Commercial electrical jobs in White Plains, New YorkCreate job alerts

Job Description Maintenance Technician- $25/per hour The Maintenance Technician is a key member of our Facilities team who will help provide a safe and clean environment inside and outside of our Community Center. Daily job responsibilities/functions to include, but not limited to: *Performing routine maintenance around the building such as fixing structural damage, for example, window, door or wall repair • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures, • Working on damaged electrical wiring when a shortage or severed wire occurs, • Maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly, • Applying preventative measures to the building to reduce the risk of future problems, such as using a sealant on a flat roof, • Fixing potential safety hazards to avoid injuries, • Painting the building when old paint has become faded or chipped, • Check for unlocked doors and windows, report any unauthorized occupants, turn off lights. * Perform cleaning and related activities such as removing snow or debris from sidewalks and stairs in areas within sixteen feet of buildings using shovels. * Attend to emergencies when necessary. * General maintenance of facility and grounds, including periodic painting and minor repairs. * Other routine maintenance duties as assigned, • Clean and sanitize bathrooms * Restock supplies in bathrooms, break rooms and common areas. * Empty all trash cans and replace liners, clean receptacles as necessary. * Setup rooms for meetings, classrooms, conferences, events, etc. and reset accurately to another plan following room use. * Strip, clean, buff and apply floor sealer and floor finish to hard surface floors as directed * Lock and unlock building: secure building when facilities are not in use. REQUIREMENTS * Excellent, demonstrated experience with room set ups, cleaning, and general custodial duties in an institutional setting, preferably a school setting or house of worship. * Good communication and interpersonal skills. Absolutely essential is a demonstrated attitude of flexibility with changing needs/demands within the context of the job and a bright and cheerful disposition, since there is much contact with our membership. * Punctual and reliable attendance in accordance with schedule. * Good customer service skills and positive energy. * Ability to read and follow oral and written instructions and set-ups. * Ability to prioritize multiple tasks. * Ability to work effectively and cooperatively with the team, taking instruction/guidance and offering assistance willingly. * Ability to work independently, as needed, to support the group effort. * Strong knowledge of cleaning products and best practices for using products and equipment, such as stripper machinery, vacuums, sanitizers, paints and spackle. • The work requires routine walking, standing, bending, carrying items weighing up to 50 pounds * Occasional work on ladders. * Moving items over fifty pounds utilizing a team lift * Must be authorized to work in the US., • Must have two years of recent maintenance experience in residential/commercial buildings, establishments or institutions. Must be willing to submit to background check

Job Description • We are hiring immediately for a full time BUILDING MAINTENANCE WORKER position., • Location: IBM Learning Center - 20 Old Post Road, Armonk, NY 10504 Note: online applications accepted only., • Schedule: Full time schedule. Monday - Friday, morning shift. More details upon interview., • Fixed Pay Rate: $30.32 per hour. Free meals, uniforms and laundering service available at select locations. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1473766. The advertised program is an AI recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! What makes FLIK click? Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow them. It starts with hiring people who share our passion for food and hospitality. Once we find the right talent, we encourage, value and recognize their contributions. We keep our people renewed, excited and engaged by providing hands-on training and educating them about the latest trends. We give them a stake in successfully raising the bar. Our people love what they do and they love sharing their passion. Join our team and see the FLIK difference. Where a job isn’t merely a job but the start of a career where you can flourish. Job Summary Summary: Ensures day-to-day upkeep, maintenance and smooth operation of the building and campus. Essential Duties and Responsibilities: • Provides quality service with attention to detail., • Cleans and polishes furniture and fixtures., • Performs minor repairs to doors, fixtures and furniture., • Makes adjustments and minor repairs to heating, cooling, ventilating, plumbing and electrical systems., • Cleans and restores building interiors damaged by fire, smoke or water using commercial cleaning equipment., • Monitors building security and safety by locking doors after operating hours and checking electrical appliance use., • Moves heavy furniture, equipment and supplies., • Mows and trims lawns and shrubbery; clears debris., • Notifies managers about the need for major repairs or additions to building operating systems., • Removes snow from sidewalks, driveways and parking areas; applies snow-melting chemicals., • Requisitions supplies and equipment for cleaning and maintenance duties., • Sets up, arranges and removes decorations, tables, chairs, ladders and scaffolding to prepare facilities for special events., • Sprays insecticides and fumigants to prevent insect and rodent infestation., • Monitors contract cleaning crew's work., • Cleans building floors by sweeping, mopping, scrubbing or vacuuming; gathers and empties trash; services, cleans, and supplies restrooms., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license. Associates at FLIK are offered many fantastic benefits. Both full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Flik maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications: Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description Job Title: Field Service A Technician Job Description Utilize your mechanical capabilities to perform maintenance on commercial and industrial boilers in the NYC/Long Island area. Work alongside an experienced, factory-trained technician who will provide instruction on all areas of repair and maintenance. Responsibilities • Perform maintenance on commercial/industrial boilers., • Work with experienced technicians to learn repair and maintenance procedures., • Utilize electrical, mechanical, and troubleshooting skills in daily tasks., • Conduct preventive maintenance and repair tasks., • Engage in field service and field engineering activities., • Interpret schematics and blueprints for maintenance and repair., • 5+ years of experience in boiler maintenance, combustion, and basic boiler circuits., • Technical/vocational school training in HVAC or industrial boilers., • Extensive knowledge of industrial boiler operations and maintenance., • Excellent analytical and problem-solving skills., • Strong mechanical skills., • Experience with PLC controls and tank monitoring systems., • Understanding of BMS basics. Join a growing company in the boiler and heating solutions industry in Westchester. Enjoy opportunities to grow into sales and advance your career quickly within a family-oriented company. Work Environment Fieldwork environment involving travel with an experienced technician. Work in both hot and cold environments. Each candidate will receive their own car and tools for travel. Job Type & Location This is a Contract to Hire position based out of Mount Vernon, New York. Job Type & Location This is a Contract to Hire position based out of Mount Vernon, NY. Pay and Benefits The pay range for this position is $25.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mount Vernon,NY. Application Deadline This position is anticipated to close on Dec 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.

Job Description Fire Protection Engineer General Firm Description OLA Consulting Engineers, PC is a mid-sized consulting engineering firm with offices in New York City and Westchester County, NY. Established in 1974, OLA Consulting Engineers, PC is a financially secure company that has a longstanding reputation of excellent engineering, a solid base of repeat clients, and a growing list of new clients. Our firm provides mechanical and electrical design services, energy modeling/analysis, and commissioning services for commercial, industrial and institutional facilities. We place special emphasis on high performance building design and energy efficient systems. Our projects include new construction, retrofits, and renovations. As the continuing education and development of our team is paramount in our effort to deliver innovative engineering solutions, OLA provides excellent mentoring and on-site, as well as off-site, training for continuous skill enhancement. For additional information, please visit our web site at . Job Description OLA has an immediate need for fire protection engineers [PL1] with five to eight (5-8) years of U.S. Consulting experience in fire protection system design services including but not limited to water-based and non-water-based systems, fire pumps, and fire alarm systems. The candidate shall be responsible for conducting building code reviews and analyses, performing and reviewing hydraulic calculations. The candidate will be expected to work closely and coordinate with teams in both the NYC and Westchester Offices and be available in both offices as needed. Responsibilities will include field investigation, analysis, design, production of contract documents, management and direction of junior engineers, construction administration services, and project management services. The candidate shall be able to work on multiple projects and must have great communications skills for relating to clients, other design professionals, contractors, vendors and his/her peers. Qualifications: • Minimum: Bachelor of Science in Mechanical Engineering or Fire Protection Engineering., • Five to Eight years of US Consulting Engineering experience will be considered., • Familiarity with New York State and New York City codes as well as International Building Codes, • PE Preferred, or ability to obtain., • Experience in fire protection sprinkler and standpipe system design and performing hydraulic calculations in accordance with applicable codes and standards., • Experience in the preparation of construction documents including floor plans and specifications., • Experience conducting building code analyses, on-site investigations and inspections., • Working knowledge of AutoCAD required, knowledge of Revit a plus, • Demonstrated capabilities in professional service business processes., • Excellent oral and written communication skills. At OLA, we provide a very competitive compensation and benefits package. The following is a partial list: • Medical, dental, vision and prescription plans, • Disability and Life insurance plans, • 401(k) with employer contributions, • Profit sharing, • Competitive salary, • Overtime pay, • Tuition assistance, • Continuing professional development, • Paid Vacation, • Paid Holidays, • Paid Sick/Personal time Job Type: Full-time Pay: From $36.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Professional development assistance, • Tuition reimbursement, • Vision insurance Schedule: • Monday to Friday Education: • Bachelor's (Required) Experience: • AutoCAD: 1 year (Required), • Revit: 1 year (Preferred) Work Location: In person

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: Traveling Journeyman Electrician Responsible for the installation of electrical systems in the commercial construction markets at job sites and small/medium project locations. Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis. Responsible for promoting excellent customer relations. Must be able to interact with the customer, determine their needs and provide solutions. Job Responsibilities • Report to project worksite on time and ready to work., • Exhibit a willingness to apply oneself, to learn, and to develop electrical skills., • Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided., • Complete work in accordance to national and local codes. Learn and keep current with latest revision of NEC., • Complete work in accordance with company policies and procedures., • Fulfill daily commitments and stay on project schedule as directed by job-site foreman., • Assist with loading materials, digging trenches, pulling wire through conduit, and other various tasks needed to complete project., • Treat all customers, other trades personnel, vendors, fellow workers, etc. with dignity and respect., • Keep job site clean before leaving and be kept clutter free during the work., • Complete paperwork including timecard and turn in when required., • Know, follow and hold others accountable to the safety policy, program and training of CESG., • Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits., • Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes., • Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring., • Measures, cuts, bends, threads, assemble, and installs electrical conduit., • Travel is a must., • Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps., • Connects wiring to lighting fixtures and power equipment., • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels., • Connects power cables to equipment, such as electric range or motor, and installs grounding leads., • Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement., • Repairs faulty equipment or systems., • High School Graduate or G.E.D. equivalent., • 4 years’ experience in electrical project installations., • Applicant must have reliable transportation., • Position requires electricians hand tools., • Ability to work with hands, multi-task., • Advanced electrical knowledge required., • Valid state motor vehicle operator's license & clear driving record to meet Company policy., • Applicable state certification. BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations TQVdO2jvI1

Project Manager – Mechanical / HVAC Our client, a growing leader in mechanical, HVAC, and energy-efficiency projects across New York City is seeking an experienced Project Manager to join a hands-on, operations-driven team. This firm is a Licensed Master Plumber, Oil Burner Installer, General Contractor, and Con Edison Multifamily Partner. Their work spans oil-to-gas conversions, CHP systems, boiler installations, re-pipes, heating controls, monitoring systems, energy-efficiency retrofits, and emergency service for residential and commercial buildings. If you're looking for a place where your experience will be recognized and your impact will be felt, this role offers a strong platform for growth. What You’ll Do As a Project Manager, you will oversee mechanical and HVAC installation projects from planning through completion. Responsibilities include: • Lead and support an Assistant Project Manager (APM)., • Review project plans, bid documents, scopes of work, and budgets., • Develop and maintain project schedules to ensure on-time delivery., • Obtain necessary permits, inspections, and signoffs., • Schedule, coordinate, and supervise installation crews and subcontractors., • Track budgets, labor, and material usage to meet financial targets., • Manage the full contract scope and ensure all items are completed., • Prepare and estimate project change orders; coordinate approvals with clients., • Work closely with vendors and suppliers for equipment and services., • Attend project meetings with architects, engineers, customers, and city agencies., • Coordinate site access with building management and property teams., • Build and maintain strong relationships with customers and project partners., • Provide end-user training on equipment following project completion., • Maintain all project logs, spreadsheets, and documentation. What You Bring • 5+ years of experience in construction project management with a focus on mechanical or HVAC installations., • Strong knowledge of boiler systems, steam and hydronic heating, domestic hot water systems, pumps, gas/fuel systems, mechanical code, plumbing, and basic electrical., • Experience with hydronic boilers, cooling systems, chillers, fans, and controls is a plus., • Familiarity with project management software (Asana, BuildOps preferred)., • Excellent written and verbal communication skills., • Highly organized, detail-oriented, and proactive, with strong follow-through., • Ability to make independent decisions and keep projects on track., • Engineering background is a plus — Engineers are encouraged to apply. If you’re ready to join a team where your expertise matters and your career can grow, we’d love to hear from you.

Job DescriptionNEW YORK METRO AREA Established in 1978, Digital Media Systems, Inc. (DMS) is a recognized leader providing best-in-class audiovisual solutions to the motion picture, post-production, distribution, and broadcast fields. Position OverviewThe commercial Cinema Technician is a full-time position that directly supports our efforts to provide world-class service to our wide range of clients, including commercial and independent theater owners, private and corporate screening rooms, post-production facilities, universities, museums, and more. With a focus on cinema, you’ll work with a passionate and talented group of field technicians and installers to take commercial AV projects from concept to creation, and subsequently operate and maintain those systems, once in place. This is a permanent, full-time, benefited position. Job Responsibilities • Identify and diagnose audiovisual presentation issues and equipment failures., • Provide remote and onsite support/troubleshooting assistance and guide non-technical theater and venue staff, communicating step-by-step instructions in understandable terms., • Complete routine and emergency onsite equipment service and preventative maintenance, including but not limited to equipment installation, consumable and part replacement, deep cleaning of projection system and optics, and device firmware updates and backups., • Perform routine calibration of video/imaging and audio equipment, including but not limited to image luminance/color calibration, image geometry/focus adjustment, graphic equalization, synchronization, and SPL measurement of audio channels., • Ensure the highest industry presentation quality standards are met at high profile film premieres, screenings, and other special events., • Daily travel throughout the New York metro area and occasionally out of town/out of state.Mandatory Qualifications, • Read, interpret, diagnose and affect repair of semi complex electronic equipment, e.g. printed circuit boards, power supplies, multiplexing systems, amplifiers, etc., • Provide technical guidance and training for above to other technicians., • Printed Circuit Board (PCB) / Electronics Repair SkillsMinimum Qualifications, • 3+ years’ experience operating/servicing professional audiovisual equipment., • Comprehension of AV system schematics, signal flow, and modern audio and video formats., • Experience with AV and electrical test equipment, including but not limited to: light meters, colorimeters/spectroradiometers, oscilloscopes, real-time analyzers (RTA), SPL meters, signal generators, and multimeters., • Demonstrate modern computing skills, including experience with Windows and macOS, and competencies in word processing, spreadsheets, data entry, and research., • Experience configuring and troubleshooting basic wired and wireless networks., • Excellent verbal and written communication skills., • Ability to work diligently, calmly, and professionally, under tight run-of-show deadlines., • Valid driver’s license and reliable transportation., • Flexibility in scheduling with a willingness to work nights, weekends, and holidays (paid) depending on business needs., • Ability to engage in physical activity, including lifting (up to 50lbs), standing for long periods, walking up and down stairs, and climbing ladders/scaffolding., • Must be authorized to work in the United States.Preferred Qualifications, • Knowledge and proficiency with commercial Digital Cinema equipment, including Christie, Barco, NEC, Sony, Dolby/Doremi, GDC, QSC/USL, etc., • Experience with DSP systems, audio over IP, and other distributed audio systems such as Q-SYS/Q-LAN, AES67, Dante, etc., • Understanding of control systems, such as Q-SYS, Crestron, Extron, AMX, etc, and third-party control methods and equipment such as electrical relays/switches, contact closure, GPIO, and TCP/UDP IP control., • Experience with commercial digital signage systems and LED walls., • Ability to solder and terminate cables and connectors., • CTS and related professional certifications.We Offer, • Starting salary: $70,000-$95,000+/year, commensurate with experience., • Additional compensation: annual bonus based on performance., • Benefits: Health insurance, 401K, PTO in addition to sick days and paid holidays., • 401(k), • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off Digital Media Systems, Inc. is an equal opportunity employer. We value diversity and encourage applications from all qualified candidates. Only shortlisted candidates will be contacted for interviews. Join us to lead with impact and help shape the future of Digital Media Systems, Inc. About Us Digital Media Systems, Inc. is a leading provider of audio-visual solutions for the motion picture industry. We have represented the high-profile interests of Hollywood film studios, postproduction, and cinema exhibition facilities, as well as industry defining product manufacturers. Our goal is to provide superior products, technologies, support, and services to the entertainment industry in an efficient and comprehensive manor. Visit us at for more information about our company and offerings.