Mechanical jobs in LondonderryCreate job alerts

The rewards at Healogics are immense, starting with the important work we do to change patients’ lives. We also understand that meaningful work is hard work, and we are committed to supporting and compensating our employees for the tremendous service they provide. Healogics is the largest provider of advanced wound care services in the United States, treating more than 300,000 chronic wound patients annually across over 600 sites. With an aging society, obesity and diabetes on the rise, and an uptick in surgical procedures, the number of patients with non-healing wounds that would benefit from expert care is dramatically increasing. As a result, the company is working to provide our differentiated, quality outcomes to as many patients that would benefit through our out-patient clinic partnerships The Clinical Coordinator (CC)/Clinical Nurse Manager (CNM) is responsible for the coordination of clinical activities of the Wound Care Center. This may include patient care assessment, patient care planning and implementation, and working on patient care quality improvement. This position works in collaboration with the Program Director and the Medical Director to meet the Center’s program objectives and help ensure optimal healing outcomes and patient satisfaction. All clinicians working in a Healogics Center must perform their job responsibilities according to all Healogics policies, Hospital policies, as well as to accrediting organizations, federal and state regulation, and to the Centers for Medicare and Medicaid Services (CMS) guidelines, as applicable. • Proficient in all responsibilities related to Case Management. May be required to provide case management to a group of patients providing specific assessments according to protocols and procedures, clinical competence in procedural skills, treatments, and patient/caregiver education related to wound care management., • Organizes and prioritizes clinical responsibilities, provides clinical oversight to clinical staff, such as Registered Nurses (RNs); Licensed Practical Nurses (LPNs) or Licensed Vocational Nurses (LVNs); Certified Medical Assistants (CMAs); Hyperbaric Oxygen Technicians, etc., • Collaborates with other health care providers, key hospital personnel, Wound Care Center Providers, Program Director, and Medical Director regarding clinical and patient needs., • Consistently looks at current processes and procedures, and identifies and implements areas of improvement, while complying with Health Insurance Portability and Accountability Act (HPAA), the Department of Health (DOH), as well as hospital and Healogics requirements, • Engages in staff development, providing general in services as well as individual instruction and orientation., • Provides staff recognition through positive reinforcement and constructive feedback., • Collaborates with Program Director in coordination of program objectives, from a budgetary and financial perspective, • If the program also provides Vein Care services, coordinates vein clinic and assists in providing care as needed after Healogics Vein Clinic training completed, • Collaborates with Program Director and Medical Director to achieve Wound Care Center quality indicators, • May function as a Documentation Assistant (scribe) in accordance with Healogics and hospital policies, • May perform hyperbaric safety director duties after completing the required Healogics hyperbaric safety director training., • Following required hyperbaric training, may act as a chamber operator or an emergency chamber operator., • Performs patient care based on Center staffing needs., • Performs other duties as required., • Current RN (Registered Nurse) license – to maintain throughout the duration of employment in the position, • Associate’s Degree in Nursing (ADN) minimum required. Bachelor of Science in Nursing (BSN) preferred., • One year experience as an RN required. Two (2) or more years’ experience preferred., • Prior supervisory experience preferred., • Wound care certification preferred., • Current BLS (Basic Life Support) required, • Planning, organization, prioritization and time-management skills, • Strong interpersonal, oral and written communication skills, to include presentation skills, • Ability to work with others in a team environment and to communicate in laymen’s terms at all levels of the organization, • Ability to work on multiple projects at the same time, • Strong customer service skills and follow-up skills, • Strong analytical and quantitative skills, • Leadership skills, • Team-building and motivational skills, • Research and teaching skills, • Change management and demonstrated problem-solving skills, • Proficiency in Microsoft Suite (Excel, Word, Outlook, Power Point) preferred, • Working knowledge of systems/applications in hospital databases and web-based databases, • Being in a stationary position for extended periods of time (4 hours or more), • Viewing computer screen for extended periods of time (4 hours or more), • Keying frequently on a computer for 4 hours or more, • Moving about, • Close, distance and peripheral vision, • Reading, • Communicating, • Writing, • Lifting/moving items up to 20 pounds, • Lifting/moving items up to 75 pounds with equipment assistance, • Pushing/pulling, • Bending/stooping, • Reaching/grasping/touching with hands, • Traveling distances (car, airplane, etc.), • Normal office environment, • Primarily indoors environment, • Patient care environment, • Exposure to Hazards (blood borne pathogens, toxic chemicals, flammable explosive gases, etc), • Exposure to mechanical equipment, • Proximity to moving objects The salary for this position generally ranges between $83,000.00-$111,900.00 Annually This range is an estimate, based on potential employee qualifications: education, experience, geography as well as operational needs and other considerations permitted by law. #J-18808-Ljbffr

American Traveler is looking for a Registered Respiratory Therapist to fill a local contract position in Craig, Northern Ireland. This day-shift assignment involves managing mechanical ventilation and administering medication across diverse patient populations, including adults and pediatrics. The ideal candidate will have a graduate degree from a CoARC-approved program and must possess a current RRT license and BLS certification. Competitive benefits are provided from day one of assignment. #J-18808-Ljbffr

Our client is expanding its engineering teams in response to continued growth, new product development and increased production capacity. The successful Senior Design Engineer will develop new and existing mobile recycling machinery, contributing innovative solutions across design, manufacturing, testing and product improvement. This is a strong opportunity for a Design Engineer who is ready to take the next step up into a senior role. Based in the Derry/Londonderry area, the role is primarily site based, with the opportunity to work from either of two local facilities. This provides close collaboration with engineering, production, purchasing and supplier teams, alongside practical exposure to the machinery and its applications. Senior Design Engineer • Permanent role with a salary of £40,000+ DOE, • Engineering opportunity based in the Derry area., • Shape innovative mobile recycling machinery within a growing business., • Develop new products and modifications to existing mobile recycling machinery., • Apply QFD, FMEA, design for manufacture, prototype development and field testing standards., • Ensure products meet required standards for safety, function and reliability., • Improve designs to reduce manufacturing costs, working with production, purchasing and suppliers., • Investigate and resolve customer complaints promptly., • Apply current component technology and competitor insights to product development., • Degree educated or equivalent in Engineering., • Experience using 3D solid modelling CAD, ideally CREO, and familiarity with PDM systems., • Strong knowledge of mechanical and hydraulic systems., • Experience in mobile tracked equipment or recycling machinery is advantageous., • Creative, innovative and able to identify technical and commercial risks., • Effective communicator who can collaborate across multifunctional teams and meet deadlines., • A Design Engineer looking to step up into a senior role would be well suited to this opportunity., • Experience with Oracle TMS is advantageous., • Permanent role with a salary of £40,000+ DOE, • Healthcare for you and your dependants., • Contributory pension and life assurance., • Flexi-time., • Employee Stock Purchase Plan., • Accredited and specialist training opportunities., • Employee discounts through Perks @ Work., • A clear opportunity to take the next step in your design engineering career. Salary is usually negotiable, salary details listed are to be used as a guide and are based on factors such as your experience and expertise. #J-18808-Ljbffr

ACS Performance Ltd is seeking a Quality Systems Engineer to lead digital QMS and quality assurance across water, wastewater and energy projects. You will own the digital QMS, develop inspection processes and drive continuous improvement with hands-on QA in a multi-project environment. Applicants should hold a degree in Mechanical/Manufacturing/Quality Engineering and have proven QA/engineering experience, with the ability to read drawings and work within ISO 9001 frameworks to implement robust #J-18808-Ljbffr

Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. Why join - For our team, modular construction means greater speed, consistency and predictability. Factory-based integration allows us to identify and manage risks earlier, improve quality control, and provide greater certainty around cost and delivery. It also reduces the complexity and labor required on site, making installation and commissioning much more efficient. Vertiv's Infrastructure Solutions provide the flexibility, scalability, and efficiency that traditional infrastructures can't offer. Another major advantage is scalability. Our modular solutions use repeatable designs that can be deployed quickly and expanded as customer requirements grow. For a candidate joining the department, this means working in a fast-moving environment that combines engineering, manufacturing, technology, project delivery and innovation. You’ll be part of a team helping to transform how critical digital infrastructure is designed and delivered making data center construction faster, more reliable, and more scalable for the future. Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. With over 30 years of experience in delivering high-quality integrated power solutions, we are experts in providing technical services, project management services, and unrivalled customer support for every client project. Our LV & MV Switchgear divisions design and manufacture electrical distribution equipment for business-critical applications throughout Europe. Due to continued growth, Vertiv is seeking to recruit ambitious and motivated Electrical Engineering Lead to join the Presales team in Londonderry, Derry. The Lead Presales Electrical Engineer is an important part of an interdisciplinary team of technical experts (mechanical, structural, architectural) to bring together schematic design for Data center (Hyperscale, Enterprise, Colocation, Edge, CLS) and Critical Infrastructure facilities. Position includes applying theoretical knowledge, practical engineering skills, as well as communicational skills in the fields of Clean Energy, AI and Data center design. • Concept design of Data center electrical power systems and architecture, with traditional and AI design requirements, which includes:, • LV power distribution (low voltage switchgear, uninterruptible power supply systems, busbar systems), • MV power distribution systems (medium voltage switchgear and transformers), • Auxiliary systems (AC, DC), lightning protection systems, diesel gensets…., • Electrical load calculations, arc flash, short circuit and protection coordination study calculations and modeling tools, • Electrical single-line diagrams, • Understanding of relevant codes and standards for electrical power equipment and installations, • Coordination with other technical disciplines (architectural, structural, HVAC, controls, fire protection), • Reading and understanding RFP and tender documents, • Problem solving and interpretation of customer requirements in proposed solutions, • Modular Data center technical solutions and quotations, • Bachelor’s degree or equivalent in Electrical Engineering, • 5+ years experience, • Proficient in Electrical power system design, • Sizing and specification of electrical equipment and installations, • Knowledge of electrical load calculations, short circuit and protection coordination study calculations and modeling tools, • Solid communication skills, both written and oral, to work across multiple Engineering and Manufacturing teams to bring architectures and concepts to deployment, • PC skills: active user of Windows, MS Office incl. Excel (A), Word (A), AutoCAD, • Active English, • No special physical requirements, • None #J-18808-Ljbffr

Industry: Engineering / Manufacturing – Metal fabrication and assembly HN12903 What's in it for you? • £65,000 - £75,000 basic salary depending on experience, • Excellent pension and wider benefits package, • Senior management position with significant autonomy, • Lead and develop an established Quality team, • Opportunity to influence Quality strategy and operational performance, • Excellent long-term career opportunity within a growing engineering business Company and Role of Quality Manager Vickerstock are working exclusively with an established and growing engineering and manufacturing business in the recruitment of a Quality Manager for their local Northern Ireland operations. This is a significant senior Quality appointment with responsibility for leading an established team of six Quality personnel and taking ownership of the continued development of Quality across the business. The position will be predominantly based at one of the company's Northern Ireland operations, with occasional travel to other very local sites. You will have responsibility for the Quality function, combining people leadership with Quality Systems, manufacturing quality, customer requirements and Continuous Improvement. This is very much a manufacturing-focused Quality position, working closely with Engineering and Production to improve product and process quality. The opportunity would particularly suit an experienced Quality Manager who enjoys being close to manufacturing and wants the autonomy to develop people, improve systems and make a genuine impact on operational performance. Key Responsibilities for this Quality Manager position • Lead and develop a team of six Quality personnel, • Take ownership of the Quality Management System and its continued improvement, • Drive improvements in product and manufacturing quality, • Lead quality audits and ensure appropriate standards are maintained, • Oversee root cause investigations and corrective actions, • Manage customer and supplier quality issues, • Develop quality procedures and processes, • Monitor quality performance and identify areas for improvement, • Work closely with Engineering, Manufacturing and senior management, • Drive Continuous Improvement and develop a strong quality culture across the business Essential Criteria for this Quality Manager position • Strong Quality Management experience (Minimum 3 years in Quality Management) within an engineering or manufacturing environment - Ideally Metal fabrication and assembly, • Experience managing and improving a Quality Management System (QMS), • A formal Engineering, Manufacturing or Quality qualification would be advantageous, although strong relevant industry experience will also be considered. We are particularly interested in speaking with Quality Managers and Senior Quality Managers. Strong Quality Systems Managers, Quality Engineering Managers or Lead Quality Engineers with significant team leadership and QMS responsibility who are ready for greater responsibility will also be considered. Quality Manager | Senior Quality Manager | Head of Quality | Quality Engineering Manager | Quality Systems Manager | Lead Quality Engineer | Quality Assurance Manager | QA Manager | Quality Management | QMS | ISO 9001 | Manufacturing Quality | Supplier Quality | Customer Quality | Root Cause Analysis | CAPA | Auditing | Continuous Improvement | Metal Manufacturing | Metal Fabrication | Fabricated Products | Engineering Assembly | Mechanical Assembly | Heavy Engineering | Machinery Manufacturing | Welding | Production Quality | Coleraine | Limavady | Ballymoney | Maghera | Magherafelt | Kilrea | Dungiven | Ballymena | County Derry | Derry / Londonderry | Mid Ulster | Cookstown | Dungannon | Omagh| Northern Ireland FOR A FULL LIST OF YOUR SECTOR RELATED VACANCIES PLEASE PERUSE OUR WEBSITE #J-18808-Ljbffr

Terex GB Ltd has been ranked number 18 in the Ulster Business Top 100 NI companies. Terex is a fast-moving engineering company continually developing in N. Ireland. Here at Terex, we are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. While our operations are global, each office or factory is a close-knit community. It's an exciting time to be part of the expanding manufacturing sector - come join us! Design Engineer (Green-tec) Green-tec manufacture and engineer vegetation and tree care solutions. With a robust range of chippers, trommels, shredders, dedicated tree care handlers, tracker mulchers and mulching heads. We have an exciting roadmap ahead for new products, services, production capacity and business expansion, and as a result we are expanding our team. We currently have an opportunity for a Design Engineer who will report to the Green-tec Product Manager and will be based at Campsie manufacturing sites. • Excellent total compensation package to include competitive salary, • free health care for you and your dependents, • contributory pension scheme, • life assurance cover, • Employee Stock Purchase Plan, • Earn extra cash via our 'Refer a Friend' scheme, • Perks @ work - offering you a wide range of discounts and offers on restaurants, cafes, hotels, gyms, retailers, day excursions, supporting our local businesses and communities, • Provide engineered solutions for the development of new products and modifications to existing products, • Follow Group standards of in the areas of QFD, FMEA, design-for-manufacture, prototype development and field testing, • Follow Group engineering standards and associated IT systems, to ensure effective global management of released engineering data, • Ensure current and new products meet standards and performance levels specified for safety, function and reliability, • Reduce manufacturing cost through improved design and consultation with the production department, purchasing and suppliers, • To investigate and address Customer Complaints in a timely manner, • Stay knowledgeable of machine component advancements and competitor design trends; apply latest technology to new and existing designs where appropriate to stay current and innovative, • Support aftersales and helpdesk team with answering technical queries from dealers, • Degree educated or equivalent in Engineering, ideally with design experience in this or a similar industry, • Competent user of 3D Solid Modeling CAD, ideally CREO, and familiarity with Product Data Management (PDM) systems, • Good technical expertise in mechanical and hydraulic systems, • A good understanding of the various applications that the equipment can operate in along with an appreciation for the expected performance of the machines, • Creativity and innovative thinking, • Good English communication skill, both written and spoken, • A 'Can do' attitude and ability to interact with a multi-functional team, • Ability to work with others to meet deadlines, • Able to assess workload and commit to realistic timelines, • Able to select from multiple design alternatives when a clear best choice is not evident, • Can identify risks both technical and commercial with proposed product change or new product TEREX is an equal opportunity employer and appointments are based on merit. We value diversity and welcome applications from all sections of the community. Terex Corporation is a global leader in specialized equipment solutions, serving essential sectors such as emergency services, waste and recycling, utilities, and construction. Our diversified portfolio positions us in resilient, high-demand markets with strong long-term growth potential. We design and manufacture advanced specialty vehicles- including fire, ambulance, and recreational vehicles- alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Through our global dealer, parts and service network and true value-creating digital solutions, we deliver best-in-class lifecycle support, helping customers maximize return on investment. With a strong manufacturing footprint in the United States and operations across Europe, India, and Asia Pacific, Terex combines global reach with local expertise to capture opportunities worldwide. Our strategy is clear: exceed customer expectations, invest in innovation, leverage our diversified portfolio, and deliver consistent, profitable growth for our shareholders. For more information, please visit www.terex.com. We see inclusion as a key to our success and are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions, ensuring equity within our workplace. As an Equal Opportunity Employer, employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability or other characteristics protected by law. Terex Careers Video Terex Early Talent Video Terex Corporation is a global leader in specialized equipment solutions, serving essential sectors such as emergency services, waste and recycling, utilities, and construction. Our diversified portfolio positions us in resilient, high-demand markets with strong long-term growth potential. We design and manufacture advanced specialty vehicles- including fire, ambulance, and recreational vehicles- alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Through our global dealer, parts and service network and true value-creating digital solutions, we deliver best-in-class lifecycle support, helping customers maximize return on investment. With a strong manufacturing footprint in the United States and operations across Europe, India, and Asia Pacific, Terex combines global reach with local expertise to capture opportunities worldwide. Our strategy is clear: exceed customer expectations, invest in innovation, leverage our diversified portfolio, and deliver consistent, profitable growth for our shareholders. For more information, please visit www.terex.com. #J-18808-Ljbffr

Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. Why join - For our team, modular construction means greater speed, consistency and predictability. Factory-based integration allows us to identify and manage risks earlier, improve quality control, and provide greater certainty around cost and delivery. It also reduces the complexity and labor required on site, making installation and commissioning much more efficient. Vertiv's Infrastructure Solutions provide the flexibility, scalability, and efficiency that traditional infrastructures can't offer. Another major advantage is scalability. Our modular solutions use repeatable designs that can be deployed quickly and expanded as customer requirements grow. For a candidate joining the department, this means working in a fast-moving environment that combines engineering, manufacturing, technology, project delivery and innovation. You’ll be part of a team helping to transform how critical digital infrastructure is designed and delivered making data center construction faster, more reliable, and more scalable for the future. Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. With over 30 years of experience in delivering high-quality integrated power solutions, we are experts in providing technical services, project management services, and unrivalled customer support for every client project. Our LV & MV Switchgear divisions design and manufacture electrical distribution equipment for business-critical applications throughout Europe. Due to continued growth, Vertiv is seeking to recruit ambitious and motivated Electrical Engineering Lead to join the Presales team in Londonderry, Derry. The Lead Presales Electrical Engineer is an important part of an interdisciplinary team of technical experts (mechanical, structural, architectural) to bring together schematic design for Data center (Hyperscale, Enterprise, Colocation, Edge, CLS) and Critical Infrastructure facilities. Position includes applying theoretical knowledge, practical engineering skills, as well as communicational skills in the fields of Clean Energy, AI and Data center design. • Concept design of Data center electrical power systems and architecture, with traditional and AI design requirements, which includes:, • LV power distribution (low voltage switchgear, uninterruptible power supply systems, busbar systems), • MV power distribution systems (medium voltage switchgear and transformers), • Auxiliary systems (AC, DC), lightning protection systems, diesel gensets…., • Electrical load calculations, arc flash, short circuit and protection coordination study calculations and modeling tools, • Electrical single-line diagrams, • Understanding of relevant codes and standards for electrical power equipment and installations, • Coordination with other technical disciplines (architectural, structural, HVAC, controls, fire protection), • Reading and understanding RFP and tender documents, • Problem solving and interpretation of customer requirements in proposed solutions, • Modular Data center technical solutions and quotations, • Bachelor’s degree or equivalent in Electrical Engineering, • 5+ years experience, • Proficient in Electrical power system design, • Sizing and specification of electrical equipment and installations, • Knowledge of electrical load calculations, short circuit and protection coordination study calculations and modeling tools, • Solid communication skills, both written and oral, to work across multiple Engineering and Manufacturing teams to bring architectures and concepts to deployment, • PC skills: active user of Windows, MS Office incl. Excel (A), Word (A), AutoCAD, • Active English, • No special physical requirements, • None #vertivireland • Safety., • Integrity., • Respect., • Teamwork., • Inclusion., • High-Performance Culture, • Customer Focus, • Operational Excellence, • Innovation, • Financial Strength, • Own it, • Act with urgency, • Foster a customer-first mindset, • Think big and execute, • Lead by example, • Drive continuous improvement, • Learn and seek out development, • Promote transparent & open communication Vertiv (NYSE: VRT) brings together hardware, software, analytics and ongoing services to enable its customers’ vital applications to run continuously, perform optimally and grow with their business needs. Vertiv solves the most important challenges facing today’s data centers, communication networks, and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network. Headquartered in Westerville, Ohio, USA, Vertiv employs around 34,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to #J-18808-Ljbffr

American Traveler is seeking a local contract Registered Respiratory Therapist for a day‑shift assignment in Craig, Colorado. • Specialty: Registered Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 07/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Local Contract, • Shift: Days, 3 x 12 hrs, • Hours: 36 hrs/wk, • Start Date: Jul 12, 2026, • Length: 13 weeks, • Openings: 1 Responsibilities include mechanical ventilation management, arterial blood gas draws, airway management, and medication administration across adult, pediatric, neonatal, and geriatric patient populations. • Day shift schedule, • 13‑week assignment, • Cardiopulmonary/Respiratory Therapy department, • Patient population: adult, geriatric, pediatric, neonatal, • Specialty areas: Emergency, Neonatal, Pediatric, Geriatric, Critical Care, • Mechanical ventilation management, arterial blood gas draws, airway management, medication administration, • Graduate of a CoARC‑approved Respiratory Care Program with RRT credential per NBRC guidelines, • Current, unencumbered RRT license (license required if applicable), • Current BLS certification, • NRP certification required (or obtainable within 6 months of hire), • 1 year of RRT experience with knowledge of General Respiratory Care and Mechanical Ventilation preferred, • Experience with pulmonary diagnostics preferred, • Experience with cardiac diagnostics (EKG, Holter monitor, Event Monitor, Cardiac Stress Testing) preferred, • DOB and SSN may be required for consideration, • Administer and monitor respiratory care procedures across specialty areas including Emergency, Neonatal, Pediatric, Geriatric, and Critical Care, • Perform airway management (bag/mask ventilation, suction, assist with intubation), • Initiate, maintain, and monitor ventilated patients; interpret flow‑volume and pressure‑volume curves to guide clinical changes, • Translate medication dosing for neonatal and pediatric patients using appropriate equipment and procedures, • Assist with orientation and training of new employees, respiratory students, and nursing students, • Maintain accurate documentation of all respiratory care procedures and patient charge reconciliation, • Adhere to facility dress code and infection control, safety, and risk management procedures American Traveler Job ID #P-721900L. Posted job title: Travel Respiratory Therapist • Premium medical, dental, vision, and life insurance beginning day one of your assignment, • Generous 401(k) match, • Substantial housing stipend, • 24/7 support and access to in‑house clinicians #J-18808-Ljbffr

Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. With over 30 years of experience in delivering high-quality integrated power solutions, we are experts in providing technical services, project management services, and unrivalled customer support for every client project. Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. With over 30 years of experience in delivering high-quality integrated power solutions, we are experts in providing technical services, project management services, and unrivalled customer support for every client project. Vertiv is seeking a highly motivated and experienced Manufacturing Engineers to join our dynamic team. The Manufacturing Engineer will play a crucial role in optimizing our manufacturing processes, improving efficiency, and ensuring product quality. This position requires a strong understanding of manufacturing principles, problem-solving skills, and a passion for continuous improvement. • Create and update detailed manufacturing routings, including process steps, equipment requirements, and time estimates., • Ensure that routings align with engineering drawings, specifications, and quality standards., • Collaborate with engineering and production teams to optimize routing efficiency and minimize costs., • Create and update detailed manufacturing routings, including process steps, equipment requirements, and time estimates., • Ensure that routings align with engineering drawings, specifications, and quality standards., • Collaborate with engineering and production teams to optimize routing efficiency and minimize costs., • Conduct time studies to accurately determine process times and labor requirements., • Use time study data to optimize routings and improve productivity., • Maintain comprehensive documentation of manufacturing processes, including routings, work instructions, and quality plans., • Ensure that documentation is up-to-date and accessible to relevant personnel., • Analyze and evaluate existing manufacturing processes to identify areas for improvement. Implement innovative solutions to enhance efficiency, reduce costs, and improve product quality., • Research and select appropriate manufacturing equipment, ensuring compatibility with production requirements and budgetary constraints. Oversee the installation and commissioning of new equipment., • Develop and implement production plans, schedules, and capacity planning to meet customer demand and optimize resource utilization., • Diagnose and troubleshoot manufacturing problems, implementing corrective actions to minimize downtime and maximize productivity., • Drive a culture of continuous improvement by identifying and implementing lean manufacturing principles and methodologies., • Work closely with cross-functional teams, including engineering, operations, and quality, to achieve project objectives and support overall business goals., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field., • Minimum 3 years of experience in a manufacturing environment., • Strong understanding of manufacturing principles, including lean manufacturing, process optimization, and quality control., • Proficiency in using CAD/CAM software and manufacturing simulation tools., • Excellent problem-solving and analytical skills., • Strong communication and interpersonal skills., • Ability to work independently and as part of a team., • Certification in Lean Manufacturing or Six Sigma., • Knowledge of automation and robotics. #vertivireland The successful candidate will embrace Vertiv's Core Principles & Behaviors to help execute our Strategic Priorities. Safety. Integrity. Respect. Teamwork. Inclusion. • High-Performance Culture, • Customer Focus, • Operational Excellence, • Innovation, • Financial Strength, • Own it, • Act with urgency, • Foster a customer-first mindset, • Think big and execute, • Lead by example, • Drive continuous improvement, • Learn and seek out development, • Promote transparent & open communication Vertiv (NYSE: VRT) brings together hardware, software, analytics and ongoing services to enable its customers' vital applications to run continuously, perform optimally and grow with their business needs. Vertiv solves the most important challenges facing today’s data centers, communication networks, and commercial and industrial facilities with a portfolio of power, cooling and IT infrastructure solutions and services that extend from the cloud to the edge of the network. Headquartered in Westerville, Ohio, USA, Vertiv employs around 34,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to #J-18808-Ljbffr

Vertiv Group Corporation is seeking a Lead Presales Electrical Engineer to join the Londonderry team. You will work in an interdisciplinary setting to design electrical power systems for data centers, coordinating with mechanical, architectural, and controls disciplines. The role requires strong knowledge of LV/MV distribution, load calculations, and protection coordination, with a focus on delivering modular, scalable solutions for critical infrastructure. #J-18808-Ljbffr

Vertiv is seeking a Lead Presales Electrical Engineer for Londonderry, Derry. You will join the Presales team to design data center electrical power architectures, balancing traditional power systems with AI-enabled design approaches. In this role you will work with mechanical, structural and architectural specialists to translate customer requirements into modular, repeatable solutions and compelling quotations for business-critical applications across Europe. #J-18808-Ljbffr

Quality Manager Exclusive to Vickerstock Location: Mid County Derry Job Type: Full-time, Permanent Industry: Engineering / Manufacturing - Metal fabrication and assembly HN12903 What's in it for you? • £65,000 - £75,000 basic salary depending on experience, • Excellent pension and wider benefits package, • Senior management position with significant autonomy, • Lead and develop an established Quality team, • Opportunity to influence Quality strategy and operational performance, • Excellent long-term career opportunity within a growing engineering business Company and Role of Quality Manager Vickerstock are working exclusively with an established and growing engineering and manufacturing business in the recruitment of a Quality Manager for their local Northern Ireland operations. This is a significant senior Quality appointment with responsibility for leading an established team of six Quality personnel and taking ownership of the continued development of Quality across the business. The position will be predominantly based at one of the company's Northern Ireland operations, with occasional travel to other very local sites. You will have responsibility for the Quality function, combining people leadership with Quality Systems, manufacturing quality, customer requirements and Continuous Improvement. This is very much a manufacturing-focused Quality position, working closely with Engineering and Production to improve product and process quality. The opportunity would particularly suit an experienced Quality Manager who enjoys being close to manufacturing and wants the autonomy to develop people, improve systems and make a genuine impact on operational performance. Key Responsibilities for this Quality Manager position • Lead and develop a team of six Quality personnel, • Take ownership of the Quality Management System and its continued improvement, • Drive improvements in product and manufacturing quality, • Lead quality audits and ensure appropriate standards are maintained, • Oversee root cause investigations and corrective actions, • Manage customer and supplier quality issues, • Develop quality procedures and processes, • Monitor quality performance and identify areas for improvement, • Work closely with Engineering, Manufacturing and senior management, • Drive Continuous Improvement and develop a strong quality culture across the business Essential Criteria for this Quality Manager position • Strong Quality Management experience (Minimum 3 years in Quality Management) within an engineering or manufacturing environment - Ideally Metal fabrication and assembly, • Experience managing and improving a Quality Management System (QMS), • A formal Engineering, Manufacturing or Quality qualification would be advantageous, although strong relevant industry experience will also be considered. We are particularly interested in speaking with Quality Managers and Senior Quality Managers. Strong Quality Systems Managers, Quality Engineering Managers or Lead Quality Engineers with significant team leadership and QMS responsibility who are ready for greater responsibility will also be considered. Quality Manager | Senior Quality Manager | Head of Quality | Quality Engineering Manager | Quality Systems Manager | Lead Quality Engineer | Quality Assurance Manager | QA Manager | Quality Management | QMS | ISO 9001 | Manufacturing Quality | Supplier Quality | Customer Quality | Root Cause Analysis | CAPA | Auditing | Continuous Improvement | Metal Manufacturing | Metal Fabrication | Fabricated Products | Engineering Assembly | Mechanical Assembly | Heavy Engineering | Machinery Manufacturing | Welding | Production Quality | Coleraine | Limavady | Ballymoney | Maghera | Magherafelt | Kilrea | Dungiven | Ballymena | County Derry | Derry / Londonderry | Mid Ulster | Cookstown | Dungannon | Omagh| Northern Ireland #J-18808-Ljbffr

Here at Terex, we are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. While our operations are global, each office or factory is a close-knit community. Its an exciting time to be part of the expanding manufacturing sector come join us! Green-tec is a leading brand in mechanised arboriculture and vegetation management, with an exciting product roadmap covering chippers, remote-control mulchers and self-propelled tool carriers. Following our continued success, we are expanding our team in Campsie and currently have an opportunity for a Test and Development Engineer. Whats in it for you Excellent total compensation package to include competitive salary, free health care for you and your dependents, contributory pension scheme, life assurance cover. Employee Stock Purchase Plan. Earn extra cash via our Refer a Friend scheme. Perks @ work offering you a wide range of discounts and offers on restaurants, cafes, hotels, gyms, retailers, day excursions, supporting our local businesses and communities. Access to global learning and development programs offering accredited and specialist training. About the Role Collaborate with The Green-Tec Engineering Manager and the New Product Development teams to ensure the Voice of the Customer is integral to the development of design specifications for new products and modifications to existing products Cooperate with Design Engineers to develop performance and test criteria for new products and product upgrades Provide an independent test and proving function able to provide full reporting of Product Performance, failure mode and conformance to legislation / product specification needs. Design appropriate testing regimes for New Product Development ensuring common standards across all product groups Ensure that all information is recorded, documented and stored centrally (i.e. Site Log, Engine Hours, Machine Performance, Site Reports, Test Data, Performance Data, Service History, Issues and Snags etc.) Identify and appraise possible test locations while ensuring that the prototype objectives / requirements are clearly defined to our dealers and customers Flexible in terms of hours worked and travel on short notice when and where is necessary About you Higher National Certificate or Diploma in Engineering or relevant discipline (Equivalent Experience may be substituted) Experience with the development, test and successful launch to market of mobile tracked and wheeled heavy equipment. A good understanding of the various applications that the equipment can operate in along with an appreciation for the expected performance of the machines. Good technical expertise in mechanical and hydraulic systems Hands-On and a practical person with an interest in the development of mechanical, hydraulic and electrical systems. Knowledge and familiarity with various test equipment and be capable of the instrumentation of a machine to record various machine performance outputs. Interpret the data acquired from instrumentation, and work with design team leaders to develop corrective action Creativity, innovative thinking and excellent problem solving skills. Good English communication skill, both written and spoken; Familiarity with Microsoft Office tools Excellent project management skills Good Presentation and interpersonal skills B+E category Driving license desirable Knowledge, Skills and Abilities: A Can do attitude and ability to interact with a multi-functional team. Ability to work with others to meet deadlines. Able to assess workload and commit to realistic timelines. Able to select from multiple design alternatives when a clear best choice is not evident. Can identify risks both technical and commercial with proposed product change or new product If you feel you have the enthusiasm to join a busy manufacturing environment, apply for this role and view all available positions within Terex, please visit our careers page. TEREX is an equal opportunity employer and appointments are based on merit. We value diversity and welcome applications from all sections of the community TPBN1_NI

Mechanical(Electro-mechanical) R&D Engineer up to £c50k + Bonus ABJ6733 Perm Hybrid 3:2 An exciting opportunityhas arisen for an experienced mechanical / electro mechanical Research & Development Technology Engineer to join an innovative engineering and R&D team focused on developing ne

Mitie Ireland is seeking an Electrical Maintenance Technician to perform planned preventive maintenance and reactive repairs across electrical systems and building services in Northern Ireland.The role includes fault-finding, diagnosis, and repair of distribution boards, motors, pumps, and BMS, with

Expleo in Belfast, UK is seeking Mechanical Design Engineers with checking experience to join our defence-focused team.

Haughey Recruitment is seeking a proactive Senior Mechanical Engineer in Magherafelt to join a growing manufacturing business. This hands-on role combines engineering design, development, and production support, requiring strong mechanical and hydraulic systems expertise.

Accountability and responsibility as technical checker of drawings and documentation generated in support of the mechanical engineer role. Mechanical engineering degree or equivalent industry experience.

AC Corporation is seeking a Mechanical Project Manager in Charleston to own client projects from estimate through closeout and to grow long-term relationships with owner-direct customers.

James Fisher and Sons plc is seeking a Mechanical Engineer for a Westhill-based role with hybrid working.

Mechanical Engineering degree or equivalent industry background. Strong understanding of mechanical systems design and service support requirements. Familiarity with key design standards relevant to mechanical engineering.

Mechanical fitting and assembly of trailer chassis. Installing mechanical components, brackets, axles and associated equipment. General mechanical assembly and fitting duties.

The ideal candidate will have a Mechanical Engineering degree, extensive design experience, and proficiency in PLM systems and CAD software. A leading global engineering services company is seeking a Senior Mechanical Engineer to provide engineering design solutions and support for their product ran

We are looking for Mechanical Design Engineers with checking experience to be based at our customers (Defence) Belfast UK office. Check mechanical engineering drawings to BS8888* including dimensions, tolerances, GD&T, surface texture, and welding symbols. Previous delegated checker with experienc

Ready to Level Up Your Career? Join The team with our client working at Govan.Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required.We're not just offering a job — we're offering a mission/Opportunity.If

Mechanical Design Engineer sought for a specialist engineering organization to develop cost-effective, regulation-compliant engineering solutions for smoke control, ventilation, and facade ventilation systems.

Mechanical Maintenance Technician needed for a leading global manufacturer in a fast-paced production environment.

Seeking an experienced Mechanical Maintenance Engineer for a permanent, days-based role in a heavy industry manufacturing supplier in Doncaster.

Mechanical Project Engineer needed to manage and deliver mechanical building services projects, focusing on heating and pipework for commercial and industrial sectors.

Knowlton and Newman, part of the Rubix Group, provide 24/7 engineering services.We repair, overhaul, install, and maintain pumps, motors, gearboxes, compressors, hydraulic equipment and cover a wide range of industrial equipment for customers across multiple sectors.The Technician role is a multi-sk

Working for a firm who design and manufacture electro-mechanical devices in the UK, you will possess a strong mechanical knowledge and e. Long established engineering firm seek a skilled Mechanical Designer to join the team.

Salary: £44,400(Mechanical) / £49,500 (Electrical) + overtime @ 1.

Mechanical Design Engineer needed for a 6-month contract in Plymouth, offering hybrid/remote work.

Seeking a Mechanical Maintenance Engineer for a leading manufacturer in Arnold, Nottingham, working full-time day shifts.

Mechanical Maintenance Engineer needed for a manufacturing company to perform planned and reactive maintenance on production machinery, including project work and fault finding.

Job title: Electro Mechanical Assembler. Role of Electro Mechanical Assembler:. Carrying out full electro mechanical assembly of products including PCB assembly, xxuwjjq building and installation of harnesses and Looms.

Experienced Mechanical Technician wanted for a leading energy and industrial operations organization to support mechanical reliability and maintenance excellence at its Rye House site.

Mechanical Engineers needed in Barrow in Furness to join our client, an established engineering consultancy working on cutting edge systems within the marine industry. You will support the development and delivery of mechanical platform systems, ensuring.

Engineer / Installer | Mechanical Installer | Installation Engineer | Site Installation Engineer.

Requires a Mechanical Engineer with leadership experience.

Mechanical Design Engineer needed for a permanent role in Derby, designing bespoke packaging solutions.

Responsible for maintaining and repairing mechanical equipment for water treatment, pumping stations, and reservoirs, ensuring reliable service and preventing environmental risks.

KPI Bonus+ Excellent Benefits).Accessible from Cheltenham, Tewkesbury, Gloucester, Worcester, Evesham.An exciting opportunity for an experienced.

Shift Mechanical Maintenance Technician.

Experienced Mechanical Project Manager sought for a well-known contractor in Ipswich to lead commercial and industrial projects, ensuring safe, timely, and budget-compliant delivery.

Seeking a commercial plumber for a full-time, permanent role in London and East Anglia, offering a salary of £40,000-£48,000 per annum with excellent benefits.

This position is mechanically biased, with a strong focus on maintaining, repairing, and optimising mechanical systems, particularly valves and associated equipment, while still supporting electrical fault-finding where required. Diagnose and repair faults with a mechanical bias, including valves, p