Trabajos mechanical en , London - Page 5Crear alertas

Our client is a national FM Provider that operates across a variety of sectors.It is currently looking to hire a Mechanical Maintenance Engineer to work at a hospital in London. As the Mechanical Maintenance Engineer, you will report into the supervisor and join a large maintenance team at a busy site. You will be responsible for carrying out daily planned and reactive maintenance to the hospitals ... ZIPC1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to th... ZIPC1_UKTJ

Mechanical MaintenanceEngineer South East London £46,200 Location:Plumstead, South East London Salary:up to £46,200 per annum Shifts:Monday to Friday, 08:00-17:00 About the Role Were currently recruiting for an experienced MechanicalMaintenanceEngineer to join a leading building maintenanceprovider at a large multi-tenanted site near Plumstead station. Youll be part of a skilled engineering team, deli... ZIPC1_UKTJ

?Mechanical PlumberLocation: CamberwellHours of Work: Monday to Friday 8am to 5pmSalary: £46,000+Apt Talent Solutions are currently recruiting for a Mechanical Plumber to carry out PPM and reactive works on a static commercial building in Camberwell. Job Role: • The Mechanical Plumber will be required to perform general preventive maintenance, repair, testing, installation, and troubleshooting of ... ZIPC1_UKTJ

TristoneNash are working with a provider of social housing, to assist them with the recruitment of an M&E Contracts Manager. The Contracts Manager will oversee replacement, servicing, maintenance, and small project works, ensuring systems are safe, compliant, and operating efficiently. Key responsibilities will include: • Leading the management of contracts for assigned mechanical and electrical systems, ensuring safe, compliant, and value-for-money service delivery., • Maintaining up-to-date knowledge of statutory legislation, British Standards, and guidance (including SFG20), ensuring full compliance with all safety obligations., • Monitoring contractor performance against specifications and KPIs, chair review meetings, and drive continuous improvement where required., • Managing budgets, forecasting, spend control, and authorise payments and contract variations as appropriate., • Analysing repairs data and emerging trends to inform planned works and long-term maintenance strategies., • Acting as a key point of contact for contractors, customers, and stakeholders, resolving operational matters and keeping customers informed of planned works., • Developing and overseeing structured audit and inspection programmes, maintaining accurate electronic compliance records from inception to closure. To apply for this position we are looking for: • A Level 3 NVQ Diploma in Mechanical Engineering Maintenance and Repair (or equivalent experience)., • Strong technical knowledge of M&E systems, safety requirements, and commercial contract management., • Experience managing third-party suppliers and delivering large-scale M&E testing programmes., • A sound understanding of current building regulations and Health & Safety legislation, including CDM., • A good working knowledge of Microsoft Office (Word, Excel, Outlook)., • Be willing to work in the office and travel between sites as required. Please submit your CV for consideration or alternatively contact a member of the team for more information.

Building Manager Based in London Role Summary: • Responsible for the contract management of the staff, operation and maintenance of all electrical and mechanical plants/services, project works and Building performance., • Daily management of the Engineering team including compliance with company disciplinary processes and procedures., • Control and monitor the performance of specialist service providers and subcontractors., • To direct, instruct and manage all staff under their control as well as SSP’s ensuring compliance with working practices., • To complete the weekly operational performance reports to the client and attend weekly operations meeting, client meetings as requested, in conjunction with the client., • Ensure SLA, KPI and audits scores are upheld to the agreed minimum standard and reported to the client on a regular basis., • Ensure that all matters that may impact the smooth running of the building and facilities are immediately reported., • To conduct regular reviews of operating procedures making recommendations for improvement with appropriate working practices and emergency/contingency procedures within the critical systems., • Liaise and keep informed both the client and the company Area Manager on all aspects of contract problems (defects & deficiencies)., • Continuously drive innovation, ESG and social value for both clients and company., • To ensure that all staff within their control are conversant with the operation and control of critical and noncritical systems installed within the portfolio., • To ensure quality is maintained throughout the facilities., • Ensuring business policies and processes are effectively communicated and implemented within the contract., • Ensure optimum staffing structures operate across contracts, balancing cost reduction with the delivery of service excellence., • Working with other Operations Managers to ensure the collaborative development of the business, effective team working, and support to colleagues., • Plan and successfully deliver annual black building test and provide a comprehensive report to the client following completion., • Development of contract financial plans for revenue and profit delivery, reduction of WIP, debt, cost reduction and contract growth, and ensure that these are met and exceeded., • Ensure appropriate control systems to ensure statutory, policy and contractual commitments are met., • Ensuring a customer focus within all areas of operational activities, and that effective relationships are maintained with key client contacts., • Provision of leadership and guidance, advice, coaching and direct support, where required to deliver best practice selection, training, assessment and recognition/reward., • Delivering effective business communication through advice, review, leadership and direct contribution to management and team meetings, briefings, consultation forums, correspondence, publicity, monthly and ad-hoc reporting and other publications, as appropriate., • Provide a learning environment, and appropriate training and development planning. Ensure basic training needs are delivered, employees are fully competent to undertake their roles, and are able to reach their full future potential., • Demonstrate a willingness to attend on and off site training for plant and systems as they are installed. This may require nights away from home., • Experience in Building Services industry., • Completed recognised formal Electrical or Mechanical training to at least city and Guilds level, preferably ONC/HNC or Higher., • Strong communication skills. Ability to lead, motivate and direct a team of technicians/operatives., • Possess an understanding of Health and Safety issues, NEBOSH / IOSH, or equivalent formal training would be desirable., • Conversant with Microsoft Office (Word, Excel, Outlook, PowerPoint)., • A good level of English and Mathematics required., • Financial acumen with experience in running P&L consisting of multiple clients/stakeholders., • Experience in CAFM and management systems., • Strong organisational and communication skills with the ability to prioritise workloads., • Ability to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints.

Maintenance Engineer (Textiles Machinery) North London, England £45,000 - £55,000 + Training + Progression + Pension + Company Benefits Are you a Maintenance Engineer or similar, having a multiskilled 50/50 split coming from a background within the production/manufacturing/textiles/machinery industry or a related field, looking to take the next step in your career by joining a well-established, rapidly growing company leading company, recognised for being at the very forefront of luxury linen innovation? Do you want to become a key figure in a team of highly impressive, sector specialists, housed by a well-respected company, holding a nationwide presence, recognised for their premium quality service and best-in-class workmanship in every project they undertake? On offer for the successful Maintenance Engineer or similar is the exciting opportunity to join a well-established, highly impressive company, recognised for their premium quality service and best in class workmanship in every project they undertake. Presenting itself is the unmissable opportunity to join a rapidly-growing company, offering not only industry leading training and development alongside scalable career progression pathways, but also the chance to work at the very forefront of technical innovation within luxury linen production. In this role, the successful Maintenance Manager or similar will be responsible for both the reactive and preventative maintenance of textile production machinery. This is a shift-work role, operating on a two-week rota, with week one being a 4 on/3off split, and week two being a 3 on/4 off split. In addition, you will also be responsible for the service and repair of production machinery. On top of this, you will also be responsible for the trouble shooting and diagnostics of said machinery. Finally, you will be responsible for keeping accurate technical documentation of any projects worked. The ideal Service Engineer or similar will come from a background within the production/manufacturing/textiles/machinery industry or a related field. In addition, you will also have had previous working experience within a Multiskilled/Maintenance/Service Engineer role or similar, having a 50/50 mechanical, electrical split. On top of this, you will have both a customer focus as well as a commercial awareness. Finally, you will have strong organisational and communicational skills as well as being happy to work rotating shifts. The Role: • Reactive and preventative maintenance, • Trouble shooting and diagnostics, • Background within the production/manufacturing/textiles industry or a related field, • Previous working experience within a Multiskilled/Maintenance/Service Engineer role or similar Keywords: Multiskilled, Engineer, Engineering, Maintenance, Service, Repair, Production, Manufacture, Manufacturing, Manager, Management, Operations Manager, Luxury, Linen, Commercial, North London, London, England If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

AR833 - Field Service EngineerLocation: NeasdenSalary: £37,500 - £48,000Overview:First Military Recruitment are searching for a Field Service Engineer to join our client, a leading provider of commercial laundry and catering equipment solutions. With over 50 years of industry experience, the company offers a full-service package, including equipment supply, installation, maintenance, and repair across a wide range of sectors from hospitality and healthcare to sports and private landlords.This is a field-based role covering London and the South East. You’ll be joining a professional and expanding service team, acting as a key ambassador by delivering a high standard of service and support to clients.Our client strongly encourages applications from ex-military personnel but all applications will be considered. Duties and Responsibilities: • Attend service calls to diagnose, repair, and report on faults with commercial laundry and catering equipment, • Identify and report on equipment and installation conditions, making recommendations where appropriate, • Carry out commissioning checks on installed equipment, • Perform basic installations of laundry machines, chemical dosing, and ozone systems, • Recondition and test ex-rental equipment for redeployment, • Conduct routine maintenance visits as required, • Mechanical and electrical engineering experience (Gas Safe qualification preferred but not essential), • Strong problem-solving and diagnostic skills, • Good verbal and written communication skills, • Professional and personable manner when dealing with customers, • Ability to manage workload independently and meet deadlines, • Comfortable working under pressure in a fast-paced environment, • Strong work ethic, attention to detail, and pride in workmanship

Field Service EngineerSalary: £40,000-£45,000 + Overtime Location: Enfield Applications are invited from experienced Field Service Engineers to support the installation, servicing, maintenance, and commissioning of a broad range of security equiptment. Candidate Profile The successful applicant should ideally possess: • Ability to read and interpret electrical and mechanical drawings (full product-specific training provided)., • Full UK driving licence., • Ability to work independently while also contributing effectively within a team environment., • Strong verbal and written communication skills., • Electrical and mechanical engineering experience., • Fault-finding, repair, installation, and commissioning experience., • Experience carrying out site surveys., • Be physically fit due to the practical demands of the role., • Be capable of passing security clearance procedures., • Have a flexible, positive, and proactive attitude., • 3-phase electrical experience and/or 18th Edition qualification., • Health & Safety certifications or training., • Welding qualifications or practical welding experience., • Hydraulic, pneumatic, or fluid systems experience., • Previous experience working with automated gates, barriers, blockers, or similar equipment.Additional Information, • Occasional overseas travel may be available but is not mandatory., • This is primarily a home-based field role, although occasional overnight stays may be required., • Weekend and occasional night work will form part of the position., • The role offers a varied working environment suited to someone who enjoys diversity in their day-to-day activities., • Standard hours are based on a 40-hour week, Monday to Friday, although flexibility is required as schedules can change depending on operational requirements., • Overtime and out-of-hours work will be required, sometimes at short notice., • The position involves predominantly outdoor work., • Company vehicle, tools, PPE, uniform, and mobile phone provided., • Competitive salary with uncapped overtime opportunities.

Job Profile for Static Mechanical Engineer & SEL46556 Position: Static Mechanical Engineer Location: Kew Gardens Estate Salary: £48k Our client is a major service provider in London with over 50 years of success and continued growth. Due to recent success, they are seeking a Static M&E Engineer to join their ever-expanding M&E Division. This division operates across London, managing a range of blue-c... ZIPC1_UKTJ

Job Title: \nHigh Level Technician (Rolling Stock)\n\nJob Location: \nSouthwest London \n\nHourly Pay Rate: \n£31.48 PAYE / £ 41.11 Umbrella \n\nShifts: \nMinimum of 50 hours a week \n\nShift Pattern: \nPanama . Days and nights\n\nDuration: \nOn-going contract\n\nStart Date: \nASAP\n\nIndustries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering\n\nDisciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer\n\nClient Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. \n\nPosition Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 345 Crossrail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service, and resolve any issues on the network.\n\nThe candidate will need to provide high level technical support to the operator which will include:\n* High Level fault finding electrically\n* High Level fault finding mechanically\n* Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) \n* FRACAS - Failure reporting, analysis and corrective action system\n* Produce solutions that provide short term mitigation and long term resolution \n* Monitoring of warranty issues and liaising with supplier technical teams \n* Attending to faulty trains in service, component replacements and modification work \n* Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. \n* Ensuring correct replacement parts are sourced \n* Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required \n* Monitoring trains reliability & availability performance and issuing monthly performance reports \n* Monitor of trains in Service using remote monitoring system called Orbita \n* Down load train data from onboard train data recorders using laptops \n* Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. \n* System software updates as required \n* Obsolescence avoidance and mitigation \n* Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions \n* Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer \n* Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. \n* Contribution to Health and Safety on a daily basis. \n* Strong report writing skills. \n\nQualifications:\n* Minimum qualification required - NVQ Level 3 in an electrical discipline. \n\nExperience required:\n* Experience within Rail desirable \n* Use of Laptop's and diagnostic tools to determine faults \n* Ability to work from maintenance manuals and schematics \n* Experience of Mechanical or Electrical fault finding \n* Experience of Mechanical or Electrical repairs \n* Troubleshooting and evidence gathering. \n\nPerson profile:\n* You will be a highly self-motivated individual, able to work under your own initiative \n* You will possess excellent communication & interpersonal skills \n* You will need extensive all-round knowledge of Mechanical Engineering \n* You will need extensive all-round knowledge of Electrical Engineering. \n\nThis could also include the following:\n* Responsible for accurate completion of all paperwork prior to supervisor validation. \n* Undertake technical maintenance to the required standards.\n* Reliability monitoring reporting \n* Data analysing \n* Rip out and replace electrical components\n* Rip out and replace full or part of large wiring looms\n* Re-install wiring \n* Test Continuity\n* Battery Modifications\n* Repairing or installing Wi-Fi systems\n* Changing relay boxes / Wiper motors\n\nIf you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed).\n\nPLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.\n\nPlease note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.\n\nPlease note the above job specification could be subject

Please note, this company is not able to offer a sponsorship visa at this time. We are seeking an experienced Principal or Associate Mechanical Design Engineer to join this dynamic team in the field of Building Services Engineering. As a key member of the organisation, you will play a crucial role in designing and optimising mechanical systems for large-scale projects. The successful candidate will be responsible for taking the lead in projects of various scales and will delegate drawing and thermal calculations to junior staff members. Your expertise will contribute to the successful delivery of sustainable, efficient, and innovative solutions. Responsibilities: • Collaborate with architects, project managers, and other engineers to develop mechanical designs for HVAC, plumbing, and drainage systems for mission critical projects, • Conduct feasibility studies, site surveys, and energy assessments to inform design decisions., • Prepare detailed engineering drawings, specifications, and calculations., • Ensure compliance with relevant codes, standards, and regulations., • Evaluate equipment and materials for suitability and cost-effectiveness., • Participate in project meetings and coordinate with multidisciplinary teams., • Provide technical support during construction and commissioning phases., • Contribute to continuous improvement initiatives within the mechanical design team. Qualifications: Requirements: • Bachelor's degree in Mechanical Engineering or related field (BEng minimum)., • Chartered Engineer status (preferred). * Minimum 5-6 years of experience in mechanical design for building services., • Proficiency in relevant software tools (e.g., AutoCAD, Revit, HAP, TRACE, etc.)., • Strong understanding of HVAC, plumbing, and fire protection systems., • Excellent communication skills and ability to work collaboratively., • Passion for sustainable design and energy efficiency

Quality Assurance Engineer - Mechanical Location: North London (site-based) We are seeking a Quality Assurance Engineer with a mechanical background to join a major infrastructure project in North London. This is an opportunity to be part of a large-scale, sustainability-focused development. Key Responsibilities • Support the implementation of quality control plans and procedures for mechanical works, • Conduct inspections to ensure compliance with specifications, standards, and codes, • Monitor site activities and subcontractor performance, • Manage QA/QC documentation, including RFIs and inspection records, • Coordinate inspection and testing activitiesRequirements, • Degree in Mechanical or Industrial Engineering (or similar), • Experience in QA/QC within construction or industrial projects, • Knowledge of ISO 9001 quality management systems

Technical Services Manager (Electrical) Designer Group | London | full-time Designer Group delivers complex mechanical & electrical packages across commercial and infrastructure projects in the UK, Ireland and Europe. Our engineering model is different. We don’t carry large in-house design team,s instead we partner with leading design consultancies and take full responsibility for how those designs are delivered on site. This role sits right at that interface. We’re looking for an electrical engineer who understands how design translates into reality. Someone who can take a consultant’s design, review it against the constraints of the project, and make sure it actually works: on site, within programme, and within the commercial boundaries of the job. This is not a pure design role. It’s about judgement, coordination and practical problem solving. You’ll be working closely with external design partners, project teams and client stakeholders. You’ll review drawings, challenge where needed, make adjustments where required, and ensure the design aligns with how the project will actually be built. You’ll also manage the design supply chain keeping things moving, resolving issues quickly, and maintaining momentum through delivery. You don’t need to be a career designer. In fact, this role will suit someone who has come through site, project engineering or technical services and understands the realities of installation and delivery. What you’ll be doing • reviewing and validating electrical designs from external consultants, • ensuring designs align with site conditions, programme and buildability, • managing and coordinating design consultants through delivery, • working closely with site teams to resolve design issues in real time, • handling RFIs, design changes and client-driven adjustments, • making practical amendments to designs where required (not full redesign), • supporting preconstruction and delivery teams with technical input What we’re looking for • background in electrical building services (contractor side preferred), • experience working on live projects (commercial / fit-out / similar), • strong understanding of how design translates to site, • ability to read and challenge drawings with confidence, • experience dealing with consultants, subcontractors and site teams, • adaptable, solutions-focused and comfortable in a fast-paced environment, • HNC / HND / Degree in Building Services Engineering (Electrical) If you’re currently in a project engineering, technical services or site-based role and looking to move closer to the engineering/design interface, this is a strong next step.

Full-time position. Onsite 5 days a week – Chiswick, London. We’re hiring a Mid Embedded Engineer to help develop, test, debug, and integrate the electronics and firmware systems at the heart of the HoloDrive platform and help bring our ambitious first product to market. About HoloMem At HoloMem, we’re building the next generation of mass data storage hardware; highly efficient, long life, and ultra durable. Our pioneering and patented holographic technology encodes data as light within advanced polymers, enabling a resilient and future fit alternative to today’s short lived and energy intensive data storage infrastructure. Over the past 24 months HoloMem has graduated from both the Intel Ignite and Deeptech Labs accelerators, been awarded two Innovate UK Smart Grants, closed a seed+ funding round, and most recently deployed a working HoloDrive prototype to a live data centre to prove the robustness of our system. Off the back of our breakthrough partnership with BDT, the world’s largest tape library manufacturer, we now begin the transition from prototype to product, maturing our validated system into a mass-produced technology platform that enables state of the art data storage performance at scale. We have ambitious plans, and we are now scaling up our West London based team to enable them. Join us. What You’ll Be Doing You will work hands-on across embedded software, electronics, test rigs, and prototype systems in a fast-moving R&D environment. You will develop and maintain embedded systems and tooling that enable reliable experimentation, rapid iteration, and repeatable system performance. Working at the interface of electronics, firmware, optics, and software, you will lead bring-up, debugging, and preventative maintenance for defined rigs, boards, and prototype subsystems. You will also contribute to HoloDrive product integration by helping translate experimental systems into more robust, scalable, and maintainable engineering solutions. This role requires practical embedded engineering judgement, strong debugging discipline, and the ability to make progress when requirements are still evolving. The Specifics About the Role This role is suited to a mid-level embedded engineer who can demonstrate the ability to: • Develop, test, and debug embedded software for prototype and product-adjacent systems, • Own defined embedded workstreams from implementation through bring-up, validation, and documentation, • Support the design, integration, and maintenance of precision electronic and electromechanical systems, • Work with microcontrollers, sensors, motors, encoders, drivers, and communication interfaces, • Improve the repeatability, reliability, and maintainability of experimental platforms, • Create practical tools, scripts, or test routines that improve engineering speed and system visibility, • Diagnose issues across firmware, electronics, mechanical interfaces, and lab setup, • Collaborate with electronics, optics, software, and product teams to integrate embedded systems into wider prototypes, • Work hands-on in our Chiswick office and R&D lab Who You Are You are a practical, curious embedded engineer who enjoys working at the boundary between electronics and software. You are comfortable debugging real hardware, writing reliable firmware, and taking responsibility for defined technical deliverables. You are not expected to have solved every problem before, but you should be able to reason clearly, test systematically, communicate uncertainty, and make sound engineering decisions without needing constant direction. You are likely to enjoy this role if you like building things that have to work in the real world: motors that move repeatably, sensors that produce trustworthy data, rigs that stay reliable, firmware that fails predictably, and test tools that help the wider team move faster. Required Experience • 2–3 years’ industry experience in electronics, embedded systems, mechatronics, robotics, instrumentation, automation, or a related field, • Degree-level background in electronics, embedded systems, mechatronics, physics, robotics, or a related technical discipline, or equivalent practical experience, • Experience writing, testing, and debugging C/C++ for embedded systems, • Hands-on experience with microcontroller-based systems such as ESP32, STM32, Teensy, Raspberry Pi, or similar, • Experience integrating peripherals and bringing up embedded systems on real hardware, • Practical experience working with motors, encoders, sensors, or other electromechanical systems, • Understanding of precision, timing, control, and repeatability considerations in embedded systems, • Familiarity with Linux fundamentals, preferably Debian-based systems, • Ability to read schematics and support electronics bring-up using tools such as oscilloscopes, logic analysers, and multimeters, • Working knowledge of common communication protocols such as I²C, SPI, UART, or CAN, • Experience debugging across hardware and embedded software in an R&D, prototyping, robotics, instrumentation, automation, or product development environment, • Clear communication skills and the ability to collaborate effectively within a multidisciplinary engineering team Desirable Skills • Experience using electronics design tools such as KiCad, Altium, or EasyEDA, • Exposure to PCB design, schematic capture, layout, or design-for-bring-up considerations, • Exposure to digital signal processing, • Exposure to FPGA design or integration, • Familiarity with PCIe, SAS, or other high-speed serial interfaces, • Experience with Python or other high-level languages for automation, testing, data analysis, or hardware control, • Exposure to optics, photonics, imaging systems, precision instrumentation, or scientific hardware, • Experience improving reliability, maintainability, or repeatability of lab rigs or prototype platforms, • Experience working in a fast-paced R&D, prototyping, or hardware startup environment Benefits At HoloMem • Competitive salary, • 25 days annual leave, • Employer pension contributions, • Cycle-to-work scheme, • A collaborative, knowledgeable team working on deeply technical, world-positive problems How to Apply Click apply or send your CV to . Show us what you’ve designed, built, or tested. If you’re excited about the mission, even if you don’t meet every requirement, we’d love to hear from you. HoloMem is an equal opportunity employer. We value diversity and are committed to building an inclusive environment for all.

Full-time position. Onsite 5 days a week – Chiswick, London. We’re hiring a Senior Mechatronics Engineer to help deliver the motion control, sensing, and real-time system behaviour needed for the HoloDrive system. About HoloMem - At HoloMem, we’re building the next generation of mass data storage hardware; highly efficient, long life, and ultra durable. Our pioneering and patented holographic technology encodes data as light within advanced polymers, enabling a resilient and future fit alternative to today’s short lived and energy intensive data storage infrastructure. Over the past 24 months HoloMem has graduated from both the Intel Ignite and Deeptech Labs accelerators, been awarded two Innovate UK Smart Grants, closed a seed+ funding round, and most recently deployed a working HoloDrive prototype to a live data centre to prove the robustness of our system. Off the back of our breakthrough partnership with BDT, the world’s largest tape library manufacturer, we now begin the transition from prototype to product, maturing our validated system into a mass-produced technology platform that enables state of the art data storage performance at scale. We have ambitious plans, and we are now scaling up our West London based team to enable them. Join us. What You’ll Be Doing - You will work across motor control architecture, actuator selection, encoder and sensor integration, control loop tuning, test rigs, motor drivers, embedded software, and real-time system behaviour. Some motion control functions may sit close to FPGA-based hardware interfaces, including FOC, encoder processing, high-speed timing, commutation, PWM generation, synchronisation, and closed-loop control. You will not own FPGA implementation, but you should be able to reason clearly about whether an issue is coming from the control system, electronics, sensors, or mechanics. The Specifics About the Role - This role is suited to a senior mechatronics engineer who has delivered motor control in real hardware systems, and who is comfortable working across mechanical motion, electronics, embedded software, sensors, actuators, and system test. You should be able to: • Define and develop motor control approaches for precision motion in a complex electromechanical system, • Support actuator selection across stepper, servo, piezo, linear motor, or related motion technologies, • Integrate encoders, optical sensors, and other feedback mechanisms into motion control systems, • Tune and validate PID, FOC, or related control approaches for speed, position, repeatability, tension, or synchronisation, • Work with motor drivers, embedded C/C++, real-time control systems, and hardware interfaces during bring-up and integration, • Develop test rigs and measurement approaches to characterise motor behaviour, repeatability, and control stability, • Debug motion issues across mechanical, electrical, embedded software, FPGA-interface, sensing, and control system boundaries, • Document control behaviour, test results, risks, trade-offs, and engineering decisions clearly Who You Are - You are a hands-on mechatronics engineer who is comfortable where software, electronics, mechanics, and control theory meet. You understand that reliable motion control requires the right actuator, clean sensing, stable control loops, practical test methods, and disciplined debugging. You enjoy working with real hardware. You can move from control logic to oscilloscope traces, from sensor signals to mechanical behaviour, and from test results back to system-level design decisions. You communicate clearly across multi-disciplinary teams, and challenge decisions when the evidence does not support them. Required Experience - • Degree-level education in mechatronics, mechanical engineering, electrical/electronic engineering, control engineering, robotics, or a closely related discipline, • 3 – 5 years relevant industry experience developing motor control or precision motion systems in real hardware, • Hands-on experience building, testing, measuring, and improving hardware systems, • Practical judgement in balancing time, cost, specification, quality, scalability, and delivery risk Desirable Skills - • Exposure to FPGA-based motor control systems, deterministic timing, encoder processing, PWM generation, commutation, safety interlocks, synchronisation, or closed-loop control, • Ability to diagnose whether motor control issues originate in FPGA implementation, embedded software, electronics, sensing, control loop behaviour, or mechanical system behaviour, • Experience with precision media handling, tape handling, web handling, cartridge systems, or other mechanically sensitive motion systems, • Experience supporting hardware through EVT, DVT, PVT, production readiness, or launch phases, • Experience working closely with mechanical engineers on tolerance, friction, alignment, wear, or repeatability issues Benefits At HoloMem - • Competitive salary, • 25 days annual leave, • Employer pension contributions, • Cycle-to-work scheme, • A collaborative, knowledgeable team working on deeply technical, world-positive problems How to Apply - Click apply or send your CV to . Show us what you’ve designed, built, or tested. If you’re excited about the mission, even if you don’t meet every requirement, we’d love to hear from you. HoloMem is an equal opportunity employer. We value diversity and are committed to building an inclusive environment for all.

We are Europe’s largest arts centre and the UK’s fifth most visited attraction, occupying an 11-acre site that sits in the midst of London’s most vibrant cultural quarter on the South Bank of the Thames. Our focus, as a charity, is to remain innovative, bold and experimental in what we do and to be highly relevant to the artists we want to work with and to the audiences we want to attract as well as to our current and future employees. We remain committed to creating a place where as many people as possible can come together to experience bold, unusual, entertaining and eye-opening work. At this exciting time, we are seeking an outstanding Technical Services Manager who is responsible for providing technical leadership and operational management of all Mechanical, Electrical, and Plumbing (MEP) services and integrated security systems across the Southbank Centre. This includes ensuring that all MEP infrastructure and specialised security assets - including Fire Alarms, Intruder Alarms, Turbonet and CCTV - meet the highest professional standards, fully comply with statutory requirements and maintenance protocols, and support the Centre’s mission, operations, and visitor safety. We are looking for a Technical Services Manager who will play a vital role in keeping Southbank Centre safe, resilient and future‑ready. This is a leadership role for someone who thrives on responsibility, collaboration and problem‑solving, someone who understands that excellence in technical services enables extraordinary artistic experiences to happen. At Southbank Centre, technical expertise goes hand in hand with creativity, sustainability and inclusion. You’ll be trusted to lead critical building systems, support major events and capital projects, and contribute to long‑term environmental and operational strategy, all while working alongside passionate colleagues who care deeply about what we do and why we do it. The candidate brochure can be viewed at ___. For a confidential discussion please contact our advisor at The Management Recruitment Group, Connor Humpage (). Applications should consist of a comprehensive CV (of no more than 4 pages) and a covering letter (of no more than 2 pages) and should be submitted to before the closing date. Closing date for applications is Sunday 17th May 2026.

Role: Technician Start date: ASAP Contract Type: Permanent Salary: £37- 42k depending on experience Location: Wake The Tiger, London THE ROLE The Technician plays an essential role in supporting the technical team within the production department at Wake The Tiger. Working closely with the Technical Lead, the Technician will help maintain and develop a variety of complex technical systems across the park. This role involves supporting routine maintenance and taking on individual project. The Technician will bring hands-on experience across creative lighting, audio systems, interactive installations, mechanical features, and more. You will continue to develop that expertise in a unique and dynamic environment. The Technician will also be responsible for ensuring systems are operational during park hours and assisting with technical support when needed. The Technician will have the opportunity to work on assigned projects, develop their technical expertise, and be part of the team that keeps the park running smoothly. Hours are set via a rota, but flexibility and a willingness to take on overtime when needed are essential. This role requires adaptability, a proactive attitude, and a willingness to learn new tools, technologies, and processes to support the team and enhance the park. When the park is open, technicians must be available via radio to provide technical support or respond to maintenance issues during operating hours. They are also responsible for administrative tasks, including logging issues and updating O&M manuals for installations, as well as opening and closing the park. The Technician helps facilitate a safe, creative, and well-maintained environment for both the team and visitors. KEY RESPONSIBILITIES Maintenance and Technical Support • Support the team in maintaining technical systems and installations across the park., • Carry out routine maintenance, checks, and fault finding across all AV, control, and interactive systems to maintain consistent operational performance across the venue, • Play an active role in PPM (Planned Preventative Maintenance) tasks, ensuring systems such as audio, video and lighting are functioning properly. Administrative and Documentation Support • Log any technical issues and assist with the updating and maintenance of O&M manuals for installations., • Help the team maintain accurate records of repairs, updates, and any changes to the technical systems., • Support the Technical Coordinator with scheduling, purchasing materials, and tracking receipts. Health & Safety and Team Collaboration • Ensure all technical work is carried out in compliance with health and safety standards., • Work collaboratively with the team to maintain clean, organised technical areas., • Support the team in developing solutions to improve the park's technical systems and overall visitor experience. Project Work • Work on individual technical projects assigned by the Production Manager or Technical Lead, collaborating with other team members to complete tasks in a timely and efficient manner., • Assist with prototyping and testing new systems, helping to develop innovative solutions for ongoing projects., • Help with the installation, maintenance, and upgrading of technical systems and park infrastructure as needed. Support in Venue Hire • Collaborate with the Events Manager to plan and deliver technical requirements for venue hires, from initial scoping through to on-the-day delivery., • Step in to fill gaps in the rota during periods of increased venue hire demand, providing support as necessary to maintain operations., • Assist with venue setups and technical support during events, ensuring smooth operations of technical systems for venue hires. Park Operations Support • Be part of the technical team available during park operations to respond to maintenance issues and provide support., • Respond to technical issues during park hours and ensure any issues are resolved quickly to minimise disruption., • Support daily park operations by ensuring technical systems are functional and well-maintained., • Serve as the technical lead during park opening and closing, using fault-finding methods to address issues independently when necessary., • Contribute to the continuous improvement of the park by identifying opportunities for upgrades and enhancements., • Maintain accurate documentation, including fault logs, technical manuals, and maintenance records. SKILLS & EXPERIENCE Essential • Some practical experience with AV, control, or interactive technologies, with a genuine enthusiasm to develop further., • Working familiarity with some of the following: Dante audio, QSC Q-SYS, DMX and Artnet, Pharos, BrightSign or equivalent media servers., • Basic understanding of IT and networking fundamentals (VLANs, Wi-Fi, virtualisation, or NAS storage)., • Experience with creative technologies such as lighting, sound, interactive installations, or mechanical systems., • Ability to carry out fault finding and maintenance tasks under the guidance of the Technical Lead., • Strong communication skills and the ability to work effectively within a team., • Proactive approach to problem-solving with the ability to work independently when required., • Flexibility to work a rota including evenings, weekends, and additional overtime as needed., • A positive, can-do attitude and genuine desire to learn new technologies and ways of working. DIVERSITY & INCLUSION At Wake the Tiger, we prioritise inclusive and fair recruitment practices. We value diversity in all its forms and welcome candidates regardless of gender, race, ethnicity, sexual orientation, disability status, age, or religion. We are committed to creating an inclusive workplace where everyone feels valued and respected, so please let us know if you require any reasonable adjustments during the recruitment process. PRIVACY Please read our Privacy Notice describing how we may process, disclose and store your personal data if you apply for a role.

Full-time position. Onsite 5 days a week – Chiswick, London. We’re hiring a Lead Mechanical Engineer to define the mechanical tolerances, repeatability requirements, and verification methods needed for our HoloDrive system and help bring our ambitious first product to market. About HoloMem At HoloMem, we’re building the next generation of mass data storage hardware; highly efficient, long life, and ultra durable. Our pioneering and patented holographic technology encodes data as light within advanced polymers, enabling a resilient and future fit alternative to today’s short lived and energy intensive data storage infrastructure. Over the past 24 months HoloMem has graduated from both the Intel Ignite and Deeptech Labs accelerators, been awarded two Innovate UK Smart Grants, closed a seed+ funding round, and most recently deployed a working HoloDrive prototype to a live data centre to prove the robustness of our system. Off the back of our breakthrough partnership with BDT, the world’s largest tape library manufacturer, we now begin the transition from prototype to product, maturing our validated system into a mass-produced technology platform that enables state of the art data storage performance at scale. We have ambitious plans, and we are now scaling up our West London based team to enable them. Join us. What You’ll Be Doing You will take technical ownership of a critical mechanical workstream within the HoloDrive media handling system, helping ensure it can manage, position, and control media reliably from product development prototypes through EVT, DVT, PVT, and launch. You will work across requirements definition, tolerance setting, test method development, drive system integration, part sourcing, and life-test improvement. This is a senior individual contributor role: hands-on, technical, and delivery-focused, with responsibility for guiding engineers, reviewing technical quality, and coordinating with mechanical, mechatronics, and electronics workstreams. The Specifics About the Role This role is suited to an experienced mechanical engineer who has led the delivery of precision mechanical systems or critical mechanical subsystems, and who is ready to act as the technical lead for tape handling and control within a complex hardware platform: • Establish mechanical tolerances, repeatability requirements, and verification methods that support reliable system behaviour, • Develop test methods, rigs, and verification approaches for tape movement, positioning, and repeatability, • Reduce technical risk around tape positioning, tape path control, and the mechanical interfaces that affect system repeatability, • Support the first integration of the drive system, identifying mechanical risks early and resolving them through structured build and test work, • Improve life-test methods so tape management behaviour can be assessed over meaningful operating conditions, • Peer review mechanical designs, test plans, and verification evidence for technical quality, • Guide engineers technically without relying on formal line management authority Who You Are You are a mechanically grounded engineer who is comfortable working close to the hardware. You understand that reliable mechanical systems need clear requirements, measurable tolerances, controlled interfaces, practical test methods, and disciplined verification. You enjoy problems where motion, material handling, system integration, and quality interact. You can bring structure to ambiguity, expose what is not yet known, and help the wider team converge on testable engineering decisions. You communicate clearly, challenge constructively, and raise the technical standard of the work around you. Required Experience • Degree-level education in mechanical engineering or a closely related discipline, • Around 8 years of relevant industry experience in mechanical engineering, mechanical systems, or precision hardware development, • Experience leading the delivery of mechanical systems, subsystems, or significant mechanical workstreams, • Experience integrating mechanical systems beyond isolated component design, • Experience defining mechanical requirements, tolerances, repeatability requirements, and verification methods, • Experience setting quality requirements for mechanical systems, not only performance targets, • Hands-on experience building, testing, debugging, and improving mechanical hardware, • Familiarity with mechanical failure modes linked to wear, alignment, tension, friction, or material handling, • Experience working with cross-functional engineering teams during system integration, • Ability to document technical requirements, test methods, risks, trade-offs, and engineering decisions clearly, • Exposure to production environments, supplier coordination, or manufacturing-oriented design decisions, • Strong communication skills, including the ability to guide others through technical reasoning, • Practical judgement in balancing time, cost, specification, quality, scalability and delivery risk Desirable Skills • Experience handling thin materials, films, webs, tapes, or other mechanically sensitive media·, • Background in precision mechanical systems, motion control, alignment, or positioning mechanisms, • Experience supporting hardware through EVT, DVT, PVT, production readiness, or launch phases, • Previous involvement in quality assurance, reliability, or verification leadership for mechanical systems, • Experience collaborating closely with mechatronics, electronics, firmware, or controls engineers during system development Benefits At HoloMem • Competitive salary, • 25 days annual leave, • Employer pension contributions, • Cycle-to-work scheme, • A collaborative, knowledgeable team working on deeply technical, world-positive problems How to Apply Click apply or send your CV to . Show us what you’ve designed, built, or tested. If you’re excited about the mission, even if you don’t meet every requirement, we’d love to hear from you. HoloMem is an equal opportunity employer. We value diversity and are committed to building an inclusive environment for all.

Be part of the Smart Team! We have an exciting opportunity for an enthusiastic Electrical Maintenance Supervisor to join our team! About Us: At SMART, we help lead organisations across the UK to keep their facilities running safely, efficiently, and sustainably. We deliver a client-focused approach to deliver reliable, planned and reactive maintenance with a strong focus on quality, technical expertise, and customer service. We’re proud to be an employer that values career progression. We offer structured training and clear progression routes to help you build a rewarding engineering career. Role Purpose: As an Electrical Maintenance Supervisor, you will ensure all relevant works are carried out on electrical and mechanical systems (PPM and reactive maintenance), liaise and book in contractors, troubleshoot / fault find on systems, liaise with the client and respond to their needs. As an Electrical Maintenance Supervisor, you must be fully qualified in Electrical Installations / Engineering (C&G/EAL/NVQ or equivalent), at least 5 years experience working within commercial maintenance, and a good understanding of commercial M&E systems. Electrical Maintenance Supervisor Duties: • PPMs & Reactive maintenance, • Single and Three Phase Power, Motors, Generators (on/off load tests), UPS, LV/HV switching, Shutdowns, Switchgear, Motors, Emergency Lighting, Fire Alarm Test, AHUs, FCUs, VAVs, CRAC units, Sprinkler Systems, Pumps, Belts, Bearings, Seals, BMS Operation, • Carry out isolation of plant and systems in accordance with safety requirements., • Ensure corrective/repair works are carried out in accordance with regulations., • Endorse safe working practices, quality standards conformity and best practice methods., • Organising subcontractors, • Completing logbooks and RAMS, • Reports, • Conducting client meetings, • Ensuring the account manager is kept up to date on a regular basis, • Liaising with client representatives in respect of corrective repair works., • Permits to work, • Raise and close jobs on PDA's as necessary. Electrical Maintenance Supervisor Requirements: • City & Guilds / NVQ (or equivalent) qualification in Electrical Installations / Engineering, • Building Services Maintenance experience, • Career driven and motivated, • Polite and personable

Join the RAC as a Roadside Technician!\n Become a vital part of the team that keeps the UK moving! As a Roadside Technician, you’ll enjoy: \n\n • \nA competitive base salary of £35,000 with a realistic OTE of £60,000. Top performers can earn even more through bonuses and enhanced overtime rates!\n, • Sheffield\n, • A Level 2 light vehicle maintenance qualification (or equivalent) with proven technical, electrical, and diagnostic experience.\n, • A customer-focused approach.\n, • Your own RAC van\n, • A fuel card\n, • Full uniform\n, • \nStrong base pay: £35,000 with a realistic OTE of £60,000, plus opportunities for bonuses and enhanced overtime rates.\n, • \nShare in our success: Join our colleague share scheme for free to benefit from the future growth of the business.\n, • \nFree RAC Ultimate breakdown cover: From your very first day.\n, • \nCar salary sacrifice scheme: Includes electric vehicle options (after 12 months) to help you save on tax.\n, • \nGenerous holidays: 23 days plus bank holidays (rising to 25 with service).\n, • \nPension & life cover: Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits).\n, • \nWellbeing support: 24/7 confidential support helpline for you and your family.\n

Join the RAC as a Roadside Technician!\n Become a vital part of the team that keeps the UK moving! As a Roadside Technician, you’ll enjoy: \n\n • \nA competitive base salary of £35,000 with a realistic OTE of £60,000. Top performers can earn significantly more through bonuses and enhanced overtime rates!\n, • \nStart and finish your day on your driveway! Enjoy demand-led shifts averaging 40 hours per week, with optional overtime available.\n\n\nExciting Opportunities Await in Yorkshire and The Humber:\n\n, • Sheffield\n, • A Level 2 light vehicle maintenance qualification (or equivalent), along with proven technical, electrical, and diagnostic experience.\n, • A customer-focused approach that puts our members first.\n, • Your own RAC van\n, • Fuel card\n, • Full uniform\n, • \nStrong base pay – £35,000 with a realistic OTE of £60,000, plus bonuses for top performers.\n, • \nShare in our success – Join our colleague share scheme for free and benefit from the future growth of the business.\n, • \nFree RAC Ultimate breakdown cover – From your very first day!\n, • \nCar salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax.\n, • \nGenerous holidays – 23 days plus bank holidays (rising to 25 with service).\n, • \nPension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits).\n, • \nWellbeing support – 24/7 confidential support helpline for you and your family.\n, • \nYou’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. You stay calm under pressure and confident in your craft.\n, • \nYou thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery. No two jobs are the same!\n

Join the RAC as a Roadside Technician\n\n Are you ready to be part of a team that keeps the UK moving? As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equivalent) and at least 2 years of experience, you’ll enjoy: \n\n\n • \nCompetitive Salary: A base salary of £36,400 with a realistic OTE of £61,000. Top performers can earn significantly more through bonuses and enhanced overtime rates.\n, • Deliver expert mechanical roadside repairs and vehicle diagnostics.\n, • Provide emergency breakdown support across the UK.\n, • Handle a variety of challenges, from flat batteries to complex fault-finding.\n\n\nWhat You’ll Need\n\n, • A Level 2 light vehicle maintenance qualification (or equivalent) with at least 2 years of post-qualification technical, electrical, and diagnostic experience.\n, • A customer-focused approach.\n, • Your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit.\n, • A strong base pay and realistic OTE.\n, • Free RAC Ultimate breakdown cover from your very first day.\n, • Generous holidays: 23 days plus bank holidays (rising to 25 with service).\n, • Pension & life cover: Up to 6.5% matched pension contributions and life cover up to 4x your salary.\n, • Wellbeing support: 24/7 confidential support helpline for you and your family.\n, • \nProblem Solver: A people person and proud ambassador for the RAC.\n, • \nAdaptable Technician: Thriving on variety, tackling everything from diagnostics to flat tyres.\n

Join the RAC as a Roadside Technician!\n Become a vital part of the team that keeps the UK moving! As a Roadside Technician, you’ll enjoy: \n\n • \nA competitive base salary of £35,000 with a realistic OTE of £60,000. Top performers can earn even more through bonuses and enhanced overtime rates!\n, • Sheffield\n, • A Level 2 light vehicle maintenance qualification (or equivalent) with proven technical, electrical, and diagnostic experience.\n, • A customer-focused approach.\n, • Your own RAC van\n, • A fuel card\n, • Full uniform\n, • \nStrong base pay: £35,000 with a realistic OTE of £60,000, plus opportunities for bonuses and enhanced overtime rates.\n, • \nShare in our success: Join our colleague share scheme for free to benefit from the future growth of the business.\n, • \nFree RAC Ultimate breakdown cover: From your very first day.\n, • \nCar salary sacrifice scheme: Includes electric vehicle options (after 12 months) to help you save on tax.\n, • \nGenerous holidays: 23 days plus bank holidays (rising to 25 with service).\n, • \nPension & life cover: Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits).\n, • \nWellbeing support: 24/7 confidential support helpline for you and your family.\n

Join the RAC as a Roadside Technician!\n Become a vital part of the team that keeps the UK moving! As a Roadside Technician, you’ll enjoy: \n\n • \nA competitive base salary of £35,000 with a realistic OTE of £60,000. Top performers can earn significantly more through bonuses and enhanced overtime rates!\n, • \nStart and finish your day on your driveway! Enjoy demand-led shifts averaging 40 hours per week, with optional overtime available.\n\n\nExciting Opportunities Await in Yorkshire and The Humber:\n\n, • Sheffield\n, • A Level 2 light vehicle maintenance qualification (or equivalent), along with proven technical, electrical, and diagnostic experience.\n, • A customer-focused approach that puts our members first.\n, • Your own RAC van\n, • Fuel card\n, • Full uniform\n, • \nStrong base pay – £35,000 with a realistic OTE of £60,000, plus bonuses for top performers.\n, • \nShare in our success – Join our colleague share scheme for free and benefit from the future growth of the business.\n, • \nFree RAC Ultimate breakdown cover – From your very first day!\n, • \nCar salary sacrifice scheme – Includes electric vehicle options (after 12 months) to help you save on tax.\n, • \nGenerous holidays – 23 days plus bank holidays (rising to 25 with service).\n, • \nPension & life cover – Up to 6.5% matched pension contributions and life cover up to 4x your salary (10x with flex benefits).\n, • \nWellbeing support – 24/7 confidential support helpline for you and your family.\n, • \nYou’re more than a mechanic. You’re a problem solver, a people person, and a proud ambassador for the RAC. You stay calm under pressure and confident in your craft.\n, • \nYou thrive on variety. One moment it’s fault diagnostics, the next it’s a flat tyre or battery. No two jobs are the same!\n

Join the RAC as a Roadside Technician\n\n Are you ready to be part of a team that keeps the UK moving? As a Roadside Technician with a Level 2 Light Vehicle Maintenance qualification (or equivalent) and at least 2 years of experience, you’ll enjoy: \n\n\n • \nCompetitive Salary: A base salary of £36,400 with a realistic OTE of £61,000. Top performers can earn significantly more through bonuses and enhanced overtime rates.\n, • Deliver expert mechanical roadside repairs and vehicle diagnostics.\n, • Provide emergency breakdown support across the UK.\n, • Handle a variety of challenges, from flat batteries to complex fault-finding.\n\n\nWhat You’ll Need\n\n, • A Level 2 light vehicle maintenance qualification (or equivalent) with at least 2 years of post-qualification technical, electrical, and diagnostic experience.\n, • A customer-focused approach.\n, • Your own RAC van, fuel card, full uniform, essential tools, and diagnostic kit.\n, • A strong base pay and realistic OTE.\n, • Free RAC Ultimate breakdown cover from your very first day.\n, • Generous holidays: 23 days plus bank holidays (rising to 25 with service).\n, • Pension & life cover: Up to 6.5% matched pension contributions and life cover up to 4x your salary.\n, • Wellbeing support: 24/7 confidential support helpline for you and your family.\n, • \nProblem Solver: A people person and proud ambassador for the RAC.\n, • \nAdaptable Technician: Thriving on variety, tackling everything from diagnostics to flat tyres.\n

We're looking for a Multi Skilled Engineer to join our Greenwich Care Homes team based in London. \n Location: Mobile across Greenwich Care Homes (London) \n Hours: 40 hours per week \n We are unable to offer certificates of sponsorship to any candidates in this role \n Join Kier Places Workplace Solutions as a Mobile Multi Skilled Engineer working across our Greenwich Care Homes portfolio. In this permanent position, you'll provide essential maintenance support across multiple care home locations, ensuring our buildings remain safe, functional, and welcoming environments for residents and staff alike. \n What will you be responsible for? \n As a Multi Skilled Engineer, you'll be working within the Facilities Management team, supporting them in maintaining operational excellence across our care home facilities. Your day to day will include: \n\n • Performing planned preventative maintenance and compliance tasks including Legionella testing\n, • Diagnosing and repairing faults across building systems including HVAC, electrical installations, and plumbing\n, • Undertaking fabric maintenance including carpentry, painting, and general repairs\n, • Supporting small refurbishment projects and coordinating with sub-contractors\n, • You hold electrical qualifications (Level 3 in Electrical Installations, C&G 236, 2391-52, or 18th Edition)\n, • You have experience in multi-skilled maintenance across mechanical and fabric work\n, • You're comfortable using digital devices to update work records\n, • You enjoy collaborative problem-solving and working as part of a supportive team\n

We're looking for a Senior Electrical Supervisor to join our Kier Mechanical & Electrical team based across the UK. \n Location: Wandsworth, London Hours: Full-time - some flexibility on hours available if desired, just let us know when you speak to us. \n We are unable to offer certificates of sponsorship to any candidates in this role. \n Join our talented team at Kier Mechanical & Electrical (KME), where you'll play a vital role in delivering exceptional mechanical and electrical services across a range of exciting projects. As an Electrical Supervisor, you'll be part of a collaborative environment that values your expertise and supports your professional growth. This is an excellent opportunity to take ownership of electrical installations whilst working alongside a supportive team dedicated to achieving excellence. \n What will you be responsible for? \n As a Senior Electrical Supervisor, you'll be working within the KME team, supporting them in delivering safe, compliant, and high-quality electrical installations. Your day to day will include: \n\n • Leading electrical installations and ensuring all works are carried out safely in line with Kier standards and UK regulations\n, • Coordinating with Project Managers and Engineers to deliver projects on time and to specification\n, • Managing quality control procedures and maintaining accurate records of site progress\n, • Guiding and supporting other supervisors and operatives to achieve project goals\n, • You hold a relevant industry accredited qualification in Electrical Services\n, • You have CSCS and SMSTS accreditation\n, • You possess strong technical knowledge of electrical installations and safety standards\n, • You're an excellent communicator who thrives in collaborative team environments\n

M&E Quantity Surveyor - London We are currently working with a prestigious client who are looking for 2 Mechanical and Electrical M&E Quantity Surveyors to join their expanding commercial team due to their full order book on projects within the Schools, Hospitals and Airports sectors based in LondonRemuneration:£45 000 - £55 000 per annum plus car/car allowance & benefits Location:LondonThe role:The successful applicants will have experience within Mechanical and Electrical construction projects using either JCT or NEC contractsRequirements:- Electrical background beneficial - NEC or JCT Contracts- Enthusiastic approach to their work If you are interested please contact John Baker or Kat Oxlade --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Drive multidisciplinary MEP design for high-profile mission-critical facilities. Your new company We are partnering with a highly respected, global engineering consultancy to appoint a Design Manager (MEP) for Data Centres, based in London. This is a career-defining opportunity to lead multi-disciplinary design delivery across some of the UK and Europe’s most complex, high-profile mission-critical facilities. In this role, you’ll act as the primary design lead for major data centre programmes, driving technical excellence, setting design direction, and ensuring seamless delivery from concept through to handover. Your new role As Design Manager, you will take ownership of end-to-end MEP design delivery on large-scale data centre projects, working across mechanical, electrical, controls/BMS, sustainability and wider building-services disciplines. You will: • Lead and coordinate multidisciplinary MEP design teams throughout the full project lifecycle, • Manage programme, cost, risk and quality, ensuring all deliverables meet technical and commercial objectives, • Oversee key documentation including design reports, specifications, risk registers and change logs, • Facilitate design reviews, client workshops and technical meetings, • Support procurement, testing, commissioning and post-handover activities, • Degree in Mechanical or Electrical Engineering (or equivalent), • Chartered Engineer status preferred or actively working towards, • 7-12 years managing MEP design on data centres or other mission-critical facilities, • Strong technical understanding of:, • UPS systems, standby generation, LV/MV distribution, earthing, batteries, • CRAC/CRAH, chilled water systems, pumping, control/BMS strategies, • Demonstrated ability to coordinate multidisciplinary engineering teams, • Experience managing clients, contractors, architects and stakeholders on complex programmes, • Opportunity to lead flagship data centre projects with a global consultancy, • Supportive, high-performance culture with strong career progression pathways, • Exposure to cutting-edge engineering challenges in one of the fastest-growing sectors

Educational Institution are hiring for a Senior Facilities Manager Your new company You will be joining a prestigious, high-profile educational and cultural institution based in central London. The organisation operates in a vibrant, public-facing environment with multiple buildings, busy footfall, and a year-round schedule of events, performances, and community activity. With a strong commitment to excellence, safety, and an exceptional user experience, the organisation places its Estates team at the heart of its operations. You’ll be part of a dedicated professional community that supports students, staff, and thousands of visitors each year. Your new role As Senior Facilities Manager, you will be responsible for the smooth day-to-day running of all operational estates services across several sites. Reporting into the Director of Finance, you will manage a broad remit including building maintenance, security, soft services, health & safety, and contractor management.You will lead operational teams, set clear priorities, and ensure exceptional service delivery across the estate. Key responsibilities include: • Delivering the Estates strategy and overseeing all operational activity., • Managing hard and soft service providers, ensuring SLA and KPI performance and driving continuous improvement., • Overseeing all security operations-including access control, key management, CCTV, and out-of-hours incident response., • Working closely with the Health & Safety Manager to ensure compliance and robust risk management., • Managing contracts across mechanical, electrical, fire services and other critical building systems., • Maintaining asset registers and operational documentation., • Leading and monitoring project work within the Estates remit., • Significant experience in Estates or Facilities Management, ideally in a public-facing environment., • Strong leadership skills with proven experience managing large, multi-disciplinary teams., • Excellent communication, organisation, and the ability to remain calm under pressure., • Experience managing contractors, suppliers, and outsourced teams., • Ability to prioritise, make quick decisions, and take ownership of issues from start to finish., • Good Microsoft Office skills, particularly Excel., • Strong technical understanding of building operations and maintenance., • A customer-focused approach with the ability to work effectively with people at all levels., • A good general education, including GCSE Maths and English (A-C or equivalent)., • Health & Safety knowledge (IOSH/NEBOSH desirable)., • IWFM or degree-level FM qualification (desirable).Desirable:, • Listed building knowledge, • Maintenance experience, • Experience in Higher Education or performing arts venues, • Procurement and change management experience, • AutoCAD LT skills, • A collaborative, supportive working culture, • Opportunities for professional development, • Exposure to unique and dynamic estates challenges, • The chance to work in a vibrant environment that hosts hundreds of public events each yearThis is an excellent opportunity for an experienced facilities professional looking to make a real impact in a high-profile London setting. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. 4765746

An established, international MEP design consultancy is seeking a Senior Mechanical Engineer to join their growing London team. With a strong global footprint and a reputation for delivering high-quality, technically complex projects, this organisation operates across multiple sectors, with a particular focus on mission-critical and data centre developments. This is an excellent opportunity for an experienced engineer to play a key role in delivering innovative building services solutions on large-scale, global projects. As a Senior Mechanical Engineer, you will take a leading role in project delivery, providing technical expertise, design input, and client-focused solutions. You’ll work within a multidisciplinary environment, supporting both project execution and the development of junior engineers. Key Responsibilities: • Support the successful delivery of project objectives through technical input and engineering expertise, • Collaborate with multidisciplinary teams to ensure high-quality, timely project delivery, • Prepare specifications, drawings, and contract documentation in line with relevant standards, • Deliver mechanical building services designs from concept through to completion, • Ensure projects are delivered within budget and programme constraints while maintaining technical quality, • Provide mechanical design solutions across a range of building and infrastructure projects, • Manage scope and design changes in line with project controls and client requirements About You: • Degree-qualified in Mechanical Building Services Engineering (or equivalent), • Demonstrable experience operating at Senior Engineer level, • Strong technical expertise in mechanical building services design, • Experience in data centres or mission-critical environments is highly desirable, • Knowledge of related disciplines such as fire engineering, acoustics, and building modelling, • Chartered status (or working towards) with a relevant professional body (e.g. CIBSE), • Proficiency in tools such as AutoCAD, Revit, Navisworks, IES, Hevacomp, CFD software, and Microsoft Office, • Excellent communication, coordination, and problem-solving skills What’s on Offer: • Work on high-profile, international data centre projects, • Collaborative, supportive, and forward-thinking team environment, • Clear career progression within a growing global consultancy, • Competitive salary and benefits package If you’re looking to take the next step in your career and work on globally recognised data centre projects, we’d be keen to hear from you.

Dalkia Engineering is experiencing strong growth in the South Region, with newly awarded live construction projects across central London, including flagship sites such as the British Museum, Charing Cross Hospital and Hammersmith Hospital. We are now looking to appoint a Electrical Project Engineer to support the successful delivery of complex electrical installations across these industry‑leading buildings. This role offers an excellent opportunity to develop your technical and project engineering capability while working on high‑profile, technically demanding projects. Working under the direction of the Project Manager and Senior Project Engineer, you will support and coordinate technical compliance throughout the full project lifecycle — from design development and procurement through to installation, testing and commissioning. The role plays a key part in ensuring works are delivered in line with the project brief, specifications, statutory requirements and the Building Safety Act. Key responsibilities / outcomes • Coordinate and review electrical design information, raising RFIs and technical queries to ensure compliance., • Support the delivery of electrical procurement packages, including technical evaluations and tracking of deliveries., • Review electrical shop drawings, technical submittals and method statements, making recommendations for approval., • Monitor electrical works against the programme, identifying potential delays or constraints., • Support and monitor onsite electrical installations, checking workmanship and conformity to specifications and standards., • Assist with electrical material take‑offs and procurement schedules., • Support BIM coordination activities and assist with electrical clash detection and resolution., • Support the implementation of health & safety requirements, including input into RAMS., • Maintain accurate QA/QC documentation, including inspections, test records and NCRs., • Coordinate and support electrical testing and commissioning activities under senior supervision., • Provide technical input to support commercial variation assessments. About you You will be an organised and technically curious engineer with a strong interest in delivering high‑quality electrical installations within complex buildings. You enjoy working collaboratively and are keen to learn and develop within a structured project environment. You will bring: • Strong communication skills, with the ability to explain technical issues clearly and work effectively across electrical and mechanical teams., • Good organisational and time‑management skills, with the ability to manage multiple tasks, deadlines and priorities., • A practical problem‑solving mindset, able to analyse issues and propose workable solutions., • High attention to detail when reviewing drawings, specifications, installations and commissioning activities., • A proactive attitude to learning new technologies, standards and regulations., • Experience in M&E Building Services. Qualifications Essential: • HNC / HND in Electrical or Building Services Engineering, • Degree in Electrical or Building Services Engineering, • SSSTS or SMSTS, • Experience using Navisworks and/or Revizto

SUPPORT ENGINEER (MECHANICAL) UK / REMOTE / HOME BASED BASE SALARY £25-31,500 DOE With locations based close to both London and Edinburgh, Grw Talent’s client has over 20 years of experience designing and delivering highly complex automated storage equipment and managing full turnkey projects from design through to installation, commissioning and through-life support; for clients in a variety of industries. The business is expanding into new geographies, new customers and developing new technologies. They now need to make the key hire of a Support Engineer to join an existing team. The Technical Support team typically work from home / remote. We will look at candidates based remotely across the UK as long as able to travel when needed. Our client provides 24/7 remote technical support to their customers. The Customer Support Technical Support Team works across mainly day and back shifts, some night shifts and weekend cover. Weekly contracted hours are 37.5. Reporting to the Head of Technical Support, the Support Engineer will take responsibility for triaging a range of machine hardware and software faults, working to resolve them remotely and at times onsite, as well as support customer training and supporting in-field proactive and reactive maintenance. Key responsibilities include: • Converse with the clients and establish their issues while acting to maintain the reputation of our company in a courteous and efficient manner., • Working to resolve both mechanical and software machine issues via a remote connection., • Utilising your skills to triage multiple jobs as they come in ensuring that the most pressing are dealt with first., • Reporting persistent issues or breakdowns through the appropriate channels, ensuring a thorough and accurate description of the issue is given., • Working from home – you must be able to focus while on shift to provide our clients with fast and efficient service., • Travel to various sites around the country and across the world to carry out work on the various machines they support., • Servicing of the machines to ensure smooth operation and the decreased likelihood of breakdowns., • Attending breakdowns to provide safe and thorough repairs to machines, getting them back online as soon as possible., • Training of clients so that they can operate their machinery safely and avoid any mistakes being made that could lead to breakdowns. The ideal candidate is educated to HNC level or time served in an engineering discipline – mechanical engineering preferred. Given that solid training is provided we are open to entry level candidates who want to build a career in field / customer service engineering. Candidates will need to show good capability in working through and resolving technical problems; both hardware and software. You will need to be highly PC / tech literate (especially in Microsoft Windows). We would love to hear from candidates with previous field service or remote engineering product support experience. A customer facing and polished personality is required, and this role will suit candidates who enjoy hands-on problem solving and practical projects in their spare time, such as building, repairing, or experimenting with equipment or technology. Additional requirements: a stable and reliable internet connection; ability to travel within and outside of the UK; driving license preferred. The pace and variety contained in this role make it super interesting and you will learn lots, inside an excellent team. Working largely remote with some occasional travel is a major plus. Your base salary of £25-31.5k DOE is backed up with a competitive benefits package including a company bonus scheme, and paid expenses when travelling. To apply for this role please send your resume and reach out to Katie Hydes from Grw Talent or apply via LinkedIn.

Build the Difference. Shape Performance. Accelerate Innovation. In Formula 1, performance isn’t just designed—it’s built, tested, refined, and pushed to the limit. This is where you come in. We are looking for a highly skilled Model Maker to play a critical role in the development of cutting-edge aerodynamic models. Your work will directly influence wind tunnel testing and, ultimately, on-track performance. Working at the intersection of precision engineering and rapid innovation, you will transform complex designs into high-quality physical components that help unlock performance gains measured in milliseconds. What You’ll Be Responsible For Precision Model Construction • Assemble and prepare high-performance wind tunnel models and components in line with the aerodynamic development programme., • Deliver exceptional quality parts and assemblies, ensuring accuracy, repeatability, and performance., • Take ownership of day-to-day model shop activities, executing tasks with precision and a strong attention to detail. Aerodynamic Development Support • Collaborate closely with Aerodynamicists, Model Design, Mechanical Design, and Additive Manufacturing teams to deliver components for wind tunnel testing., • Support the continuous evolution of the wind tunnel programme, ensuring parts are delivered on time and to the highest standard., • Work with internal teams to coordinate testing schedules and priorities, ensuring seamless execution. Innovation & Continuous Improvement • Contribute to the exploration of new technologies, materials, and manufacturing techniques., • Identify opportunities to improve processes, efficiency, and build quality., • Bring a proactive, solution-focused mindset to every challenge. Planning & Delivery • Manage your workload to meet tight deadlines and shifting priorities., • Ensure all components are delivered on time and ready for test, without compromising quality., • Maintain clear and timely communication on progress, risks, and deliverables. Team Contribution & Culture • Build strong working relationships across teams, contributing to a collaborative and high-performance environment., • Promote a positive, professional attitude, supporting both team success and continuous improvement., • Be flexible in your approach, including shift work and weekend support when required to meet programme demands. What You Bring Technical Expertise • Experience in automotive or high-performance engineering (F1 experience highly desirable)., • Strong understanding of precision manufacturing and model assembly techniques., • Good working knowledge of mechanical systems and component integration. Professional Skills • Ability to work independently and scope tasks with minimal supervision., • Comfortable operating under pressure and tight timelines., • Excellent attention to detail and commitment to delivering high-quality output. Mindset • Hands-on, proactive, and driven by results., • Flexible and adaptable to changing demands and fast-paced environments., • A team player with a “can-do” attitude and a focus on continuous improvement. Why This Role Stands Out Every component you build contributes directly to performance on track. Your craftsmanship, precision, and speed will play a vital role in shaping aerodynamic gains at the highest level of motorsport. If you take pride in building world-class components and want to see your work translated into real performance, this is your opportunity.

BakerHicks is seeking expressions of interest from Civil and Structural Engineers on various levels with experience in the power sector to support a growing portfolio of complex and high-impact projects. This is an opportunity to be part of multidisciplinary teams delivering critical infrastructure that supports the energy transition. About the role You will contribute to the design and delivery of civil and structural solutions across a range of power sector projects, working closely with electrical, mechanical, and project delivery teams. Projects span from early feasibility through to detailed design and construction support. Key responsibilities include: • Civil and structural design for substations, including foundations and steel structures, • Design of cable routes, trenches, and ducting systems, • Site development works including earthworks and drainage, • Structural assessment and retrofit of existing assets, • Design for safe and practical construction, including work in live environments, • Collaboration with multidisciplinary teams to deliver integrated solutions Project exposure includes: • Substation new builds, upgrades, and extensions, • Grid infrastructure and resilience programmes, • Renewable energy integration including wind, solar, and battery energy storage systems, • Data centre power infrastructure, • Industrial electrification and decarbonisation About you: • Degree qualified in Civil or Structural Engineering, • Experience in the power sector or related infrastructure, • Familiar with relevant design standards and best practice, • Strong communication and teamwork skills If you are interested in exploring opportunities with BakerHicks in London or Manchester, we would welcome your expression of interest. BakerHicks has been delivering excellence in engineering, design, and project delivery since 1957. With 14 offices across the UK and Europe, we offer you the chance to work on meaningful projects that enhance communities and contribute to sustainable growth. Many of the positions within our company are subject to security clearance. This means that your eligibility for certain roles may be affected by various factors. The successful candidate must be able to achieve and maintain security clearance for this role as required by our clients and sectors. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (___) About BakerHicks We’ve been innovating in design, engineering and project delivery since 1957 and operate from 14 locations for a truly European reach. For more about our company story, see: ___. BakerHicks. A ___ company. Benefits Whatever your discipline, you’ll be alongside some of the most talented people in the industry. Our network of offices are appealing, friendly and comfortable spaces, easily accessible by car or public transport. And our salary and benefits packages are some of the best in the industry. What you get will depend on what you do, with individual performance-related rewards also on offer in addition to: • Company car or cash allowance, • Up to 6% matched contributory pension plan, • Life assurance scheme, • 25 days annual leave plus ability to buy additional leave, • Discount scheme (including gym membership, mobile phones etc), • Flexible/hybrid working, • Family friendly policies, • Employee assistance, • Professional development BakerHicks is an equal opportunity employer. We care about creating an inclusive atmosphere and are committed to promoting diversity and inclusion throughout. BakerHicks is an inclusive organisation welcoming talent from all backgrounds. Applicants are assessed on the basis of personal merit and qualifications.

Principal or Associate Fire Engineer Glasgow, Bristol, Manchester or London Competitive salary + benefits We have an exciting opening for a Principal or Associate Fire Engineer to join our firm in our Glasgow, Bristol, Manchester or London offices. About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Hoare Lea’s Fire Engineering group is a leading team of experienced fire safety specialists, many Chartered through the Institution of Fire Engineers. As part of one of the UK’s largest building engineering consultancies we collaborate with top engineers, access advanced technical resources, and work on major, high‑profile projects—while also delivering standalone fire engineering commissions and maintaining long‑term client relationships. Notable projects include Heathrow Terminal 2, Doha Metro, the £1bn Elephant & Castle redevelopment, the ExCeL extension, the Royal Hospital for Children and Young Persons (Edinburgh), seven of Manchester’s ten tallest buildings (including the UK’s tallest residential tower), several major UK airport terminals and two World Cup stadia. We invest heavily in research and testing—covering computational modelling, emerging risks and novel techniques—and recently led two of the world’s largest CLT compartment fire tests to validate a sustainable timber office design. Training and professional development are central to our culture: weekly internal sessions, regular away‑days and access to external events support career growth and CEng attainment. Our team’s diverse background includes ex‑fire service, building control and specialists in physics, mechanical/chemical engineering, materials science and forensics. We are active in SFPE, the Smoke Control Association, BSI and the Institution of Fire Engineers. Why join us? • World‑class fire engineering on high‑quality, varied projects., • Strong client repeat business and long‑term relationships., • Exceptional training and a clear route to Chartered status., • Flexible working and generous benefits (including a 9‑day fortnight option)., • A supportive, inclusive team culture with regular socials. About the role • Join Hoare Lea’s Fire Engineering team to deliver fire safety design for buildings across the UK (with occasional international projects)., • Collaborate within multi‑disciplinary project teams and manage long‑term external client relationships., • Apply detailed knowledge of UK fire regulations and design guidance to produce compliant, practical solutions., • Integrate fire engineering requirements with other construction disciplines to achieve coordinated designs., • Maintain clear, timely communication across teams, incorporating and acting on feedback., • Represent the fire team at design workshops, client meetings and site visits., • Travel to client sites and project locations in the UK, and occasionally abroad, as project needs dictate., • Use fire‑modelling and analysis tools (evacuation, smoke, heat radiation and structural fire models) to support design decisions. What we are looking for • Proven experience in a fire engineering consultancy or related fire safety role., • Relevant degree or equivalent qualification in Engineering, Building Services, Architecture, Physics, Maths or similar, with strong technical knowledge in fire safety design., • Practical experience with fire modelling / analysis software., • Excellent verbal and written communication skills and a collaborative approach to team working., • Strong organisational skills, ability to prioritise and deliver to tight deadlines., • Professionalism, attention to detail and commitment to high‑quality client service. How to apply To apply simply complete a CV profile and submit your application, or for further information please contact . If shortlisted, one of our recruitment team will be in touch to arrange a introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Fire Engineer or Senior Fire Engineer Glasgow, Bristol, Manchester or London Competitive salary + benefits We have an exciting opening for a Fire Engineer or Senior Fire Engineer to join our firm in our Glasgow, Bristol, Manchester or London offices. Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Hoare Lea’s Fire Engineering group is a leading team of experienced fire safety specialists, many Chartered through the Institution of Fire Engineers. As part of one of the UK’s largest building engineering consultancies we collaborate with top engineers, access advanced technical resources, and work on major, high‑profile projects—while also delivering standalone fire engineering commissions and maintaining long‑term client relationships. Notable projects include Heathrow Terminal 2, Doha Metro, the £1bn Elephant & Castle redevelopment, the ExCeL extension, the Royal Hospital for Children and Young Persons (Edinburgh), seven of Manchester’s ten tallest buildings (including the UK’s tallest residential tower), several major UK airport terminals and two World Cup stadia. We invest heavily in research and testing—covering computational modelling, emerging risks and novel techniques—and recently led two of the world’s largest CLT compartment fire tests to validate a sustainable timber office design. Training and professional development are central to our culture: weekly internal sessions, regular away‑days and access to external events support career growth and CEng attainment. Our team’s diverse background includes ex‑fire service, building control and specialists in physics, mechanical/chemical engineering, materials science and forensics. We are active in SFPE, the Smoke Control Association, BSI and the Institution of Fire Engineers. Why join us? • World‑class fire engineering on high‑quality, varied projects., • Strong client repeat business and long‑term relationships., • Exceptional training and a clear route to Chartered status., • Flexible working and generous benefits (including a 9‑day fortnight option)., • A supportive, inclusive team culture with regular socials. About the Role Join Hoare Lea’s Fire Engineering team to deliver fire safety design for buildings across the UK (occasional international projects). We work as part of multi‑disciplinary project teams and maintain a significant portfolio of long‑term external clients. Our work requires strong technical knowledge of UK regulations and design guidance, excellent collaboration with other construction professionals, and clear, timely communication across project teams. Key responsibilities • Deliver and/or lead fire safety design outputs: strategies, calculations, reports and drawings that comply with UK regulations and client requirements., • Coordinate fire requirements with multidisciplinary teams to produce integrated designs., • Attend and represent the fire team at design workshops, client meetings, site visits and design team meetings; communicate progress and act on feedback., • Apply fire‑modelling and analysis tools (evacuation, smoke, heat‑radiation, structural fire) to support design decisions., • Travel to client or project sites in the UK and occasionally internationally as required., • Lead technical delivery on medium to large projects and act as primary client contact., • Provide technical review, quality assurance and sign‑off of junior engineers’ work; mentor and develop team members., • Manage stakeholder expectations, workloads and project risks; contribute to business development and repeat client relationships., • Use advanced modelling/analysis to resolve complex design challenges. About you • Consultancy experience in fire engineering or a closely related fire safety role., • Degree or equivalent qualification in Engineering, Building Services, Architecture, Physics, Maths or similar., • Working knowledge of fire‑modelling/analysis software., • Strong technical understanding of fire safety principles and UK design guidance., • Excellent verbal and written communication and a collaborative approach to teamworking., • Good organisational skills, ability to prioritise and deliver to tight deadlines. Desirable • Chartered status (CEng) or working towards it., • Active membership of relevant professional bodies (e.g., IFE, SFPE)., • Experience of site inspections, stakeholder liaison and business development., • Sector experience in residential, healthcare, stadia or timber structures (if relevant). How to apply To apply simply complete a CV profile and submit your application, or for further information please contact . If shortlisted, one of our recruitment team will be in touch to arrange a introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

🔹 Mechanical Engineer Contract | Defence Project | Military Vehicles 🔹 Are you an experienced Mechanical Engineer seeking your next challenge? Join our innovative team working on digital integration for military vehicles, where your expertise will directly support frontline capability. Role Details: 🕒 6-month contract (potential for extension) 🗺️ Remote first — with just 1–2 days/month in Bristol 💼 Outside IR35 🚦 Start date: Next 4–8 weeks Project Highlights: • Digital ammunition rack with commander console interface, • Integrated rear-view camera system for GVA screens, • High-integrity, safety-critical ballistic software, • Compliance with DEF STAN 00-35, military EMC, platform-specific enclosures Who Should Apply: • Experienced Mechanical Engineers (defence or complex vehicle background preferred), • Eligible for UK Security Clearance, • Proactive, solution-driven, and ready to make a real impact

Key Responsibilities • Perform routine inspections and basic maintenance tasks across the converter station, • Carry out general “odd jobs” including minor repairs, housekeeping, and equipment checks, • Assist with planned and reactive maintenance activities as directed by the offshore team, • Monitor equipment and systems, reporting abnormalities or faults promptly, • Support logistics operations, including handling deliveries, tools, and materials, • Maintain cleanliness and organisation of work areas, workshops, and accommodation spaces, • Assist other departments (electrical, mechanical, HSE) as required during night operations, • Ensure compliance with all health, safety, and environmental procedures, • Participate in emergency response duties as part of the offshore team Skills & Experience • Previous offshore experience (wind, oil & gas, or marine) preferred, • Practical, hands-on approach with basic mechanical or electrical awareness, • Ability to work independently with minimal supervision during night shifts, • Strong problem-solving skills and willingness to take on varied tasks, • Good communication and teamwork skills, • Comfortable working in a remote offshore environment Qualifications • Offshore certifications – GWOs with Enhanced first aid, medical, chester step, HUET + CA EBS, Slinger, and signals, • Relevant technical or trade background (desirable but not essential), • Crane operator (desirable but not essential), • Personal Attributes, • Flexible and proactive attitude, • High level of reliability and self-discipline, • Safety-conscious mindset, • Able to adapt to changing priorities and unexpected tasks

A leading Tier 1 building services contractor is seeking an experienced Senior MEP Planner to join the delivery team on a major hyperscale data centre project located in East London. The successful candidate will take full ownership of MEP planning activities across pre-construction, construction and commissioning, providing programme leadership and strategic planning support to ensure all mechanical, electrical and public health (MEP) works are delivered safely, efficiently and in line with project milestones. This role requires strong experience in mission-critical environments, deep understanding of MEP installation sequencing, and the ability to work collaboratively with multidisciplinary teams on a fast-paced, technically demanding project. Requirements : · Extensive experience as an MEP Planner, ideally at Senior level, within data centres, mission-critical or high-technology projects. · Strong understanding of large-scale mechanical and electrical installation processes. · Proficiency in Asta Powerproject and/or Primavera P6. · Experience planning commissioning activities and coordinating multiple specialist vendors. · Strong communication, analytical and stakeholder engagement skills. · Ability to work in a fast-paced, high-pressure environment with strict deadlines. · Prior experience on hyperscale or multi-MW data centre projects highly advantageous.

Technical Services Manager / MEP Manager – Super Prime Residential 📍 London 💰 Salary £85,000-£95,000 🏗️ Super Prime Residential | High-Spec MEP | Multi-Project Oversight Not every contractor has a TSM… But the ones that do? Couldn’t live without them. A growing Super Prime Residential contractor in London are looking to bring in a Technical Services Manager / MEP Manager. This is a brand new role for the business - and that’s exactly why it’s interesting. They’re not just growing… They’re building the right structure around it. 🔨 The Role • Overseeing MEP packages across multiple live projects, • Package values typically £1-3m+, • Working on seriously high-end luxury residential schemes, • Getting into the detail where it actually matters, • Ensuring everything works seamlessly, not just on paper 🧱 What Makes This Different? • You’ll be the first TSM in the business, • Real opportunity to shape the role and how it evolves, • Influence how projects are delivered from a technical standpoint, • Grow alongside a contractor with a strong pipeline 💼 What You’ll Need • Strong understanding of both mechanical & electrical packages, • Experience within Prime / Super Prime residential projects, • Ability to manage complexity and coordinate high-spec systems, • A detail-driven mindset - this isn’t just box-ticking 🚀 Why Join? • Salary up to £95,000 + Package, • Genuine opportunity to put your stamp on a growing business, • Work on some of London’s most technically demanding residential schemes If you understand how complex the tech side of Prime Resi can get - and want a role where you can actually influence it - this is a very good opportunity.

MEP Project Engineer - UAE Are you a hands-on professional with a passion for precision and performance? Join us in delivering high-quality MEP systems for landmark projects in the UAE. We are building a talent pipeline and are interested in connecting with potential candidates for future opportunities. This posting is to gather expressions of interest for upcoming roles. Who We Are ALEMCO, a trusted leader in integrated MEP and facilities services, is part of the ALEC Group. We are known for our innovative solutions, commitment to excellence, and ability to deliver complex projects on time and within budget. With expertise spanning design, procurement, and execution, we are building a legacy of iconic projects that define the region. Discover how your skills can make an impact. Why Join Us? As a Project Engineer at ALEMCO, you’ll take ownership of engineering deliverables, ensuring that every aspect of your scope is compliant, cost-effective, and aligned with project timelines. This role offers a unique opportunity to work on groundbreaking projects while advancing your technical expertise. About Your Team You’ll report to the Technical Manager and oversee Technical Engineers in delivering high-quality MEP solutions. Your team operates in a collaborative environment, integrating design, procurement, and site operations for seamless project execution. Your Role • Ensure compliance with project specs, codes, and regulations., • Oversee material submittals, procurement, and long-lead item management., • Coordinate designs with drafting teams and offshore resources., • Lead on-site supervision, ensuring quality, safety, and progress., • Collaborate with subcontractors and support testing/commissioning phases. What We’re Looking For • Experience: 10+ years in MEP engineering/project execution, • Knowledge: Local & international codes, BIM 360, Revit, • Skills: QA/QC, design validation, procurement, MS Office, • Qualifications: BSc in Mechanical, Electrical, or Electronic Engineering What We Offer • The opportunity to contribute to iconic infrastructure projects in the UAE., • A supportive environment that values innovation, teamwork, and technical excellence., • Opportunities for professional development and career progression., • Tax-free earnings & relocation package Ready to Engineer the Future? If you’re inspired by what you’ve read and believe you’re the right fit, we’d love to hear from you. Join ALEMCO and play a key role in delivering high-performance MEP solutions for transformative projects. Apply today and be part of something extraordinary.

About the Company Since 2009, Yibi Precision has been a leading OEM specialist in Metal Injection Molding (MIM), integrating innovation, precision, and reliability into every solution we deliver. With over 1000 employees and a 50,000 sqm facility, we are proud to serve global clients across industries such as medical, automotive, aerospace, and high-end consumer electronics. • Expertise in MIM: High-performance parts (0.1g to 800g) with tolerances as tight as ±0.05mm., • Full In-house Control: A 30-person mold workshop and end-to-end capabilities including CNC, stamping, laser engraving, and PVD plating., • Global Standards: Certified with ISO 9001, IATF 16949, and Sedex 4P. About the Role We are seeking an entrepreneurial technical professional to pioneer MIM technology adoption and drive new business development across European industrial markets. This is not a traditional sales role; you are a Technology Evangelist. You will bridge the gap between Yibi’s world-class engineering in China and the sophisticated manufacturing needs of European clients, positioning Yibi as the preferred strategic partner for complex metal components. Responsibilities • Market Pioneering & Strategy: Develop and execute a comprehensive "Go-to-Market" strategy to establish Yibi as the MIM technology leader in Europe. Identify "blue ocean" opportunities in sectors where traditional manufacturing (CNC/Casting) can be replaced by MIM for better ROI., • Technical Consulting & Design Optimization: Lead collaborative "Design for Manufacturability" (DfM) sessions with client engineering teams. Conduct in-depth technical consultations to solve complex design challenges using Yibi’s material science and MIM capabilities., • Strategic Client Acquisition: Lead the entire acquisition process from initial technical pitch to project implementation. Build a robust pipeline of high-value opportunities through systematic market mapping and targeted outreach., • Thought Leadership: Establish Yibi’s authority in the European market by representing the company at industry conferences, delivering technical workshops, and developing case studies that demonstrate our innovative edge. Qualifications • Education: Bachelor’s degree or higher in Mechanical Engineering, Materials Science, or a related technical field is mandatory., • Experience: 5+ years of success in technical business development or application engineering within precision manufacturing (MIM, Die Casting, or CNC experience preferred)., • Market Knowledge: Proven track record of introducing new manufacturing technologies to skeptical markets and converting them into long-term partnerships., • Language: Native or Full Professional Proficiency in BOTH German and English is mandatory., • Mindset: An entrepreneurial "Hunter" spirit with the ability to work independently and manage complex, long-cycle technical sales. Required Skills • Technical business development, • Application engineering, • Precision manufacturing, • MIM, • Die Casting, • CNC experience, • Market mapping, • Strategic outreach, • Design for manufacturability, • Technical consulting Preferred Skills • Experience in leading workshops, • Developing case studies, • Representing companies at industry conferences Equal Opportunity Statement Yibi Precision is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. How to Apply If you are passionate about advancing manufacturing technology and driving growth through innovation, we encourage you to apply. Please submit your CV and a cover letter detailing your experience with MIM technology and new business development via LinkedIn or our career portal.

Senior Mechanical Engineer – Building Services Location: London Salary: Up to £65,000 The role: Senior Mechanical Engineer required in London for a leading Building Services consultancy delivering high-profile projects across commercial, residential and education sectors. Immediate start available with clear progression, strong package and hybrid working on offer. Job Description: • Leading Mechanical Design Engineer responsibilities across London projects, delivering coordinated Building Services designs from concept to completion, • Managing Senior Mechanical Engineer project delivery in London, including specifications, reports, drawings and budget control, • Coordinating multidisciplinary design teams across London schemes to ensure technical compliance and quality standards, • Overseeing site inspections, commissioning and project delivery as a Mechanical Engineer within the London market, • Supporting technical surveys including due diligence, PPM and condition reports across London-based assets Skills / Qualifications: • Degree Qualified Mechanical Engineer or Building Services Engineer with experience delivering projects in London, • Proven Senior Mechanical Engineer experience across Building Services design within the London market, • Strong knowledge of Mechanical Design, compliance standards and project delivery in London, • Proficient with design software including IES, Cymap or similar within a Mechanical Engineer role, • Chartered or working towards (CIBSE/IET) as a Mechanical Engineer operating in London What's on offer: This Senior Mechanical Engineer role in London offers up to £65,000 + package, hybrid working and clear progression within a growing consultancy delivering varied, high-quality projects. Apply now or contact me directly for a confidential discussion about this Mechanical Engineer opportunity in London.

M&E Site Manager → Building Services Manager | City of London | £80k + Travel + Package I’m working with a leading main contractor who has just secured a major cut & carve commercial redevelopment in the City, with works starting now and completion targeted for August 2027. This is a standout opportunity for an M&E Site Manager who wants to step up into a Building Services Manager role. The project will transform an existing 1990s building into 120,000 sq ft of high-spec, all-electric workspace, including: • Structural extensions (6th & 7th floors) with a new rooftop pavilion, • Multiple landscaped terraces, • New ground floor café & enhanced reception The Role: • Manage and drive all M&E packages on site, • Coordinate subcontractors across mechanical & electrical trades, • Work closely with the Project Manager and technical teams, • Lead commissioning and handover, • Experience as an M&E Site Manager on commercial projects, • Exposure to cut & carve / refurbishment schemes, • Strong technical understanding across M&E services, • Ambition to progress into a BSM role, • Up to £80k salary, • Travel covered + package, • Long-term project through to 2027, • Clear progression into Building Services Manager Drop me a message or apply directly.

Global Head of Manufacturing Humanoid is the first AI and robotics company in the UK, creating the world’s most advanced, reliable, commercially scalable, and safe humanoid robots. Our first humanoid robot, HMND 01, is a next-gen labour automation unit, providing highly efficient services across various use cases, starting with industrial applications. As we scale our product from prototype to production, we are looking for a Gloabl Head of Manufacturing to join our team based in London, UK. Our Mission At Humanoid we strive to create the world’s leading, commercially scalable, safe, and advanced humanoid robots that seamlessly integrate into daily life and amplify human capacity. Vision In a world where artificial intelligence opens up new horizons, our faith in its potential unveils a new outlook where, together, humans and machines build a new future filled with knowledge, inspiration, and incredible discoveries. The development of a functional humanoid robot underpins an era of abundance and well-being where poverty will disappear, and people will be able to choose what they want to do. We believe that providing a universal basic income will eventually be a true evolution of our civilization. Solution As the demands on our built environment rise, labour shortages loom. With the world’s workforce increasingly moving away from undesirable tasks, the manufacturing, construction, and logistics industries critical to our daily lives are left exposed. By deploying our general-purpose humanoid robots in environments deemed hazardous or monotonous, we envision a future where human well-being is safeguarded while closing the gaps in critical global labour needs. What You’ll Do • Define and lead Humanoid’s end-to-end manufacturing strategy from low-volume prototyping to scalable global production., • Build and manage a high-performance manufacturing team, including production, quality, and operations personnel., • Lead the planning and execution of our first manufacturing facility, including site selection, layout design, and equipment procurement., • Develop capacity plans aligned with business objectives, NPI timelines, and long-term demand forecasts., • Establish world-class manufacturing processes and systems focused on automation, lean production, and precision assembly., • Drive continuous improvement initiatives targeting efficiency, quality, cost, and throughput., • Implement manufacturing KPIs and process control systems to track performance and maintain operational excellence., • Collaborate closely with R&D, hardware engineering, and product design teams to ensure manufacturability (DFM) and smooth NPI transitions., • Work with supply chain, procurement, and finance to ensure alignment across sourcing, cost control, and production readiness., • Act as a strategic voice in product development, providing input on design tradeoffs and factory feasibility., • Establish and oversee rigorous quality systems and regulatory compliance protocols across all manufacturing activities., • Lead root cause analysis and corrective action processes to resolve production issues swiftly and sustainably., • 10+ years of experience in manufacturing leadership roles within hardware-intensive industries such as robotics, automotive, aerospace, or advanced machinery., • Proven success in scaling production from prototype to high-volume manufacturing., • Deep knowledge of modern manufacturing methodologies, including lean, Six Sigma, and Industry 4.0 technologies., • Technical fluency across mechanical, electrical, and software-integrated systems., • Demonstrated ability to lead multidisciplinary teams and collaborate across product, engineering, and operations., • Experience setting up greenfield manufacturing facilities or scaling startup operations., • Familiarity with ERP/MES systems and digital manufacturing platforms., • Background in DFM, DFA, and automation of complex electro-mechanical assemblies., • Competitive salary plus participation in our Stock Option Plan, • Paid vacation with adjustments based on your location to comply with local labor laws, • Travel opportunities to our London, Vancouver, and Boston offices, • Office perks: free breakfasts, lunches, snacks, and regular team events, • Freedom to influence the product and own key initiatives, • Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics

Within the International Operating Model, the Atlanta-based restaurant design “Hub” defines Chick-fil-A's global design standards, guidelines and operational principles, then partners with each in-country “Division” on local application and execution. In partnership with the Design Hub, this role will lead in-country division design partners and vendors in support of the development pipeline. Job Responsibilities & Activities in support of the Restaurant Development pipeline: • Provide design expertise for all Chick-fil-A location types including standalone drive-thru, high street and mall locations, • Ensure production of design deliverables produced by design partners including regional specifications adapted from the domestic performance standards, • Partner with Hub Design Leads and kitchen design team on back of house operational layouts, seating & décor plans, overall brand standards and design principles, • Clarify expectations for local Principal Designer and Design partners for restaurant design deliverable workflows and design guidelines, • Participate in evaluation of regional design partners’ capabilities, • Develop QA/QC process to drive accuracy of design deliverables and data points provided by design partners, • Provide feedback loops back to Hub for key restaurant design metrics, • Stay up to date with domestic US details, operational standards and design principles, • Assist in development of new design adaptations as applicable, • Provide regular updates, training, and evaluation of consultant design partners, • Effective coordination with domestic US stakeholders and key operational requirements, • Direct and train design partners on Chick-fil-A design requirements, • Stay up to date on industry standards as well as advanced workflows and technologies that will provide Chick-fil-A with a competitive advantage, • Partner with the Hub Program Lead to manage the relationship & performance reviews of regional design partners, • Partner with programme lead on procurement of materials and suppliers Preferred knowledge, capabilities and mindset: • Brand and restaurant design excellence with a preference for retail rollout, • Effective interpersonal skills. Cultural and emotional intelligence to engage with various personalities, • A hands on leader comfortable with personal accountability to become a reliable, trusted partner, • Embrace change, while identifying opportunities to provide clear, informed direction, • Curious and able to thrive in a collaborative, continuous-improvement environment where the focus is on what is right for the business, not who is right, • Process oriented with the ability (and patience) to effectively train teams of various skill levels and understanding, • Strong ability to work independently with wide latitude for unreviewed action & autonomous decision making, • Champion the Chick-fil-A brand standards, principles and processes, • Strong communication skills for distilling and sharing information (written and verbal), • A working understanding of Virtual Design and Construction (VDC) principles is preferred, • Experience in leading architectural design processes, • Proven ability for coordination with multiple disciplines (Mechanical, Plumbing, Electrical, Structural, Kitchen, Fire) with an understanding of constructability, • Functional familiarity with key Autodesk design delivery products: Revit, BIM360, AutoDesk Construction Cloud, as well as complimentary products such as Bluebeam, PowerPoint and Smartsheet Minimum Years of Experience 8 Travel Requirements Quarterly Required Level Of Education Bachelor's Degree