Trust jobs in Los Angeles, California - Page 13Create job alerts

Date Posted: 2026-02-17 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Effector RF Team at Raytheon is seeking a talented Principal Engineer to join our team in Tucson, AZ. The candidate will be responsible for contributing to the architecture, analysis, design, and implementation of RF subsystems and sensors within missile products. The selected candidate will be expected to provide technical expertise, lead small teams, and work with the Engineering organization to establish technology roadmaps, enable modernization, and contribute to general innovation. In addition, the candidate will interface with government personnel and program leadership on a regular basis. The candidate will be responsible for providing expertise, leadership, and subject matter support to RF projects and team members. This position is an onsite role, located in Tucson, AZ. What You Will Do: * Specify, design, and test advanced RF sensors and subsystems across frequencies from MHz through millimeter-wave. * Decompose system-level requirements into detailed RF component requirements. * Measure RF components/sensors/subsystems, including performance in chamber and range environments. * Perform modeling and analysis of link budgets, RF cascades, electromagnetic emissions (EME), antenna patterns, phase noise, receiver sensitivity, transmitter power, spurious signals, modulation, isolation, and ADC characteristics. Qualifications You Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience unless prohibited by local laws/regulations. * A minimum of 8 years of experience to include any combination of the following: * Design, integration, and/or test of RF subsystems * Design, integration, and/or test of RF sensors * Experience interacting across engineering disciplines (e.g. Systems, Mechanical, SW, Algorithms, etc.) to define RF subsystem requirements and evaluate performance Qualifications We Prefer: * Knowledge of RF component technologies, including circuit card assemblies (CCAs), waveguides, planar/printed antennas, RF modules, and/or monolithic microwave integrated circuits (MMICs). * Experience performing Link Budget analyses. * Understanding of antenna patterns and RF measurements with antennas and electronics. * Experience in concepts such as phase noise, mixer conversion spurs, automatic gain control (AGC), sensitivity, intermodulation distortion (IMD), bit error rate, instantaneous bandwidth, adjacent channel interference, and ADC measurements/calculations (Nyquist and SFDR). * Familiarity with equipment such as Spectrum Analyzers, Network Analyzers, Signal Generators, and Arbitrary Waveform Generators (ARB Generators). * Understanding of electromagnetic interference (EMI) and electromagnetic vulnerability (EMV) along with mitigation strategies in RF systems. * Excellent written communication and oral presentation skills. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. This position offers relocation based on candidate eligibility. Learn More & Apply Now! This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-12 Country: United States of America Location: US-AZ-TUCSON-807 ~ 1151 E Hermans Rd ~ BLDG 807 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Hardware Engineering, Shipboard Effectors Department is seeking Mechanical Engineers for our Tucson AZ site supporting full program life cycle, early development, production support, and legacy sustainment activities across the Standard Missile family of programs. This Mechanical Engineering position performs in alignment to expectations in the design, development, and production support areas associated with mechanical designs, validation principles, qualification processes, procurement, and production processes across a design life cycle. Development work may include requirements understanding, concept development, DFMAs, PFMAs, margin analysis, technical data package (TDP) development, application of geometric dimensioning and tolerancing principals, engineering test principals, preparation of technical analysis reports, and presentations in design reviews. This position is onsite in Tucson, Arizona and will support 3rd shift with a schedule of Monday – Friday 11pm -8am and may require up to 10% travel to government supplier and other Raytheon facilities. What You Will Do: • Technical ownership and execution of tasks may be viewed as a prime technical contact in providing solutions to a wide range of complex technical problems related to the design, manufacture, integration, and production sustainment of various mechanical sub-systems both in the engineering lab and the factory floor both at Raytheon Technologies and at suppliers., • Communicate with cross-disciplined engineering team members and suppliers to analyze, model, and document the design technical data package (TDP) and its capabilities and compliance with requirements., • Serves in mentor role to junior engineers, providing technical guidance to others within mechanical discipline., • Work autonomously with limited supervision, acting as the responsible engineer for major hardware subsystem. This often requires the ability to lead small teams of junior engineers, and collaborate across multiple functions and disciplines, such as supply chain, operations, quality, systems, analysis, and electrical., • Perform mechanical design, development, and documentation of components, sub-assemblies, and major end items for defense system equipment in accordance with system requirements., • Collaborate with Raytheon factories and suppliers with new product integration and manufacturing process improvements., • Perform and review tolerance analysis to ensure form, fit, and function are as intended by design for the use-application., • Improve new and existing designs using Design for Manufacture and Assembly (DFMA) and Design for Producibility principles., • Apply knowledge and experience in technical problem solving and hardware development in a fast paced, team environment., • Support production of various mechanical sub-systems at internal factories and suppliers., • Support first hardware builds and first article inspections., • Review manufacturing process instructions and support material review board dispositions., • Perform root cause investigations on hardware of production related issues. Qualifications You Must Have: • Typically requires a bachelor’s degree in science, Technology, Engineering, and Mathematics (STEM) and a minimum of 5 years of prior relevant experience. An Advanced Degree in a related field and minimum 3 years’ experience., • Five years of work experience in mechanical design and design documentation., • The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Value: • Advanced degree in an Engineering discipline, • Leadership experience with small teams (4-6 people), • Supplier interaction and supplier management experience, • Ability to work in teams or independently, flexible, demonstrates initiative, • Experience in mechanical sub-systems packaging, materials, thermal, structural analysis, energetics principles, control systems, interconnect, airframe, or large assembly development, • Strong interpersonal and communication skills; both verbal and written, • Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5, • Experience with CREO (Pro/E) or similar 3D solid modeling software, • Experience with PTC Windchill Product Data Management or equivalent configuration/data management software, • Mechanical aptitude to provide solutions to a variety of technical problems of moderate scope and complexity., • Ability to travel to government and supplier facilities in support of program activities, • Active DoD issued security clearance What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! • Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-12 Country: United States of America Location: US-AZ-TUCSON-807 ~ 1151 E Hermans Rd ~ BLDG 807 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Hardware Engineering, Shipboard Effectors Department is seeking Mechanical Engineers for our Tucson AZ site supporting full program life cycle, early development, production support, and legacy sustainment activities across the Standard Missile family of programs. This Mechanical Engineering position performs in alignment to expectations in the design, development, and production support areas associated with mechanical designs, validation principles, qualification processes, procurement, and production processes across a design life cycle. Development work may include requirements understanding, concept development, DFMAs, PFMAs, margin analysis, technical data package (TDP) development, application of geometric dimensioning and tolerancing principals, engineering test principals, preparation of technical analysis reports, and presentations in design reviews. This position is onsite in Tucson, Arizona and will support 2nd shift with a schedule of Monday - Friday 3pm - 12am and may require up to 10% travel to government supplier and other Raytheon facilities. What You Will Do: • Technical ownership and execution of tasks may be viewed as a prime technical contact in providing solutions to a wide range of complex technical problems related to the design, manufacture, integration, and production sustainment of various mechanical sub-systems both in the engineering lab and the factory floor both at Raytheon Technologies and at suppliers., • Communicate with cross-disciplined engineering team members and suppliers to analyze, model, and document the design technical data package (TDP) and its capabilities and compliance with requirements., • Serves in mentor role to junior engineers, providing technical guidance to others within mechanical discipline., • Work autonomously with limited supervision, acting as the responsible engineer for major hardware subsystem. This often requires the ability to lead small teams of junior engineers, and collaborate across multiple functions and disciplines, such as supply chain, operations, quality, systems, analysis, and electrical., • Perform mechanical design, development, and documentation of components, sub-assemblies, and major end items for defense system equipment in accordance with system requirements., • Collaborate with Raytheon factories and suppliers with new product integration and manufacturing process improvements., • Perform and review tolerance analysis to ensure form, fit, and function are as intended by design for the use-application., • Improve new and existing designs using Design for Manufacture and Assembly (DFMA) and Design for Producibility principles., • Apply knowledge and experience in technical problem solving and hardware development in a fast paced, team environment., • Support production of various mechanical sub-systems at internal factories and suppliers., • Support first hardware builds and first article inspections., • Review manufacturing process instructions and support material review board dispositions., • Perform root cause investigations on hardware of production related issues. Qualifications You Must Have: • Typically requires a bachelor’s degree in science, Technology, Engineering, and Mathematics (STEM) and a minimum of 5 years of prior relevant experience. An Advanced Degree in a related field and minimum 3 years’ experience., • Five years of work experience in mechanical design and design documentation., • The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Value: • Advanced degree in an Engineering discipline, • Leadership experience with small teams (4-6 people), • Supplier interaction and supplier management experience, • Ability to work in teams or independently, flexible, demonstrates initiative, • Experience in mechanical sub-systems packaging, materials, thermal, structural analysis, energetics principles, control systems, interconnect, airframe, or large assembly development, • Strong interpersonal and communication skills; both verbal and written, • Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5, • Experience with CREO (Pro/E) or similar 3D solid modeling software, • Experience with PTC Windchill Product Data Management or equivalent configuration/data management software, • Mechanical aptitude to provide solutions to a variety of technical problems of moderate scope and complexity., • Ability to travel to government and supplier facilities in support of program activities, • Active DoD issued security clearance What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! • Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

We are a fast-paced business with ambitious growth plans; so if you are dedicated, enthusiastic and always seeking ways to improve, you'll enjoy a career with us! Job Description ASSEMBLER II- Second Shift 2:30-11:00 PM PST POSITION PURPOSE: This position is responsible for assembling and manufacturing simple to moderate complexity products (such as sub assemblies, assemblies used in DC lighting ) for aircraft. The key to success in this position is the delivery of on time quality parts by assuring precise conformance to specifications, workmanship standards and customer requirements. In addition to the technical skills required, the ultimate foundation of the Assembly Department is teamwork and displaying certain behaviors to support the success of the team. Key behaviors include team work, trust, respect for co-workers, consensus building and integrity. We approach challenges willingly and consider continuous improvement a daily part of the job. ESSENTIAL FUNCTIONS AND BASIC DUTIES FOR THIS JOB • Build assemblies per work instructions, blueprints and specifications daily, • Perform in-process testing as required, • Perform Quality Workmanship, • Recommend work instruction changes to manufacturing outline as needed, • Meet daily production assignments., • Ability and desire to learn new products PERFORMANCE MEASUREMENTS: • New product support/ participation, • Teamwork, • Keeping commitments, • Scrap Rate/and or Rework QUALIFICATIONS : Education/Certification: General knowledge equivalent to high school education. Required Knowledge: • Aerospace manufacturing environment desired., • Ability to read and comprehend blueprints, specifications and schematics desired, • Capable of using all standard measuring tools (i.e. mics/indicators/height gauges/etc.)., • Finger Dexterity: Hand eye coordination, steady hands, ability to operate shop equipment., • Talking: Clear verbal communication in English, • Visual abilities: Must be able to identify colors and read minimum of 8-point font WORKING CONDITIONS The key physical requirements of this position include regular attendance, 50%walking or standing in production areas, some sitting, pushing, reaching overhead and bending to the floor. Compensation Pay Range $21-$25/hour, based on experience Please click here to review Ontic's California Consumer Privacy Act policy. Ontic Engineering and Manufacturing Inc. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person " as defined by 22. C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, asylee, or refugee.

Date Posted: 2026-04-29 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Production Test Engineers (PTE) are part of a manufacturing team who support the test process through one or more phases of the product life cycle, including product development, transition to production, sustained production and depot activities. PTE validates and ensures compliance of the prime hardware to technical data package requirements and supporting test equipment. Performs troubleshooting and problem solving of test failures. Identifies opportunities in test processes to improve efficiency, yields, and capacity. What You Will Do Troubleshoot and provide accurate rework instructions for the product hardware. Creation and maintenance of spares and the test equipment obsolescence plan. Creation of Basis of Estimates (BOE) to estimate costs to add additional capacity, new capabilities and equipment obsolescence. Lead projects to reduce test time, improve the test process through analysis of predictive metrics of trends, failure modes, and test yields. Develop test flows and contribute to test capacity analysis. Maintain changes to the test equipment technical data package which includes drawings, test instructions, test position manuals, and system software. Assist in non-routine fault isolation, diagnosis and repair of the product or test equipment. Lead root cause and corrective action investigations and present findings, utilizing fault trees and knowledge point plans. Perform risk assessments and supports the programs risk register reviews. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience. Experience in a manufacturing environment. Ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF). Qualifications We Prefer Experience with hands-on hardware integration and troubleshooting Experience in Manufacturing environment Experience with technical writing Excellent interpersonal skills Excellent written and verbal communication skills Ability to multitask in a fast-paced environment Ability to develop sustaining solutions to routine technical problems Ability to lead and mentor newer PTE's Experience with interpretation of technical documentation Experience with data analysis What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-09 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date We're growing fast and we want you to grow with us! We're expanding our engineering organization dramatically to meet exciting customer demand, and we're actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required — we'll invest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career. At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's Hardware Electrical Engineering Team is looking for junior level engineers who have electronics knowledge to support electrical products and systems through design, test and/or sustainment activities. We are looking for candidates who are eager to collaborate, innovate, and work alongside our talented engineering teams. In this role, you will leverage advanced technologies to create cutting-edge solutions for sensor and effector products. You will partner with experienced, multidisciplinary teams to help define requirements, support architecture development, execute detailed design and simulations, and perform integration and verification tasks. What You Will Do • As a Power & Analog Design Engineer II, your responsibilities will include the following:, • Support the design, analysis, test, and/or document of electronic circuits., • Support integration and verification activities in engineering laboratories., • Provide product test and troubleshoot support., • Understand and report execution status to the planned budget and schedule., • Function as an individual contributor., • Clearly present your work product to leadership., • Engage in professional growth and development. Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 2 years’ prior relevant experience or an Advanced Degree in a related field., • Education or experience with any of the following: RF, power, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing., • Education or experience with analog laboratory equipment such as waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers., • Education or experience with simulation software for circuit analysis or modeling. Qualifications We Value • Degree in Electrical Engineering, • Education or experience in Root-Cause Corrective Action investigations, • Education or experience performing analog electrical engineering design., • Education or experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), SABER RD, SIMPLIS, or xDX Designer., • Design and/or Analysis education or experience with analog electronics design, including at least one of the following: Power supply topologies (buck, boost, buck-boost), FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits., • Education or experience with subsystems integration and test, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Education or experience supporting or executing Electronics CAD layouts for printed wiring or circuit boards., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support., • Desire to lead design efforts and/or small teams., • Ability to communicate project status with program leadership and/or customers. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! Please consider the following role type definition as you apply for this role. • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-02-20 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Test Equipment Engineering (TEE) includes engineering disciplines responsible for systems design & test with every Raytheon product. Our engineers are responsible for all elements of the development lifecycle for test including: test requirements, test system design, flight simulations, hardware-in-the-loop, computer-in-the-loop, advanced engineering prototyping technology, flight operations for manned and unmanned vehicles, environmental testing, environmental characterization and engineering laboratory management. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. As part of the Test Environment Support Administration (TESA) team, you be working with both leading-edge technologies and legacy systems to support multiple products and programs throughout Raytheon. You will provide Test Equipment (TE) integration, security consultation, troubleshooting, sustainment, and compliance with the ultimate responsibility to maintain test integrity and the availability of our test systems. This position is 100% ONSITE in Tucson, Arizona. What You Will Do * Provide Cybersecurity compliance guidance to engineering for production and procurement of Test Equipment (TE) * Support Flight Test capabilities and processes for Raytheon test systems * Develop Cybersecurity compliant TE (Linux, IOS, Windows) * Install software packages/updates to enhance operations and testing of production hardware * Troubleshoot production and development TE to ensure connectivity, functionality, compliance, and test integrity * Collaborate with Digital Technologies to integrate TE to controlled networks or enterprises * Collaborate with Cybersecurity to ensure TE compliance (using tools such as Nessus, Splunk, Ivanti, and locally procured software * Collaborate with engineering to ensure changes do not affect the availability or test integrity on TE * Support any and all reviews required prior for implementation of any changes to the TE Qualifications You Must Have * Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) * Minimum five (5) years of relevant experience with systems administration of Linux, Networking, and/or Windows (in desktop or server environments) * Experience with user account management, software installation and/or technical customer support * US Citizen - Active, current and transferable U.S. government issued DoD security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer * DoD 8570.01m IAT II certified credentials (Sec+, CISM, etc.) * Experience as a System Engineer with an understanding of managing Operational Technology and/or test systems in a production environment * Experience working in a classified environments to include Special Access Programs * Troubleshooting ability with all Microsoft Windows and Linux systems * Customer service and training skills, including oral and technical written communications, * Independent problem-solving ability of hardware/software issues What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. This position offers relocation. Learn More & Apply Now! Please consider the following role type definitions as you apply for this role: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. Tucson, AZ: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Test Equipment Engineering (TEE) team within the Hardware Discipline Center is a multi-discipline organization responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state of the art software solutions with the most advanced engineering systems in the world. TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. This position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for Raytheon weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: • Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS)., • Prioritize and handle multiple software engineering tasks concurrently., • Troubleshoot software and test equipment instrumentation., • Work in a multidiscipline engineering team environment ., • Develop and derive requirements for software products . Qualifications You Must Have: • Master’s Degree in Science, Technology, Engineering, or Mathematics (STEM)., • This position requires 12 months or less of professional experience (excluding internships)., • Experience in developing software applications using programming languages including but not limited to C++, C#, Java, Python or Visual Basic., • Experience with Windows Operating System and Microsoft Visual Studio is required. Qualifications We Prefer: • Experience in utilizing debugging tools to troubleshoot software implementation and ensure integrity of the software products, • Knowledge in common computer hardware interface and data protocols such as TCP/IP or UDP, • Knowledge of software development lifecycles, such as Waterfall and Agile, • Knowledge of Software Configuration Management principles, • 3.0 cumulative GPA desired What We Offer: • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! • Please consider the following role type definition as you apply for this role., • Onsite: Employees who are working in Onsite roles will work 100% onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Land & Shipboard Effector Guidance Systems (LSEGS) Department is responsible for the delivery of affordable and innovative electrical products. Accountable for program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of our Land and Naval based electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Enhance electrical engineering skills working with digital, analog and/or RF hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Prior hands-on troubleshooting experience is preferred., • Collaborate and coordinate with Operations, Supply Chain, Quality, and other Engineering disciplines to achieve/document concurrence and resolve issues that may arise during production, testing, and integration., • Travel Requirements: less than 10% annually, • Shift Information: 2nd shift (3pm - 12am) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve a RTX Core Certification and receive Raytheon Responsible Engineer Authority (REA) Training Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 8 years’ prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing, • Familiarity with laboratory equipment including waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers, • Experience with leading technical projects, failure investigations, or issue resolution efforts Qualifications We Prefer • Experience in Root-Cause Corrective Action investigations, • Experience performing electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer., • Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems., • Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday 2nd shift (3pm - 12am), • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-02 Country: United States of America Location: US-AZ-TUCSON-928 ~ 1151 E Hermans Rd ~ MULTI PURPOSE FAC 928 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: Secret - Current Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air Launched Effectors Department is currently searching for Mechanical Engineers to work on multi-disciplined teams supporting the design and/or production support of Air Launched Effectors products and subsystems. These products support US Government and international customers. These positions support product lines based in Tucson, AZ, and may require domestic and international travel to suppliers, Raytheon facilities, and customer sites. This position will be an onsite role. What You Will Do * Technical ownership and execution of tasks, and may be viewed as a prime technical contact in providing solutions to a wide range of complex technical problems related to the design, manufacture, integration, and production sustainment of various mechanical sub-systems both in the engineering lab and the factory floor both at Raytheon Technologies and at suppliers. * Communicate with cross-disciplined, engineering team members and suppliers to analyze, model, and document the design technical data package (TDP) and its capabilities and compliance with requirements. * Serves in mentor role to junior engineers, providing technical guidance to others within mechanical discipline. * Work autonomously with limited supervision, acting as the responsible engineer for major hardware subsystem. This often requires the ability to lead small teams of junior engineers, and collaborate across multiple functions and disciplines, such as supply chain, operations, quality, systems, analysis, and electrical. * Perform mechanical design, development, and documentation of components, sub-assemblies, and major end items for defense system equipment in accordance with system requirements. * Collaborate with Raytheon factories and suppliers with new product integration and manufacturing process improvements. * Perform and review tolerance analyses to ensure form, fit, and function are as intended by design for the use-application. * Improve new and existing designs using Design for Manufacture and Assembly (DFMA) and Design for Producibility principles. * Apply knowledge and experience in technical problem solving and hardware development in a fast paced, team environment. * Support production of various mechanical sub-systems at internal factories and suppliers. * Support first hardware builds and first article inspections. * Review manufacturing process instructions and support material review board dispositions. * Perform root cause investigations on hardware of production related issues. The Sr. Mechanical Engineer - ALE - Strategic Strike job is in Tucson, AZ and the position is onsite. Qualifications You Must Have * Typically requires A University Degree or equivalent experience and minimum 5 years prior relevant experience, or An Advanced Degree in a related field and minimum 3 years experience * Experience in mechanical design and design documentation. * Experience in Geometric Dimensioning and Tolerancing (GD&T) per ANSI Y14.5 * Experience with CREO (Pro/E) or similar 3D solid modeling software Qualifications We Prefer * Bachelor's Degree in Science, Technology, Engineering, and Mathematics (STEM) * Mechanical aptitude to provide solutions to a variety of technical problems of moderate scope and complexity. * Leadership experience with small teams (4-6 people) * Supplier interaction and supplier management experience * Ability to work in teams or independently, flexible, demonstrates initiative * Experience in mechanical sub-systems packaging, materials, thermal, structural analysis, energetics principals, control systems, interconnect, airframe, or large assembly development * Strong interpersonal and communication skills; both verbal and written * Experience with PTC Windchill Product Data Management or equivalent configuration/data management software * Ability to travel to government and supplier facilities in support of program activities What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. #LI-SM4 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-01 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air Launched Effector Guidance Systems (ALEGS) Department is responsible for the delivery of affordable and innovative electrical products. The ALEGS Department is currently hiring MST Technical Lead position in Tucson, AZ to assist with program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of airborne electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Lead others by understanding team dynamics and capitalizing on team strengths while mitigating gaps, • Lead trade studies to determine the best solution and plan forward for solving complex problems while considering quality, cost, schedule, and performance, • Regularly conveying task status on complex issues and strategic plans across multiple teams, program, department, and customer leadership, • Seeking opportunities to fill any role necessary to help ensure business unit success, • Partner with the program team to ensure cost, schedule, and technical requirements are fully integrated and executed as planned Qualifications You Must Have: • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 8 years’ prior relevant experience, • Experience with any of the following as it relates to Electrical subsystems and/or Circuit Card Assembly: Development, Integration, Test Production support, • Experience with analog, digital and/or mixed signal circuit design/analysis or hardware integration/test, • Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Value: • Experience in design, test and sell off military systems, • Demonstrated ability to work with a complex engineering team, • Solid understanding of hardware testing methodologies, • Experience in Root-Cause Corrective Action investigations and FRACAS processes, • Knowledge and experience with Material Review Board, Process Configuration Board, Configuration Control Board and Failure Review Board processes, proposing/defending and implementing Change Notices, • Experience in resolving production issues with suppliers and sub-tier suppliers, • A minimum of 6 years of experience in the assembly, integration and test of EO and RF subsystems, • Mentor Graphics DxDesigner experience and command of circuit simulation and analysis tools such as PSPICE, System Vision, • Knowledge of printed circuit board fabrication and circuit card assembly processes and related industry specifications, • Familiarity with missile communication transceivers and data links, IR or RF sensors, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems, • Planning and leading hardware subsystem development activities, • Experience managing cost and schedule with Earned Value Management methodologies, • Technical writing and/or formal presentation experience, • Master’s degree in STEM or MBA What We Offer: • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday - Friday, • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2025-12-15 Country: United States of America Location: AZ852: RMS AP Bldg M02 1151 East Hermans Road Building M02, Tucson, AZ, 85756 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's Effector Analog & Power (EAP) Team is looking for junior to mid-level engineers who have power electronics knowledge to help design robust power systems. The Effector Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operates in lower power and voltage ranges less than 10kW and 1000V. What You Will Do • Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications., • Assist in architecting at the circuit card level., • Help to see circuit card development through its design phases, from requirements definition through initial integration testing., • Drive to meet schedule concerns. Define schedules for circuit level tasking., • Guide ECAD drafters through layout and routing activities, with moderate support from senior engineers. Assist in layer stackup definition., • Function as an individual contributor. Understand the role of a small team lead and engage in personal technical growth., • Clearly present your work product to functional and program leadership. Qualifications You Must Have • Bachelor’s degree in science, Technology, Engineering, or Mathematics (STEM), • Typically requires a minimum of 2 years prior relevant experience, • Design, analysis, test, and/or simulation experience with one or more of the following non-isolated converter topologies: buck, boost, buck-boost., • Experience using tools such as MATLAB, MathCAD, Mathematica, or other similar tools., • Design and/or Analysis experience with analog electronics design, including at least one of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits. Qualifications We Prefer • An advanced degree in Electrical Engineering., • Design and analysis experience with analog or digital power converter design., • Experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation., • Experience communicating and documenting technical topics at the small team level., • Experience in any one of the following:, • Acting as a liaison between program and functional management in a cross-matrixed organization, • Military specifications, • Design considerations for voltages > 400V and/or power > 10kW. Three-phase power systems, power factor control, and inverter/rectifier development, • Circuit simulator SIMPLIS, system simulator SABER, and/or analysis tool Mathcad., • Mentor Graphics DxDesigner, and/or Hyperlynx. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation: This role is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role., • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Location Info As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air Launched Effector Guidance Systems (ALEGS) Department is responsible for the delivery of affordable and innovative electrical products. The ALEGS Department is currently hiring a Sr. Electrical Engineer - Effector Guidance Systems position in Tucson, AZ to drive program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of airborne electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Collaborate with Operations, Supply Chain, Quality, and other Engineering disciplines to resolve issues that may arise during production, testing, and integration., • Qualified candidates must have experience with digital, analog and/or RF testing and experience debugging complex circuit card assemblies or electro-mechanical systems. Knowledge of RF / microwave devices preferred., • Travel Requirements: less than 10% annually, • Shift Information: 2nd Shift (3pm - 12am) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve an RTX Core Certification and a Raytheon Responsible Engineer Authority (REA) Certification Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 5 years prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing., • Electronics circuit troubleshooting and/or failure investigation Qualifications We Prefer • Experience performing electrical engineering design of CCA, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with electrical engineering design tools such as: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS),, • Experience with electronics test equipment such as: Signal Generator, Oscilloscope, network analyzer, and Spectrum Analyzer., • Test problem investigation experience, • Experience in applying Statistical Process Control (SPC) methods in achieving production yield improvements., • Experience in resolving production issues and oversight of suppliers and sub-tier suppliers., • Technical writing and formal presentation experience, • Leadership of small technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support., • Ability to perform work with autonomy and little oversight What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday 2nd Shift (3pm - 12am), • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We're accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role The Manufacturing Engineer, Supply Chain (Special Processes) supports the supply chain team and global commodity strategy by driving process optimization, technology development and continuous improvement initiatives with suppliers to drive world-class performance in quality, cost and delivery. The role engages with cross-functional teams to ensure supplier production capabilities and capacity exist to support NPI execution and readiness for business growth. The ideal candidate will have deep expertise in industrial engineering and be passionate about manufacturing process improvement. A core element of being effective in the role will be influencing and gaining the respect of supplier executives; therefore, it will be critical to be able to articulate complex manufacturing concepts in a relatable way that gains buy-in and support. What You'll Do Your responsibilities will include, but are not limited, to the following: \n • Develop global supplier development systems and processes to support Hadrian supply chain.\n, • Own and manage supplier development activities, primarily for special process commodities (primarily surface finishing/coating).\n, • Create supplier capability and technology road maps in collaboration with commodity manager and supplier leadership.\n, • Act as primary technical liaison between suppliers and internal teams for assigned commodities owning the supplier side DFM process and communicating process capability and any associated risk to meeting customer requirements.\n, • Assess suppliers' production capabilities, processes, facilities, workforce for inclusions on AVL and in commodity strategy.\n, • Streamline full value chain for lead time reduction and production optimization\n, • Conduct supplier diagnostic process to identify and remedy failure modes when supply continuity is at risk.\n, • Build trust and influence with supplier teams and be able to adapt communication and engagement styles to all levels of an organization.\n, • Own capacity assessments, monitoring and expansion at suppliers to support Hadrian demand and long-term forecast.\n, • Identify suppliers with potential for deep partnership\n, • Develop and own APQP process and ensure successful PPAP in co-operation with SQE.\n, • Support SQE with root cause analysis and be responsible for closing the loop on corrective and preventative actions.\n\n What We're Looking For \n • Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering or a related discipline or equivalent practical experience.\n, • 8+ years of experience in manufacturing engineering, industrial engineering or supply chain engineering (SQE, SDE, STM etc.)\n, • Expertise in various root cause analysis and problem-solving techniques with the ability to choose / recommend the appropriate tool for the situation.\n, • Proven capabilities in manufacturing process improvement through demonstrated excellence.\n, • Prior experience assessing supplier capabilities and influencing commodity managers / strategies.\n, • Can take complex solutions and simplify them into actionable insights for all levels of an organization\n, • Familiarity with Geometric Dimensioning & Tolerancing (GD&T) and advanced metrology.\n, • Ability to travel domestically 40-50% of the time working in a shop floor environment.\n\n What Will Set You Apart \n • Deep knowledge of aerospace and defense surface finishing specifications, processes and technologies.\n, • Six Sigma Master Black Belt certification.\n For this role, the target salary range is $105,000 - $190,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits \n • Medical, dental, vision, and life insurance plans for employees\n, • 401k\n, • Relocation support may be provided for certain situations, based on business need.\n, • Flexible vacation policy\n\n ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . Hadrian Is An Equal Opportunity Employer It is the Company's policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air Launched Effector Guidance Systems (ALEGS) Department is responsible for the delivery of affordable and innovative electrical products. The ALEGS Department is currently hiring a Sr. Electrical Engineer - Effector Guidance Systems position in Tucson, AZ to drive program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of airborne electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Collaborate with Operations, Supply Chain, Quality, and other Engineering disciplines to resolve issues that may arise during production, testing, and integration., • Qualified candidates must have experience with digital, analog and/or RF testing and experience debugging complex circuit card assemblies or electro-mechanical systems. Knowledge of RF / microwave devices preferred., • Travel Requirements: less than 10% annually, • Shift Information: 1st Shift What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve an RTX Core Certification and a Raytheon Responsible Engineer Authority (REA) Certification Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 5 years prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing., • Electronics circuit troubleshooting and/or failure investigation Qualifications We Prefer • Experience performing electrical engineering design of CCA, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with electrical engineering design tools such as: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS),, • Experience with electronics test equipment such as: Signal Generator, Oscilloscope, network analyzer, and Spectrum Analyzer., • Test problem investigation experience, • Experience in applying Statistical Process Control (SPC) methods in achieving production yield improvements., • Experience in resolving production issues and oversight of suppliers and sub-tier suppliers., • Technical writing and formal presentation experience, • Leadership of small technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support., • Ability to perform work with autonomy and little oversight What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday, • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-12 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Are you someone that has a passion for working in the aerospace and defense industry on products that are on the cutting edge of technology? Are you an individual that has a desire to lead a team in a fast-paced environment that delivers products that protect the warfighter? Do you want to be a part of a department that challenges you, grows your skills, and intentionally provides new opportunities across programs to influence product architecture? If the answer is yes to these questions, we’d like to talk to you about your career. The Hardware Engineering Shipboard Effectors Department is seeking Mechanical Engineers for our Tucson AZ site supporting the Standard Missile portfolio production line. This Mechanical Engineering position performs in alignment to expectations in the design, development and production support areas associated with mechanical designs, validation principles, qualification processes, procurement, and production processes across a design life cycle. Development work may include requirements understanding, concept development, DFMAs, PFMAs, margin analysis, technical data package (TDP) development, application of geometric dimensioning and tolerancing principals, engineering test principals, preparation of technical analysis reports, and presentations in design reviews. This Role is 100% On-Site, supports 2nd shift with a schedule of Monday - Friday 3pm - 12am, and may require up to 10% travel to government and supplier facilities. What You Will Do • Execution of tasks related to Design, Manufacturing and Integration of mechanical sub-systems, • Advising technical leadership based on data driven conclusions, • Production support of various internal mechanical sub-systems, • Supplier Support for mechanical sub-systems, • First article inspections at suppliers, • Work instruction reviews, • Material dispositions, • Root cause investigations into production and design issues, • Supporting engineering assembly hardware builds, • Ensuring that you are completing tasks within the budget and schedule provided Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience., • Two (2) years of experience in mechanical design and design documentation, • The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance Qualifications We Prefer • Four (4) years of professional experience, or an Advanced Engineering Degree, related to mechanical design and documentation in Aerospace & Defense industry, • Experience with CREO (Pro/E) or similar 3D solid modeling software, • Experience with PTC Windchill Product Data Management or equivalent configuration/data management software, • Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5, • Experience in mechanical sub-systems packaging, materials, thermal, structural analysis, tolerance analysis, energetics principles, control systems, interconnect, airframe, or large assembly development, • Strong interpersonal and communication skills; both verbal and written, • Mechanical aptitude to provide solutions to a variety of technical problems of moderate scope and complexity What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! • Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-25 Country: United States of America Location: US-AZ-TUCSON-M07 ~ 3292 E Hemisphere Loop ~ BLDG M07 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. We deliver solutions that help our nation and allies defend freedoms and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. About Us At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Energetics and Propulsion Department is an engineering organization in the Hardware Engineering Directorate. This Department is responsible for the full spectrum of warhead, fuzing, and propulsion designs/technology, including power systems, ignition, and all other weapon initiation safety systems technology. An individual in this role will be expected to work with a product team and functional subject matter experts to develop architectures, top level design concepts, requirements, and manage production efforts for a variety of one shots devices (i.e. initiators, gas generators, pyroswitches, explosive bolts). This position is an onsite role located in Tucson, Arizona. What You Will Do • Apply and/or develop advanced one shot devices technologies using scientific principles, theories and concepts implementation into products, • Provide technical oversight to various subcontractors, • Manage subcontract suppliers to specify and deliver required subsystem components on schedule and on budget, • Frequently interface with the customer to identify user needs, • Commitment to program schedule and budget, • Supplier collaboration experience and oversight generating specifications and statements of work (SOW), • Technical oversight of our power source batteries development programs, • You will ensure two-way communication management; serve as the day-to-day liaison to the programs concerning resource technical assignments, • Support failure analysis and corrective action through redesign of failed one shot device components or systems, • Present one shot device design models and supporting analyses/test results to internal and customer review meetings, • Support proposals requiring one shots technologies, • Support development of Critical Item Development Specifications (CIDS), • Proposal and cost preparation, requirements definition, and one shot device subsystems analysis, test and verification; operational test support; supplier collaboration, • Willingness to travel, including international, to provide supplier support Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations., • Eight (8) years of experience in fuzing / one shots / engineering technology and/or engineering design, • Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer • Advanced degree, • Ten (10) or more years of directly related experience in one shot devices and their applications, • Directly related experience in one shots subsystems design, development, and test, • Experience in working with and managing one shot suppliers, • Experience in One-Shot component designs, ability to evaluate performance data, capable of evaluating MIL-DTL-23659 compliance, and creation of technical data packages, • Experience in business development and technology road mapping, • Excellent written and verbal skills, • Active Secret or Top Secret Clearance (Department of Defense) Learn More & Apply Now RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses – Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA. What We Offer: * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Whether you’re just starting out on your career journey or are an experienced professional, we offer a robust total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement and work/life benefits; career development and recognition programs. Some of the superior benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. #LI-ST1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Land & Shipboard Effector Guidance Systems (LSEGS) Department is responsible for the delivery of affordable and innovative electrical products. Accountable for program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of our Land and Naval based electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Enhance electrical engineering skills working with digital, analog and/or RF hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Prior hands-on troubleshooting experience is preferred., • Collaborate and coordinate with Operations, Supply Chain, Quality, and other Engineering disciplines to achieve/document concurrence and resolve issues that may arise during production, testing, and integration., • Travel Requirements: less than 10% annually, • Shift Information: 2nd shift (3pm-12AM) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve a RTX Core Certification and receive Raytheon Responsible Engineer Authority (REA) Training Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 2 years’ prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing, • Familiarity with laboratory equipment including waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers Qualifications We Prefer • Experience in Root-Cause Corrective Action investigations, • Experience performing electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer., • Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems., • Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday, • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-16 Country: United States of America Location: US-AZ-TUCSON-805 ~ 1151 E Hermans Rd ~ BLDG 805 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Systems Engineering and Test Capabilities (SETC) organization is currently hiring a Principal Systems Engineer to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, Chief Engineers, Chief Technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters! As a Principal Systems Engineer you will be responsible for technical rigor of requirements documents, coordination across teams, sharing program process knowledge, mentoring engineers, and working with the technical and program leads execute program tasks. Responsibilities include, but are not limited to, requirements management, requirements development, or integration and test activities with a focus on software intensive products. In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus with the possibility of occasional travel. What You Will Do * Update, maintain, and improve requirements and requirements documentation for development and production efforts * Perform and execute integration, verification and testing and/or provide Systems Engineering support during the test. * Support system performance analysis, and Integration and Test * Model the system and the system development and production processes using Cameo * Participate in Failure Investigations * Conduct Trade Studies and present results to customers * Perform test planning to develop and implement test plans, and procedures. * Prepare integration and verification documentation in both simulated and real-world environments * Create and present technical data for design reviews and in preparation for test events. * Troubleshoot and analyze hardware, software, and system issues through detailed data analysis and debugging. * Conduct statistical and numerical analysis of test data to ensure optimal system performance and to verify requirements. * Support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations Qualifications You Must Have * Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 8 years of prior engineering experience. * Experience in Systems Engineering and/or Systems Integration and Test * Experience in Model-Based Systems Engineering (MBSE), Requirements Development, Requirements Management, Requirements Verification, or Integration and Test for software products Qualifications We Prefer * Masters or PhD in Engineering, Math or Physics * Experience using Agile framework development methods / processes * Experience with Agile, Model-Based Systems Engineering (MBSE), and/or Digital Engineering * Experience presenting analytical and technical presentations * Experience evaluating and mitigating technical risks * A self-starter who can take on task with limited guidance * Customer focus and collaboration skills * Experience with performance analysis * Experience with DOORS and/or cPDM * Ability to perform trade studies to optimize system performance * Understanding of Systems Engineering Product Development Cycle * Familiarity with system safety, reliability, and configuration management * Experience working in an integration lab, test facility, or in the field supporting integration and/or verification. * Experience evaluating systems using simulated environments * Experience generating technical documentation such as trade studies, test plans, procedures or technical reports. * Experience in integration with test equipment, telemetry data analysis tools, and missile systems host platforms * Experience in Earn Value Management System (EVMS) and Cost Account Management (CAM) What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation Eligible – Relocation assistance is available Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. * This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: * This position is an onsite role – Tucson, AZ: * We Are RTX As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air Launched Effector Guidance Systems (ALEGS) Department is responsible for the delivery of affordable and innovative electrical products. The ALEGS Department is currently hiring a Principal Electrical Engineer - Effector Guidance Systems position in Tucson, AZ to drive program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of airborne electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Collaborate with Operations, Supply Chain, Quality, and other Engineering disciplines to resolve issues that may arise during production, testing, and integration., • Qualified candidates must have experience with digital, analog and/or RF testing and experience debugging complex circuit card assemblies or electro-mechanical systems. Knowledge of RF / microwave devices preferred., • Travel Requirements: less than 10% annually, • Shift Information: 2nd Shift (3pm - 12am) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve an RTX Core Certification and a Raytheon Responsible Engineer Authority (REA) Certification Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 8 years’ prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing., • Electronics circuit troubleshooting and/or failure investigation, • Experience managing and/or leading Engineering teams in a technical capacity. Qualifications We Prefer • Experience in design, testing and sell off military systems, • Demonstrated ability to work with a complex engineering team, • Solid understanding of hardware testing methodologies, • Experience in Root-Cause Corrective Action investigations and FRACAS processes, • Knowledge and experience with Material Review Board, Process Configuration Board, Configuration Control Board and Failure Review Board processes, proposing/defending and implementing Change Notices, • Experience in resolving production issues with suppliers and sub-tier suppliers, • Knowledge of printed circuit board fabrication and circuit card assembly processes and related industry specifications, • Familiarity with missile communication transceivers and data links, IR or RF sensors, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems, • Planning and leading hardware subsystem development activities, • Technical writing and/or formal presentation experience, • Leadership of small technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday 2nd Shift (3pm - 12am), • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-24 Country: United States of America Location: US-AZ-TUCSON-827C ~ 1151 E Hermans Rd ~ BLDG 827C (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Do you have a passion for LO technology? Do you have a passion for Stealth Materials Engineering? If you answered "yes" to these questions, our mechanical design team at our Tucson, AZ, facility wants to hear from you! Raytheon is an industry leader in Stealth Technology. We are involved in all phases of development, production, and maintenance of Low Observable (LO) weapon systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state of the art technical projects. We are seeking Signature Management (Low Observable) Materials Subject Matter Expert to join the Airframes, Radar Structures, & Advanced Materials team. This design team is committed to excellence supporting our customers and allies worldwide. This will be onsite at our Tucson location. What You Will Do * You will be responsible for material and process development, characterization and system level integration in support of all Raytheon product lines and new business. * Material performance predictions and measurement tests of developmental and production systems. * You will be expected to perform material measurements of constitutive and RF attenuation properties and generate predicted material performance using Computational Electromagnetic Codes (CEM) tools. * You will work in integrated product teams to incorporate advanced signature control techniques into deliverable products and aid in the assessment of system performance. * Material formulation and development * Fabrication process development * Composites operations support * Material testing and characterization (RF, mechanical, physical) * Preparation of engineering documentation * Customer and supplier interface * Participation/leadership of and program reviews * Project management * Mentor early career engineers. * Strong ownership of tasks; ability to function as Materials Lead on Integrated Product Teams Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. * Ten (10) years of Low Observables or Radar materials engineering experience OR Seven (7) years with related experience and advance degree. * Experience in any of the following: Material characterization, or performance testing and/or prediction, and/or design experience, material down-select and/or integration on to air vehicle. * Customer and supplier collaboration experience Qualifications We Prefer * Master’s degree in Science, Technology, Engineering, or Mathematics (STEM) * High temperature LO materials characterization, testing, and integration * Experience with intrinsic property analytical techniques for the electromagnetic characterization of material. * Competence in utilizing thermal analysis techniques (DMA, TMA, TGA, DSC) properties. * Agile communicator, with effective interaction style that fosters collaboration with a multi-disciplined team, suppliers, and customers. * Skilled at planning, prioritizing, and executing projects/programs to successful completions. * Proposal Writing and Basis of Estimate (BOE) development experience. * CAD software proficiency and technical programming experience (Python, C++, MATLAB, etc.) * Experience with Infrared signature analysis and control. * A current active U.S. Government in-scope DoD Top Secret security clearance with the ability to obtain and maintain Special Program Access (SAP). What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

We are a fast-paced business with ambitious growth plans; so if you are dedicated, enthusiastic and always seeking ways to improve, you'll enjoy a career with us! Job Description ASSEMBLER II- Second Shift 2:30-11:00 PM PST POSITION PURPOSE: This position is responsible for assembling and manufacturing simple to moderate complexity products (such as sub assemblies, assemblies used in DC lighting ) for aircraft. The key to success in this position is the delivery of on time quality parts by assuring precise conformance to specifications, workmanship standards and customer requirements. In addition to the technical skills required, the ultimate foundation of the Assembly Department is teamwork and displaying certain behaviors to support the success of the team. Key behaviors include team work, trust, respect for co-workers, consensus building and integrity. We approach challenges willingly and consider continuous improvement a daily part of the job. ESSENTIAL FUNCTIONS AND BASIC DUTIES FOR THIS JOB • Build assemblies per work instructions, blueprints and specifications daily, • Perform in-process testing as required, • Perform Quality Workmanship, • Recommend work instruction changes to manufacturing outline as needed, • Meet daily production assignments., • Ability and desire to learn new products PERFORMANCE MEASUREMENTS: • New product support/ participation, • Teamwork, • Keeping commitments, • Scrap Rate/and or Rework QUALIFICATIONS : Education/Certification: General knowledge equivalent to high school education. Required Knowledge: • Aerospace manufacturing environment desired., • Ability to read and comprehend blueprints, specifications and schematics desired, • Capable of using all standard measuring tools (i.e. mics/indicators/height gauges/etc.)., • Finger Dexterity: Hand eye coordination, steady hands, ability to operate shop equipment., • Talking: Clear verbal communication in English, • Visual abilities: Must be able to identify colors and read minimum of 8-point font WORKING CONDITIONS The key physical requirements of this position include regular attendance, 50%walking or standing in production areas, some sitting, pushing, reaching overhead and bending to the floor. Compensation Pay Range $21-$25/hour, based on experience Please click here to review Ontic's California Consumer Privacy Act policy. Ontic Engineering and Manufacturing Inc. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person " as defined by 22. C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, asylee, or refugee.

Job Summary Responsible for inspection and test requirements at all stages of manufacturing to ensure customer requirements. The Inspector is also responsible to record and report any defects and ensure the defects are corrected before delivery to the customer. Committed member to the Quality and Production teams and adaptable to changing roles within the Quality function. Primary Responsibilities • Carries out and coordinates all inspection and test requirements as outlined in the Quality Procedure Manual and contract requirements including compliance with the requirements of AS 9100., • Maintains relevant updated specification, standard and quality systems documents., • Performs assigned tests on materials and parts, product in process, and finished product., • Inspects visually for obvious defects., • Compares results with drawing and specification requirements., • Reports problems with inspection and test results to Quality Supervisor., • Identifies defectives and segregates from acceptable product., • Notifies Quality Supervisor and Quality Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted., • Records results on inspection forms or charts and report number of defects found., • Makes recommendation on disposition of suspect/defective product to Quality Supervisor., • Supports the quality record retention requirements by assisting with filing and maintenance of Quality Records., • Experience with a 3D scanner or Faro Arm, • Working knowledge of Quality Assurance standards., • Excellent verbal and written communication skills in English., • Ability to read blueprints., • Good interpersonal skills and ability to work as a team member, as well as independently., • Ability to communicate with all levels within Productions and get messages across that has the desired effect., • Ability to think critically and act logically to evaluate situations and generates required steps to ensure success., • Persistence and determination when problem-solving., • Strong focus on quality: ability and commitment to achieve total customer satisfaction in the quality of our products, services and decisions, implement systems and processes focused on excellence and continuous improvement., • Strong focus on safety, including personal safety, safety of co-workers, and protection of property on the job in accordance and compliance with company practices, industry standards, and government regulations., • Knowledge of AS 9100 Quality Systems., • Knowledge of calibration requirements/procedures., • Approachability, • Teamwork, • Customer Focus - Knows and understands the needs of internal and external customers. Is results oriented and works hard to consistently provide exceptional service., • Ethics and Values - Adheres to an effective set of core values and beliefs and acts in accordance. Rewards the right values and disapproves of others., • Problem Solving - Looks beyond the obvious to find effective solutions., • Integrity and Trust - Widely trusted and seen as direct and truthful., • Functional/Technical Skills - Possesses the skills to be effective in the job. Has the skills to perform the job at a high level of accomplishment., • Listening - Practices active and attentive listening, able to hear others., • High School Degree or equivalent strongly preferred, • Minimum of three years successful employment as an individual contributor with a preference for aerospace manufacturing.

Date Posted: 2026-03-10 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Land & Shipboard Effector Guidance Systems Department is responsible for the delivery of affordable and innovative electrical products. Accountable for program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of our Land and Naval based electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Enhance electrical engineering skills working with digital, analog and/or RF hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Prior hands-on troubleshooting experience is preferred., • Collaborate and coordinate with Operations, Supply Chain, Quality, and other Engineering disciplines to achieve/document concurrence and resolve issues that may arise during production, testing, and integration., • Travel Requirements: less than 10% annually, • Shift Information: 3rd Shift (11pm - 8am) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis, • One will achieve a RTX Core Certification and receive Raytheon Responsible Engineer Authority (REA) Training Qualifications You Must Have • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 5 years’ prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing, • Familiarity with laboratory equipment including waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers Qualifications We Prefer • Experience in Root-Cause Corrective Action investigations, • Experience performing electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer., • Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems., • Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday 3rd Shift (11pm - 8am), • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-25 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's Effector Analog & Power (EAP) Team is looking for an Electrical Engineer with education and experience in performing circuit card testing and troubleshooting to the component level utilizing schematics and test equipment. What You Will Do • The EAP Department is responsible for the development, from concept to integration, of power systems from all round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides analog to digital interface to our front-end sensors; Telemetry and Flight Termination products. Each of these products generally operates in lower power and voltage ranges less than 10kW and 1000V., • Working with a team of engineers performing electrical tests and troubleshooting on subassemblies, assemblies, and systems for conformance to specifications, • Advanced understanding and ability to apply the theory of operation for the unit under test to enable determination of faulty product for design, workmanship, environmental and/or component defects on complex electronics., • Work on systems validation, test and analysis while working through all phases of integration, and test validation activities within the Labs., • Ensure customer success through the development and execution of innovative and comprehensive test, verification, and validation strategies, processes, tools and techniques. Qualifications You Must Have • A Bachelor’s Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years' experience, • Experience with prints, schematics, sketches, and test procedures., • Experience troubleshooting circuit cards, at the component level, • Experience with using test equipment such as oscilloscopes, signal generators or spectrum analyzers Qualifications We Prefer • Master's Degree in Electrical Engineering, • Experience performing engineering tests such as ATP (Acceptance Test Procedure), DVT (Design Verification Test) and DMV (Design Margin Verification)., • A self-starter, a quick learner, be able to function in a dynamic environment, and have good time management skills. Should have an appreciation for how successful teams are structured., • Knowledge of programmable electronic parts including microcontrollers and FPGA’s., • Strong team player with good interpersonal skills as well as strong written/verbal communication skills. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: 9/80 schedule (every other Friday off), • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! • Please consider the following role type definition as you apply for this role., • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. #LI-SP1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-02-17 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths. The Digital, RF and Power Team is seeking a Senior Digital Design Engineer with digital electronics design and analysis skills to join our team. This position is 100% ONSITE in Tucson, Arizona. What You Will Do We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to design digital electronics circuits that implement missile guidance, video and digital signal processing. Our technology base includes high-speed digital electronics, configurable logic, and homogeneous / heterogeneous multiprocessor designs. The Senior Digital Design Engineer is responsible for the design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications. The candidate should be experienced in all aspects of circuit card design including: * hardware designs with processors * FPGAs * memory * industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART Qualifications You Must Have * Bachelor’s Degree in Electrical Engineering, Computer Engineering or Electrical Engineering Technology * Minimum of five (5) years of engineering digital circuit design experience to include at least two (2) of the following: * Development and design of electronic circuit designs * Construct a design concept from the block diagram or requirements level to development of a complete hardware design, and verification via test and integration * Experience with PCB design process and expertise in tools used to design (schematic capture), analyze and simulate designs prior to hardware execution * Experience using Mentor Graphics Design Creation (Siemens EDA) tools: DxDesigner, xDX Designer VX and Xilinx (Zynq Ultrascale, Vivado, Atrix) * Experience using PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB) * The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizen are eligible for a security clearance. Qualifications We Prefer * Master’s degree in Electrical Engineering * Experience with embedded test techniques, design for test, design margin analysis and design for production * Complex circuit card assemblies between 16 and 32 layers * Constraint Editor System (CES) * Knowledge of software and/or FPGA code development * Demonstrated ability to manage technical and schedule risks and to identify cost reduction opportunities What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * This position offers relocation Learn More & Apply Now! Please consider the following role type definition as you apply for this role: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. Tucson, AZ: #LI-CV1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-24 Country: United States of America Location: US-AZ-TUCSON-M09 ~ 3350 E Hemisphere Loop ~ BLDG M09 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: Secret - Current Security Clearance Status: Active and existing security clearance required on day 1 At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. We deliver solutions that help our nation and allies defend freedoms and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. This position is for the DeepStrike-Sensor Fuzed Weapon Execution Chief Engineer Role within the Precision Fire & Maneuver Systems SSBU that is part of the Land & Air Defense Systems (LADS) SBU of Raytheon. The Chief Engineer (CE) is the key technical executive responsible for overseeing the technical baseline and ensuring the successful execution of program technical objectives. Drawing from a varied background, CEs typically have significant experience as subject matter experts, Integrated Product Team Leads, Cross Product Team Leads, or Lead Systems Engineers. In this role, you will bring a wealth of knowledge across multiple engineering disciplines to develop new weapon systems, transition them to production, and manufacture these products. You will lead large teams and manage both technical and financial responsibilities. As technical leaders, Chief Engineers work closely with program management to deliver on contracted program goals, ensuring the highest level of engineering performance and innovation. At Raytheon Engineering, Chief Engineers play a vital role in solving some of the industry's most complex challenges to create a safer world. Collaborating with multidisciplinary teams, they design and deliver cutting-edge, end-to-end solutions that detect, track, engage, and neutralize threats. With a focus on technical execution throughout a program's lifecycle, Chief Engineers lead the charge in driving the technical direction of programs, leveraging their expertise to navigate complex engineering processes and deliver exceptional results. By connecting vision with precision, they contribute to the advancement of industry-leading defense and aerospace solutions. This is an onsite role in Tucson, AZ. What You Will Do • Establish and manage a product vision, strategy, and goals to align with multiple Programs/Customers and facilitate conflict resolution., • Ensure technical integrity and engineering execution across the IPT and other functions to meet and/or exceed cost, schedule, and technical requirements., • Primary technical point of contact with senior customer counterparts, internal senior program management and engineering leadership., • Support the capture of new business and influence technical and product line roadmaps, ensuring they are reflected in program planning and execution, • Plan out and lead the incremental break-in of upgrades and system improvements, • Drive positive change within the production environment as a key stakeholder in Failure Review Boards, FRACAS activities and other continuous improvement efforts, • Technically engage with major subcontractors and partners to ensure product deliverables, • Direct a team of multi-disciplined engineers in support of missile development, • Provide technical advisory disposition for Export / Import (EXIM) compliance. Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Math (STEM) and a minimum 10 years of prior relevant experience. * Technical leadership experience (such as Chief Engineer, Engineering Lead, or Technical Director), working on Effectors or Missiles. * Experience with leading and conducting missile trade studies, missile system development and design, missile systems requirements development and management, or missile system integration and test. * Experience developing work plans, driving execution, and managing resources with multi-million-dollar annual budgets. * Experience in strategic development, customer interface, or contract capture in the Defense Industry. * Active and transferable Secret U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer * Technical leadership experience (such as Chief Engineer or Technical Director) and including experience across the development and production lifecycle * Excellent communication, technical writing, oral presentation, and interpersonal skills * Experience in leading and executing the design and development of complex system architectures * Demonstrated experience across the product lifecycle, including concept development, architecture, design, integration, verification, and production * Demonstrated experience and ability to interact with and influence Department of Defense (DoD), and/or commercial and non-traditional customer sets * Proven ability to develop effective internal and external customer relationships to ensure customer satisfaction and continued business * Direct experience with Engineering Risks and Opportunities (R&O) Management * Demonstrated experience with globally distributed engineering execution organizations (CONUS and OCONUS) * Master's degree in Engineering, Physics, or related discipline * CE Level 4 certification What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation Eligible – Relocation assistance is available. Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. * This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: * Tucson, AZ: Raytheon Tucson, AZ Location * We Are RTX #LI-Onsite #LI-HS30 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-24 Country: United States of America Location: US-AZ-TUCSON-9030 ~ 9030 S Rita Rd ~ BLDG 9030 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Our mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We empower our employees to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. The Guidance Electronics Team provides Electrical Systems Engineering to develop Guidance Electronics solutions for products across the Raytheon Missiles and Defense (RMD) portfolio. Our team develops missile Guidance Electronics Hardware. Our core electrical engineering responsibilities include architecture, analysis, requirements, integration, and test. Our core electrical engineering technologies include RF/RADAR, Navigation/IMU/GPS, Digital, and Power. We partner with several Electrical Product Team departments that provide the detailed design of our electrical products as well as missile level systems teams. The Guidance Electronics Team is searching for a Senior GPS Subsystems Engineer with experience in GPS technology. The role of the GPS Subsystems Engineer is to provide GPS electronics solution for missile products. GPS electronics solution includes architecture development, requirement definition, electronics design, analysis, modelling and testing. GPS Subsystem Engineer collaborates with missile level system engineers in developing requirements for the subsystem. They perform analysis and modeling to decompose requirements for GPS sub-assemblies and component designs. What You Will Do * Assignments may include analysis of hardware designs, subsystems, and components; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations. * Interface directly with suppliers of navigation or guidance electronics components, IMUs and GPSs, to monitor and manage programmatic activities and ensure compliance to requirements * Missile Systems has a strong culture of mentoring; it is expected that employees will be both mentors and mentees. * Assignments may require supporting multiple programs. * Assignments may require some travel, including foreign travel. * Work within a multi-disciplined team. * Work independently, with little supervision. * Develop a network and know when to use it to get help. * Collaboration with both Functional and Program higher level leadership. * Collaboration with Customer and Suppliers. Qualifications You Must Have * Typically requires a Bachelor's Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience * Minimum of 5 years of engineering experience * Experience with electrical hardware development * Experience in sub-systems, systems engineering, requirement development, developing RF electrical subsystems and/or requirement validation Qualifications We Prefer * Missile Radar and RF seeker subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic so the ideal candidate will have a background in detailed design and troubleshooting of one or more of these components. Ideal candidates will also have some experience in systems engineering and architecture and have a desire to grow into a guidance section architect. * Ideal candidates shall also have demonstrated understanding and wide application of technical theories and concepts in the area of navigation subsystems/components used in modern guidance electronics platforms * Recent technical experience relative to integrated Guidance Electronics systems using GPS and IMU navigation subsystems blended via Kalman filter techniques * Knowledge and/or experience with M-Code * Familiarity with Matlab scripting and tools * Experience with hardware integration, Hardware in the Loop (HIL), modeling and simulation and environmental testing and electronics test equipment * Experience working with missiles or similar systems. * Ability to lead cross-functional teams. * Ability to drive suppliers in meeting commitments. * Knowledge of DOD Hardware development process (knowledge of design gates). * Practical experience in all phases of the product development lifecycle. * Experience in developing proposals. * Knowledge and/or experience with Model Based System Engineering (MBSE) What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Additional Details This position is located in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-31 Country: United States of America Location: US-AZ-TUCSON-802 ~ 1151 E Hermans Rd ~ BLDG 802 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Advanced Effector Guidance Systems (AEGS) Department develops guidance section electronics architectures for development programs, supports subsystem analyses, integration and test, provides program leadership as well as GPS/IMU support. We partner with several Electrical Engineering Departments that provide the detail designs of our electrical products. We are seeking candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology to develop electrical subsystems. What You Will Do • Job responsibilities of this role vary but include activities such as troubleshooting electronics in a lab or production environment, performing system and circuit level analysis, subsystem integration and test, supporting failure investigations, maintaining and creating documentation, and interacting with multi-discipline groups including suppliers., • Troubleshooting hardware and process issues down to CCA and component levels., • Failure analysis / root cause determination and corrective action implementation., • Performing analog and digital circuit analysis and characterizing and modeling electrical signals of electronics subsystems in simulation., • Identifying and instantiating circuit card and subassembly design updates., • Conducting integration & test at the subassembly level., • Develop interconnect models between various subsystems., • Generate test procedures/plans and document test results., • Generate and present task results to small technical teams., • Ability to work in either a team or individually., • Potential travel to test areas for support/troubleshooting issues, less than 10%., • Able to lift 15 lbs Qualifications You Must Have • Master’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major., • This position requires 12 months or less of relevant professional work experience (excluding internships). Qualifications We Prefer • Experience in Root-Cause Corrective Action investigations and FRACAS processes., • Knowledge and experience with Material Review Board, Process Configuration Board, Configuration Control Board and Failure Review Board processes, proposing/defending and implementing Change Notices., • Experience with test equipment, test automation scripting, test conduction, sensor control., • Experience with writing and/or executing test procedures., • Integration and test of electrical hardware/subsystems. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! • Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-19 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, AZ and is 4th shift: 7am to 7pm Friday, Saturday, and Sunday Job Description: The Test Solutions Center (TSC) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TSC is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TSC products are in engineering labs, in the field, and in production environments utilized for weapon system products. TSC has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Software Engineer II with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: • Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS), • Prioritize and handle multiple software engineering tasks concurrently, • Troubleshoot software and test equipment instrumentation, • Work in a multidiscipline engineering team environment, • Develop and derive requirements for software products Qualifications You Must Have: • Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 2 years prior relevant experience., • Experience in developing and integrating software applications using programming languages including but not limited to C++, C#, Java, Python or Visual Basic., • Experience in utilizing integrated development environments and debugging tools to troubleshoot software implementation and ensure integrity of the software products., • Experience with Windows Operating System and Microsoft Visual Studio is required., • Ability to obtain a U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer: • Knowledge of computer architecture and computer hardware optimization techniques, • Knowledge of the development of software drivers for the operation of computer hardware interfaces, • Knowledge in common computer hardware interface and data protocols such as TCP/IP or UDP, • Knowledge of Unified Modeling Language (UML) to visualize software architecture and design, • Knowledge of software development lifecycles, such as Waterfall and Agile, • Knowledge of Software Configuration Management principles, • Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: #TestEngineering As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-07 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Production Test Engineers (PTE) are part of a manufacturing team who support the test process through one or more phases of the product life cycle, including product development, transition to production, sustained production and depot activities. PTE validates and ensures compliance of the prime hardware to technical data package requirements and supporting test equipment. Performs troubleshooting and problem solving of test failures. Identifies opportunities in test processes to improve efficiency, yields, and capacity. What You Will Do Troubleshoot and provide accurate rework instructions for the product hardware. Creation and maintenance of spares and the test equipment obsolescence plan. Creation of Basis of Estimates (BOE) to estimate costs to add additional capacity, new capabilities and equipment obsolescence. Lead projects to reduce test time, improve the test process through analysis of predictive metrics of trends, failure modes, and test yields. Develop test flows and contribute to test capacity analysis. Maintain changes to the test equipment technical data package which includes drawings, test instructions, test position manuals, and system software. Assist in non-routine fault isolation, diagnosis and repair of the product or test equipment. Lead root cause and corrective action investigations and present findings, utilizing fault trees and knowledge point plans. Perform risk assessments and supports the programs risk register reviews. Qualifications you Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience. Experience in a manufacturing environment. Ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF). Qualifications We Prefer Experience with hands-on hardware integration and troubleshooting Experience in Manufacturing environment Experience with technical writing Excellent interpersonal skills Excellent written and verbal communication skills Ability to multitask in a fast-paced environment Ability to develop sustaining solutions to routine technical problems Ability to lead and mentor newer PTE's Experience with interpretation of technical documentation Experience with data analysis What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-06 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The TESA Senior Principal Program Engagement Lead is a technical–operational leadership role responsible for the strategy, execution, and sustainment of Test Environment Support and Administration (TESA) capabilities across programs. This role serves as the primary technical and operational interface between Program Management Office (PMO), Chief Engineering (CE), Cybersecurity, IT/Digital organizations, Operations, and external vendors to ensure test environments are secure, compliant, scalable, and aligned with program schedules and cost objectives. This position bridges gaps between program intent and technical execution, translating PMO priorities and engineering needs into actionable infrastructure, cybersecurity, and operational solutions. The role functions as a single point of accountability and escalation for TESA-related planning, execution, and risk management. This position is 100% Onsite in Tucson, AZ What You Will Do Technical & Operational Leadership * Own the end-to-end technical operations strategy for TESA, including test networks, lab infrastructure, tooling, data flows, access controls, and sustainment. * Provide hands-on technical and operational guidance to resolve complex issues related to test environments, system integration, cybersecurity compliance, and infrastructure constraints. * Serve as the technical authority and advisor for TESA-related decisions impacting program cost, schedule, performance, and security. PMO & Chief Engineering Interface * Act as the primary liaison between PMO and Chief Engineering, translating program objectives, schedules, and risks into executable TESA solutions. * Support PMO with technical assessments, risk trades, cost/schedule impacts, and mitigation strategies related to test environment readiness. * Advise Chief Engineering on test environment architecture, scalability, and long-term roadmap alignment. Cybersecurity & Compliance Integration * Bridge the technical knowledge gap between Cybersecurity and PMO, ensuring security requirements are fully understood, planned, and implemented without unnecessary schedule impact. * Coordinate with Cybersecurity, Security, and Program Security to ensure test environments meet RMF, NIST, and government security requirements. * Serve as (or support) Information System Owner (ISO) responsibilities for classified and unclassified test networks, as applicable. Ecosystem & Vendor Management * Act as a single point of contact (POC) for internal stakeholders and external vendors/suppliers supporting TESA infrastructure, tools, and services. * Lead integration and coordination efforts across IT/Digital, Operations, Engineering, Cybersecurity, and suppliers to deliver cohesive test ecosystems. * Support contract execution, change requests, and technical interchange meetings related to test environments. Program Execution & EVMS * Plan, execute, and manage TESA scope using Earned Value Management (EVMS) principles, including IMS, EACs, LREs, and budget tracking. * Identify resource constraints, prioritize execution activities, and proactively manage risks and dependencies. * Provide status, metrics, and recommendations to program and functional leadership. Road mapping & Continuous Improvement * Develop and maintain short- and long-term TESA roadmaps aligned with program milestones and future program needs. * Drive process improvements, standardization, and reuse across test environments to improve efficiency, security posture, and schedule performance. * Mentor and guide technical staff and IPT leads supporting TESA execution. Qualifications You Must Have * Bachelor’s degree in Engineering, Computer Science, Information Systems, or related STEM field * Minimum ten (10) years of relevant experience in technical operations, engineering support, test environments, infrastructure, and/or program execution * Experience leading cross-functional, highly-matrixed teams * Experience with engineering development lifecycles and test environment needs * Requires full secret US government clearance on day one. Interim secret clearance is not allowed in certain program areas. Qualifications We Prefer * Experience supporting classified test environments or lab ecosystems with Special Access Programs * Experience with cybersecurity frameworks (RMF, NIST, JSIG, ICDs) * Experience serving as or supporting an Information System Owner (ISO) * Systems engineering experience with the ability to evaluate complex trade spaces * Experience translating between technical and non-technical stakeholders including external vendors and government customers * Experience with EVMS, program execution, and budget/schedule management What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. This position offers relocation. Learn More & Apply Now! Please consider the following role type definitions as you apply for this role: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. Tucson, AZ: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-09 Country: United States of America Location: US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Precision Control Actuation System organization staffs mechanical engineers for a variety of roles supporting primarily control section Integrated Product Teams. You will be expected to flex responsibilities based on the current needs of the organization and their respective skill sets. What You Will Do * At this grade level, you will be expected to work autonomously with limited oversight, have advanced understanding of the Systems Engineering domain, manage small projects that enhance PCAS organization around assigned program work, and provide guidance to other professionals. * Support may include but is not limited to detailed systems design, test design and execution, systems engineering, proposals and estimates, or earned value management. * In this position, the candidate will be responsible for developing technical solutions for a wide range of high performance actuation system and motion control challenges, such as aerodynamic steering, thrust vectoring, attitude and divert maneuvering, pointing, and stabilizing of missile systems & subsystems. * Responsibility will cover a portion of the life cycle of the product, from conceptualizing and design, to prototyping and manufacturing, integration and verification testing, through production support. * You will be expected to apply sound systems engineering principles to define and solve sometimes complex system problems while influencing engineering teams to include electrical engineering, mechanical engineering, control systems engineering, software and firmware engineering, manufacturing engineering, supply chain and others. * The position will address requirements development for actuation systems, sub-units, modules and software/firmware; improve systems tools and processes for actuation systems; aid development of Modular Open System Architecture (MOSA) standards; leverage Model Based Systems Engineering (MBSE) practices for actuation systems; enhance standardized actuation system architectures with modularity, scalability and adaptability; improve standardized verification methods and approaches for Design Verification Testing, Qualification Testing and Acceptance Test; create re-usable and scalable design and development documents to maximize cross-program efficiency. The candidate working with the multi-disciplinary actuation team will implement these systems engineering practices on program applications and influence continuous improvement methodologies to increase efficiency and eliminate systemic issues. * Day-to-day activities are highly collaborative, both internally across Raytheon as well as externally with suppliers, partners and customers. What You Will Learn * The PCAS organization provides a strong technical learning environment with a dedicated technology pyramid comprised of engineering fellows. PCAS engineers are provided the opportunity for direct access to these subject matter experts, fostering accelerated technical growth. * Hands-on opportunity is plentiful, as great emphasis is put on exposing designers to the hardware through participation in prototype building and verification testing, thus enabling firsthand knowledge of system performance. Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience, or An Advanced Degree in a related field and minimum 3 years experience * Experience with electromagnetic or electrohydraulic control actuation systems Qualifications We Prefer * Five (5) years of experience with systems, electrical or mechanical engineering of actuation systems or motion controls * Advanced degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Electrical Engineering, Physics or Computer Science * Experience developing technical solutions to a wide range of complex problems across multiple parts of the product lifecycle such as proposal, design, manufacture, integration and test * Ability to estimate project / tasks level of effort and to deconstruct higher level tasks into discrete lower-level work packages and tasks * Ability to articulate, in both oral and written form, to technical, non-technical and management audiences * Experience developing requirements and decomposing or deriving applicable technical requirements from higher level specifications * Experience with development of actuation system requirements, system architecture, requirements risk, requirements verification and validation, system performance & function, safety and environmental compliance * Experience working with a wide variety of industry / military standards and specifications for system, DC motor, and mechanism design (AGMA, IEEE, INCOSE, SAE, etc.) * Experience with feedback control systems, including control theory, system sizing, testing and integration, design to manufacturing, kinematic and dynamic simulation and analysis * Experience of developing system based models including Matlab/Simulink and SysML * Experience of Hardware In The Loop development and tools such as dSpace * Experience in design and development of test equipment for electromechanical systems that operate under high load and rate * Experience on Failure Investigation Teams with FRACAS / FRB / FR / A / CA * Experience in working with control actuation systems that employ permanent magnet brush and brushless DC motor technology and with different actuation drive systems including trapezoidal drive, sine drive and field oriented control * Experience of actuation communication busses; electromechanical actuators (using gears, ballscrews, leadscrews etc); position sensors; electronic controllers and power amplifiers * Basic understanding of packaging electromechanical systems for management of grounding, shielding and electrical noise in compact designs * Current DoD Security Clearance What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility Learn More & Apply Now! (Optional) • Please consider the following role type definition as you apply for this role., • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-31 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date Are you seeking a pathway to an incredible post-military career in the Aerospace and Defense industry? At RTX Corporation, we recognize the exceptional skills, dedication, and leadership that transitioning military service members bring to the workforce. Our SkillBridge Program offers you a unique opportunity to transition into a rewarding career within the aerospace and defense industry, across our renowned business units: Collins Aerospace, Pratt & Whitney, and Raytheon. Join us and become part of a team that is committed to innovation, excellence, and making a global impact. At RTX, you'll find a supportive environment where your military experience is valued and leveraged to drive transformative projects that shape the future of flight, defense, and connected systems. Our SkillBridge Program is more than just a job. It's a pathway to a career where your contributions are seen and celebrated every day. Here, you'll have the chance to work with cutting-edge technology, collaborate with industry experts, and grow within a company that is dedicated to your professional development. Are you ready to take your skills to new heights and make a difference on a global scale? Join RTX Corporation through our SkillBridge Program and embark on a journey that goes beyond boundaries. Your future begins here. This SkillBridge opportunity is with Raytheon. RTX is a provider of SkillBridge Fellowship opportunities for transitioning service members to gain an in-depth understanding of the aerospace and defense business from some of the most respected leaders and engineers in the industry. SkillBridge fellows will not be eligible for any compensation during their fellowship, as they will continue to receive all military pay and benefits. Upon successful completion of this fellowship, you will be well prepared and encouraged to apply for open positions listed on our careers page. To be eligible for a SkillBridge, you must meet the following requirements: • Must be on Active-Duty orders in the U.S. Armed Forces, • Must be eligible to participate per DoD Instruction 1322.29., • Must have all TAP and transition requirements completed prior to the start date., • Must receive approval from Unit Commander or O4+ in the chain of command. What You Will Do: Training & mentorship opportunities include, but are not limited to: • Enhance electrical engineering skills working with digital, analog and/or RF hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Prior hands-on troubleshooting experience is preferred., • Collaborate and coordinate with Operations, Supply Chain, Quality, and other Engineering disciplines to achieve/document concurrence and resolve issues that may arise during production, testing, and integration., • Travel Requirements: less than 10% annually, • Shift Information: 1st shift Qualifications You Must Have: • Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 2 years’ prior relevant experience, • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing, • Familiarity with laboratory equipment including waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers Qualifications We Prefer: • Experience performing electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications, and Root-Cause Corrective Action investigations, • Experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer., • Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems., • Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support. What we offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Work Schedule: Monday – Friday, • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! #SkillBridge As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-09 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date We're growing fast and we want you to grow with us! We're expanding our engineering organization dramatically to meet exciting customer demand, and we're actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required — we'll invest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career. At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Land & Shipboard Effector Guidance Systems (LSEGS) Department is responsible for the delivery of affordable and innovative electrical products. Accountable for program execution including cost, schedule and technical oversight throughout the product lifecycle. Providing resources to drive development and sustainment activities of our Land and Naval based electrical products. Our multi-disciplined teams manage a variety of engineering projects while maintaining a work life balance. What You Will Do • Enhance electrical engineering skills working with digital, analog and/or RF hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Prior hands-on troubleshooting experience is preferred., • Collaborate and coordinate with Operations, Supply Chain, Quality, and other Engineering disciplines to achieve/document concurrence and resolve issues that may arise during production, testing, and integration., • Shift Information: 2nd Shift (Monday – Friday 3pm – 12am) What You Will Learn • One will gain knowledge of various electrical components, Circuit Card Assemblies, RF, analog, digital and / or mixed signal circuit design or analysis., • One will achieve a RTX Core Certification and receive Raytheon Responsible Engineer Authority (REA) Training. Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience or an Advanced Degree in a related field., • Experience with any of the following: RF, analog, digital, and / or mixed signal circuit design or analysis and / or digital signal processing., • Experience with laboratory equipment including waveform generators, oscilloscopes, spectrum analyzers, and/or network analyzers. Qualifications We Prefer • Experience in Root-Cause Corrective Action investigations., • Experience performing electrical engineering design of CCA, EO, RF, Seeker/Sensor, or electronic subsystem; including circuit design, CCA assembly, electrical test and production/supplier/sub-tier supplier support of test equipment, test automation scripting, test conduction, sensor control, printed circuit board fabrication, circuit card assembly processes and related industry specifications., • Experience with any of the following tools: Mentor Graphics Designer, PSPICE, System Vision, MATLAB, Mathcad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio, High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), Signal Generator, Oscilloscope, and Spectrum Analyzer., • Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems., • Experience with subsystems integration and test, post test flight analysis, problem investigation, Statistical Process Control (SPC) methods in achieving production yield improvements, technical writing, formal presentation, and implementing Engineering Change Notices., • Self-starter who’s capable of working independently as well as with a small technical team. Providing technical oversight and direction, cost estimation, tracking & reporting, coordination, preparation of detailed technical team reports, and proposal support., • Willingness to travel less than 10% annually. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligibility: This position is eligible for relocation Learn More & Apply Now! Please consider the following role type definition as you apply for this role. • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • This is a 2nd shift onsite role based in Tucson, AZ. 2nd Shift hours are Monday – Friday 3pm – 12am. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-08 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Advanced Effector Guidance Systems (AEGS) Department within Raytheon Hardware Engineering provides Electrical Systems Engineering to develop Electronic Systems solutions for products across the Raytheon portfolio. Our core electrical engineering responsibilities include architecture, requirements, integration, and test. Our core electrical engineering technologies include RF/RADAR, Navigation/IMU/GPS, Data Link/Communication, Digital, and Power. We partner with several Electrical Product Team departments that provide the detailed design of our electrical products as well as systems teams. The AEGS Department is searching for an Electrical Subsystems Digital Senior Principal Engineer with experience leading a multi-disciplinary system design and integration team. The role of the Principal Engineer will be to lead or support digital design efforts, digital subsystem architecture design or initial integration efforts of development guidance systems. This role may include Control Account Management (CAM) responsibilities so Earned Value (EV) certification is preferred. What You Will Do * Lead Digital Design Efforts for development guidance systems * Accountable for program execution including cost, schedule and technical oversight throughout the early development lifecycle * Support component level design and test reviews * Raytheon has a strong culture of mentoring; it is expected that employees will be both mentors and mentees * Collaboration with both Functional and Program higher level management * Collaboration with Customer and Suppliers * Assignment may require some travel (~25%) * Assignments may include being guiding a team through several phases of hardware systems lifecycle such as designs and analysis; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations Qualifications You Must Have * Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience * Ten years of experience in one or more of the following areas: * Analog, digital, and power electronics design, integration, and production support * Decomposition of high-level requirements into actionable design electronics and subsystem architecture * Subsystem architectural design * Experience in Digital sub-systems, systems engineering, requirement development, requirement validation, Circuit Card Assembly (CCA) Design, Digital Test Integration and/or Digital Supplier Management on an effector-based product * Enhance electrical engineering skills by working with digital and/or analog hardware testing and debugging complex circuit card assemblies or electro-mechanical systems. Qualifications We Prefer * Proficient in digital design tools for CCA Schematic Capture, Interconnect Capture and Harness Design * Prior experience as a technical leader on a complex subsystem during Engineering, Manufacturing, and Development (EMD) Phase * Advanced degree in engineering, mathematics, physics, or related engineering degrees. * Systems engineering thought process with analytical skills background. * Highly self-motivated individual that can perform multidiscipline work * Electrical subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic so the ideal candidate will have a background in designing and troubleshooting of one or more of these components. Ideal candidates will also have experience in project leadership, systems engineering and architecture and have a desire to grow to a higher level. * Able to network / influence outside of the AEGS Department with other design and production support organizations, program leadership, other engineering disciplines and Manufacturing organizations. * Interpersonal skills with the ability to interact positively with peers, suppliers, management, and customers in a production environment. * Proven experience in balancing engineering process discipline and innovation for rapid development and program success. * Experience working with missiles or similar systems. * Ability to effectively work multiple tasks and priorities. * Knowledge of mixed signal electronics. * Practical experience in all phases of the product development lifecycle. * Experience in developing proposals. * Experience leading large, complex trade studies * Experience developing and materializing conceptual designs and integrating them into a system of systems What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. This position is 100% onsite in Tucson, Arizona and is eligible for relocation assistance. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-19 Country: United States of America Location: US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, AZ and is 2nd shift: 4pm to 4am Monday to Friday Job Description: The Test Solutions Center (TSC) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TSC is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TSC products are in engineering labs, in the field, and in production environments utilized for weapon system products. TSC has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Senior Software Engineer with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: • Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS), • Prioritize and handle multiple software engineering tasks concurrently, • Troubleshoot software and test equipment instrumentation, • Work in a multidiscipline engineering team environment, • Develop and derive requirements for software products Qualifications You Must Have: • Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience, or an Advanced degree in a related field and minimum 3 years experience., • Experience in developing and integrating software applications using programming languages including but not limited to C++, C#, Java, Python or Visual Basic., • Experience in utilizing integrated development environments and debugging tools to troubleshoot software implementation and ensure integrity of the software products., • Experience with Windows Operating System and Microsoft Visual Studio is required., • The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer: • Familiar with computer architecture and computer hardware optimization techniques, • Working knowledge of the development of software drivers for the operation of computer hardware interfaces, • Working knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422, • Familiarity with laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters), • Experience with Unified Modeling Language (UML) to visualize software architecture and design, • Experience of software development lifecycles, such as Waterfall and Agile, • Experience with Software Configuration Management principles, • Experience with Microsoft Azure DevOps Server or GitHub, • Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: #TestEngineering As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-12 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, you have the opportunity to try new things and make a bigger difference across a broader end-to-end solution, a richer technology and product set, an expanded range of disciplines. You will be on the front lines as we trailblaze new approaches, push the boundaries of innovation and chart a course to tomorrow you can be proud to have a hand in creating. The Advanced Effector Guidance Systems team provides Electrical Systems Engineering to develop solutions for products across the Raytheon portfolio. Our team develops missile Guidance System Hardware. Our core electrical engineering responsibilities include architecture, analysis, requirements, integration, and test. Our core electrical engineering technologies include RF/RADAR, Navigation/IMU/GPS, Digital, and Power. We partner with several Electrical Product Team departments that provide the detailed design of our electrical products as well as missile level systems teams. The Advanced Effector Guidance Systems Team is searching for a Senior Principal Electrical Systems Engineer with experience in developing RF subsystems, Radars or RF seekers. The role of the Senior Principal RF subsystem engineer is to design, develop and maintain RF architectures. Architecture development includes requirements, analysis and modelling. RF subsystem engineers collaborate with missile level system engineers in developing requirements for the subsystem. They perform evaluation and modeling to decompose requirements for RF sub-assemblies and component designs. What You Will Do * Work environment is primarily in an office, but may include labs, field work, or a combination. * Evaluation of hardware designs, subsystems, and components; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations. * Mentoring is expected. * Role may require supporting multiple programs. * Assignments may require some travel, including foreign travel. * Develop a network and know when to use it to get help. * Collaboration with both Functional and Program higher level management * Collaboration with Customer and Suppliers Qualifications You Must Have * Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience * Experience with electrical hardware development * Experience in sub-systems, systems engineering, requirement development and/or requirement validation * Experience in developing RF electrical subsystems Qualifications We Prefer * Missile Radar and RF seeker subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic. The ideal candidate will have a background in detailed design and troubleshooting of one or more of these components in RF applications. Ideal candidates will also have some experience in systems engineering and architecture and have a design to grow into a guidance section architect. * Experience working with missiles or similar systems. * Knowledge of mixed signal electronics. * Ability to manage cross-functional teams. * Ability to drive suppliers in meeting commitments. * Knowledge of DoD/DoW hardware development process (knowledge of design gates). * Knowledge and/or experience with Model Based Systems Engineering (MBSE). What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. This position is 100% onsite located in Tucson, Arizona and is eligible for relocation assistance. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-03-23 Country: United States of America Location: US-AZ-TUCSON-805 ~ 1151 E Hermans Rd ~ BLDG 805 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Software organization develops software applications, including integration and test on missiles, launchers, radars, naval systems, fire control and other complex systems. Our precision software and firmware integrate operating systems, device drivers, networking, and control software to bring together sensor, guidance, and flight control processing features to complete the mission. The Software org is made up of several Centers located across the country, responsible for all aspects of the software development lifecycle. Our 4000+ software engineers design, develop, and build innovative solutions for our customers. Join our fast-paced agile teams on the leading edge of technology. As part of the Software Engineering Directorate’s (SWE) Effectors Center (EC) team, you will be an integral part of helping Raytheon further our vision to be the global leader in core and next-generation weapon and security solutions. By any measure, Raytheon is an exciting and rewarding place to work. We pride ourselves on developing mission-driven, world-class talent. The result is a workforce that takes pride in the company and consistently delivers superior solutions. Our Senior Principal Embedded Real-Time Software Developer/Integrator is a technical position that works in an Integrated Product Team (IPT) environment to architect, design, implement, test, debug, and deploy Software for Firmware (FPGA) and Hardware solutions that meet current and next generation autonomous avionics systems’ needs. Working with a cross-discipline team, the candidate must have experience developing, testing, and integrating software for edge or embedded devices and/or subsystems (like telecom, medical, IoT, automotive, or robotics) where hardware operation, time critical function, functional reliability, mission assurance, and safety might be major concerns. The successful candidate will work with Product Owners, Chief Engineers, Management and other IPT members using Lean and/or Agile practices to ensure that embedded software is designed and developed to reliably operate toward the intended functions. This position is within the Effectors Center of the Software organization, and is an onsite role located in Tucson, AZ. What You Will Do • Architecting, designing, implementing, testing, and debugging integrated embedded real-time software within heterogenous systems composed of firmware and hardware., • Working within a cross-discipline team to define, refine, and improve product concept, implementation, testability, and guaranteed, measurable quality., • Teaching, coaching, and mentoring less experienced staff., • Contributing to proposals as well as preliminary and critical design reviews., • Ability to obtain program access. What You Will Learn • Working across a product line in collaboration with other teams. Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience., • Experience including at least two of the following: Embedded C++ Software, Embedded Software Security, Software Architecture Design and Implementation., • Experience using embedded Real Time Operating Systems (RTOS) (e.g., Green Hills, Integrity, Wind River VxWorks, Linux, etc.), • Experience developing complex systems involving the integration of hardware, firmware, and software, • Ability to obtain Interim Secret Level U.S. government issued security clearance is required prior to start date with the ability to obtain program access after start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer • Familiarity with rate monotonic theory, practice, and limitations., • Familiarity with layered architectural principles, and their limitations., • Familiarity with reading electrical schematics and relating it to software function., • Familiarity with reading firmware source like VHDL or Verilog., • Familiarity with assembly language in at least one processor/controller family., • Experience using lab instruments like power-supplies, digital multi-meters, oscilloscopes, and logic analyzers., • Experience with developing device drivers for bare-metal and/or OS applications., • Experience leading engineering teams in delivering systems (of various size) involving the integration of hardware and software. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Offered Based On Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role: • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products., • Location Information: This position is onsite at our campus in beautiful Tucson, AZ. Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round., • Virtual Fly Over City of Tucson & Community, YouTube Video Links #TucsonSoftware As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionWhy You'll Love this Child Behavior Technician Job! Are you passionate about helping children thrive and ready for a career where your work truly makes a difference? Join Alongside ABA as a Child Behavior Technician in Fullerton, CA, and be part of a team that transforms lives through compassionate, evidence-based care. As a Behavior Technician, you'll deliver one-on-one Applied Behavior Analysis (ABA) therapy to children with autism and related developmental differences. Under the guidance of a Board-Certified Behavior Analyst (BCBA), you'll follow individualized treatment plans, collect data, and help build skills in communication, social interaction, and daily living. Pay: $22 - $27 / hour *Additional pay incentives available for bilingual skills, afternoon shift availability, and RBT certification! Why Alongside? • Paid Training, • 401(K) Match: Invest in your future with employer contributions after 1-year of service, • Paid Drive Time: Travel between sessions covered, • Growth Opportunities: Career advancement & development support Apply today and join our team as a Child Behavior Technician in Fullerton, CA, to be a vital part of a child’s growth journey and make a lasting difference every day! Responsibilities • Work effectively in school, home or clinic settings while adapting strategies to each environment, • Implement individualized ABA programs under the direction of the supervising BCBA, • Collect and record accurate session data using agency-approved software (e.g., Boost, HiRasmus), • Maintain professional communication with supervisors, families and team members, • Participate in required training sessions, team meetings and supervision hours, • Support the generalization of client skills across multiple settings and caregivers, • Ensure compliance with all clinical, ethical and confidentiality standardsRequired Skills, • High School Diploma or equivalent required, • Experience working with children or individuals with developmental disabilities preferred, • Ability to work 10 - 40 hours / week, • Valid California Class C driver's license, valid insurance, and own transportation, • Strong communication, organization, and interpersonal skills, • Compassionate, patient, and eager to learn, • RBT certification preferred - training available for qualified candidates!, • Bachelor's degree in psychology, education, or related field preferred Alongside is an Equal Opportunity Employer and qualified applicants will not be discriminated against on the basis of race, color, religion, age, gender, national origin, disability or veteran status or disability, as well as other classifications protected by applicable state or local laws.

Date Posted: 2026-04-21 Country: United States of America Location: US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. We are looking for an Electrical Component Engineer to join our team in Tucson, AZ. The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications engineering tasks supporting programs in the proposal, System Design Description, Low-Rate Initial Production (SDD, LRIP), production and support phases. This position will require day to day interface with designers, product development engineering, Electronic Computer Aided Design (ECAD) function, program management, and other disciplines. This position is an onsite role, located in Tucson, AZ. What You Will Do: * Determine program statement of work (SOW) and other defined customer component application requirements. * Provide technology insertion and parts selection/standardization guidance while adhering to business, component parametric, application environmental and circuit application constraints. * Interface with multiple internal stakeholders and external suppliers/manufacturers to develop component risk and verification delineation. Create component verification data packages with supporting data. * Facilitate component selection and libraries application through the coordination and generation of the program bill of material (BOM) in a collaboration toolset. * Presentation of component standardization, design library, obsolescence management and termination finish risk results in support of program preliminary and critical design reviews (PDR’s / CDR’s.) Qualifications You Must Have: * Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following: * Experience with Parts Standardization application and technology insertion within the design process * Experience with the development of associated component data/drawings and the judgment/determination of part applications to meet program/project objectives and requirements * Experience with BOM (Bill of Material) development and management for developmental and production programs * Experience in design with integrated circuits, semiconductors, and passives * Experience or familiarity with electronics manufacturing processes and test equipment Qualifications We Prefer: * Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field * Experience working with Mentor Graphics Expedition or Design Architect and circuit simulation/analysis tools (PSPICE, - Analog Workbench) * Experience in data collection and presentation skills to adequately discuss system impact of component obsolescence issues * Knowledge of component failure modes by commodity, component reliability process monitors and/or qualification methodologies * Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. This position offers relocation based on candidate eligibility. Learn More & Apply Now! This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: gov/m/ds/clearances/c10978.htm As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Job Description Teledyne Relays (a business unit of Teledyne Defense Electronics, LLC) is a manufacturer of Electromechanical Relays, Solid State Relays, Power Controllers, RF COAX Switches and RF Matrix switching systems. The primary manufacturing facilities are located in the United States. We are a vertically integrated manufacturing and design company with major operations in Southern California. Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - Teledyne Relays is EveryWhereYouLook! Responsibilities: \n • Review documentation for accuracy, configuration review.\n, • Handle and test relays as defined by supervisors.\n, • Perform visual inspections of relays.\n, • Complete inspection reports, history logs, and associated paperwork\n, • Will receive general instructions on routine assignments and detailed instructions on new assignments.\n, • High School diploma or equivalent (GED), preferred.\n, • Training will be provided, must be flexible and willing\n, • Must have basic computer skills to make daily data entries for labor hours. \n, • Required to work well in a team/group environment, as well as independently.\n, • Must be able to apply common sense to read, understand and interpret written test procedures to perform, operate test equipment and conduct visual inspections.\n, • Must have good eye-hand coordination/dexterity to assemble small parts (plug relays into equipment for testing).\n, • Must be able to work with small parts, work well with a microscope and be able to use hand tools (tweezers, pin vise) and equipment as instructed.\n, • Must have good oral and written communications skills to keep Lead/Supervisor informed of progress or issues, and for documentation.\n, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.\n\n In our efforts to maintain a safe and drug-free workplace, Teledyne Relays requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). Please note the salary range posted below is a general guideline for this job level and location. When extending an offer, a variety of factors are considered such as responsibilities of the position, relevant education and experience, certifications, knowledge and skills. Hourly Range: $20-$28/hr Salary Range: $39,000.00-$52,000.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Date Posted: 2026-04-08 Country: United States of America Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Effector Digital Products (EDP) department designs digital electronic circuit cards and electronic units which are supported from proposal through transition to production. Our systems are subject to environments ranging from the frigid, sub-zero vacuum of space to the blistering heat of the desert floor, to the high pressures of the ocean depths. As a FPGA Design Engineer II you will develop FPGA designs for all major vendors and device families including: Xilinx, Altera, and Microsemi. Designs are implemented using VHDL for the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing and processor interfaces. Designers work with circuit card designers and systems engineers to develop requirements, architect new parts, collaborative modeling of algorithms, partition and perform code development, simulation, and place and route. Designs are verified against requirements using both directed test and constrained random methodologies. Design support is expected from requirements definition through integration and test. Design documentation and configuration management are required. This position is 100% ONSITE in Tucson, Arizona. What You Will Do * Design and deliver production quality FPGA releases from initial proof of concept up to production * Architect FPGA-based systems to determine parts, interfaces, and Concept of Operations (CONOPS) * Translate system level requirements into FPGA requirements * Design and code in VHDL for reliability and maintainability * Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage * Help drive projects and execute to program schedules on time and budget * Create complete documentation including requirements, verification plan, and user’s guides * May lead small teams and mentor junior engineers * May support internal and external technical reviews Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience to include at least 1 of the following: * Digital design and VHDL coding * Xilinx or Microsemi devices and flow tools * Delivering FPGA solutions to system level applications * Hands on experience with integration and debug Qualifications We Prefer * FPGA design experience in one or more of the following areas: * Radar processing techniques * Image processing techniques for visual and infrared sensors * Embedded systems design using ARM, Microblaze, or Nios processors * Gigabit serial interfaces and multi-gigabit transceivers (MGTs) * Constrained random verification in UVM using System Verilog * Verification utilizing emulation platforms, such as Veloce What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * This position offers relocation Learn More & Apply Now! Please consider the following role type definition as you apply for this role: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. Tucson, AZ: #LI-CV1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Customer Care Health Representative\n\n\n\t • Remote: Yes (Local candidates only)\n\t, • Pay Rate: $21.99/hr\n\t, • Schedule:\n\t\n\t\t, • Must be flexible between 7:00 AM – 7:00 PM (staggered shifts)\n\t\t, • Weekends and overtime may be required\n\t\t, • Handle high-volume inbound/outbound calls and electronic communications\n\t, • Schedule, confirm, and manage patient appointments\n\t, • Register patients and verify insurance coverage\n\t, • Communicate estimated financial responsibility when applicable\n\t, • Route inquiries to appropriate medical personnel\n\t, • Document interactions and maintain accurate patient records\n\t, • Ensure data integrity and perform necessary reconciliations\n\n\n\nRequired Qualifications\n\n\n\t, • High School Diploma or equivalent\n\t, • Minimum 2+ years of true hands-on experience in:\n\t\n\t\t, • Call center environment (required – must be clearly demonstrated)\n\t\t, • Customer service\n\t\t, • Healthcare setting\n\t\n\t\n\t, • Strong verbal and written communication skills\n\t, • Proven multitasking and organizational abilities\n\t, • Demonstrated interpersonal skills\n\n\n\nPreferred Qualifications\n\n\n\t, • Experience supporting medical specialties such as:\n\t\n\t\t, • Endocrinology, GI/Liver, Infectious Disease, Nephrology, Pulmonary, or Rheumatology\n\t\n\t\n\t, • Vocational training or certifications in:\n\t\n\t\t, • Appointment scheduling\n\t\t, • Patient registration\n\t\t, • Insurance verification\n\t\t, • Medical assisting\n\t\n\t\n\t, • Associate’s or Bachelor’s degree in healthcare, business, or related field\n\n\n\nWhat We’re Looking For\n\n\n\t, • Quick learners who can adapt to a fast-paced, high-volume environment\n\t, • Candidates are comfortable navigating a learning curve\n\t, • Strong communicators with a patient-first mindset\n\t Trust the office staffing pioneer. Finding the right job isn’t always easy. Kelly® Professional & Industrial takes the guesswork out of your job search by connecting you with great opportunities that work for you. That means your schedule, your interests, and your career plan. In fact, our company created the staffing industry with the goal of connecting people with great office jobs-so you could say we’re pretty good at it!\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

Job DescriptionWhy You'll Love this Behavior Technician (BT) Job! Are you passionate about helping children thrive and ready for a career where your work truly makes a difference? Join Alongside ABA as a Behavior Technician (BT) in Fullerton, CA, and be part of a team that transforms lives through compassionate, evidence-based care. As a Behavior Technician, you'll deliver one-on-one Applied Behavior Analysis (ABA) therapy to children with autism and related developmental differences. Under the guidance of a Board-Certified Behavior Analyst (BCBA), you'll follow individualized treatment plans, collect data, and help build skills in communication, social interaction, and daily living. Pay: $22 - $27 / hour *Additional pay incentives available for bilingual skills, afternoon shift availability, and RBT certification! Why Alongside? • Paid Training - No Experience Required!, • 401(K) Match: Invest in your future with employer contributions after 1-year of full-time employment, • Paid Drive Time: Travel between sessions covered, • Growth Opportunities: Career advancement & development support, • Flexible Scheduling: Flexible part-time options – 2 weekday afternoons (2pm-8pm) of availability required! Training Schedule:, • Training requires 8 consecutive business days of availability: Monday - Friday, followed by Monday-Wednesday of the next week., • You may choose one of the following training schedules:, • 3:00 PM – 7:00 PM, with the final Wednesday from 8:30 AM – 5:30 PM Apply today and join our team as a Behavior Technician (BT) in Fullerton, CA, to be a vital part of a child’s growth journey and make a lasting difference every day! Responsibilities • Work effectively in school, home or clinic settings while adapting strategies to each environment, • Implement individualized ABA programs under the direction of the supervising BCBA, • Collect and record accurate session data using agency-approved software (e.g., Boost, HiRasmus), • Maintain professional communication with supervisors, families and team members, • Participate in required training sessions, team meetings and supervision hours, • Support the generalization of client skills across multiple settings and caregivers, • Ensure compliance with all clinical, ethical and confidentiality standardsRequired Skills, • High School Diploma or equivalent required, • Experience working with children or individuals with developmental disabilities preferred, • Ability to work 10 - 40 hours / week, • Valid California Class C driver's license, valid insurance, and own transportation, • Strong communication, organization, and interpersonal skills, • Compassionate, patient, and eager to learn, • RBT certification preferred - training available for qualified candidates!, • Bachelor's degree in psychology, education, or related field preferred Alongside is an Equal Opportunity Employer and qualified applicants will not be discriminated against on the basis of race, color, religion, age, gender, national origin, disability or veteran status or disability, as well as other classifications protected by applicable state or local laws.

Date Posted: 2026-03-27 Country: United States of America Location: US-AZ-TUCSON-807 ~ 1151 E Hermans Rd ~ BLDG 807 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date We're growing fast and we want you to grow with us! We're expanding our engineering organization dramatically to meet exciting customer demand, and we're actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required — we'll invest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career. At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. We deliver solutions that help our nation and allies defend freedoms and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. Raytheon’s Hardware Engineering (HWE) team leads the mechanical hardware design, development and production of critical defense systems. The HWE Team uses state-of-the-art tools, processes, technology, and Raytheon’s CORE principles. HWE’s capabilities encompass a broad range of technical disciplines which include engineering, manufacturing, technical services, materials, processes, analysis, test, and documentation. The ideal candidate for Senior Mechanical Engineer will bring a blend of technical ability, experience in mechanical hardware design, system integration skills, and a strong background in program execution whether design and development or production support. As a key contributor on a mechanical or cross-functional engineering team, you will take responsibility for component and assembly modeling, documentation, design changes, and releases processes. This position is ideal for a mid-career mechanical engineer who is looking to grow their skills in design, manufacturing, and technical problem-solving within a highly collaborative and mission-focused environment. What You Will Do • Design:, • Developing innovative technical solutions to a wide range of complex challenges spanning the entire product lifecycle, including proposal, advanced development, design, manufacturing, integration, and testing of missiles and launchers, support equipment and electronics for military programs., • Perform mechanical design analyses utilizing engineering fundamentals to ensure form, fit, and function are as intended by design for the use-application., • Lead small teams utilizing strong mechanical hardware design experience and knowledge in a fast-paced collaborative environment with structures, thermal, harness and interconnects, electronics packaging, tooling and/or integration., • Provide support for product assembly and integration in factories and suppliers at both domestic and international locations to assess requirements compliancy., • Teaming/Communication:, • Lead a mechanical engineering team and collaborate with cross-functional teams including other engineering disciplines, operations, supply chain, quality, and external suppliers to resolve technical challenges and develop effective design solutions., • Independently manage tasks and deliver on schedule, budget, and technical goals., • Participate in design reviews and conduct trade studies to support informed, sound engineering decisions., • Mentor and guide less experienced engineers, contributing to team development and technical growth. Qualifications You Must Have • Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an Advanced Degree in a related field and minimum 3 years experience., • Experience in the creation, review and interpretation of technical documentation utilized in the development or production of hardware or tooling products., • Experience in mechanical design, advanced design development, manufacturing or tooling processes, or related areas., • Experience in the development, creation, release, or updates of engineering drawings utilizing a 3D CAD design tool. Qualifications We Prefer • Highly detail-oriented with a demonstrated ability to work effectively within cross-functional teams., • Ability to work autonomously, lead engineering teams, with minimal supervision., • Technical Data Package creation using GD&T (Geometric Dimension and Tolerances), change notice processing including communication of required functional and performance requirements., • Experience using CREO CAD design and documentation tools or similar 3D solid modeling software with a configuration and data management environment., • Factory support experience and development of low-rate as well as full-rate production of hardware., • Experience in design, fabrication, or integration of effectors and launchers including harness and interconnects, energetics and propulsion, and electronics packaging., • Working knowledge of industry specifications utilized in creation of technical data packages., • Willingness to travel to suppliers and factories (domestic and international), • Advanced degree in mechanical, aerospace, or manufacturing engineering, or hardware systems design. What We Offer • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation., • Relocation Eligible - relocation assistance is available for this position Learn More & Apply Now! Please consider the following role type definition as you apply for this role. • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Location Information: This position is onsite at our campus in beautiful Tucson, AZ. Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America’s 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature’s best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson’s fantastic weather lets residents enjoy the outdoors year-round. Virtual Fly Over City of Tucson & Community, YouTube Video Links As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Shelter Therapist Contract Position The Coalition to Abolish Slavery and Trafficking (Cast) is seeking a part-time contract shelter therapist to provide mental health crisis support and individual therapy to residents of our Emergency Shelter Program and our Transitional Shelter Program. Program Description Founded in 1998, the Coalition to Abolish Slavery and Trafficking (CAST) is a Los Angeles-based nonprofit organization that is working to put an end to human trafficking through comprehensive, life-transforming services to survivors and a platform to advocate for groundbreaking policies and legislation. Over the past two decades, CAST has supported thousands of survivors through every phase of their journey to freedom from counseling, to legal resources, to housing, educational and leadership training and mentorship. Cast's shelter programs provide physically and psychologically safe housing for trafficking survivors. Through a host of supportive programs and services, the shelters are designed to help clients establish independence, to build community, and to expand their own supportive networks. Cast currently operates 2 shelter programs, Mariposa Haven (transitional housing) and Hummingbird Haven (emergency housing) for adult female-identifying and gender non-conforming survivors of human trafficking. Scope of Work • Conduct individual therapy with shelter residents that are interested (via telehealth or during monthly visits to the shelters), • Engage with shelter residents to build rapport and trust, • Provide on-site clinical support in the shelter setting (a minimum of one day per month in each of the two shelters with further support as needed) Qualifications • Licensed Clinical Social Worker (LCSW), Licensed Marriage and Family Therapist (LMFT), or Interested? If interested, please send your resume to Rebecca Amado-Sprigg, Associate Director of Equitable Housing - Job Posted by ApplicantPro

Job DescriptionWhy You’ll Love this Behavior Technician (BT) / Registered Behavior Technician (RBT) Job ! Are you passionate about helping children thrive and ready for a career where your work truly makes a difference? Join Alongside ABA as a Behavior Technician (BT) / Registered Behavior Technician (RBT) in Van Nuys, CA, and be part of a team that transforms lives through compassionate, evidence-based care. As a Behavior Technician, you’ll deliver one-on-one Applied Behavior Analysis (ABA) therapy to children with autism and related developmental differences. Under the guidance of a Board-Certified Behavior Analyst (BCBA), you’ll follow individualized treatment plans, collect data, and help build skills in communication, social interaction, and daily living. Pay: $22 - $27.50 / hour Why Alongside? • Paid Training, • 401(K): Invest in your future after 1-year of full-time employment, • Paid Drive Time: Travel between sessions covered, • Growth Opportunities: Career advancement & development support, • Training requires 8 consecutive business days of availability: Monday - Friday, followed by Monday-Wednesday of the next week., • You may choose one of the following training schedules:, • 3:00 PM – 7:00 PM, with the final Wednesday from 8:30 AM – 5:30 PM Apply today and join our team as a Behavior Technician (BT) / Registered Behavior Technician (RBT) in Van Nuys, CA, to be a vital part of a child’s growth journey and make a lasting difference every day! Responsibilities • Work effectively in school, home or clinic settings while adapting strategies to each environment, • Implement individualized ABA programs under the direction of the supervising BCBA, • Collect and record accurate session data using agency-approved software (e.g., Boost, HiRasmus), • Maintain professional communication with supervisors, families and team members, • Participate in required training sessions, team meetings and supervision hours, • Support the generalization of client skills across multiple settings and caregivers, • Ensure compliance with all clinical, ethical and confidentiality standardsRequired Skills, • High School Diploma or equivalent required, • Experience working with children or individuals with developmental disabilities preferred, • Ability to work 10 - 40 hours / week, • Valid California Class C driver's license, valid insurance, and own transportation, • Strong communication, organization, and interpersonal skills, • Compassionate, patient, and eager to learn, • RBT certification preferred - training available for qualified candidates!, • Bachelor's degree in psychology, education, or related field preferred, • Must pass a criminal background check, motor vehicle record check, take a TB test, and show proof of required vaccinations during our onboarding. Costs will be reimbursed with the first regular payroll.Alongside is a leading provider of Applied Behavior Analysis (ABA) services, dedicated to empowering families with children on the Autism Spectrum. As we continue to grow and expand our services in homes, schools, and clinics, we remain committed to delivering innovative, compassionate, and evidence-based care. Alongside is an Equal Opportunity Employer and qualified applicants will not be discriminated against on the basis of race, color, religion, age, gender, national origin, disability or veteran status or disability, as well as other classifications protected by applicable state or local laws.