Trabajos american national insurance en Los Angeles, California - Page 6Crear alertas

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Competitive salary, • Employee discounts, • Familiarity with, and a working knowledge of related standards from the American National Standard Institute (ANSI), NACE International (NACE), Society for Protective Coatings (SSPC), NSF International (NSF), American Society for Testing and Materials (ASTM), etc., • Familiarity with but not limited to standard test practices for coating work surface preparation techniques, coating inspection instrumentation, measurements of film thickness, protection of surfaces, use and application of fillers, adhesion testing, spark testing, etc., • Working knowledge of the Cal/OSHA Construction Safety Orders and applicable confined space regulations., • Applicable SSPC & NACE Level 2 or 3 certifications with a minimum of 10 years experience. NACE Level 2 must be under the supervision of a NACE Level 3 supervisor who will review and sign off on reports., • Ability to interpret plans, specifications, special provisions and other contract documents., • Ability to independently identify potential problems and propose solutions., • Previous experience on inspection of coating work related but not limited to penstocks, valves, storage tanks, waterlines and bridges., • Knowledge of cathodic protection systemsRoles and Responsibilities:, • Under the oversight and direction of Department Section Head, Construction Inspectors, Resident Engineers, Area Supervisors or Consultant Construction Managers on projects requiring a coating inspector., • Preparation of inspection reports., • Perform inspections of coating works and the related practices such as but not limited to surface preparation, film thickness, protection of surfaces, application of fillers, adhesion testing, spark testing, instrument verification, etc.; perform oversight and enforcement of compliance with the contract documents for the coating of various Department waterworks, bridge, and flood control projects/facilities being constructed/restored by contractors under contract with the Department., • Respond to complaints and inquiries from the public, elected officials, other agencies, Project Management Division III staff and other affected Department Divisions., • Establish and maintain effective working relationships with Department staff.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role Hadrian's Controls Engineering team develops 0-1 automation solutions to supercharge the efficiency and capabilities of our CNC machines. The team focuses on developing novel solutions for automated probing validation, machine calibration, in-process control, tool laser measurement, breakage detection, tool life, offsets, and origins. We are looking for a Controls Engineer to execute our Machining roadmap to scale Hadrian to be multi-factory across the US. You will work closely with Applications Engineering, CAM Operations, Software Engineering, and Robotics to push the boundaries of machining at scale and we are looking to add a curious and self-motivated expert to join our already world class team. What You’ll Do * Universal Controller Interface – Develop a universal controller interface for CNC machines to streamline operations and ensure interoperability across diverse machining platforms. * Inspection and Process Control – Utilize spindle probing to revolutionize inspection and process control, enhancing precision and efficiency. * Integrated Feedback Loop – Innovate an integrated CMM<>CNC feedback loop, bridging the gap between measurement and control in machining processes. * Operator Enablement - Develop systems that empower operators in advanced machine control, minimizing human and lowering the barrier to entry for CNC manufacturing * Process Development - Support cross-functional teams by engineering processes that expand and enhance on-machine capabilities. What We’re Looking For * Macro Programming – Experience writing macros for in either Fanuc, Siemens, or Heidenhain * CNC Machine Operation – Ability to run and operate CNC machines including part setup, tool loading, tool offsets, spindle probing * Software – Experience coding with an understanding of software principles, including Python, data structures, version control (e.g. GitHub), and testing. * Communication – Excellent communication skills both written and verbal. * Machining Knowledge – Has applicable experience with a variety of machine types (mills, lathes), materials (alum, stainless, hard metals), tooling application, workholding, and fixture design. What Will Set You Apart * Experience with PLC programing, software engineering, electrical engineering, mechanical engineering, or robotics * Experience with hyperMILL, Heidenhain, Fanuc, NX, machining Inconel or Titanium, macro programming * Strongly admired skills - System design, mechanical design, operational experience, and the ability to bridge hardware and software disciplines. Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role We are seeking a skilled and driven Electrical & Controls Engineer to join Hadrian’s Factory Automation division, a team dedicated to building and scaling Hadrian’s core machining business. This role is focused on the design, development, and commissioning of automated robotic cells that support high-precision, scalable manufacturing. As part of this team, you will work directly with hardware engineers, software engineers, and robotics engineers to bring advanced production systems from concept to operation. You will help execute our Machining roadmap to scale Hadrian to be multi-factory across the US. We are looking to add a curious and self-motivated expert to join our already world class team. What You’ll Do * Lead the electrical and controls design for advanced automated manufacturing robotic cells. * Write and maintain PLC applications using Siemens TIA Portal. * Design and debug control panels to industrial standards (NFPA 79, UL 508A). Develop and maintain electrical documentation, wiring diagrams, and bill of materials (BOMs). * Commission and debug automation systems on the production floor. Diagnose and resolve control system and hardware issues. * Develop standards, documentation, and procedures for scalable automation deployment. What We’re Looking For * Bachelor's degree in an engineering, physics, or computer science discipline. * Experience with Siemens automation systems and programming. * Experience designing and commissioning electrical systems and panels to industrial safety standards. * Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11. * Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis. * Excellent written and verbal communication skills. Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Johnson Service Group, an award-winning staffing company is looking for a detail-oriented and motivated Test Technician to join our team. This entry-level role is ideal for individuals with a passion for electronics and hands-on testing. The successful candidate will assist in the testing, troubleshooting, and repair of power supply units, ensuring products meet quality and performance standards. Pay Rate: $25.00 HR Key Responsibilities: • Perform functional and electrical testing of power supply units according to established procedures., • Troubleshoot and diagnose issues in electronic assemblies using test equipment and schematics., • Execute soldering tasks, including rework and repair of surface mount and through-hole components., • Maintain accurate test records, documentation, and data logs., • Work closely with engineers to provide feedback and support product development and continuous improvement., • Ensure all work complies with company safety, ESD, and quality standards. Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You'll be responsible for the build campaign for the Gravitas mission, K2's first flight of the Mega class satellite. You'll need to develop knowledge of all vehicle subsystems, interfacing with many different teams across the company. You'll develop the build flow, working to optimize build order and adapt to vehicle issues as they arise throughout integration and testing in order to ensure an on-schedule delivery. Our ideal candidate will be able to help derive clarity from ambiguity and thrive as an autonomously driven member of the team. Responsibilities • Develop integration planning and satellite build flows for the K2 Mega class satellite at the system level, • Work closely with production to define, create, and iterate on solutions that increase build efficiency., • Collaborate with engineers and technicians to disposition nonconformances and evaluate any corrective actions, • Serve as integration point of contact for TVAC, • Bachelor's degree in electrical, aerospace, mechanical, computer, or other engineering discipline, • 5+ years of experience in an integration engineering role (includes internships and hardware-intensive extracurricular projects), • Experience creating, improving, and deleting production process and workflows, • Experience interacting with CAD software and CAD models, • Experience working in a clean room and with ESD-sensitive equipment, • Experience leading lift operations, • Experience creating GSE, tooling, or shipping containers to support production operations, • Excellent interpersonal and negotiation skills, • Proficient in Python and/or Rust, • Experience or exposure in a test or automation role, • Experience with GraphQL, • Base salary range for this role is $130,000 - $180,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 Space is building large, high-powered spacecraft for the next generation of space development. Backed by Lightspeed Venture Partners, Altimeter Capital, and many others ($200M raised to date), we intend to mass produce the highest-powered satellite platforms ever built for missions across LEO to Deep Space. The rise of launch vehicles like Falcon 9 and Starship enables the move from an era of mass constraint to one of mass abundance. We believe this new era requires spacecraft with a fundamentally different design in order to fully utilize the massive rockets coming to market. We're a team that believes the future lies in building large, high-powered satellites that can handle multiple orbits. This is a necessity if we ever want to develop the solar system, and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series B space startup, we'd love for you to apply. The Role Partnering with design engineers early on in the process, you will ensure manufacturability, build the first prototype, design the build flow and fixturing, and finalize the process for transition to production. You will test out new techniques for manufacturing large satellite structures, harnessing, mechanisms, and integrated electronics systems. In your first 6 months you will develop manufacturing methods and tooling for integrated avionics systems, define manufacturing flows for subsystems, and collaborate with design teams to improve the manufacturability of spacecraft components. In your first year you will implement these advanced manufacturing techniques on flight hardware and transition the technology you develop to production. Responsibilities • Collaborate with design engineers to ensure design for manufacturability for initial design, flight hardware, and tooling, • Develop innovative manufacturing systems for large spacecraft assemblies, including electromechanical sub-assemblies, harnessing, welded/bolted structures, and mechanisms, • Create custom tools and processes to support the manufacturing technologies you create including Manufacturing Execution System (MES) software, • Demonstrate the advanced manufacturing techniques on prototypes, working with the design teams to improve the manufacturability of the designs, • Develop the subassembly build flow and iterate to create an efficient production flow for the satellite, • Bachelor's degree in electrical, mechanical, aerospace, or other relevant engineering discipline, • 3+ years of experience in a high volume, rapid production environment in a manufacturing, integration, and/or design engineering role, • Demonstrated results with product development and/or process improvements, • Experience setting up a manufacturing/production floor for first article builds, • Experience designing tooling for mechanical subassemblies and electronics, • Experience designing hardware for manufacturability, • Demonstrated experience developing production processes from the ground up including driving design improvements for manufacturing, • Experience working closely with technicians and build tooling, • Experience with aerospace manufacturing standards such as soldering standards, torque specifications, welding standards, and quality assurance standards, • Familiarity with CAD software (NX or equivalent) and geometric dimensioning and tolerancing (GD&T), • Base salary range for this role is $100,000 – $175,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for a Area Sales Manager II, Residential in the Southern California region. The purpose of the Area Sales Manager is to grow market share of Mitsubishi Electric systems by developing and utilizing existing relationships with key distributor personnel and local contractors. This role places an emphasis on acquiring, training, and supporting new or existing Diamond Contractors to drive success in the marketplace and have a positive impact on growth for the contractor, distributor, and METUS. The essential functions of the position include, but are not limited to the following: • Partner with distributor staff and contactors to execute growth plans while implementing business development concepts., • Further develop partnerships with Distributor management and staff, contractors, utility companies and builders as necessary for sales growth., • Sell the value proposition: Why Mitsubishi in tandem with offering the benefits of Mitsubishi’s broad line of whole home solutions., • Participate in local professional groups, industry associations, Distributor trade shows and other event functions., • Prepare territory analysis pertaining to performance and growth., • Administer and conduct sales and applications training, marketing programs, and annual reviews at the contractor and distributor level., • Assist distribution with inventory reporting and job quoting as needed., • Develop Distributors sales personnel to be proficient in selling/offering Mitsubishi products to residential contractors., • Develop Residential Market Strategy for the territory using market data., • Maintain and update all new and existing contractor information in salesforce., • Report to Regional Manager monthly on market conditions and activities., • Grow and develop the Diamond Contractor base with distributor territory managers., • Advanced proficiency in application and installation methods and techniques for new and existing products., • Work with Commercial BU counterparts as needed to capitalize on sales opportunities for the entire ME US product line., • Assist Regional Manager in multiple distributor trainings, performance reviews and shared information sessions., • Consistently serve and exceed the expectation of an assigned Business Unit Champion role., • Work with BU management to develop a personal development path to address strengths and weaknesses to prepare for advancement., • Consistently meet and/or exceed assigned annual performance goals., • Assist in the development process of new hires to help familiarize them in the basic functions of the Area Sales Manager role., • Willing to travel up to 50% within the assigned territory for distributor, dealer, trade organization meetings and outside of the assigned territory for various company meetings., • Bachelor’s degree in related field preferred or related experience, • 5 years+ sale experience preferably in the HVAC industry., • 5 years+ calling on the residential and mechanical contractors., • Familiar with HVAC wholesale and dealer organizations., • Demonstrated communication skills both verbally and written., • Able to understand and execute business plans, (Distributor, Contractor, ETC.)., • Basic to proficient with PowerPoint, Excel, Word, and other Microsoft Office products., • Familiar with salesforce, a plus., • Demonstrated public speaking skills to both small and large groups., • Experience with Continuous Improvement/Lean Organization to include participation in Kaizen event(s)., • Must reside in the Business Unit Territory/Geography., • Valid Driver’s License with acceptable driving record. If hired, employee will be in an “at-will position” and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. To view the EEO is The Law Poster and the supplement, please click here or visit . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.

Job Description Speech Language Pathologist / SLP Location: Culver City Position: Speech Language Pathologist Position Type: Full-Time Remote/Virtual Position: No Coverage Area: Beverly Hills, Hollywood, Inglewood & surrounding areas Find Your Passion and Purpose as an Speech Language Pathologist Salary: Depending on Experience Schedule: 2 days/week Per Diem Offer Based on Years of Experience Responsibilities Reimagining Your Career in Home Health Caring for others is more than what you do — it’s who you are. At AccentCare, you’ll join a purpose-driven, collaborative culture that sets the standard for excellence and gives you the trust and tools to do your best work. You’ll belong to a team that cares deeply for patients and each other; a team committed to consistently providing exceptional care. We’re proud to be named one of America’s Greatest Workplaces 2025 by Newsweek — a reflection of our shared commitment to excellence, integrity and compassion as we shape the future of aging in place. When you thrive, so does the community of care we’re building together. Be the Best Speech Language Pathologist You Can Be If you meet these qualifications, we want to meet you! • A degree and an internship from an approved master’s program in Speech-Language Pathology or as required by applicable law and/or regulation, • Meet the education and experience requirements for a Certificate of Clinical Competence in Speech-Language Pathology, granted by the American Speech-Language Pathology, granted by the American Speech-Language-Hearing Association (ASHA) Required Certifications and Licensures: • Certified to practice Speech-Language Pathology, with a minimum of one (1) year’s clinical experience in Speech-Language Pathology, • Must possess and maintain valid CPR certification while employed in a clinical role, • Valid driver’s license and an automobile that is insured Our Investment in You Caring for others starts with caring for you. We’re committed to fostering a purpose-driven workplace where you feel supported, and that means prioritizing your physical, financial and mental well-being. Our benefits include: • Medical, dental, and vision coverage, • Paid time off and paid holidays, • Professional development opportunities, • Company-matching 401(k), • Flexible spending and health savings accounts, • Wellness offerings such as an employee assistance program, pet insurance, and access to Calm, a meditation, sleep, and relaxation app, • Programs to celebrate achievements, milestones, and fellow employees, • Company store credit for your first AccentCare-branded scrubs for patient-facing employees, • And more! Qualifications Come As You Are At AccentCare, you’re part of a community that cares — for patients and each other. You can rest assured we offer equal employment opportunities regardless of race, ethnicity, sex, sexual orientation, gender identity, religion, national origin, age or disability.

Job Description Overview Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: El Monte Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond!. What You’ll Do * Provide high-touch administrative support to three senior executives across multiple functions * Manage complex scheduling across internal and external stakeholders * Handle all travel logistics as needed for hybrid travel schedules and external offsites * Act as gatekeeper and facilitator: triaging incoming requests and communications * Prepare materials such as presentations, reports, and internal documentation * Coordinate domestic and international travel logistics * Own internal meeting prep, agendas, and post-meeting follow-ups * Help organize and execute events for executive team and external onsite meetings * Assist with personal tasks on occasion to support executive bandwidth * Take on special projects and process improvement initiatives that increase leadership productivity * Adapt quickly to shifting priorities and make judgment calls in ambiguous situations What We’re Looking For * 5-7+ years of experience supporting senior executives * Incredible organizational skills, attention to detail, and time management * A natural problem-solver who is calm under pressure and thrives in fast-paced environments * Able to handle confidential information with discretion * Skilled at juggling multiple projects while keeping nothing from slipping through the cracks * Emotionally intelligent and able to build trust and rapport with senior leaders * Proficient with tools like Microsoft Office Suite, Confluence, and modern productivity software * Driven, curious, and eager to take on more responsibility over time Compensation For this role, the target salary range is $100,000 - $135,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here Equality Opportunity Employment It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionHadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role We are seeking a skilled and driven Electrical & Controls Engineer to join Hadrian’s Special Projects division, a team dedicated to building cutting-edge, custom automation work centers for bespoke processing needs. This role is focused on the design, development, and commissioning of specialized work centers that support high-precision, scalable manufacturing. As part of this team, you will work directly with tooling engineers, software engineers, and project and program managers to bring advanced production systems from concept to operation. You’ll be immersed in the technical aspects of automation, ensuring seamless integration of hardware and software across new manufacturing capabilities. What You’ll Do * Lead the electrical and controls design for advanced automated manufacturing systems, including CNC, robotic, and tooling cells. * Develop and maintain PLC applications using Beckhoff TwinCAT 3 or Siemens TIA Portal. * Integrate and commission a variety of industrial robots and sensors using industrial protocols such as EtherCAT, PROFINET, OPC-UA, and MQTT. * Design and debug control panels to industrial standards (NFPA 79, UL 508A). * Design and create HMI interfaces. * Perform onsite commissioning, troubleshooting, and system optimization, including mentoring junior engineers and codifying best practices. What We’re Looking For * Expertise in PLC programming (IEC 61131-3) and motion control, especially with TwinCAT 3 or TIA Portal. * Proficiency in robotic systems integration with ABB, Fanuc, Yaskawa, or Kuka platforms. * Experience designing and commissioning electrical systems and panels to industrial safety standards. * Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11. * Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis. What Will Set You Apart * Experience with high-level programming languages such as C# or Python to extend platform capabilities. * Proficiency in designing and deploying machine vision systems using platforms like Zivid, LMI, Keyence, or Cognex. * Familiarity with secure industrial networking and real-time data acquisition systems. * Experience integrating MES systems and working with data pipelines (REST, MQTT). Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. Compensation Range: $165K - $220K

Job Description K2 Space is building large, high-powered spacecraft for the next generation of space development. Backed by Lightspeed Venture Partners, Altimeter Capital, and many others ($200M raised to date), we intend to mass produce the highest-powered satellite platforms ever built for missions across LEO to Deep Space. The rise of launch vehicles like Falcon 9 and Starship enables the move from an era of mass constraint to one of mass abundance. We believe this new era requires spacecraft with a fundamentally different design in order to fully utilize the massive rockets coming to market. We're a team that believes the future lies in building large, high-powered satellites that can handle multiple orbits. This is a necessity if we ever want to develop the solar system, and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series B space startup, we'd love for you to apply. The Role Our enterprise software team builds the digital backbone that powers K2 Space's satellite design, manufacturing, and mission operations. We develop tools that connect engineering, production, and mission control into a seamless ecosystem — enabling our hardware to get from concept to orbit faster than ever before. We're seeking a Senior Technical Product Manager to lead the strategy and development of our internal platforms and developer tools. This role requires a strategic thinker with a strong technical foundation, capable of shaping scalable, data-driven solutions in collaboration across teams. You will be comfortable operating from first principles and iterating rapidly toward platform maturity. Key Responsibilities • Define and maintain a forward-looking product roadmap aligned with company priorities. Balance near-term deliverables with long-term technical investments to support scalability and operational excellence., • Drive the development and launch of high-impact platform features. Clearly articulate problem statements, success criteria, and expected outcomes. Ensure solutions are adopted and deliver measurable value., • Champion technical excellence across software architecture designs and implementation, CI/CD pipelines, build/test automation, and code management systems. Ensure platform reliability, security, and performance. Identify opportunities for automation and process validation., • Establish key performance indicators (e.g., build duration, test failure rates, deployment frequency). Lead initiatives to improve developer productivity and system efficiency through data-informed decision-making., • Ensure integration across toolchains and developer workflows and promote best practices across the organization., • Lead Agile ceremonies to maintain clear visibility into short-term progress and long-term goals., • Effectively communicate platform strategy, priorities, and trade-offs to stakeholders at all levels. Translate complex technical topics into clear business value., • Define processes and templates for customer interactions such as intake, triage, prioritization., • 5+ years of product management or equivalent technical experience, with at least 3 years focused on internal platforms or developer productivity tools., • 3+ years of hands-on working experience supporting physical product manufacturing., • Strong technical understanding of CI/CD, version control, build/test automation, and developer toolchains (e.g., Jenkins, Gitlab CI/CD or GitHub Actions, artifact repositories)., • Demonstrated success in managing complex technical products, driving product strategy, and aligning cross-functional teams., • Data-driven decision maker with experience defining and measuring success metrics., • Excellent communication, collaboration, and stakeholder management skills., • Experience in early or growth-stage startups., • Strong analytical and problem-solving capabilities., • Base salary range for this role is $160,000 - $220,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 Space is building large, high-powered spacecraft for the next generation of space development. Backed by Lightspeed Venture Partners, Altimeter Capital, and many others ($200M raised to date), we intend to mass produce the highest-powered satellite platforms ever built for missions across LEO to Deep Space. The rise of launch vehicles like Falcon 9 and Starship enables the move from an era of mass constraint to one of mass abundance. We believe this new era requires spacecraft with a fundamentally different design in order to fully utilize the massive rockets coming to market. We're a team that believes the future lies in building large, high-powered satellites that can handle multiple orbits. This is a necessity if we ever want to develop the solar system, and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series B space startup, we'd love for you to apply. The Role You will contribute to the design, development, and testing of avionics components of major satellite subsystems. This role will support production and development of the K2 Mega-class satellite. You will assemble, test, rework, and integrate harnesses and electromechanical assemblies. Our ideal candidate will be a self-starter and have a high level of attention to detail to ensure quality and reliability of electrical components and systems. Responsibilities * Fabricate wire harnesses from assembly drawings and electrical schematics * Assemble electromechanical assemblies and assist engineering with the development of production processes for first time builds * Follow work instructions / assembly procedures and document work performed through MES system and other tools * Work side-by-side with design and manufacturing engineering in a fast-paced environment * Route harnesses and support integration of electromechanical assemblies on the Mega-class satellite * Support production transition from engineering development and initial production to full rate production * Provide consistent process improvement feedback to engineering and production leadership Qualifications * 2+ years of experience in cable harness fabrication, assembly, or integration * Experience in a manufacturing setting, preferably in aerospace or electronics * Proficiency in MS Office suite, and shop floor management software * Demonstrate high level of ownership and problem-solving abilities * Able to set up and use a torque wrench and other hand tools such as: wrenches and safety wire pliers * Experience performing crimping, wire stripping, continuity testing, connector pin outs, routing, and tie wrapping * Experience using test and measuring tools (digital multimeter, caliper, micrometer) * Familiar with ERP and part traceability * Ability to adapt to changing work assignments under tight deadlines Nice to Have * IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620) * Hand soldering ability and PCB rework experience * Ability to read, review, and redline electrical schematics and mechanical drawings * Experience with various potting and encapsulation techniques for cables and enclosures * Strong communication skills with ability to communicate hardware and systems problems Additional Requirements * Must be able to work extended hours and/or weekends as needed * Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls * Must be able to lift and carry parts or equipment up to 50 lbs. Unassisted Compensation and Benefits: * Hourly pay range for this non-exempt role is $24– $35 + equity in the company * Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level * Comprehensive benefits package including unlimited paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role Candidates for this role could end up working with a number of our internal products and teams: Flow is Hadrian’s FactoryOS, our core platform comprised of a variety of applications that model, manage, and automate an extremely complex network of factories. Copilot is our suite of manufacturing automation products which automates or accelerates key processes within the factory including quoting, CAM programming, and CMM programming. Factory Automation develops robotic cells for use in our factories and the software that controls them. We have a broad set of applications internally. Candidates interested in redefining manufacturing software will have ample opportunity to do so. What You’ll Do * Scope, architect, implement, and deploy critical applications across multiple product verticals. * Engage in product discovery alongside experts in manufacturing and software- help define what needs to exist and what needs to be better. * Build alongside an incredible team of engineers and operators. What We’re Looking For * Expert in TypeScript and frontend web development, ideally using React and related state management solutions. Deep understanding of the frontend ecosystem. * Strong ability and desire to write high quality code and maintain a high quality codebase. * API design experience (REST & gRPC). * Know how to develop, deploy, and maintain fullstack applications using a modern web stack. * Bias towards action and take pride in your work. * Excited to work in a fast-paced environment with high-stakes and quick iteration cycles. What Will Set You Apart * Have great product intuition and user empathy. You enjoy talking to users. * Have a strong sense of design and execute at a high level with or without design support. * Comfortable jumping into different areas of our stack as needed: Go, Python, C#, C++, etc. * Have experience with data visualization, video games, CAD/CAM software, or 3D environments. * Have demonstrated success with developing and deploying high performance web applications. Compensation For this role, the target salary range is $120,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Overview Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: Commerce Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job DescriptionHadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role We are seeking a skilled and driven Electrical & Controls Engineer to join Hadrian’s Special Projects division, a team dedicated to building cutting-edge, custom automation work centers for bespoke processing needs. This role is focused on the design, development, and commissioning of specialized work centers that support high-precision, scalable manufacturing. As part of this team, you will work directly with tooling engineers, software engineers, and project and program managers to bring advanced production systems from concept to operation. You’ll be immersed in the technical aspects of automation, ensuring seamless integration of hardware and software across new manufacturing capabilities. What You’ll Do * Lead the electrical and controls design for advanced automated manufacturing systems, including CNC, robotic, and tooling cells. * Develop and maintain PLC applications using Beckhoff TwinCAT 3 or Siemens TIA Portal. * Integrate and commission a variety of industrial robots and sensors using industrial protocols such as EtherCAT, PROFINET, OPC-UA, and MQTT. * Design and debug control panels to industrial standards (NFPA 79, UL 508A). * Design and create HMI interfaces. * Perform onsite commissioning, troubleshooting, and system optimization, including mentoring junior engineers and codifying best practices. What We’re Looking For * Expertise in PLC programming (IEC 61131-3) and motion control, especially with TwinCAT 3 or TIA Portal. * Proficiency in robotic systems integration with ABB, Fanuc, Yaskawa, or Kuka platforms. * Experience designing and commissioning electrical systems and panels to industrial safety standards. * Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11. * Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis. What Will Set You Apart * Experience with high-level programming languages such as C# or Python to extend platform capabilities. * Proficiency in designing and deploying machine vision systems using platforms like Zivid, LMI, Keyence, or Cognex. * Familiarity with secure industrial networking and real-time data acquisition systems. * Experience integrating MES systems and working with data pipelines (REST, MQTT). Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. Compensation Range: $165K - $220K

Job DescriptionSalary: $57.15 - $71.43 per hour Position: Dredge Captain Location: Varies Department: Operations Reports to: VP of Dredging Schedule: Full-time, 4 Weeks On/4 Weeks Off Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. THIS ROLE: The Dredge Captain is ultimately responsible for the dredge, the dredge crew, and the daily operation and function of the dredge. This position works closely with the project manager and shoreside staff on planning, daily reporting, crewing, strategizing, and overall project logistics. The dredge captain is responsible for performance of the dredge and how to effectively use resources to make sure schedule and production are driven to accomplish project goals. WHAT YOULL DO: Responsible for all dredging operations of assigned dredge including: * Lead the mobilization and demobilization of the dredge for projects including critical path planning for timelines, necessary parts/consumables, preparing the barge to be towed, etc. * Assist with coordination of site logistics and various moving parts to maximize efficiency and safe operations including tugboats, crew changes, scow timing, etc. * Foster an environment on the dredge of critical thinking relating to safety, efficiencies and production and constantly work to refine and streamline all operations * Work with Project Manager for daily and long-term digging plans and follow up daily on the projects progress to adapt dredging operations accordingly * Comply with all relevant regulations concerning dredge operation Responsible for the overall maintenance and repair as well as general operational state and readiness of assigned dredge including: * Create and maintain an inventory of critical spares for all systems * Maintain a working inventory of all consumables, rigging, lines, etc. Including the logging of all fuels, lubes, potable water along with any other items critical to dredge operations. Coordinating the procurement of those items is also a key responsibility * Assist in development of and own the implementation of all preventative maintenance, inspections, and general task schedules including: greasing, housekeeping, wire gauging, etc. * Lead the Health, Safety, and Environmental compliance of the dredge * Complete Job Safety Analysis (JSA) and/or Activity Hazard Analysis (AHA), near miss and incident reports as necessary, and lead daily safety meetings on board * Lead the purchasing function for all staff on the dredge including reviewing/approving requisitions, proactively planning orders of consumables, checking in items that have been delivered, etc. * Provide daily updates to stakeholders including daily work plans, projects completed, projects forecasted, etc. * Prepare for and lead inspections of the dredge performed by various government agencies such as United States Coast Guard, American Bureau of Shipping (ABS), and Army Corps of Engineers * Lead the dredge through maintenance periods and drydocking by assisting in the creation of work scopes for the shipyard, supervising all contractors/shipyard workers aboard, etc. Responsible for all crew of assigned dredge * Directly supervise all other staff including chief engineers, operators, deckhands, and cooks; and oversee the tugboats working in support of the dredge. * Develop and assign tasks to crew and direct the work * Set work plan for opposite crew shift and follow up the next day * Prepare and submit weekly payroll time sheets * Train crews * Conduct crew evaluations * Address complaints, resolve problems and discipline crew as needed Daily Duties Include, in addition : * Build Dredge Plan with Project Manager * Setting expectations with the Dredge Crew * Review Daily Logs of supplies and inventory levels * Review and approve purchases * Coordinate corrective or routine maintenance activities * Coordinate with Project Manager on logistics for Dredge Project * Brief team on expectations for the day and coaching WHO YOU ARE: Certifications and Other Requirements * NCCCO LBC (Lattice Boom Crawler) Certification * MMC Ordinary Seaman (Preferred) Mental Aptitudes * Demonstrated knowledge of dredging specifications. * Ability to identify and anticipate task sequence conflicts. * Self-motivated team player with a strong work ethic. * Must be able to effectively communicate both written and verbally. * Ability to effectively manage projects that vary in nature and scope. * Strong management and organizational skills. * Strong negotiation skills both verbal and written. * Ability to understand and execute complex oral and written instructions. * Ability to work independently with minimal or no guidance but know when to ask for help. * Ability to multi-task and work efficiently in an environment with many interruptions. * Ability to get along with office staff and crewmembers * Confidence to initiate correspondence with crewmembers and staff. * Work outside as well as on board a vessel. * Must comply with all work rules, including those that pertain to safety and health. Physical Aptitudes * Must meet fit for duty requirements upon job offer (pre-employment physical and drug test). * The employee must meet physical requirements including but not limited to: walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces. * Must be able to climb onto tugs, barges and up and down ladders. * Must be able to work in difficult conditions with exposure to all weather conditions (rain, ice, snow, wind, heat, etc.) * Ability to work when exposed to odors, dust, dirt, mechanical hazards, high noise levels, and potentially hazardous equipment. WHAT WE OFFER: * Competitive Compensation * Generous benefits package including: * Medical * Dental * Vision * Short-term Disability * AD&D/Life Insurance * 401k (with company match) * Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritimeis an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Job Title: Structures Mechanic - Boeing Badge is required. - Renton, WA Job Description As a Structures Mechanic, you will work in an aircraft manufacturing facility specializing in 737 fuselage repair. Your tasks will include installing, sealing, rigging, inspecting, and completing precision and other structural and system components. You will follow drawings, documents, process specifications, quality control requirements, and established procedures to ensure the highest standards of workmanship. Responsibilities • Perform structural re-work, repairs, and installations on 737 aircraft, focusing on the fuselage, join areas, and doors., • Remove and reinstall fasteners, drill holes to close tolerance, and install rivets and fasteners of various types., • Repair composite panels and replace and repair flight controls., • Fabricate and install doublers and triplers., • 5+ years of experience in sheet metal and aircraft structures repair., • Training will take place in Wichita, KS, or another location as determined We offer competitive pay and ample opportunities for overtime. Our supportive and dynamic work environment provides a chance to work on exciting projects within the aviation industry. Work Environment You will be part of an on-site team, working in a factory environment with shifts that may last 8 to 12 hours, as much as 7 days a week, either from 5 am to 5 pm or 2:30 pm to 2:30 am. Training may occur in various locations, with flights, hotel, and car expenses covered. All work hours are paid, even during periods of waiting for aircraft access. Tools are provided, and there is no dress code requirement. Job Type & Location This is a Contract position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $44.00 - $51.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Dec 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Auto Body Worker Job Description We are seeking a skilled Auto Body Worker with over 2 years of experience in automotive body work. This role involves preparing vehicles by sealing seams, sanding, polishing, and masking areas for paint preparation and light bodywork. Responsibilities • Perform automotive body work with attention to detail., • Seal all seams and prepare units for painting., • Sand, polish, and scuff areas on vehicles prior to paint application., • Mask and tape vehicles for paint preparation., • Conduct light bodywork as required.Essential Skills, • Minimum of 2 years of experience in autobody work., • Proficiency in paint preparation, masking, and sanding., • Experience in automotive painting and body shop operations.Additional Skills & Qualifications, • Bilingual in Spanish is preferred but not required.Why Work Here? Join a county contractor offering a stable and long-term position with benefits and opportunities for upward mobility. Enjoy a supportive work environment where your skills can grow and develop. Work Environment Work in a professional automotive body shop setting, focusing on quality and precision. The role involves standard business hours, with a focus on teamwork and collaboration. Job Type & Location This is a Contract to Hire position based out of South El Monte, California. Job Type & Location This is a Contract to Hire position based out of South El Monte, CA. Pay and Benefits The pay range for this position is $21.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South El Monte,CA. Application Deadline This position is anticipated to close on Dec 16, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Food Services Worker Job Description We are seeking a dedicated Food Services Worker to assist with assembling patient meals and washing dishes in a hospital cafeteria environment. This role includes duties such as pots and pans maintenance and working on the tray line. Responsibilities • Maintain and operate dishwashing machines effectively., • Ensure kitchen cleanliness and sanitation are upheld to high standards., • Assist in pots and pans maintenance., • Participate in tray line service., • Experience in cleaning, janitorial, and sanitation tasks., • Knowledge of food safety practices., • Experience as a maintenance technician., • Experience in cafeteria and food service environments., • Ability to perform general labor tasks. Join a long-term opportunity with a major local hospital and services company that values growth and promotes from within. Be part of a team that is expanding and offers you a chance to grow your career. Work Environment Work in a dynamic hospital kitchen and cafeteria services environment where safety and cleanliness are prioritized. Job Type & Location This is a Contract position based out of Whittier, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Whittier,CA. Application Deadline This position is anticipated to close on Dec 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Hadrian — Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role As a foundational member of our software engineering team, you'll work closely with our product, operations, data, and robotics teams to make Flow, our FactoryOS, the factory platform of the future. Flow is composed of a variety of internal and external critical business applications. Internally, we build software that informs, augments, and replaces work that needs to be done in the factory — for example, taking a customer request for parts, analyzing the complexity and cost, load balancing the work based on factory capacity, and returning a dynamic price quote and delivery estimate. Externally, our software helps our customers interface with Hadrian and manage their supply chain in real time. Note: You do not need to have aerospace, defense, or manufacturing experience to excel in this role What You'll Do * Scope, architect, implement, and deploy critical applications that will drive revenue and make a positive impact in the world * Own a product vertical with the opportunity to build a team around yourself over time (if interested) * Work directly with our internal and external customers to drive our roadmap * Get to build alongside an incredible team of engineers, operators, and the best machinists/CAM programmers in the world * Be given autonomy and virtually unlimited room to grow What We’re Looking For * Bias to action, take pride in your work, and care more about getting to the right solution than being right * Have tech-lead critical projects or initiatives * Have worked on large, complex codebases * Have extensive experience shipping modern, full-stack applications (our front-ends are React/Next/Typescript and back-ends are Go and Python) * Are product-minded and user-driven * Are excited to work in a fast-paced environment with high-stakes and quick iteration cycles * Are a previous or future founder — if you leave Hadrian to start a company we'll do everything to support you, including investing in you and introducing you to Hadrian's investors * Can work from our Los Angeles Factory (Torrance) Compensation For this role, the target salary range is $120,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description California Rehabilitation & Sports Therapy has an exciting new Physical Therapist opportunity with our outpatient ortho clinic in Norwalk. The Role: • Competitive Salary Range: $82,000 to $95,000 annually, • Productivity Incentives up to $9,750 annually Full Benefits: • New Grads Welcome: Mentorship and OCS Clinical Residency Program Available!, • Sign On Bonus and/or Student Loan Reimbursement available to the right candidate!, • 3 Weeks’ Vacation Time + Paid Holidays + Sick Days, • Mentorship and Professional Development programs for all levels of experience, • Easily Achievable Incentives to boost your earning potential, • Continuing Education plus unlimited Medbridge Access, • Work Life Harmony, • Flexible work schedules, • 401(k), • Employee Referral Bonus Program, • Health, Dental, Vision, and Life insurance, • Provide Physical Therapy to patients in an out-patient setting, • Create individualized care plans for each treatment, • Collaborate with colleagues to optimize care, • Grow relationships with your staff and the community you support, • Utilize a state-of-the-art EMR for documentation, reporting, and data collection, • Graduation from a physical therapy curriculum approved by the American Physical Therapy Association., • Outpatient physical & sports therapy, • Manual/Functional focused therapy hands-on, • Acute and Chronic Rehabilitation, • Pre- & Post-Operative Care, • Return to Sport Rehabilitation, • Return to Work Programs As a clinically led organization, we know what matters most to our clinicians. From competitive benefits to operational support to realistic treatment goals, we stand committed to your success! Since our humble beginnings dating back to 1991, we have specialized in support services (like marketing and billing) to more than 30 leading PT brands across 16 states in the western and central portions of the U.S. Our Commitment! We strive to provide exceptional quality care models and solve cost and access challenges for the benefit of, and value to our patients, partners and communities. • Ensure Accessible and Scalable Care, • Keep Commitments & Build Trust, • Advance Growth Objectives, • Provide Personalized Solutions, • Expand Opportunities for Success At PRN, we understand that a patient’s experience is only as good as the care they receive. We strive to foster an atmosphere where our patients feel safe, welcome, and confident in their treatment. We can’t meet that goal without passionate, intelligent, and skilled employees who share our vision. We are constantly on the lookout for team members eager to join a team founded on inclusivity, ambition, and outstanding care. If you are interested in joining our team, apply today! We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Job Description Location: Downtown Los Angeles, CA Job Type: Full-Time / Part-Time Position & Program Summary: We are seeking dedicated primary care/addiction medicine Physician Assistants to join a multidisciplinary, inter-agency team at two multi-service Harm Reduction Health Hubs in Skid Row, Los Angeles. These hubs are designed to provide holistic care for people experiencing street homelessness and who use drugs. The provider will be primarily responsible for direct patient care but will also have the opportunity to take on a leadership role in the implementation of clinical programs aimed at reducing overdose and other drug-related harms, sexually transmitted and other communicable diseases, harms related to interpersonal violence, mental health crises, self-harm, and accidental injury. The provider will deliver transitional primary care, urgent care, and substance use disorder-related care in a low-barrier, open-access outpatient clinic and a ~20-bed short-term community respite space. On-site clinical and social services are rooted in the principles of harm reduction and trauma-informed care. Candidates should demonstrate a strong commitment to providing non-judgmental, patient-centered care to marginalized communities and individuals with complex medical and psychosocial histories, including people experiencing homelessness, people who use drugs, those engaged in sex work, and/or individuals who have been incarcerated. Key Responsibilities: • Conduct comprehensive health evaluations, diagnosis, and treatment for patients experiencing homelessness with co-occurring substance use and mental health disorders., • Provide patient care at various locations on campus (exam rooms, community respite, drop-in spaces, outdoor areas, etc.) and perform episodic street-based care., • Manage acute and chronic illnesses common in the patient population, including heart failure and other cardiovascular comorbidities, hepatitis C, HIV, STIs, complex chronic wounds, etc., • Manage acute intoxication (alcohol, opioids, stimulants), non-life-threatening withdrawal syndromes, post-overdose care, and short-term recuperation following discharge from the ED or hospital (during 12–72 hour respite stays)., • Initiate and manage medications for the treatment of substance use disorders, with emphasis on sublingual and long-acting injectable buprenorphine for opioid use disorder., • Collaborate with nurses, behavioral health specialists, case managers, social workers, and staff from other on-site partner organizations to provide integrated care., • Counsel patients on harm reduction strategies, including overdose prevention, safer drug use practices, drug testing, and naloxone distribution., • Ensure compliance with clinical protocols, quality standards, and regulatory requirements., • Maintain accurate and timely documentation in the electronic health record (EHR)., • Current and unrestricted Physician Assistant license in the state of California., • Current and unrestricted DEA certificate., • Current BLS Certification from American Heart Association or America Red Cross., • Current and unrestricted NPI enrollment., • Board Certified- NCCPA, • At least 2 years of experience as an NP or PA in a clinical setting., • Strong understanding of harm reduction, trauma-informed care, and community public health., • Experience treating and managing medications for opioid, alcohol, and stimulant use disorders., • Comfort in caring for individuals with severe, complex medical and psychiatric comorbidities., • Willingness to work in non-traditional settings, including comfort with episodic street outreach., • Excellent interpersonal and communication skills., • Commitment to serving vulnerable and marginalized populations., • Experience in homeless healthcare or street-based medicine., • Experience with medical respite or recuperative care. Note: If you become a JWCH provider, you may be able to participate in Loan Repayment Program. A majority of our clinics are NHSC approved sites. The National Health Service Corp may be accepting applications Loan Repayment Program awards. The program is open to licensed primary care medical, dental, and mental and behavior health providers who are employed or have accepted an offer of employment at an NHSC-approved site. Awardees receive up to $50,000 in exchange for two years of service if they practice in a HPSA of 14 above (Tier I). Awardees can also receive up to $30,0000 in exchange for two years of service if they practice in a HPSA of 13 and below (Tier II). You will need to contact National Health Service Corp to apply and receive more information. Upon acceptance, you are encouraged to apply to National Health Service Corp for Loan Repayment Program. Employee Benefits: At JWCH Institute, Inc., we believe in taking care of those who take care of others. If you work 30+ hours per week, you’ll enjoy competitive pay and a robust benefits package that includes: • Medical, Dental, Vision, • Monthly employer-sponsored allowance for assistance with health premiums., • Funded Health Savings Account (up to deductible) to assist with carrier-approved medical expenses., • Paid time off (vacation, sick leave) and 13 paid holidays., • 401(k) Safe Harbor Profit Sharing plan., • Mileage reimbursement., • Short- and long-term disability plans (LTD/STD). JWCH Institute, Inc + Wesley Health Centers is an Equal Opportunity and Fair Chance Employer.

Job Description Location: Downtown Los Angeles, CA Job Type: Full-Time / Part-Time Position & Program Summary: We are seeking dedicated primary care/addiction medicine Nurse Practitioners to join a multidisciplinary, inter-agency team at two multi-service Harm Reduction Health Hubs in Skid Row, Los Angeles. These hubs are designed to provide holistic care for people experiencing street homelessness and who use drugs. The provider will be primarily responsible for direct patient care but will also have the opportunity to take on a leadership role in the implementation of clinical programs aimed at reducing overdose and other drug-related harms, sexually transmitted and other communicable diseases, harms related to interpersonal violence, mental health crises, self-harm, and accidental injury. The provider will deliver transitional primary care, urgent care, and substance use disorder-related care in a low-barrier, open-access outpatient clinic and a ~20-bed short-term community respite space. On-site clinical and social services are rooted in the principles of harm reduction and trauma-informed care. Candidates should demonstrate a strong commitment to providing non-judgmental, patient-centered care to marginalized communities and individuals with complex medical and psychosocial histories, including people experiencing homelessness, people who use drugs, those engaged in sex work, and/or individuals who have been incarcerated. Key Responsibilities: • Conduct comprehensive health evaluations, diagnosis, and treatment for patients experiencing homelessness with co-occurring substance use and mental health disorders., • Provide patient care at various locations on campus (exam rooms, community respite, drop-in spaces, outdoor areas, etc.) and perform episodic street-based care., • Manage acute and chronic illnesses common in the patient population, including heart failure and other cardiovascular comorbidities, hepatitis C, HIV, STIs, complex chronic wounds, etc., • Manage acute intoxication (alcohol, opioids, stimulants), non-life-threatening withdrawal syndromes, post-overdose care, and short-term recuperation following discharge from the ED or hospital (during 12–72 hour respite stays)., • Initiate and manage medications for the treatment of substance use disorders, with emphasis on sublingual and long-acting injectable buprenorphine for opioid use disorder., • Collaborate with nurses, behavioral health specialists, case managers, social workers, and staff from other on-site partner organizations to provide integrated care., • Counsel patients on harm reduction strategies, including overdose prevention, safer drug use practices, drug testing, and naloxone distribution., • Ensure compliance with clinical protocols, quality standards, and regulatory requirements., • Maintain accurate and timely documentation in the electronic health record (EHR)., • Current, unrestricted RN and NP license in the state of California., • Current and unrestricted DEA certificate., • Current BLS Certification from American Heart Association or America Red Cross., • Current and unrestricted NPI enrollment., • Board Certified- AANP, ANCC and/or PCNB, NCC or AACN., • At least 2 years of experience as an NP or PA in a clinical setting., • Strong understanding of harm reduction, trauma-informed care, and community public health., • Experience treating and managing medications for opioid, alcohol, and stimulant use disorders., • Comfort in caring for individuals with severe, complex medical and psychiatric comorbidities., • Willingness to work in non-traditional settings, including comfort with episodic street outreach., • Excellent interpersonal and communication skills., • Commitment to serving vulnerable and marginalized populations., • Experience in homeless healthcare or street-based medicine., • Experience with medical respite or recuperative care. Note: If you become a JWCH provider, you may be able to participate in Loan Repayment Program. A majority of our clinics are NHSC approved sites. The National Health Service Corp may be accepting applications Loan Repayment Program awards. The program is open to licensed primary care medical, dental, and mental and behavior health providers who are employed or have accepted an offer of employment at an NHSC-approved site. Awardees receive up to $50,000 in exchange for two years of service if they practice in a HPSA of 14 above (Tier I). Awardees can also receive up to $30,0000 in exchange for two years of service if they practice in a HPSA of 13 and below (Tier II). You will need to contact National Health Service Corp to apply and receive more information. Upon acceptance, you are encouraged to apply to National Health Service Corp for Loan Repayment Program. Employee Benefits: At JWCH Institute, Inc., we believe in taking care of those who take care of others. If you work 30+ hours per week, you’ll enjoy competitive pay and a robust benefits package that includes: • Medical, Dental, Vision, • Monthly employer-sponsored allowance for assistance with health premiums., • Funded Health Savings Account (up to deductible) to assist with carrier-approved medical expenses., • Paid time off (vacation, sick leave) and 13 paid holidays., • 401(k) Safe Harbor Profit Sharing plan., • Mileage reimbursement., • Short- and long-term disability plans (LTD/STD). JWCH Institute, Inc + Wesley Health Centers is an Equal Opportunity and Fair Chance Employer.

Job Description Empowering Wellness, Transforming Lives Optima Medical Management Group is dedicated to enhancing the quality of life by promoting wellness. At Optima MMG and all of its divisions: Serene Health, Community Support, and American TrueCare, our mission is to provide comprehensive support and care that not only addresses immediate concerns but also fosters long-term well-being. As pioneers in the field, we aspire to lead in member care outcomes and set new standards for excellence and innovation. We are committed to empowering our members to achieve self-sufficiency in health, creating a ripple effect that strengthens families and communities. Our work culture at Optima MMG is built on pride, passion, and a collective commitment to making a positive difference in people's lives. Our team members are dedicated problem-solvers who bring their unique skills and perspectives to the table. We believe that by fostering a collaborative and supportive environment, we can unlock the full potential of our team and, in turn, provide the best possible care to our members. A career at Optima MMG is an opportunity to be part of a dynamic and forward-thinking organization. We encourage continuous learning and professional growth, providing our employees with access to industry experts, cutting-edge technologies, and a supportive community that values each individual's contributions. Join us on this journey to not only advance your career but to be a driving force in transforming lives and communities through passionate and fulfilling work! Job Summary: The LCM Supervisor facilitates the efficient operation of the assigned department by performing a variety of clerical and administrative tasks. Supervisory Responsibilities: • Oversees the daily workflow of the department., • Provide constructive and timely performance evaluations. Duties/Responsibilities:, • Conduct audits of each LCM to ensure quality assurance is met according to contract standards., • Assists with the development and implementation of corrective and quality improvement plans that contain content and strategies to address identified problem areas., • Identify the training needs of staff and communicate with the Site Manager to ensure proper training is provided., • Ensure members have an amazing experience including timely access to the care they need (appointments, visits, messages, and calls) and resolving their issues quickly, with minimal waste and friction., • Engage with the team to troubleshoot any technical issues, local problems, or escalating systemic matters to your manager or central teams., • Attend health plan training, webinars, internal meetings, continuing education., • Assist with onboarding new hires in coordination with Human Resources., • Manage meeting preparation, and other administrative support., • Manage communication, with context, between the offices and other districts and health system partnerships., • Aide in the completion of reports requested by the Site Manager., • Performs other duties as assigned. Education and Experience:, • High school diploma or GED required. Bachelor's degree preferred., • Minimum two years working in a professional Health Care environment as a supervisor or manager to include employee reviews, performance management, timekeeping, and coaching., • Prior experience in health care, case management, or Q&A preferred., • A valid Driver's License, reliable daily vehicle and active CA auto insurance are required. Required Skills/Abilities:, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Proficient in Microsoft Office Suite or related software., • Excellent organizational skills and attention to detail., • Ability to work independently., • Ability to problem-solve and maintain confidential information. Physical Requirements:, • Prolonged periods sitting at a desk and working on a computer. Our full-time employees are eligible for the following benefits enrollment after 60 days of employment: Medical, Dental, & Vision Benefits: We have various insurance options for you and your family. Short & Long-Term Disability Benefits: Protection when you need it most. Voluntary Accident, Voluntary Critical Illness, and Voluntary Hospital Indemnity Plans: Added security for you and your loved ones. Flexible Spending Accounts: Manage your finances with flexibility. Employee Assistance Program (EAP): Support when life throws challenges your way. 401(K): Building your financial future with us. Effective after 1 year of employment. Paid Vacation and Sick Leave: Flexibility for the planned and unplanned. Paid Holidays: Quality time to enjoy celebrations. Employee Referral Program: Share the opportunities and reap the rewards. Company Discount Program: Enjoy savings on everyday expenses and memberships. Equal Employment Opportunity Optima Medical Management Group and its divisions are an Equal Opportunity Employer. Optima MMG is committed to providing employment opportunities for all qualified candidates without discrimination on the basis of race, religion, sex, sexual orientation, gender identity, age, national origin, citizenship, disability, marital status, veteran status, or any other characteristic protected by federal, state or local laws. Optima MMG is committed to providing reasonable accommodation for individuals with disabilities. Pre-Employment Optima Medical Management Group is a drug-free workplace. Employment is contingent upon a successful pre-employment drug screening and background check.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role Hadrian's Applications Engineering team develops 0-1 machining solutions to supercharge the throughput and capabilities of our Factory. The team focuses on developing novel solutions for CNC programming, workholding, fixturing, tooling, process control, new materials, and machining capabilities. We are looking for an Applications Engineer to execute our Machining roadmap to scale Hadrian to be multi-factory across the US. You will work closely with Applications Engineering, CAM Operations, Software Engineering, and Robotics to push the boundaries of machining at scale and are looking to add a curious and self-motivated expert to join our already world class team. What You'll Do * Develop New Capabilities – push the limits of programming, machining, workholding, and automation to meet challenging market demands from our customers. * NPI Development – develop 0-1 New Product Introduction parts that are high-risk high-ROI as part of onboarding new customers or new technologies (techniques, materials, part families) . * Subject Matter Expert – as a Subject Matter Expert, you will contribute to the product vision of our Copilot software that super chargers our CAM programmers productivity. You will advise and consult across a range of areas within the factory such as tooling, machine selection, workholding, process engineering, etc. What We’re Looking For * CAM Programming – 5+ years programming aerospace parts * CNC Machine Operation – Ability to run and operate CNC machines including part setup, tool loading, tool offsets, spindle probing * Machining Knowledge – Has applicable experience with a variety of machine types (mills, lathes), materials (alum, stainless, hard metals), tooling application, workholding, and fixture design. * Process Engineering – Has a track record of successfully machining difficult parts with stringent requirements. Understands the pitfalls of operation selection, material removal, tooling application, and material science. * GD&T – Strong understanding of GD&T and engineering print reading. * Communication– Excellent communication skills both written and verbal. What Will Set You Apart * Experience with hyperMILL, Heidenhain, Fanuc, NX, machining Inconel or Titanium, macro programming, mill-turn * Experience with tap testing, FEA analysis, load monitoring, tool life monitoring, in-process inspection * Strongly admired skills - Macro programming, software engineering skills, mechanical design, material science Compensation For this role, the target salary range is $130,000 - $220,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description POSITION TITLE: Medical Coordinator/LVN REPORTS TO: Licensed Vocational Nurse Manager LOCATION: Los Angeles, CA CLASSIFICATION: Non-Exempt SALARY RANGE: $28.25 - $31.25 Hourly Rate PERTINENT INFORMATION: • This position to be filled as soon as possible., • Work Shift: Tuesday - Saturday, 11:30AM-8PM, • Position involves medical coordination and education., • No hands-on care., • NEW GRADS Welcome to apply. Medical Coordinator / Licensed Vocation Nurse The Medical Coordinator works in our Recuperative Care Program to provide post-hospital care, while creating a healthy, safe, and home like environment for guest quality of life. Medical Coordinators have excellent bed side manners, are team players and have a “whatever it takes” attitude. The Recuperative Care Program provides quality and compassionate care and empower those we serve. Responsibilities and Initiatives To help NHF meet its growth goals, the Medical Coordinator will: • Facilitating hospital discharge process and patient assessment/engagement to program., • Performing medical assessment intake and discharge plan of care., • Maintaining current guest chart via existing CRM database daily., • Conducting medical/wellness checks, medication regimen education, preventative measures and medical insurance follow up., • Coordinating and providing linkages for guest’s medical appointments and follow-up., • Collaborate with Intake to ensure appropriate eligible to recuperative services and admission of required DMEs and Home Health needs., • Participating in weekly internal and external case conferencing, board review team meetings, monthly staff meetings, trainings, and in-services., • Provide advocacy on guest behalf when needed and in tandem with LVN manager instructions., • Ability to adequately manage caseload of a minimum 15 guest with flexibility to manage 20 or more to meet the needs of the facility (i.e., vacancies, PTO etc.), • Tracking and completing guest information on existing database specific to progress and plan of care., • Performing administrative tasks such as charting, guest summaries and answering phones., • Complete additional tasks/duties as required to meet the needs of the facility, not to impede primary responsibilities., • Current LVN License or bachelor’s degree in Nursing., • Current American Heart Association BLS (CPR/First Aid/AED)., • Recent work experience with homeless patients (preferred)., • Bilingual in Spanish (preferred)., • Proven ability to stay calm and focused when working under stressful situations., • Experience working with substance abuse and dually diagnosed guests, as well as patients from diverse socio-economic, ethnic, and cultural backgrounds., • Reliable transportation and if applicable, current auto insurance., • Effective communication and social skills are essential to build and maintain relationships with guests and fellow employees., • Proven ability to meet challenging deadlines, prioritize and organize effectively., • Computer proficiency in MS Word, Excel, Outlook, web browser and proficient typing skills. Physical Requirements The duties as described will required frequent standing and walking, as well as extended sitting. The employee will frequently bend/stoop, squat, reach above the shoulders, twist, and turn, kneel, and push/pull. The employee will frequently be required to lift/pull/push/move up to 50 pounds. Must utilize conversational speech for effective verbal communication. Noise level is high in some guest care areas. Must be able to hear equipment alarms, overhead pages, and direct verbal communication. Benefits Be on a team that is full of collaborative, passionate, fun and energetic individuals that are focused on serving the needs of the community. We are proud to offer a comprehensive benefits package including paid time off, 100 % covered medical, dental, vision, life insurance, short-term and long-term disability insurance for the employee; 401(k) plan with up to 5% matching contribution. Feeling hungry during work hours? We got you covered with our snack havens located at all of our facilities! Are you looking to make a meaningful impact to the lives of individuals who are experiencing homelessness? Does empathy and the drive to do good resonate with you personally? If so, then National Health Foundation has a position for you! For further details on other open positions, please visit our site at: .

Job Description Job Title: Lathe Machinist Job Description We are seeking a skilled Lathe Machinist to set up and operate CNC lathe machines. The ideal candidate will have experience with a variety of measuring instruments and controls, ensuring precision and quality in machining operations. Responsibilities • Set up and operate CNC lathe machines., • Utilize measuring instruments such as micrometers, depth gauges, height gauges, dial calipers, and optical comparators to ensure accuracy., • Proficiency in CNC lathe operations., • Experience in mill and lathe setups, particularly in the aerospace industry., • Ability to interpret blueprints and utilize Fanuc and Haas controls., • Background in a machine shop setting. Join a family-owned business that values its employees and offers a range of benefits, including comprehensive health, dental, and vision coverage, a 401k profit-sharing program, and tuition reimbursement. Enjoy a supportive work environment with potential flex hours, annual events like summer picnics and holiday parties, and quarterly employee lunches. Benefit from paid holidays, sick days, and increasing paid time off with tenure. Work Environment The position is based in a machine shop environment where graphite is handled; wearing a mask is required due to the nature of the material. Employees can expect to work in shifts with potential openings on the 2nd shift (2pm - 10:30pm). Job Type & Location This is a Contract to Hire position based out of Long Beach, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Long Beach,CA. Application Deadline This position is anticipated to close on Dec 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Location: Downtown Los Angeles, CA Job Type: Full-Time / Part-Time Job Summary: We are seeking dedicated primary care/addiction medicine physicians to join a multidisciplinary, inter-agency team at two multi-service Harm Reduction Health Hubs in Skid Row, Los Angeles. These hubs are designed to provide holistic care for people experiencing street homelessness and who use drugs. The physician will be primarily responsible for direct patient care but will also have the opportunity to take on a leadership role in implementing clinical programs aimed at reducing overdose and other drug-related harms, sexually transmitted and other communicable diseases, harms related to interpersonal violence, mental health crises, self-harm, and accidental injury. The physician will provide transitional primary care, urgent care, and substance use disorder-related care in a low-barrier, open-access outpatient clinic and a ~20-bed short-term community respite space. On-site clinical and social services are rooted in the ethos of harm reduction and trauma-informed care. Candidates should demonstrate a commitment to providing non-judgmental, patient-centered care to marginalized communities and individuals with complex medical and psychosocial histories, including people experiencing homelessness, those who use drugs, engage in sex work, and/or have been incarcerated. Key Responsibilities: • Conduct comprehensive health evaluations, diagnosis, and treatment for patients experiencing homelessness with co-occurring substance use and mental health disorders., • Provide patient care at various locations on campus (exam rooms, community respite, drop-in spaces, outdoor areas, etc.) and perform episodic street-based care., • Manage acute and chronic illnesses common in our patient population, including heart failure, other cardiovascular conditions, hepatitis C, HIV, STIs, and complex chronic wounds., • Manage acute intoxication (alcohol, opioids, stimulants), non-life-threatening withdrawal syndromes, post-overdose care, and short-term recuperation following discharge from the ED or hospital (during 12–72 hour respite stays)., • Initiate and manage medications for the treatment of substance use disorders, with emphasis on sublingual and long-acting injectable buprenorphine for opioid use disorder., • Collaborate with nurses, behavioral health specialists, case managers, social workers, and staff from other on-site partner organizations to provide integrated care., • Counsel patients on harm reduction strategies, including overdose prevention, safer drug use practices, drug testing, and naloxone distribution., • Ensure compliance with clinical protocols, quality standards, and regulatory requirements., • Maintain accurate and timely electronic health record (EHR) documentation., • Current and unrestricted California Physician & Surgeon License, • Current and unrestricted California DEA registration., • Current BLS Certification from American Heart Association or American Red Cross, • MD or DO degree from an accredited medical school., • Current and unrestricted NPI enrollment., • Strong understanding of harm reduction, trauma-informed care, and community public health., • Experience treating and managing medications for opioid, alcohol, and stimulant use disorders., • Comfort in caring for people with severe, complex medical and psychiatric comorbidities., • Willingness to work in non-traditional settings, including comfort with episodic street outreach., • Excellent interpersonal and communication skills., • Commitment to serving vulnerable and marginalized populations., • American Board of Addiction Medicine (ABAM) certification, • Experience in homeless healthcare or street-based medicine. Note: If you become a JWCH provider, you may be able to participate in Loan Repayment Program. A majority of our clinics are NHSC approved sites. The National Health Service Corp may be accepting applications Loan Repayment Program awards. The program is open to licensed primary care medical, dental, and mental and behavior health providers who are employed or have accepted an offer of employment at an NHSC-approved site. Awardees receive up to $50,000 in exchange for two years of service if they practice in a HPSA of 14 above (Tier I). Awardees can also receive up to $30,0000 in exchange for two years of service if they practice in a HPSA of 13 and below (Tier II). You will need to contact National Health Service Corp to apply and receive more information. Upon acceptance, you are encouraged to apply to National Health Service Corp for Loan Repayment Program. Employee Benefits: At JWCH Institute, Inc., we believe in taking care of those who take care of others. If you work 30+ hours per week, you’ll enjoy competitive pay and a robust benefits package that includes: • Medical, Dental, Vision, • Monthly employer-sponsored allowance for assistance with health premiums., • Funded Health Savings Account (up to deductible) to assist with carrier-approved medical expenses., • Paid time off (vacation, sick leave) and 13 paid holidays., • 401(k) Safe Harbor Profit Sharing plan., • Mileage reimbursement., • Short- and long-term disability plans (LTD/STD). JWCH Institute, Inc + Wesley Health Centers is an Equal Opportunity and Fair Chance Employer.

Description The Journey Clinic RN provides comprehensive nursing care for patients in an ambulatory care environment based on individual physical, emotional, spiritual needs, and appropriate care strategies throughout the lifespan. This position facilitates care coordination by using the nursing process to assess, identify, plan, implement, and evaluate all aspects of care and teaching needs via direct and telephonic/telehealth or electronic encounters. Providence caregivers are not simply valued - they're invaluable. Join our team at Providence Saint John's Medical Foundation and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. Required Qualifications: • Graduate of an accredited registered nursing school, • Associate's Degree - Nursing or,, • Bachelor's Degree - Nursing or related field., • California Registered Nurse License upon hire., • National Provider BLS - American Heart Association within 30 days of hire., • Provider Pediatric Advanced Life Support (PALS) - American Heart Association upon hire. Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act." About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 397556 Company: Providence Jobs Job Category: Patient Care (Non-Acute) Job Function: Clinical Care Job Schedule: Full time Job Shift: Day Career Track: Nursing Department: 7008 HEMATOLOGY ONCOLOGY CA SANTA MONICA Address: CA Santa Monica 2021 Santa Monica Blvd Work Location: SJHC Physician Clinic 2021-Santa Monica Workplace Type: On-site Pay Range: $47.33 - $73.48 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Job Description 🌟 Join Our Team as an Environmental Services Aide 🌟 Make a Difference Every Day in a Clean, Safe, and Caring Environment We’re looking for a dedicated Environmental Services Aide to help maintain a clean, safe, and friendly environment for our patients, visitors, and staff. Your work will directly contribute to the comfort and well-being of everyone in our facility. 🧹 What You’ll Do • Keep patient rooms, nursing stations, lounges, restrooms, offices, and clinic areas clean and sanitized., • Follow established procedures to ensure high standards of cleanliness and safety., • Create a warm and welcoming atmosphere for patients and guests., • Be a vital part of a team that values respect, compassion, and excellence.💪 What You Bring, • Experience in janitorial or housekeeping duties (sweeping, mopping, sanitizing)., • A strong sense of responsibility and reliability., • Basic English communication skills., • A friendly attitude and commitment to customer service. This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Dec 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Responsibilities Howmet Fastening Systems (HFS) is seeking a CNC Operator I for the Fullerton, CA site. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. \n • Performs precision operation and set-up on CNC Grinders Milling machines, and Lathes, and runs manual support equipment. \n, • Able to resolve tooling manufacturing issues causing quality errors and slowdowns. \n, • Able to use complex fixtures for work holding on all machines. \n, • Must be able to teach and train others on numerous CNC and conventional machines. \n, • Able to complete one off jobs to exacting tolerances without direct supervision. \n, • Maintains a clean and orderly workplace in accordance with 5S standards \n, • Active involvement in Autonomous Maintenance program. Perform Preventative Maintenance per daily schedule \n, • Responsible for producing and maintaining high level quality parts \n, • Complete a first piece verification form per part number \n, • Perform Lock/Out Tag/Out (LOTO) \n, • Check all work with appropriate measuring tools, make offsets and edits as required Assist with training and development of entry level operators \n, • Active involvement in continuous improvement initiatives \n\n Qualifications Basic Qualifications: \n • Able to read and interpret documents as well as blueprints, and micrometers, to work from process drawings and sketches, and perform SPC \n, • Operate CNC grinders, mills, and lathes , can set-up difficult surface and cylindrical fixtures on machines. \n, • Excellent troubleshooting skills, and good communication skills \n, • Willing to cross train and/or assist other departments to meet facility goals \n, • Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required \n, • This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee \n\n Physical Demands: \n • Must be able to lift/move 30 lbs. (may not exceed per EHS policies) \n, • High School Diploma or GED equivalent\n, • Three to 5 years' experience in CNC machining Fastener aerospace experience \n, • Mastercam programming experience\n\n Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $17.64 to $29.46 per hour. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Job Description Join Cedars-Sinai! Cedars-Sinai has been named to the Honor Roll for the ninth consecutive year and tied for #1 in California and Los Angeles in U.S. News & World Report’s “Best Hospitals 2024-25” rankings, as well as placed among the very best in 11 specialties nationwide. Align yourself with an organization that has a reputation for excellence! Cedars-Sinai was awarded the National Research Corporation’s Consumer Choice Award 19 years in a row for providing the highest-quality medical care in Los Angeles. We were also awarded the Advisory Board Company’s Workplace of the Year. This recognizes hospitals and health systems nationwide that have outstanding levels of employee engagement. Join us! Discover why U.S. News & World Report has named us one of America’s Best Hospitals. Why work here? Beyond outstanding employee benefits including health and dental insurance, vacation, and a 403(b), we take pride in hiring the best employees. Our accomplished staff reflects the culturally and ethnically diverse community we serve. They are proof of our dedication to creating a dynamic, inclusive environment that fuels innovation. Are you ready to bring your clinical proficiencies to a world-class Medical Group known for the very highest clinical standards? Do you have a passion for the highest quality and patient satisfaction? Then please respond to this dynamic opportunity available with one of the best places to work in Southern California! We would be happy to hear from you. The Cedars-Sinai Medical Network is committed to helping primary care and specialist physicians provide excellent care to all their patients, who benefit from convenient access to primary and specialty care physicians and seamless coordination of care between them. As a part of Cedars-Sinai, our physicians and staff are partners in quality health care from a medical center that is consistently recognized as one of the finest hospitals in the country. For the 8th consecutive year, we have been named one of the top 20 Physician Groups in Southern California by Integrated Healthcare Associates (IHA). What will you be doing in this role? The LVN supports the physician and nursing staff in the delivery of health care by performing patient care assessments, and a variety of medically related tasks. The LVN is a licensed nurse who works in an ambulatory care setting to provide nursing services. Primary Duties and Responsibilities • Sets up exam room/procedure rooms appropriately based on patient visit needs, • Performs initial nursing intake and prepares patients for examination., • Prepares patients for examination by reviewing current medications and reviewing documents in medical record., • Prepares medical chart and records patient information needed to support the reason for visit such as vital signs and reason for visit., • Coordinates prescribed medications, injections, or IV medications using standard process and as advised by provider., • Provides basic patient care and treatments such as taking vitals, performing diagnostic tests, phlebotomy, and specimen collection advised by the provider., • Observes patient, documents, and reports any changes in condition to the provider for instructions in taking vital actions for care., • Evaluates nursing intervention outcomes within the LVN scope of practice., • Maintains patient care flow., • Answers patient and physician incoming messages with provider input., • Serves as a patient advocate and applies appropriate resources to support patient care., • Provides review of MA skills and performance abilities using designated evaluation tools., • Performs quality assurance and quality control measures to maintain compliance in the clinical environment., • Assists as a chaperone when needed upon completion of the required Chaperone Training., • Valid CA LVN license required, • BLS from the American Heart Association and/or the American Red Cross required (BLS expiration date has to be valid 60 days start date) Req ID : 11557 Working Title : LVN - Urology- Beverly Hills -$3,000 Sign On Bonus Department : Urology - La Cienega Business Entity : Cedars-Sinai Medical Care Foundation Job Category : Nursing Job Specialty : Nursing Overtime Status : NONEXEMPT Primary Shift : Day Shift Duration : 8 hour Base Pay : $28.53 - $44.22

JOB DESCRIPTION Job Summary \n Provides screening, preventive primary care and medical care services to members - primarily in non-clinical settings where members feel most comfortable, including in-home, community and nursing facilities and “pop up” clinics. Strives to ensure member progress toward desired outcomes and contributes to overarching strategy to provide quality and cost-effective member care. \n Essential Job Duties \n • Provides general medical care and care coordination to various and/or specific patient member populations – adult, women’s health, pediatric, and geriatric., • Performs comprehensive evaluations including history and physical exams for gaps in care and preventive assessments., • Addresses both chronic and acute primary care complaints, and demonstrates ability to ascertain medical urgency., • Establishes and documents reasonable medical diagnoses., • Seeks specialty consultation as appropriate., • Orders/performs pertinent diagnostic laboratory and radiology testing for the medical diagnosis or presenting symptoms; works within an environment of limited resources and therefore uses diagnostic tests judiciously and appropriately., • Understands when a member's needs are beyond their scope of knowledge and when physician oversight is needed., • Creates and implements a medical plan of care., • Schedules appointments for visits when appropriate., • Provides post-discharge coordination to reduce hospital readmission rates and emergency room utilization., • Performs face-to-face in-person visits in a variety of settings including in-home, skilled nursing facilities, and public locations., • Performs face-to-face visits via alternative modalities based on business need, leadership direction and state regulations., • Orders bulk laboratory orders to target specific member populations., • Performs alternating on-call coverage to triage any urgent lab results and pharmacy inquiries and develops appropriate plans of care., • Participates in community-based “pop up clinics” to build relationships with communities, and address gaps in health care., • Drives up to 120 miles a day on a regular basis to a variety of locations within the assigned region. Drives beyond 120 miles as part of extended mileage may be required on special project days. Special projects may include an overnight hotel stay., • Obtains and maintains cross-state license in other states besides home state based on business need., • Collaborates with fellow nurse practitioners to develop best practices to perform work duties efficiently and effectively., • Actively participates in regional meetings., • May prescribe medications and perform procedures as appropriate., • Performs timely medical records documentation in electronic medical record (EMR) computer system., • On occasion, may be required to walk flights of stairs while carrying up to 50 lbs. of equipment., • Engages in practices constituting the practice of medicine in collaboration with and under the medical direction and supervision of a licensed physician to the degree required by state laws., • Local travel required (based upon state/contractual requirements). \n Required Qualifications \n • At least 1 year of experience as a nurse practitioner, or equivalent combination of relevant education and experience., • Active and unrestricted national certification from one of the following organizations: American Academy of Nurse Practitioners (AANP) or American Nurses Credentialing Center (ANCC)., • Current state-issued license to practice as a Family Nurse Practitioner (FNP). License must be active and unrestricted in state of practice., • Prescriber Drug Enforcement Agency (DEA) license with authority to prescribe per state qualifications. License must be active and unrestricted in state of practice., • Current Basic Life Support (BLS) certification., • Valid and unrestricted driver's license, reliable transportation, and adequate auto insurance for job related travel requirements., • Ability to work within a variety of settings and adjust style as needed - working with diverse populations, various personalities and personal situations., • Ability to work independently with minimal supervision and demonstrate self-motivation., • Responsive in all forms of communication., • Ability to remain calm in high-pressure situations., • Ability to develop and maintain professional relationships., • Excellent time-management and prioritization skills; ability to focus on multiple projects simultaneously and adapt to change., • Excellent problem-solving and critical-thinking skills., • Strong verbal and written communication skills., • Microsoft Office suite/applicable software program(s) proficiency, and electronic medical record (EMR) experience. \n Preferred Qualifications \n • Experience as a registered nurse or nurse practitioner in a home health, community health or public health setting., • Experience in home health as a licensed clinician, especially in management of chronic conditions., • Experience with underserved populations facing socioeconomic barriers to health care., • Immunization and point of care testing skills., • Bilingual. To all current Molina employees: If you are interested in applying for this position, please apply through the Internal Job Board. Molina Healthcare offers a competitive benefits and compensation package. Molina Healthcare is an Equal Opportunity Employer (EOE) M/F/D/V \n #PJNurse Pay Range: $101,721 - $198,356 / ANNUAL *Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level.

Job DescriptionESSENTIAL DUTIES AND RESPONSIBILITIES: Include but are not limited to the following, as additional duties and responsibilities may be assigned. • Provide a courteous and professional relationship with all customers, vendors, co-workers and managers. “Treat others as you would want to be treated.”, • Accurately complete and submit all required paperwork for each shift, including vehicles in and out, if applicable., • Accurately cash out tickets, if applicable., • Immediately report any damages incurred, and any claims of damage incurred reported by customer to their vehicle, and/or complete an incident report., • Accurately clock in/out at scheduled work times, using the manual time card or electronic time clock, as applicable., • Report any maintenance required, such as potholes, missing or broken signage, or other hazards, or any vehicles meeting impound criteria to supervisor, if applicable., • Alert supervisor to any and all unusual circumstances at the facility., • Maintain a clean station, or location, ensuring that trash and debris are cleared from the location throughout the day., • Maintain onsite signage displays as directed, keeping all components clean and in good repair, if applicable., • Maintain a neat, professional appearance at all times. While on the job, wear the designated uniform required, and display identification badge., • Regular, consistent attendance during scheduled work hours and the ability to work overtime if requested., • With the exception of scheduled legal rest and meal breaks, remain visible to tenants and guests to greet and provide information to guests. To successfully perform this job, an individual must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma, or General Education Degree (GED), or one to three months related experience or training desirable. An equivalent combination of education and experience is acceptable. Must be comfortable with data entry, using electronic devices. Licenses: Valid state-issued driver’s license and proof of insurance card. May be required to pass a company driving skills test. Language Skills: Able to read, write and comprehend simple instructions, short correspondence and memos in English. Able to effectively communicate in one-on-one and small group situations, such as customers, clients, or other employees of the organization. Mathematical Skills: Able to add, subtract, multiply and divide, using whole numbers, to compute costs of parking and make change. Able to perform these operations using units of American money. Able to keep records according to prescribed system. May be required to use adding machine, calculator, or cash register. Reasoning Ability: Able to apply common sense when performing duties and following written and oral instructions. Ability to deal with problems involving a few variables in standard situations. Physical Demands: While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk or run, and sit. The employee is occasionally required to climb, balance, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: Frequent exposure to wet and/or humid conditions, fumes, or airborne particles and outside weather conditions. The work environment noise level is usually moderate and occasionally loud. Other: Able to transfer/relocate to another facility/location without notice at any time. Note: All employees are subject to internal audits to ensure compliance of all policies and procedures related to recording, handling and depositing of money received and of other duties assigned. In the event an employee fails an internal audit, the consequence may be disciplinary action, up to and including termination of employment. Salary: We maintain broad salary ranges for our roles in order to account for variations in experience, training skills, geographic location, and market conditions, as well as to reflect our differing products and lines of business. The pay range referenced is as of the time of the job posting. Benefits: Full-Time Employees For full-time employees, we offer a comprehensive benefits package (subject to elections and eligibility) that includes Medical, Dental, Vision, Health Savings Accounts and/or Flex Spending Accounts, Employer Provided Life and AD&D Insurance, Voluntary Life Insurance and AD&D, Employer Provided Long-Term Disability Insurance, Voluntary Short-Term Disability Insurance, Personal Accident Plan, Employee Assistance Program, Non-Qualified Deferred Compensation Plan, and Tuition Reimbursement. We offer 8 paid holidays per calendar year, paid sick leave, and paid vacation once eligibility requirements are met. Part-Time Employees: The company offers paid sick time to all employees once eligibility requirements are met. We are committed to a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Company Name: RighTime Home Services Overview: Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: San Pedro Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: ___.

Company Name: RighTime Home Services Overview: Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: Commerce Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: ___.

Company Name: RighTime Home Services Overview: Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: Baldwin Park Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: ___.

Job Description Job Title: Medical Assistant / X-Ray Technician Job Description We are seeking a dedicated and skilled Medical Assistant / X-Ray Technician to join our urgent care facility. The ideal candidate will assist in providing quality patient care and ensure smooth operations in a fast-paced environment. Responsibilities • Check in and check out patients efficiently., • Conduct imaging and x-rays., • Record vital signs and log information into the EMR/EHR system (NexGen)., • Verify patient insurance details accurately., • Cover the front desk duties when the receptionist is on lunch break., • Experience in appointment scheduling and patient care., • Proficiency in using Electronic Health Records, specifically NexGen., • American Heart Association (AHA) Basic Life Support (BLS) certified., • Bilingual skills are advantageous., • Experience in imaging and radiology is a plus., • Must pass an integrity test. The urgent care facility operates seven days a week, with hours from 10 AM to 10:30 PM. Employees work three 12-hour shifts per week. The environment is fast-paced, handling approximately 40-45 patients daily. Dress code is professional and appropriate for a medical setting. Job Type & Location This is a Contract to Hire position based out of West Covina, California. Job Type & Location This is a Contract to Hire position based out of West Covina, CA. Pay and Benefits The pay range for this position is $30.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in West Covina,CA. Application Deadline This position is anticipated to close on Dec 17, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role The Quality Specialist is a hands-on inspector role within our Quality Operations group. You will focus on first article inspections, visual and mechanical inspection, CMM report verification, and nonconformance management for aerospace and defense components. Your work ensures that new parts and processes are stable, capable, and ready for production. For this role, we are hiring for the 2nd Shift here at Hadrian. What You’ll Do * Perform first article inspections (FAI) and provide detailed feedback on new parts * Conduct visual inspection of bare and coated parts to verify finish and cosmetic requirements * Carry out mechanical inspection of parts using precision measurement tools * Analyze and verify CMM reports for accuracy and conformance * Write, disposition, and verify nonconformance reports (NCRs) * Triage and escalate out-of-tolerance conditions in production * Generate customer shipment documentation to ensure compliance with requirements * Partner with programmers, engineers, and technicians to drive stable, in-tolerance production What We're Looking for * 1+ years of experience in mechanical or quality inspection * Demonstrated ability to perform inspections with a high degree of accuracy and efficiency * Experience using precision measurement tools (calipers, micrometers, height gauges, etc.) * Familiarity with CMM inspection results * High level of experience with reading and interpreting GD&T * Strong attention to detail and ability to communicate findings clearly What Will Set You Apart * Hands-on experience writing and dispositioning NCRs * Experience supporting aerospace or defense manufacturing * Knowledge of AS9100 or related quality management systems * Familiarity with PC-DMIS (equivalent to level 1) or other CMM programming environments * Experience working with optical inspection systems and high precision gauges Compensation For this role, the target salary range is $28 - $39/HR (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of L.A. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR [here ](). Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description Description Opens bulk product, places product on production line, infeed to cookers. Operates infeed product to cookers. Manually feed product to conveyor belt. Understands and follows Good Manufacturing Practices (GMP’s) and good housekeeping practices. Performs all duties in a safe and efficient manner; wears appropriate PPE as required for the task and follows all JSAs, SOPs and SSOPs. Demonstrates integrity and honesty in all business activities with employees, visitors and vendors. Reliable and consistent attendance is an essential function of this job; must be available to work any shift, overtime or holidays as required; may be required to cover the absence of other personnel. Perform other duties as assigned. Skills Production, General labor, Packaging, food manufacturing, Machine operation, Packing Top Skills Details Production,General labor,Packaging,food manufacturing Additional Skills & Qualifications Able to work weekends Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of South Gate, CA. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Gate,CA. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Company Name: RighTime Home Services Overview: Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: El Monte Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Company Name: RighTime Home Services Overview: Pay: $19 - $21 per hour + commission Earning potential: $20 – $30/hour on average with commission Location: Monterey Park Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role The CMM Programmer (PC-DMIS) will play a critical role in advancing Hadrian’s automated inspection capabilities. You will program and optimize PC-DMIS routines for highly complex prismatic parts for the aerospace and defense industries, ensuring precision and reliability in our New Product Integration (NPI) and production workflows. Unlike traditional shops, the programs you create will run on fully automated CMM cells designed to operate lights-out. This means your work must incorporate robust programming practices and controls to ensure reliability. You’ll also collaborate with our software automation teams, who have engineer layered controls to safeguard and standardize the programming approach. This is a unique opportunity to work at the frontier of CMM automation and help shape the future of metrology in aerospace manufacturing What You'll Do * Create and optimize PC-DMIS programs for New Product Integration (NPI) work orders * Interpret and apply GD&T requirements from engineering drawings; identify and resolve discrepancies * Collaborate with cross-functional teams (CMM technicians, Quality, Manufacturing Engineering, CAM programmers) to drive inspection excellence * Design fixtures to support automated inspection * Troubleshoot PC-DMIS programs and improve Hadrian’s internal specifications * Support prove-outs of highly complex geometries with custom probes and setups * Partner with software teams to identify and implement process improvements What We’re Looking For * High school diploma or equivalent * 2+ years of experience as a PC-DMIS programmer * 2+ years of experience interpreting engineering drawings * Experience working in a machine shop with knowledge of metrology for subtractive manufacturing processes What Will Set You Apart * PC-DMIS training (101, 201, or beyond) * Strong understanding of GD&T, datum structures, and tolerances (form, orientation, location, profile, runout) * CAD software experience (NX preferred) * Background as a machinist or exposure to 5-axis machining environments * PC-DMIS API / VB scripting expertise * Familiarity with automated inspection processes and integration of customer specifications Compensation For this role, the target salary range is $83,000- $189,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * 100% coverage of platinum medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. Compensation Range: $83K - $189K

Description RN PACU/ Recovery at Providence Saint John's Health Center in Santa Monica, CA. This position is Per Diem and will work 12-hour, Variable shifts. Join Providence Saint John's Health Center, recognized as one of the best regional hospitals in 17 types of care by U.S. News & World Report and honored by Newsweek and Healthgrades for exceptional clinical quality. Be a part of our distinguished team dedicated to excellence in patient care. We are on the Magnet journey, and we were just awarded a 5-star rating for quality, safe care from the Centers of Medicare and Medicaid Services (CMS). Providence nurses are not simply valued - they're invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page. Join our team at Saint Johns Health Center. As a Providence caregiver, you'll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care. Required Qualifications: • Graduation from an accredited nursing program., • Upon hire: California Registered Nurse License, • Upon hire: National Provider BLS - American Heart Association, • National Provider ACLS - American Heart Association upon hire:, • National Provider PALS - American Heart Association upon hire: Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act." About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 403286 Company: Providence Jobs Job Category: Nursing-Patient Facing Job Function: Nursing Job Schedule: Per-Diem Job Shift: Variable Career Track: Nursing Department: 7006 PSJHC RECOVERY Address: CA Santa Monica 2121 Santa Monica Blvd Work Location: Providence Saint John's Health Ctr-Santa Monica Workplace Type: On-site Pay Range: $54.85 - $87.70 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Description RN Operating Room at Providence Saint John's Health Center in Santa Monica, CA. This position is Full-time and will work 12-hour, Day shifts. Join Providence Saint John's Health Center, recognized as one of the best regional hospitals in 17 types of care by U.S. News & World Report and honored by Newsweek and Healthgrades for exceptional clinical quality. Be a part of our distinguished team dedicated to excellence in patient care. We are on the Magnet journey, and we were just awarded a 5-star rating for quality, safe care from the Centers of Medicare and Medicaid Services (CMS). Providence nurses are not simply valued - they're invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page. Join our team at Saint Johns Health Center. As a Providence caregiver, you'll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care. Required Qualifications: • Graduation from an accredited nursing program., • California Registered Nurse License upon hire., • National Provider BLS - American Heart Association upon hire. Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act." About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 404795 Company: Providence Jobs Job Category: Nursing-Patient Facing Job Function: Nursing Job Schedule: Full time Job Shift: Day Career Track: Nursing Department: 7006 PSJHC SURGERY Address: CA Santa Monica 2121 Santa Monica Blvd Work Location: Providence Saint John's Health Ctr-Santa Monica Workplace Type: On-site Pay Range: $54.85 - $87.70 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Description $10,000 hiring bonus for eligible external hires that meet required qualifications and conditions for payment. Relocation available for qualified external candidates. Join Providence Saint John's Health Center, recognized as one of the best regional hospitals in 17 types of care by U.S. News & World Report and honored by Newsweek and Healthgrades for exceptional clinical quality. Be a part of our distinguished team dedicated to excellence in patient care. Radiation Therapist at Providence Saint John's Health Center in Santa Monica, CA. This position is Full time and will work 8-hour, Day shift. Join Providence Saint John's Health Center, recognized as one of the best regional hospitals in 17 types of care by U.S. News & World Report and honored by Newsweek and Healthgrades for exceptional clinical quality. Be a part of our distinguished team dedicated to excellence in patient care. We are on the Magnet journey, and we were just awarded a 5-star rating for quality, safe care from the Centers of Medicare and Medicaid Services (CMS). Administers prescribed dose of ionizing radiation according to physicians written prescription and established departmental policy and procedures. Performs adjuvant procedures which aid in the management of patient care. Providence caregivers are not simply valued - they're invaluable. Join our team at Saint Johns Health Center and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. Required Qualifications: • Coursework/Training: Graduate of an approved American Registry of Radiologic Therapy Program or equivalent educ/experience, • Upon hire: National Certification from American Registry of Radiologic Technologists, • Upon hire: California Diagnostic and Therapeutic Radiologic Technology Certification or Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act." About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 393388 Company: Providence Jobs Job Category: Radiation Therapy Job Function: Clinical Care Job Schedule: Full time Job Shift: Day Career Track: Clinical Professional Department: 7006 PSJHC RADIATION ONC Address: CA Santa Monica 2121 Santa Monica Blvd Work Location: Providence Saint John's Health Ctr-Santa Monica Workplace Type: On-site Pay Range: $49.40 - $76.68 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Description RN - Definitive Step-Down Unit at Providence Mission Hospital in Mission Viejo, CA. This position is Full-time and will work 12-hour Night shifts. Providence Mission Hospital in Mission Viejo has received Magnet designation in 2012, 2017, 2021 and are in the process of earning our fourth designation in 2025! This is a prestigious designation from the American Nurses Credentialing Center (ANCC), which recognizes organizations that provide the highest-quality care. Only eight percent of hospitals nationwide have achieved Magnet designation. We are also recognized as one of the best regional hospitals in 18 types of care by U.S. News & World Report, including orthopedic and gastroenterological care. Our hospital is also honored with awards for cardiac surgery, gastrointestinal surgery, and excellence in women's services by Healthgrades and Newsweek. Providence nurses are not simply valued - they're invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page. Join our team at Mission Hospital Regional Medical Center. As a Providence caregiver, you'll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care. Required Qualifications: • Graduation from an accredited nursing program., • Upon hire: California Registered Nurse License., • Upon hire: National Provider BLS - American Heart Association., • Upon hire: National Provider ACLS - American Heart Association., • Upon hire: National Institutes of Health Stroke Scale Certificate - NIH Stroke Scale Training Course. Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 400625 Company: Providence Jobs Job Category: Nursing-Patient Facing Job Function: Nursing Job Schedule: Full time Job Shift: Multiple shifts available Career Track: Nursing Department: 7500 MH DSU Address: CA Mission Viejo 27700 Medical Ctr Rd Work Location: Mission Hospital Mission Viejo Workplace Type: Hybrid Pay Range: $53.25 - $82.68 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.