Offres mechanical à Maidenhead - Page 2Créer des alertes d'emploi

Are you an Electrical Installation Engineer or similar with a background in both Electrical and Mechanical Engineering, looking to join a well-established, highly respected company, offering impressive career progression opportunities as well as top-of-the-line technical development, quickly making

The ideal candidate will currently be a mechanical pump fitter service engineer with a proven track record, could also be a motor refurber or similar who is looking to step up their career into a more senior role.

Our Client provide remote diagnostic solutions and services to the automotive industry.Make sure to apply quickly in order to maximise your chances of being considered for an interview Read the complete job description below.They offer cutting-edge, expert diagnostics using both after-market and original equipment manufacturer tools to provide safe and accurate repairs.Benefits you can look forward to include: Excellent benefits package including Company Van, £37,000-£40,000 salary package and a generous bonus scheme.The Requirement The job role will involve: Carrying out Mobile ADAS system calibrations to manufacture standards Coding and programming new modules solve electrical problems Carrying out wiring repairs Some overnight stays may be needed Previous experience with the Automotive industry is essential.However, ADAS training will be provided in the first few weeks if needed for someone with a solid vehicle mechanical knowledge.Benefits: Company van Company pension Physical demands This job operates primarily in a professional office environment with frequent visits to various automotive repair shop environments that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance.This position is responsible for driving a company provided vehicle to various locations with their assigned geographic area.Physical requirements also include occasional lifting/carrying of 5 pounds Occasional travel may be required for this position.Equal Opportunities Statement: The Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetics, or any other status protected under applicable federal, state, or local laws. xjlbheb This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Since 1984, my client has provided solutions and expertise that have enabled manufacturers, 3rd party logistics providers, and retailers to rapidly adapt and be at the forefront of their ever-changing markets.Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV.As the Service and Repair Engineer, you will be responsible for providing end-to-end support for a diverse range of Auto-ID and industrial automation technologies.The role will require the engineer to divide their time between being office-based at the repair centre and performing configuration, testing, repair, and deployment of equipment and being field-based, which would require attending customer sites to conduct installations, commissioning, preventative maintenance, and on-site troubleshooting or repair of equipment, including complex automation systems.What we would like from the Service and Repair Engineer: Experience in a relevant technical role, such as field service or industrial automation Strong technical and IT skills, with a good background in electrical and mechanical systems Hands-on experience with any of the following: AMRs, print and apply systems, Machine Vision, or FIS scanners, and working knowledge of device configuration for brands like Zebra, Honeywell, or Datalogic Excellent troubleshooting, problem-solving, and diagnostic skills A team player with a helpful, positive, calm, and methodical approach Pro-active approach to resolving problems and able to organize work priorities Must have the flexibility and willingness to travel nationwide, including overnight stays, as required by customer site visits Full UK Driving Licence What we offer the Service xjlbheb and Repair Engineer: Salary between £30,000 to £40,000 doe 25 days annual leave Bank holidays Company pension (after completion of probation) Private Medical (after completion of probation) Private Insurance (after completion of probation) Life Insurance (after completion of probation) Cycle to Work Extensive Training provided If this opportunity as a Service and Repair Engineer is of interest to you, dont hesitate to get in touch asap! Click here to apply or contact Luke Tanner at Orion Recruitment

Mechanical Engineer – Gatwick.We are looking for a skilled Mechanical Engineer to join our team at Gatwick.The ideal candidate will be experienced in both repair and maintenance, working closely with colleagues to ensure all trailers meet our high-quality standards.You should be confident work

The successful Engineer will provide support to the Operations team providing guidance and support during breakdowns. Have proven experience of working with engines and a recognised Mechanical Engineering qualification to Level 3.

Quality Inspector Apprenticeship (Level 3 - Advanced). As a Quality Inspector Apprentice your role will include inspection of various mechanical and electrical components that are used within a production or trials environment, working to process written procedures and using your knowledge and exper

As Senior Technical Engineering Manager, you will be the principal technical authority for all mechanical and electrical systems across the data centre estate. Senior Technical Engineering Manager. Senior Technical Engineering Manager.

Position: Lead Mechanical Design Engineer.Location: Bourne, Lincolnshire.Lead Mechanical Design Engineer required for a leading sheet metal fabrication business based in Bourne, Lincolnshire.The successful candidate will head up the design team, to provide leadership and guidance to the small team o

Position: Mechanical Estimator.Mechanical Estimator required for an award-winning HVAC company with regional offices throughout the UK, due to continued growth in the project division, our client is seeking a Mechanical Estimator to join their expanding Projects division.The Mechanical Estimator wil

Windsor & Maidenhead Borough,Berkshire.Our client, a long-established contractor specialising in mechanical, electrical, and interior fit-out solutions, is currently looking to appoint an experienced Interiors Project Manager to join their growing team based near Heathrow Airport.This role offers th

Vehicle Technician Responsibilities As a Vehicle Technician, responsibilities will include: Ensure Servicing & Repairs are carried out to Manufacturer Standards Cambelt, Clutch, Gearbox & Engine Repairs/Replacements Electrical & Mechanical Diagnostics Mechanic Warranty Rep

If you are an experience field service engineer, or a service engineer looking to get into the field, please apply now to start the interview process. Fortis are working with an established company to recruit a field service engineer (electro-mechanical) to join their team. The field service enginee

We have a fantastic new opportunity for an ASSISTANT MAINTENANCE MANAGER to be part of our hotel maintenance team and to be responsible for the brand new mechanical and electrical installation at the hotel. Reporting to the Maintenance Manager, you will be primarily responsible for the following :-.

Our client are looking for a experienced Draughtsman with AutoCad experience and a wealth of experience in the Petrochem / Oil & Gas sectors probably gained as a Mechanical Draughts-person.Petrochemical Industry Mechanical Draughting.Pressure Vessel and stack design draughting.General MS & Windows I

Astute's Power Team is partnered with a global company, who specialise with the Energy from Waste industry, to recruit for a Mechanical Technician to join their new EfW Power Station in Slough, Berkshire.

The ideal candidate will be a Mechanical Design Engineer looking to take the next step in their career and work with bespoke and niche products. You will support with new design concepts as well as amending existing designs to ensure continuous improvement. Support with new design and amending exist

This is an opportunity for an experienced Mechanical Design Engineer to join the growing team Benefits for an Mechanical Design Engineer Unlimited holiday Phone & Laptop Ongoing training ProgressionResponsibilities for an Mechanical Design Engineer Take responsibility for the design, sourcing, su

Whether you come from a plant, forklift, HGV, or mechanical engineering background, this role offers a fresh challenge with great long-term potential.

Keywords: Field Service, Field Service Engineer, Service Engineer, Mechanical, Mechanical engineer, maintenance, maintenance engineer, Engineer, Engineering, Installation, install engineer, Medical, Stair Lift, Hospital Bed, Hoist, London, Slough, Harrow, Twickenham, Hillingdon, Uxbridge TPBN1_UKT

Contract Intermediate Mechanical Design Engineer - Building Services.Option to go permanent after 6 months).A client of mine is looking for an intermediate mechanical design engineer on a contract basis.As an Intermediate Mechanical Engineer, you will play a vital role in all stages of this consulta

Field Service Engineers - Heavy Mechanical equipment Locations: Southeast England - Ideally based in Slough, Oxford, Reading, Luton or surrounding areasSalary: £35,000 - £42,000 per annum<br

The world's largest helicopter manufacturer and the UK's premier civil helicopter hub located at Oxford Airport, is seeking skilled Non-Licensed xrnqpay Mechanical Technicians to join their dynamic team!.

Job Description Lead Project Manager (Mechanical / HVAC / Hard FM) £65,000 - £80,000 + Package to be agreed (Car Allowance, Holidays etc) Home, Office and Field Based, Commutable from Heathrow, Slough, Southall, Woking, Reading, Croydon and surrounding areas Are you a Project Manager backgroun

Senior Mechanical Engineer - Building Services.Leading Multi-Disciplinary Projects | Career Progression | Competitive Package.Are you an experienced Mechanical Engineer looking to step into a senior role where you can influence design, lead projects, and shape the future of sustainable building serv

Join a global engineering organisation as a Mechanical Design Manager leading design delivery for data centre and mission-criti. Mechanical Design Manager £135,000£155,000 + Benefits (Fully Remote). Data Centre / Mechanical Design / Building Services / Mission Critical.

Job Description Position: Mechanical Design Engineer Location: Bourne, Lincolnshire Salary: £28,000 - £35,000 Mechanical Design Engineer required for a design and manufacturer based in Bourne, Lincolnshire. Mechanical Design Engineer Position Overview - Int. The successful candidate will be res

Job Description Electrical Installation Engineer (Security Systems) Marlow, Buckinghamshire £45,000 - £55,000 + Training + Progression + Overtime + Bonus + Pension Are you an Electrical Installation Engineer or similar with a background in both Electrical and Mechanical Engineering, looking to

Job Description Position: Lead Mechanical Design Engineer Location: Bourne, Lincolnshire Salary: £40,000 - £60,000 Lead Mechanical Design Engineer required for a leading sheet metal fabrication business based in Bourne, Lincolnshire. The successful candidate will head up the design team, to prov

Are you excited to be part of fast paced and complex projects at the cutting edge of the nuclear industry? If so, then let's shape the future of nuclear together.AtkinsRéalis is one of the world's leading multi-disciplinary consultancy firms offering unparalleled opportunities for individuals in se

We have been awarded a multi-year contract to deliver MEPHFC (Mechanical, Electrical Public Health, Fire and Communications) systems under a design and build NEC 3 Option C contract.

Location - Milton Keynes (Office Based) Contract - Permament Salary + Bonus + iPhone + Pension Plan + Share Scheme + other Benefits Covering 8am – 9pm (40 hours per week), 7 day operation with shift pattern What you become part of: Our Milton Keynes Operations Centre is responsible for the purchase, distribution and refurbishment of all our cold drink equipment throughout GB. Every cooler; vending machine and dispensing equipment comes from here.The Centre is also home to our Contact Centre which is a 364 days a year, 7 days a week operation to support with calls ranging from equipment service requests, new business enquiries and machine movements as well as internal support for our Field Engineering Team and New Business Team. The Telefix team is also based here, offering over the phone support to our customers to help get their equipment functioning. Key responsibilities include: • Timely management of reactive service calls and other supporting services of both CCEP equipment and 3rd party equipment, • Prioritising work in a customer focused manor whilst driving productivity, • Managing part requests that can be sent directly to our customers and any supply issues, by ensuring effective communication to both our internal and external customer, • Assisting Engineers with identifying parts and general queries relating to equipment, • Taking pride in upholding the agreed ways of working to ensure that you are following safety policies and best practices to ensure safe-working for self and to protect others, • Drive a zero accident behaviour, • Experience of Service environment with exceptional customers service skills – both internal and external customers, • Proficient in systems knowledge (e.g. SAP, Salesforce, Microsoft suite, Schematics based systems), • An effective communicator who is capable of building excellent Customer service relationships with a strong focus on problem solving skills, • Self-motivated, enthusiastic with an ability to be flexible and responsive under pressure.

Job Title - Quality Engineer Location – Cambridge Contract - 12 months Working pattern - Hybrid - Cambridge (2.5 days per week / 5 days per fortnight onsite) Salary - PAYE - £16.77 p/h up to £25.98 p/h, Umbrella - £18.79 p/h up to £29.12 p/h SRG are working with a global pharmaceutical company that are seeking a Quality Engineer to join their busy team. Key responsibilities: • Lead design control and risk management activities for combination product development programs, ensuring deliverables are appropriately authored, approved, and maintained to support clinical trials and commercial licensures., • Support and facilitation of effective risk management activities at external design companies and manufacturing facilities related to assigned projects., • Ensure combination product development activities are compliant with quality and regulatory standards, both internal and external., • Provide input and support to design validation including, but not limited to, human factors engineering assessments., • Support the assessment of external design companies and suppliers for capability of quality systems, facilities, and procedures to support device development and supply., • Support device design and manufacturing investigations from devices used in clinical trials and commercial manufacture., • Support the generation of all regulatory submission data and content for assigned device projects., • Support internal and external audits of the DCoE Quality Management System., • Identify, communicate, and develop strategies to improve combination product systems. Basic Qualifications: • BSc, MSc or PhD in appropriate science & engineering discipline (chemistry, biology, biomedical sciences, mechanical engineering, materials sciences, chemical engineering; or other related discipline) with a minimum of 2 years of relevant experience in the pharmaceutical combination product and/or device industries, • History of working in accordance with the requirements of ISO 13485, ISO 14971, 21 CFR 820, 21 CFR 4, and the EU Medical Devices Regulation., • Experience in design controls for combination products., • Device risk management expertise., • Familiar with Human Factors Engineering - Usability Engineering., • Understand project management methodologies and capable to provide technical leadership for projects., • Familiar with device assembling manufacturing processes., • Thorough working knowledge of ISO 9001, ISO 13485, ISO 14971, 21 CFR 820, 21 CFR 4, and the EU Medical Devices Regulation., • Working knowledge of EN 62366, EN 60601, and EN 62304., • Able to learn and apply established procedures in a reliable and consistent manner., • Capable of working independently with minimal supervision.

Joining our Engineering team means being at the heart of a complex operation whose size, scale and reputation for innovation are unique. City & Guilds/NVQ Level 3 (or equivalent) in a mechanical or electrical engineering discipline. Strong hands-on experience, gained within an engineering environmen

Criterion Hospitality is a forward-thinking, guest-focused hospitality group renowned for creating exceptional living environments across our residential and hotel portfolio. We take pride in delivering high-quality accommodation, outstanding service, and safe, well-maintained properties for all residents. We are now seeking an experienced Residential Maintenance Supervisor to join our team and play a key role in ensuring our buildings remain safe, functional, and well-presented at all times. The Role As the Residential Maintenance Supervisor, you will lead the day-to-day engineering and maintenance operations across our residential estate. You will supervise a small maintenance team, manage contractor performance, and ensure all preventative and reactive maintenance tasks are completed to the highest standards. This is a hands-on role suited to someone with strong technical knowledge, excellent communication skills, and a passion for delivering great service in a residential environment. Key Responsibilities • Oversee and coordinate all planned preventative maintenance (PPM) and reactive repairs across the property., • Supervise a team of maintenance operatives, providing leadership, support, and task allocation., • Ensure all building systems (mechanical, electrical, plumbing, fire safety, HVAC) operate effectively and are compliant with statutory regulations., • Conduct regular property inspections, identifying risks, defects, and improvement opportunities., • Manage contractors and suppliers, ensuring high-quality workmanship, safe practices, and adherence to SLAs., • Maintain accurate maintenance logs, records, and compliance documentation., • Respond promptly to resident requests, ensuring issues are resolved efficiently and professionally., • Support refurbishment, upgrade, and project works as required., • Promote a culture of safety, quality, and outstanding resident experience. About You • Previous experience in a maintenance supervisor or senior maintenance technician role, ideally within residential, hospitality, or commercial buildings., • Strong technical knowledge across building services (electrical, plumbing, heating, general repairs)., • Excellent organisational and problem-solving abilities., • Confident in leading a team and managing contractors., • Strong communication skills with a customer-focused approach., • Ability to work proactively, think ahead, and remain calm under pressure., • Relevant trade qualification (electrical, plumbing, HVAC or similar) – desirable.

Cpl Life Sciences are partnered with pharmaceutical manufacturer based in Liverpool, recruiting a Process Technician for a 6-month contract position. This is a hands-on role supporting critical manufacturing operations, utilities, and materials handling within a highly regulated GMP environment. The role operates on a 2 days / 2 nights / 4 off shift pattern and is Inside IR35. Key Responsibilities • Monitor plant equipment and systems to ensure compliance with environmental, GMP, and safety regulations, • Complete GMP documentation accurately and in line with regulatory and legislative requirements, • Maintain high standards of safety, quality, and housekeeping in accordance with site procedures and cGMP expectations, • Report safety, quality, and compliance issues via incident, near-miss, and deviation reporting systems, • Work collaboratively within a multi-functional team and liaise cross-functionally to support operational objectives, • Complete all mandatory training and contribute to continuous improvement activities, including Lean, 5S, and waste reduction initiatives Role Requirements • Experience working in a chemical, pharmaceutical, or biotechnology manufacturing environment, • Background in a process or engineering support role, • Ability to work in a cGMP- and HSE-regulated environment with an understanding of FDA, MHRA, HSE, and Environment Agency requirements, • Strong written and verbal communication skills, • Mechanical aptitude with knowledge of electrical and mechanical equipment, • Ability to follow complex procedures and work effectively under pressure

Head of Mechanical Maintenance £70,967 - £83,926 per annum plus responsibility allowance and on call allowance. Parliament and the Palace of Westminster is one of the most iconic and significant estates portfolios in the world. It is home to one of the busiest parliaments, operating on a World Heritage site which attracts visitors from all over the globe, with more than a million people passing through its doors each year. The Parliamentary Maintenance Services Team (PMST) are accountable for the maintenance of the UK Parliamentary Estate, consisting of buildings that range from the historic Palace of Westminster to the modern Portcullis House, located within a UNESCO World Heritage site, spanning four conservation areas. The Head of Mechanical Maintenance is a senior leadership role within the Parliamentary Maintenance Services Team (PMST), responsible for managing the ongoing testing, maintenance, repair and lifecycle replacement of the estates mechanical systems utilising a team of mechanical technical officers, craft persons and contractors in order to meet agreed KPIs and maximise operational availability and ensure safe operation. Operating at A1 level, the role demands strategic oversight, technical expertise, and high-profile stakeholder engagement to ensure the safe and effective delivery of services. To be a success in the role, we are seeking an individual with outstanding stakeholder engagement and team leadership skills, and who is results focused and customer-centric in approach. The candidate brief can be viewed and downloaded at Head of Mechanical Maintenance. For a confidential discussion, please contact our retained advisors Michael Hewlett or Connor Humpage at The Management Recruitment Group on or Closing date for applications is Sunday 7th December 2025. The Management Recruitment Group have been exclusively retained for this appointment. All direct and third-party applications will be forwarded to them.

Description Join us in the Amazon Reliability Maintenance Engineering team. We maintain and optimize technologies in the Global Amazon Warehouse & Delivery Network. Purpose Of The Job We are looking for motivated, customer-focused people who want to join our team as a Senior Reliability Maintenance Engineering Technician. The focus of the Senior Reliability Maintenance Engineering Technician role is to ensure safety regulations and policies are adhered to, to ensure preventative maintenance is conducted on time to a high standard and to provide high levels of equipment availability through continuous improvement. Shift Pattern: This role includes working in non-traditional shift pattern, which may include nights and weekends. Responsibilities • Role model health & safety best practices and monitor those around them to ensure they follow the example they set., • Work in a hands-on manner and demonstrate SME (Subject Matter Expert) levels of knowledge on all MHE (Material Handling Equipment) in the building., • Coach and mentor the technicians on shift., • Support the line manager and to supervise the shift in their absence., • Provide high levels of equipment availability to our internal customers by means of troubleshooting and prioritizing., • Support continuous improvement of systems in a standard manner across the EU network., • Develop and maintain a good working relationship across all levels in the organization., • Understanding of OEE (Overall Equipment Effectiveness) and equipment performance metrics., • Experience working as a technical lead, • Experience in electrical or mechanical engineering, • Experience with complex automated material handling equipment, packaging technologies, and systems and high-speed manufacturing, • Experience in English-language communication skills, both written and verbal, • Experience working in a multi-contractor and multi-site working environment, • Understanding of PLC based controls systems and statutory compliance requirements, • Experience using computerized maintenance management systems to plan proactive maintenance and record reactive tasks

About Us WHAT WE ARE LOOKING FOR Rheinmetall Weapons and Ammunition UK (RWM UK) is part of the defence engineering company Rheinmetall AG based in Germany. We design, manufacture and support military large-calibre weapon systems used by the British Army and international customers. About The Role RWM UK is now starting a new production site in Telford and we are recruiting for Maintenance Specialist (Mechatronics) who will be responsible for the maintenance of machines and equipment for the production of large-calibre weapon systems. Important: A training may take place at the main plant in Unterlüß (Germany), while for other work steps, intensive on-site training will be provided. Position Responsibilities: • Carrying out routine and emergency repairs to machines and further equipment, • Implementation of new installations, conversions and adaptations of hardware and software, • Ensuring the operational readiness of work equipment and workplaces, • Inspection, maintenance and repair of operating equipment, • Planning and implementation of preventive maintenance, • Maintain detailed logs and reports of all maintenance work performed, • Give input for continuous improvement of related processes, worksteps, tools, etc. to improve overall performance, • Compliance with health and safety regulations in the workplace and during the implementation of repair and maintenance measures, • Support and work closely with production, production planning, tool department and external contractors to fix issues with machines and equipment, • Ability to diagnose issues and find appropriate solutions, • Completed vocational training as an industrial mechanic, mechatronic technician or in a comparable field, • Competent in identifying electrical and mechanical problems and find a quick and safe way to solve them, • Ability to read and understand specifications, technical drawings, work instructions and test procedures., • Professional experience in maintenance at an industrial company for CNC machining, • Competent in using jigs and fixtures and a wide range of hand tools and equipment, • Competent in use of measuring equipment, • Ability to work with minimal supervision, as part of a Team, or individually., • Motivated and disciplined with an excellent work ethic, technical aptitude, continuous improvement mind-set and can demonstrate attention to detail., • Motivated to set up a new production for large calibre weapons systems in the UK (Telford), • Knowledge in the fields of electronics and machining, • Crane and FLT licence

Key Responsibilities • Design and specify mechanical systems for generator and power infrastructure projects, including fuel, cooling, exhaust, and ventilation systems., • Support project delivery from initial handover through to installation and commissioning., • Provide technical support to Engineering, Projects, and Sales teams during pre-contract and delivery phases., • Produce mechanical design documentation, including drawings, calculations, specifications, method statements, and risk assessments., • Liaise with suppliers and subcontractors to ensure equipment compliance with project requirements., • Review technical submissions and ensure alignment with industry standards and client specifications., • Attend site visits, factory acceptance tests, and commissioning activities as required (UK and/or Europe)., • Contribute to continuous improvement of engineering standards, processes, and documentation., • Support preparation of Operations & Maintenance manuals and as-built documentation. Qualifications & Experience • Degree in Mechanical Engineering or equivalent qualification., • 3–5 years’ experience in a Mechanical Engineer or Mechanical Design Engineer role ideally on data centre projects., • Experience working on generator systems, engines, HVAC, fuel systems, or power infrastructure projects (desirable)., • Proficiency in AutoCAD and/or other mechanical design software., • Understanding of relevant UK and international mechanical standards., • Strong communication skills and ability to work across multidisciplinary teams. Benefits • Private health insurance, • Performance-related bonus, • 25 days’ annual leave plus bank holidays, • Birthday leave, • Pension scheme, • Hybrid / flexible working options

Role description At Tata Technologies we make product development dreams a reality by designing, engineering and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth we are now recruiting for a Lead Engineer – Underfloor Systems to be based at our customer’s site in Gaydon. Our Engineering Research and Development department (ER&D) is a fast growing function within Tata Technologies Limited that is assembled to work on exciting projects globally for multiple customers. It comprises highly specialized engineers across Automotive, Aerospace and Industrial Heavy Machinery. The Role: As the Lead Engineer for Underfloor Systems, you will be responsible for the design, development, and integration of all underbody components beneath the vehicle floor. This includes structural panels, aerodynamic shields, NVH treatments, thermal protection, and mounting interfaces. You’ll lead cross-functional teams to ensure these systems meet performance, durability, and manufacturing requirements while supporting vehicle safety, efficiency, and refinement. Area of Responsibility System Ownership: · Lead the engineering development of underfloor systems including floor pans, tunnel reinforcements, heat shields, aerodynamic panels, and NVH insulators. · Ensure robust integration with chassis, powertrain, exhaust, and body structures. Cross-Functional Collaboration: · Work closely with Vehicle Architecture, Manufacturing, Thermal, NVH, and Safety teams to deliver optimized solutions. · Support virtual builds, physical prototypes, and launch activities across global sites. Supplier & Material Management: · Engage with Tier 1 and Tier 2 suppliers to manage tooling, materials, and delivery timelines. · Evaluate and approve materials for weight, cost, corrosion resistance, and thermal performance. Performance & Compliance: · Ensure underfloor systems meet crashworthiness, thermal shielding, aerodynamic, and acoustic targets. · Validate compliance with global safety and environmental regulations. Innovation & Sustainability: · Drive adoption of lightweight materials, modular designs, and sustainable manufacturing practices. · Explore new technologies such as active aero panels, composite shields, and recyclable insulators. Issue Resolution & Quality: · Lead root cause analysis and resolution of engineering issues during development and post-launch. · Support warranty investigations and continuous improvement initiatives. Knowledge / Experience · Bachelor’s or Master’s degree in Mechanical Engineering, Automotive Engineering, Materials Science or related discipline. · Strong experience in automotive body or chassis systems, with a focus on underfloor components. · Strong proficiency in CAD tools (e.g., CATIA V5), PLM systems (e.g., Teamcenter), and CAE validation processes. · Proven leadership in cross-functional teams and supplier engagement. · Excellent communication, project management, and problem-solving skills. In return for bringing your expertise to our business we offer a competitive salary along with excellent benefits including: · Pension Scheme – We match employee contribution up to 5% of salary · 25 Days’ Holiday · Private Health Care · Tata Jaguar Land Rover Privilege Scheme - up to 20% off new JLR vehicles · Group Income Protection · Health Assured – Employee Assistance Program · Group Life Assurance · Health Shield – Private Health Cash Plan If you are passionate about bringing innovation to the projects you work on and want to join a global company, then this is the place for you. Tata Technologies: Engineering a better world. Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

About the Company - At CoMind, we are developing a non-invasive neuromonitoring technology that will result in a new era of clinical brain monitoring. In joining us, you will be helping to create cutting-edge technologies that will improve how we diagnose and treat brain disorders, ultimately improving and saving the lives of patients across the world. About the Role - As a Product Support Engineer, you will support our fleet of devices deployed both externally and internally. You will apply your technical and tactical expertise to lead root cause investigations to solve critical path issues. You will lead life cycle engineering efforts across electronics and mechanical domains, and work collaboratively with software and optics engineers to diagnose issues, implement durable fixes, and ensure fleet reliability for internal and external users. Additionally, you will support the product development organisation to transfer our next-generation neuromonitoring product from development into manufacturing. You will create work instructions and test protocols, develop test fixtures and service tools, and provide design-for-serviceability feedback during design and development. At CoMind, all team members work at least 4 days per week from our new Kings Cross offices, plus a flexible work-from-home day. Responsibilities: • Become the subject matter expert for our existing devices, owning the lifecycle management of the hardware system, • Diagnose and troubleshoot issues across electronics, mechanical, and software subsystems., • Perform root-cause investigations and implement corrective actions for recurring issues., • Maintain configuration control of prototype hardware, software, and test setups., • Support internal and external prototype deployments by ensuring readiness, reliability, and quick turnaround of fixes., • Work closely with electronics, software, mechanical, and optical engineering teams to understand subsystem interactions and resolve cross-discipline issues., • Collaborate with manufacturing partners and suppliers to resolve production difficulties or quality issues., • Participate in technical design reviews and documentation efforts. Skills & Experience: • 5+ years experience in a product support, field service, systems, sustaining, or manufacturing/production engineering role, • Hands-on experience troubleshooting electronics and software issues; comfort working with mechanical assemblies., • Strong ability to understand and support existing hardware and software designs, • Experience performing root-cause analysis and implementing corrective/preventive actions in a regulated environment, • Proficiency creating engineering documentation such as work instructions, service procedures, and test protocols., • Strong test, measurement, and debugging skills using standard lab equipment (oscilloscopes, DMMs, etc.), • Ability to manage and triage multiple concurrent issues across a fleet of devices, • Excellent written and verbal communication skills with both technical and non-technical team members, • Familiarity with project management tools such as Jira and Confluence, • Background in electronics engineering or embedded/software-adjacent roles., • Familiarity with optics or optical instrumentation., • Experience in regulated industries, medical devices, or familiarity with standards such as IEC 60601, ISO 13485, or similar., • Experience supporting transfer to manufacturing or managing product life-cycle improvements. Benefits: • Company equity plan so all employees share in the success of the company, • Salary-sacrifice pension scheme, • Private medical, dental and vision insurance (medical history disregarded), • Group life assurance at 4x annual income, • Comprehensive mental health support, including unlimited access to 1:1 sessions with trained professionals, • Unlimited holiday allowance (+ bank holidays) and one week of remote working per quarter, • Free lunch twice per week via JustEat and free dinner on those days where you need to work later, • Twice weekly deliveries of fresh fruit and a comprehensive selection of snacks and drinks, • YuLife subscription, allowing you to turn your daily steps and meditation into discounts at a range of stores, • Access to Udemy for upskilling and professional development

The Vacancy Location : Flexible Vacancy Type : Contract/Freelance or Permanent Binnies, an RSK company are recruiting Senior CAD/BIM Technicians to join our teams based in Central Scotland, Redhill and the South East of England. Our CAD team are vital in supporting frameworks with Scottish Water, Anglian Water, Southern Water and Thames Water AMP programmes. The CAD Technicians will be accountable to support the Design Lead and other team members in delivering detailed design services including production of models and drawings using Civil 3D, Revit and AutoCAD. We have offices in Redhill, Glasgow, Chester and Birmingham, however we also fully support Hybrid/Remote working so would be keen to hear from those based across the UK Key responsibilities: • Work to Binnies project controls guidelines and procedures. Including our Common Data Environment (CDE), Projectwise., • Support the Design Lead/CAD Manager and other team members in undertaking a wide range of design related tasks., • Undertake design, and modelling activities, using the software packages detailed below., • Produce comprehensive and accurate construction deliverables, typically 2D Drawings, developed from 3D Models., • Work under limited supervision performing complex technical work., • Comply with the Binnies IMS, CDM regulations and other relevant Safety and Environmental legislation., • Maintain high technical standards, consistent with the project brief and compliance with Binnies HSEA requirements., • Help with the supervision of junior technicians to ensure timely design outputs are in accordance with programme and quality requirements., • Water / Wastewater project background., • Revit – Model Coordination & Linking, Complex Structures, Pipe Systems with Auto Routing, Mechanical Detailing, Tagging, Schedules & Annotation., • Civil 3D – Surfaces, Pipe Networks, Pressure Pipe Networks, Corridors, COGO Points, Data Shortcuts and External References., • Minimum of HNC or equivalent, in a relevant discipline., • Would you like to work in a business where you feel empowered to grow? Where there is no place for criticism or discrimination? A place where people are mindful and respectful? If so, then Binnies is the place for you.

This role places you at the heart of the UK’s transition to Net Zero, enabling the safe and timely delivery of critical maintenance and major electricity transmission projects. You’ll shape the Year Ahead Tactical Plan for a complex regional network, helping ensure reliable power for communities across the Midlands and East Anglia. Your work will have real, visible impact, supported by collaboration with skilled teams and ongoing professional development, including support towards IET registration. As a Planning Engineer, you’ll collaborate across the entire business to deliver innovative solutions that shape the future of energy. In this role, you’ll be responsible for planning operations resource and shaping the Year Ahead delivery plan with key stakeholders and to do this, you will combine data analysis, practical thinking and solution optioneering to drive effective decisions and deliver key priorities on our journey to Net Zero. You’ll help ensure the right work is delivered at the right time. What You’ll Be Doing • Analyse complex data to forecast resource needs, identify risks, and prioritise critical works., • Collaborate with operations, projects, and wider stakeholders to align priorities and agree achievable plans., • Develop practical solutions to planning constraints and delivery challenges., • Coordinate plan build activities, manage timelines, and promote transparency and performance excellence. Requirements • ONC / NVQ Level 3 (or higher) in Electrical or Mechanical Engineering or the relevant experience., • Experience in a Planning role within a Utilities or Logistics focused business., • Understanding of Asset Management Principles., • Confident in leading and chairing stakeholder engagement meetings, • Experienced in using Excel and Power BI to manage various datasets to provide valued business insights. Location & travel The team is primarily based at Berkswell Substation (Midlands), with travel across the Central England region including East Anglia. Pay And Benefits • Starting salary £47,442 - £60,000 pa + Bonus + Paid overtime., • 37 Hours per week Monday to Friday., • 26 Days leave plus 8 statutory days, an excellent contribution pension scheme – max total 18%., • Job requirement Company car (Full Electric or Hybrid)., • For more information on benefits click the link - Benefits | National Grid Careers Visa and relocation package is not available for this role. If you want to make a tangible impact on the future of the UK’s energy network, we’d love to hear from you.

Hims & Hers is the leading health and wellness platform, on a mission to help the world feel great through the power of better health. We are redefining healthcare by putting the customer first and delivering access to care that is affordable, accessible, and personal, from diagnosis to treatment to delivery. No two people are the same, so we provide access to personalized care designed for results. By normalizing health & wellness challenges and innovating on their solutions, we’re making better health outcomes easier to achieve. Hims & Hers is a public company, traded on the NYSE under the ticker symbol “HIMS.” To learn more about the brand and offerings, you can visit hims.com/about and hims.com/how-it-works . For information on the company’s outstanding benefits, culture, and its talent-first flexible/remote work approach, see below and visit . About The Role We are seeking a hands-on and detail-oriented Project Engineer to lead construction, cleanroom installation, and facility enhancement projects across pharmaceutical compounding and warehousing operations in the UK. This role will be pivotal in coordinating design, construction, and installation activities — including cleanroom buildouts, office renovations, warehouse racking, and signage — ensuring full compliance with EU GMP Annex 1, ISPE, and MHRA requirements. The ideal candidate will have a strong background in engineering project execution and proven experience managing vendors, contractors, and cross-functional teams (Safety, Operations, Quality, and Validation). You Will Project Execution & Oversight: • Oversee and execute multiple capital and renovation projects including cleanroom construction, warehouse layout upgrades, office refurbishments, and racking or signage installations., • Develop and manage detailed project plans, budgets, and timelines ensuring scope, cost, and schedule adherence., • Conduct site supervision, contractor coordination, and progress inspections, maintaining high standards of quality and safety., • Lead commissioning and qualification readiness, supporting IQ/OQ/PQ documentation for cleanroom and utility installations., • Participate in design and layout review meetings for cleanrooms, HVAC systems, material flow, and warehouse operations., • Coordinate with architects, mechanical/electrical consultants, and validation engineers to align technical specifications and design intent., • Review design documentation, drawings, and vendor submissions to ensure compliance with EU GMP, ISPE, and MHRA expectations., • Source, assess, and coordinate construction vendors, cleanroom installers, and equipment suppliers through all project phases., • Review and evaluate vendor proposals, bids, and FAT/SAT documentation for adherence to design and GMP standards., • Track punch list completion, deviation management, and change control through structured review processes., • Partner closely with Safety and Operations teams to uphold UK HSE and Construction (Design and Management) Regulations (CDM 2015) compliance., • Liaise with Quality Assurance and Validation teams to ensure facility readiness for regulatory inspections and audits., • Prepare and maintain comprehensive documentation: project charters, RFIs, meeting notes, change control logs, deviation reports, and as-built records., • Ensure engineering drawings and construction documentation align with ISPE guidelines., • Bachelor’s degree in Mechanical, Electrical, Industrial, or Chemical Engineering, or equivalent technical discipline., • 5+ years of experience delivering engineering or construction projects within pharmaceutical, life sciences, or cleanroom environments., • Proven experience with construction and equipment installations, and facility upgrades., • Working knowledge of: EU GMP Annex 1 and Annex 15 (Qualification & Validation), ISPE, MHRA Orange Guide, UK Building Regulations, and HSE/CDM 2015 compliance., • Strong understanding of GMP, validation lifecycle, and commissioning principles., • Proficiency in AutoCAD, MS Project, and Microsoft Office Suite., • Excellent communication, stakeholder management, and problem-solving skills., • Experience in warehouse layout design, industrial racking systems, or facility automation projects., • Competitive salary & equity compensation for full-time roles, • PTO and company holidays, • Employee Stock Purchase Program (ESPP)

About us Rivan Industries (Rivan.com) is a synthetic fuel company designed to decarbonise heavy industry. We aim to make synthetic fuel cheaper than fossil fuels and sustain life on earth by keeping the CO2 locked underground. We design and manufacture modular synthetic fuel plants consisting of a DAC system, an Alkaline Electrolyser, and a Sabatier Reactor, whilst vertically integrating with off-grid DC solar and the European gas-grid. Here’s our entire business plan. We’ve recently deployed the UK’s largest synthetic fuel plant and are planning to 1000x this scale in the next 2 years. Distilled down, the Rivan system is a large amount of stainless steel with a crazy amount of entropy. We must fight that entropy with great design and integration to drive down the costs and increase our ability to manufacture at scale. We’re looking for a talented Senior Mechanical Engineer to come and own one of our sub-systems to drive that forward, tasked with uncovering new ways of thinking about our system integration, performance and longevity. If you thrive on a lot of responsibility and tight deadlines, come and build! The role: Own the design and manufacture of an entire Rivan sub-system • This will be across our reactor, electrolyser and DAC modules, touching on cooling, heating, compression, mass-transport, fluidic, filtration, and many other sub-systems, • Iterate on original concept and own design reviews, • Own technical requirements, P&ID’s, PFDs and test plans, • Design test-rigs to validate underlying hypothesis quickly and cheaply, • Own the assembly, integration and commissioning of that sub-system Core skills: • 5+ years professional experience, • Bachelor’s or Masters in mechanical/aero or related field, • Fundamental thermofluids understanding, heat and mass transfer, chemical kinetics, • System design experience including component sourcing, CAD (SolidWorks), design for manufacture/assembly., • Simulation/analytical modelling competency, • Test setup design, running of experiments and data analysis Specifics: • £70-90k Salary depending on experience, • Significant share options as part of the early team, • In-person work at our HQ in Bermondsey, South-East London, • Extensive relocation support, including £6000 per year extra to live close to our HQ, • Unlimited time-off Apply at Rivan.com

About The Job Mercor connects elite creative and technical talent with leading AI research labs. Headquartered in San Francisco, our investors include Benchmark, General Catalyst, Peter Thiel, Adam D'Angelo, Larry Summers, and Jack Dorsey. Position: Engineering Problem Designer Type: Independent Contractor Compensation: $60–$80/hour Location: Remote Duration: Approximately 2 months Commitment: 20–40 hours/week Role Responsibilities • Design original, advanced engineering problems requiring creative reasoning and multi-domain integration., • Evaluate AI-generated engineering solutions for technical accuracy and adherence to constraints., • Identify logical gaps and incorrect modeling assumptions., • Provide well-documented solutions using LaTeX for equations and schematics., • Maintain high standards of technical precision and conceptual depth., • Advanced degree in mechanical, electrical, civil, aerospace, or chemical engineering, or equivalent experience., • Experience designing or grading complex analytical problems., • Participation in or mentorship for engineering competitions., • Research or teaching experience in applied problem formulation., • Deep understanding of core engineering principles and real-world systems., • Ability to communicate step-by-step reasoning and assumptions clearly., • Strong intuition for problem difficulty and conceptual progression., • Submit resume or CV., • 20–30 mins interview., • Complete a brief form outlining experience., • Independent contractor arrangement., • Upload resume, • AI interview based on your resume

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. We Offer You More Than Just “A Job” • Professional Development – To advance the capabilities of our people, we offer a wide variety of experiences to support our employees’ professional growth and continuous learning., • Total Rewards – We offer comprehensive programs for compensation, benefits, recognition, learning and development, work-life integration and corporate citizenship., • Watermark – Watermark is our corporate social responsibility program working to provide education and access to safe water to ensure healthy lives, gender equality, and resilient communities. Employees have the opportunity to learn and volunteer on various water-related projects., • Develop innovative solutions to technical challenges for internal and external clients, • Work in a collaborative way in small multidisciplinary teams to deliver strong technical solutions, • Conduct research on relevant technology fields to inform development decisions, • Work from pencil and paper ideas to simulation, lab testing and deployment, • Lead technical problem-solving with a hands-on approach, • Manage projects effectively, balancing time, budget, and client expectations, • Our colleagues in Xylem across the whole water industry looking for innovative solutions to include in their product portfolio, • Our external customers looking for their next breakthrough product development, • Work in an agile, small-company environment with the backing of a global corporation, • Thrive in a supportive, fluid team structure that encourages knowledge sharing and cross discipline collaboration, • Fast-paced, project-based environment provides opportunities for motivated people to get involved in all aspects of delivery and to develop into new technical areas, • Continuous training opportunities to learn new and hone existing skills, • Excellent academic record (1st class or 2.1 degree in physics, maths, or engineering), • 3 or more years of experience in a relevant technical role, • Broad understanding of fundamental physics and ability to apply them to the real world, • Strong mathematical and data analysis skills, • Comfortable hands on designing and running experiments, • Understanding of the physics of sensing and measurement techniques, • Experience with new product development, • Experience with Python, Embedded C, Matlab, Simulink, • Background in electronics and signal processing, • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Office: Standard office equipment; work usually performed in an office or site laboratory setting, • Estimated up to 10% travel requirement