Trabajos tooling en Perth Amboy, New JerseyCrear alertas

About CLS: \n CLS is the trusted party at the centre of the global FX ecosystem. Utilized by thousands of counterparties, CLS makes FX safer, smoother and more cost effective. Trillions of dollars’ worth of currency flows through our systems each day. \n Created by the market for the market, our unrivalled global settlement infrastructure reduces systemic risk and provides standardization for participants in many of the world’s most actively traded currencies. We deliver huge efficiencies and savings for our clients: in fact, our approach to multilateral netting shrinks funding requirements by over 96% on average, so clients can put their capital and resources to better use. \n CLS products are designed to enable clients to manage risk most effectively across the full FX lifecycle – whether through more efficient processing tools or market intelligence derived from the largest single source of FX executed data available to the market. \n \n \n Job Information: \n\n • Functional Title: Cyber Hygiene and Metrics Engineer\n, • Department: CISO\n, • Corporate Level: Vice President\n, • Reports To: Cyber Hygiene and Metrics Engineering Lead\n, • Location: Iselin, NJ. On-site 2 days per week\n, • Expected full-time salary range between $165,000 - $185,000 + variable compensation + 401(k) match + benefits.\n, • Note: Disclosure as required by NY Pay Transparency Law of the expected salary compensation range for this role.\n\n \n What you will be doing: \n We are seeking a highly skilled Security Data Analytics & Metrics Engineer to architect, engineer, and operate a strategic security analytics platform on AWS from the ground up. The successful candidate will design and build a modular security data architecture that ingests telemetry from security, cloud, infrastructure, identity, and risk management platforms to deliver executive-level metrics, operational insights, regulatory reporting, and continuous control assurance. The platform follows a modern federated architecture built around a Security Data Lake, analytics services, exposure management, and executive reporting capabilities rather than reliance on a traditional monolithic SIEM model. \n The role combines data engineering, cloud architecture, analytics engineering, and security domain expertise to create a trusted source of security performance data for technology leadership, regulators, auditors, and the Board. \n \n Key Responsibilities: \n Architecture & Engineering \n\n • Design and implement a cloud-based security analytics platform on AWS.\n, • Architect data pipelines that ingest, normalize, enrich, and correlate telemetry from multiple security and technology platforms.\n, • Build and operate a Security Data Lake leveraging AWS-native services and open data standards.\n, • Define scalable data models supporting operational metrics, risk analytics, compliance reporting, and executive dashboards.\n, • Implement data governance controls, metadata management, lineage tracking, and quality assurance frameworks.\n\n \n Data Platform Development \n\n • Develop real-time and batch data pipelines using AWS services including S3, Glue, Lambda, Athena, EMR, Redshift, Kinesis, and EventBridge.\n, • Engineer integrations with:\n, • SIEM platforms\n, • IAM systems\n, • Cloud Security Posture Management (CSPM)\n, • Endpoint Protection Platforms (EPP)\n, • Threat Intelligence platforms\n, • Exposure Management solutions\n, • Implement common data schemas and normalization standards, including OCSF where appropriate.\n, • Build reusable APIs and data products enabling self-service analytics.\n\n \n Metrics Engineering & Analytics \n\n • Define and maintain enterprise security KPIs, KRIs, PLAs, and performance metrics.\n, • Build metric calculation frameworks covering:\n, • Incident management\n, • Mean Time to Respond (MTTR)\n, • Mean Time to Neutralize (MTTN)\n, • Security control effectiveness\n, • Vulnerability remediation\n, • Identity governance\n, • Cloud security posture\n, • Regulatory compliance\n, • Create automated executive scorecards and Board-level reporting views.\n, • Develop analytical models to identify trends, risks, control gaps, and performance opportunities.\n\n \n Executive Reporting & Visualisation \n\n • Design and deliver enterprise dashboards using Power BI and AWS analytics tooling.\n, • Translate technical security data into meaningful business outcomes and risk indicators.\n, • Create reporting capabilities aligned to regulatory and operational requirements.\n, • Partner with CISO, CRO, Internal Audit, and Technology leadership teams to define reporting needs.\n\n \n DevOps & Platform Reliability \n\n • Implement Infrastructure as Code using Terraform and AWS-native automation.\n, • Establish CI/CD pipelines for analytics assets, dashboards, metrics, and data pipelines.\n, • Monitor platform health, performance, cost, and reliability.\n, • Drive cost optimisation by balancing Security Lake retention, analytics workloads, and SIEM indexing strategies.\n\n \n Required Experience: \n\n • 7+ years of experience in data engineering, analytics engineering, and cloud platform engineering.\n, • 3+ years designing and operating AWS-based data platforms.\n, • Strong experience with:\n, • AWS Security Lake\n, • Amazon S3\n, • AWS Glue\n, • Athena\n, • Lambda\n, • Redshift\n, • Kinesis\n, • CloudWatch\n, • Experience building large-scale data lakes and analytics platforms.\n, • Strong SQL and Python development skills.\n, • Experience with dashboard and visualization technologies such as Power BI.\n, • Experience integrating cybersecurity and risk management datasets.\n, • Understanding of security operations, security controls, vulnerability management, IAM, and cloud security.\n\n \n Desirable Experience: \n\n • Financial services or banking experience.\n, • Experience implementing OCSF or other security telemetry standards.\n, • Exposure to SIEM platform Splunk.\n, • Exposure management or cyber performance management platforms.\n, • Experience with machine learning, AI-assisted analytics, and risk scoring.\n\n \n Key Deliverables: \n The successful candidate will build and maintain: \n\n • Enterprise Security Data Lake on AWS.\n, • Unified security metrics repository.\n, • Executive security performance dashboard suite.\n, • Board and regulatory reporting capability.\n, • Exposure management analytics models.\n, • Continuous control assurance metrics framework.\n, • Automated KPI and KRI reporting pipelines.\n, • Security analytics APIs and self-service data products.\n\n \n Success Measures: \n\n • Establish a consolidated security data platform serving executive, operational, and regulatory reporting needs.\n, • Deliver trusted, near real-time security metrics across all control domains.\n, • Reduce manual reporting effort through automation and self-service analytics.\n, • Improve visibility of cyber risk, control effectiveness, and remediation performance.\n, • Enable data-driven security investment and risk management decisions.\n\n \n Our commitment to employees: \n We are a small company with a big mandate, so every person is essential to our success. We are also committed to employing and retaining the most talented and dedicated people. \n What makes us interesting goes beyond our competitive salaries and great benefits. Our work environment is designed around quality outcomes, not output. The FX market would cease to function without our services, and we take pride in being responsible for keeping it running smoothly. \n We are different from other financial institutions in that we have a flatter and more transparent structure, with accessible leadership. You will be seen, heard and empowered to develop your career. \n We are a purpose-driven organization, with an inclusive culture that focuses on doing what is right. The well-being of our people is as important to us as the resilience of our systems. In addition to encouraging our people to ‘locate for their day,’ we run a range of initiatives that support a sense of belonging, as well as physical, emotional and mental well-being. \n \n Our extensive benefits for employees typically include: \n\n • Vacation/annual leave: 25 days in UK/Asia + 3 life days, 23 in US + 3 life days\n, • Private medical and dental cover and life insurance\n, • Generous pension contributions in the UK and Asia; matching 401(k) in the US\n, • Paid volunteer days\n, • ‘Locate for your day’ hybrid working - 2 days a week in office\n, • Access to Discover – our learning platform with 1000+ courses from LinkedIn Learning\n, • Paid parental leave / Coaching and support services\n, • Career development / LinkedIn Learning\n, • ‘Heads down days’ with no meetings on the last Friday of every month\n, • Wellbeing / Mental health support\n, • Employee Networks (Black Employee Network, Parents & Caregivers Network, Pride Network, Sustainability Network, Veterans Network, Women’s Forum)\n, • Social events\n\n \n Awards: \n\n • The Sunday Times Best Places to Work 2023, 2024, 2025 / Big Company / The Sunday Times Awards\n, • Third place in Britain’s Healthiest Workplace 2022 / Medium Company / Vitality Awards\n\n

Role overview: • Job title – Director, Data Security, • Department – Attack Surface Management (Cyber Hygiene and Data), • Level – Director, • Reports to – Managing Director, CISO US Services, • Location – New Jersey, • Compensation – $225,000 - 235,000 base salary + variable compensation + 401(k) match + benefits Director, Data Security What you will be doing: • Establish, build, and lead the new Data Security team, ensuring it has an effective operating model, processes, roles, and responsibilities., • Identify data security trends, risks and threats and work directly with IT security and wider business leaders to address these., • Direct the development and continuous improvement of the overall data security strategy and framework within CLS, including defining the strategic direction for (non-exhaustive list):, • Data Loss Prevention,, • Data-at-Rest / In-transit controls,, • E-mail security,, • Masking & Tokenization,, • Data Discovery and Classification,, • Secrets Scanning & Management, and, • Third Party Data Management., • Work closely with operational support teams with regards to the operation and implementation of the above strategic priorities., • Work closely with Security Architecture with regards architecture, design and engineering of Data Security services and solutions., • Establish and supporting governance, processes, and policies to protect CLS critical information & assets., • Oversee the implementation and management of enterprise data protection controls to include supporting the development of key metrics., • Oversee the support of data training programes, liaising with the Training and Awareness team to educate staff on data security policies, best practices, and tooling to promote secure data handling behaviors and minimize risks., • Liaise extensively with required internal stakeholders and Third Party vendors, with direct responsibility for the management of specific vendors providing services to Data Security. What we’re looking for: A security leader who can: • Lead the Data Security team, driving innovation and ensuring the team has a clear understanding of its roles and responsibilities, and how they contribute and align to CLS’s overall IT Security Function., • Liaise closely with CLS stakeholders e.g. Wider IT security Teams, Legal, Privacy / Data Protection etc., • Demonstrate experience in complementary tools and solutions to secure enterprise-wide data security within CLS., • Identify Data Security priorities to establish and strengthen a robust security team, by focusing efforts on tailoring work and programs for CLS specific needs., • Work with and have experience of managing relationships with key third party suppliers in support of data security priorities Professional qualifications / certifications • Experience in data security or information security (12 – 15 years), including ~8-10 years in a leadership or management role overseeing data security functions., • Experience in:, • Leading team adherence to operational and compliance standards within highly regulated environments., • Reporting on team performance and project progress to senior management, translating technical insights., • Representing the team in governance forums or committees, providing expert input and driving outcomes., • Understand, interpret and apply regulatory requirements, compliance and industry standards as pertains to Data Security.

Overview The Product Engineer I supports the design, launch, and ongoing improvement of new and existing products in a manufacturing environment. This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. Working closely with manufacturing teams, customers, vendors, and suppliers, the Product Engineer I troubleshoots production issues, supports equipment and process qualification and validation, develops customized solutions, identifies cost-saving and reliability improvements, and delivers projects on time and within budget. Essential Functions • Manage engineering changes for new and existing products; communicate changes to all levels of manufacturing teams as well as suppliers accordingly, • Ensure the manufacturability of new and existing products by participating in the product design and stage gate development process in the early stages of product development, • Identify and implement programs to improve the manufacturability and reliability of products, • Support production lines to minimize or eliminate downtime, • Provide support for the maintenance of items and Bills of Material (BOM) in MRP system., • Create and review assembly drawings for existing and new products, • Determine parts and tools needed in order to achieve manufacturing goals according to product specifications, • Prepare and maintain parts guide for your product line to provide technical support for customers, sales, customer service and Humanscale field technicians for new and existing products, • Identify opportunities for cost reductions and coordinate initiatives to achieve savings in a timely manner, • Plan and accomplish projects & goals on time and within budget, • Support the installation, qualification, verification, and validation of new and existing equipment and processes, • Coordinate with vendors and suppliers regarding technical specifications and alternatives, including the procurement of material and components, • Generate specification control drawings as a means of communication with vendors and suppliers, • Resolve technical, procedural and logistical problems in manufacturing by using proper troubleshooting and failure analysis techniques, • Design customized prototypes and final functional units to satisfy customer Special Order Requests (SOR), • Any other duties as assigned Qualifications • Bachelor's or Master's degree in Mechanical Engineering or similar discipline, • 0 to 2 years of engineering experience, including relevant internships, co-ops, or hands-on academic product development projects., • Internship experience working in an Engineering capacity at a manufacturing facility, • Knowledge of engineering principles, practices and techniques commonly employed in the design and production of products, • Excellent organizational, analytical, and interpersonal skills, • Excellent verbal and written communication skills with the ability to communicate engineering concepts to non-engineers, • Understanding of Lean Manufacturing concepts, techniques and tools, • Understanding of and experience working with machines & mechanical systems, • Must be able to work in a team environment, helping others when necessary, • Bilingual in Spanish and English preferred PHYSICAL REQUIREMENTS • Ability to exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, • Must be able to do repetitive bending and stretching, • Ability to lift 60 pounds, • Ability to be onsite 5 days a week, • Ability to move about the Production floor frequently and occasionally stoop, kneel, or crouch, • Ability to use hands to operate tools, install, adjust and attach parts, • Visual acuity for tasks that require attention to detail, such as operating machinery or performing quality control COMPUTER SKILLS • Good understanding of GD&T for assembly and part drawings, • Experience in using 3D CAD modeling software (i.e., Solidworks), • Experience with MRP systems such as INFOR is preferred, • Strong MSOffice and other computer skills Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. Salary Range: $71,434 - $104,194 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

Our client, a well-established leader in industrial manufacturing solutions, is seeking a Technical Sales Representative with strong cutting tool and metal cutting experience to drive growth across distribution channels and end-user accounts. This role is ideal for a sales professional with hands-on chip making knowledge who understands machining processes at a technical level and can confidently consult with manufacturing engineers, machinists, production managers, and procurement teams. Position Overview: The Technical Sales Representative will be responsible for growing revenue within an assigned territory by promoting high-performance cutting tools, carbide inserts, indexable tooling, solid carbide end mills, drills, reamers, and metal removal solutions. The successful candidate will combine industrial sales expertise with a deep understanding of CNC machining, feeds and speeds optimization, tool geometry, carbide grades, coatings, and metal cutting applications. This is a consultative, solution-based sales role focused on supporting both industrial distributors and end-user manufacturing facilities, including job shops, production machining environments, and OEM manufacturers. Key Responsibilities: • Drive territory sales growth of cutting tools and metal cutting solutions through both distribution partners and direct end users, • Provide technical application support on CNC milling, turning, drilling, and chip making operations, • Advise customers on proper feeds and speeds, tooling geometry selection, carbide grades, coatings, tool life optimization, and cycle time reduction, • Conduct onsite visits to evaluate machining processes and recommend productivity improvements, • Collaborate with manufacturing engineers and machinists to improve surface finish, tool performance, and cost per part, • Develop strong relationships with industrial distributors while expanding penetration within end-user accounts, • Identify opportunities for process improvement, tooling standardization, and metal removal efficiency, • Support new product introductions and promote advanced tooling technologies Qualifications: • Proven experience in cutting tool sales, industrial tooling sales, or metalworking sales, • Strong technical understanding of chip making processes, CNC machining, feeds and speeds calculations, tool geometry, and carbide grades, • Experience calling on industrial distribution networks and end-user manufacturing accounts, • Knowledge of metal removal applications including milling, turning, drilling, tapping, and boring, • Ability to communicate effectively with machinists, programmers, production supervisors, and engineering teams, • Demonstrated success in territory management, account development, and consultative technical sales What We’re Looking For: We are seeking a driven sales professional who can bridge the gap between technical machining knowledge and revenue growth. The ideal candidate understands how cutting tool performance impacts throughput, scrap reduction, machine utilization, and overall manufacturing productivity. If you have a background in industrial sales, machining, metal cutting, carbide tooling, or CNC applications engineering and are ready to leverage that expertise into a high-impact technical sales role, we want to hear from you.

Role overview: • Job title – Application Security Specialist, • Department – IT Security, • Level – Vice President, • Reports to – Director, Application Security, • Location – New Jersey, • Compensation – $140,000–$180,000 base salary + variable compensation + 401(k) match + benefits We’re hiring an Application Security Specialist to help development teams build secure, resilient software. This is a hands-on AppSec role for someone who can interpret security findings, understand real-world application risk, and turn that insight into practical guidance for engineers. This is not a DevSecOps tooling integration role: engineering teams own security tool integration, automation, and pipeline operation. Your focus will be on understanding the output of those tools, separating meaningful risk from noise, and partnering with developers to improve the security of the code we write. What you’ll do: • Analyze and validate findings from SAST, DAST, SCA, API security testing, AI-assisted analysis, penetration testing, and code reviews., • Assess vulnerabilities in context, considering exploitability, business impact, compensating controls, and realistic application risk., • Work closely with development teams to explain issues clearly, prioritize remediation, and support secure implementation choices., • Lead or facilitate threat modelling, secure design reviews, and architecture risk reviews for new features, services, APIs, and platforms., • Promote secure coding standards, reusable security patterns, and practical guidance that reduce recurring vulnerability themes., • Provide AppSec subject-matter expertise to improve security testing, reporting, and SDLC processes without owning pipeline integration or tool administration. What you’ll bring: • Strong experience in application security, secure coding, secure-by-design practices, application security testing, and vulnerability management., • Solid understanding of common application and API vulnerability classes, including the OWASP Top 10, and how to remediate them in modern software environments., • Ability to read and reason about code well enough to validate findings, identify root causes, and discuss remediation options with developers., • Experience with threat modelling, architecture risk reviews, secure design reviews, or similar AppSec activities., • Practical knowledge of SAST, DAST, SCA, API security, secrets detection, and related testing approaches, with an emphasis on interpreting results rather than administering tools., • Working knowledge of at least one programming language such as Java, Python, JavaScript, C#, or Go., • Clear communication skills and the ability to translate security risk into practical guidance for engineering, product, and technology leadership audiences., • Collaborative mindset, sound risk judgement, and a coaching style that helps development teams improve their security capability over time. Qualifications: • Degree in a technology discipline such as Computer Science, Information Management, Computer Engineering, Cybersecurity, or equivalent practical experience., • Relevant security certifications such as CISSP, CSSLP, GWAPT, GWEB, or equivalent are preferred but not required.

Overview GEP is a global leader in procurement and supply chain transformation. We help enterprises harness the power of AI and digital technology to stay ahead in the new economy. Through AI-driven solutions, we enable businesses to operate with greater efficiency and effectiveness, gain a competitive advantage, and maximize business and shareholder value. We partner with Fortune 500 and Global 2000 enterprises across industries to build high-performing, resilient and sustainable supply chains. We’re always looking for talented people who can help us grow, continually improve and make a difference. At GEP, we’re building a beautiful company, enjoying the journey and creating lasting impact for our clients, our communities and one another. What You Will Do We're building GEP's Distributed Intelligent Data Layer, a semantic platform for procurement running on custom technical stack. We're looking for a Product Ontology Designer who will define the product and procurement ontology that everything else is built on: the classes, relationships, taxonomies and rules that model products, categories, suppliers and spend. You'll translate procurement domain knowledge into rigorous RDF/OWL models, validate them against both query surfaces (SPARQL and Cypher), align them to industry standards, and set the governance that keeps the ontology consistent as it scales across tenants. • Design the product/procurement ontology: Model classes, properties, relationships and taxonomies for products, categories, suppliers and spend using RDF, OWL and SKOS., • Author validation & inference rules: Define SHACL constraints and reasoning rules that keep data correct and enable inference (later materialized via OWL-RL)., • Align to standards: Map and reconcile against procurement standards and client schemes (UNSPSC, eClass, GS1), resolving overlaps and gaps., • Ground the model in real data: Partner with domain SMEs and data engineers to validate the ontology against real catalog and spend data and query patterns, on both SPARQL and Cypher., • Own governance: Establish versioning, change control, naming conventions and documentation so the ontology stays coherent as it grows., • Enable the annotators: Write and maintain the data-cleaning and annotation guidelines that annotators apply when mapping records and relationships to the ontology, and adjudicate the hard classification cases. What You Should Bring • Education: Degree in Computer Science, Information/Library Science, Linguistics, or a related field (advanced degree a plus)., • Experience: 3+ years building ontologies, taxonomies or knowledge models in production, ideally over product, catalog or master data. Equivalent domains are welcome; we care about the modeling skill., • Ontology and taxonomy modeling skills: RDF, OWL and SKOS., • Constraints and reasoning skills: SHACL, and familiarity with rule-based inference (OWL-RL / SWRL)., • Ontology tooling skills: Protégé, TopBraid, PoolParty or comparable., • SPARQL (and ideally Cypher/openCypher) for validating and querying models against real data., • Domain grounding in procurement, product catalog, spend classification or master data, or the ability to ramp on it quickly., • Mindset: Rigor, conceptual clarity, and a drive to build a model that stays clean under real-world messiness., • Collaboration: Strong communication skills and comfort translating between domain SMEs and engineers in a hybrid, agile team. Nice to have (any of these makes you stand out): • Procurement / product standards: UNSPSC, eClass, GS1., • Entity resolution and data-quality practices., • Working with Oxigraph, Apache AGE, or comparable triple stores (Apache Jena, GraphDB) directly., • Defining data-cleaning / annotation guidelines and working with data curators. This is a hybrid role with 3 days on-site in GEP’s Clark, NJ Headquarters. Salary Range: $125,000 – $170,000 annually, based on experience and qualifications. Additional Compensation: Eligible for a performance-based bonus tied to individual and company performance. Benefits: Comprehensive medical, dental, and vision coverage, 401(k) with a 3% company match, paid time off, company holidays, and professional development opportunities.

About CLS: CLS is the trusted party at the centre of the global FX ecosystem. Utilized by thousands of counterparties, CLS makes FX safer, smoother and more cost effective. Trillions of dollars’ worth of currency flows through our systems each day. Created by the market for the market, our unrivalled global settlement infrastructure reduces systemic risk and provides standardization for participants in many of the world’s most actively traded currencies. We deliver huge efficiencies and savings for our clients: in fact, our approach to multilateral netting shrinks funding requirements by over 96% on average, so clients can put their capital and resources to better use. CLS products are designed to enable clients to manage risk most effectively across the full FX lifecycle – whether through more efficient processing tools or market intelligence derived from the largest single source of FX executed data available to the market. Job information: • Functional title – IAM Engineering Lead, • Department - CISO, • Corporate level - Director, • Report to – Head of Security Architecture, Design and Engineering, • Location – Iselin, New Jersey. On site 2 days per week, • Expected full-time salary range between $200,000 - $230,000 + variable compensation + 401(k) match + benefits. Note: Disclosure as required by NY Pay Transparency Law of the expected salary compensation range for this role. What you will be doing: As Head of IAM Engineering, you will lead the strategic design, implementation, and governance of a comprehensive identity and access management program that protects CLS Services' most critical asset: trusted digital identity. This is a hybrid executive and technical role that bridges security, compliance, and business enablement in a highly regulated financial services environment. You will be responsible for architecting and scaling identity systems across our workforce, customers, and machine identities—each with distinct risk profiles and regulatory demands. This includes accelerating onboarding of applications and infrastructure into our IGA platform, expanding our PAM scope to network devices and non-traditional endpoints, building a comprehensive secrets management capability, and embedding AI-assisted automation to reduce manual operational burden while maintaining security and auditability. Key Responsibilities: • Scale application and infrastructure onboarding to IAG through a phased, iterative deployment strategy, prioritizing critical systems and expanding coverage over time to maximize early wins while managing complexity., • Automate provisioning and access reviews using IAG connectors, role-based access control (RBAC) frameworks, and AI-driven workflows to reduce manual errors and accelerate user lifecycle management., • Implement self-service capabilities and identity workflow automation to automate and accelerate onboarding to the IAG platform., • Maintain data quality and integration governance by establishing rigorous data cleansing practices, continuous syncing with authoritative HR systems, and monitoring to ensure accurate, consistent identity and entitlement data., • Where possible Leverage AI and machine learning to generate role recommendations, detect over-permissioning, and automate access certification workflows at scale., • Govern machine identities (workloads, services, future AI agents) through IAG lifecycle management, ensuring all identity types are managed through a unified access governance framework., • Deploy behavioral anomaly detection using AI/ML to identify unauthorized or suspicious IAM activities, including potential abuse by rogue AI agents operating at machine velocity., • Onboard critical device and infrastructure accounts to PAM, including network devices, databases, and cloud infrastructure, implementing just-enough-privilege (JEP) and just-in-time (JIT) access models to reduce standing privileges and blast radius., • Expand PAM scope beyond Linux/Windows to include network devices, databases, cloud infrastructure (AWS), and non-traditional endpoints (operational technology etc.) where applicable to CLS Services' infrastructure., • Where possible Implement JIT and zero standing privileges (ZSP) across PAM-managed resources, restricting privilege duration and scope to specific use cases and time-bound sessions. AI-Assisted IAM Operations • Redistribute high-volume, low-risk IAM tasks to AI agents, such as routine provisioning, deprovisioning, access reviews, and anomaly detection, while maintaining human oversight, exception handling, and strategic decision-making., • Implement AI-driven intelligent recommendations for access reviews, vulnerability remediation, and role engineering to accelerate decision cycles and improve accuracy., • Design and monitor AI agent identity lifecycle management, including provisioning, fine-grained authorization, token monitoring, and continuous audit of AI agent activities to prevent privilege escalation or unauthorized data access. Vendor and Technology Management • Negotiate and manage vendor relationships to ensure technical roadmaps align with CLS Services' strategy, support regulatory requirements, and deliver value. Measurement and Governance • Define and track outcome-driven metrics aligned with business objectives, such as:, • IGA onboarding cycle time and application/infrastructure coverage expansion, • Reduction in identity-related security incidents and unauthorized access events, • PAM scope expansion and just-in-time privilege adoption rates, • User experience and self-service adoption metrics, • AI recommendation accuracy and agent behaviour anomaly detection rates Engineering Leadership & Operating Model • Build and lead a high-performing security engineering function, aligned to product-based delivery., • Help define the target operating model for security engineering, including platform ownership, DevSecOps integration, and automation-first principles., • Establish clear engineering standards, patterns, and reusable security services., • Experience with tooling selection, deployment and vendor management., • Integration of tooling with downstream and upstream systems, • Tooling automation development, • Continuous Tooling Optimization, • Platform Health Monitoring, • Remediation Engineering, • Resiliency Engineering Stakeholder Engagement & Strategy • Work closely and partner with the ED, Head of Identity and Access Management., • Partner with CIO, CISO, heads of technology and senior business leaders to align security engineering initiatives with organizational priorities., • Work closely with the enterprise security architects and solution architects on control gaps, control maturity and business cases., • Translate risk and threat insights into practical engineering outcomes., • Manage vendor relationships and strategic technology partnerships. What we’re looking for: • Senior leadership in security engineering / cyber engineering in complex, regulated environments (markets technology / investment banking / FMI strongly preferred)., • Proven delivery of large-scale security platforms end-to-end (design → build → run), including multi-system integration., • Deep experience identity & privileged access engineering., • Strong track record of regulatory/audit engagement and evidence-based assurance., • Engineering mindset: able to go deep on architecture, automation, telemetry, and operational resilience., • Strategic thinker with the ability to translate vision into execution., • Strong communicator, able to influence at executive level., • Data-driven and outcome-focused, with a bias toward measurable security improvements., • Comfortable operating in fast-paced, evolving environments. Desirable Skills and Experience • SailPoint IGA platform administration and customization (roles, policies, workflows, connectors), • Delinea PAM platform expertise (credential management, session recording, just-in-time workflows), • Cloud infrastructure security (AWS IAM), • Identity and access intelligence (IAI) or AI/ML analytics applied to IAM use cases. Our commitment to employees: We are a small company with a big mandate, so every person is essential to our success. We are also committed to employing and retaining the most talented and dedicated people. What makes us interesting goes beyond our competitive salaries and great benefits. Our work environment is designed around quality outcomes, not output. The FX market would cease to function without our services, and we take pride in being responsible for keeping it running smoothly. We are different from other financial institutions in that we have a flatter and more transparent structure, with accessible leadership. You will be seen, heard and empowered to develop your career. We are a purpose-driven organization, with an inclusive culture that focuses on doing what is right. The well-being of our people is as important to us as the resilience of our systems. In addition to encouraging our people to ‘locate for their day,’ we run a range of initiatives that support a sense of belonging, as well as physical, emotional and mental well-being. Our extensive benefits for employees typically include: • Vacation/annual leave: 25 days in UK/Asia + 3 life days, 23 in US + 3 life days, • Private medical and dental cover and life insurance, • Generous pension contributions in the UK and Asia; matching 401(k) in the US, • Paid volunteer days, • ‘Locate for your day’ hybrid working - 2 days a week in office, • Access to Discover – our learning platform with 1000+ courses from LinkedIn Learning, • Paid parental leave / Coaching and support services, • Career development / LinkedIn Learning, • ‘Heads down days’ with no meetings on the last Friday of every month, • Wellbeing / Mental health support, • Employee Networks (Black Employee Network, Parents & Caregivers Network, Pride Network, Sustainability Network, Veterans Network, Women’s Forum), • Social events Awards: • The Sunday Times Best Places to Work 2023, 2024, 2025 / Big Company / The Sunday Times Awards, • Third place in Britain’s Healthiest Workplace 2022 / Medium Company / Vitality Awards

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: We are seeking a skilled and dependable Setup Technician to support our precision metal stamping operations in Piscataway, New Jersey. Our manufacturing facility produces close-tolerance metal components for highly regulated medical device and aerospace applications. The Setup Technician is responsible for preparing, installing, adjusting, troubleshooting, and operating stamping presses, tooling, and auxiliary equipment. This position ensures that each production job is set up safely and efficiently in accordance with approved work instructions, engineering drawings, quality requirements, and customer specifications. The ideal candidate will have hands-on experience setting up progressive, compound, and secondary-operation dies; operating coil-fed press equipment; performing dimensional inspections; and resolving production issues. This role requires strong mechanical aptitude, attention to detail, accurate documentation, and a consistent commitment to safety and quality. Work Schedule: Monday - Friday (3:30 PM - 12:00 AM) - With Saturday & Sunday Overtime Eligibility Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. First Key Responsibilities: · Press and Tooling Setup · Set up and operate mechanical, hydraulic, and other metal stamping presses in accordance with approved procedures. · Install, align, secure, and remove progressive, compound, blanking, forming, piercing, and secondary-operation dies. · Verify that tooling identification and revision levels match the applicable work order, setup sheet, and production documentation. · Set and adjust shut height, stroke, press speed, feed length, material alignment, die-protection systems, lubrication, and other operating parameters. · Load and thread coil stock or strip material through feeders, guides, and tooling. · Operate and adjust coil-fed stamping systems and related material-feeding equipment. · Complete safe, accurate, and repeatable press setups within established timeframes. · Meet setup and changeover time expectations. · Produce acceptable first-piece samples with minimal adjustment. · Maintain required production rates while protecting product quality. · Minimize scrap, rework, unplanned downtime, and preventable tooling damage. · Complete all required production and quality records accurately. · Follow approved procedures without bypassing safety or quality controls. · Promptly communicate production, tooling, equipment, and quality concerns. · Maintain an organized and professional work area while supporting continuous-improvement initiatives. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: · Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action. · Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments · Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges. · Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others · Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information. · Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions. · Client orientation – Ability to prioritize the client’s needs first. · Accountability – Ability to accept responsibility and account for his/her actions. · Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles. · Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines. · Communication – Ability to effectively communicate with others verbally and in writing. · High emotional intelligence – Ability to offers and accepts feedback with well-meaning intention. The ability to show empathy and encourage partnerships. · Ability to Embrace Change – Ability to adapt and is flexible to changes in work. · Innovative Thinking – Ability to demonstrates a positive attitude and is openness to new ideas and innovations. Knowledge, Skills, and Abilities · Ability to organize work and complete setups within expected timeframes. · Ability to manage multiple priorities in a fast-paced manufacturing environment. · Strong mechanical aptitude and troubleshooting skills. · Ability to read and interpret engineering drawings, blueprints, setup sheets, work instructions, and inspection plans. · Ability to use precision-measuring instruments accurately. · Ability to communicate clearly and professionally with coworkers and supervisors. · Ability to maintain the confidentiality of customer products, drawings, tooling, and manufacturing processes. · Willingness to learn new equipment, tooling systems, quality requirements, and production methods. · Strong commitment to workplace safety and product quality. Education and Experience · High school diploma, GED, vocational education, or equivalent manufacturing experience. · Five or more years of metal stamping setup experience. · Experience with progressive, compound, and secondary-operation dies. · Experience with coil-fed stamping operations and related material-feeding equipment. · Experience working within ISO 9001, ISO 13485, AS9100, or similar regulated quality-management systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Measurement and Verification (M&V) to join our team. The Energy Engineer (Measurement and Verification, or M&V) will plan and execute M&V activities to quantify energy and demand savings for retrofit projects, utility incentive programs, and Energy Savings Performance Contracts (ESPCs). This role focuses on rigorous, defensible savings calculations in accordance with IPMVP and program-specific protocols. Responsibilities • Develop M&V Plans: Author project-specific M&V plans following IPMVP Options A, B, C, and D, tailored to project scope, savings magnitude, and program requirements., • Establish Baselines: Collect, clean, and analyze pre-retrofit utility bill data, sub-metered data, BAS trends, and operating schedules to develop defensible baseline models., • Specify and Oversee Metering: Identify required metering points, specify and source data loggers and meters, coordinate installation, and validate incoming data streams for quality., • Perform Post-Installation Verification: Conduct site visits and spot measurements to verify equipment installation, operating conditions, and as-found schedules; document any commissioning or operational issues affecting savings., • Calculate Verified Savings: Build regression models (whole-building, hour-of-week, change-point) and engineering calculations to quantify energy, demand, and cost savings, including weather normalization where applicable., • Author M&V Reports: Produce baseline reports, savings reports, and annual reconciliation reports for clients, utilities, and program administrators; clearly communicate methodology, assumptions, and uncertainty., • Support Utility Incentive and ESPC Programs: Prepare incentive application packages, respond to program reviewer comments, and support performance guarantees on ESPC projects., • Data Analysis and Tooling: Use Excel, Python, R, or other tools to process large utility and interval datasets; apply statistical techniques such as regression, residual analysis, and outlier detection. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Industrial, or Facilities) or related quantitative degree, • 1-3 years of experience in M&V, energy analytics, utility program implementation, or energy engineering, including at least one internship, co-op, or full-time role, • Working knowledge of IPMVP, ASHRAE Guideline 14, and FEMP M&V Guidelines, • Experience with regression analysis and weather normalization (e.g., NMECR, CalTRACK, ECAM, or equivalent methods), • Strong Excel skills required; experience with Python, R, or SQL preferred, • Understanding of HVAC, lighting, controls, and renewable systems, • Familiarity with utility tariffs, interval data formats (Green Button, ESPI), and BAS trend extraction, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CMVP, or CEM credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team includes over 600 employees across CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: PrecisionX Group seeks a hands-on Industrial/Process Engineer to develop, optimize, and sustain efficient manufacturing processes for precision metal stamping and related operations. This position will focus on improving safety, quality, productivity, equipment utilization, material flow, labor efficiency, and manufacturing costs. The Industrial/Process Engineer will work closely with Production, Quality, Tooling, Maintenance, Supply Chain, and Management to identify operational challenges, implement process improvements, support new-product launches, and ensure that manufacturing processes consistently meet customer requirements. The successful candidate will combine strong analytical and technical skills with the ability to implement practical solutions on the manufacturing floor. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Requirements: Key Responsibilities: • Develop, document, implement, and maintain manufacturing processes for precision metal stamping, assembly, inspection, packaging, and secondary operations., • Establish process sequences, production routings, work-center requirements, standard cycle times, and labor requirements., • Develop and update process flow diagrams, work instructions, setup procedures, standard operating procedures, and visual manufacturing aids., • Evaluate process capability and recommend adjustments to equipment, tooling, materials, inspection methods, and operating parameters., • Ensure that manufacturing processes are repeatable, measurable, properly documented, and capable of meeting quality and delivery requirements., • Develop dashboards, reports, and key performance indicators to track operational performance., • Compare actual production results against established standards and investigate significant variances., • Collaborate with Engineering, Tooling, Quality, and Production to develop manufacturing plans for new parts., • Assist with equipment selection, tooling trials, sample production, process qualification, and production readiness., • Coordinate production trials and document results, lessons learned, open issues, and required corrective actions., • Ensure required process documentation, work instructions, inspection methods, and operator training are complete before production release., • Evaluate opportunities for automation, mistake-proofing, in-process monitoring, and improved material handling. Knowledge, Skills, and Abilities • Diagnose complex tooling problems using part measurements, visual evidence, press observations, and tool inspections., • Determine whether defects result from tooling, material, equipment, setup, lubrication, feeding, or process conditions., • Investigate problems such as excessive burrs, slug pulling, punch breakage, uneven forming, galling, cracking, dimensional drift, and premature wear., • Use structured root-cause methods, including 5 Whys, fishbone diagrams, and failure analysis., • Develop and implement corrective actions that prevent recurring tool failures., • Work with Engineering and Quality to evaluate nonconforming parts and determine appropriate tooling corrections., • Document the problem, cause, repair, and verification results., • Communicate unresolved risks or concerns before tooling is returned to production. Education: • Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related field., • Training in Lean Manufacturing, Six Sigma, quality systems, or project management is preferred. Experience: • 3–5 years of experience in manufacturing, industrial engineering, or process improvement., • Experience developing and improving production processes, workflows, and plant layouts., • Knowledge of Lean Manufacturing, Six Sigma, 5S, Kaizen, root-cause analysis, and continuous improvement., • Experience with time studies, capacity planning, cost reduction, and efficiency improvement., • Ability to analyze production data and establish performance metrics., • Familiarity with CAD, ERP/MRP systems, and Microsoft Excel., • Experience in precision manufacturing or project management/CNC machining is preferred. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments, • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendations for decisions., • Client orientation – Ability to prioritize the client’s needs first., • Accountability – Ability to accept responsibility and account for his/her actions., • Managing staff – Ability to identify and develop the key skills necessary for employees to reach target performance in their specific roles., • Time and Priority Management – Ability to utilize the available time to organize, prioritize, and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing., • High emotional intelligence – Ability to offer and accept feedback with well-meaning intention. The ability to show empathy and encourage partnerships., • Ability to Embrace Change – Ability to adapt and be flexible to changes in work., • Innovative Thinking – Ability to demonstrate a positive attitude and be open to new ideas and innovations. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. Maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description Responsible for safeguarding confidentiality, integrity, and availability of data, applications, infrastructure, and AI systems across the organization. The Security Analyst leads day-to-day operations of the company’s security tooling across on-premises, cloud, and SaaS environments, drives the identification, investigation, and resolution of security events, and partners with engineering and operations teams to embed security throughout the software development and deployment lifecycle. The role also helps the organization securely adopt, deploy, and govern AI technologies Primary Job Functions: Security Operations & Incident Response • Monitor and tune in-place security solutions (SIEM, EDR/XDR, SOAR, email security, DLP, CSPM) for efficient and appropriate operation., • Lead investigations into security incidents escalated beyond Tier 1, including triage, forensic analysis, containment, eradication, and recovery., • Develop, maintain, and tune detections (e.g., SIEM rules, EDR custom detections) aligned to MITRE ATT&CK and the organization’s threat models, • Conduct and participate in tabletop exercises, purple-team engagements, and incident management drills at least annually., • Maintain runbooks and playbooks for common incident types, including cloud, identity, ransomware, and AI/LLM-related incidents. Vulnerability & Threat Management • Lead vulnerability remediation across endpoints, servers, cloud workloads, containers, and SaaS applications, working with infrastructure and engineering teams to drive risk down., • Design and execute vulnerability assessments, penetration tests, red-team exercises, and security audits; manage findings through to closure., • Maintain hardened, up-to-date baselines (CIS Benchmarks or equivalent) for workstations, servers, cloud resources, containers, and network devices., • Consume and operationalize threat intelligence to anticipate and defend against new attacks and threat vectors. Cloud & Infrastructure Security • Design, implement, and review security controls across cloud environments including IAM, network segmentation, encryption, logging, and posture management (CSPM/CNAPP)., • Advance the organization’s Zero Trust strategy across identity, device, network, application, and data layers., • Review Infrastructure-as-Code manifests for security misconfigurations; help maintain policy-as-code guardrails., • Partner with IT and identity teams on IAM, SSO, MFA, privileged access management, and conditional access policies. Application & Software Supply Chain Security • Partner with the CISO and engineering leadership to enforce secure coding practices; deliver annual secure-development training, including OWASP Top 10 and OWASP LLM Top 10 content., • Integrate and tune security testing in CI/CD pipelines: SAST, DAST, SCA, secret scanning, container image scanning, and IaC scanning., • Establish and maintain software supply chain controls, including SBOM generation, dependency review, and alignment with frameworks such as SLSA., • Lead threat-modeling sessions for new products, services, and AI-enabled features. AI Security & Governance • Help define and enforce policies for the safe adoption and use of AI tools within the organization, including LLM-based assistants, agentic systems, and Model Context Protocol (MCP) or similar tool integrations., • Assess and mitigate risks specific to AI/ML systems the organization builds or consumes, including prompt injection, jailbreaks, insecure output handling, training-data and model integrity, sensitive-data leakage, and model/identity supply-chain risks., • Apply AI security frameworks (OWASP LLM Top 10, MITRE ATLAS, NIST AI Risk Management Framework, ISO/IEC 42001 concepts) when evaluating AI vendors, internal AI products, and AI-generated code., • Review AI-generated code for security vulnerabilities and licensing issues after it reaches production., • Partner with Legal, Privacy, and Engineering on AI data handling, retention, and disclosure practices. AI-Augmented Security Operations & Tooling • Evaluate and deploy AI-assisted security tooling (e.g., LLM-powered alert triage, log summarization, threat-intel enrichment, phishing analysis, AI-assisted code review) to improve analyst productivity and reduce mean time to detect/respond., • Build lightweight automations and scripts (Python, PowerShell, or similar), leveraging AI coding assistants where appropriate, to streamline detection, response, and reporting workflows. Compliance, Risk & Audit • Prepare for and respond to internal and external IT audits and risk assessments (GDPR, DORA, PCI DSS, HIPAA, GDPR/CCPA, as applicable)., • Maintain awareness of applicable laws and regulations related to security, data privacy, and AI (including emerging AI regulation)., • Recommend new or enhanced security solutions and assist with their deployment, integration, and configuration in line with the organization’s security standards., • Maintain up-to-date knowledge of the security industry, including new attack techniques, defensive tooling, and AI-related threats and defenses. The duties and responsibilities above describe the general nature and level of work performed. They are not intended to be an exhaustive list of all duties and responsibilities that the incumbent may be expected or asked to perform. Minimum Qualifications: • Bachelor’s degree in Computer Science, Information Security, or a related technical field, OR equivalent professional experience, • 2+ years of experience in Information Security, Security Analyst, or closely related role, • Working knowledge of common cybersecurity frameworks (NIST CSF, NIST 800‑53, ISO 27001, CIS Controls, MITRE ATT&CK), • Hands-on experience securing at least one major cloud provider (AWS, Azure, or GCP), including identity, network, and workload controls., • Experience with vulnerability management, patching, and remediation across servers, endpoints, containers, and cloud workloads, • Experience integrating security into CI/CD pipelines (SAST, DAST, SCA, secret scanning, IaC scanning), • Incident response experience, including triage, containment, eradication, recovery, and post-incident review Licensure, Certification, and/or Registration: • One or more of the following preferred: Security+, CySA+, GIAC (e.g., GSEC, GCIH, GCFA, GCSA), OSCP, SC-900, • AI/ML security credentials (e.g., AI Security/Governance certifications) a plus Salary Range$75,000 – $85,000 base salary, commensurate with experience. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or assume sponsorship of employment visas at this time. We welcome applicants of all backgrounds and national origins Recruitment Updates: Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Fortegra is not accepting unsolicited resumes from search firms for this position. #LI-Onsite

Job Description Fortegra is building a next-generation engineering capability focused on AI-accelerated development and rapid application delivery. We are seeking Full Stack Engineers who thrive in fast-moving environments and have deep experience designing, building, and deploying enterprise-grade applications. The ideal candidate is a high-agency engineer with strong expertise in React-based front-end systems, modern backend frameworks, and secure public-facing application architecture, combined with hands-on experience using AI-driven development tools and agentic coding workflows. Domain experience in Insurance or Financial Services is a big plus. If you are excited about using tools like Claude Code, GitHub CoPilot, Cursor, Lovable, Replit, and other AI-native development tools to dramatically accelerate product development, we want to talk to you. What You’ll Do: Build and Ship Production Applications: • Architect and develop enterprise-grade full stack applications, • Design and build high-quality React front-end systems, • Develop scalable backend services using modern server-side frameworks, • Deploy secure public-facing applications in production environments, • Ensure performance, reliability, and maintainability of distributed systems AI-Accelerated Development: • Use AI coding tools such as Claude Code, CoPilot, Cursor, Replit, Lovable and similar environments to dramatically accelerate development cycles, • Implement AI-driven development workflows including agentic coding, prompt-driven engineering, and automated code generation, • Rapidly prototype and iterate on new product ideas, • Evaluate and integrate emerging AI developer tools Rapid Prototyping and Product Development: • Quickly build and validate new front-end applications and internal tools, • Partner with business stakeholders to transform ideas into working software, • Develop prototypes that evolve into production-ready enterprise systems, • Help establish Fortegra’s modern AI-first engineering culture Security and Production Readiness: • Design and implement secure architectures for public-facing applications, • Implement authentication, authorization, and secure API design, • Apply best practices in application security, cloud security, and compliance, • Ensure secure handling of sensitive financial and customer data The above-cited duties and responsibilities describe the general nature and level of work performed by people assigned to the job. They are not intended to be an exhaustive list of all the duties and responsibilities that an incumbent may be expected or asked to perform. Required Qualifications: • 7+ years of professional software engineering experience, • Significant experience designing and deploying enterprise-grade applications, • Expert-level proficiency with React and modern front-end frameworks, • Strong experience with at least one server-side framework such as:, • Node.js / NestJS / Express, • Python (FastAPI, Django), • .NET Core, • Experience building and deploying secure public-facing applications, • Strong knowledge of API design, distributed systems, and cloud architectures, • Hands-on experience using AI coding tools such as:, • Claude Code, • Cursor, • GitHub Copilot, • Replit, • Experience with AI-assisted or agentic development workflows, • Strong ability to prototype quickly and iterate rapidly Preferred Qualifications: • Insurance or Financial Services domain experience, • Experience building AI-enabled products or developer tooling, • Familiarity with LLMs, AI agents, and prompt engineering, • Experience with serverless and cloud-native architectures, • Experience deploying applications in AWS, Azure, or GCP, • Experience building internal platforms or developer tooling, • Startup or high-velocity product development experience What Makes This Role Unique: • Work in an AI-first engineering environment, • Use modern AI developer tools to dramatically accelerate development, • Build production applications from prototype to deployment, • Help shape Fortegra’s next generation product platform, • Join a high-impact engineering team focused on rapid innovation Salary Range $120,000 – $190,000 base salary, commensurate with experience. Fortegra is not accepting unsolicited resumes from search firms for this position. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or assume sponsorship of employment visas at this time. We welcome applicants of all backgrounds and national origins. Recruitment Updates Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Internal Notice: As part of our commitment to talent development, this position is open for internal promotion applications at the time of public posting. #LI-Onsite

Job DescriptionAbout the role The Encapsulation Operator sets up, operates, cleans, disassembles, and reassembles automatic encapsulation equipment in our dietary supplement manufacturing operation. This position maintains product quality and accurate production records while following current Good Manufacturing Practice (cGMP) requirements, standard operating procedures (SOPs), and safety procedures. The operator works closely with Manufacturing, Quality Assurance, Quality Control, Product Development, and Maintenance. Essential Responsibilities • Set up and operate automatic encapsulation machines, including the Index K120 or comparable equipment. Complete product changeovers and install the correct parts and tooling for each capsule size., • Disassemble, clean, inspect, and reassemble parts and tooling according to SOPs, preventing damage, loss, and contamination. Report worn, damaged, missing, or incorrectly installed parts before startup., • Verify the correct blend, capsule size, and capsule origin against approved records. Interpret capsule colors and color-coded material labels where required by approved procedures, with or without reasonable accommodation, and confirm identity using required records., • Feed material into the hopper at startup and throughout the production run, following approved safety procedures., • Adjust and monitor capsule weight, fill consistency, closing, locking, empty capsule supply, and capsule polisher operation., • Perform required in-process sampling and submit samples to Quality Control for approval. Promptly report weight deviations, improper sealing, material concerns, or other quality problems to the Manufacturing Lead or Supervisor., • Identify basic equipment problems and clear minor jams only when safe, trained, authorized, and consistent with SOPs and applicable machine-guarding and energy-control procedures. Escalate issues requiring Maintenance support., • Accurately complete batch records, in-process logs, downtime records, equipment usage logs, and room documentation. Ensure drums and materials are properly labeled., • Perform routine maintenance and cleaning within training and authorization and maintain a clean, organized work area that meets cGMP requirements., • Move pallets, drums, materials, and parts using approved equipment. Operate manual or powered pallet jacks only when trained and authorized., • Attend and monitor equipment during operation. Coordinate breaks, relief coverage, and safe shutdowns according to procedures, consistent with applicable law and reasonable accommodation., • Wear the personal protective equipment (PPE) required for assigned tasks and work areas., • Perform other related duties consistent with training, safety requirements, and applicable law. Required Qualifications • High school diploma or equivalent, • Experience with machine setup, product changeovers, cleaning, disassembly, reassembly, and basic troubleshooting, • Mechanical aptitude and the ability, following required training and authorization, to independently set up, adjust, operate, and monitor automatic encapsulation equipment while meeting safety and quality requirements, • Ability to read, understand, and follow the English-language SOPs, batch records, and safety instructions used for this position and accurately complete required records. English proficiency is required only to the extent necessary to perform these duties, • Basic math skills for capsule weights, yield reconciliation, and production records, • Attention to detail and the ability to clearly communicate production, equipment, and quality concerns., • Ability to work the stated schedule and meet attendance expectations, subject to legally protected leave and reasonable accommodationPreferred Qualifications, • At least two years of hands-on automatic encapsulation experience in pharmaceutical, nutraceutical, or dietary supplement manufacturing, • Experience with Index K120 or comparable encapsulation equipment, • Experience completing cGMP documentation, • Basic computer skills for manufacturing systemsPay and Benefits, • Base pay: $22.70–$25.00 per hour. Starting pay is determined by job-related experience, skills, and qualifications. Additional compensation: Additional $1.00 per hour paid for night shift differential, • Overtime: This position is eligible for overtime pay. Voluntary overtime opportunities may be available based on business needs., • Training: Employees complete at least three weeks of paid, job-specific training. Authorization to operate equipment independently depends on demonstrated competency and completion of required training., • Benefits include medical, dental, and vision insurance; a Flexible Spending Account (FSA); an Employee Assistance Program (EAP); AFLAC supplemental insurance options; life insurance; a 401(k) plan with an employer match; paid time off (PTO); earned sick time; paid holidays; and a $50 monthly company store allowance for dietary supplements., • This position is eligible to participate in the company’s Deep Employee Ownership (DEO) share program, subject to applicable eligibility requirements, award and vesting terms, and program documents. The future value of DEO shares is not guaranteed., • Benefits and perks are subject to applicable eligibility requirements, plan or program terms, and legal requirements.Physical demands and work environment, • Work involves lifting and moving items weighing up to 50 pounds; standing for extended periods; frequent bending, reaching, stretching, pushing, pulling, and repetitive tasks; and moving materials and machine parts using approved equipment, • Duties take place in manufacturing areas around moving machinery and may involve exposure to airborne powder or dust from production materials. Employees must wear the PPE required for their assigned tasks and work areas and follow company safety procedures, hygiene requirements, and training, • Essential functions may be performed with or without reasonable accommodation, including appropriate material-handling equipment, assistance, or other effective accommodations. Accommodation requests will be considered individually, consistent with applicable lawEqual Employment Opportunity and Accommodations Reliance Vitamin, LLC is an equal opportunity employer and prohibits unlawful discrimination and retaliation. Reasonable accommodations are available to qualified applicants and employees as required by applicable law. To Apply Submit your résumé or application through this job board’s application process. Powered by JazzHR ThVtB2Fsxo

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Senior Manager of Cyber Security is a hands-on technical manager responsible for executing and managing Turtle’s day-to-day cybersecurity operations, program compliance, and team performance. Reporting to the Chief Technology and Information Security Officer (CTISO), this role bridges tactical security operations with programmatic oversight—actively working within security toolsets, leading incident response, managing the organization’s Managed Security Service Provider (MSSP) relationship, and owning the compliance posture across ISO 27001, NIST CMMC Level 2, and the organization’s aspirational ISO 9001 program. The manager leads a team with dedicated coverage across Governance, Risk, and Compliance (GRC) and technical security operations, and drives continuous improvement across people, process, and technology. This is a USA based position. The Senior Manager of Cyber Security is expected to travel to the Corporate headquarters in Clark, NJ as needed, approximately 1–2 times per quarter. Additional travel to USA branch locations will be required on occasion. The role requires availability for after-hours response in the event of a security incident. What You'll Do: Security Operations & Tactical Management: • Manage the organization’s security operations function, serving as a hands-on practitioner across the security toolset; accountable for threat monitoring, vulnerability management, and incident response from detection through post-incident review., • Maintain and continuously improve security controls and tooling configurations across endpoint, network, email, and identity environments, in coordination with the MSSP and technical staff., • Own the phishing simulation program and enforce associated security policies, coordinating outcomes with HR and department management as required. MSSP & Vendor Management: • Support and manage the MSSP relationship end-to-end; direct day-to-day service activities, hold the provider accountable to SLAs, and ensure threat detection and incident escalation protocols meet organizational requirements., • Manage security vendor relationships across the technology portfolio and oversee the vendor risk register. Compliance & Governance: • Enforce the organization’s compliance posture for ISO 27001 and NIST CMMC Level 2; direct the GRC function across evidence maintenance, risk register management, policy governance, and audit readiness., • Provide framework ownership for the organization’s ISO 9001 program; owns the GDP framework alignment and cross-functional coordination, while operational teams retain ownership of document content and process definitions., • Ensure all internal and external audit activity is effective through the GRC Program Manager, for nonconformance tracking, root-cause analysis, and findings closure. AI Governance & Risk: • Represent Cyber Security’s independent role in Turtle’s three-party AI governance model, serving as the security and risk voice alongside the CTO (AI strategy, budget, and vendor governance) and Data Services & Enterprise Architecture (AI roadmap execution) to evaluate, approve, and monitor AI tool adoption across the organization., • Own the AI security risk function, including model and data leak security across AI platforms, shadow AI detection and unsanctioned LLM governance, third party AI vendor risk assessments, and enforcement of AI acceptable use policy for all deployed systems. Team Management: • Lead, develop, and retain the cybersecurity team; establish operating cadences, manage performance, and define training and certification roadmaps aligned to role requirements., • Define and report team KPIs covering security posture, compliance status, and program health to the CTISO; serve as the primary escalation point and cross-functional liaison for cybersecurity matters across the organization. Security Awareness & Training: • Own the Security Awareness Training program—including onboarding, annual refreshers, role-based content, and phishing simulations—track outcomes and enforce policy requirements in coordination with HR and department managers. What You'll Bring • Bachelor’s degree in Cybersecurity, Computer Science, Information Technology, or a related field; equivalent work experience strongly considered in lieu of degree., • 5–7 years of progressive, hands-on cybersecurity experience, with at least 2 years in a leadership or team management capacity., • Demonstrated hands-on experience administering and operating security technologies including SIEM, EDR/XDR, vulnerability management platforms, and MFA/identity protection., • Working knowledge of and operational experience with ISO 27001 and NIST frameworks (CMMC Level 2 / SP 800-171); direct experience owning or managing compliance to these standards is required., • Experience managing MSSPs and security technology vendors, including SLA oversight, performance management, and contract review., • Proven ability to lead incident response end-to-end, • Experience managing or working within a GRC function; familiarity with audit coordination, risk register management, and nonconformance processes., • Familiarity with Good Documentation Practices (GDP) and quality management framework alignment (ISO 9001 exposure a plus)., • Familiarity with AI governance frameworks and emerging AI risk principles; ability to assess AI tools for security, data privacy, and compliance implications in an enterprise context., • Relevant certifications are not required, but are beneficial to the candidate, including CISSP, CISM, or relevant GIAC certifications. What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionAbout the role The Encapsulation Operator sets up, operates, cleans, disassembles, and reassembles automatic encapsulation equipment in our dietary supplement manufacturing operation. This position maintains product quality and accurate production records while following current Good Manufacturing Practice (cGMP) requirements, standard operating procedures (SOPs), and safety procedures. The operator works closely with Manufacturing, Quality Assurance, Quality Control, Product Development, and Maintenance. Essential Responsibilities • Set up and operate automatic encapsulation machines, including the Index K120 or comparable equipment. Complete product changeovers and install the correct parts and tooling for each capsule size., • Disassemble, clean, inspect, and reassemble parts and tooling according to SOPs, preventing damage, loss, and contamination. Report worn, damaged, missing, or incorrectly installed parts before startup., • Verify the correct blend, capsule size, and capsule origin against approved records. Interpret capsule colors and color-coded material labels where required by approved procedures, with or without reasonable accommodation, and confirm identity using required records., • Feed material into the hopper at startup and throughout the production run, following approved safety procedures., • Adjust and monitor capsule weight, fill consistency, closing, locking, empty capsule supply, and capsule polisher operation., • Perform required in-process sampling and submit samples to Quality Control for approval. Promptly report weight deviations, improper sealing, material concerns, or other quality problems to the Manufacturing Lead or Supervisor., • Identify basic equipment problems and clear minor jams only when safe, trained, authorized, and consistent with SOPs and applicable machine-guarding and energy-control procedures. Escalate issues requiring Maintenance support., • Accurately complete batch records, in-process logs, downtime records, equipment usage logs, and room documentation. Ensure drums and materials are properly labeled., • Perform routine maintenance and cleaning within training and authorization and maintain a clean, organized work area that meets cGMP requirements., • Move pallets, drums, materials, and parts using approved equipment. Operate manual or powered pallet jacks only when trained and authorized., • Attend and monitor equipment during operation. Coordinate breaks, relief coverage, and safe shutdowns according to procedures, consistent with applicable law and reasonable accommodation., • Wear the personal protective equipment (PPE) required for assigned tasks and work areas., • Perform other related duties consistent with training, safety requirements, and applicable law. Required Qualifications • High school diploma or equivalent, • Experience with machine setup, product changeovers, cleaning, disassembly, reassembly, and basic troubleshooting, • Mechanical aptitude and the ability, following required training and authorization, to independently set up, adjust, operate, and monitor automatic encapsulation equipment while meeting safety and quality requirements, • Ability to read, understand, and follow the English-language SOPs, batch records, and safety instructions used for this position and accurately complete required records. English proficiency is required only to the extent necessary to perform these duties, • Basic math skills for capsule weights, yield reconciliation, and production records, • Attention to detail and the ability to clearly communicate production, equipment, and quality concerns., • Ability to work the stated schedule and meet attendance expectations, subject to legally protected leave and reasonable accommodationPreferred Qualifications, • At least two years of hands-on automatic encapsulation experience in pharmaceutical, nutraceutical, or dietary supplement manufacturing, • Experience with Index K120 or comparable encapsulation equipment, • Experience completing cGMP documentation, • Basic computer skills for manufacturing systemsPay and Benefits, • Base pay: $22.70–$25.00 per hour. Starting pay is determined by job-related experience, skills, and qualifications., • Overtime: This position is eligible for overtime pay. Voluntary overtime opportunities may be available based on business needs., • Training: Employees complete at least three weeks of paid, job-specific training. Authorization to operate equipment independently depends on demonstrated competency and completion of required training., • Benefits include medical, dental, and vision insurance; a Flexible Spending Account (FSA); an Employee Assistance Program (EAP); AFLAC supplemental insurance options; life insurance; a 401(k) plan with an employer match; paid time off (PTO); earned sick time; paid holidays; and a $50 monthly company store allowance for dietary supplements., • This position is eligible to participate in the company’s Deep Employee Ownership (DEO) share program, subject to applicable eligibility requirements, award and vesting terms, and program documents. The future value of DEO shares is not guaranteed., • Benefits and perks are subject to applicable eligibility requirements, plan or program terms, and legal requirements.Physical demands and work environment, • Work involves lifting and moving items weighing up to 50 pounds; standing for extended periods; frequent bending, reaching, stretching, pushing, pulling, and repetitive tasks; and moving materials and machine parts using approved equipment, • Duties take place in manufacturing areas around moving machinery and may involve exposure to airborne powder or dust from production materials. Employees must wear the PPE required for their assigned tasks and work areas and follow company safety procedures, hygiene requirements, and training, • Essential functions may be performed with or without reasonable accommodation, including appropriate material-handling equipment, assistance, or other effective accommodations. Accommodation requests will be considered individually, consistent with applicable lawEqual Employment Opportunity and Accommodations Reliance Vitamin, LLC is an equal opportunity employer and prohibits unlawful discrimination and retaliation. Reasonable accommodations are available to qualified applicants and employees as required by applicable law. To Apply Submit your résumé or application through this job board’s application process. Powered by JazzHR 6JgmvWEX30

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team includes over 600 employees across CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: Precision X Manufacturing seeks an experienced Maintenance Leader to oversee maintenance in a high-precision manufacturing environment serving the medical and aerospace industries. This position ensures the safety, reliability, accuracy, and availability of production equipment, facility systems, tooling-support equipment, and manufacturing utilities. The Maintenance Leader will supervise maintenance personnel, manage preventive and predictive maintenance programs, coordinate emergency repairs, and lead equipment-reliability improvements. This position requires a hands-on leader who can troubleshoot complex mechanical, electrical, pneumatic, hydraulic, and control-system issues while maintaining the documentation and process discipline required for highly regulated manufacturing. The successful candidate will work closely with Production, Engineering, Quality, Tooling, Environmental Health and Safety, and outside contractors to minimize downtime, protect product quality, and ensure that equipment remains capable of meeting demanding medical and aerospace requirements. Requirements: Key Responsibilities: • Lead, train, schedule, and support maintenance technicians across assigned shifts and manufacturing areas., • Assign daily preventive maintenance, corrective maintenance, troubleshooting, installation, and improvement activities., • Establish clear priorities based on employee safety, product quality, equipment condition, production requirements, and customer commitments., • Provide hands-on technical support during complex equipment breakdowns and critical production interruptions., • Monitor maintenance performance and ensure assigned work is completed safely, correctly, and on schedule., • Develop maintenance employees' technical capabilities through coaching, cross-training, and structured skills development., • Coordinate maintenance coverage across multiple shifts, weekends, planned shutdowns, and emergencies., • Communicate equipment status, production risks, repair progress, and resource requirements to Operations leadership., • Develop, implement, and maintain a comprehensive preventive and predictive maintenance program., • Establish maintenance schedules and inspection frequencies based on equipment criticality, manufacturer recommendations, operating history, and production requirements., • Implement condition-monitoring practices such as vibration analysis, thermal imaging, oil analysis, electrical inspection, and equipment-performance trending when appropriate., • Coordinate planned maintenance with Production to minimize disruption to manufacturing schedules., • Maintain accurate preventive maintenance documentation to support internal, customer, and regulatory audits., • Equipment Troubleshooting and Repair, • Diagnose and repair mechanical, electrical, hydraulic, pneumatic, and electronic equipment failures., • Support the maintenance and repair of precision stamping presses, CNC equipment, wire electrical discharge machines, grinders, mills, lathes, and related manufacturing equipment., • Ensure that replacement components meet the equipment’s technical, quality, and safety requirements., • Document equipment failures, completed repairs, replacement parts, test results, and follow-up actions., • Escalate conditions that could affect employee safety, product quality, environmental compliance, or production capability. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keep own safety and the safety of others at the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments, • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Client orientation – Ability to prioritize the client’s needs first., • Accountability – Ability to accept responsibility and account for his/her actions., • Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Knowledge, Skills, and Abilities • Strong leadership and team-development skills., • Advanced industrial troubleshooting abilities., • Ability to remain calm and make sound decisions during production emergencies., • Ability to balance immediate repair needs with long-term equipment-reliability goals., • Strong attention to detail and documentation accuracy., • Understanding of the relationship between equipment condition, process stability, and product quality., • Ability to communicate technical information clearly to production employees, engineers, quality personnel, contractors, and management., • Ability to manage multiple priorities in a fast-paced manufacturing environment., • Strong commitment to safety, quality, accountability, and continuous improvement., • Ability to protect confidential customer, process, and equipment information. Education and Experience • Technical training in industrial maintenance, electrical systems, mechanical systems, automation, or a related field., • At least five years of industrial maintenance experience in a manufacturing environment., • Previous leadership, supervisory, or team-lead experience., • Strong hands-on knowledge of mechanical, electrical, hydraulic, and pneumatic systems., • Experience troubleshooting industrial machinery and automated equipment., • Experience developing and managing preventive maintenance programs., • Familiarity with computerized maintenance management systems., • Strong root-cause analysis and problem-solving abilities., • Ability to organize priorities and lead employees during high-pressure equipment breakdowns., • Ability to work flexible hours and respond to urgent equipment issues when required. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. Maintain a high level of alertness and caution while performing tasks in this work environment. Benefits: · Competitive salary based on experience and qualifications, with opportunities for overtime pay. · Comprehensive health benefits package, including medical, dental, and vision coverage. · Retirement savings plan with employer match to help secure your financial future. · Access to ongoing professional development and training opportunities to enhance your skills and career growth in the industry. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to jmartinez@precisonxmfg.com

Job Description We are seeking a Punch Press Set-Up Person to Set Up and run Punch Presses of 35-135 Ton metal stamping presses. Responsibilities: • Set-Up and Operate machine tools to produce precision metal parts, • Maintain tooling, fixtures, and gages used in production, advise on needed repairs, • Perform routine maintenance on machinery, • Calculate / Measure dimensions and tolerances using measuring instruments, • Calculate material requirements Qualifications: • Previous experience using OBI Punch Presses to blank, pierce and form metal, • Familiarity with Punch press tooling, • Strong analytical and mathematical skills, • Strong attention to detail\nCompany Description Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers. Providing high quality precision parts and assemblies since 1955. Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers.\r\nProviding high quality precision parts and assemblies since 1955.

Job DescriptionDescription: We are actively seeking a skilled and detail-oriented Tool and Die Maker with expertise in deep drawn metal stamping to join our dynamic manufacturing team. This role is critical to our operations, as you will be responsible for the design, fabrication, and maintenance of precision tools and dies utilized in the production of complex metal components. Your work will directly impact product quality and manufacturing efficiency. Requirements: Key Responsibilities: · Utilize advanced CAD software to design and create tooling and dies tailored specifically for deep drawing applications, ensuring they meet stringent specifications and production requirements. You will fabricate components using various machining techniques, including milling, grinding, and electrical discharge machining (EDM). · Skillfully prepare and set up automated and manual stamping presses for production runs. This includes aligning and securing dies, adjusting settings for material thickness and type, and ensuring consistent operation to achieve optimal quality and production rates. · Implement and adhere to rigorous quality control procedures. Conduct regular inspections and assessments of both tools and the metal parts produced, utilizing precision measurement tools (such as calipers, micrometers, and gauges) to ensure compliance with tolerances and specifications. Document any deviations and collaborate with quality engineers to rectify issues. · Execute routine maintenance and repair work on tools, dies, stamping machines, and ancillary equipment to enhance their lifespan and efficiency. Troubleshoot mechanical and operational issues as they arise, using diagnostic tools and your extensive knowledge of hydraulic and pneumatic systems. · Work closely with product design engineers to discuss tooling design modifications and improvements based on production experiences. Participate in cross-functional team meetings to address production challenges, ensuring that tools and processes align with evolving project requirements. · Maintain comprehensive and precise documentation of tooling specifications, maintenance schedules, and production logs. This will include creating detailed reports on tooling performance, material usage, and production yield metrics, ensuring compliance with industry standards and internal procedures. · Actively participate in continuous improvement projects, leveraging Lean Manufacturing principles to propose and implement enhancements to tooling designs and production processes. This may involve analyzing production data to identify trends and areas for improvement. Qualifications: · High school diploma or equivalent; technical degree or certification in tool and die making, machining, or a related field is preferred. · A minimum of 5 years of proven experience as a Tool and Die Maker, specifically within deep drawn metal stamping operations, with a solid track record of successful project completion. · Advanced proficiency in reading and interpreting complex blueprints, technical drawings, and schematics, along with strong mathematical skills for accurate measurements and calculations. · Thorough understanding of machining processes, materials (including stainless steel, aluminum, and composite materials), and advanced heat treatments relevant to tool manufacturing. · Familiarity with precision measurement tools and techniques, along with experience using CNC machinery and programming for tool production. · Excellent analytical and problem-solving skills, with a keen attention to detail and the ability to identify root causes of issues in tooling and production. · Proven capability to work independently, exercise initiative, and collaborate effectively as part of a cohesive team in a fast-paced, high-volume manufacturing environment. Working Conditions: This position involves exposure to metalworking machinery, raw materials, and sometimes hazardous elements, necessitating strict adherence to safety protocols and regulations. The role may require prolonged periods of standing and the ability to lift and move heavy objects, as well as flexibility to work overtime or shift hours as production demands dictate. Benefits: · Competitive salary based on experience and qualifications, with opportunities for overtime pay. · Comprehensive health benefits package, including medical, dental, and vision coverage. · Retirement savings plan with employer match to help secure your financial future. · Access to ongoing professional development and training opportunities to enhance your skills and career growth in the industry. If you are a skilled Tool and Die Maker with a passion for precision engineering and a desire to contribute meaningfully to a forward-thinking manufacturing environment, we encourage you to apply. Join us in producing high-quality metal components that drive innovation and excellence in our industry! Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to jmartinez@precisonxmfg.com

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: We are seeking a skilled and dependable Setup Technician to support our precision metal stamping operations in Piscataway, New Jersey. Our manufacturing facility produces close-tolerance metal components for highly regulated medical device and aerospace applications. The Setup Technician is responsible for preparing, installing, adjusting, troubleshooting, and operating stamping presses, tooling, and auxiliary equipment. This position ensures that each production job is set up safely and efficiently in accordance with approved work instructions, engineering drawings, quality requirements, and customer specifications. The ideal candidate will have hands-on experience setting up progressive, compound, and secondary-operation dies; operating coil-fed press equipment; performing dimensional inspections; and resolving production issues. This role requires strong mechanical aptitude, attention to detail, accurate documentation, and a consistent commitment to safety and quality. Work Schedule: Monday - Friday (7:00 AM - 3:30 PM) & Overtime Eligible Flexibility To Work 2nd Shift (3:30 PM - 12:00 AM) Is also Preferred Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. First Key Responsibilities: · Press and Tooling Setup · Set up and operate mechanical, hydraulic, and other metal stamping presses in accordance with approved procedures. · Install, align, secure, and remove progressive, compound, blanking, forming, piercing, and secondary-operation dies. · Verify that tooling identification and revision levels match the applicable work order, setup sheet, and production documentation. · Set and adjust shut height, stroke, press speed, feed length, material alignment, die-protection systems, lubrication, and other operating parameters. · Load and thread coil stock or strip material through feeders, guides, and tooling. · Operate and adjust coil-fed stamping systems and related material-feeding equipment. · Complete safe, accurate, and repeatable press setups within established timeframes. · Meet setup and changeover time expectations. · Produce acceptable first-piece samples with minimal adjustment. · Maintain required production rates while protecting product quality. · Minimize scrap, rework, unplanned downtime, and preventable tooling damage. · Complete all required production and quality records accurately. · Follow approved procedures without bypassing safety or quality controls. · Promptly communicate production, tooling, equipment, and quality concerns. · Maintain an organized and professional work area while supporting continuous-improvement initiatives. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: · Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action. · Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments · Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges. · Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others · Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information. · Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions. · Client orientation – Ability to prioritize the client’s needs first. · Accountability – Ability to accept responsibility and account for his/her actions. · Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles. · Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines. · Communication – Ability to effectively communicate with others verbally and in writing. · High emotional intelligence – Ability to offers and accepts feedback with well-meaning intention. The ability to show empathy and encourage partnerships. · Ability to Embrace Change – Ability to adapt and is flexible to changes in work. · Innovative Thinking – Ability to demonstrates a positive attitude and is openness to new ideas and innovations. Knowledge, Skills, and Abilities · Ability to organize work and complete setups within expected timeframes. · Ability to manage multiple priorities in a fast-paced manufacturing environment. · Strong mechanical aptitude and troubleshooting skills. · Ability to read and interpret engineering drawings, blueprints, setup sheets, work instructions, and inspection plans. · Ability to use precision-measuring instruments accurately. · Ability to communicate clearly and professionally with coworkers and supervisors. · Ability to maintain the confidentiality of customer products, drawings, tooling, and manufacturing processes. · Willingness to learn new equipment, tooling systems, quality requirements, and production methods. · Strong commitment to workplace safety and product quality. Education and Experience · High school diploma, GED, vocational education, or equivalent manufacturing experience. · Five or more years of metal stamping setup experience. · Experience with progressive, compound, and secondary-operation dies. · Experience with coil-fed stamping operations and related material-feeding equipment. · Experience working within ISO 9001, ISO 13485, AS9100, or similar regulated quality-management systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job DescriptionDescription: Azure Cloud Infrastructure Engineer Location Hybrid / Remote (US) Role Overview We are looking for a Cloud Infrastructure & DevOps Engineer to help build, operate, and continuously improve the cloud platforms supporting SaleDock and Celerant retail systems. This role is responsible for managing Azure infrastructure, improving reliability, and developing automation that streamlines provisioning and deployment processes for new ecommerce customers. You will work closely with development and support teams to ensure our production and test environments are secure, scalable, and operationally efficient. Key Responsibilities Cloud Infrastructure & Operations • Build, manage, and maintain Azure cloud infrastructure supporting ecommerce and retail operations., • Administer production and test environments across Linux (and Windows where required)., • Monitor performance, capacity, uptime, and resource consumption across hosted applications., • Create and maintain dashboards and monitoring views to proactively identify issues., • Ensure high availability and reliability across customer-facing services. Automation & Deployment • Develop and maintain automation for provisioning, configuration, testing, and deployment., • Maintain CI/CD pipelines for ecommerce environments, including creating pipelines for new customer sites., • Improve and automate manual go-live processes for onboarding new ecommerce customers, including:, • Provisioning web applications, • Configuring custom domains and SSL validation, • Deploying environment-specific infrastructure and pipelines Support Tooling & Reliability • Develop internal tooling that enables support teams to monitor, restart, and manage endpoints/services., • Assist with incident response, troubleshooting, and root cause analysis., • Participate in an on-call or out-of-hours escalation rota (if required) to support uptime expectations. Security & Best Practices • Apply operational security best practices across the Azure environment., • Implement hardening, access controls, patching processes, and secure networking., • Ensure infrastructure is compliant with internal standards and industry best practice. Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.). Nice to Have • Experience running multi-tenant ecommerce or SaaS platforms., • Experience with scaling strategies, load balancing, and resilience planning., • Understanding of security frameworks and governance in Azure (Defender, Policy, RBAC best practices)., • Experience building internal support tooling or operational dashboards. What Success Looks Like • Production and Test infrastructure with high uptime, security, and incident handling, • Faster and more automated ecommerce customer go-live processes., • Improved monitoring and visualization tooling, • Improved reliability and visibility of production systems., • Clear monitoring dashboards and proactive alerting in place.Requirements: Required Skills & Experience • Strong experience managing cloud infrastructure in Microsoft Azure., • Experience with Infrastructure as Code (Terraform, Bicep, ARM, etc.)., • Strong CI/CD pipeline experience (Azure DevOps, GitHub Actions, etc.)., • Experience supporting production workloads and diagnosing performance issues., • Solid understanding of networking concepts (VNets, subnets, routing, firewalls, DNS)., • Comfortable working with Linux administration (and Windows Server where relevant)., • Scripting / automation skills (PowerShell, Bash, Python, etc.)., • Familiarity with monitoring tools (Azure Monitor, Application Insights, Grafana, etc.).

Machinist - Tool & Die | Edison, NJ | Starting Pay $35.95per hour Join Silgan Containers, America's largest metal food packaging producer, as a Machinist in Edison, NJ.We'relooking for skilled professionals tooperateand maintain precision tooling and CNC equipment in a fast-paced manufacturing environment. What We Offer Competitive Pay: Starting at $35.95 per hour plus shift differential for 3rd shift Consistent Wage Increases Comprehensive Benefits: Medical, dental, vision, prescription coverage, life insurance Specialty Programs: Pet insurance, health programs for diabetes, hypertension, and more 401kwith Company Contributions Paid Time Off & Holidays Training & Tuition Reimbursement Company-Paid Uniforms & Prescription Safety Glasses Safety Shoe Allowance Commitment to Safety: "Drive to Zero Injuries" initiative Sustainability Leadership: Edison is Silgan's first facility with on-site solar power WhatYou'llDo Operate andmaintainCNC grinders, lathes, Bridgeport mills, welders, plasma cutters Perform tool and die machining using blueprints and precision measuring instruments Troubleshoot and repair gearboxes, pumps, and production equipment Refurbish and rebuild tooling for can-making machinery Measure and calculate raw material requirements Catalog andorganizeproduction tooling for efficiency Perform quality checks and ensure compliance with strict manufacturing tolerances Follow lockout/tagout safety procedures Operate plant equipment such as forklifts, lifts, and booms What We Need High School Diploma or GED- Trade school preferred 2+ years of experience in a manufacturing or machining environment Ability to work independently and meet deadlines Strong mechanical aptitude and attention to detail About Silgan Containers We are the largest metal food packaging producer in North America, committed to sustainability and innovation. From increasing recycled content to renewable energy initiatives,we'rerethinking how to make the metal food can. Ready to start your career as a Machinist in Edison, NJ? Apply today and join a team that values safety, growth, and innovation. LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an "at-will" basis. Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug-free workplace.

Overview A high number of candidates may make applications for this position, so make sure to send your CV and application through as soon as possible. The Product Engineer I supports the design, launch, and ongoing improvement of new and existing products in a manufacturing environment. This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. Working closely with manufacturing teams, customers, vendors, and suppliers, the Product Engineer I troubleshoots production issues, supports equipment and process qualification and validation, develops customized solutions, identifies cost-saving and reliability improvements, and delivers projects on time and within budget. Essential Functions • Manage engineering changes for new and existing products; communicate changes to all levels of manufacturing teams as well as suppliers accordingly, • Ensure the manufacturability of new and existing products by participating in the product design and stage gate development process in the early stages of product development, • Identify and implement programs to improve the manufacturability and reliability of products, • Support production lines to minimize or eliminate downtime, • Provide support for the maintenance of items and Bills of Material (BOM) in MRP system., • Create and review assembly drawings for existing and new products, • Determine parts and tools needed in order to achieve manufacturing goals according to product specifications, • Prepare and maintain parts guide for your product line to provide technical support for customers, sales, customer service and Humanscale field technicians for new and existing products, • Identify opportunities for cost reductions and coordinate initiatives to achieve savings in a timely manner, • Plan and accomplish projects & goals on time and within budget, • Support the installation, qualification, verification, and validation of new and existing equipment and processes, • Coordinate with vendors and suppliers regarding technical specifications and alternatives, including the procurement of material and components, • Generate specification control drawings as a means of communication with vendors and suppliers, • Resolve technical, procedural and logistical problems in manufacturing by using proper troubleshooting and failure analysis techniques, • Design customized prototypes and final functional units to satisfy customer Special Order Requests (SOR), • Any other duties as assigned Qualifications • Bachelor's or Master's degree in Mechanical Engineering or similar discipline, • 0 to 2 years of engineering experience, including relevant internships, co-ops, or hands-on academic product development projects., • Internship experience working in an Engineering capacity at a manufacturing facility, • Knowledge of engineering principles, practices and techniques commonly employed in the design and production of products, • Excellent organizational, analytical, and interpersonal skills, • Excellent verbal and written communication skills with the ability to communicate engineering concepts to non-engineers, • Understanding of Lean Manufacturing concepts, techniques and tools, • Understanding of and experience working with machines & mechanical systems, • Must be able to work in a team environment, helping others when necessary, • Bilingual in Spanish and English preferred PHYSICAL REQUIREMENTS • Ability to exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, • Must be able to do repetitive bending and stretching, • Ability to lift 60 pounds, • Ability to be onsite 5 days a week, • Ability to move about the Production floor frequently and occasionally stoop, kneel, or crouch, • Ability to use hands to operate tools, install, adjust and attach parts, • Visual acuity for tasks that require attention to detail, such as operating machinery or performing quality control COMPUTER SKILLS • Good understanding of GD&T for assembly and part drawings, • Experience in using 3D CAD modeling software (i.e., Solidworks), • Experience with MRP systems such as INFOR is preferred, • Strong MSOffice and other computer skills Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. Salary Range: $71,434 - $104,194 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. The Product

Overview The Product Engineer I supports the design, launch, and ongoing improvement of new and existing products in a manufacturing environment. This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. Working closely with manufacturing teams, customers, vendors, and suppliers, the Product Engineer I troubleshoots production issues, supports equipment and process qualification and validation, develops customized solutions, identifies cost-saving and reliability improvements, and delivers projects on time and within budget. Essential Functions • Manage engineering changes for new and existing products; communicate changes to all levels of manufacturing teams as well as suppliers accordingly, • Ensure the manufacturability of new and existing products by participating in the product design and stage gate development process in the early stages of product development, • Identify and implement programs to improve the manufacturability and reliability of products, • Support production lines to minimize or eliminate downtime, • Provide support for the maintenance of items and Bills of Material (BOM) in MRP system., • Create and review assembly drawings for existing and new products, • Determine parts and tools needed in order to achieve manufacturing goals according to product specifications, • Prepare and maintain parts guide for your product line to provide technical support for customers, sales, customer service and Humanscale field technicians for new and existing products, • Identify opportunities for cost reductions and coordinate initiatives to achieve savings in a timely manner, • Plan and accomplish projects & goals on time and within budget, • Support the installation, qualification, verification, and validation of new and existing equipment and processes, • Coordinate with vendors and suppliers regarding technical specifications and alternatives, including the procurement of material and components, • Generate specification control drawings as a means of communication with vendors and suppliers, • Resolve technical, procedural and logistical problems in manufacturing by using proper troubleshooting and failure analysis techniques, • Design customized prototypes and final functional units to satisfy customer Special Order Requests (SOR), • Any other duties as assigned Qualifications • Bachelor's or Master's degree in Mechanical Engineering or similar discipline, • 0 to 2 years of engineering experience, including relevant internships, co-ops, or hands-on academic product development projects., • Internship experience working in an Engineering capacity at a manufacturing facility, • Knowledge of engineering principles, practices and techniques commonly employed in the design and production of products, • Excellent organizational, analytical, and interpersonal skills, • Excellent verbal and written communication skills with the ability to communicate engineering concepts to non-engineers, • Understanding of Lean Manufacturing concepts, techniques and tools, • Understanding of and experience working with machines & mechanical systems, • Must be able to work in a team environment, helping others when necessary, • Bilingual in Spanish and English preferred PHYSICAL REQUIREMENTS • Ability to exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, • Must be able to do repetitive bending and stretching, • Ability to lift 60 pounds, • Ability to be onsite 5 days a week, • Ability to move about the Production floor frequently and occasionally stoop, kneel, or crouch, • Ability to use hands to operate tools, install, adjust and attach parts, • Visual acuity for tasks that require attention to detail, such as operating machinery or performing quality control COMPUTER SKILLS • Good understanding of GD&T for assembly and part drawings, • Experience in using 3D CAD modeling software (i.e., Solidworks), • Experience with MRP systems such as INFOR is preferred, • Strong MSOffice and other computer skills Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. Salary Range: $71,434 - $104,194 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. Working clos

Oversee the support of data training programes, liaising with the Training and Awareness team to educate staff on data security policies, best practices, and tooling to promote secure data handling behaviors and minimize risks. Experience in data security or information security (12 – 15 years), i

About CLS: CLS is the trusted party at the centre of the global FX ecosystem. Utilized by thousands of counterparties, CLS makes FX safer, smoother and more cost effective. Trillions of dollars’ worth of currency flows through our systems each day. Created by the market for the market, our unrivalled global settlement infrastructure reduces systemic risk and provides standardization for participants in many of the world’s most actively traded currencies. We deliver huge efficiencies and savings for our clients: in fact, our approach to multilateral netting shrinks funding requirements by over 96% on average, so clients can put their capital and resources to better use. CLS products are designed to enable clients to manage risk most effectively across the full FX lifecycle – whether through more efficient processing tools or market intelligence derived from the largest single source of FX executed data available to the market. Find out if this opportunity is a good fit by reading all of the information that follows below. Job information: • Functional title – IAM Engineering Lead, • Department - CISO, • Corporate level - Director, • Report to – Head of Security Architecture, Design and Engineering, • Location – Iselin, New Jersey. On site 2 days per week, • Expected full-time salary range between $200,000 - $230,000 + variable compensation + 401(k) match + benefits. Note: Disclosure as required by NY Pay Transparency Law of the expected salary compensation range for this role. What you will be doing: As Head of IAM Engineering, you will lead the strategic design, implementation, and governance of a comprehensive identity and access management program that protects CLS Services' most critical asset: trusted digital identity. This is a hybrid executive and technical role that bridges security, compliance, and business enablement in a highly regulated financial services environment. You will be responsible for architecting and scaling identity systems across our workforce, customers, and machine identities—each with distinct risk profiles and regulatory demands. This includes accelerating onboarding of applications and infrastructure into our IGA platform, expanding our PAM scope to network devices and non-traditional endpoints, building a comprehensive secrets management capability, and embedding AI-assisted automation to reduce manual operational burden while maintaining security and auditability. Key Responsibilities: • Scale application and infrastructure onboarding to IAG through a phased, iterative deployment strategy, prioritizing critical systems and expanding coverage over time to maximize early wins while managing complexity., • Automate provisioning and access reviews using IAG connectors, role-based access control (RBAC) frameworks, and AI-driven workflows to reduce manual errors and accelerate user lifecycle management., • Implement self-service capabilities and identity workflow automation to automate and accelerate onboarding to the IAG platform., • Maintain data quality and integration governance by establishing rigorous data cleansing practices, continuous syncing with authoritative HR systems, and monitoring to ensure accurate, consistent identity and entitlement data., • Where possible Leverage AI and machine learning to generate role recommendations, detect over-permissioning, and automate access certification workflows at scale., • Govern machine identities (workloads, services, future AI agents) through IAG lifecycle management, ensuring all identity types are managed through a unified access governance framework., • Deploy behavioral anomaly detection using AI/ML to identify unauthorized or suspicious IAM activities, including potential abuse by rogue AI agents operating at machine velocity., • Onboard critical device and infrastructure accounts to PAM, including network devices, databases, and cloud infrastructure, implementing just-enough-privilege (JEP) and just-in-time (JIT) access models to reduce standing privileges and blast radius., • Expand PAM scope beyond Linux/Windows to include network devices, databases, cloud infrastructure (AWS), and non-traditional endpoints (operational technology etc.) where applicable to CLS Services' infrastructure., • Where possible Implement JIT and zero standing privileges (ZSP) across PAM-managed resources, restricting privilege duration and scope to specific use cases and time-bound sessions. AI-Assisted IAM Operations • Redistribute high-volume, low-risk IAM tasks to AI agents, such as routine provisioning, deprovisioning, access reviews, and anomaly detection, while maintaining human oversight, exception handling, and strategic decision-making., • Implement AI-driven intelligent recommendations for access reviews, vulnerability remediation, and role engineering to accelerate decision cycles and improve accuracy., • Design and monitor AI agent identity lifecycle management, including provisioning, fine-grained authorization, token monitoring, and continuous audit of AI agent activities to prevent privilege escalation or unauthorized data access. Vendor and Technology Management • Negotiate and manage vendor relationships to ensure technical roadmaps align with CLS Services' strategy, support regulatory requirements, and deliver value. Measurement and Governance • Define and track outcome-driven metrics aligned with business objectives, such as:, • IGA onboarding cycle time and application/infrastructure coverage expansion, • Reduction in identity-related security incidents and unauthorized access events, • PAM scope expansion and just-in-time privilege adoption rates, • User experience and self-service adoption metrics, • AI recommendation accuracy and agent behaviour anomaly detection rates Engineering Leadership & Operating Model • Build and lead a high-performing security engineering function, aligned to product-based delivery., • Help define the target operating model for security engineering, including platform ownership, DevSecOps integration, and automation-first principles., • Establish clear engineering standards, patterns, and reusable security services., • Experience with tooling selection, deployment and vendor management., • Integration of tooling with downstream and upstream systems, • Tooling automation development, • Continuous Tooling Optimization, • Platform Health Monitoring, • Remediation Engineering, • Resiliency Engineering Stakeholder Engagement & Strategy • Work closely and partner with the ED, Head of Identity and Access Management., • Partner with CIO, CISO, heads of technology and senior business leaders to align security engineering initiatives with organizational priorities., • Work closely with the enterprise security architects and solution architects on control gaps, control maturity and business cases., • Translate risk and threat insights into practical engineering outcomes., • Manage vendor relationships and strategic technology partnerships. What we’re looking for: • Senior leadership in security engineering / cyber engineering in complex, regulated environments (markets technology / investment banking / FMI strongly preferred)., • Proven delivery of large-scale security platforms end-to-end (design → build → run), including multi-system integration., • Deep experience identity & privileged access engineering., • Strong track record of regulatory/audit engagement and evidence-based assurance., • Engineering mindset: able to go deep on architecture, automation, telemetry, and operational resilience., • Strategic thinker with the ability to translate vision into execution., • Strong communicator, able to influence at executive level., • Data-driven and outcome-focused, with a bias toward measurable security improvements., • Comfortable operating in fast-paced, evolving environments. Desirable Skills and Experience • SailPoint IGA platform administration and customization (roles, policies, workflows, connectors), • Delinea PAM platform expertise (credential management, session recording, just-in-time workflows), • Cloud infrastructure security (AWS IAM), • Identity and access intelligence (IAI) or AI/ML analytics applied to IAM use cases. Our commitment to employees: We are a small company with a big mandate, so every person is essential to our success. We are also committed to employing and retaining the most talented and dedicated people. What makes us interesting goes beyond our competitive salaries and great benefits. Our work environment is designed around quality outcomes, not output. The FX market would cease to function without our services, and we take pride in being responsible for keeping it running smoothly. We are different from other financial institutions in that we have a flatter and more transparent structure, with accessible leadership. You will be seen, heard and empowered to develop your career. We are a purpose-driven organization, with an inclusive culture that focuses on doing what is right. The well-being of our people is as important to us as the resilience of our systems. In addition to encouraging our people to ‘locate for their day,’ we run a range of initiatives that support a sense of belonging, as well as physical, emotional and mental well-being. Our extensive benefits for employees typically include: • Vacation/annual leave: 25 days in UK/Asia + 3 life days, 23 in US + 3 life days, • Private medical and dental cover and life insurance, • Generous pension contributions in the UK and Asia; matching 401(k) in the US, • Paid volunteer days, • ‘Locate for your day’ hybrid working - 2 days a week in office, • Access to Discover – our learning platform with 1000+ courses from LinkedIn Learning, • Paid parental leave / Coaching and support services, • Career development / LinkedIn Learning, • ‘Heads down days’ with no meetings on the last Friday of every month, • Wellbeing / Mental health support, • Employee Networks (Black Employee Network, Parents & Caregivers Network, Pride Network, Sustainability Network, Veterans Network, Women’s Forum), • Social events Awards: • The Sunday Times Best Places to Work 2023, 2024, 2025 / Big Company / The Sunday Times Awards, • Third place in Britain’s Healthiest Workplace 2022 / Medium Company / Vitality Awards

Rio Controls & Hydraulics is looking for an experienced hydraulic technician with potential growth into a supervisor or management role of your own location in Staten Island. Currently we have a healthy book of business with one mid-level technician and looking to bring in experienced hands on hydraulic technician to help in growing the business. Great small company environment. We currently have 5 locations around the nation where we support each other location as needed. Each location operates autonomously. Management in each location is responsible to meet budget goals and quality standards without corporate interference. Must be a self-starter, motivated, operate with integrity and fairness and be customer orientated. Great Compensation! Responsibilities: • Duties:, • Setup and operate a variety of machines (manual and CNC), tools, etc to produce materials for jobs, service or facilities, • Fabricate and modifying material, • Utilize machining knowledge and mechanical aptitude to assist in engineering, design and assembly, • Assist mechanical engineer with programming for CNC machines., • Any other duties required by the company, • Service:, • Maintaining a high level of communication with the Service Supervisor and Mechanical Engineer, • Responsible for equipment/tooling and consumables for job and any items to complete the task(s) asked of them, • Responsible in helping keeping machinist area clean, • Project Management:, • Responsible for letting the Service Manager and Mechanical Engineer know if help is needed on projects to complete the repairs in the allotted time, • Inventory and Recording:, • Responsible for making sure that all parts taken from inventory are written down and all paperwork is turned into the Office Coordinator and Service Supervisor, • Responsible for making sure all parts not used on the job are turned back into Inventory Control Department Qualifications: • Education:, • High School or GED Diploma, • Practical Experience:, • TWIC Card, • Valid Driver's License, • Minimum of 5 years of experience as a Machinist, • Good communications skills, • Knowledge in reading and interpreting schematics for machining Full Compensation Package Available to include: • Competitive Salary, • Medical, Dental, • 401K, Paid Holiday

Job ID: 20916806Reference Number: 23-02017Title: java front ArchitectLocation: Iselin, NJ, 08830Posted Date: 2023-12-05Contact: Shyam MaramContact Email: shyam@hanstaffing.comContact Phone: (848) 234-8733Company: HAN Staffing Java Frontend Architect Malvern, PA Hybrid Must No Remoteshyam@hanstaffing.comManager inputs: 10-15+ years of experience of JavaScript development (Angular, typescript, NodeJS, nestJS, react ETC) and AWS experience. Reliability Architecture and Engineering - This role needs to be equipped with both Software and Infrastructure full stack architecture and engineering abilities Additional Info: Ability to conduct research; Excellent critical thinking skills; Team player; Communicates well Responsibilities Develop solutions to solve large scale system reliability problems in both software and infrastructure; Enhance observability tooling; Automate system reliability tooling; Scale product and tooling solutions. Qualifications Deep understanding of observability engineering principles and tooling; Expertise in Open Telemetry; Expertise in large distributed systems scaling and fault tolerance practices; Expertise in networking; Expertise in AWS services (CloudFront, RDS, Dynamo, ECS, EKS, Lambda, FIS, Kinesis, etc.); Hands on experience with modern DevOps tooling (CloudFormation, GitHub actions, terraform, etc); Versatile in programing languages - Node.js, Typescript, Angular, Java, Python, Shell; Expertise in reliability engineering practices - loose coupling, fault tolerant practices, performance and chaos engineering practices, profiling, etc.

Job ID: 27860499Reference Number: 26-00294Title: Full Stack Engineer with deep PythonLocation: Iselin, NJ, 08830Posted Date: 2026-03-27Contact: Deepak KumarContact Email: dipak@hanstaffing.comContact Phone: (551) 795-0621Company: HAN StaffingSenior Full Stack Engineer with deep Python expertise to drive our Google Cloud Platform integrations. You will design robust FastAPI endpoints that interface with Google Client Libraries to automate resource management and infrastructure scaling. You will act as a technical bridge, collaborating with our frontend developers to translate complex GCP requirements into intuitive user experiences. This role requires a mastery of Python internals and a commitment to "clean code " and architectural best practices. GCP Management: Use Google Cloud Client Libraries to programmatically create and monitor cloud resources. API Excellence: Develop well-documented REST/GraphQL endpoints using FastAPI and SQLAlchemy. Experience with GenAI Tools & DB: Experience with any GenAI tools and LLMs and how to use them and set guardrails etc. Understanding of SQL Schemas (PostgreSQL) and Cloud data stores. Frontend Collaboration: Support our React team by understanding TypeScript and Tailwind to ensure smooth full-stack delivery. Security Standards: Manage complex identity flows and authorization using Okta and OIDC. Modern Tooling: Use AI coding assistants to maintain high code quality and optimize PostgreSQL query perform

Job ID: 19270495Reference Number: 23-00590Title: CyberArk PAM Tech AnalystLocation: Iselin, NJ, 08830Posted Date: 2023-03-20Company: HAN Staffing Requirements: Strong technical skills, excellent communications and critical thinking skills, and the ability to engage and interact with global teams. Experience and expertise in CyberArk PAM solution Taking on and further developing/deploying of our client's Privileged Access Management solution based on CyberArk technology. Ability to work with the internal Project team and end customer to continue design and deployment activities and further enhance the PAM solution Documentation skills Security Policy and Governance experience and appreciation Identity & Access Management/IDAM experience and knowledge Design-level and hands-on skills with the following technologies: CyberArk Privileged Access Suite Secure Password Vault and Safes Central Policy Manager Privileged Session Manager Deep Security knowledge spanning infrastructure, network, identity management and application security practices Work as part of our Access Control team within the Security IAM (Identity & Access Management) Engineering organization to design and deliver automated identity and governance solutions across multiple security systems indifferent technology to ensure compliance processes run smoothly. Design & deliver solutions for complex access requests, ensuring our lifecycle management products cater appropriately for new and existing entitlement types in an automated and efficient manner, as per security policy. Work as part of our Compliance & Access Control team to assist with audits of entitlements, appropriateness of access and Quarterly Access Reviews, as defined by our Identity & Access Management Policies. Assist with audit & compliance reviews, evidence collection and pre-certification testing, ensuring timelines are met for Compliance Certifications (e.g. SOX, SOC, SOC2) at the required cadence. Partner with the GRC (Governance Risk & Compliance) team and internal & external auditors, to ensure all new automation, controls and processes are reviewed for accuracy and appropriateness. Partner with various business units to assist in their onboarding to Identity Governance tooling and automation, as built by the Access Control & Security IAM Engineering teams. Required Skills/Experience: BS/BEng/BTech degree, or equivalent work experience. Experience and expertise in CyberArk PAM solution Experience with Linux, Windows, GIThub, Cloud scale Identity, Access Management (Single Sign-On/Multi Factor Authentication), Authorization services or design and architecture of IAM services Knowledge of authentication platforms: Kerberos, LDAP, Radius, AD. Federation platforms/protocols: Oauth, OpenID, SAML, WS-Fed, etc. Working experience with commercial/enterprise IAM platforms: Ping Identity, Active Directory or Open Source: OpenLDAP, OpenDJ. Experience in consumption of Web Service APIs: JSON / XML. Experience of the Salesforce Platform. Automated Testing - Writing functional and regression test cases. Selenium exp or similar Excellent analytical, conceptual, problem-solving skills in addition to excellent attention to detail. Self-starting, proactive and organized, as well as being capable of long-term thinking. Passion for scaling systems and software, reducing manual activities, and a growth mindset. Knowledge of Compliance Certifications (SOX, SOC, SOC2) Strong technical understanding of systems, networking and identity fundamental In-depth knowledge of: Source Control Systems (Git, Gitlab, SVN, or similar) Software branching strategies and trunk-based development Created build/test/deploy pipelines Fluent in one or more scripting or object-oriented languages Understands object-oriented software design Worked in a test-driven development (TDD) environment with a quality mindset Preferred Skills/Experience Understanding of cloud-native or microservice architecture Worked with globally-distributed teams across time zones Worked in a large enterprise with a history of influencing change across many stakeholders Worked in an Agile software development environment Understanding of a Secure Software Development Lifecycle

We place operators who translate strategy into delivery PMPs, Scrum Masters, agile coaches, Six Sigma black belts, and change-management practitioners certified in Prosci or the client's preferred framework. Candidates are validated against the specific enterprise tooling the client runs (ServiceNo

Our client is currently seeking a Medical Device Quality Systems - Tooling.

Construction Assistant Project Manager Role with $800M General Contractor Based in New Jersey, $500M+ Iconic Project! Fully Covered Benefits, 401K Match and Room for Advancement This Jobot Job is hosted by: Ben Kimbrel Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us

Minimum of 7 years’ experience manufacturing and/or product design (R&D) environment within medical, automotive and aerospace.MUST HAVE CUSTOMER INTERFACE/MANAGEMENT EXPERIENCE.Experience with product design, program/project management, and understanding of tight-tolerance manufactured products is

Assistant Project Manager Role with $800M General Contractor Based in New Jersey, $50M+ Iconic Project! Fully Covered Benefits, 401K Match and Room for Advancement This Jobot Job is hosted by: Ben Kimbrel Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.S

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th