Process control engineer jobs in DerbyCreate job alerts

FPGA Engineer (Graduate - Senior) A brilliant opportunity to join an innovative team building high-integrity, security-critical FPGA solutions. Whether you’re a recent graduate building foundations or a seasoned engineer leading architecture and verification, you’ll work across cutting-edge designs used in complex, mission-critical products (with exposure to applied cryptography and wider microelectronics). Location: Derby (UK travel between sites may be required) Salary: £30,000 – £75,000 DOE + benefits Requirements for FPGA Engineer: • Degree in a relevant STEM field (e.g. Electronics, Electrical, Computer or Communications Engineering)., • Strong FPGA design fundamentals and VHDL skills; ability to write, test and debug via simulation and on-device., • Familiarity with at least one major toolchain (e.g. Vivado, Quartus or Libero) and version control (GIT/SVN/CVS)., • For experienced candidates: proven end-to-end FPGA delivery, interface definition, TCL scripting, and robust verification approaches (e.g. UVM/OSVVM/ABV)., • Bonus points for: experience with Xilinx / Intel (Altera) / Microchip devices; ModelSim/QuestaSim; SystemVerilog/Verilog; Layer-2/3 networking, USB 3.2 or NVMe; Red Hat Linux; interest in cryptographic systems., • Excellent problem-solving, communication, and time-management; able to work autonomously and collaboratively. * Due to the nature of the projects and this requiring very high level security clearance, you must be a British Citizen, and have lived in the UK consistently for the past decade - you should be happy to gain security clearance before starting. Responsibilities for FPGA Engineer: • Design and develop FPGA modules and subsystems across a range of devices and SoC platforms., • Create clean, maintainable RTL (VHDL / Verilog / SystemVerilog); build testbenches and validate via simulation and hardware., • Integrate FPGA blocks into wider system architectures; collaborate with software, hardware and verification colleagues., • Keep pace with new devices, tooling and methods; champion quality, reliability and best practice., • For senior hires: lead work-packages, own interfaces and delivery plans, mentor others, and drive verification strategy. What the role offers: • Impactful work on advanced, security-critical products with a supportive, expert team., • Structured development and progression (mentoring, on-the-job learning, targeted training)., • Competitive package including pension and life assurance, plus additional benefits. Security & Eligibility: • Due to project sensitivities, you must be a British Citizen and able to obtain and maintain DV clearance. Applications: If this FPGA opportunity sounds like a fit, please send your CV via the relevant link. We’re committed to an inclusive, accessible process. If you require reasonable adjustments for your application or interview, please email applications@redtech-recruit.com (if removed by the job board, our website has full contact details). Keywords: FPGA Engineer / Digital Design Engineer / Hardware Design Engineer / RTL Engineer / Microelectronics Engineer / FPGA Developer / Hardware Systems Engineer / Embedded Hardware Engineer / SoC Design Engineer / FPGA Verification Engineer / Graduate Hardware Engineer / Electronics Engineer / VHDL / Verilog / SystemVerilog / Vivado / Quartus / Libero / ModelSim / QuestaSim / TCL / Xilinx / Intel (Altera) / Microchip (Microsemi) / UVM / OSVVM / Assertion-Based Verification / USB 3.2 / NVMe / Layer-2/Layer-3 Networking / Electronics / Electrical Engineering / Computer Engineering / Communications Engineering / Applied Cryptography

Job Title: Quality Engineer\n\nLocation: Derby\n\nContract: Permanent\n\nRate of Pay: £30,000 - £40,000 doe\n\nOverview\n\nEMBS Engineering Ltd is working in partnership with a well-established precision engineering manufacturer based in Derby, operating within the aerospace sector. The business has a strong track record of delivering safety-critical, highly complex components to globally recognised customers and is now looking for a Quality Engineer to join the team on a permanent basis.\n\nThis is a varied, hands-on quality role that spans inspection, supplier quality, root cause analysis, and continuous improvement. You will work closely with Engineering, Purchasing, and Operations to uphold and develop the quality management system and support the business in its journey towards AS9100 certification.\n\nWhat's in it for you?\n\n \n\n Stability and longevity with a well-established aerospace precision manufacturer\n\n \n\n Competitive salary, dependent on experience\n\n \n\n Days-based working pattern\n\n \n\n Opportunity to grow professionally within a business that values skills development\n\n \n\n Active involvement in quality system development, including AS9100 attainment\n\nResponsibilities\n\n \n\n Carry out first-off and last-off inspections using mechanical measuring equipment.\n\n \n\n Act as a release signatory for procured components and outgoing shipments.\n\n \n\n Lead First Article Inspections (FAI) in accordance with AS9102.\n\n \n\n Manage root cause analysis activities using 8D and 5 Whys methodologies.\n\n \n\n Maintain calibration of inspection equipment and ensure accurate record-keeping.\n\n \n\n Contribute to control plans, PFMEAs, and New Product Introduction (NPI) activities.\n\n \n\n Support supplier evaluations, performance monitoring, and customer non-conformance management.\n\n \n\n Participate in internal and external audits to support AS9100 certification and QMS development.\n\n \n\n Promote a right-first-time culture and participate in Lean and 5S initiatives.\n\nSkills and Experience\n\nSuccessful applicants must be able to demonstrate:\n\n \n\n HNC or equivalent in Engineering, or substantial experience in an aerospace quality environment\n\n \n\n Minimum five years of experience in mechanical inspection and/or quality engineering\n\n \n\n Strong practical experience with inspection and measuring equipment\n\n \n\n Proficiency in reading and interpreting engineering drawings\n\n \n\n Knowledge of machined parts, finishing processes, and workmanship standards\n\n \n\n Solid understanding of AS9100, AS9102, and inspection sampling plans\n\n \n\n Experience with root cause analysis and problem-solving methodologies including 8D and RCCA\n\n \n\n Familiarity with quality tools such as PFMEA, control plans, and statistical analysis\n\n \n\n Experience using microscopes for inspection and defect detection\n\n \n\n Strong communication skills, both written and verbal, with the ability to present findings clearly to Engineering and Operations teams\n\n \n\n A proactive, self-motivated approach with excellent time management and organisational ability\n\n \n\n Full UK driving licence (travel within the UK may be required)\n\n * \n\n Must be a UK resident; visa sponsorship is not available\n\nAbout Us\n\nEMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious advanced precision engineering companies across the Aerospace, Automotive, Motorsport, Nuclear, Oil and Gas, Green and Environmental, and FMCG industries. We offer expert guidance and support throughout the recruitment process to help you secure a career-defining role.\n\nIf you are interested in this Quality Engineer opportunity and believe you meet the criteria outlined above, apply today to join a growing team in Derby

Tendering / Proposals Engineer\n£50,000 - £60,000 + Pension, Profit Share, Paid-Overtime, On-site Gym\n£500 per year cash benefit for leisure activities\nPaid day off for your birthday\nDerbyshire. Ref: 25428\nAre you ready to play a key role in delivering major automation and control systems projects?\nThis is a great opportunity for an experienced Tendering Engineer with a background in PLC/SCADA systems to join a growing engineering environment supporting projects across multiple industry sectors. Perfect for someone who enjoys combining technical knowledge with commercial awareness, this role offers involvement in the full tendering process — from costing and proposal writing through to client engagement and sales support.\nTendering / Proposals Engineer - The Role:\n Produce technical and commercial tenders for automation and control system projects\n Develop project costings, tender programmes and final proposal documents\n Support directors with complex tender submissions and structured bid processes\n Monitor tender portals and identify new business opportunities\n Maintain CRM systems and sales reporting documentation\n Manage proposal templates, costing tools and sales materials\n Support client visits and incoming sales enquiries\n Contribute to social value, sustainability and governance responses within tender submissions\nTendering / Proposals Engineer - What We’re Looking For:\n HNC or above in Electrical, Electronic, Software or related Engineering discipline\n Previous experience within a tendering or proposals environment\n Knowledge of PLC/SCADA control systems desirable\n Understanding of M&E installations beneficial\n Strong commercial awareness and attention to detail\n Experience using Microsoft Word, Excel and Microsoft Project\n Excellent communication, organisation and teamwork skills\n Able to work independently and manage multiple priorities effectively\nWhy Join?\n Opportunity to work on varied automation and control systems projects\n Blend of technical, commercial and client-facing responsibilities\n Involvement in high-value project tenders and business growth activities\n Collaborative environment with strong long-term development opportunities\n Varied role with real ownership and responsibility\nPerks of the Job:\n Flexible working hours and holidays\n Your birthday off with pay\n Sick pay and pension contribution\n Profit share bonus\n £500/year for activities with friends and family\n Employee well-being program with 24/7 helpline\n Free use of the on-site gym\nInterested?\nIf you’re looking for a role where you can use your automation knowledge within a commercially focused engineering environment, we’d love to hear from you.\nLocated in Derbyshire, this role would be commutable from Derby, Nottingham, Castle Donnington, Ripley and surrounding areas\nFor more information, please contact John Anderson

Mechanical Engineer needed asap in Derby must be qualified to level 3 standard and experienced in manufacturing/plant machinery. Initial 6 month FTC, possibility of renwal.\nDays: 6-2 or 8-4 pm Monday to Friday\nNo weekends\nOvertime structure if applicable.\nResponsibilities & Key work tasks\n Carry out a full range of engineering and maintenance duties for the entire site, diagnosing and resolving faults\n Use of CMMS system to record maintenance and breakdown activities\n Proactive in maintaining, developing and implementing site improvement processes and carrying out both preventative and breakdown maintenance of all fixed plant.\n Executing work to specific Health and Safety, Company and Industry Standards and Regulations.\n Support local contractor management processes ensuring they are following Health and Safety Standards\n Ensure the plant is run in a safe and stable manner ensuring continuity of the process and equipment, whilst using best practices for energy efficiencies.\n Operate and adjust the process to give the specified product quality level and quantity in accordance with the Quality System Requirements.\n Carry out all in-process testing and at the frequency specified and accurately report, record, and communicate all information relevant to the activities carried out during your shift.\n Fully deputise for the Shift Team Leader as per business requirements.\n To ensure that the Plant and control room cleanliness is kept to the required standard.\n * Any other duties relevant to the task\nAll suitable cvs will be contacted within 48 business hours

Job Title: Senior Quality Engineer\nLocation: Derby\nContract: Permanent\nRate of Pay: Up to £55,000 per annum (DOE)\n\nOverview\n\nEMBS Engineering Ltd is working in partnership with a well-established precision engineering manufacturer based in Derby. Operating within the aerospace sector, this business has built a strong reputation for delivering safety-critical, highly complex components to globally recognised customers. Following a period of continued success, they are now looking to bring an experienced Senior Quality Engineer into the team on a permanent basis.\n\nThis is a broad, varied role sitting at the heart of the quality function. You will be working to aerospace standards including AS9100 and NADCAP, engaging with customers directly, leading audits, and driving continuous improvement across the business. If you are a quality professional who thrives in a fast-paced manufacturing environment and wants genuine ownership of your work, this is a strong opportunity.\n\nWhat's in it for you?\n\n Stability and longevity with a well-established aerospace precision manufacturer\n\n Competitive salary, dependent on experience\n\n Days-based working pattern\n\n Opportunity to develop professionally within a business that actively invests in its people\n\n A genuine remit with ownership across quality systems, audits, and continuous improvement\n\nResponsibilities\nDue to continued growth, our client is looking for an experienced Quality Engineer to take ownership across the quality function. Your responsibilities will include:\n\n Maintain and improve the quality assurance system in line with AS9100, NADCAP, and customer-specific requirements\n\n Develop and sustain a structured quality walk-the-floor routine, using findings to identify issues and feed into daily operational meetings\n\n Act as the primary point of contact for customer quality queries and concerns, ensuring timely and effective resolution\n\n Review, interpret, and implement new or updated customer requirements as they arise\n\n Lead and participate in customer and NADCAP audits, maintaining a comprehensive internal audit programme that keeps the business audit-ready at all times\n\n Maintain control plans, process flow charts, PFMEA, and PPAP documentation\n\n Support the delivery of NPI and maintain a working knowledge of the FAIR process in line with AS9102\n\n Drive down the cost of non-conformance by engaging with operational teams to contain, investigate, and resolve quality issues\n\n Monitor the resolution of internal and external problems, ensuring corrective standards are embedded into ongoing processes\n\n Report against KPIs regularly, using data to identify trends and support decision-making\n\n Support the training and development of team members on quality standards and processes\n\n Contribute to continuous improvement and lean initiatives, promoting a zero-defect culture across the business\n\nSkills and Experience\nSuccessful applicants must be able to demonstrate:\n\n HNC or equivalent in Engineering, or substantial hands-on experience in an aerospace quality environment\n\n A minimum of three to five years in a quality engineering role, ideally within aerospace or a similarly regulated sector\n\n Proven experience working to aerospace standards including AS9100, AS9102, and NADCAP\n\n Strong ability to read and interpret engineering drawings, with practical experience using inspection and measuring equipment\n\n Knowledge of machined parts, finishing processes, and workmanship standards\n\n Experience leading or participating in customer and third-party audits\n\n Competence in root cause analysis and problem-solving methodologies including 8D and RCCA\n\n Working knowledge of quality tools such as PFMEA, control plans, PPAP, and statistical analysis\n\n Must be a UK resident; visa sponsorship is not available for this role\n\nAbout Us\n\nEMBS Engineering is a dedicated talent specialist that partners with some of the UK's most prestigious advanced precision engineering companies across the Aerospace, Automotive, Motorsport, Nuclear, Oil and Gas, Green and Environmental, and FMCG industries. We offer expert guidance and support throughout the recruitment process to help you secure a career-defining role.\n\nIf you are interested in this Quality Engineer opportunity and believe you meet the criteria outlined above, apply today to join a growing team based in Derby

Standardisation Engineer\n\nLocation: 1 day a week in the office - Derby or Manchester\n\nPermanent\n\n£40,000 - £ 60,000 depending on experience.\n\nARM are supporting on an exciting opportunity that has arisen for a Standardisation Engineer to join a pioneering clean energy programme focused on delivering innovative low-carbon power solutions. This role sits within the Standardisation & Standard Parts team, which is responsible for reducing product variation, improving engineering efficiency, and supporting deployment across a complex, highly regulated engineering environment.\n\nYou will play a key role in shaping standardisation strategy across multidisciplinary engineering teams, helping ensure products and components are repeatable, cost-effective, and aligned with programme-wide objectives.\n\nKey Responsibilities\n\nDrive standardisation strategies across components, systems, and plant-wide engineering activities.\nPromote product and process consistency through standard rules, tools, and procedures.\nReview engineering artefacts to identify opportunities to reduce variation and improve repeatability.\nSupport optimisation of engineering workflows, improving efficiency and reducing resource and time requirements.\nContribute to the development and maintenance of standard parts catalogues and associated engineering tools.\nProvide technical guidance and governance relating to standardisation principles and decisions.\nCollaborate with internal stakeholders, suppliers, and multidisciplinary engineering teams to align design approaches and resolve variation issues.\nSupport integration and consistency across multiple engineering disciplines and delivery partners.\n\nWhat You'll Bring\n\nExperience in engineering standardisation, configuration control, product optimisation, or related disciplines.\nBackground in complex engineering environments such as nuclear, energy, aerospace, automotive, defence, rail, or manufacturing.\nStrong understanding of engineering processes, component interfaces, and product lifecycle considerations.\nHeavy mechanical product knowledge. \nAbility to influence stakeholders and drive alignment across cross-functional teams.\nExcellent analytical and problem-solving skills with a focus on continuous improvement.\nStrong communication and collaboration abilities.\nMust be a driven individual who is able to take full accountability for delivering set work packages.\n\nExperience Required\n\nMEng Degree or HNC with proven experience in Mechanical Engineering.\nKnowledge of engineering data management systems and standard parts catalogues.\nFamiliarity with regulated industries and quality assurance processes.\nExperience working with suppliers and external engineering partners.\nSix Sigma is desirable but not essential. \nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission

Air Conditioning & Chiller Engineer – Overview\n\nWe are currently working with an established Climate Control contractor in the Midlands who are seeking a fully qualified HVACR Engineer with experience on Air Conditioning and Chiller systems to join the team. The company has been operating for over 50 years. Their turnover is circa £20million as a business with a head count of 71 across all departments. Their Climate Control Division focuses on the service, maintenance and repair of HVAC, Air Conditioning, Chiller and Refrigeration systems.\n\nWithin this role, you will travel to sites throughout the Midlands carrying out predominantly service, maintenance and repair works on VRF, VRV, Split Systems and Chillers. They cover commercial sites such as Hotels, Schools, Offices, Factories, Warehouses and other clients. They have a strong team of Climate Control Engineers on the team already but they are keen to find someone with a high level of knowledge on Chillers as they have them across several of their food process sites. Occasionally, there will be some installation works to do on AC Systems however this is usually when an old system needs replacing.\n\nThe company are very strong on work/life balance. They do not operate any call out rota and you work a 37.5 hour working week Monday – Friday with an early finish on Fridays. All sites are within the Midlands area to minimise travelling.\n\nA full UK Licence is required.\n\nAir Conditioning & Chiller Engineer – Requirements\n\n Proven experience in air conditioning, chillers and refrigeration systems\n\n Strong fault-finding and diagnostic ability across a range of HVAC equipment\n\n F Gas 2079 Cat 1\n\n Full Clean UK Driving Licence (company van provided)\n\nAir Conditioning & Chiller Engineer – Salary & Remuneration\n\n Salary up to £45,000 + Travel Pay & Bonuses\n\n Door to Door Travel Pay\n\n Company Van & Fuel Card\n\n Profit Share Scheme\n\n Overtime\n\n No Call Out Rota\n\n 25 Days Holiday + Bank Holidays + Celebration Day\n\n Tools, Uniform, PPE\n\n Tablet/PDA, Phone\n\n Sick Pay\n\n Early Finish Friday\n\n Company Pension

We are working with one of the largest international independent manufacturers of metallic aerospace detailed parts. Capabilities include Machining, Assembly, Inspection & Control, Integrated Logistics, Processing & Finishing, Sheet Metal & Fabrication, Speed Shop, Engineering. They are looking for a Group Technical Quality Engineer to add to the team.\n \nGroup Technical Quality Engineer\n \nPermanent\n£50,000 per annum\nMonday - Thursday 07:30 – 16:00, Friday 07:30 – 12:30\nHybrid/Remote/Site Based\n \nGroup Technical Quality Engineer\nJob Description\n\nAct as internal focal point of contact, and support the central quality teams (group) as well as sites, in an expert role for escalated technical questions, queries and issues (within the assigned scope)\nSupport all sites with specialist knowledge on deployment of APQP deliverables, and support identification and deployment of APQP training to all group sites.\nWork closely with manufacturing engineering to continuously improve planning and inspection processes to share, embed and flow down best practices across the group\nSupport activities within the group (and across the sites) to maintain NADCAP and (customer) process approvals, including supporting site teams with NADCAP preparation audits\nConduct internal process audits to support identification of improvement areas\nSupport with the effective implementation of corrective and continuous improvement actions\nSupport all ToW and NPI projects in the area of expertise\nSupport the inspection team with technical queries and standardised approach. \nGroup Technical Quality Engineer\nEssential Experience/Skills/Qualifications\n\nQuality or Manufacturing Engineering Professional with extensive experience in a similar role\nExperience in deployment of APQP deliverables\nWorking knowledge of international standards for quality management systems (AS9100, ISO9001)\nHighly proficient in reading, understanding and applying technical documentation such as drawings, technical specifications, standards etc.\nExperience in manufacturing processes for sheet metal and machined components, including surface treatment processes\nProficient in developing and improving planning (routing) and supporting documentation.\nExperience in a highly regulated industry, preferably Aerospace\nStrong knowledge of problem analysis methodologies & working experience with ERP systems. \nGroup Technical Quality Engineer\nCompany Benefits\n\nHybrid Working\nCompany pension scheme\n25 days annual leave + 8 statutory holidays, Christmas shutdown\nBUPA Healthcare\nDeath in Service benefit \nIf you feel you’re a good fit for this position, please click ‘apply

Project Engineer\n Derby\n £50,000 - £55,000 + Excellent Benefits!\n\nTop Benefits:\n\nUp to 10% employer pension contribution\nPrivate medical insurance + occupational health support\nBonus scheme & life assurance (4x salary)\nGenerous holiday allowance that increases with service (plus bank holidays)\nElectric vehicle & cycle-to-work salary sacrifice schemes \n\nThe Company\n\nJoin a globally recognised manufacturing organisation at the forefront of advanced materials innovation. Supplying into industries such as automotive, construction, and consumer goods, the business is known for its commitment to sustainability, engineering excellence, and continuous improvement. The Derby site is a key hub for capital investment and operational development.\n\nThe Role\n\nAn exciting opportunity has arisen for an experienced Project Engineer to take ownership of capital projects across mechanical systems, site utilities, and infrastructure. Reporting to the CAPEX Leader, you will manage projects end-to-end - from concept and design through to installation and commissioning.\n\nKey Responsibilities\n\nSupport long-term CAPEX planning, including project selection and prioritisation\nDevelop engineering solutions in collaboration with key stakeholders\nProduce cost estimates (±30% early stage, ±10% detailed)\nLead Management of Change (MOC) processes\nManage contractor selection and vendor engagement\nOversee full project lifecycle: design, construction, commissioning\nEnsure high standards of safety, quality, and delivery performance\nMaintain full technical documentation (P&IDs, SOPs, SLDs, etc.)\nTrack budgets, control costs, and report on financial performanceAbout You\n\n5+ years' experience in a Project Engineering role (industrial/manufacturing environment)\nStrong knowledge of steam systems and process pipework\nMechanical qualification (HNC/HND/City & Guilds or equivalent)\nExperience with ATEX environments (desirable)\nIOSH or NEBOSH qualified (or working towards)\nProven contractor and stakeholder management experience\nCAD and SAP experience preferred\nStrong IT skills (Microsoft Office) \n\nAdditional Benefits\n\nEnhanced maternity, paternity & neonatal pay\nPaid emergency dependants, carers, and bereavement leave\nEmployee Assistance Programme (mental health, legal & financial support)\nCareer development, training, and tuition support\nInclusive workplace with active employee networks\nHealth surveillance, company sick pay & annual flu vaccinations \n\nRequirements\n\nAble to commute to Derby (DE21)\nRight to work in the UK (no sponsorship available)

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career.\nWe understand the impact our work has on our society and the environment. It’s the difference we make that improves people’s lives and helps the economy to grow. We work alongside our customers to deliver resilient, bespoke infrastructure solutions that keep the taps running, the energy flowing and people connected. The work we do together matters.\nAbout the role:\nDue to continued contract growth, we are seeking a Project Engineer to join our delivery team. You will support the design, build, and commissioning phases of projects, working closely with Project and Site Managers to ensure programmes and budgets are met.\nSalary: £44,000 - £56,000 Depending on experience\nCompany Car or Car allowance\nKey Responsibilities:\n Support the Project Manager in managing engineering activities and monitoring progress against the project plan.\n Ensure correct material specifications, timely procurement, and maintain material schedules.\n Provide on-site support to resolve engineering issues and support quality and safety support.\n Assist with procurement, H&S documentation and commissioning procedures.\n Ensure compliance with statutory legislation, company standards, and HSQE requirements.\n Prepare project documentation including procurement schedules, RAMS, SWPs, with input into programmes and Forecasting\n Coordinate with clients and subcontractors on H&S audits and inspections.\n Support site activities to maintain programme and QA/ITP compliance.\n Apply basic NEC contract knowledge (time, cost, EWNs) and contribute to quality planning.\nSkills and Experience:\n Familiarity of MEICA projects from a design or delivery background.\n Process knowledge in Water Treatment and/or Waste Treatment, and process control knowledge.\n Familiarity of control systems, manual and actuated valves, instrumentation and quality instrumentation.\n Understanding of hydraulic systems, pumping systems and pressure systems.\n Proficiency in MS Project for creating detailed programmes and cost build-ups.\n * Good experience in using MS Word, Excel and Project.\nWhat’s it in for you:\nWe offer a rewarding salary that is tailored to your skills and experience. But that’s not all! We celebrate hard work and give recognition to our colleagues. In addition to this, we understand that one size doesn’t fit all, so everyone has access to a variety of flexible benefits that work for you.\n 24 days holiday plus bank holidays\n Company pension scheme\n Life assurance\n A selection of lifestyle benefit options\n Financial wellbeing programme\n Employee assistance program for health and wellbeing and onsite mental health first aiders to support our colleagues.\n We love to give back so we offer you volunteering days in your community and charity matched giving where we will boost your fundraising.\n Rewards initiative for achieving recognised professional qualifications.\nAbout us:\nWe design, build and maintain the UK’s utilities infrastructure to help transform local communities for the better. We provide cutting-edge and sustainable engineering solutions and play a critical role in helping to keep the water running, the lights on and people connected.\nWe are an expert, responsible and agile partner, providing vital services to water and power sectors. We work closely with our clients to help protect and improve their assets, enhance customer experience and protect the natural environment. Everything we do is designed to drive continual improvement and move life forward.\nWe are proud to work in partnership with leading utility providers, including Severn Trent, United Utilities, Yorkshire Water, Northern PowerGrid, Northumbrian Water Group, and Scottish Power Energy Networks.\nWe are an equal opportunities employer:\nWe welcome applications from candidates of all races, genders, disabilities, religions, ages and sexual orientations. We know that having a diverse workforce encourages new perspectives, inspires creativity and creates an engaging workplace and we are committed to creating an inclusive environment where all colleagues can thrive. When it comes to inclusion, we’re making sure we keep up the progress with our Communities of Practice, who help us do just that.\nWhat next:\nWe encourage you to apply for this role as soon as you can. We recognise talent waits for no one, so we progress candidates individually through all stages of recruitment process.\nIf you have any questions, please reach out for an informal discussion

Company Description\n\nToday, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. \n\nAssystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.\n\nJob Description\n\nJoin us a Manufacturing Engineer\n📍 Location: Derby\n📝 Contract or Staff Positions available\n\nYour Future Team:\n\nYou will be joining an Embedded Manufacturing team based at our client site in Derby. The Manufacturing Engineer will be responsible for providing technical support to the production team, designing and developing production processes, and implementing process improvements to enhance the efficiency and effectiveness of the manufacturing operation.\n\nYour Missions:\n\n🔧 Improve manufacturing by analysing current processes and designing new ones for efficiency and cost reduction.\n👨‍🔧 Provide technical support during production issues.\n🛠️ Develop quality control procedures to meet industry and customer standards.\n🛠️ Design new tools and equipment for better manufacturing.\n💡 Conduct feasibility studies and cost analyses for new processes.\n📊 Monitor production data, identify improvements, and boost productivity.\n⚖️ Ensure compliance with industry and nuclear safety regulations.Why join the community of Switchers?:\n\n🔹 The Group is currently ranked Third in the world for nuclear engineering.\n\n🔹A dynamic career management policy to enable our employees to progress through our five business lines: operations, project, technical, sales and support functions\n\n🔹Provide opportunities to work on exciting, global projects\n\n🔹Access to an employee assistance programme with free mindfulness, health, wellbeing resources and a confidential support line available 24/7 via phone or text\n\n🔹Discount vouchers for days out and restaurants, eye test and glasses vouchers, cycle to work scheme, free flu jabs\n\nAt Assystem, we celebrate diversity and creativity. We believe in harnessing unique perspectives to shape innovative solutions. Your skills and daring spirit are what truly matter. Join us and help shape the future! 🌟\n\nQualifications\n\n🎓 Degree in Manufacturing/Mechanical Engineering or related field.\n📅 3+ years in manufacturing engineering within the nuclear industry.\n☢️ Strong knowledge of nuclear safety regulations.\n🧠 Excellent analytical and problem-solving skills.\n🛠️ Ability to design new processes and tools.\n📈 Experience with Lean and Six Sigma.\n📋 Strong project management skills.\n\nAdditional Information\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nPlease be aware that many roles at Assystem are subject to both security and export control restrictions.\n\nThese restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.\nAll applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Company Description\n\nToday, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. \n\nAssystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.\n\nJob Description\n\nTooling Designer / Mechanical Designer\n📍Derby\n Permanent & Contract roles available\n\n Your future Team:\n\nYour will be joining an Embedded Team as a Tooling Design Engineer / Senior Mechanical Designer. You will be responsible for performing full lifecycle engineering activities across a range of engineering projects which will form part of the submarine’s new build and development programmes.\n\nKey Responsibilities:\n\n🛠️ Designing tooling, jigs fixtures and components that meet customer requirements\n\n 📐 Produce outline designs\n\n🔧 Identify, formulate, and produce solutions to emerging problems\n\n 🛡️ Evaluate final product’s overall performance, reliability, and safety\n\n ✏️ Alter and modify design to meet requirements customer requirements\n\n💷 Estimate budget and scope of project\n\n⚠️ Management of Risk and Opportunity\n\n📄 Prepare product reports and documentation\n\n📚 Engage in lifelong learning and develop new theories or methods\n\nWhy join the community of Switchers?:\n\n🔺 The Group is currently ranked Third in the world for nuclear engineering\n\n🔺 Access to an employee assistance programme with free mindfulness, health, wellbeing resources and a confidential support line available 24/7 via phone or text\n\n🔺 Discount vouchers for days out and restaurants, eye test and glasses vouchers, cycle to work scheme, free flu jabs\n\n🌟 At Assystem, we celebrate diversity and creativity. We believe in harnessing unique perspectives to shape innovative solutions. Your skills and daring spirit are what truly matter. Join us and help shape the future! 🌟\n\nQualifications\n\n📘 Experience in similar roles with specific emphasis (but not limited to) Valves, Pressure Vessel, Structural, Tooling or Lifting Equipment Design.\n\n⚙️ Proven working experience in mechanical engineering\n\n📏 Understanding of relevant design codes and safety legislation\n\n 🧭 Ability to define budgets/work programmes for complete design project lifecycles e.g., requirements capture, concept design and detailed design.\n\n🧪 knowledge of materials\n\n🖥️ Familiarity with 3D CAD systems (Siemens NX or similar)\n\n📦 Familiarity with PLM systems (Teamcentre or similar)\n\nAdditional Information\n\nPlease be aware that many roles at Assystem are subject to both security and export control restrictions.\n\nThese restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.\nAll applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.NOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

My Client is recruiting for a Senior Electrical Design Engineer in the Water Sector\n\nWe are seeking to strengthen our Engineering Design Team with the appointment of a Senior Electrical Design Engineer, based in Derby with hybrid working available.\n In this role, you will report to your Line Manager and the Regional Discipline Lead - (Electrical and ICA). You will be responsible for delivering high‑quality Electrical, Instrumentation, Control and Automation (EICA) design services that support the safe, efficient and compliant delivery of projects across the water and wastewater sectors.\n You will play a key role in mitigating technical, commercial and delivery risks, ensuring that design solutions are robust, buildable, cost‑effective and aligned with both client specifications and contractual requirements. You will lead and coordinate design activities, producing detailed design documentation and drawings in accordance with relevant health and safety legislation, CDM regulations, water‑industry standards, and internal engineering governance arrangements.\n Key responsibilities will include:\n\nProduce Outline and Detailed Electrical, Instrumentation, Control and Automation designs that meet client needs and enable safe, efficient construction and commissioning.\nProduce and check specifications, schedules, drawings and calculations to a high standard.\nEnsure designs are completed in accordance with CDM Regulations and industry best practice.\nPromote the use of standard designs and consistent design principles wherever possible.\nDeliver design outputs on time and within budget, keeping colleagues informed throughout.\nWork collaboratively with other disciplines to ensure coordinated, integrated design solutions.\nPrepare clear and helpful monthly project status reports.\nBuild strong working relationships with construction teams and supply chain partners to support buildability and programme efficiency.\nProvide accurate estimates and technical insight to support proposal development.\nEnsure that standard practices are utilised wherever possible.\nContribute positively to departmental processes and support continuous improvement activities.\nMaintain accurate design records and documentation throughout the project lifecycle.\nSupport a culture focused on customer satisfaction and constructive communication.\nMaintain your own professional development and support the growth of junior team members.\nPromote safe working practices and ensure all designs reflect health, safety and environmental considerations.\nWork in a way that minimises waste and supports environmental sustainability.\nAssist in supervising and developing staff.\nAssist in ensuring a safe working environment for all staff.\n Essential:\n\nRelevant engineering degree preferred, or HND with substantial design and build experience (substantial suitable design experience).\nMembership of a relevant professional institution chartered or working towards chartership.\nSignificant experience in Electrical and ICA design and delivery, ideally within the water or wastewater sectors.\nProven Ability to develop practical, buildable and efficient design solutions that meet client, project and industry standards.\nExperience producing and checking a full suite of design deliverables, including specifications, schedules, drawings, calculations and operating philosophies.\nEnsure designs are completed in accordance with CDM regulations, and are safe to construct, commission, operate and maintain.\nCompetence in rationalising designs and developing economical, well‑integrated plant layouts.\nExperience reviewing, coordinating and providing technical assurance on subcontractor designs.\nAbility to manage complex technical information, assess design risks, and communicate implications clearly.\nHave experience of managing members of staff, in designing relevant discipline aspects of a project, preferably within Water and Wastewater project delivery.\nStrong understanding of CDM regulations and the ability to ensure designs are safe to construct, commission, operate and maintain.\nDemonstrated commitment to producing designs that follow client specifications, industry guidance and internal governance requirements\nAbility to embed standard design practices and utilise common design solutions wherever appropriate.\nExperience working collaboratively as part of a multidisciplinary engineering team.\nAbility to build strong working relationships with construction teams and supply chain partners to support buildability, quality and programme efficiency.\nProven ability to deliver coordinated design outputs across multiple engineering disciplines.\nAbility to rationalise designs and produce economic plant layouts.\nCommitment to ongoing professional development; working toward professional registration (IEng/CEng) is advantageous.\nClear, confident and convincing communication skills, with the ability to present technical proposals to a range of stakeholders.\nStrong IT skills, particularly in Microsoft Office, and confidence in using digital design environments; experience with CDE platforms is beneficial.\nFlexible, analytical mindset with the ability to process and interpret large volumes of technical information.\nBroader understanding of related engineering disciplines (mechanical, process, ICA, project management).\nFull UK driving licence and willingness to travel to project sites and office locations as required.Desirable:\n\nRelevant Engineering Master's degree.\nChartered Engineer (CEng) Status.\nUnderstand the principles of water and sewage treatment.\nUnderstanding of water and wastewater treatment principles.\nFive or more years' water‑industry experience.\nExperience working within a Common Data Environment (CDE) and digital document control

An excellent opportunity for a Field Service Engineer or ex Armed Forces Engineer with a background working with high value electronic or electro-mechanical capital equipment, to join a market leading manufacturer of medical and laboratory instrumentation . Applications are encouraged from enginee

Quality Inspector – Engineering | Competitive Shift Rates.

Separating plastics before materials are processed by Machine Operators. Keen interest in the recycling process.

Were recruiting for an experienced Maintenance Engineer to join a well-established engineering business, based near Swadlincote on their PM shift. This is a brilliant opportunity for a Multi-Skilled Maintenance Engineer who wants stability, routine, and a better w. My client is a genuinely well-run

Field Service Engineer Ground Source Heat Pump Service Engineer (Specialist Systems / Field Services Engineer) ---------------------------------------- Term: Permanent, Full-Time Salary: £40,000 £55,000 (DOE) Location: Mansfield-based role (UK-wide travel) Working Pattern: Fully Remote / Field-Bas

FM33436 CHP Field Service Engineer £45,000 -£50,000 + Benefits Yorkshire Alecto Recruitment is working with a leading company in the power generation and renewable energy sector, who are seeking a CHP Field Engineer to support the operation, maintenance, and optimisation of generator assets across

Reactive Maintenance Engineer Location: Lincolnshire (Grantham area) Salary: Competitive + benefits Shift Pattern: 4 on / 4 off (12-hour shifts, days) The Role Were working with a well-established industrial recycling and processing business operating a high-volume, 24/7 facility. Theyre looking for

The Opportunity: Field Service Engineer Contract: Permanent Location: Derby The Briggs Equipment Group is a leading provider of asset management and maintenance solutions across the UK and Ireland.

Job Title: Field Service Engineer (EPOS) Location: Suffolk Employment Type: Full-Time (40 hrs/week, 5 days over 7 including alternate weekends) Salary: £26,500 + Company Vehicle + Benefits Looking to Build a Career in IT Field Service A well-established provider of IT services to major UK retail an

ROLE: Multi Skilled Maintenance Engineer HOURS: 4on4off, Continental Days and Nights SALARY: £48,179.

CNC Field Service Engineer Location: Midlands / North West / North (Regional Coverage) Salary: £38,000 £42,000 Door-to-Door Overtime Company Car We are currently recruiting for a CNC Field Service Engineer to join a well-established and highly respected machine tool company supporting customers ac

Position: Multi-Skilled Maintenance Engineer Location: Somerset (Commutable from, Sherborne, Yeovil, Glastonbury, Shepton Mallet, Bruton, Wincanton and surrounding areas) Salary: £45,000 - £48,000 + Bonus Shift: Monday to Friday (Double Days) Are you a highly skilled Maintenance Engineer looking f

This is for an engineer who can diagnose properly;someone who understands systems, not just symptoms. Youllbe working on specialist machinery out in the field, often as the only engineer on site.

MB674: Multi-Skilled Maintenance Engineer Location: Bury St Edmunds Salary: £40,000 Working Hours: Mon to Fri 8am to 4.

Whats in it for you as Maintenance Engineer Salary: £61,100 Hours: Permanent Nig. Join a leading manufacturing company as an Maintenance Engineer. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Mainten

Electrical Engineer - FMCG / Food Manufacturing Were looking for a skilled and proactive Electrical Engineer to join our dynamic team within a fast-paced Food/FMCG manufacturing environment.

To provide daily repair, preventative maintenance, and asset management of medical devices within various hospital locations whilst ensuring outstanding customer support and building long term relationship.Please note you must be resident in the UK with full right work.Any applications of candidates

Field Service Engineer Compressed Air & Gas Systems Location: Within reasonable travelling distance of Bedford (Bedfordshire, Buckinghamshire, Northamptonshire, North Oxfordshire, West Warwickshire) Salary: Up to £42,500 per annum (depending on experience) Hours: Full-time, 37. Monday to Friday

Service Engineer - UK Wide Job Overview: As a Service Engineer, you will be responsible for providing technical support, maintenance, and repair services on machinery.

Field Service Engineer London & South East Coverage (M4 Corridor) £35,000 £40,000 Company Vehicle Fuel Card Training A growing engineering business within the water treatment sector is seeking a Field Service Engineer to join its expanding UK service team. This is an excellent opportunity for

An established engineering business is lookin.

Job Title: Field Service Engineer (EPOS) Location: Berkshire Employment Type: Full-Time (40 hrs/week, 5 days over 7 including alternate weekends) Salary: £26,500 + Company Vehicle + Benefits Looking to Build a Career in IT Field Service A well-established provider of IT services to major UK retail

Come and join us as an Electrical Maintenance Engineer at our Sandown site in Aldridge, Walsall!.

Are you an experienced and qualified Electrical Maintenance Engineer seeking a rewarding career in a stable non-manufacturing environment, that doesnt require you to work shifts?.

The engineering department delivers exceptional cu.

Are you an apprentice trained Maintenance Engineer looking for a shift based role, within a global business that will develop your career to the next stage through technical mechanical training, and a clear scope to Shift Manager in the future?. Maintenance Engineer (3 Shift Patten).

Electrical Maintenance Engineer.

Maintenance Engineer (Packaging). Are you a Maintenance Engineer from a Mechanical / Electrical background looking for a varied role primarily in office with some travel across a regional patch within a global leading packaging machinery manufacturer who o.

We are looking for a motivated Maintenance Engineer to join a market leading manufacturing company. Multi Skilled Maintenance Engineer.

Industrial Maintenance Engineer (Electrical). Are you an apprentice trained Maintenance Engineer from an electrical background looking for a shift based role, within a global business that will look after you for years to come, through a generously paid shift allowance and a clear scope to progress

My client is a highly respected and established engineering company based in Suffolk. Reporting to the Engineering Manager, the key duties and responsibilities of the.

A growing engineering business is looking for a Field Service Engineer based in the Surrey area to cover the Southern Home Counties and South East London, maintaining large-scale industrial equipment used within commercial and passenger transport environments. Field Service Engineer - Surrey / South

Are you looking for a rewarding role in a dynamic manufacturing environment? We are seeking a reliable and motivated Production Operative to join our client on a temp to perm basis.Shift Allowance: Additional pay for PM shift.Working Hours: Monday to Friday.Afternoon Shift: 14:00 – 22:00.

This is an excellent opportunity for an electrically biased engineer to join a highly respected organisation offering f.

Knitwear Production Member Garment Seamer.Full Time | PermanentMon - Thurs (7am - 4pm).Be part of 240 years of British knitwear excellence.Are you ready to play a hands-on role in crafting world-class knitwear?.At John Smedley, weve been making the finest knitwear for over 240 years and its our pe