Trabajos junior engineer en SouthamptonCrear alertas

Job Description: Salary Ranges Engineer: £38k - £53k Senior: £45k - £61k Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Where this vacancy is being recruited across more than one grade, the successful candidate will be appointed to a specific assessed grade, and the applicable salary range will be that associated with the grade of appointment. Leonardo offers an additional allowances for some roles – for more information please contact _ Your Impact: This FPGA Firmware Engineer vacancy presents an exciting opportunity for an ambitious individual to develop their skills and knowledge within a thriving electronics organisation. In this broad VHDL firmware engineering role, you will work across a range of projects throughout various stages of the product lifecycle from initial concept development through to early life production. You will work with some of the latest high-speed FPGA’s and System-on-Chips (SoC’s) to help shape our future products. The role shall be based in either Southampton or Bristol with a primary focus on the design and development of embedded VHDL firmware for complex aircraft sensor and communication systems. You will be part of the Leonardo Airborne Communications product development group within the Integrated Sensing & Protection line of business, interacting with partner organisations, sub-contractors and potential customers. What you will do: • Firmware requirements capture and management., • FPGA design and analysis., • Production of documentation for other engineers and evidence for design reviews., • Development of FPGA test and FPGA integration plans., • Perform system integration work with PCB designers and embedded software engineers., • Support all firmware designs through the company firmware process – training will be given., • Modification of existing firmware designs and test benches. What you’ll bring: • Experience using FPGA technologies especially from either Xilinx, Microsemi (Actel) or Lattice and their tools., • Advanced verification techniques using either VHDL or System Verilog / UVM., • Specifying complex timing and area constraints for efficient FPGA place and route., • Ability to analyse system level requirements and derive detailed Firmware requirements., • A methodical approach to the full firmware design lifecycle, working to a structured firmware process such as RTCA DO-254 or similar., • Experience of working on safety related firmware to IEC 61508 would be advantageous., • De-bugging firmware designs and supporting verification and integration at hardware and system level alongside Software and Hardware Engineers., • Making technical decisions and mitigating technical risk for Firmware design activities., • Ability to communicate effectively across different disciplines both verbally and in written form., • Familiarity with Siemens EDA FPGA development tools including HDL Designer and ModelSim / Questa is an advantage. It would be nice if you had: • Awareness of Safety, Security and other legislative constraints, • Engineering experience with radio-based communication systems., • Experience of mentoring more junior members of the team. Security Clearance: This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: _ Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Southampton Additional Locations: GB - Bristol - Coldharbour Lane Contract Type: Permanent Hybrid Working: Hybrid

This is a fantastic opportunity for a Junior Analog Design Engineer to join a world-class IC Design team based in Southampton.The right candidate could be a recent graduate, or, ideally, have at least a year working in industry.Please note candidates must be eligible for UK security clearance for th

Deploy Recruitment Group is seeking an experienced Senior Primary Design Engineer to lead high-quality primary engineering designs for HV substations and power infrastructure projects, mentoring junior engineers and coordinating with project managers and clients. The role offers hybrid or remote work, exposure to UK and international standards, and the opportunity to contribute to major energy infrastructure while developing technical leadership within a FTSE 250 environment. #J-18808-Ljbffr

Avanti Recruitment Limited is helping a growing UK engineering business recruit a Senior FPGA Engineer to join the Southampton team. The role covers the full FPGA lifecycle, including design, verification, and integration for high-speed data and video/image processing systems. The successful candidate will work closely with embedded software and electronics engineers, take ownership of technical work, and mentor junior staff in a defence/mission-critical environment. #J-18808-Ljbffr

TieTalent — Senior Software Engineer — Southampton, England, United Kingdom This role emphasizes embedded development and offers opportunities to work on cutting-edge technology addressing real-world challenges in sectors including customs, border protection, law enforcement, military, emergency services, and first responders. • Leading the development of complex features and projects, • Collaborating with stakeholders and customers to maintain and develop software, • Assisting the software engineering manager in requirements management, estimation, and planning, • Devising innovative solutions to improve software processes and quality, • Integrating software with hardware to deliver complete systems, • Optimising application architectures for scalability and performance, • Monitoring system performance and troubleshooting to ensure high availability and reliability, • Designing, implementing, and maintaining CI/CD pipelines to automate software delivery processes, • Supervisory responsibilities: technical mentoring of junior engineers, • Sprint board management, • Significant experience with embedded C/C++ and Python, • Extensive expertise across Linux and Windows operating systems, • Strong understanding of electronics and systems design, • Hands-on experience with hardware-software integration, • Experience with internet, application layer, transport layer, and security protocols, • Proficiency with CI/CD tools such as Jenkins or GitLab CI/CD, • In-depth understanding of video and image processing, • Agile methodology and software development lifecycle knowledge, • Designing and implementing graphical user interfaces, • Appreciation for physics, particularly radiation-related topics, • Bachelor’s degree in computer science, electronics, or a related field, • Hands-on experience in software and firmware development, • Seniority level: Mid-Senior level, • Employment type: Full-time, • Job function: Engineering and Information Technology, • Industries: Technology, Information and Internet If you are passionate about technology and innovation, and have the skills and experience we are looking for, we would love to hear from you. Apply now to join our client’s dedicated and innovative team. #J-18808-Ljbffr

Our client is seeking a seasoned Senior Mechanical Engineer to join their globally distributed team, working entirely remotely. This role is critical for leading the design, development, and implementation of complex mechanical systems that drive our core business objectives. You will be responsible for innovative problem-solving, technical mentorship, and ensuring the highest standards of engineering excellence. The ideal candidate is a self-starter, adept at managing their workload independently, and excels in communicating and collaborating effectively within a virtual environment. Join us to make a significant impact on impactful projects from anywhere, contributing to a culture that values innovation, autonomy, and remote collaboration. • Lead the design and development of sophisticated mechanical systems and components, ensuring performance, reliability, and cost-effectiveness., • Conduct advanced engineering analyses, including FEA and thermal analysis , to validate and optimize designs., • Collaborate with cross-functional teams (electrical, software, product management) in a virtual setting to define and meet project requirements., • Develop and maintain detailed design documentation, including specifications, drawings, and BOMs., • Oversee prototype development, testing, and validation, troubleshooting complex issues., • Mentor junior engineers, providing technical guidance and fostering best practices in remote collaboration., • Master's degree in Mechanical Engineering or a related technical discipline., • 8+ years of comprehensive experience in mechanical design and product development., • Expertise in CAD software (e.g., SolidWorks, CATIA) and simulation tools (FEA, CFD)., • Strong understanding of material science, manufacturing processes, and DFM/DFA principles., • Proven leadership skills and experience working effectively in a remote, distributed team environment., • Excellent analytical, problem-solving, and communication skills., • Highly competitive executive-level salary and comprehensive benefits., • Full remote work flexibility with a dedicated home office allowance., • Opportunities for significant professional growth and leadership development., • Exposure to cutting-edge technologies and challenging global projects., • A supportive and innovative company culture that embraces remote work. #J-18808-Ljbffr

Our client, operating within the marine sector, is currently seeking a Senior Mechanical Design Engineer to join their team. The successful candidate will have expertise in mechanical design, specifically within Marine Engineering. • Developing and designing mechanical systems for marine projects, • Creating detailed mechanical drawings and specifications, • Reviewing and validating designs to ensure compliance with industry standards, • Collaborating with other engineering disciplines to integrate system designs, • Conducting technical analysis and simulations to optimise designs, • Providing technical leadership and guidance to junior engineers, • Managing project timelines and deliverables to meet client requirements, • Ensuring the quality and integrity of mechanical designs through rigorous testing and inspections, • Experience in mechanical design engineering within the marine sector, • Strong understanding of marine engineering principles and practices, • Ability to develop and interpret technical drawings and specifications, • Excellent problem-solving and analytical skills, • Strong communication and teamwork abilities, • Engineering degree or equivalent qualification in a related field, • Opportunity to work on innovative and challenging marine projects, • Professional development and training opportunities, • Supportive and collaborative work environment, • Competitive benefits package If you are a Senior Mechanical Design Engineer with a passion for marine engineering, we encourage you to seize this opportunity. #J-18808-Ljbffr

We are looking for a Lead Supportability Engineer with strong industry experience not necessarily within the domain of Supportability, but those with backgrounds in Electronics/Hardware or Systems would also be suitable. We are looking for a Lead Supportability Engineer with strong industry experience not necessarily within the domain of Supportability, but those with backgrounds in Electronics/Hardware or Systems would also be suitable. The Supportability department has a unique position within our business as it is involved in the full lifecycle of a programme, from Bid, Development, Production then Customer Support and eventually disposal. We draw engineers from many different disciplines such as Electrical and Electronic, Mechanical, and System Engineering to enhance the Supportability department. We expect our people to create strong working relationships with cross-department colleagues in Systems, Electronics, Mechanical, Software, Test Equipment, Quality and Industrial to identify problems on complex systems before they reach Production or the Customer. As a department, we have a strong focus on continuous improvement of our procedures and processes but also of our department itself and want anyone who joins to be part of that journey. This might include using your engineering talent to grow and develop the Supportability community and skill base through the mentoring, coaching and development of more junior members of the team or contributing to best practices to help drive out the cost and reputational consequence of failure. We can also help you develop your skills and offer great opportunities to develop, grow and progress in your career! As a Lead Engineer, you will be leading a team of Supportability Engineers who deliver a wide range of Supportability Engineering work packages. You will work closely with Project Managers, Operations and Project Engineering Managers from other functions within the Integrated Project Teams (IPT) to advise on Supportability requirements, provide analysis and offer guidance. You will support and develop your team to ensure the broad range of Supportability analysis and deliverables can be completed, including: • Reliability Analysis: Working with other disciplines, your team will develop component to system level reliability models, including the use of Reliability Block Diagram Methodology on electronic, power, RF, digital and mechanical systems to provide guidance to the design engineers., • Reliability Testing and Simulation (e.g. FEA, RGT, HALT, ESS): The Supportability team will create models to discover areas of concern and develop Reliability Growth plans and procedures to identify failure modes and propose Corrective action., • Maintainability Analysis: Your team will carry out modular to system level analysis that addresses Human Factors and Maintenance Task Analysis to identify Reliability Centred Maintenance and Scheduled Maintenance tasks , ensuring that the equipment meets it operational capability, • Testability Analysis: Your team will complete a FMECA analysis, working closely with Hardware engineers to establish the effectivity of fault detection and isolation of the equipment BIT and feed back omissions and improvements into the design process, • Product Safety: As part of a broader safety team, including Design Integrity and Systems Engineering, your team will carry out analysis of the design, its assembly, test and operation to complete an Intrinsic Product Safety hazard and Environment Impact Analysis, providing input to the Hazard Log, Safety Case and Fault Tree Analysis., • Production Support: Your team will be involved in analysis of production and in-service failure data (FRACAS), to identify and prioritise pattern faults. SE will work within a multi-discipline IPT team to identify Root Cause and Corrective action., • Support Strategy: You will help to develop a product’s In-Service Support strategy, using through-life cost modelling and many aspects of the above analysis. Ensure milestones are completed to schedule and budget while ensuring technical quality. Provide expert input into Life Cycle Management reviews. Work alongside the IPT to reduce cost and risk across the lifecycle and support any continuous improvement activities.Work with Supportability Head of Department to seek improvements to our methods and processes and topromote and implement improved ways of working within the Supportability department. Schedule, manage and Chair Sector Project Cost Review Boards (PCRBs). #J-18808-Ljbffr

Department: Hardware Location: Southampton, UK Our RTL team delivers efficient ASIC and FPGA implementations of advanced communications algorithms, working across IP development, integration and verification. To support this work, we are looking for a Senior Verification Engineer to support the complete UVM verification of Accelercomm IP. Responsible for verification of RTL implementations for advanced wireless communications IP and modem subsystems, ensuring designs meet functional, performance and quality requirements prior to FPGA deployment and ASIC tape-out. • Develop verification plans from design and architecture specifications., • Create and maintain SystemVerilog/UVM verification environments., • Develop testbenches, assertions, scoreboards and coverage models., • Execute directed and constrained-random verification., • Analyse coverage and debug RTL and verification issues., • Support subsystem and system-level integration activities., • Contribute to automation, regression and CI workflows., • Participate in design reviews and verification sign-off., • Mentor and support junior colleagues, • Degree in Electronic Engineering, Computer Engineering or a related discipline., • At least 3 years experience verifying digital ASIC and/or FPGA designs., • Strong SystemVerilog and UVM skills., • Understanding of RTL design principles and hardware implementation., • Experience with coverage-driven and assertion-based verification., • Linux proficiency and scripting skills (Python, Tcl or Bash)., • Strong analytical, debugging and problem-solving skills., • Experience using AI to accelerate verification without sacrificing quality, • Ability to work across multiple teams, • Experience in 4G/5G, NTN, satellite communications or DSP systems., • Knowledge of modem architectures and Layer 1 processing., • Experience with Formal Verification, FPGA prototyping and CI environments., • Familiarity with MATLAB or equivalent modelling tools., • We pay competitive salaries which depend on skills and experience., • We offer a bonus scheme which pays up to 20% of salary annually, depending on performance., • This is in addition to EMI share options, issued periodically., • We offer a range of good quality company benefits including pension and private health insurance., • Our offices on Southampton Science Park provide a great working environment, with a coffee shop, bike storage, showers, plenty of free parking and EV charging points., • We operate flexible working hours and offer hybrid working. #J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features. This range is provided by Spectrum IT Recruitment. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Direct message the job poster from Spectrum IT Recruitment Full Stack Developer (Junior to Mid-Level) - Fully Remote | SaaS Web Analytics Are you a passionate developer eager to make an impact in a fast-paced SaaS environment? This is a brilliant opportunity to join an award-winning tech company delivering innovative web analytics solutions to a global B2B audience. You'll be working with a high-performing team that values clean code, modern development practices, and a supportive culture. • AWS cloud environment with Redis, SQL Server, Snowflake, • CI/CD deployment, agile processes, SOLID principles, automated testing, • Strong emphasis on clean, maintainable code and security best practices Your Role • Turn user stories into robust features within a collaborative scrum team, • Contribute to product design and architecture decisions, • Maintain and support production systems, • Uphold high standards in testing, code quality, and secure development What You'll Bring • 2+ years' experience in software development, • Understanding of SOLID principles and full stack development practices, • Experience working in CI/CD environments with automated testing, • Passion for learning, problem-solving, and building reliable, scalable systems, • A degree in Computer Science or equivalent experience What's on Offer • Fully remote working (with hybrid options available if desired), • A fantastic culture built on collaboration, growth, and giving back, • Make a real difference in a company that values your input and ideas, • Work with modern tech in a team that ships code daily, • Associate, • Full-time, • Information Technology, • Software Development Referrals increase your chances of interviewing at Spectrum IT Recruitment by 2x Get notified about new Full Stack Engineer jobs in Winchester, England, United Kingdom. Winchester, England, United Kingdom 1 week ago Chilworth, England, United Kingdom 5 months ago Southampton, England, United Kingdom 2 weeks ago City Of Southampton, England, United Kingdom £55,000.00-£80,000.00 6 days ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr

Play a major role within Future Combat Air (FCA) and help shape the future of one of the world's most ambitious defence programmes. Play a major role within Future Combat Air (FCA) and help shape the future of one of the world's most ambitious defence programmes. Our Design Integrity function is looking for a Airworthiness Approvals Lead to support the Future Combat Air (FCA) line of business (LOB). Reporting to the GCAP Chief Airworthiness Engineer, you will be responsible for sustaining our existing DAOS approval and leading the development of a new organisational approval framework that will support the future needs of the GCAP programme. Please note that this role is working on a hybrid basis and can be based at any of our following sites; Newcastle, Edinburgh, Luton, Bristol, Lincoln, Basildon or Southampton. In addition to this, you will be required to travel to our partner sites within the UK and overseas. • Represent Leonardo in GCAP forums where Design Organisation Approvals are being investigated and progressed, as an Airworthiness Design Organisation SME., • Maintain an up-to-date knowledge of the UK Military and European Defence Agency EMAR Part 21 Regulatory Environment and develop an understanding of the GCAP partner nation's Regulatory Environments., • Participate with the GCAP Chief Airworthiness Engineer alongside our international partners within the Domain Engineering and Technical Office (DETO) in the running of the Office of Airworthiness & Qualification., • Work with the Design Integrity Chief Engineers; and with the Safety and Airworthiness Security leads in each Leonardo Line of Business to ensure a consistent approach is taken., • Maintain the extant Leonardo Electronics UK Design Organisation Approvals Scheme (DAOS) Exposition, assessing proposed changes to the MAA’s Regulatory Publications for their impact upon the DAOS Exposition and Company processes and procedures., • Contribute within appropriate Company and G2E Domain working groups to monitor proposed changes to the Regulatory Environment, assess their impact and advise as to appropriate response., • Working alongside GCAP Edgewing and G2E partners to develop an understanding of and development of a single tri-national approach towards delivery of airworthy systems to support the GCAP., • A background in aerospace engineering specialising in airworthiness certification, with an associated master’s level qualification., • Proven hands‑on experience working with UK Military Aviation Authority or civil equivalents (EASA, CAA, etc) in the airworthiness certification of air systems., • Hands on experience with the development and maintenance of Design Organisation Approval Expositions., • A solid working knowledge of airworthiness regulations e.g. UK MAA MRP, EASA CS-25, Def Stan 00-970, EDA EMAR Part 21, MIL-HDBK-516, etc., • Experience supporting design reviews, audits, and regulatory compliance meetings., • Hands on experience interpreting regulator notices of proposed amendments and notices of authorised amendments for their impact on the DAOS Exposition and associated processes., • Excellent technical writing and reviewing skills for safety reports, compliance documentation, and certification submissions., • Knowledge of software and complex electronic hardware certification standards (DO-178C, DO-254, DO-297) and an awareness of airworthiness safety assessment standard e.g. ARP4754B, ARP4761A, Def Stan 00-56, Def Stan 00-55, and associated methodologies e.g. FHA, PSSA, SSA, FMEA, FTA, etc., • Experience in the certification of novel technologies e.g. additive manufacturing., • Working within multi-national teams., • Experience mentoring junior engineers or contributing to capability development., • Experience in the management of Maintenance and Production organisation schemes and associated expositions., • Experience in Configuration Management. This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part-time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. GB - Luton - Cap. Green 300 GB - Basildon, GB - Bristol - Coldharbour Lane, GB - Edinburgh, GB - Lincoln, GB - Newcastle, GB - Southampton Permanent Hybrid #J-18808-Ljbffr

We're looking for a Senior Verification Engineer to join a specialist RTL team developing advanced communications technology across ASIC and FPGA platforms. You'll take responsibility for the UVM verification of complex wireless communications IP and modem subsystems, ensuring designs meet functional, performance, and quality requirements ahead of FPGA deployment and ASIC tape-out. This is an opportunity to work on technically challenging projects covering IP development, integration, and verification, while also supporting and mentoring more junior engineers. • Degree in Electronic Engineering, Computer Engineering, or a related discipline., • At least 3 years' experience verifying digital ASIC and/or FPGA designs., • Strong SystemVerilog and UVM experience., • Good understanding of RTL design principles and hardware implementation., • Experience with coverage-driven and assertion-based verification., • Linux proficiency with Python, Tcl or Bash scripting skills., • Strong analytical, debugging and problem-solving skills., • Experience using AI to accelerate verification while maintaining quality., • Ability to collaborate effectively across multiple engineering teams., • Develop verification plans from design and architecture specifications., • Create and maintain SystemVerilog/UVM verification environments., • Develop testbenches, assertions, scoreboards and coverage models., • Carry out directed and constrained-random verification., • Analyse coverage and debug RTL and verification issues., • Support subsystem and system-level integration., • Contribute to automation, regression testing and CI workflows., • Participate in design reviews and verification sign-off., • Mentor and support junior engineers., • 4G/5G, NTN, satellite communications or DSP systems., • Modem architectures and Layer 1 processing., • Formal Verification, FPGA prototyping and CI environments., • MATLAB or equivalent modelling tools. #J-18808-Ljbffr

Leonardo has an exciting opportunity for a Lead Systems Engineer/Design Authority (DA) to join its NATO JEWCS Integrated Project Team (IPT), within the CEMA and IC Sector based across the south of the UK. We are producing the next generation Electronic Warfare (EW) Training System assets covering Land, Sea and Air together with an IT infrastructure to enable effective planning, programming and review for NATO exercises. As Lead Systems Engineer and Design Authority, you will be responsible for providing the technical oversight and expertise at all levels of the overall system solution, working with both internal and supplier design teams to ensure that the architecture of the overall system solution is developed and delivered to meet the Customer and business requirements. Working Across The Whole Of The Systems Engineering Lifecycle, As Part Of a Multi-disciplined Team, The Successful Candidate Will Seek Advice From SMEs To Review And Advise On The Creation And Verification Of Subsystem Technical Solutions Lead The Directly Supporting The Project Chief Engineer In Ensuring The System And Sub System Designs Are • fit for purpose and due consideration has been made for the integrity of the design, • compliant with customer requirements and required standard, • safety of the overall proposed architecture is maintained and assessed As a result, strong technical, delivery, and people leadership skills and abilities are essential in this role, particularly the ability to discuss and resolve complex technical problems in the EW domain. This role will see the successful candidate join the quickly expanding engineering team within the CEMA and IC sector and take on a key role in shaping the future of the NATO JEWCS deployed solution combining use of COTS with the latest technologies and ensuring that they meet the needs of the customer. • Work closely with the Project Chief Engineer to identify and resolve technical issues across the whole system and subsystems and to ensure the integrity of the solution., • Deputise for the Project Chief Engineer within the project., • Lead the architecture team to develop and document the architecture thought the project lifecycle., • Influence all levels of requirements to enable design and development decisions and trade-offs to be made., • Provide direction, control, evaluation and recommendations relating to technical risks and opportunities., • Support test planning and requirements verification to achieve certification and delivery for the overall system., • Working with and influencing key project stakeholders including customer and end users., • Present Architecture material at Design reviews internally and externally for the overall system., • Act as a technical interface between the end customer and the Leonardo Engineering team., • Actively support knowledge sharing and exploitation of best practice., • Support the guidance and development of junior Systems Engineers within the Engineering team., • Contribute to the successful achievement of engineering milestones as an integrated part of the Prime team., • Support and advise sub-system design teams through their design reviews., • Travel within the UK and abroad to meet with our customers and industry partners., • A degree (or equivalent experience) in a STEM subject and strong numerical, analytical and design skills, with the ability to apply these to real world problems., • Strong understanding of system and project lifecycles as applicable to delivery of sub-systems, technical and commercial baselines, and change control., • Strong understanding of Systems Architecture activities as part of the Systems Lifecycle., • Self‑motivated with a strong aptitude for problem‑solving and decision‑making within projects involving design complexity and uncertainty., • Strong experience of influencing system design and integration of a major system., • Strong experience in stakeholder management within organisations and with customers (internal or external) in a high‑pressure environment, pulling in technical expertise when and where appropriate., • Experience of successfully passing Design Reviews and implementing potentially complex remedial actions with sub‑contract equipment suppliers and Prime integration teams., • Knowledge of military EW/radar passive and active RF., • Strong understanding of systems integration and progressive assurance., • Experience of making design decisions by trading‑off alternate solution based on functionality, performance and cost., • Chartered engineer / member of the Institute of Engineering and Technology (IET) This role is subject to pre‑employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company‑funded benefits package that supports your wellbeing, career development, and work‑–life balance. Whether you’re looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi‑days each year., • Secure your Future: Benefit from our award‑winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee‑led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. Leonardo UK operates a grade‑based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. GB - Southampton GB - Basildon Permanent Hybrid #J-18808-Ljbffr

Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. We are looking for a Lead Software Engineer to join our Saab Seaeye Underwater Robotics Business in Fareham. The role will be lead design and implement software solutions for underwater robotics applications in line with the company's business needs through innovation, creativity and professionalism. Able to demonstrate expertise and experience in software used on industrial/vehicle/vessel systems. Reporting to the Software Manager the Software Lead role involves taking responsibility for the delivery of projects and leading multidisciplinary teams to deliver technically complex software projects for subsea vehicles and associated robotic functions. Typically requiring input from several differing software and engineering disciplines and supporting functions the software lead is able to bind these inputs together to successfully deliver the software content for Saab products. Required skills: • A minimum of 7 years' experience as a Senior Engineer., • A Degree in a relevant Engineering Discipline., • Broad understanding of software from embedded though to applications, • Leading multi-disciplined teams of software engineers, • Able to develop a software architecture for complex systems from scratch, • Sound understanding of modern software methods and technologies, • Able to maintain a system level approach and not get lost in the detail, • Able to develop system level requirements and derive lower level requirements to achieve these, • Sound understanding of safety concepts and design, • Able to interface directly with customers, • Able to act as a technical authority, • Able to communicate technical concepts to non-technical stakeholders, • Able to estimate work content and duration, • Able to plan work loading for teams ensuring no team member is overloaded, • Able to develop and instigate processes to ensure industry best practice is achieved, • Able to ensure appropriate levels of Software Quality are achieved for projects, • Able to mentor and develop junior engineers, • Ability to delegate tasks, • Able to manage resources and budgets, • Practical understanding of standards and application of standards, • Appreciation of Cyber Security and the impacts on design In addition, you will be Able to demonstrate software skills in some of the following technologies on both Windows and Linux: • C++, • Javascript, • Python, • XML, • JSON, • HTML, • CSS, • Web backend servers (Angular, Django, NodeJS, React, Apache or similar), • Web Sockets, • Docker, • TCP-IP / UDP, • SQL or other databases, • Dev tools (Wireshark, system log interrogation etc..), • Databases, • Cyber Security Desirable: • Exposure to IP video and video routing, • Familiarity in design and testing of control software, • Familiarity with Systems serving Real Time Information via Web Sockets, • Use of DDS and interfacing with it, • Message Queues (Active MQ/Rabbit MQ/ZeroMQ), • GUI Development experience (.Net GUI framework, Qt 6.2 or previous versions), • Developing and debugging software for application software in Visual studio (2013, 2017, 2022), • Customer facing API's using web technologies By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. #J-18808-Ljbffr

Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. This role is part of our Sensor Systems Radar Business in Fareham. At Saab, we are constantly looking ahead and pushing boundaries on whats considered technically possible. Saab is expanding in the UK and we are now seeking talented and highly motivated engineers to support our radar and sensors growth activities at our Fareham offices. We are recruiting for a Senior Systems Engineer specialising in Positioning, Navigation, and Timing (PNT) and Distributed Sensing. The successful candidate is expected to fulfil the requirements of a Saab Specialist, and act as a technical leader to: drive development, lead innovation and anticipate future trends, identify opportunities, mitigate risks, and advocate change to maintain competitiveness. Also lead competence development, and formulate and maintain Specialist Work Programmes. As a Senior System Engineer, you will be responsible for enhancing our current products, developing improvements and investigating new areas for product growth, as well as supporting the Engineering Team with various Systems Engineering-focussed activities. • System Architecture & Design. Lead the architectural design of PNT solutions, integrating Global Navigation Satellite System (GNSS), Inertial Navigation Systems, and alternative PNT (e.g., vision-based, RF-based, or celestial navigation). Architect distributed sensing networks, defining how data is collected, synchronized, and fused across multiple remote nodes to create a unified operational picture. Define system-level requirements, interface control documents, and performance specifications for timing accuracy and positioning precision. Perform trade studies to optimise the balance between size, weight, power, and cost and system performance., • PNT & Synchronization Expertise. Implement and optimise high-precision timing distribution protocols (e.g., PTP/IEEE 1588, NTP, or White Rabbit). Develop strategies for PNT resilience, including mitigation of jamming, spoofing, and GNSS-denied environment operations. Lead the selection and integration of atomic clocks, quantum oscillators, and high-grade IMUs., • Distributed Sensing & Data Fusion. Design algorithms and architectures for distributed beamforming, phased arrays, or coordinated sensor fusion. Manage the challenges of network latency, jitter and asynchronous data arrival in distributed sensing environments. Collaborate with software teams to implement edge-processing capabilities to reduce data backhaul from sensing nodes., • Integration, Test & Evaluation. Develop comprehensive verification and validation (V&V) plans to prove timing and positioning accuracy. Design and execute complex test campaigns using hardware-in-the-loop and software-in-the-loop simulations. Lead the analysis of telemetry and test data to identify systemic errors and drive corrective design changes., • Leadership & Mentorship. Serve as the Subject Matter Expert for PNT and Distributed Sensing across cross-functional teams (Radio Frequency, Software, Mechanical). Mentor junior engineers in systems engineering best practices and specialized domain knowledge. Present technical roadmaps and progress reports to senior leadership and external., • Master's or PhD in a related field., • A minimum of five to ten years industrial radar, communications or electronic warfare systems experience., • A minimum of seven years of experience in systems engineering, specifically focusing on PNT and/or distributed sensor systems., • Proven track record with systems utilising GNSS (GPS, Galileo, GLONASS) and Inertial Navigation (Kalman Filtering, sensor fusion)., • Experience with distributed aperture systems, sensor networks, or Multiple-Input Multiple-Output radar architectures., • Proficiency with MATLAB/ Simulink for modelling and simulation., • Experience with Model-Based Systems Engineering tools and requirements management tools., • Familiar with the principles of ISO 15288:2023., • During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship., • RF Knowledge: Strong understanding of RF front-end design, antenna theory and signal propagation., • Programming. Proficiency in C++, Python, or Rust for prototyping algorithms., • Security. Experience with encrypted PNT signals or secure timing distribution. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. #J-18808-Ljbffr

Leonardo has an exciting opportunity for a Lead Systems Engineer/Design Authority (DA) to join its NATO JEWCS Integrated Project Team (IPT), within the CEMA and ICS Sector based across the south of the UK. We are producing the next generation Electronic Warfare (EW) Training System assets covering Land, Sea and Air together with an IT infrastructure to enable effective planning, programming and review for NATO exercises. As Lead Systems Engineer and Design Authority, you will be responsible for providing the technical oversight and expertise at all levels of the overall system solution, working with both internal and supplier design teams to ensure that the architecture of the overall system solution is developed and delivered to meet the Customer and business requirements. Working across the whole of the systems engineering lifecycle, as part of a multi-disciplined team, the successful candidate will seek advice from SMEs to review and advise on the creation and verification of subsystem technical solutions lead the directly supporting the Project Chief Engineer in ensuring the system and sub system designs are: • fit for purpose and due consideration has been made for the integrity of the design, • compliant with customer requirements and required standard, • safety of the overall proposed architecture is maintained and assessed As a result, strong technical, delivery, and people leadership skills and abilities are essential in this role, particularly the ability to discuss and resolve complex technical problems in the EW domain. This role will see the successful candidate join the quickly expanding engineering team within the CEMA and ICS sector and take on a key role in shaping the future of the NATO JEWCS deployed solution combining use of COTS with the latest technologies and ensuring that they meet the needs of the customer. • Work closely with the Project Chief Engineer to identify and resolve technical issues across the whole system and subsystems and to ensure the integrity of the solution., • Deputise for the Project Chief Engineer within the project., • Lead the architecture team to develop and document the architecture thought the project lifecycle., • Influence all levels of requirements to enable design and development decisions and trade-offs to be made., • Provide direction, control, evaluation and recommendations relating to technical risks and opportunities., • Support test planning and requirements verification to achieve certification and delivery for the overall system., • Working with and influencing key project stakeholders including customer and end users., • Present Architecture material at Design reviews internally and externally for the overall system., • Act as a technical interface between the end customer and the Leonardo Engineering team., • Actively support knowledge sharing and exploitation of best practice., • Support the guidance and development of junior Systems Engineers within the Engineering team., • Contribute to the successful achievement of engineering milestones as an integrated part of the Prime team., • Support and advise sub-system design teams through their design reviews., • Travel within the UK and abroad to meet with our customers and industry partners. Required • A degree (or equivalent experience) in a STEM subject and strong numerical, analytical and design skills, with the ability to apply these to real world problems., • Strong understanding of system and project lifecycles as applicable to delivery of sub-systems, technical and commercial baselines, and change control., • Strong understanding of Systems Architecture activities as part of the Systems Lifecycle., • Self-motivated with a strong aptitude for problem-solving and decision-making within projects involving design complexity and uncertainty., • Strong experience of influencing system design and integration of a major system., • Strong experience in stakeholder management within organisations and with customers (internal or external) in a high-pressure environment, pulling in technical expertise when and where appropriate., • Experience of successfully passing Design Reviews and implementing potentially complex remedial actions with sub-contract equipment suppliers and Prime integration teams., • Knowledge of military EW/radar passive and active RF., • Strong understanding of systems integration and progressive assurance., • Experience of making design decisions by trading-off alternate solution based on functionality, performance and cost., • Chartered engineer / member of the Institute of Engineering and Technology (IET) This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: gb/en/security-and-vetting At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. • Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year., • Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution., • Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity)., • Rewarding Performance: All employees at management level and below are eligible for our bonus scheme., • Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning., • Refer a friend: Receive a financial reward through our referral programme., • Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more., • Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. GB - Southampton GB - Basildon Permanent Hybrid #J-18808-Ljbffr

Leonardo Worldwide Corporation is seeking a Principal / Lead Systems Engineer to support projects within the Cyber and Electro Magnetic Activities sectors. This role involves owning technical solutions and collaborating closely with stakeholders. The ideal candidate will have experience in military product development, particularly in IP networking and RF communications, with a proven ability to guide teams and mentor junior engineers. Flexible working and a comprehensive benefits package are offered. #J-18808-Ljbffr

We – the Energy Unit, specifically the Nuclear; Defence and Civil division are looking to recruit a Senior Safety Case Engineer to join our team. The role will cover a number of areas including nuclear power generation, the naval nuclear programme and decommissioning. This is an excellent opportunity to join a dynamic and growing team with plenty of opportunities for career progression and the chance to make an impact on the development of the Energy unit. • Safety Case Production (e.g. SJP, PCSR, PCmSR, PRS), • Modification/ Design Change Submissions (LC/AC 22), • Decommissioning, • Functional Safety Assessment, • Regulatory Interface, • ALARP Assessment, • Safety & Risk Assessment, • Deterministic Safety Assessment, • Probabilistic Safety Assessment, • Nuclear Safety Legislation, Regulation and Policy, • Engineering Substantiation, • HAZOP and other identification studies, • HAZAN, • Criticality, • Nuclear Fire, • Degree qualified in a Science, Technology or Engineering discipline, • Experience in the nuclear or defence industries (although applicants from other high‑hazard / regulated industries will be considered), • Chartered Engineer or working towards, • Ability to demonstrate successful delivery of nuclear safety deliverables and strategy on complex projects, • Willing to develop and mentor more junior members of staff, • Candidates must be eligible to apply for and obtain Security Clearance Offers for this role are conditional upon obtaining the appropriate level of Security Clearance. • Location(s): Glasgow, Bristol, Reading, Tadley, Altrincham, London, Southampton, • Contract Type: Permanent, • Work Pattern: Full Time, • Market: Energy, • Discipline: Energy, • Job Ref: 14727 #J-18808-Ljbffr

We're recruiting a Senior Site Engineer to support a major water‑treatment facility being delivered under AMP8. This is a technically involved environment with complex underground structures, extensive pipework, and strict quality and compliance requirements. It suits someone with strong civils and water‑sector experience who can take ownership of engineering control, mentor junior engineers, and maintain high standards across multiple work fronts. You'll be working on reinforced concrete structures, large‑diameter pipework installations, drainage networks, utilities diversions, chambers, culverts, and deep underground assets. The role requires confidence managing temporary works, sequencing, and buildability, along with rigorous documentation and coordination across design, commercial, and delivery teams. • Lead engineering control across RC structures, drainage, utilities, and underground works, • Deliver accurate setting‑out, surveying, and as‑built records across multiple packages, • Review drawings, specifications, and technical requirements, resolving clashes and buildability issues, • Manage ITPs, QA records, permits, and site documentation to water‑sector standards, • Coordinate with designers, temporary works, and subcontractors to maintain technical accuracy, • Mentor junior engineers and ensure consistent engineering standards across the team, • Support planning, sequencing, and interface management across civils and M&E elements, • Drive problem‑solving and practical solutions on complex pipework and underground structures, • Civil engineering degree or equivalent, • Strong experience as a Site Engineer or Senior Site Engineer on water‑sector projects (AMP frameworks, WTW/WTW upgrades, pipelines, utilities), • Excellent understanding of RC structures, drainage, utilities, pipework installation, and underground assets, • Confident working with temporary works, QA processes, and controlled environments, • Able to challenge design, propose practical solutions, and maintain high technical standards, • Comfortable leading engineering teams and managing subcontractor coordination This is an excellent opportunity on a long term project. Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. #J-18808-Ljbffr

Leonardo UK is seeking a Lead Supportability Engineer to lead a team delivering a wide range of analyses across the product lifecycle. You will collaborate with Project Managers, Operations and IPTs to advise on requirements and guide design decisions through reliability, maintainability and safety analyses. Join a role that develops junior engineers, drives continuous improvement, and offers hybrid working in a dynamic defence environment with opportunities to advance technical and leadership #J-18808-Ljbffr

Spectrum IT Recruitment is seeking a Senior Verification Engineer to join a specialist RTL team in the Southampton area. You will own UVM verification of complex wireless IP and modem subsystems, ensuring designs meet functional, performance and quality requirements ahead of FPGA deployment and ASIC tape-out. The role involves developing verification plans, building SV/UVM test environments, and mentoring junior engineers while contributing to CI workflows and integration effort across multiple #J-18808-Ljbffr

Join AtkinsRéalis, a world-leading design, engineering, and project delivery consultancy, as a Senior Quantity Surveyor in our Southampton Buildings & Places team. This is an exciting opportunity to work with a diverse portfolio of public and private sector clients, delivering projects across sectors such as residential and affordable housing, retirement living, education, healthcare, defence, commercial and industrial developments, and local government estates. As a trusted commercial advisor, you will lead the successful delivery of projects, build long-term client relationships, and collaborate with multidisciplinary teams to achieve outstanding outcomes. You will play a key role in managing project commercial performance, providing strategic cost advice, and supporting clients throughout the project lifecycle. Working within a supportive local team and a wider UK network of industry specialists, you will gain exposure to high-profile and complex developments while contributing to the growth of our Quantity Surveying service. This role offers an excellent opportunity for a client-focused professional looking to advance their career, broaden their sector experience, and make a lasting impact on projects that shape communities and create long-term value. Your role: Lead commercial delivery of projects, achieving agreed cost, quality, and programme targets. Prepare and manage cost plans, budgets, forecasts, and contract administration activities across a variety of Clients. Maintain project profitability, financial control, and accurate forecasting. Responsible for governance, quality standards, and client KPIs. Mentor junior team members and support knowledge sharing and team development. Including supporting with CDP events. Support client account growth and identify new business opportunities. Build strong relationships with clients, stakeholders, and project teams. Contribute to bids, proposals, and business development opportunities. About you: Chartered Quantity Surveyor (MRICS) or equivalent. Proven experience in quantity surveying and cost management across property and development projects. Strong NEC and/ or JCT contract knowledge. Desirable to have experience as and Employers Agent. Strong client and stakeholder management skills, with experience delivering complex projects. Excellent communication and relationship-building abilities. Ability to lead teams, manage priorities, and drive successful project outcomes. Commercially aware, proactive, and solution-focused approach. Explore the rewards and benefits that help you thrive - at every stage of your life and your career. Enjoy competitive salaries, employee rewards and a brilliant range of benefits you can tailor to suit your own health, wellbeing, financial and lifestyle choices. Make the most of a myriad of opportunities for training and professional development to grow your skills and expertise. And combine our hybrid working culture and flexible holiday allowances to balance a great job and fulfilling personal life. Be rewarded. Find out more. We’re AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world’s infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We’re committed to leading our clients across our various end markets to engineer a better future for our planet and its people. Find out more. This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to creating a culture where everyone feels that they belong - a place where we can all be ourselves, thrive and develop to be the best we can be. So, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee resource groups to support all employees. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability. As a Disability Confident Leader, we are committed to offering an interview to all applicants who have a disability and meet the essential criteria. If you would like to be considered under this commitment, please let us know at the application stage. Worker Type Employee Job Type Regular At AtkinsRéalis, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. Created by the integration of long-standing organizations dating back to 1911, AtkinsRéalis is a world-class engineering services and nuclear company dedicated to engineering a better future for our planet and its people. We create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems. We deploy global capabilities locally to our clients and deliver unique end-to-end services across the whole life cycle of an asset including consulting, advisory & environmental services, intelligent networks & cybersecurity, design & engineering, procurement, project & construction management, operations & maintenance, decommissioning and capital. The breadth and depth of our capabilities are delivered to clients in strategic sectors such as Engineering Services, Nuclear and Capital. News and information are available at Atkinsrealis or follow us on LinkedIn. #J-18808-Ljbffr

We are seeking an experienced Senior Primary Design Engineer to lead and deliver high-quality primary engineering designs for HV substations and power infrastructure projects. Working for the specialist power engineering arm of a FTSE 250 company, you will play a key role in technical delivery, mentoring junior engineers, and working closely with project managers, clients, and multidisciplinary teams. This role is available on a hybrid or remote basis, offering flexibility while remaining closely connected to project teams and clients. • Lead the design and development of primary engineering solutions for HV substations and associated infrastructure, • Produce and review primary design deliverables including layouts, GA drawings, equipment specifications, and technical reports, • Ensure designs comply with relevant standards, client specifications, and safety requirements, • Provide technical guidance, checking, and mentoring to junior engineers, • Interface with clients, contractors, and internal stakeholders throughout the project lifecycle, • Support project planning, cost estimates, and risk assessment, • Contribute to continuous improvement of design processes and standards, • Degree-qualified in Electrical Engineering or a related discipline, • Significant experience in primary design within HV substations (e.g. 33kV-400kV), • Strong knowledge of UK / international standards and utility requirements, • Proven ability to lead design tasks and review the work of others, • Excellent communication and stakeholder management skills, • Chartered or working towards Chartered Engineer status (desirable), • Competitive salary and benefits package, • Hybrid / remote working options, • Opportunities for career progression and professional development, • Exposure to major infrastructure and energy transition projects, • Supportive and collaborative team environment, under the leadership of a supportive and inspiring manager If you're ready to take the next step in your engineering career, we'd love to hear from you. *salary based on skills and experience required for the role #J-18808-Ljbffr

About Archangel Lightworks Archangel Lightworks is a laser communications company building wireless technology. Founded in 2017, we believe that laser communications to and from satellites is a key component of next-generation infrastructure. Our core product, the TERRA-M , is a deployable optical ground station with proven capability for space – ground data transfer . Our team develops and operates products that advance the security and resilience of critical national infrastructure. We value compassion, resilience, curiosity, ownership and integrity. Our start-up is a fast-paced and supportive environment, where you can contribute to novel technology with meaningful applications like reducing the Digital Divide. Archangel Lightworks recently closed over £10 million of investment in an oversubscribed Series A funding round. Our company is also supported by the UK Space Agency, the UK's Department of Science and Technology (DSIT) and the UK Ministry of Defence. About the job We are seeking a Senior Electronics Engineer to lead the design, integration, and testing of complex subsystems within our Optical Communications Terminal. This is a hands-on, highly collaborative role. You'll work closely with our software, mechanical, and optical teams to ensure that all systems are integration-ready and fully verified for Assembly, Integration, and Test (AIT). Your responsibilities will include: Providing strategic leadership of the electronics function to meet organisational objectives Subsystem Ownership, leading the end-to-end development of electrical and electronic subsystems: Requirements definition Architectural design and trade studies Design of electrical parts/systems Component selection, procurement, and supplier coordination Subsystem assembly and verification Maintain power budgets, interface control documents, and system artifacts Hardware-Software Integration Integration at board and subsystem level Implement and debug communication protocols (e.g. CAN, SPI, UART, I2C) Coordinate with embedded software and firmware teams PCB and Harness Development Support PCB production, documentation, and sign-offs Design, test, and maintain system harnessing Collaborate with production partners and testing teams Delegate work and provide reviews and mentorship to colleagues Testing & Ground Support Participate in formal test campaigns Design electrical test equipment Ensure subsystem readiness for full AIT flow. Requirements: 5+ years in electronics development with end-to-end ownership of complex electronic subsystems; proven track record delivering to schedule, cost, and quality Strong background in electronics design theory, University degree or similar Demonstrated experience with electrical hardware-software development: Schematic design PCB layout and testing PCB Component library part creation and maintenance Manage engineering documentation and version control (such as Github) Electronic component selection EMC compliance Microcontroller programming and debugging for board bringup Good knowledge of Electrical design tools PCB tools (e.g. Kicad/Altium) Simulation (e.g Spice) Harness design tools (e.g. RapidHarness) Experience of mentoring junior engineers. Desirable additional skills: High speed electronics design for communications interfaces (Gbps) Design for complex System-on-Chip components (e.g. Xilinx) Experience building & testing harnessing; selecting and procuring electrical components Exposure to space, aerospace, or high-reliability environments (ECSS or similar) Experience designing or supporting production processes from prototype to scaled hardware builds Experience in Tooling and process leadership: requirements management (e.g., DOORS/Jama/SysML), CI for hardware/firmware, configuration control, and traceability from requirements to test. Location: Our office is based in Osney Mead, Oxford. There may be opportunity to work from home as agreed with your line manager. There may be opportunity for periodic business travel. What we offer: Opportunity to work on advanced optical systems to support a world-changing vision A collaborative and transparent culture with strong links between functions Regular socials and weekly company lunch Professional development and skills growth within a specialist engineering field Competitive salary and benefits package, with equity options in a growing start-up 25 days annual leave allowance plus bank holidays. Archangel Lightworks is an equal opportunity employer. As part of our commitment to equality, we work to ensure a fair and consistent interview process. If you need any assistance or accommodation to complete your application or assessment, please contact us through the application form. We recognise that many candidates us AI tools when applying. Please ensure your application reflects your own experience, skills, and thinking. We assess applications based on authenticity and accuracy, so anything generated with AI should be reviewed, personalised, and representative of you. TPBN1_UKTJ

Aldwych Consulting is recruiting a Senior Site Engineer to support a major water-treatment facility on a long-term AMP8 project in the UK. The role focuses on civil and water-sector environments with underground assets, complex pipework and strict QA requirements. You will lead engineering control across RC structures, drainage and underground works, deliver accurate setting-out, review drawings, manage QA records, and mentor junior engineers while coordinating with design, commercial and #J-18808-Ljbffr

Our client, a fast-growing maritime technology innovator, seeks a Senior Design Engineer to own mechanical subsystems from concept to release. You will develop 3D models, drawings, and calculations while coordinating with international suppliers to ensure timely fabrication. The role requires DFMA focus, cost reduction, and mentoring of junior engineers in a production environment. Ideal candidates have 5–10 years’ hands-on mechanical design experience in Marine, Wind, or Offshore, with Siemens #J-18808-Ljbffr

Lead Systems Engineer (DA)Applylocations: GB - Southampton: GB - Basildontime type: Full timeposted on: Posted Todayjob requisition id: R0027117Job Description:Leonardo has an exciting opportunity for a Lead Systems Engineer/Design Authority (DA) to join its NATO JEWCS Integrated Project Team (IPT), within the CEMA and ICS Sector based across the south of the UK. We are producing the next generation Electronic Warfare (EW) Training System assets covering Land, Sea and Air together with an IT infrastructure to enable effective planning, programming and review for NATO exercises.Your impactAs Lead Systems Engineer and Design Authority, you will be responsible for providing the technical oversight and expertise at all levels of the overall system solution, working with both internal and supplier design teams to ensure that the architecture of the overall system solution is developed and delivered to meet the Customer and business requirements.Working across the whole of the systems engineering lifecycle, as part of a multi-disciplined team, the successful candidate will seek advice from SMEs to review and advise on the creation and verification of subsystem technical solutions lead the directly supporting the Project Chief Engineer in ensuring the system and sub system designs are: fit for purpose and due consideration has been made for the integrity of the design compliant with customer requirements and required standard safety of the overall proposed architecture is maintained and assessedAs a result, strong technical, delivery, and people leadership skills and abilities are essential in this role, particularly the ability to discuss and resolve complex technical problems in the EW domain.This role will see the successful candidate join the quickly expanding engineering team within the CEMA and ICS sector and take on a key role in shaping the future of the NATO JEWCS deployed solution combining use of COTS with the latest technologies and ensuring that they meet the needs of the customer. Work closely with the Project Chief Engineer to identify and resolve technical issues across the whole system and subsystems and to ensure the integrity of the solution. Deputise for the Project Chief Engineer within the project. Lead the architecture team to develop and document the architecture thought the project lifecycle. Influence all levels of requirements to enable design and development decisions and trade-offs to be made. Provide direction, control, evaluation and recommendations relating to technical risks and opportunities. Support test planning and requirements verification to achieve certification and delivery for the overall system. Working with and influencing key project stakeholders including customer and end users. Present Architecture material at Design reviews internally and externally for the overall system. Act as a technical interface between the end customer and the Leonardo Engineering team. Actively support knowledge sharing and exploitation of best practice. Support the guidance and development of junior Systems Engineers within the Engineering team. Contribute to the successful achievement of engineering milestones as an integrated part of the Prime team. Support and advise sub-system design teams through their design reviews.* Travel within the UK and abroad to meet with our customers and industry partners.What you’ll bringRequired A degree (or equivalent experience) in a STEM subject and strong numerical, analytical and design skills, with the ability to apply these to real world problems. Strong understanding of system and project lifecycles as applicable to delivery of sub-systems, technical and commercial baselines, and change control. Strong understanding of Systems Architecture activities as part of the Systems Lifecycle. Self-motivated with a strong aptitude for problem-solving and decision-making within projects involving design complexity and uncertainty. Strong experience of influencing system design and integration of a major system. Strong experience in stakeholder management within organisations and with customers (internal or external) in a high-pressure environment, pulling in technical expertise when and where appropriate. Experience of successfully passing Design Reviews and implementing potentially complex remedial actions with sub-contract equipment suppliers and Prime integration teams.Ideally Knowledge of military EW/radar passive and active RF. Strong understanding of systems integration and progressive assurance. Experience of making design decisions by trading-off alternate solution based on functionality, performance and cost.* Chartered engineer / member of the Institute of Engineering and Technology (IET)This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn.Security ClearanceThis role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: gb/en/security-and-vettingWhy join usAt Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive.* Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year.* Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution.* Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity).* Rewarding Performance: All employees at management level and below are eligible for our bonus scheme.* Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning.* Refer a friend: Receive a financial reward through our referral programme.* Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more.* Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role.For a full list of our company benefits please visit our website.Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety.At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know.Be part of something bigger - apply now!Primary Location:GB - SouthamptonAdditional Locations:GB - BasildonContract Type:PermanentHybrid Working:Hybrid #J-18808-Ljbffr

At Intuitive, we are united behind our mission: we believe that minimally invasive care is life-enhancing care. Through ingenuity and intelligent technology, we expand the potential of physicians to heal without constraints. As a pioneer and market leader in robotic-assisted surgery, we strive to foster an inclusive and diverse team, committed to making a difference. For more than 25 years, we have worked with hospitals and care teams around the world to help solve some of healthcare’s hardest challenges and advance what is possible. Intuitive has been built by the efforts of great people from diverse backgrounds. We believe great ideas can come from anywhere—we strive to foster an inclusive culture built around diversity of thought and mutual respect. We lead with inclusion and empower our team members to do their best work as their most authentic selves. Passionate people who want to make a difference drive our culture—our team members are grounded in integrity, have a strong capacity to learn, the energy to get things done, and bring diverse, real-world experiences to help us think in new ways. We actively invest in our team members to support their long-term growth so they can continue to advance our mission and achieve their highest potential. Join a team committed to taking big leaps forward for a global community of healthcare professionals and their patients. Together, let’s advance the world of minimally invasive care. Intuitive Surgical is widely considered the most exciting medical device company in the world today. Surgeons worldwide are changing the way surgery is performed by utilizing our robotic surgical device, the da Vinci® Surgical System, to enhance their surgical precision and greatly improve patient benefits. We have attracted some of the best and brightest on our team and now we are seeking a Field Service Engineer to manage Customer Technical Relations after the point of Sale on All Intuitive Surgical Products, in an assigned territory. This position will require you to work independently, manage and prioritize technical escalations, and establish and maintain expectations with both the direct customer and other Intuitive surgical employees. Intuitive Surgical is widely considered the most exciting medical device company in the world today. Surgeons worldwide are changing the way surgery is performed by utilizing our robotic surgical device, the da Vinci® Surgical System, to enhance their surgical precision and greatly improve patient benefits. We have attracted some of the best and brightest on our team and now we are seeking a Field Service Engineer to manage Customer Technical Relations after the point of Sale on All Intuitive Surgical Products, in an assigned territory. This position will require you to work independently, manage and prioritize technical escalations, and establish and maintain expectations with both the direct customer and other Intuitive surgical employees. • Senior da Vinci® Surgical technical expert across all system platforms., • Analyze customer’s requirements to ensure effective system installation by providing Pre site Planning and Installation Coordination with the customer., • Ability to autonomously manage and schedule both planned and unplanned appointments with Customers to ensure maximum system reliability, functionality and that Uptime Guarantees are achieved. Assess and determine follow up visits to ensure maximum system reliability., • Use discretion and independent judgment when assessing the functionality and Repairing Intuitive Surgical products., • Ability to identify, make recommendations, and or provide feedback to Product Support and Product Engineering on Product or process enhancements that addresses customer concerns., • Provide on-site technical and training support to Junior and Filed Service Engineer, prevent, or ensure proper technical escalation to resolution., • Engage service contract renewal discussion with hospitals by presenting the value proposition of Intuitive Surgical’s service offerings., • Use discretion and independent judgment when assessing customer-training needs with respect to technical training in an Operating Room environment and provide both technical training and or technical support as required., • Independently manage all administrative duties of role that includes but are not limited to; Spare Parts Inventory, Returned Material Authorizations, Calibrated Equipment, Training Documentation, Preventative Maintenance Scheduling, Service Contracts Billings, System Configurations, and data in Call Escalation database., • Support Sales Training and Marketing events by analyzing potential issues and develop independent strategies to resolve., • College degree in applied science or engineering preferred; or equivalent training/experience which may include extensive course work or study in the field of engineering or applied science., • 5-10 years of experience as a Field Service Engineer, including experience in the medical device industry., • Strong written and oral communication skills., • Excellent interpersonal skills., • Strong administrative and record keeping skills., • Strong knowledge of Operating Room protocol., • Track record of solid customer relationships with Surgeons and Hospital staff., • Proven track record in providing training support., • Well versed at presenting the value proposition of service offerings., • Proven ability to independently troubleshoot complex electro-mechanical systems., • An ability to travel up to 25%, dependent upon account distribution. Intuitive is an Equal Employment Opportunity Employer. We provide equal employment opportunities to all qualified applicants and employees, and prohibit discrimination and harassment of any type, without regard to race, sex, pregnancy, sexual orientation, gender identity, national origin, color, age, religion, protected veteran or disability status, genetic information or any other status protected under federal, state, or local applicable laws. We will consider for employment qualified applicants with arrest and conviction records in accordance with fair chance laws. U.S. Export Controls Disclaimer: In accordance with the U.S. Export Administration Regulations (15 CFR 743.13(b)), some roles at Intuitive Surgical may be subject to U.S. export controls for prospective employees who are nationals from countries currently on embargo or sanctions status. Certain information you provide as part of the application will be used for purposes of determining whether Intuitive Surgical will need to (i) obtain an export license from the U.S. Government on your behalf (note: the government’s licensing process can take 3 to 6+ months) or (ii) implement a Technology Control Plan ("TCP") (note: typically adds 2 weeks to the hiring process). For any Intuitive role subject to export controls, final offers are contingent upon obtaining an approved export license and/or an executed TCP prior to the prospective employee’s start date, which may or may not be flexible, and within a timeframe that does not unreasonably impede the hiring need. If applicable, candidates will be notified and instructed on any requirements for these purposes. This position may be filled at a different job level than listed here depending on business need and/or on the selected candidate’s experience, knowledge and skills. Compensation will be based primarily on the job level at which the role is filled and the Day #J-18808-Ljbffr

Lead Electrical Design Engineer Location: London or Southampton (Hybrid) Full time – Permanent Salary: c 75,000 – 80,000 + Benefits Our client is a growing engineering business developing advanced technologies for the maritime sector. Due to continued expansion, they are seeking a Lead Electrical Design Engineer to take ownership of electrical and control system design across a range of innovative projects. This is an excellent opportunity to join a forward–thinking organisation where you will play a key role in delivering complex engineering solutions from concept through to commissioning. • Lead the design and development of electrical and control systems., • Produce electrical schematics, wiring diagrams, calculations and technical documentation., • Specify and integrate PLCs, HMIs, drives, instrumentation and power distribution equipment., • Ensure designs meet relevant industry and regulatory standards., • Support testing, commissioning and system integration activities., • Work closely with customers, suppliers and internal engineering teams., • Provide technical leadership and mentoring to junior engineers., • Degree qualified in Electrical Engineering or a related discipline., • Proven experience in electrical design within marine, offshore, industrial or similar engineering environments., • Strong knowledge of power distribution, automation and control systems., • Experience with PLCs and industrial control hardware., • Familiarity with electrical design software such as AutoCAD Electrical or EPLAN., • Excellent problem–solving and communication skills., • Hybrid working arrangement, • Technically challenging and varied projects, • Professional development opportunities, • Collaborative and innovative working environment If you are an experienced Electrical Design Engineer looking for a senior position where you can lead projects and influence future technology development, we would be keen to hear from you. #J-18808-Ljbffr

Building a sustainable tomorrowBAM Ground Engineering is currently recruiting for a Senior Utility Surveyor to join our team and play a key role in growing our utility surveying capability. This role offers an excellent opportunity for an experienced utility surveying professional to combine hands-on technical delivery with the chance to help develop a growing service area. You will initially lead the delivery of PAS 128 utility surveys and utility detection services, while supporting the development of the systems, standards and processes needed for future growth. You will carry out utility mapping projects, operate utility detection and location instruments, and post-process survey data to produce detailed PAS 128 compliant survey outputs. Strong knowledge of PAS 128 and proven experience in utility surveying are essential. As the role develops, you may also support business development, contribute to equipment and resource planning, and help build and lead a wider utility surveying team. We are looking for someone who is professional, safety-focused and customer-minded, with excellent communication skills and the ability to work effectively with clients, site teams and office-based colleagues. Your team The role can be based from any of our offices in Kilsyth, Godstone, Nailsea or Warrington, with travel to projects and clients as required. • Leading utility survey projects from start to finish, ensuring high standards are met throughout., • Provide specialist technical support to ensure effective and efficient delivery of the project to time, budget and quality, • Utilising modern surveying methods and equipment, including total stations, GPS, and ground penetrating radar., • Conducting thorough inspections and accurately recording underground utility assets and manhole inspection reports., • Delivering completed utility survey reports to Project Managers and CAD Operators in accordance with industry standards., • Building and maintaining strong client relationships to ensure successful project outcomes., • Liaising with clients for project quoting and technical advice, • Mentoring and guiding junior surveyors and assisting them in their professional development., • Conducting quality checks on information collected onsite and ensuring successful transition to final deliverables., • Maintaining and ensuring the functionality of all survey equipment., • Health & Safety Risk Assessment and Planning, • Multiple years' experience delivery Utility surveys, preferably in a senior or leadership role., • Strong understanding of industry standards and practices, with knowledge of PAS 128 and TSA being essential., • Proficient in the use of surveying technologies including ground penetrating radar and electromagnetic location systems., • Excellent communication and interpersonal skills, capable of building relationships with clients and managing project teams., • Demonstrated ability to work in a fast-paced, changing environment and effectively prioritise workloads., • Proven ability to mentor and guide junior team members., • Possess a clean and valid manual driving license., • Relevant qualifications in surveying or a related field are desirable., • Strong educational background in Math and English, with minimum GCSE grades of C or above., • Understanding and practical experience of a range of utility surveys, processes and methodologies, • Able to assist in the planning of any project activity and identify engineering and quality risks., • Practical experience and well developed theoretical knowledge of utility surveys and processes, • Ability to maintain accurate records of appropriate documentation, • Processing and interpreting GPR data., • Producing 2D and 3D CAD drawings for client projects., • Ability to interpret specification, data and drawings correctly and check for error., • Contribute to ensure policies, processes and procedures support in the delivery of compliance., • Professional, dynamic and motivated individual with ability to work alone and as part of a team, • Ability to communicate effectively at all levels., • Flexibility to travel to various job sites nationwide as required., • Ability to understand drawings and communicate to site personnel and workforce., • Awareness of construction site health and safety., • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional development Building a sustainable tomorrow. That's our mission and our promise at BAM. It's how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. We're on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. #J-18808-Ljbffr

Our client is a fast-growing maritime technology innovator developing cutting-edge wind-assisted propulsion systems. Their mission is to drastically reduce fuel consumption and carbon emissions across the global shipping industry. As they scale, they are looking for a Senior Design Engineer to join their engineering team. This is a hands-on, high-impact role where you will manage the entire design lifecycle—from initial concept and detailed design to manufacturing release and operational hardware. If you are passionate about developing real-world climate-impact technology in an innovative, startup-style environment, this is the role for you. In this position, you will take full ownership of key mechanical subsystems, ensuring they are robust, cost-effective, and production-ready. Design Ownership: Lead the mechanical design of subsystems from concept through to manufacturing release. Technical Execution: Produce high-quality 3D models, manufacturing drawings, and necessary engineering calculations. Manufacturing Liaison: Apply Design for Manufacture and Assembly (DFMA) principles to improve standards and reduce costs. International Coordination: Act as the engineering interface with international suppliers to ensure timely delivery. Problem Solving: Rapidly resolve design issues based on feedback from manufacturing and suppliers. Mentorship: Guide and review the work of junior engineers to maintain high standards of integrity and safety. Experience: 5–10 years of hands-on experience in mechanical design within a production environment. Industry Background: Proven track record in the Marine, Wind, or Offshore sectors. Technical Skills: High proficiency in Siemens NX, Inventor, or equivalent 3D CAD tools. Fabrication Knowledge: Strong experience with large structural assemblies, welding, and fabrication. Standards: Familiarity with class or certification requirements (e.g., DNV or LR). Travel: Willingness to travel to manufacturing plants in China (approximately 1 week per quarter) and visit various supplier sites. Language (Highly Desirable): Fluency or partial fluency in Mandarin is a significant advantage and may command a higher salary bracket. You will be joining a mission-led business at the forefront of the green maritime revolution. Our client offers: High levels of ownership and autonomy. The chance to see your designs move from concept to global deployment. Comprehensive relocation and visa sponsorship support for the right candidate. A collaborative environment where innovation is celebrated. #J-18808-Ljbffr

Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover and due to continued success and new Framework awards, we are looking to strengthen our Engineering Team with the appointment of a Civil Design Engineer. IDS, Trant’s internal design team, are involved in all phases of the project lifecycle from feasibility studies through to detailed design and construction support and are instrumental in providing technical support across the business as a whole. The ideal candidate will have a background in Civil Engineering and will be joining our multidisciplined Innovation, Design & Solutions (IDS) department working on the design of projects covering, but not limited to the following: • Water treatment, • Water distribution and storage, • Wastewater recycling, • Flood Defence The Senior Civil Design Engineer will report to the Head of Discipline - Civil as part of a multi-disciplined team of engineers working primarily on Trant’s UK Water Industry Frameworks. They will manage multi-discipline design interfaces and integration of the Civil design elements to deliver fit-for-purpose engineering solutions and lead tasks on a major project or lead several projects of moderate scope with complex features. • Independently applies extensive and diverse knowledge of engineering principles and practices across broad areas of assignments and related fields., • Modifies or extends accepted theories and practices to complete complex assignments., • Demonstrates professional attitudes such as creativity, curiosity, flexibility, and dependability., • Actively promotes consideration of sustainability principles throughout the design lifecycle., • Keeps informed of updates to standards, regulations, and best practices. Interpret, understand & challenge project requirements from Client documents (project scope of work, drawings, specifications, correspondence, etc.). Attend Client sites as required to undertake condition surveys of existing processes, structures and assets, and promoting further opportunities to enhance Client relationships. Be responsible for development of the following Civil detail design deliverables to facilitate the delivery of the project to Eurocodes and industry/Client specifications: • Survey specifications/datasheets (E.g. Topographical, Ground Penetrating Radar, Structural, Ground Investigation etc.)., • Design calculations (E.g. Concrete, steel, hydraulic, foundation, temporary works, etc.)., • Design sketches/drawings using the AutoCAD AEC software collection (E.g. Slabs, structures, buried assets, chambers, access pavements, site layouts etc.)., • Design schedules, buildability statements, design risk assessment, reports, etc. A comprehensive understanding of other discipline requirements and interactions required to deliver a unified and complete design solution. Compliance with OHSA and regulations, ISO and the ability to interpret and take onboard other international safety standards. Maintain a knowledge base and keep up to date with new methods, products and developments affecting the civil and water engineering disciplines and recommend new practices or changes in application. Collaborate closely with internal teams, clients, external design partners and subcontractors to develop and deliver innovative, compliant solutions. Proactively drive a H&S focus throughout the design process and subsequent delivery phase, instigating development of design risk assessments to address risks identified during review activities. Identify and elevate all instances of design change throughout the project lifecycle. Undertake technical bid evaluations, subcontractor/supplier design reviews and integrate compliant outputs into the design development process. Work with the Civil Design Manager to monitor design effort against budget, schedule and quality requirements. Provide technical support and guidance to site teams during installation/commissioning. Develop & review project documentation for compliance with relevant Client & UK water industry standards, regulations and Company QA processes. Manage the project specific design interfaces with Clients, external consultants, subcontractors and suppliers. Promote technical excellence and innovation within the team, contributing to the development of new design methodologies and tools. Present and defend engineering solutions to complex problems in a client/stakeholder facing environment. Excellent written and verbal communications skills along with a high level of computer literacy. Lead, mentor, and develop junior team members, fostering a culture of continuous improvement and knowledge sharing. Upholds and promotes the Company’s Core Values – Care, Trust, Respect and Sustainability. This role is suited to technically strong, commercially aware candidates with a background in Civil engineering in the water industry, or in other closely related industries. Ideally, you would be able to demonstrate the following qualifications, skills/knowledge and behaviours: • CEng/IEng registration with a recognised UK Institution (e.g. ICE)., • BSc/MSc qualification in Civil Engineering discipline., • Significant experience delivering multi-disciplined engineering projects in the UK water/wastewater industry, focusing on water & wastewater treatment plants and pumping stations., • Broad knowledge of industry standards, legislation and engineering principles., • Capable of managing and prioritising multiple projects in a dynamic environment., • Be fully conversant with the Microsoft Office suite of products., • Committed to continuous professional development. We do not expect candidates to be able to tick all these boxes! Enthusiasm, attitude and practical experience is far more important than specific skills or professional qualifications. At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands‑on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in‑house expertise. This means you’ll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in‑house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it’s an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you’re starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. • Competitive salary., • Company car or car allowance., • Mentored support within our ‘Career Development Association’, to work towards chartership., • 24 days holiday (increasing with service) + 8 bank holidays., • Options to buy additional holiday via salary sacrifice., • Company Pension Scheme., • Private Healthcare Insurance., • Flexible working based on a ‘core hours’ system., • 1 x Professional Membership paid annually., • Hybrid working., • Employee Assistance Program., • Free onsite parking., • Bike to Work Scheme., • Annual bonus Scheme. #J-18808-Ljbffr

This job is with ARUP, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Senior Mechanical Engineer - Southampton Joining Arup Arup's purpose, shared values and collaborative approach have set us apart for over 80 years, guiding how we shape a better world. Arup is an independent, employee-owned collective of designers, consultants and experts working globally to shape a better world. In Southampton you will join a supportive, collaborative environment with access to UK and international expertise, training and development, and projects where technical quality and positive impact matter. Watch this part of the clip The opportunity *Unfortunately, we are unable to offer visa sponsorship for this role. Applicants must have the right to work in the UK at the time of application and for the duration of employment. Any offer made will be subject to satisfactory proof of immigration status.* Arup have an exciting opportunity for a Senior Mechanical Engineer to lead mechanical design work packages, support project delivery and help develop Southampton's growing Building Engineering capability. We are looking for a Senior Mechanical Engineer with strong design and coordination skills, who is chartered, close to chartership or able to demonstrate equivalent capability. You will lead mechanical work packages, shape low-energy strategies for new and existing buildings, support junior colleagues and help strengthen our local capability. The team You will join our growing Building Engineering team in Southampton, working with colleagues across the South Coast, the UK and internationally on new build, retrofit and refurbishment projects. The team combines engineering, design and advisory expertise in a collaborative, technically ambitious culture. Responsibilities • Lead mechanical design work packages from feasibility and concept design through to technical design, construction support and handover., • Develop strategies for heating, cooling, ventilation, domestic water, controls and plant/distribution systems with an emphasis on low-energy, maintainable solutions., • Lead calculations, system selection, design analysis and technical decision-making., • Coordinate comfort, thermal, energy, carbon and sustainability inputs, including retrofit and operational performance improvement., • Coordinate mechanical services with architecture, structure, electrical, public health and specialist disciplines., • Manage models, drawings, reports, specifications and other deliverables to agreed quality, programme and budget., • Review work by engineers and technicians, providing clear direction and constructive feedback., • Plan discipline inputs, forecast time, coordinate resources, raise risks early and support bids or client discussions where required. Is this role right for you? We are looking to speak to people who: • We are looking for people comfortable taking responsibility for mechanical design, coordination and delivery in multidisciplinary project environments., • Degree in Mechanical Engineering, Building Services Engineering or a related discipline., • Chartered Engineer status, close to chartership or equivalent professional capability., • Strong practical understanding of mechanical services, including heating, cooling, ventilation, domestic water, controls and plant coordination., • Experience delivering mechanical design across new build, refurbishment and/or retrofit projects., • Ability to lead design elements and coordinate small teams on multidisciplinary projects., • Strong interest in sustainable building design, energy efficiency, carbon reduction, passive design and operational performance., • Experience using or overseeing modelling tools such as IES, TAS, EnergyPlus or DesignBuilder., • Good understanding of relevant standards, regulations, CIBSE guidance, health and safety and industry good practice. Desirable skills and knowledge Experience leading mechanical teams or discipline work packages. Experience in retrofit, heat pumps, low-carbon heat networks, natural ventilation or mixed-mode buildings. Experience with TM54, Part L, NABERS UK, operational energy modelling or post-occupancy evaluation. Working knowledge of Revit, BIM processes and digital delivery workflows. Interest in digital tools, automation or coding to improve engineering workflows. Experience contributing to proposals, fee schedules, bid interviews or client-facing work winning. Experience working with contractors through technical design, construction and commissioning. What we offer you At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. We also provide Private medical insurance, Life assurance, Accident insurance and Income protection cover. In addition, you'll have access to flexible benefits to help you look after all aspects of your wellbeing and give you the freedom and flexibility to find the best solutions for you, your family, and your individual needs. Different People, Shared Values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at http://www.arup.com/careers/your-life-at-arup. We are committed to making our recruitment process and workplaces accessible to all candidates. Please contact Aslam Hussain (Aslam.Hussain@arup.com) to let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you. Our Application Process To understand what to expect next, please visit https://www.arup.com/careers/recruitment-process/ Stay safe online - Arup will never ask for payment or your bank details as part of our recruitment process. To understand what to expect next, please visit https://www.arup.com/careers/recruitment-process/ Stay safe online - Arup will never ask for payment or your bank details as part of our recruitment process. #LI-CN2 #SOUUKJOBS #BldgsMechEng_UKIMEA #BDENGUKIMEA

Designing and creating electrical schematics on bespoke projects. Electrical, Electronics, Junior, Training, Progression, Specialist, Panels, Hardware, Software, Instrumentation, Totton, Southampton, Lymington, Schematics, Design. Electrical CAD Engineer (Bespoke Projects).

Overview Senior Mechanical Engineer at Arup leads mechanical design packages for new, retrofit and refurbishment projects, fostering low-energy, maintainable building services. You will coordinate multidisciplinary teams and shape performance-focused strategies in Southampton’s growing Building Engineering group. The role blends design leadership, project delivery and business development within a collaborative, globally connected firm. You’ll contribute to sustainable outcomes aligned with Arup’s mission and values. Pay / BenefitsProfit SharePrivate medical insuranceLife assuranceAccident insuranceIncome protectionFlexible benefits ResponsibilitiesLead mechanical design work packages from feasibility to handoverDevelop heating, cooling, ventilation, water, controls and plant strategies with low-energy emphasisLead calculations, system selection, design analysis and technical decisionsCoordinate inputs across disciplines (architecture, structure, electrical, PHE, specialists)Manage models, drawings, reports, specs and quality targetsReview work, guide junior engineers, and provide feedbackPlan discipline inputs, forecast time, coordinate resources, and support bids or client discussions Key requirementsDegree in Mechanical Engineering, Building Services Engineering or related disciplineChartered Engineer status or close to chartershipStrong practical understanding of mechanical services and plant coordinationExperience delivering mechanical design for new build, refurbishment or retrofit projectsAbility to lead design elements and coordinate small multidisciplinary teamsInterest in sustainable building design and operational performanceExperience with modelling tools such as IES, TAS, EnergyPlus or DesignBuilderKnowledge of relevant standards, regulations, CIBSE guidance, health and safety and best practicesCollaborative mindsetStrong communication and leadershipProactive risk managementIESTASEnergyPlus

Description Join Trant Engineering and help shape the delivery of complex, high-impact projects. The full job description covers all associated skills, previous experience, and any qualifications that applicants are expected to have. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover and due to continued success and new Framework awards, we are looking to strengthen our Engineering Team with the appointment of a Civil Design Engineer. IDS, Trant's internal design team, are involved in all phases of the project lifecycle from feasibility studies through to detailed design and construction support and are instrumental in providing technical support across the business as a whole. The Role The ideal candidate will have a background in Civil Engineering and will be joining our multidisciplined Innovation, Design & Solutions (IDS) department working on the design of projects covering, but not limited to the following: · Water treatment · Water distribution and storage · Wastewater recycling · Flood Defence The Senior Civil Design Engineer will report to the Head of Discipline - Civil as part of a multi-disciplined team of engineers working primarily on Trant's UK Water Industry Frameworks. They will manage multi-discipline design interfaces and integration of the Civil design elements to deliver fit-for-purpose engineering solutions and lead tasks on a major project or lead several projects of moderate scope with complex features. What You'll Be Doing GENERAL CHARACTERISTICS Independently applies extensive and diverse knowledge of engineering principles and practices across broad areas of assignments and related fields. Modifies or extends accepted theories and practices to complete complex assignments. Demonstrates professional attitudes such as creativity, curiosity, flexibility, and dependability. Actively promotes consideration of sustainability principles throughout the design lifecycle. Keeps informed of updates to standards, regulations, and best practices. TECHNICAL RESPONSIBILITIES Interpret, understand & challenge project requirements from Client documents (project scope of work, drawings, specifications, correspondence, etc.). Attend Client sites as required to undertake condition surveys of existing processes, structures and assets, and promoting further opportunities to enhance Client relationships. Be responsible for development of the following Civil detail design deliverables to facilitate the delivery of the project to Eurocodes and industry/Client specifications: • Survey specifications/datasheets (E.g. Topographical, Ground Penetrating Radar, Structural, Ground Investigation etc.)., • Design calculations (E.g. Concrete, steel, hydraulic, foundation, temporary works, etc.)., • Design sketches/drawings using the AutoCAD AEC software collection (E.g. Slabs, structures, buried assets, chambers, access pavements, site layouts etc.)., • Design schedules, buildability statements, design risk assessment, reports, etc.). A comprehensive understanding of other discipline requirements and interactions required to deliver a unified and complete design solution. Compliance with OHSA and regulations, ISO and the ability to interpret and take onboard other international safety standards. Maintain a knowledge base and keep up to date with new methods, products and developments affecting the civil and water engineering disciplines and recommend new practices or changes in application. SCHEDULE, PROJECT & TASK MANAGEMENT Collaborate closely with internal teams, clients, external design partners and subcontractors to develop and deliver innovative, compliant solutions. Proactively drive a H&S focus throughout the design process and subsequent delivery phase, instigating development of design risk assessments to address risks identified during review activities. Identify and escalate all instances of design change throughout the project lifecycle. Undertake technical bid evaluations, subcontractor/supplier design reviews and integrate compliant outputs into the design development process. Work with the Civil Design Manager to monitor design effort against budget, schedule and quality requirements. MANAGEMENT, SUPERVISION & GUIDANCE Provide technical support and guidance to site teams during installation/commissioning. Develop & review project documentation for compliance with relevant Client & UK water industry standards, regulations and Company QA processes. Manage the project specific design interfaces with Clients, external consultants, subcontractors and suppliers. COMMUNICATION, TEAMWORK & LEADERSHIP Promote technical excellence and innovation within the team, contributing to the development of new design methodologies and tools. Present and defend engineering solutions to complex problems in a client/stakeholder facing environment. Excellent written and verbal communications skills along with a high level of computer literacy. Lead, mentor, and develop junior team members, fostering a culture of continuous improvement and knowledge sharing. CORE VALUES Upholds and promotes the Company's Core Values – Care, Trust, Respect and Sustainability. What We're Looking For This role is suited to technically strong, commercially aware candidates with a background in Civil engineering in the water industry, or in other closely related industries. Ideally, you would be able to demonstrate the following qualifications, skills/knowledge and behaviours: CEng/IEng registration with a recognised UK Institution (e.g. ICE). BSc/MSc qualification in Civil Engineering discipline. Significant experience delivering multi-disciplined engineering projects in the UK water/wastewater industry, focusing on water & wastewater treatment plants and pumping stations. Broad knowledge of industry standards, legislation and engineering principles. Capable of managing and prioritising multiple projects in a dynamic environment. Be fully conversant with the Microsoft Office suite of products. Committed to continuous professional development. We do not expect candidates to be able to tick all these boxes! Enthusiasm, attitude and practical experience is far more important than specific skills or professional qualifications. Why Join Trant? At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands-on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means you'll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it's an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you're starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes. Competitive salary. Company car or car allowance. Mentored support within our ‘Career Development Association', to work towards chartership. 24 days holiday (increasing with service) + 8 bank holidays. Options to buy additional holiday via salary sacrifice. Company Pension Scheme. Private Healthcare Insurance. Flexible working based on a ‘core hours' system. 1 x Professional Membership paid annually. Hybrid working. Employee Assistance Program. Free onsite parking. Bike to Work Scheme. Annual bonus Scheme. Ready to take the next step in your career? xrnqpay Apply now and be part of something bigger.

Location: Ringwood Type: Full-Time | Permanent Sector: Development Infrastructure - Highways, Drainage & Infrastructure Design I'm working with a highly regarded engineering consultancy that is looking to appoint a Civil Engineer or Senior Civil Engineer to strengthen its established civil engineering team in Ringwood. This is a fantastic opportunity to work on an exciting mix of residential, commercial, retail, education, healthcare and regeneration projects, delivering infrastructure solutions from planning through to detailed design and construction. You'll join a supportive team that places a strong emphasis on technical excellence, collaboration and career development. The role offers excellent scope to take ownership of projects while working alongside experienced engineers and multidisciplinary teams. You'll support the delivery of a diverse portfolio of development infrastructure projects across the South. Responsibilities will include: • Designing highways and drainage infrastructure including S38, S278, S104 agreements, SuDS, earthworks and site levels., • Producing detailed infrastructure designs using Civil 3D together with InfoDrainage, MicroDrainage, Causeway Flow or similar software., • Working closely with architects, planners, clients and local authorities to deliver coordinated engineering solutions., • Managing projects through planning and detailed design while ensuring technical quality and programme delivery., • Mentoring junior engineers and supporting the continued development of the wider team., • Consultancy experience delivering UK development infrastructure projects., • Strong background in highways and drainage design for residential and commercial developments., • Experience using Civil 3D and industry-standard drainage software., • Good understanding of S38, S278, S104, SuDS and UK design standards., • Degree qualified in Civil Engineering or a related discipline., • Working towards or already holding professional accreditation with the ICE would be advantageous., • Join a respected consultancy with a strong and diverse pipeline of work., • Deliver projects across residential, commercial, retail, education and regeneration sectors., • Excellent technical support, Chartership mentoring and long-term progression opportunities., • Friendly and collaborative working environment with hybrid flexibility., • Competitive salary up to 60k and comprehensive benefits package. Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. #J-18808-Ljbffr

Lead Electrical Design Engineer Location: London or Southampton (Hybrid) Full time - Permanent Salary: c£75,000 - £80,000 + Benefits Our client is a growing engineering business developing advanced technologies for the maritime sector. Due to continued expansion, they are seeking a Lead Electrical Design Engineer to take ownership of electrical and control system design across a range of innovative projects. This is an excellent opportunity to join a forward-thinking organisation where you will play a key role in delivering complex engineering solutions from concept through to commissioning. • Lead the design and development of electrical and control systems., • Produce electrical schematics, wiring diagrams, calculations and technical documentation., • Specify and integrate PLCs, HMIs, drives, instrumentation and power distribution equipment., • Ensure designs meet relevant industry and regulatory standards., • Support testing, commissioning and system integration activities., • Work closely with customers, suppliers and internal engineering teams., • Provide technical leadership and mentoring to junior engineers., • Degree qualified in Electrical Engineering or a related discipline., • Proven experience in electrical design within marine, offshore, industrial or similar engineering environments., • Strong knowledge of power distribution, automation and control systems., • Experience with PLCs and industrial control hardware., • Familiarity with electrical design software such as AutoCAD Electrical or EPLAN., • Excellent problem-solving and communication skills., • Hybrid working arrangement, • Technically challenging and varied projects, • Professional development opportunities, • Collaborative and innovative working environment If you are an experienced Electrical Design Engineer looking for a senior position where you can lead projects and influence future technology development, we would be keen to hear from you. #J-18808-Ljbffr

Placements24 seeks an experienced Senior Installation & Maintenance Engineer to lead critical projects in Randburg. This senior role focuses on deployment, upkeep, and optimization of complex systems, overseeing installation teams and troubleshooting advanced issues. You will develop preventative maintenance plans, mentor junior technicians, and collaborate with engineering and operations to improve reliability and efficiency across the infrastructure in Gauteng. #J-18808-Ljbffr

Trant Engineering Ltd. seeks a Senior Civil Design Engineer to join the IDS team and deliver civil design across water treatment, distribution, storage, and flood defence within UK water frameworks. The role involves leading multi-disciplinary design interfaces, ensuring Eurocodes compliance, and mentoring junior engineers while collaborating with clients and partners to deliver high-quality, sustainable solutions. #J-18808-Ljbffr

Matchtech is seeking a Senior Mechanical Design Engineer to join our client’s marine division on exciting shipbuilding and offshore projects in Southampton. You will lead mechanical system design, develop detailed drawings, and ensure designs meet marine industry standards. You will collaborate with multi-disciplinary teams, perform analyses and simulations, mentor junior engineers, and help manage project timelines to deliver robust, high-quality solutions. #J-18808-Ljbffr

Our client is seeking an experienced Senior Installation & Maintenance Engineer to lead critical projects in Randburg. This senior role demands a high level of technical expertise and project management capability, focusing on the successful deployment, upkeep, and optimization of complex systems. You will oversee installation teams, develop maintenance strategies, and troubleshoot challenging technical issues. The ideal candidate is a strategic thinker, a skilled engineer, and a strong leader committed to ensuring the highest standards of performance and reliability for our client's infrastructure in the Gauteng region. • Lead and manage on-site installation projects from planning to completion., • Develop and implement comprehensive preventative and corrective maintenance plans., • Troubleshoot and resolve advanced technical issues with complex machinery and systems., • Mentor and guide junior technicians and installation crews., • Collaborate with engineering and operations departments to improve system efficiency and reliability., • Ensure all work complies with industry standards, safety regulations, and company policies., • Minimum of 7 years of experience in installation and maintenance engineering, with a significant portion in a lead or senior capacity., • Deep understanding of mechanical, electrical, and control systems., • Proven ability to manage projects, resources, and teams effectively., • Strong analytical and problem-solving skills for complex technical challenges., • Excellent communication and leadership abilities., • Relevant engineering degree or professional certification is required., • Executive-level salary and bonus structure., • Company car, fuel card, and comprehensive travel expenses., • Top-tier medical, dental, and vision insurance coverage., • Generous annual leave and professional development budget., • Key role in shaping the technical future of a leading organization. #J-18808-Ljbffr

At Ordnance Survey, our data and technology help governments, businesses and communities make smarter decisions every day. As we continue to evolve our digital platforms and location services, we're looking for skilled Senior Test Engineers to help us build secure, high-quality software that delivers real impact. As a Senior Test Engineer, you'll play a key role in building and maintaining software components using modern, iterative delivery methods. You'll champion best practice in testing and software quality, working closely with engineers and product teams to ensure our services remain reliable, secure and scalable. You’ll contribute hands‑on expertise while helping to mentor others and support services once they're live, identifying issues early and improving how we deliver software across the organisation. • Implement automated tests using existing frameworks, and build new tools and/or frameworks as is necessary to meet testing needs/improve testing practices, • Look for and execute on opportunities to improve testing practice for your team, and the wider engineering community, • Analyse upcoming deliverables to determine suitable test strategies and plans to ensure business requirements, and a high level of quality are met, • Contribute testing acumen into agile team ceremonies such as sprint planning, retrospectives, and daily standups, • Mentoring junior test engineers for both technical and non‑technical skills, as well as taking on people leadership, • Communicate software risks, test goals, and outcomes with a variety of team members, including data architects, delivery managers, data engineers, and other key stakeholders, • Support the Ordnance Survey Testing Guild by developing common technical standards and ways of working, and presenting these to the community, • Scala, • Apache Spark, • Databricks, • Apache Parquet, • Azure Cloud Platform, • Azure DevOps (Test plans, Backlogs, Pipelines), • GIT We’d love to hear from you if you have: • Strong experience in creating, maintaining and peer reviewing test automation code in Scala/Python, • Strong experience with data testing or ETL testing, including hands‑on experience with the tools used in these areas, • Excellent knowledge and skills in software testing & industry best practices, • Excellent knowledge & experience with Agile Scrum, collaborating with the team for backlog refinement and ability to estimate testing activities for sprint planning, • Hands‑on experience of putting together CI/CD pipelines, knowing how and when to run these as part of an ongoing build & test cycle We want you to love what you do and feel supported to do your best work. • Competitive salary and pension (OS contribute up to 12.07%), • Performance‑related bonus (where applicable), • 28 days annual leave plus bank holidays (increasing with service), • Enhanced family leave, including paid partner leave, • Hybrid and flexible working options, • Learning and development support, coaching and mentoring, • Free subscription to OS Maps and access to wellbeing support, • Volunteering leave and matched fundraising We embrace a hybrid working model at OS, because we believe in flexibility and balance. You’ll be based at our fantastic HQ in Southampton, Hampshire, where you’ll spend 50% of your working week collaborating face‑to‑face with colleagues. It’s all about combining the best of both worlds connection and autonomy to help you thrive. OS conducts pre‑employment checks for anyone made an offer of employment, including identity, right to work, employment history and criminal record checks (via Disclosure & Barring Services (DBS). Some of our roles may require additional security vetting. We will advise candidates during the recruitment process if additional vetting may be required for that specific role. This role requires the right to work in the UK at the time of application. Unfortunately, OS cannot provide visa sponsorship for this position. Research shows that people from underrepresented groups often hesitate to apply unless they meet every requirement. At Ordnance Survey, we’re committed to building a diverse, inclusive and welcoming workplace. If this role excites you but your experience doesn’t match every point, we encourage you to apply. You may be the right person for this role or another opportunity at OS. We are happy to consider any reasonable adjustments that people may need during the recruitment process, and you will be asked whether you require any during the application process. Closing date: 23:59pm 13 September 2026 Interviews will take place from MS Teams The selection process includes a 30-minute discovery call followed by a 1-hour competency and technical task designed to assess skills and experience relevant to the role. We are Ordnance Survey, Great Britain’s national mapping service and a pioneer in geospatial technology. With over 230 years of trusted data, we empower better decisions, deeper understanding, and meaningful connections to the places we live, move through, and care for. • Clear the path - Cut the noise. Simplify. Move at pace, • Seek the story - Listen. Understand. Speak up, • Do what matters - Focus on value Our principles unite us in delivering our Data & Destinations strategy with more simplicity, more clarity, and renewed momentum for each other and for our customers. They’re here to create more good days, and fewer harder ones but only if each one of us plays our part. Computer Coding, Leadership, Production Services, Resilience Training, Software Development, Software Engineering, Technical Leadership, Waterfall Model, Web Development #J-18808-Ljbffr

Application Deadline: 18 December 2026 Department: Civil Employment Type: Permanent - Full Time Location: Southampton Reporting To: Trevor Mossop Join Trant Engineering and help shape the delivery of complex, high-impact projects. Trant Engineering is a leading EPC contractor with a strong reputation for delivering innovative engineering solutions across the UK and internationally. With over 1,000 employees and a £150m turnover and due to continued success and new Framework awards, we are looking to strengthen our Engineering Team with the appointment of a Civil Design Engineer. IDS, Trant’s internal design team, are involved in all phases of the project lifecycle from feasibility studies through to detailed design and construction support and are instrumental in providing technical support across the business as a whole. The Role The ideal candidate will have a background in Civil Engineering and will be joining our multidisciplined Innovation, Design & Solutions (IDS) department working on the design of projects covering, but not limited to the following: • Water treatment, • Water distribution and storage, • Wastewater recycling, • Flood Defence The Senior Civil Design Engineer will report to the Head of Discipline - Civil as part of a multi-disciplined team of engineers working primarily on Trant’s UK Water Industry Frameworks. They will manage multi-discipline design interfaces and integration of the Civil design elements to deliver fit-for-purpose engineering solutions and lead tasks on a major project or lead several projects of moderate scope with complex features. • Independently applies extensive and diverse knowledge of engineering principles and practices across broad areas of assignments and related fields., • Modifies or extends accepted theories and practices to complete complex assignments., • Demonstrates professional attitudes such as creativity, curiosity, flexibility, and dependability., • Actively promotes consideration of sustainability principles throughout the design lifecycle., • Keeps informed of updates to standards, regulations, and best practices., • Interpret, understand & challenge project requirements from Client documents (project scope of work, drawings, specifications, correspondence, etc.)., • Attend Client sites as required to undertake condition surveys of existing processes, structures and assets, and promoting further opportunities to enhance Client relationships., • Be responsible for development of the following Civil detail design deliverables to facilitate the delivery of the project to Eurocodes and industry/Client specifications:, • Survey specifications/datasheets (E.g. Topographical, Ground Penetrating Radar, Structural, Ground Investigation etc.)., • Design calculations (E.g. Concrete, steel, hydraulic, foundation, temporary works, etc.)., • Design sketches/drawings using the AutoCAD AEC software collection (E.g. Slabs, structures, buried assets, chambers, access pavements, site layouts etc.)., • Design schedules, buildability statements, design risk assessment, reports, etc.)., • A comprehensive understanding of other discipline requirements and interactions required to deliver a unified and complete design solution., • Compliance with OHSA and regulations, ISO and the ability to interpret and take onboard other international safety standards., • Maintain a knowledge base and keep up to date with new methods, products and developments affecting the civil and water engineering disciplines and recommend new practices or changes in application., • Collaborate closely with internal teams, clients, external design partners and subcontractors to develop and deliver innovative, compliant solutions., • Proactively drive a H&S focus throughout the design process and subsequent delivery phase, instigating development of design risk assessments to address risks identified during review activities., • Identify and elevate all instances of design change throughout the project lifecycle., • Undertake technical bid evaluations, subcontractor/supplier design reviews and integrate compliant outputs into the design development process., • Work with the Civil Design Manager to monitor design effort against budget, schedule and quality requirements., • Provide technical support and guidance to site teams during installation/commissioning., • Develop & review project documentation for compliance with relevant Client & UK water industry standards, regulations and Company QA processes., • Manage the project specific design interfaces with Clients, external consultants, subcontractors and suppliers., • Promote technical excellence and innovation within the team, contributing to the development of new design methodologies and tools., • Present and defend engineering solutions to complex problems in a client/stakeholder facing environment., • Excellent written and verbal communications skills along with a high level of computer literacy., • Lead, mentor, and develop junior team members, fostering a culture of continuous improvement and knowledge sharing. Upholds and promotes the Company’s Core Values – Care, Trust, Respect and Sustainability. This role is suited to technically strong, commercially aware candidates with a background in Civil engineering in the water industry, or in other closely related industries. Ideally, you would be able to demonstrate the following qualifications, skills/knowledge and behaviours: • CEng/IEng registration with a recognised UK Institution (e.g. ICE)., • BSc/MSc qualification in Civil Engineering discipline., • Significant experience delivering multi-disciplined engineering projects in the UK water/wastewater industry, focusing on water & wastewater treatment plants and pumping stations., • Broad knowledge of industry standards, legislation and engineering principles., • Capable of managing and prioritising multiple projects in a dynamic environment., • Be fully conversant with the Microsoft Office suite of products., • Committed to continuous professional development., • We do not expect candidates to be able to tick all these boxes! Enthusiasm, attitude and practical experience is far more important than specific skills or professional qualifications. At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands‑on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means you’ll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it’s an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you’re starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes. • Competitive salary., • Company car or car allowance., • Mentored support within our ‘Career Development Association’, to work towards chartership., • 24 days holiday (increasing with service) + 8 bank holidays., • Options to buy additional holiday via salary sacrifice., • Company Pension Scheme., • Private Healthcare Insurance., • Flexible working based on a ‘core hours’ system., • 1 x Professional Membership paid annually., • Hybrid working., • Employee Assistance Program., • Free onsite parking., • Bike to Work Scheme., • Annual bonus Scheme. #J-18808-Ljbffr

Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool, Junior. Junior Plant Engineer (Mechanical). Are you an apprenticeship trained Mechanical Engineer seeking a step up in your

Working closely with the Engineering Systems Planner and wider Engineering team, you will play a key role in maintaining accurate engineering data, supporting planned maintenance activities and ensuring SAP is used effectively across the site. Junior Engineering SAP Specialist. Desirable Requirement

SFA (Oxford) is seeking an energetic engineer/scientist to design, build and publish machine learning and applied AI systems used in mining, processing, HR and finance.

A global energy trading company is seeking an Associate Developer based in London.The ideal candidate should have a strong background in Comp Science or a STEM degree, along with knowledge in C# and SQL.The role involves working within the Front Office to support trading operations, with a focus on