Trabajos part time technical en Bradford - Page 2Crear alertas

This part-time role involves overseeing multi-site visits, conducting assessments, and providing technical support.

Qualified Supervisor (EV Charging) We Power Your Car is a fast-growing electric vehicle (EV) charging supply and installation company, based in Yorkshire and operating nationwide. We design and deliver EV charging solutions for both domestic and commercial customers, supporting them at every stage of their journey. As part of our continued growth, we’re excited to welcome a Qualified Supervisor to join our Field Services team. This is a hybrid role offering a mix of time at our Bingley office site visits with some overnight stays around the country. Reporting to: Head of Field Services – Carl Cleary Hours: Full-time, 42.5 hours per week (Monday to Friday, 8:00am–5:00pm) Location: Bingley office BD16 1WA Salary: Competitive, dependent on experience (DOE) About the Role You’ll play a key role in maintaining high standards across our installations while supporting and developing our field teams. You’ll be responsible for auditing work, ensuring compliance with electrical regulations, and acting as a trusted technical point of contact. As well as working with our customer service and scheduling teams to ensure a great customer experience is achieved. What You’ll Be Doing • Auditing EV charger installations completed by in-house electricians and sub-contractors, • Reviewing and signing off Electrical Installation Certificates and Minor Works Certificates in line with BS7671 and NICEIC requirements and Part P notifications., • Play an active part in training and onboarding new starters., • Working collaboratively to improve workmanship, safety, and processes, • Supporting and managing a team of electricians, • Providing technical support to installation and customer service teams, • Conducting site visits, audits, and regular one-to-ones, • Ensuring incidents are logged in line with company procedures, • Coordinating team availability with the scheduling team Essential: • Full UK driving licence, • Ability to pass a DBS check, • 18th Edition Wiring Regulations, • NVQ Level 3 in Electrical Installation (or equivalent), • City & Guilds 2391 Inspection and Testing, • ECS Gold Card – Approved status, • EV Charging qualification 2919 – Desirable, • Minimum 5 years in the electrical industry, • At least 1 year as a Qualified Supervisor What We Offer • Company laptop, • Workwear, • Company mobile phone, • Access to a company vehicle

Company description: Water Utility Company based in Yorkshire region of England. Job description: Lead Design Engineer (Bioresource - Process) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience from £48,249 to £60,314. Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year). Attractive pension scheme (up to 12% company contribution). Development opportunities in line with the Lead Design Engineer progression plan. 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary. A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme. Online GP service, cycle to work scheme, gym membership discounts and many more! Location : This role will initially be based in Bradford but were moving our office to Leeds Valley Park in Summer 2026, so youll be based there in the future (hybrid working minimum 1 day per week in the office). Work type: Permanent. 37 hours per week, Monday Friday. What we do! Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Our Engineering Design team are a key part of how we plan to meet the changing expectations of customers and regulators. This role is a fantastic opportunity for someone who is passionate about engineering excellence, thrives in a collaborative multi disciplinary environment, and wants to play a central part in shaping the future of water infrastructure. Our Engineering Design Team sits at the heart of our capital programme. We lead the technical definition, governance and design of projects across water, wastewater, bioresources, nature based solutions, networks, treatment and beyond. We are building a Design Authority and Engineering centre of excellence that will set the standard for how Yorkshire Water designs and delivers infrastructure. Where you fit in! As our Lead Design Engineer (Bioresources - Process)you will: Bring at least 5 years process design experience, with strong technical capability in bioresources handling and treatment infrastructure, contributing specialist expertise to complex engineering design projects. Be part of a multidisciplinary engineering team, carrying out process engineering design work across bioresources and wastewater programmes while supporting high-quality delivery throughout the full project lifecycle. Work closely with the Strategic Planning Partner, Design Partner and Delivery Partners, providing technical oversight and ensuring high-quality design outputs from concept through to detailed design. Deliver proficient and efficient engineering design support in full compliance with the Yorkshire Water Engineering Specification, design guidance, legislation and relevant British and European Standards. Review process engineering design documents produced by strategic planning and delivery partners, supporting a robust end-to-end project delivery process and maintaining technical integrity. Support design governance processes, including design reviews, value engineering sessions, constructability assessments and HAZOP/HAZCON workshops, ensuring safe, compliant and efficient design solutions. Develop technically and economically proficient engineering solutions aligned with TOTEX and whole-life cost and carbon principles. Liaise with suppliers, technical planning and procurement teams on equipment specification and construction activities to improve standardisation and increase the use of Design for Manufacture and Assembly (DfMA). Drive innovation, continuous improvement and engineering excellence across all process design work. Provide leadership, mentoring and technical guidance to junior engineers and graduates, contributing to capability development within the engineering design team. Maintain excellent standards of health and safety in design, ensuring effective risk management and full compliance with the Yorkshire Water Safety Policy. Report to the Senior Process Engineer, ensuring clear communication, technical alignment and effective coordination across multidisciplinary design projects. What skills and qualifications you will need: Bachelors or Masters degree in Chemical Engineering (or related discipline). Chartered or working toward Chartered status (IChemE or equivalent preferred). At least 5 years process engineering design experience within the wastewater sector (in particular bioresources). Experience of working in a multi-discipline design team. A strong attention to detail. Commitment to safety, sustainability, and high-quality engineering design. Excellent written and verbal communication skills, including the ability to communicate complex technical concepts into more readily understood information suitable for a wider business audience, able to influence people across multifunctional teams throughout the business. Experience of working on multiple deliverables to project deadlines. Experience in the application of quality procedures and document control in engineering design. Full valid driving license with less than 6 points. Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got experience as a Lead Design Engineer (Bioresources - Process) and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Please apply online and complete the application process by uploading an up-to-date copy of your CV and cover letter outlining your relevant experience for the role. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Closing date for this role is 29th March 2026. No agencies please. TPBN1_UKTJ

We are the internal recruitment partner for our client, a well‑established UK manufacturing organisation specialising in building products. We are searching for an experienced Multiskilled Maintenance Engineer with a strong electrical background to join their on‑site engineering team. This is a hands‑on role, supporting a wide range of production machinery, facilities equipment, and new engineering projects across the factory. Working as part of a small but highly skilled engineering team, you will play a key role in maintaining machinery uptime, diagnosing faults, carrying out planned maintenance, and ensuring all equipment remains safe, reliable and efficient. Responsibilities: Diagnose, troubleshoot and repair electrical and mechanical faults on production machinery Maintain, service and modify equipment to improve safety, reliability and efficiency Conduct planned maintenance and respond to urgent breakdowns Work on polystyrene cutting machines, CNC hot‑wire systems, sensors, switches and 3‑phase equipment Perform testing, commissioning and fault‑finding on plant and systems Support installation and integration of new machinery Provide technical advice to production teams and recommend machinery improvements Ensure compliance with BS/EN standards, health & safety rules, and site procedures Carry out general site electrical work, including lighting and small equipment repairs Contribute to lean manufacturing, 5S and continuous improvement practicesThe successful candidate will be able to demonstrate the following: Strong electrical bias with experience working on 3‑phase systems, sensors, relays and industrial machinery Confident in diagnosing and repairing electrical and mechanical faults Relevant engineering qualification in Mechanical, Electromechanical or Electrical Engineering 17th or 18th Edition Wiring Regulations (essential) NVQ Electrical qualification & City & Guilds (essential) Good mechanical understanding, including hydraulics and pneumatics Flexible and adaptable to new technologies and machinery Experience with lean manufacturing/5S (advantageous) Welding skills (advantageous)Working Hours & On Call: Monday-Friday: 08:00 - 16:30 Occasional Saturday morning shift: around once per month (06:00 - 12:00) On‑call rota: 1 week in every 5-6 weeks, covering 16:30 - 22:00 (site close) On‑call payment: £75 for weekdays and £150 for weekends (weekend call‑outs are very rare). Overtime is payable at time and a half. If called out, an additional 1 hour of travelling time is paid Overtime is available outside normal weekday working hours as and when required.In return we are offering: Salary: £38,000, rising to £40,000 upon successful completion of 6‑month probation 25 days of holidays (with 2 to be saved for Christmas shut down) + bank holidays Interested? Then APPLY now for immediate consideration

Company description: Water Utility Company based in Yorkshire region of England. Job description: Technical Assurance Manager Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience up to £70,000pa An additional car allowance of £6000pa Annual incentive related bonus up to 15% of salary Attractive pension scheme ( up to 12% company contribution ) 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme Online GP service, cycle to work scheme, gym membership discounts and many more! Location: Leeds/Bradford, hybrid working, typically 1 office / site day per week , pending office move to Leeds (LS10)from Summer, 2026. Work type: ?Permanent. 37 hours per week, Monday Friday We have an exciting opportunity for a Technical Assurance Manager to join the Engineering Team at Yorkshire Water and be instrumental in helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Programme Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. Where you fit in: The Technical Assurance Managers team of both colleagues and specialist consultants provide the Technical Authority and ongoing assurance for our capital projects as well as maintenance delivery and asset modification on behalf of Kelda covering all CapEx and OpEx activity. This role also provides a nominated point of technical assurance contact for the Capital Delivery contractors, consultants and suppliers and is responsible for: Policy & Standards: Define, maintain, and publish technical assurance policies, engineering specifications, and asset lifecycle standards (FEED to decommissioning). Audit & Compliance: Lead technical and regulatory audits of consultants, contractors, and internal teams; assess engineering standards and monitor capital project/MEICA maintenance delivery. Technical Governance: Manage investment gateway reviews, oversee technical query responses, and provide authority on design, construction, and handover acceptance. Risk & Safety: Provide assurance for process and occupational safety, participate in the Process Safety Steering Group, and perform root cause analysis on underperformance or failure. Stakeholder & Performance: Align procedures with Integrated Assurance, mentor staff, manage the Technical Assurance Database, and represent the company with external partners to drive health, safety, and commercial performance. What skills & qualifications you will need: Relevant engineering/technical (level 6 or higher) qualification (Bachelor of Engineering (BEng Hons) / Level 6 NVQ or equivalent) Chartered Status via a relevant technical institute Experience of running a comprehensive Level 2 assurance regime and capital funded programme Trained and qualified as a professional auditor Understanding of regulations and ability to work with SMEs and other TEs to determine and explain degrees of compliance and non-compliance Knowledge of reliability improvement techniques including the use of Failure Mode Effects Analysis (FMEA), Reliability and Operability studies in the development of User Requirements, Design packages and Functional Design Specifications (FDS) Technical oversight of design, construction, commissioning and maintenance activities Participation within process design groups, capital partners with respect to setting standards and conducting Hazard Studies, Access, Lifting and Maintenance Studies, Process Hazard Reviews/Assessments and FMEA studies for complex assets/processes Proven track record in ensuring the application and auditing of sound engineering practices for all elements of an asset lifecycle (design, operate, inspect, maintain, de-commission) Previous experience in an operational and / or strategic leadership role in a commercially orientated and / or regulated environment Commercially aware and able to balance risk and value in all decisions Excellent written and verbal communication skills - including the ability to communicate complex technical concepts into more readily understood information suitable for a wider business audience, able to influence people across multifunctional teams throughout the business Develops and maintains effective internal and external relationships Experience of liaising with regulators such as OFWAT, HSE, DWI, & EA Previous and proven experience of working in an Assurance role Clearly demonstrates the Yorkshire Water company values and behaviours Full, valid UK driving licence You will also benefit from having: Relevant experience of water / wastewater treatment, high hazard chemical/industrial process systems & assets Asset management experience within a large-scale engineering or process related industry Experience of leading and embedding change, able to influence and drive right culture and behaviours Previous experience of ISO55000/PAS 55 Quality Assurance Systems Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got experience as a Technical Assurance Manager and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Just a Heads-up!! We may close this campaign as soon as a suitable candidate is found. We therefore advise that you complete and submit your application as soon as possible. No agencies please TPBN1_UKTJ

Flood Risk & SuDS Engineer Location: Bingley, Warrington, Basildon, or Remote Working Hours: Monday to Friday, 8:45am - 5:00pm Contract: Full-time, Permanent About the Role We are looking for a motivated and technically capable Flood Risk & SuDS Engineer to join our growing team at EPG. This role offers the opportunity to take a leading position in the design and delivery of Sustainable Urban Drainage Systems (SuDS) and Flood Risk Assessments (FRAs) across a diverse portfolio of projects, including residential, commercial, and infrastructure developments. You will play a key role in shaping climate-resilient, low-impact design solutions, working closely with clients from an early stage to understand their needs and deliver collaborative, high-quality outcomes. EPG is committed to supporting your professional development, offering exposure to a wide range of projects and the opportunity to work closely with a highly experienced, multidisciplinary team. Key Responsibilities Lead the design, specification, and implementation of SuDS solutions for a variety of developments Prepare Flood Risk Assessments (FRAs) in line with current UK legislation and planning policy Undertake hydraulic modelling using industry-standard software such as MicroDrainage, Causeway FLOW, or InfoDrainage Produce high-quality technical reports, drawings, and design documentation Ensure designs comply with relevant standards and guidance, including the CIRIA SuDS Manual (C753) and Building Regulations Manage multiple projects simultaneously, supporting delivery to agreed timescales and budgets Maintain high standards of quality, health & safety, and technical compliance Liaise effectively with clients, local authorities, statutory bodies, contractors, and stakeholders Stay informed on emerging best practice, policy, and innovation in flood risk, drainage, and water management Promote climate-resilient and sustainable design approaches across all projects About You Essential Requirements: Degree in Civil Engineering, Environmental Engineering, or a related discipline 2-4 years' experience in SuDS design, flood risk management, and drainage design Working towards, or aspiring to achieve, Chartered status (ICE, CIWEM or similar) Proficient in drainage and design software such as AutoCAD, MicroDrainage, Civil 3D, InfoDrainage, or Causeway FLOW Strong understanding of UK planning policy, SuDS legislation, and design standards Excellent written and verbal communication skills, with the ability to produce clear technical reports and present to stakeholders Highly organised, detail-focused, and committed to quality A proactive, innovative approach to problem solving Strong IT skills, including Word and Excel Desirable: Experience using Tuflow, ICM, or other 1D/2D hydraulic modelling software Experience with 2D/3D highways and earthworks design Experience delivering sectional agreements (S104, S38, S278, S185, S106) Experience undertaking Strategic Flood Risk Assessments (SFRAs) Why Join EPG? At EPG, you'll be part of a respected consultancy known for delivering scientifically robust, cost-effective, and sustainable solutions. We offer a supportive environment where professional development is actively encouraged, collaboration is valued, and your contribution genuinely makes an impact on the built environment and climate resilience. TPBN1_UKTJ

Please review the key dates below and ensure you are available during the relevant stages of the process: Applications open – Monday 2 March 2026 Applications close – Sunday 22 March 2026 Please ensure your application is submitted before 23:59 on Sunday 22 March 2026, as late applications will not be considered. Interview period – Weeks commencing 13 and 20 April 2026 If shortlisted, you will be invited to attend an interview during this window. Please ensure you are available across these weeks. Offer decisions – Week commencing 27 April 2026 Successful candidates will receive a formal offer during this week. Apprenticeship start date – September 2026 The programme will commence in September 2026. Candidates must be available to start at this time. We encourage you to consider these dates carefully before applying to ensure you can fully commit to each stage of the recruitment process and the programme start date. ABOUT USWith 30 years of industry expertise, Apogee supports organisations of all sizes and sectors by streamlining their IT needs through a single point of contact. As an independent subsidiary of HP Inc, we have the advantage of being part of one of the world’s leading technology companies, with instant access to the latest innovation all supported by our market leading service operations. Our core values - Integrity, Passion, Courtesy & Respect, Inclusivity, Knowledge, People, and Flexibility - shape our culture and guide our actions. We prioritise ethical business practices, fostering relationships and promoting diversity and inclusion. Our culture allows you to innovate and develop your career with the support of an expanding corporate and progressive organisation. We are looking for inspiring and pioneering individuals, who want to make a difference in their careers as well as in the world around them. We are proud of all our employees, who are at the heart of what we do. If you become part of our journey, everything is possible, and the opportunities are endless. At Apogee Corporation, we believe that true innovation flourishes when everyone is free to be their authentic selves. As an Equal Opportunity Employer, we are committed to creating an inclusive environment where every unique perspective is valued and celebrated. We draw on the richness of our differences—across age, gender, gender identity, gender expression, ethnicity, sexual orientation, disabilities, religion, and beliefs—because we know that our collective strength lies in our diversity. Here, your individuality drives our shared success, and we actively encourage you to bring your whole self to Apogee. Please take the time to look at our excellent Trustpilot reviews We have been awarded “Customer Experience Foundation Membership” showing our commitment to excellent customer service. JOB DETAILSThis role is subject to an Enhanced Disclosure and Barring Service check. As the position is exempt from the provisions of the Rehabilitation of Offenders Act 1974, applicants must declare all spent and unspent convictions, cautions, reprimands, and final warnings that are not protected under the Exceptions Order 1975. The opportunity As an Apprentice Technician, you will work towards a Level 3 Apprenticeship in Electrical, Electronic Product Service and Installation Engineering. This is a hands-on, customer-facing role where you will build the technical expertise and confidence required to progress into a Service Engineer position. You will gain practical IT engineering experience across a range of sectors, supporting customers both on site and within our operations centre. Working with high-specification printers, laptops, and commercial hardware, you will learn how to install, configure, test, maintain, and repair business-critical equipment. Alongside developing strong fault-finding and diagnostic skills, you will enhance your customer service capability by delivering clear communication and a professional, solutions-focused experience. What you will learn Installation, testing, and safe handling of electrical and electronic products Fault diagnosis and repair across printers and IT equipment Safe transportation and protection of technical equipment End-to-end servicing processes for commercial devices Professional customer engagement and service excellenceAbout the apprenticeship Hours 8.30-5.30 Monday to Friday Level 3 Apprenticeship in Electrical, Electronic Product Service and Installation Engineering Delivered in partnership with Lincoln and Newark College Two-year structured programme Open to applicants of all agesTraining schedule Every six weeks, you will attend Newark College from Monday to Thursday, with Friday allocated to remote learning. Travel and overnight accommodation will be provided during college attendance weeks. Location You will be assigned to an on-site location. Applicants should live within a reasonable and reliable commuting distance. Eligibility Right to work in the United Kingdom. Level 2 qualification in Mathematics and English Language. Applicants who do not already hold these qualifications must be willing to undertake and successfully complete the required Level 2 Functional Skills as part of the apprenticeship. Relevant experience or demonstrable practical interest in engineering, IT hardware, electronics, or a related technical field - this may include work experience, college projects, or hands-on personal interest. Full, valid United Kingdom driving licence, with the ability and confidence to travel to customer sites.Logistics Ability and commitment to attend block release training at Newark College every six weeks, Monday to Thursday, with Friday allocated to remote learning. Residence within a reasonable and sustainable commuting distance of the assigned site. Willingness to accept the National Minimum Wage in line with apprenticeship regulations.Motivation and personal qualities Clear and genuine interest in engineering and technology, demonstrated through application responses. Willingness to learn, develop, and commit to completing a two-year apprenticeship programme. Logical and methodical approach to problem-solving, with resilience when diagnosing faults. Professional, customer-focused attitude with strong communication skills. Reliable, punctual, and accountable in managing workload and travel requirements. Positive, adaptable, and motivated to build a long-term career in field service engineering.BENEFITS Flexible working options 33 days holiday including bank holidays Holiday purchase scheme Enhanced family friendly benefits (maternity, adoption, paternity and IVF) 2 paid days off per year for voluntary work to support our local communities Staff Reward Scheme Pension scheme Life assurance 4 x salary Sponsorship for professional development and memberships Employee Assistance Programme, including access to a virtual GP and financial wellbeing support Mental health first aider support programme Cycle2work scheme Discounted Gym Membership Eye care voucher scheme Free flu vaccinations Employee social events and recognition activities throughout the year HP Employee discount programmes Mobile phone discountsWHY JOIN APOGEEAt Apogee, our values – Integrity, Passion, Courtesy & Respect, Inclusivity, Knowledge, People and Flexibility – shape everything we do. They guide how we work with clients and colleagues, drive ethical practices and create an environment where you can grow, innovate and develop your career within a progressive, expanding organisation. We are looking for inspiring individuals who want to make a real impact in their careers and the world around them. Diversity and inclusion are at the heart of our success. We know true innovation flourishes when people can be their authentic selves. As an Equal Opportunity Employer we welcome applications from all backgrounds, and we actively value different perspectives across age, gender, ethnicity, sexual orientation, disability, religion and belief. Your individuality drives our shared success, and we encourage you to bring your whole self to Apogee. We support flexibility and accessibility. If flexible working is important to you, please include this alongside your salary expectations in your application so we can discuss it early in the process. If you have a disability or health condition and require adjustments during the recruitment process, please contact our Talent Team on (phone number removed) – we are committed to making your experience inclusive and accessible. We are proud to support the Armed Forces community. We hold a Bronze Award in the Armed Forces Covenant and welcome applications from Reservists, Veterans, Cadet Force Adult Volunteers and military families. Our award-winning customer service speaks for itself – take a look at our excellent Trustpilot reviews and our “Customer Experience Foundation Membership” accreditation. Our application form is quick and easy – no need to repeat your entire CV! Apogee may close this advert early if enough applications are received, so we encourage you to apply promptly

Quality (Assurance and Improvement) Lead Full Time – 37.5 hours Homebased with travel across assigned regions (including overnight stays) Salary: £41,899.25 + Car Allowance + Home Working Allowance + Travel Expenses Our Mission: The Best Life Possible Our client is a large care and specialist housing organisation supporting adults with learning disabilities and complex needs, including autism, physical disabilities, mental health conditions and dementia. They are currently undergoing an exciting period of strategic change and are looking for an experienced Quality Assurance and Improvement Lead to play a pivotal role in driving quality, compliance and continuous improvement across services. If you are passionate about raising standards, using data to drive improvement and supporting services to achieve Good and Outstanding regulatory ratings — this could be the perfect next step in your career. The Role Reporting to the Head of Quality and Improvement, you will: Lead and deliver internal audits in line with the Quality Assurance Framework Drive the Quality Improvement Strategy across your allocated regions Support registered services to meet regulatory, statutory and organisational KPIs Provide expert advice on incidents, safeguarding, compliance and risk Analyse trends, themes and data to identify improvement opportunities Support managers to achieve and maintain CQC / CIW compliance Deliver improvement initiatives that enhance outcomes for the people supported Monitor training compliance and governance processes Share learning from incidents, complaints and reviews to embed best practice Work collaboratively with operational and governance colleagues to ensure safe, high-quality services This is a highly visible role requiring strong organisational skills, the ability to influence at all levels and a proactive, solutions-focused mindset. Travel (including overnight stays) is required. About You We’re looking for someone who brings both technical expertise and the ability to inspire positive change. You will have: A Level 5 qualification (or equivalent) in Health & Social Care Experience conducting audits and leading quality improvement work in health and/or social care Strong working knowledge of CQC / CIW regulations and inspection frameworks Experience analysing data and producing meaningful reports A solid understanding of compliance, governance and risk management systems Excellent communication skills, with the ability to build strong stakeholder relationships The confidence to make evidence-based, risk-informed decisions Desirable (but not essential): Recognised audit qualification (ISO, Lean Six Sigma or similar) Project management experience Experience leading services rated Good or Outstanding Why Join Our Client? Competitive salary with car allowance and home working allowance A key strategic role within a values-driven organisation Opportunity to shape and influence quality across multiple services Work within a collaborative Quality & Governance team Make a genuine impact on the lives of people with learning disabilities If you are motivated by continuous improvement, thrive in a dynamic environment, and want to ensure people receive safe, high-quality care that enables them to live their best lives, we would love to hear from you. Apply today and be part of driving excellence in care and support

A well‑established manufacturing business operating advanced packaging and processing machinery is seeking a Multi‑Skilled Maintenance Engineer to join its engineering department. The company continues to expand and invest in modern automation, requiring engineers with strong technical capability, particularly across electrical systems and PLC‑controlled equipment. Role Overview The Multi‑Skilled Maintenance Engineer will play a key role in maintaining, repairing, and improving a wide range of production machinery. The position has a strong electrical bias, and the ideal candidate will be confident working with PLC systems, hydraulics, and pneumatics. The engineer will support both reactive and preventative maintenance activities while contributing to ongoing reliability and continuous improvement initiatives. Key Responsibilities: Perform planned preventative maintenance (PPM) across production machinery and supporting equipment. Respond promptly to mechanical and electrical breakdowns to support operational continuity. Fault‑find and interrogate PLC systems (e.g., Siemens, Allen Bradley, similar). Diagnose and repair faults on hydraulic and pneumatic systems. Carry out electrical maintenance including installations, panel work, component replacement, and testing. Read, interpret, and work from electrical and mechanical schematics. Maintain accurate engineering logs, maintenance records, and documentation. Take part in continuous improvement work focused on machine reliability and process optimisation. Work collaboratively with operations and production teams to deliver engineering solutions. Ensure all work complies with site health & safety standards and statutory regulations.Beneficial Skills / Qualifications: Time‑served apprenticeship or equivalent qualification in Electrical Engineering (NVQ Level 3, HND, HNC, etc.). Multi‑skilled background with strong electrical bias. Hands‑on experience maintaining manufacturing or processing machinery. Competent in PLC fault‑finding (not necessarily full programming). Good working knowledge of hydraulics and pneumatics. Ability to problem‑solve efficiently under pressure. Comfortable working both independently and as part of a team. Experience within FMCG, packaging, or high‑speed automated environments. Knowledge of robotics, servos, sensors, or industrial automation. 18th Edition Wiring Regulations. Experience using CMMS systems

Trainee AI Engineer - No Experience Needed! Ready to launch a future-proof career in AI - even if you have zero experience? We’re looking for ambitious individuals ready to break into the world of artificial intelligence and data science. Our industry-leading AI Traineeship is designed to take you from complete beginner to a highly employable Junior AI Engineer, with full training provided and a guaranteed job offer (£25K-£45K starting salary) within 20 miles of your location. Whether you're working full-time, part-time, or currently unemployed, our flexible, self-paced program allows you to train around your lifestyle and be job-ready in as little as 6-12 months. How it works - your journey to AI success Step 1: Discover AI Start your journey with our beginner-friendly mini-course bundle. Explore the fundamentals of AI through interactive videos, presentations, and quizzes - all accessible anytime, anywhere, through our easy-to-use online platform. Step 2: Full-Stack AI Mastery Dive deeper with in-demand technical skills including Python programming, data handling, machine learning, and version control with Git and GitHub. You’ll work on hands-on mini projects that mirror real-world challenges, helping you build confidence and a strong portfolio as you learn. Step 3: Get Certified Prepare for and earn your Microsoft AI-900: Azure AI Fundamentals certification, an internationally recognised qualification that proves your knowledge and boosts your credibility with employers. Step 4: Real-World Projects Showcase your new skills with two industry-based, practical projects assigned by your personal tutor. These projects are designed to give you real, portfolio-worthy experience, making you stand out to employers from day one. Your guaranteed future After completing your training, you'll be placed in a Junior AI Engineer role with a guaranteed starting salary of £25K-£45K. We work with top employers across the UK to ensure you get matched with a role close to home. We guarantee a job offer upon completion or 100% of your course fees refunded. We’re proud to have helped over 1,000 people each year transform their careers. Explore our success stories on our website and see what your future could look like. At a one off cost of £990, or a deposit of £149 followed by 10 interest free monthly instalments of £124, this represents a great opportunity to start a rewarding career in Ai and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. Ready to future-proof your career? If you’re passionate about tech and ready to break into one of the fastest-growing industries in the world, apply now. One of our friendly advisors will be in touch to guide you through the next steps. ‘Please note that this is a training course and fees apply

Company description: Water Utility Company based in Yorkshire region of England. Job description: Lead Design Engineer (Civil) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience from £48,249 to £60,314. Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year). Attractive pension scheme (up to 12% company contribution). Development opportunities in line with the Lead Design Engineer progression plan. 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary. A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme. Online GP service, cycle to work scheme, gym membership discounts and many more! Location : This role will initially be based in Bradford but were moving our office to Leeds Valley Park in Summer 2026, so youll be based there in the future (hybrid working minimum 1 day per week in the office). Work type: Permanent. 37 hours per week, Monday Friday. What we do! Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Our Engineering Design team are a key part of how we plan to meet the changing expectations of customers and regulators. This role is a fantastic opportunity for someone who is passionate about engineering excellence, thrives in a collaborative multi disciplinary environment, and wants to play a central part in shaping the future of water infrastructure. Our Engineering Design Team sits at the heart of our capital programme. We lead the technical definition, governance and design of projects across water, wastewater, bioresources, nature based solutions, networks, treatment and beyond. We are building a Design Authority and Engineering centre of excellence that will set the standard for how Yorkshire Water designs and delivers infrastructure. Where you fit in! As our Lead Design Engineer (Civil) you will: Bring at least 5 years of civil design experience, with strong technical capability in hydraulic design, wastewater treatment and clean water treatment infrastructure, applying this expertise across multidisciplinary civil engineering projects. Deliver high-quality civil engineering design for water, wastewater, bioresources and storm overflow programmes within a collaborative, multidisciplinary team. Work closely with the Strategic Planning Partner, Design Partner and Delivery Partners, providing technical oversight and ensuring high-quality design delivery across the full project lifecycle. Ensure all design work is completed efficiently and in full compliance with Yorkshire Water Engineering Specifications, design guidance, legislation and relevant British and European Standards. Lead on technical reviews of design outputs produced by planning and delivery partners, ensuring accuracy, consistency and strong technical governance throughout the project lifecycle. Contribute to design governance activities including value engineering, constructability reviews, and HAZOP/HAZCON workshops, supporting safe and efficient project outcomes. Develop efficient, cost-effective and technically robust engineering solutions, aligned with TOTEX and whole-life cost and carbon principles. Work closely with suppliers, procurement and planning teams to drive standardisation and increase the use of Design for Manufacture and Assembly (DfMA) across civil engineering projects. Promote innovation and continuous improvement while providing technical leadership, mentoring and guidance to junior engineers and graduates. Champion a strong safety culture by ensuring excellent standards of health and safety in design, effective risk management and full compliance with the Yorkshire Water Safety Policy. Play a key role in delivering proficient and efficient engineering design support across the full project lifecycle, ensuring all programmes of work are delivered to a consistently high standard. Collaborate closely with senior engineering leads and project partners to ensure seamless coordination, clear communication and consistent multidisciplinary project delivery. What skills and qualifications you will need: Degree-qualified in Civil Engineering (or related discipline), ideally Chartered or working toward Chartership (ICE or equivalent). A minimum of 5 years civil design experience within the water or wastewater sector, with strong technical capability in hydraulic modelling, treatment processes and pipeline design. Proven experience across key areas including wastewater and/or water treatment works, gravity and pressurised pipelines, earthworks, structural design and site layout development. Strong communicator with excellent written and verbal skills, able to translate complex technical information for non-technical audiences and collaborate effectively across multidisciplinary teams. Highly organised with experience delivering multiple design outputs to project deadlines, following robust quality procedures and document control processes. Committed to safety, sustainability and high-quality engineering design, with strong attention to detail and a full valid driving licence with less than 6 points. You will also benefit from having: Experience in design of nature based and blue/green solutions. Proficiency in design tools such as Civil 3D, MicroDrainage/InfoDrainage, GIS, and hydraulic modelling software. Experience in Ground Investigations. Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got experience as a Lead Design Engineer (Civil) and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Please apply online and complete the application process by uploading an up-to-date copy of your CV and cover letter outlining your relevant experience for the role. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Closing date for this role is 29th March 2026. No Agencies please. TPBN1_UKTJ

Flood Risk & SuDS Engineer Location: Bingley, Warrington, Basildon, or Remote Working Hours: Monday to Friday, 8:45am - 5:00pm Contract: Full-time, Permanent About the Role We are looking for a motivated and technically capable Flood Risk & SuDS Engineer to join our growing team at EPG. This role offers the opportunity to take a leading position in the design and delivery of Sustainable Urban Drainage Systems (SuDS) and Flood Risk Assessments (FRAs) across a diverse portfolio of projects, including residential, commercial, and infrastructure developments. You will play a key role in shaping climate‑resilient, low‑impact design solutions, working closely with clients from an early stage to understand their needs and deliver collaborative, high‑quality outcomes. EPG is committed to supporting your professional development, offering exposure to a wide range of projects and the opportunity to work closely with a highly experienced, multidisciplinary team. Key Responsibilities Lead the design, specification, and implementation of SuDS solutions for a variety of developments Prepare Flood Risk Assessments (FRAs) in line with current UK legislation and planning policy Undertake hydraulic modelling using industry‑standard software such as MicroDrainage, Causeway FLOW, or InfoDrainage Produce high‑quality technical reports, drawings, and design documentation Ensure designs comply with relevant standards and guidance, including the CIRIA SuDS Manual (C753) and Building Regulations Manage multiple projects simultaneously, supporting delivery to agreed timescales and budgets Maintain high standards of quality, health & safety, and technical compliance Liaise effectively with clients, local authorities, statutory bodies, contractors, and stakeholders Stay informed on emerging best practice, policy, and innovation in flood risk, drainage, and water management Promote climate‑resilient and sustainable design approaches across all projects About You Essential Requirements: Degree in Civil Engineering, Environmental Engineering, or a related discipline 2-4 years' experience in SuDS design, flood risk management, and drainage design Working towards, or aspiring to achieve, Chartered status (ICE, CIWEM or similar) Proficient in drainage and design software such as AutoCAD, MicroDrainage, Civil 3D, InfoDrainage, or Causeway FLOW Strong understanding of UK planning policy, SuDS legislation, and design standards Excellent written and verbal communication skills, with the ability to produce clear technical reports and present to stakeholders Highly organised, detail‑focused, and committed to quality A proactive, innovative approach to problem solving Strong IT skills, including Word and ExcelDesirable: Experience using Tuflow, ICM, or other 1D/2D hydraulic modelling software Experience with 2D/3D highways and earthworks design Experience delivering sectional agreements (S104, S38, S278, S185, S106) Experience undertaking Strategic Flood Risk Assessments (SFRAs)Why Join EPG? At EPG, you'll be part of a respected consultancy known for delivering scientifically robust, cost‑effective, and sustainable solutions. We offer a supportive environment where professional development is actively encouraged, collaboration is valued, and your contribution genuinely makes an impact on the built environment and climate resilience

Customer Care Advisor £24,784 plus overtime opportunity APRIL 13TH 2026 start date available. New Positions due to expansion and demand for customer service teams. Bradford Hybrid available or full-time office. My client is a little different to the usual Insurance businesses, rather than being part of a huge contact centre, here they have a more personable and welcoming team appeal. They encourage a positive result for all of their customers and on average process over 87% of their claims for customers. This Insurance company are part of an International Group and offer a 12-week training programme to onboard new people into the business and support all the way through the training, offering full engagement from trainers and senior advisors. 4 Weeks classroom training then 8 weeks live with a buddy to coach you through. The hours for the first 12 weeks are 09.00 – 17.00 fully office based. Hybrid can commence after this 12 week training period. Monday to Friday – no early or late nights with the occasional one in six Saturday eventually required once every 6 weeks for 4 hours – which is paid overtime. Monday to Friday with 3 alternate start times of 0830, 08.45 or 09.15 ** Eventually they will need you to accommodate one in six Saturday mornings only – 09.00 – 12.00 paid at time and a half. Working in a smaller team of customer service professionals with all levels of customer support exposure and having the support of 12 administrators. Alongside you will be supporting the technical team of engineers which is a larger team of around 40. The company are looking to welcome people into the business that are looking for an office-based customer support role. I would welcome someone that has a wealth of customer service or telephone-based experience (salary can be discussed) that can offer support and leadership in the delivering a high standard of customer service to its clients, along with supporting and encouraging the others that are learning and wanting to train as experienced agents. You could have experience working within a busy customer service department, retail or contact centre as long as you are confident and love customer service, training is offered to develop you in your new career, you will be first point of contact with customers. Your customer service skills are key for this role, you will enjoy delivering and maintaining a high level of customer service to all existing customers Key requirements for the role: o You will need to have a professional and personable manner, have the ability to engage with customers, my client will encourage you to identify the customers specific claim requirements. o Fact find and transfer the call to the right contact if you cannot progress with the customer enquiry, provide full customer support, update all customer records accurately. o Advise customers with the next stage process and update any compliant administration. o Guide clients through the claims process on the portal. o Deliver excellent customer support under pressure and have the ability to problem solve. Superb Benefits Available: 25 days base holiday (plus bank holidays) with the option to buy 5 more or carry them over Up to 10 additional holiday days on top of your allowance Discounts on products and gym membership discounts through Gym Flex Free flu vouchers in winter, Christmas voucher, and free eye tests every 2 years Cycle to work scheme and a £625 bonus for referring a friend Excellent pension match benefits and private healthcare with Bupa Discounts at local retail outlets and opportunities to win tickets to events Free parking onsite For the customer care advisor role, you must be able to demonstrate a strong ability to work under pressure, customer service skills, a confident telephone manner and a reactive and positive attitude. I have immediate interviews available and look forward to receiving your application, thank you for taking the time to apply. Lisa Farr Associates. Recruitment Specialist

________________________________________ Administration Assistant (Full or Part-time) Salary: £23,810 - £25,000 (or pro-rated equivalent for part-time) Location: Bradford (hybrid working) Hours: Mon-Fri Permanent Position Our client is seeking a highly organised and detail focused Administration Assistant to join their Admin Team within Operations. This role is essential in providing high quality administrative support to both internal and external clients, ensuring that all registrations, amendments, and cancellations are processed accurately and efficiently. You will also be responsible for maintaining compliance with all company policies, FCA requirements, and internal service standards. ________________________________________ The Key Responsibilities of the Administration Assistant: * Provide high level administrative support across the Admin Team, including processing email, electronic, and hard copy policy applications and associated correspondence. * Manage all registration tasks, ensuring all work meets company KPIs and guidelines. * Respond to emails within KPIs, ensuring all communication meets company standards. * Maintain positive working relationships and deliver excellent service to internal and external contacts. * Support wider business areas when required and attend training and meetings as needed. * Comply with all company procedures, policies, FCA and Data Protection regulations, IT/security standards, and mandatory training requirements. * Complete and record required training hours and participate fully in performance review processes, reporting any concerns affecting job performance. ________________________________________ The Key Requirements of the Administration Assistant: * Previous administration and customer service experience is highly desirable * Basic Microsoft Office skills beneficial (email, letter writing, spreadsheets) Functional / Technical Competencies: * Strong teamwork skills and ability to collaborate effectively * Excellent time management skills to handle high volumes of requests * Ability to meet KPIs consistently while maintaining accuracy and professionalism ________________________________________ The Successful Candidate Will Receive Excellent Benefits: * 25 days holidays + bank holidays + 5 additional company holiday days * Regular team incentives and days out * Hybrid working arrangements and flexible working hours for part-time employees * Free on-site parking Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Company description: Water Utility Company based in Yorkshire region of England. Job description: Lead Design Engineer (Process Clean Water) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience, £48,249 to £60,314. Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year). Attractive pension scheme (up to 12% company contribution). Development opportunities in line with the Lead Design Engineer progression plan. 25 days annual leave plus bank holidays plus an extra wellness day! Life assurance cover of 4 times pensionable salary. A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme. Online GP service, cycle to work scheme, gym membership discounts and many more! Location : This role will initially be based in Bradford but were moving our office to Leeds Valley Park in Summer 2026, so youll be based there in the future (hybrid working minimum 1 day per week in the office). Work type: Permanent. 37 hours per week, Monday Friday. We have an exciting opportunity for a Lead Design Engineer (Process Clean Water) to join the Engineering Design Team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do! Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Asset Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. Yorkshire Water is looking for a Lead Design Engineer in water treatment process engineering to join the Engineering Design Team. The Lead Design Engineer will provide expert technical advice on water treatment processes and technologies. The Lead Design Engineer will be responsible for providing process engineering support to the AMP 8 capital delivery programme, working in close collaboration with Yorkshire Waters strategic planning partner and capital delivery partners on water treatment process designs, managing and updating Yorkshire Waters Design Guidance documents, and supporting the development of standard designs. The Lead Design Engineer will report to the Senior Engineer (Process Clean Water) and will work closely with a professional team of civil, mechanical and electrical engineers. This role is a regional role and will require site visits across the Yorkshire region on an occasional basis. Where you fit in! As our Lead Design Engineer (Process Clean Water) you will: Provide process engineering support from project definition to detailed design and commissioning by attending key meetings, design meetings, value engineering meetings, Hazop meetings and site visits. Support the project team with the selection and development of best value solutions that are safe and reliable, and meet the treatment objectives, providing a robust challenge where appropriate. Assure the outline design prepared by the strategic planning partner, and the tender design and detailed design prepared by the capital delivery partner by reviewing the key process documents such as the P&IDs, mass balance, process sizing calculations, hydraulic profile, 3D model and control philosophy in advance of the formal gateways. Act as a conduit for the Engineering Design Team involving the other disciplines as and when required. Manage and update Yorkshire Waters Design Guidance documents, consulting key stakeholders and incorporating best practice from existing sites and learning from new schemes. Support the development of standard designs in conjunction with the Engineering Design Team and supply chain. Retrieve and analyse process data to support the design process. What skills & qualifications you will need: A degree level qualification (or equivalent) in chemical engineering, chemistry or water treatment related discipline. Expert knowledge of water treatment processes. A minimum of 5 years experience in a technical role in water treatment. Experience of process engineering design in the water industry. A strong attention to detail. Excellent written and verbal communication skills, including the ability to communicate complex technical concepts to a wide business audience, and the ability to influence people. Experience of working on multiple tasks to project deadlines. Full valid driving license with less than 6 points. You will also benefit from having: Chartered Engineer or Chartered Scientist status or working towards. Experience in the application of quality procedures and document control in engineering design. Experience in identifying and developing practical and innovative solutions. Although we operate 24 hours a day, 365 days a year, its important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isnt always easy! Do we sound like your cup of tea? If youve got the experience to be a Lead Design Engineer (Process Clean Water) and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Please apply online and complete the application process by uploading an up-to-date copy of your CV and cover letter outlining your relevant experience for the role. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Closing date for this role is 29th March 2026. No agencies please. TPBN1_UKTJ