Trabajos electrical training en WiganCrear alertas

HGV / Trailer FitterWe are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance.Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK.This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems.Key Responsibilities • Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment., • Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults., • Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements., • Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear., • Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery., • Complete all maintenance records and inspection documentation accurately., • Ensure all work is completed safely and in accordance with company procedures and industry regulations., • Support breakdown response and emergency repairs when required., • Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules.About You, • Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role., • Relevant engineering qualification, apprenticeship, or time-served experience., • Strong understanding of HGV and trailer maintenance practices., • Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics., • Ability to diagnose faults and carry out repairs independently., • Knowledge of DVSA inspection standards and vehicle compliance requirements., • Welding and fabrication experience would be advantageous., • Strong attention to detail and commitment to safe working practices., • Full UK driving licence (HGV licence advantageous but not essential)., • Positive attitude with the ability to work both independently and as part of a team.What's on Offer, • Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week, • Long-term career stability within a well-established engineering operation., • Exposure to a varied fleet of HGVs, trailers, and specialist equipment., • Ongoing training and development opportunities., • Company pension scheme., • Life assurance and additional employee benefits., • Employee rewards and recognition programme., • Annual bonus schemeImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

About the Position The Associate Principal is a mid-level engineering role responsible for leading small- to mid-scale, multi-discipline projects with growing independence. You’ll guide projects from programming through closeout—clarifying requirements, coordinating design, documenting decisions, and ensuring deliverables meet TEECOM’s standards for quality and constructability. You’ll apply strong engineering judgment, maintain alignment with scope, schedule, and budget, and surface risks early to keep projects on track. You’ll strengthen TEECOM’s system by contributing to GitHub, documenting client-specific nuances, and improving standards, tools, and workflows. Externally, you’ll cultivate strong client relationships—building trust through clear communication, reliable follow-through, and thoughtful problem-solving. You’ll also begin developing credibility through thought-leadership activities by supporting pursuits, contributing technical narratives, participating in interviews, and helping develop content such as blogs, white papers, or presentations. Internally, you’ll mentor Designers and engineers through hands-on guidance, reviews, and feedback that strengthen discipline capability and reinforce TEECOM’s standards. While not a people manager, you’ll play a key role in developing TEECOM’s talent and reinforcing disciplined engineering practices. This position reflects strong engineering capability, reliable project leadership, and growing influence in shaping TEECOM’s systems, documentation, and delivery. • As an Associate Principal, your impact comes not only from the quality of your own discipline work, but from how effectively you guide project teams, strengthen coordination, and support the growth of TEECOM’s engineers. You contribute in three key ways:Mentor and Support Engineers, • You strengthen project teams by guiding Designers and Associates, reinforcing disciplined design practices, clear documentation, and sound technical judgment., • You contribute to TEECOM’s talent pipeline by serving as either a Mentor or a Mentee—helping grow others while also expanding your own capability., • As a Mentor: You accelerate others’ growth by setting expectations, providing clear direction, and reinforcing disciplined, high-quality work., • As a Mentee: You advance your own development by actively seeking feedback, applying guidance, and building readiness for larger scopes and leadership responsibilities.Contribute to Training and Knowledge, • You elevate team capability by actively engaging in design reviews, debriefs, and cross-discipline discussions that improve shared understanding and decision-making., • You strengthen discipline consistency by offering insights and clarification that help teammates apply standards correctly and develop stronger engineering judgment., • You support TEECOM’s learning culture by modeling disciplined documentation, fostering collaborative problem-solving, and shaping training resources that accelerate the growth of Designers and engineers.Improve the TEECOM System, • You reinforce firmwide consistency by applying standards reliably and maintaining clear, accurate discipline documentation that others can depend on., • You strengthen workflows by identifying gaps in templates, tools, or processes and offering improvements—through constructive feedback and Pull Requests—that reduce rework and improve scalability., • You enhance project predictability by sharing lessons learned, reinforcing best practices, and helping teams stay aligned and clear in their approach., • You deliver accurate, well-coordinated discipline designs on mid- to large-size projects with increasing independence and reliable follow-through., • You apply strong judgment—identifying risks early, resolving discipline conflicts, and supporting cross-discipline coordination., • You maintain disciplined documentation across drawings, specifications, calculations, and decision logs, enabling predictable project delivery., • You improve TEECOM’s system by providing actionable feedback, proposing workflow refinements, and submitting targeted Pull Requests., • You communicate clearly with clients and design partners—documenting decisions, clarifying requirements, and keeping teams aligned., • You mentor Designers, Associates, and production by providing guidance, markups, and timely feedback that strengthens their technical capability and documentation habits., • You collaborate closely with Project Leads and Group Leads to maintain alignment on scope, sequencing, and coordination strategy., • You support pursuits by contributing scope input, fee assumptions, and participating in interviews as needed., • You actively participate in client relationship development through networking events and conferences, direct outreach to clients and partners, and sharing intel gathered through documented interactions., • You deepen your discipline expertise through mentorship (as Mentor or Mentee), preparing for broader leadership responsibilities., • You model TEECOM’s Core Values—Care, Trust, and Value—through clear communication, disciplined execution, and proactive problem-solving., • These responsibilities and expectations represent what is required to successfully perform the essential functions of this role.Annual and Quarterly, • Partner with Project Leads, Group Leads, and senior engineers to strengthen coordination strategy, discipline consistency, and delivery reliability across projects., • Participate in performance assessments and demonstrate measurable growth in engineering judgment, project leadership, and system contribution., • Lead technical design reviews that reinforce TEECOM standards, improve documentation clarity, and identify coordination risks early., • Contribute to discipline standards, workflows, and tools through targeted Pull Requests and documented lessons learned., • Strengthen team capability by mentoring Designers and engineers through clear technical guidance, markups, and feedback., • Identify recurring coordination challenges or workflow gaps and recommend improvements that enhance delivery predictability and cross-discipline alignment., • When serving as a Mentor, provide structured quarterly feedback that supports technical growth and readiness for increased project leadership.Monthly and Biweekly, • Deliver coordinated discipline designs including layouts, calculations, specifications, and supporting documentation that align with engineering intent and TEECOM standards., • Partner with Project Leads to confirm scope, sequencing, coordination strategy, and evolving client requirements., • Participate in project and discipline meetings, communicating decisions, constraints, risks, and next steps with clarity., • Review Designers’ and engineers’ work, providing guidance that strengthens technical accuracy, coordination alignment, and documentation quality., • When assigned as a Mentor, delegate meaningful scope, clarify expectations, provide structured feedback, and hold regular check ins that strengthen technical growth, documentation habits, and decision making., • Maintain clear documentation of decisions, assumptions, and client specific nuances across GitHub and project tools to support consistent delivery., • Review discipline progress against scope, schedule, and coordination milestones and surface risks early to support Project Leads in maintaining alignment., • Maintain accurate and timely time and expense entries that support delivery accountability.Weekly and Daily, • Prepare and review layouts, markups, calculations, and related deliverables, resolving discipline-specific issues with sound engineering judgment., • Participate in coordination meetings, clearly communicating impacts, decisions, and required follow-up actions., • Provide guidance to Designers and engineers by clarifying expectations, reinforcing documentation standards, and supporting informed decision-making., • Maintain clear, up-to-date documentation across Asana, GitHub, and shared project platforms to support delivery alignment., • Execute design and documentation tasks with increasing independence while maintaining alignment with TEECOM standards and project priorities., • Communicate proactively with cross-discipline partners to confirm assumptions, surface risks early, and maintain coordination clarity., • Keep project notes, markups, and documentation current as work progresses to ensure transparency and continuity.As Needed, • Support programming sessions, site walks, surveys, or construction-phase coordination, documenting findings clearly to maintain alignment with design intent., • Contribute to pursuits by developing discipline scope assumptions, OPCC inputs, and interview support as needed., • Research products, codes, and design approaches that strengthen technical solutions and coordination outcomes., • Support other teams during heavy workload periods or complex project phases to maintain firmwide delivery momentum., • When assigned as a Mentee, meet regularly with your Mentor to review feedback, discuss project decisions, and strengthen technical judgment and discipline expertise., • Supervisory: When serving as a Mentor, you provide structured coaching and quarterly performance feedback for assigned mentees. You support day-to-day discipline execution by aligning Designers, engineers, and production team members with project priorities, scope, and documentation standards, while identifying dependencies, risks, and resourcing needs that inform workload planning., • Mentorship: Provide hands-on coaching and design guidance to Designers and engineers assigned to your projects. When paired as a Mentor, you hold regular check-ins, clarify expectations, review progress, and contribute input to quarterly and annual performance assessments. You reinforce disciplined documentation, communication, and coordination practices through clear guidance and example., • Training: Support the development of training content, participate in design reviews, and help team members strengthen technical and documentation skills through practical, project-based coaching., • Education: Bachelor’s degree in Engineering (Electrical preferred) or equivalent experience., • Experience: 6+ years of experience in AEC or related professional services with demonstrated discipline-specific capability. (ICT, Audiovisual, AV, Acoustics), • Preferred: Experience leading discipline portions of mid- to large-size projects, supporting coordination, and providing guidance to Designers or engineers., • Proven ability to deliver accurate, well-coordinated designs and make sound decisions within your discipline., • Strong understanding of project delivery workflows, client expectations, documentation standards, and cross-discipline coordination requirements., • Demonstrated experience contributing to documentation updates, standards refinement, or QA/QC workflows through GitHub Pull Requests or similar platforms., • Strong proficiency in Autodesk (AutoCAD, Revit), Bluebeam Studio, Microsoft 365 Suite, Google Workspace, and GitHub.Industry certifications preferred by discipline:, • CTS-D (Audiovisual) — preferred, • CDT — preferred, • EIT — plus, • PE — plus, • PMP — plus, • These physical demands represent what is required to perform the essential functions of this job. Reasonable accommodations will be provided as needed., • Prolonged desk work using a computer, keyboard, mouse, and telephone., • Regular reading, writing, and communication in virtual and in-person settings., • Occasional travel to client sites for meetings, surveys, or inspections., • Site walks may require standing or walking for extended periods, climbing stairs, and navigating construction or utility areas., • Field activities may involve bending, kneeling, or maneuvering in confined spaces., • May occasionally lift or move equipment weighing up to 25 pounds., • These work environment characteristics represent the conditions encountered while performing essential job functions. Reasonable accommodations will be provided as needed., • Approximately 75% of work is performed in a remote or office environment using standard office equipment., • Approximately 25% occurs at client sites, including construction environments and existing facilities., • Construction sites may include exposure to elevated noise levels, dust, uneven or unfinished walking surfaces, variable lighting conditions, and active construction operations., • Utility rooms and similar spaces may have restricted access or may not fully comply with ADA accessibility standards. When access limitations exist, TEECOM will support coordinating reasonable accommodations with site-controlling contractor or alternative means to perform essential job functions., • All accidents, near misses, and unsafe conditions must be reported immediately to the site superintendent and internally to People Operations.£85,000 - £105,000 a yearThis compensation will vary depending on your role-related skills, experience, knowledge, and subject matter expertise. TEECOM is committed to making sure that we are the right fit for each applicant and that each applicant is the right fit for our team. As we get to know each other throughout the interview process, the compensation may vary within the stated range. TEECOM offers a comprehensive benefits package to support employees and their families, including medical, dental, and vision insurance for employees and their dependents, basic and voluntary life insurance, short-term and long-term disability coverage, a 401(k) plan with profit-sharing contributions, paid parental leave, lifestyle and legal benefits, pet benefits, and performance-based bonuses. Full-time exempt team members also enjoy flexible time off, and all employees receive nine scheduled paid holidays.Your level will be evaluated and determined during the interview process. We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas. NOTICE TO THIRD PARTY AGENCIES: Please note that TEECOM does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, TEECOM will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, TEECOM explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of TEECOM.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

TECHNICAL CUSTOMER SUPPORT SPECIALIST Salary: £30,000 Location: Northwich - hybrid Contract: Permanent Hours: Mon-Fri (08:00-17:00) or (08:30-17:30) This role is perfect for someone who thrives on helping others and enjoys the challenge of providing expert technical advice across a diverse product range. You will be at the heart of customer interactions, supporting both clients and internal teams with your knowledge of the products. Job Spec: • Provide comprehensive technical support through telephone and ticketing systems, ensuring all queries are addressed promptly and accurately., • Deliver hotline and ticket-based assistance directly to customers, offering first-level qualification of complaints and processing goodwill requests up to specified limits., • Advise customers on technical and commercial matters via phone calls and live chat platforms, ensuring clear communication and effective solutions., • Support customers in selecting products, cross-referencing alternatives, especially during product releases or phase-outs, and identifying cross-selling opportunities., • Assist with service inquiries related to repairs, modifications, or replacement parts by providing detailed information and quotations for standard services., • Perform application tests as required, documenting results thoroughly to ensure transparency and knowledge sharing within the team., • Train new sales employees and trainees on technical aspects of products, fostering a culture of learning and collaboration across departments., • Document all customer contact data and activities accurately, • Initiate corrective actions when documentation errors are identified, contributing to continuous improvement in processes., • Feed the internal knowledge base with expert insights gained from daily interactions, supporting ongoing development for yourself and your colleagues. Person Spec: • A postgraduate with a qualification in Electrical Engineering is essential, • Experience or knowledge of Electrical Engineering experience, • Proficiency in using SAP or similar CRM systems Apply today by clicking on the link - take the first step towards joining a supportive team where your expertise truly matters. Keywords: customer support, technical expertise, electrical engineering, collaborative environment, problem-solving, training opportunities, flexible working opportunities, knowledge sharing Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates

Field Based Electrical Technician (Training on Solar) Local Patch - Commutable from: Yeovil, Taunton, Wellington, Chard, Bridgwater, Ilminster and Surrounding Areas) £34,000 - £38,000 + Bonus (5%) + Healthcare + Holidays (28 plus banks) + Company Benefits Are you a Time Served Electrician / Technician from an industrial / manufacturing or commercial background? Do you want a join an international renewable energy specialist offering full training on solar ground mount systems? This company is a leading solar power equipment specialist for the Renewable energy sector operating across the globe. This is a fantastic opportunity to join an expanding company offering an excellent package, life balance and the chance to progress technically. The Role: *Field Service Technician *Site Based *Installing/ Maintaining Ground Mount Solar Systems *Monday - Friday (Call Outs 1/4) The Person: *Electrician / Electrical Technician *Wanting training on Solar & HV Systems To apply for this role or for to be considered for further roles, please click "Apply Now". This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Recruitment Consultant - TROY EARL

Job Title - Workshop Team LeaderLocation - Bolton, Greater ManchesterSalary: £40,000 - £43,000Shift: Monday to Friday Days (40 Hours)Job Role:We're on the lookout for a hands-on Workshop Team Leader to take the reins of our fast-paced materials handling workshop. You'll lead a close-knit team of engineers, keeping day-to-day operations running like clockwork while driving high standards across maintenance, servicing and repairs of a wide range of Material Handling Equipment (MHE).This is a key leadership role where you'll balance people management with technical expertise - motivating your team, prioritising workloads, and making sure every job is done safely, efficiently and to the highest quality standards. If you thrive in a busy workshop environment and love leading from the front, this is your chance to make a real impact.Sector - Workshop EngineeringNon-Negotiable Requirements of Workshop Team Leader:Hands on Engineering/Maintenance ExperienceRequirements of Workshop Team Leader:Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles.Leadership or management experienceHave hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics.Recognised Engineering Qualification.Desirable Requirements of Workshop Team Leader:Previously held a role as a Workshop Engineer.The Workshop Team Leader will benefit from:Full Training and Induction SchemeCompany Pension SchemeTools providedMachinery Specific training programmes.If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.For further details contact Stash Rowszar at Pioneer SelectionAs a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.TPBN1_UKTJ

HGV / Trailer FitterWe are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance.Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK.This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems.Key ResponsibilitiesCarry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment.Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults.Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements.Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear.Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery.Complete all maintenance records and inspection documentation accurately.Ensure all work is completed safely and in accordance with company procedures and industry regulations.Support breakdown response and emergency repairs when required.Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules.About YouProven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role.Relevant engineering qualification, apprenticeship, or time-served experience.Strong understanding of HGV and trailer maintenance practices.Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics.Ability to diagnose faults and carry out repairs independently.Knowledge of DVSA inspection standards and vehicle compliance requirements.Welding and fabrication experience would be advantageous.Strong attention to detail and commitment to safe working practices.Full UK driving licence (HGV licence advantageous but not essential).Positive attitude with the ability to work both independently and as part of a team.What's on OfferCompetitive salary and overtime opportunities - 7.5 hours overtime guaranteed per weekLong-term career stability within a well-established engineering operation.Exposure to a varied fleet of HGVs, trailers, and specialist equipment.Ongoing training and development opportunities.Company pension scheme.Life assurance and additional employee benefits.Employee rewards and recognition programme.Annual bonus schemeImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.TPBN1_UKTJ

General Manager – Wigan £70-80k plus car allowance, day shifts 5 days a week, 08:30-17:00 ✅ Are you an experienced operational leader with a background in 2-person / final mile delivery, comfortable running large, fast‑moving environments with high standards? ✅ Do you enjoy bringing teams together, improving processes, and building a strong, positive workplace culture? ✅ Can you drive strategic change, deliver commercial results, and ensure every part of the operation runs safely and compliantly? ArrowXL is looking for a General Manager for our Wigan depot, where you’ll be empowered to make a real impact within our 2‑person home delivery operation, in a supportive, collaborative environment where continuous improvement is encouraged. In this role, you will lead the full operation of our Wigan hub and its outbases, ensuring exceptional service, a safe and compliant environment, and consistently high standards across warehouse, transport, and support teams. You’ll lead and develop large operational teams, embed a positive culture, and partner with internal and external stakeholders to strengthen collaboration, share best practice, and drive continual improvement. You will take ownership of budgets, efficiency, and site profitability while identifying opportunities for operational change and delivering projects that support future business needs. You’ll coach managers, challenge old ways of working, and maintain the flexibility to support the operation outside standard hours when required. If you're ready to lead a major operation, shape its culture, and drive meaningful improvement, we'd love to hear from you. For a confidential conversation, contact careers@arrowxl.co.uk - or apply today. What will the role involve? • Overall responsibility for ourWiganhub and associated outbases, including resourcing, health, safety and environment, legal/regulatory compliance, and service delivery., • Leading and inspiring large operational teams across warehouse, transport, and support functions, ensuring strong engagement and high performance., • Supporting our people to deliver great results by driving engagement, managing performance, and developing talent., • Cultivating a positive working environment and embedding our company values., • Leading, supporting, and coaching managers to lead their teams effectively., • Leading and supporting collaboration with service partners and sub‑contractors to ensure compliance and exceptional service delivery., • Collaborating with other departments and key stakeholders to share learnings and best practice., • Maintaining a safe working environment for all ArrowXL employees andvisitors, andcultivating a culture of safety across all areas of responsibility., • Delivering service excellence, improving efficiency, and meeting or exceeding KPIs., • Identifying, managing, and driving operational change projects to meet future and projected business needs., • Identifying improvement opportunities and delivering positive change., • Maximising site profitability and identifying/implementing cost‑saving initiatives. What are we looking for in our General Manager? • Strong operational background with excellent stakeholder management skills, and experience leading large teams in a warehouse or transport environment - ideally both., • Proven experience in a senior management role within 2-person home delivery, logistics, warehouse or transport operations., • Results‑driven and commercially minded, with experience managing budgets and controlling costs., • Project and change management experience, including successful delivery of major initiatives., • Ability to motivate and inspire large, diverse, and geographically dispersed teams., • Able to think strategically while maintaining strong attention to detail and a hands‑on approach, with the ability to interpret and summarise complex data to support effective decision‑making., • Manager CPC (preferred), along with IOSH/NEBOSH qualifications and experience working in unionised environments. What’s in it for you? What are the benefits? At ArrowXL, we’re always striving to make the world of delivery a better place. When you join us, you’ll receive a comprehensive salary and benefits package - but more than that, you’ll become part of an organisation that values collaboration, innovation, and personal growth. Some of the benefits of working with us include: • Annual Leave – 34 days entitlement (including statutory bank holidays) which increases with service, • Holiday Buy Scheme – Buy up to 5 additional days, • Competitive Pension Plan options – Plus company contributions, • Private Medical Insurance – via Bupa, • Life Insurance – Company funded 2x basic salary life cover from day one, • Medicash – An easy-to-use health insurance package that provides cashback towards your everyday healthcare bills, • Employee Assistance Programme – Free 24/7 confidential wellbeing support, • Progression and Development Opportunities – Department specific technical training and Internal Management Development Academies, • Staff Discount at _ (25% discount on designer branded clothing, footwear and home accessories with 15% off furniture, leisure and electrical items), • Discounted Gym Membership – Up to 25% discount across 3700 nationally located gyms, health clubs, leisure Centres, bootcamps and fitness studios, • Cycle to work scheme – In partnership with Halfords, the ArrowXL C2W scheme offers great benefits and discounts, • Long service awards – We go out of our way to recognise and reward our colleague commitment with our long service awards programme, • Employee of the month – Winners receive £25 voucher, certificate and Hall of fame recognition, • CEO Award of the month – Winners receive £100 voucher, certificate and Hall of fame recognition, • Departmental Incentives – Year-round departmental competitions, seasonal incentives and fantastic gifts, • Retail Discounts – Huge discount savings in supermarkets (Asda, Tesco, Morrison’s and Sainsburys), Fashion discounts with (Adidas, Asos, H&M, Boohoo, JD and Matalan) and Technology discounts with (Apple, Argos, Currys/PC World and John Lewis), plus many more savings How to Apply It’s quick and easy to apply online - just have your up-to-date CV ready and follow the step-by-step application process. We’re excited to hear from you! At ArrowXL, we’re proud to be an equal opportunity employer. We’re committed to creating an inclusive workplace where everyone can thrive, regardless of background. If you're invited to interview and need any adjustments during the process, please let us know - we’ll do everything we can to make your experience smooth and positive. We’re a business built on championing strong values. These guide everything we do - from how we deliver to how we support our people: Ready to make an impact? Apply now and take the next step in your career with ArrowXL!

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictionsRole Overview:Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term.Rates: £27.54 per hour PAYE or £37 per hour UmbrellaMonday - Friday 37 hours +The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem levelSpecific responsibilities include:Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level.Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme.Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements.Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications)Role requirements (skills, training and qualifications)HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test.A good understanding of measurement and test principles, and associated test equipment.An understanding of the typical CADMID product lifecycle for test equipment is desirable.An understanding of RF and microwave technology at subsystem level would be an advantage.An understanding of Environmental testing (including ESS) would also be an advantage.Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements.Proven analytical and problem solving skills, with strong attention to detail.The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.TPBN1_UKTJ

Heavy Plant FitterLocation: North West of EnglandHours: 40 hours per week (Monday-Friday)Salary: Excellent pay + overtime + benefitsAre you an experienced Plant Fitter looking to develop your career with a leading name in the heavy plant and construction machinery industry? This is a fantastic opportunity to join a well-established organisation working with premium earthmoving equipment renowned for quality, performance, and reliability.The RoleYou'll be responsible for the maintenance, repair, and overhaul of a wide range of heavy earthmoving machinery from excavators and dozers to wheel loaders and dump trucks. You'll diagnose and fix mechanical, hydraulic, and electrical issues, carry out component rebuilds, and ensure all work is completed to the highest standards.This is a workshop-based position offering excellent facilities, modern tooling, and a clean, well-organised environment.Key ResponsibilitiesService, repair, and maintain heavy plant and earthmoving machineryDiagnose faults and carry out repairs on engines, transmissions, hydraulics, and electrical systemsPerform full strip-downs and rebuilds where requiredEnsure all work is completed safely, efficiently, and to a high standardMaintain accurate service and inspection recordsWhat We're Looking ForProven experience working with heavy plant, construction, or earthmoving equipmentNVQ Level 3 (or equivalent) in Plant Maintenance, Mechanical Engineering, or similarStrong understanding of hydraulics, engines, and electrical systemsA proactive approach, attention to detail, and a commitment to quality and safetyWhat's on OfferExcellent pay reflective of experience40-hour working weekGenerous overtime scheme:First 4 hours paid at 1.5xAny additional hours paid at double time31 days annual leaveCompany pension schemeHealth cash plan and other great employee benefitsOngoing manufacturer-backed training and career developmentPlenty of progression opportunities within a supportive, growing organisationIf you're a skilled Plant Fitter with a passion for heavy machinery and want to join a company that truly values its people, offers great rewards, and invests in your future - this could be the perfect next step for you.Apply now to find out more and take your career forward maintaining world-class equipment.SER-INTPBN1_UKTJ

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract.Looking for somebody with substantial test engineering experience.Diagnosis of test failuresTesting experience down to component levelThe department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills.Hourly Rate: £37.00ph (Umbrella).Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Development and Production Test Engineer Electronic / Electrical Job Description:Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level.Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level.Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme.Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements.Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action.Role requirements (skills, training and qualifications):HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test.A good understanding of measurement and test principles, and associated test equipment.An understanding of the typical CADMID product lifecycle for test equipment is desirable.An understanding of RF and microwave technology at subsystem level would be an advantage.An understanding of Environmental testing (including ESS) would also be an advantage.TPBN1_UKTJ

Multi-Skilled Maintenance Technician – WiganPeople Solutions are currently recruiting for a confident and experienced Multi-Skilled Maintenance Technician to join our well-established client based in Wigan . This is a fantastic opportunity offering stable working hours and a supportive team environment.Shifts: Monday – Friday 6:00am - 3:00pmAnnual Salary: £36,000 - £42,000 dependant on experienceBenefitsAs a Multi-Skilled Maintenance Technician, you will receive:Dynamic and supportive team environmentFree on-site parkingCompany PensionDay-to-Day DutiesAs a Multi-Skilled Maintenance Technician, you will assist continuous smooth running of the manufacturing plant, your duties with include (but not limited to):Provide hands on technical support across mechanical and electrical control equipmentLead and coordinate all site maintenance activities to ensure safe, reliable and efficient plant operationsPlan and execute preventative maintenance schedulesLead daily maintenance activities, prioritising planned and reactive workDiagnose and resolve equipment faults quickly to minimise production downtimeManage contractors and ensure work is completed to the required standardsMaintain accurate maintenance records and reportsDrive reliability improvements and reduce downtime in a production environmentConduct root cause analysis investigations and provide continuous improvement initiativesDrive reliability improvements and reduce downtime in a production environmentWork collaboratively production teams to optimize performanceSupport and develop maintenance team membersEnsure all compliance with Health, Safety and environmental standardsEssential SkillsProven experience in a maintenance role within manufacturing, chemical or process industriesProactive and hands on approachStrong problem solving and fault-finding skillsSafety focused mindsetStrong communication and leadership skillsAbility to research and source equipment, parts and sparesContinuous improvement drivenConfident with using computers to keep and update maintenance recordsDesirable ExperienceElectrical and electronic experienceTrainingIndustry related training and ongoing support throughoutApply: If you are interested in this role as a Multi-Skilled Maintenance Technician, please apply today to be considered.People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process.TPBN1_UKTJ

Winterhalter is seeking experienced service technicians to join our team striving to deliver ‘Best in Class’ service to our valued customers. In particular, we are interested in identifying new technicians living in / able to service the areas in and around Twickenham and Kingston upon Thames, The role is generally independent but is supported by a Regional Operations Manager and an allocation team to schedule daily calls. Operating with the use of Company van (with reasonable private use) including fuel card, laptop, and mobile phone. Core hours are 40 hours per week (door to door), Monday to Friday, plus 12 Saturdays and 4 Sundays per calendar year based on a rota. Our service division is a customer-facing function in a very demanding industry; dealing with some of the leading restaurants in the UK as well as a variety of casual dining chains, hotels, educational establishments, hospitals, government buildings, and offices. Winterhalter’s growth agenda is reliant on the continuous improvement of our service offering to strengthen customer engagement and win new business. This role demands high standards of customer engagement to deliver commercially focused service to support the success of Winterhalter & Classeq brands and our valued customers in line with agreed service levels and targets. Main accountabilities Responsible for installation, service, and repair of commercial warewashing equipment such as under-counter, pass-through, and rack conveyor dishwashers. The goal is to drive service success that improves customer satisfaction, maximizes customer retention, increases profitability, and provides exemplary standards of service and customer support during field visits. Day to day activities: • Manage all on-site installation, diagnosis, repairs, and maintenance, • Diagnose errors and technical problems and determine appropriate solutions, • Produce timely and detailed service reports, • Document processes and follow company standard procedures and protocols, • Collaborate with the technical team and share information across the organisation, • Evaluate customer requirements and make appropriate recommendations, • Taking ownership and responsibility for the delivery of the agreed goals and targets:, • Response times, • First-time fix, • Customer satisfaction, • Stock management, • Productivity, • Effective teamwork Skill & experience required: • As technicians will be working with single and 3 phase equipment - electrical competence is essential, • Excellent written and verbal communication, • Strong analytical and problem-solving skills, • Ability to troubleshoot, test, repair, and service technical equipment, • Excellent organisation and computer skills, • Familiarity with mobile tools and apps, • Proven field service experience, • Direct experience in the warewash and/or catering industry is highly desirable The ideal person to suit this role: • Able to manage time and work under pressure to tight deadlines, • Able to manage the demands of numerous tasks, • Ability to adapt quickly in a rapidly changing environment, • Keen for new experiences, responsibility, and accountability, • Capability to coach customers in the effective use and maintenance of equipment, • Reliable, tolerant and determined, • Self-driven, positive outlook, clear focus and an empathic communicator, able to see things from the other person's point of view, • Willing to undertake further training to fulfill the requirements of the role, • Pays great attention to H&S protocols, • Is diligent in complying with reporting requirements Hours of work & benefits • Core hours: 40 hours per week, Monday to Friday, plus 12 Saturdays and 4 Sundays per calendar year based on a rota, • Competitive salary for core hours + potential overtime, • Company van (with use privately) including fuel card, • Comprehensive training, • 33 days annual leave - including bank holidays (increasing with length of service), • Pension & Life Assurance, • Lifeworks employee assistance plan and discount scheme, • Salary Sacrifice - Electrical Car Scheme, • Staff events Equal Opportunities employer

Lead Electrician (Training into Ground Mount Solar) Field Based - Covering: Peterborough, Corby, Cambridge, Spalding, Huntingdon, Downham Market and Surrounding Areas £40,000 - £45,000 + Car + Healthcare + Life Assurance + Bonus + Holidays (28 plus banks) Are you a qualified electrician (ECS Card), with previous experience working on commercial solar, looking to progress into ground mount solar sector? This is a fantastic opportunity to join a global market leading renewable energy leader, where you will be the 'go to' technical expert within the team, within a company offering further training and career development. The company are an engineering, procurement & construction specialist within the Renewables market, with a presence across the world. With major Solar farm developments across the Midlands / East Anglia, my client is looking for Lead O&M Engineer to join the team. In this role, you will be leading a team of technicians across varies solar farm developments. You will support with the maintenance schedules, be the 'go to' technical hands on engineer, commissioning of new farms and much more. The ideal candidate will be from a strong electrical solar background, with previous experience working on Inverter, Switch gear and HV systems. The Role: *Lead Solar O&M Engineer *Lead maintenance activities *Assist with commissioning activities *Field Based - Monday - Friday The Person: *Strong Operations & Maintenance electrical solar background *Electrically qualified / time served *Full UK Driving License To apply for this role or for to be considered for further roles, please click "Apply Now". This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Recruitment Consultant - TROY EARL

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? Join our Transmission & Distribution team and work on engineering and construction projects in private, industrial, transmission/distribution, and renewables sectors. This role will give you the opportunity to become part be part of an innovative design team, responsible for delivering practical electrical design solutions throughout the project lifecycle. You will also get to work under the guidance of the project technical lead, as well as provide guidance to junior staff such as graduates and apprentices. Here’s what you’ll do: • Carry out Medium Voltage and Low Voltage network design work to DNO Standards, • Provide distribution Open and Closed Ring and Radial feeder supply network solutions, • Carry out Medium Voltage and Low Voltage Intake and Distribution Substation Layout design, as well as main primary plant and equipment design, • Provide secondary protection and control solutions, digesting equipment scheme circuit and wiring diagrams, • Provide Medium Voltage and Low Voltage cable sizing calculations, routing, section, and termination drawings, • Produce electrical system, earthing grid design and modelling, and calculations for touch, step and transfer potential, • Undertake SCADA System, Auxiliary supply and COP metering interface designs, • Provide Medium Voltage and Low Voltage Local Standby and Back-up power supply (automatic and manual changeover solutions), • Write technical specifications and support with the down selection and placing of equipment orders/Procurement, • Liaise and collaborate with external suppliers and customers, • Provide input into electrical system studies for Low voltage and Medium voltage network modelling and verification, • Provide Arc-flash / Blast requirements and mitigation solutions, • Review design submissions within the team against client scope, • Be part of a design review process with Team Lead Verifier Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Degree or relevant qualification in Electrical Engineering, • Knowledge of British, European and DNO specific design standards, • Knowledge and Understanding of Protection Setting co-ordination and grading, • A proven track record as a Trainee or Assistant Electrical Engineer, or completion of a Graduate Training programme post degree in both a design office and/or a construction environment within the Energy /Power Sector, • Understanding of functional characteristics of Power Systems, • Ability of working with internal and external parties and working within a strong team-working culture, • Experience in writing clear and concise documentation Desirable experience: • Experience of working under engineering design governance structure, • Experience of preparing pre-construction information, carrying out design risk assessments, design risk review and knowledge of CDM regulations, • Experience in MV & HV cable design, • Experience in Protection & Control We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to lead a dynamic team of talented engineers and shape the future of energy infrastructure? AECOM is recruiting for an experienced Principal Electrical Engineer to join our UK&I Transmission and Distribution (T&D) department. Here's what you'll do: • The primary objective of this role is to lead a team in the development and delivery of distribution network design., • You'll be providing technical expertise into bids and proposals and to represent the Company in client meetings as appropriate., • You will lead and develop the distribution team and will have line management responsibility for those staff. Typical distribution engineering activities (related to T&D projects) include: • Low voltage and medium voltage (up to 33kV) network design, • Low voltage and medium voltage cable sizing, routing and termination, • Electrical system earthing design such as;, • Earth grid design and modelling, • Understanding of touch, step and transfer potential, • Earthing and bonding requirements, • Carrying out design work to DNO, Defense and private network standards, • Review of design packages carried out by others within the distribution team, • Compliance and assurance design reviews of 3rd party design packages, • Carrying out owners engineer role on projects reviewing designs on behalf of clients, • Input into electrical system studies for LV and MV networks. Inputs such as:, • Network configuration, • Operating scenarios, • Protection requirements, • Arc flash requirements Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Degree or relevant qualification in Electrical Engineering, • Knowledge of British, European and DNO specific design standards, • Knowledge and Understanding of Protection Setting co-ordination and grading, • A proven track record as a Trainee or Assistant Electrical Engineer, or completion of a Graduate Training programme post degree in both a design office and/or a construction environment within the Energy /Power Sector, • Understanding of functional characteristics of Power Systems, • Ability of working with internal and external parties and working within a strong team-working culture, • Experience in writing clear and concise documentation, • Experience leading/mentoring junior team members Desirable experience: • Experience of working under engineering design governance structure, • Experience of preparing pre-construction information, carrying out design risk assessments, design risk review and knowledge of CDM regulations, • Experience in MV & HV cable design, • Experience in Protection & Control We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

TEECOM | We Make Technology Work in Buildings Do you want to launch or advance a career at the intersection of technology and the built environment? Do you want to work with exceptional engineers to creatively solve complex problems? Do you want to work with clients to take their building experiences to the next level of connectivity, safety, and wow-factor? Do you want to join a company that defines the state of the art in its practice, with visionary leadership and in-house research and development? TEECOM is a $45+ million/year consulting engineering firm with an average annual growth rate of 20% over the past 25 years. We make technology work in buildings through strategic consulting, design and engineering, project management, and enterprise support. We work hard in a fast-paced professional environment that will challenge you to learn and grow, and we play hard through team lunches and events that give back to the community. Join us and make TEECOM even better. About the PositionIn the mid-level Designer engineering role, the Designer II will be proficient in their production skills in Revit and will have a basic understanding of one or more of the disciplines. This individual supports or manages the process of virtually constructing a building and documenting the design contract from the construction documents set through record drawing submittals. This is an opportunity to choose which discipline they would like to become an expert in. This individual is expected to receive delegated production and engineering and work effectively as part of a team. They will continue to be mentored in their focus discipline and given engineering tasks with direct oversight from their mentor, Sr. level engineer, or direct supervisor.The individual will receive thorough instruction through mentorship, hands-on Revit training, and opportunities to shadow senior level technical staff to learn from their experience. • Represent TEECOM Values and Guiding Principles: Individual demonstrates that they CARE about clients and fellow team members, adds VALUE, and earns and builds TRUST., • Lead by Example: Individual sets the example for the team by aligning their actions with their words., • Indirect Mentorship: Individual provides indirect mentorship to anyone who asks questions or needs guidance., • Augment Company-Wide Communication: Individual demonstrates a commitment to elevating company-wide communication by enhancing internal documentation, fostering team collaboration, and supporting transparency across the firm., • Knowledge of the AEC industry and the design and construction process are a plus., • Organization: Keep track of multiple projects and client and team member requests, often on a last-minute basis with excellent follow-up to assure promises are kept., • Documentation: Thoroughly documents, updates, and maintains process documentation, notes, and decisions across appropriate platforms to ensure workflows, processes, and discussions are accessible and up-to-date., • Communication: Conduct business communications in an effective, professional, and concise manner, both verbally and in written formats, and in one-on-one, small-group, and large-group settings. You must read, write, speak, compute, and problem-solve various tasks. Break down complex concepts into smaller and more digestible components that allow for a greater level of understanding by others., • Teamwork: Work as a functional member of a team and successfully work with other teams and business functions to achieve positive results. Facilitate effective project team and cross-functional interactions (Technical, Operations, BD, Marketing, etc.)., • Problem Solving: Approach problems using a methodical and logical method to create a workable solution. Use numbers and mathematical approaches for various tasks. Conduct research using the Internet., • Software: Use software applications effectively and efficiently (G Suite, MS Office, Bluebeam, Slack, Revit, AutoCAD MEP, Navisworks, Bluebeam Studio, etc.) to communicate and deliver work products., • Process Oriented: Follow processes, continually seek to make processes more efficient, enforce processes, and conduct root cause analyses that lead to the update or creation of processes., • Learn the building design process and the pursuit process, • Attend client meetings with senior technical staff members and prepare meeting notes documenting relevant decisions and discussions, • Prepare Revit models and/or AutoCAD drawings, • Assist with specification preparation and design calculations, • Research technical product information, • Assist other technical staff members with job site inspections to determine existing conditions and extent of progress made by contractors, • Perform delegated tasks from senior staff, • Attend and contribute to internal team, discipline, and project meetings, • Regularly document, update, and maintain team-related processes, workflows, and best practices. Actively initiate and participate in discussions about project challenges, process improvements, and other topics that enhance internal documentation and contribute to the team’s success and collaboration, • Perform other work-related duties as assigned, • Ensure timesheets/expense reports are accurate and up-to-date daily, • Achieve billed revenue target each quarter, • Quarterly reviews are completed on schedule, • Utilization equals 85%, • Average hours worked is between 40 and 50 hours per week, • Achieve goals from the Performance Plan each quarter, • Complete 100% of Asana tasks on time, • Actively engage with GitHub repositories, Callback One, Design Decision Logs, and other pertinent platforms by consistently contributing valuable documentation and participating in discussions to enhance internal documentation and team collaboration., • Education/Degree/Major: BS in Engineering (electrical preferred) or equivalent experience, • Construction industry or equivalent experience is a plus, • Autodesk (AutoCAD, Revit) is a plus, • Bluebeam Studio is a plus, • Microsoft Suite, • G Suite, • EIT is a plus, • CDT is a plus£40,000 - £70,000 a yearThis compensation will vary depending on your role-related skills, experience, knowledge, and subject matter expertise. TEECOM is committed to ensuring that we are the right fit for each applicant and that each applicant is the right fit for our team. As we get to know each other throughout the interview, the compensation may vary within the stated range. Your level will be evaluated and determined during the interview process. Please submit your resume and a cover letter.NOTICE TO THIRD PARTY AGENCIES: Please note that TEECOM does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, TEECOM will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, TEECOM explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of TEECOM.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Do you want to work to make Power for Good?We're the world's largest independent renewable energy company. We're guided by a simple yet powerful vision: to create a future where everyone has access to affordable, zero carbon energy.We know that achieving our ambitions would be impossible without our people. Because we're tackling some of the world's toughest problems, we need the very best people to help us. They're our most important asset so that's why we continually invest in them. RES is a family with a diverse workforce, and we are dedicated to the personal professional growth of our people, no matter what stage of their career they're at. We can promise you rewarding work which makes a real impact, the chance to learn from inspiring colleagues from across a growing, global network and opportunities to grow personally and professionally. Our competitive package offers a wide range of benefits and rewards. Job Purpose Reporting to an Operations Manager, the primary responsibility of the role is to lead and deliver O&M services to offshore renewable energy assets. Assets include offshore meteorological masts, wind turbines, offshore transmission assets including onshore and offshore substations, foundations and subsea cables. The Project Manager role is to ensure that these services are delivered safely, on time, within the budget and in accordance with contractual requirements, standards and specifications. Organisational ContextYou will be the focal point for project delivery and responsible for the planning and delivery of the day to day activities required to provide the agreed services. This is a client facing role and requires regular communication with RES’ clients, internal technicians and external contractors. You will work closely with the Offshore and UK&I O&M teams as well as other RES departments including HV Services, HSQE, Technical and Engineering. Key Accountabilities • Delivery of operation and maintenance services, including but not limited to:, • Planning the onshore and offshore scheduled work., • Preparing budgets and contract variations, tracking budgets and invoicing., • Ensuring all contracted and regulatory requirements are completed, such a statutory inspections as required by the contract., • Producing and reviewing Risk Assessments and Method Statements., • Procurement of 3rd party services, tools and equipment., • Project management (and occasional delivery) of work including:, • Inspection and planned maintenance of onshore and offshore assets., • Reactive maintenance of electrical and mechanical elements., • Inspecting and auditing on site activities., • Creation of reports to issue to client., • Competency and skills to:, • Project manage planned and reactive offshore activities., • Lead an onshore/offshore team in the execution of the work., • Plan maintenance services involving difficult access., • On-Call: you are expected to participate in a call out rota to provide emergency response outside of normal working hours. Depending on the type of faults, the on call duty may require onshore and/or offshore site visits at short notice., • The role also includes the following department responsibilities:, • Support the production and review of procedures, processes and technical literature., • Draft and/or provide inputs into proposals and related cost books., • Assist with the management & control of both client owned and Offshore department tools, equipment and PPE.Knowledge, • Good knowledge of UK Health & Safety legislation., • Experience with data logging and communication systems., • LV & mechanical fault-finding and analysis., • Knowledge of wind turbines and related equipment., • Knowledge of balance of plant applicable to offshore wind farms., • Knowledge of wind turbines and related equipment., • Knowledge of Offshore Transmission assets (OFTO), • Knowledge of HV systems., • Knowledge of HV safety rules., • Awareness of working at height and within a confined space.Skills, • Excellent attitude to safety., • Project Management., • Technical capability for the evaluation of complex equipment., • Ability to work alone and as part of a team, • Capable of working offshore and at height., • Physically fit, the role will require climbing/transferring to offshore structures., • Ability to use Microsoft Office (Outlook, Word and Excel)Experience, • Experience of working in multidiscipline teams., • Experience of the wind industry., • Experience offshore working., • Experience of transmission systems., • Experience working at height (desirable).Qualifications, • An HND in mechanical or electrical engineering, or equivalent qualification, but background in technical discipline., • GWO Training (desirable, however full training will be given), • IRATA or rigging qualification (desirable), • Hold a full driving licence. At RES we celebrate difference as we know it makes our company a great place to work. Encouraging applicants with different backgrounds, ideas and points of view, we create teams who work together to solve complex problems and design practical solutions for our clients. Our multiple perspectives come from many sources including the diverse ethnicity, culture, gender, nationality, age, sex, sexual orientation, gender identity and expression, disability, marital status, parental status, education, social background and life experience of our people.

Design Engineer - Homebased Why Clymac? Are you passionate about safety and security? Since 1992, Clymac has been a leader in delivering fully integrated Fire & Security Systems across the UK. We’re looking for dedicated professionals to join our team and help us continue our mission of providing top-notch protection and peace of mind to our clients. At Clymac, you’ll have the opportunity to work with cutting-edge technology and be part of a team that values innovation, excellence, and customer satisfaction. If you’re ready to make a difference and grow your career with a trusted industry specialist, we want to hear from you! Clymac’s Design Engineers We are seeking an experienced and enthusiastic Design/Estimating Engineer to join our fast-paced design and estimating team. In this role, you will be responsible for producing accurate and compliant fire alarm system designs and cost estimates, supporting both pre-sales activities and project delivery. This position requires a strong technical understanding, attention to detail, and the ability to work collaboratively with internal teams and clients to deliver tailored, cost-effective solutions. • Lead the design and development of fire alarm system proposals, ensuring compliance with all relevant standards and regulations, including BS 5839, CDM regulations, and other applicable codes., • Proven ability to manage relationships and communicate effectively with Mechanical & Electrical (M&E) contractors, ensuring projects are delivered to the required standards and timelines., • Manage multiple design projects simultaneously, effectively prioritising workloads based on project deadlines and business needs., • Act as a customer-facing technical expert, working alongside Business Development Managers to present and deliver tailored design proposals., • Collaborate closely with Project Managers and installation teams to assess and negotiate installation costs for supply, installation, and commissioning projects., • Ensure all designs and proposals are accurately costed, aligned with company margin expectations, and appropriately approved and signed off prior to release., • Guarantee all quotations and designs are fully compliant with current legislation and industry standards, maintaining technical accuracy and integrity., • Deliver exceptional customer service by managing design enquiries efficiently—gathering and assessing necessary information, and responding promptly to client needs., • Provide ongoing technical support, guidance, and mentorship to team members, while coordinating with other internal departments to ensure cohesive project delivery., • Oversee the administration of current enquiries, including the preparation of project handover documentation and maintenance of the SRM system. Who We’re Looking For In addition to having all the usual attributes of a great Clymac employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team_, for this specific opportunity, we are looking for candidates who also offer, • Proven experience as a Fire Alarm Design Engineer, ideally supported by an FIA Design Qualification or equivalent industry certification., • Previous experience in a similar role, with a track record of liaising effectively with end users, contractors, and other stakeholders throughout the project lifecycle., • Proficient in AutoCAD, with the ability to produce accurate, standards-compliant system designs., • Excellent communication and interpersonal skills, with a strong focus on delivering outstanding customer service., • Full, clean UK driving licence, enabling site visits and client meetings as required., • Professional, relationship-driven approach, with the ability to build and maintain strong working relationships both internally and externally. Our Commitment to Attracting, Rewarding & Retaining Talent We’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Salary – £45,000 per annum, DOE, • Pension Plan – Helping you invest in a secure financial future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Generous Holiday Allowance – 25 days paid leave plus all bank holidays, giving you time to recharge, • Referral Bonus Scheme – Earn up to £1,000 for every successful candidate you refer – with no limits, • Mental Health & Wellbeing Support – Access to confidential resources and support when you need it most, • Employee Recognition Programme – Celebrating your hard work and achievements throughout the year, • Career Development – Ongoing training, clear progression paths, and opportunities to grow within the business A Little More About Clymac At our core, we are a small, regionally focused business that prides itself on delivering a bespoke and reactive service. Our clients receive undivided attention and dedication, ensuring their needs are met with precision and care. Yet, we have the luxury of being part of a larger group of businesses within the Fire Protection, Security, and Building Management Systems industry. This connection allows us to share best practices, access learning and development academies, and benefit from Human Resource specialists and industry knowledge. This synergy ensures we are constantly improving and staying ahead in the critical service industry. Our Commitment: We are large enough to provide comprehensive, industry-leading solutions, yet small enough to deliver a personal and caring service to each client. Our Businesses Include: • Alarm Communications acl.uk.com/careers, • Clymac clymac.co.uk/careers, • FAFS Fire & Security fafsfireandsecurity.com/careers, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com/vacancies/, • Morgan Fire Protection morganfire.co.uk/recruitment/, • Marlowe Smoke Control marlowe-aov.co.uk/careers/, • Marlowe Fire & Security marlowefireandsecurity.com/vacancies/ Equal Opportunities At Clymac, we cultivate a vibrant, diverse, and inclusive environment where everyone can truly be themselves. We celebrate individuality and believe that a culture of inclusion helps us better serve our customers and innovate as a team. Our commitment to equal opportunities means we're here to support you—if you need any adjustments to fully participate in the recruitment process, just let us know. Together, we can create a workplace where everyone thrives Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Our service division is a customer-facing function in a very demanding industry; the successful candidate will be dealing with some of the leading restaurants as well as a variety of casual dining chains, hotels, educational establishments, hospitals, government buildings, and offices. Winterhalter’s growth agenda in reliant on the continuous improvement of our service offering to strengthen customer engagement and win new business. We are therefore looking for a new Regional Operations Manager to cover an area focused around South London and the South East. The right person for the job: You will be able to manage time and work under pressure to tight deadlines while balancing the demands of numerous tasks. You will have the ability to adapt quickly in a rapidly changing environment and be keen to embrace new experiences, responsibility, and accountability. You will be reliable, tolerant and determined and will enthusiastically adapt to changing work processes and schedules as required. If you are a self-driven individual with a positive outlook, clear focus and ability to see things from another person's point of view - then you are well set to succeed in this role. The Regional Operations Manager will support, coach, mentor and performance manage a regional team of installation & Service Technicians with varying levels of skills and experience. A key player in the service operation, working with 4 other Regional Operations Managers supporting a variety of customers across all market sectors with a revenue value of approximately £12M. This role is the key driver in achieving the objectives of the operations manager/service managing director by: • Take ownership and responsibility for the delivery of the agreed goals and targets., • Providing constructive and positive feedback to team members., • Encouraging individuals, providing input and suggestions for problem resolution. Addressing interpersonal problems with team members quickly and directly and consistently dealing with performance issues in a firm, fair, respectful and timely manner., • Carrying out an assessment of the field service technicians this will include their technical ability to carry out their role, customer engagement and commercial competencies in the working environment., • Establish and maintain an effective debriefing process on a frequent basis to ensure goals and targets are being met., • Delivering constructive feedback via 1:1 meetings and group briefings. Responsible for ensuring team members receive the appropriate training, coaching, personal development, and performance management to perform their role to the highest standard. • Contribute to grading evaluations and development planning as required, • Contributing to the planning and execution of agreed goals and measurable targets Knowledge & Experience: • Proven 3-4 years field service experience as a service technician, • You must have proven experience in leading a team of field service technicians ideally 3-4 years experience, • As a manager of field service technicians you must be able to provide constructive feedback, manage their activity in the field and performance, • You will be managing and coaching a team of field service technicians so it is essential that you have worked with single and 3 phase equipment; an electrical qualification is essential., • Ability to troubleshoot, test, repair and service technical equipment, • Management qualifications are desirable but not essential, • Excellent written and verbal communication, • Strong analytical and problem-solving skills, • Excellent organisation and computer skills, • Ability to learn new applications and cross-train others is highly desirable, • Familiarity with mobile tools and applications, • Direct experience in the warewash and or catering industry is highly desirable Team Dynamics: The Regional operations manager will take ownership and responsibility for building a strongly motivated team of field service technicians with clear goals, targets and personal objectives. You will create a working environment which encourages a passion for service quality and continuous improvement in customer service. An important aspect of the role is the management of performance, recognising commitment and supporting continuous improvement. Recognised challenges in this role include; managing a team of independent individuals who work remotely and in relative isolation across a wide geography and drawing on skill and experience to adapt management style for a team with varying levels of skill and experience. • An essential part of this job is giving consideration to the resource requirements of the region – factoring in the skill base and experience of the field service technicians, as well as the customer needs in the territory., • Evaluate the geography and the associated traveling times affecting service delivery and individual effectiveness., • Ensuring the technicians have the correct and necessary information, resources, tools, training and coaching to complete all jobs allocated to the required standard. Hours of work & Benefits: • Core hours: 40 hours per week, Monday to Friday, • Competitive salary, • Company vehicle (with use privately) including fuel card, • 25 days annual leave - plus bank holidays (increasing with length of service), • Pension & Life Assurance, • Private Medical Cover, • Employee assistance plan and discount scheme Winterhalter is an equal opportunities employer

We are looking for an electrically biassed Maintenance Engineer for one of our long-standing clients based near Wigan. My client is a global manufacturer and have been operating in the area for over 100 years. An exciting opportunity for a Maintenance Engineer to join this great company on their 4-shift rota. You will play a key part in ensuring the smooth operation on all production equipment, contributing to the efficiency and reliability of the manufacturing process. Maintenance Engineer Benefits: £40,000 - £56,900 (DOE) OT at premium rates. Training and Progression. 33 Days holiday including BH. Secure car park. Pension. Training and Progression Opportunities. Maintenance Engineer Duties include: Monday – Friday. (8am – 4pm / 6am – 2pm / 10pm – 6am / 2pm – 10pm) – 4-week rotation. Carry out routine and preventative maintenance on electrical and electromechanical equipment. Diagnose and repair electrical faults to minimize downtime. Support continuous improvement initiatives and implement solutions to enhance equipment reliability. Work safely and in compliance with industry standards and health and safety regulations. Collaborate with multi-disciplinary teams to optimize plant performance. Maintenance Engineer Requirements include: Recognised Engineering Qualifications. * Electrically ...

HGV Technician – Nights & Day Shifts Available! Our client, a reputable organisation in Wigan, is seeking a skilled and experienced HGV Technician to join their busy workshop. This vacancy for an HGV Technician offers an excellent opportunity for career progression within a forward-thinking company. The role requires dedication to quality workmanship and a commitment to safety standards. Our client values their technical team and provides ongoing training, supportive environment, and competitive compensation. Benefits for the successful HGV Technician: Competitive salary with an OTE of up to £50,000 per annum Flexible shift patterns including day and night shifts 38.5 to 40 hours per week, promoting work-life balance Pension scheme with employer contributions Career development opportunities within a well-established company Supportive, friendly team environment On-site parking for convenience Employee discounts on various products and services Additional benefits including health and wellbeing services, free eye tests for VDU users, and cycle-to-work schemeDuties: Conduct servicing and repairs on HGV vehicles to industry standards Diagnose and repair mechanical and electrical faults accurately Work efficiently both independently and as part of a team Ensure compliance with health and safety regulations Maintain accurate documentation of repairs and service history Assist with routine vehicle maintenance to red...

Job Title - Workshop Engineer Location - Bolton, Greater Manchester Salary: £30,000 - £42,500 (Dependant on Hours) Shift: Monday to Friday - Days Shift. (40 hour or 45 hour week option) Job Role: We are currently recruiting for a Workshop Engineer to join a well-established and growing business specialising in Forklift Trucks (FLTs), Mobile Plant and Material Handling Equipment . This is a workshop-based role, carrying out servicing, maintenance and repairs on a wide range of mechanical, electrical and hydraulic equipment. Sector - Workshop Engineering Non-Negotiable Requirements of Workshop Engineer: Hands-on engineering experience in a workshop or industrial engineering environment. Requirements of Workshop Engineer: Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles. Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics. Recognised Engineering Qualification. Desirable Requirements of Workshop Engineer. Engineering qualification of minimum Level 3. The Workshop Engineer will benefit from: Training and Development People focussed business - look after staff well. Regular overtime opportunities Company Benefits package If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Matthew Lye at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. TPBN1_UKTJ

We are seeking an Electrical Maintenance Engineer to join the Engineering & Manufacturing department within the industrial/manufacturing industry. This position, based in Wigan, requires a professional who can ensure the smooth operation and maintenance of electrical systems.Client DetailsBased in Wigan, this leading manufacturing and recycling facility plays a key role in supporting the region's circular economy. Specialising in high‑performance paper‑based packaging materials, the site combines advanced production technology with a strong commitment to sustainability. Known for investing heavily in innovation, efficiency, and environmental stewardship, the operation supplies essential materials to major brands across the UK. The team prides itself on a culture of safety, quality, and continuous improvement, contributing to both local employment and the broader shift toward greener packaging solutions.DescriptionAs the electrical maintenance engineer you will be tasked with the following; Key Responsibilities -Breakdown Response & RepairsAct as first-response support for Electrical breakdowns across all production lines.Diagnose faults quickly and carry out repairs to minimize downtime and production disruption.Escalate complex breakdowns appropriately while ensuring initial containment actions are taken.Maintenance & Machine ReliabilitySupport planned preventive maintenance (PPM) activities as required.Monitor machine condition and report recurring issues or potential failure risks.Assist in setting up machines following maintenance to ensure safe and efficient restart.Mechanical DutiesWork on machinery including corrugators, printers, slotters, die cutters, folder gluers, conveyors and associated handling systems.Undertake Electrical repairs, adjustments, alignment, Calibrations, installations.Ensure all work is carried out in line with site safety procedures and engineering standards.Operational SupportWork collaboratively with production teams to ensure smooth handover between shifts.Log breakdowns, actions taken and parts used in the CMMS or shift log.Contribute to continuous improvement by highlighting root causes and recommending long-term fixes.Health, Safety & ComplianceEnsure all tasks are carried out in compliance with site health and safety policies, permit-to-work procedures and isolation standards.Identify and report any unsafe conditions or equipment issues.Maintain high standards of housekeeping within engineering and production areas.ProfileA successful Electrical Maintenance Engineer should have:Electrical maintenance experience in a manufacturing or FMCG Environment. Strong fault-finding and breakdown repair skills.Ability to work independently across rotating shifts.Good understanding of machine safety, isolations, and maintenance best practice.Experience within corrugated board, packaging, print or conversion machinery.Basic understanding of electrical safety (e.G., isolation awareness).CMMS / maintenance logging experience.FLT / MEWP / Permit-to-Work awareness (training can be provided).NVQ level 3 or equivalent.Job OfferCompetitive salary ranging from £48,296 per annum.25 days of holiday leave plus bank holidays.4.5% matched pension contribution.Access to an Employee Assistance Programme.Free on-site parking for convenience.All necessary tools provided.This permanent opportunity in Wigan offers a rewarding career within the industrial/manufacturing industry. Apply now to take the next step in your career as an Electrical Maintenance Engineer

You'll be working Monday to Friday on standard day shifts, with the opportunity to earn additional income through premium-rate overtime. The position becomes permanent after a successful probation period, within a well-established, market-leading organisation experiencing continued growth, and includes 28 days' holiday.The Electrical Fitter role is based in the Leigh area and is easily accessible from surrounding main roads and motorways, including the M6 and A580. The site is commutable from areas such as St Helens, Wigan, Bolton, Liverpool, and Warrington. Duties of the Electrical Fitter position:Running wiring looms Using hand and power toolsWorking with electrical drawingsTerminating cablesConnecting cables to electrical systems, including lights, beacons, reversing cameras, and other equipmentSplicing, fitting trunking, and soldering The Electrical Fitter role involves assisting with the manufacture of specialist vehicles. The position would suit candidates with experience in electrics in any capacity; previous experience working with vehicles is not essential, as full training will be provided.We're keen to hear from individuals who may have experience as a Panel Wirer, Electrical Fitter ,Installation Engineer, Auto Electrician, CCTV or Alarm Engineer, Telematics Engineer, and/or hold relevant NVQ qualifications or time-served experienceWhat's in return for the Electrical Fitter position:Hourly rate of £13-14 an hour dependant on experience with OT paid at x1.5Clean modern working conditionsPermanent position after successful probationEarly finish on a FridayFurther training provided to upskill further28 days holidayFree on site parkingIf you are interested in the Electrical Fitter role please contact Maisie at E3 Recruitment

Senior Engineer / Reliability Engineer INTERNAL JOB TITLE: Asset Technician Reporting To: Maintenance Manager Shift Pattern: Various Patterns Available Role Summary: To proactively work as part of a multi-disciplined shift team to maintain all assets within the Operational areas to optimise the utilisation of the equipment and to deliver maximum volume at the right quality. Working closely with the Management team to provide pro-active maintenance and technical support to the operations and engineering team to optimise production output for your process area. Actively identify RCA (Root Cause Analysis) and bring the equipment back into service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Support coordination of the engineering team to provide proactive mindset and behaviors to minimize downtime on your process area. Ensure alignment with Engineering Lead and process area teams, supporting the training and development of equipment /process/area/ system, owners. Key Responsibilities: Demonstrate commitment to health and safety. Effective 2-way communication of health and safety, e.G., at Tier 1, Safety Habit discussions, Safety Habit Observations, Risk Triggers including dynamic risk assessments Knowledge of site hazards and controls, and compliance to permit process ensuring team are competent for activities and compliant to site Ways of Working Responsible for food safety and product quality as defined by regulatory, Kraft Heinz and local procedures. It is the jobholder’s responsibility to escalate any issues that might compromise food safety and product quality Leadership during emergency situations To deputise within control loops for the Engineering Leader, when required Carry out planned and preventative maintenance using either Electrical / Mechanical / Control System / Automation skill set To diagnose faults and to test, repair and maintain Mechanical / Electrical equipment Support site Reliability agenda: Identification of failure modes and trends, complete root cause analysis (RCA) processes and drive / deliver the agreed actions, define, and improve maintenance strategy for assets Ensure required spares are defined for each asset with correct specifications and adequate quantities. Ensure asset BOMs are correctly setup in SAP Identify life cycle issues and raise these with possible recommendations Proactive fault prevention and continuous improvement activity to deliver key maintenance KPI’s Provide support to and involvement in site Project and Change Initiatives as appropriate Generate shift report Report all maintenance tasks on SAP system as required and to the correct standard Support the planning, critical information collection, organising and execution of works Practice KHMS requirements and implement according to the standard Support the shift engineering team Ensuring close liaison with support departments to maximise quality and performance including Planning and execution of all maintenance tasks throughout the week Liaise and manage OEMs / Suppliers and Contractors as required Ability to deliver on the job training (knowledge transfer) to new / existing colleagues and apprentices Actively participate in tier meetings and execution of the daily / weekly plan Accountable for assessing all corrective notifications in a timely manner for area of responsibility, ensuring the JIB (job in a box) process is followed and all parts are correct Support the scheduling of maintenance work for the next week during the Weekly Planning Meeting Support the overhaul / EEM process for area of responsibility Lead and support the RCA of Breakdowns and the implementation of corrective actions to prevent re-occurrence when escalated Create SOP’s/SMP’s/OPL’s and train and sign off line team in maintenance activities Deliver innovation and continuous improvement to reduce downtime caused by maintenance and equipment failures Ensure maintenance schedules are updated with learnings from equipment failures to minimize unplanned plant downtime Ensure that SAP is being used effectively to develop a planned maintenance strategy. Support the development of the system within the engineering function Support the weekend maintenance and aligned engineers to ensure available hours of the engineers is utilised to its full extent Ensure effective handover is completed to key stake holders following completion of any maintenance works (QRMP) and Completion of the Weekend Maintenance plan Attend and participate in handover meetings to ensure effective handover of information Raise or approve required permits on shift for specific job tasks Provide technical support following escalation from craft on shift Expected Responsibilities and Required Skills: Flexible, resilient and committed with a right first time attitude Good oral and written communication skills Be able to communicate effectively at all levels and ensure communications are clear and understood Be able to engage and motivate teams when adapting and adopting change programs. Training and coaching capabilities Strong organizational and technical skills Ability to work with data and information Recognised Engineering qualification is essential, HNC/HND/degree desirable Develop skills and knowledge for personal development and overall continuous improvement A Methodical approach to fault finding to diagnose and repair faults on automation / electrical or mechanical, pneumatic and hydraulic systems in a timely manner Some knowledge TPM/Lean Manufacturing tools and techniques Competent on MS office software Siemens S5/S7 experience desirable but not essential (For Electrical bias)

Electrical Fitter Defence Manufacturing | Bolton | Long term Contract £21.63£22.63 PAYE / £29.02£30.38 Umbrella | 37 hrs | MonFri | Onsite Are you an apprenticeship trained Electrical Fitter looking for stable, long term work, clean workshop conditions, and consistent day shift hours? This is an opportunity to join a well established defence manufacturing programme at a modern Bolton facility, working on high quality, mission critical products with clear processes, strong quality standards, and long term demand. The Role As an Electrical Fitter, youll be part of an experienced electrical manufacturing team, responsible for assembly, wiring, and certification of electrical products built to approved drawings and industry standards. Youll work in a structured, regulated environment where quality, safety, and right first time builds are key. What Youll Be Doing Electrical assembly, wiring, soldering, and termination to drawings and build instructions Certifying your own work in line with product certification and quality procedures Using hand tools, jigs, fixtures, and electrical measuring equipment Carrying out self checks and inspections to ensure defect free builds Completing manufacturing and certification documentation accurately Working closely with inspection, test, and engineering teams Maintaining high standards of safety, ESD compliance, and housekeeping Supporting continuous improvement across the manufacturing line What Were Looking For Essential Completed electrical or manufacturing apprenticeship (Level 3 or equivalent) Hands on experience in electrical wiring, fitting, assembly, or loom build Comfortable working to engineering drawings, specifications, and quality standards Desirable (not essential) IPC 610 and/or IPC 620 exposure Defence, aerospace, or other regulated manufacturing experience ESD, manual handling, or lifting & slinging training Dont worry if you dont tick every box relevant electrical manufacturing experience is what matters most. Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) Security Clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. About the Site For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. Youll benefit from: Clean, modern working environment Onsite canteen, showers, and bike storage Easy motorway access and nearby amenities What Happens Next? If your application meets the initial criteria, a member of our talent team will contact you to arrange a structured screening call to discuss your experience, the role, and next steps in more detail. TPBN1_UKTJ

Join a market-leading food manufacturer at a modern, highly automated production facility in Skelmersdale. Due to continued growth and investment, we’re looking for electrically biased Multi-Skilled Maintenance Engineers to strengthen an established and well-structured engineering team. You’ll be working within a large, state-of-the-art site that benefits from significant ongoing investment in both equipment and people. With strong maintenance processes, healthy engineering budgets, and a supportive team culture, this is an environment where engineers are genuinely valued and developed. The business is committed to continuous improvement, training, and long-term career progression, making this an excellent opportunity for engineers who enjoy working in a fast-paced, forward-thinking manufacturing environment with modern technology and high engineering standards. Benefits: Salary of £60k Quarterly Bonus (£1,400 - £3,200 annually) Plus paid Overtime Subsidised canteen Staff discounts 23 Shifts leave + your birthday off ! Critical Illness Cover, Salary Sacrifice Scheme for Electric Cars , Discounted gym membership plus more …. Shift Pattern: Panama Shifts – Days and Nights (12 hours) (3s & 2s) (2 weeks Days then 2 weeks Nights) Key Responsibilities of Maintenance Engineer: Deliver hands-on engineering support to keep production running smoothly Perform both reactive and planned maintenance Use CMMS system to record and track maintenance activities Work closely with production to meet performance goals Follow safety and repair best practices at all times Contribute to continuous improvement and cost-saving initiatives Be part of a collaborative, supportive engineering team with a strong culture of teamwork What We’re Looking For: Time-served or apprenticeship-trained engineer Relevant engineering qualifications (NVQ Level 3 and BTEC, ONC/HNC preferred) Strong electrical skillset Previous experience in a manufacturing or production environment A positive, proactive mindset and a team player Eagerness to grow, learn, and contribute to a forward-thinking engineering department To Apply: If you're an experienced Multi-Skilled Maintenance Engineer looking for a role with long-term career potential in a stable, forward-thinking company — we’d love to hear from you! Wagstaff Recruitment – Building Trusted Relationships to Create Great Opportunities

Are you an experienced Electrical Engineer on Multi-skilled engineer with strong electrical skills? Would you like to work for a truly global brand and a real employer of choice? If so, this Engineer role could be just for you. Along with amazing career prospects and the kudos of working for one of the most well known brands in the world, the role offers a fantastic package and amazing career prospects. There is a salary of £58,944 and benefits including quarterly bonus, pension scheme, childcare vouchers and holidays that increase to 23 days holiday (with the scope to buy or sell 3) plus your birthday as an extra day off, paid overtime, extended parental leave, company pension, staff discounts and plenty more! What will you be doing as an Electrical Engineer: Working as part of a team, you will be ensuring smooth and continued running of a large production site. You will ensure the smooth running and maintenance of all manufacturing assets, whilst delivering optimum plant reliability through preventative maintenance, corrective maintenance, root cause analysis and continuous improvement. The role will focus on PPM to reduce the need to take a fire fighting approach to maintenance and repairs. Duties will include: Deliver hands-on engineering support to keep production running smoothly Perform both reactive and planned maintenance on plant and equipment Keep maintenance records up to date using our CMMS system Work closely with production to meet daily performance goals Follow safety and repair best practices at all times Contribute to continuous improvement and cost-saving initiatives The role will involve working a continental shift pattern, 3 on, 2 off with a 42.9 hour week on average with 12.25-hour shifts: This will rotate between days (05:45-18:00) and nights (17:45-6:00) and includes nights, weekends and bank holidays We would LOVE to hear from you if you have the following skills and experience: Experience in a similar Engineering role with a strong electrical bias with a large company background, ideally in manufacturing NVQ Level 3 or equivalent engineering apprenticeship with hands-on experience is essential Recognised electrical academic qualification Electrical Testing & Inspecting - City & Guilds 2391 holder would be an advantage 18th Edition Wiring Regulations (BS 7671) qualification is desirable Strong electro-mechanical knowledge Working knowledge of PLC systems - Allen Bradley and/or Siemens an advantage Familiarity with CMMS and SCADA systems Comfortable with LOTO processes Solid understanding of equipment and technical standards A sense of ownership for safety, quality, and performance Problem-solving skills Good communication skills Due to the location of the site, you will need your own transport What will you get in return for your work as an Electrical Engineer: A salary of £58,944 including shift allowance Quarterly bonus with the ability to earn up to another £3,200 pa Scope for paid overtime 23 days holiday (with the ability to buy or sell 3 days extra) Your birthday as an extra day off! Free parking Subsidised canteen Company pension scheme with increased company contributions Extended parental leave Staff discount Medical support including Virtual GP and Physiotherapy Cycle to work scheme Electric car scheme PPE including uniform and safety boots provided, cleaned and maintained for you Long service awards Great career prospects with excellent training provided If this sounds like an Electrical Engineer role you would LOVE, please send your CV today! Apply now by sending your CV. We aim to respond to all successful applications within 2 days. If you haven't been contacted within 2 days your application has been unsuccessful. Please check our website and apply directly for any other suitable positions you see. We apologise that we are unable to contact everyone in person and thank you for your interest. Jobwise Ltd is an employment agency and the details sent in your application may be stored on our secure database

Junior Commissioning Engineer x2 UK Based | UK & International Travel £30,000 - £40,000 + Overtime + Benefits An award-winning engineering business is looking to recruit ambitious electrical engineers who want to build a career in service, installation and commissioning. Rather than looking for experienced commissioning engineers, the company is seeking people it can train from the ground up. You'll work on highly specialised equipment for the pharmaceutical industry, receiving structured training from experienced engineers while travelling throughout the UK and internationally. The Role Support equipment build and Factory Acceptance Tests (FAT) Assist with installation and commissioning at customer sites Learn to carry out Site Acceptance Tests (SAT), IQ and OQ validation Fault finding, testing and technical documentation UK and occasional international travel About You Advanced Apprenticeship (or equivalent) in Electrical Engineering Ideally 1-5 years' industry experience Keen to develop a career in service, installation or commissioning Willing to travel Full UK driving licence This is an excellent opportunity to join a business renowned for developing engineers through its nationally recognised apprenticeship and training programmes, with genuine long-term career progression

Early finish on a Friday, the role is Monday to Friday, sociable working hours, annual salary of circa £28-32k DOE. This is a fantastic opportunity to work in a clean, modern workshop environment for a company that is excelling in its industry and has a strong order book. We are looking for a Vehicle Builder to join a growing manufacturing business. The company has a family feel to the business and supports growth and development within the workshop. The location of the Vehicle Builder: Wigan area commutable from Bolton, Warrington, Leigh and St Helens. A growing business that specialises in vehicle conversions, installations, and fleet is looking to recruit a Vehicle Builder to join the workshop team. This is a fantastic opportunity for someone with proven mechanical assembly/fitting experience who is looking for a new step in their career and growing into a company that offers support and growth opportunities. Duties of the Vehicle Builder role: Installing and routing wiring looms; terminating, soldering, and connecting electrical systems. Fitting subframes, bodies, hydraulic and electrical components to commercial chassis, including required modifications. Reading engineering drawings and using hand/power tools to complete high-quality installations. Conducting quality checks while working safely and collaboratively in a busy workshop. Benefits of the Vehicle Builder role: Hourly rate of circa £14 per hour Overtime opportunities paid at enhanced rates. 20 days holiday + 8 bank holidays (with 3 days reserved for Christmas shutdown). Early finish on Fridays. Modern , clean working environment Ongoing training and development within a supportive team environment If you are interested in the Vehicle Builder role , please contact Maisie at E3 Recruitment

Plant Fitter (Hybrid Role) Lancashire £38,000 basic Company van plus fuel card, 42.5 hour week, plenty of overtime availability, overtime rate 1.5x, 23 days holiday, holiday scheme Overview We are seeking a skilled and dedicated Plant Fitter to join our team in the North-West. This is a hybrid role that offers the opportunity to work on a wide range of heavy plant machinery, including excavators, dumpers, telehandlers, loading shovels, dozers, and more. If you are passionate about machinery maintenance and repair, and are looking for a rewarding career with excellent benefits, we encourage you to apply. Responsibilities Conduct routine maintenance, servicing, and repairs on a variety of heavy plant machinery. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults. Ensure all machinery is maintained to the highest standards to minimize downtime. Maintain accurate records of all work carried out, including service reports and parts used. Adhere to health and safety regulations and company policies at all times. Provide excellent customer service when liaising with clients and colleagues. Travel to various sites as required, utilizing the company-provided van and fuel card. Qualifications Proven experience as a Plant Fitter or in a similar role working with heavy plant machinery. Strong knowledge of mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering (NVQ Level 2/3 or equivalent preferred). Ability to work independently and as part of a team. Excellent problem-solving skills and attention to detail. Full UK driving license. Day-to-Day Perform scheduled maintenance and emergency repairs on-site or at the workshop. Inspect machinery to identify potential issues and recommend preventative measures. Collaborate with the team to ensure efficient workflow and minimal equipment downtime. Utilize diagnostic tools and equipment to identify and resolve faults. Travel to client sites across the North-West region as required. Benefits Competitive salary of £35,000-£38,000 per annum. 23 days holiday which rises up to 25 with time served Company-provided van with fuel card for work-related travel. Overtime opportunities paid at 1.5x the standard rate. 42.5-hour workweek with potential for flexible working arrangements. Opportunity to work on a diverse range of heavy plant machinery. Professional development and training opportunities to enhance your skills. Supportive and collaborative work environment. If you are a motivated and experienced Plant Fitter looking for a challenging and rewarding role, we would love to hear from you. Apply today to join our team and take the next step in your career! SER-IN

MB982: Job Title: Senior Electrically Biased Maintenance Engineer Location: Leigh Salary: £49,500 + Overtime Working Hours: 6am to 2pm, 2pm to 10pm (Mon to Friday) - 40 hours per week Additional Company Benefits: Enhanced pension (Matched up to 4% increasing to 10%), Medical Expenses, PPE, 25 days holiday + BH Overview: First Military Recruitment is proudly working in partnership with a fantastic manufacturing business who are looking to recruit a Multi Skilled (Electrically biased) Maintenance Engineer on a permanent basis due to growth based at their Leigh depot. Duties and Responsibilities: Recruitment and induction and ongoing leadership of the site maintenance team, ensuring all necessary training and development needs are identified and delivered whilst ensuring equipment, and operational processes in relation to applicable regulations are in place and applied. Monitor and develop, performance of the engineering Team, report on KPIs and drive continuous improvement. Take responsibility for the call out rota and holiday planning for the Engineering Team Attending breakdowns as necessary and assisting the engineering team on the shop floor. Responsible for the site engineering budget, ensuring spend is within budget, all variances to be discussed or report to National Maintenance Manager Manage ordering of parts and services related to the Engineering Function To take ownership of the Maintenance plan and adapt and change as becomes necessary. Completing outstanding works on the sites maintenance system Ensure computerised maintenance package is fully utilised for a suitable PPM schedule and OEM recommendations Ensure significant breakdowns are investigated to root cause and that effective action to prevent recurrence is implemented Support site projects and in conjunction with the designated Project Manager, ensure all technical aspects are catered for. Delivering best practice and continuous improvement by identifying opportunities and implementing appropriate solutions. To ensure that all statutory compliance inspections and associated documents are completed in full and filed in the correct manner, any remedial actions are acted upon and completed in a timely manner. Ensure the management of all Health, Safety, Environmental & Risk factors, in order to deliver full compliance with Company Policies & Procedures, as well as compliance to all appropriate legislation Skills and Qualifications: Strong Leadership, management, and development of the maintenance team Knowledge of health & safety and environmental Legislation Excellent control and adherence to monthly financial budget Effective project management and coordination Self-motivated and able to work with little or no supervision daily A good degree of computer literacy (Microsoft Office) Able to work under pressure and deliver agreed deadlines Strong Electrical Knowledge A good knowledge of Electrical Safety Compliance Experience with industrial steam generating boilers Experience with PLC, Electrical and Control System fault finding Experience in the Food Sector / Pharmaceutical / FMCG MB982: Job Title: Senior Electrically Biased Maintenance Engineer Location: Leigh Salary: £49,500 + Overtime Working Hours: 6am to 2pm, 2pm to 10pm (Mon to Friday) - 40 hours per week Additional Company Benefits: Enhanced pension (Matched up to 4% increasing to 10%), Medical Expenses, PPE, 25 days holiday + BH

Job Title - Workshop Team Leader Location - Bolton, Greater Manchester Salary: £40,000 - £43,000 Shift: Monday to Friday Days (40 Hours) Job Role: We're on the lookout for a hands-on Workshop Team Leader to take the reins of our fast-paced materials handling workshop. You'll lead a close-knit team of engineers, keeping day-to-day operations running like clockwork while driving high standards across maintenance, servicing and repairs of a wide range of Material Handling Equipment (MHE). This is a key leadership role where you'll balance people management with technical expertise - motivating your team, prioritising workloads, and making sure every job is done safely, efficiently and to the highest quality standards. If you thrive in a busy workshop environment and love leading from the front, this is your chance to make a real impact. Sector - Workshop Engineering Non-Negotiable Requirements of Workshop Team Leader: Hands on Engineering/Maintenance Experience Requirements of Workshop Team Leader: Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles. Leadership or management experience Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics. Recognised Engineering Qualification. Desirable Requirements of Workshop Team Leader: Previously held a role as a Workshop Engineer. The Workshop Team Leader will benefit from: Full Training and Induction Scheme Company Pension Scheme Tools provided Machinery Specific training programmes. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Stash Rowszar at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Job Title - Workshop Engineer Location - Bolton, Greater Manchester Salary: £30,000 - £42,500 (Dependant on Hours) Shift: Monday to Friday - Days Shift. (40 hour or 45 hour week option) Job Role: We are currently recruiting for a Workshop Engineer to join a well-established and growing business specialising in Forklift Trucks (FLTs), Mobile Plant and Material Handling Equipment. This is a workshop-based role, carrying out servicing, maintenance and repairs on a wide range of mechanical, electrical and hydraulic equipment. Sector - Workshop Engineering Non-Negotiable Requirements of Workshop Engineer: Hands-on engineering experience in a workshop or industrial engineering environment. Requirements of Workshop Engineer: Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles. Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics. Recognised Engineering Qualification. Desirable Requirements of Workshop Engineer. Engineering qualification of minimum Level 3. The Workshop Engineer will benefit from: Training and Development People focussed business - look after staff well. Regular overtime opportunities Company Benefits package If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Matthew Lye at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

ELECTRICAL MAINTENANCE ENGINEER Job Title – Electrical Maintenance Engineer Location – Wigan Salary – £46,855 – £49,855 Shift – 3 Shift Pattern (6am–2pm / 2pm–10pm / 10pm–6am) Job Role of the Electrical Maintenance Engineer A fantastic opportunity has arisen for a hands-on Electrical Maintenance Engineer to join a highly automated, fast-paced manufacturing site. This is an excellent opportunity to work within a large-scale production environment featuring one of the most advanced corrugation operations in Europe. The successful engineer will be working within a high-speed production area, responsible for maintaining and improving machinery that produces up to 26,000 units per hour. This is a dynamic role offering a mix of planned and reactive maintenance, fault finding, and involvement in continuous improvement and project work. You will be responsible for ensuring maximum uptime and efficiency across a range of automated machinery in a lean manufacturing environment. Sector – Industrial Manufacturing Key Responsibilities Electrical fault finding on high-speed production machinery Planned preventative and reactive maintenance Working with systems including sensors, motors, drives, and control panels Diagnosing faults across single-phase and three-phase (415V) systems Working with AC/DC systems, inverters, and PLCs (Siemens) Reading and interpreting engineering drawings Using CMMS systems (Maximo) Supporting installations, upgrades, and project work Identifying root causes and contributing to continuous improvement initiatives Sector – Factory Maintenance Non-Negotiable Requirements Electrical maintenance experience within a fast-paced manufacturing environment Requirements for the Electrical Maintenance Engineer Hands-on electrical fault-finding experience Recognised engineering qualification (NVQ Level 3 or equivalent) Experience working in industrial/manufacturing environments Ability to work independently and as part of a team Strong communication skills and proactive mindset Desirable Requirements Experience with Siemens PLCs (fault finding) Background in high-speed or automated manufacturing Continuous improvement experience The Electrical Maintenance Engineer will benefit from: Working for a market-leading manufacturing business Competitive salary with regular overtime opportunities Overtime rates: Midweek – 1.5x Saturday – 1.5x Sunday & Bank Holidays – 2x Pension (4.5% matched contribution) Death in service (4x salary) Sick pay after 6 months 25 days holiday + additional allowances Strong team culture and supportive environment Training, development, and project exposure Additional Information This role would suit a proactive, hands-on engineer who enjoys working in a fast-paced environment and takes pride in identifying root causes and driving improvements. The site operates with a strong team ethic, and communication is key—especially during shifts where engineers may work closely in small teams. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. Top of Form Bottom of Form

HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Trainee Service Technician Haydock, St Helens About Us Are you ready to embark on a career with a company that places both its employees and customers at the heart of everything they do? If you're a motivated, customer-focused individual with a clean driving licence and a can-do attitude, we want to hear from you. We are looking for a dedicated Trainee Service Technician to work from our Haydock service centre and cover our customers around the Northwest. The Benefits • Starting salary of £25,000, with estimated potential earnings of approx. £27,000+ with overtime and any on-call covered - Additional payments for on-call when covered - Contributory pension scheme - 33 days’ annual leave entitlement - Discounts and cashback on shopping, supermarkets, and holidays as part of our rewards scheme - Salary Sacrifice Schemes, including Cycle to Work - Full induction, training programme, and support from dedicated team members - Receive a treat on your birthday - Death in Service benefit provided - Be a part of an Employee Ownership Trust (EOT) and the associated benefits of having a stake in the company The Role As a Trainee Service Technician, you will ensure an effective and timely delivery and maintenance service to our customers. After training, this will include the delivery and set up of products for patients, within agreed delivery times, repair and proactive maintenance of products and support at the delivery stage to customers in various clinical environments. This role follows our Career Pathway, with clearly defined training, experience, and knowledge to enable you to progress your career with Medstrom. Main responsibilities of the role: • Deliver clean, ready-to-use products to and around customer sites - Collect products after use and return them to the service location for cleaning - Disinfect, function check, repair and electrical safety test products - Complete records of testing, delivery and collection - Maintain available product stock and spare parts inventory - Complete product modifications when required - Provide product demonstrations and basic training to staff - Maintain a clean and tidy work environment Hours of work: 37.5 hours per week, working 1 in 3 weekends, with the following Thursday and Friday off. About You To join us as a Trainee Service Technician, ideally, you will need to have or be willing to develop the following: Qualifications and experience requirements: • Mechanical or electrical background desirable, but not essential, as full training will be provided - Experience of delivery driving and planning routes would be desirable - Full UK driving licence required (we use long wheelbase vans, but training and support to build confidence in manoeuvring these vehicles will be provided where required) Personal Requirements: • A proactive, ‘can-do’ attitude - Excellent customer service and communication skills - Ability to work under own initiative, and follow procedures to achieve deadlines - Basic PC skills, including email and MS Office - DBS checked (or the willingness to complete one) Please note, this role will involve manual handling - lifting, carrying, and loading Medstrom products into the van. Why join Medstrom? Established in 2010, Medstrom has grown substantially by being patient-focused to become the organisation we are today, whilst maintaining an open culture and ethos. In 2022, Medstrom became an Employee Ownership Trust (EOT), unlike any other company in the industry. This allows each employee to have a vested interest in the company, where we can all contribute to and share in the company’s success. In addition to the salary and related benefits, you will join a company which has grown extensively within the last five years and, through our unique ownership model, is continuing to grow whilst offering great career opportunities for those who are keen to progress. Webrecruit and Medstrom are equal opportunities employers, value diversity and are strongly committed to providing equal employment opportunities for all employees and all applicants for employment. Equal opportunities are the only acceptable way to conduct business and we believe that the more inclusive our environments are, the better our work will be. Medstrom operates a zero-tolerance policy to any harassment, of any kind, towards our colleagues. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency