Trabajos welding inspector en New York, New YorkCrear alertas

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid driver’s license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect

Job Description MAC Products is a third-generation, family-owned manufacturer based in Kearny, NJ with 60 years in business. We serve the rail transit electrification and electrical utility industries — a specialized niche where attention to detail and craftsmanship genuinely matter. As we continue to grow, we are looking for a hands-on, experienced Quality Inspector to join our small quality team and take ownership of mechanical inspection activities. This is a full-time, on-site position (Monday–Friday, Kearny NJ). Please apply only if you are currently local and able to commute daily. What You'll Do • Perform dimensional and mechanical inspections of machined, fabricated, and assembled components using standard shop measurement tools., • Conduct visual weld inspections to workmanship standards — evaluating MIG and TIG welds on fabricated structures and assemblies., • Inspect brazed joints and assembled hardware per engineering drawings and applicable standards., • Identify and document nonconforming material; support disposition decisions with production and engineering., • Record inspection results accurately in electronic systems and paper traveler documents., • Collaborate closely with manufacturing to catch defects early and provide clear, actionable feedback to operators., • Perform some electro-mechanical inspection activities as needed (cross-training with electrical inspector). What We're Looking For Required: • Minimum 3–5 years of hands-on experience in a manufacturing inspection or quality control role., • Proven ability to read and interpret mechanical engineering drawings — GD&T, tolerances, weld symbols., • Experience with standard measurement tools: calipers, micrometers, gauges, weld fillet gauges., • Familiarity with MIG and TIG welding processes and the ability to perform visual weld inspections., • Strong hands-on mechanical aptitude and attention to detail., • Comfortable working on the shop floor in a manufacturing environment., • Must be a U.S. citizen or permanent resident. Preferred / Big Plus: • AWS Certified Weld Inspector (CWI) certification — not required, but highly valued., • Background in structural fabrication, heavy manufacturing, or job shop environments., • Exposure to ISO 9001 or another formal Quality Management System., • Experience with non-conformance documentation and basic root cause analysis. Why MAC Products? • Small quality team — your work is visible and your contributions matter directly., • Niche industry: rail transit and electrical utility hardware — interesting, specialized work., • Stable, established company (60 years) with a growth-oriented leadership team. Our fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.From humble beginnings more than 50 years ago, MAC has evolved into a field leader and highly recognized producer of high quality equipment and products for the transmission, distribution and control of electrical power.\r\n\r\nOur fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $100,000 per year A bit about us: Trusted leader in designing, engineering, and supporting heavy-duty material handling and defense equipment. With decades of proven expertise, we provide mission-critical solutions that keep military, industrial, and commercial operations moving safely and efficiently. Our commitment to innovation, reliability, and customer support ensures that the toughest jobs get done—no matter the environment. Why join us? Become part of a team that builds equipment trusted in the most demanding environments. We value innovation, craftsmanship, and collaboration—empowering our people to solve complex challenges and make a real impact. With competitive pay, comprehensive benefits, and room to grow, we invest in our employees just as much as we invest in our products. If you’re looking for a career where your work matters. Job Details Job Details: We are seeking a highly skilled and experienced Permanent Certified Weld Inspector to join our dynamic team in the Manufacturing industry. This role is integral to ensuring the quality and safety of our welding projects. The successful candidate will be responsible for inspecting and approving all welding work, identifying and rectifying potential issues, and ensuring compliance with all relevant regulations and standards. This position requires a keen eye for detail, strong technical knowledge, and a commitment to excellence. Responsibilities: 1. Perform regular quality inspections on all welding work, ensuring compliance with national and international standards., 2. Identify, report, and rectify any defects or non-compliance issues in the welding work., 3. Conduct root cause analysis to identify the source of any defects or failures and implement corrective actions to prevent recurrence., 4. Collaborate with the welding team and other departments to ensure the overall quality and safety of our products., 5. Maintain detailed records of inspections, findings, and corrective actions., 6. Stay updated with the latest developments in welding technology, techniques, and safety standards., 7. Train and mentor junior inspectors and welders, fostering a culture of continuous learning and improvement., 8. Participate in project planning and pre-construction meetings to provide insights on potential welding issues and solutions. Qualifications: 1. A minimum of 5 years of experience as a Certified Weld Inspector in the Manufacturing industry., 2. Certified Welding Inspector (CWI) certification from the American Welding Society (AWS) or equivalent., 3. Proven experience in quality assurance and root cause analysis., 4. In-depth knowledge of welding techniques, materials, and equipment., 5. Strong understanding of national and international welding standards and regulations., 6. Excellent problem-solving abilities and attention to detail., 7. Ability to communicate effectively with team members at all levels., 8. Proficiency in using inspection tools and software., 9. Physical stamina and the ability to work in various conditions and environments., 10. A commitment to safety, quality, and continuous improvement. Join our team and play a crucial role in maintaining the high standards of quality and safety that our clients have come to expect from us. This is a fantastic opportunity for a seasoned Certified Weld Inspector to make a significant impact in a leading manufacturing company. If you have the necessary skills, experience, and dedication to excellence, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Lead Fleet Mechanic - Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.

Job DescriptionLead Fleet Mechanic Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • Be available for overtime, emergency field repairs, and peak-season demands.Required Qualifications, • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Reliable, punctual, safety-conscious, and organized with good communication skills for clear reporting.Preferred Qualifications, • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Comfort working on both vehicles and specialized machinery.What We Offer, • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.If you have the technical skills, leadership mindset, and drive to keep a large fleet and field teams moving reliably, apply today. This is a chance to make a direct impact in a respected, growing operation.

The Structural Steel Inspector is responsible for verifying that structural steel materials, fabrication, welding, bolting, erection, and associated construction activities conform to approved contract documents, structural drawings, specifications, shop drawings, and code requirements. The Structur

We're seeking AWS Certified Welding Inspectors (CWIs) to support our growing pipeline of infrastructure and structural projects. Work alongside PEs, senior inspectors, and technical experts. Certified Welding Inspector (CWI).

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Inspector – NJ DCA Reports to: Department Manager and/or Project Manager General Qualities: • Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey., • This role is responsible for ensuring that all work complies with applicable codes, standards, and project specifications, while maintaining the highest levels of safety and quality., • 3–9 years of relevant inspection experience Technical Duties & Responsibilities: • Perform field inspections in accordance with NJ DCA regulations, project specifications, and applicable building codes, • Inspect construction activities including structural steel, welding, concrete, masonry, and fireproofing, • Verify compliance with approved plans, submittals, and contract documents, • Identify and report non-conforming work and coordinate corrective actions, • Prepare and submit detailed daily inspection reports and documentation, • Coordinate with contractors, engineers, and project stakeholders to ensure quality and compliance, • Bachelor’s degree in civil, Structural, or Geotechnical Engineering (preferred), • Structural Welding, • Structural Steel & Bolting, • Reinforced Concrete, • Structural Masonry, • Spray-Applied Fireproofing, • NJ DCA Special Inspector – Concrete Placement, • NJ DCA Special Inspector – Prestressed Concrete, • NJ DCA Special Inspector – Soils, • Nuclear Gauge Safety Certification (U.S. Department of Transportation), • OSHA 30 Certification Physical Requirement: • Ability to pass a physical exam for full mobility, • Capable of lifting and/or moving up to 50lbs carrying, and transporting equipment, samples, and materials, • Comfortable navigating active construction sites, including ladders, scaffolding, and uneven terrain, • Willingness to work in varying site conditions and project environments KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Company Overview Special Testing & Consulting, LLC specializes in comprehensive inspection and testing services across various construction materials. Since 2006, we have expanded our expertise and service reach within our region, supported by a fully certified team of inspectors and engineers. We are a well respected Engineering and Materials Testing firm with several high profile projects throughout the NY Metro Area. Description We are seeking a motivated, experiened ICC Special Inspector in all areas, particularly in Soils, Masonry, Rebar, or Steel Reinforcement. You will be performing inspection for Soils, Masonry, Rebar, Steel Reinforcement on new construction renovation, alteration and enlargement projects throughout the NYC Metro Area. Your work will directly contribute to the integrity and durability of major construction developments. Additional openings for Mechanical Engineers and Special Inspectors with ICC Certifications in all disciplines, including Welding, CWI, NDT UT MT. Join our highly regarded Engineering and Materials Testing Company! Responsibilities • Perform thorough inspections of masonry work, rebar placement, soils or steel reinforcement in accordance with ICC (International Code Council) standards and project specifications., • Observe work conformance with plans and specifications of drawings, design documents and building codes., • Document inspection findings accurately through detailed reports and communicate non-compliance issues promptly to project teams. Must have ONE or more current certification listed: • ICC Masonry, • ICC Steel Reinforcement – Rebar, • CWI Welding Inspector or ICC Welding Inspector, • Mechanical Engineer, • ICC Special Inspector (Soils, Steel & Bolting, Reinforced Concrete, Masonry, Fireproofing, Rebar), ACI Level II or Concrete Construction, • 2-5 years construction, inspection experience, • Not required, but a plus for bachelor’s Civil Engineering or related education, • Ability to read, interpret engineering drawings and specifications, • Experience in accurately performing and reporting field inspections in timely manner, • Excellent written and verbal communication, • Self-disciplined and highly motivated, • Good decision-making skills, detail oriented, accurate, • Salary based on knowledge, experience and education, • 401k Retirement with Company Match, • Paid vacation/sick, • Paid Holidays, • Medical Benefits with several plans to choose from We are an equal opportunity/affirmative action employer, and invite all resumes Company DescriptionIf you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! Special Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees. The Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on Special Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. As our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project. To learn more about our company, visit our website: . We are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.If you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! \r\n\r\nSpecial Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees.\r\n\r\nThe Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on\r\n\r\nSpecial Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. \r\n\r\nAs our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project.\r\n\r\nTo learn more about our company, visit our website: . \r\n\r\nWe are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description 5Quality Inspector - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $55,000 to $75,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionFounded in 1987, RAND Engineering & Architecture, DPC is an employee-owned 115+ person Manhattan-based firm that designs, specifies, and administers restoration, upgrade, and adaptive re-use programs on behalf of owners, managers, and co-op and condo boards. RAND is seeking a qualified, motivated, and entrepreneurial Inspector to help assist in the performance of Special, Progress, and Energy Inspections across all the teams at RAND. Inspections will take place on a vast variety of projects, such as Capital Improvement Programs, FISP Repairs, Sidewalk Vault Replacements, Parking Garage Repair Programs, Mechanical Upgrades, and Interior Renovations. This is a full-time position. Job Responsibilities/Duties include but not limited to: • Perform Special/Progress/Energy Inspections on current and upcoming projects throughout the NYC metro area, NJ, Long Island, and Westchester., • Must be able to read, understand, and interpret all construction plans/drawings, specifications, project schedules, submittals, shop drawings, and other project/contract documents, and perform on-site inspections to ensure compliance with all referenced documents, building codes, and industry standards., • Must be able to maintain meticulous records, including field notes, and prepare inspection reports in a timely manner., • Must have familiarity with the latest building codes, code-mandated construction compliance items, and industry standards., • Must be available to attend Pre-Construction Meetings, Progress Meetings, and progress and final inspections., • Must be able to immediately communicate all non-conformance items to the attention of the contractors, RAND Project Manager, and the Applicant of Record., • Must be able to communicate daily with project managers, contractors, and other Special Inspectors regarding the project status, inspection planning, and Special Inspection schedules., • Must have the ability to coordinate/communicate effectively with contractors, colleagues, clients, and project teams regarding construction project activities., • Must have a strong attention to detail., • Must be punctual and efficient., • Must have excellent verbal and written communication skills., • Must be able to comfortably maneuver through active construction sites at existing and new buildings, including crawl spaces, cellars/basements, interior spaces, facades, roofs, bulkheads, etc. and will be expected to perform inspections from suspended and supported (pipe) scaffolding, including ladders, baker scaffolds, and boom lifts., • Must have ability to perform multiple inspections on a daily basis., • Must have the ability to effectively work independently and collaboratively in a team environment, both with internally and externally parties., • Must be able to perform additional responsibilities as required by business needs., • Must have an entrepreneurial spirit in finding Special Inspection opportunities that support billing metrics., • Must have an understanding of the importance of utilization rates, billable hours, and profitability. Requirements: • Active certifications for all or some of the following credentials:, • ICC Concrete Special Inspector, • ACI Concrete Inspector, • ICC Masonry Special Inspector, • ICC Steel Bolting Special Inspector, • ICC Steel Welding Special Inspector, • AWS Steel Welding Inspector, • ICC Mechanical Systems Special Inspector, • ICC Sprayed Fire Resistant Materials Special Inspector, • Must have experience performing all or some of the following Special/Progress/Energy Inspections:, • Chimneys and Vents, • Heating Systems, • Mechanical Systems, • Sprinkler Systems, • Standpipe Systems, • Concrete Cast-In-Place, • Structural Stability - Alterations of Existing Buildings, • Structural Steel - Details, • Structural Steel - High Strength Bolting, • Structural Steel - Welding, • Exterior Insulation Finishing Systems (EIFS), • Fire-Resistant Penetrations and Joints - Firestop, • Masonry, • Post-Installed Anchors (Concrete & Masonry), • Sprayed Fire-Resistant Materials, • Wall Panels, Curtain Walls & Veneers, • Tenant Protection Plan Compliance, • Energy Code Compliance (Commercial & Residential), • Fire-Resistance Rated Construction, • Footing and Foundation, • Lowest Floor Elevation, • Public Assembly Emergency Lighting, • Structural Wood Frame, • Must have or be able to obtain the following certifications:, • 4-Hour Supported (Pipe) Scaffold User, • 16-Hour Suspended Scaffold User, • Must have documented proof of minimum relevant experience and certifications to perform the above-cited Special/Progress/Energy Inspections as required by the building codes., • Bachelor’s Degree in Architecture or Engineering preferred, but not required if candidate has relevant experience and certifications, as required by the building codes., • Registered Architect and/or Professional Engineer licensed in the States of New York and New Jersey is a plus, although not a requirement if qualified through supplemental education/certifications/experience. Life at RAND As an employee-owned business, at RAND, we believe great work starts with great people—and we take care of ours. Our comprehensive benefits package is designed to support you both professionally and personally, including: • Medical, dental, and company-sponsored vision coverage, • 401(k) with company match to invest in your future, • Long-term disability and life insurance, • Transit and parking benefits for easy commuting, • On-site exercise room and wellness perks like yoga classes, • Ongoing professional development and career growth opportunities, • Employee referral incentives, • A RAND Certified Project Management Program Powered by JazzHR j6aYDerzKK