' and airlines' maintenance manuals, service bulletins, and other specifications to determine repair or replacement methods., • Complete documentation such as identification tags, inspection forms, routing tags, and component removal logs., • Disassemble and inspect aircraft and engine parts for wear or defects., • Repair or replace defective engine parts; reassemble and install engines., • Adjust, repair, or replace electrical wiring systems and aircraft accessories., • Perform miscellaneous service duties including cleaning, greasing, servicing, moving aircraft parts, and checking breaks., • Ensure training records are documented and signed by appropriate personnel., • Assist with maintenance of company equipment and general shop housekeeping., • 401K with Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance, • Strong organizational and planning skills with the ability to meet deadlines., • Ability to read, write, and comprehend English., • Follow verbal and written directions., • Skilled in interpreting and applying technical data., • Ability to safely drive and operate manual vehicles and equipment., • Capable of working independently or with minimal supervision., • Valid A&P License required., • Valid Driver's License required., • 3-5 years of experience in aircraft maintenance as an A&P Mechanic preferred., • Ability to sit, stand, and walk for extended periods of time., • Frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level., • Occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 lbs. unassisted., • Requires eye-hand coordination and manual dexterity., • Aircraft ground servicing equipment including tugs, tractors, hi-lifts, trucks, servicing carts, and test equipment., • Aircraft ground servicing equipment including tugs, tractors, hi-lifts, trucks, servicing carts, and test equipment., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • An employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct or condition a situation. Duties not listed within the position description may be required of the employee at the discretion of the department management. Job functions may vary due to irregular working conditions or multiple shift positions. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodations for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodations during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job Description Who We Are: As Paragon celebrates 28+ years of providing award-winning life support and thermal control solutions for extreme environments, we've recognized that it is our employees that keep our business thriving. By any measure, Paragon Space Development is an exciting and rewarding place to work. Our goal is to hire the best and allow you to do the work that you enjoy! We are interested in developing individuals who enjoy a challenge and like working on a variety of projects in a fast paced environment. We are committed to our employees and providing an inclusive work atmosphere that allows our talent to grow both personally and professionally. Position Summary: Powered by endlessly curious engineers with an unwavering mission focus, for nearly three decades Paragon Space Development Corporation has pioneered advances in life support systems for space. We create innovative mission-critical systems that enable our customers to perform beyond expectations and ensure that our users return home safely. We are involved in a wide range of projects for commercial, government, academic, and private applications. We are leading the way with systems that work in Earth's stratosphere, in orbit, on the moon, and for manned missions to Mars! Consider joining our innovative, impactful company as we build life support systems of the future. As an Electrical Test Engineer, you will be responsible for developing and maintaining an integrated systems approach to the test and evaluation of products across their lifecycle from design, development, qualification, production, and delivery to the customer. You must bring a high-level, "big picture" thought process and understand how products will be tested from component to full system level to ensure design robustness and test efficiency. Description of Duties: • Provide expertise for the testing of electrical hardware such as circuit boards, power supplies, and integrated electrical systems with assistance from other test engineers, • Provide guidance to programs and projects regarding strategies for and execution of development, acceptance, and qualification test campaigns with assistance from other test engineers, • Write test plans and procedures to support program milestones, • Execute test procedures at both internal company facilities and external facilities, • Generate formal test documentation such as technical memorandums and test reports, • Present test results to both internal and external customers., • Participate in the continuous improvement of the company's approach to testing, • Knowledge of, and skilled in, the development and execution of test plans and procedures as they relate to the development, acceptance, and qualification of electrical hardware and systems, • Ability to troubleshoot test setups and consider solutions in either the hardware or software domains, • Knowledge and experience with electrical hardware (e.g. circuit boards, power supplies, controllers, integrated electrical systems, instrumentation, and sensors), • Knowledge and experience in the engineering product lifecycle, ranging from requirements development through design, manufacture, test, and operations, • Ability to develop practical and tailored test solutions, • Skill in Microsoft Office applications (Excel, Word, PowerPoint, Visio, Project), • Ability to effectively communicate in both written and spoken form, • Ability to establish and maintain effective, positive work relationships; have creativity, flexibility, and resourcefulness; have discriminating judgment, tact, and sense of humor, • Ideally, but not required, knowledge of, and skills in, NASA human spaceflight hardware Life Cycle, Certification, and Engineering processes, • Ideally, but not required, knowledge of, and skills in, LabVIEW programming, • Bachelor's degree in Electrical Engineering or equivalent field and 1-2 years with system and/or hardware test experience Job Posted by ApplicantPro

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Machinist II – CMS. Position Summary This position supports operational excellence in the conventional machine shop to drive productivity, quality and continuous improvement. We expect this individual to be a leader who collaborates with the Sargent team to exceed organizational goals. Responsibilities • Ensure safety is the foundation of daily work through vigilance and accountability., • Maintains a clean and safe work area at all times., • Model Safe behaviors at all times., • Follow company quality control standards to include in process inspection and documentation., • Knowledge of safety standards for equipment being run., • Must be able to make decisions, communicate effectively across departments, and work well with others in a team environment., • Performs operations per specifications on drawing/print and documented procedures., • Calculate dimensions and tolerances and use micrometers and vernier/digital calipers., • Setup and run manual mills, lathes, surface grinders and other machines as needed., • Ability to monitor operations and quickly react to non-confirming operations as they occur., • Produce and inspect parts with the ability to offer continuous improvement opportunities., • Deburr precision components and tooling to proper specifications., • Must be a U. S. Citizen., • High school diploma or GED required., • Must be able to read and write English., • 2 years’ experience running a conventional lathe, mill, and surface grinder., • Experience in tool making and self-directed processing for tool build., • Application of machine shop theory and procedures, shop mathematics (algebra, geometry and trigonometry)., • Ability to read, interpret technical drawings, routers, work instructions and specifications., • Knowledge of measurement techniques for inspection., • Strong communication, critical thinking, and multi-tasking abilities., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects., • The employee is occasionally required to push/pull and reach above shoulder level., • The employee must be able to carry/lift up to 40 pounds and be able to rotate the item being handled., • Work on feet for entire shift., • Experience with tight tolerance aerospace components., • Knowledge of aerospace materials and machine tool selection., • Knowledge of GD&T. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job DescriptionPart-Time Test Engineer Who we are: Lunewave Inc. is a privately held technology company developing disruptive antenna and radar sensor technology by leading experts in millimeter wave frequency engineering. Our products are geared towards a variety of markets including automotive, telecommunications, aerospace, and research for applications such as autonomous transportation, 5G delivery, and drones. Description Summary: Lunewave Inc. is looking for a part time test engineering to join the hardware testing team for 15-20 hours per week. In the hardware testing role, you will work closely with a small team conducting controlled scenario and real world testing of the radar sensor. The team is provided with a proposed test plan. You will gather the required equipment and conduct the outlined tests in an efficient manner. All observations and changes to the test plan must be clearly documented and communicated back to the engineering team. Following the conclusion of the testing, the collected data will be added to the companies’ database, where you will communicate the stored location to the rest of the team for analysis. Qualifications: • Pursuing a bachelor’s degree in engineering, computer science, related field, or relevant experience, • Excellent communication and time management skills, • Proficiency using Microsoft Office Suite and Microsoft SharePoint, • Strong documentation skills, • Ability and willingness to learn, • Ability to problem solve quickly, • Comfortable working in a fast paced environment, • Must be available Tuesday and Thursday 8AM-2PM, • The following experience and skills are considered a plus, • Linux command line interface, • MATLAB, Python or C++ scripting ability Powered by JazzHR pBJ0C2T00u

Job Description Summary: Working in coordination with the other members of the Center Leadership Team and under Direction of the Regional Medical Directors, the Center Medical Director shall deliver the highest quality healthcare in an efficient, affordable, and caring manner. The Center Medical Director drives daily center execution following the industrial athlete model, inspires colleague accountability to provide superb patient and employer experience, and is responsible for the assigned clinic’s daily medical functions. The Center Medical Director’s leadership combines broad vision with a critical eye for internal operations and quality assurance. The Center Medical Director contributes to the success of MBI’s business strategy by providing deep subject matter expertise as appropriate, ensuring medical operations are meeting key performance indicators, educating clinical staff, and helping drive business growth and retention at the Center level. Work Schedule: 4 days weekly, 8:00 AM to 5:00 PM Salary: $240,000 - $300,000 annually based on experience Job duties and qualifications listed below are in addition to the “Physician” job description. Patient Care/Customer Experience/Quality: • Delivers direct patient care both in clinic and via tele-medicine according to the established principles of clinical practice and the current organization plan or need., • Ensuring integrity of all clinical procedures, documentation, and the maintenance of up-to-date protocols, including risk management., • Ensures day-to-day execution of quality care, and customer and colleague satisfaction., • Ensures compliance with individual State Practice Act/Rules and Regulations/WC Regulations., • Utilizes Evidence Based Medicine with a focus on early intervention and patient empowerment/responsibility. Creates an appropriate treatment environment and ensures documentation and billing are clear, relevant, accurate, and thorough., • Works with Regional & State Medical Directors to manage clinical staffing, scheduling, and operations, in order to optimize patient outcomes while meeting key performance indicators., • Strives to execute Center goals to build customer loyalty. Serves as the primary contact point for Employers/Clients with questions regarding the medical care of the injured employee., • Responds quickly and professionally to requests of employer clients, including on site tours and educational presentations., • Supervises pre-employment testing program, including working with Sales and Clinic Administrator to facilitate new client set up process. Leadership/People Development: • Leader of the Medical Center, alongside the Center Administrator. Provides Center’s clinical and quality oversight. Identifies clinical improvement opportunities and works with clinical leadership to improve., • Leverages clinical guidance for resolving provider quality issues., • Attends and co-leads weekly Clinic Leadership Team “CLT” meetings., • Assesses strengths and developmental opportunities of medical providers. Provides access to training and incentive plan information (where applicable) to enhance colleague performance., • Fosters a “community of Practice” through peer-based learning and interaction with clinical colleagues., • Provides input into the design and implementation of educational programs for patients, employers, and medical staff., • Shapes the culture of the Medical Center. Consistently recognizes individual performance and encourages progression. Motivates and inspires team to higher levels of engagement, productivity, and personal achievement. Provides regular, timely guidance/feedback., • Building trust within the clinical team, leading by example; makes choices that are consistent with MBI ethical principles; is emotionally intelligent; manages self and relationships effectively., • Facilitates resolution of interpersonal and performance issues of medical providers at the Center., • Supervision: provides peer review of junior providers including periodic chart reviews and feedback sessions that focus on maintaining the highest standards of patient care, documentation, and accurate billing/coding., • Training of MA support staff’s clinical skills. Growth and Financial Analysis: • Builds relationships with new and existing clients. Provides onsite tours of the clinic and discusses the MBI model treatment model to gain trust and grow the client base., • Reviews Center financial performance and KPI’s with the CA to ensure optimal results and implement action plans, as needed., • Works with Regional and State Medical Directors regularly to understand all financial aspects of the clinic’s productivity (practice patterns, referrals, scheduling, patients per hour, P&L etc...)., • Ensures level of service/coding is being optimized for every visit and is supported by appropriate documentation Supervision: • Supervisory responsibility for all Physicians, APPs, Radiology Techs and Medical Assistants in the Center., • Supervision includes yearly written evaluations, assessment, definition, and/or modification of individual job duties of Physicians, Nurse Practitioners, and Physician Assistants, • Collaboration with CA for annual reviews of Medical Assistants and X-ray Technicians. Requirements: • MD/DO, • Occupational Medicine experience preferred, but we are willing to train otherwise qualified candidates with experience in UC, FP, IM, ER, Sports Medicine, or Ortho, • FMCSA certification for DOT exams, or ability to obtain within 60 days of hire., • Current state licensure in good standing (or in process), • Current DEA licensure, • Current BLS certificate, • Solid, demonstrated knowledge of the practice and application of occupational medicine. Working knowledge of laws and regulations governing rehabilitation services; of worker’s compensation and clinical procedures/processes; and of diagnoses and treatment of occupational injury and disease., • Working knowledge of medical office administration and procedures. Sound administration and management skills., • Ability to instruct, teach, and correct. Confident and professional demeanor with medical providers, administrators, and clients., • Board Certification in primary specialty: Occupational Med, Family Med, Internal Med, Emergency Med, PMR, Orthopedics (preferred, others will be considered), • MRO certification preferred, • Ability to perform treadmill stress tests, preferred.

Job Description Full Time Position/ Salary range $25-27 per hour, depending on years of experience We are currently seeking an experienced fire alarm technician to join our team! What we offer: · Excellent working environment · Employee focused company · Medical, Dental and Vision Insurance · Paid Vacation and Holidays · Company vehicle Position overview: Responsible for installation, programming, testing, and inspecting of fire alarm systems in compliance with fire codes. Key Responsibilities: · Run and terminate fire alarm wiring · Installation of fire control panels, detectors, pull stations, notification and ancillary equipment. · Documentation of installation and equipment used. · Conduct acceptance testing on new installations · Train building owners on system operation Required Qualifications: · High school diploma or equivalent · 2-5 yrs experience with fire alarm systems · Good communication skills · Valid Driver’s License/Clean driving record · Clean Pre-employment Background Check · Clean Pre-employment Drug Test Technical Skills: · Ability to read shop drawings · Basic electronics: parallel and series circuits · Basic computer skills for programming · Mechanical aptitude with knowledge of power tools · Understanding of addressable and conventional fire alarm systems Physical Requirements: · Ability to lift 50 lbs. · Comfortable working on ladders up to 12+ feet · Ability to work in attics, crawl spaces and mechanical rooms · Capable of standing, kneeling and bending for extended periods · Manual dexterity for terminating wires and small components. Company DescriptionCentral Alarm, Inc. founded in 1939, is locally owned and operated and is one of Southern Arizona’s leading Fire/Burglar Alarm companies.Central Alarm, Inc. founded in 1939, is locally owned and operated and is one of Southern Arizona’s leading Fire/Burglar Alarm companies.

Job Description Shuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. Employee Perks for a Diesel Mechanic are as follows... • Weekly Pay: $20 - $30/HR based on experience and qualifications, • Workplace flexibility, full-time schedule, consistent and year-round work, • Career advancement opportunities, • Holiday pay & vacation, • Company offers medical benefits and retirement plan options Essential Responsibilities The primary duty of the Bus Mechanic is to diagnose, repair, rebuild, and overhaul transit buses and related equipment, according to manuals and factory specifications, using hand and power tools. The Bus Mechanic must have knowledge of and understand how parts of the bus or coach must perform. Employees in this classification perform skilled mechanical tasks in preventive maintenance, troubleshooting and repair of diesel-powered vehicles and equipment. Specific Responsibilities • Read job orders, observe, and listen to vehicles in operation to determine malfunction., • Assist with preventive maintenance, safety inspections, and annual DOT maintenance inspections., • Diagnose and perform all phases of vehicle and equipment repair & replacement including brakes, suspensions, & drivetrains., • Apply lubrication, cooling, exhaust and air or hydraulic systems to vehicles as needed., • Inspect, adjust, replace vehicle equipment, assemblies, sub-assemblies, the HVAC system, air ride systems, steering systems, and brake system., • Enter work order data onto computer systems., • Maintain a clean and orderly work area., • Valid driver's license required; Willingness to obtain CDL while employed - We train!, • Minimum of 3 years of mechanical experience substituting 1 year of related technical training for a year of experience., • Ability to bring in personal tools., • Understand and carry out oral and written Instructions., • Experience with Detroit Diesel 6v92 & 50 series is a plus., • Carry, pull, and push up to 50 pounds of dead weight., • Climb up and down a ladder., • Sit, stand, stoop, kneel, squat, crouch, and/or crawl., • Medical, • Dental / Vision, • Long- and Short-Term Disability, • Life Insurance ($50,000 automatically awarded when you enroll for our medical plan), • 401K with a 3% company match, • ESOP (We are Employee Stock Owners), • Company-sponsored ASE testing and training materials (Valued at $186/certification), • Earn $100 for each ASE H series certification you receive, • In addition, you can receive $500 for completing all 8 H series certifications and become a "Master Transit Bus Technician", • $50 for every H series ASE recertifications you obtain, • We can cover your Class B Commercial Driver's License cost & help train Get to know us: Completecoach.com Sblbus.com Transitsales.com Zepsdrive.com DOT We are drug free workplace that conducts pre-employment physicals and drug screenings. We are regulated by the department of transportation and will be conducting random drug testing at regular intervals. EEO We are an equal opportunity employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. If you require a reasonable accommodation to a known disability, are a qualified applicant or employee and if it will not impose an “undue hardship” on the operation of the business, please notify a member of the Human Resources staff and a reasonable accommodation will be made. D/T Carson Enterprises, Inc. reserves the right to amend or alter this job description at any time at the discretion of the company. Company DescriptionShuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. D/T Carson Enterprises Inc. offers an array of solutions for transformational needs. Our company specializes in bus remanufacturing, interior rehabs, accident and fire repair, rail repair and rehab, and alternative fuel conversions.Shuttle Bus Leasing, a D/T Carson Enterprises, Inc. company is a bus leasing company offering its customers a range of customized leasing options. With over 1,000 buses in inventory, we can provide customers passenger buses that can transport anywhere from 15 to 120 passengers. D/T Carson Enterprises Inc. offers an array of solutions for transformational needs. Our company specializes in bus remanufacturing, interior rehabs, accident and fire repair, rail repair and rehab, and alternative fuel conversions.

Job Description We are consistently seeking talented Data Center Technicians for our facilities in Tucson, Miami, and New Kensington. Our Data Center Operations team plays a critical role in achieving our mission of resilient AI infrastructure at scale by setting up new equipment used by our amazing customer base to deploy the most advanced workloads on the planet. The ideal candidate will be highly adaptable, technically skilled, and ready to contribute to our mission in a fast-paced and dynamic environment. This is an evergreen requisition. We review applications on a rolling basis and will consider you for current openings across all of our sites, as well as future opportunities as we continue to scale. Responsibilities * Installation, configuration, and testing up of new data center infrastructure * Perform maintenance and upgrades ensuring high reliability and performance standards * Monitor system performance, troubleshoot issues, and implement solutions to maintain and enhance data center operations * Coordinate with local and remote teams to ensure smooth operations and timely completion of projects * Maintain meticulous records of installations, maintenance, and repairs, adhering to TensorWave's standards and protocols * Ensure compliance with safety, quality, and data center management best practices during all on-site activities * Provide on-site technical support and guidance during critical incidents or outages as part of an on-call rotation Required Experience * 2+ years of experience in data center operations, with direct experience in hardware installation, maintenance, and troubleshooting. * Strong understanding of data center infrastructure, including networking, servers, and storage systems. * Excellent problem-solving skills, with the ability to work independently in a fast-paced and dynamic environment. * Effective communication and collaboration skills, with a commitment to working as part of a national operations team. * Willingness and ability to travel as needed Preferred Experience * Bachelor’s degree in a technical field * Relevant technical certifications (e.g., CompTIA, Cisco) * Experience with GPUs * Experience with liquid cooling We’re looking for resilient, adaptable people to join our team—folks who enjoy collaborating and tackling tough challenges. We’re all about offering real opportunities for growth, letting you dive into complex problems and make a meaningful impact through creative solutions. If you're a driven contributor, we encourage you to explore opportunities to make an impact at Tensorwave. Join us as we redefine the possibilities of intelligent computing. What We Bring * Mission driven company * Competitive Salary * Stock Options * 100% paid Medical, Dental, and Vision insurance * Life and Voluntary Supplemental Insurance * Short Term Disability Insurance * Flexible Spending Account * 401(k) * Flexible PTO * Paid Holidays * Parental Leave * Mental Health Benefits through Spring Health Equal Employment Opportunity TensorWave is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of any protected status under applicable law. Reasonable Accommodations TensorWave provides reasonable accommodations in accordance with applicable laws. If you require accommodation during the hiring process, please contact . Employment Eligibility All offers of employment are contingent upon verification of identity and authorization to work in the United States, as required by law. Background Checks Where permitted by law, employment may be contingent upon the successful completion of a job-related background check. Data Privacy Notice By submitting an application, you acknowledge that TensorWave may collect, use, and retain your personal information for recruiting and employment-related purposes in accordance with applicable data privacy laws.

Job DescriptionDirector of ManufacturingOnsite Tucson, AZ Company Overview At World View, we strive to be a responsible technology leader in the collection, analysis, and delivery of actionable information gathered by our strategically placed arrays of persistent sensors in the stratosphere. We provide on-demand, scheduled, and historical aerial data and analytics from sensors deployed to the stratosphere with persistent coverage, higher resolution, and increased value over traditional aerial and space imagery sources. Job Description The Director of Manufacturing leads end-to-end manufacturing operations for World View’s stratospheric balloon systems, ensuring safe, compliant, repeatable and reliable production from raw materials through flight-ready assemblies. This role owns factory performance across safety, quality, delivery, and cost, and partners closely with Engineering, Quality, Supply Chain, Flight Operations, and Program teams to industrialize new designs, mature processes, and scale output. The Director of Manufacturing is accountable for production planning and execution, workforce leadership, continuous improvement, and operational readiness in a high-reliability aerospace environment. Role Responsibilities · Own day-to-day manufacturing execution for stratospheric balloon systems (envelopes, films/laminates, load-bearing structures, payload integration, ground support equipment), delivering to schedule with a strong safety-first mindset. · Lead and develop manufacturing leaders to build a culture of accountability, standard work, and continuous improvement. · Establish and manage production planning, capacity models, and master schedules; balance labor, equipment, and material constraints to meet program commitments. · Implement and maintain a robust Quality Management System (QMS) and inspection strategy (incoming, in-process, final), including nonconformance management, MRB, corrective/preventive actions (CAPA), and audit readiness. · Drive process discipline and repeatability through work instructions, travelers, tooling/fixture control, calibration programs, and configuration management for flight hardware. · Partner with Engineering to industrialize new designs (DFM/DFA), qualify processes and materials (film handling, seam and bond processes, leak testing), and manage smooth ECO/ECN implementation without disrupting production. · Own Risk reduction across the facility, including hazard assessments, training, incident investigations, and preventative actions for materials, equipment, and high-bay operations. · Develop and manage budgets for labor, equipment, tooling, facilities, and overhead; execute headcount plans, hiring, onboarding, training, and performance management for the manufacturing organization. · Build and maintain strong interfaces with Supply Chain and key suppliers; set requirements for critical materials (films, adhesives, valves, electronics), manage supplier quality, and mitigate risk for long-lead items. · Establish operating cadences and KPIs (SQDC, OEE, yield, scrap, on-time delivery); provide clear executive reporting on performance, risks, and improvement plans. Qualifications · Bachelor’s degree in Manufacturing Engineering, Mechanical/Aerospace Engineering, Industrial Engineering, or a related field; advanced degree a plus. · 10+ years of progressive manufacturing/operations experience, including 5+ years leading leaders/managers in a production environment. · Demonstrated success scaling production in a high-reliability environment (aerospace, defense, medical, automotive, or similar), improving safety, quality, delivery, and cost performance. · Strong knowledge of manufacturing systems and controls, including production planning, capacity management, standard work, and configuration control for flight hardware. · Experience building or operating under a QMS (e.g., ISO 9001/AS9100 concepts), including audits, CAPA, MRB, and disciplined document control. · Proven ability to recruit, develop, and retain high-performing manufacturing teams; effective coaching, labor planning, training systems, and organizational design. · Excellent communication skills with the ability to align cross-functional stakeholders (Engineering, Supply Chain, Quality, Flight Ops, Programs) and present operational tradeoffs and risks to executives. · Working knowledge of EHS and regulatory compliance in a manufacturing facility; experience implementing safety programs, training, and incident investigation practices. · Strong continuous improvement toolkit (Lean, Six Sigma, Theory of Constraints); ability to translate data into prioritised actions that improve throughput, yield, and cost. · Preferred: experience with softgoods/films/laminates manufacturing (cutting, layup, welding/heat sealing, bonding), large-scale assembly, and test/verification methods relevant to lighter-than-air or aerospace systems. What We Offer With a broad scope and real influence, you will have a front row seat to scaling the business and shaping how it operates. You will work side by side with experts in emerging technology, gaining exposure to cutting edge ideas and projects that are shaping the future. We offer a comprehensive benefits package including Medical, Dental, Vision, and Life Insurance because we believe in taking care of the you as a person, not just a team member. Our modern office is designed to keep you inspired and energized, with a fully stocked kitchen, on-site exercise area, and stunning views that make every day brighter! We believe in creating a dynamic and inclusive workplace where creativity thrives, and every voice is heard. Our commitment to all team members is built upon five core cultural pillars: Engage, Lean In, Create, Care, and Own. Together, these pillars form the foundation of our employee experience while adhering to the highest standards of ethical and sustainable practices. Some Final Notes The description gives you a sense of what the position involves, but is not an exhaustive list. We are a growing and evolving team, which means your responsibilities may shift or expand over time as new opportunities arise. Flexibility and curiosity are part of what make our work exciting! At World View, we are proud to be an equal opportunity employer. We celebrate belonging and diversity and are committed to creating an inclusive environment for all team members. We welcome applications from every background and life experience because we know our differences make us stronger. Work Authorization: Candidates must be authorized to work in the U.S. without company-sponsored immigration support, now or in the future. This position does not offer immigration sponsorship and the company will not seek export authorization. Eligible candidates include U.S. Citizens, U.S. Persons, or individuals with equivalent work authorization. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Summary: Responsible for performing welding and grinding functions per job specifications. Selects equipment and plans layout and assembly of welding. Works closely and interacts with supervision. Works with precise limits and standards of accuracy. TYPICAL RESPONSIBILITES AND DUTIES: • Actively supports the Company’s commitment to safety and its “Core Values.”, • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”, • Efficiently produce quality welds., • Perform or assist with fit‐up and preparation of welds., • Perform or assist with post weld cleanup, inspection, and repair., • Communicate regularly with the Field Foreman with regard to issues and concerns, • on the job site., • Comply with all Matrix safety policies and programs. Prior related experience and/or training in a fabrication environment must be able to pass the following weld tests. Carbon Steel Plate Test: • FCAW (Flux Core) – 2G, 3G, 4G, • SMAW E6010 (5P) 3G, Downhill, • Must obtain and maintain an active status within the drug testing program and pass background screening., • Must possess or be able to pass the Basic Safety Council Class Courses, • Must complete the Matrix Service Basic Safety training and site-specific training., • Must possess a valid TWIC card., • Site may require fire retardant clothing., • Maintain clean shaven and/or free of facial hair so that a respirator/face mask can seal properly. (Site Specific), • Must be willing to frequently travel/relocate., • Must have the ability to read, write and communicate effectively., • Must be able and willing to work at elevated heights from Ladders, scaffolding, aerial lifts, work platforms, etc., • Work will include pushing, pulling, lifting or carrying objects weighing up to 60 pounds, such as raw or fabricated material, equipment or tools. Heavy lifting will often be required to perform tasks., • Must be able to kneel, squat, and climb. Work will include frequent bending, kneeling, crouching and stooping and occasional climbing onto equipment and/or trailers. Work involves standing and/or walking for extended periods of time, up to a minimum of 8-10 hours per day, • Must be able to perform required duties for extended periods of time., • Must be able to perform tasks in hot and cold temperatures., • Competitive compensation package, • Medical, Dental and Vision Insurance, • 401k company match, • Life insurance, • Ongoing training, • Opportunity for advancement, • A diverse global organization and friendly team environment At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category

Job Description Melissa Owens| President P: (386)339-0839 |E: Schedule a Meeting: Job Description Job ID: 3515053 Job Title: Permanent Director Laboratory Location: Tucson, AZ 85745 Shift: Day shift Benefits: • Medical, Dental, Vision, • Healthcare & Dependent Care Tax-saving Accounts, • Supplemental Life Insurance and Accidental Death and Dismemberment (AD&D), • Disability Insurance (STD & LTD), • Accident Insurance, Critical Illness, Hospital Indemnity, and Long-term Care Insurance, • Legal Services, • Identity Protection, • 401(k) Retirement Savings Plan, • Commuter Savings Plan, • Auto and Home Insurance, • Pet Insurance, • Basic Life Insurance and AD&D, • Employee Assistance Program (EAP), • Employee Discount Program Job Summary: Responsible for the quality and quantity of work performed in all areas of Laboratory Services. Job Responsibilities Include: • Ensures laboratory practices focus on and guarantee patient safety., • Responsible for specimen collection and laboratory testing performed on all patients from neonates to geriatric patients. Responsible for technical development, implementation and integration within areas of technical expertise, to include instrument acquisition, logistic support and laboratory information systems integration., • Develops and manages the annual department operating and capital budgets, • Directs daily operations of department, • Has ability to hire, fire and discipline Requirements: Education - Bachelors degree in Medical Technology or related Health Science Specialty. Meets CLIA requirements for General Supervisor. Masters in Allied Health Specialty or Health Administration or Business. Experience - 5 years of progressive supervisory experience in an acute care facility. Lab Director experience. Certification/License - Registered or registry eligible in accordance with an approved certifying agency (ASCP, NCA, AMT or equivalent) Licensure, as required by State law.

Job DescriptionSalary: $22-$34 hourly DOE Job Summary Under the general direction of the Foreman (and Superintendent), the pipelayer has the general responsibility for assembling, connecting, and the installation of pipe systems for wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit). Responsibilities • Measure and mark pipes to required length for cutting and threading; cut, thread, hammer, and weld pipe to specifications using saws, pipe threaders, and benders; connect pipe pieces and seals joints, • Secure pipes to structures with clamps, brackets, and hangers, • Grout and clear manholes, • Inspect, examine, and test installed systems and pipe lines using pressure hydrostatic testing, observation, or other testing methods, • Locate existing pipes needing repair or replacement through potholing and/or excavation, • Tap and drill holes into pipes to introduce auxiliary line or devices, • Maintain a safe worksite and exhibit safe work practices by following company rules and OSHA regulations, including attendance at all required safety training programs, • Wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots, • Be able to performs a wide variety of manual labor tasks involving dexterous use of hand tools such as pneumatic, electric, and hand tools Requirements • High School diploma or equivalent education, • 2 years of work related experience in laying underground wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit), • Knowledge of materials, production processes, quality control, costs, and other techniques for maximizing the effective installation or repair of pipelines, • Work within special standard of accuracy, • Must have flexibility in personal schedule including weekday, overtime with occasional night and weekend work, • Strong focus on safety, quality, integrity, productivity, and teamwork, • OSHA, confined space, and related safety training a plus, • Ability to stand and exert physical effort performing manual labor most of the day, • Ability to lift up to 60 pounds regularly and up to 100 pounds occasionally, • Ability to work in confined spaces, • Ability to understand and follow plans, drawings, and directions (verbal and written), • Willingness to wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots, • Must be able to work safely outdoors in Arizona heat conditions and perform all job duties with no restrictions., • Knowledge of hand and power tools required to perform the duty of a pipelayer, • Knowledge or experience in underground dry and/or wet utility installation is a must, • Knowledge of street and highway traffic rules and regulations, and safety precautions to be observed in working on or near roads and highways, • Ability to detect unsafe or hazardous conditions of tools and work environment., • Thorough knowledge of safety standards and Underground Facilities Law (Blue Stake, Arizona 811), • Hold/obtain and maintain an OSHA 10 Certification, • Good communication skills and the ability to interact in a team environment, • Reliable transportation, • Bilingual English/Spanish a plus, • Ability to pass pre-employment and random drug tests Work Environment While performing the duties of this Job, the employee is regularly exposed to: • Wet and/or humid conditions, • Moving mechanical parts, • Precarious places and narrow spaces, • Fumes or airborne particles, • Outside weather conditions, • Extreme heat, • Frequent and/or sustained loud noises The employee is occasionally exposed to: • Toxic or caustic chemicals, • Risk of electrical shock, • Risk of vibration

Job Description Electronics Test Technician (Confidential Search) Location: Tucson, AZ (Onsite) Employment Type: Full Time, Non-Exempt / Hourly Search Conducted By: Leonard Workforce Solutions Leonard Workforce Solutions is conducting a confidential search on behalf of a growing organization seeking a qualified candidate for the following position. Our client is an established, employee-owned technology company headquartered in Tucson, AZ. They innovate, develop, and field advanced digital signal processing (DSP) products and services for the United States Department of Defense and Intelligence Community in support of national security missions. We are seeking an Electronics Test Technician to join a multi-disciplinary R&D environment alongside electrical engineers, mathematicians, computer scientists, and analysts who collectively build custom signal processing and geolocation solutions. This is a hands on bench role focused on testing and troubleshooting a highly diverse family of electronic assemblies including circuit card assemblies (CCAs) and chassis level systems. What You Will Do • Test, troubleshoot, repair, maintain, and install a wide variety of electronic, mechanical, computer, laboratory, and scientific systems and equipment, • Work directly from approved procedures, schematics, assembly drawings, and wiring diagrams, • Select, set up, and operate test equipment and configure it based on test specifications, • Troubleshoot electronic circuits to the component level and identify failure trends, • Help isolate problems between the test environment and the units under test and resolve them as needed, • Observe, analyze, and document test data and report results clearly to the engineering team, • Assist in the development of test procedures and supporting documentation, • Perform configuration and data management as required, • Move materials on and off testing platforms Required Qualifications • High School Diploma or AA / AS degree (or other 2 year post high school technical training), • Ability to work directly from approved procedures, schematics, assembly drawings, and wiring diagrams, • Demonstrated ability to troubleshoot electronic circuits to the component level and identify failure trends, • Comfortable selecting and configuring test equipment based on test specifications, • Strong communication skills around technical issues and test reports, • Ability to thrive in a fast paced repair, manufacturing, and production test environment, • Strong team orientation, • Working knowledge of computer architectures and data protocols for networking and interfacing with test equipment, • US CITIZENSHIP IS REQUIRED Preferred Qualifications • Associates Degree in Electronic Sciences, • Hands on experience with RF / Analog, High Voltage, and Digital electronic test equipment such as oscilloscopes, network analyzers, signal generators, spectrum analyzers, and power meters, • Familiarity with testing areas including insertion loss, VSWR, phase, gain, SFDR, SNR, and harmonics across S band, L band, and X band frequencies, • Experience inspecting CCAs to IPC 610A or equivalent, • Strong experience with desktop and technical software applications Why This Role • Established, employee owned organization with strong stability and mission alignment, • 100 percent employer paid family medical and dental insurance, employee life insurance, and short term and long term disability, • Flexible reimbursement spending accounts for medical and dependent care, • Immediate participation and vesting in the company's Employee Stock Ownership Plan (ESOP) and 401(k), • Employer contributions to ESOP, 401(k) match, and discretionary 401(k) contributions, • Cutting edge work supporting national security missions How to Apply Apply directly through ZipRecruiter. Qualified candidates will be contacted by Leonard Workforce Solutions to schedule an initial screening call.

Job DescriptionSalary: $20-$40 Kidtastics is Hiring Lifeguards! Looking for a job for the summer? Do you like being outdoors and love the water? We are hiring lifeguards for late spring and summer starting in late March. Our lifeguards travel to private events to lifeguard at; for example, birthday parties at homes or corporate event at a hotel. POSITION: LIFEGUARD Seasonal Contractual / Part-time NO BENEFITS HOURLY RATE: $25-$40 based off experience. CONTRACT PERIOD: March 2023 September 2023+ POSITION DUTIES:Lifeguards perform public safety work at private events. Lifeguards are responsible for protecting human life and maintaining order. The selected candidates will patrol and survey the swimming areas to prevent swimmers from endangering themselves and/or others. Work involves informing the public of the swimming rules and restrictions, rescuing swimmers in distress, searching for possible drowning victims, and administering first aid to the injured. Lifeguards generally work three to five-hour shifts, a majority of work is on the weekends. Also excepting applications for swim teachers as well. MINIMUM QUALIFICATIONS: Education:Applicants must posse currentcertification in Lifeguarding, First Aid, & CPR/AED for the Professional Rescuer. Experience:Previous lifeguarding is required along with a lifeguarding certification Notes: • Applicants must have a drivers license and/or reliable transportation Submit your resume by email . The email subject line must say: Lifeguard Applicant. Also excepting applications forswim teachers as well. Questions call480-648-8082. We will contact you via email if you meet our requirements. FIND OUT MORE ABOUT US: Job Types: Temporary, Contract, Part-time Pay: $25.00 - $40.00 per hour Benefits: • 4 hour shift, • CPR Certification (Required)

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Certerra is a consulting firm with over 65 years of quality service that offers professional services in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. Job Summary: We are looking to expand by hiring an enthusiastic full-time Office Manager to help perform the administrative functions. We are looking for an applicant who is a self-starter and has experience in a similar setting. This position is to be performed in office or from a remote work environment. The atmosphere is fast paced and deadline oriented with focus on safety and quality. Duties: • Support accounts payable and accounts receivable processes, • Assist with internal and external audits by providing documentation and schedules, • Prepare and maintain financial reports and spreadsheets as needed, • Support office manager in all company administrative tasks includig o Managing and tracking employee training o Assist with the recruitment process by identifying and screening candidates o Perform onboarding and offboarding tasks o Client vendor portal setup and management o Client invoicing and tracking o Employee payroll and expense reporting. This includes resolving discrepancies, answering questions, or updating records • Maintain records of financial transactions through bookkeeping, • Overseeing bank account transactions, • Perform other related duties and ad hoc projects as assigned Education/Qualifications: • Bachelor’s degree in accounting, Finance or related field preferred, • 1-3 years of relevant experience, • Proficiency in Microsoft Excel and accounting software (e.g. Quickbooks, NetSuite, SAP etc.), • Excellent attention to detail and organizational skills, • Strong analytical and problem-solving abilities, • Effective communication and interpersonal skills We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionDescription: Company Description: SynCardia Systems, LLC (“SynCardia”), based in Tucson, Arizona, is the global leader in total artificial heart technology for patients with end-stage heart failure. A wholly owned subsidiary of Picard Medical, Inc. Picard Medical is a publicly traded company listed on the NYSE American under the ticker symbol PMI. SynCardia develops, manufactures, and commercializes the SynCardia Total Artificial Heart (“STAH”), an implantable system that replaces the full function of a failing or failed human heart. The SynCardia Total Artificial Heart was the first artificial heart approved by both the FDA and Health Canada and remains the only commercially available artificial heart in the United States and Canada. With more than 2,100 implants performed at hospitals in 27 countries, it is the most widely used and extensively studied artificial heart in the world. For more information, please visit . Position Description: At SynCardia, we’re on a mission to transform lives with our life-saving total artificial heart technology. We’re looking for an energetic, hands-on Staff Accountant. In this role, you will play a key role in maintaining accurate financial records and supporting the Finance department through accounts payable processing, expense reconciliation, and general ledger maintenance. This position also contributes to system implementations and supports audits and financial reviews. If you are ready to make an impact and thrive in a fast-paced, mission-driven environment, we’d love to hear from you. Principal Responsibilities: • Contribute to the implementation of new ERP system, with primary focus on Procure-To-Pay process and system testing, • Keep Accounts Payable current; Disseminate for appropriate coding and approval for all payables received; Conduct 3-way match in vouchering invoices and enter A/P info into ERP system, • Update and present cashflow report at weekly senior management meeting for review and approval, • Process A/P every Friday; Run reports and print checks with accuracy, • Process Employee Expense Reports as policy dictates and do verification & reconciliation, • Assist Month end closing by preparing journal entries and completing important G/L accounts reconciliation and monthly financial statement variance review, • Assist with quarterly review and annual audit PBC list tasks, quarterly SEC Form 10-Q and annual Form 10-K prep, and annual inventory count, • Ad hoc projects and analysis: e.g. Help department managers and Purchasing do some trouble shooting on purchase order, vendor invoices and payment and variance tracking.Requirements: • General knowledge of accounting and accounting principles, • Experience with and skill in software applications, specifically Excel, Word and Outlook • Ability to work in a multi-task environment, • Ability to conduct eTective communication with both internal and external customers orally and in writing • Detailed-oriented, analytical thinker and problem solver Qualifications: • Bachelor's degree or equivalent, • 0-1 years working experience directly related to the duties and responsibilities specified or equivalent Work Environment: The role is oTice-based, with hybrid or remote options available depending on business needs. It requires flexibility to provide occasional after-hours support to address urgent shipment issues. The working environment involves moderate noise levels and may occasionally require lifting items weighing up to 30 pounds.

The Digital Marketing Specialist is crucial to the success of the Philanthropy and Alumni Engagement (PAE) team's high-volume digital communication program, supporting the build, testing, deployment and optimization of email programs and associated forms and landing pages within a marketing automati

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off Job Summary: The Traveling Electrical Site Supervisor will manage a commercial electrical project in New Mexico. They will manage other electricians to ensure they properly install, repair, and maintain electrical systems and they will conduct regular inspections to make sure that all required supplies, materials, and equipment are available and working as intended. This job includes housing, per diem, a company vehicle, and all standard company benefits! Upon completion of this project (2+ years) is the potential to manage a project in a different area. Essential Job Duties: (Included but not limited to) • Establish high-quality work practices that align with the mission of FMM, • Assist with the electrical work when needed, • Coordinate projects and maintain schedules to ensure crew members complete their work on time, • Produce and prepare sketches and layout drawings for projects, • Minimize errors and solve problems quickly, • Train new electricians or establish a team of crew members who facilitate training to new electricians, • Have complete understanding of electrical system installation in ground up commercial projects, • Can implement all aspects of a new construction commercial electrical build. Slab rough in, wall layout, installation of equipment/gear, power and lighting distribution, feeder pulls, trim out, trouble shooting, code compliance, best standard electrical practices, cost control, and crew managementRequired Skills and Qualifications:, • Must have a High School Diploma or equivalent apprenticeship., • Must adhere to safety protocol, and work in a drug-free environment., • Must have a minimum of five (5) years of experience in electrical work, • Must have knowledge of safety rules and regulations and learn client and company policy., • Ability to handle multiple projects and make decisions using FMM's core values of Quality, Teamwork, Pride, Passion, and Integrity, • Proficient in computer, text, and email skills, • Proficient in using power tools and electrical testing equipment., • Knowledge of the National Electrical Code (NEC), • Experience working with high voltage and low voltage systems., • Strong understanding of electrical principles and concepts, • Ability to build and install electrical systems in commercial and residential settings., • Familiarity with reading and interpreting electrical blueprints, schematics, and diagrams., • Ability to manage challenges and lead with confidence, • Proven leadership and organizational skills, • Exceptional communication skills, • Heavy Travel is requiredPhysical Requirements:, • Ability to pass a Fit for Duty Screening, • Ability to pass a drug and alcohol screening, • Ability to pass a motor vehicle report screening, • High noise environment, • Regularly exposed to moving mechanical parts and working around construction machinery, • Must be able to lift up to 50 lbs.Benefits, • Health Insurance-FMM will pay 50% of the employees premium, • 401K Contribution-FMM will match employee contribution up to 3%, • Optional voluntary benefits, • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Company Provided Health Club Membership, • Company Vehicle and Fuel Card, • Housing, • Per Diem

Job Description General Function Provide device repair technician support to store, utilizing technical problem solving skills, electronic cross-reference, and web research. Repair cell phones, tablets, light fixtures, and other devices. Provide customers total solutions to their battery, bulb, and services problems while doing so in a courteous, professional and helpful manner. Essential Responsibilities Device Repair / Technical ● Repair cell phones, tablets, and other devices based on priority ● Replace screens, batteries, and other components on smartphones and tablets ● Able to rebuild cordless drill batteries and other battery packs as needed ● Replace cords, sockets and other parts on lamps and light fixtures ● Assist with cycle count every week to reflect the accurate utilization of device repair inventory ● Rotate and stock inventory ● Follow all safety rules and regulations; wear proper Personal Protective Equipment (PPE) ● Cut keys and reprogram key fob remotes Customer Service / Sales ● Greet customers, determine needs and answer questions ● Suggest sell add-on items ● Directly communicates with customers about device repairs and status of repairs. ● Maintains problem resolution proficiency standards and customer satisfaction levels. Escalates situations to management when necessary ● Ask questions to identify potential commercial customers ● Operate computer/cash register to complete sales transactions with accuracy ● Watch for loss prevention issues and advise management of any unusual activities ● Demonstrate a customer-first mentality Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Qualifications ● High School education or equivalent required with relevant experience strongly preferred. Associates degree in electronics, or other technical degree preferred. ● 3-6 months of previous device repair experience. Demonstrated technical aptitude. ● Demonstrated problem solving skills. Duties require the ability of the use of judgment in minor decisions and use of some judgment as to the method of performance. ● Excellent organizational skills. Ability to work with relative independence on regular, routine duties, referring questionable situations to supervisor or others. ● Good listening and verbal communication skills with a customer focus; general knowledge of customer service policies/procedures ● Demonstrated attention to detail and ability to effectively manage and track multiple commitments; effectively prioritize, follow up, and meet deadlines. Physical Requirements / Work Environment The physical demands required to perform the essential responsibilities of this position are as follows. Reasonable accommodations, if necessary and/or as required by law, will be made available. ● This position requires the employee to regularly use hands to handle or touch electronic products, stand, walk, sit, frequently talk and hear; occasionally stoop, kneel, crouch, crawl, and reach above shoulders. Lifting 10-20# on a regular and frequent basis, 50# on an occasional basis, and more than 50# on an infrequent basis. ● While performing the responsibilities of this position, the employee will occasionally be exposed to fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions and the risk of electrical shock. The level of noise in the working environment is moderate. ● The position also requires the employee to regularly use electrical cables, simple hand tools, a magnifying glass, spot welders, automotive and electronic testing equipment, key cutting and programming equipment and a company automobile. ● Protective clothing and/or equipment used in this position includes safety glasses, goggles, gloves, and steel-toed shoes.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Job Overview: Indoor Air Quality Technician Green Home Solutions of Tucson Indoor air quality specializing in Mold, Disinfecting, Allergy and Odor treatments of homes or businesses. Responsible to provide treatment services for clients. These services will include: testing, cleaning, demolition of damage material, spraying of Green enzyme based products, minor repair in living areas, basements or attics. Responsibilities • Perform all testing, remediation and services per protocol, • Input information into system via smart phone for job completion. ., • Access smart phone for work schedule, • Focus on exceeding customer expectations for service., • Provide ongoing communication to customer on status and treatment protocol., • Recommend modifications or additions to treatment protocol if required., • May be responsible to drive company van to customer locations., • Fill out and provide job reportSkills, • Become familiar with indoor air quality treatments, • Follow Health and Safety guidelines for treatment protocols with proper PPE, • Adapt to work schedules and flexible shifts, • Excellent customer service, communication and self-management skills, • Drivers license in good standingPhysical requirements, • Perform lifting on a regular basis up to 50 pounds, • Work in small hot spaces i.e. attics and crawlspaces, • Perform stretching, bending, sitting, stooping, reaching, grasping and climbing ladders, • Wear a respirator along with other Personal Protective Equipment (PPE) during services providedDaily Requirements: Stop by shop in morning to pick up Job details and supplies Pull up job and call supervisor to get job details Send customer an en-route notification Click start job as soon as you arrive at job site Take remediation photos, make sure this includes: o Before photo o Photos during job o Photos at end of job Check in with updates before leaving job Put notes in data base about job Job Type: Full-time Expected hours: 40 per week Benefits: • Dental insurance, • Health insuranceSchedule:, • 8 hour shift, • Day shift, • Monday to Friday, • Overtime, • Paid HolidaysPeople with a criminal record are encouraged to apply Ability to Relocate: • Tucson, AZ: Relocate before starting work (Required)Work Location: On the road

Job DescriptionSalary: $17.00 - $20.00 per hour Medical Scribe Ophthalmology/Optometry (No Experience Necessary Training Program Provided) Start Your Career in Eye Care with Arizona Eye Consultants Have you dreamed of working in the medical field but werent sure where to begin? Do you enjoy helping others, working in a team environment, and staying organized? If so, a career as an Ophthalmic Scribe may be the perfect fit. At Arizona Eye Consultants, youll receive complete training to become an Ophthalmic Scribeone of the most in-demand roles in healthcare. This position offers opportunities for career growth, certification, and advancement into leadership or management tracks. About Us Founded in 2001 by Dr. Sean McCafferty, Arizona Eye Consultants is the largest and fastest-growing Ophthalmology/Optometry practice in Southern Arizona. • 16 providers across four Tucson locations, • Over 100 dedicated employees, • Specialties include glaucoma, cataracts, pediatric ophthalmology, and specialty contact lenses. We offer a competitive benefits package including: • Medical, dental, and vision insurance, • 401(k) retirement plan, • Paid time off (PTO) and holiday pay (for full-time employees), • Travel may be required between clinic locations., • This position is full-time, Monday-Friday, closed on weekends. Education & Experience • High school diploma required; some college preferred, • Experience in a professional, customer-focused environment Essential Skills • Strong communication and interpersonal skills, • Empathy and concern for patient needs, • Excellent organizational skills and attention to detail, • Ability to work effectively as part of a team, • Computer literacy and willingness to learn new systems Responsibilities Patient Interaction & Communication • Greet new patients and explain office procedures, • Inform patients about tests and how they may be affected, • Perform accurate documentation and assist with clinical measurements, including:, • Visual acuity and manual lensometry, • Visual fields, stereo testing, and motility evaluation, • Pupillary function tests, color vision, and applanation tonometry, • Refractometry, dilation of pupils, and contact lens evaluations, • Imaging and diagnostics (OCT, HRT, GDx, pachymetry, corneal topography), • Support physicians with additional tasks as needed Why Join Us? • Hands-on training providedno prior experience required., • Career growth opportunities with certification and advancement potential, • Be part of a team helping improve lives across Southern Arizona Apply today and start your career with some of the best providers in Tucson!

Job Description About Optima Optima Medical is an Arizona-based medical group consisting of 30 locations and over 130+ medical providers, who care for more than 200,000 patients statewide. Our mission is to improve the quality of life throughout Arizona by helping communities "Live Better, Live Longer" through personalized healthcare, with a focus on preventing the nation's top leading causes of death. We go beyond primary care with a full spectrum of services including cardiovascular health services, behavioral health, allergy testing and immunotherapy, in-house lab testing, imaging, chronic disease management, and other specialty health services. We aspire to aid the growth of our company by welcoming the most qualified and deserving candidates aboard. The ideal candidate will have experience in a fast-paced, patient-focused environment and a passion for delivering excellent service. Medical Assistant Job Responsibilities: • Record patient information such as vital signs, weight, and changes in medical history, • Clean and prepare exam rooms prior to/following patient appointments., • Able to perform various medical procedures such as EKG, PFT, Ear Lavage etc., • Administer injections and take blood draws., • At least 1 year of clinical work experience as a Medical Assistant, • At least 1 year of EMR experience; eClinicalWorks preferred., • High level of professionalism, • Excellent written and verbal communication skills, • Strong customer service skills, • Substantial growth opportunities, • Leadership and mentoring, • Resources to further career, • Fun work environment (events, holiday parties), • Benefits (medical/vision/dental/401k/paid holidays), • Supportive and positive work environment

Job Description Founded in 1956, the Jacuzzi® Brand has grown to become the modern-day Jacuzzi Group-- the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business unit of Jacuzzi Group with 12 successful locations launched nationwide in under 5 years. Jacuzzi Bath Remodel combines our premium materials, knowledgeable sales team, experienced in-house certified installers and over 60 years of proven excellence to deliver the highest standard of customer satisfaction. Jacuzzi Bath Remodel of Seattle is searching for a AZ ROC Licensed Journeyman Plumber in the Tucson, AZ area! The Licensed Journeyman Plumber is responsible for managing daily residential plumbing installation operations and activities. Our Plumbers help to drive installation revenue via strong leadership, high quality installations and excellent training of apprentice level Installers. Requirements for Licensed Journeyman Plumber: • Applicants MUST have a current Arizona ROC Journeyman Plumber's License (C-37)., • Plumber MUST have extensive RESIDENTIAL plumbing experience (minimum of 2 years), • Plumber will drive company vehicle (Must have clean DMV), • Leadership skills to manage a jobsite, • Able to effectively relate and communicate with all levels of employees and clients., • Must be dependable - must demonstrate thorough follow-up and responsiveness, • The Licensed Plumber will oversee the installation of bath and shower system fixtures per plumbing code, • Ability to complete a minimum of 3 plumbing installs per day, • Managing customer interactions during installation process while troubleshooting a service call via strong communication, efficiently identifying potential source of issue, addressing incorrect installs and proper testing and demonstration to client of repairs/alterations upon completion, • Pay: Competitive Hourly compensation $45.00 (DOE and licenses) overtime available, • This is a W2 employment opportunity candidates will qualify for; Medical, Vision, Dental, 401K matching, PTO and Holiday pay, • Flexible schedule, • Referral Bonuses, • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible schedule, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information General Description: The Special Projects Operator is responsible for producing rubber and composite products in accordance with prescribed procedures and schedules. This position reports to the Department Supervisor. Personal contact with others will typically involve interaction with technical and quality assurance personnel to give information on product related concerns. This position requires a person who is safety conscious, quality conscious and goal oriented. The Special Projects work environment requires the handling of hazardous chemicals, the physical ability to stand for extended periods with frequent stooping and bending and repeatedly lifting items weighing up to 50 pounds. Must be capable of wearing a cartridge loaded half face respirator. Schedule: Monday - Thursday 4:00pm-1:30am Fridays 2:30pm-11:30pm Primary Responsibilities: • Perform specific tasks associated with the manufacture of rubber and composite products, • Recognize product/process issues and assist with troubleshooting, • Maintain a clean and organized work area, • Support training of employees, • Enter job data into software data collection system, • Perform accurate counts of physical inventory, • Understand and follow safe work principles, • High School diploma or equivalent, • 1 year manufacturing experience required, • Required Skills, • Ability to complete production forms, such as product travelers, • Ability to follow work order instructions, • Ability to safely operate machines in area of assignment, • Sufficient visual acuity to inspect products produced, • Ability to read and understand technical drawings, work orders and written procedures, • Ability to accurately utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures, • Proficient in shop math, • Basic computer skills required, • Preferred experience with the manufacture of rubber and composite products:, • Compression and transfer molding, hand lay-up, rubber to metal bonding, composite to metal bonding, vacuum bag autoclave curing, pressure boot bonding and testing/inspection of product, • Perform specific tasks associated with the manufacture of rubber products, • Assigned by the Supervisor or Lead Person, • Execute manufacturing processes in accordance with work orders, procedures and schedules to achieve daily goals, • Operate processing equipment such as Autoclaves, die presses, rubber presses, lathes and & mechanical hand tools, • Utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures, • Accurately complete process control paperwork (raw material tracking on work orders), • Recognize product/process issues and assist with troubleshooting, • Know when to stop processing, • Notify supervisor/lead person, • Assist with the problem solving process to resolve the issue, • Maintain a clean and organized work area, • Utilize 6S techniques (Sort, Set in Order, Shine , Standardize, Sustain, Safety), • Participate in the daily workgroup start up meeting, • Responsible for maintaining a clean work area, • Capable of generating skill versatility sheets for products, • Cleanliness of work area/cell at all times, • Support the training of other employees, • As directed by the Supervisor and under close supervision & review of the Lead Person or Supervisor, • Provide training and familiarization on the work processes and the operation of equipment, • Completion of product training log sheets for employees being trained, • Enter job data into software data collection system, • Report material usage and labor when required, • Input data using a computer on a daily basis when required, • Perform accurate counts of physical inventory, • Identify low inventory levels of direct materials, • Identify low inventory levels of shop aids, • Notify lead/supervisor of needed direct and indirect materials, • Understand and follow safe work principles, • Practice safe work methods, • Wear personal protective equipment when required, • Support Supervisor/Lead Person in maintaining a safe work environment, • Capable of identifying safety issues with production equipment, • Responsible for quality and workmanship of product, • Perform visual/dimensional checks to ensure product quality and workmanship, • Identify and report product problems and issues, • Identify and report equipment problems and issues “AA/EOE/W/M/Vet/Disable” R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability.

Job Description This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information General Description: The Special Projects Operator is responsible for producing rubber and composite products in accordance with prescribed procedures and schedules. This position reports to the Department Supervisor. Personal contact with others will typically involve interaction with technical and quality assurance personnel to give information on product related concerns. This position requires a person who is safety conscious, quality conscious and goal oriented. The Special Projects work environment requires the handling of hazardous chemicals, the physical ability to stand for extended periods with frequent stooping and bending and repeatedly lifting items weighing up to 50 pounds. Must be capable of wearing a cartridge loaded half face respirator. Schedule: Monday - Thursday 6:00am-3:30pm Fridays 6:00am-2:30pm Primary Responsibilities: • Perform specific tasks associated with the manufacture of rubber and composite products, • Recognize product/process issues and assist with troubleshooting, • Maintain a clean and organized work area, • Support training of employees, • Enter job data into software data collection system, • Perform accurate counts of physical inventory, • Understand and follow safe work principles, • High School diploma or equivalent, • 1 year manufacturing experience required, • Required Skills, • Ability to complete production forms, such as product travelers, • Ability to follow work order instructions, • Ability to safely operate machines in area of assignment, • Sufficient visual acuity to inspect products produced, • Ability to read and understand technical drawings, work orders and written procedures, • Ability to accurately utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures, • Proficient in shop math, • Basic computer skills required, • Preferred experience with the manufacture of rubber and composite products:, • Compression and transfer molding, hand lay-up, rubber to metal bonding, composite to metal bonding, vacuum bag autoclave curing, pressure boot bonding and testing/inspection of product, • Perform specific tasks associated with the manufacture of rubber products, • Assigned by the Supervisor or Lead Person, • Execute manufacturing processes in accordance with work orders, procedures and schedules to achieve daily goals, • Operate processing equipment such as Autoclaves, die presses, rubber presses, lathes and & mechanical hand tools, • Utilize measuring equipment such as calipers, thickness gages, weigh scales, and tape measures, • Accurately complete process control paperwork (raw material tracking on work orders), • Recognize product/process issues and assist with troubleshooting, • Know when to stop processing, • Notify supervisor/lead person, • Assist with the problem solving process to resolve the issue, • Maintain a clean and organized work area, • Utilize 6S techniques (Sort, Set in Order, Shine , Standardize, Sustain, Safety), • Participate in the daily workgroup start up meeting, • Responsible for maintaining a clean work area, • Capable of generating skill versatility sheets for products, • Cleanliness of work area/cell at all times, • Support the training of other employees, • As directed by the Supervisor and under close supervision & review of the Lead Person or Supervisor, • Provide training and familiarization on the work processes and the operation of equipment, • Completion of product training log sheets for employees being trained, • Enter job data into software data collection system, • Report material usage and labor when required, • Input data using a computer on a daily basis when required, • Perform accurate counts of physical inventory, • Identify low inventory levels of direct materials, • Identify low inventory levels of shop aids, • Notify lead/supervisor of needed direct and indirect materials, • Understand and follow safe work principles, • Practice safe work methods, • Wear personal protective equipment when required, • Support Supervisor/Lead Person in maintaining a safe work environment, • Capable of identifying safety issues with production equipment, • Responsible for quality and workmanship of product, • Perform visual/dimensional checks to ensure product quality and workmanship, • Identify and report product problems and issues, • Identify and report equipment problems and issues “AA/EOE/W/M/Vet/Disable” R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as protected veteran, among other things, or status as qualified individual with disability.

Job DescriptionWhy You’ll Love This Aviation Guest Services Coordinator JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment around some of the most incredible professionals in aviation? If so, this Guest Services Coordinator position with Atlantic Aviation at TUS in Tucson, AZ may be perfect for you! Pay: $15.50 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will be the first point of contact for clientele arriving at the facility. You will get the opportunity to interact with many large corporations’ flight departments and high-profile clients! In this position, you will perform assigned tasks related to providing services for corporate aircraft, cargo and passenger charters, and other general aviation aircraft. Use your experience and outgoing personality to build a career in aviation you are excited about and apply for the Guest Services Coordinator job today! ResponsibilitiesGuest Services Coordinator Responsibilities • Provide customers with professional service and assistance, • Making hotel and catering reservations for inbound and outbound aircraft, • Processing customer purchases and fuel transactions, • Work closely with line service personnel and pilots, ensuring all customer service needs are met, • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsGuest Services Coordinator Qualifications, • Customer service/hospitality experience, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Ability to comprehend and perform basic math calculationsWe maintain a drug-free workplace and perform pre-employment substance testing.