Senior system engineer jobs in MaidenheadCreate job alerts

Job title: Senior Embedded Software Engineer Location: Maidenhead, Berkshire Salary Range: Negotiable About The Role: As a Senior Embedded Software Engineer, you will be reporting to the Software Engineering Manager as an embedded systems developer. Responsible for integration of hardware and software, this exciting role will place the right candidate at the forefront of unmanned air systems development in the UK. We seek someone looking to support in the development and verification of flight control software. You will be supporting in the delivery of engineering outputs including software requirements, software design, software implementation and software testing. Applying your knowledge and principles of engineering to assist in the implementation of aircraft control systems to a high degree of safety and reliability Ability to hold Security Clearance – 5 years residence in the UK What you’ll being doing (not limited to): • Design and Development: Architect, design, and/or develop small modules, features, or entire embedded software products. Understanding the needs of the hardware and ensuring the software meets the solution customed to the client’s requirements., • Testing and Implementation: Responsible for the thorough testing of embedded software to ensure reliability and functionality. Implement software in a manner that is optimized for the specific hardware it controls., • Cross-functional Collaboration: Work closely with other engineering teams to ensure software and hardware compatibility with the whole system. Participate in all phases of the development cycle, from concept to release., • Technical Expertise: Malloy’s growth bedrock is based on innovation and learning. This requires, maintaining and broaden knowledge in technical disciplines such as networks, operating systems, sensor systems and signal systems. Apply this expertise to develop high-quality embedded software solutions., • Problem Solving: Resolve issues using good technical knowledge and judgment. Consult with senior team members for complex problems outside of established procedures. Essential Skills and Experiences: • Proficiency in programming languages such as C/C++ with years of experience in Firmware design., • Experience with embedded software development tools (e.g. STM32) and environments (e.g., debuggers, emulators, compilers, KiCad)., • Knowledge of hardware-software integration and experience with 16/32-bit microcontrollers, microprocessors, Lora Modules and FPGA-based systems., • Familiarity with communication protocols (e.g., CAN, UART, SPI, I2C)., • Understanding of software development lifecycle and methodologies (e.g. Agile, V-Model methods)., • Experience with version control systems (e.g., Git, SVN). Desired Skills and Experiences: • Managing a small team, • Manage workload, divide and distribute tasks, • Knowledge of Ardupilot, ELRS, signal processing and control systems can be beneficial., • Exposure to other programming languages such as Python, Rust, C++., • Knowledge of safety related engineering practices., • Background of aeronautics and control systems., • Familiarity with PID control loops., • Experience with flight control systems. Benefits you may be eligible for: • Working Environment: 9-day fortnight: free parking, free lunch on working Fridays’, fruit twice a week, tea and coffee., • Company Pension Scheme, • Discretionary Employee Incentive Bonus Scheme, • Employee Share Incentive Plan (BAE Systems), • Company Sick Pay, • Maternity and Paternity enhanced Leave, • Healthcare Cash Plan including Virtual GP, Dental Cover, Vision Cover, Discounted Gym Membership, and much more! Free coverage for children under 2 years old., • 20 days Annual Leave, increasing with long service, • Employee Assistance Programme (24hr Helpline), • Mental Health First Aiders, • Cycle to Work Scheme, • Casual Dress, • Bronze Level Armed Forces Covenant which signals our commitment to supporting the Armed Forces. Malloy Aeronautics employees will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Malloy Aeronautics is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in certain assessments or interviewing, please speak to your recruiter about potential reasonable adjustments. Note: If you have not heard from our recruitment department within 14 days, unfortunately you have not been successful. Malloy Aeronautics and BAE Systems may process information about you that may be subject to data protection laws. For more information about how we use and protect your personal information and your rights, please refer to our Privacy Notice.

Quality Manager • Sovrin Medical Plastics Ltd, • Location: UK (on-site), • Contract: Full-time, Permanent About Sovrin Medical Plastics Sovrin Medical Plastics Ltd is a well-established UK manufacturer specialising in medical device moulding and cleanroom manufacturing. With a long-standing reputation for quality, compliance, and technical excellence, we support leading medical and healthcare customers with precision injection-moulded components and validated manufacturing processes. Operating within a regulated ISO 13485 environment, quality is central to everything we do. The Role We are seeking an experienced Quality Manager to lead and continuously improve our Quality Management System and ensure full compliance with ISO 13485 and applicable regulatory requirements. This is a hands-on leadership role, working closely with Operations, Engineering, and Customers to ensure robust processes, effective risk management, and audit readiness at all times. Key Responsibilities • Own, maintain, and develop the ISO 13485 Quality Management System, • Act as site lead for external audits (customers, notified bodies, regulators) and internal audits, • Manage CAPA, deviations, non-conformances, and complaints through to effective closure, • Ensure compliance with regulatory and customer requirements for medical device manufacture, • Oversee document control, change control, and validation documentation, • Lead quality input into new product introduction (NPI) and process changes, • Manage supplier quality, including supplier approval and performance monitoring, • Drive continuous improvement and quality culture across the business, • Provide leadership and mentoring to quality team members as their line manager Skills & Experience Required • Proven experience as a Quality Manager (or Senior Quality Engineer) in a manufacturing environment, • Strong working knowledge of ISO 13485 (medical devices essential), • Experience within plastic injection moulding, cleanroom, or medical manufacturing highly desirable, • Confident leading audits and interfacing with customers and external bodies, • Practical experience of CAPA, risk management, and validation activities, • Strong attention to detail with a pragmatic, solutions-focused mindset, • Excellent communication skills at all levels, • Strong IT skills for working in a data-driven environment (ERP experience desirable) What We Offer • Key leadership role within a respected medical manufacturing business, • Opportunity to shape and strengthen quality systems and culture, • Stable, long-term position in a growing and technically capable organisation, • Competitive salary, commensurate with experience

Chief Engineer - Avionics & Autonomous Systems Location: South East UK An advanced aerospace engineering organisation developing next-generation unmanned aircraft systems is seeking a Chief Engineer Avionics & Autonomous Systems to lead the technical direction of its avionics and flight systems capability. This is a senior technical leadership role responsible for system architecture, avionics integration, and the development of autonomy and flight software across cutting-edge UAV platforms. The position is ideal for a principal-level avionics or systems engineer looking to step into a Chief Engineer / Technical Authority role within a fast-moving aerospace environment. The Opportunity You will act as the technical authority across avionics and autonomous flight systems, working closely with engineering leadership and multidisciplinary teams to deliver complex unmanned aircraft platforms from concept through to flight testing and production. The organisation already has strong hardware capability in place, and this role will bring deep systems and software expertise to complement the existing avionics leadership. Key Responsibilities • Define and lead avionics and flight systems architecture across UAV platforms, • Provide technical leadership and engineering authority across multidisciplinary teams, • Drive integration of embedded software, flight control systems and autonomy stacks, • Lead complex technical decisions, system trade-offs and design reviews, • Produce and oversee detailed technical documentation and system specifications, • Support verification, validation and flight test activities, • Ensure engineering outputs align with aerospace and safety-critical standards Experience Required • Extensive experience in avionics systems and aircraft systems engineering, • Strong background in embedded software, flight control systems or autonomy, • Experience defining system architecture for complex aerospace platforms, • Ability to produce high-quality technical documentation and engineering specifications, • Experience working within multidisciplinary aerospace engineering teams Desirable Background • UAV / UAS / autonomous aircraft experience, • Aerospace or safety-critical systems development, • Experience operating as Principal Engineer / Technical Authority / Chief Engineer

Are you currently working in the door industry and looking to progress your career in Senior engineering role? A leading manufacturer of automatic entrance systems is offering a newly created Door Engineer position for someone with solid industry experience. The role covers Milton Keynes and Luton areas, providing a varied and active field-based workload. Your starting salary BASIC will be £47,500, with realistic first-year earnings of around £60,000 OTE. A fully equipped, modern company van, PDA, and mobile phone are also provided, along with premium overtime opportunities. Benefits include door-to-door travel pay, a company pension scheme, 25 days of annual leave plus bank holidays, and employer pension contributions of up to 6%. The company also offers several additional perks, making this a strong opportunity for a motivated engineer looking for stability, support, and long-term career growth. Responsibilities of an Senior Door Engineer You'll be reporting to the Service Manager and be expected to be in control of the maintenance, service, and repairs of automaic swing and sliding automated entrance systems as well as Industrial doors within a local postcode area. Each day you'll be working with an assortment of equipment produced by the company in their factory. You will be expected to manage your own work in progress, ensure all relevant paperwork is completed accurately, attend regular training courses to maintain up-to-date knowledge of equipment, and be an active team player sustaining the company's fantastic reputation and future growth. Essential Requirements of a successful Senior Door Engineer • EN16005, IPAF, PASMA, • Previous practical experience working on swing, sliding entrance systems and industrial door systems, • Excellent customer service skills, • Attractive starting salary package of £47,500 basic OTE circa £60k+ in your first year, • Overtime rates minimum, • Paid from when you leave home to when you return home, • On-call support every 5th week rate, • Company van and fuel card, • 25 days annual leave and 8 bank holidays (33 total), • Company pension scheme, • Buddy support system in place during training period, • Company laptop and phone, • PPE and Uniform supplied, • Ongoing manufacturer training, • Technical support available JBRP1_UKTJ

Senior Sales Engineer IREF Is this the role you are looking for If so read on for more details, and make sure to apply today. What we offer • Competitive salary and company car + commission., • Paid holidays and sick pay, • Comprehensive benefits package including pension, life assurance, employee assistance program, employee referral scheme, employee discounts including high street brands, cycle 2 work scheme and discount on Johnson Controls security products, • Extensive product and on the job/cross training opportunities with outstanding resources available, • Encouraging and collaborative team environment, • Career development through various career ladders including Customer Service, • Dedication to safety through our Zero Harm policy, • Access to business resource groups, • Training on our company values Responsible for the sale of project works to FMs contractors and end user customers. Whilst building and maintaining long-term customer relationships and using company defined sales processes & tools to increase revenue. Responsible for managing large scale, complex bids whilst facilitating the wider teams and support functions to ensure quality bid submissions. Solutions might include: Chiller / Heat Pump Product sales (both synthetic refrigerant and natural). Turn key installation projects. Large scale service works. System modification works. Retrofit projects. Design and Build refrigeration / A/C solutions. Service and maintenance contracts. How you will do it • Identify new customers through various methods and sell large scale projects across our core business., • Owns and directs long-term customer relationships/partnerships and fully responsible for customer satisfaction through executing the sales process., • Seeks out, qualifies and closes large sales opportunities, with a focus on new business growth., • Demonstrates expertise and knowledge of the competitor's business strategies, products and services and leverages that favourably to differentiate Johnson Controls from them., • Seeks out, qualifies and closes large & more technically complex new sales opportunities., • Ability to assist with solutioning projects with design teams and independently should the need arise., • Ability to work with design teams to analyse project solutions and present benefits to the client., • Ability to use SPIN selling techniques., • Creates competitive, high quality and timely estimates, bids, proposals, and cost/benefit analysis., • Ensures that new proposals and bids are compliant with Johnson Controls standards & expectations prior to customer presentation., • Owns final negotiations on value and impact to the customer's business in order to close the sale., • Builds & maintains network of experts & industry contacts., • In addition to the above mentioned tasks, other activities and responsibilities may be individually defined., • Relevant experience within IREF industry with an emphasis on chillers, heat pumps and HVAC products and applications., • Knowledge and understanding of selling service maintenance contracts., • A demonstrable track record of dealing with End Users, FMs and contractors and developing a strong working relationship in order to increase sales., • Business acumen & strategic thinking., • Ability to inspire and influence internally and externally., • Commercially Astute., • Excellent initiative, and interpersonal communication skills both in writing and verbally. #LI-TL1 Remote: #LI-Hybrid

We are seeking an experienced Principal Integration Engineer to lead the design, implementation, and optimisation of healthcare system integrations across clinical and diagnostic environments. Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. This is a senior, hands-on role requiring deep expertise in HL7 messaging, DICOM workflows, and healthcare interoperability, with a strong background in laboratory, radiology, and screening systems. You will act as a technical authority, working across vendors, clinical teams, and IT stakeholders to deliver robust, scalable integration solutions. Key Responsibilities Integration Architecture & Delivery * Design and implement HL7 interfaces, DICOM integrations, and workflow solutions * Lead integration development using platforms such as Mirth Connect * Architect end-to-end interoperability across LIMS, RIS/PACS, Order Communications, and clinical systems * Ensure high availability, scalability, and performance of integration pipelines Technical Leadership * Act as Principal Engineer / SME for all integration-related initiatives * Define best practices, standards, and governance for integration design * Lead troubleshooting, root cause analysis, and proactive maintenance Stakeholder & Vendor Engagement * Liaise with clinical stakeholders, NHS teams, and third-party vendors * Translate clinical workflows into technical integration solutions * Manage vendor relationships and support escalations Delivery & Support * Lead integration projects including upgrades, migrations, and new deployments * Oversee UAT, validation, and go-live support * Provide 3rd level support for critical systems Required Skills & Experience Essential * Experience in Healthcare / Clinical IT systems * Strong expertise in: * HL7 (v2.x messaging, Order/Result workflows) * DICOM integrations and imaging workflows * Integration engines (e.g. Mirth Connect) * Experience with: xrnqpay * LIMS (e.g. TelePath or equivalent) * RIS/PACS systems * Order Communications / e-Results * Proven experience leading integration architecture and delivery * Strong troubleshooting and problem-solving capability * Experience with diagnostic platforms (e.g. screening systems, lab middleware) * Knowledge of NHS clinical workflows and standards * Familiarity with: * Middleware solutions (e.g. Abbott AlinIQ AMS) * Automation tracks and lab instrumentation * Experience in cloud or hybrid integration environments *Rates depend on experience and client requirements

Audio Visual Service Engineer (Control 4 / Lutron) Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. £40,000 - £50,000 + Van + Tools + Paid Travel + Overtime London & UK Travel | Autonomous Field Role | Fast-Tracked Progression Are you an AV Service Engineer from a Smart Home / Residential AV background looking to join a market-leading specialist offering fast-tracked progression, specialist training and long-term career development as the company continues to expand? This is a field-based service role where you'll primarily support luxury smart home systems, while gaining exposure to commercial AV and automation projects as the business grows. You'll work autonomously on technically complex systems, with the opportunity to broaden your skill set and step into more senior or specialist positions If you enjoy ownership, variety and working with premium technology - rather than being boxed into a single system or environment - this role offers genuine long-term progression. The Role • Carry out reactive and preventative maintenance on integrated AV, cinema and automation systems, • Fault-find and support Crestron and/or Lutron control environments across residential projects, • Background in high-end residential AV / smart home installation or service, • Hands-on experience supporting Crestron and/or Lutron systems in live environments, • Strong working knowledge of IP networking (WAPs, routers, switches, VLANs, subnets), • Company van, tools, laptop and mobile provided, • Paid overtime and all travel expenses covered (UK & occasional international) AV Service Engineer, Residential AV Engineer, Smart Home Engineer, Commercial AV Engineer, High-End Residential AV, Crestron, Crestron Home, Lutron, Lighting Control, Home Automation, Home Cinema, IP Networking, AV-over-IP, Field Service Engineer, London

Senior Site Reliability Engineer (SRE) UK Remote Permanent | Up to £120,000 | Fully Remote (UK Only) This Is NOT a DevOps Role Real SRE Work Only Were looking for a true Senior Site Reliability Engineer with deep incident management experience, strong operational ownership, and expert Linux/AWS troubleshooting skills. This role is focused entirely on reliability, availability, incident response, and systems engineering not building CI/CD pipelines or acting as DevOps by another name. Leadership Requirement Small Team Technical Lead You must have experience leading a small engineering team (25 people), defining technical direction, improving on-call processes, and owning reliability strategy. This is a hands-on role with real SRE leadership not people management. About the Role As a Senior SRE, you will own the reliability, resilience, and operational health of large-scale AWS/Linux systems. Youll join an engineering organisation where SRE principles are fully embedded, respected, and treated as a distinct discipline. Key Responsibilities Lead major incidents, mitigation, RCA, and preventative improvements Own and refine SLIs, SLOs, and error budgets Reduce operational toil through automation Deep-dive Linux debugging, performance tuning, and systems analysis Strengthen observability, monitoring, and alerting Provide technical leadership to a small SRE/engineering group Improve and manage on-call processes (PagerDuty, OpsGenie, etc.) Collaborate with development teams to build reliability into system design What Youll Bring Strong AWS experience (EC2, networking, autoscaling, IAM, load balancing) Deep Linux troubleshooting skills (performance, networking, debugging) Real 24/7 production on-call experience Hands-on incident management and postmortems Experience mentoring or leading a small technical team Scripting/automation with Python, Go, or Bash Strong observability skills (Datadog, Prometheus, Grafana, CloudWatch) Why This Role Appeals to Real SREs Youll be solving actual SRE problems: reliability, incidents, resilience, uptime Youll guide a small team through complex engineering challenges JBRP1_UKTJ

Senior Cable Systems Design Engineer Location: Remote (with occasional travel to Thames Valley) Salary: up to £70,000 + benefits Are you experienced in designing cable systems for complex grid connection and BESS projects? Turner Lovell is recruiting a Senior Cable Systems Design Engineer for a leading UK energy infrastructure contractor delivering Battery Energy Storage (BESS) connection projects across the UK. This role sits within the engineering design team and focuses on the end-to-end design of 11kV -132kV cable systems, including routing from transformers to BESS units and around switch room environments. You will play a key role in ensuring cable designs are technically compliant, constructable, and aligned with client, industry, and regulatory standards. Key Responsibilities: • Develop cable system designs in line with client requirements and grid standards., • Design cable routing and layouts from transformers to BESS installations and within substations and switchrooms., • Prepare and deliver project-based cable system design packs covering both design and construction phases., • Undertake detailed engineering studies, including cable rating, induced voltage, cable pulling forces, and cable force calculations., • Liaise with suppliers and clients to ensure up-to-date technical information, approvals, and type registrations are maintained., • Strong understanding of cable systems and cable design., • Proven experience delivering 11kV - 132kV cable system designs, ideally for BESS, substation, or grid connection projects., • Experience using cable modelling software such as CYMCAP, Cableizer, ELEK or similar., • Competent in AutoCAD and comfortable working with Microsoft Office and engineering calculation tools. For more information or to apply, please contact Anusha Gopalan at or 020 7448 1100. JBRP1_UKTJ

Planned Preventative Maintenance Engineer Mate - Fire Systems - Pirin Court - Sun to Thurs Job Summary Reporting to the Senior Supervisor, the Planned Preventative Maintenance Engineer Mate will undertake planned maintenance activities on a wide range of Fire Systems assets mainly on the Trackside environment. You'll be working on a permanent night Sunday to Thursday pattern and in all weather. You'll be working as part of a team and completing tasks individually as well. You will ensure you always work safely. There will be a great deal of travel from station to station, so it is imperative that you have a full driver's license Key Deliverables • Completing preventative maintenance tasks on a nightly basis for fire system within Rail, • Experience to assist the delivery of daily tasks in line with business expectations, • Working as part of a team and individually dependant on task, • Health and Safety awareness and practice, • Reporting of progress to site person in charge on a regular basis, • Provide accurate site reports on completed activities to either the site SPC or your line manager, • Responsible for completion of maintenance against defined schedule, • Ensure maintenance is completed to required standard and report any issues, • Complete any administration tasks in a timely manner, • Comply with relevant QEHS requirements, • Knowledge of required system maintenance procedures relating to the specific contract you are aligned too - Fire Systems within Rail, • Previous working knowledge of appropriate Fire Systems, • Previous experience working within the LUL or Rail environment, • Must have a driving licence, • Happy to take part in a drug and alcohol test as you will be working trackside JBRP1_UKTJ

Commissioning Engineer Field based Up to 65k Job Purpose The Commissioning Engineer will be responsible for cold commissioning various projects all around the UK and mentoring young aspiring commissioning technicians. A strong understanding of cold commissioning 11-33kV switchgear. Liaising with customers representatives and delivering switchgear installations for various manufacturers such as Siemens, Schneider, Ormazabal, ABB etc Key Accountabilities Mentor up and coming Test & Commissioning technicians. Carry out and document all tasks associated with the pre-commissioning / commissioning of the equipment. Be responsible in handing over a fully operational system for acceptance by the customer. Ensure health and safety procedures and standards are followed on site. Ensure all Health and safety documentation is filed, maintained and updated on site. Ensure commissioning schedules, handover and witnessing documents are updated, maintained, completed and filed / issued to project manager prior to project completion. Carry out factory acceptance testing when required, Site acceptance testing and customer witnessing. Ensure sites are cleared of equipment and materials / products prior to handover / completion. To undertake any other duties as requested by senior staff within the company Job Skills, Experience and Qualifications HNC or equivalent in Engineering. Excellent communication skills in English, both written and verbal and ability to communicate effectively. Computer literate with experience of Microsoft PowerPoint, Excel, Word, Outlook. Full UK Driving license. Has good working knowledge of basic protection relays and functions. Can perform tests such as Contact resistance (Ductor), Insulation resistance, AC dielectric with-stand tests, CT/VT primary and polarity checks, relay secondary injection, scheme checks and CT analysis. Capable of working with protection relays and making minor changes to settings and configs as and when required. Installation tests on distribution Transformers. Assist Senior Commissioning Engineers on major projects

Our client is a well-respected Sprinkler Contractor, installing and maintaining sprinkler systems on mainly commercial projects. They would like to recruit Sprinkler Service Coordinator. You will have worked as a Service Coordinator, ideally within sprinklers. Role: • Maintaining and developing good client relationships with existing client accounts., • Together with Service Manager, you will manage the time and diaries of maintenance engineers., • Ensure commercially efficient logistical planning of external resources across both installation and service & maintenance teams., • Report to Senior Management on key performance indicators set., • In line with company monitoring, manage and review external contractors and suppliers., • Secure compliance within the company by participating in external company audits – these will include: - BRE Product Management (LPCB Certification), Health & Safety, Quality Management ISO901:2015. Key Duties and Responsibilities: Maintain good client relationships within existing clients. With a focus to increase the number of Service Agreement Clients. Helpm prepare quotations for new or remedial works within the given timeframes. To ensure that all site engineers have continuity of work and to make sure all engineers have the correct parts and equipment to undergo their planned works. Scheduling and the booking of Service works, using our internal systems and following existing processes. Ensure that H&S and Quality Management Systems, procedures and policies are being adhered to internally with our site engineers and externally with Subcontractors. Working with our compliance administrator to ensure the engineer teams training certificates (internal & external) are maintained and the Training Matrix within our Quality Management System remains current at all times

MES Implementation Lead Hybrid - Slough / Client Sites We are recruiting for an MES Implementation Lead to support the delivery of manufacturing execution and shop floor digital systems across industrial production environments. This role is suited to someone with a background in industrial automation, MES, control systems and production line software who is comfortable working between operations, engineering and technical teams. The work is focused on implementing and improving MES and related manufacturing systems used for line control, traceability, production visibility and process optimisation. You will take a leading role in understanding how production lines operate, translating operational requirements into system solutions, and supporting the delivery of systems that perform reliably in live manufacturing settings. This is a hands on delivery role for someone who understands the manufacturing execution layer and how it connects shop floor equipment, control systems and wider business systems. What you will be doing Work closely with customers and internal teams to understand manufacturing processes, line layouts, operational requirements and system challenges Lead the implementation, configuration and improvement of MES and shop floor systems within live production environments Deliver solutions for production tracking, traceability, data capture, inspection processes and operational visibility Support and guide integration between MES, PLC, SCADA, industrial data platforms and wider business systems such as ERP Contribute to functional analysis, solution design, testing, commissioning and go live activity Take ownership of resolving technical and operational issues affecting MES performance, system reliability and data quality Produce clear technical documentation, workflows and support material for users and internal teams Work closely with production, engineering, IT and quality teams to ensure systems align with how the factory operates Support and guide upgrades, enhancements and continuous improvement activity across manufacturing systems What we are looking for Experience delivering or leading MES or manufacturing systems implementation within live production environments Strong understanding of shop floor operations, production lines and manufacturing execution systems Experience working with industrial automation and control systems, including exposure to PLC, SCADA or similar technologies Understanding of how manufacturing systems sit between shop floor equipment and enterprise systems Experience with system integration, industrial data flows and real time production information Strong technical problem solving skills and ability to work through issues in live operational settings Comfortable working with cross functional teams including operations, engineering, IT and quality Able to produce functional and technical documentation to support delivery and long term system use Useful background Industrial automation MES delivery or support Production line software Manufacturing systems integration ISA95 aligned environments Process or discrete manufacturing Industry 4.0 or digital manufacturing projects This role is likely to suit someone coming from MES Implementation Lead / Senior MES Engineer Manufacturing Systems Engineer Industrial Automation Engineer Controls and Manufacturing Systems Engineer Digital Manufacturing Engineer Industrial Software Engineer If you have a background in MES or manufacturing systems and want to contribute to innovative, real world digital transformation projects we’d love to hear from you

Job Specification: Electrical Design Engineer (Senior - Lead) Business Unit: Data Centre Design Consultancy (Client Side) Location: Remote Reporting to: Associate Director/Director Overview We are seeking highly skilled Senior and Lead Electrical Design Engineers to join our specialist data centre design consultancy team. These roles will be responsible for driving the design, coordination, and delivery of complex electrical systems for hyperscale, colocation, and enterprise data centre environments. You will work directly with clients, end users, and multidisciplinary engineering teams to develop high‑quality, technically robust designs from concept through to construction. Core Responsibilities (All Levels) Lead and produce electrical designs for data centre infrastructure including: HV and LV power distribution UPS systems (static and rotary) Standby generation Earthing and bonding Lighting and small power Busbar distribution systems Develop design documentation: calculations, reports, schematics, single-line diagrams, and specifications. Collaborate with mechanical, structural, architectural, and commissioning teams. Ensure compliance with: UK/EU electrical standards (BS7671, EN standards) Uptime Institute Tier guidelines Client technical specifications Local authority and utility provider requirements Participate in technical design reviews and value engineering workshops. Support tender evaluations, contractor queries, and construction phase design support. Contribute to continuous improvement of design processes and best practices. Experience & Requirements by Level Senior Electrical Design Engineer Experience Typically 5-8 years electrical design experience. Demonstrable experience designing critical power systems. Prior data centre project exposure preferred but not essential if background includes mission‑critical environments (pharma, hospitals, industrial). Competent in delivering multiple design packages under guidance from a Lead or Principal Engineer. Technical Competencies Strong grasp of: LV distribution design UPS system selection & load calculations Generator sizing Cable sizing and fault level studies Competent in electrical calculation software (e.g., Amtech/Trimble, Dialux, ETAP beneficial). Ability to produce design deliverables independently with technical checking by senior leadership. Soft Skills Good communication and client‑facing ability. Ability to work collaboratively in multidisciplinary teams. Strong organisational skills and proactive problem solving. Principal Electrical Design Engineer Experience 12-18+ years experience in electrical engineering with deep specialism in data centre design. Demonstrated ability to lead multi‑disciplinary design teams on hyperscale or global data centre programmes. Strong experience engaging with end users, developers, and hyperscale clients at a strategic level. Technical Competencies Recognised expert in: High‑voltage system design, utility grid integration & negotiations Full MEP system interaction & resilience strategies Advanced power systems: network modelling, short‑circuit analysis, arc flash studies, and system selectivity Designing to Uptime Institute Tier III & Tier IV Ability to define project technical strategy, design principles, and standardisation frameworks. Leadership & Strategic Responsibilities Acts as the Technical Authority for electrical systems. Leads QA/QC process and sets engineering standards across projects. Provides key input into bids, proposals, and business development. Trains, mentors, and develops the engineering team. Coordinates with Directors on resource planning, pipeline forecasting, and client strategy. Soft Skills Exceptional communication, influencing, and negotiation ability. Ability to represent the business as a subject matter expert. High‑level problem solving, innovation, and risk management. Lead Electrical Design Engineer Experience Typically 8-12+ years experience in electrical building services design. Proven track record leading electrical design on major data centre projects. Experience interfacing directly with hyperscale or colocation clients (Google, AWS, Meta, Microsoft, etc., if applicable). Capable of managing electrical design delivery across entire projects or programmes. Technical Competencies Expert knowledge of: Complex power distribution (N+1, 2N, 2N+1 systems) HV systems design and utility interfacing Advanced power system studies (discrimination, arc flash, harmonic analysis) Resilience modelling & load diversity assessments Ability to technically lead teams and review work from Senior and Junior Engineers. Strong commercial awareness and ability to influence design strategy. Soft Skills Excellent communication and stakeholder management skills. Comfortable presenting to clients, design teams, and senior leadership. Strong leadership in design coordination, technical decision-making, and project delivery. Ability to mentor and develop junior engineers. Please click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

Are you an experienced Security Engineer? Fancy making the step up to work with a leading Security company, maintaining and repairing systems throughout the local area? Do you want to work for a company thats small enough to care yet big enough to give you career stabiity and an exciting future? We are seeking a Senior Engineer to join our team covering High Wycombe and surrounding areas Job Summary Perform regular maintenance, testing, and troubleshooting of security systems to ensure optimal functionality. Diagnose and rectify faults quickly, effectively and efficiently. Perform reactive service visits as required to meet contracted customers service level agreements. Perform planned preventive maintenance visits as required in line with contracted customers service level agreements. Provide support and advice to clients regarding their security systems, addressing queries and offering solutions to resolve issues. Ensure all work complies with health and safety regulations, industry standards, and company policies. Maintain accurate records of work performed, including reactive service and planned preventive maintenance reports. Work closely with the service administration and engineering teams to ensure we deliver exceptional service to our clients. To be available for standby on a call out Rota, as required within the team. As the business grows manage and mentor service engineering team Skills Strong diagnostic and problem-solving skills. Understanding of current industry standards and regulations (e.g., BS EN 50131, PD6662, NCP 104 and NCP 109). Excellent communication and customer service skills. Ability to work independently and as part of a team. Good time-management skills. Able to identify and solve problems independently. Have a professional and positive attitude when dealing with customers. Complete detailed work reports accurately and in good time. Knowledge & Experience Proven experience maintaining and repairing security systems, such as CCTV, intruder alarms and access control. Proven experience maintaining and repairing enterprise level systems such as LenelS2, Gallagher, C-Cure etc. Experience with IP-based security systems, networks and security systems software applications. Relevant industry and manufacturing training is favorable. Relevant industry qualifications such as 18th edition/NVQ/City and Guilds/BTEC is not essential but would be an advantage. Role Specific BS7858 Security Screening Enhanced Disclosure & Barring Service (DBS) check SC Clearance is favorable Full, clean driving license Right to Work in the UK Participate in a 24-hour emergency call out Rota system TPBN1_UKTJ

Our client is a well-respected Sprinkler Contractor, installing and maintaining sprinkler systems on mainly commercial projects. They would like to recruit Sprinkler Service Manager. You will have worked as a Sprinkler Service Engineer and, either, worked as a Service Manager or be ready to make the step up. Role: • Maintaining and developing good client relationships with existing client accounts., • Ensure there is a continuous pipeline of new service & maintenance works, both with new clients and existing accounts., • Together with our Head of Business, drive and develop the opportunity of the Residential Sprinkler market for both installation and maintenance contracts., • Demonstrate and deliver strong technical problem-solving skills., • Ensure commercially efficient logistical planning of external resources across both installation and service & maintenance teams., • Lead and educate external resource to seek new opportunities., • Report to Senior Management on key performance indicators set., • In line with company monitoring, manage and review external contractors and suppliers., • Secure compliance within the company by participating in external company audits – these will include: - BRE Product Management (LPCB Certification), Health & Safety, Quality Management ISO901:2015. Key Duties and Responsibilities: Actively seek new business. Following up on incoming enquiries as well as proactively seeking new opportunities. Develop new business and maintain good client relationships within existing clients. With a focus to increase the number of Service Agreement Clients. Prepare quotations for new or remedial works within the given timeframes. Attend necessary Client/Site/Project Meetings. To ensure that all site engineers have continuity of work and to make sure all engineers have the correct parts and equipment to undergo their planned works. Scheduling and the booking of Service works, using our internal systems and following existing processes. Ordering of materials and hire equipment for specific works. Using our approved suppliers, ensuring profitability is maintained within the scope of the project/works. Ensure that H&S and Quality Management Systems, procedures and policies are being adhered to internally with our site engineers and externally with Subcontractors. Working with our compliance administrator to ensure the engineer teams training certificates (internal & external) are maintained and the Training Matrix within our Quality Management System remains current at all times. 1048 Certification, ensuring your departments work practices and process are following these company policies. Occasional overtime working i.e. Emergency Call-Out Rota (if needed)

Position: Software Engineer Location: Bristol or Slough Salary: £40,000-£45,000 My client is a long-established Engineering Services company supporting clients across the UK within the pharmaceutical and food processing sectors. They are looking to employ a junior software project engineer based in either Slough or Bristol although a significant amount of working from home can be expected once fully inducted. A clean driving licence and a willingness to travel to project sites is essential. As a member of one of the Project Teams, the position will suit a software/automation graduate with a couple of years' post-graduation experience. The software team is responsible for all aspects of assigned software projects from commencement to completion of commissioning, ensuring that all work adheres to all company safety policies and customer requirements. This position reports to the senior Software Manager and demands an attention to detail and a good interface with client engineers. Software Engineer Overview Assisting in costing projects in terms of materials and labour and producing quotations for software projects Producing Risk Assessments and Method Statements (RAMS) for projects Writing detailed Functional Design Specifications (FDS) from customer UserRequirements Specifications (URS) Configuration of control system architecture and network connections Production and modification of PLC / HMI / SCADA software Installation, modification, retrofit, commissioning and fault diagnosis of control panels and associated process equipment Supervision of electrical employees and subcontractors in food productionenvironments Software Engineer Requirements Ideally hold an Electrical Engineering degree/HND/HNC or equivalent experience Ideally have good practical electrical qualifications (apprenticeship, or NVQ Level 3) Experience in the use of PLC Software Development (Allen Bradley / Siemens) an advantage Experience in the use of HMI / SCADA Configuration (FTView / Wonderware) an advantage Ideally have Electrical design including AutoCAD / EPlan or equivalent software knowledge Software Engineer Salary & Benefits £40,000 - £45,000 28 Days holiday inclusive of Bank holidays Mon - Fri: 08:00 - 17:00 Pension Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Follow project schedules set by the Systems Engineering Manager, playing a crucial role in delivering successful, cutting-edge engineering solutions. Degree or HNC in Electronic Engineering or Electrical & Electronics Engineering. We are looking for an experienced Control Systems Engineer to join ou

As a Senior Systems Engineer, you will take system-level ownership of sophisticated, high-precision products that combine advanced optics, laser-based processes, motion systems, controls, software and machine vision. Our client is looking for a Senior Systems Engineer to play a central role in the d

A global infrastructure consulting firm is seeking a Senior Cable System Design Engineer to lead projects across various voltage levels. Ideal candidates should possess strong experience in HV/EHV transmission with a solid understanding of cable routing and system analysis. Join a dynamic team in Lo

A leading technology firm in the United Kingdom is seeking a Senior System Validation Engineer focused on high-speed SerDes technologies. In this role, you will validate end-to-end communication systems involving RF and PHY components. Strong experience in system validation, knowledge of automation

Senior/Principal System Safety Engineer - Rail. Senior/Principal System Safety Engineer - Rail. Provide system safety support and guidance to clients on large, complex projects under the direction of the senior team.

AVP–VP level Systems Engineers. These roles sit within a platform engineering environment focused on reliability, governance and performance for trading and front-office workloads. You’ll work closely with cloud engineering, security, SRE and application teams to standardise platforms and improv

Good Systems Engineering knowledge, alongside the ability and desire to test new techniques and use new methods to develop concepts and complete system trade studies;. Copello are supporting a leading Defence client in their search for a Senior Systems Engineer. Based Systems Engineering (MBSE) and

A leading technology firm in the UK is seeking a Software Engineer III to enhance Android System UI and optimize public releases.

A leading engineering firm is seeking a Senior/Principal System Safety Engineer for rail projects. The role involves providing system safety support, leading projects, and collaborating on technical standards. Candidates should have a degree in engineering, relevant safety experience, and preferably

Senior Associate Director HV Cable System Design Engineer. As our UK and Continental Europe team continues to expand, we are seeking a Principal Cable System Engineer to support a range of high‑profile projects across our Power & Energy portfolio. This includes high‑voltage AIS and GIS substatio

I am seeking a highly skilled individual with excellent academics and 10yrs plus of hands on experience in wireless systems design, architecture or systems engineering. The System Engineering team leads the design and innovation for next-generation wireless networking products. This superb Principal

Experience with Systems Engineering, System Architecture, RF Systems, Datalinks, Verification, Requirements Capture, Secure Communications. With continued demand and innovation across their product range, they are hiring a Senior Systems Engineer to lead technical delivery on new and existing missio

Senior Systems Engineer (Linux, On-Prem, Python). Working closely with internal engineering teams and vendors globally. NAS) and system-level configuration (BIOS, kernel tuning, etc.

A tech company in the United Kingdom is seeking a skilled Integration Engineer to design and develop applications utilizing the Microsoft.

A Senior IT Systems Engineer is a senior technical leader responsible for the architecture, reliability, and security of the company’s core IT infrastructure and services. Help IT engineers grow from script-writers into systems thinkers — teaching them to build modular, testable, well-documented

As a Senior Enterprise Systems Engineer you will lead various projects, own a variety of technology solutions, and manage and improve the systems and tools that our employees use daily. This role will require a mix of software engineering and systems engineering skills, as you will select, build, an

Senior Reactor Systems Engineer page is loaded## Senior Reactor Systems Engineerlocations: Derby, UK: Manchester, UK: Warrington, UKtime type: Full timeposted on: Posted Todayjob requisition id: JR100468****Location: Hybrid UK based - Warri

Power System and Electrical Engineering experience in a systems or power electronics role. Motivated to join us and make a difference beyond earth? We are currently looking for a Senior Power Systems Engineer to join the team. Experience of Avionics & Spacecraft electrical systems beyond the power s

The ideal candidate will have 10–15 years of Systems Engineering experience and relevant degrees. A leading engineering consultancy is seeking a Contract Recruiter for nuclear, power, and renewables projects across the UK. This mid-senior level role offers a competitive package with bonuses, stron

A cutting-edge AI technology firm in the UK is seeking a Senior R&D Engineer to contribute to the design of innovative AI accelerators. This role requires a strong academic background in computer science or electrical engineering, with extensive knowledge of circuit design and programming.

Review system architecture and requirements; contribute to creating thorough test plans with system engineering and other technical teams. We are seeking a Senior System Validation Engineer with a strong emphasis on. Senior System Validation Engineer – SerDes Focus.

A leading marketplace platform for beauty & wellness is seeking a Senior Front-End Engineer.

A leading technology firm in the United Kingdom is seeking an experienced System Engineer to lead technical direction and architect scalable solutions. This role requires excellent communication skills to work with senior stakeholders and promote best practices within engineering teams. A degree in

A leading engineering company in the UK is seeking a Lead Engineer – Drive System Specialist to take ownership of engineering activities across complex projects. This role involves managing engineering teams, ensuring compliance with industry standards, and mentoring junior staff.

As a Senior System Engineer, you will:. Strong knowledge of modern Linux systems and systems programming concepts (e. Provide technical support for the production environment, ensuring system stability and performance.

Digital Buildings System Engineer. Maintain comprehensive documentation of onboarding processes, system configurations, and cloud settings; generate regular reports on onboarding status, system performance, and key metrics. Conduct pre- and post-onboarding testing to validate data integrity and syst

Through continuous improvement, assist in maturing packaging and delivery strategy to include areas such as application delivery, antivirus, security patching, drivers /updates, and endpoint build (PCs/ laptop/VM), and Operating System deployment. Manage and maintain system and process documentation

Provide power subsystem engineering, both high level architecture and detailed electronics design, from specification to integration. Perform requirements engineering (analysis, flow-up and down) related to spacecraft power systems, and the power interfaces of other on-board hardware. Motivated to j

They are expanding rapidly at the moment and are looking to expand their testing team with the addition of a Senior System Test Engineer. Degree in Electronic or Computer Science Engineering with experience testing telecommunication or satellite systems. Execute, plan and enhance system tests, contr

The Digital Buildings System Engineer manages the complete process of onboarding and integrating building management systems (BMS), IoT devices, and facility management solutions into a designated cloud platform. Technical expertise in delivering digital and smart building projects including buildin

Work across embedded Linux, bare‑metal, AI inference, wireless, cameras, and power systems. Small, high‑calibre engineering team with minimal red tape. Control systems and state machines.