Construction & Trades jobs in Orange, California - Page 10Create job alerts

Job Description Position Overview: This position is responsible for diagnosing and performing all repairs on customer owned equipment in the field. This will include troubleshooting, overhaul, cleaning, inspecting and assembling parts in pleasure and/or commercial marine environment. Must be skilled with mechanical and electrical tasks and own a complete set of hand tools. Principal Duties and Responsibilities (Essential Functions): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform maintenance and repair of complex mechanical, electrical, and diesel systems on a variety of customer equipment and tools while using a high degree of independent judgment., • Responsible for service documentation, and training of lower-level technicians, when necessary., • Ability to accurately order needed parts from vendors, and travel to customer sites., • Conduct inspections and diagnostic tests; identify worn out and damaged parts., • Correct diesel engine deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission., • Complete required paperwork to reflect hours within each job., • Must be able to adhere to a regular work schedule., • Ability to understand the importance of time management, standards of operating procedures, owner’s manuals and product/warning labels., • Must possess solid written and verbal communication skills and be able to perform basic computer operations., • Strong organizational skills., • Must exhibit a high level of safety consciousness and a clear understanding of equipment safety., • Ability and willingness to travel as needed on short notice., • Must possess and maintain a valid driver’s license., • High school diploma and/or equivalent combination of education or experience., • Must have an equivalent of no less than Two years’ experience with technical repairs on diesel engines., • Strong technical/mechanical skills and experience, and diesel product knowledge required., • Post-secondary vocational education strongly preferred. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions. The noise level in the work environment can be loud. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to communicate with customers and must be able to exchange accurate information. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing most of the day. The employee must frequently lift and/or move items up to 70 pounds. Must be able to detect parts and machinery from a distance and up close. Tool Requirements: • Complies with Company policies and procedures., • Performs job safely with respect to others, property and to individual safety., • Works effectively with others in the Company to encourage teamwork and productivity. Northern Lights Power & Energy, Inc. and the Northern Lights, Inc. Family of Companies are an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Microelectronics PCB Assembly Technician (IPC-A-610) Location: Garden Grove, CA Shift: 1st Pay: $32–$40 per hour DOE A day in your role When you power up your workstation on first shift, the microscope comes into focus, tweezers in hand, and precision takes over. You’ll assemble miniature electronic components on PCBs, place fine-pitch parts with steady control, and perform hand soldering that meets demanding IPC-A-610 Class 2 or Class 3 criteria. Your day moves between interpreting assembly drawings and schematics, executing meticulous builds, and verifying your work through in-process and final inspections. You’ll collaborate with engineering and quality teams to resolve any anomalies and continually refine how work gets done—all while following strict safety and quality procedures. What you will do • Build and rework PCB/electronic assemblies under a microscope using tweezers and precision tools, • Hand solder fine-pitch components and wires to boards and subassemblies, • Inspect work against IPC-A-610 Class 2 or Class 3 standards, • Read and apply assembly drawings, work instructions, and schematics, • Conduct in-process checks and final inspections for quality and compliance, • Partner with engineering and quality to troubleshoot and improve processes, • Maintain strict adherence to safety and quality protocols What you bring, • 2+ years in micro-assembly or electronics manufacturing, • IPC-A-610 certification (required), • High school diploma or equivalent; technical training/certification preferred, • Expertise in hand soldering and microscope work, • Exceptional manual dexterity and attention to detail Core proficiencies, • IPC-A-610, • Soldering, • Micro Soldering, • PCB Assembly (Printed Circuit Board Assembly), • Fine-Pitch Soldering, • Microscope Proficiency, • Mechanical Assembly Skills Tools you’ll use, • Call our office at (866) 949-4894, • Administrative, • Light Industrial, • Skilled Trades

Job DescriptionDescription: Job Title: Repair Technician Department: Operations Reports To: Field Technical Support Manager Supervises: N/A Job Classification: Full-Time, Hourly, Non-Exempt Salary Range: $25-$40 per hour, depending on location, experience, and skillset SUMMARY OF ESSENTIAL DUTIES AND RESPONSIBILITIES The main role of the Repair Technician is to provide technical expertise, training, and support for existing and prospective clients. Additionally, the daily role will be to visit clients per schedule, test water chemistry, adjust controllers and programming, cleaning and maintaining chemical feed equipment, as well as record keeping and communication. More duties may be applied as clients and Vivoaquatics services and needs change. Key Responsibilities Include: • Onsite visits to new and existing clients on a regular basis, • Train clients, channel partners, etc. on chemical feed systems and VivoPoint software, • Provide technical support, repair and installation of VivoPoint chemical feed systems, including controllers, modems, feed devices, tubing, injectors, etc., • Provide technical support and perform installations, repairs, and maintenance on pumps, filters, heaters, etc., as needed, • Perform warranty repair and required maintenance of VivoPoint chemical feed systems, • Provide regular chemical water tests and recommendations to clients, • Complete onsite assessment and provide information and worksheet data as requested, • Take photo documentation of job sites, projects, and work completions as requested, • Provide material and labor cost estimates for repairs and installations as requested, • Record all service visit information on VivoPoint via entering manual readings, entering/updating service orders, and completing equipment profiles, • Record detailed notes on all service visits in NetSuite, • Communicate visits, repairs, and follow up information to supervisors in a timely manner, • Must wear appropriate PPE at all times, • Must communicate any needs for specialty tools, PPE, training, or support to supervisors immediately upon discovery of need, • Must maintain company vehicle and appearance at all times. Vehicles must be serviced and kept clean and organized at all times, • Perform regular inventory or parts and equipment within your possession as requested, • Communicate with managers and billing department regarding job and project completions and parts used in a timely manner, • Must be able to gather parts and equipment from supply houses and other locations as requested, • Attend meetings, trainings, and company gatherings as needed, • Responsible for thorough knowledge of management company policies and property community policies, • Additionally duties may be assigned based on changes in client needs and in company needs and services offeredRequirements: QUALIFICATIONS • Excellent interpersonal communication skills, • Must maintain the highest level of professionalism at all times: must maintain a professional appearance, and must have a friendly and professional attitude, • Must possess high organizational skills and be detail oriented, • Maintain a strong work ethic, be self-motivated, and have a high sense of responsibility, • Strong computer skills in MS Office (Email, Word, Excel, Calendar), GSuite (Gmail, Google Sheets, Google Docs, Calendar), or similar., • Strong knowledge of commercial water chemistry and balancing water chemistry, • Strong knowledge of various manufacturers’ circulation and filtration systems and chemical automation systems and chemical feed devices, • Exceptional knowledge of swimming pool regulations and codes, • Ability to travel out-of-state and overnight when needed, • Ability to work nights and weekends as needed, • Experience and first hand knowledge of electrical and plumbing systems and use of power tools, • Must be able to lift, move, carry up to 75lbs, • Certified Pool Operator (CPO) certification required. Candidates must be able to obtain a CPO license within their first 90 days. SUPERVISORY RESPONSIBILITIES • N/A EDUCATION and/or EXPERIENCE • 2+ years of experience in the aquatics industry required, • 2+ years of technical work experience with commercial aquatics that includes experience with water chemistry and balancing, electrical and plumbing systems, • 2+ years of technical work experience with installing, repairing, maintaining commercial circulation and filtration systems and chemical automation and chemical feed devices, • Currently or previously held CPO license preferred, • Valid driver license that has been valid for at least the last 2 years, • Must be over the age of 21, • Ability to communicate effectively in English. Bilingual a plus!, • Successfully pass a thorough background check, including a DMV/driving record check Benefits & Perks • Medical, • Dental, • Vision, • Life, • LTD, • Pet Insurance, • Paid Vacation Time, • Paid Sick Time, • Paid Holidays, • Paid Floating Holidays, • Employee Assistance Program, • Employee Discount Program, • Employee Referral Program, • Career Planning

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Free uniforms, • Health insurance Job Description: The Sr. Field Service Technician is responsible for the quality and completion of all service work. Additionally, the Sr. Field Service Technician performs advanced troubleshooting and complex service diagnosis. This position is also responsible for training and developing other Field Service team members. The Field Service Technician must have the ability to work both independently and as a member of the branch team. The Field Service Technician will interact closely with the Branch Manager, the Dispatch department, and the Field Service Team. Job Responsibilities: • As a Field Service Technician, you are to follow OSHA safety guidelines to complete on-site solar electrical services while obtaining all necessary information., • Interact with customers and coworkers, able to work both independently and as part of a multi-tasking team in a professional environment., • Troubleshoot, maintain, service, and repair residential solar systems and associated equipment and provide customer satisfaction., • Able to perform required preventive maintenance activities on Residential PV systems, and capable of training/mentoring others in the team as needed., • Perform remote on-site customer services, including installing, commissioning, troubleshooting, and repairing residential solar systems and related equipment., • Complete thorough documentation and reports upon completion of each assigned job to comply with deliverables for our Partners., • Proactively resolves equipment and system issues and can troubleshoot and overcome obstacles onsite., • The focus of this role would primarily be solar PV systems., • Minimum of 3 years experience with PV equipment and installation., • Excellent interpersonal verbal and written communication skills., • Experience maintaining and servicing solar monitoring systems (SolarEdge, SMA, SunPower Monitoring, Enphase, and other various monitoring sites)., • Experience maintaining and servicing solar inverters/micro-inverters (SMA, PVI, SolarEdge, Enphase, Fronius, Delta)., • Ability to read electrical plan sets and equipment manuals., • Previous experience working with power/hand tools, electrical equipment, and the ability to navigate., • Ability to work at great heights, work in extreme environments, perform prolonged periods of repetitious duties, lift at least 30 pounds frequently., • Must have and maintain a valid drivers license and an acceptable and safe driving record.

Job Description Responsibilities include: • Provide grading observations., • Provide compaction testing on soils, aggregates and asphalt., • Provide special inspections per additional inspection certifications in accordance with approved project documents., • Document project grading activities., • Provide sampling and Quality Control of concrete and/or grout. Requirements Required Competencies: • Ability to work well in a team environment and communicate clearly with coworkers, clients, consultants, contractors and potential clients., • Nuclear gauge usage certification., • ACI Field Technician Grade 1 license., • ICC Soils Inspector License is a plus., • ICC Reinforced Concrete is a plus., • Excellent written and oral communication skills., • Excellent computer skills including but not limited to Microsoft Office Outlook, Word, Excel, etc. Benefits Excellent benefits package including medical, dental and 401K Plan. Salary commensurate with experience.

Job DescriptionField Technician Founded over 40 years ago, American Leak Detection is the world leader in the accurate, non-destructive detection of hidden water, sewer, gas and swimming pool leaks. American Leak Detection sets the standard for non-invasive leak detection and repair using proprietary methods and the most advanced, sophisticated technology.Our customers include residential homeowners and industry professionals like plumbers, building contractors, insurance adjusters, apartment managers, drain cleaners, restoration specialists, and municipalities. American Leak Detection is looking for a highly motivated, independent worker to join our team as a Field Technician. Great candidates will be mechanically inclined, comfortable with learning and using new technology, and also be ready to work both inside and outside in all weather conditions. This position requires intermittent, often heavy, physical labor. We provide paid training, all the tools needed to perform your job duties, and also a company vehicle for business use. Duties include: * Leak detection: * Underground piping systems * Sewers * Gas systems * Swimming pools and spas * Line location * Plumbing related repair work * Advanced training includes scuba certification and mastering underground line tracking, video, ultrasonic, infrared and video technologies. Required Qualifications: * Valid California Driver’s License * Clean driving record * Must be able to pass a criminal background check and drug screening * Ability to move/lift up to 100 pounds * Experience using power tools * Excellent communication skills, both written and verbal * Ability to work independently * Neat, professional appearance * Familiarity with leak detection, plumbing, irrigation and/or experience in plumbing slab/sewer work * Must be able to meet physical labor requirements Preferred Qualifications: * Mechanical and labor background Relevant Work Experience: 1+ year Education Level: High School or equivalent Salary/Wage: Competitive salary, negotiable with experience Benefits: Paid vacation, paid holidays, 401K matching, health insurance, paid training Start a career today with American Leak Detection!

Job Description BANK EQUIPMENT TECHNICIANS NEEDED IN IRVINE, CA Do you enjoy the freedom of the “GIG” economy, but you are tired of the ups and downs of the income? Are you a self-driven entrepreneur? We can provide you with that same freedom, but with a steady income! Join us and upgrade your earnings, in our commitment to pro-active service work! We have the work waiting for you! Cennox has a plan that will not only give you the income you’re looking for, but with paid training, equipment, mileage reimbursement. Cennox is currently seeking a Bank Equipment Technician based in the Irvine area to cover equipment cleaning and maintenance work throughout Irvine, Los Angeles and surrounding areas. This Full-time position offers an extremely flexible schedule, competitive pay, opportunity for travel, paid training, and did I mention the extremely flexible schedule, and best of all the chance to become part of a rapidly growing company. Please note that using your personal vehicle is required for this position. Compensation: Minimum Wage plus piece rate with an annual earning estimate of $50,000 Duties and Responsibilities: • Clean and detail exterior, updated signage/decals, inspect electrical, perform minor refurbishments, and change light bulbs of Automated Teller Machines and Kiosks, • Remove nonstandard signage and other materials (e.g. stickers, posters, decals, graffiti, etc.) that may be affixed to ATM or the immediate surrounding area, • Clean stainless-steel surfaces inside bank vaults, • Wipe down bollard, as instructed, • Ensure the 10-ft radius surrounding machines is clear of trash before exiting work site, • Complete project work which may include alarm surveys, ADA compliance inspections, software updates, site surveys, lighting measurements, other inspections, etc., • Sanitize all high contact surfaces, • Regularly inspect and dry-wipe ATM's and drive-up banking equipment including ATM surrounds and night depositories, etc., • Take meticulous photographs of required devices, forms, and areas, • Organize and manage paperwork and inventory, • Smart phone familiarity and tech-savvy with strong mechanical/electrical aptitude and eagerness to learn new skills, • Working knowledge of Microsoft Office (Word, Outlook, Excel), • Strong work ethic to work independently and reliably meet deadlines with minimum supervision, • Great communication/customer service skills and ability to interpret/execute written instructions, • Previous work with electrical functions, general repairs, or similar fieldwork is preferred, • Ability to lift/move 50 or more pounds, stand, climb, bend, stoop, and reach freely, • Ability to work both indoors and outside in all-weather and sit/drive for extensive daily travel, • Ability to stand for extended periods of time, • Ability to carry and climb a 10-foot ladder, • Flexible work schedule, paid training, and opportunity for travel, • Company-provided tools, uniforms, and Android smartphone, • Eligibility to enroll in 401K after one year of employment Notice on Use of AI in Hiring As part of our commitment to fair and efficient hiring practices, Cennox uses JazzHR’s TalentFit AI tool to assist in evaluating candidate applications. This technology helps us match applicants to job requirements based on qualifications and experience. All hiring decisions are ultimately made by our human recruiting team. If you have questions or concerns about this process, please let us know during your application. E-Verify Cennox participates in the E-Verify program to confirm the identity and employment eligibility of all new employees. For more information, please visit . Powered by JazzHR D8PQWBGhMB

Job DescriptionBenefits/Perks • Recession-Proof Industry Providing The Opportunity To Give Back, • Competitive Compensation and Benefits Job Summary A Combo Water/Mold Technician is responsible for the daily service of mitigation assignments, as well as remediation assignments, New referrals, and existing, as well as customer and manager communications to accomplish their duties. Responsibilities • Be available by phone and email during scheduled on-duty hours, • Communicate daily with the Operations manager/Assistant OPS Manager, • Maintaining a company-issued vehicle, • Fleet Vehicle Handbook, SDS sheet, Equipment, Tools, Consumables, vehicle maintenance, • Maintain a daily update of all files in the MICA app, • Be available 24/7 when working on-call rotation, • Communicate daily with customers/Insurance personnel/other team members, • Maintain good time management with handling existing/new assignments, • Be able to listen and follow safety protocols, as well as wear proper PPE, • Be able to read and understand a mold remediation estimate to start new assignmentsQualifications, • Restoration (Mitigation, Remediation, Construction) experience a plus, • Experience working with Insurance claims is a plus, • Excellent communication and customer service skills, • Willing to travel in times of need, • CAT situations, • Helping other Areas, • Must be knowledgeable of Ipad features, • Must be able to listen and follow directions, • Must be able to lift and maneuver heavy equipment/contents, • IICRC Certifications a plus (WRT/ASD)

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • High School Diploma, GED or equivalent, • 3-4 years + Mechanical assembly experience, • Quality Control and laser experience., • Experience with Standard Operating Procedures and process requirements., • Proficient computer skills including familiarity with Microsoft Office (Excel, Word, Access), • Visual and Mechanical inspection and troubleshooting skills, • Ability to stand and walk through a full work shift doing repetitive assembly tasks., • Ability to lift and carry items weighing up to 50 lbs.Responsibilities:, • Prepare parts for assembly, assemble parts, • Work with Laser machine, • Follow SOP's regarding acceptance criteria, • Perform visual inspection, • Perform mechanical assembly, • Perform final inspection

Job Description Our Elite Home Pro's mission is to show our residential customers that they are truly valued as we have a strong emphasis on providing an unparalleled 5-Star experience unmatched in the Smart Security industry. As an EHP, you'll play a pivotal role in what matters most to our customers: enhancing the safety and security of their families and homes. We know what it takes to be successful here at SafeStreets. If you have a passion for making a difference in people’s lives, a strong sales background, and a winning mindset, we will assist you in creating a seamless transition into a new career. The process is simple. There is no cold calling or D2D sales involved. We get your foot in the door by connecting customers to you who are already interested in ADT home security. In-home appointments are scheduled and provided for you by our Inside Sales team. By helping customers review their security options on-site and move forward with a custom home security package designed by you, you will have the opportunity to earn uncapped sales commissions based on how the homeowner decides to protect their home. The best part is you control the process from start to finish, leaving the customer better protected than after you arrived. Looking to change industries? Feel confident in knowing that we have Pro’s with backgrounds in every type of industry that have made a seamless and successful transition to the role of an EHP. With a paid training program provided, we have all the tools to teach you what you need to know. What do you need to be qualified for this position? Nothing more than a passion for customer service, a strong sales background, and a desire to help keep others safe and secure. We provide the tools/equipment, paid training, and post-training support you will need. We even hand deliver the customers to you – no need to go searching for your own leads! SafeStreets is always evolving! SafeStreets set out to make some big changes to kick off 2025 with how our Elite Home Pros are paid and we now have the best compensation plan in the industry! Here's what our EHP's look forward to: • Highest sales commission opportunities in the industry with our technicians earning on average 25% commission - UNCAPPED!, • More than 30% of our field earned over $100k+ in 2024, • Increased Mileage pay with pay kicking in nearly 3x earlier than previously, • Paid for every installation action taken on site, • Same-day and Holiday bonuses, • More upgrade commission options, • Doubled Referral pay opportunity What we Offer: Competitive base salary with generous and uncapped commission structure Company-provided equipment and select tools Remote and independent work environment Ongoing training and professional development opportunities Opportunities for career advancement within a rapidly growing organization Scheduling flexibility Medical/Dental/Vision/Life Insurance/401K The Responsibilities: Helping homeowners create customized Smart Security solutions for their personal needs 5-star Customer interaction – every day is a new opportunity; you’ll be the first face-to-face contact our customers have with SafeStreets! Customized installation, troubleshooting, and demonstration of ADT-monitored security systems Qualifications: Entrepreneurial and career oriented mindset Excellent communication, negotiation, and interpersonal skills Reliable vehicle and valid driver's license Proof of vehicle insurance (100/300/100 minimum) Smartphone/tablet SafeStreets values the safety of our employees and customers. That is why we are committed to providing personal protective equipment (PPE) or stipends to our technicians to further ensure their safety. This job entails meeting certain physical requirements, including the ability to work above head level, carry loads of 30-50 pounds (such as equipment boxes and ladders), operate power tools, and navigate confined spaces like attics and crawl spaces. Safe Streets is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or terminate, will be based on merit, competence, performance, and business needs. Safe Streets does not discriminate on the basis of race, color, religion, sex (including pregnancy and gender identity), marital status, age, national origin, sexual orientation, disability, genetic information, military service, or any other status protected under federal, state, or local law. Applicants have rights under Federal Employment Laws. FMLA - EEO- EPPA -

Job DescriptionField AI is transforming how robots interact with the real world. We are building risk-aware, reliable, and field-ready AI systems that address the most complex challenges in robotics, unlocking the full potential of embodied intelligence. We go beyond typical data-driven approaches or pure transformer-based architectures, and are charting a new course, with already-globally-deployed solutions delivering real-world results and rapidly improving models through real-field applications. About the Job We’re building the estimation and navigation stack that keeps our legged and humanoid robots balanced, aware, and mission-ready—indoors and out, with or without GPS. You’ll design and ship real-time estimators and fusion pipelines that combine IMU and GNSS/GPS/RTK with legged-robot proprioception (joint encoders, torque/force & foot-contact sensors) and exteroception (cameras, LiDAR, radar/UWB). You’ll take algorithms from log-replay to rugged field performance on embedded/Linux targets, partnering closely with controls, perception, and planning.What You’ll Get To Do • State Estimation for Legged/Humanoid Bases, • Design and tune EKF/UKF error-state filters for floating-base pose/velocity, COM, IMU biases, and contact states., • Fuse IMU, joint encoders, foot F/T & contact sensors; implement ZUPT/ZARU, slip handling, and kinematic/dynamic constraints., • Expose clean interfaces (frames/timestamps/covariances) to whole-body control and footstep planning., • Perception-Aided Localization & Mapping, • Stand up VIO/LIO pipelines (stereo/RGB-D + LiDAR) for GPS-denied operation, with map-based relocalization and loop closure., • Add global aids—GNSS/RTK, UWB beacons, prior maps—and blend filtering with factor-graph smoothing when advantageous., • Manage drift/consistency with robust outlier rejection, gating, and integrity monitoring., • Calibration, Timing & Robustness, • Own time sync (PTP/Chrony/hardware triggers) and multi-sensor calibration (Allan variance for IMU, camera-IMU/LiDAR-IMU/base extrinsics, encoder offsets)., • Build health monitoring, FDIR, and graceful-degradation behaviors for harsh terrain and intermittent sensors., • Establish KPIs (ATE/RTE, NEES/NIS, availability) and automated regression tests., • Tooling, Simulation & Field Operations, • Create log-replay pipelines, datasets, and dashboards for rapid iteration and performance tracking., • Validate in sim (Gazebo, Isaac etc) and in the field (stairs, rubble, ramps, slippery floors)., • Optimize and deploy on embedded targets (Jetson/x86), profiling latency, memory, and numerical stability.What You Have, • Strong fundamentals in estimation & sensor fusion (EKF/UKF, error-state, observability/consistency, covariance tuning)., • Hands-on with IMUs (strapdown mechanization, bias/scale, coning/sculling) and GNSS/GPS/RTK (loosely vs tightly coupled INS)., • Experience with legged-robot proprioception: joint encoders, foot contact/pressure, torque/force sensors; using kinematic/dynamic constraints in estimators., • Proficiency in modern C++ (14/17/20) on Linux; Python for tooling, analysis, and log processing., • Comfort with SO(3)/SE(3), Lie-group math, and non-linear optimization., • Integration with at least two of: cameras (VIO), LiDAR (LIO/scan-matching), UWB, magnetometer/barometer, radar., • Familiarity with ROS 1/ROS 2, CMake/Bazel, Docker, CI/CD, and reproducible experiments., • Proven track record shipping research-to-production algorithms on real robots with field test cycles., • BS/MS/PhD in Robotics/EE/CS/AE or equivalent practical experience.The Extras That Set You Apart, • Factor-graph SLAM/VIO (GTSAM/iSAM2) and non-linear solvers (Ceres/g2o); hybrid filtering + smoothing in production., • Whole-body/legged tooling, momentum/COM filters, terrain estimation, and contact-rich datasets., • Robustness techniques: adaptive noise models, M-estimators/gating, data association, map-based relocalization., • Experience with GPS-denied navigation at scale (warehouses, construction, urban canyons)., • Real-time/performance chops (RT-PREEMPT, lock-free pipelines, deterministic logging, on-robot telemetry)., • Embedded/GPU acceleration (Nvidia/CUDA) for perception-aided estimation. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job DescriptionDescription: Generator Supercenter is hiring! We are the largest Generac Residential/Light Commercial Generator Sales and Service Company in North America. Generator Supercenter is looking to hire a full time Licensed Journeyman Electrician to join our team in our new location in Orange County to install home standby generators. Responsibilities: • Install and repair generators., • Troubleshoot motor and control systems, • Assist in load-testing generator packages, • Assist in other phases of preparation and setting of power generation equipment and products such as trenching, piping, mechanical components, and civil assembly for setting power generation packages, • Perform routine maintenance, • Adhere to all quality and safety codes, • Health Benefits after 180 days are available, • A company van is provided, • Company Uniforms, • Paid Vacations and Holidays after 1st Year, • Training and certifications provided upon completion of classes. These are nationally recognized certifications, • Annual Team Bonus, • Ability to move up in new organization as we grow, • Ability to lead others while jumping in and getting the job done. Team Player/Coach, • Possess a Electricians certification from the State of California, • GENERATOR EXPERIENCE IS A PLUS BUT NOT REQUIRED WE WILL TRAIN., • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Willing to put the work in to advance career by showing up on time, leaving when work is complete and love what you are doing.

Job Description We are renowned for our commitment to innovation and excellence in the electrical field, specifically within the marina construction industry. We specialize in the design, manufacture, and installation of floating dock systems and other marina components and accessories. Our electrical team plays a crucial role in integrating efficient, safe, and durable electrical systems, ensuring optimal operation and safety for marinas worldwide. We are known for our advanced techniques, adherence to the highest standards of safety, and our collaborative, team-oriented approach. Our commitment to quality, safety, and innovation has positioned us as a leader in the industry. Summary: Our Journeyman Electricians are responsible for a range of duties, from interpreting plans and specifications to the hands-on installation and termination of electrical systems. As a representative of our team, punctuality and dependability are paramount. Ensuring safety and compliance with regulations is non-negotiable. In line with our commitment to safety and integrity, all employees will undergo random drug screenings, in adherence to our Drug-Free Workplace policy. There may also be occasional travel requirements to other sites within our divisional territory. Essential Duties and Responsibilities: • Reading and interpreting blueprints., • Significant experience pulling electrical wiring through conduits and terminating electrical panels., • Setting fixtures, outlets, and various electrical devices., • Connecting wires to circuit breakers, transformers, outlets, and other systems and components., • Skilled in installing, bending, and removing conduit., • Expertise in installing and replacing lighting fixtures/systems, and working with electrical panels, transformers, switches, and motors., • Proficiently use power tools for materials ranging from concrete to plastics., • Troubleshoot and test various electrical issues., • Install and troubleshoot kilowatt-hour meters., • Use test equipment such as meggar test, ammeter, voltmeter, etc., • Connect single and three-phase transformers with accurate voltage tap adjustments., • Lead electrical wiring installation in commercial spaces and troubleshoot installation malfunctions in preparation for inspections., • Installing and ensuring well-functioning lighting, alarms, and other electrical systems., • Install, test, and review diagrams of circuits, outlets, load centers, and panel boards., • Following state and local building codes during installations and inspections., • Setting up comprehensive electrical systems by installing fixtures and equipment., • Embedding safety and distribution components, like switches, resistors, and circuit-breaker panels., • Connecting wiring in electrical circuits and networks while ensuring component compatibility., • Preparing and connecting wiring through assembled conduits., • Daily consultation with Foremen and Supervisors on installation instructions and being self-sufficient., • Regularly inspecting retail spaces connected to new builds; this includes replacing old wiring, cleaning circuits, etc., • Troubleshooting effectively to pinpoint hazards or malfunctions and repairing or replacing damaged units., • Must hold a valid State Journeyman License., • Proven experience as an electrician in a commercial setting., • Familiarity with the current NEC code., • Consent to pre-employment background, drug screening, and have reliable transportation., • Provision of professional references., • Base Wage: $50.00 to $55.00/hour, based on experience., • Additional Payments: Potential for per diems or Prevailing Wage rates depending on work location., • Profit Sharing: Inclusion in the company's profit-sharing scheme., • Retirement Plan: 401k with employer 3% contribution.Our 401k includes a ROTH deferral option., • Healthcare: Comprehensive health care benefits.

Job Description Position Summary The Southern California Electrician is a licensed professional responsible for multi-site management of all low-voltage, structure cabling, electrical system installation, troubleshooting, repairs and maintenance for all H&S C-store retail sites and fueling locations spanning across Los Angeles, Orange County and San Diego. The Electrician will have excellent customer service capabilities, clear communication and reliably work independently in the field performing routine service calls and ensuring compliance with NEC, OSHA, and hazardous location standards. Strong regulatory compliance, inventory management, and technical documentation. Responsibilities and Duties: • Install, maintain, and repair electrical systems at retail C-store and fuel sites., • Pull wire, punch terminate cables, and splice according to code., • Diagnose, troubleshoot, and repair electrical issues with strong problem-solving skills., • Perform routine service calls and preventive maintenance to ensure uptime and safety., • Read and interpret electrical schematics, diagrams, and technical documents., • Support control systems and low-voltage wiring, including PLC systems., • Understand refrigeration cycles and related electrical systems., • Document all service and repair work with strong compliance practices., • Maintain professional communication with operations and site managers., • Travel daily across Southern California regions (80–100% travel). Driver & Compliance Records Management • Maintains organized and compliant driver qualification files. Education and Work Experience Required: • Active California (DIR) Certified Electrician C-10 Electrical License in good standing., • Must complete 32 hours of continuing education every 3 years., • Minimum 3 years of electrician experience (residential, industrial, and commercial)., • Multi-site commercial experience required; gas/oil C-store experience a plus. Preferred Qualifications: • Experience in the fuel or petroleum industry is highly desirable., • Knowledge of state and federal regulations., • At least 5 years’ experience with low-voltage, control systems, and PLC troubleshooting., • Demonstrated Class I Div II hazardous location experience., • Knowledge of NEC, OSHA, and compliance documentation standards., • Licensed, with advanced certifications; able to train others and enforce compliance., • Strong work ethic, passion for the electrical trade, and commitment to ongoing learning. Work Environment: • Ability to work independently, troubleshoot, and resolve issues in the field., • Owns hand tools and able to lift/carry heavy equipment., • Clean DMV record (minimum 2 years in good standing)., • Strong communication skills, professional appearance, and customer service orientation. Skill Set • High attention to detail and accuracy., • Ability to prioritize and manage multiple tasks effectively., • Strong organizational and record-keeping skills., • Excellent written and verbal communication. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successful perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this position, the incumbent is regularly required to talk or hear., • The employee frequently is required to use hands, fingers, handle or feel objects, tools and controls., • The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • The employee must occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus., • The noise level in the work environment is usually moderate and in an office setting. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. (Full-time) - 5 days/week - 8 Hour Shifts + On Call Location: Multi-site Travel: Servicing Los Angeles, Orange County, and San Diego Retail Locations

Job DescriptionSalary: $35-$70.00 PER HOUR NOW HIRING: Experienced Automotive Technicians Euro Car Doctor Costa Mesa & Irvine, CA (Brand-New, State-of-the-Art Shops) Were expanding FAST bays are filling up now! If youre an experienced technician whos tired of dealership politics, low warranty pay, or shops that dont value your skills, this is your chance to join a team that truly invests in YOU. At Euro Car Doctor, were proud to be the fastest-growing European automotive repair chain in Southern California. With a marketing budget bigger than the local dealers, your bay will always be busyguaranteed. What Youll Do • Diagnose & repair European, Asian, and American vehicles (BMW, Mercedes-Benz, Audi, VW, Porsche, Land Rover, Mini, etc.), • Flag hours efficiently & accurately, • Work alongside a supportive team of 5+ technicians and service advisors, • Contribute to a positive, drama-free shop culture What We Offer • $30 $70/hour (based on experience & certifications), • 20% Bonus on EVERY flagged labor hour, • Flat Rate + Guaranteed Hours never stress about slow weeks, • Expected 4045 billed hours/week, • No weekends enjoy your family time, • $1,000 referral bonus (paid after 60 days when your referral is hired), • Paid ASE training & certification support, • Dealer-level diagnostic tools (ISTA, AIR, VIDA, Xentry, etc.), • Full Benefits: 401(k) + match, health, dental, vision, life insurance, • Paid time off, parental leave, tuition reimbursement, employee discounts, • Relocation assistance (well even move your toolbox!), • Your first home buying assistance guarantee in 18 Months or less!! What Were Looking For • 3+ years of hands-on technician experience (Euro experience a plus, not required), • Strong diagnostic and repair skills, • Self-motivated, team-oriented, and drama-free, • Clean, valid drivers license Read our feature in Ratchet & Wrench Watch our Why Work With Us video Dont Miss Out Claim Your Bay Today! Were interviewingthis week and spots are going quickly. Call or text Tony Perez directly at 562-712-1413 to apply now!

Job Description Full job description Job Summary Horizon Lighting, an established lighting and electrical service company is looking for professional service/ lighting technicians to service properties in Orange County areas. All applicants must have a clean DMV record, great communication skills and a "Can Do Attitude". In exchange, we offer full time hours, company vehicle, a very competitive salary, a comprehensive benefits package ( including health insurance, paid vacation, and a 401K). If your looking for a great place to work with unlimited growth potential than your hunt for the perfect job ends here. Responsibilities and Duties Daily job duties and responsibilities vary by location but mainly consist of electrical troubleshooting, light fixture installation/repairs, new electrical circuits, breaker/panel repair, Switch Gear repair/Upgrades and lighting control repair/upgrades. All applicants must have the drive and mindset to grow professionally as well as personally. These individuals must be self starters that can manage service/bucket truck inventory, paperwork and time. Pay: $28.00 - $45.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off Powered by JazzHR F0hM8tnG3l

Job Description Duties: • Perform Mechanical Repairs using hand and power tools., • Document Maintenance and Repairs via e-mail at the end of the day., • Pick up parts and/or components at different locations using company transportation, • Drop off parts and/or components at different locations using company transportation, • Provide training to New mechanical Maintenance Technicians and/ or assistants., • Troubleshooting faulty machinery and diagnosing the root cause of the malfunction using diagnostic tools and problem solving abilities., • Collaborating with other mechanical maintenance technicians to solve complex mechanical issues and repairs., • High School Diploma or equivalent GED/HISET, • Computer skills to send emails, upload pictures, and general communications., • Minimum 5 Years of hands on Marine Mechanical experience, • Knowledge and experience with hand and power tools and their proper use., • Knowledge and experience with measuring tool and GD&T, • Interpersonal skills to interact with employees and/or clients in the field., • Attention to detail to ensure that all and each job or task is completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked., • Physical stamina to handle a full shift of being active and working either in the shop or in the field., • No motion sickness, • Must have valid US Passport, • Must have valid Driver's license, • Must know how to drive a forklift Our corporation has a Drug and alcohol free work environment, employees might be subject to drug and alcohol tests at management discretion. Veterans are encouraged to apply.

Job Description Overview Furniture Assembly Tech CA Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SPAR is seeking skilled assemblers to perform on-site service and furniture assembly in Office Supply Stores, as well as in-home assembly projects. Are you great with your hands? Do you enjoy assembling furniture and seeing the finished product of your work? If you have experience as an assembler, especially at Office Supply Stores, we want YOU on our team! Why You’ll Love This Job: • Great Pay: $16.75 - $18/hour for showroom service work, • Get Paid Fast: With DailyPay, you can work today and get paid tomorrow!, • Free enrollment required, • Consistent Work: Part-time, on-going projects servicing Office Supply Stores & customers in-home furniture assembly purchases, • Assembling Ready-to-Assemble (RTA) Furniture in retail showrooms and customer homes, • Ensuring displays are set up properly and well-maintained, • Following plan-o-grams and completing customized category resets, • Previous merchandising or commercial furniture assembly experience (Office Supply Stores experience is a plus!), • Ability to read instructions and assemble furniture efficiently, • Can lift up to 50 lbs. and stand for extended periods, • Reliable transportation (some travel may be required), • Your own basic tools (drills, screwdrivers, etc.) At SM&A, we provide essential services to top retailers and manufacturers across the U.S. Our work keeps retail moving forward, and we need talented individuals like YOU to help make it happen. Ready to build a career? Apply today! We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR’s employees to perform their job duties may result in discipline up to and including discharge.

Job Description SOUTH COAST FACILITY SERVICES is a full-service MEP contractor that designs & installs HVAC equipment, delivers Energy Services, and provides process piping & direct digital control systems. Our mission is to provide high quality mechanical, electrical and plumbing solutions through service and retro-fit construction; provide continuous education to our employees; lead the industry with innovation and technology. JOB SUMMARY: Emergency Power Technicians travel to customer sites (industrial & commercial) to inspect, test, troubleshoot, perform start-up and collect data of low voltage (60V to 600V) electrical systems. Technician shall complete automatic transfer switch servicing and troubleshooting along with low voltage switchgear and circuit breaker testing. Must have practical knowledge and experience in using electrical test equipment tocomplete assigned job tasks. Rotate emergency on-call duty and if called respond to customer emergencies in a timely manner. Perform all duties in accordance with the company’s policies and procedures, all US state and federal laws and regulations, wherein the company operates. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Implement procedures and tasks as provided by foreman, manager, director, or project manager., • Must be able to drive daily locally/regionally and be available for periodic overnight travel., • Complete assigned tasks in a safe and workmanlike manner., • Set and continually manage project expectations with team members and other senior management., • Comprehend and utilize software and applications used in field operations., • Be on the On-Call schedule on a rotating basis., • Must be available for occasional in and out of state jobs and training courses., • Complete and deliver reports, proposals, and required documentation., • Regular attendance and timeliness., • Familiar with the Electrical industry standards and codes, • Prior experience in the installation and maintenance of electrical equipment and supporting structures., • Demonstrative ability to translate and understand simple and complex electrical drawings and schematics., • Knowledge of ATS, Switchgear, UPS, GFCI, and other critical/emergency power system equipment., • Must be familiar with electrical test equipment such as multimeters, IR Cams, load monitors, etc., • Experience utilizing power tools (saws, crimpers, drills, etc.) safely on construction and operational work sites., • Experience working both independently and in a team-oriented, collaborative environment is essential., • Can conform to shifting priorities, demands and timelines through analytical and problem-solving capabilities., • Must have good PC skills including email, internet, data entry and Microsoft Excel; experience with various electrical system programs a plus., • Must have a valid driver's license, and currently have and be able to maintain a good driving record., • Must be willing to work flexible hours and overtime, and occasional weekends, holidays, and nights., • Must be able to work safely and adhere to all electrical safety procedures., • Prefer OSHA 10 hour, MSHA, NFPA 70-E, CPR/First Aid/BBP/AED training., • Prefer an Associate's degree from an accredited 2 year technical college in Electrical Power & Controls (EPC), an EE Degree from an ABET accredited college, or similar experience and training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee)., • High school diploma or equivalent experience required., • 3-5 years commercial Field Technician experience within the electrical industry or similar., • Manufacture ATS, PLC, UPS, and other equipment certifications a plus. Seniority Level Associate * Industry • Electric Power Transmission, Control, and Distribution, • Electric Power Generation, • Construction Employment Type Full-time * Job Functions • Consulting Skills • Test Equipment, • Emergency Power, • Switchgear, • Microsoft Excel, • Training, • Field Operations, • Electrical Safety, • Electric Power, • Troubleshooting, • Industry Company DescriptionSOUTH COAST FACILITY SERVICES is a full-service MEP contractor that designs & installs HVAC equipment, delivers Energy Services, and provides process piping & direct digital control systems. Our mission is to provide high quality mechanical, electrical and plumbing solutions through service and retro-fit construction; provide continuous education to our employees; lead the industry with innovation and technology.SOUTH COAST FACILITY SERVICES is a full-service MEP contractor that designs & installs HVAC equipment, delivers Energy Services, and provides process piping & direct digital control systems. Our mission is to provide high quality mechanical, electrical and plumbing solutions through service and retro-fit construction; provide continuous education to our employees; lead the industry with innovation and technology.

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Assemblers will be expected to perform numerous assembly and fabrication duties involving advanced composites such as Carbon Fiber, Kevlar, and complex adhesive systems. Because of the nature of spacecraft, and military hardware, all technicians must exhibit a high degree of discipline and work ethic. Assembly Technicians must have expansive experience with Aerospace composite assembly and fabrication and must be willing and able to perform a wide range of fabrication duties with a high degree of craftsmanship. Senior technicians are also expected to be innovative, versatile, and provide both leadership and training to junior technicians. Responsibilities: • Assemble aircraft components and subassemblies according to manufacturing plans, drawings, specifications, and instructions, • Attach mechanical fasteners and other hardware onto components or subassemblies using rivets, screws, adhesives, or other fasteners, • Prepare surfaces for bonding by light sanding, • Perform masking operations on composite and metallic components, and subassemblies, for priming operations, • Perform edge and core filling operations as required for final assemblies, • Identify parts (part marking) as required by customer specifications, • Ensure that the materials used in fabrication meet the required specification and shelf-life requirements, • Clean fabricated parts when required, as required, during fabrication operationsRequirements:, • High School Diploma or Equivalent, • Ability to operate in a fast-paced environment and contribute immediately upon hire, • Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee), • Composite experience gained within an aviation manufacturing or aerospace company, • High volume manufacturing experience is a plus, • Must have a high level of technical skills to perform job duties, • Must be able to read blueprints and manufacturing instructions, • Must have operational knowledge of basic measurement tools: scales & calipers We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Summary Terran Orbital is seeking an experienced AIT Technician – EPS Module Assembly to join our dynamic team. Reporting to the Production Manager the AIT Technician – EPS Module Assembly will responsible for assembling and testing Electrical Power System (EPS) spacecraft components. The ideal candidate should possess a keen understanding of quality control and AS-9100 standards. This role is on our Weekday shift (Monday-Thursday) from 6:00AM - 4:30PM Key Duties and Responsibilities • Follow detailed procedures to assemble complex electronic and mechanical modules., • Operate hand tools such as screwdrivers, torque wrenches, and light power tools., • Ability to quickly change priority while working in a fast-paced environment., • Communicate statuses, issues, and suggestions effectively to the support engineering team., • Updating documentation and hardware statuses through online services., • Basic avionics and the electrical troubleshooting., • Assist in spacecraft integration related activities., • Must possess a strong work ethic, be able to work with limited supervision, and meet the requirements of the attendance policy., • Must perform all functions of the job in a safe and professional manner., • Must keep work area(s) in a neat, clean, safe, and orderly condition., • Ability to stand for most of the working day., • Perform miscellaneous lab duties, including kitting, inventory, and organization tasks., • High school diploma or GED, • 2+ years of professional experience working hands-on as a technician within electromechanical assembly or spacecraft/spacecraft hardware manufacturing, • Ability to read, understand and follow detailed work instructions for assembly and testing flight product including blueprints and schematic drawings, • Proficiency with Windows 10, Microsoft Office products, and internet browser applications, • Good written and verbal communication skills, • Knowledge of soldering tools and practices (J-STD-001 certification preferred but not required), • Ability to maintain a clean and organized workspace, • Familiarity with cleanroom cleanliness standards and ESD precautions, • Must have excellent visual acuity to perform detailed inspections and quality control tasks, • Ability to accurately distinguish a wide range of colors, which is essential for success in this role, • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job DescriptionDescription: Retina Associates of Orange County is a retina group of renowned board-certified Ophthalmologists who are fellowship-trained in vitreoretinal surgery and specialize in diseases of the retina, macula and vitreous. Our doctors have a remarkable history that combines teaching at prestigious academic institutions in concert with excellence in patient care in the private practice setting. We are located in Laguna Hills, Newport Beach, and Santa Ana, serving in the southern part of Orange County. We are looking for a team oriented person with a strong work ethic and good people skills. The Ideal candidate will have a background in ophthalmic technology and experience in patient care and work-up. Position includes pretesting, use of EHR/EMR, assisting in minor procedures. Skills with OCT and other ophthalmic imaging devices a plus. Excellent pay with great benefits! Requirements: Skills required: • Ability to complete thorough medical histories? in a EMR system, • Ability to measure accurate Visual Acuity and IOP, • Ability to use an OCT machine, • Knows how to use Electronic Medical Records system, • Visual Field assessments?, • Terminology and uses of ophthalmic medications?, • Ability to interact with patients?, • Required: High School Diploma/GED or equivalent., • Excellent verbal and written communication skills, • Strong organization skills and attention to detail, • Ability to multi-task and work in a fast pace environment, • Excellent patient service skills, • Ability to work as a team

Job DescriptionDescription: JOB SUMMARY Under the direct supervision of the Service Manager, the Field Service Technician is responsible for performing periodic maintenance, repair, replacement, and limited troubleshooting on various models of forklifts and competitive material handling equipment. This position will interface with customers daily and continuously establish and maintain lifetime relationships by listening to customers and satisfying their equipment service needs. Requirements: DUTIES AND RESPONSIBILITIES • Troubleshoot, diagnose, and repair all makes of lift trucks and components., • Perform all assigned Planned Maintenance (PM) on customer lift trucks., • Perform proper PM’s and engine tune-ups on most makes of equipment without supervision in a timely manner., • Operate service van in a clean, safe, and secure manner following all required safety rules for the job., • Assist with training/mentoring apprentice mechanics through on-the-job training., • Follow all safety procedures in performing work as well as company policies., • Always demonstrate exceptional customer service skills by interfacing with clients in a professional manner., • Properly identify and order all necessary replacement parts., • Test lift equipment to ensure repairs were completed correctly., • Ensure batteries for electric forklift trucks are fully charged., • Inspect lift equipment to ensure that it is working properly and safely., • Use TW Mobile application to process service calls by entering service order details in a timely manner. Ensure all work order details are accurate, such as work description, time tracking hours, tech notes, tech recommendations, service images, service checklist, and required parts., • Excellent mechanical repair skills., • Excellent analytical and problem-solving skills., • Ability to visually diagnose mechanical issues., • Proficient with computer diagnostic equipment and software., • Ability to read service and repair manuals., • Ability to perform repairs in a timely fashion., • Ability to read work orders., • Able to read and understand electrical and hydraulic system schematics., • Able to repair, or replace major system components, including circuit boards and other electrical parts, hydraulic, mechanical, L.P. systems, power steering and transmissions, engines with limited supervision., • Excellent verbal and written communication skills., • Ability to work at a fast pace and under pressure., • Ability to multitask and work independently., • Advanced customer service skills., • High school diploma or equivalent., • 3 to 5 years prior mechanical experience in lift truck repair, automotive, large equipment or related industry or related trade school education. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms., • Must be able to work safely in a noisy area with many odors present., • Ability to regularly lift 50 pounds and occasionally lift up to 100 pounds., • Must be able to inspect equipment to determine repairs needed., • Good vision to inspect repair work., • Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionAirstream Orange County is looking for some dynamic RV service technicians who want to work in a growing industry on some of the most iconic trailers in America. Skills in plumbing, carpentry, and aluminum fabrication are definite benefits and skills used throughout the RV industry. RVIA certification is recommended but not required. A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs. Camping World will pay to certify individuals not already certified. Plumbing-Carpentry-HVAC-Electrical-Mechanical-RV Service. A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs. The compensation range for this position is $50,000 to $78,000. This position has variable compensation in addition to the range provided Full-time associates are offered a comprehensive benefits package including medical, dental, vision, PTO, 401k, and more! Essential Job Functions: • Provide and document complete diagnostic tests and repair or replacement services to customers, • Perform electrical, plumbing, carpentry, and appliance maintenance, • Track all parts and materials used in repairs or replacements, • Keep supervisor appraised of work progress, • Ensure that the final work product meets quality standards and is inspected by the supervisor or designee, • Maintain a safe and clean work area for customers and coworkers Essential Job Skills:, • Certification from college or technical school in trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Minimum of 1-year service technician experience or related fields preferred RVIA certification helpful but not required, • RVIA certification helpful but not required •, • May lift up to 25 lbs and/or move up to 50 lbs. with assistive devices, • Prolonged periods of standing, stooping, crawling, and bending, • Exposure to heights and hazards related to working with electrical and welding equipment, • Environmental conditions include heat, cold, humidity, noise, dust, and wetnessQualifications, • Someone who is passionate about fixing mechanical, plumbing, HVAC, electrical, and maintenance problems would be ideal, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Certification from college or technical school in a trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Valid driver's license, • May lift up to 25 lbs and/or move up to 50 lbsJob-Specific Expectations, • Make 100 % productivity the goal and keep as close to that as possible., • Use factory specifications as the standard in all repair, service, and customization work., • Provide excellent customer service for all external and internal customers, specifically offering dependable vehicle service., • Receive service assignments from the service writer or service manager., • Have the repair work finished within the allotted time. Set goals, develop skills, and constantly increase efficiency skill level., • Submit your requested parts as soon as it is determined what is required for a particular job., • Keep the service writer or service manager informed of any additional work that may be required or of any delays to the estimated completion time as you make those determinations so the customer can receive up-to-date information., • Aid service writer as needed to write work orders, conduct test rides, interact with the customer, or in any other way you are able to guarantee customer satisfaction., • Maintain a clean, efficient work area and assist in keeping the shop neat and organized., • Make sure the proper paperwork is completed and filed after every job completion., • Keep your technical qualifications current by finishing any required training programs., • Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off., • Make each job thorough and complete to reduce return repairs. If the vehicle should be returned for additional work complete it quickly, correctly, and cheerfully.

Job Description🛠️ Medical Device Assembler – 1st Shift Location: Irvine, California Type: Contract to Hire Shift: Monday–Friday, Start times between 4:00 AM–6:30 AM 🚀 Join a Fast-Growing Team Be part of a company on the brink of FDA approval for a breakthrough medical product. This is your chance to grow with a team that values precision, innovation, and career advancement. 🔍 What You’ll Do • Operate machinery to produce high-quality medical devices, • Inspect products using microscopes, • Prepare items for packing and sterilization, • Mix polymers and spray coating formulations, • Coat, inspect, and fold balloon catheters, • Maintain GMP compliance and cleanroom standards, • Package sterile and non-sterile goods, • Replenish supplies and build components for work orders, • Complete daily cleaning tasks🧠 What You Bring, • 1+ year experience in medical device manufacturing, • Comfortable working with chemicals and microscopes, • Able to stand for the entire shift, • Medium-level English proficiency, • High school diploma or equivalent, • Familiarity with cleanroom gowning/de-gowning, • Willingness to work overtime and weekends🧪 Work Environment, • Cleanroom setting, • Two 30-minute breaks (one paid, one unpaid), • Hands-on work with precision tools and chemicals Medical Device Assembler 1ST Job Type & Location This is a Contract to Hire position based out of Irvine, CA. Pay and Benefits The pay range for this position is $22.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Irvine,CA. Application Deadline This position is anticipated to close on Nov 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Are you a seasoned pest control professional with a passion for leadership? If so, join our team at Innovative Pest Solutions, where we are seeking a full-time Clean-Out Services Team - Branch 2 Lead Technician to join our team servicing the Los Angeles, Orange, and Riverside Counties. This is your chance to lead, mentor, and excel in a company that values expertise and teamwork. A GLIMPSE INTO YOUR DAY: As our Clean-Out Services Team - Branch 2 Lead Technician, you'll serve as the lead technician for a two-person cleanout services crew, working hands-on to perform pest control services while also supervising and training a junior technician. You'll ensure every job is completed with the highest standards of quality and efficiency, strictly adhering to Integrated Pest Management (IPM) principles and regulatory requirements. To Qualify, You'll Need: • Valid Branch 2 Field Representative license, • Valid Class C driver's license, • 5+ years of licensed driving experience with a clean driving record, • Strong Integrated Pest Management (IPM) experience, • Highly organized, detail-oriented, and stringent in managing regimented, document-heavy programs, • Sharp eye for detail and a commitment to quality, • Strong leadership and communication skills, • Willing to follow detailed protocols and maintain the highest standards of precision, • Ability to train and mentor others effectively WHY WE ARE A GREAT PLACE TO WORK: • Pay: $75,000 – $100,000 (based on performance and experience), • Schedule: Full-time, Monday - Friday schedule, • Perks: Our comprehensive package includes Medical, Dental, Vision, and 401(k), as well as dedicated career growth opportunities within a supportive team environment. COME THRIVE WITH US! Innovative Pest Solutions, established in 1994, stands as a pioneering force in integrated pest management. We offer a wide range of services, including solutions for birds, bed bugs, heat treatment, rodents, termites, and weeds. Each of our specialized departments develops tailored plans, showcasing our dedication to superior pest management. Even as we expand, we foster a close-knit environment and prioritize the well-being of our employees. Become a part of our team today and contribute to keeping our community safe and healthy! Apply now! Just fill out the initial 3-minute, mobile-friendly application to become our next Clean-Out Services Team - Branch 2 Lead Technician. Job Posted by ApplicantPro

Job Description Overview: The Lead Security Technician plays a pivotal role in the installation of security systems, ensuring projects meet Premise One's quality standards and customer satisfaction. This position requires proficiency in Card Access, CCTV, and Intrusion Detection systems, along with strong communication and leadership skills. PLEASE NOTE: THIS IS A CLIENT SPECIFIC POSITION THAT REQUIRES OFF-SHIFT WORK, TYPICALLY 12:30AM – 7:30AM, MONDAY – FRIDAY. CANDIDATES MUST BE FLEXIBLE IN ADJUSTING WORKING HOURS, AS NEEDED. Responsibilities: • Installation & Direction:, • Execute project installations as directed by the Project Manager., • Follow project drawings and manufacturer specifications for all installations., • Team Collaboration:, • Communicate professionally with field staff and customers., • Collaborate effectively with the Project Manager, Field Technicians, and other team members., • Safety Compliance:, • Adhere to company safety guidelines and requirements consistently., • Technical Expertise:, • Troubleshoot and resolve technical issues as they arise., • Demonstrate a thorough understanding of security technology and installation processes., • Representation:, • Act as the primary on-site contact for clients, representing Premise One professionally., • Attend site meetings, as required and provide updates on project progress., • Training & Development:, • Proficient in installing Card Access, CCTV, and Intrusion Detection systems., • Self-motivated, positive attitude, and professionalism in all interactions., • Ability to work at heights, in confined spaces, and lift up to 50 pounds., • Willingness to travel at least 60% of the time within the designated work location or regional territory., • Experience with Lenel, Software House, Axis, or Avigilon systems is a plus., • Availability to work off shift work, overtime, weekends, and out-of-town assignments, as needed., • Ability to handle physical workloads effectively. Qualifications: • Minimum 2 years of relevant experience in AV, Security, Access Control, or Infrastructure Cabling., • Proven experience in leading project teams and reporting to a Foreman/Project Manager., • Must possess basic hand tools necessary for project completion., • Strong mechanical aptitude and troubleshooting capabilities. Interaction with Others: Must be able to follow Company policies; receive directions from others; work effectively with co-workers in a constructive and positive manner; listen to and objectively consider ideas and suggestions for improvement; keep others informed of work progress, deadlines, or other pertinent issues; address problems constructively to find acceptable solutions; keep commitments; and always respect the diversity of the Company's work force in actions, words and deeds. Experience: Three to Five years related experience and/or training required. Language Skills: Ability to read and interpret documents, write correspondence, and communicate effectively with others and third parties, preferably, and sometimes exclusively, in English. Mathematical Skills: Competent ability to add, subtract, multiply and divide using whole numbers, common fractions, and decimals. Competent ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Competent ability to define problems, collect data, establish facts, and draw valid conclusions in situations where only limited standardizations exists. Certificates, Licenses, Registrations: Driving is a requirement for this position therefore A valid driver's license is required. The employee's motor vehicle record will be subject to the policies and provisions contained in the company's Fleet Safety Program. First-Aid and CPR Certification a plus Manufacturer Certifications a plus Industry Certifications a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, squat or crawl; identify (colored) wires by sight; talk or hear; and use a ladder and possibly a scaffold, or A-frame. The employee frequently is required to sit. The employee must occasionally lift and/or move up to 25 pounds, and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. It is required to Look at computer monitors for long periods of time. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is sometimes loud. Safety: This position is deemed safety-sensitive and drug-free. Anyone considered for this position must adhere to the company’s safety policies, manuals, and other documents, including safety-related materials promulgated or required under applicable federal or state law. Powered by JazzHR BLU4MwgNhH

Job Description Medical Device Assembler Medical Device Assembler – 2nd Shift 📍 Irvine, CA | Contract-to-Hire | Cleanroom Shif OT & Saturdays as needed Responsibilities: • Follow detailed assembly instructions & quality system requirements, • Report issues with quality, processes, or equipment, • Train coworkers as needed, • Maintain clean, organized work area, • HS diploma or equivalent, • 6+ months high-volume small-part assembly experience, • Skilled with hand tools, calipers, micrometers, • Great benefits upon permanent hire, • Supportive, growing company culture, • Catered lunch weekly This is a Contract to Hire position based out of Irvine, CA. Pay and Benefits The pay range for this position is $21.00 - $22.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Irvine,CA. Application Deadline This position is anticipated to close on Nov 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description As a Cable Technician for L.A. Hydro Jet & Rooter Services in the Orange County, CA area. You will be responsible for assembling, installing, and repairing pipes, fittings, and fixtures of water and drainage sewage systems. WHAT SETS L.A. HYDRO-JET APART: • Competitive hourly wages and benefits package., • Dispatched from home daily. Company vehicle provided, • Career growth opportunities., • Clears blocked plumbing lines in commercial and residential buildings., • Provide drain cleaning services for grease lines, urinals, difficult access lines, back-to-back lines, damaged lines, ejector pumps, and sump pumps., • Repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains., • Cuts openings in walls and floors to accommodate pipe and pipe fittings., • 2 years of service and repair plumbing experience REQUIRED (residential or commercial)., • Basic mechanical knowledge needed., • Available During Training on Wednesdays for instruction in Sun Valley office, • Available After Training on Wednesdays for check in Sun Valley office, • Is consistently at work and on time.

Job Description 2nd shift Medical Device Assembler Responsibilities • Understand and follow detailed assembly instructions, processes, and procedures., • Comply with policies, guidelines, and regulatory requirements per the Quality System., • Report problems with quality, processes, equipment, and materials to the Project Engineer/Supervisor., • Provide hands-on job function training to coworkers as needed., • Maintain a clean and organized work area to facilitate manufacturing functions., • Perform other duties as assigned., • All candidates MUST be open to OT during the weekdays and open to working Saturdays when needed., • Proficiency with measuring tools, hand tools, calipers, and micrometers., • Experience in medical device assembly and cleanroom environments., • Mechanical and electrical assembly skills., • High School Diploma or equivalent. Our organization offers great benefits upon permanent hire, a growing company culture, and a supportive work environment. We are committed to making a difference in healthcare with devices that help remove blood clots. Enjoy catered lunches once a week as part of our team. Work Environment This position operates within a manufacturing cleanroom environment, requiring adherence to strict hygiene and safety standards. Employees will work in close stations, using microscopes for up to 90% of their shift. The shift starts at either 3:30 pm or 3:45 pm, with the flexibility to begin an hour earlier if needed. Job Type & Location This is a Contract to Hire position based out of Irvine, California. Job Type & Location This is a Contract to Hire position based out of Irvine, CA. Pay and Benefits The pay range for this position is $21.00 - $22.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Irvine,CA. Application Deadline This position is anticipated to close on Nov 25, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: Commission We are Elite Rooter Plumbing - a residential service and repair plumbing company who are experts in drains & sewers. We are committed to maintaining the highest standards of excellence and innovation. We take pride in being a customer experienced focused plumbing company. We are currently seeking experienced Service Technicians to join our team. Our Technicians have the opportunity to diagnose plumbing problems, determine the best course of action for repair, write estimates, and perform the necessary repairs/installations. Success in this role comes from a customer service mindset. We are hiring for an immediate, full-time employment. We have calls. Responsibilities: Dispatch to jobs, provide estimates, sell plumbing jobs, write out invoices and collect payment from the customer. Diagnose, repair, and maintain various plumbing systems, including water, sewer, and drainage lines. Knowledge of Service Titan software is an advantage Maintain accurate record keeping regarding work performed Able to diagnose and explain plumbing issues with customers and address the problem. Benefits: No On-call schedule. 7:30am to 5:00pm Monday thru Friday. Saturdays are half a day. No Sundays Dispatched from home Helpers help on jobs Company Uniforms & iPad, gas cards, company credit cards, company vehicle Hiring Immediately: Please forward your resume to

Job Description SUMMARY Perform welding and fitting of the product to meet or exceed the Customer and Quality requirements. Manage time, equipment, and resources with guidance from the Weld Shop Supervisor. The Welder Fitter must be able to explain the respective role within the QMS and how their role contributes to quality. The Welder Fitter shall contribute to product conformity as apart to their daily job function and shall contribute to product safety The Fabrication Welder shall also be aware of ethical behavior and conduct themselves accordingly to Karman policies and procedures. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES · Maintain and Realize AS 9100 procedures and continuous improvement efforts. · Maintain a clean and organized work environment. · Schedule time and equipment in support of current work assignment. · Provide training and methods of fitting and welding as required by the Weld Shop Supervisor. · Develop shop aids and weld fixtures to assist in daily requirements. · Notify Weld Shop Supervisor when equipment is in need of repair. · Report to Weld Shop Supervisor improvements and recommendations that effect quality and / or schedule. · Must understand how customer products are impacted in the event of failure. · Any other duties as assigned. KNOWLEDGE AND SKILL REQUIREMENTS: · Must be detail oriented, extremely organized, posses excellent communication skills. · Must have excellent blue print interpretation skills. · Must be able to use inspection hand tools. · Must be able to fit both simple and complex assemblies. · Must have direct communication with internal customers. · Must be trained of applicable changes & customer requirements. · Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION & EXPERIENCE · High School Graduation or equivalent. · Adequate years of welding experience determined by Karman. (MIG, TIG, FLUX CORE) · Must have a thorough understanding of weld procedures and specifications. · Must have a thorough understanding of weld machines, preps / set-ups and practices. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description Pacific Office Automation is one of the largest independently-owned document imaging and technology dealers in the nation. Since 1976, we have grown to over thirty branches located in ten western states OR, WA, CA, AZ, NM, NV, UT, ID, CO, & TX. With over 40 years of success in office equipment and technology sales/service, our growth and reputation have afforded us great relationships with top manufacturers such as Canon, Sharp, Konica Minolta, HP, Ricoh, Lexmark, and many more. At Pacific Office Automation, you’ll find an amazing technology company full of growth opportunities, great benefits, and passionate coworkers who aim to help you succeed. Among our company goals, we aim to be a long-term employer. That means providing employees with the training and certification they need to keep up with the fast-changing technology of our office machines, devices, and software. At POA, we believe that all voices can and should be heard, regardless of seniority or tenure. Position Pacific Office Automation is currently seeking a Production Printer Technician who is skilled in repairing and maintaining Konica Minolta Production Printers for our office in Orange, CA. If you are a self-driven, service expert who is detail-oriented and capable of multitasking, we want to talk to you! Essential Job Duties • Responsible for a full range of repairs and service procedures on high-speed digital copiers/printers, full-color copiers/printers, and facsimiles, • Diagnostics, installation, troubleshooting, machine modifications, software upgrades, removal, and retrofits on a wide range of production machines., • Must have experience with servicing and repairing Konica Minolta production level, • Applicants with any advanced Konica Minolta certifications are required, • Strong computer knowledge, • Minimum of 2 years of experience operating large format printers, preferably in a professional printing environment, • Providing high-quality technical support and expertise by complete each service call according to service agreements and requirements, • Effectively complete all territory assignments and developing options to resolve unexpected problems, • Participates in training to remain up to date with new products and procedures., • Provide specialist service to other field service technicians for unresolved technical problems/issues, • Provide technician support to our sales team members to effectively maximize equipment leads and upgrade opportunities, • Working in a fast-paced environment Qualifications • 2-6 years minimum of relevant experience, • Must have experience with servicing and repairing production level office equipment such as copiers, printers, fax machines, mailing machines, etc., • Production Print certifications are highly preferred, • Strong computer knowledge, • Excellent customer service communication skills are essential, • Strong problem-solving and mechanical/electrical skills, • Strong working knowledge of Windows 10 applications, • Highly motivated and capable of working independently in the field, • Must possess a valid driver’s license with a clean driving record. A company car will be provided Benefits • $22 -$34 an hour DOE, • Advancement and growth into leadership roles, • Team-player environment, • Medical/Dental/Vision/Life insurance plans, • Matched 401k, • PTO, Vacation, Sick Leave, • FSA/HSA programs, • Company car for work and personal use Our Commitment to Diversity and Inclusion Pacific Office Automation is proud to be an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, gender, sexual orientation, gender expression or identity, age, religion, veteran status, or any other characteristic protected by law. We celebrate our employees’ differences because we know that diversity makes us stronger. #LI-Onsite #INDSP

Job DescriptionFire Alarm Foreman Fire Alarm Foreman Position Overview We are seeking an experienced Fire Alarm Foreman to oversee the installation, maintenance, and repair of fire alarm systems in healthcare facilities. The ideal candidate will have a strong background in fire alarm systems and management, ensuring compliance with safety codes and standards. Key Responsibilities • Lead and supervise a team of fire alarm technicians in the installation and maintenance of fire alarm systems., • Coordinate with facility management to ensure all fire alarm systems meet regulatory requirements and safety standards., • Conduct regular inspections and testing of fire alarm systems to ensure functionality and reliability., • Troubleshoot and resolve any issues related to fire alarm systems in a timely manner., • Maintain accurate records of work performed and materials used, ensuring all documentation is complete and up to date., • Proven experience as a Fire Alarm Foreman or similar role in the fire protection industry, particularly in healthcare settings., • Strong knowledge of fire alarm systems, codes, and standards, including NICET certification and NFPA regulations., • Valid fire alarm license and relevant certifications from recognized bodies such as the National Fire Protection Association (NFPA)., • Excellent leadership and communication skills, with the ability to manage a team effectively., • Experience with various fire alarm brands and systems, including Notifier, Silent Knight, Siemens, Honeywell, and others., • Company vehicle, • Company gas card, • Company cell phone and laptop, • Medical insurance, • Dental insurance, • Life insurance, • 401k Plan, • Paid holidays, • Paid Time Off, • Company events • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 11/12/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionFull Job Description Are you ready to step into a leadership role with a fast-growing company in the fire safety industry? The company in Tustin, CA is hiring a full-time Lead Service Technician * Dental, vision, and health insurance * 401(k) with company match * Bonus structure * Company phone and vehicle * PTO * Uniforms Not to mention, great perks like a take-home vehicle, support earning licenses, and opportunities for advancement. This role is as rewarding as it is challenging. If you're results-driven, team-oriented, and looking for a company that values hard work, we want you on our team! WHAT ARE WE ALL ABOUT? At our company, we specialize in providing reliable, cutting-edge fire safety solutions across Southern California. Our team is results-driven, team-oriented, and transparent, creating an environment where dedication and excellence are celebrated. We care deeply about our people-sharing profits, offering growth opportunities, and fostering a supportive atmosphere. With perfect retention for employees who stay beyond their first year, we're more than just a workplace; we're a family committed to success and innovation. We hope you'll join us! WHAT YOUR DAY TYPICALLY LOOKS LIKE As a Lead Fire Alarm Technician, your day starts from home, as you dispatch directly to job sites across Orange County, Riverside County, San Diego County, and Los Angeles County. Once on-site, you lead a team to install, maintain, and repair low-voltage systems, including alarm systems. Inspections, troubleshooting, and keeping accurate records are all part of the job. Whether bending conduit, reading blueprints, or programming fire alarm panels, you play a critical role in delivering top-tier service to our clients. Expect to work with a team that values precision, communication, and efficiency. WHAT WE NEED FROM YOU * 5+ years of fire alarm field experience * Proven ability to lead a crew * Experience with conduit bending and blueprint reading * Good driving record * Reliable vehicle for 20-mile commutes Preferred Qualifications: * Fire alarm panel programming experience * Strong mechanical aptitude and problem-solving skills WORK SCHEDULE & LOCATION This is a full-time position with shifts starting between 4 and 6 AM and running from 7 AM to 4 PM, Monday to Friday. Overtime opportunities are available. Travel daily to job sites across Orange County, Riverside County, San Diego County, and Los Angeles County-no central reporting is required. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description CNC Lathe Machinist Job Description A dynamic machine shop specializing in custom gears, machined parts, and assembly for various industries including aerospace, defense, medical, commercial oil, power, and automotive is looking for a skilled setup machinist in Anaheim, CA. Responsibilities • Read blueprints and verify part dimensions using appropriate measuring instruments., • Accurately utilize measuring tools and follow necessary company procedures relevant to the position., • Perform in-process inspection of machined parts to ensure quality standards., • Collaborate with the Supervisor and Quality Department to ensure parts meet customer specifications., • Proficiency in operating CNC lathes, particularly Okuma's models LT300MY, LB3000, and L250., • Experience with blueprint reading and setup operations., • Previous experience with aerospace parts and inspection tools/methods with tolerances up to .0005''., • Experience with Mastercam is a plus., • Must have held a similar job within the last 3-4 years. Enjoy excellent benefits, including medical, dental, and life insurance, 4% 401(k) matching, paid time off, and holiday pay. Join a supportive work environment that values your skills and offers opportunities for growth. Work Environment Work in a clean and air-conditioned machine shop with approximately 50 employees. The schedule is Monday through Thursday, 2 pm to 12:30 am, following a 4/10 work schedule. Job Type & Location This is a Contract to Hire position based out of Anaheim, California. Job Type & Location This is a Contract to Hire position based out of Anaheim, CA. Pay and Benefits The pay range for this position is $18.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anaheim,CA. Application Deadline This position is anticipated to close on Nov 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJoin On-Site Health & Safety: Your Next Adventure in Occupational Health & Safety Starts Here! Are you an EMT, Paramedic, LVN, or medical professional looking to break free from the traditional clinic or hospital setting? Do you crave a dynamic role where every day brings new challenges and opportunities for growth? On-Site Health & Safety invites you to become a Health & Safety Incident Response Technician (Field Technician) and redefine what's possible in your career! Direct Link to all Open Positions at On-Site Health & Safety: oshshiring.com Benefits: • Work an alternative work week, 4 days/10-hour shifts, • On-Call rotation of some overnight and weekend shifts required, • On-Call Stipend $45/night and $150/weekend, • $20/hour, • Company Vehicle to Take Home, • Paid Training, • Comprehensive Medical Benefits with a wide range of choices, • 401k Retirement PlanWhy On-Site Health & Safety?, • Beyond the Ordinary: Our Field Technicians gain diverse skills, responding to various worksites from construction to refineries in a company vehicle, making a real impact., • Work-Life Balance Redefined: Eliminate your commute with "clocking in and out" from home. We offer a 4-day/10-hour work week, plus full-time, part-time, and flexible (PRN) options., • Opportunity Awaits: Since 1996, On-Site Health & Safety has expanded from California to 20+ states. Our mission: "We keep America working by being On-Site." Join us for career advancement and transfer flexibility., • Impactful Work: You'll ensure health and safety compliance, provide first aid and incident reports, perform health screenings, and draw blood when certified.Are You Ready to Join Our Team?We're seeking dedicated professionals with education or experience in:, • EMT, AEMT, Paramedic, Military Medic, or equivalent, • Licensed Vocational Nurse/Licensed Practical Nurse, • Or with additional in-house training: Emergency Medical Responder, X-Ray Technician, Phlebotomist, Medical Assistant, Certified Nursing AssistantMinimum Qualifications:, • At least 18 years of age, • Must be insurable by our motor vehicle insurance policy (minimum 3 years driving history or documented defensive driving training; no severe driving record "hits"), • Pass a criminal background check (as permitted by law), • Pass a pre-employment drug screen and maintain compliance with drug testing policy requirements.Additional Notes:, • Field Technicians must be excellent communicators, comfortable with public speaking, and able to articulate instructions clearly., • You should be comfortable standing, walking, sitting, and climbing stairs for extended periods., • Willingness to operate a motor vehicle for extended periods and long distances is essential. Ready to maximize your starting pay? Apply for the highest position you qualify for! Direct Link to all Open Positions at On-Site Health & Safety: oshshiring.com Direct Link to all Field Technician job descriptions: Join On-Site Health & Safety and be part of a team that truly keeps America working! Disclaimers: **On-Site Health & Safety conducts an extensive background check, which includes a motor vehicle driver’s license check. The insurance company and internal safety department review MVR records to determine if an applicant will be extended fleet driving privileges based on several risk factors, including previous negative “hits” on an MVR check, such as excessive moving violations, DUIs, reckless driving, etc. The search also considers a driver’s driving age/history. Applicants must meet the minimum requirements above to apply. On-Site Health & Safety offers of employment are contingent upon the successful outcome of a pre-employment background check and drug screen. ***Due to the nature of On-Site Health & Safety services, employees may have access to federally funded or owned job sites/projects. As a result, all new hires and existing employees are subject to drug testing in a manner consistent with a federally compliant test. The test may include all substances that can be found in Department of Transportation-regulated tests. The timing of testing includes pre-employment, reasonable suspicion/reasonable cause, and return to duty. ***Some employees may be classified as having safety-sensitive positions. These positions are identified as Field Personnel, including Technicians, Supervisors, Managers, Field Training Specialists, and any variation of those positions. These positions are also subject to post-accident and random testing. Due to the possible exposure to bloodborne pathogens or bodily fluids, immunization against hepatitis B is recommended.

Job DescriptionJoin On-Site Health & Safety: Your Next Adventure in Occupational Health & Safety Starts Here! Are you an EMT, Paramedic, LVN, or medical professional looking to break free from the traditional clinic or hospital setting? Do you crave a dynamic role where every day brings new challenges and opportunities for growth? On-Site Health & Safety invites you to become a Health & Safety Incident Response Technician (Field Technician) and redefine what's possible in your career! Direct Link to all Open Positions at On-Site Health & Safety: oshshiring.com Benefits: • Work an alternative work week, 4 days/10-hour shifts, • On-Call rotation of some overnight and weekend shifts required, • On-Call Stipend $45/night and $150/weekend, • $20/hour, • Company Vehicle to Take Home, • Paid Training, • Comprehensive Medical Benefits with a wide range of choices, • 401k Retirement PlanWhy On-Site Health & Safety?, • Beyond the Ordinary: Our Field Technicians gain diverse skills, responding to various worksites from construction to refineries in a company vehicle, making a real impact., • Work-Life Balance Redefined: Eliminate your commute with "clocking in and out" from home. We offer a 4-day/10-hour work week, plus full-time, part-time, and flexible (PRN) options., • Opportunity Awaits: Since 1996, On-Site Health & Safety has expanded from California to 20+ states. Our mission: "We keep America working by being On-Site." Join us for career advancement and transfer flexibility., • Impactful Work: You'll ensure health and safety compliance, provide first aid and incident reports, perform health screenings, and draw blood when certified.Are You Ready to Join Our Team?We're seeking dedicated professionals with education or experience in:, • EMT, AEMT, Paramedic, Military Medic, or equivalent, • Licensed Vocational Nurse/Licensed Practical Nurse, • Or with additional in-house training: Emergency Medical Responder, X-Ray Technician, Phlebotomist, Medical Assistant, Certified Nursing AssistantMinimum Qualifications:, • At least 18 years of age, • Must be insurable by our motor vehicle insurance policy (minimum 3 years driving history or documented defensive driving training; no severe driving record "hits"), • Pass a criminal background check (as permitted by law), • Pass a pre-employment drug screen and maintain compliance with drug testing policy requirements.Additional Notes:, • Field Technicians must be excellent communicators, comfortable with public speaking, and able to articulate instructions clearly., • You should be comfortable standing, walking, sitting, and climbing stairs for extended periods., • Willingness to operate a motor vehicle for extended periods and long distances is essential. Ready to maximize your starting pay? Apply for the highest position you qualify for! Direct Link to all Open Positions at On-Site Health & Safety: oshshiring.com Direct Link to all Field Technician job descriptions: Join On-Site Health & Safety and be part of a team that truly keeps America working! Disclaimers: **On-Site Health & Safety conducts an extensive background check, which includes a motor vehicle driver’s license check. The insurance company and internal safety department review MVR records to determine if an applicant will be extended fleet driving privileges based on several risk factors, including previous negative “hits” on an MVR check, such as excessive moving violations, DUIs, reckless driving, etc. The search also considers a driver’s driving age/history. Applicants must meet the minimum requirements above to apply. On-Site Health & Safety offers of employment are contingent upon the successful outcome of a pre-employment background check and drug screen. ***Due to the nature of On-Site Health & Safety services, employees may have access to federally funded or owned job sites/projects. As a result, all new hires and existing employees are subject to drug testing in a manner consistent with a federally compliant test. The test may include all substances that can be found in Department of Transportation-regulated tests. The timing of testing includes pre-employment, reasonable suspicion/reasonable cause, and return to duty. ***Some employees may be classified as having safety-sensitive positions. These positions are identified as Field Personnel, including Technicians, Supervisors, Managers, Field Training Specialists, and any variation of those positions. These positions are also subject to post-accident and random testing. Due to the possible exposure to bloodborne pathogens or bodily fluids, immunization against hepatitis B is recommended.

Job DescriptionJob Description: Lexus or Toyota Automotive Service Technician MASTER Automotive Service Technician Top Tier Pay for Top Tier Techs Lexus - the name says it all! Now, Lexus of Westminster, located in Orange County, California, is offering a RARE opportunity for a professional TECHNICIAN to grab the reins of our growing team and lead it to the next level! The right candidate will have a proven track record of performing technical repairs and maintenance, control and have the ability to lead and motivate others to provide their best effort. Are you ready to take your game to the top with the best automotive manufacturer in the world? Here's a quick list of reasons to consider this amazing opportunity: We are a family-owned dealership and not affiliated with a major auto group or a nation of stores. Ownership loyalty and commitment to employees: dealership has several employees that have worked here for over 25 years! Modern service and parts center More technician racks and offices are available to accommodate future growth Massive state-of-the-art waiting area for our customers; one of the top facilities in the Western Region. Well-maintained equipment All the latest software and computer terminals in our shop ASE and Lexus master certified technicians and service consultants Our customers trust our shop so we always have plenty of good tickets year-round Elite of Lexus Award for 25 consecutive years! The only Lexus store in the area that can make this claim Lexus service technicians will be responsible for performing vehicle services, maintenance, and repair work. Experience working on Lexus and Toyota vehicles is a plus. Our team is one of the leading customer satisfaction dealers in the area!! Let Lexus of Westminster take your skills and talent to the next level! Responsibilities: Primary Responsibilities: o Correctly troubleshoot customer concerns using the latest administrative and technical tools provided o Ensure that common courtesy is shown toward all individuals you come into contact with o Keep up to date with technical publications o Make every reasonable effort to ensure safe and honorable vehicle service is delivered as promised the first time o Address all original customer concerns as indicated on the repair order o Inspect every vehicle, ensuring that the vehicle is properly maintained to the highest safety standards o Participate in Lexus or in-house sponsored training programs offered to you o Complete all paperwork completely and correctly and ensure all required shop forms are attached to the RO hard copy o Perform any other duties assigned by the Service Manager, Diagnostic Specialist, or Group Leader Be ready to have fun and enjoy the journey. Lexus of WEstminster - There's no WE without YOU! Job Requirement:Ideal candidates will have: Experience in performing warranty and non-warranty inspections, diagnostic, maintenance, and repair service on Lexus vehicles m Proven track record of achieving or over-achieving goals Outstanding communication skills Professional appearance and work ethic Great attitude and personality Superior customer service skills Ability to read and comprehend technical repair guides Ability to exercise good judgment Valid State drivers license and good driving record Required Education: High school diploma or equivalent Technical or trade school degree preferred ASE achievement for certain work levels may be required Compensation: We offer competitive pay, health, paid vacation, paid holidays, and a professional work environment. Become a member of our winning team that offers growth opportunity, excellent earning potential, and leadership that appreciates your drive, skills, and ability. And, YOU'LL HAVE FUN!! When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive service industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. It's Time To Make The Most Important Move Of Your Career! Apply Now!

Job Description Job Title: Automobile Technician Department: Service Department Reports to: Service Manager Position Description: The Automobile Technician is responsible for inspecting, maintaining, and repairing cars and light trucks. She/he provides the mechanical support for the automobile dealership. Requires proficient use of tools, such as: computerized diagnostic tools and power tools (pneumatic wrenches, lathes, welding torches, jacks, and hoists). Duties & Responsibilities: • Organizing and coordinating schedules, • Analyzing and interpreting data, • Calibrating precise measurements, • Problem solving, • Communicating with the public, • Completion of written work order, • Manual dexterity Refrigerant Handling License & Master Automobile Technician Certification required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to lift or carry 40-60 lb. mechanical parts and tools, bend, kneel, reach, stand for long periods of time, climb ladders, or handle and assemble parts. Frequently uses small hand tools and computer. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate or loud. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. Signature (Employee) Date Signature (Supervisor) Date

Job Description Join Our Growing Team as a Quality Control Technician Are you passionate about quality, precision, and making a meaningful impact? Whether you bring years of experience or are ready to take the next step in your career, this is your opportunity to grow with us and help shape the future of our Quality Control department. We’re looking for a dedicated, detail-oriented Quality Control Technician who thrives in a fast-paced manufacturing environment and is eager to contribute to a culture of continuous improvement, collaboration, and excellence. In this role, you won’t just uphold standards—you’ll help raise them. Why This Role Matters As a QC Technician, you’ll play a vital role in ensuring our products meet the highest standards of safety, quality, and compliance. You’ll work closely with production teams, support process enhancements, and help drive our commitment to Safe Quality Food (SQF), Good Manufacturing Practices (GMP), and food safety regulations. What You’ll Do • Inspect and approve incoming materials by verifying specifications and conducting visual and measurement tests, • Perform product testing for pH, TA, BRIX, Specific Gravity, Water Activity, and Microbiology, • Create and maintain Product Specification Sheets, Certificates of Analysis (C of A), and Material Safety Data Sheets (MSDS), • Monitor in-process production, communicate adjustments, and ensure alignment with quality standards, • Approve finished products and document results with accuracy and clarity, • Identify and return products for rework when necessary, ensuring proper documentation, • Maintain and calibrate measurement equipment; report any issues promptly, • Support a safe, compliant work environment by following all procedures and regulations, • Collaborate with both 1st and 2nd shift Quality Control Manager on special projects and continuous improvement initiatives, • Perform other duties as assigned What You Bring • Strong communication and leadership skills, • Exceptional attention to detail and a proactive, problem-solving mindset, • Experience in food manufacturing or quality control preferred, • Bachelor’s degree in Food Science, Chemistry, Microbiology, or a related field is a plus—but not required for candidates with hands-on experience and a growth mindset, • Candidates with strong experience in GMP, SQF, and microbiological testing may be eligible for higher starting pay Grow With Us This role offers room to expand your skills, take on new responsibilities, and contribute to a department that’s evolving alongside our company. If you're motivated, curious, and ready to be part of something bigger, we want to hear from you. Schedule & Work Environment • Monday to Friday, • 2nd Shift: 2:00 p.m. – 10:30 p.m., • This position is assigned to the 2nd shift. Advance notice will be provided if schedule changes occur., • Occasional O/T and Saturdays may be required., • Onsite work only. Equal Employment Opportunity Statement At Nature’s Flavors, we are committed to fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. We provide equal employment opportunities to all employees and applicants regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, veteran status, or any other legally protected status. This commitment applies to all aspects of employment, including recruitment, hiring, promotion, compensation, training, benefits, and termination. We believe that diverse perspectives strengthen our team and drive innovation in the food, beverage and flavor industry. Nature’s Flavors complies with all applicable federal, state, and local laws governing nondiscrimination in employment and is dedicated to maintaining a workplace free from discrimination, harassment, and retaliation. Company DescriptionAt Nature’s Flavors, we’re crafting more than just incredible taste — we’re creating a better way to live. From natural flavors to vibrant fragrances, every product we make reflects our commitment to wellness, sustainability, and originality. Our mission is rooted in clean ingredients, bold creativity, and a deep respect for nature's richness.At Nature’s Flavors, we’re crafting more than just incredible taste — we’re creating a better way to live.\r\nFrom natural flavors to vibrant fragrances, every product we make reflects our commitment to wellness, sustainability, and originality. Our mission is rooted in clean ingredients, bold creativity, and a deep respect for nature's richness.

Job Description Mechanical Estimator – ARB, Inc. Summary ARB, Inc. is on the hunt for a sharp and motivated Mechanical Estimator to help drive our projects forward with accurate, data-driven estimates. In this role, you'll dive into project specs, assess costs, and craft thorough estimates that set the foundation for success. If you're analytical, tech-savvy, and skilled at turning numbers into insights, you'll thrive in this key support role alongside our Lead Estimator. Join us and help shape what’s next! We are seeking a Mechanical Estimator to prepare accurate estimates for projects by gathering information and analyzing important metrics. The Mechanical Estimator will be responsible for understanding project requirements, identifying the costs involved, and preparing detailed estimates. The ideal candidate will have strong analytical abilities, be proficient in computer applications, and be skilled in creating detailed reports for the Lead Estimator. Key Responsibilities • Analyze bid documents and conditions to determine scope of work., • Quantify mechanical piping work scope from P&IDs and create detailed pipe estimates., • Provide engineered equipment installation estimates., • Research and understand construction sequences for equipment erection., • Analyze blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates., • Identify risks during estimates and determine proper mitigation plans., • Evaluate various factors that influence productivity and develop accurate forecasts to assist management in making decisions., • Collaborate with the proposal team to ensure all client requirements are satisfied., • Request and obtain current pricing for bulk materials from suppliers., • Obtain and evaluate subcontractor proposals., • 5-10 years in industrial construction, • Strong understanding of mechanical systems and construction processes, • Familiarity with the EPC contracting process, including bidding and pricing strategies, • Ability to work in a team environment and be self-motivated., • Positive attitude and excellent motivation skills., • Detail-oriented with the ability to multitask., • Strong interpersonal skills to interface with owner representatives, engineering firms, subcontractors, other team members, and senior management., • Strong analytical and financial analysis skills., • Proficiency in construction estimating software, Bluebeam, MS Project, Excel, and Word., • Knowledgeable in Primavera., • Annual salary range of $140–$175k commensurate with education, experience and skillset, • Paid Company Holidays, • Paid PTO Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . ARB, Inc. is the legacy subsidiary of Primoris Services Corporation that has a long history of providing maintenance, construction, fabrication, and EPC services throughout the U.S., with safety and quality as our highest value proposition. We self-perform and deliver turnkey construction and EPC services to our clients within the energy infrastructure industry (gas processing, product storage and transportation, chemical/petrochemical, power generation, renewables, refining, and mining). ARB Industrial forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. Agency Statement We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-MD1

Job Description Auto Body Collision Repair: Estimator Apprentice The Estimator Apprentice is an hourly/commission position in training for promotion to Estimator. The Estimator position is a skilled experienced professional in all aspects of repair planning in auto collision repair and proficient in managing most insurance company direct referral programs. Once the responsibilities below are achieved, promotion to Estimator will be considered with performance reviews on a 6-month cadence. Based on performance, one to three years is the usual training period for promotion to an Estimator. Job Duties/Responsibilities: • Perform all assigned responsibilities according to the Company Standard Operating Procedures., • Ability to identify express repairs and schedule vehicles appropriately to obtain cycle time efficiency., • Ability to increase profitability by proper application of labor resources, sales mix, and ensuring repair vs replace., • Write a complete auto body collision repair plan after disassembling the vehicle including thorough photo documentation and pre-scanning., • Ensure repairs adhere to OE standards, DRP part choices, refinish guidelines and ADAS requirements for calibrations and scanning., • Verify quality is checked at each stage of the vehicle repair process., • Source, order & receive parts according to insurer and company guidelines., • Ensure accurate final bill and estimate accuracy; sublet posted, all supplements are noted including customer authorizations and parts listed correctly per DRP guidelines., • Ensure proper customer communication, keeping them informed throughout the repair; ensuring notes in the file are accurate and complete., • Deliver the vehicle to the customer going over the repair, the paperwork and ensuring all final payments are collected., • Build strong relationships with DRP, Fleet and Dealer partners, meeting performance metrics and standards., • Ensure all documentation is scanned into the CCC one file: check-in sheet, estimate, adjusted sheets, invoices, payments, and final bills., • Maintain an accurate CCC Calendar and review inbox items and DRP portals daily. Key Performance Metrics: • Ensure profitability with Gross Profit of 45% or higher., • Customer Service Index Score 90+ for keeping the customer informed, on time deliveries, return rate and Net Promoter Score. Surveys should be a minimum of 40% taken monthly., • Cycle Time efficiency should be less than the state average., • Maintain $0 accounts receivable over 31 days and clean files that are ready to close at delivery. Skills/Qualifications: • I-CAR Pro-Level 1 certification is mandatory within 90 days., • Knowledgeable in Auto Body Estimating, with ability to utilize Mitchell and CCC estimating systems., • Knowledge of metal/refinish replacement and repair techniques., • Structural and suspension damage analysis ability., • Exceptional customers service skills and results, • Demonstrates excellent verbal and written communication abilities., • Adheres to the company’s non-disclosure and confidentiality policies concerning customer information.

Job Description Who we are: Casco Contractors is a full-service commercial general contractor specializing in interior buildouts, building repositions, exterior upgrades, and EV charging station solutions. Founded in 2000 and proudly woman-owned, we serve a diverse client base throughout Southern California with projects spanning office, industrial, education, retail, healthcare, and more. Over the last 25+ years, Casco's experienced team has built a strong reputation for quality work, expert value-engineering, and exceptional customer service. What you can expect: The Estimator will work as part of the Preconstruction team and will report to the Chief Operating Officer. This role will lead the bid process from initial bid phase to bid submittal, including communication with subcontractors in the Commercial Tenant Improvement environment. You will: • Analyze architectural, MEP, civil, structural, and landscape drawings, make material take-offs, obtain quotes from suppliers, and interprets specifications., • Prepare and provide detailed proposals and accurate bid packages., • Take projects from concept to completion of the bid / notice of award process, including a handoff meeting to the selected operations team., • Read, analyze, and interpret contracts, plans, specifications, construction cost data, and other contract documentation that is critical to identify project scope, risk, and opportunity., • Perform work breakdown structures, utilizing company database to identify project trades, vendors, and subcontractors., • Create preliminary master schedules as needed for RFP / bid response. All project budgets and bids will require a high-level schedule., • Review and analyze bid packages and contracts., • Prepare initial general conditions / requirements weekly rate for review by the Chief Operating Officer or Director of Project Management prior to bid / budget submission., • Maintains detailed and organized records of bid documents., • Create labor estimates for projects., • Attend meetings with subcontractors, engineers, and architects., • Maintain project involvement through the value engineering or target value design efforts., • Collaborate with the marketing team to determine bid submission requirements., • Provide high level ROM budgets to perspective clients, tenants, brokers, landlords, and project management teams., • Include budget comparison documentation for every budget or bid revision prepared., • Include a high level of detail when preparing formal bid responses., • Maintain an accurate unit pricing detail spreadsheet with current market conditions., • Ensure all client facing documents are our most current branded / marketing material., • Understand RFP requirements and provide clear documentation to address these requirements in the submission of RFP and/or bids., • Communicate frequently with vendors and customers., • Four-year bachelor's degree or equivalent experience in construction management (preferred)., • Strong working knowledge of customary construction contract language and provisions (prime contracts, subcontract agreements, supply agreements)., • Proven ability to read architectural blueprints and shop drawings., • Proven ability to extract all key data elements from contracts, and to establish processes and systems to ensure compliance with all contractual terms., • Experience managing all aspects of workflow and understanding project specs, construction documents, and perform complete window and door take-offs., • Experience AutoCAD drafter., • Advanced Excel skills., • Incredible attention to detail., • Ability to read and interpret construction documents., • Excellent written and verbal communication skills., • Strong software experience, with preference for working knowledge of MS Project, proficient in MS Office (especially in Word, & Excel), Adobe Acrobat PDF documents. As a female owned and operated construction company, our vibe is different. Casco is built on the foundation of unprecedented customer service, collaborative partnerships, community giving and the relentless pursuit of excellence. We are driven by the need to constantly innovate. We are obsessed with details, progressive technology, superior quality, and the execution of safe practices. Casco’s values are constructed on trust. We strive to empower all employees to make decisions based on our core values. We practice 100% accountability but trust that everyone is working in the best interest of the customer, the project, and the company. Click here to learn more about our culture. The US base salary range for this full-time position is $80,000 - $120,000 annually. Full time positions will be eligible for a full healthcare benefit package after 60 days of employment and a safe harbor company 401k match starts after 90 days of employment. Our salary ranges are determined by role, level, and location. Individual pay is determined by work location and additional factors, including job-related skills, experience and relevant education or training. Full-time is defined as regularly working 30+ hours per week. Casco Contractors provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff recall, transfer, leaves of absence, compensation, and training.

Job Description MINIMUM 3 YEARS OF Estimating in the Insurance Restoration or General Contracting Industry. Connect Staffing is seeking an experienced Estimator for a Restoration company in Irvine, CA. Schedule:Monday - Friday 7:00am - 4:30pm Requirements of the Water Damage Reconstruction Project Manager: • 3+ years experienceestimating in the insurance restoration or general contracting industry., • Proficiency withXactimate(Level II or higher preferred)., • Understanding of property damage restoration processes (water mitigation, demo, mold, reconstruction)., • Strong knowledge of building materials, construction sequencing, and trade pricing., • Excellent communication, negotiation, and writing skills., • Strong attention to detail and time management under multiple deadlines., • Familiarity with XactAnalysis, Encircle, MICA, or other restoration documentation systems is a plus., • Valid California driver’s license and reliable vehicle. Benefits: • Competitive salary, • Fuel card and cell phone reimbursement, • Company vehicle Responsibilities of the Estimator : • Create detailed and accurateXactimate estimatesfor water, fire, mold, and reconstruction projects., • Perform on-site inspections to document damage and gather all relevant data for estimating., • Write comprehensive scope notes and line-item details consistent with insurance carrier standards., • Communicate with adjusters, property owners, and internal teams to finalize approved scopes., • Manage supplements and change orders promptly and professionally., • Review vendor/subcontractor bids and integrate them into job costing., • Maintain consistent profit margins in accordance with company targets., • Upload all documentation to XactAnalysis or carrier portals as required., • Support project managers by providing clear scope details, budgets, and material allowances., • Stay current on carrier estimating guidelines, pricing updates, and Xactimate revisions. All candidates meeting the minimum requirements will receive an SMS invite to an AI-based interview. This interview helps us understand your qualifications and experience, and candidates who complete it will receive first consideration. Please expect a text message from (302) 405-6282 within 30 minutes of submitting your application. #CONHP

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Paid time off, • High School Diploma, GED or equivalent, • Machine Operator experience, • Experience with Standard Operating Procedures and process requirements, • Must be able to lift and carry items weighing up to 50 lbs., stand and walk, climb up and downstairs, to stoop, bend over, and lean into boxes throughout shift, • Mechanically inclined, production oriented, and safety and quality conscious, • Basic computer skills including familiarity with Microsoft Office (Excel, Word), • Valid Drivers License, • Will be trained on site to drive a forklift Responsibilities: • Monitor/visually inspect various automotive components, • Packing parts per SOP instructions, • Operate and maintain Shot Blast equipment, loading and unloading components., • Clean shot blast room and work area throughout shift., • Use computer systems and bar code scanners for lot traceability of components., • Understand production schedule and daily assembly requirements., • Support other operations during periods of low shot blast demand.

Job Description Demo/Grading - Heavy Equipment Operator - Track Loader $30-$42/Hourly+, DOE Benefits, Paid Holidays, Vacation Time, 401K, etc... Full-Time, Non-Exempt, Mon-Fri work Schedule, some Saturdays Since the company's birth, in 1981, Tight Quarters, Inc. has provided quality assistance to the world of demolition, grading, and concrete cutting and breaking for commercial, residential and industrial communities throughout greater Southern California. Requirements: • Experience operating excavator with thumb both full-size excavator, mini-excavator, skid steer, Bobcat compact track loaders, and large track loaders like the CAT 953 and 973., • Ability to read and understand grading plans., • Experience working in demolition of residential and commercial structures., • Meet schedules and timelines., • Ability to work safely, productively, and efficiently., • Experience in demolition., • Understand and follow oral and written instructions., • Work cooperatively and collaboratively with other team members., • Maintain punctual and consistent attendance., • Must be able to work overtime when required., • Heavy equipment operation: 3 years (Required), • California Driver License (Required) Benefits: • 401(k) + matching, • Health insurance, • Dental insurance, • Vision insurance, • Paid Time Off, • Stability - We've been in business for over 40 years!, • Exceptional Work Culture - We stay true to our Core Values! Job Posted by ApplicantPro

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Summary Terran Orbital is seeking an experienced PCBA Test Technician to join our dynamic team. Reporting to the Production Manager, the PCBA Test Technician will PCBA Test Technician will perform electrical test on PCB Assemblies using a flying probe equipment and troubleshoot test failures. Weekday shift (Monday-Thursday) from 6:00AM - 4:30PM Key Duties and Responsibilities • Perform flying probe test on PCBAs., • Develop test programs for flying probe tester., • Maintain flying probe tester., • Assist with debugging/troubleshooting and root cause identification of test failures., • Utilize manual test instruments such as multimeters, oscilloscopes and power supplies to test and troubleshoot failed PCBAs., • Interpret test requirements by reading work instructions, drawings, and schematics., • Document and report all tested and WIP (work in progress) PCBAs., • Generate and close-out non-conformance reports for failed PCBAs., • 5+ years of experience with PCBA testing in a high-mix mid-volume environment (8+ years preferred), • Working experience with operating flying probe equipment, • Familiarity with ESD and 6S housekeeping practices., • Working knowledge IPC-A-610 and J-STD-001 standards, • Experience with engineering documents (drawings, BOMs, schematics…), • Capable of interacting with PC-based operating systems (Microsoft Suite, MES, ERP, etc.), • Strong verbal and written communication skills, • Willing to work in a cross-functional capacity and be trained to perform all manufacturing-related processes., • Energy and passion for inventing and creating new solutions, challenging the status quo, and driving positive change., • Experience with Takaya flying probe systems., • Experience with manual assembly of SMT components., • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.