Senior system engineer jobs in EdinburghCreate job alerts

Senior RF Engineer Edinburgh 12-month contract Paying up to £80p/h (Inside IR35) The Opportunity Our client is looking for Senior RF Engineers to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft, as well as advanced maritime and airborne surveillance platforms. Key Responsibilities • As an RF/Microwave Engineer, you will:, • Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration and production support., • Develop high-quality RF PCB and module designs using modern microwave technologies., • Create test prototypes to validate and verify designs., • Carry out detailed design activities from requirements capture through to verification., • Produce and maintain clear technical documentation and reports under configuration management., • Prepare manufacturing data packs and support subcontractors and manufacturing teams., • Work closely with systems, electronics and test engineers to resolve complex integration challenges., • A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered., • Microwave PCB materials and RF design techniques, • RF/Microwave subsystem design, • Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB), • EM simulation techniques (2D/3D), e.g. CST, • GaAs/GaN MMIC design and applications, • RF synthesiser design (DDS and PLL technologies), • RF downconverter and digitiser design, • Passive microwave structure design, • Non-linear circuit simulation, • PCB schematic capture tools (e.g. Mentor), • RF laboratory measurements (signal generators, spectrum analysers, vector network analysers), • Requirements capture and technical report writing This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

I'm partnered with a major organisation that's going through a huge SRE modernisation, and they're growing a brand-new, engineering-focused SRE function across their cloud platforms. We're now looking for an experienced Senior Site Reliability Engineer to join the team. This is real SRE work: reducing toil, building automation, improving system reliability and observability, and supporting large-scale cloud environments across Azure and GCP. The Role You'll be part of a unified SRE team supporting multiple cloud teams, working on: • Reliability, performance and observability across Azure/GCP, • Automation to reduce repeat incidents, tickets, and manual processes, • Improving SLOs, SLIs, error budgets and platform health, • Building and maintaining Terraform modules, GitHub pipelines and IaC, • Supporting app teams as they migrate large workloads to cloud, • 1-in-4 on-call (enhanced pay) What They're Looking For • 5+ years experience as an SRE in large/complex environments, • Strong Azure and/or GCP capability, • Terraform + CI/CD experience (GitHub, IaC, scripting), • Deep understanding of observability, data, logs and alerting, • Someone who wants to help shape a modern SRE culture - not just keep the lights on Why It's a Great Move • Massive modernisation programme, • Opportunity to influence tooling, processes and culture, • Multi-cloud exposure (Azure + GCP), • Proper engineering autonomy, • Clear progression opportunities as the team scales What they are offering: • Hybrid working environment with a requirement to be in the office 2 days per week (Leeds, Halifax, Manchester, Bristol or Edinburgh)., • Enhanced benefits package which includes flexible cash sum, private medical, enhanced pension contribution, 28 days + bank holidays and more. If you are interested in finding out more, please send across an updated version of your CV, clearing demonstrating your relevant experience!

What's the role? As a senior engineer at RYBKA , you will work closely with the associate to provide leadership and management of the Engineering team. You will provide technical expertise and direction for complex (and non-complex) engineering projects leading on delivery from briefing through to handover. This senior role combines hands-on technical leadership, management of engineering staff, as well as a requirement to support the learning and development of junior staff across the business. The role will require to work collaboratively with our BIM and sustainability teams to ensure our Engineering, BIM, and Sustainability services are delivered efficiently and to a consistently high standard with quality built-in to our outputs. The role includes project delivery, client engagement, team leadership, and supporting strategic growth of the consultancy.Working Conditions - Hybrid working model (typically 3 days office 2 days home) , Monday-Friday 37.5 contractual hours per week.Key Responsibilities:Electrical Technical Leadership and Standard • Take technical ownership and accountability for electrical design outputs and design sign-off in accordance with company governance procedures., • Deliver assigned projects to agreed programme milestones, maintaining high technical quality with minimal rework., • Ensure MEP designs are compliant with relevant standards and aligned with project brief., • Proactively manage internal team resource allocation to meet deliverables efficiently., • Maintaining commercial awareness and identifying risks early., • Lead electrical services design reviews and coordinate multidisciplinary interfaces., • Maintain positive client and industry relationships, • Act as technical focal point for electrical design queries, providing timely and consistent guidance., • Review key electrical designs across projects to ensure compliance with relevant standards (e.g. BS 7671, BS 5266, BS 5839, HTM where applicable) and internal QA procedures., • Liaise with other senior team members and leads to promote consistent electrical design philosophy across projects., • Support mentoring and upskilling of graduate and engineer-level staff through structured technical input., • Collaborate across the Rybka business including BIM and Sustainability Teams, • Continually develop knowledge to remain current with emerging technologies, regulations, and industry best practiceTeam Integration, • Lead and support mentoring of Engineers, Technicians, Graduates, and Trainees, • Develop technical capabilities within the team through training and knowledge sharing, • Implement existing training programmes to enhance team capabilities in Engineering designBusiness development, • Build and maintain relationships with Clients, Architects, Engineers, and Contractors, • Contribute to bid strategy, programme planning, and technical scope definition for new opportunities., • Assist in Preparation of fee / bid proposals and support client presentations, • Represent the company at industry eventsProject Management, • Lead project delivery ensuring quality, programme, and commercial performance targets are achieved., • Produce outline design, scheme design, and detailed design reports including drawings and specifications., • Coordinate with multidisciplinary teams including Architects , C&S Engineers, Sustainability Consultants etc, • Provide technical oversight during construction, including review of contractor submissions, site inspections, and resolution of technical queries., • Ensure projects meet quality assurance standards and client expectations, • Monitor project financial performance including fee utilisation, variations, and scope control in collaboration with senior leadership., • Support the Director and Associates in managing project commercials, including scope control, change management, and maintaining profitability targets.What we’re looking for:, • Strong understanding of engineering consultancy services and delivery models, • Substantial experience in Engineering Consultancy (or similar role) with demonstrable experience leading project delivery., • Proven track record in leading complex projects, • Experience managing teams and developing staff, • Experience in working on a variety of project sectors, • Understanding of engineering design and project delivery processes, • Excellent presentation and communication skills, • Strategic thinking and problem-solving capabilities, • Team development experience, • Fluent in English (speak, read & write)., • Proven track record in developing and maintaining effective working relationships at all levels., • Possesses a high degree of technical competence, • Proficiency in writing specifications, • Proficiency in carrying out calculations using technical software such as Elec OM, Amtech and Dialux, • Proficiency in software such as AutoCAD (Revit is desirable but not a requirement), • Strong knowledge of building regulations, energy standards, and certification schemes, • Understanding of renewable energy systems and low-carbon technologies, • Knowledge of sustainable Electrical systems including solar PV, and energy storage, • Understanding of building automation, smart building technologies, and IoT integration, • Knowledge of whole life and embodied carbon analysis, • Ability to work collaboratively in multidisciplinary environments, • Experience of operating in an ISO9001 Quality Management System., • Understanding of electrical load assessments, fault level studies, protection coordination, and resilience strategies, • Ability to review contractor design submissions and respond to technical queries during construction

CompanyOne of the countries' largest, most successful and award-winning multidisciplinary engineering consultancies. They have multiple offices across the UK and have a solid reputation for successful project delivery throughout numerous sectors within the Built Environment. Projects can vary from small works to £100m+ across Education, Heritage, High-End Residential, Cultural, Laboratories and more. They have a very modern, open-plan office space, you will get exposure to designing a wide range of electrical systems across multiple jobs and there is an excellent support system in place for staff training and development. They are currently seeking an Electrical or Senior Design Engineer at join their Edinburgh office.Role • Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems ., • Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc., • Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, dialux, Amtech, in-house developed tools, etc., • Representing the organisation at meetings with clients and contractors., • Site surveys, inspections and monitoring of site works., • Report and technical note writing., • Maintaining complete records and archives to company standards., • Degree or HND/HNC in Electrical Engineering, Building Services Engineering, or a related discipline, • Proven experience in electrical design within a building services consultancy or contractor environment, • Strong knowledge of UK building regulations and standards, including BS 7671 (IET Wiring Regulations), • Experience producing detailed electrical design calculations and drawings (lighting, power, small power, containment, earthing, fire alarm, data, etc.), • Good written and verbal communication skills, • 33 days holiday including publics, • Holiday buy/sell, • 5% pension, • 1 Paid professional membership per year, • Cycle to work Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

• MSP Experience Preferred, • Projects / Escalation Experience, • Office BasedSenior IT Engineer - EdinburghIf you're an experienced IT support professional with a background in Managed Service Providers (MSP) looking to advance your career, a thriving IT managed services provider in Edinburgh is seeking a Senior IT Support Engineer to join their team. This role offers excellent progression opportunities and occasional travel across Scotland, along with comprehensive training, support for Microsoft certifications, and ongoing professional development. You'll tackle diverse IT challenges across industries, gaining exposure to cloud platforms, cybersecurity, and advanced networking. The company fosters a friendly, inclusive culture with open communication, direct collaboration with leadership, and recognition for your contributions. Key Responsibilities:- Provide IT Support: Diagnose and resolve escalated support tickets for desktops, laptops, servers, and mobile devices running Windows 11, MacOS, and Microsoft 365. - Project Delivery: Taking part and ownership of IT projects such as new client onboarding, Office 365 migrations, and network installations.- Microsoft Entra / Azure AD Administration: Manage users, groups, access, and support cloud identity issues. - Intune MDM Experience- Customer Service: Deliver friendly, professional support to end-users via phone, email, and on-site.- On-Site Visits: Travel to client offices around Scotland as needed.- Ticket & Documentation Management: Log issues, track progress, and document resolutions.- System Maintenance: Proactively monitor customer systems and remediate alerts.- Continuous Improvement: Contribute to the knowledge base and help refine processes.Essential Qualifications & Experience: - Technical Skills: Windows, Networking, Office 365 Migrations, Intune MDM, SharePoint, Teams, OneDrive, Defender, Sentinel - MSP Experience: Previous experience in an MSP or IT support provider environment.- Right to Work in the UK: Legal authorisation to work in the UK is required.- Troubleshooting: Excellent IT problem-solving skills.- Communication: Outstanding interpersonal skills and fluent written and spoken English.- Team Player: Proven ability to work collaboratively in a small team.- Task Ownership: Organised, self-motivated, and able to manage workload independently.- Certifications/Training: Relevant IT certifications or equivalent knowledge.

Senior Test Development Engineer Location: Glenrothes or Livingston About the role: Responsible for the design, manufacture, verification and validation, along with through life technical support of board level, sub-system and system level test equipment. Skills: • Test software design, • Excellent knowledge of analogue and digital electronic circuit design, • Ability to write comprehensiv... ZIPC1_UKTJ

At Spacelabs Healthcare, we’re committed to transforming healthcare through continuous innovation. Our scalable solutions deliver critical patient data across local and remote systems, enabling clinicians to act with confidence and improving outcomes for patients worldwide. We are seeking a Senior Quality Assurance Engineer who will play a pivotal role in ensuring our medical devices are safe, effective, and compliant. This individual will lead Design Controls, Risk Management, and Quality Management System (QMS) governance throughout the product lifecycle—primarily focusing on design and pre‑market activities. Acting as a trusted partner to R&D and Regulatory Affairs, you will help drive informed decision‑making that safeguards patients while enabling compliant innovation. Key Responsibilities Design & Development Quality Leadership • Champion critical thinking across product development teams throughout all stages of design and development., • Serve as a subject‑matter expert in Design Controls, Risk Management, Electrical Safety, and Usability Engineering., • Ensure all design activities are properly executed, accurately documented, and compliant with internal procedures and global regulatory requirements., • Review Engineering Change Orders (ECOs) and design changes to confirm sound engineering practice and maintained device safety and effectiveness., • Oversee efficient progression of design changes with complete, traceable, and compliant documentation., • Participate in cross‑functional design reviews, assessing design plans, inputs, outputs, V&V evidence, and change records., • Identify potential safety or performance concerns and support appropriate risk management activities., • Ensure design decisions are fully justified, documented, and aligned with regulatory expectations. Risk Management • Contribute to risk management activities in accordance with ISO 14971., • Support hazard analyses, FMEAs, and related risk management documentation., • Ensure risk control measures are implemented, verified, and supported by objective evidence., • Provide structured, risk‑based decision‑making to support product safety and compliance., • Ensure risk–benefit evaluations are complete, clear, and aligned with global regulatory expectations. Material Review Board (Design‑Related) While the role does not oversee manufacturing or service activities, you will: • Participate in design‑related reviews of nonconforming materials and investigations where they impact design decisions, safety, or documentation., • Communicate trends or recurring issues to design teams., • Support corrective actions or design improvements based on nonconformance insights. QMS Administration • Conduct internal quality audits to verify compliance with procedures and regulatory expectations., • Lead or support CAPA activities, ensuring effective verification and complete documentation., • Manage process change control for design‑related processes, ensuring proper evaluation, documentation, and approval., • Support external audits/inspections by representing design‑related quality processes., • Educate internal teams on quality obligations and alignment with the Spacelabs Quality Policy., • Maintain and improve QMS procedures, work instructions, and templates. Qualifications • Bachelor’s degree in Quality, Engineering, or related fields (e.g., Computer/Software, Biomedical, Mechanical, Electrical)., • 7+ years of relevant Quality or Engineering experience., • 5+ years working with medical device regulatory requirements, quality standards, and QMS., • Experience maintaining Technical Files, GSRPCs, Risk Management Files, Usability Files, Design History Files, MVPs, and Change Control documentation., • Experience with statistical analysis., • Knowledge of Software as a Medical Device (SaMD) or software within medical devices., • Experience collaborating with teams under design controls during new product development., • Strong communication skills across all levels of an organization., • Highly self‑motivated, organized, and proactive.

Principal Systems Engineer Edinburgh OR Newcastle – fully onsite 12-month contract Paying up to £70p/h (Inside IR35) Role overview: Our client is looking for an experienced Systems Engineer to contribute to the continued development of an in-service radar system by supporting the planning and analysis of radar trials (rig-based and flight trials). Key Responsibilities: • Work with large datasets from rig and flight trials, and use analytical techniques to evaluate radar performance against requirements and raise Systems Problem Reports (SPR) for detailed investigation., • Apply signal processing, image processing, and object classification techniques to extract actionable insights., • Investigate system anomalies using real trial data, ensuring performance meets specifications., • Work collaboratively with multidisciplinary teams to develop and prototype cutting-edge defence solutions., • Contribute to System Verification & Validation (V&V) activities as part of the continuous development/enhancement of the Radar System. Required Skillset: • Strong experience with MATLAB, particularly for use in the analysis of large data sets., • Full V-model lifecycle experience, with an emphasis on the middle to right side (implementation, integration, testing, and V&V)., • Experience in safety-critical systems., • An understanding of radar or complex sensor systems would be beneficial.

Sapien Engineering are looking for a Senior RF/Microwave Engineer to join a global engineering consultancy on a contract basis. The role is within the Aerospace/Defence industry. The role supports hybrid working with 3 days a week required on site in Edinburgh. This is a 12-month contract, inside IR35 paying up to £74 per hour. Job requirements: • RF/Microwave PCB Design, • Microwave Power Amplifier Design, • Circuit Modelling and Simulation, • Full Lifecycle Circuit Design, • Sub-System Design, • Testing + Debugging Designs Please note all applicants must be eligible for full, unrestricted SC clearance. For more information, please apply with an updated copy of your CV ASAP.

Senior / Principal RF Engineer Edinburgh HQ (Hybrid remote) SC Clearance is essential £65 p/h Inside IR35 A leading Defence prime are currently seeking a Senior/Principal RF Engineer on a contract basis to join a world-class defence technology organisation working on cutting-edge radar and surveillance systems used in advanced aerospace platforms. This is an exciting opportunity to work on next-generation RF and microwave technologies, contributing to sophisticated radar systems and advanced sensing solutions. Key skills • Microwave PCB materials and design techniques, • Degree educated (BSc, BEng, MEng, MSc, PhD, EngD) in Electrical/Electronic Engineering or related science, • RF / Microwave subsystem design, • Microwave design tools (e.g. AWR, ADS, SystemVue, VSS, MATLAB), • EM simulation tools (e.g. CST), • GaAs / GaN MMIC design and applications, • RF synthesiser design (DDS / PLL technologies) The Opportunity As an RF / Microwave Engineer, you will play a key role in the design and development of multifunctional RF systems, from concept through to production. You will work alongside multidisciplinary teams solving complex engineering challenges on advanced defence platforms. Key Responsibilities • Lead and support the full hardware lifecycle – from system concept and detailed design to prototyping, test, verification, integration and production support, • Develop RF PCB and module designs using the latest microwave technologies, • Conduct design reviews, produce high-quality technical documentation and maintain configuration control, • Design and develop test prototypes to validate RF designs and support verification activities, • Capture requirements and carry out detailed design activities through to verification, • Prepare manufacturing data packs and provide technical support to production and subcontractors, • Collaborate with systems, electronics and test engineers to resolve integration challenges on advanced systems

Join a cutting-edge verification team in Edinburgh, working on state-of-the-art automotive power ICs and embedded SoCs in a hybrid, innovative environment. Job Title: Senior Digital Verification Engineer Location: Edinburgh, Scotland (Hybrid) Salary: Negotiable and competitive The Opportunity We are seeking a Senior Digital Verification Engineer to join our Design Centre in Edinburgh. You will be part of a new verification team working on gate-driver ICs and embedded SoCs for advanced automotive power applications. This is an exciting chance to work on state-of-the-art microelectronics in a collaborative, innovative environment. Key Responsibilities • Develop verification plans from microarchitecture specifications, • Create and maintain SystemVerilog/UVM verification environments, • Define and execute test plans, UVM-SV test environments, and functional coverage, • Analyze results, enhance coverage, and debug unexpected behavior, • Run and maintain regression suites, • Lead or participate in verification reviews, • Collaborate with System Engineering on requirements, • Build mixed-signal testbenches, checkers, and bus-functional models, • Apply constrained random verification methodologies, • Track deliverables and ensure on-time, high-quality execution Qualifications & Experience • Bachelor’s or higher in Electrical/Electronic Engineering (or equivalent), • Strong experience in SystemVerilog, UVM/OVM, Specman, Verilog, C/C++, ASM, TCL/TK, Python, • Knowledge of embedded SoC design and verification lifecycle, • Familiarity with CPU, memory, and I/O microarchitectures, • Experience with mixed-signal testbenches, behavioral models, constrained random verification, and bus-functional model development, • Ability to define tasks, track progress, and deliver quality results Skills & Attributes • Strong analytical and debugging skills, • Detail-oriented and quality-focused, • Collaborative, team-oriented, with strong communication skills If you are interested, please reach out to have a conversation and share your CV at

Sapien Engineering are looking for a Senior RF/Microwave Engineer to join a global engineering consultancy on a permanent basis. The role is within the Aerospace/Defence industry. The role supports hybrid working with 3 days a week required on site in Edinburgh. The role is paying circa £80,000pa + benefits. Job requirements: • RF/Microwave PCB Design, • Microwave Power Amplifier Design, • Circuit Modelling and Simulation, • Full Lifecycle Circuit Design, • Sub-System Design, • Testing + Debugging Designs Please note all applicants must be eligible for full, unrestricted SC clearance. For more information, please apply with an updated copy of your CV or email

GENERAL DESCRIPTION Ocean Winds is looking for a Project Engineer with a solid technical background in infrastructure / networks projects within the power / energy sector to coordinate design and optimisation activities for the electricity transmission assets for the Caledonia Offshore Wind Farm project. In accordance with the UK offshore transmission regime, Caledonia Offshore Wind Farm intends to construct the transmission assets that will connect the Project to the national electricity transmission system. Reporting to the Senior Transmission Infrastructure Project Manager, the Project Engineer will be a key member of the engineering team, working across all transmission infrastructure technical packages and taking a leading role in developing and implementing the engineering strategy for the Caledonia transmission assets, providing support to leasing and consenting/permitting processes while defining and refining the project from a technical perspective. MAIN ACCOUNTABILITIES • Support the Head of Engineering and Senior Transmission Infrastructure PM in multi-disciplinary design and optimisation activities related to delivery of the engineering strategy and development of the consented design envelope including site characterisation, infrastructure layout onshore and offshore export routing, civils and substation design, technology and equipment selection and construction processes., • Support project leasing and consenting/permitting processes by providing input on engineering and technical matters such as anticipated design parameters and construction methods., • Support development of the design programme to define and refine project design envelope by review and optimisation of inputs. (e.g. design parameters, construction methods, etc.)., • Ensure onshore civil design work undertaken for the project is undertaken using appropriate methods and is confirmed to be in accordance with applicable standards and project requirements., • Liaison with the project’s development team, landowners and other stakeholders in relation to the planning consents and land agreements required to enable successful completion of the works., • Input to best practice strategy / methodology, identify design constraints and targets, engineering cost modelling activities (e.g. design studies and optimisation exercises), technical reviews, and identifying key design levers., • Identify the need for specialist internal and external technical support. Working with the commercial team, manage the technical aspects of procurement of specialist engineering, including drafting work scopes and technical assessment of proposals., • Working with commercial team, engage with the manufacturing/construction supply chain in connection with the project, including preparing EPCI tender documentation such as scope of works and technical specifications for work packages and undertaking or coordinating technical assessment of proposals., • Manage internal and external specialist technical support to ensure project requirements are delivered on time and to budget. This includes review of desktop studies, concept designs, site surveys., • Support the preparation of engineering execution plans, risk registers and lead engagement with technical stakeholders., • Ensure appropriate technical governance are put in place and managed, including:, • Development of a technical risk register that will be linked to the consenting risk register., • Implementation of design decision and change control processes., • Support the company’s work in monitoring technology development, as well as engage in regulatory matters associated with the development and construction of offshore wind farm transmission assets., • Adherence to all project governance documents, policies, processes and procedures., • Work closely with Project Controls to develop and assess construction programme scenarios and support the development of construction and operational cost estimates for the project., • Work closely with Ocean Winds Corporate functions and other UK project teams, to maximise opportunities to de-risk consenting, construction and operational activities and capture corporate procedures, lessons learnt and transfer of knowledge. ACADEMIC & PROFESSIONAL EXPERIENCE • A degree in a relevant engineering discipline is required, preference for civil engineering., • A minimum of 3 years’ experience within the power / energy sector is required., • Team player with excellent interpersonal and communication skills. KNOWLEDGE • Knowledge of one or more of the following: design, construction and commissioning of high voltage substations; design, construction and commissioning of high voltage cable systems; power generation and transmission systems, planning and consenting processes for transmission assets., • Understanding of the interfaces and interdependencies between the key onshore and offshore components of a wind farm and transmission system., • Understanding of the different processes and stakeholders involved in the development and construction of the transmission assets for an offshore wind farm project., • The CDM (Construction Design and Management) Regulations, including a demonstrable understanding of health, safety and environmental best practice., • Onshore electricity transmission asset civil design standards and methods. SKILLS • Ability to work in a dynamic environment in a multi-disciplinary team across several technical areas and organizational structures., • Organized and efficient with an ability to multi-task and work to challenging deadlines., • Ability to communicate across all levels of an international organisation., • High standard of report writing and presentation skills., • Enthusiastic, committed and self-motivated with long term ambitions in the offshore wind industry. OTHER REQUIREMENTS Location in Edinburgh but travelling may be required to supplier's facilities and offices, local ports, and construction sites. This may include occasional international travel. The project has an international team of employees, and the working language is English. Candidates need to be fluent in English both spoken and written. Proficiency in other languages will be valued. EQUAL OPPORTUNITY STATEMENT At Ocean Winds, we celebrate all the differences that make individuals unique. We are building a diverse energy workforce, where differences in every form (culture, background, ability, or lived experience) are valued by all, bringing greater perspectives, ideas, and knowledge. You might not meet every single requirement listed. But, If this role speaks to you, we encourage you to apply. Potential and passion can be just as important as past titles. We are proud to be a diverse and inclusive team where everyone is welcome, and we’re committed to making our hiring process as open and supportive as possible. If you need any adjustments or accommodations during the process, please don’t hesitate to let us know. We’ll do everything to help. Please feel free to reach out by contacting the ‘Job Poster’ for the same. By selecting “Apply” above, you indicate: You have read and acknowledge OW Candidates Privacy Notice: ..

Senior Test Development Engineer Frontier Resourcing are working with a leading defence and national security company, giving you the opportunity to work within cutting edge technologies. You will be responsible for the design, manufacture, verification, validation, and lifecycle support of electronic test equipment at board, sub-system, and system level. With a focus on R&D and cutting-edge technologies, this is a fantastic opportunity for you to hone and develop your technical knowledge. The role • Create test solutions - Design and develop functional test equipment for electronic systems, • Lead and support hardware/software integration and troubleshooting, • Provide lifecycle and production support, including issue resolution and obsolescence management, • Collaborate across engineering disciplines to develop robust, scalable test solutions, • Lead design reviews and documentation to the highest standards Experience • Test development experience – creating test solutions, not just running test programmes, • Excellent knowledge of analogue and digital electronic circuit design., • Ability to write comprehensive technical design documentation., • Proven experience in handover and management of designs in production., • Excellent hardware troubleshooting skills., • Able to support/debug system integration, • Test software design experience. Desirable Experience • Use of Mentor Graphics schematic entry and PCB layout tools., • Understanding of common test architectures PXI/d LXI, • Measurement Uncertainty and its application in test equipment design and validation, • Software Certification or detailed knowledge of: NI LabView, NI CVI, NI TestStand, C#, • Design of mix signal circuits To be eligible for this role you will need to undergo BPSS clearance which requires 3 years UK residency and references. This role is working in a Test Lab so onsite working is required. Working a condensed week, working full-time hours across 4 days (Monday to Thursday), giving you a long 3-day weekend.

Senior RF Engineer Edinburgh 12-month contract Paying up to £80p/h (Inside IR35) The Opportunity Our client is looking for Senior RF Engineer’s to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft, as well as advanced maritime and airborne surveillance platforms. Key Responsibilities • As an RF/Microwave Engineer, you will:, • Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration and production support., • Develop high-quality RF PCB and module designs using modern microwave technologies., • Create test prototypes to validate and verify designs., • Carry out detailed design activities from requirements capture through to verification., • Produce and maintain clear technical documentation and reports under configuration management., • Prepare manufacturing data packs and support subcontractors and manufacturing teams., • Work closely with systems, electronics and test engineers to resolve complex integration challenges., • Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience • Hold a degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered., • Microwave PCB materials and RF design techniques, • RF/Microwave subsystem design, • Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB), • EM simulation techniques (2D/3D), e.g. CST, • GaAs/GaN MMIC design and applications, • RF synthesiser design (DDS and PLL technologies), • RF downconverter and digitiser design, • Passive microwave structure design, • Non-linear circuit simulation, • PCB schematic capture tools (e.g. Mentor), • RF laboratory measurements (signal generators, spectrum analysers, vector network analysers), • Requirements capture and technical report writing, • Design for manufacture and cost

Principal Firmware Engineer Edinburgh 12-month contract Paying up to £75p/h (inside IR35) The Opportunity We are seeking a Senior or Principal Firmware Engineer to join a high-performing engineering team delivering advanced digital systems within the Aerospace, Defence, and Security sector. At Senior or Principal level, you will also provide technical leadership, supporting the delivery of work across multiple engineers while contributing to process improvement and best practice development across FPGA/Firmware teams. Key Responsibilities • Design and develop innovative VHDL-based FPGA architectures, • Apply advanced verification techniques using VHDL or SystemVerilog / UVM, • Work with currentFPGA technologies from:, • Xilinx, • Intel (Altera), • Microsemi (semiconductor manufacturer), • Develop and integrate high-speed interfaces, including PCIe, DDR3, Ethernet and JESD, • Analyse system-level documentation to derive detailed firmware requirements, • Adopt a structured, methodical approach to the full firmware lifecycle, ideally aligned with standards such as RTCA DO-254 or similar, • Specify complex timing and area constraints for efficient FPGA place and route, • Debug firmware designs and support system verification and integration activities, • Contribute to process enhancements and ways of working across engineering teams, • Considerable experience designing firmware architecture using FPGA technologies, • Strong hands-on experience with Xilinx, Intel (Altera), or Microsemi toolchains, • Experience with fast interfaces such as PCIe, Ethernet, DDR3, JESD, • Advanced verification experience using VHDL or System Verilog / UVM, • Proven ability to derive detailed firmware requirements from system-level specifications, • Experience working within structured firmware processes (e.g., DO-254), • Excellent analytical and problem-solving capability, • Familiarity with Model-Based Engineering using:, • MATLAB, • Simulink This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Principal Firmware Engineer Edinburgh 12-month contract Paying up to £75p/h (inside IR35) The Opportunity We are seeking a Senior or Principal Firmware Engineer to join a high-performing engineering team delivering advanced digital systems within the Aerospace, Defence, and Security sector. At Senior or Principal level, you will also provide technical leadership, supporting the delivery of work across multiple engineers while contributing to process improvement and best practice development across FPGA/Firmware teams. Key Responsibilities Design and develop innovative VHDL-based FPGA architectures Apply advanced verification techniques using VHDL or SystemVerilog / UVM Work with currentFPGA technologies from: Xilinx Intel (Altera) Microsemi (semiconductor manufacturer) Develop and integrate high-speed interfaces, including PCIe, DDR3, Ethernet and JESD Analyse system-level documentation to derive detailed firmware requirements Adopt a structured, methodical approach to the full firmware lifecycle, ideally aligned with standards such as RTCA DO-254 or similar Specify complex timing and area constraints for efficient FPGA place and route Debug firmware designs and support system verification and integration activities Contribute to process enhancements and ways of working across engineering teams Communicate effectively within multidisciplinary teams and stakeholders Essential Skills & Experience Con...

Sapien Engineering are looking for a Senior RF/Microwave Engineer to join a global engineering consultancy on a contract basis. The role is within the Aerospace/Defence industry. The role supports hybrid working with 3 days a week required on site in Edinburgh. This is a 12-month contract, inside IR35 paying up to £74 per hour. Job requirements: * RF/Microwave PCB Design * Microwave Power Amplifier Design * Circuit Modelling and Simulation * Full Lifecycle Circuit Design * Sub-System Design * Testing + Debugging Designs Please note all applicants must be eligible for full, unrestricted SC clearance. For more information, please apply with an updated copy of your CV ASAP...

Senior Test Development Engineer Location: Edinburgh Salary: Up to £70,000 + £7,500 Welcome Bonus Security Clearance: Must be eligible for BPSS (SC desirable) Type: Permanent | Full-Time The Opportunity An established and growing advanced engineering organisation is seeking a Senior Test Development Engineer to support the design and development of complex electronic test solutions. This is a key senior role within a high-growth R&D environment, offering strong technical ownership, leadership responsibility, and genuine progression opportunities. You will be working on advanced electronic systems supporting mission-critical applications across land, sea, air, and space platforms. The Role You will take ownership of the design, development, validation and lifecycle support of test equipment at board, subsystem and system level. Key responsibilities include: Design and development of functional test equipment for electronic systems Hardware and software integration, debug and fault finding Verification and validation of test solutions Production support, issue resolution and obsolescence management Leading technical design reviews and producing high-quality documentation Mentoring and supporting junior engineers ...

💼 Senior Embedded Software Engineer 📍 Location: Edinburgh | 🏢 Employment: Permanent | 🖥 Working: On-site 💰 Salary: Flexible — tailored around the right candidate About the Role Join a leading engineering & technology company driving next-gen high-performance products. You'll take ownership of embedded Linux systems and low-level C software, from concept to production, shaping platform architecture and ensuring robust performance across demanding environments. 🚀 What You'll Do • Write production-quality Embedded C for device drivers, board support packages, and system components, • Develop and optimise software on embedded Linux platforms, • Contribute to C++/Python tooling, automation, and applications, • Bring up, debug, and validate software on target hardware using oscilloscopes, logic analysers, and lab equipment, • Collaborate with hardware & firmware teams for smooth integration and early issue resolution, • Drive improvements in software architecture, processes, and documentation 🛠 What We're Looking For, • Strong experience in Embedded C and embedded Linux development, • Proven low-level programming and ha...

BAE Systems Job Type: Contract Job Title: Senior Electrical Engineer Location: Portsmouth, Cowes or Great Baddow Hourly Rate: £60.63 PAYE OR £81.90 Umbrella inside IR35 Duration: 6 months Working Arrangements: 37hrs, 4 days on-site per week Role Overview BAE Systems are requiring a Senior Electrical Engineer with ACDC distribution system, EMC management and verification, and testing experience to assist with generating component level electronic designs for introduction into volume. Required Experience • ACDC Distribution system experience, • EMC management and verification experience, • Testing experience, • Knowledge of Generating component level design JBRP1_UKTJ

Lead Electrical Design Engineer Abercorn Sinclair is delighted to partner with Stanelco RF Technologies as they seek to appoint an experienced Lead Electrical Design Engineer. Benefits: • Holidays:2527days+8bankholidays, • Pension:6%EmployerContribution, • WorkingHours:Flexiblestart/finisharoundcorehourswith1/2dayFriday., • LifeAssurance Based in Marchwood, Southampton, Stanelco RF Technologies (Stanelco) is a division of Biome Technologies plc. Stanelcos small, multidisciplinary team specialises in the design and manufacture of bespoke engineering solutions for a wide range of industries utilising induction heating and dielectric welding systems. With a strong focus on high-frequency RF technologies, projects typically range from £50k to £500k+ and include RF heating systems, electrical and electronic control systems, and integrated mechanical handling solutionsfor the Medical, Industrial and Nuclear sectors. Delivery timelines vary from 3 to 12 months, covering the full process from project acquisition through to commissioning and compliance. The Role Reporting to the Head of Engineering, the successful candidate will operate as a key member of a multi-disciplinary engineering team, delivering technically robust, safe, and compliant solutions to Stanelcos global customer base. You will act as the technical authority for electrical and electronic aspects of projects, working with cross-functional teams to define architectures, requirements, and specifications. While Stanelco works extensively with RF-based technologies, prior experience in RF design is not a prerequisite for this role. The company has deep internal expertise in this area and is committed to supporting the successful candidate in developing RF knowledge and design capability over time. The role includes periodic UK and international travel to commission new systems and support existing installations. Why Join Stanelco Work on complex bespoke engineering systems, not volume products Join a highly experienced multidisciplinary team in a technically collaborative environment Opportunity to develop RF and high-frequency power expertise within a supportive team Candidate Profile Given the size and nature of the business, this role offers some flexibility and can be tailored to the skills and experience of the successful candidate. We welcome applications from experienced Engineer /Senior Engineer/ Lead Engineers who can provide authoritative leadership across electrical and electronic design, safety, and compliance. Ideally, you will be educated to Degree level (or equivalent) in Electrical / Electronic Engineering, with several years demonstrable experience in the development of industrial or process-based equipment. You will be a natural problem-solver, comfortable operating in a hands-on, project-driven engineering environment. Key Design Responsibilities • Play an instrumental role in the design, development, manufacture, and support of industrial RF and electro-mechanical process equipment., • Lead electrical team technical activities and ensure rigorous delivery to project requirements., • Lead electrical and electronic design activities through concept, development, verification, and release., • Drive innovation by troubleshooting existing products, optimising designs, and evaluating new technologies for future product development., • Electrical and electronic systems engineering, including power conversion, transformers, switches, converters, SMPS., • Electrical and electronic system architecture and requirements definition., • Industrial automation, electronic control systems, and industrial software., • Control panel design (PLC, HMI, SCADA)., • Exposure to RF Systems, power electronics, induction heating, or dielectric welding., • Experience acting as a technical authority and developing junior engineers., • Own or contribute significantly to CE marking activities related to electrical and electronic design., • Support new business proposals at quotation and negotiation stages, providing technical input and risk assessment., • Work closely with the Head of Engineering and Mechanical Engineering Team to ensure alignment and integrated product delivery. This is a rare opportunity to play a critical technical role within a highly specialised engineering company with a global reach, influencing technical direction, product safety and compliance, and long-term engineering capability while working on challenging, bespoke solutions. Importantly, the role also offers the opportunity to develop expertise in RF technologies within a supportive and collaborative engineering environment. Compensation & Benefits A competitive base salary, commensurate with experience, plus an attractive benefits package. About Abercorn Sinclair Abercorn Sinclair is a specialist technical recruitment consultancy based in Edinburgh, providing bespoke talent solutions to innovative engineering and technology-led businesses. JBRP1_UKTJ

Principal Firmware Engineer Edinburgh 12-month contract Paying up to £90p/h (inside IR35) The Opportunity We are seeking a Senior or Principal Firmware Engineer to join a high-performing engineering team delivering advanced digital systems within the Aerospace, Defence, and Security sector. At Senior or Principal level, you will also provide technical leadership, supporting the delivery of work across multiple engineers while contributing to process improvement and best practice development across FPGA/Firmware teams. Key Responsibilities • Design and develop innovative VHDL-based FPGA architectures, • Apply advanced verification techniques using VHDL or SystemVerilog / UVM, • Work with current FPGA technologies from:, • Xilinx, • Intel (Altera), • Microsemi (semiconductor manufacturer), • Develop and integrate high-speed interfaces, including PCIe, DDR3, Ethernet and JESD, • Analyse system-level documentation to derive detailed firmware requirements, • Adopt a structured, methodical approach to the full firmware lifecycle, ideally aligned with standards such as RTCA DO-254 or similar, • Specify complex timing and area constraints for efficient FPGA place and route, • Debug firmware designs and support system verification and integration activities, • Contribute to process enhancements and ways of working across engineering teams, • Communicate effectively within multidisciplinary teams and stakeholders Essential Skills & Experience • Considerable experience designing firmware architecture using FPGA technologies, • Strong hands-on experience with Xilinx, Intel (Altera), or Microsemi toolchains, • Experience with fast interfaces such as PCIe, Ethernet, DDR3, JESD, • Advanced verification experience using VHDL or System Verilog / UVM, • Proven ability to derive detailed firmware requirements from system-level specifications, • Experience working within structured firmware processes (e.g., DO-254), • Excellent analytical and problem-solving capability, • Strong communication skills and a collaborative working style Desirable • Familiarity with Model-Based Engineering using:, • MATLAB, • Simulink, • Experience leading or mentoring engineers (for Principal level)

FPGA Engineer 12-month initial contract Onsite full time in Edinburgh £75ph, UMB, inside IR35 SC will be required for this position due to the nature of work. Our client are looking for a Firmware Engineer at Senior or Principal Level to join their team in Edinburgh. The client is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, they employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Their employees are not just part of a team, they are key contributors to shaping innovation, advancing technology, and enhancing global safety. As an experienced Firmware/FPGA Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. You will use or develop team leading experience to support the delivery of work from several engineers. Your expertise will also be key to enhance processes and ways of working across UK wide FPGA/Firmware delivery teams. Creating innovative VHDL based FPGA designs Advanced verification techniques using either VHDL or SystemVerilog / UVM Current FPGA technologies from either Xilinx, Altera or Microsemi and their tools Model Driven Engineering tools including MATLAB and Simulink High Speed Interface Design & Integration, including PCIe, DDR3, Ethernet Analysing system level documents and deriving detailed Firmware require...

Missile Test Architect Test Equipment & Systems (Defence)Location: Bolton, Greater ManchesterSector: Defence / Advanced Manufacturing As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Missile Test Architect to support the delivery of advanced missile systems. This role is ideal for accomplished test equipment engineers ready to progress into system and sub-system leadership, influencing complex programmes from concept through in-service support. You will own the end-to-end test equipment strategy, shaping test architectures, managing requirements, and overseeing development through delivery and operational use. Reporting to the Chief Design Engineer, you will act as the technical authority within multidisciplinary engineering teams, helping define built-in test capability, production testing requirements, and the specification and delivery of missile test equipment. Key Responsibilities • Define and implement the overall project test strategy, • Define and implement Built-In Test (BIT) architecture, including coverage requirements, timings, and system-level routines, • Specify missile factory pass-out testing to ensure correct build and support manufacturing with effective test stages, • Define in-service test routines for missile systems, • Generate and manage compliance to lower-level test requirements for design teams, including:, • Test access requirements, • BIT coverage and timings, • Factory test functionality, • Analyse and model systems to understand test coverage and generate diagnostic instructions, • Propose and recommend cost versus test-coverage trade-offs in collaboration with the Chief Design Engineer, • Produce, maintain, and deliver plans for activities within your area of responsibility, • Degree qualified in Electrical, Electronic, or Test Engineering or equivalent industry experience, • Substantial experience in test equipment, test systems, or test architectureStrong technical background in:, • Digital electronics and microprocessor-based systems, • Analogue electronics, • Power electronics, • Proven experience in test equipment design, • Experience using DOORS for requirements management, • Experience within defence, aerospace, or other highly regulated engineering environments, • Exposure to system-level or sub-system leadership roles, • Good understanding of project management, planning, cost, and budget control, • Ability to manage diverse and sometimes conflicting stakeholder requirements, • Strong influencing skills with engineers, managers, and senior stakeholders, • Capability to technically manage internal teams and external suppliers, • Determination, resilience, and a strong drive to deliver JBRP1_UKTJ

Mobile Senior Air Conditioning Engineer - North West - National HVAC Contractor: Commercial CBW Staffing Solutions have an exciting role to join a growing Air Conditioning & Mechanical Engineering specialist who is looking to expand their operation due to the acquisition of a contract and bring in a specialised commercial Senior Air Conditioning Engineer to supply this service to the existing portfolio of clients in the North West of England. This is a mobile position and all of the sites are based in Manchester, Liverpool and Blackpool - with some travel to sites in Leeds and Sheffield. Package: • Competitive salary between £40,000 - £46,000 per annum (depending on, • experience), • Quarterly bonus for achieved objectives based on achievable targets, • Van & fuel card supplied, • Working hours between Monday - Friday, 40 hours per week, • 25 days holiday package plus bank holidays, • Generous workplace pension scheme, • Overtime available on requestResponsibilities:, • Maintain, service and troubleshoot a variety of air conditioning systems, including, • split systems, VRV/VRF systems, and chillers, • Perform routine maintenance tasks, such as cleaning coils, replacing filters, moving, • parts, to prolong the lifespan of HVAC equipment, • Diagnose and repair mechanical and electrical faults in air conditioning units,, • ensuring minimal downtime and maximum efficiency, • Conduct inspections and assessments of HVAC systems to identify potential issues, • and recommend appropriate solutions, • Collaborate with other maintenance personnel and contractors to coordinate complex, • repairs and system upgrades, • Adhere to safety protocols and industry regulations to promote a safe working, • environmentRequirements:, • Proven experience as an Air Conditioning Engineer or similar role within the facilities, • management industry - minimum of 5 years, • Hold your F-Gas Cat 1 Regulations certification, • Full UK driving licence, • Strong working knowledge of leading manufacturer systems (Daikin, Mitsubishi,, • Panasonic, etc.), • Familiarity with refrigeration principles and equipment, • Proficiency in diagnosing and troubleshooting mechanical and electrical faults, • Excellent problem-solving skills and attention to detail JBRP1_UKTJ

Security Engineer (Field Based / Access Control) £45,000 - £50,000 + Door-to-Door Pay + £60k-£65k OTE + Travel Expenses Paid + Training + Progression + Company Benefits + Enhanced Holidays + Company Vehicle Surrey UK Travel + Occasional Mainland Europe Are you an experienced Security Systems Engineer looking to step into a supervisory role, with a clear pathway toward management and the opportunity to work on high-profile projects across the UK and mainland Europe? On offer is the chance to join a growing security systems specialist where you will play a key role in the delivery of complex commercial installations, while mentoring junior engineers and supporting project delivery on site. You will work closely with the Project Manager to ensure installations are completed to a high standard, on time and to specification. You will be working with blue-chip and high-profile commercial clients who demand exceptional workmanship and attention to detail. This is a varied, hands-on role combining installation, supervision, fault-finding, and technical support, with extensive travel required across the UK and occasional work in mainland Europe. This role would suit a senior engineer ready to take the next step into leadership, looking for responsibility, progression, and exposure to technically interesting projects. The Role: • Install commercial security systems to a high standard on client sites, • Supervise on-site works and support the Project Manager with coordination and delivery, • Mentor and support junior engineers and trainees, promoting best practices, • Carry out system fault-finding, troubleshooting, and reactive maintenance when required, • Provide technical support and ensure compliance with site, safety, and quality standards, • Experience in a Security Systems Engineer role, • Full UK driving licence Keywords: Security Engineer, Field Installation Engineer, Security Systems Engineer, Security Supervisor, Access Control, CCTV, Commercial Security, Galaxy, Lenel, Milestone, Gallagher, UK Travel, Europe Travel Reference Number: BBBH24462 We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Job Title: Senior Systems Engineer Location: Portsdown Technology Park, Portsmouth, Hybrid, 3 days per week on site We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: Circa £56,000 Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. What youll be doing: Youll take ownership and accountability for task allocation and provide Engineering support to the Tools and Tech Lead to enable suitable planning. Youll collaborate within the team to undertake System and Tools troubleshooting and maintenance, update software and network configuration as required. Youll support and own the generation and execution of requirements, design, testing and deployment of Systems and Tools Youll manage and support System and Software Bugs and collaborate with subcontractors and partners to conduct system updates and provide technical guidance to end users. Youll support Engineering Lifecycle activities, including technical reviews, verification and approval of engineering technical design and documentation. Core duties: • Youll bring good experience and knowledge in application of Network, Virtual Machines, Systems and Software-based products, • Youll have some experience of supporting Configuration Management, • Youll demonstrate a good understanding and applied experience of the Engineering / System lifecycle This is an opportunity for you to join a collaborative team, working across a range of internal and external stakeholders, from customers to nations, within a dynamic and broad scope of work where no two days are the same. There is a wide range of environments and projects in various stages of work, from early stage de risking and experimentation work to full integration a project team onto an infrastructure (physical or virtual) to conduct real live trials. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AG1 #LI-Hybrid JBRP1_UKTJ

RF Engineer Location: Edinburgh Working Pattern: 90% onsite Contract Length: 6 months IR35: Inside IR35 Rate: £65p/h PAYE (£74.45p/h inc. holiday rate) OR £88.63p/h Umbrella We seek an engineer who has worked in a military / defence environment / industry within the last 12 months Role Overview We are seeking an experienced Senior or Principal RF Engineer to support the design and development of advanced RF and microwave hardware within a leading defence technology environment. The successful candidate will work across the full hardware lifecycle, from system concept and detailed design through prototyping, verification, integration, and production support. This role involves developing high-performance RF PCB and module designs while collaborating with multidisciplinary engineering teams to solve complex integration challenges. Key Responsibilities • Deliver RF and microwave hardware designs across the full product lifecycle. • Develop multifunctional RF PCB and module designs using modern RF technologies. • Capture requirements and perform detailed circuit design, simulation, and verification. • Design and implement test prototypes and validation activities for RF hardware. • Conduct design reviews and produce high-quality technical documentation. • Prepare manufacturing data packs and support production and subcontract engineering activities. • Collaborate with systems, electronics, and test engineers to resolve integration issues. • Debug and diagnose issues in RF hardware and test equipment. Knowledge & Experience Essential • 5+ years' experience in RF / microwave circuit design and analysis. • Strong understanding of microwave engineering principles and electromagnetic theory. • Experience using RF test equipment, including network analysers, spectrum analysers, and RF sources. • Proficiency with RF design and simulation tools such as ADS, AWR, CST, HFSS, or Mentor. • Ability to debug failing RF hardware or test systems. Desirable • Microwave PCB materials and RF layout techniques. • RF subsystem or synthesiser design (DDS / PLL). • GaAs / GaN MMIC applications. • RF down-converter or digitiser design. • Experience with EM simulation and modelling. • Knowledge of RF lab measurement techniques including vector network analysis. TPBN1_UKTJ

Job Title: Senior Mechanical Engineer Location: Portsmouth Naval Base working a hybrid pattern We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £46,000 dependent on experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. Role description: As a Senior Mechanical Engineer, you will deliver key WTA (Warship Technical Authority) service elements across platform systems, including design change, technical assurance, material state and obsolescence management, specialist engineering support, and future support or transformation planning. Core duties: • Providing mechanical engineering support across diverse platform systems, equipment, and critical marine services, • Delivering engineering input to multiple projects, including CSM platforms and international naval programmes, • Working with internal teams and external stakeholders to clarify and manage platform system requirements, • Maintaining systems design integrity across varied engineering contexts, classes, and programme deployments, • Supporting investigations, impact assessments and integration analyses to enable evidence-based technical decisions, • You hold broad knowledge of complex platform systems across UK and international markets, • You will have a good understanding of applicable industry standards and the ability to operate effectively within CSM, LCM, and other governance and assurance frameworks, • You will have the ability to apply mechanical engineering knowledge quickly and confidently to a wide range of platform and projects across multiple platform systems and sub-systems and equipments, • You will be an experienced professional engineer at CEng level or equivalent level of capability This role sits within the Warship Technical Authority (WTA) Service Hub, part of the Asset Management team within Warship Support, delivering whole ship, systems and equipment engineering expertise and change management to ensure safe, assured and high-quality support across Warship Support programmes. The Asset Management Team already supports QEC, T45, T23, HUNT, OPV and intentional navies. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 8th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-JP1 #LI-Hybrid JBRP1_UKTJ

The Client Catalyst is delighted to be once more supporting a key client in the electrification technology sector in their recruitment of a Senior Validation Engineer to be based from their Tyneside HQ. My client is a global leader in their field and is undergoing an exciting period of change. The Role Reporting to the Electrical Engineering Lead, the Senior Validation Engineer will be responsible forthe offering of engineering support to the NPD process and team.The Senior Validation Engineer will be responsible for the specification, test, validation and qualification of newly developed power electronic devicesagainst their regulatory requirements and ultimately gain their accredited certification. Main Responsibilities This role will involve working closely with the hardware, software, mechanical and system engineering teams, as well as project management and product/quality management. You will be responsible for creating and following a New Product Integration Validation and Verification test plan, helping create validation test criteria/procedures, identifying, specifying and creating any necessary test environment, test and troubleshoot electronic assemblies, components and circuits. Perform and document a full suite of tests (cross referencing the specification requirements) and independently determining compliance or not. Identifying and managing risks, making sound judgments about quality and feeding into the teams decision to the release of product or a change to an existing product. Read, understand, keep updated on all regulatory standards relevant to our product ranges and desired applications. In particular but not exclusively: EMC standards, Electrical safety and Functional safety standards and UL/CSA. Extract the key requirements specific for our products and set them out as development requirements to design and test our products against Understand the regulatory test methods/conditions and create test cases (descriptions/procedures, equipment, wiring looms, loads etc.) to be performed on our products Create test plans for when compliance de-risk testing needs performing within the product development cycle and to what level (pre-compliance or full). Organize and pull together all equipment, loads, wiring etc. needed to perform the tests. Set up and perform the testing (in house for pre-compliance work, or at external test house for final full compliance accreditation). Willingness to travel is essential and will be required occasionally for final full compliance testing when using an external test house (most tests we can do in house to a pre-compliance level) Capture all of the results and create traceability reports, determining pass/fail status Liaise with external test houses and/or approval bodies to discuss/plan and quote blocks of compliance testing. Commission, Debug electronic circuits, components and PCB assemblies for new product development and sustaining projects. Design, setup and run tests to ensure the design meets specifications. Maintain records and documentation on all tests and analysis. Use industry standard development systems to achieve traceability and cross referencing for V&V. Work within a small design team to complete assigned objectives. Troubleshoot circuits from prototypes, development, and customer returns. Be the key interface for overall system (HW,SW,ME) for validation and alignment on test plan, priorities and execution. Work with Engineering to improve checklist of verification and validation tests and to define criteria for entry into Validation phase. Identify and resolve validation blockers. Drive closure of issues/findings. Establish a disciplined reporting and communication dashboard of project risks & status with respect to quality and readiness for release. Improve the scope and coverage of automated tests Augment the validation lab and life test capability and process Perform change validation before ECN/ECO release This is a broad ranging role requiring some desk and IT work (planning, researching, writing test procedures documenting test reports etc.) as well as practical hands-on engineering, building test bench set ups, adapting and modifying metalwork, cables, electronics, loads, operating test equipment, commissioning, debugging and repairing test units etc.) About you To be considered for the role, it is essential that you are an experienced electronics test/product validation engineering professional with demonstrable experience and in-depth knowledge of regulatory standards and test methods for product validation/compliance. Key Selection Criteria Bachelors degree or equivalent (preferably with bias towards power electronics). Demonstrable hands-on experience in a test and/or QA Validation role at system level (HW/SW) - experience of compliance testing for EMC/Vibration/IP ratings and/or UL would be beneficial. Experience of working with power electronic systems (experience with Higher voltage systems 200V to 800V DC preferred but not essential) An intuitive and practical disposition Organized, proactive and independent An understanding of Safe practice (H&S) Knowledge of switching power converters. Knowledge of circuit analysis, and design of experiments. Knowledge and experience in QMS ISO 9001, TS 16949, or ISO 26262 Knowledge and experience in applicable product regulatory standards such as (EN1175, EN13849, UL 0583, and EN12895). Willingness to travel to external test laboratorys occasionally Experience of ESD/EMC principles and practices. Effective verbal and written communication skills. PC literate with experience in MS Office and databases (good and thorough documentation skills) This is an excellent opportunity to join a market leader in their specialist field of technology and to work from their highly impressive operation in Tyneside. JBRP1_UKTJ

Job Title: Senior Systems Engineer Professional Services Location: Filton, Broad Oak, Portsdown Technology Park, hybrid on site up to 3 days per week Salary: up to £56,465 depending on qualifications and experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. What youll be doing: The Professional Services team is a part of the Strategic Development Group within Naval Ships Combat Systems. The team focuses on early lifecycle operational experimentation and research working collaboratively with customers and industry partners primarily in the Integrated Air and Missile Defence area. As an engineer in Professional Services, you will be at the forefront of developing, testing, and demonstrating capability utilising in-service and future Naval Combat Systems. You will be working both in the virtualised environment and with operational hardware in the Maritime Integration and Support Centre in Portsmouth. Core duties: • You will bring good systems engineering knowledge, including experience with requirements management, system modelling, architecture development, and verification & validation (V&V), enabling you to develop robust and well-structured engineering solutions., • You will interpret multi-layered scientific and technical concepts and translate them into clear system designs and high-quality engineering artefacts, ensuring ideas move effectively from theory into practical implementation., • You will apply good analytical and problem-solving skills, conducting trade studies and evaluations to support evidence-based technical recommendations and informed decision-making., • You will work collaboratively within multidisciplinary teams, communicating effectively with scientists, engineers, and project stakeholders to ensure alignment, clarity, and successful project outcomes. The Professional Services team supports the maritime sector by delivering concepts, experimentations, modelling, and engineering insight to shape future naval capability. Working with defence stakeholders, industry, and academia, the team assesses emerging technologies and develops innovative concepts to strengthen the Royal Navys operational advantage. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-AP1 #LI-hybrid JBRP1_UKTJ

Brightwork's specialist client are currently recruiting a Senior Control Systems Engineer who will deliver remote support to site commissioning engineers by troubleshooting and resolving control systems and process control issues, ensuring successful project completion and smooth hand-over to customers for project acceptance at global installation sites. Responsibilities Technical Support: Providing remote assistance to site commissioning engineers, troubleshooting and resolving issues related to control systems. System Configuration and Testing: Assist in configuring, testing, and validating control systems to ensure they meet project specifications and operational requirements. Documentation and Reporting: Maintain detailed records of support activities, including issue resolution steps, system configurations, and any changes made during the support process. Training and Guidance: Offer training and guidance to site engineers on the operation and maintenance of control systems, ensuring they are well-equipped to handle on-site challenges. Continuous Improvement: Identify areas for improvement in control systems and support processes, providing feedback to the development team to enhance system performance and reliability. Collaboration: Work closely with other engineers, project managers, and stakeholders to ensure seamless integration and operation of control systems. Compliance and Safety: Ensure all control systems and support activities comply with relevant safety standards and regulations. QUALIFICATIONS Trade Qualified Industrial Electrician or Instrument Fitter, coupled with Associated Diploma of Engineering (Electrical), or Equivalent Bachelor of Engineering (Electrical or Control Systems) EXPERIENCE Proven experience in control systems design, programming, commissioning. KNOWLEDGE, SKILLS AND ABILITIES Technical Proficiency: Strong understanding of control systems, including PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition) systems, DCS (Distributed Control Systems), and HMI (Human-Machine Interface) software. Problem-Solving Skills: Ability to diagnose and troubleshoot complex technical issues efficiently and effectively. Communication Skills: Excellent verbal and written communication skills to provide clear instructions and support to on-site engineers. Analytical Thinking: Strong analytical skills to interpret data, identify trends, and make informed decisions. This an excellent opportunity to join a successful and growing business. Please note that due to the nature of the business there will be around 20% travel to international locations. If you are interested in this role, please send your most recent CV and salary expectations to the address supplied. Brightwork offers the services of a recruitment agency for permanent roles and a recruitment business for temporary roles. JBRP1_UKTJ

Commissioning BMS Engineer Location: London & South East The Opportunity Were working with a well-established and growing BMS contractor that continues to secure long-term, high-quality projects across London and the South East. Due to continued growth, they are now looking to add an experienced Commissioning BMS Engineer to their team. This role will suit a hands-on commissioning engineer who enjoys taking ownership of projects, working independently on site, and seeing systems through from pre-commissioning to final client handover. The Role Youll be responsible for commissioning Building Management Systems on a range of commercial and mixed-use projects, working closely with project managers, controls engineers, and site teams. Key responsibilities include: * Commissioning BMS systems from pre-commissioning through to final handover * Carrying out point-to-point checks, functional testing, and system optimisation * Fault-finding and resolving software, hardware, and integration issues * Supporting system demonstrations, witness testing, and client handovers * Producing commissioning documentation, test sheets, and O&M input * Attending site meetings and working to programme and specification What Were Looking For * Proven experience commissioning BMS systems on commercial projects * Experience with at least one major BMS platform (Trend, Tridium, Siemens, Schneider, or similar) * Strong understanding of HVAC plant, control strategies, and sequences of operation * Able to work independently and manage multiple sites effectively * Confident, professional, and client-facing * Full UK driving licence Whats on Offer * Long-term, stable workload with a strong project pipeline * Competitive salary with overtime and expenses paid * Company vehicle or car allowance * Genuine opportunities for progression as the business continues to grow * Supportive team environment with technically strong colleagues BMS Project Manager Location: Kent The Opportunity An established and respected BMS contractor is looking to appoint an experienced BMS Project Manager to oversee the delivery of control systems projects across Kent and the surrounding areas. This role will suit someone with a strong technical BMS background who enjoys managing projects from design through to commissioning and final handover, while acting as the key point of contact for clients and stakeholders. The Role Youll take full ownership of multiple BMS projects, ensuring they are delivered safely, on time, and within budget. Key responsibilities include: * Managing BMS projects from order through to completion * Coordinating engineers, subcontractors, and suppliers * Producing and managing project programmes, RAMS, and documentation * Acting as the main point of contact for clients, consultants, and main contractors * Managing budgets, variations, and project costs * Overseeing commissioning, handover, and client training What Were Looking For * Proven experience managing BMS or building controls projects * Strong technical understanding of BMS systems and HVAC controls * Background delivering commercial projects * Ability to manage multiple projects simultaneously * Strong organisational, leadership, and communication skills * Full UK driving licence Whats on Offer * Stable, long-term project pipeline * Competitive salary and benefits package * Clear progression into senior project or operational roles * Supportive, well-established team with a strong reputation in the market Interested? If youre an experienced BMS professional looking for a long-term role within a stable and growing business, wed like to hear from you. Apply with your CV, and one of our consultants will be in touch to discuss the role in confidence. JBRP1_UKTJ

Our OEM Client based in Gaydon, is searching for a Geometry Integration Lead Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £33.64 per hour. What to Expect: We are searching for a Geometry Integration Lead Engineer to work within the Vehicle package / Geometric integration department. The team are responsible for the full vehicle geometric integration of the vehicle, whilst balancing system and attribute performance, from concept to end of life, across all the company's products. This role is to join the existing integration team to assist with all components that are packaged in the Closures and Exteriors groups. The team's main responsibilities fall into 4 areas: • Definition and delivery of the Closures and Exteriors group systems and customer features., • Integrating Systems into the vehicle to deliver systems, hardware and attribute performance., • Protecting space in the Vehicle for future technology and customer feature content., • To support the existing team that include package zone leaders and group technical leaders., • Help the team deliver high quality, clash-free / target achieving geometry., • Integrating with CoCs and attribute engineering teams with a customer-first mindset., • Develop packaging proposals for delivery of key components and systems., • Support delivery teams with weight, cost and customer experience optimised packaging proposals., • Conduct CAD studies to ensure geometric targets and standards are met or exceeded., • Supporting geometric and system integration through elegant engineering within the Closures and Exteriors zone., • Support the resolution of cross-functional issues., • Experience in product design in at least one functional area., • Experience with CATIA V6 for detail or packaging design and geometric integration., • Structured problem-solving approach & issue-management skills., • Good communication skills – Presentation, written, graphical and verbal., • Well-rounded knowledge of vehicle types, propulsion systems and subsystems., • Experience in using benchmarking tools to support idea generation., • Experience in negotiating solutions in an area of technical conflict., • The commitment to deliver quality results in a flexible and dynamic team environment., • A proven ability to work within strict timing constraints., • Lead engineer or delivery to launch experience of exterior parts., • Higher Degree., • Basic knowledge of the company's systems such as DOORS / RMDV / RTC /JIRA / SDots / WERS / AIMS., • Trained/Experienced using AGILE methodology and Agile planning tools such as Jira and Confluence., • Experience in Design Failure Mode Effect Analysis (DFMEA) & Design Review Based on Failure Mode (DRBFM)., • Ability to use CAD viewer tools such as Digi buck / Teamcenter., • Understanding of project planning and delivery to plan., • Knowledge of electronic-based parts listing and family trees., • Working knowledge of Vehicle Packaging roles, Vehicle Engineering and CoC structures and responsibilities., • Experience in presentation to peers and senior management., • Experienced Vismockup / Digibuck / 3DX user., • Higher Degree. JBRP1_UKTJ

Job Title: Senior Fire & Security Systems Engineer Location: Swindon Salary: £50k base salary plus commission (OTE £70k-£80k), a profit share scheme, and a fully equipped company van. Job Type: Permanent, Full Time The Company: Join us as we are expanding the Swindon team. This is an exciting opportunity with genuine autonomy, a £50k base salary plus commission (OTE £70k-£80k), a profit share scheme, and a fully equipped company van. At the company, we've been protecting people and property since 1991. With over 30 years' experience, NSI Gold accreditation, and BAFE-registered engineers, we're proud to deliver trusted fire and security solutions across the UK. Our services include fire alarms, extinguishers, CCTV, intruder alarms, access control, emergency lighting, and more. As we expand into the South West, we're offering experienced engineers the chance to shape our future in the region. The Role: As a Senior Fire and Security Systems Engineer, you'll work across a mix of installations, servicing, and customer site takeovers. You may be installing a fire panel one day and surveying a new customer site or producing quotes the next. You'll manage your own diary, booking work directly with customers and enjoying genuine flexibility. The role is Monday to Friday, 8am-5pm, with occasional on-call and out-of-hours work. You'll primarily cover the Swindon (SN) area, with occasional nearby travel for national accounts. You'll take your company van home and work independently, supported by the Branch Director, wider company network, and Head Office Support Team. Key Responsibilities: • Carry out site surveys and visits to generate quotes for new and existing customers., • Install, commission, service, and maintain fire and security systems, including fire alarms, emergency lighting, fire extinguishers, fire doors, intruder alarms, CCTV, and access control., • Deliver installation projects from first fix through to commissioning, including upgrades and system expansions., • Complete routine and reactive servicing, fault-finding, and repairs to a high standard., • Undertake full service takeovers for new customers, including testing, certification, and documentation., • Manage your own workload and diary, coordinating installations, service visits, and surveys directly with customers., • Maintain high levels of customer service and professionalism at all times., • Ensure all works comply with NSI Gold standards, British Standards, and legislative requirements., • Accurately complete all documentation and reports using company systems., • Participate in an on-call rota and attend occasional out-of-hours call-outs., • Previous experience in fire and/or security systems engineering (installation, servicing, maintenance)., • Knowledge of fire alarms, intruder alarms, CCTV, access control, or emergency lighting., • Excellent customer service skills - building trust is paramount., • Ability to work independently, manage your time, and complete jobs thoroughly., • Full UK driving licence, • Earning potential: Base salary £50k, with achievable OTE £70k-£80k., • Profit share scheme: Paid directly to you in November, just in time for Christmas., • Autonomy & trust: Manage your own diary and customer relationships., • Career development: Funded training and qualifications in areas such as fire doors, extinguishers, and emergency lighting., • Fully equipped package: Company van, fuel card, tablet, laptop, uniform, and all tools provided., • Benefits: 25 days annual leave + bank holidays, additional day off for your birthday, pension, healthcare options and ongoing training. If you're looking for a role with real freedom, earning potential, and the chance to grow with a business that's just starting its journey in Swindon, this is your opportunity. All applications for this vacancy are to be submitted online, and strictly no agency calls or agency CV submissions. Please click APPLY to send your CV, to be considered for this role. Candidates with the relevant experience or job title of; Fire Alarm Systems Engineer, Security Systems Engineer, Infrastructure Engineer, IT Infrastructure Systems Engineer, Technical Systems Engineer, also be considered for this role. JBRP1_UKTJ

Our OEM Client based in Gaydon, is searching for a Senior Integration Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £33.64 per hour. Key Accountabilities and Responsibilities: • Verification and Validation - Design and develop system integration test cases., • Managing test assets such as HIL, VITAL rigs, and prototype vehicles., • Integration and harmonisation of Visibility Systems into the wider vehicle System of Systems., • Lead and collaborate in cross-functional technical reviews of systems., • Issue resolution and objective data analysis., • Adhere to the defined systems engineering process., • Supporting team members and stakeholders in understanding Systems Engineering methodology., • Effective communicator with the ability to convey complex information clearly and concisely., • Experience at all stages of the Systems V cycle, ideally System and Sub-System., • Expertise generating robust and comprehensive test cases from requirements., • D-Space rig operation., • Proven understanding of automotive networking, diagnostics and fault handling techniques, and related system development tools (CANalyzer, ASL, CANape, etc.)., • Fault Tree Analysis., • Experience in applying Systems Engineering and in solving complex technical issues., • Experience in Dassault toolsets including CATIA 3Dx, TRM, and Magic Systems of Systems Architect., • Experience in Matlab Simulink., • Engineering degree. JBRP1_UKTJ

Electrical Supervisor (Industrial Automation) £40,000 - £46,000 + Training + Progression + Overtime + 25 Days Holiday Sunderland Are you an experienced Electrical Supervisor looking to take responsibility for electrical systems within a fast-paced automotive production environment? Do you want to join a well-established engineering business where you will support and maintain existing PLC-controlled manufacturing systems, ensuring production runs safely, efficiently and with minimal downtime? On offer is the opportunity to join a forward-thinking industrial engineering business operating within a live automotive environment. With established systems already in place, the company is looking for a capable, hands-on electrical professional who can confidently fault find, support automation systems and maintain high standards on site. This role would suit someone with a strong industrial electrical background who enjoys being site-based, problem solving in real time, and supporting production operations day to day. The Role * Support and maintain existing PLC-controlled production systems * Work with Siemens (TIA Portal & Step 7), Omron and Mitsubishi PLC platforms * Carry out electrical installations, testing and inspection * Fault find on control panels, 3-phase systems and 24V relay logic circuits * Work with transformer-fed panels, inter-panel feeds and SEW inverters * Read and interpret electrical drawings * Ensure works meet health & safety and quality standards * Assist with system improvements and production reliability The Person * Experience as an Electrical Supervisor, Electrical Engineer or Senior Electrician * NVQ Level 3 in Electrical Installation (or equivalent) * 18th Edition (BS 7671) If you're interested in this role, click 'apply now' to submit an up-to-date copy of your CV. Reference: BBBH 24008 Keywords: Electrical Supervisor, Industrial Electrician, Automation, PLC, Manufacturing, Automotive, Control Panels, 18th Edition, Inspection & Testing Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will depend on experience, qualifications, and skillset. JBRP1_UKTJ

A leading technology company in the UK is seeking a Senior System Emulation and Evaluation Engineer to join their innovative team. Ideal candidates will have a degree in Electronics Engineering, strong analytical skills, and experience with hardware testing.

We have a great opportunity for a talented senior-level System Emulation and Evaluation Engineer to join our emulation team. Port systems onto FPGAs to test Proof of Concept architectures and IPs. Master’s/Bachelor’s degree (and/or equivalent) and background in Electronics Engineering.

A leading engineering firm in Scotland is seeking a skilled RF/Microwave engineer to manage the entire hardware lifecycle of innovative products. Join a dynamic team committed to engineering excellence and innovation.

An ambitious Edinburgh-based startup is looking for a Senior Hardware Engineer to take ownership of circuit-level design for mission-critical avionics. The role requires experience in hardware design for complex systems, with responsibilities including digital system design and EMC compliance.

We’re seeking a Senior Quality Assurance Engineer to lead and support Quality Management System (QMS) performance across design, manufacturing, service, and compliance functions.

Senior System Verification Engineer (Contract). Vector Recruitment Ltd is looking for a Senior System Verification Engineer to lead verification efforts across cutting-edge audio and video products. Extensive and proven recent and relevant experience in system testing, quality engineering, or relate

Senior RF Engineer Edinburgh 12-month contract Paying up to £80p/h (Inside IR35) The Opportunity Our client is looking for Senior RF Engineers to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft, as well as advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Senior / Principal FPGA Engineer Edinburgh, Luton, Bristol, Southampton (Hybrid, 2 days from home) circa £88 per hour + overtime Contract position Virtual interview Mon–Fri Certain Advantage is collaborating with a key client to recruit Senior / Principal FPGA Engineers who will be responsible for the design and development of FPGA designs using VHDL and verifying designs using VHDL or System Verilog. What will you be doing? Creating innovative and robust VHDL-based designs Documenting and recording deliverables Verifying FPGA designs Ensuring configuration management/keeping designs under revision control Providing progress reports A couple of things you should know: At least 5 years’ experience of developing FPGA using VHDL or Verilog Experienced with Mentor Graphics FPGA development tools including HDL Designer, ModelSim / Questa and Precision Familiar with Xilinx / Intel (Altera) / Microsemi (Actel) design flows (ISE, Vivado, Quartus) and third-party synthesis tools Experience in specifying timing and area constraints for efficient FPGA Place and Route. Independent verification using VHDL Experience of FPGA requirements capture and requirements management tools During an interview, you may be asked about: Development of real-time, embedded, safety-critical FPGA, preferably in accordance with RTCA/DO-254 DAL A or B Independent verification using SystemVerilog / UVM Experience of embedded processor cores (e.g. ARM) in FPGA designs Sounds like you? Apply now or WhatsApp/ring Lukas - (phone number removed) / (phone number removed) Working with Certain Advantage We go the extra mile to match top talent with the right opportunities. Whether you're looking to make a big impact or take the next step in your career, we’re here to support you. We work with businesses across the UK in Engineering, IT, Finance, and Marketing. If this role isn’t for you, visit (url removed) to sign up for job alerts and career advice

Senior IT Engineer - Edinburgh If you're an experienced IT support professional with a background in Managed Service Providers (MSP) looking to advance your career, a thriving IT managed services provider in Edinburgh is seeking a Senior IT Support Engineer to join their team. This role offers excellent progression opportunities and occasional travel across Scotland, along with comprehensive training, support for Microsoft certifications, and ongoing professional development. You'll tackle diverse IT challenges across industries, gaining exposure to cloud platforms, cybersecurity, and advanced networking. The company fosters a friendly, inclusive culture with open communication, direct collaboration with leadership, and recognition for your contributions. Key Responsibilities: • Provide IT Support: Diagnose and resolve escalated support tickets for desktops, laptops, servers, and mobile devices running Windows 11, MacOS, and Microsoft 365. - Project Delivery: Taking part and ownership of IT projects such as new client onboarding, Office 365 migrations, and network installations. - Microsoft Entra / Azure AD Administration: Manage users, groups, access, and support cloud identity issues. - Intune MDM Experience - Customer Service: Deliver friendly, professional support to end-users via phone, email, and on-site. - On-Site Visits: Travel to client offices around Scotland as needed. - Ticket & Documentation Management: Log issues, track progress, and document resolutions. - System Maintenance: Proactively monitor customer systems and remediate alerts. - Continuous Improvement: Contribute to the knowledge base and help refine processes. Essential Qualifications & Experience: • Technical Skills: Windows, Networking, Office 365 Migrations, Intune MDM, SharePoint, Teams, OneDrive, Defender, Sentinel - MSP Experience: Previous experience in an MSP or IT support provider environment. - Right to Work in the UK: Legal authorisation to work in the UK is required. - Troubleshooting: Excellent IT problem-solving skills. - Communication: Outstanding interpersonal skills and fluent written and spoken English. - Team Player: Proven ability to work collaboratively in a small team. - Task Ownership: Organised, self-motivated, and able to manage workload independently. - Certifications/Training: Relevant IT certifications or equivalent knowledge

Sapien Engineering are looking for a Senior RF/Microwave Engineer to join a global engineering consultancy on a permanent basis. The role is within the Aerospace/Defence industry. The role supports hybrid working with 3 days a week required on site in Edinburgh. The role is paying circa £80,000pa + benefits. Job requirements: • RF/Microwave PCB Design, • Microwave Power Amplifier Design, • Circuit Modelling and Simulation, • Full Lifecycle Circuit Design, • Sub-System Design, • Testing + Debugging Designs Please note all applicants must be eligible for full, unrestricted SC clearance. For more information, please apply with an updated copy of your CV ASAP