Installation manager jobs in Newcastle Upon TyneCreate job alerts

Electrical Installations Manager LocationUK Wide | Remote, Site and Office Visits Employment TypeFull Time | Permanent SalaryUp to £60,000 depending on experience Overview We are seeking an experienced Electrical Installations Manager to oversee electrical installation works across commercial solar PV projects throughout the UK. This role involves managing Electrical Leads and installation teams deliver... ZIPC1_UKTJ

Mechanical Installation Manager Location North UK | Site Based Employment Type Full Time | Permanent Salary £50,000 to £60,000 depending on experience Overview We are seeking an experienced Mechanical Installation Manager to oversee mechanical installation teams across projects in the North of the UK. This role will sit within a growing renewable and energy solutions business delivering solar PV, heatin... ZIPC1_UKTJ

Exciting opportunities available for Electrical Engineers with high voltage (HV) experience to work for an organisation that distributes, delivers and maintains electricity supplies across the North East, Yorkshire and North Lincolnshire. The role is to manage HV distribution projects at various voltage levels, including 11kV and 132kV and could involve new connections, network extensions, reinforcements or major substation schemes. Responsible for projects from concept to completion, the HV Engineer will lead the design phase and on-site construction and installation works. Previous experience in the HV, T&D, power distribution or new connections sectors is preferred, either as a Project Engineer, Project Manager, Field Engineer or Design Engineer. However, applications will also be considered from people working in related sectors, with strong transferable project management skills. Applications are welcome from Design Engineers employed by an Independent Connections Provider (ICP), looking for a new challenge in the HV industry. Qualifications in Electrical Engineering are required and a driving licence is essential. This is an excellent opportunity for career development in the power engineering sector - apply to Andrew Snelgrove at Deploy.

Electrical Contracts Manager – Renewables, Solar & Project Delivery Gateshead (Office‑based with national travel) | Competitive + Car + Bonus + Benefits Join a growing, down‑to‑earth renewable energy contractor delivering large‑scale solar and low‑carbon installations across the UK. This is a hands‑on Contracts Manager role with a strong office base, where you’ll take ownership of projects, work closely with leadership, and play a key part in delivering government‑backed Net Zero programmes. This is a brilliant opportunity for a strong electrician or Electrical Project Manager ready to step up into a Contracts Manager role, with full support and investment from a business that genuinely develops its people. Why Join This Business? • Straight‑talking, supportive leadership team – no red tape or corporate nonsense, • Genuine opportunity to step up into a Contracts Manager role from electrical or PM background, • Strong investment in people, development, and long‑term career progression, • Stable pipeline of work (3–5 years secured) across major government‑backed schemes, • Predominantly office‑based role with structured site visits – not constantly on the road, • Work on meaningful projects supporting the UK’s Net Zero transition, • Competitive package including company EV, bonus, private healthcare What You’ll Do: • Manage renewable energy contracts from planning through to completion, • Oversee installation of Solar PV, battery storage and low‑carbon systems, • Coordinate subcontractors, site teams and project delivery across multiple jobs, • Monitor project performance against KPIs, SLAs and budgets, • Handle contract variations, risks and commercial elements of delivery, • Act as the key point of contact for clients, ensuring smooth communication and delivery, • Ensure all works comply with UK building regulations, MCS standards and H&S requirements, • Support and mentor junior team members as the function grows What We’re Looking For: • Strong electrical background (e.g. Electrician, Supervisor, Project Manager), • Experience delivering or supporting electrical / building services projects, • Understanding of UK building services regulations and compliance, • Exposure to project management or contract delivery (formal title not essential), • Ability to manage subcontractors and coordinate multiple workstreams, • Commercial awareness and confidence dealing with clients, • Proactive attitude – someone keen to step up and take ownership Qualifications: • NVQ Level 3 in Electrical Installation (or equivalent), • 18th Edition (BS 7671), • Solar PV / renewables knowledge beneficial but not essential Who This Role Suits Best: • Electrical Project Managers looking for more ownership, • Senior Electricians / Supervisors ready to move into management, • Candidates who want less site travel and more structured, office‑based work, • People who prefer a straightforward, no‑nonsense working environment If you're an electrically qualified professional looking to take the next step into contracts management within a growing renewables business, we’d love to hear from you. Apply now or get in touch for a confidential conversation.

Are you an experienced Mechanical Project Manager looking to join a leading Mechanical & Electrical Contractor with a strong portfolio of success and continuing to grow ? This is an exciting opportunity to play a key role in delivering high-value projects across the Education, Healthcare, and High End Commercial sectors\n\nOur client is a well-established M&E contractor with a turnover of over £75 million, delivering complex and high-quality building services projects across the North East and beyond. Known for their commitment to excellence, safety, and innovation, they operate across a wide range of public and private sector projects.\n\nAs a Mechanical Project Manager, you’ll take full ownership of all Mechanical works on a variety of projects, managing teams and subcontractors, ensuring delivery on time, within budget, and to the highest quality and compliance standards.\n\nKey Responsibilities:\n\n \n\n Manage the full lifecycle of mechanical installation projects from pre-construction to handover\n\n \n\n Coordinate site activity with internal teams and external sub contractors\n\n \n\n Monitor project timelines, costs, and quality assurance\n\n \n\n Ensure full compliance with health & safety and relevant legislation\n\n \n\n Report progress and provide updates to Operational Management\n\nRequirements:\n\n \n\n Proven experience in Mechanical Project Management within the M&E sector\n\n \n\n Strong background in delivering high value projects\n\n \n\n Excellent leadership, coordination, and communication skills\n\n \n\n Knowledge of current building regulations and compliance standards\n\n \n\n SMSTS, CSCS, and relevant mechanical qualifications\n\n \n\n Full UK driving licence and willingness to travel across the North East\n\nThe opportunity will offer the successful individual ;\n\n \n\n Competitive salary\n\n \n\n Company car or car allowance\n\n \n\n Generous holiday entitlement & pension scheme\n\n * \n\n Career development and progression

Our client is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.\n\nThrough their market leading technical expertise, they enable the world’s digital infrastructure and develop the built environment whilst also helping clients realise ambitious plans for zero carbon-built environments. They cover the entire life cycle of any building project, with their broad capability saving their clients time, money, and effort. Their approach is centred around listening to their clients and interacting energetically with their fellow project stakeholders. They add value with their people, client service ethos, global delivery strategy, technical ability, and attitude.\n\nThey are seeking a fully experienced Associate Design Manager to be based in their Newcastle office with the ability to inspire others and will be responsible for running major projects.\n\nRole Responsibilities\n\n Responsible for running of Major projects.\n\n Takes Team Management role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (majority of building types)\n\n Carries out cost and profit diagnosis on projects including feasibility studies and preparation of fee bids\n\n Reviews status advised by project personnel and external parties and modifies schedules or plans as required.\n\n Prepares project reports for Management, Client or others.\n\n Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes\n\n Surveys tests and reports on existing electrical/mechanical installations\n\n Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements\n\n Represents Company at technical meetings with customers, professional teams and contractors teams\n\n Ensure engineering calculations and drawings meet required robust industry and legal standards\n\n Day to day decision making on project progress and direct liaison with, and provides advice to client\n\n Ensures risk and performance monitoring analysis takes place through effective systems of internal control and delegation\n\n Leads on the coordination of engineering services Takes a holistic view in the selection and application of engineering concepts and solutions\n\n Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective\n\nRole Requirements\n\n BSc/BEng in appropriate engineering discipline or have sufficient equivalent experience\n\n MCIBSE/MIEE or HND/HNC + appropriate experience or equivalent\n\n Chartered Eng status\n\n Knowledge of MS office applications word, excel etc\n\n Chairing/facilitation of meeting skills\n\n Background in consulting or construction preferred.\n\n Good understanding of international working and business operations of a global consultancy.\n\n Act in an ethical manner and follow the principles of the Ethics Charter and Ethics in Practice Guidelines of the Group\n\nBenefits\n\nOur client offers a range of benefits including but not limited to:\n\n Annual leave rising to 28 days annual\n\n Holiday purchase and buy back scheme\n\n Hybrid Working\n\n Contributory company pension scheme\n\n Healthcare Scheme (Company funded cover is dependent on level)\n\n Non-contractual bonus awards\n\n Training sponsorship\n\n Salary commensurate with experience.\n\nIf you are interested please send your CV to Ben

Join a global leader in decentralised automation technology, delivering innovative solutions that streamline electrical installations and improve machine efficiency. With a strong focus on connectivity, I/O systems, and power distribution, you will support manufacturers and systems integrators in optimising performance across modern industrial environments throughout the Northern Region of the UK.\n\nNorthern Area Sales Manager\n\n£45000 - £60000 + Company Car, Bonus, Private Medical, Pension\n\nHome Base. Ideal North East. Ref: 25367\n\nWe are seeking a proactive and commercially driven Sales Executive to join our growing team. This role is ideal for someone who thrives on building relationships, identifying new business opportunities, and staying ahead of market trends.\n\nYou will play a key role in driving revenue growth by developing client partnerships, delivering tailored solutions, and anticipating future industry developments to position our products effectively. Key Responsibilities:\n\nSales & Business Development\n\nIdentify and engage prospective customers through research, outreach, and networking\n Develop innovative sales strategies to attract and retain clients\n Build strong, long-term relationships with existing and new customers\n Offer tailored product solutions based on individual client needs\nClient Management\n\nConduct regular client visits and maintain consistent communication\n Educate clients on product updates, features, and benefits\n Handle customer enquiries and resolve complaints efficiently\n Arrange product trials and demonstrations where appropriate\nCommercial & Administrative Duties\n\nPrepare and follow up on quotations and proposals\n Negotiate contracts, pricing, and payment terms\n Ensure adherence to company payment policies\n Maintain accurate sales records and produce regular reports\n Submit weekly sales reports and expense claims\nMarket Awareness & Strategy\n\nMonitor industry trends and predict future market developments\n Maintain up-to-date knowledge of company products and competitor offerings\n Develop a strong understanding of customers’ industries and challenges\n Provide insights and feedback to management on customer needs and market opportunities\nOperations & Support\n\nCoordinate delivery, installation, and servicing of products\n Ensure after-sales support, including handling faults and servicing requests\n Assist in planning sales budgets and targets\n Represent the company at trade shows, exhibitions, and conferences\nWhat We’re Looking For\n\nProven experience in sales, business development, or account management\n Strong communication, negotiation, and relationship-building skills\n Ability to work independently and manage a weekly schedule of client visits\n Commercial awareness with the ability to spot trends and opportunities\n Highly organised with good reporting and administrative skills\n Full UK driving licence\nWhat We Offer\n\nCompetitive salary with performance-based incentives\n Exposure to industry events and networking opportunities\n Supportive and dynamic team environment\nIdeally located in North East region, this role will cover all northern regions including Scotland.\n\nFor further information please contact Sharon Hill

• Superb opportunity for a sales professional in KBB / Interiors / Plumbing & Heating or Construction to join a market leader (field sales / account management) Area Sales Manager – KBB Products Area: South Scotland / Tyne & Wear / Cumbria KA, ML, EH, TD, DG, CA, NE, SR & DH. Excellent opportunity to join a well established and growing manufacturer within the KBB and plumbing products sector, supplying a wide range of independent merchants, national merchant groups and showroom partners across the region. We are looking for a commercially driven field sales professional with experience selling KBB, plumbing & heating or building products into merchant and showroom environments or a merchant sales person (external or an internal branch based sales person looking to elevate their career). The role of Area Sales Manager • Developing and growing established merchant and showroom relationships across the region, • Increasing product visibility, display and stock footprint within branch networks, • Driving incremental sales growth through trusted, long-term partnership style account management, • Cross selling and up selling a wider range of products into existing accounts to maximise share of wallet, • Building strong relationships with branch managers, buyers and showroom consultants to become a key supplier partner, • Managing key national and independent merchants including MKM, Huws Gray and Wolseley at branch level, • Supporting KBB studio and showroom partners with product knowledge and sales support, • Identifying and unlocking further growth opportunities within an established, high potential territory The Company hiring an Area Sales Manager Our client is a well established and growing specialist manufacturer within the KBB and interior solutions sector, recognised for delivering high quality, design-led and performance-driven product systems for both residential and commercial applications. With a strong heritage in product development and innovation, the business has built an excellent reputation for combining modern design with practical, installer-friendly solutions that perform across a wide range of projects. They are a trusted supplier within the KBB and interiors market, with a well-balanced presence across both merchant and showroom channels, supported by strong relationships throughout the UK distribution network. Key strengths include: • Consistent investment in product development and innovation, • Strong reputation for quality, reliability and ease of installation, • Well established relationships across merchant and showroom partners, • High level of customer support, marketing and sales enablement, • Continued growth across the UK with clear long term expansion plans The business is in an exciting phase of development, offering genuine long term career prospects within a supportive and commercially focused environment. Structured training, strong onboarding and clear progression pathways are central to how they develop their people. The candidate for the Area Sales Manager role • KBB products, • Plumbing & heating products, • Bathrooms / sanitaryware, • Merchant sales, • Building materials, • Interior / decorative products Suitable candidates could currently be working as: • Area Sales Manager, Business Development Manager, Regional Sales Manager, Territory Manager, Key Account Manager, Merchant Sales Representative or Internal Sales professional looking to step into a field based role. If you are a relationship-led sales professional who enjoys developing long term partnerships and growing existing business within a strong merchant and showroom network, this is an excellent opportunity to join a business with a high quality product range and genuine long term potential. The Package on offer for the Area Sales Manager • £42,000 basic salary, • 20% bonus, • Choice of hybrid company car or EV option, or £6,000 car allowance, • Stakeholder pension scheme, • 25 days holiday plus bank holidays Ref: CPJ1840

Service Engineer \n \nEarn great money working as a Controls, Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, PLC control and automation systems for the marine industry. Field based but commutable to Bristol, Liverpool, Newcastle or Maldon in Essex, we offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. \n \nSALARY: Up to £65,000 \n \nBENEFITS: \n· Overtime on all work over 37 hours (with premium for weekend / bank holidays) \n· Company vehicle \n· Annual bonus \n· Holiday allowance which increases with overtime \n· Private healthcare \n· Pension. \n \nLOCATION: Bristol, Newcastle upon Tyne, Liverpool or Maldon (Essex) \n \nCOMMUTABLE LOCATIONS: Bath, Cheltenham, Gloucester, Weston Super Mare, Sunderland, Middlesbrough, Darlington, Warrington, Manchester, Chester, Chelmsford, Basildon, Colchester, Braintree, Bishop's Stortford, Dartford, Dagenham, Harlow, Haverhill, Southend on Sea \n \nWHY SHOULD I APPLY? \n· This is a growth position with a profitable and developing company. Now is a great time to join us! \n· Our generous overtime means you can earn an excellent salary. \n· Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. \n· Be part of a team of experts and become an expert yourself in a niche field. \n \nJOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry \n \nThis is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. \n \nThis role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK. \n \nThe remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party Instrumentation, PLC controls and automation equipment or machinery. \n \nThe majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Australia, Dubai and the USA. \n \nREQUIREMENTS: Electrical / Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry \n \nWe require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience of instrumentation and / or understanding of PLC control systems would be an advantage. You must be prepared to travel and stay away as required. \n \nTHE COMPANY: \n \nWe are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. \n \nPROSPECTS: \n \nExcellent earning potential in this role. We also have a track record of promoting from within where possible. \n \nIt is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Fault Finding Engineer, Repair Engineer, Applications Engineer, Project Engineer, Project Manager - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, PLC Engineer, Rockwell, Mitsubishi, Siemens, Omron. \n \nPlease Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. \n \nREF: SP8495, Wallace Hind Selection

Exciting opportunities available for Electrical Engineers with high voltage (HV) experience to work for the Distribution Network Operator (DNO) Northern Powergrid!\n\nThe role is to manage HV distribution projects at various voltage levels, including 11kV and 132kV and could involve new connections, network extensions, reinforcements or major substation schemes. Responsible for projects from concept to completion, the HV Engineer will lead the design phase and on-site construction and installation works.\n\nPrevious experience in the HV, T&D, power distribution or new connections sectors is preferred, either as a Project Engineer, Project Manager, Field Engineer or Design Engineer. However, applications will also be considered from people working in related sectors, with strong transferable project management skills. Applications are welcome from Design Engineers employed by an Independent Connections Provider (ICP), looking for a new challenge in the HV industry. Qualifications in Electrical Engineering are required and a driving licence is essential.\n\nThis is an excellent opportunity for career development in the power engineering sector - apply to Andrew Snelgrove at Deploy

Are you an experienced Project Manager with a background in renewable energy and commercial Solar PV installations? An exciting opportunity has arisen to join a growing and innovative renewable energy business delivering projects across the UK.\n\nThe Role\n\nAs Project Manager, you will take ownership of renewable energy projects from initial planning through to successful completion. You will be responsible for coordinating teams, managing budgets and schedules, overseeing subcontractors, and ensuring projects are delivered safely, on time, and to the highest quality standards.\n\nKey Responsibilities\n\n Plan, coordinate, and deliver renewable energy projects nationwide\n\n Manage project budgets, schedules, resources, and logistics\n\n Oversee subcontractors and monitor performance\n\n Conduct site inspections and ensure compliance with quality and safety standards\n\n Liaise with clients, suppliers, and internal teams to maintain effective communication\n\n Track project progress and resolve issues proactively\n\n Ensure all projects meet client requirements and regulatory standards\n\nAbout You\n\n Proven experience in Project Management, including budget control and team coordination\n\n Strong organisational, leadership, and problem-solving skills\n\n Experience managing project deliverables and meeting deadlines\n\n Knowledge of site inspections, quality assurance, and health & safety compliance\n\n 18th Edition Wiring Regulations qualification (essential)\n\n Full UK driving licence and willingness to travel to sites across the UK\n\n CSCS Card and/or SMSTS/SSSTS certification (desirable)\n\n Commercial and retrofit Solar PV installation experience (essential)\n\nWhat's on Offer?\n\n Competitive salary of £50,000 – £55,000\n\n Hybrid working arrangement\n\n Opportunity to work on impactful renewable energy projects\n\n Career progression within a growing sector\n\n Supportive and collaborative team environment\n\nIf you're looking to play a key role in the UK's transition to renewable energy and have the experience required, we'd love to hear from you

FIELD SERVICE TECHNICIAN – UK MARKET WHY YOU WOULD CHOSE AB In AB we work in a multicultural context with over 1,500 employees in offices in 22 countries around the world between Europe, North America and South America. Our commitment is to continue to look for a better way to write our future in an even more sustainable way, involving all our partners and starting from the desire to establish a relationship with the candidate that respects diversity, equity, through a recruiting process free from prejudice and discrimination. Sustainability is not only our core business but also our way of working. We have technologies and software that allow us to optimize the time and effort of the selection process by allowing the constant updating of applications and that improve the "candidate experience", a process of mutual knowledge in which the candidate expresses his or her professional and personal ambitions that the Talent Acquisition experts match with the company's professional opportunities, to immediately establish a transparent relationship of comparison and orientation. YOUR CHALLENGES In this role, the Field Technician will carry out regular services, diagnosis and adjustments of client’s assets to achieve optimum performance of the biogas upgrading process, High pressure Reciprocating and screw compressors and auxiliary equipment. Responsibilities will include the installation, commissioning, maintenance and service tasks on biogas/Natural equipment. • Maintain, analyze, assess, diagnose, troubleshoot and repair various OEM scope as installed at client sites, • Perform Minor and Major Overhaul., • Assist the Service Area Manager (SAM) establish parts and labour estimates required for equipment and system repairs., • Maintain, establish and identify Service vehicle tooling/parts/etc. requirements., • Complete detailed Field Service’s Report before leaving a client site and submit expenses weekly to the SAM or his alternate., • Proactively prepare materials list for preventative and corrective work, • Proactively review assigned materials necessary for maintenance actions, informing the SAM/purchasing if further materials are required, • Install, configure, and calibrate equipment, providing staff training on safe usage, • Troubleshoot process issues both onsite and remotely as part of an on-call rotation, • Test, maintain, and modify existing systems to ensure optimal performance, • Conduct Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs) for equipment upgrades, • Execute scheduled and reactive maintenance according to company Standard Operating Procedures (SOPs), • Log data, monitor trends, and implement solutions both onsite and remotely, • Comply with the company's Health & Safety Policy and Quality Management System, • Coordinate, manage, and supervise subcontractors on site to meet service requirements, • Be available for regular travel within the UK, Europe, and occasionally internationally, • Commit to Quality, Health, Safety, and Environmental standards, • Foster a culture of continuous improvement and lead by example to achieve and exceed company goals, • Engage in ongoing training and meet compliance requirements for the industry WHY WE WOULD CHOOSE YOU • Engineering Degree/HNC/HND qualification is desirable, or equivalent education and experience, • Multi-skilled bias 75/25 mechanical/electrical preferred, • A good understanding and ability to work with PLCs, • Electrical diagrams and drawings, • Flexibility with working hours, as being part of an On-Call Rota and call out service is expected (On-call & Overtime Paid), • Own relevant experience with industry, CHP Gas Engines, Biogas, Anaerobic Digestion, Marine Engineering (pumps, motors), and Power Generation, • Self-motivated and able to work in small groups/teams and alone, • Driving license to allow traveling around the UK/EU and international travel, • Carrying out a mixture of scheduled service and reactive work, • Good time management skills, • Ability to prepare technical reports for both internal and external customers, • Technical knowledge of: compression, HX, pump, valve & pressure vessel systems, • Excellent communication skills, both written and oral with the ability to work with international colleagues, • Great attitude, personable, courteous and a great team player QUALIFICATIONS/CERTIFICATES: (WE WILL TRAIN) H2S Awareness DSEAR COMPEX (Mechanical or Electrical) IPAF Gas Safe AB thanks you for your application. Follow us on our social media channels! Thank you, AB Talent Acquisition Team.

We are supporting the growth of a leading engineering team within the offshore wind sector and are seeking a Senior or Principal Project Engineer to play a key role in delivering complex offshore wind projects, with a particular focus on offshore substations (OSS). This is a high-impact opportunity within a strategic growth area, offering the chance to combine engineering excellence, project leadership, and client-facing responsibilities. In this role, you will contribute to the technical delivery of multi-disciplinary offshore wind projects, taking on responsibilities such as Package Lead or Deputy Engineering Manager. You will be involved across engineering design, Owner’s Engineer services, and consultancy-led work, supporting the delivery of both large-scale projects and smaller, standalone commissions. A key part of the role will involve overseeing and reviewing engineering deliverables across disciplines, while also providing hands-on technical input, particularly in critical areas such as offshore substation topside layout design. You will play an active part in Owner’s Engineer assignments, coordinating design reviews and developing key technical documentation including Basis of Design, Technical Specifications, and Employer’s Requirements. You will also support procurement activities for major offshore assets, ensuring alignment with technical, commercial, and project delivery requirements. The role requires strong focus on risk management, programme delivery, and ensuring compliance with applicable standards and industry best practices. Alongside project delivery, you will support internal improvements by working closely with the Engineering Manager to enhance processes and efficiencies. You will collaborate across a broad range of teams including engineering, project management, environmental, advisory, and asset management functions, ensuring integrated and high-quality project outcomes. You will also play an important role in business development activities by identifying new opportunities within offshore wind, contributing to bids and proposals, and representing the organisation in technical discussions with clients and stakeholders. This includes developing and reviewing technical content for tenders and supporting strategic growth initiatives within the sector. The successful candidate will hold a Master’s degree in Structural, Civil, Mechanical, or a related engineering discipline and will be either Chartered or working towards chartership. You will bring strong experience in offshore wind engineering, with a particular focus on offshore substations, and demonstrate a proven track record of delivering projects through FEED stage or beyond. Experience contributing to offshore substation topside design and layout is considered critical for this role, along with a strong understanding of the offshore wind project lifecycle and relevant technical standards. Additional experience in detailed design, fabrication, or transport and installation of offshore substation topsides would be advantageous, as would exposure to both consultancy and developer environments. Experience in procurement processes, including preparing Employer’s Requirements, tender documentation, and evaluating bids, is also desirable. Broader knowledge of substation foundations, geotechnical considerations, site investigations, certification, and CAPEX estimation would be beneficial. This role requires excellent communication skills, both written and verbal, alongside strong organisational and leadership abilities. You should be comfortable managing complex stakeholder environments and balancing multiple priorities, with a proactive mindset and a strong interest in contributing to the continued growth and innovation of the offshore wind sector. Candidates who may not meet every requirement are still encouraged to apply if they have relevant and transferable experience.

Site Manager – Wind (UK, Rotational) Location: Remote with UK-wide site rotation Sector: Wind Energy Salary: Competitive + Benefits Eleven are partnering with a leading Wind Turbine Manufacturer with a strong UK presence, delivering large-scale multi-MW projects. Due to continued growth, they are looking to appoint an experienced Site Manager with wind industry expertise to support project delivery across the UK. This is a remote based position with regular site rotations, giving you the opportunity to work on a variety of wind projects nationwide. The Role As Site Manager, you will play a key role in supporting the successful delivery of new wind farm installations, major repairs, and maintenance projects. You will work closely with project teams, contractors, and stakeholders to ensure projects are completed safely, on time, and to the highest standards. Key Responsibilities • Manage day-to-day site activities on wind turbine projects, • Support project teams to ensure delivery against timelines and milestones, • Coordinate and oversee all work on site, • Work closely with specialist contractors to ensure safe and efficient execution, • Scope and plan electrical works packages in line with project requirements, • Ensure compliance with industry regulations, HSE standards, and best practices, • Assist the commercial/sales team with technical input for bids and tenders About You • Proven experience in a Site Manager or similar role within the wind industry, • Experience working on wind turbine installation, servicing, or maintenance projects, • Solid understanding of industry regulations, safety standards, and best practices, • Strong organisational skills with the ability to manage multiple priorities on site, • Comfortable working in a rotational, UK-wide site-based role

EMS Installations Electrician Salary of between £40,000 - £45,000 (DoE) This role will include a company van and overnight allowance when working away - Overnight Allowance of £50 per day (after tax) Make a difference: Your work will contribute to limiting the increase in global temperatures by helping businesses reduce carbon emissions and improve their sustainability. Learn from industry-leading experts: We have cultivated some of best talent in the industry, allowing you to supercharge your career progression and learn from the best minds out there. What’s in it for you? • Competitive salary, • Premier Inn Card, Fuel Card, CEF Card, • Monday to Friday, 9–5 working hours, • Additional December leave and company incentives, • Additional overtime pay Hi, we’re ClearVUE ClearVUE.Business is a leading environmental and energy consultancy, driven by a commitment to data-driven net-zero strategies. Our mission involves collaborating with companies across diverse sectors to formulate and implement carbon reduction and energy efficiency strategies within the broader context of their ESG initiatives. Through advanced energy and carbon assessments, coupled with strategic planning and implementation services, supported by cutting-edge infrastructure technology, we’re pioneering revolutionary solutions to help businesses reduce their environmental impact incrementally. Join our global team, with our vibrant head office in the UK and offices across Europe, India & Dubai. At NGP, you’ll work alongside experts in energy consultancy, procurement and trading, utilising AI tools to build solutions that drive measurable impact for thousands of organisations worldwide. The opportunity As our EMS installations Electrician, you will work alongside the ClearVUE services Team to install and maintain Energy Management Systems across the UK. This role involves travelling and working away on average of 3-4 nights per week, for which you will receive an overnight allowance. What exactly what will you do? • Survey of sites prior to installation to establish safe process for the addition of an EMS and creation of stock/materials lists, • Conduct safe and correct installation of Energy Monitoring Systems including completion of electrical installation, networking to ensure internet connectivity, and commissioning of system, • Fault finding and maintenance of systems, • Completing all relevant associated administrative work including circuit lists, schematics and job/work sheets outlining the tasks completed, • Ensure the installations comply with all company operating policies and procedures, • Work closely with Health & Safety Advisor to ensure compliance with relevant legislation as well as safe installations for both client and electrician, • Work closely with Electrical Manager to identify any lessons learned or areas where processes can be streamlined What we’re looking for • Fully qualified electrician, • 18th Edition City and Guilds Qualified (Level 3), • Full UK driving licence, • Experienced in industrial and commercial installations, • Good level of IT knowledge, • Confident working independently and accessing support and advice when necessary, • Achieving and exceeding work performance targets and adhering to health and safety procedures, industry standards and codes of practice Subject to DBS check due to restrictions on certain sites Equal Opportunities Statement Global Procurement Group (GPG) is an equal opportunities employer committed to creating an inclusive and diverse workplace where people are treated with fairness, dignity and respect. We aim to ensure our recruitment processes are fair, consistent, and free from bias. All applications are assessed based on skills, experience and alignment with the requirements of the role, and we strive to provide equal opportunity for all candidates at every stage of the recruitment process.

Position: Refrigeration Design Engineer (Industrial Refrigeration) Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: up to £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration – Food/FMCG, Cold Storage & Logistics, Data Centre PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. The Role: To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design post sales stage and convert into live project for delivery team, • Conduct heat load calculations, produce engineering sheets and pipework isometric, • drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team, • Raise Contract Approval Form to enable project to be booked on system, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM during delivery phase for design queries, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs All contracts over £500k to have contract/design review with senior member of staff, • To identify means of generating extra revenue through new initiatives (forward thinking) People • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance • Ensure that all relevant company and legislative policies and best practices are adhered to and always maintained, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for, • improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency

SPMT Operator Location: UK Wide Allelys are a heavy lift, transport and installation specialist and our role is to bridge the gap between the country’s green objectives and the critical infrastructure required to meet these targets. It’s more complex than just owning an equipment fleet – our knowledge and expertise directly impact the tangible delivery of a greener future We are looking to recruit an SPMT Operator to operate Self-Propelled Modular Transporters (SPMTs) and supporting equipment on heavy lift, project cargo and installation contracts, moving loads from 50 tonnes up to several thousand tonnes for the UK’s energy, power generation and heavy industry sectors. This role involves working on various projects across UK and Ireland. Duties: • Operating SPMTs and PST/SL modular trailers to load, transport, manoeuvre, and set down abnormal and heavy loads — transformers, generators, turbines, vessels, bridge sections, and similar — to millimetre tolerances on customer sites., • Configuring, coupling, and decoupling SPMT axle lines into the required trailer combinations (single-wide, double-wide, side-by-side, drawbar arrangements) to RAMS (Risk Assessment Method Statements), Safe Systems of Work and Lift Plans as applicable., • Connecting and operating Power Pack Units (PPUs), managing hydraulic suspension, steering modes (conventional, crab, carousel, transverse), and load distribution across axle groups., • Carrying out pre-use, in-service, and post-use inspections of SPMTs, PPUs, ballast tractors, lifting equipment/accessories, and ancillary equipment. Reporting any equipment malfunctions, damage or defects, near-misses, incidents or accidents to the Site Supervisor and/or Project Manager / Operations Manager., • Working to project-specific RAMS, following ground bearing pressure calculations and stability checks., • Working to authorised Management of Change documentation should site conditions require deviations from the agreed plan., • Pre and post inspection of all equipment used on site, recording defects and removing damaged items from service in accordance with regulations and procedures., • Travelling to and working remotely for the duration of projects, including overnight stays, weekends, and night moves to meet project requirement Essential Skills Required: • SPMT experience is essential, • Previous experience in heavy-lift, abnormal load, or project cargo installations., • Sound understanding of load distribution, ground bearing pressure, and the stability principles set out in the ESTA SPMT Best Practice Guide., • High level of attention to detail and ability to work in accordance with instructions as specified in the project RAMS (Risk Assessment Method Statement), • Ability to identify hydraulic, electrical, and structural issues on SPMTs and PPUs., • Resilient and able to work under pressure, often to tight project windows and customer deadlines. Desirable Skills: • CPCS / NPORS / ALLMI tickets relevant to heavy-lift operations., • Slinger/Signaller and Appointed Person qualifications., • LGV Cat C+E licence with STGO experience., • IPAF, PASMA, working at height, and confined space tickets., • Awareness of CDM 2015 duties on site., • Strong communication and collaboration skills, • Proactive approach to problem solving

Better places, thriving communities. SENIOR COMMISSIONING ENGINEER Rock Power Connections Ltd Homebased/UK At Rock Power Connections, we owe our success to our staff. Within our Technical Operations business we are currently recruiting for a SENIOR Commissioning Engineer. This is your role. What part will you play? • To act as Commissioning Engineer undertaking commissioning activities / duties on a wide range of distribution power system plant, control and protection and other substation equipment to a high level of competence. Responsibilities: Health, Safety, Environmental & Quality: • Attend company authorisation / induction courses as required by Rock Power Connections, • Ensure that personally held test equipment is maintained in good working order and within calibration and to issue for re-calibration within appropriate time scales, • Maintain a safety & zero lost hours culture for all related site activities through good housekeeping, adhering to site safety rules, wearing correct PPE, proactively identifying safety and environmental improvements, offering solutions to issues and corrections to hazards (if appropriate) and applying company specific safety rules. Testing & Commissioning: • Be flexible to travel across the UK when required with fair and reasonable notice, • To attend Commissioning Panel Meetings as required, • To take the role of Lead Commissioning Engineer on designated projects, coordinating and managing commissioning activities, whilst acting as a focal point for the customer, • Completion of Commissioning Inspections, off load commissioning and on load commissioning as identified under the relevant DNO/IDNO Procedures, • To prepare and collate commissioning documentation to be incorporated in to final project folders such as drawing mark-ups and test data / documentation, • To fulfil Commissioning Panel duties within competency e.g., production of commissioning programmes, commissioning method statements, inspection schedules, etc, within specified time scales, • To undertake and complete testing and final commissioning on a wide range of plant and equipment at various voltage levels including fault investigation, diagnostic activities and rectification of faults within competence in accordance with the client's specification and documentation, • To participate, undertake and support FAT's, • To support apprentice commissioning engineers as required and to act as a role Model Staff Development, • To identify and inform Head of Technical Operations when specific product related training is required in order to satisfactorily complete commissioning activities Day-to-Day Control: • Provide technical support and direction, within their competence, to Rock Power Connections Project Team members, including the application of technical standards, • To liaise and work with internal and client Design Engineers to resolve design related queries, • To undertake other activities which the Company may reasonably require to be undertaken on a temporary basis which are within an individual's area of competence, • To report progress and/or problems to the Site Manager or Operations Manager / Engineer responsible for project delivery, • Assist & support the Field team - technical queries, quality plans, project commissioning programs, RAMS & EHS (Environmental Health & Safety) objectives Role Requirements: Working Safely or equivalent i.e. Safety Passport • HNC / Degree in electrical engineering, • DNO Competent Person, • Knowledge of CDM regulations, • Demonstrable extensive experience working as a Commissioning Engineer in Electricity Supply Industry with exposure to LV, MV, HV & voltage schemes, • Demonstrable comprehensive experience of working on a range of protection schemes and protection relays, DC systems, AC systems including primary and secondary injection testing of complex protection schemes., • Demonstrable comprehensive experience of working on various types of power plant and equipment., • Proven fault-finding experience, • Understanding of permit control & Isolations for a variety of clients such as NGED, SSE etc Who are Rock Power Connections? Since our acquisition by the Mitie Group in 2022, we have completed some of our biggest projects to date. These include the installation of EV charging stations at some of the UK's busiest hubs and partnerships with high profile clients such as hi-speed rail network HS2 and Electric Highway Gridserve, whilst continuing to support and grow our long-standing place on the NGED (formerly WPD) framework agreement to deliver new substations, carry out asset replacement and reinforcement works from 11kV through to 132kV We have a lot to celebrate, with full order books, however, as with other successful companies, we face an immediate challenge – the high-quality skills shortage. It's a huge challenge and we're no exception. The green economy in particular offers us massive opportunities, but we are struggling to find the right people. Having the right people and culture has always been key to our success. Rock would not be where it is today without them. If we do say so ourselves, our employee value proposition is fantastic in terms of benefits, packages, learning and development. Our focus continues to be on quality skills and training, and we believe that the Mitie brand combined with our family friendly ethos gives us that competitive edge. Our Commitment to Diversity: Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fuelled by over 130 nationalities. Rock Power Connections celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Our market-leading offering provides you with benefits that suit your lifestyle. We have a virtual GP on hand for you and members of your household. So you can get expert advice by video or phone without having to leave your home. We offer financial wellbeing assistance through our Salary Finance scheme. For example, you could access 50% of your earned pay before payday for a small fee. Salary Finance also offers competitive loans. When you join us, we’ll give you a link to our flexible lifestyle benefits platform, Choices. You might choose to purchase up to five extra days’ holiday each year. You might buy critical illness insurance, seek dental treatment or buy technology products at an affordable cost. There are many choices! We give you access to high street discounts from thousands of well-known retailers, gyms and more through our MiDeals platform. And we have a cycle-to-work scheme. Life cover of up to four times your salary is available. We also offer enhanced pension contributions, a save-as-you-earn scheme, and a Mitie Matching Share Plan (you could even be awarded free shares in Mitie). We award our employees with Mitie Stars as recognition for their hard work. There are cash prizes up for grabs each month and at the end of the year there’s a chance to scoop a top prize of £10,000! Our success is a direct result of the experience and quality of our people. Progressing your career is therefore a top priority for us. We offer a diverse variety of training and development avenues via a wide selection of learning resources to suit you. Since 1987, Mitie’s 80,000 employees have been maintaining companies globally. We are the UK’s leading facilities management and professional services company, and our clients range from household names in banking, critical government sites as well as hospitals and schools. Join our Mitie Team. Together our diversity makes us stronger.

Electrical Installations Manager LocationUK Wide | Remote, Site and Office Visits Employment TypeFull Time | Permanent SalaryUp to £60,000 depending on experience Overview We are seeking an experienced Electrical Installations Manager to oversee electrical installation works across commercial solar PV projects throughout the UK. This role involves managing Electrical Leads and installation teams delivering full electrical scope across commercial and public sector projects. The successful candidate will ensure installations are delivered safely, efficiently and in line with...

Mechanical Installation Manager Location North UK | Site Based Employment Type Full Time | Permanent Salary £50,000 to £60,000 depending on experience Overview We are seeking an experienced Mechanical Installation Manager to oversee mechanical installation teams across projects in the North of the UK. This role will sit within a growing renewable and energy solutions business delivering solar PV, heating, and energy efficiency projects. You will take responsibility for managing engineers on site, ensuring quality delivery, strong engagement, and adherence to standards across all installations. You will be working closely with operations, project management and design teams, playing a key role in delivering projects safely, on time and to a high standard. Key Responsibilities Manage and lead Mechanical Engineers across multiple sites in the North Carry out technical inspections and ensure quality standards are maintained Identify and manage non conformities and drive continuous improvement Engage with site teams, providing clear direction and leadership Ensure compliance across timekeeping, documentation, tools and vehicle standards Support development of Lead Engineers and wider team progression Collaborate with project managers, site managers and design teams Review designs and support planning of installation works

Our client is a well-established business specialising in the design, manufacture, and installation of aluminium systems, delivering high-quality solutions across the commercial and residential construction markets. Due to continued growth, they are now looking to appoint an experienced Sales Manager to join their team in Newcastle. This is an excellent opportunity for a commercially driven individual with a strong background in aluminium systems and specification sales, particularly with experience selling into architects, specifiers, consultants, and contractors. The Role As Sales Manager, you will be responsible for driving new business and developing existing client relationships across the region. You will work closely with architects, design teams, developers, and main contractors to promote the company's aluminium systems and secure project specifications from early design stage through to order. Key Responsibilities • Develop and implement a strategic business development plan, • Secure meetings with architects, specifiers, façade consultants, and contractors, • Promote the company's aluminium systems portfolio, • Drive product specifications at design stage, • Build strong relationships with key decision-makers within the construction market, • Identify and convert new business opportunities, • Manage existing accounts and ke...

Quality Manager • Location: Newcastle, (with travel to sites across the UK), • Rate: £400- £450/day, • Duration: 6 months, • Potential to transfer to permanent employment in the future Turner Lovell are supporting a leading international engineering organisation with the recruitment of a Quality Manager to support a major UK contractor with their delivery of electrical equipment to projects across the UK and Ireland. The organisation provides, installation, commissioning and maintenance services, supporting the reliability and performance of electricity systems. They are keen to redefine and establish a culture where the quality team is embedded and maintained within the project from tender to handover. We are seeking an experienced Quality Mananger to play a key role in ensuring project delivery meets the highest quality, regulatory, and customer standards. This position will suit someone who is proactive, detail-oriented, and confident working across multiple stakeholders within a project environment. Key Responsibilities • Act as the primary point of contact for quality matters with collaborate with Project Managers, commercial teams, customers, stakeholders, and suppliers, to uphold quality throughout the project lifecycle, • Develop and maintain project quality plans aligned with internal and client requirements, • Conduct ...

Construction / Installation Manager is accountable for managing the scope schedule and budget of the assigned project(s). Escalator experience is plus but not mandatory we are calling for applications from Engineering or Construction industries.

A Day Shift opportunity is available for an Electrical Multiskilled Maintenance Technician with a South Tyneside Engineering company . The role is mainly workshop based with some travel Main Duties & Responsibilities Diagnose, fault-find, repair, test, and commission electrical, electronic, and electromechanical systems in workshop and on client sites. Ensure the safe operation of specialist equipment. Diagnose, repair and calibrate instrumentation and control systems. Perform planned preventative and routine maintenance on equipment. Produce accurate risk assessments, reports, certification, and technical documentation. Identify potential regulatory breaches and report findings to the line manager. Provide technical input to sales to ensure correct solutions are specified and quoted. Support continuous improvement by feeding back technical observations and improvement suggestions. Attend client sites as required and act as a professional ambassador for the business. Assist other departments and Group companies when required. Contribute to streamlining processes and procedures. KEY SKILLS The ideal candidate will have a HNC in Electrical and Electronics Engineering with experience as an Electrically biased Technician. You will also have strong Mechanical skills and a good knowledge of PLC based control systems. A good level of competence in cable installation, termination, and wiring of devices/components. Is needed as is pro...

Experienced Mechanical Installation Manager needed to lead installation teams for renewable energy projects in Northern UK.

Service Engineer Earn great money working as a Controls, Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, PLC control and automation systems for the marine industry. Field based but commutable to Bristol, Liverpool, Newcastle or Maldon in Essex, we offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Bristol, Newcastle upon Tyne, Liverpool or Maldon (Essex) COMMUTABLE LOCATIONS: Bath, Cheltenham, Gloucester, Weston Super Mare, Sunderland, Middlesbrough, Darlington, Warrington, Manchester, Chester, Chelmsford, Basildon, Colchester, Braintree, Bishop's Stortford, Dartford, Dagenham, Harlow, Haverhill, Southend on Sea WHY SHOULD I APPLY? · This is a growth position with a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. · Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party Instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Australia, Dubai and the USA. REQUIREMENTS: Electrical / Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience of instrumentation and / or understanding of PLC control systems would be an advantage. You must be prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Fault Finding Engineer, Repair Engineer, Applications Engineer, Project Engineer, Project Manager - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, PLC Engineer, Rockwell, Mitsubishi, Siemens, Omron. Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP8495, Wallace Hind Selection TPBN1_UKTJ

Job title Carpenter Function Fire (Passive) Location Field Based Reports to National Operations Manager (Passive) Responsible for staff N/A About our business JLA is a mission critical infrastructure solutions business offering services Laundry, Catering, Heating, Fire Safety, Infection Control and Air Conditioning. The company offers an end-to-end, on premise, machine supply and breakdown service proposition under the name Total Care, and additional products and services. JLA is driven by a world class Sales & Marketing engine, owns and maintains all assets, and has an efficient on-site operations team working daily with customers. When you join the JLA family, you'll also gain access to an extensive benefits package. We care about our people and take your well-being seriously, which is why we offer a range of supportive tools for health and wellbeing, financial guidance, and legal advice. Our Employee Assistance Programme, 24/7 Wellness and Lifestyle App plus a dedicated team of Mental Health First Aiders are there to support you through life's challenges. We also offer up to 8 counseling sessions, which can be in-person or remote, providing you with the support and flexibility to suit your own personal needs. You can reach any fitness goals with our free onsite gym at head office along with a range of other gym membership discounts available. To offer financial support, we not only provide life assurance coverage, company sick pay, and a company pension scheme, we offer a range of added benefits such as free office parking, eye care vouchers, a cycle-to-work scheme, and exclusive discounts through our staff benefits hub. We really pride ourselves in offering a healthy work-life balance and believe it is important to have time away to recharge which is why we provide 25 days of annual leave plus bank holidays, flexible working options, and enhanced family leave policies. We are a company that appreciates you and invests in your success and even have a Colleague Recognition Scheme to celebrate your achievements. We're dedicated to your growth, offering support in career development and training. We value your referrals, and through our Refer a Friend scheme, you can earn up to £1,000 in bonus rewards! Role overview To install fire doors and frames at a variety of customer premises. Ensuring current fire regulations are adhered to and quality of work is of a high standard. Key tasks Installation of new BM Trada Q Mark Fire Doors and frames To be familiar with and understand the current Fire regulations to ensure the doors are fully compliant. To be able to identify labels, CE marks and Plugs to show that a door is certified. Fire Door Maintenance / Remedial Works Fire Stopping/Compartmentalisation. Service Delivery Demonstrate an understanding of what service delivery excellence is for your role, ensuring you deliver the basics right every time and lead a team where service is central to good performance. To set clearly defined service level agreements for your team. Contribute to the service training across the business. Monitor and report on the KPIs on a daily basis to track progress and backlog for all customers, not exhaustive: Maintenance(PPM), Reactive, Small works Monitor and report job status to ensure all customers SLA and Regulatory (BAFE/NSI) requirements are met and exceeded. People Management Set clear objectives for your team members providing regular feedback on performance. Manage performance across the team to ensure the achievement of service delivery targets in line with Service Level Agreements Manage any employee relations issues in line with the policies set out by the business Coach and develop the team to ensure they perform at a high level, ensuring colleagues maintain appropriate knowledge of the business products Address any training and development needs and ensure teams have a personal development plan. Maintain ongoing communication with employees regarding their wellbeing Managing Risk Awareness of your operational and regulation risks which may impact on your operations. Responsibility for reporting to your line manager any risk which may impact the business. Criteria Essential (attributes required for candidate to be considered) Desirable (attributes can be trained or developed) Knowledge and Skills (what you know and what you can do) Familiar with the BM Trada Q Mark Scheme Install/maintaining fire doors. Experience (what you have done) Proven track record in installing fire doors and/or fire door maintenance. Some fire stopping experience would be beneficial. Personal qualities (the way you think and act) Self-motivated, reliable, punctual and take pride in the quality of your work. Willingness to travel/work away when required. Able to act in a professional manner. Good communication Skills. Qualifications Minimum Level 2 Qualification in Joinery or relevant experience. Full UK Driving license CSCS Card Joinery (Blue) TPBN1_UKTJ

Part of the VolkerWessels UK Group, VolkerStevin is an industry-leading civil engineering business, providing complex and innovative engineering solutions across a wide range of sectors including maritime, flood risk management, defence, energy, water and regeneration. Collaborating with, and drawing on the specialist skills of the group's business units we deliver a truly integrated, multidisciplinary service. VolkerMarine Services have a fantastic opportunity for a Supervisor to join our team. VolkerMarine Services is a specialist service provider to the civil engineering and maritime sectors. Established in 1934, we offer clients around the globe a range of construction and marine plant and equipment for hire and sale Overview: Responsible to Marine Installation Manager, for delivery of safe, environmentally compliant, timely and Right First-Time projects. Will be required to integrate into the team and work in a collaborative manner. The Supervisor will be based in the Morecambe yard, with frequent periods away mobilising jobs. Key Accountabilities: The Supervisor is required to work as part of the projects delivery team, ensuring compliance at site level with VolkerStevin Health Safety Environmental and Quality Systems and Procedures. Safety Ripple (Behavioural Safety) should be at the heart of what we do, and this supervisory role should support and promote the VolkerStevin Way culture across the team. Delivery of the works which includes (but not limited to): To ensure team works in a safe and effective manner to achieve required output and to the required quality. Be confident in briefing your Team to specific works under your control. To supervise the unloading / loading of materials. Ensure team works in a safe and effective manner, ensure compliance with Health and Safety at Work Act and the company health and safety, quality and environmental policies always. Managing your teams safely and ensuring the site environment/work areas/walkways are kept clean in line with site regulations and access/egress points are clearly defined. Motivating your team of operatives to meet deadlines. You are empowered to pause work at anytime you feel it is unsafe to continue works. Assisting multi-disciplinary tradesman / subcontractors and team members as and when needed, contributing to all work involved and Health & Safety. Responsible for Plant and Labour plan allocation sheets / daily diary. Help team Identify what is needed when ordering materials and distributing materials to appropriate locations according to the project plan. If you have plant experience, you may be asked to operate plant when required. Working with the site team on weekly program for your activities About you Person Specification: Good all-round knowledge of Marine activities. Excellent time keeping and attendance is essential. Good communication skills. Able to demonstrate good leadership qualities. Must be available to travel & work from Home if project requires it. Essential: Experience of working in the Marine sector. Overwater training experience. Able to read Stability Calculation Drawings SMSTS Marine First Aid at Work Safety Critical Medical If your past experience doesn't match perfectly with every requirement of the job description, we still encourage you to apply. You may be just the right candidate for us. Why work with us? VolkerStevin is under the umbrella of VolkerWessels UK which is a multidisciplinary contractor that delivers innovative engineering solutions across the civil engineering and construction sectors including rail, highways, airport, marine, energy, water, and environmental infrastructure. By utilising the specialist skills of each business unit within VolkerWessels UK, VolkerStevin are able to ensure our staff provide unrivalled resources and expertise to our clients. We offer competitive rewards and benefits, recognising the value we place on our employees. We offer a range of benefits, including: Competitive salary Competitive annual leave and an additional day off on your birthday Option to buy additional annual leave Private medical care Pension Life Assurance Cycle to Work scheme Shopping and restaurants vouchers, rewards, and discounts Training and development opportunities-comprehensive skills-based training Family friendly polices including enhanced maternity benefits Employee Assistance Flexible working opportunities programme Mental health, physical health, and financial support 24/7 Virtual GP service Fairness, inclusion and respect We believe in pushing boundaries in the pursuit of fairness, inclusion and respect. So, our teams can be comfortable that, whatever their background, VolkerWessels UK is a place where they can be themselves and thrive. If you need support with your application, please contact us at Additional information Note for Recruitment Agencies: Our preference is to hire directly, and we will reach out to our Preferred Supplier List (PSL) agencies if this particular role qualifies for release. We kindly request that you refrain from sending speculative CVs. In the event of speculative CV submissions, no fees will be applicable, and we kindly ask that all inquiries to be directed VolkerWessels UK is committed to maintaining healthy, safe and productive working conditions for its entire staff and therefore a drugs & alcohol screening is mandatory for all. #LI-DL1 TPBN1_UKTJ

Job Title: Site Manager – Substation Project (Renewable Energy - Civils) Location: Newcastle, UK Contract Type: Full-time About the Role We are seeking an experienced Site Manager to lead delivery of a major substation construction project within the renewable energy sector in Newcastle. This is a key position overseeing day-to-day site operations, ensuring safety, quality, and programme performance while coordinating multiple contractors and stakeholders. Key Responsibilities Manage all on-site activities for the substation project, ensuring work is completed safely, on time, and to specification. Lead site inductions, daily briefings, and toolbox talks to promote a strong safety culture. Coordinate and supervise subcontractors, suppliers, plant, and materials. Monitor progress against programme and report regularly to the Project Manager. Ensure all works comply with CDM regulations, client standards, and industry best practice. Maintain accurate site documentation, including permits, inspections, RAMS reviews, and progress records. Liaise closely with engineering, commissioning, and environmental teams. Resolve site issues proactively to minimise downtime. Ensure quality control and adherence to technical drawings and specifications. Represent the project during site audits and client visits. Skills & Experience Proven experience as a Site Manager on substation, HV, or large-scale infrastructure projects. Background in civil engineering on renewable energy, power transmission, or grid-connect projects. Strong knowledge of HV systems, civils, and electrical installation practices. Demonstrable understanding of HSE legislation and CDM requirements. Excellent communication, leadership, and contractor management skills. Ability to interpret technical drawings and manage quality standards. SMSTS/SSSTS, First Aid, and relevant safety certifications. What We Offer Competitive salary and benefits package. Opportunity to contribute to a major renewable energy infrastructure project. Supportive team environment and opportunities for long-term career progression. The chance to make a positive impact in the UK’s transition to clean energy

Electrical Contracts Manager - Renewables, Solar & Project Delivery Gateshead (Office‑based with national travel) | Competitive + Car + Bonus + Benefits Join a growing, down‑to‑earth renewable energy contractor delivering large‑scale solar and low‑carbon installations across the UK. This is a hands‑on Contracts Manager role with a strong office base, where you'll take ownership of projects, work closely with leadership, and play a key part in delivering government‑backed Net Zero programmes. This is a brilliant opportunity for a strong electrician or Electrical Project Manager ready to step up into a Contracts Manager role, with full support and investment from a business that genuinely develops its people. Why Join This Business? Straight‑talking, supportive leadership team - no red tape or corporate nonsense Genuine opportunity to step up into a Contracts Manager role from electrical or PM background Strong investment in people, development, and long‑term career progression Stable pipeline of work (3-5 years secured) across major government‑backed schemes Predominantly office‑based role with structured site visits - not constantly on the road Work on meaningful projects supporting the UK's Net Zero transition Competitive package including company EV, bonus, private healthcare What You'll Do: Manage renewable energy contracts from planning through to completion Oversee installation of Solar PV, battery storage and low‑carbon systems Coordinate subcontractors, site teams and project delivery across multiple jobs Monitor project performance against KPIs, SLAs and budgets Handle contract variations, risks and commercial elements of delivery Act as the key point of contact for clients, ensuring smooth communication and delivery Ensure all works comply with UK building regulations, MCS standards and H&S requirements Support and mentor junior team members as the function grows What We're Looking For: Strong electrical background (e.g. Electrician, Supervisor, Project Manager) Experience delivering or supporting electrical / building services projects Understanding of UK building services regulations and compliance Exposure to project management or contract delivery (formal title not essential) Ability to manage subcontractors and coordinate multiple workstreams Commercial awareness and confidence dealing with clients Proactive attitude - someone keen to step up and take ownership Qualifications: NVQ Level 3 in Electrical Installation (or equivalent) 18th Edition (BS 7671) Solar PV / renewables knowledge beneficial but not essential Who This Role Suits Best: Electrical Project Managers looking for more ownership Senior Electricians / Supervisors ready to move into management Candidates who want less site travel and more structured, office‑based work People who prefer a straightforward, no‑nonsense working environment If you're an electrically qualified professional looking to take the next step into contracts management within a growing renewables business, we'd love to hear from you. Apply now or get in touch for a confidential conversation. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Location: Newcastle Emtec Building Services North is strengthening its delivery leadership team as we mobilise new projects and build on a strong, secured pipeline of work across the region. As part of this continued growth, were looking for an experienced Electrical Project Manager to join us in Newcastle. This is a key leadership role where youll take full ownership of electrical projects from pre-construction through to handover. You'll be leading site teams, developing strong client relationships, and playing an active role in shaping our expanding presence in the North. Emtec Building Services is a leading M&E contractor delivering end-to-end mechanical and electrical solutions across commercial, industrial, and public sector projects, from early design and pre-construction through to installation, commissioning, and ongoing support. The Role As Electrical Project Manager, youll be responsible for the safe, efficient, and successful delivery of Electrical packages across a range of commercial construction projects, while supporting the development of your teams and identifying opportunities to grow the business. What Youll Be Doing: Leading site and project teams, ensuring compliance with Health & Safety, environmental, and quality standards. Managing project budgets, reporting, and ensuring projects are delivered on time and within scope. Overseeing variations and tendering additional works where required. Providing technical support to clients and site teams throughout the project lifecycle. Mentoring and developing your team, driving performance and encouraging professional growth. Building strong client relationships that lead to repeat business and long-term partnerships. Supporting commercial, design, and delivery coordination across contracts. What Youll Bring Youll be a qualified Electrical Engineer with Extensive experience in commercial and Industrial construction and fit out sectors. Proven M&E Project Management experience. Strong commercial, design, financial, and delivery knowledge across construction contracts. Confident leadership style with excellent communication and organisational skills. A proactive, client-focused approach with a genuine passion for quality and delivery excellence. SMSTS What's In It for You Attractive Salary Package: Based on skills and experience Generous Holidays: 33 days of holiday (inclusive of public holidays), increasing with length of service. Holiday Purchase/Sell Scheme: Additional flexibility to suit your needs. Contributory Pension Scheme: Secure your future with our contributory pension plan. Life Assurance: Peace of mind for you and your family. Development Opportunities: Excellent training and support for career growth. Wellness Support: Access to our Employee Assistance Programme and wellness portal. Exclusive Discounts: Benefit from our Employee Discounts Platform. Convenience: Free parking at our offices and a cycle scheme. In return, youll become part of a dedicated and passionate team that values and rewards commitment and success. If this feels like the right opportunity for you, wed love to hear from you. Emtec Group is proud to be an equal opportunities Employer. We are committed to fostering a workplace that is inclusive, free from discrimination and empowers everyone to bring their whole self to work, reaching their full potential. At Emtec, we understand that a diverse team is key to our growth and success. We hire exceptional people from all backgrounds, not just because its the right thing to do, but because it strengthens our company. TPBN1_UKTJ

AWD online is seeking an experienced Installation Site Manager in South East London. In this role, you'll manage installation projects, ensuring high standards of safety and quality while leading a diverse team.

The objective of this role as Installations Manager is to manage the smooth running of the fitting and Installations department with responsibility for a small team of fitters, and be first point of contact for ad‑hoc sub‑contractors. This is perfect for someone who is experienced with sign and

Axon Moore is seeking Solar Installation Project Managers to lead the delivery of commercial solar PV projects across the UK.

Transfer ownership of installation projects from account manager for service delivery. In‑depth knowledge of Delta’s product range, technologies, applications and installation. Oversee planning, execution, and safety of product and system installations, ensuring projects are completed on time, w

We have a fantastic new job opportunity for an Installation Site Manager with hands-on experience planning and delivering site installations across joinery, metalwork, LED lighting, shopfitting and general building projects. As the Installation Site Manager you will play a key role within the manage

Project Manager – Fire Alarm System Installation. Due to continued growth and market development, we are seeking a Project Manager with experience in the fire and security industry to join our team.

If you’ve also worked in the following roles, we’d also like to hear from you: Site Installation Manager, Site Supervisor, Fabrication Installation Manager, Fit Out Site Manager, Workshop Installation Manager, Shopfitting Manager, Installations Manager. We have a fantastic new job opportunity fo

Kone México is seeking a Construction Manager to oversee project delivery within the Lifts Installation team in Gateshead, UK. The role involves managing project scope, budget, customer communications, and leading the installation team including subcontractors.

AWD online seeks an experienced Installation Site Manager in South East London. The successful candidate will oversee site installations for diverse projects including joinery and LED lighting, ensuring high standards of quality and safety.

Deta Electrical Company Limited, based in Luton, is seeking a highly driven Product Manager to oversee the Cable Management and Installation Materials categories.

Reporting directly to the Director of Installations, the successful candidate will play a key role in ensuring high-quality bathroom installations are delivered efficiently and to the highest standards. Previous experience in an Installation Manager role within bathrooms, kitchens, or the wider cons

Thanks to a combined wealth of knowledge and experience between our directors, Global have become industry experts in the design, installation, commissioning and maintenance of fire safety, fire suppression and security systems. Project Manager with fire and security industry experience.

An exciting opportunity has arisen for a highly driven product manager to join a market leading and fast growing manufacturer and distributor of high quality wiring, lighting, cable management and electrical installation accessories supplied through the UK electrical wholesale and retail/DIY channel

Project Manager – Fire Alarm System Installation. Due to continued growth and market development, we are now seeking to appoint a Project Manager with fire and security industry experience to be field based in the London area or commutable to London. With a combined wealth of knowledge and experie