Process control engineer jobs in BirminghamCreate job alerts

PLEASE NOTE - This role is a hybrid role local to our Birmingham Business Park site, so please ensure you are local to this site. We do not offer sponsorship so only candidates with right to work will be considered. About Us As Principal Engineer, Power Electronics, you will be involved at all stages of the design and development process. You will liaise directly with customers, suppliers, and TAE engineering teams, to provide and deliver effective engineering solutions/power electronics designs. You will provide technical expertise in Power Electronic design which enables the delivery of successful customers and internal projects. About the Role: • Lead the Design of power electronic units and/or systems, incorporating low level analogue and digital circuits and interfaces into multicore controllers, • Experience of using power electronics devices (MOSFETs, IGBTs, etc) including wide-bandgap devices such as GaN and SiC, • Experienced in power electronics simulation (PLECS, LT Spice, Simulink, Matlab, etc…), • Experienced in design of device gate driver and low voltage power supplies, • Ability and willingness to lead a small team and act as a mentor wherever appropriate, • Generation of detailed power and analogue electronic design schematics and supporting PCB design layouts, • Generation of design verification documents to confirm compliance with national and international standards, • Active stakeholder in the development of the FMEA, Reliability prediction including MTBF analysis activities including report generation, using industry standard tools, • Ensure project documentation is correctly managed, maintained and released in accordance with company processes and procedures, • Support the delivery of unit and system FMEA and other electronics design validation activities., • Lead project level engineering change control activities, • Delivery of engineering tasks in line with project milestones, • Lead prototype builds and provides electronic support for system test and integration, • Support the technical development of TAE’s live projects and R&D products, • Support the creation of electronic technical proposals in support of TAE’s business development activities, • Support processes and procedures for electronic hardware development, • Support company engineering standards to ensure necessary levels of design quality, • Support product development through full design lifecycle to fully validation and production ready maturation levels, • Support functional safety compliance for safety critical systems at a hardware level, • Support of electronic validation activities (test and development), • Work closely with other engineering teams to develop modern, innovative, and practical solutions, • Ensure that Environmental, Health & Safety, quality standards and procedures are adhered to, • Promotes Environmental Health & Safety awareness, • Any other reasonable duties assigned in line with the requirements of the role Required Education & Experience • Around 10 years or more relevant industry experience in the transportation ___ industry for example, Automotive, Motorsport or Aerospace product development, • Extensive experience in power electronics hardware design from concept to delivery, with a good understanding of power electronic design requirements, • Working knowledge of automotive design standards, • V lifecycle and systems engineering, • The design of functional safety compliant hardware and software, as per ISO 26262, • Electric and hybrid vehicle applications, • Experience in the development of automotive OBC’s, DCDC converters, inverters and motor control, • High-voltage and high-power electronic systems, • Appreciation of C/C++ languages in real-time embedded systems, • Knowledge of single and 3-phase power quality standards Personal Attributes • Strong communication skills, • Self-motivated, creative and flexible team player, • Ability to lead specific work packages and to work in a multidisciplinary team, • Willingness to take on roles, responsibilities and challenges required to achieve company goals and objectives, • Good problem solving and analytical skills., • A self-starter and self-motivated, • Good presentation, report writing and communication skills About Us: Imagination, skill, and will We are a team of over 250 engineers, scientists, professionals, and big thinkers from over 40 countries. We work daily at the frontiers of science, to deliver products that lead humanity into a brighter era. We are not afraid to reach for the stars and build the future with fusion and science. We are looking for passionate candidates who bring their skill and will every day to accomplish our mission. At TAE Power Solutions, we design power systems that use less but do more. Systems that charge faster, run stronger, go farther, and last longer. We inspire better ways to move, work, play, and live. The future is electric because it’s powered by TAE. Confident, collaborative, and creative We are unwavering in our expertise and knowledge, separating fact from fiction and proof from hypothesis. You will be a successful member of TAE Power Solutions if you have these traits: • You are confident in your skills, based on your credentials, technical accomplishments, and positive impact on your teams/organizations., • You are collaborative, and work well within and with teams to approach challenges with respect, transparency, optimism, and confidence to succeed together., • A collaborative environment: An organization, where talents and interests can plug in to different groups outside of direct job description., • Generous payment rewards: For novel research, patents, and talent referrals, • Potential for equity participation, • Hybrid/remote work options for certain positions ___ / ___ TAE Power Solutions is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. We ensure all individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform essential job functions, and receive other benefits and privileges of employment. Note to Agencies: TAE prefers to hire directly and maintains an existing preferred supplier list. We do not accept speculative CVs or referrals from agencies. If speculative CVs are sent, no fee will be applicable

Job: Industrial Engineer – Battery Assembly Location: Birmingham, UK Hybrid work model: 5 days/week from client location Duration: 12 months fixed term employment Role and Responsibilities • Lead a team of Manufacturing Engineers as part of the Li Ion Battery Assembly area providing guidance, support, and mentorship., • Lean process planning and improvements, cost reduction & elimination of waste (NVAs) to improve competitiveness, • VSM analysis to assess the efficiency & effectiveness of current operations & ideate new future state, • Study the ergonomics & eliminate the professional hazard for workmen & improve the productivity, • Process improvement, Poka yoke, cycle time & rework reduction, • Identify opportunities in Labor Productivity, automation, standardization & lead time reduction, • Time study using observations, PMTS tools & multimodal line balancing to determine manpower requirements, • Interact within team for integrated solutions to meet guidelines, customer quality and timeline expectations., • Infer inputs from customer cross functional teams and implement requisite change requirements., • Conduct feasibility studies, cost analyses & capacity planning to support new product introductions & process improvements., • Identify and implement continuous improvement initiatives to enhance manufacturing efficiency, productivity, and quality., • Ensure compliance with safety & regulatory standards, identifying & mitigating potential risks in the manufacturing process., • Evaluate and work on utilization of equipment, tools, and technologies to optimize production capabilities and improve overall efficiency., • Provide technical expertise and support to resolve any manufacturing issues or bottlenecks in Li Ion Battery operations., • Foster a culture of teamwork, innovation, and collaboration within the manufacturing engineering team., • Utilize 2D/3D CAD (AutoCAD) to design efficient workstations, material flow paths, and floor layouts. Knowledge, Abilities & Experience • Experience about the Li Ion Battery line., • Strong leadership skills with the ability to effectively manage and motivate a team., • Knowledge of automotive manufacturing processes, standards & quality assurance practices, • Proficiency in Time study (MOST/MTM/MODAPTS), OEE calculation, Improvements - MUDA & MURI Analysis, • Excellent understanding of Lean principles, Capacity calculations, Ergonomic standards, Takt time & Cycle time calculations, Line balancing & vehicle build sequence, • Understanding process documents - Sequence of steps (SOS), Standard operating procedure (SOP), PFMEA and control plans, • Ability to provide solutions to manufacturing & productivity problems Proficiency in utilizing AutoCAD/Catia/Pro E software and manufacturing tools., • Results-oriented mindset with a continuous improvement mindset.

Job Title: Senior Mechanical Design Engineer (EV Charging) Location: Tyseley, Birmingham Job Type: Permanent Department: Engineering / Product Development Reports To: Head of Product Design About Us: Voltempo is developing rapid DC HyperCharging solutions for a range of commercial vehicle sectors, initially here in the UK, but progressively internationally as the transport sector electrifies. The company holds several international patents, it is engaged in the end-to-end design, supply, site commissioning and servicing of charging solutions, targeting commercial vehicles. The business is currently scaling and is well supported by both its international shareholders and its role under the UK Government eFreight2030 programme, where it is leading a consortium of UK logistics fleet operators to deploy the UK’s first eHGV charging network. Job Summary: We’re looking for a Senior Mechanical Design Engineer to play a key role in developing megawatt-scale EV charging systems. This is a hands-on, high-impact role suited to someone who thrives in a scale-up environment—someone who can take ownership from concept through to production, while helping shape both the product and the way we engineer it. You’ll work at the intersection of mechanical, electrical, and system-level design, contributing to robust, high-performance products deployed in real-world infrastructure, enabling the electrification of freight. Key responsibilities Product development & delivery · Lead mechanical design and development activities across the full product lifecycle—from concept and requirements through to validation and production · Develop and integrate solutions that are optimised for Manufacture (DFM), Assembly (DFA), and Cost (DFC) and that meet stakeholder, product and regulatory requirements • Lead by example, creating accurate and comprehensive 3D geometry and 2D drawings for all owned sub-systems and components, • Lead design reviews, failure mode analysis (DFMEA), and validation strategies to ensure product robustness and compliance, • Work closely with Project Managers to create risk-balanced timing plans and deliver to them, • Establish strong partnerships with suppliers to support component selection, sourcing, and qualification Engineering Quality, Validation & Compliance • Define and execute validation and verification plans, including environmental, thermal, and functional testing, • Support prototype development, build, and test activities, getting hands-on where required, • Contribute to the technical file for product compliance Process, Strategy & Team Contribution • Establish, implement, and continuously improve robust engineering processes, tools, and standards (CAD, PDM/PLM, design reviews, documentation, change control), • Contribute to product roadmap planning and technology strategy, particularly in areas of thermal management and high-power system design, • Mentor and support junior engineers, contributing to team capability growth and engineering best practices Qualifications & Experience Essential • Degree in Mechanical Engineering or related discipline (BEng/MEng or equivalent), • Extensive experience in relevant hardware/product development and associated processes, • Experience in identifying, selecting and integrating 3rd party electrical components and sub-systems, • Experience coordinating with utility providers or electrical infrastructure stakeholders., • Experience in development of high-power DC EV charging infrastructure, • Experience in development of panel enclosures, • Experience in designing for compliance with EMC and Radio (ETSI), • Experience working with EV charging standards IEC61851-1/23, IEC61851-21-2, IEC61439-1/7, • Experience working with UK wiring regulations BS7671, • Ability to lead development workstreams and deliver independently, • Ability to translate requirements into engineering concepts and develop into optimised solutions, • Excellent 3D CAD and 2D drawing skills, • Strong problem-solving and decision-making abilities, • Ability to operate effectively in a startup/scale-up environment, taking ownership across multiple areas and adapting to evolving priorities Working Conditions: · Hybrid role with office and site responsibilities. · Occasional travel to deployed infrastructure sites to support issue resolution or deployment as needed.

About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. About the role We have an opportunity for an Electrical Engineer or Senior Engineer to play a key role in delivering high‑quality, sustainable electrical engineering solutions across multiple projects in the built environment. Hoare Lea is a market-leading built environment consultancy with a proud history stretching back 162 years to our roots in Birmingham. Today we focus on delivering high-quality consultancy that addresses the issues our clients care about most. We’re looking for people who want to help shape the future, enjoy tackling complex challenges, and want their work to make a tangible difference to the communities where they live. Are you ready to get stuck in? You will own project deliverables, manage elements of the internal delivery team, and liaise with multidisciplinary colleagues, clients and contractors to ensure holistic, compliant and commercially aware solutions. You will typically lead defined elements and smaller projects (Engineer) or take full lead responsibility for larger schemes and broader client engagement (Senior Engineer). You will be helping to develop junior staff and foster relationships that support future business growth. In this key and varied role, you can expect to: • Take briefs and deliver electrical design work from inception through to completion., • Produce electrical calculations, drawings and technical documentation that comply with relevant regulations, design guides and client standards., • Ensure quality standards and technical accuracy across deliverables., • Coordinate electrical design with other disciplines (MEP and our specialist groups) and third‑party consultants., • Review and comment on technical information provided by contractors and sub‑contractors; check site installations against the design intent., • Attend and report at design team meetings, client meetings and project meetings., • Witness selected testing and commissioning activities and support handover documentation., • Manage own workload to meet programme deliverables and report progress to your line manager., • Contribute to the professional development of junior colleagues. Additional responsibilities for Senior Engineer: • Develop briefs and take responsibility for delivering a small project or the electrical discipline on a significant/complex scheme., • Exercise considerable autonomy and take ownership for technical decisions and project delivery within cost constraints., • Delegate, manage and check work undertaken by others; mentor and motivate colleagues across project teams., • Play an active role in commercial aspects (scope, risk, cost control) and ensure outputs meet project and budgetary requirements. About you To be successful in this role you’ll need: • Degree or equivalent in Electrical/Building Services Engineering; industry membership preferred., • Working towards or holding IEng/CEng., • Strong technical competence in LV distribution, lighting, earthing/protection and emergency/standby systems; able to produce calculations and drawings., • Proficient with industry software (Revit, AutoCAD, Dialux, OM Electrical) and MS Office., • Able to work independently: deliver an element of a project (Engineer) or lead discipline/small projects and larger schemes (Senior)., • Effective communicator with experience coordinating multidisciplinary teams and liaising with clients/contractors., • Experience of site checking, witnessing testing/commissioning and reviewing contractor submissions., • Demonstrable commitment to meeting programmes and quality standards; commercially aware., • Supportive team player who mentors junior staff and pursues continuous professional development (Senior expected to supervise; Engineer to support). How to apply To apply simply complete a CV profile and submit your application, or for further information please contact . If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, ___ Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list. #LI-HYBRID

Permanent Position Excellent Salary + 16.6% Shift Premium Double Day Shift Mornings (Monday – Thursday 06:00 – 14:00 & Friday 06:00 – 11:30) Afternoons (Monday – Thursday 14:00 – 21:00 & Friday 11:30 – 17:00) A profitable business, with a full order book and primed for significant growth My client are a precision manufacturing business, based in Birmingham, specialising in machining and assembly of high value low volume components. The Applications Engineer will be responsible for the development and implementation of multi-axis machining processes within the machine shop. The role combines digital process development, structured verification and on-shift technical support to ensure stable, production-ready manufacturing solutions are delivered to a consistently high standard. You will take ownership of multi-tasking mill-turn machining processes from concept through to stable production release, ensuring robust, verified and production-ready manufacturing solutions are implemented to a consistently high technical standard. The role is expected to uphold and reinforce strong technical discipline within the machining function. Applications Engineer Job Description Multi-Tasking Multi Axis Machining & Process Development • Develop complete machining strategies for complex mill-turn components, including operation sequencing, datum strategy, tooling selection and work holding approach., • Create and optimise multi-axis CNC programs using CAM software., • Ensure machining processes are stable, repeatable and production ready prior to release., • Ensure datum control and clamping methods align with GD&T requirements., • Support implementation of probing strategies including in-process inspection and wear compensation where appropriate. Digital Simulation & Verification • Perform full digital simulation and collision verification of all multi-axis machining processes using Vericut prior to shop floor release., • Maintain high standards of simulation compliance and documentation., • Contribute to the ongoing development of best practice in digital verification methods. Process Implementation & Production Readiness • Support machining strategy development during New Product Introduction (NPI), identifying technical risk and ensuring robust process definition prior to production release., • Produce complete process documentation including setup sheets, tooling lists and structured release information., • Define accurate manufacturing routings and operation time standards in collaboration with Planning., • Provide structured prove-out support during initial production runs., • Ensure smooth transition from development to stable production. Tooling, Workholding and Technical Problem Solving • Take ownership of tooling selection and troubleshooting for complex multi-axis machining operations., • Diagnose and resolve issues relating to stability, tool life, vibration and surface integrity., • Apply best practice in cutting strategy and machining efficiency., • Design and implement bespoke workholding solutions to support robust machining strategies. Engineering Governance & DFM • Confidently interpret complex GD&T drawings., • Provide structured manufacturability feedback to Design Engineering., • Support technical reviews and challenge constructively where risk or inefficiency is identified. Continuous Improvement and Proactive Engineering • Identify and lead machining improvement initiatives from concept through to implementation., • Improve process stability, reduce rework and minimise reactive intervention., • Contribute to the long-term development of automated and lights-out machining capability. Applications Engineer Essential Skills / Experience / Qualifications • Experience with multi-tasking mill-turn machines (e.g. Mazak Integrex or equivalent), • Experience using Vericut for process verification, • Proven capability developing complex multi-axis machining processes, • Solid understanding of CAM programming principles (SolidCAM desirable), • Time-served apprenticeship in CNC / Manufacturing Engineering or equivalent practical training

Industrial Engineer – Battery Assembly Birmingham UK (onsite role) Fix term role Role and Responsibilities • Lead a team of Manufacturing Engineers as part of the Li Ion Battery Assembly area providing guidance, support, and mentorship., • Lean process planning and improvements, cost reduction & elimination of waste (NVAs) to improve competitiveness, • VSM analysis to assess the efficiency & effectiveness of current operations & ideate new future state, • Study the ergonomics & eliminate the professional hazard for workmen & improve the productivity, • Process improvement, Poka yoke, cycle time & rework reduction, • Identify opportunities in Labor Productivity, automation, standardization & lead time reduction, • Time study using observations, PMTS tools & multimodal line balancing to determine manpower requirements, • Interact within team for integrated solutions to meet guidelines, customer quality and timeline expectations., • Infer inputs from customer cross functional teams and implement requisite change requirements., • Conduct feasibility studies, cost analyses & capacity planning to support new product introductions & process improvements., • Identify and implement continuous improvement initiatives to enhance manufacturing efficiency, productivity, and quality., • Ensure compliance with safety & regulatory standards, identifying & mitigating potential risks in the manufacturing process., • Evaluate and work on utilization of equipment, tools, and technologies to optimize production capabilities and improve overall efficiency., • Provide technical expertise and support to resolve any manufacturing issues or bottlenecks in Li Ion Battery operations., • Foster a culture of teamwork, innovation, and collaboration within the manufacturing engineering team., • Experience about the Li Ion Battery line., • Strong leadership skills with the ability to effectively manage and motivate a team., • Knowledge of automotive manufacturing processes, standards & quality assurance practices, • Proficiency in Time study (MOST/MTM/MODAPTS), OEE calculation, Improvements - MUDA & MURI Analysis, • Excellent understanding of Lean principles, Capacity calculations, Ergonomic standards, Takt time & Cycle time calculations, Line balancing & vehicle build sequence, • Understanding process documents - Sequence of steps (SOS), Standard operating procedure (SOP), PFMEA and control plans, • Ability to provide solutions to manufacturing & productivity problems Proficiency in utilizing AutoCAD/Catia/Pro E software and manufacturing tools. B Tech in Mechanical Engineering or equivalent Personal Skills • Ability to work in a fast moving/changing environment., • Appreciation of the end customer and their requirements, • Shows integrity in ability to deliver on commitments, • Open mindset and willingness to learn new skills., • Engaged and enthusiastic to create a positive impact 8 to 10 years of experience in Automotive Industrial Engineering.

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

Project Engineer - Solar PV Projects Location: 100% Remote Employment: Contract Duration: 9 Months Role Purpose The Project Engineer is responsible for the technical development, design, and execution of solar PV projects, both Behind-the-Meter (BtM) and Grid Connected (GC) across all project stages. This role ensures that projects are engineered to meet performance, safety, and quality standards, supporting the organization’s mission to deliver reliable, efficient, and innovative renewable energy solutions. 1. Project Engineering Across All Stages Development Stage: • Provide technical input for site assessments, feasibility studies, and conceptual designs., • Support the preparation of technical documentation for permitting and grid connection applications., • Collaborate with development, commercial, and external partners to optimize project layouts and technology selection. Design Stage: • Lead the review of the detailed engineering design performed by third parties, including electrical, mechanical, civil, and communication aspects., • Coordinate with internal and external designers/advisors, ensuring compliance with codes, standards, and best practices., • Prepare and review technical specifications, drawings, and BoQs for procurement and construction. Execution Stage: • Provide technical support during procurement, construction, and commissioning., • Review and approve contractor submittals, manage technical queries, and resolve site issues., • Ensure quality control and compliance with design intent throughout construction and handover. 2. Continuous Improvement & Knowledge Sharing • Capture lessons learned and contribute to the development of engineering standards and templates., • Support innovation and the adoption of new technologies and processes. Key Interfaces: • Procurement & Construction, • Site Development, • Investment, • Revenue, • BTM Sales, • External consultants, contractors and regulatory authorities, • Asset Management Goals & KPIs • Successful delivery of project engineering deliverables on time and within budget., • Achievement of project performance, safety, and quality targets., • Positive feedback from internal and external stakeholders., • Contribution to set up the technical function across the company through process improvements and knowledge sharing. Qualification criteria • Degree in Engineering (Electrical, Civil, Mechanical, or related field), • +3 years of experience in solar PV project engineering (BtM and/or Grid Connected), • Proficient in PVSyst and CAD software such as AutoCAD, BricsCAD, PVCase, etc., • Must have worked on similar UK solar PV projects., • Experience with BESS will be positively considered., • Familiarity with relevant codes, standards, and permitting processes., • English fluent is mandatory; other languages such as Swedish or Spanish are desirable., • Strong communication and teamwork skills.

Jackson Hogg is delighted to be supporting our client in their search for a Senior Electrical Engineer. Our client are a UK based zero emissions power generation business looking for a remote based Senior Electrical Engineer join the team and strengthen the engineering capabilities across their hydrogen production and customer power generation (HPU) activities. You’ll join an innovative and rapidly growing company, working to realise significant commercial decarbonisation at scale using zero emission fuels. Responsibilities: • Read and understand technical specifications and customers requirements, • Develop and review design packages for electrical systems and equipment (e.g Power and Distribution Transformers, generators, hv / lv switchgear / Motor Control Centre, distribution networks, control equipment, power outlets) including drawings, detail scope of work, calculations, Bill of Materials, • Develop and review electrical and project documentation, • Carry out detailed site surveys Qualifications • Bachelors or Masters Degree in Electrical or Electronic Engineering, preferably Chartered with IET / IEEE (1st class desirable), • Significant experience in Electrical Engineering within process systems (O&G, Energy, Petrochem), • Experience with Autodesk / AutoCAD preferable, • Competency in reading and understanding technical drawings

Senior Cloud Engineer Location: London / Manchester / Leeds (Hybrid) Function: Cloud Engineering / DevOps Salary: Up to £70,000 + bonus + comprehensive benefits About the Role Our client is a major UK digital, cyber and intelligence organisation delivering secure technology solutions across National Security and critical infrastructure programmes. With thousands of specialists operating globally, they design and build resilient, high-assurance systems in some of the most demanding environments in the country. Due to sustained growth across National Security accounts, they are hiring Senior Cloud Engineers to join their Gloucester team. This is not a generic cloud role. You will be working on secure government and critical systems where reliability, resilience and security are essential. You will operate within multi-disciplinary engineering teams, shaping cloud-native solutions that directly support nationally significant programmes. What You’ll Be Doing • Designing and building secure, cloud-native architectures in AWS, • Deploying infrastructure using Terraform, CDK or CloudFormation, • Creating and managing scalable infrastructure environments, • Implementing configuration management using tools such as Puppet, Chef or Ansible, • Building and managing containerised environments using Kubernetes, ECS or OpenShift, • Applying AWS security best practices and embedding secure-by-design principles, • Managing source control and software configuration across projects, • Engaging with internal and external stakeholders, • Leading teams or mentoring engineers at Senior level This is hands-on engineering. You will be expected to design, build and improve cloud platforms rather than simply maintain them. Ideal Background You should be able to demonstrate: • Strong experience across AWS services and modern cloud patterns, • Infrastructure as Code expertise, such as Terraform, CDK or CloudFormation, • Configuration management experience, • Solid networking fundamentals and understanding of software-defined networking, • Container orchestration experience, • Scripting capability in at least one language such as Python, Bash or Go, • AWS certifications are desirable but not essential The environment rewards engineers who stay current with new AWS releases and evolving best practice. What You’ll Receive • Salary up to £70,000, • Annual bonus, • DV Bonus - £7,000 annually, tax-free, paid quarterly, • 25 days holiday with buy/sell options, • Private medical and dental cover, • Competitive pension, • Flexible benefits package, • Hybrid and flexible working arrangements, • Structured career development with a dedicated career manager, • Funded training and certification support Senior Engineers are supported to progress into technical leadership or architecture pathways. Security & Eligibility Due to the nature of the work, you must: • Have permanent and unrestricted right to work in the UK, • Be eligible for Government DV clearance This role sits within National Security and critical infrastructure programmes. Clearance is mandatory. Who Should Apply This role suits experienced AWS Cloud Engineers who want to work on secure, high-impact systems rather than standard commercial platforms. If you value engineering discipline, structured delivery and exposure to nationally significant programmes, this warrants a conversation. If you would like further detail on the projects, team structure or clearance process, get in touch directly.

Senior/Principal Mechanical Engineer Birmingham About us Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. About the role Hoare Lea is a market-leading built environment consultancy; we’ve got a history as long as your arm – longer probably as we’re 162 years old and it all started in Birmingham. Today we’re focussed on how we can help our clients by providing leading consultancy on the things that matter to them. We’re looking for people who want to help us shape the future, who love a challenge and want their work to have a real impact on real people in the city they live in. Are you ready to get stuck in? A fantastic career opportunity has arisen for a creative and driven Senior/Principal Mechanical Engineer to join us in Birmingham. As a Senior/Principal Engineer, you will be responsible for supporting and delivering designs for a range of project types and sizes. You will work within a multidisciplinary team of engineers and support staff delivering a consistent high-quality service for clients, ensuring that repeat and new business opportunities are developed and profitability is achieved. In this key and varied role, you can expect to: • Design mechanical engineering systems at the highest level using the latest software design packages, including AutoCAD and REVIT., • Lead mechanical services design on large projects and taking overall lead on small to medium-sized projects within the office., • Engage with junior support staff in their day-to-day activities and offer advice and guidance to ensure they develop their skills., • Ensure technical delivery in your work, either alone or as part of a team., • Financially astute - work with the project leader to monitor fee expenditure, resources, and work delivered., • Innovating and researching new ways of working, keeping abreast of competitors., • Create and maintain a high reputation within the industry, adhering to quality management and risk control procedures. About you To be successful in this role you’ll need: • Proven experience working as a Mechanical Engineer or closely related role, with a track record delivering on a variety of complex projects., • Understanding of all mechanical services including heating, ventilation and air conditioning., • Experience working in a multi-disciplinary environment, with excellent communication skills with both internal and external clients, and a team-based work approach., • Use of relevant software/tools such as Revit and AutoCAD., • Self-awareness, an open mind, and a spirit of generosity., • Conversant with relevant British Standards., • Consultancy experience., • Previous consultancy experience, you will appreciate the importance of complementary specialisms such as acoustics, fire engineering and computer modelling in the design of buildings and be adept at analysing and interpreting their impact on your work. How to apply To apply simply complete a CV profile and submit your application, or for further information please contact . If shortlisted, one of our recruitment team will be in touch to arrange a introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. Adjustments and accommodations If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. Data privacy We have updated our terms and conditions for candidates, click here to find out more. Recruitment agencies We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Job Description for Design Engineer (Mechanical/Chemical/Process) Environmental Control Systems Location: Remote (UK-based) with travel to client sites Grade: S4 – Intermediate Project/Design Consulting Engineer Salary: £42,000 – £48,000 per annum (dependent on experience) Contract: Permanent, full-time (40 hours/week, flexible) Reports to: Managing Director / Senior Engineer OUR COMPANY MECHON is an independent environmental control systems consultancy. We design ventilation, LEV, specialist HVAC, and air pollution control systems for manufacturing, defence, pharmaceutical, and R&D environments across the UK and internationally. Our clients include major defence contractors, automotive manufacturers, chemical companies, and research facilities. We are not a contractor or installer. We are the consulting engineers who assess the problem, design the solution, write the specifications, and oversee delivery. Our work combines chemical and mechanical engineering — from workplace exposure assessment and DSEAR risk analysis through to full system design, dispersion modelling, and commissioning support. We are looking for a Design Engineer to join our team at Intermediate level (Grade S4), with a structured 2–4 year development pathway toward becoming a fully independent consulting engineer. WHAT YOU'LL DO You will work under the guidance of senior engineers to deliver environmental control system designs from concept through to completion. This is a consulting engineering role — the primary outputs are engineering calculations, risk assessments, technical reports, and design specifications. We have a dedicated CAD team; drawing production is not your core function. Your responsibilities will include: • Engineering calculations for LEV and process HVAC systems (airflow, pressure drop, thermal loads, exposure benchmarking), • ite surveys and audits to assess existing systems and gather design information, • Risk assessment work including COSHH exposure assessment and DSEAR under senior supervision, • Technical report writing and design specifications for clients, • Client liaison - attending design meetings, presenting findings, managing technical relationships, • Supporting project delivery from concept through to commissioning and handover WHAT WE NEED FROM YOU We don't expect you to arrive as a ventilation specialist. We do expect a solid grounding in engineering fundamentals that we can build on. Essential: • Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline, • Minimum 3 years' post-graduation engineering experience (does not need to be in ventilation, • process engineering, chemical plant, risk assessment, building services, or similar are equally relevant), • Working knowledge of fluid dynamics, thermodynamics, and heat transfer applied in a professional setting, • Strong written English and the ability to produce clear, structured technical reports, • Full UK driving licence, • UK right to work Desirable: • Experience with risk assessment methodologies (HAZOP, DSEAR, COSHH, or similar), • Exposure to consultancy or client-facing technical roles, • Professional registration or working toward CEng/IEng, • Competence with CAD software (AutoCAD, Revit, or similar) THE KIND OF ENGINEER WHO DOES WELL HERE Our environment is different from a large consultancy. There's no layer of project managers between you and the client. You won't have a team of 20 around you. What you will have is direct responsibility, genuine autonomy, and senior engineers who will invest time in your development. Our most successful engineers share certain qualities: they take ownership of problems without waiting to be told, they communicate clearly under pressure, they're motivated by the quality of their work rather than their job title, and they have the patience to develop genuine expertise in a specialist discipline. Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. What matters more than your specific discipline is how you think, how you communicate, and whether you take pride in producing work that stands up to scrutiny. WHAT WE OFFER • £42,000 – £48,000 depending on experience, • Fully remote working with UK-wide site visits, • Structured development programme with senior engineer mentoring, • Funded CPD and professional development (training courses, BOHS qualifications, chartership support) 22 days annual leave plus bank holidays, increasing to 25 at the next grade, • Pension with employer contribution, • Travel expenses for site visits fully reimbursed, • A specialist consultancy where your engineering skills are the product, not a support function HOW TO APPLY Please submit your CV and a brief covering statement (no more than 300 words) explaining why this role interests you and what you would bring to MECHON. We are particularly interested in the breadth of your professional experience and how you approach unfamiliar technical problems. We don't use automated screening. Every application is reviewed by the team.

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Our values Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role The Thin Film Ellipsometry Process Engineer is responsible for developing, optimising, and controlling thin-film optical measurement and characterisation processes to support high-yield, high-performance semiconductor device fabrication. This role focuses on ellipsometry-based metrology for deposited thin films across development and production environments. Key Responsibilities • Develop, qualify, and optimise ellipsometry measurement processes for thin films (thickness, refractive index n/k, composition, and uniformity)., • Support R&D and new materials development by providing accurate thin-film characterisation, measurement development, and data analysis., • Own and maintain ellipsometry process recipes, optical models, and control strategies., • Provide accurate metrology feedback to thin-film deposition processes (e.g., PVD, CVD, ALD)., • Analyse film properties including thickness mapping, optical constants, and process-induced variation., • Develop and refine optical models for multilayer thin-film stacks., • Utilise statistical process control (SPC) to monitor tool performance and process stability., • Conduct root cause analysis for measurement drift, model instability, or yield excursions related to film properties., • Collaborate with equipment and process engineering teams to maintain and improve metrology tool performance., • Support new product introduction (NPI) through film characterisation, DOE planning, and process transfer., • Generate technical reports and present findings to engineering and management teams., • Ensure compliance with safety and cleanroom protocols. Skills, Knowledge and Expertise • Bachelor’s or Master’s degree in Materials Science, Physics, Electrical Engineering, or related field., • 3–7+ years of experience in semiconductor or advanced thin-film processing environments., • Strong hands-on experience with spectroscopic ellipsometry., • Solid understanding of thin-film optics, dispersion modelling, and multilayer analysis., • Experience correlating ellipsometry data with complementary techniques (e.g., XRD, AFM, profilometry)., • Strong data analysis and problem-solving skills., • Strong ownership mentality with the ability to work independently in a fast-paced environment., • Adaptable and comfortable with evolving priorities and rapid change., • Excellent cross-functional collaboration skills (working effectively with process, equipment, R&D, and manufacturing teams)., • Clear and confident communicator, able to present technical findings to both technical and non-technical audiences., • Experience with compound semiconductor or dielectric thin films would be an advantage.

Role: Principal Civil/Structural Engineer Location: Devonport(Occasional site visit) Duration: 12 months(Long term - project goes until Dec 2028) Inside IR35 The role We are looking for a Principal Civil/Structural Engineer ‎to support delivery of civil/structural subway systems as part of the subways Team in Devonport. Lead on the Structural / Civil works required for: • Refurbishment design proposals for the existing extant subways within the 10D site. Day-to-day, you’ll be supporting the engineering capability of the new systems through the design lifecycle in accordance with the design process. Key responsibilities will include: • Lead and manage one or more technical design packages ensuring requirements are met through the design process, • Provide technical design guidance and review of sub-contract design to ensure compliance with specifications, technical regulations and standards, • Collaboration across engineering functions and stakeholders to integrate designs within the overall facility layout and manage interfaces, • Maintaining the engineering configuration of the design intent (change control) Essential experience: • Design of high complex services subways/routes preferably in a Nuclear/ Regulated environment, • Regulations, legislation and standards that are applicable to civil/structural design and construction (including Principal Designer responsibilities under CDM), • Substantiation of SFR’s when identified within systems to support the nuclear safety case, • Able to demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle., • Provide expert advice to the sub-contracted design houses to enable them to develop the design., • Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements., • Experience of working in BIM environments., • Awareness of project planning, project management and budgeting., • Sound understanding of company and departmental procedures relating to Design, Health & Safety and Quality requirements and ability to manage projects in accordance with these procedures., • Collaborate with other design houses regarding the proposed works and the required changes to the subways to facilitate their designs., • Support development and lead implementation of assurance and governance activities for subway remedial works and new design development Qualifications • Degree in Civil/Structural Engineering., • Chartered Engineer with membership of an accredited body (i.e. ICE) or working towards chartered status. Or significant experience. Due to the nature of the work carried out at our client’s site, these roles are subject to specific nationality requirements and are only open to sole British citizens. Candidates who meet this criterion will also be required to undergo security clearance vetting.

Important A CV and a short cover letter are required for this role. Applications submitted without BOTH will not be reviewed. If you are unable to attach a cover letter via LinkedIn, please email it to , including your NAME, the ROLE TITLE, and CONFIRMATION THAT YOU HAVE APPLIED ON LINKEDIN in the subject line. Please complete all follow-up questions to progress to the next stage. Salary: £60,000 - £70,000 DOE About iQ HealthTech At iQ HealthTech, we are dedicated to improving healthcare outcomes through innovative technology. Our flagship product, iQemo, supports safer and more efficient electronic systemic anticancer treatment (SACT) prescribing and is used by the NHS, private healthcare providers in the UK, Australia and beyond. As we continue to expand into new regions, our systems are built to operate in complex, regulated healthcare environments worldwide. Our systems support clinicians making critical decisions every day. Reliability, clarity and thoughtful engineering matter here. As we grow into new regions, we design our platforms to scale across jurisdictions, healthcare models and regulatory expectations without losing focus on quality or safety. Role Summary We are looking for a hands-on Platform and Cloud Engineer to help strengthen, simplify, and scale the cloud and delivery platform behind our products. This is a key role in a small but ambitious UK healthtech company operating in a regulated environment. Our core product, iQemo, is a cloud-hosted electronic chemotherapy prescribing solution used in oncology care. We also operate an Insurer Portal and support a growing data services capability. The role suits someone with strong Azure infrastructure, Kubernetes, CI/CD, and DevOps capability, combined with a practical, service-oriented mindset. You will improve reliability, observability, deployment maturity, security posture, and infrastructure consistency, while working closely with developers to reduce operational friction and support more frequent, lower-risk releases. We are looking for someone technically strong, pragmatic, and calm under pressure, who is comfortable taking ownership of a cloud estate where priorities matter and good judgement counts. Why Join Us? • Fully remote role with flexible working options, • Personal development plans, including a professional development/training budget, • 25 paid holiday days plus bank holidays (your birthday off too!), • Enhanced maternity and paternity pay, • 4% employer contribution to company pension scheme, • Access to wellbeing apps, • Government-set working from home monthly allowance, • An opportunity to make a real difference by developing technologies that improve patient outcomes, • Paid out-of-hours developer support rota once onboarded, • Competitive salary with regular reviews and opportunities for growth, • Work with innovative systems serving both national private providers and the NHS Duties and responsibilities You will own and improve the cloud and platform foundations that support our products and engineering team. That includes Azure architecture and operations, Kubernetes platform support, CI/CD pipeline improvement, infrastructure as code, monitoring and alerting, identity and access configuration, environment reliability, and operational support. You will also play an important role in strengthening our security and compliance posture, supporting controls aligned with frameworks such as Cyber Essentials, SOC 2, and ISO 27001, and helping ensure our infrastructure and delivery practices are appropriate for a regulated healthtech SaaS business. As part of a small organisation, the role includes broader technical operations such as infrastructure troubleshooting, Microsoft 365 and Entra administration, networking support, and occasional out-of-hours work for critical issues or planned changes. Participation in a paid out-of-hours support rota is required once fully onboarded. Platform, cloud, and infrastructure • Own and improve our Azure environment architecture, configuration, maintenance, and operational health., • Support and evolve our cloud platform to improve stability, resilience, observability, security, and cost control., • Manage and support Kubernetes-based workloads, including deployments, configuration, troubleshooting, scaling, and operational reliability., • Maintain and improve core infrastructure services, environments, and platform components across development, test, and production., • Support infrastructure standardisation and simplification to reduce operational overhead and environment drift., • Build, maintain, and improve CI/CD pipelines to support faster, more reliable releases., • Work closely with developers to improve deployment automation, environment consistency, rollback capability, and release confidence., • Support a move from heavy, manual release processes toward more automated, repeatable, and controlled delivery., • Improve developer experience by reducing platform friction and making environments and deployment paths easier to use and support., • Maintain and extend Terraform-based infrastructure as code., • Improve automation for environment provisioning, configuration, deployment, and operational support tasks., • Support a proportionate, risk-based security posture across cloud infrastructure and delivery pipelines., • Contribute to infrastructure and operational controls aligned to Cyber Essentials, SOC 2, and ISO 27001 expectations., • Support secure identity and access management across Azure, Entra ID, and Microsoft 365., • Help improve secrets management, patching, vulnerability management, auditability, backup and recovery, and incident readiness., • Improve monitoring, logging, alerting, dashboards, and operational visibility across environments and services., • Support troubleshooting of infrastructure, deployment, networking, and platform issues., • Assist with server management and environment support, including some out-of-hours support where required., • Support SSO and identity-related platform configuration in Azure / Entra., • Help resolve networking issues to and from our infrastructure., • Support administration and management of Entra ID and Microsoft 365 services where needed., • Provide broader technical operations and IT platform support appropriate to a small company environment. Key Skills Essential experience and skills • 6+ years’ experience in a relevant Platform Engineer, Cloud Engineer, DevOps Engineer, or Infrastructure Engineer role., • Strong hands-on experience with Microsoft Azure in production environments., • Strong experience building and maintaining CI/CD pipelines., • Practical production experience with Kubernetes, including deployment, troubleshooting, monitoring, scaling, and operational support., • Strong experience with Terraform or comparable infrastructure-as-code tooling., • Experience with Argo CD, GitOps approaches, or equivalent modern deployment tooling., • Strong understanding of cloud networking, access control, and infrastructure troubleshooting., • Experience improving platform reliability, observability, and operational readiness., • Experience supporting security controls and infrastructure compliance in a business-critical environment., • Good understanding of identity and access technologies including Entra ID / Azure AD, SSO, and Microsoft 365 administration., • Able to work closely with software developers and act as an enabling technical partner, not just an infrastructure gatekeeper., • Experience in healthtech, regulated SaaS, or another compliance-driven environment., • Experience with frameworks such as Cyber Essentials, SOC 2 or ISO 27001, • Experience with observability tooling, incident response processes, and production support improvement., • Experience managing or supporting Windows servers and mixed environments., • Experience with SQL Server, database administration, or performance/support troubleshooting., • Experience moving teams from manual to automated delivery processes, • Calm, pragmatic, and reliable under pressure., • Strong ownership and follow-through, • Good judgement about risk, especially in live and regulated environments., • Able to balance speed with control., • Collaborative with a strong service mindset, • Comfortable with both strategic improvement and hands-on work, • Clear communicator across technical and non-technical audiences Why this role matters This role is central to improving platform stability, reducing delivery risk, strengthening security, and enabling more reliable and frequent releases. It supports the foundations needed for future product growth, interoperability, and data capability. In the first 12 months, you will improve platform stability, security, and scalability, enabling smoother releases, stronger monitoring, and less friction for engineers. Our Recruitment Process We’re committed to maintaining a safe and compliant workforce. The successful applicant will be appointed subject to satisfactory references and a basic DBS check. Applicants must have the legal right to live and work in the UK; we are unable to offer sponsorship.

Senior Systems Engineer £87.83 per hour (Inside IR35) Mostly remote - 1-2 days per month on site, Barrow or Sheffield 12 months Senior Systems Engineer reporting to the Systems Engineering Function Lead within the Weapon Systems Engineering function. The role requires a good understanding of Model Based Systems Engineering (MBSE), Requirements management, Interface Management, Integration, and V&V stages of the Engineering Lifecycle. They should be experienced in working withal stakeholders including the internal project team, external customers, and the various design teams (S/W, Mech, Elec etc.). They should also be experienced in managing the engineering design stages: from the initial concept; design and development; testing and qualification; through to final manufacture and implementation of a new product or sub-system. • Elicitation of user needs from internal/external customers., • Elicitation of stakeholder needs across internal/external stakeholders., • Elicitation of CONOPS from internal/external customers & stakeholders., • Translation of CONOPS into MBSE use case and activity/sequence diagrams., • MBSE Architecture development (Form, Function, Behaviour diagrams)., • Allocation of requirements to MBSE architecture., • Development of requirements through derivation, development, architecture etc., • Allocation of requirements and architectural artifacts to design teams, and task management of those activities., • Interface requirements development., • Interface Control management., • Verification and Validation of all aspects of the system., • Integration of the system from smallest component to entire system., • Develop, maintain and control the technical interface to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues and to deliver contractual commitments., • Adhere to process governance, including developing the design of modifications and improvements to processes in accordance with relevant standards, best practice and developing needs., • Validation of any systems / equipment, which may include the generation of test schedules, test and integration plans and the writing/investigation of test problem reports., • Answer technical queries. Skills • Experience of Dassault Systèmes Cameo Systems Modeller MBSE tool., • Experience of Simulation & Stimulation techniques., • Experience of SysML., • Familiarity with PLM tools (Teamcenter) and the links to the ERP system (SAP)., • Experience of Jira task management., • Knowledge of MoD/DoD organisations and have experience of direct customer and supplier liaison., • Knowledge of lifecycle processes. Qualifications • The candidate shall have a degree in a relevant Engineering discipline plus a minimum of 5 years Systems engineering experience., • Meets the requirements for registration as incorporated or chartered engineer and preferably a member of a relevant professional body.

Principal Engineer - Software Assurance £65.98 p/hr - Inside IR35 12 months Defence 1-2 days a month on site, Coventry, Barrow, Frimley or Weymouth Our complex platforms are increasingly driven by Software, assuring the quality of this and the proper integration is critical to our success. Software assurance is the ongoing process to ensure that software products meet and comply with software engineering, quality and safety standards. It is a systems engineering activity that that supports the achievement of functional and multiple non-functional requirements and is applicable to the whole engineering lifecycle from concept design to in service support. This is a growing role within our business and industry with significant potential for development and further growth. We expect the candidate to quickly develop an understanding of the development, use and control of software in our complex and unique application. Being actively involved in the decision making and problem resolution for some of the most critical aspects of our design. This opportunity offers a uniquely broad view of the programme, business and customer organisations which offers significant development both technically and personally. Working in the deployed Program software assurance team you will work with system designers and our suppliers to ensure the quality and reliability of the delivered products. You will ensure that the boat's safety and functional requirements are met and that risk is identified and managed. This responsibility breaks down into the following tasks. • Work with our customer to agree an acceptable approach to risk, • Plan and carry out software assurance activities including reviews of plans, processes, witnessing testing, inspections and auditing, • Review software plans, documentation and software aspects of system level plans and documents to provide timely and meaningful feedback, • Engaging with system designers, other engineering disciplines and software developers to in the design process to ensure that software meets requirements, • Document the level of risk, provide evidence and reporting for senior management, • Work with a range of stakeholders at all levels to resolve non-conformances and programme risks. Requirements and skills Experience Essential • There are large number of software types and includes programmable electronics. Detailed knowledge of all types is not required, but a good understanding of the principals of the software lifecycle and the application to other types of software is critical to the role., • Understanding of Systems engineering lifecycle and how this relates to software, • Experience of Software Assurance Methods and processes, including audit and review., • Understanding of the application of software engineering, security, quality and safety standards, • Problem Solving: The analysis and resolution of problems., • Writing of clear and concise reports with clear recommendations. Typically with software assurance there are no completely right answers. Often it deals with opinions. So it is critical to be able to clearly describe problems, its analysis and link it to recommendations., • Stakeholder management

About CleverChain CleverChain is a growth-stage RegTech company, an award-winning KYB platform recognised by Chartis Research for Best Know Your Business (KYB) and by Datos Insights for Best KYC/KYB Innovation. Our cloud-based platform automates compliance processes, streamlining customer onboarding and risk monitoring for financial institutions, fintechs, payment providers, and any organisation that needs to verify and manage their customers. We're at a pivotal moment of growth and looking to make critical hires that help us get there Role Overview We've recently built a new platform from the ground up, a multi-tenant, multi-region distributed microservices platform that serves as the foundation for all of our products. The platform was purpose-built to remove engineering as the bottleneck in product development: it provides a workflow and agent execution engine, a provider framework, and a tooling layer that allows our product teams to ship new agents, workflows, and products in days or weeks, not months. Because of this, the core engineering focus isn't building individual product features on repeat. It's building and maintaining the engine itself, extending its capabilities, expanding its toolsets, and ensuring the platform gives product teams and customers the flexibility they need to build on top of it without waiting for engineering cycles. We're looking for a Principal Software Engineer to join as one of the first hires on this platform. You'll work across the full backend, from database schema design and API implementation through to workflow orchestration, AI integrations, and infrastructure. This isn't maintenance work. It's building. The platform has genuine depth: multi-region deployments with data residency compliance, a durable workflow execution engine, autonomous AI agents, and a 3-tier database architecture with physical tenant isolation. You'll encounter hard problems regularly, and you'll have the room to solve them properly. Critically, this is a high-traffic, low-latency, high-availability platform. We're building toward handling millions of requests per day across multiple regions, and non-functional requirements such as scalability, data storage optimisation, latency, availability, cost optimisation are first-class concerns, not afterthoughts. Every feature you build needs to be designed with these considerations from the start. We service global financial institutions and are subject to some of the strictest regulatory requirements around data residency, data transfer, and information security. Security isn't bolted on, it's a foundational layer. Data isolation, encryption in transit and at rest, GDPR compliance, and jurisdictional data storage and processing are built into the architecture from the ground up, and you'll be expected to maintain and extend that standard in everything you build. What You'll Do • Build and extend the platform engine — new workflow node types, control flow improvements, human-in-the-loop infrastructure, provider capabilities, and tooling that product teams consume, • Design for scale and performance — optimise data storage patterns, manage connection pooling across a large number of tenant databases, reduce latency in high concurrency multi-tier data access and in workflow / agent orchestration, and ensure the platform handles high throughput without degradation, • Build event-driven integrations — services that subscribe to workflow and agent completion events and trigger downstream actions, extending the platform's reactive capabilities, • Integrate AI/LLM capabilities — Multi modal, tool calling / MCP, semantic routing, provider management, agent orchestration including A2A, token and cost tracking, streaming patterns, • Uphold security and compliance standards — tenant data isolation, encryption, access control patterns, credential management, and audit logging in a regulated financial services context, • Work across the data layer — schema evolution across multiple database tiers, migration tooling, tenant provisioning, query optimisation, and caching strategies, • Contribute to infrastructure — Terraform modules, Docker builds, CI/CD pipelines, deployment automation, monitoring and observability, • Maintain platform quality — comprehensive testing, strict TypeScript, shared library architecture, structured error handling, performance benchmarking Who You Are • End-to-end owner — you take problems from understanding through to deployment and monitoring. You don't wait to be told what to do next, • Platform thinker — you understand the difference between building a feature and building a capability. You design with product teams and customers in mind, • Performance-minded — you instinctively consider how things behave under load. It's part of how you think, not a box you tick before release, • Security-conscious — you treat security as a responsibility, not a checklist. You care about getting it right because the data matters, • Strong communicator — remote work demands clear writing. You're effective in PRs, documentation, and async conversations, • Pragmatic about quality — you care about code quality as a tool for moving faster, not as an abstract ideal. You write tests because they help, not because someone told you to, • Collaborative and open — you bring strong ideas to the table and you're happy to debate them, but you're equally comfortable being convinced otherwise Skills & Experience Must Have • Strong TypeScript / Node.js — you write strict, type-safe code and are comfortable with generics, decorators, and advanced patterns, • Backend framework experience — Express, NestJS, Fastify or similar structured MVC or modular frameworks with dependency injection, middleware, and guard patterns, • Relational database proficiency — schema design, migrations, indexing, query optimisation, transactions, and connection management at scale, • Containerisation — building, running, and debugging containerised services in local and production environments, • API design — RESTful services with proper authentication, authorisation, pagination, error handling, and rate limiting, • Performance and scalability — you've built systems that handle significant traffic. Caching strategies, connection pooling, query optimisation, and low-latency design are second nature, • Security fundamentals — encryption, secrets management, data access boundaries, audit logging. Experience in regulated industries is a strong plus, • Distributed systems experience — services communicating across network boundaries, consistency trade-offs, multi-region deployment challenges, • Durable workflow / orchestration engines — experience with systems that guarantee execution completion across failures and long-running processes (e.g .DBOS, Restate). Experience with Temporal is a strong plus., • Infrastructure-as-code — managing infrastructure declaratively with version-controlled tooling, • Testing — unit and integration testing, mocking strategies, high coverage targets, • CI/CD and Git — automated pipelines, branching strategies, PR-based workflows, • Event-driven patterns — pub/sub, message queues, event subscriptions, async processing, • Cloud infrastructure — deploying and managing services, databases, caching layers, and storage on a major cloud provider, • Multi-tenant architecture — database-per-tenant patterns, tenant isolation, data residency compliance, • AI/LLM integration — working with LLM provider APIs, function/tool calling, agent patterns, prompt engineering, • ORM tooling — type-safe database access with migration management, • Monorepo management — build orchestration, affected detection, shared library architecture Nice to Have • NoSQL databases — single-table design patterns, global replication, • RegTech, FinTech, or compliance domain experience, • Enterprise authentication providers — SSO, OIDC, SAML, directory sync, JWKS validation, • Real-time streaming — server-push patterns for live data delivery, • Workflow graph interpretation — topological sorting, branching logic, loop execution, • DSL Based Workflow Orchestration - Working with YAML/JSON-based domain-specific language allows the definition of workflows declaratively. What We Offer • Shape Our Future, Together: You'll be one of the earliest engineering hires. You'll have a direct hand in shaping not just the product, but how we build software and what kind of engineering team we become., • Build the Engine, Not the Features: Your work empowers product teams and customers to move fast. You're building capabilities and tooling, not grinding through feature tickets. It's platform engineering with real leverage., • Technical Depth: Multi-region infrastructure, durable workflow execution, AI agent orchestration, and a data architecture with real complexity. The problems here are interesting and the codebase is well-structured., • Flexible Hours: We have core hours for alignment, but we trust you to manage your time. Get the work done, pick the schedule that works for you., • Unlimited PTO: Take what you need to stay sharp and healthy. We trust you., • Direct Impact: In a small team, your work ships and matters immediately. You'll see the results of your contributions every day., • A Culture of Trust and Collaboration: Kanban-style workflow with minimal ceremony transitioning to full Agile / Scrum as we scale our team. Open and frequent communication, mutual respect, and a shared commitment to building something that matters. How to Apply Click apply and attach your CV. If you have a GitHub profile, side project, or writing that shows how you think about software, include it in your CV as we'd love to hear about it, but it's not required. Our process is a conversation about your experience, a practical technical discussion about real problems, and a short take-home exercise that reflects the kind of work you'd actually do here.

INTERNATIONAL RECRUITMENT & HR EXPERTS ACROSS THE PLASTICS, PACKAGING, SPECIALITY CHEMICALS, LIFE SCIENCES, BIOPOLYMER, FOOD ADDITIVES & INGREDIENTS, ENERGY AND RECYCLING SECTORS SINCE 1975. Manufacturing Process Engineer Site based Coles Hill, Birmingham The Company: A family owned and run extrusion company developing, manufacturing and selling industrial hose, pipes and ducting products based in the West Midlands. For the last 7 years the focus has been applying innovation and passion for quality to the current and future products required by the hose and ducting market. During this time it has grown by 250% and has a plan, supported by further investment, for growth both in the UK and International markets. All products are manufactured in the UK on 30 extruders with up to three on a line, with more being installed in 2026. The business is an engineering led company keen on new processes, capabilities and talent to help drive this innovation. Job Role: Reporting to the Technical Director the Manufacturing Process Engineer will be working on a variety of extrusion process improvements, new production lines and supporting new product trials. Having broad knowledge of the process and materials in PVC. The focus for the company is to improve process consistency to make higher performance products and reduce scrap whilst also introducing new processes with best practises. This role will be working with an experienced quality and technical team to develop our new training program, new tooling, setting sheets and 5S. Main responsibilities: Process Control: • Trial new materials and process improvements then test samples to scientifically assess benefits, • Reduce scrap by improving start-up procedures, tooling, training, • Make sure start-up checks and inspections are completed by setters and operators, • Check material processing recommendations are being followed using SOPs or setting sheets, • Assess extrusion stability from first principles and come up with improvements, • Create setting sheets for new products and trials, continuously improve them and monitor if jobs are run to them Knowledge and Expertise: • Professional qualification or high level of experience, • Expertise in extrusion is required, training will be given in house on how the company manufacture spiral and braided hoses, • Good understanding of extruders, extrusion heads and polymers from first principles, • Knowledge of extrusion tooling design, • Previously written shop floor documents and procedures, • Mixture of theory and hands on experience, • Proven experience in process and continuous improvement, • Strong track record of control and analysis and able to provide quantifiable examples of success in process improvements. The Person: • A passion for manufacturing and operational improvement, • Works well cross functionally with different cultures, • Resilience and adaptability, • Flexible as will be working between 2 sites in Kitts Green and Coleshill For reasons of better legibility, the simultaneous use of the language forms male, female and diverse (f/m/d) is avoided. All personal designations apply equally to all genders. For UK roles, candidates must be eligible to work and live in the United Kingdom. Proof of eligibility will be required with your application. To apply please contact Jason Hutchison 0044 (0) 1789 207070 Why select Listgrove? · Five Decades of Market Intelligence · Unrivalled Industry Networks · Recognised International brand · HR Qualified Professionals To hear from our clients on how we have supported their search for talent and HR needs, please visit Listgrove’s Case Studies page. Throughout 2026 & 2027 you can meet with Listgrove at the following exhibitions: Interpack, France Innovation Plasturgie, Interplas UK, Plast Milan, Fakuma, ArabPlast, NPE 2027. Performance through People. Please visit for more information on our services, global success and testimonials. Listgrove Limited Registered in England No: 01197713

MOBILE AIR CONDITIONING INTERMEDIATE SERVICE ENGINEER / IMPROVER People Solutions are currently recruiting for a Mobile Air Conditioning Intermediate Service Engineer / Improver to join our well-established client on a full-time, permanent basis, covering nationwide projects from the Midlands. This is a fantastic opportunity for a recently qualified engineer looking to develop their career in HVAC and air conditioning, with excellent support, training, and a company vehicle provided. Shifts - Flexible to meet customer requirements Check all associated application documentation thoroughly before clicking on the apply button at the bottom of this description. - 39 hours per week - Overtime available at time and a half Salary - Circa £30,000 per annum (depending on experience) Benefits As a Mobile Air Conditioning Intermediate Service Engineer / Improver, you will receive: - Competitive salary with company bonus scheme - Company van for business use - Overtime opportunities - Door-to-door pay - Career progression with ongoing training - Basic disclosure certificate funded by the company Day-to-Day Duties As a Mobile Air Conditioning Intermediate Service Engineer / Improver, your duties will include (but are not limited to): - Servicing and maintaining air conditioning systems and chillers - Carrying out planned preventative maintenance across client sites - Attending reactive call-outs as part of a call-out rota - Supporting on-site installation and refurbishment of equipment as required - Providing training and on-site support with water chillers Essential Skills To be successful as a Mobile Air Conditioning Intermediate Service Engineer / Improver, you will need: - Refrigeration and air conditioning knowledge - Familiarity with split type AC, VRV, and VRF systems - F Gas qualification - C&G 6090 NVQ Level 2/3 or equivalent - Full UK driving licence - Basic knowledge of control systems (Trend, Siemens, Carel, etc.) - Construction Skills Certification Scheme (CSCS) card Desirable Experience - Basic electrical knowledge - Experience with communication devices and control systems - Previous exposure to nationwide site works and out-of-hours support Training Provided - Industry-specific training and ongoing support to develop toward a senior Service Engineer role Apply If you are ready to take on this opportunity as a Mobile Air Conditioning Intermediate Service Engineer / Improver, apply today and a member of our recruitment team will be in touch. xrnqpay People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process.

You will join us as a Plant Engineer who will support the Site Manager with the safe operation of the site, Planned Preventative Maintenance (PPM) System, planned down time of key equipment for planned, safe and cost effective overhaul. If you want to know about the requirements for this role, read on for all the relevant information. Plant Engineer Requirements The successful candidate will be qualified in electrical or mechanical engineering, ideally with experience from a related process industry. Experience in engineering, PLC controls or electronics would also be an advantage. You will ideally hold a qualification or possess experience in materials handling, confined spaces, working at heights and first aid. Training will be provided to achieve in house WAMITAB competency standards and NEBOSH, if these are not already held. You will have the ability to follow procedure and protocol, experience of cost control and working within budget and adapt to changing circumstances effectively. Be self-motivated, flexible and a great team player but also confident to work on your own. It is desirable that you have experience of environmental, safety and quality management systems. Experience of working with planned preventive maintenance systems is also essential for this position. Due to the nature of the role a full UK driving licence is required. You will have the ability to operate a telehandler and obtain a telehandler licence. The role will work a shift pattern including weekends on a rota basis, call out and remote monitoring of the AD Process. Overtime is paid for approved additional hours worked. About Biogen (UK) Ltd Biogen is the UKs leader in anaerobic digestion (AD) and one of the largest independent AD operators in the UK. Having expanded its food waste recycling network through acquisition, it has a combined network of nineteen AD plants located across England, Scotland and Wales that provide cost-effective, low carbon, food and organic waste management solutions. xrnqpay Working with supermarkets, the hospitality industry, food manufacturers and local authorities across the UK, the AD sites recycle over half a million tonnes of food waste each year. Location:Biogen Westwood, Bedford Road, Rushden NN10 0SQ Job type: Full Time, permanent, 40 hours per week Salary: up to £40,000 per annum dependent on experience + allowance + overtime + bonus Benefits: 25 days holiday + bank holidays , 4% employer pension and x4 life assurance You may have experience of the following: Plant Engineer, Plant Engineer, Electrical Engineer, Mechanical Engineer, Electrical Engineering, Mechanical Engineering, Engineer, Plant Maintenance Engineer, Plant Engineering, Maintenance Engineer, Maintenance Engineering etc. REF-227 839

We are working with one of the largest international independent manufacturers of metallic aerospace detailed parts. Capabilities include Machining, Assembly, Inspection & Control, Integrated Logistics, Processing & Finishing, Sheet Metal & Fabrication, Speed Shop, Engineering. They are looking for a Group Technical Quality Engineer to add to the team. Group Technical Quality Engineer Permanent £50,000 per annum Monday - Thursday 07:30 – 16:00, Friday 07:30 – 12:30 Hybrid/Remote/Site Based Group Technical Quality Engineer Job Description • Act as internal focal point of contact, and support the central quality teams (group) as well as sites, in an expert role for escalated technical questions, queries and issues (within the assigned scope), • Support all sites with specialist knowledge on deployment of APQP deliverables, and support identification and deployment of APQP training to all group sites., • Work closely with manufacturing engineering to continuously improve planning and inspection processes to share, embed and flow down best practices across the group, • Support activities within the group (and across the sites) to maintain NADCAP and (customer) process approvals, including supporting site teams with NADCAP preparation audits, • Conduct internal process audits to support identification of improvement areas, • Support with the effective implementation of corrective and continuous improvement actions, • Support all ToW and NPI projects in the area of expertise, • Support the inspection team with technical queries and standardised approach. Group Technical Quality Engineer Essential Experience/Skills/Qualifications • Quality or Manufacturing Engineering Professional with extensive experience in a similar role, • Experience in deployment of APQP deliverables, • Working knowledge of international standards for quality management systems (AS9100, ISO9001), • Highly proficient in reading, understanding and applying technical documentation such as drawings, technical specifications, standards etc., • Experience in manufacturing processes for sheet metal and machined components, including surface treatment processes, • Proficient in developing and improving planning (routing) and supporting documentation., • Experience in a highly regulated industry, preferably Aerospace, • Strong knowledge of problem analysis methodologies & working experience with ERP systems. Group Technical Quality Engineer Company Benefits • Hybrid Working, • Company pension scheme, • 25 days annual leave + 8 statutory holidays, Christmas shutdown, • BUPA Healthcare, • Death in Service benefit If you feel you’re a good fit for this position, please click ‘apply’

Principal Electrical Design Engineer Location: North Bristol (hybrid – 3 days onsite per week) Salary: up to £70,000 pa + benefits Our client is a prestigious global high technology business based in North Bristol As a Principal Design Engineer, you will play a pivotal role in the development and delivery of delivery of their electrical engineering products. The Role: • Act as a recognised technical leader, upholding company and industry (e.g. EN) standards and promoting professional best practices., • Collaborate across teams to ensure clear specifications and translate requirements into structured, modular designs., • Produce and manage technical documentation, while liaising with subcontractors and conducting supplier/site visits as needed., • Drive continuous improvement through design tool development, process enhancements, and supporting departmental operations. Skills/ Experience Required: • Experience within a similar senior Electrical Design Engineer role, ideally with experience of designing machine control systems, • AutoCAD Electrical, • Strong communication skills, • High level of stakeholder management, • Able to take a lead on projects, mentor junior members of the team Please note, no sponsorship available. However, there are some relocation support options for anyone looking to relocate to Bristol area. Contact David Southwood – CPS Group UK

Job Title: Senior Completions Engineer Job Location: Sunbury-on-Thames OR Aberdeen (Hybrid) Contract Length: 12 Months Industry: Oil and Energy, Wells Working Hours: 8 per day/40 per week Role Overview: Join bp’s wells organization and help shape the future of well reliability and field development. In this role, you will lead and deliver completion design projects with global impact, support implementation and mentor other engineers. You’ll work with teams worldwide to apply the safe and commercial viable designs, knowledge and tools to current and future projects. This is an opportunity to leverage your deep understanding of well design and operations across different regions. You’ll gain global experience, broaden your expertise and make a real difference to the reliability of our wells. What you will do: • Support implementation and share best practices., • Mentor engineers and help develop their skills., • Collaborate with regional teams to deliver reliable wells., • Lead completion design and operations programs in the well delivery workflow for well-specific designs where a BoD does not exist., • Lead or support design projects with global reach, working with suppliers on qualification testing and system integration tests (SITs) to deliver new completion designs., • Provide execution support to implement new designs in collaboration with the well integrity and reliability team, advisors and regional wells teams., • Provide global leadership in sand control design and knowledge, including continuous improvement efforts, design support and operations support where needed., • Work with regions to define long-term design and technology needs, including support for ADP refresh hopper projects., • Develop design solutions for all regions and document them in the field-wide completions basis of design (BoD) for upper and lower completions. Revise existing field-wide completions BoDs to maintain the standardization agenda led by the central team., • Lead completion design for the Concept Select, Optimize and Define stages of the major projects common process (MPCP) for all new major projects. Include BoD and collaborate with subsurface teams for well productivity input. What you will have: • Experience in design, execution and analysis of cased and/or openhole gravel packs (planning, operations and tool systems), • WellCat, Prosper, PackPro, software (GAP, Reveal is also helpful but not mandatory), • Experience with designing/conducting SITs, equipment assurance, and fluid chemistry & proppant testing, • Experience in Well Installation/Rig operations, • Experience in Major Projects Common Process(MPCP), • Competency in Completions BoD development We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.

Technical Services Manager £65,000, Mobile, National role. General Overview: Overall leadership of the provision of Technical Services including Mechanical, Electrical and HVAC Plant and equipment providing contractual and legal compliance, improving operational performance and energy efficiency. Provide Engineering Support to Facilities Managers. Be a Point of Contact for Account Management Teams for technical support and advice including best practice. Key Responsibilities • Maintain a PPM schedule that meets contractual and legal obligations based on SFG20 Guidelines and Manufacturers recommendations, • Support and advice Facilities Manager in the control of PPM activities., • Support and advice Facilities Manager in the management of remedial works o Quantify corrective actions o Validate Quotes o Review Method Statements o Provide support to FM through the duration of works • Manage and implement the Safe System of Works o Authorising Person for Electrical Works o Training and assessment of Competent Persons and Site Responsible Persons o Support FMs in management of SSoW and RAMS. • Lead and motivate the engineering team to improve performance on customer service, communication, networking, common engineering standards, quality, safety and environmental issues to ensure compliance with statutory, regulatory / corporate requirements and that documented procedures exist and are understood by all employees., • Lead the engineering team to deliver a safe, compliant, cost effective and responsive service, • Working with the engineering team to provide an efficient / cost effective management of all Suppliers which includes; lifts, building management controls and fire systems, • Contribute to plans and strategies for the future development of facilities., • Maximise the utilisation of the Technical Services team through training and coaching in order to minimise plant downtime and reliance on sub contractors., • Establish and maintain excellent working relationships based on open and honest communication with suppliers to ensure confidence in our business and to present a credible and professional image., • Ensure all work is carried out on all sites to an acceptable level and to consistent engineering and H & S standards through regular monitoring of both in-house and contractor performance and competence., • Develop, manage and co-ordinate a process to continually review Service Suppliers. Professional and personal competencies/qualifications Qualifications • Recognised qualification in an appropriate engineering subject., • Appointed Authorising Engineer or Authorised Persons for M&E disciplines., • Member of an appropriate technical institution (IET, CIBSE). Experience • Knowledge of building services/utilities, energy utilisation and procurement, business planning, and financial/budgetary controls, • 5 - 10 years experience of managing at a senior level a multi-disciplinary service to a complex facility incorporating maintenance and engineering., • Proven track record of achievement in a commercial, client-facing role., • Demonstrates experience of co-coordinating and managing Technical Services and good awareness of fit-out and H & S issues., • Ability to explore a situation, assess pro’s and con’s of different options and formulate a plan to meet objectives., • Able to think on their feet and change their approach as required., • Experience of formulating, implementing and managing change management programmes

About Plessey We’re building the hardware foundation for next-era computing. Plessey is a world-leading technology company driving the next generation of photonic devices and systems. With over 70 years of innovation, we combine research, materials science, process engineering, and manufacturing under one roof. We’re recognised as a global authority in microLED displays, optical computing, and optical interconnects. Join us to work on breakthrough technologies shaping the future of light-based technology and computing. Lead We don’t follow industry trends; we create them, pushing boundaries and setting standards others aspire to. Every team member has the power to make decisions, drive change, and deliver excellence. We support each other, challenge one another for the best solutions, and lead by example. Together, we build industries and technologies that shape the future and scale toward our vision of the next era of computing. Grow We expand our capabilities every day — deepening our expertise, improving how we work, and pushing the boundaries of what’s possible. Curiosity fuels us: we question assumptions, explore new ideas, and innovate with light-based technologies. By investing in and empowering our people, we strengthen Plessey’s impact and help shape the future of optical technology. Trust We operate like a family—honest, reliable, and supportive. We have each other’s backs, own our actions, and uphold the highest standards of integrity and safety. We trust each other to deliver, our customers to challenge us, and our expertise to guide the way. Together, trust enables the collaboration essential for breakthrough innovation and lasting impact. Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are looking for an experienced Test Development Engineer to join our team. In this role, you will work with advanced test equipment, including Teradyne UltraFLEX and J750 systems, helping to develop and improve innovative testing solutions. If you are passionate about test development, enjoy solving complex problems, and want to work with cutting-edge technology, we would love to hear from you. Key Responsibilities • Implement and maintain digital and mixed-signal test solutions., • Specify hardware required for testing such as probecards, interface boards etc., • Develop and optimise test programs for complex devices using Teradyne Ultraflex and J750 systems., • Perform test program, Test HW characterization over temperature (Ex. Shmoo analysis), GRR, Correlation, setup calibration and product qualification., • Drive and perform the Repeatability and Reproducibility Studies which are necessary to transfer a test solution from an in-house development site or from other development sites to a full manufacturing high volume setup., • Define and release procedures for all aspects of test program development (e.g. test program release, test coding guidelines etc)., • Release and support test programs for production., • Collaborate with key stakeholders to ensure on time delivery test coverage and quality., • Work with stakeholders to identify and implement test process improvements. Skills, Knowledge and Expertise • Strong programming skills (IGXL, VBT, Python)., • Significant experience with Teradyne Ultraflex and J750 systems., • Understanding of digital and analog test principles ., • Problem-solving and analytical skills ., • Experience with GRR and test program release processes including data analysis software (eg. JMP, Examinator). Advantage • Mixed-signal testing expertise., • uLED and /or display panel testing expertise., • Knowledge of Teradyne IRIS100S system., • Knowledge of semiconductor manufacturing and test flows., • Knowledge of TEL probers., • Expertise with test program control such as git.

MS647 - Site Services Engineer Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Location: Anwick Salary: £50,000 - £52,000 per annum Overview: First Military Recruitment are currently seeking a Site Services Engineer on behalf of one of our clients. This includes the maintenance and operation of critical site infrastructure such as boilers, refrigeration, utility supplies, air compressors, air handling systems, pipework and effluent plant. The role also supports factory start-ups and ensures engineering standards are upheld. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: • Participate constructively as a member of the department keeping everyone informed and proactively share your knowledge and expertise within the time., • Apply lean thinking techniques to ensure the productive capability of the plant is optimised and improved thus demonstrating commitment towards achieving factory targets, including prompt start up times., • Work with site personnel and commissioning engineers to ensure required process skills training is performed for all new equipment., • Contribute to that department/ add value by developing requisite skills in this area in line with MP competency framework., • Operation and maintenance of steam boilers, refrigeration systems, fluid transfer systems, heating systems, hot and cold-water systems and effluent treatment systems., • Working with Mechanical Drive Systems, Hydraulics, Pneumatics and electrics., • Preventative Maintenance., • Pipefitting., • Portable appliance testing., • Emergency Light Testing., • To Maintain general good repair of site fabrication and general services., • Attention to detail., • Apprentice trained to NVQ level 3 minimum., • The ability to plan and organise workload methodically to best effect., • Full Driving Licence., • Able to work on own initiative., • Confidence to recommend machine improvements., • Be achievement and career focussed. xrnqpay, • Have the ability to work in a pressurised environment., • Strong communication, influencing, planning and organising skills

Our OEM Client based in Gaydon, is searching for a Senior Axle Function & Integration Engineer to join their team, Inside IR35. This is a maternity cover contract position with a proposed end date of 31st March 2027. Like the look of this opportunity Make sure to apply fast, as a high volume of applications is expected Scroll down to read the complete job description. Umbrella Pay Rate: £33.64 per hour. Duties: Reporting to the Axle Function & Integration Chapter Leader, this role requires an individual to lead the delivery of the design of the suspension/axle concept and associated CAD geometry to meet the agreed timing for multiple nameplates off a platform. Key Accountabilities and Responsibilities: • Lead the development of the Axle CAD concept and integration of corner modules and axle links into subframes and rest of vehicle for all vehicles across a platform., • Support of Axle Integration Engineers, organising workload to complete programme deliverables. Provide daily support with technical direction, methods and processes., • Work together to plan out tasks, training and career development experiences where appropriate., • Create suspension layout studies and check packaging including consideration of kinematics, dynamic envelopes (e.g. wheel envelope), compliances, tuning and component variability., • Generate suspension hard point datasheets for release, plus selected other chassis geometry datasheets (e.g. anti-roll bar routing) and cascade these to all relevant areas of the business., • Generate and complete the DVP for suspension assemblies for the requirements that depend on CAD as the validation tool (for example clearance checks)., • Mechanical Engineering based degree (MEng, BEng, MSc or BSc) or equivalent experience., • Experienced user of Catia v6 (Dassault Systèmes 3DEXPERIENCE) with a working knowledge of kinematics., • Knowledge of suspension design fundamentals, suspension packaging & functional requirements., • High levels of personal organisation, driven, self-motivated and able to deliver with minimum supervision., • Excellent problem-solving, communication and interpersonal skills, with strong influencing and engagement skills., • The ability to manage and resolve complex, cross functional, technical issues when confronted with conflicting requirements within project timing constraints., • Good working knowledge of Axle System Targets and Attribute Interaction., • Understanding of whole vehicle packaging., • Understanding of Associative Vehicle Architecture modelling principles., • A good working knowledge of product creation & delivery, change control, product definition and change management processes., • Mechanical Engineering based degree (MEng, BEng, MSc or BSc) or equivalent experience.

Lead DevOps Engineer Pay up to £92,522 plus 28.97% employer pension contributions, hybrid working, flexible hours, and great work life balance. This is a real and significant DevOps leadership role in the UK's largest government department. Here you will have the freedom and autonomy to drive the development of our technical landscape and define what DevOps looks like in DWP DWP. Digital with Purpose. We're looking for someone who has the vision to lead multiple teams through the adoption of cutting-edge infrastructure and development technologies. You'll be a leading, expert voice in a DWP Digital community that is driving a once-in-a-generation transformation of public services. We have a unique purpose - putting better, more efficient services in the hands of DWP users. The scale of our engineering challenge is also huge: We have 1bn lines of code in over 12,000 code repos and 90+ programming languages. We run around 294 days' worth of testing every day through automation. Our APIs receive 173 million requests, and we spin up 280,000 AWS servers every month. Over 22 million people - 1/3 of the UK's adult population access our services daily. Over 100,000 colleagues and agents use the kit, tools and systems we roll out. We build and maintain systems behind payments worth over £195bn payments annually. What skills, knowledge and experience will you need? Experience of leading and supporting Engineers in multi-disciplinary teams in an agile environment and sharing knowledge and good practice with the wider organisation. Significant experience of version control systems as well as building and maintaining CI/CD pipelines e.g. git with GitLab CI or Jenkins. Significant experience of Infrastructure-as-code and configuration of code for one or more cloud providers. Experience of containerisation and container orchestration. Experience of multiple scripting and/or programming languages (e.g. Bash, Python). Significant experience of the full life cycle of Azure cloud-based platforms and applications from designing, through deployment to supporting and operating in production, test and development environments. You and your role Our Lead DevOps Engineers lead and set the strategy as well as build our products and applications with researchers, testers, architects, analysts and designers as part of multi-functional agile delivery teams. You'll also be part of a supportive Engineering community of practice, with hundreds of engineering experts from across the UK, united by passion and purpose. We'll give you the tools and time to build your capability, with coaching, mentoring, qualifications and formal learning, meet-ups or whatever else works for you. Details. Wages. Perks. Location: You'll join us in one of our brilliant digital hubs in Birmingham. Blackpool, Leeds, Manchester, Newcastle or Sheffield, whichever is most convenient for you. Hybrid Working: We work a hybrid model - you'll spend some time working at home and some time collaborating face to face in a hub. Pay: We offer competitive pay of up to £92,522. Pension: You'll get a brilliant civil service pension with employer contributions worth 28.97%, worth over £21,000 per year. Holidays: A generous leave package starting at 26 days rising to 31 days over time. You can also take up to 3 extra days off a month on flexi-time. You'll also get all the usual public holidays. We have a broad benefits package built around your work-life balance which includes: Flexible working including flexible hours and flex-friendly policies Time off volunteering and charitable giving Bring your authentic self to work with 'I Can Be Me in DWP' Discounts and savings on shopping, fun days out and more Interest-free loans to buy a bike or a season ticket, so it's even easier for you to get to work and start making a difference Professional development, coaching, mentoring and career progression opportunities. And we have an award-winning environment and culture: DWP have been recognised as 2024 Diversity Employer of the Year at the Computing Women in Tech Excellence awards Diverse and Inclusive Leadership at Digital Leaders Awards 2024 Commended as Best Place to Work in Digital category in the Computing Digital Technology Leaders awards 2025 Recognised as one of the Best Public Sector Employers at 2025 Women In Tech Employer Awards Process: We know your time is valuable, so our application and selection process are just three stages: Apply: complete your application on Civil Service Jobs. There'll be full instructions when you click through. Presentation: A short 10 minute presentation on how you would mature a DevOps culture across multiple multidisciplinary teams. Interview: a single stage interview online. CLICK APPLY for more information and to start your application. TPBN1_UKTJ

ABOUT YOU Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. As the Certification Engineer, you will have strong analytical skills, enabling you to review technical documentation, make sound engineering judgements, and support certification decisions. Organised and detail-oriented, you can manage multiple projects while collaborating effectively with colleagues and clients. Required skills and experience: • Degree in electrical engineering or equivalent in terms of education, experience, or training., • Experience in testing and/or certification of electrical products., • Experience with switchgear and control gear products and standards (IEC 61439 series)., • Ability to make sound engineering judgements based on relevant professional experience., • Ability to scrutinise and compare technical documents., • Good IT literacy skills (Microsoft Office). ABOUT THE OPPORTUNITY As the Certification Engineer you will help coordinate the company's product certification activities and take an active role in the product certification process for our ASTA certification schemes. Key activities: • Conducting certification activities (Recommendation and Certification Decision) for all schemes., • Preparation, review and authorisation of test programmes., • Creation and checking of certificates and technical reports., • Assessment of laboratories to ISO 17025 and Intertek Requirements., • Witnessing of testing activities undertaken as part of the ASTA schemes., • Processing and management of enquiries, quotations and orders for type testing and certification., • Regular monitoring of project status including discussions with colleagues in other offices., • Supporting of sales teams to progress the technical aspects of the sales process., • Liaising with clients, including the development of professional relationships and providing technical support., • Undertaking project work primarily for products within the IEC 61439 series of standards. WHAT WE OFFER Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace, and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world. • Competitive salary/benefits, • Development and career opportunities around the Globe, • Working in a highly motivated team and dynamic working environment We are an Equal Opportunity Employer who do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin. xrnqpay Intertek operates a preferred supplier arrangement, and we do not accept unsolicited approaches from agencies.

Quality Manager About the business Our client is a well-established West Midlands manufacturer and distributor of specialist safety equipment, supplying trade and commercial customers across the UK. They're a close-knit, hands-on SME with a strong culture and a stable, long-tenured team. Due to the planned retirement of their current quality professional, they're now looking for the right person to take full ownership of the quality function. Summary of the Quality Manager Role This is a full-time, permanent position with genuine autonomy. You'll inherit a well-maintained, fully functional ISO 9001 QMS and be trusted to run it, develop it, and put your own stamp on it. Reporting directly to the MD, you'll be the sole quality resource — working closely with production supervisors and the workshop manager to drive quality standards from the shop floor up. There is also a clear growth path, with the business planning to pursue an additional product standard in the near future — giving the right candidate a significant compliance project to lead. Key responsibilities of the Quality Manager Maintain and continuously improve the ISO 9001 QMS Manage all quality documentation, version control, and process changes Conduct regular floor-level quality inspections across production Lead internal audits and manage external certification audits Investigate and resolve non-conformances Chair and prepare materials for management review meetings Manage product compliance — CE marking and UKCA certification Oversee IP testing and liaise with external test houses Maintain environmental compliance records (WEEE, ERP packaging returns) Support future implementation of an additional product standard The Quality Manager we're looking for Proven experience managing an ISO 9001 QMS in a manufacturing environment Confident conducting quality inspections and driving corrective actions Experienced in internal and external auditing Familiar with CE marking, UKCA, and product compliance processes An influencer, not an enforcer — someone who takes people with them Comfortable as a sole quality professional in a busy SME Sector-specific experience is a bonus, not a requirement — manufacturing quality backgrounds are very welcome Additional Information • Position is on site • 40 hour weeks with flexibility on how those hours are worked • 25 days holiday allowance This Quality Manager role would suit someone who enjoys being hands-on in a manufacturing environment, taking full ownership of quality, and working closely with production teams to maintain and improve standards. Key Words: Quality Manager, QA Manager, Quality & Compliance Manager, Quality Lead, Senior Quality Engineer, Quality Engineer INDL TPBN1_UKTJ

A manufacturing solutions provider is seeking a Quality Assurance Engineer in Birmingham.The ideal candidate will have a strong background in metal machining, quality control systems, and continuous improvement.Responsibilities include product inspection, process monitoring, and cross-functional col

Manufacturing Engineer Salary: Dependent on experience Location: Birmingham, UK Contract: Permanent Role Summary The Manufacturing Engineer will provide full engineering and technical support across the manufacturing department to help ensure production operating levels are achieved and maintained. This Manufacturing Engineer position will also support internal projects, process improvements, documentation control, and new product introduction activity within a fast-paced manufacturing environment. Role & Responsibilities Provide engineering and technical support across manufacturing to maintain production performance and support business objectives. Manage internal projects within agreed timeframes and budgets. Produce and maintain clear internal documentation to company standards. Generate, develop and update PCPs, VCPs, TCPs, FMEAs and SOPs. Design and develop lean manufacturing cells based on process needs, including assembly and test equipment. Support the design and development of assembly and testing fixtures, liaising with internal teams where required. Identify and lead cost reduction and process efficiency improvement activities. Support prototype builds and ensure special requirements are achieved within agreed timescales. Support NPI activities and implement improvement opportunities. Use statistical tools to validate new or changed processes and equipment as part of the Manufacturing Engineer remit. Specify and purchase production facilities, working with relevant internal departments to achieve best value. Requirements of the Role HNC, HND or Degree level qualification in Mechanical or Manufacturing Engineering. Proven experience working in a fast-paced manufacturing environment. Experience managing projects to time and budget. Strong working knowledge of 3D CAD systems, with Creo advantageous. Working knowledge of hydraulics and/or pneumatics would be advantageous. Good understanding and practical application of lean principles, including Kaizen, 5S and Kanban. Strong analytical and problem-solving skills. Computer literate with sound knowledge of Microsoft packages. Familiarity with ISO 9001, with ISO 14001 knowledge advantageous. AutoCAD or Pro-E / Creo experience. Previous experience as a Manufacturing Engineer in a production-led environment. Apply Now If you have the skills and experience required for this Manufacturing Engineer opportunity, please apply now

Field Service Engineer Electrical / Electronics & Mechanical Location: Shropshire / Black Country / Midlands / Central Package: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care Join a leading Class A OEM that design, develop, and manufacture world-class Precision Machine Tools for the entire manufacturing sector. As technology advances rapidly, we have an exciting field based opportunity for a highly skilled Electrically Biased Electro-Mechanical, Field Service Engineer to fix / repair, service, maintain and carry out overhaul projects on new and pre-loved precision machine tools. What We're Looking For: Electrical fault-finding expertise - Big plus Proficiency in reading schematic drawings Strong IT skills (networking, fault-finding) Understanding of mechanical components and machinery Experience in finding route cause problems covering both electrical and mechanical issues Grasp ofPLC controls and control functionalities Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity Desired Skills: PLC knowledge / experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB) 3 -Phase expertise and navigating High Voltage industrial systems Electrically qualified Understanding of Mechanical Applications and work with Mechanical Machinery Soft Skills: Can-do attitude Precise attention to detail Problem-solving expertise for complex issues Here's the future vision…. Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business. Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering! Meet the employer: Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. Please get in touch via CV submission & arrange your pre-interview session NOW: Tel (phone number removed) / JOB REF: 4312GSB Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know - we're here to support you

Position: Maintenance Shift Engineer Location: Birmingham, West Midlands Salary: £50,000 + £5,000 shift allowance TXM Recruit is partnering with a prominent automation and intralogistics company to a hire skilled Maintenance Engineer for their new site in Birmingham, West Mids. The role involves maintaining and optimizing state-of-the-art machinery to ensure seamless operations at the distribution facility. Your role will be privitol in ensuring the systems are working at optimum performance during the installation and commissioning phase and moving through its initial opening and operations. Shift Pattern: Panama schedule (2, 2, 3) Rotating every 2 weeks between days and nights (6am - 6pm and 6pm - 6am) Key Responsibilities: Perform mechanical disassembly and reassembly tasks, basic field wiring, equipment calibration, and system testing. Efficiently manage time using CMMS, aiming for over 90% utilization. Complete reactive repairs within set timeframes to minimize downtime. Conduct servicing and repairs of installed products, taking hands-on ownership of issues to achieve swift resolutions. Interpret electrical schematics and work confidently with 415V motor controls. Prioritize health and safety by conducting thorough risk assessments. Demonstrate strong mechanical skills, including the ability to read and follow assembly drawings. Follow setup instructions, assembly guides, and checklists with precision. Display exceptional attention to detail and follow-up capabilities. Understand and work with control systems. Communicate clearly and effectively with stakeholders at all levels within the organization and customer environments. Skills and Qualifications Required: Qualification at NVQ/BTEC/C&G Level 3 in Electro-Mechanical Engineering or a related field. Familiarity with Non-Destructive Testing (NDT) methods and technologies. Knowledge of PLC systems and their functionality. Experience with pneumatics and hydraulics is an advantage. Proficiency in basic Microsoft Office applications. Experience using CMMS systems and managing engineering inventory. A qualification equivalent to HNC/HND is preferred but not essential. Desirable Attributes: Mechanical aptitude, including the ability to disassemble and reassemble equipment using technical diagrams. Familiarity with 415V motor controls and understanding of PLC systems. Awareness of health and safety standards, including conducting risk assessments. Customer-oriented approach with effective communication skills to interact with stakeholders at all levels. Willingness to learn, adapt, and participate in training programs, including potential travel within Europe. Benefits: Employer pension contributions of up to 6%. Comprehensive private healthcare coverage, including optical, dental, and hearing benefits. Life insurance for added financial security. Health care cashback scheme, covering private medical excess costs. Access to a benefits portal offering lifestyle discounts and training resources. Employee assistance program for personal and professional support. Ride-to-Work scheme to promote sustainable commuting. Referral program with rewards for recommending new hires. Employee of the Quarter awards to recognize outstanding contributions. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection process due to disability or long-term health condition, we will do our best to assist you . INDUK TPBN1_UKTJ

NW32888 Site Design Coordinator £300 - £400 p/d (Outside IR35) Walsall or Teeside Alecto Recruitment is proudly partnering with a global leader in the Waste to Energy sector. Together, we are looking to recruit a Site Design Coordinator to support the civil works across major infrastructure projects. Role and Responsibilities: Take charge of coordinating all civil works design deliverables, working hand-in-hand with our Lead Engineer to keep everything aligned and moving. Make sure every element of the civil works meets contract, programme, budget, HSE, and quality targets-no exceptions. Control design interfaces between external consultants and our internal engineering teams, setting clear release schedules and tracking progress so nothing slips. Review and challenge design submissions to ensure constructability, flag risks early, and put forward smart, practical technical solutions. Represent the civil design function confidently in meetings, keeping communication sharp and stakeholders aligned. What You Bring A Bachelor's degree in Civil Engineering, Structural Engineering, or Architecture. Solid construction industry experience-Ideally worked across both consultancy and contractor sides. A strong track record in civil project management and design coordination on major civil, industrial, or plant developments. A solution-driven mindset backed by excellent communication, planning, organisation, and negotiation skills. A sound grasp of QA processes, strong English skills, and extra languages are an advantage. Ideally have previous experience in Power Generation, Process or Heavy industrial sectors such as Petrochemicals, Papermills or similar. INDW To apply for this role please send your CV or call Noah on (phone number removed) ext 218 for more information. Equally if this role would not be of interest to you but may be for a suitable friend or colleague, we can offer paid referral fees for successful placements

Murphy is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland, Canada and America, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; energy and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 4,000 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’ - directly delivering the people, plant and expertise needed to make projects a success. Visit (url removed) or follow us on LinkedIn, Facebook, Instagram and X: #MoretoMurphy A day in the life of a Murphy Senior Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Job Title: Quality Engineer Location: Dudley Borough Shift Patterns: Monday - Friday 40-hour week starts from 05:00am Are you ready to take the lead in driving quality excellence within a forward-thinking manufacturing environment? We're looking for a passionate and proactive Quality Engineer to join a growing business that's committed to delivering first-class standards across every stage of production. In this key role, you'll be instrumental in shaping a 'quality-first' culture - implementing processes, influencing continuous improvement, and using industry-standard tools to resolve issues and enhance performance. If you're motivated by making a measurable hands on impact, thrive on solving problems, and want to be part of a team that values precision, innovation, and high standards, this could be the perfect next step in your career. This position offers the next step into Quality Management for the right candidate. Brief Description of Job Duties Generating, controlling, monitoring, reporting, and reviewing quality data to identify and communicate trends. Head RCA teams in the identification and resolution of quality issues and concerns raised, using Quality tools such as 5 whys, 8D and corrective action tracking tools. Maintain communication of internal and external rejects to stakeholders Implementing process controls. Recording and control of internal and external rejects and their disposition. Conducting scrap and customer return reviews. Generation of quality documents such as quality alerts/sop etc. Upkeep of quality data and reporting to the business. Physical measurement, using basic inspection equipment such as verniers, height gauges etc. Audit processes across the business to ensure compliance to the process. Inputting data and compliance documentation into QMS. Drive targeted improvement to eliminate non-conformances. Controlling and tracking the effectiveness of improvements and corrective actions Identifying product, process, and manufacturing improvements. Reducing variability in casting quality through active pursuit of improvements to our quality system and process controls. Devise procedures to inspect and report quality issues and concerns. Manage Standard work documentation. Develop documentation to support the product development. Participate in customer audit visits and assessments.Requirements Proven technical foundry knowledge associated with production processes, foundry capabilities and controls for high integrity ductile iron. Ability to facilitate Lean / Root cause analysis projects. ITAF and ISO Awareness. To be considered for this permanent vacancy as a Quality Engineer please click "Apply" to be considered or please call (phone number removed) for more information. Oliver Rae is an Established Recruitment Business with offices based in Walsall and Halesowen. We supply Temporary and Permanent Staffing to a range of sectors. INDPERM

INTERNATIONAL RECRUITMENT & HR EXPERTS ACROSS THE PLASTICS, PACKAGING, SPECIALITY CHEMICALS, LIFE SCIENCES, BIOPOLYMER, FOOD ADDITIVES & INGREDIENTS, ENERGY AND RECYCLING SECTORS SINCE 1975. Process Improvement Engineering Specialist Based in West Midlands Job ref: JH /64609 The Company: A family owned and run company developing, manufacturing and selling industrial hose, pipes and ducting products based in the West Midlands. For the last 7 years the focus has been applying innovation and passion for quality to the current and future products required by the hose and ducting market. During this time it has grown by 250% and has a plan, supported by further investment, for growth both in the UK and International markets. All products are manufactured in the UK on 30 extruders with up to three on a line, with more being installed in 2026. The business is an engineering led company keen on new processes, capabilities and talent to help drive this innovation. Job Role: Reporting to the Technical Director the process engineer will be working on a variety of process improvements, new production lines and supporting new product trials. The focus for the company is to improve process consistency to make higher performance products and reduce scrap whilst also introducing new processes with best practises. This role will be working with an experienced quality and technical team to develop our new training program, new tooling, setting sheets and 5S. Main responsibilities: Process Control: · Trial new materials and process improvements then test samples to scientifically assess benefits · Reduce scrap by improving startup procedures, tooling, training · Make sure startup checks and inspections are completed by setters and operators · Check material processing recommendations are being followed using SOPs or setting sheets · Assess extrusion stability from first principles and come up with improvements · Create setting sheets for new products and trials, continuously improve them and monitor if jobs are run to them Training: · Create training programmes, SOPs, checks · Mentor trainees, sign them off on training levels · Flow charts for processes OEE: · Monitor and report on machine down time · Reduce machine downtime where possible Research and Development: · Research for new processes, standards or materials · Research and advise on new equipment for process control and material analysis Trials: · Monitor trial procedures · Make sure samples are tested, catalogued and despatched to the correct recipients Teamwork: · Collaborate with operations, quality, IT, maintenance, engineering and senior management to drive factory performance, new processes and improvement projects Knowledge and Expertise: · Professional qualification (degree or apprenticeship) or part-qualified with relevant experience · Experience in extrusion is required, training will be given in house on how the company manufacture spiral and braided hoses · Good understanding of extruders, extrusion heads and polymers from first principles · Knowledge of extrusion tooling design · Previously written shop floor documents and procedures · Mixture of theory and hands on experience · Proven experience in process and continuous improvement · Strong track record of control and analysis and able to provide quantifiable examples of success in process improvements. The Person: · A passion for manufacturing and operational improvement · Works well cross functionally with different cultures · Resilience and adaptability · Flexible as will be working between 2 sites in Kitts Green and Coleshill For reasons of better legibility, the simultaneous use of the language forms male, female and diverse (f/m/d) is avoided. All personal designations apply equally to all genders. For UK roles, candidates must be eligible to work and live in the United Kingdom. Proof of eligibility will be required with your application. Why select Listgrove? · Five Decades of Market Intelligence · Unrivalled Industry Networks · Recognised International brand · HR Qualified Professionals Throughout 2026 & 2027 you can meet with Listgrove at the following exhibitions: Interpack, France Innovation Plasturgie, Interplas UK, Plast Milan, Fakuma, ArabPlast, NPE 2027. Performance through People. Listgrove Limited Registered in England No: (phone number removed)

Process Improvement Engineer Near Coleshill, Birmingham c£45k - £50k neg dep exp + generous benefits Our client has been established for almost 40 years and are recognised market leaders in the design and development, manufacture and distribution of an impressive portfolio of solutions for supply throughout the world, and as a result of continued success and an ongoing programme of strategic growth for 2026 and beyond, are now looking to recruit an experienced, hands-on and proactive Process Improvement Engineer to complement their professional and successful manufacturing team. Based near Coleshill and reporting to the Manufacturing Design Engineering Manager, the Process Improvement Engineer will be responsible for identifying and implementing process improvements using methodologies including Lean and Six Sigma to enhance efficiency, reduce waste and improve quality, while fostering a culture of continuous improvement within the organization. Working within core values that include Quality, Innovation, care for the environment and global capability with a unique product portfolio, you will be passionate about all aspects of sustained continuous improvement and striving to meet and exceed company objectives, KPI's and metrics. Tasked with developing and implementing continuous improvement strategies in both manufacturing and company processes, you will collaborate with the engineering team to perform DMAIC activities to eliminate inefficiencies across the business and provide technical guidance to enhance production quality and efficiency. Responsible for monitoring and analysing KPI's to identify areas for improvement and taking corrective action where needed, you will drive Lean Manufacturing initiatives to optimise operations whilst fostering a culture of continuous improvement within the manufacturing team. Able to establish effective relationships with shift supervisors or process implementers to assess needs and objectives, you will provide direction to the manufacturing team, instilling best practice and lean principles with the ability to train and mentor colleagues in SOP's and new ways of working running kaizen events whilst ensuring adherence to health and safety regulations at all times. Other duties for the varied and challenging Process Improvement Engineer position will include (but not be limited to) managing projects through to implementation, delivering on time and within budget, improving factory floor layouts and optimising workflow and operator movement, and liaising with the Engineering team with specification procurement and the implementation of new plant & equipment, as well as re-visiting implemented changes to ensure results are sustained. It is envisaged that the successful candidate will have at least 5 years proven experience gained within a dedicated process improvement manufacturing environment and essentially skilled and qualified in various lean manufacturing processes and methodologies (Six Sigma, 5S, PDCA, Kaizen, Kanban etc), realistically qualified to HND level (or equivalent) in a relevant engineering discipline with experience of AutoCad and the MS suite of products. With excellent influencing and communication skills at all levels and the ability to diagnose and define problems, measure/collect and analyse data, determine root cause, select and implement solutions and control/sustain outcomes, you will be both results and data driven to improve and sustain change and thrive within a continuous improvement focussed environment and able to motivate others to be the same. Contact the Manufacturing Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Civil Engineer - Highways | birmingham | Competitive Salary + Package What's in it for you You will be joining as a Civil Engineer in a role that offers variety, flexibility, and the opportunity to work on impactful highways projects. You will benefit from a competitive salary (dependent on experience), strong benefits, and the chance to develop your career within a growing and supportive environment. About the company My client is a well-established organisation within the highways and infrastructure sector, driven by a clear vision to raise the standard of highway maintenance while promoting safety, innovation, and social value. You will be part of a team that is passionate, responsive, innovative, trustworthy, and respectful-where different working styles and perspectives are welcomed. The role and responsibilities As a Civil Engineer, you will play a key role in the planning, coordination, and delivery of highway projects, ensuring work is completed safely, efficiently, and to a high standard. You will be doing: ·Producing and reviewing permits to break ground to a high-quality standard ·Supporting quality assurance and quality control processes, ensuring standards are consistently met ·Ensuring Inspection Test Plans (ITPs) are in place and regularly reviewed ·Managing the MAR process and work specifications ·Issuing and controlling RAMS and permits ·Conducting Cat & Genny surveys and reviewing outputs ·Carrying out setting out activities on site ·Managing document control and project records Skills and experience required To succeed as a Civil Engineer, you will bring: ·Experience in highways, civil engineering, or drainage projects ·Strong understanding of CDM regulations and principal contractor duties ·Knowledge of National Highways specifications and expectations ·Excellent communication skills and the ability to work collaboratively ·A proactive approach with strong attention to detail Qualifications You will ideally have: ·CSCS Black or Gold Card ·SMSTS or SSSTS certification ·Full UK Driving Licence ·Awareness of Health and Safety legislation ·GCSE (or equivalent) Maths and English (Grade 4/C or above) Personal attributes As a Civil Engineer, you will demonstrate: ·Strong communication skills ·Ability to work independently and as part of a team ·Practical, hands-on approach ·High level of attention to detail Salary and benefits ·Competitive salary (dependent on experience) ·Generous holiday allowance ·Pension scheme ·Referral bonus scheme ·Death in service cover ·Access to online rewards platform (900+ retailers) ·Group income protection ·Working away allowance ·Uplift for night work Location and working pattern This Civil Engineer role is based in birmingham, offering a mix of site-based work and flexibility including opportunities to work from home. Next steps If this Civil Engineer opportunity aligns with your experience and career goals, please apply today to take the next step in your career. FOOTNOTE: If you feel that you are right for this role technically, but the salary, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways professionals keen to make their introductions for future months or years. Carrington West's Highways, Transport & Infrastructure division is the fastest growing in the country, our specialist team has a combined over 100+ years' experience in this market. Please call Jordan Townley at Carrington West on (phone number removed) or email (url removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third-party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us

Field Service Engineer Electrical / Electronics & Mechanical Location: Shropshire / Black Country / Midlands / Central Package: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care Join a leading Class A OEM that design, develop, and manufacture world-class Precision Machine Tools for the entire manufacturing sector. As technology advances rapidly, we have an exciting field based opportunity for a highly skilled Electrically Biased Electro-Mechanical, Field Service Engineer to fix / repair, service, maintain and carry out overhaul projects on new and pre-loved precision machine tools. What We're Looking For: • Electrical fault-finding expertise - Big plus * Proficiency in reading schematic drawings * Strong IT skills (networking, fault-finding) * Understanding of mechanical components and machinery * Experience in finding route cause problems covering both electrical and mechanical issues * Grasp ofPLC controls and control functionalities * Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity Desired Skills: • PLC knowledge / experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB) * 3 -Phase expertise and navigating High Voltage industrial systems * Electrically qualified * Understanding of Mechanical Applications and work with Mechanical Machinery Soft Skills: • Can-do attitude * Precise attention to detail * Problem-solving expertise for complex issues Here's the future vision…. Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business. Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering! Meet the employer: Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd. JOB REF: 4312GSB Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know - we're here to support you.

Job Title: Piling Engineer (Section engineer or Sub Agent level) Location: Birmingham (HS2 Project) Start Date: January Duration: 6-12 months Day Rate: £350–£400 per day (Ltd company) Role Overview We are seeking an experienced Piling Engineer to join our team on the HS2 project in Birmingham. This is a minimum 3-month contract role starting ASAP, with likelihood of running 1 year. The successful candidate will support piling operations on-site, ensuring all works are delivered safely, efficiently, and in accordance with project specifications. CFA piling experience is a must. Key Responsibilities Provide engineering support for daily piling activities, quality assurance, and record keeping. Work closely with the site team and subcontractors to ensure safe and effective execution of piling works. Monitor work progress and ensure compliance with design specifications and project standards. Produce and maintain accurate site documentation, method statements, and risk assessments. Conduct inspections, checks, and quality control measures throughout the piling process. Assist with temporary works coordination and ensure safe implementation of all temporary works on site. Communicate effectively with project managers, designers, and site supervisors. Requirements Degree or relevant qualification in Civil Engineering or a related discipline. Previous experience working as a Piling Engineer or in a similar geotechnical/ground engineering role. Strong setting-out skills and familiarity with GPS, total stations, and associated surveying equipment. Current CSCS card. Harness training certification. Temporary Works Supervisor (TWS) or Temporary Works Coordinator (TWC) qualification (highly desirable). Full understanding of health & safety practices within the piling and civil engineering sectors. Ability to work independently and manage daily engineering tasks on a busy site. Right to work in the UK. Able to operate on a Ltd company basis

Quality Engineer - High?Volume Manufacturing Location: Oldbury Salary: Circa £45,000 Are you an experienced Quality professional ready to take ownership of quality systems, continuous improvement, and customer assurance within a fast?paced manufacturing environment? Hawk 3 is delighted to be recruiting for a Quality Engineer to join a well?established organisation operating across multiple sites in the West Midlands. This is an exciting opportunity for someone who thrives in high?volume production, enjoys leading teams, and is confident driving quality standards, audits, and compliance across a diverse customer base. About the Role As the Quality Manager, you will be responsible for ensuring robust Quality Control and Quality Assurance across high?volume operations. You'll lead root cause analysis, drive continuous improvement, and manage the Quality Management System as the business progresses towards IATF and ISO 14001 accreditation. Key Responsibilities Quality Leadership Oversee Quality Control and Quality Assurance across high?volume manufacturing Lead daily review and analysis of Non?Conforming Product (NCP) Drive root cause analysis and continuous improvement initiatives Manage and develop the Quality Management System (QMS) Support progression towards IATF and ISO 14001 accreditation Process & Compliance Use quality tools and methodologies to improve processes Lead internal site audits (systems, process, product) Manage customer and external audits Support NPI and APQP documentation, including PPAP submissions Oversee quality management of both customers and suppliers Experience & Skills Required Essential 3-5 years' experience in Quality Engineering within an automotive environment Experience managing small teams in a manufacturing setting Strong understanding of ISO 9001 Knowledge of IATF (essential) and VDA 6.3 audit requirements Ability to read and interpret engineering drawings and specifications Understanding of inspection techniques for plastic mouldings Knowledge of Health & Safety and environmental procedures Attributes Strong initiative and problem?solving skills (Quality Core Tools) Excellent communication and time?management abilities Customer?focused approach Proficient with Microsoft Office (Outlook, Word, Excel) Benefits Opportunity to lead quality strategy across multiple sites Career development as the business progresses towards new standards Apply today through Hawk 3 Talent Solutions to find out more. If you would like to apply for the role of Quality Engineer then please email your CV to (url removed) or call Donna on (phone number removed).For a confidential discussion or to apply, contact Hawk 3 Talent Solutions today. Closing date is 31.04.2026 Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Production Process Engineer Near Coleshill, Birmingham to c£50k neg dep exp Our client has been established for almost 40 years and are recognised market leaders in the design and development, manufacture and distribution of an impressive portfolio of solutions for supply throughout the world, and as a result of continued success and an ongoing programme of strategic growth for 2026 and beyond, are now looking to recruit an experienced, hands-on and proactive Production Process Engineer to complement their highly successful manufacturing team. Reporting to the Manufacturing Engineering Manager and based near Coleshill, the Production Process Engineer will be responsible for developing, improving and sustaining manufacturing processes across cutting, pressing, tin plating and assembly operations and focused on improving Overall Equipment Effectiveness (OEE), driving Continuous Improvement (CI) initiatives, reducing scrap, improving throughput and ensuring robust operator training standards. Taking a lead role in the specification, procurement, installation and commissioning of new automated machinery and production line layouts, you will drive improvements in OEE across all manufacturing processes, analysing and improving manufacturing cycle times to increase throughput, leading scrap reduction initiatives using structured problem-solving methodologies, identifying and eliminating causes of downtime across cutting, pressing, plating and assembly operations and developing and sustaining CI initiatives aligned with company strategy. You will support quality improvement through process control, RCA and corrective actions and design, develop and optimise manufacturing layouts to improve flow, safety and efficiency, as well as leading procurement activities for new automated machinery including specification development, supplier selection, technical evaluation through to Installation and commissioning. After successful validation and performance sign-off you will develop and maintain standard operating procedures (SOPs) and process documentation and will ensure that robust operator training plans are developed, implemented and sustained, utilising data-driven methodologies to diagnose problems, collect and analyse data, implement solutions and sustain improvements. It is envisaged that the successful Production Process Engineer candidate will have at least 3 years' experience gained in a Production / Process Engineering role within a manufacturing arena and demonstrate proven experience in a metal processing environment (cutting, pressing, plating, assembly preferred). Realistically you will be qualified to at least HNC level or above in a relevant Manufacturing or Production Engineering discipline with strong knowledge of the MS suite of packages and experience with SAP or other ERP systems. You will additionally possess good experience in the use of 3D CAD and CAM (CREO Parametric preferred) and AutoCAD experience for layout design. Additionally you will possess experience of supporting automation projects and capital equipment procurement along with experience in Lean Manufacturing, Six Sigma or similar CI methodologies, with knowledge of OEE improvement tools and structured problem-solving techniques (8D, DMAIC, etc.) proving distinctly advantageous. Contact the Manufacturing Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to for further details

Electrical Engineer - Machine Build/Fitter/Service £30-40k + Overtime. Annual Bonus. Company Pension. Life Assurance West Midlands Ref: 25113 A well-established UK engineering company specialising in bespoke machinery and test systems is looking to recruit an Electrical Engineer to support electrical build, installation, and service activities. This role is suited to a practical, hands-on engineer with strong panel wiring and installation experience. Electrical Fitter & Wirer - The Role: Build and wiring of electrical panels and enclosures (low-voltage only) Electrical installation and machine wiring Electrical breakdown support and fault-finding Testing of panels to relevant standards Control and coordination of electrical build projects Supervision of electrical subcontractors on build projects Electrical installation work within the UK manufacturing facility Travel to UK customer sites for: Machine installations Breakdown and service support (occasional overnight stays or short-term working away from home may be required) Electrical Fitter & Wirer - The Person: Proven experience in panel build and electrical installation Ability to read and interpret electrical drawings and wiring diagrams Qualified to BS7671 – 18th Edition (2018 + Amendment 2) Methodical, accurate, and a good communicator Full UK Driving Licence required Experience in any of the following sectors would be beneficial but not essential: Motor drives Test rigs Coil processing equipment Package & Benefits: Salary: £30,000 – £40,000 (DOE) Overtime paid at time-and-a-half or double-time (dependent on hours/weekend work) Discretionary annual company bonus (£3,000 p.a.) 40-hour working week 24 days holiday + bank holidays Company pension scheme with employer contribution matching up to 5% Life assurance benefit of £30,000 This role would suit an Electrical Engineer or Panel Wirer looking for varied, project-based work, long-term stability, and the opportunity to work on bespoke machinery rather than repetitive production builds. Located in West Midlands, this role would be commutable from Telford, Wolverhampton, Halesowen, Stourbridge, South Birmingham and surrounding areas. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on our website where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information call Sarah Clarke AE1

Our Water consultancy client is seeking an Associate Director Water Civil Engineer to be based out of Bristol, Birmingham, Exeter or Cardiff offices on a permanent basis. You will be working within their Design & Advanced Technology Practice working with a talented, multi-disciplinary team delivering cutting edge, iconic projects to Water market clients such as Wessex Water, Welsh Water, Severn Trent Water, South West Water, Environment Agency, as well as other regional water authorities. The role offers hybrid working - 3 days working out of Bristol, Exeter, Cardiff, Swansea, Birmingham, or Derby offices. Responsibilities As an Associate Director Civil Water Engineer in the D&AT practice, the successful candidate would have the following responsibilities: Lead a team of Civil Water engineers for delivery of technical design work on complex multi-disciplinary projects following relevant national and project specific design codes and standards, and to high-quality levels in areas such as hydraulics, wastewater and clean water infrastructure, water reuse, pipelines and other disciplines. Lead on the development of project design deliverables for Civil Water aspects of complex multi-disciplinary projects and work with the project management team to successfully manage time and budgets to key project milestones and Responsible for managing production, reviewing, and approving technical deliverables such as design reports, drawings, calculations, and scopes of work. Provide Technical Leadership within discipline for the regional and national D&AT practice and influence D&AT Practice wide initiatives and recommend best practices to improve internal process and services. Grow, develop, and manage the Civil Water Engineering capabilities within the regional and/or nationally Work independently with guidance in only the most challenging situations. Exercise personal judgement to solve difficult problems where appropriate and provide guidance to junior team members. Advise client, operational, project, or service activities within project teams and wider D&AT Practice initiatives. Manage or collaborate on technical aspects of bid proposals. Support operational activities such as hiring, line management, business development, client management. Work closely with a multi-disciplinary team in the UK and overseas to deliver integrated design solutions. Skills/experience/qualifications A degree in Civil Water Engineering or equivalent. Chartered Civil Water Proven experience in leading large-scale Civil Water engineering design delivery for a design consultancy including within a multi-disciplinary environment including leading collaboration with clients and contractors, and proven ability and technical knowledge to lead across the full project lifecycle. Takes broad perspective to identify innovative solutions, challenges the status quo. Demonstrates in-depth knowledge and broad expertise in Civil Water engineering including thought leadership in risk assessment, quality control, proactive design management and collaboration with key disciplines involved in water infrastructure design and delivery, for example MEICA, structures, and Demonstrates exemplary communication skills, with the ability to convey complex technical concepts clearly and effectively to diverse stakeholders. Expert knowledge of current design codes and standards as well as industry best practices, including CDM regulations, Eurocodes, regulatory bodies, water utility standards, NEC. Proficiency in applicable analytical software and related tools such as Autocad, Civil3D, Revit, CDEs, ArcGIS, MS Suite, Power BI. Experience in Water market is essential. Experience in other markets is also beneficial. Comfortable liaising with stakeholders at all levels both internally and externally. Benefits Salary circa £60-80k - dependant on experience level 25 days annual leave plus bank holidays 10% matching pension Private medical Other company benefits

APQP Project Engineer Location: Oldbury Salary: £45,000 - £50,000 (DOE) Hours: 39.5 per week (Mon-Thurs 8:00-16:45, Fri 8:00-13:30) Contract: Permanent Join a Leading UK Engineering & Manufacturing Organisation Hawk 3 Talent Solutions are delighted to be recruiting an APQP Project Engineer for a highly successful and growing manufacturing business based in Oldbury. Operating across multiple sectors including Automotive, Defence, Medical, Transport, Electronics and more, this organisation is known for delivering high quality engineered solutions and operates to ISO 9001 standards while progressing toward IATF accreditation. This is an exciting opportunity for an experienced APQP professional to take ownership of automotive project quality, lead cross functional activities, and play a key role in ensuring successful product launches. The Role As the APQP Project Engineer, you will be responsible for leading all phases of APQP and PPAP activity for automotive customers. You'll work closely with engineering, operations, quality, suppliers, and customers to ensure projects are delivered on time, to specification, and in line with industry standards. Key Responsibilities APQP & PPAP Management Lead and coordinate all APQP phases in line with IATF 16949 and AIAG guidelines Create and maintain APQP documentation including Process Flows, PFMEA, Control Plans, MSA and capability studies Prepare and submit PPAP packages, ensuring approval prior to SOP Cross Functional Collaboration Work closely with engineering, operations, quality, sales and customers Facilitate gate reviews, problem solving workshops and cross functional meetings Support supplier readiness and supplier APQP activities Risk Identification & Mitigation Conduct risk analysis using FMEA, 8D and other quality tools Drive corrective actions and improvement plans Monitor and report project milestones and timing plans Launch Support Support prototype builds, pilot runs and production validation Participate in process audits, run at rate and capability assessments Feed continuous improvement and lessons learned into future programmes Experience Required Strong working knowledge of APQP, PPAP, FMEA, MSA, SPC and Control Plans Understanding of automotive manufacturing processes Familiarity with IATF 16949 quality management systems Ability to interpret CAD, engineering drawings and GD&T Experience within an Automotive Tier 2 environment is desirable Skills & Attributes Strong initiative and problem solving ability Excellent communication and time management skills Customer focused approach Confident using Microsoft Office (Outlook, Word, Excel) Apply today through Hawk 3 Talent Solutions to find out more. If you would like to apply for the role of APQP Project Engineer then please email your CV to (url removed) or call Donna on (phone number removed).For a confidential discussion or to apply, contact Hawk 3 Talent Solutions today. Closing date is 10.05.2026 Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future