Trabajos technical operator en BoltonCrear alertas

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £27.54 per hour PAYE or £37 per hour Umbrella Monday - Friday 37 hours + The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level Specific responsibilities include: • Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations., • Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions., • Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level., • Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test., • A good understanding of measurement and test principles, and associated test equipment., • An understanding of the typical CADMID product lifecycle for test equipment is desirable., • An understanding of RF and microwave technology at subsystem level would be an advantage., • An understanding of Environmental testing (including ESS) would also be an advantage., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements., • Proven analytical and problem solving skills, with strong attention to detail., • The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.

Job Title: Press Brake Operator Location: Bolton Hours: Monday to Thursday, 07:30am - 4:30pm Friday: Early finish at 13:30pm Pay Rate: £13.00 - £16.00 per hour (depending on experience) Job Overview: We are currently recruiting an experienced Press Brake Operator to join a well-established manufacturing business in Bolton. The successful candidate will be responsible for setting up and operating press brake machines to produce high-quality components in line with engineering drawings and production schedules. Key Responsibilities: • Set up and operate press brake machines, including Amada and Ursviken, • Read and interpret engineering drawings and work instructions, • Carry out bending and forming operations to tight tolerances, • Adjust machine settings as required to maintain accuracy, • Follow all health and safety procedures at all times, • Maintain a clean and safe working environment Skills & Experience Required: • Proven experience as a Press Brake Operator, • Experience using Amada and/or Ursviken machines (essential), • Ability to read and interpret technical drawings, • Strong attention to detail and quality, • Reliable, punctual, and able to work independently What's on Offer: • Competitive hourly rate between £13-£16, depending on experience, • Early finish every Friday, • Opportunity to work with modern machinery in a supportive team Interested? If you are interested, please apply with your CV.

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Test Operator / Electrical Test Engineer on an initial 12 month contract. Experience specifically required: • Apprenticeship essential, • Significant electrical test experience requiredContract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph and then after 12 weeks the rate is £29.70ph Electrical Test Operator Job Description:The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include:, • Certify the product in line with Product Certification procedure., • Maintain product certification and approval via regular audits., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment., • Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment., • Carry out simple fault-finding procedures on electronic equipment., • Keep test records and reporting faults for rectification., • Ensure manufacturing test times are met., • Check and complete all paperwork associated with the manufacturing data pack., • Maintain to the highest level, workmanship standards and product quality., • Ensure compliance with all associated procedures applicable to the manufacturing process., • Maintain a safe working environment., • The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training.

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Providing test engineering support to operators on the shopfloor, • Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level, • Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information, • Identify remedial and corrective actions, • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: • A good understanding of measurement and test principles, and associated equipment down to component level, • Awareness of electrical/electronic sub-system and system design, integration, and test principles., • An understanding of RF and microwave technology at subsystem level, • An understanding of Environmental testing (including ESS), • Manual handling training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Role Title: Account Manager - UK (Bus & Fleet) Location: United Kingdom (Remote / Depot-Based as required) Reporting To: Managing Director Overview of the Role The Account Manager's primary relationship owner for existing bus and fleet clients across the United Kingdom. This is a client-facing, commercially focused role centred on protecting and growing established accounts, ensuring clients receive consistent value from our charging infrastructure, and coordinating internally to keep uptime commitments on track. Key Responsibilities Account & Relationship Management • Serve as the primary day-to-day contact for existing bus operator and fleet clients across the UK., • Own account health - proactively managing satisfaction, identifying risks, and escalating concerns early., • Conduct regular account reviews and service check-ins, ensuring clients feel genuinely supported., • Manage contract renewals and negotiate extensions in line with commercial objectives. Commercial Growth • Identify and develop upsell and expansion opportunities within existing accounts including additional hardware, Operation & Maintenance contracts, remote monitoring packages, and depot upgrades., • Maintain an accurate account pipeline and track revenue forecasts within CRM., • Feed client intelligence and market feedback into the wider commercial and product teams. Operational Coordination • Work closely with Service Delivery, Technical, and Commissioning teams to ensure client commitments and SLAs are met., • Coordinate access, scheduling, and communication around planned maintenance, fault response, and site interventions., • Represent the company professionally at client sites, depot visits, and operational reviews. Reporting & Documentation • Maintain accurate, up-to-date records of client activity, account status, risks, and opportunities in CRM., • Contribute to client-facing reporting on asset performance, uptime, and SLA compliance., • Provide regular internal updates on account status and market conditions. Skills and Experience • Proven track record in account management, customer success, or a client-facing commercial role, ideally within transport, fleet, infrastructure, or a related technical sector., • Ability to engage credibly with depot managers, fleet directors, and transport authorities., • Comfortable holding technical conversations around EV charging hardware, uptime performance, and infrastructure reliability, you don't need to be an engineer, but you need to hold your own., • Strong communicator - written, verbal, and in person. You build trust quickly and maintain it over time., • Self-managed and proactive - you identify when a client needs attention without being prompted., • Willingness and ability to travel across the UK for client meetings and site visits. Qualifications • Background in commercial, operational, or technical account management (transport, energy, or industrial sectors preferred)., • Valid UK driver's licence., • Right to work in the UK. Desirable • Experience with EV charging, zero-emission transport, or clean energy infrastructure., • Existing relationships within the UK bus, coach, or public transport sector., • Familiarity with DC charging systems or depot electrification environments., • Experience working in a growth-stage or scaling business where you have had to build process as you go. Performance Expectations • High client retention across the existing UK account base., • Consistent SLA compliance across commissioning, maintenance, and fault response milestones., • Revenue growth through structured upsell activity within existing accounts., • Accurate and up-to-date account records maintained in CRM at all times., • Strong client satisfaction evidenced through account reviews and direct feedback. If this role is of interest, please apply directly and share any questions to

Electrical Calibration Operator 12 Month Bolton £21.12 rising to £22.12 PAYE (£28.35 rising to £29.70 Umbrella) Role Purpose As a valued member of the Manufacturing function, the Electrical Calibration Operator is responsible for the routine calibration, maintenance, and repair of both Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role ensures all test and measurement instruments are compliant with proprietary procedures and company standards to maintain operational traceability. Key Responsibilities Perform initial and routine calibration, maintenance, and repair of a wide range of electrical test and measurement equipment (e.g., Power Supplies, Multimeters, Oscilloscopes, and Function Generators). Carry out in-service inspection and testing of electrical equipment to ensure safe and reliable operation within the factory environment. Ensure factory-specific and proprietary measuring equipment is maintained strictly in accordance with current departmental processes and manufacturer’s instructions. Generate clear, accurate, and comprehensive calibration and maintenance records to ensure full audit traceability. Work effectively within a multi-disciplinary team to provide high-level support to the wider Operations and Manufacturing functions. Technical Skills & Experience Proven experience calibrating COTS and Special to Type Test Equipment (STTE...

Our client, a large Aerospace and Defence supplier is looking for a Production Test Engineer (Electronics) to join them on a contract basis at their site on Bolton. Due to the nature of the role, applicants must hold the sole British nationality and be eligible to obtain full SC Clearance. 12-month initial contract. £34-£37 p/h Umbrella, inside IR35. Fully onsite in Bolton.As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, f...

You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on h

Are you experienced in fine pitch soldering or microelectronics assembly? Do you enjoy precision work under a microscope, working with extremely small components in a clean, controlled environment? Were supporting a UK defence manufacturer on the lookout for a detail focused Microelectronics Assembly Operator to join a high performing production team working on advanced electronic assemblies. This role is ideal for candidates from electronics manufacturing, PCB assembly, micro soldering or medical/automotive electronics backgrounds. Key Responsibilities: Soldering and assembling microelectronic components under a microscope Building and reworking PEC / CCA assemblies to exacting quality standards Reading and following detailed work instructions, layouts and build packs Carrying out certified manufacturing tasks in line with IPC and ESD standards Working in a cleanroom style, high precision environment Tentatively work across several departments, these might include: Looming: binding wire looming is a cable assembly that efficiently distributes electrical signals by linking cables together using a crimping tool. (Ex; wiring, root wiring, soldering and fibre optics cabling), PEC and CCA Assembly Microelectronics Plastics Department (Ex; applying glues, cutting out intricate patterns, and moulding). Manufacturing Controller/Stores What do you need?: Proven experience in micro soldering or fine pitch electronics assembly Confident working under a microscope for long periods Excellent manual dexterity and attention to detail Ability to follow technical drawings and manufacturing instructions ESD aware working practices IPC 610 certification (preferred, not essential) Additional skills: Experience utilising a soldering iron and working with manufacturing micro-components Experience using a microscope/magnifying glass What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Full Time onsite, open to the below: Standard Days 7-3:36 Monday-Thursday, 7-11:36 Friday 12 Hour Days 7-7, Either Sunday-Tuesday, or Wednesday-Friday Nights Monday-Thursday, 10 hours/night TPBN1_UKTJ

Our client is a leading company in their industry, proud of innovation, quality, and a commitment to excellence.As an Assembly Operator, you will be an integral part of our dynamic production team, contributing directly to the success of our operations.Read and interpret technical drawings, schemati

Electrical Calibration Operator 12-Month Contract Based in Bolton Offering £28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Do you hold an Electrical/Electronic Apprenticeship? Do you have experience conducting calibrations on instruments? Do you want to work with an industry-leading company? If the answer is yes to these, then this role could be for you. You will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have experience with products, rather Test and process equipment experience is ideal. For this role, you will be required to hold an approved apprenticeship relating to Electrical/Electronic Engineering to NVQ Level 3/TR23/TR21. Your responsibilities will involve: Working in a multi-disciplined team to support the Operations team. Initial calibration, routine calibration, and maintenance of test and measurement equipment. Ensure that both factory and proprietary test and measuring equipment are maintained in line with current procedures. Carry out calibration and repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive calibration/maintenance records for traceability purposes.The skillset/experience you may have includes: Generate clear and comprehensive calibration & maintenance records. Experience in calibrating COTS/Special to Type Test Equipment Experience in calibrating electrical equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc. Experience in In-service Inspection and Testing of Electrical Equipment Be competent in following the manufacturer's instructions. A good understanding of SAP would be desirable. Time served apprenticeship/modern apprenticeship or NVQ Level 3 City & Guilds part 2 & 3/ONC/HNC in Electronics Experience working on Environmental Stress Screening Facilities (ESS) If this sounds like an opportunity you want to be involved in and could see yourself growing in, then simply apply and we can discuss further! Electrical Calibration Operator 12-Month Contract Based in Bolton Offering £28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Electronic Test Operator Initial 12-months Bolton (onsite) £28.35ph, UMB inside IR35 (rising to £29.70ph after 12 weeks) Please note, this role does require SC level Security Clearance and will be working on "UKEO" programmes, meaning the post is only open to sole British nationals due to the nature of work. The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. Carry out simple fault-finding procedures on electronic equipment. Keep test records and reporting faults for rectification. Ensure manufacturing test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training. No colour blindness. Essenitial Requirements: Electrical Apprenticeship in One Of The Following Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC Qualifications must be in Electrical Manufacturing/Engineering subjects Please only apply if you are able to meet the security clearance resctrictions & hold the relevent qualifactions listed above

Production Operative and Driver Main Responsibilities: Must be able to work in both High and Low Risk Production areas Multi Drop Driver when required Basic Food Hygiene Certificate and a medical certificate confirming fitness to work in a food environment are required • Key Duties include:, • Packing products, • Assembling orders, • Sorting products, • Loading and unloading vehicles, • Maintaining a clean workspace, including rubbish removal, • Labelling products Training will be Provided for: • Label generation equipment, • Filling out process control sheets and documentation, • Checking metal detectors, • Safe use of knives, • Operating Hand and Auto Slicers, • Weighing and bagging products, • Cleaning procedures, including chemical handling and dilution (aware of COSHH requirements), • Operating Urschel and Trieff dicers, • Using nitrogen tunnel, • Operating fork, reach, and pallet trucks, • Using multivac, vacuum, and gas flushed packing machinery, • Operating Dicing Room Tumbler Driver Responsibilities: Company Vehicle Policy: Only authorised drivers may use company vehicles. Unauthorised passengers are not allowed. MAIN RESPONSIBILITIES: • Company Representation: Drivers represent the company during deliveries and collections and must maintain a professional appearance and behaviour., • Dress Code: Clean attire is required, as drivers may have direct customer contact. High visibility jackets and safety footwear are mandatory for certain customers and are provided by the company., • Driving Conduct: Drive safely, courteously, and within the law. Be aware of legal requirements, including smoking and tachograph laws. The company is not responsible for any legal infractions (e.g., parking or speeding fines). Losing your license may affect your employment, though alternative roles may be considered., • Loading and Paperwork: Drivers are responsible for loading their vehicles and ensuring all paperwork matches the load. Missing products may result in the company seeking compensation., • Temperature Checks: Conduct and record temperature checks at each delivery/collection. Return all delivery paperwork and temperature control sheets to the office and Technical Manager daily. Check temperature probes weekly with the Technical Manager for accuracy., • Tachographs: Return tachographs to the relevant Director as required. Communication: • Drivers receive a telephone allowance for mobile calls related to deliveries and collections. Regular communication with the company is required. If you do not have a hands-free device, pull over safely before using your phone, as it is illegal to use a handheld device while driving. Additional Responsibilities: • When not driving, drivers should be able to perform the duties of a Production Operator (QM034) or as many aspects of the role as possible. If you are interested in the following role, please contact (phone number removed) for more information

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Guidant Global is partnering with a leading UK defence organisation to recruit a hands on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies. This is a practical, production based role focused on diagnosing faults down to circuit card and component level, working directly with test equipment in a manufacturing environment not a desk based design role. What youll be doing Supporting manufacturing test and diagnostics of electrical and electronic sub systems Investigating failures down to circuit card and component level Using a wide range of manual and automated test equipment Introducing and supporting new test facilities, specifications and operator instructions Working closely with production and quality teams to maintain build schedules Contributing to defect reviews and corrective actions within a controlled defence environment What were looking for Essential HNC (or equivalent) in Electronic / Electrical Engineering Strong hands on experience with electronic test and fault finding Good understanding of digital and analogue measurement techniques Experience using equipment such as oscilloscopes, DMMs, signal generators and power supplies Comfortable producing test instructions, specifications and technical reports Desirable (not essential) RF / Microwave exposure at sub system level Experience with automated test equipment (ATE) Environmental or high voltage testing awareness Defence or regulated manufacturing experience SAP exposure Test equipment youll regularly use Oscilloscopes, DMMs, power supplies, signal generators Spectrum analysers / VNAs (where applicable) RF measurement equipment in a controlled test environment Why this role Hands on engineering real faults, real test equipment Stable, long term defence programmes Supportive engineering team Clear processes and production support (not firefighting) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Test Operator Pay: £28.35 per hour via Umbrella (rising to £29.70) Location: Bolton Contract: 12 Months (possible extension) Hours: Monday - Friday, 37 hours per week Security Clearance: Security Clearance required however can start on BPSS Responsibilities: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant, test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members.Skillset/experience required: The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Signifiacnt electrical test experince No colour blindness.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract. Looking for somebody with substantial test engineering experience. Diagnosis of test failures Testing experience down to component level The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £37.00ph (Umbrella). Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Development and Production Test Engineer – Electronic / Electrical Job Description: Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications): HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. A good understanding of measurement and test principles, and associated test equipment. An understanding of the typical CADMID product lifecycle for test equipment is desirable. An understanding of RF and microwave technology at subsystem level would be an advantage. An understanding of Environmental testing (including ESS) would also be an advantage

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

Guidant Global is proud to partner with a leading UK Ministry of Defence organisation to recruit an experienced Production Test Engineer with a strong Electronic/Electrical engineering background. This role supports the testing and fault diagnosis of electrical and electronic sub‑systems and circuit cards throughout the production lifecycle. You will play a key role in supporting manufacturing test capability, ensuring delivery against programme time, cost and quality targets. An HNC in Engineering or equivalent is essential. Key Responsibilities: You will collaborate with a small team of dedicated engineers in a dynamic, yet friendly and inclusive manufacturing environment, where you will be responsible for the following tasks: * Provide technical support for manufacturing tests and diagnostics of weapon sub-systems at system and sub-system level. * Deliver Test Engineering support from concept through to Production Readiness and operational release. * Introduce and configure test facilities, ensuring compliance and producing specifications and operator instructions. * Conduct testing and diagnose failures in electrical/electronic systems down to circuit card or component level. * Implement corrective actions promptly to maintain production schedules and resolve technical issues. * Represent Test Engineering at Defect Review Boards to drive timely resolution of quality notifications. What do you need?: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to electronic component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. CADMID product lifecycle for test equipment is desirable. Environmental testing would also be an advantage. High Voltage training/awareness. SAP Beneficial MS Office skills Familiarity with core equipment: Digital multimeters (DMMs) Oscilloscopes Power supplies Counter timers Signal/function generators Current clampsAdditional desirable experience: Vector Network Analysers (VNAs) Spectrum analysers Waveguides RF power sensors What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role: Production Test Engineer - Live Build Location: Stevenage - fully onsite Hours: 37 per week Hourly Rate: £32-£36 per hour via Umbrella, inside IR35 Clearance: SC required before starting, UK Eyes Only due to project What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements: Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

CNC Operator to work at their facility based near Darwen.

Plant Operator – Wood Chip Power Plant £30,000 Milton Ernest, Bedfordshire MC Technical Recruitment is currently looking to recruit a Plant Operator to carry out routine and maintenance at a Wood chip burning power plant in Milton Earnest, Bedfordshire As an Plant Operator you will be responsibl

Join a unique apprenticeship that is part of a record £179m investment at our Taw Valley site in Devon.We are currently going through an exciting expansion for a new production line which will make mozzarella cheese.This two year apprenticeship offers three distinct pathways: Liquid processing, Moz

Excellent IT skills, an ability to acquire other technical skills and to operate technical equipment is essential. The Senior Technical Operator (STO) will be based in the BBC Stornoway office , working with BBC Naidheachdan journalists across the Western Isles. Advise and guide on story treatments

Site Operator c£30,000 Warrington / North West MC Technical Recruitment is currently looking to recruit two Site Maintenance / Site Operators for a waste management company to be responsible for the operation & maintenance of closed landfill sites across North Wales, Cheshire, Lancashire with Warri

Required to work at a manufacturing company based in St.Operate production machinery in a safe and efficient manner.Conduct routine quality checks on products.Pack and prepare products for dispatch according to specifications.Maintain cleanliness and organisation on the production floor.Follow all c

Rise Technical Recruitment Limited is seeking a Machine Operative for their new site in the United Kingdom.

Your Role: We are looking for a Studio Technical Operator - Sound to join the team on a 12 month FTC. Diagnose and resolve audio‑technical faults efficiently under pressure. Collaborate with the Technical and Editorial teams to develop and implement new audio workflows, technologies, and best prac

This is an exciting opportunity to join Arla Foods in a new and upcoming Dairy Manufacturing Apprenticeship – Technical Operator role as part of our £179m expansion of the Arla Foods, Taw Valley site in Devon. This is a fantastic opportunity to start a long‑term career in manufacturing, with cl

Proactive Technical Limited is looking for a Forklift Driver / Warehouse Operative in Henlow, Bedfordshire.

A vibrant digital media agency in Greater London is seeking a tech operator to manage delivery of film and TV content for international audiences. Candidates should have strong technical skills, including proficiency in Adobe Premiere Pro and knowledge of digital video formats.

Forming part of a dynamic shift team you will be operating at Severn Trent's Water Treatment Works situated in.Your duties will include management of raw water sources, through plant processes, onsite sampling, and lab testing.Your role will be to produce drinking water to high quality standards for

The Technical Operations Assistant will report to the Head of Technical Operations, as part of a Tech Ops team on a rotational shift pattern. Working closely with Production and Artists to ensure smooth working practices, the Technical Operations Assistant is responsible for quality checking and ens

Morrisons is seeking a Manufacturing Key Operative - Technical in the United Kingdom to optimize machine performance while ensuring health and safety, food safety, and hygiene standards.

A logistics staffing agency is seeking a Bendi Forklift Driver for evening shifts from 2:00 PM to 10:00 PM in Luton.Responsibilities include managing goods, packing orders, and controlling stock levels.Candidates must have a valid bendi license within the last 3 years and excellent communication ski

The Technical Operations Assistant will report to the Head of Technical Operations, as part of a Tech Ops team on a rotational shift pattern. As a Technical Operations Assistant, you will regularly be required to troubleshoot and problem-solve day-to-day issues that may arise. Working closely with P

Operate and maintain a range of technical equipment to support the production and delivery of broadcast‑quality content. Diagnose and resolve audio‑technical faults efficiently under pressure. Collaborate with the Technical and Editorial teams to develop and implement new audio workflows, techno

A leading dairy company in Manchester is offering an exciting opportunity for a Dairy Manufacturing Apprenticeship as part of their expansion project.This full-time role involves operating machinery, conducting fault diagnosis, and ensuring compliance with food safety standards.You will gain practic

Amentum, a global leader in advanced engineering, technical, and professional services serving the US government, allies and critical infrastructure sectors, is seeking an Technical Control Facility Operator (TCF Operator) to support a government contract based on the island of Diego Garcia. The Tec

CNC Milling Operator/Machinist (DAYS).

A leading manufacturing and production business in Luton is seeking an SMT Operator to maintain quality and accuracy during a surge in workload.

A specialist precision engineering company in the UK is seeking a CNC Milling Operator to join their team.

Experience of working with digital video formats, technical specifications, and encoding/transcoding. The tech operator is required to manage the delivery of film/tv content on a tight turnaround for an international audience. Producing output in line with specific film and tvtechnical standard.

Proactive Technical Limited is seeking a Machine Operator to work in St.