Contract safety jobs in StourbridgeCreate job alerts

\n Asset Manager\n \n Hybrid/Birmingham/Remote \n Role Purpose\n The Asset Manager will report to the Data Architect Manager and is responsible for ensuring that NRTS product and configuration data is accurate, consistent, and complete across all systems. This role manages the Product Catalogue, implements the Information Asset Register, and ensures data governance and obsolescence processes are executed effectively for mainly hardware assets. The post holder provides subject matter expertise across internal and external stakeholders to ensure data assets are fit for purpose and deliver measurable business value. This role underpins the accuracy, reliability, and compliance of NRTS configuration and asset data. The successful candidate will enable the business to make informed decisions, optimise asset lifecycle management, and maintain operational resilience through trusted and governed data. \n Key Responsibilities\n Product Catalogue & Asset Management\n \n • Populate and maintain the NRTS Product Catalogue with all known versions, specifications, and associated support asset data.\n, • Provide accurate, periodic reports on the supportability and lifecycle status of NRTS assets.\n, • Maintain the accuracy and completeness of all asset and service records used on the NRTS programme.\n \n Obsolescence and Configuration Processes\n \n, • Collaborate with the Logistics Manager, CRM Manager, and Release Manager to review and enhance the Obsolescence Management process and related procedures.\n, • Identify and manage risks relating to asset end-of-life and end-of-support.\n, • Establish and maintain consistent policies and procedures to ensure configuration data is accurate, secure, and contractually compliant.\n, • Manage and maintain multiple NRTS datasets including Forward Stock, Support Spares, Test Equipment, and other repositories to ensure alignment and consistency.\n \n Network Configuration Management\n \n, • Maintaining repository for network, device and software configurations.\n, • Maintain the process to check that CMDB accurately reflects the installed Firmware and software on network assets.\n, • Manage discrepancies between data and installed configuration.\n, • Establish process with Provisioning Team for using and recording gold configurations.\n, • Track configuration changes on Network Assets.\n \n Information Governance and Data Quality\n \n, • Establish and maintain the Asset Information Register (Data Dictionary) to document data sources, ownership, and refresh frequency.\n, • Implement data quality routines, metrics, and controls to proactively identify and resolve data issues.\n, • Grade and prioritize data quality issues based on business and safety impact to ensure that high-value risks are addressed promptly.\n, • Ensure data management processes meet governance standards and audit requirements.\n \n Analytics and Reporting\n \n, • Deliver bespoke analytics and dashboards using Qlik Sense to provide insights into asset lifecycle, data quality, and configuration status.\n, • Support the migration of reporting from QlikView to Qlik Sense, ensuring improved visualization and accessibility.\n, • Produce periodic and adhoc reports on product lifecycle, supportability, and configuration compliance for key stakeholders.\n \n Stakeholder Engagement and Continuous Improvement\n \n, • Work collaboratively with internal and external stakeholders to define standard methods of recording support contract details within Remedy ITSM.\n, • Ensure continuous alignment between business, data, and technical teams regarding data requirements and standards.\n, • Drive ongoing improvements in asset and data management processes through the Continual Service Improvement framework.\n, • Provide internal subject matter expertise (SME) for data, configuration, and product catalogue management.\n \n Skills, Knowledge and Experience\n \n, • Systems & Tools Handson experience with Remedy CMDB/ServiceNow/ITSM, Qlik Sense/PowerBI and data migration projects.\n, • Data Quality Strong background in data validation, profiling, and data governance.\n, • Analytics Capable of creating visual reports and insights in Qlik Sense (or similar BI tools).\n, • Stakeholder Management Proven ability to work crossfunctionally across business, technology, and supplier teams.\n, • Domain Experience Telecommunications, transport infrastructure, or technology environment preferred.\n, • Certifications (Desirable) ITIL Foundation, Data Management, or Information Governance qualification.\n \n Personal Attributes\n \n, • Analytical and detailoriented, with strong documentation skills.\n, • Selfstarter capable of working independently and managing priorities.\n, • Strong communicator, able to engage and influence technical and business stakeholders.\n, • Able to work under pressure and deliver to tight deadlines.\n, • 26 days holiday, plus public holidays, and the option to buy or sell days annually\n, • Car Allowance\n, • Company pension scheme\n, • A range of family friendly policies\n, • Occupational health support and wellbeing Portal\n

\n Asset Manager\n \n Hybrid/Birmingham/Remote \n Role Purpose\n The Asset Manager will report to the Data Architect Manager and is responsible for ensuring that NRTS product and configuration data is accurate, consistent, and complete across all systems. This role manages the Product Catalogue, implements the Information Asset Register, and ensures data governance and obsolescence processes are executed effectively for mainly hardware assets. The post holder provides subject matter expertise across internal and external stakeholders to ensure data assets are fit for purpose and deliver measurable business value. This role underpins the accuracy, reliability, and compliance of NRTS configuration and asset data. The successful candidate will enable the business to make informed decisions, optimise asset lifecycle management, and maintain operational resilience through trusted and governed data. \n Key Responsibilities\n Product Catalogue & Asset Management\n \n • Populate and maintain the NRTS Product Catalogue with all known versions, specifications, and associated support asset data.\n, • Provide accurate, periodic reports on the supportability and lifecycle status of NRTS assets.\n, • Maintain the accuracy and completeness of all asset and service records used on the NRTS programme.\n \n Obsolescence and Configuration Processes\n \n, • Collaborate with the Logistics Manager, CRM Manager, and Release Manager to review and enhance the Obsolescence Management process and related procedures.\n, • Identify and manage risks relating to asset end-of-life and end-of-support.\n, • Establish and maintain consistent policies and procedures to ensure configuration data is accurate, secure, and contractually compliant.\n, • Manage and maintain multiple NRTS datasets including Forward Stock, Support Spares, Test Equipment, and other repositories to ensure alignment and consistency.\n \n Network Configuration Management\n \n, • Maintaining repository for network, device and software configurations.\n, • Maintain the process to check that CMDB accurately reflects the installed Firmware and software on network assets.\n, • Manage discrepancies between data and installed configuration.\n, • Establish process with Provisioning Team for using and recording gold configurations.\n, • Track configuration changes on Network Assets.\n \n Information Governance and Data Quality\n \n, • Establish and maintain the Asset Information Register (Data Dictionary) to document data sources, ownership, and refresh frequency.\n, • Implement data quality routines, metrics, and controls to proactively identify and resolve data issues.\n, • Grade and prioritize data quality issues based on business and safety impact to ensure that high-value risks are addressed promptly.\n, • Ensure data management processes meet governance standards and audit requirements.\n \n Analytics and Reporting\n \n, • Deliver bespoke analytics and dashboards using Qlik Sense to provide insights into asset lifecycle, data quality, and configuration status.\n, • Support the migration of reporting from QlikView to Qlik Sense, ensuring improved visualization and accessibility.\n, • Produce periodic and adhoc reports on product lifecycle, supportability, and configuration compliance for key stakeholders.\n \n Stakeholder Engagement and Continuous Improvement\n \n, • Work collaboratively with internal and external stakeholders to define standard methods of recording support contract details within Remedy ITSM.\n, • Ensure continuous alignment between business, data, and technical teams regarding data requirements and standards.\n, • Drive ongoing improvements in asset and data management processes through the Continual Service Improvement framework.\n, • Provide internal subject matter expertise (SME) for data, configuration, and product catalogue management.\n \n Skills, Knowledge and Experience\n \n, • Systems & Tools Handson experience with Remedy CMDB/ServiceNow/ITSM, Qlik Sense/PowerBI and data migration projects.\n, • Data Quality Strong background in data validation, profiling, and data governance.\n, • Analytics Capable of creating visual reports and insights in Qlik Sense (or similar BI tools).\n, • Stakeholder Management Proven ability to work crossfunctionally across business, technology, and supplier teams.\n, • Domain Experience Telecommunications, transport infrastructure, or technology environment preferred.\n, • Certifications (Desirable) ITIL Foundation, Data Management, or Information Governance qualification.\n \n Personal Attributes\n \n, • Analytical and detailoriented, with strong documentation skills.\n, • Selfstarter capable of working independently and managing priorities.\n, • Strong communicator, able to engage and influence technical and business stakeholders.\n, • Able to work under pressure and deliver to tight deadlines.\n, • 26 days holiday, plus public holidays, and the option to buy or sell days annually\n, • Car Allowance\n, • Company pension scheme\n, • A range of family friendly policies\n, • Occupational health support and wellbeing Portal\n

\n Asset Manager\n \n Hybrid/Birmingham/Remote \n Role Purpose\n The Asset Manager will report to the Data Architect Manager and is responsible for ensuring that NRTS product and configuration data is accurate, consistent, and complete across all systems. This role manages the Product Catalogue, implements the Information Asset Register, and ensures data governance and obsolescence processes are executed effectively for mainly hardware assets. The post holder provides subject matter expertise across internal and external stakeholders to ensure data assets are fit for purpose and deliver measurable business value. This role underpins the accuracy, reliability, and compliance of NRTS configuration and asset data. The successful candidate will enable the business to make informed decisions, optimise asset lifecycle management, and maintain operational resilience through trusted and governed data. \n Key Responsibilities\n Product Catalogue & Asset Management\n \n • Populate and maintain the NRTS Product Catalogue with all known versions, specifications, and associated support asset data.\n, • Provide accurate, periodic reports on the supportability and lifecycle status of NRTS assets.\n, • Maintain the accuracy and completeness of all asset and service records used on the NRTS programme.\n \n Obsolescence and Configuration Processes\n \n, • Collaborate with the Logistics Manager, CRM Manager, and Release Manager to review and enhance the Obsolescence Management process and related procedures.\n, • Identify and manage risks relating to asset end-of-life and end-of-support.\n, • Establish and maintain consistent policies and procedures to ensure configuration data is accurate, secure, and contractually compliant.\n, • Manage and maintain multiple NRTS datasets including Forward Stock, Support Spares, Test Equipment, and other repositories to ensure alignment and consistency.\n \n Network Configuration Management\n \n, • Maintaining repository for network, device and software configurations.\n, • Maintain the process to check that CMDB accurately reflects the installed Firmware and software on network assets.\n, • Manage discrepancies between data and installed configuration.\n, • Establish process with Provisioning Team for using and recording gold configurations.\n, • Track configuration changes on Network Assets.\n \n Information Governance and Data Quality\n \n, • Establish and maintain the Asset Information Register (Data Dictionary) to document data sources, ownership, and refresh frequency.\n, • Implement data quality routines, metrics, and controls to proactively identify and resolve data issues.\n, • Grade and prioritize data quality issues based on business and safety impact to ensure that high-value risks are addressed promptly.\n, • Ensure data management processes meet governance standards and audit requirements.\n \n Analytics and Reporting\n \n, • Deliver bespoke analytics and dashboards using Qlik Sense to provide insights into asset lifecycle, data quality, and configuration status.\n, • Support the migration of reporting from QlikView to Qlik Sense, ensuring improved visualization and accessibility.\n, • Produce periodic and adhoc reports on product lifecycle, supportability, and configuration compliance for key stakeholders.\n \n Stakeholder Engagement and Continuous Improvement\n \n, • Work collaboratively with internal and external stakeholders to define standard methods of recording support contract details within Remedy ITSM.\n, • Ensure continuous alignment between business, data, and technical teams regarding data requirements and standards.\n, • Drive ongoing improvements in asset and data management processes through the Continual Service Improvement framework.\n, • Provide internal subject matter expertise (SME) for data, configuration, and product catalogue management.\n \n Skills, Knowledge and Experience\n \n, • Systems & Tools Handson experience with Remedy CMDB/ServiceNow/ITSM, Qlik Sense/PowerBI and data migration projects.\n, • Data Quality Strong background in data validation, profiling, and data governance.\n, • Analytics Capable of creating visual reports and insights in Qlik Sense (or similar BI tools).\n, • Stakeholder Management Proven ability to work crossfunctionally across business, technology, and supplier teams.\n, • Domain Experience Telecommunications, transport infrastructure, or technology environment preferred.\n, • Certifications (Desirable) ITIL Foundation, Data Management, or Information Governance qualification.\n \n Personal Attributes\n \n, • Analytical and detailoriented, with strong documentation skills.\n, • Selfstarter capable of working independently and managing priorities.\n, • Strong communicator, able to engage and influence technical and business stakeholders.\n, • Able to work under pressure and deliver to tight deadlines.\n, • 26 days holiday, plus public holidays, and the option to buy or sell days annually\n, • Car Allowance\n, • Company pension scheme\n, • A range of family friendly policies\n, • Occupational health support and wellbeing Portal\n

\n Asset Manager\n \n Hybrid/Birmingham/Remote \n Role Purpose\n The Asset Manager will report to the Data Architect Manager and is responsible for ensuring that NRTS product and configuration data is accurate, consistent, and complete across all systems. This role manages the Product Catalogue, implements the Information Asset Register, and ensures data governance and obsolescence processes are executed effectively for mainly hardware assets. The post holder provides subject matter expertise across internal and external stakeholders to ensure data assets are fit for purpose and deliver measurable business value. This role underpins the accuracy, reliability, and compliance of NRTS configuration and asset data. The successful candidate will enable the business to make informed decisions, optimise asset lifecycle management, and maintain operational resilience through trusted and governed data. \n Key Responsibilities\n Product Catalogue & Asset Management\n \n • Populate and maintain the NRTS Product Catalogue with all known versions, specifications, and associated support asset data.\n, • Provide accurate, periodic reports on the supportability and lifecycle status of NRTS assets.\n, • Maintain the accuracy and completeness of all asset and service records used on the NRTS programme.\n \n Obsolescence and Configuration Processes\n \n, • Collaborate with the Logistics Manager, CRM Manager, and Release Manager to review and enhance the Obsolescence Management process and related procedures.\n, • Identify and manage risks relating to asset end-of-life and end-of-support.\n, • Establish and maintain consistent policies and procedures to ensure configuration data is accurate, secure, and contractually compliant.\n, • Manage and maintain multiple NRTS datasets including Forward Stock, Support Spares, Test Equipment, and other repositories to ensure alignment and consistency.\n \n Network Configuration Management\n \n, • Maintaining repository for network, device and software configurations.\n, • Maintain the process to check that CMDB accurately reflects the installed Firmware and software on network assets.\n, • Manage discrepancies between data and installed configuration.\n, • Establish process with Provisioning Team for using and recording gold configurations.\n, • Track configuration changes on Network Assets.\n \n Information Governance and Data Quality\n \n, • Establish and maintain the Asset Information Register (Data Dictionary) to document data sources, ownership, and refresh frequency.\n, • Implement data quality routines, metrics, and controls to proactively identify and resolve data issues.\n, • Grade and prioritize data quality issues based on business and safety impact to ensure that high-value risks are addressed promptly.\n, • Ensure data management processes meet governance standards and audit requirements.\n \n Analytics and Reporting\n \n, • Deliver bespoke analytics and dashboards using Qlik Sense to provide insights into asset lifecycle, data quality, and configuration status.\n, • Support the migration of reporting from QlikView to Qlik Sense, ensuring improved visualization and accessibility.\n, • Produce periodic and adhoc reports on product lifecycle, supportability, and configuration compliance for key stakeholders.\n \n Stakeholder Engagement and Continuous Improvement\n \n, • Work collaboratively with internal and external stakeholders to define standard methods of recording support contract details within Remedy ITSM.\n, • Ensure continuous alignment between business, data, and technical teams regarding data requirements and standards.\n, • Drive ongoing improvements in asset and data management processes through the Continual Service Improvement framework.\n, • Provide internal subject matter expertise (SME) for data, configuration, and product catalogue management.\n \n Skills, Knowledge and Experience\n \n, • Systems & Tools Handson experience with Remedy CMDB/ServiceNow/ITSM, Qlik Sense/PowerBI and data migration projects.\n, • Data Quality Strong background in data validation, profiling, and data governance.\n, • Analytics Capable of creating visual reports and insights in Qlik Sense (or similar BI tools).\n, • Stakeholder Management Proven ability to work crossfunctionally across business, technology, and supplier teams.\n, • Domain Experience Telecommunications, transport infrastructure, or technology environment preferred.\n, • Certifications (Desirable) ITIL Foundation, Data Management, or Information Governance qualification.\n \n Personal Attributes\n \n, • Analytical and detailoriented, with strong documentation skills.\n, • Selfstarter capable of working independently and managing priorities.\n, • Strong communicator, able to engage and influence technical and business stakeholders.\n, • Able to work under pressure and deliver to tight deadlines.\n, • 26 days holiday, plus public holidays, and the option to buy or sell days annually\n, • Car Allowance\n, • Company pension scheme\n, • A range of family friendly policies\n, • Occupational health support and wellbeing Portal\n

Job Title Electrical Project Manager Location This role is based at our head office in Tipton, West Midlands but will be working on UK-wide projects with travel required Our Company Doocey Group is a well-established utility and civil-engineering contractor with over 40 years of industry experience. Over the past five years, the business has delivered significant growth, doubling its turnover through consistent delivery of high-quality work for major clients, including National Grid and South Staffordshire Water. The Group’s success is underpinned by strong delivery capability, an experienced leadership team and a highly engaged workforce, enabling continued organic growth and long-term client partnerships. We are now looking to expand our Electrical Project Management capability and are seeking an experienced Project Engineer with a strong electrical background, gained within a contracting environment and/or through working on DNO-led projects. The Role The Project Manager will have responsibility for the delivery of LV and HV electrical projects, overseeing all phases of execution in accordance with client requirements for ICP, Customer and DNO works. This includes project costing, planning, implementation and close-out across the client contract, while ensuring full compliance with safety standards and regulatory requirements. Responsibilities • Manage project creation, including defining technical scope and costings, working collaboratively with other departments where required, • Develop and manage project plans to ensure delivery to agreed time, cost and quality requirements, • Arrange and manage subcontract works in line with defined specifications, budgets and programme requirements, • Act as the primary interface with the client / Adopting Utility, ensuring works are delivered and handed over to the required specification, • Carry out and manage site audits to ensure compliance with client’s requirements, company policies, safety standards and regulatory obligations, • Oversee streetworks compliance, ensuring all sites are cleared to the required standard and mitigating the risk of Section 74 and Fixed Penalty Notices, • Review defects and non-conformance reports, identifying potential rejections at an early stage and escalating appropriately to ensure timely resolution, • Support effective resource planning to meet client delivery requirements, including attendance at planning meetings Personal Qualities • Strong leadership and authority, • Excellent communication skills, • Highly organised and detail-focused, • Commercially aware, • Strong safety and compliance mindset, • Integrity and professionalism Technical Skills & Experience Essential • Proven experience leading and delivering high-voltage (HV) engineering projects across the full project lifecycle, • Direct experience working within a Distribution Network Operator (DNO) environment or delivering projects on behalf of, or in partnership with, a DNO Qualifications & Training Essential • HNC in Electrical Engineering, • Incorporated membership / working towards incorporated membership Salary Our salaries are competitive and reviewed regularly to ensure they remain fair and in line with the wider industry. Benefits • Company Car, • Private Medical Insurance, • Life Insurance (Death in Service) Additional Information Doocey Group value a diverse workforce and welcome applications form all sections of the community, regardless of any protected characteristics. Please note that we operate with a preferred supplier list and will not accept unsolicited CVs from recruitment agencies with whom we do not have an existing agreement. By submitting your application, you consent to Doocey Group retaining your CV, application details, and personal information for the purpose of considering you for current and future employment opportunities. Your information will be stored securely and will only be shared internally as necessary.

Gas Engineer Gas Service & Repair Location : Must be based in Dudley, Wolverhampton, Telfordor surrounding areas. You will receive a fully costed van and fuel card to support your daily operations Be Part of Something Bigger, join us in revolutionising how we power the planet £32,145.73 basic - Annual Pay Review and Profit-Sharing Scheme Full-Time, Permanent Contract Fully Costed Van & Fuel Card EV options available with free install at your home Renewables Upskill Potential (Net Zero Carbon) Local ByBox Allocation reducing daily travel and increasing additional earning potential Work Hard, Live Well Exceptional Benefits for our Engineers Employee Energy allowance and discount on HIVE products Company Funded Healthcare Plan PLUS Online GP24 Virtual Service Access to MyHealth with 24/7 MyCare phone line FREE Eye Test Voucher Centrica Benefits via the Offer Store Offers with high street partners and discounts Full Sick Pay following successful probationary period 25 days Holiday + Bank Holidays 24 Hour Support System & fully managed diary accessible via allocated field device Group Income Protection, Life Assurance & Accident Insurance Financial Education Legal Help Full Uniform & PPE Provided In this role you will carry out Gas Boiler Installations in Social Housing properties. Were searching for passionate Gas Engineers who are committed to quality and excellence. Join Our Team with Skills that Drive Innovation and Social Impact You will Hold a valid UK driving license with no more than 6 points Hold the Right to Work in the UK Hold 2 years minimum qualified experience Be ACS qualified, including CCN1, CENWAT, HTR1, & CKR1 Exhibit knowledge of all procedures and safety measures to PH Jones and British Gas standards whilst offering excellent customer service PH Jones was formed in 1963 and has continued to grow through the provision of excellent customer service, high quality delivery and an unrivalled focus on customer care. PH Jones was acquired by British Gas in 2011 and is a key member of the Centrica Plc , a FTSE 100 company. At Centrica we embrace diversity and actively seek to attract individuals with unique backgrounds and perspectives. To build a more sustainable future, we need the best team a team with a diverse mix of people and skills, where everyone feels welcome and able to succeed. TPBN1_UKTJ

Job Title: Gas Service and Repair Engineer Location: Dudley Salary: Price Per Job Job Type: Sub-Contract We are currently seeking a qualified Gas Engineer to join our team. The successful candidate will be responsible for installing, maintaining, and repairing gas systems and appliances for our clients in the Bradford area. Benefits: Full van stock supplied 3 days min commitment per week Responsibilities: Service, maintain, and repair gas systems and appliances, including boilers, heaters, and cookers Conduct safety checks and inspections to ensure systems are working efficiently and meet safety standards Diagnose and troubleshoot technical issues, identifying and resolving faults and defects Provide advice and guidance to clients on the use and maintenance of gas systems and appliances Keep accurate and up-to-date records of all work carried out Adhere to health and safety regulations and procedures at all times Maintain good communication with clients and team members Requirements: At least 2 years experience in a similar role Knowledge of gas systems and appliances, including boilers, heaters, and cookers Qualifications: CCN1, CENWAT, HTR1, CKR1 Own Van Own Tools Full UK driving licence Clean DBS TPBN1_UKTJ

Gearbox Fitter Location: Dudley, DY1 4DA Salary: Competitive Contract: Full time, permanent - 40 hours per week Benefits: Pension, 25 days holiday plus bank holidays, Life Assurance, Cash health care scheme - Paycare, Birthday Vouchers, EAP (Employee Assistant Programme) and Bike2Work Scheme ! Hayley 24/7 Engineering Services Ltd are now recruiting! Our purpose is to work with customers to maintain operations, increase efficiency, reduce total cost of ownership, and secure asset performance gains. We provide customers with quality round-the clock coverage for planned, predictive and reactive maintenance and repairs. Our main workshop is in Dudley, the capital of the industrial Black Country, West Midlands. This 35,000 sq. ft. facility houses the latest machinery, testing equipment and central functions, with a satellite facility in King's Lynn, Norfolk, specialising in electric motor rewinding and pump performance testing. We are now recruiting for a Gearbox Fitter to assume responsibility for dismantling, inspecting, repairing, and assembling a wide range of industrial gearboxes. You will produce accurate technical reports, ensure repairs meet high standards, and contribute to the smooth running of the workshop. As our Gearbox Fitter, you will be responsible for: Supporting daily workshop operations including quality, health & safety and environmental activities. Dismantling all types of industrial gearboxes and produce accurate inspection reports. Assembling gearboxes to a high standard, ensuring full readiness for installation. Interpreting engineering drawings, technical data and related documentation. Working independently, taking ownership of the accuracy and quality of your work. Identifying improvement opportunities and assist in problem-solving activities. Ensuring standard work practices and procedures are consistently followed. Responding to emergency breakdown situations when required. Undertaking additional related duties to support the smooth running of the department. In order to be successful in this role you must have / be: Apprenticeship in a relevant field or equivalent experience. Working knowledge of various gearbox types. Ability to follow instructions and work using your own initiative. Competent in selecting and using measuring/testing equipment to ensure accuracy. Ability to read and interpret engineering data and drawings. Strong problem-solving skills and a proactive approach. Health & safety, environmental or quality training is desirable but not essential. GCSE or equivalent education. Previous experience in gearbox repair or a similar mechanical engineering environment is an advantage. What We Offer: Be part of a successful, growing engineering group backed by a large multi-national organisation Join a supportive team that values accuracy, collaboration, and professional development Enjoy opportunities to grow your career in finance, with exposure to a broad range of accounting functions Work in an environment where your ideas and contributions really matter If you feel you have the skills and experience to be successful in this role then click on APPLY today! No agencies please. TPBN1_UKTJ

Electrical Winder Location: Dudley, DY1 4DA Salary: Competitive Contract: Full time, permanent - 40 hours per week Benefits: Pension, 25 days holiday plus bank holidays, Life Assurance, Cash health care scheme - Paycare, Birthday Vouchers, EAP (Employee Assistant Programme) and Bike2Work Scheme ! Hayley 24/7 Engineering Services Ltd are now recruiting! Our purpose is to work with customers to maintain operations, increase efficiency, reduce total cost of ownership, and secure asset performance gains. We provide customers with quality round-the clock coverage for planned, predictive and reactive maintenance and repairs. Our main workshop is in Dudley, the capital of the industrial Black Country, West Midlands. This 35,000 sq. ft. facility houses the latest machinery, testing equipment and central functions, with a satellite facility in King's Lynn, Norfolk, specialising in electric motor rewinding and pump performance testing. We are now recruiting for an Electrical Winder to provide support to the motor repair department by stripping and rewinding all types of AC/DC rotating electrical machinery. As our Electrical Winder, you will be responsible for: Involvement of day-to-day workshop in relation to quality, H&S and environmental activities Stripping and detailing of all types of winding circuits producing concise accurate reports for management. Undertake winding of coils for AC/DC motors, transformers, and other electrical equipment. Carry out repairs and rewinding of damaged or faulty electrical components. Apply insulation, varnishing, and impregnation processes to ensure durability. Conduct electrical testing (e.g., resistance, insulation, continuity) to verify quality. Interpret engineering data and documentation such as engineering drawings, technical data and computer-generated programmes. To be able to work under minimum supervision, taking responsibility for the quality and accuracy of the work you undertake. Be pro-active in finding solutions to problems and identifying areas for improving the business. Ensure standard work practices and procedures are being followed. Responding to emergency situations. In order to be successful in this role you must have / be: Apprenticeship in associated field or adequate experience. Health & safety, environmental or quality training would an advantage but not essential. Ability to work to instruction and on own initiative. Selecting and using a range of measuring and testing equipment to check components are to the required quality and accuracy. Read and interpret engineering data. To be able to demonstrate problem solving skills to solve and repair issues efficiently and effectively. GCSE or equivalent. Tool room experience advantageous. What We Offer: Be part of a successful, growing engineering group backed by a large multi-national organisation Join a supportive team that values accuracy, collaboration, and professional development Enjoy opportunities to grow your career in finance, with exposure to a broad range of accounting functions Work in an environment where your ideas and contributions really matter If you feel you have the skills and experience to be successful in this role then click on APPLY today! No agencies please. TPBN1_UKTJ

Enjoy a flexible temporary contract paying £30£34 per hour, with hybrid working, on-site parking, and the chance to lead a high-impact planned works programme in this rewarding interim Asset Manager role. This is a great opportunity to step into a respected, award-winning housing association in Dudley.You'll play a key role in shaping asset strategy, delivering planned and major works, and ensuring homes remain safe, compliant, and well-maintained. I'd love to see CVs from Asset Managers, Surveyors, Repairs & Maintenance Managers, or anyone with strong experience in planned works and property compliance. As an Asset Manager, you will be: Leading the planned, major works, and cyclical maintenance programme Managing the capital programme in line with the 5-Year Strategy, including retrofit and carbon net zero plans Overseeing reactive maintenance and ensuring cost-effective solutions Ensuring full compliance with health & safety, gas, electrical, and fire safety regulations Supporting and managing two direct reports (Health & Safety Officer and Asset Officer) Managing contractors and maintaining high-quality, value-for-money service Carrying out property inspections, overseeing voids, and monitoring estate functions Leading procurement activity and managing delegated budgets I'd love to speak to anyone with: At least 2 years' experience in surveying, repairs, or maintenance management A construction-related qualification such as ONC/HNC Strong knowledge of building construction, defects, and planned works Experience in procurement, budgeting, and compliance Excellent communication and customer-focused problem-solving skills What's on offer for the interim Asset Manager: £30£34 per hour Flexible working, including Friday from home On-site parking Supportive, collaborative team environment If this interim Asset Manager role sounds like your next step, apply now, or contact Jazmin on 07488 866 707 or email TPBN1_UKTJ

Job Title: Locum Environmental Health Officer - Food Safety Specialist Location: Sandwell, UK Salary: £45 per hour - Hourly Rate Contract: Full-time, 3-month contract Step into a dynamic role where you can make a significant impact on community health as a Locum Environmental Health Office

Job Title Manufacturing Engineer Job Type Permanent Salary - £40,000 p.a. (DOE) Working Hours: 08.00am 17.00pm (15:30pm finish on Fridays) Holiday entitlement: 25 days holiday + Bank holidays Additional Benefits: Company pension contribution On-site parking Due to continued growth Im currently recruiting for a Manufacturing Engineer to work with a well-established engineering company based near Halesowen. As the Manufacturing Engineer you will be responsible for overseeing the design and implementation of the production processes for the machine shop, youll also be responsible for improving on the efficiencies and quality of the production process. Duties of the Manufacturing Engineer: Reviewing production plan & minimising set up time on next jobs to be processed - Route card instructions / drawings are legible & understood. Analysing and reporting on production processes, methods, set up times, cycle times, - Map current process (workflow & work study on production runners.) - Analyse / evaluate actual process / times against standards - Establishing an effective work sequence / workflow strategy - Implement best practice to improve efficiency (change standard) Set up structured program vaults on CNC machines Evaluating quality control processes and making recommendations for improvements Ensuring that the companys manufacturing processes comply with relevant policies/procedures and Customer requirements /regulations Audit / verify to ensure employees are following route card instructions & procedures while operating the equipment Reviewing and calculating the costs of the different tools and equipment in the production process and predicting the overheads in future production requirements Assist in minimising downtime of the equipment by: - - Coordinating maintenance and repair services around production schedules /production windows. - Ensuring Operator TPM checks / actions are done - If trained, cover employee absence Remain up to date on the most recent developments & advancements in machining processes & technology. Assist in defining essential safety protocols & identify, document & report unsafe situations /routines. The successful candidate for the Manufacturing Engineers position will have the following experience: 3 5 years experience working as a Manufacturing Engineer within a CNC Environment (Essential) In-depth knowledge of manufacturing and production processes (Essential) Ability to write and deliver SOPs (Essential) Experience within heavy engineering (Desirable) Due to the high number of applications we receive, we are sometimes not able to respond directly to each candidate. If you havent been contacted within 14 days of your application, unfortunately you have been unsuccessful on this occasion. By applying for this role your details will be submitted to Next Generation and the relevant client related to this vacancy. Next Generation work in partnership with businesses across the UK who operate within Manufacturing, Logistics & Commercial sectors. We provide permanent and contract opportunities engaging with talented candidates looking to make their next career move. TPBN1_UKTJ

Title: Gas Engineer (Dudley, West Midlands)Location: Dudley, West Midlands, West Midlands, West Midlands, UKCompany: Rock managed servicesJob Description:Subcontract Domestic Gas Service & Repair EngineerLONG TERM SUBCONTRACT OFFERLocation:Local work within your areaType:Subcontractor / Self-Employed (35 days per week, flexible schedule)Payment:Weekly pay competitive rates per completed jobAbout the RoleRock Recruitment is looking for experiencedDomestic Gas Service & Repair Engineersto carry out work on behalf ofa leading private housing clientThis role involves servicing, diagnosing, and repairing domestic gas appliances and heating systems in residential properties. It offers flexibility, a guaranteed local workload, and competitive weekly pay an excellent opportunity for self-employed professionals seeking consistent and rewarding work in their area.What We OfferGuaranteed local workload minimise travel time and stay within your areaAll parts supplied no upfront stock costsCompetitive weekly payFlexible scheduling to suit your lifestyleQuick and straightforward onboarding processLong-term contract opportunities with a trusted providerKey ResponsibilitiesService, diagnose, and repair domestic gas appliances (boilers, cookers, fires)Ensure all work complies with Gas Safe regulationsFollow company health, safety, and safeguarding policiesEssential Requirements(Applications will only be considered if you meet the following criteria)ValidDomestic ACSqualifications includingHTR1 (Gas Fires)andCKR1 (Gas Cookers)Gas Safe RegistrationOwn van and toolsClean, validDBS certificatePublic Liability Insurance(minimum £2 million)Minimum2 years experiencediagnosing and repairing domestic gas boilers/appliancesTPBN1_UKTJ

A leading safety management consultancy is seeking a Head of Health and Safety Operations for an interim role based in London. Responsibilities include leading the safety strategy, overseeing compliance with health and safety legislation, and managing a dedicated team. This leadership position requi

A public services organisation in Merton seeks a Street Cleansing Health and Safety Manager on a contract basis. This mid-senior level role involves leading health and safety compliance for street cleansing operations, conducting risk assessments, and providing expert advice to staff. The successful

The role involves providing health and safety advice, conducting risk assessments, and performing audits on construction sites. A leading consultancy in the renewable energy sector is seeking an H&S Consultant for a rolling contract in Essex/Kent.

A recruitment agency seeks a Senior Electrical Engineer in Westminster for a temporary role, offering £227.The successful candidate will ensure electrical systems are safe and compliant, lead inspections, and produce technical reports.Experience in managing electrical risks and a solid understandin

A recruitment agency is seeking an interim Food Safety Officer to assist clients with Food Hygiene Inspections in Essex. This is an exciting opportunity for qualified candidates to make a significant impact in food safety standards.

A prominent charitable foundation is seeking a Health and Safety Manager on a 1-year fixed-term contract. The role is responsible for enhancing the health and safety framework, ensuring compliance with legislation, and overseeing the development of a new safety portal.