Trabajos common en Rochester, NYCrear alertas

Job Title: Registered Nurse I Department: Interventional Radiology Location: Rochester General Hospital Hours Per Week: 36 Hours Schedule: Mon - Fri (Days) plus on-call (Evenings/Weekends) Sign-On Bonus: Up to $15,000 SUMMARY: As a Registered Nurse (RN), you’re the engine and the heart of patient care at Rochester Regional Health. You make a positive difference every single day in the lives of our patients, their family members and visitors – going above and beyond to meet their needs with courtesy, kindness, respect and compassion. Interventional Radiology (IR) is a cutting-edge specialty that uses advanced imaging technologies to perform minimally invasive procedures, often replacing the need for traditional surgery. Common treatments include uterine fibroid embolization, kyphoplasty, tumor ablation, and targeted therapies like chemoembolization and thrombolysis. IR offers faster recovery, fewer risks, and innovative solutions for complex conditions. RESPONSIBILITIES: * Provides high-quality, patient-centered, clinical care * Performs initial and ongoing assessment of the patient, utilizing appropriate data (i.e. physical, psychological, educational and risk-screen data appropriate for the chronological / developmental age of the patient). * Communicates and documents assessment of patient with the interdisciplinary team. Utilizes all available resources in order to meet the needs of the patient and family. * Develops and documents plan of care, treatment and services which is individualized and appropriate for the patient needs, strengths, limitations and goals. * Complies with organizational policies, procedures and protocols including policies governing safety, medication administration and documentation. * Revises plan of care based on ongoing evaluations and updates documentation appropriately. * Completes at least one clinical research utilization (CRU) form for submission to Nursing Research Department utilizing a research article from the last 5 years from research performed in the United States. COMPLIANCE: * Completes a minimum of 5 nationally approved contact hours (CNE or CEU) per year. * Completes mandatory in-services and health screens in timely manner. * Maintains Basic Life Support (BLS) certification. REQUIRED QUALIFICATIONS: * Diploma or Associate’s Degree in Nursing * Registered Nurse license in New York State. * Basic Life Support (BLS) certification. PREFERRED QUALIFICATIONS: * Bachelor’s Degree in Nursing preferred. * At least 6 months RN experience preferred EDUCATION: AS: Nursing (Required) LICENSES / CERTIFICATIONS: BLS - Basic Life Support - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA), RN - Registered Nurse - New York State Education Department (NYSED)New York State Education Department (NYSED)New York State Education Department (NYSED) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations. PAY RANGE: $37.18 - $49.92 CITY: Rochester POSTAL CODE: 14621 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Job Title: Specimen Management Tech Department: Specimen Processing Location: Elmgrove Park | 160 Elmgrove Park Hours Per Week: 40 Schedule: 5pm - 1:30am OR 6pm -2:30am Laboratory and pathology services are vital to the diagnosis, treatment and prevention of disease. With convenient patient laboratory service centers, home lab services, expert pathologists and in-hospital diagnostics, we offer the full range of testing services to the communities we serve. SUMMARY: As a Specimen Management Tech, your excellent attention to detail and communications skills are crucial to prompt and accurate specimen analysis and patient care. RESPONSIBILITIES: • Laboratory Work - Prepare laboratory samples for testing; operate imaging system as appropriate; communicate with departments and physicians regarding laboratory testing, results and sample requirements; prepare specimens and paperwork accurately for transfer and testing done in other departments., • Data Entry - Enter and label laboratory samples in an accurate and timely manner; retrieve requisitions as requested; maintain a manual filing system for outpatient/inpatient requisitions., • Computer knowledge - Maintain knowledge and competency in necessary computer systems and have a working knowledge of common operating systems in many areas of the department. PREFERRED QUALIFICATIONS: • Data entry and computer skills preferred., • Medical terminology and understanding of billing issues preferred. EDUCATION: LICENSES / CERTIFICATIONS: PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $19.40 CITY: Rochester POSTAL CODE: 14624 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Job DescriptionDescription: The health services that became the Anthony L Jordan Health Corporation (Jordan Health) began more than 100 years ago, in 1904. As one of the first 5 Federally Qualified Health Centers (FQHC) established in the nation, its roots are steeped in service to those who face barriers to health and health care, meeting their need for comprehensive medical, dentistry, behavioral health, and community services. Starting in northeast Rochester, NY, Jordan Health has since expanded to become a network of primary care offices and health centers serving residents living in three quadrants of Rochester, NY and in Canandaigua, N.Y. Jordan Health is now seeking a Psychiatric NP/PA who, under the guidance of the Director of Social Emotional and Mental Health/Practice Chief, is primarily responsible for providing behavioral health care to patients and family in collaboration with primary care physicians, physician assistants and nurse practitioner colleagues throughout the Jordan Health Care setting. Provides comprehensive behavioral health evaluations, consultations with providers, assists with coordination of care either within the Jordan Health Care setting or referrals to community mental health centers. Performs in short term, episodic model, under the regulations of the Department of Health. If you want to apply your specialized experience and education in an environment where you can make a difference and significantly impact patients’ quality of life, please consider our Psychiatric NP/PA opportunity. Requirements: The Psychiatric NP/PA will ensure to: · Obtain psychosocial and behavioral health history on patients upon family medicine referral, throughout lifespan. · Complete physical and mental health assessment according to need and established clinical guidelines. · Provide counseling specific to developmental needs including symptom management, medication compliance, substance use, risk reduction, family planning, school/work issues and family/relationship issues. · Manage common acute behavioral health illnesses, chronic behavioral illness and health maintenance needs, using of clinical laboratory and diagnostic tests/imaging and procedures. · Help to advocate for patients' needs within the health care system and with community agencies. · Refer to specialty services as appropriate, including makes community mental health referrals when long term care is needed. · Assist Family Medicine and Behavioral Health staff in planning future activities of the Department, implementing and assessing Department activities. · Assist in orientation and precepts graduate nursing students, residents, medical students and new staff as needed, when applicable. · Comply with NYS guidelines regarding licensing, prescriptions, and record keeping. · Complete duties as assigned. Education and Experience Required: · Masters Degree in Family Psychiatric Nurse Practitioner, Physician Assistant in Psychiatric Mental Health. · One year of clinical experience working within the field of substance abuse and/or behavioral health. · Preferred candidates will have experience working with chronic mental illness. · Experience working with multicultural backgrounds. Licenses and Certifications: · NYS RN, NPP, PA licensure; National Certification. · BLS through the American Heart Association · NYS Infection Control Certification Special Skills, Knowledge Required: · Bilingual preferred. Benefits: Jordan Health offers a competitive salary and full benefits offering including medical, dental, vision, life insurance, and 403b retirement plan. We offer Professional Development allowance. Jordan Health offers equal opportunities to all persons without regard to race, color religion, age, sex, disability, national origin, ancestry, citizenship, military or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics or genetic information, or any other status protected by law. About Jordan Health: Jordan Health is an independent FQHC, with Level III Patient-Centered Medical Home (PCMH) designation through the National Committee on Quality Assurance. Jordan Health receives funding from the Health Resources and Services Administration (HRSA) of the U.S. Department of Health and Human Services. Jordan Health is a network of outpatient primary care offices with providers who follow a panel of patients. While independent, Jordan Health actively collaborates with the major hospital and healthcare systems in our operating area to provide a total safety net of healthcare services.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Maintenance Mechanics will work independently and with other plant personnel to perform preventative, predictive and routine maintenance tasks. They will troubleshoot issues, repair failures of production and facilities equipment, and ensure maximum equipment efficiency and effectiveness. All tasks will be performed while supporting the policies, goals and objectives of the company. responsibilities: • Execute all job duties with a strong safety mindset. Follow all permitting, job safety, and food safety programs and procedures every time., • Troubleshoot, repair and maintain plant machinery and equipment such as valves, conveyors, compressors, packers, fillers, palletizers, filters, membranes, separators, blow molders, labeling, and pumps., • Troubleshoot, repair or replace control devices such as switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters, etc. as needed., • Perform work order repairs, preventive maintenance inspections and repairs, equipment rebuilds and adjustments., • Able to set up and operate welders, drill press, grinder, hand tools and other metal working equipment., • Fabrication, innovation and modification of new and existing equipment., • Create work orders for equipment repairs that include parts and document labor hours, • Participates in plant safety, health and environmental programs. The minimum requirements for education and experience are listed below. Consideration will be given to individuals with an equivalent combination of education and experience. • Have at least 3 years' experience with hydraulics, pneumatics, mechanics and basic electrical repair., • Ability to read and interpret documents, schematics and drawings., • Ability to write detailed repair reports as well as good verbal communication., • Post-secondary education and/or a technical trade certificate is an asset., • Experience in the operation of a food beverage plant is an asset. Regular use of a variety of machines and tools is essential. Standing for extended periods is common. Hearing and vision within normal range is important for conversations, to receive ordinary information and to prepare or inspect documents, manuals and drawings. Strong math and reasoning ability is essential. Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business. • Sitting/Standing/Walking: Stands, walks and sits during completion of job responsibilities over a 12-hour shift., • Lifting/Carrying: Ongoing lifting requirements as job demands. Must be able to lift a minimum of 50 lbs. on an occasional basis., • Pushing/Pulling: Ongoing pushing or pulling requirements., • Bending/Stooping: Ongoing bending and stooping requirements., • Squatting/Kneeling/Crawling: Ongoing kneeling or crawling requirements., • Twisting/Turning: Ongoing twisting or turning requirements., • Climbing/Balancing Climbing and balancing is required during plant inspections, and other related job requirements. Must be able to climb ladders and work at elevations of 75 feet., • Reaching: Ongoing reaching requirements associated with job requirements., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Maintenance Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$36—$36 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. $3k sign-on bonus Training for role will require travel Relocation package available The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Job Summary The maintenance staff is tasked with the upkeep of buildings and grounds, as well as upkeep of machinery and processing equipment needed to operate and maintain the facility. The Plant Instrument Controls Technician (ICT) will report to the Maintenance Manager and will be maintaining all plant inspection, instrument, electrical, and controls systems and assets. ICTs will be members of the shift Maintenance teams and responsible for completing both planned and unplanned work in accordance with included instructions as well as any applicable rules and regulations. Responsibilities: The Plant ICT (Instrument Controls Technician) will be responsible for the following: • Perform routine and specialized duties in the repair and maintenance and updating of instruments, controls and process control network systems involved throughout the entire manufacturing process., • Work as part of a team to plan, analyze and control the quality of processes., • Inspect, repair, and adjust Programmable Logic Controls (PLC), and Human Machine Interfaces (HMI), and related equipment using electrical test equipment, circuit diagrams, schematics, and blueprints., • Install or Replace Instrumentation Device, such as, Flow Sensors, Temperature Sensors, Pressure sensor and many others. This may include programming the device or downloading Parameters to the device., • Install or Replace Control Systems that fail to operate. They must continuously monitor all operation processes so that a malfunction is immediately recognized and corrected., • Install or Replace PLCs, HMIs, VFDs, Servo Drives. This may include programming the device or downloading Parameters to the device., • Continually improve process control systems through Advanced Process Control, Alarm Management, and Operator Interface Optimization., • Plant liaison for new system start up and commissioning by all outside controls contractors and system integrators to ensure proper transfer of documented PLC program changes and adequate training on the installation/changes that have been completed., • Responsible for integration of PLCs, HMIs, VFDs, Servo Drives, and process controls., • Responsible for the training of end users on the operations of newly installed or modified process control systems., • Provide technical training to lower-level personnel., • The ICT will work in all areas of the facility including the Packaging Department, the Processing Department, and the Facilities/Utilities Department., • Other duties may be assigned Skills/Qualifications required: • Minimum of three (3) years maintenance experience in Industrial Control System development and troubleshooting., • Must have proven experience with the following PLCs: Allen Bradley Micrologix or Micro800, CompactLogix & ControlLogix and Siemens Step 7 PLCs., • Must have proven experience with the following HMI or SCADA programming and configuration., • Experience with Allen Bradley and Siemens VFDs and Servo Drives., • Must have proven experience with EtherNet/IP, ProfiNet, ProfiBus, and ASi Industrial Networks., • Strong PLC skills with expertise in system administrative and maintenance activities, and hardware and software troubleshooting., • Associate degree in electrical/Electronic Engineering or Technology or related military service training programs. Additional professional training., • Proven experience with FTView ME, FTView SE, • Experience with Siemens S7 PLCs, • Experience with Eaton and Danfoss VFDs, • Proven experience with the following industrial networks: Ethernet IP, ProfiNet, ProfiBus, CAN, BACnet, AS-i, Modbus., • Familiarity with SQL databases., • Additional experience with machinery repair and control systems., • Additional training as an industrial electrician., • Dairy and/or high-speed beverage maintenance experience, • Experience programming in visual basic or similar languages Working conditions and Physical requirements: • Regular use of a variety of machines and hand-tools is essential. Standing for extended periods is common. Hearing and vision within normal range is important for conversations, to receive ordinary information and to prepare or inspect documents, manuals and drawings, • Good math and reasoning ability is essential. Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business, • Sitting/Standing/Walking: Stands, walks and sits during completion of job responsibilities., • Lifting/Carrying: Occasional lifting requirements as job demands. Must be able to lift a minimum of 40 lbs. on an occasional basis., • Pushing/Pulling: Occasional pushing or pulling requirements, • Bending/Stooping: Occasional bending and stooping requirements, • Squatting/Kneeling/Crawling: Occasional kneeling or crawling requirements, • Twisting/Turning: Ongoing twisting or turning requirements., • Climbing/Balancing: Climbing and balancing is required during plant inspections, and other related job requirements., • Reaching: Ongoing reaching requirements associated with job requirements., • Grasping/Manipulating: Grasping and manipulating of papers, objects, and equipment will be required. Ability to keyboard for data input will be required on an ongoing basis. Food Safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Maintenance Supervisor travel requirements: 50% initial for training,10% steady state exempt/nonexempt: Non-Exempt base salary range: $45-$47/hr, $2/hr premium on overnights *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Opportunity for advancement Interact With Children • Use appropriate language, interactions, and positive discipline, • Treat every child with respect, • Model appropriate behavior, • Assist in instructing and supervising children in classroom activities, • Implement age-appropriate activities that support our curriculum and the NAEYC standards, • Assess children on a regular basis using written, verbal and visual observation and the COR advantage as a tool to guide assessments, • Take pictures and maintain anecdotal notes, written observations, and other approved forms of documentation for each child and enter into the Kaymbu system., • Research, plan and develop age-appropriate activities for lesson plans in conjunction with the collaborating teacher., • Incorporate required activities into lesson plans that support childrens development, • Prepare activities and materials that support lesson plans., • Submit weekly lesson plans to the Education Coordinator, which includes assessment and purposefully planned activities that are in conjunction with the assessments. (What did you observe? What are kids doing? What do kids need to work on? How are your lesson plans going to meet those needs and use their strengths?) How are you going to differentiate instruction to ensure individual growth?, • Maintain open communication with parents by scheduling and conducting parent/teacher conferences and home visits, • Must conduct at least two conferences a year (Fall and Spring), • As a parent advocate, help resolve issues or concerns that are raised., • Inform parents about daily classroom routines, expectations, policies, field trips and volunteer opportunities., • Communicate with parents about incidents that have been observed and/or recorded on site., • Obtain all required classroom parental signatures as needed, • Collaborate with the Co-teacher to design and complete documentation panels for the classroom and hallways with the (Bulletin Boards), • Complete all necessary paperwork for classroom activities, including attendance, screenings, progress reports, and parent teacher conferences by the deadlines provided by the office., • Maintain accurate and up to date portfolios, • Maintain classroom supply lists and inventory, • Document each childs arrival and departure time on the OCFS attendance sheet, • Conduct a daily health check on each child upon arrival, • Conduct name-to-face checks before leaving an area with your students and upon arriving at the new area with your students., • Fill out incident reports as required, • Support volunteers with the learning of classroom requirements, • Work collaboratively with the Director and all other staff in the building, • Actively participate in meetings which may include management, the teaching team, and/or parents, • Participate in team meetings. Communicate and share ideas and concerns with the classroom team or management., • Participate in at least 30 hours of professional development every two years, with the first 15 hours being completed by the first 6 months of employment. Classroom Maintenance:, • Help to maintain a clean and organized learning environment, • Sanitize all surfaces, equipment, and classroom toys, • Maintain a quality room arrangement in compliance with curriculum standards, • Routinely check classroom equipment and materials to ensure they are in good repair. This includes playground equipment as well.

Job Description ABOUT US ShiftHop, LLC. is a technology services company for healthcare professionals and healthcare facilities. Our mission is to bring the PRN/gig-work to the healthcare field, allowing for decreased staffing shortages in the healthcare field. We empower healthcare professionals to become independent of their full-time job, by offering credentialing services and a clear path for becoming an independent contractor. With ShiftHop, healthcare professionals can find work 24/7, working whenever, wherever, and however often they’d like. ROLE AND RESPONSIBILITIES: We’re seeking a candidate to facilitate day-to-day operations, ensuring successful outcomes of several projects and initiatives by collaborating with our internal corporate team and our partner facilities. This is a remote position with a residency requirement of Rochester, New York. The ideal candidate can oversee multiple projects simultaneously, and is very flexible, while being a “hands-on” leader. This is a director level position which reports directly to the Chief Executive Officer. As a member of high-level leadership, you can expect to have 5-10 direct reports, who will eventually oversee a team of 50-75 in the Rochester, NY area. As the Director of Operations, you will: • Work to implement staff training and compliance procedures, as required by JCAHO for Staffing Agencies, • Implement scalable processes to support our inevitable growth, • Manage and communicate with healthcare facilities, offering complaint resolution and high-level contract approvals, • Facilitate internal leadership meetings, as well as external “pitch” conferences with potential partner healthcare facilities, • Oversee the financial team, ensuring prompt payments are received by partner facilities, and resolving any Accounts Payable complaints, • Assist in the hiring, training and oversight of Facility Success Managers and ShiftHopper Success Managers, further overseeing the onboarding, continued training and termination of these positions, • 5 years of leadership experience, preferably in a healthcare setting, • Advanced computer skills, including Microsoft Outlook, Excel, and ERP/CRM systems, • Bachelor’s degree or equivalent experience as listed above, plus HS Diploma, • Positive attitude seeking the common goal of providing a revolutionary service to reshape healthcare staffing, • Familiarity with nursing, post-acute and inpatient healthcare, • 100% employer paid medical, dental and vision (MVP Healthcare), • 100% employer paid life insurance, • 100% short and long-term disability, • 401k matching up to 10% annually, plus eligibility for immediate vesting, • Flexible schedule – work whenever able, so long as you meet the 40 hour/week minimum requirement, • Same day pay option 20ONGB3wIm

Job Description Alternatives FCU is seeking a Lending Director to join our lending team. Alternatives is a Community Development Financial Institution (CDFI) credit union serving Tompkins and surrounding counties, and is proud to find solutions for those left behind by the mainstream financial institutions. CDFIs share a common goal of expanding economic opportunity in low-income communities by providing access to fair financial products and services for local residents and businesses. At Alternatives FCU, our mission is to help build and protect wealth for people with diverse identities who have been historically marginalized by the financial industry; especially those with low wealth or who identify as Black, Indigenous, or People of Color (BIPOC). This mission is rooted in a deep commitment to equity and justice. The Lending Director leads the Lending Department in delivering loan products and ensuring service quality while contributing to member satisfaction. The Lending Director is responsible for driving loan growth by overseeing the development and management of sustainable lending programs that meet member needs while contributing to the credit union's profitability and overall financial health. This role oversees the credit union's lending portfolio and all lending activities, ensuring responsible practices, effective risk management, and regulatory compliance. The Lending Director implements lending strategies that promote financial inclusion while maintaining asset quality, balancing the credit union's mission of social impact with its financial performance. The ideal candidate will have several years experience in consumer, commercial and mortgage lending, including; loan origination, underwriting, loan portfolio management, loan servicing and collections. Supervisory experience is required. This position can be based in Ithaca or Rochester and may be considered for hybrid. We believe that lasting impact starts from within. That's why we strive to cultivate a team that reflects the communities we serve; diverse in race, ethnicity, gender identity, sexual orientation, ability, socioeconomic background, and lived experience. We actively seek out candidates who bring a range of perspectives and are committed to challenging systemic inequities in financial systems. We are proud to be an equal opportunity employer and strongly encourage applications from people who are BIPOC, women, LGBTQIA+, people with disabilities, and members of other historically excluded communities. We know that not everyone checks every box, and that's okay. If you're excited about this role and our mission, we encourage you to apply, even if your experience doesn't align perfectly. We are passionate about financial justice and bringing equity to wealth-building systems and we invite you to join us!

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Use experience and skills to troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment., • Troubleshoot, repair, adjust and maintain hydraulic, pneumatic, mechanical, electrical and electronic systems., • Possess an ability to use monitoring and testing equipment to facilitate in the troubleshooting, repairing, adjusting, and maintaining of manufacturing and ancillary equipment., • It is the responsibility of the maintenance individual to further his abilities, skills knowledge to expand his capabilities in troubleshooting, repairing, adjusting and maintaining existing as well as new equipment and technology., • Responsible for working safely, follow LO/TO and electrical safety policies. OR 8 hour 12 days on 2 days off schedule of 11pm - 7am OR 3pm - 11pm Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Two-year certificate from college or technical school with a focus in machining and/or electronics; or two years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Paralegal & Billing Specialist (Small Firm) Details: Monday – Thursday, 37.5 Hours WFH ability after full trained up Our client is a Rochester-based law firm serving individuals and small businesses in estate planning & administration/probate, Medicaid & elder law, business formations and counsel, and residential/commercial real estate. The firm is known for practical, client-first service built on decades of experience. The opportunity The current longtime paralegal has transitioned out, and TES Staffing is actively seeking an experienced, roll-up-your-sleeves professional ASAP. This can be one hybrid role (Paralegal & Billing) or two hires – and we’re open to structuring it around the right talent. You’ll work directly with the owner and a small, fast-moving team where your judgment, organization, and follow-through matter every day. Job Description: Core Paralegal (≈80% of the work) • Estate administration & probate: open estates, prepare petitions/waivers, coordinate filings, track deadlines, communicate with executors/beneficiaries, assemble accounting packages., • Estate planning: draft and revise Wills, POAs, HCPs, trusts, asset/beneficiary designation coordination, assemble signing packages and binders., • Business/corporate (light): form LLCs/corporations, prepare basic organizational documents, track biennial filings., • Real estate (about one closing/week): order/title updates, collect payoffs, assemble closing packages, coordinate with lenders/agents, and post-closing follow-through., • Client communication & calendars: manage Outlook calendars, task lists, reminders, and correspondence; keep matters moving and clients informed., • Enter attorney/paralegal time daily; generate prebills and monthly invoices., • Coordinate with our outsourced billing partner during ramp-up; learn and take over QuickBooks time & billing once trained., • Handle basic A/R follow-ups and payment posting in collaboration with the attorney. Tools you’ll use: • Microsoft Outlook (heavy calendaring/email) and Word (document drafting & styles)., • QuickBooks (time & billing; will train if experienced in similar systems)., • Cabinet DMS for scanning/filing (easy to learn; training provided)., • Experience in a small law firm setting supporting estate matters (administration/probate and/or planning)., • Solid working knowledge of legal drafting and court/Surrogate’s procedures; comfortable juggling multiple matters with minimal hand-holding., • Billing literacy: you understand time entries, prebills, invoice reviews, and A/R basics (or can learn quickly)., • Tech-steady: strong in Outlook/Word; organized digital filer; quick to pick up a new DMS or billing workflow., • 37.5-hour workweek with flexible hours (examples: 7:30–4:00, etc.)., • Work-from-home flexibility after training (especially in winter) for heads down drafting/billing., • Free parking., • Starting at $25/hour (approximately $50,000–$55,000/year)., • 401(k) with 5% match., • PTO/vacation is flexible and practical; sick-day approach is common-sense., • No employer medical plan.Company DescriptionTES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job DescriptionDescription: Position Summary The Director of Engineering leads the strategic and operational direction of the engineering department within a dynamic contract manufacturing environment. This role is responsible for driving innovation, ensuring manufacturability, and optimizing engineering processes to meet client specifications, regulatory standards, and production goals. The ideal candidate is a collaborative leader with deep technical expertise and a passion for continuous improvement. Duties and Responsibilities · Develop and execute the engineering roadmap aligned with company growth and client needs. · Drive system based solutions for engineering processes for redundancy and coverage. · Represent the company as technical interface with clients. · Function as continuous improvement lead for the Company. · Define and implement world class standards for work instructions and quality control plans and implement companywide. · Develop, train and guide engineering personnel to achieve company engineering goals. · Ensure timely and cost-effective execution of engineering projects. · Identify and implement KPIs to drive thruput improvement for engineering releases to the shop floor. · Serve as a technical liaison with clients, translating requirements into manufacturable solutions. · Partner with operations, quality, and supply chain teams to ensure seamless production. · Support business development with technical input during client onboarding and quoting. · Serve as resident expert and set standard expectations for all manufacturing engineers to achieve identified outcomes. · Ensure engineering practices comply with ISO, FDA, and other relevant standards. · Oversee documentation including process flows, work instructions, and validation protocols. · Evaluate and implement new technologies, automation, and digital tools to enhance capabilities. · Lead and instruct others on continuous improvement initiatives across engineering and production processes. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description Advantech Industries Inc. is a contract manufacturer providing sheet metal and precision CNC machined parts. We are looking to immediately fill a CNC Set-Up Operator position on our A shift. Hours are Monday – Friday, 7:30am – 4:00pm. Eligible candidates must have a High School Diploma/GED and 5 years experience. DUTIES & RESPONSIBILITIES · Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper. · Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring. · Inspects "first part", and inspects work pieces throughout the production run for out-of-tolerance machining. · Clean machine and work area. · Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS · With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved · Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes · Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating · Ability to understand and carry out oral and written directives · Ability to work well under pressure, to adhere to deadlines and the ability to be flexible · Thorough operational knowledge and skills of specific CNC mills and lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands · Ability to operate assigned equipment safely and efficiently · Ability to keep record of time spent and material used · Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers · Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Are you looking for a position with unlimited earning potential? Interested in bettering your CNC machining skillset while working on state-of-the-art equipment? Like to keep busy and work with manufacturing minded individuals? Build your CNC Machining career with Advantech Industries. Advantech Industries is a contract manufacturer providing precision CNC machined parts built to customer provided prints. We are looking to immediately fill multiple CNC Machinist positions on our A Shift. Hours are Monday – Friday, 7:30am – 4:00pm. Eligible candidates must have a High School Diploma/GED and 5 years experience in the CNC Machining trade. DUTIES & RESPONSIBILITIES · Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper. Experience working with Mazak and Haas CNC machines is preferred. · Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring. · Inspects "first part", and inspects work pieces throughout the production run for out-of-tolerance machining. · Clean machine and work area. · Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS · With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved · Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes · Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating · Ability to understand and carry out oral and written directives · Ability to work well under pressure, to adhere to deadlines and the ability to be flexible · Thorough operational knowledge and skills of specific CNC mills and lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands · Ability to operate assigned equipment safely and efficiently · Ability to keep record of time spent and material used · Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers · Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionSalary: $18-$22/ Per Hour We're looking for talented Interns to join our team for the Fall 2025 Semester! As an Engineering Intern, you will be working with our global R&D team on our Timing and Synchronization Products. We're looking for Interns enrolled in a four-year or post-graduate degree program in the following or related fields: Electrical Engineering Computer Engineering Computer Science Mechanical Engineering Signal Processing Radio Communications What youll be doing: • Working closely with our Engineering Team, you will be designing, developing, and enhancing product features on the latest GPS-based and alternative PNT time synchronization equipment and software., • Coding software in our embedded Linux stack using languages such as C, PHP, python, HDL, golang (per your experience), • Testing new products, new features and software releases to ensure our products meet the highest standards and specifications., • Devising test procedures, experiments, test fixtures and software; performing those tests, analyzing the results and generating comprehensive test reports and recommendations., • Analyzing and debugging problem reports and designing fixes, • Working in a global multi-discipline, multi-cultural environment with cross-functional teams toward a common design goal. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Location: Rochester, NY (hybrid) NEXT's mission is to help entrepreneurs thrive. We're doing that by building the only technology-led, full-stack provider of small business insurance in the industry, taking on the entire value chain and transforming the customer experience. Simply put, wherever you find small businesses, you'll find NEXT. Since 2016, we've helped hundreds of thousands of small business customers across the United States get fast, customized and affordable coverage. We're backed by industry leaders in insurance and tech, and we still have room to grow — that's where you come in. We are looking for an innovative, bright, motivated, and hard-working individual to join our team to help us accomplish our mission of combining insurance know-how, innovative technology, and world-class service to delight our customers. In this role, you will be selling primarily Workers Compensation policies to strategic partnerships partners while also upselling other P&C lines of coverage. This is a high volume, fast paced environment where organization and adherence to process are a must. If you're looking for a sales position that provides you with an abundance of warm leads and endless opportunities, this is the position for you! What You'll Do: • Move fast to contact prospective clients within target time frames and develop relationships with customers to deliver a truly outstanding sales experience, • Work closely with prospective customers to educate them on the benefits of our programs and products while ensuring all accounts are underwritten thoroughly and within carrier guidelines, • Work closely with referral sources and carrier contacts to successfully deliver for your customer, • Crush your monthly production goals for units and/or revenue, • Strive to follow processes related to customer follow up and data gathering, • Maintain the existing sales culture predicated on motivation and positive reinforcement while upholding a standard of accountability to self, team and company, • Complete other duties as assigned What We Need: • 2-3+ years of Commercial Insurance experience, • Prior experience in insurance sales required, • A demonstrated passion for delivering incredible customer experience, • Coverage level knowledge of most commercial P&C products, including (but not limited to): EPLI, BOP, Commercial Package, E&O, Cyber/Data Breach, Commercial Auto, Umbrella, Surety Bonds, Workers' Compensation, • Someone with an active New York State Property & Casualty license and the ability to obtain and maintain all state insurance licenses, including the CE credits needed to renew/maintain their license, • Proven ability to thrive in a team atmosphere, • Working knowledge of carrier quoting systems and mastery of common computer programs, • Thrives in a fast-paced, high-energy environment, with an entrepreneurial ownership mentality, • A humble spirit and unquestionable commitment to ethics, • Great organizational and interpersonal skills, • An excellent communicator who can work well with various groups and levels of the organization, • BA/BS required, • Genuine empathy for small business owners and employees and a deep desire to improve their lives Note on Fraudulent Recruiting We have become aware that there may be fraudulent recruiting attempts being made by people posing as representatives of Next Insurance. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers.Please note, we do not ask for sensitive information via chat, text, or social media, and any email communications will come from the domain @nextinsurance.com. Additionally, Next Insurance will never ask for payment, fees, or purchases to be made by a job applicant. All applicants are encouraged to apply directly to our open jobs via the careers page on our website. Interviews are generally conducted via Zoom video conference unless the candidate requests other accommodations.If you believe that you have been the target of an interview/offer scam by someone posing as a representative of Next Insurance, please do not provide any personal or financial information. You can find additional information about this type of scam and report any fraudulent employment offers via the Federal Trade Commission's website (), or you can contact your local law enforcement agency. The range displayed on this job posting reflects the minimum and maximum target for new hire salaries for the position in the location(s) listed. Within the range, individual pay is determined by additional factors, including, without limitation, job-related skills, experience, and relevant education or training. NEXT employees are eligible for our benefits package, consisting of our partially subsidized medical plan, fully subsidized vision/dental options, life insurance, disability insurance, 401(k), flexible paid time off, parental leave and more. US annual base salary range for this full-time position: $50,000—$60,000 USD Don't meet every single requirement? Studies have shown that some underrepresented people are less likely to apply to jobs unless they meet every single qualification. At NEXT, we are dedicated to building a diverse, inclusive and respectful workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. One of our core values is 'Play as a Team'; this means making sure everyone has an equal chance to participate and make a difference. We win by playing together. Next Insurance is an equal opportunity employer and prioritizes building a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants of any type and do not discriminate based on race, color, religion, national origin, gender, age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Next's policy is to comply with all applicable laws related to nondiscrimination and equal opportunity and will not tolerate discrimination or harassment based on any of these characteristics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionDescription: The most prestigious lending institutions entrust Zwicker & Associates, P.C. to protect their legal interests throughout the country. Zwicker & Associates P.C. is a national creditor rights law firm whose focus on ethics, compliance, and assertive representation of our clients’ interests makes us the industry leader in debt collection. Founded in 1991, Zwicker represents creditors in various consumer and commercial recovery and litigation efforts. Zwicker is headquartered in Andover, Massachusetts, and maintains office locations throughout the United States. Zwicker is hiring an Associate Attorney to join our team in Rochester, New York. The ideal candidate will be eager to learn and have exemplary organizational, written, and verbal communication skills. We look for candidates whose diverse talents, backgrounds, and experiences enable the Zwicker team to innovate and excel in performance collaboratively. We encourage and provide lifelong learning and training opportunities for our team members to build a strong foundation and a successful future with us. We strive to promote from within, offering excellent career advancement opportunities for high achievers. The base salary range for this position is $80,000-$100,000 per year Responsibilities of Associate Attorneys include • Communicate effectively and appropriately with team members and outside parties, • Draft, review, and file legal pleadings, motions, discovery, etc., in furtherance of active litigation files, • Review litigation case files and pleadings to determine appropriate action, • Advocate on behalf of the client’s interests at various litigation settings, • Utilize internal proprietary software to properly update and document the status of each account in the assigned inventory, • Analyze and process litigation inventory reports and litigation files, as assigned by the Managing Attorney, to ensure that proper litigation workflow is being performed according to the Firm and client expectations, • Comply with all client and firm standard operating procedures, • Ability to travel to various courtrooms within the branch office footprint as required, • Perform other duties as assignedRequirements:, • Admission to practice law in the state of New York, • Strong organizational and time management skills, • Proficient computer skills in Microsoft Office suite, including Word, Excel, and Outlook, • Excellent verbal and written communication skills, • Highly motivated self-starter, • Eagerness to learn, • Minimum of one year of litigation/trial experience, • Working knowledge of civil procedure, • Debt collection experience, • Be able to lift five pounds or more, • Be able to sit 90% of the work day at times, • Be able to bend at the waist and be mobile when needed, • Be able to read and comprehend position-specific documents and correspondence, • Be able to communicate in a common language with (or to) individuals or groups verbally and/or in writing, • Be able to operate a computer, phone, or equivalent device, • Be able to complete a minimum of a 40-hour flexible workweek schedule This is a full-time, full-benefit position. The benefits package includes medical, vision, and dental insurance, long-term disability insurance, life insurance, compensated time off, paid holidays, and 401K with match. No phone calls, no agencies, EOE, drug-free workplace. Please review our Applicant Privacy Notice: Each posted position will be active for at least five (5) business days, during which time all qualified and eligible employees can apply. #ZR

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Senior Quality Engineer who will lead and facilitate the implementation of quality initiatives and their continual improvement. Responsibilities include lead, coach, and facilitate problem solving, analysis of data and continual improvement activities. Review and understand customer prints and specifications. Ensure the quality of the parts produced meets all expectations. Quickly and effectively take action when external or internal non-conformances are found. Key Responsibilities: • Follows all safety processes and procedures in accordance with the job and Company policy., • Be the Quality liaison between the customer and site manufacturing process for understanding quality requirements and working through quality issues., • Facilitate and promote use of appropriate problem-solving techniques (8D, 5-Why) for effective root cause analysis and successful corrective action. Interfaces with engineering and manufacturing to ascertain and implement corrective actions., • Provide technical support to operations ensuring consistent adherence to quality requirements., • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness., • Participate in the Advanced Product Quality Planning activities (NORP) to determine appropriate use of existing and new measurement systems during new tool or process design and startup., • Participate in the PT lot process to ensure that all quality checks as outlined in the MPCD (operation work instructions) are in place and will ensure that customer requirements will be achieved., • Coordinate, develop, and submit PPAP documents (including Control Plan, FMEA, Process Flow Diagram) for new product launches to meet customer requirements., • Generate efforts to achieve and surpass the companys quality key metrics through the execution of QMS processes and by proposing new or modified approaches., • Understand and promote overall compliance with ISO 9001 specifications., • Manage priorities for inspection workload and support inspectors with the means to complete inspection tasks., • Interpret and explain GD&T callouts on customer prints for inspectors to follow., • Maintain performance evaluations of associates with evidence of their embodiment of the companys core values and data on their achievement towards S.M.A.R.T. goals., • Demonstrate a productive work ethic and commitment to quality that sets the standard for the Quality Engineer role., • Assist with other duties as assigned by Manager. Supervisory Responsibilities:, • Bachelors degree (B.A.) in engineering or technical field or equivalent combination of education and experience., • 7+ years related experience or training 2+ years experience with supervising., • To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Microsoft PowerPoint.Other Requirements:, • Knowledge and experience in metal fabrication, stamping and forming. Ability to use standard manufacturing measurement tools and equipment. SPC, GD&T, DOE, Gage R&R, statistical analysis. Basic understanding of mechanical processes, materials and machinery. Strong problem solving skills. Ability to travel (15%) to customers and suppliers. ASQ certification a plus. PC-DMIS experience a plus., • Language Skills: Very High Skills: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors., • Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory and lift and/or move up to 50 pounds. Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: Description Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit SUMMARY: The Maintenance Mechanic performs routine and extensive preventative maintenance and repair procedures on building, mechanical equipment, and utility systems. SUPERVISORY RESPONSIBILITIES: • Performs minor and major repair of building and equipment. (Major repairs are performed under the supervision of licensed maintenance workers.), • Performs preventive maintenance procedures on building mechanical equipment on a scheduled basis; inspects belts, checks fluid levels, replaces filters, greases bearings, seals, etc. repairs or replaces broken parts., • Calibrates and repairs pneumatic systems., • Completes daily, weekly and monthly checklists on building equipment maintenance procedures and maintains records of scheduled maintenance procedures. Completes daily, weekly, and monthly checklists on building equipment maintenance procedures and maintains records of scheduled maintenance procedures., • Operates a computer which controls and monitors mechanical equipment and utility systems., • Installs electrical wiring and equipment; new electrical services, wiring during remodeling projects; replaces and repairs wiring as needed., • Repairs electrical equipment and control circuits; replaces faulty electrical switches; repairs refrigeration equipment., • May repair electrical locks and control panels to maintain building security., • May install computer cable., • Responds to emergency maintenance requests as required., • Assists with the renovation/remodeling of buildings; repairs plaster and drywall; paints building structures., • Maintains records of scheduled maintenance procedures., • Performs outside custodial duties such as snow removal as required., • Obtains estimates for supplies, repair parts; orders parts as needed., • Other duties may be assigned. Requirements: REQUIRED SKILLS/ABILITIES: · Ability to read and comprehend simple instructions, short correspondence, and memos. · Has good skill in the use of hand and power tools. · Ability to write simple correspondence. · Ability to effectively present information in one-on-one and small group situations to other employees of the organization. · Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. · Ability to compute rate, ratio, and percent and to interpret miscellaneous drawings and schematics. · Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. · Ability to deal with problems involving a few concrete variables in standardized situations. · Valid NYS Driver's License. EDUCATION & EXPERIENCE · High school diploma or general education degree (GED) and one year of responsible experience in building and mechanical equipment maintenance and repair; or an acceptable equivalent combination of education and experience. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee is occasionally required to sit. The employee must frequently lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is usually moderate to occasionally loud.

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit Essential Duties and Responsibilities include the following. Other duties may be assigned. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); and 5+ years related experience and/or training; or equivalent combination of education and experience. Communication Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees. Math Ability: Ability to add and subtract four-digit numbers and to multiply and divide. Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry. Reasoning Ability: Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning. Computer/Technical Skills: • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Lock out/Tag out Training, • Right to Know Training, • Fire Extinguisher Training, • Personal Protective Equipment Training The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly exposed to moving mechanical parts, fumes or airborne particles and vibration. The employee is occasionally exposed to high, precarious places. The noise level in the environment is moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee is regularly required to lift up to 25 pounds. The employee is occasionally required to lift between 50 - 100 pounds. The vision requirements include: close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Job DescriptionDescription: Summary: Under the supervision of the Maintenance Supervisor, the Maintenance Specialist is responsible for the maintenance of all properties occupied by Ibero American Action League, this includes supporting and acting as a backup to the janitorial staff at 777 Clifford Ave., 124 Evergreen Street, 214,216, and 218 Clifford Ave. Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Complete emergency and non-emergency repairs as assigned by Supervisor., • Clean and maintain buildings common areas, bathrooms, offices, grounds., • Act as a team leader to the janitorial staff at several designated locations as determined by the supervisor., • Complete special projects on schedule., • Respond to special requests for pick-up and delivery of supplies and equipment., • Purchase materials needed to complete work., • Monitor performance of regularly scheduled maintenance activities such as repairs and maintenance of heating systems, rug cleaning, snow plowing, landscaping, mowing, pest extermination, etc., • Maintain positive relationships and open lines of communication with Ibero personnel located at each site., • Maintain inventory of janitorial supplies, maintenance tools and equipment., • Maintain agency owned equipment in good working order., • May be required to be on call during non-working hours to receive emergency calls related to break-ins, fire alarms or emergency repairs., • Must have reliable transportation., • Any other duties assigned by supervisor. Authority: This position holds a relatively high degree of independence within the framework of the agency's policies and procedures. The individual must be resourceful and able to display initiative and understanding of safety systems. Must keep immediate supervisor abreast of issues and concerns which merit intervention from higher level management staff. Position Qualifications: Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Accuracy - Ability to perform work accurately and thoroughly., • Customer Oriented - Ability to take care of the customers' needs while following company procedures., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Diversity Oriented - Ability to work effectively with people regardless of their age, gender, race, ethnicity, religion, or job type., • Ethical - Ability to demonstrate professionalism conforming to a set of values and accepted standards., • Reliability - The trait of being dependable and trustworthy., • Communication, Oral - Ability to communicate effectively with others using the spoken word., • Communication, Written - Ability to communicate in writing clearly and concisely. Physical Demands: The position does require occasional standing, squatting, lifting of up to approximately 50 lbs. and frequent standing. lbero-American Action League is committed to the policy of equal employment opportunity. This policy expressly prohibits discrimination on the basis of sex, race, color, religion, creed, national origin, age, marital status, sexual orientation, disability, gender identity or expression, genetic predisposition or carrier status, domestic violence victim status, veteran status or status as a member of any other protected group or activity. Requirements: • Experience in cleaning buildings., • Ability to work independently., • Physically able to carry and lift heavy equipment., • Must possess a valid NYS driver's license and meet Ibero Vehicle Operator requirements., • Bilingual Spanish and English preferred but not required., • High school diploma or equivalent., • Minimum of 2 years' experience in building maintenance., • Able to perform repairs and building renovations as requested., • A combination of training and experience other than the specified, if judged to be adequate for the job, may be accepted by the President and CEO.

Job Description Advantech Industries Inc. is a contract manufacturer providing sheet metal and precision CNC machined parts. We are looking to fill a CNC Programmer position. Hours are Monday –Friday, 7:30am-4:00pm. Eligible candidates must have a High School Diploma/GED and 5 years of experience minimum. Associates Degree in Industrial Technologies preferred. Experience with Mazatrol and Fanuc a plus. DUTIES & RESPONSIBILITIES · Use CAD skills to create work holding and fixturing layouts, program CNC machine tools using Solid Works, Mastercam Programming software, and create geometry as needed. · Generate programs for milling centers, turning centers and muti-tasking CNC equipment. · Update and manage CNC programs and manufacturing processes to consistently produce a precision product. · Create manufacturing tool list for CNC programs SKILLS & QUALIFICATIONS · With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved. · Superior communication skills and ability to develop teamwork among staff; interface with department supervisors and machinists on a regular basis. · Must be diplomatic and possess good human interaction skills. · Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes. · Ability to multitask using the appropriate level of priority setting. · Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating. · Ability to work well under pressure, to adhere to deadlines and the ability to be flexible. · Must be proficient with Solid Works and Mastercam software. · Experience with Mazatrol and Fanuc a plus. · Must be proficient in Cutting Speeds and Feeds. · Ability to operate assigned equipment safely and efficiently. · Ability to keep record of time spent and material used. · Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tool. · Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. · Minimum 5 years of experience. High School Diploma/GED required. · Associates Degree in Industrial Technologies preferred. JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $28.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Job Title: Specimen Management Tech Department: Specimen Processing Location: Elmgrove Park | 160 Elmgrove Park Hours Per Week: 40 Schedule: 5pm - 1:30am OR 6pm -2:30am Laboratory and pathology services are vital to the diagnosis, treatment and prevention of disease. With convenient patient laboratory service centers, home lab services, expert pathologists and in-hospital diagnostics, we offer the full range of testing services to the communities we serve. SUMMARY: As a Specimen Management Tech, your excellent attention to detail and communications skills are crucial to prompt and accurate specimen analysis and patient care. RESPONSIBILITIES: • Laboratory Work - Prepare laboratory samples for testing; operate imaging system as appropriate; communicate with departments and physicians regarding laboratory testing, results and sample requirements; prepare specimens and paperwork accurately for transfer and testing done in other departments., • Data Entry - Enter and label laboratory samples in an accurate and timely manner; retrieve requisitions as requested; maintain a manual filing system for outpatient/inpatient requisitions., • Computer knowledge - Maintain knowledge and competency in necessary computer systems and have a working knowledge of common operating systems in many areas of the department. PREFERRED QUALIFICATIONS: • Data entry and computer skills preferred., • Medical terminology and understanding of billing issues preferred. EDUCATION: LICENSES / CERTIFICATIONS: PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $19.40 CITY: Rochester POSTAL CODE: 14624 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job Description CNC LATHE SET-UP OPERATOR – A SHIFT Advantech Industries Inc. is a contract manufacturer providing sheet metal and precision CNC machined parts and assemblies. We are looking to immediately fill a Lathe Set-Up Operator position for our A shift. Hours are Monday – Friday, 7:30am – 4:00pm. Eligible candidates must have a High School Diploma/GED and 5 years experience. DUTIES & RESPONSIBILITIES -Sets up machine and observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and caliper. -Sets up and controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling, chamfering, and deburring. -Inspects "first part", and inspects work pieces throughout the production run for out-of-tolerance machining. -Experience on Mazak machines preferred. -Clean machine and work area. -Provide aid and guidance to machine operators with less experience or skill. SKILLS & QUALIFICATIONS -With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved -Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes -Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating -Ability to understand and carry out oral and written directives -Ability to work well under pressure, to adhere to deadlines and the ability to be flexible -Thorough operational knowledge and skills of specific CNC mills and lathes to be operated with the ability to calculate and set machine controls either manually or by entering commands -Ability to operate assigned equipment safely and efficiently -Ability to keep record of time spent and material used -Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers -Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Power-Flo Technologies is seeking a Panel Shop Technician to join the Rochester team. Panel Shop Technician Primary Functions • Build and wire custom industrial control panels as well as OEM products as assigned by the Panel Shop Supervisor, within schedule provided in both time and date., • Maintain a neat and orderly work area at all times. Panel Shop Technician Essential Responsibilities • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc., • Assist Apprentices and other Technicians in techniques and procedures Panel Shop Technician Necessary Qualifications • Basic Knowledge of Electrical Theory, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Ability to read and interpret electrical schematics and mechanical drawings, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Valid and Clean Driver's License Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Full-time, on-site. Candidates need a clean and valid driver's license to operate company vehicles. $18 - $22/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description MAINTENANCE MECHANIC Under the direct supervision of the Maintenance Supervisor, the Maintenance Mechanic is responsible for mechanical, hydraulic and electrical repairs along with general maintenance of equipment. Advantech Industries is currently recruiting for a Maintenance Mechanic. Hours are Monday – Friday 7:30am – 4:00pm. Eligible candidates must have a minimum of 5 years experience and a High School Diploma or GED. DUTIES & RESPONSIBILITIES: • Preventative Maintenance (Both CNC Machines & Press Brakes) Includes cleaning of coolant tanks, cleaning and changing equipment filters and replenishing or changing oils., • General Mechanical Repairs, • General Hydraulic Repairs, • General Electrical Repairs, • Facility Maintenance SKILLS & QUALIFICATIONS: • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that facilities and equipment are properly maintained., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Finesse in performance of maintenance related duties. JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionTeachers for Imagination Childcare Academy, Inc. plan and implement learning experiences that advances the intellectual, emotional, social and physical development of children within a safe, healthy learning environment. They encourage the involvement of the families of the children of the program and support the development of relationships between children and their families. Interact With Children • Use appropriate language, interactions, and positive discipline, • Treat every child with respect, • Model appropriate behavior, • Assist in instructing and supervising children in classroom activities, • Implement age-appropriate activities that support our curriculum and the NAEYC standards, • Continuously monitor children to ensure safety at all times, and report child abuse and neglect when necessary. Assess Children, • Assess children on a regular basis using written, verbal and visual observation and the COR advantage as a tool to guide assessments, • Take pictures and maintain anecdotal notes, written observations, and other approved forms of documentation for each child and enter into the Kaymbu system., • Formally assess EVERY student 3 times a year, using Imagination Childcare Academy assessment tools Curriculum Preparation:, • Research, plan and develop age-appropriate activities for lesson plans in conjunction with the collaborating teacher., • Incorporate required activities into lesson plans that support children’s development, • Prepare activities and materials that support lesson plans., • Submit weekly lesson plans to the Education Coordinator, which includes assessment and purposefully planned activities that are in conjunction with the assessments. (What did you observe? What are kids doing? What do kids need to work on? How are your lesson plans going to meet those needs and use their strengths?) How are you going to differentiate instruction to ensure individual growth?, • Lessons include objectives and are tied to the Common Core Standards Communicate with Parents:, • Maintain open communication with parents by scheduling and conducting parent/teacher conferences and home visits, • Must conduct at least two conferences a year (Fall and Spring), • As a parent advocate, help resolve issues or concerns that are raised., • Inform parents about daily classroom routines, expectations, policies, field trips and volunteer opportunities., • Communicate with parents about incidents that have been observed and/or recorded on site., • Obtain all required classroom parental signatures as needed, • Maintain every child’s BEE folder with up to date and accurate information Documentation:, • Collaborate with the Co-teacher to design and complete documentation panels for the classroom and hallways with the (Bulletin Boards), • Complete all necessary paperwork for classroom activities, including attendance, screenings, progress reports, and parent teacher conferences by the deadlines provided by the office., • Maintain accurate and up to date portfolios, • Maintain classroom supply lists and inventory, • Document each child’s arrival and departure time on the OCFS attendance sheet, • Conduct a daily health check on each child upon arrival, • Conduct name-to-face checks before leaving an area with your students and upon arriving at the new area with your students., • Fill out incident reports as required, • Document application of any topical ointments Supervision:, • Support volunteers with the learning of classroom requirements, • Delegate duties as necessary to the Teacher’s Assistant and give constant feedback to facilitate professional growth. Administration:, • Work collaboratively with the Director and all other staff in the building, • Actively participate in meetings which may include management, the teaching team, and/or parents, • Participate in team meetings. Communicate and share ideas and concerns with the classroom team or management., • Participate in at least 30 hours of professional development every two years, with the first 15 hours being completed by the first 6 months of employment. Classroom Maintenance:, • Help to maintain a clean and organized learning environment, • Sanitize all surfaces, equipment, and classroom toys, • Maintain a quality room arrangement in compliance with curriculum standards, • Routinely check classroom equipment and materials to ensure they are in good repair. This includes playground equipment as well.

Job DescriptionUniversity Preparatory Charter School for Young Men is currently seeking candidates for a Special Education Teacher position for the 2025-2026 school year. COMPANY DESCRIPTION: The mission of the University Preparatory Charter School for Young Men is to establish a culture that celebrates diversity and where all boys thrive academically and holistically. University Prep develops this culture through small classes, student empowerment, personalized attention from teachers and school staff, and a consistent focus on successful instructional outcomes. University Prep provides opportunities and experiences that balance the academic, social, physical, and creative development of young men. Consistent emphasis is placed on preparation for life after high school, a 100% graduation rate, and all students being college or workplace ready. Job Description:We are seeking a dedicated and proactive School Maintenance Worker to join our team. This position requires a reliable individual to assist with repairs, maintenance, and upkeep of school facilities and grounds. The successful candidate will play a key role in ensuring a safe, clean, and well-maintained environment for students, staff, and visitors.Key Responsibilities: • Building Repairs: Perform minor and major repairs on school buildings, including plumbing, electrical, and carpentry work, ensuring all issues are resolved promptly., • Facility Maintenance: Conduct routine checks of heating, ventilation, and air conditioning (HVAC) systems, lighting, plumbing, and other essential infrastructure, ensuring everything operates efficiently., • Groundskeeping: Maintain school grounds, including mowing, landscaping, trimming, snow removal, and litter control to ensure a clean and safe environment year-round., • Cleaning: Assist with general cleaning duties within the school, including cleaning common areas, restrooms, classrooms, hallways, and cafeterias when necessary., • Safety Compliance: Monitor and maintain school facilities for safety hazards, ensuring compliance with all local, state, and federal regulations., • Inventory Management: Maintain supplies and tools needed for repairs and cleaning, notifying supervisors when new inventory is required., • Team Collaboration: Work closely with school staff and management to prioritize and complete maintenance requests in a timely manner., • Event Support: Provide support during school events and activities by setting up or taking down equipment, ensuring the building and grounds are in optimal condition., • Additional duties as assignedQualifications:, • High school diploma or equivalent required., • Previous experience in facility maintenance, repairs, or groundskeeping preferred., • Basic knowledge of plumbing, electrical, carpentry, and HVAC systems., • Ability to use hand tools, power tools, and cleaning equipment safely and effectively., • Strong problem-solving skills with a focus on attention to detail., • Ability to work independently and manage time effectively., • Willingness to perform cleaning tasks and assist with various maintenance duties., • Ability to lift and move heavy objects as needed (up to 50 lbs)., • Strong communication skills and a friendly, helpful attitude towards staff and students., • Flexibility to work outside regular hours as needed for emergency repairs or special events.Working Conditions:, • Work will be performed both indoors and outdoors., • Must be able to work in all weather conditions., • Some lifting and physical labor required., • Occasional after-hours work may be needed for emergencies.BENEFITS:, • 403(b), • Dental insurance, • Health insurance, • Life Insurance, • Paid time off, • Tuition reimbursement SALARY/SALARY RANGE: The current salary range is $16 hr - $23 hr; negotiable based on level of education, experience, and work history. Powered by JazzHR 31WyKdQ7BP

Job DescriptionSalary: $18-$22 We're looking for talented Interns to join our team for the Spring/Summer 2025 Semester! As an Engineering Intern, you will be working with our global R&D team on our Timing and Synchronization Products. We're looking for Interns enrolled in a four-year or post-graduate degree program in the following or related fields: Electrical Engineering Computer Engineering Software Engineering Computer Science Mechanical Engineering Signal Processing Radio Communications What youll be doing: • Working closely with our Engineering Team, you will be designing, developing, and enhancing product features on the latest GPS-based and alternative PNT time synchronization equipment and software., • Coding software (embedded Linux, APIs, microservices, UX/UI, backend services, database integrations) in our embedded Linux stack using languages such as C, PHP, python, HDL, golang, JavaScript, React (per your experience), • Testing new products, new features and software releases to ensure our products meet the highest standards and specifications., • Prototyping and validating new technologies, • Devising test procedures, experiments, test fixtures and software; performing those tests, analyzing the results and generating comprehensive test reports and recommendations., • Analyzing and debugging problem reports and designing fixes, • Working in a global multi-discipline, multi-cultural environment with cross-functional teams toward a common design goal., • Specific project and tasking may vary. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description ABOUT US: Ethos Risk Services is a leading insurance claims investigation and medical management company, specializing in surveillance and fraud detection. At the forefront of, we provide accurate data and actionable insights that translate into better decision-making for our clients. To learn more, visit: JOB SUMMARY: Have you ever thought about becoming a Private Investigator? Are you ready to kick-start your career in a rapidly growing industry? Want to get paid to learn how to investigate fraud and conduct covert surveillance in the real world? Our Full-Time Entry-Level Field Investigator position will help launch your career by providing you with an industry leading FULLY PAID Investigator Training Program - no prior experience necessary! KEY RESPONSIBILITIES: • Case Preparation: Conduct preliminary investigations using social media and analyzing database research., • Field Surveillance: Perform covert surveillance from your vehicle by tracking and capturing high-quality video evidence of surveillance targets., • Report Writing: Draft detailed and court-ready investigative reports summarizing activity and key findings., • Documentation: Finalize case files by submitting case reports and uploading video footage via personal laptop at the end of the day., • Communication: Work closely with field supervisor, receiving regular guidance and mentorship. QUALIFICATIONS: • Driver's License: Active driver's license that is not currently suspended or revoked., • Personal Vehicle: A well-maintained vehicle that is always reliable (preferably with tinted windows). Proof of auto insurance coverage is required., • Travel Expectations: While we aim to keep assignments within a reasonable drive of your residence, occasional further travel and overnight stays (covered by the company) may be required., • Technology: A reliable laptop, cell phone, and internet service are needed for communication and administrative tasks., • Required Skills: Strong computer & internet proficiency. Excellent communication, verbal & writing skills. WHAT WE OFFER: • Paid Investigator Training Program: Fully paid training program led by industry experts with ongoing development and support. Initial training will be held via virtual classroom then transition into on-the-job training., • Paid Licensing: We pay for all your licensing fees! Our licensing team will guide you through the process of acquiring all investigator licensing to ensure a smooth process., • Surveillance Equipment: We will provide you with necessary surveillance equipment. After a year of employment, it is yours to keep!, • Pay Increases & Milage Reimbursement: There are several performance milestones within your training & first year of employment that will reward you with pay increases. Additionally, we offer a mileage reimbursement program., • Health Insurance/Retirement: Medical, Dental Vision, Life/Disability Insurance + 401k WORKING CONDITIONS: • Most surveillance cases start at 6:00AM. End time can vary depending on activity and a typical workday can vary from 3-12 hours., • Weekends/holidays are common workdays as claimants are more likely to be active., • This is an independent role often requiring long hours alone in your vehicle, regardless of weather conditions., • Must remain alert with no external distractions, ready to use videography equipment to document subjects. Ethos Risk Services is an equal opportunity employer that does not discriminate on the basis of religious creed, sex, national origin, race, veteran status, disability, age, marital status, color or sexual orientation or any other characteristic. A background check will be conducted, in accordance to the local state law and regulations. Job Posted by ApplicantPro

Job Description Production Control Coordinator JOB SUMMARY: The Production Control Coordinator develops and implements project scheduling and strategy throughout the manufacturing process to successfully maintain production flow in support of customer deadlines. In addition, this position communicates and coordinates with all departments to ensure successful outcomes. KNOWLEDGE, SKILLS, AND ABILITIES: • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitment made to clients., • Superior communication skills and ability to develop teamwork among staff., • Must be diplomatic and possess good human interaction skills., • Ability to multitask and prioritize., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge of all plant operations., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Ability to effectively communicate, coordinate and motivate others, helping wherever needed. EDUCATION AND EXPERIENCE: • High School diploma or G.E.D. combined with equivalent experience, • 5 years production control experience, • Experience with ERP Systems helpful JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $28.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Reporting directly to the CNC Group Leader, the CNC Operator is responsible for operating mills and lathes, deburring equipment and tools, and measuring equipment and tools. Advantech Industries is currently recruiting for skilled CNC Operators for our A shift. Hours are Monday – Friday, 7:30am – 4:00pm. Eligible candidates must have 6 months previous experience and a High School Diploma or GED. DUTIES & RESPONSIBILITIES: Run CNC Mill or Lathe: Observes machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper. Clean machine and work area Deburr Parts: Controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling and deburring. Inspect Parts: Inspects “first part” and inspects work pieces throughout the production run, for out-of-tolerance machining. SKILLS & QUALIFICATIONS: • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific equipment to be operated, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS Vacation Paid Sick Leave Holidays Health Dental Vision Life Insurance 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $17.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Position:Tool & Die Maker Reports to:Group Leader Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Constructs and repairs shop tools, gages, jigs, fixtures or dies used in the production and acceptance or inspection of parts from sheet metal. Minimum Qualifications: • High School diploma or equivalent, • Five or more years experience as a tool and die maker for the sheet metal industry, • Knowledge of characteristics of various metals needed to achieve final product., • Must be able to read and understand blueprints, • Makes tools and dies for forging, punching, milling, drilling, and other metal forming, die casting and metal cutting work., • Layout and plan work from mechanical drawings, models, rough sketches or other oral and written specifications., • Work with engineering and production to build Fixtures and Gages to ensure quality of parts, • Occasionally assist with making prototype and short run parts., • Maintenance and maintain customer dies and tooling., • Use a variety of tool and die maker’s hand tools and measuring instruments, • Understand the working properties of common metals and alloys., • Set up and operate a wide variety of machine tools and related equipment., • Has knowledge of shrinkage and draft and heat-treating of metal parts during fabrication as well as of finished tools and dies to achieve required results.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Manage purchasing, planning and scheduling functions for the COE. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Optimize inventory levels (raw & FG), capacity resources and production plans while achieving increased efficiency, decreased waste, and improved customer service., • Manage demand/supply planning., • Owns slow moving and obsolete raw material & FG inventory and manages within acceptable levels as defined in the budget, while working with necessary resources to mitigate., • Forecast production schedules. Review RCCP requirements and identify capacity concerns and OT needs., • Forecast material requirements and manage material purchases/receipts accordingly., • Negotiate prices, deliveries, and special programs including consignment., • Work closely with Technical Department & Corporate Procurement to ensure raw material portfolio consists of alternate sourcing for contingency/risk purposes as well as cost competitiveness., • Conduct supplier audits and have programs in place to measure supplier’s performance regularly., • Focus on strategies for improving supplier/customer business relationships and attaining mutual goals for cost reduction., • Supply quality improvement, value added/cost reduction projects as well as identify lead time reduction opportunities. Including process improvement and best practice implementation., • Forecast sales compared to budget monthly., • Works closely with Customer service manager and Customer Planning Specialist to ensure total supply chain flows without disruption. EDUCATION and/or EXPERIENCE Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience. Detail oriented. Must have excellent computer skills. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS Certified purchasing manager. Helpful but not necessary. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and color vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Maintenance Mechanics will work independently and with other plant personnel to perform preventative, predictive and routine maintenance tasks. They will troubleshoot issues, repair failures of production and facilities equipment, and ensure maximum equipment efficiency and effectiveness. All tasks will be performed while supporting the policies, goals and objectives of the company. responsibilities: • Execute all job duties with a strong safety mindset. Follow all permitting, job safety, and food safety programs and procedures every time., • Troubleshoot, repair and maintain plant machinery and equipment such as valves, conveyors, compressors, packers, fillers, palletizers, filters, membranes, separators, blow molders, labeling, and pumps., • Troubleshoot, repair or replace control devices such as switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters, etc. as needed., • Perform work order repairs, preventive maintenance inspections and repairs, equipment rebuilds and adjustments., • Able to set up and operate welders, drill press, grinder, hand tools and other metal working equipment., • Fabrication, innovation and modification of new and existing equipment., • Create work orders for equipment repairs that include parts and document labor hours, • Participates in plant safety, health and environmental programs. The minimum requirements for education and experience are listed below. Consideration will be given to individuals with an equivalent combination of education and experience. • Have at least 3 years' experience with hydraulics, pneumatics, mechanics and basic electrical repair., • Ability to read and interpret documents, schematics and drawings., • Ability to write detailed repair reports as well as good verbal communication., • Post-secondary education and/or a technical trade certificate is an asset., • Experience in the operation of a food beverage plant is an asset. Regular use of a variety of machines and tools is essential. Standing for extended periods is common. Hearing and vision within normal range is important for conversations, to receive ordinary information and to prepare or inspect documents, manuals and drawings. Strong math and reasoning ability is essential. Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business. • Sitting/Standing/Walking: Stands, walks and sits during completion of job responsibilities over a 12-hour shift., • Lifting/Carrying: Ongoing lifting requirements as job demands. Must be able to lift a minimum of 50 lbs. on an occasional basis., • Pushing/Pulling: Ongoing pushing or pulling requirements., • Bending/Stooping: Ongoing bending and stooping requirements., • Squatting/Kneeling/Crawling: Ongoing kneeling or crawling requirements., • Twisting/Turning: Ongoing twisting or turning requirements., • Climbing/Balancing Climbing and balancing is required during plant inspections, and other related job requirements. Must be able to climb ladders and work at elevations of 75 feet., • Reaching: Ongoing reaching requirements associated with job requirements., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Maintenance Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$36—$36 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: The most prestigious lending institutions entrust Zwicker & Associates, P.C. to protect their legal interests throughout the country. Zwicker & Associates P.C. is a national creditor rights law firm whose focus on ethics, compliance, and assertive representation of our clients’ interests makes us the industry leader in debt collection. Founded in 1991, Zwicker represents creditors in various consumer and commercial recovery and litigation efforts. Zwicker is headquartered in Andover, Massachusetts, and maintains office locations throughout the United States. Zwicker is hiring an Associate Attorney to join our team in Rochester, New York. The ideal candidate will be eager to learn and have exemplary organizational, written, and verbal communication skills. We look for candidates whose diverse talents, backgrounds, and experiences enable the Zwicker team to innovate and excel in performance collaboratively. We encourage and provide lifelong learning and training opportunities for our team members to build a strong foundation and a successful future with us. We strive to promote from within, offering excellent career advancement opportunities for high achievers. The base salary range for this position is $80,000-$100,000 per year Responsibilities of Associate Attorneys include • Communicate effectively and appropriately with team members and outside parties, • Draft, review, and file legal pleadings, motions, discovery, etc., in furtherance of active litigation files, • Review litigation case files and pleadings to determine appropriate action, • Advocate on behalf of the client’s interests at various litigation settings, • Utilize internal proprietary software to properly update and document the status of each account in the assigned inventory, • Analyze and process litigation inventory reports and litigation files, as assigned by the Managing Attorney, to ensure that proper litigation workflow is being performed according to the Firm and client expectations, • Comply with all client and firm standard operating procedures, • Ability to travel to various courtrooms within the branch office footprint as required, • Perform other duties as assignedRequirements:, • Admission to practice law in the state of New York, • Strong organizational and time management skills, • Proficient computer skills in Microsoft Office suite, including Word, Excel, and Outlook, • Excellent verbal and written communication skills, • Highly motivated self-starter, • Eagerness to learn, • Minimum of one year of litigation/trial experience, • Working knowledge of civil procedure, • Debt collection experience, • Be able to lift five pounds or more, • Be able to sit 90% of the work day at times, • Be able to bend at the waist and be mobile when needed, • Be able to read and comprehend position-specific documents and correspondence, • Be able to communicate in a common language with (or to) individuals or groups verbally and/or in writing, • Be able to operate a computer, phone, or equivalent device, • Be able to complete a minimum of a 40-hour flexible workweek schedule This is a full-time, full-benefit position. The benefits package includes medical, vision, and dental insurance, long-term disability insurance, life insurance, compensated time off, paid holidays, and 401K with match. No phone calls, no agencies, EOE, drug-free workplace. Please review our Applicant Privacy Notice: Each posted position will be active for at least five (5) business days, during which time all qualified and eligible employees can apply.

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Relies on limited experience and judgment to plan and accomplish goals., • A certain degree of creativity and latitude is required., • Assists in problem resolution in an effort to minimize equipment downtime., • Looks for opportunities to continually improve maintenance processes, • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Demonstrate adequate mechanical aptitude., • Proficient in the proper use of power and hand tools., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description TITLE: Business Development Account Manager – Performance Media About Soleo: Soleo Communications is a leading pay-per-call network and performance media company that helps businesses connect with new customers by providing targeted, cost-effective and measurable solutions. Our platform enables businesses of all sizes to quickly and easily launch campaigns that deliver highly qualified leads and calls to their businesses. We provide our customers with the ability to track and optimize their campaigns in real-time, giving them the data they need to make informed decisions and maximize their ROI. We partner with top-tier publishers and advertisers to ensure that our customers have access to the highest quality leads and calls available. Through our proprietary technology and data-driven insights, we make it easier for businesses to reach their goals and grow their customer base. Job Description: We are looking for a talented Business Development Account Manager to join our performance media team. The successful candidate will be responsible for maximizing the potential of existing accounts and proactively pursuing new business opportunities. This role requires strong relationship building skills, an in-depth understanding of performance media, and the ability to create and implement tailored strategies. The ideal candidate should be an ambitious, organized, and dynamic individual with a passion for sales and business development. This is a great opportunity to work in a vibrant and fast-paced environment and to make a difference in a growing company. Responsibilities: • Build and maintain strong relationships with key partners, • Develop new business and maximize the growth potential of existing partners, • Proactively pursue new business opportunities, using market research and networking to identify potential partners, • Identify and understand partners' performance media needs, • Develop and execute strategies to ensure partner objectives and goals are met, • Utilize project management principles and processes for successful onboarding and implementation of new accounts, • Create and manage partner presentations, documents, and contracts, • Monitor, analyze, and report on performance media results, • Provide ongoing campaign management and optimization, • Effectively and proactively communicate with partners, • Operate as the lead point of contact for all matters specific to partners, • Assist with operational requests or issue escalations as needed, • Travel to attend trade shows, partner meetings or other business engagements, • Stay up-to-date with industry trends and best practicesQualification and Experience:, • 2+ years of business development, account management, or project management in a high-value, business-to-business, solution consultation environment, • Experience in digital media, advertising, marketing, or performance media industry is preferred., • Business Degree (BA/BS in Business Administration, Business Management, Marketing, or related field), • Experience with CRM software and MS Office Suite, • Proactive approach to client consultation and problem solving, • Strong ability to manage multiple customer success projects/partners at a time, • Experience or familiarity with business analysis concepts and tools, such as market research and competitive analysis.Desirable Qualities:, • Proactive, responsive, and driven with the ability to think outside the box, • Excellent analytical and problem-solving skills, • Sound judgment and decision-making skills, • Detail oriented, • Ability to work independently with minimal supervision as well as part of a team, • Excellent time management skills with the ability to function in a fast-paced environment with fluctuating priorities and deadlines Powered by JazzHR Cedasep4ib

Job DescriptionJoin our Team of Employee Owners!Why work for a company when you can own it?Siewert Equipment, a Division of Cummins-Wagner Company, Inc. aims to remain the premier manufacturer's representative and distributor of mechanical equipment and machinery within our trading area. We serve the water, waste-water, industrial, process, heating, and cooling markets. Job Title: Service SupervisorDepartment: Rochester ServiceLocation: Rochester, New YorkReports To: Assistant Service ManagerJob Overview: Siewert Equipment, Division of Cummins-Wagner, is an established distributor and service provider for pumps & process equipment. The Service Supervisor oversees all Service Technician functions, assists the Assistant Service Manager & Coordinators with daily operations, and works with the Service Manager in support of department performance, growth, and development. This is a key role in a dynamic work environment and includes responsibility for service estimating, planning, scheduling, project management, quality workmanship, safety, training, teamwork and customer relations. This position requires an experienced and motivated professional with a high degree of technical and administrative skills, with the ability to drive and develop our service & repair business. Essential characteristics include excellent communication & supervisory skills, computer proficiency, ability to oversee multiple projects, and reasonable flexibility for travel and overtime.Our most successful Service Supervisors: • Possesses superior communication, analytical, and organizational skills, • Exhibit goal-oriented behaviors and time management principles, • Exude a customer-focused attitude, • Apply extensive attention to detail to all tasks, • Toggle between projects and responsibilities with ease, • Possess the ability to work outdoors in seasonal conditions and lift up to 50 pounds unassisted and 100 pounds assisted, • Proficient with mobile devices and computers; advanced proficiency with Excel preferred, • Must maintain an active driver's license with a clean driving record, • Minimum of 5 years' experience in maintenance and repair - emphasis on full-cycle payrollScope of Responsibility:, • Supervision and scheduling of multiple service technicians., • Work closely with individual technicians on job preparation, execution, and quality of workmanship, ensuring inspection findings and repairs are well-documented and performed in accordance with department policies and objectives., • Preparation of inspection & repair reports and assist with repair estimates & quotations., • Coordinate with partnering companies for services in areas such as metal machine & fabrication, electric motors and controls, vibration analysis, and crane & rigging services., • Build & nurture relations with sales team, customers, and principals, and do so with responsible utilization of service resources to balance customer satisfaction and company profitability., • Provide Service Technicians with the proper trainings, certifications, tools & other resources required to perform assigned work in a safe, quality, and cost-effective manner., • Maintain a clean, organized & professional work environment to include shop, warehouse, office, vehicles, and job sites., • Facilitate & document frequent “tool box” type meetings with emphasis on safety, workmanship, training, and examples of extraordinary service., • Accuracy and timeliness of technician timesheets and expense reports., • Assist with the improvement of and compliance with quality procedures and typical practices., • Employee training and development to improve department capabilities and versatility. Utilize Cummins-Wagner BTU system as an employee training and record-keeping tool. Flexibility to work overtime & weekends as required., • Reasonable travel as required.Cummins-Wagner Gives Back to Employees:, • Employee Stock Ownership Program, • Bonus Program, • Tuition and Certification Fee Assistance, • 401k Match, • Flexible Spending Account, • Comprehensive Health Insurance, • Life Insurance

Job DescriptionDescription: The Senior Quality Engineer will lead and facilitate the implementation of quality initiatives and their continual improvement. Responsibilities include lead, coach, and facilitate problem solving, analysis of data and continual improvement activities. Review and understand customer prints and specifications. Ensure the quality of the parts produced meets all expectations. Quickly and effectively take action when external or internal non-conformances are found. Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety process and procedures in accordance with the job and Company policy, • Be the Quality liaison between the customer and site manufacturing process for understanding quality requirements and working through quality issues., • Facilitate and promote use of appropriate problem-solving techniques (8D, 5-Why) for effective root cause analysis and successful corrective action. Interfaces with engineering and manufacturing to ascertain and implement corrective actions., • Provide technical support to operations ensuring consistent adherence to quality requirements., • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness., • Participate in the Advanced Product Quality Planning activities (NORP) to determine appropriate use of existing and new measurement systems during new tool or process design and startup., • Participate in the PT lot process to ensure that all quality checks as outlined in the MPCD (operation work instructions) are in place and will ensure that customer requirements will be achieved., • Coordinate, develop, and submit PPAP documents (including Control Plan, FMEA, Process Flow Diagram) for new product launches to meet customer requirements., • Generate efforts to achieve and surpass the company’s quality key metrics through the execution of QMS processes and by proposing new or modified approaches., • Understand and promote overall compliance with ISO 9001 specifications., • Manage priorities for inspection workload and support inspectors with the means to complete inspection tasks., • Interpret and explain GD&T callouts on customer prints for inspectors to follow., • Maintain performance evaluations of associates with evidence of their embodiment of the company’s core values and data on their achievement towards S.M.A.R.T. goals., • Demonstrate a productive work ethic and commitment to quality that sets the standard for the Quality Engineer role. May Supervise 4-6 inspectors across first and second shifts. Education Experience Bachelor’s degree (B.A.) in engineering or technical field or equivalent combination of education and experience. 7+ years related experience or training 2+ years experience with supervising Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Microsoft PowerPoint. Other Requirements: Knowledge and experience in metal fabrication, stamping and forming. Ability to use standard manufacturing measurement tools and equipment. SPC, GD&T, DOE, Gage R&R, statistical analysis. Basic understanding of mechanical processes, materials and machinery. Strong problem solving skills. Ability to travel (15%) to customers and suppliers. ASQ certification a plus. PC-DMIS experience a plus. Language Skills: Very High Skills: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment is regularly humid with extreme heat or cold. While performing the duties of this job the noise level in the work environment is usually loud

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success. LOCATION: Rochester, NY SUMMARY: The Corporate Analytical Lab Supervisor will oversee the operations of American Packaging Corporations Corporate Lab located in the Rochester NY facility. This role combines managerial responsibility of the laboratory with technical expertise of flexible packaging. This position is responsible for supporting all APC Centers of Excellence, Product Development, Sales, and Field Tech Service in detailed analysis of product samples. Most of the output of the lab is for internal use, however there are customer interactions and communications as well. This role involves managing and developing laboratory staff, providing leadership and training, keep all SOP’s and documentations up to date, support the hiring process for interns and coops. The Corporate Laboratory Manager collaborate with all departments on product development. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Conduct standardized and customized testing related to flexible packaging accurately and in a timely manner – this role includes daily testing to complete lab requests along with managing the lab, • Monitor and implement laboratory safety protocols to meet and exceed APC’s safety expectations, • Develop and implement testing plans for package and structure analysis and document composition and physical properties to assist development of new APC products, • Proficient in analytical, logical, systematic, and statistical thinking, • Communicate effectively with the leadership team, technical managers, engineers, sales, customers, and suppliers, • Provide mentorship and training to Coops, Interns, and Technical Specialists, • Ability to understand the goal of a lab request and translate into technical testing requirements, • Maintain an archive of analyzed competitive structures., • Coordinate with other labs, including APC and external labs, to have testing completed., • Recommend / research new equipment and instruments, and draft capital requests, • Conduct periodic audits of lab equipment accuracy and repeatability., • Obtain training and maintain skills in conducting and interpreting complex analytical tests- GC, FTIR, DSC, etc., • Conduct product compatibility, abuse resistance, failure analysis, and other tests and investigations in support of Field Service, Quality, and Technical., • Write and maintain Standard Operating Procedures pertaining to analytical equipment as needed., • Maintain laboratory consumables and supplies (i.e.: PPE’s, glass ware, calibration standards, equipment accessories, chemicals, etc…), • Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Laboratory experience, preferably in manufacturing, films and polymers, or flexible packaging. • Knowledge of laboratory procedures, safety, and regulations., • Experience in quality control/assurance and quality management systems., • Strong leadership, communication, and organizational skills., • The ability to manage multiple tasks in a dynamic environment. EDUCATION and/or EXPERIENCE Bachelor of Science or Master’s degree in a relevant scientific field, or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze and interpret common scientific and technical journals, equipment maintenance contracts and other legal documents. Ability to respond to common inquiries or complaints from customer, regulatory agencies or members of the business community. Able to prepare reports on lab testing and results that are customer ready. Ability to effectively present information to the technical community, top management, customers, manufacturing, sales, and other public groups. MATHEMATICAL SKILLS Ability to apply foundational and advanced mathematical concepts DATA ANALYSIS AND STATISTICS • Understanding and Interpreting Data: Corporate Laboratory Manager must collect, organize, and interpret data generated from lab tests, experiments, and research effectively., • Statistical Methods: Proficiency in statistical methods, software, and tools is essential for analyzing data and drawing meaningful conclusions., • Validity and Reliability: Ensuring the validity, reliability, and integrity of data is crucial to avoid errors, biases, or inconsistencies. REASONING ABILITY Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. OTHER SKILLS/ABILITIES: Proficiently operate the following: personal computer, copy machine, and fax machine. Additionally, must successfully work with Excel and Microsoft Word software and general data base software. Maintain confidentiality with critical company product information, effectively manage multiple projects/priorities, meet required deadlines, possess excellent organization skills and effectively communicate with all internal and external customers. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Any lifting over 50 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, vibration and fumes or airborne particles (a specific list is available upon request). The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description M/E Engineering is interviewing for an entry level CAD Operator position in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop professional work knowledge and abilities requiring application of standard techniques, and procedures in carrying out computer aided design (CAD) and Building Information Modeling (BIM) tasks., • Exercises judgment required in details of work and in making preliminary selections and adoptions of drawing layouts, standard details, symbols and procedures., • Performs work assigned by BIM Lead under supervision and training., • Assists engineers with Revit issues, reports unfamiliar problems to BIM Lead for solutions., • Takes calls from coworkers on Microsoft Teams with camera on., • Leads BIM coordination meetings with architects and engineers, determines project setup requirements., • Creates Revit projects on ACC, cleans and links AutoCAD drawings, adds required team members., • Builds knowledge base in order to solve common Revit, Navisworks, ACC and AutoCAD issues., • Copies, creates, and maintains detail libraries in Revit and PDF., • Assist with conventional designs, investigations, and surveys for which there are standard procedures., • Prepares sketches and other activities of standard procedures and limited scope requiring knowledge of principles and techniques commonly employed., • Applies standard practices and techniques, adjusts and correlates data, recognizes discrepancies and follows design through a series of related steps., • Files blueprints, catalogs, etc., • Duplicates and check submittals under review of Engineer., • If assigned BIM/CAD Coordinator duties, the following is required:, • Works with BIM/CAD Coordinator from Architect and other sub-consultants to determine deliverable requirements., • Updates REVIT Model and CAD Backgrounds, then notifies design team, • Coordinates and oversees deliverables. Works with the Administrative group and project to deliver set as expected., • Performs conventional designs, investigations, and surveys for which there are standard procedures., • Performs all other related duties as assigned.Education and Experience, • High school diploma. Technical school training or Associate degree preferred.Compensation Powered by JazzHR KVjYEeaNHP

Job Description Contract with potential to convert to full-time 2nd Shift: Monday to Thursday 2:30pm to 1am. Training: Is on the A shift Monday-Friday 730am-430pm with 1 hour lunch or possibility to come in at 6am and leave early. Shift Differential: additional 10% shift diff on top of above base will be provided when training period (6-weeks) is over Job Summary: Sets up and out puts jobs by performing the following duties. Key Responsibilities: • Reads job packet and understands job specifications., • Sets ups jobs specified by job ticket., • Loads correct substrates and or coatings., • Cleans, and changes in coatings and performs maintenance on finishing machine when necessary., • Knowledge of Flexography printing is a plus., • High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence., • Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to document clearly and communicate required information to employees/departments for production., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Geometry and dimensional knowledge are helpful., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations., • Operator must have a general understanding of printing software as well as design software., • The employee must occasionally lift and/or move up to 10 pounds.

Job Description We are seeking an experience commercial HVAC Mechanic to join our team! We are looking for 5 years of experience, ideally with some in a data center in the Rochester, NY area. This role will have travel, so owning a reliable van or truck to transport your tools and replacement parts is integral. This is a Monday thru Friday role, with no weekend work! Job Details: Installs, maintains, monitors, and repairs all HVAC systems in assigned telecommunication facilities. Completes all preventive maintenance tasks including coil cleaning, filter and belt changes, lubricating bearings/motors, operational tests comprised of checking voltages, amperages and refrigerant pressures and any other necessary tasks to keep HVAC and mechanical systems operating as designed. • Responds to emergency calls within market to analyze and resolve complex mechanical, electrical, and/or other building related problems to prevent or minimize network service outages., • Operates building management system to troubleshoot HVAC systems and maintain energy efficiency and power utilization targets. Interacts with internal customers, contractors, suppliers, and engineers to exchange information to ensure systems run at peak conditions and identify end of life equipment for budgeting purposes., • Participates in commissioning activities and testing procedures to ensure new and modified equipment/systems are functioning as expected., • Keeps detailed records of assignments, work activities and required equipment maintenance history in Computerized Maintenance Management System., • Uses tools, such as common hand and power tools - hammers, hoists, saws, drills, and wrenches, precision measuring instruments, electrical and electronic testing devices, refrigerant gauges, oxy-acetylene torch rigs, vacuum pumps, refrigerant recovery systems and other tools necessary to perform job requirements., • 5 years of commercial HVAC experience, • Data Center HAVC experience a plus, • Local to: Rochester, NY, • Must have EPA 608 Universal Certification

Job Description Job Title: Registered Nurse I Department: Interventional Radiology Location: Rochester General Hospital Hours Per Week: 36 Hours Schedule: Mon - Fri (Days) plus on-call (Evenings/Weekends) Sign-On Bonus: Up to $15,000 SUMMARY: As a Registered Nurse (RN), you’re the engine and the heart of patient care at Rochester Regional Health. You make a positive difference every single day in the lives of our patients, their family members and visitors – going above and beyond to meet their needs with courtesy, kindness, respect and compassion. Interventional Radiology (IR) is a cutting-edge specialty that uses advanced imaging technologies to perform minimally invasive procedures, often replacing the need for traditional surgery. Common treatments include uterine fibroid embolization, kyphoplasty, tumor ablation, and targeted therapies like chemoembolization and thrombolysis. IR offers faster recovery, fewer risks, and innovative solutions for complex conditions. RESPONSIBILITIES: * Provides high-quality, patient-centered, clinical care * Performs initial and ongoing assessment of the patient, utilizing appropriate data (i.e. physical, psychological, educational and risk-screen data appropriate for the chronological / developmental age of the patient). * Communicates and documents assessment of patient with the interdisciplinary team. Utilizes all available resources in order to meet the needs of the patient and family. * Develops and documents plan of care, treatment and services which is individualized and appropriate for the patient needs, strengths, limitations and goals. * Complies with organizational policies, procedures and protocols including policies governing safety, medication administration and documentation. * Revises plan of care based on ongoing evaluations and updates documentation appropriately. * Completes at least one clinical research utilization (CRU) form for submission to Nursing Research Department utilizing a research article from the last 5 years from research performed in the United States. COMPLIANCE: * Completes a minimum of 5 nationally approved contact hours (CNE or CEU) per year. * Completes mandatory in-services and health screens in timely manner. * Maintains Basic Life Support (BLS) certification. REQUIRED QUALIFICATIONS: * Diploma or Associate’s Degree in Nursing * Registered Nurse license in New York State. * Basic Life Support (BLS) certification. PREFERRED QUALIFICATIONS: * Bachelor’s Degree in Nursing preferred. * At least 6 months RN experience preferred EDUCATION: AS: Nursing (Required) LICENSES / CERTIFICATIONS: BLS - Basic Life Support - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA), RN - Registered Nurse - New York State Education Department (NYSED)New York State Education Department (NYSED)New York State Education Department (NYSED) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee’s physician or delegate will be considered for accommodations. PAY RANGE: $37.18 - $49.92 CITY: Rochester POSTAL CODE: 14621 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.

Join Vetted Locums for high-demand Family Medicine contracts at $150-$210/hour across primary care clinics nationwide. Responsibilities: • Provide comprehensive primary care for all age groups., • Diagnose and treat common conditions and chronic diseases., • Promote preventative health and wellness screenings., • Coordinate referrals and follow-up care. Qualifications: • MD or DO with Family Medicine board certification., • Must hold or obtain an active state license (support provided). Skills: • Preventive medicine and chronic care management., • Clear and compassionate patient communication., • Strong EMR documentation practices.