Trabajos Construction & Trades en Orange, California - Page 6Crear alertas

Job DescriptionBenefits: • Competitive salary, • Flexible schedule, • Health insurance Knowledge: • Familiarity with pump and motor function and design, • Understanding of machining speeds, feeds, and tooling, • Knowledge of pump and turbine components, critical fits, and surfaces, • Proficient at operating boring mills, lathes, mills and grindingJob Responsibilities:, • Fabricate parts and tooling, • Use precision measuring tools, • Inspect machinery and adjust as needed, • Ensure compliance with safety regulations, • Work with the mechanics to find repair solutions, • Operate lathes, mills, horizontal boring mill safely and efficientlySkills and Abilities:, • Perform high-quality, efficient work independently, • Proficiency with measuring equipment (ID & OD micrometers, dial indicators), • Expertise in advanced machining operations, including complex parts and milling setups, • Complete company documentation accurately and promptly, • Must be proficient in the use of all types of gauges, micrometers, verniers, etc. Hoist fixtures, chucks, collets, steady rests, etc. Normal hand tools for machinists. Drills, taps, honing equipment, bars, etc., • Must have a well-rounded knowledge of fabrication and assembly techniques, tools and equipment, materials and shop equipment., • Must know the working qualities of a wide variety of materials including cast iron, steel, aluminium, copper, brass and other metals and plastics., • Must possess good mechanical aptitude demonstrated as success in previous machine operation or like activities., • Must possess good manual dexterity and hand-eye coordination., • Strives to continuously build knowledge and skills; Shares expertise with others., • Listens, gets clarification and communicates cordially and positively with fellow employees., • Ability to read, write, verbalise and comprehend instructions and correspondence at the highest levels., • Exhibits objectivity and openness to others' views; Gives and welcomes feedback., • Includes appropriate people in decision-making process., • Prioritises and plans work activities; Uses time efficiently., • Approaches others in a tactful manner; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Meets productivity standards; Completes work in timely manner; Strives to increase productivity., • Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly., • Changes approach or method to best fit the situation.Axis is looking for full time or part time skilled machinist. We offer flexible hours and time off requests.

Job DescriptionThank You for your interest in Anza Management; we are looking for a full-time floater Maintenance Technician. Job Summary: The Maintenance Technician performs basic apartment and related facilities maintenance in order to preserve the quality and value of the apartment property. Supplements maintenance, landscape, and management efforts to meet company standards and attract residents. Maintenance Technician Requirements: • Days/Hours will vary based on property location and weekend availability is needed, • This is a floater position and will be covering several properties where needed, within the same mile radius, • Minimum 1 year of experience in a similar role preferred, • Valid California Driver’s License, • Will be subject to a Background/Physical/Drug Screen, • Must be eligible to work in the United States What we offer: • 100% Employer paid medical benefits, • 10 Vacation Days, 10 Sick Days, 8 Paid Holidays, and up to floating two days off, • Training Available, • State-funded Retirement Program ( Cal Savers), • Room for career growth, • Generous Referral Program Maintenance Tech Responsibilities: • Knowledge of installations and repairs in plumbing and electrical issues, • Respond to maintenance requests of plumbing, electrical, heating, and general repairs in an apartment setting, • Handle repair work on walls, floors, doors, and woodwork, • Paint interior of apartment buildings and respond to safety issues, • Document repairs and performed duties, • Handle maintenance and troubleshooting of mechanical processes, • Alert appropriate authorities of any malfunctions in the building, • Respond to emergency situations in a prompt manner Why Anza Management? Become part of a diverse and growing organization that has been in business for more than 40 years, despite being scattered across multiple locations we are still able to instill a sense of purpose and belonging among the Anza team. We attribute our growth and success to the high-quality service each member of the Anza team provides to both our residents and property owners. We take great pride in being the first firm headquartered in Orange County to be designated an Accredited Management Organization (AMO) by the Institute of Real Estate Management. Anza Management is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status, or any other protected status in accordance with all applicable federal, state, and local laws Anza Management considers for employment qualified applicants with criminal histories in a manner consistent with the requirements of EEOC/FEHC/ADA Laws and the Fair Chance Initiative for Hiring (Ban the Box) Ordinance. Anza Management abides by all applicable federal, state, and local employment laws, including EEOC/FEHC laws. Nothing in this job posting guarantees employment.

Job Description Roles and Responsibilities: • Use power and hand tools to perform repair and maintenance work., • Services equipment by oiling, greasing, and coolants as required., • Operate forklift and other basic loading and unloading equipment as required, to move machine chips, and hazardous material. Required Job Knowledge, Skills and Experience: • Ability to perform physical tasks involving bending, squatting, standing for extended periods of time, pushing, reaching and some lifting., • Committed to quality service., • Displays a high level of initiative, effort and commitment towards completing assignments efficiently. Works with minimal supervision. Demonstrates responsible behavior and attention to detail., • Must be willing to work overtime, weekends and Holidays., • Ability to fluently read, work and follow instructions in English., • Possess a Class C, California Driver’s License., • Maintain good driver safety record. (Must provide DMV record annually)., • Must be a U.S. Citizen, • Attendance and punctuality at work are essential functions of this position. Preferred Job Knowledge, Skills and Experience: • Four years of general maintenance and repair. Experience on CNC lathe and mills or equivalent combination of experience will be considered., • High School Diploma or equivalent., • Good communication skills., • Good numerical and reasoning ability., • Ability to organize tasks and work with others. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job DescriptionSalary: $25.00 - $28.00 Route Maintenance Technician Orange County & Surrounding Areas Employment Type: Full-time (Monday - Friday) | 30-40 hours/week Compensation: $25.00 $28.00 per hour (DOE) Experience Required: 2+ years as a service technician in facility maintenance industry with 2+ years experience in plumbing, electrical, painting and light carpentry. Perks: Company Vehicle, Gas Card, Travel Pay Incentives, Company Phone Route Maintenance Technician Benefits: • Company vehicle and gas card, • Travel pay incentives, • Medical, dental, vision, life insurance, • 401(k) with employer match, • PTO, sick time, and holiday pay, • Flexible Spending Account (FSA), • Employee Assistance Program (EAP), • Career growth opportunities, • Employee discounts Why Join AAA Facility Services? Since 1995, AAA Facility Services has delivered skilled trade services with a customer-first philosophy. Weve built a reputation for going to extra mile not just for our clients, but for our team members and service partners. Our core business focuses on commercial facility services, including in-house electricians, plumbers, and technicians, supported by a trusted network of service providers. We believe that taking care of our team members means theyll take care of our clients and thats the foundation of our success. About the Route Maintenance Technician Role Were looking for a dependable and versatile Route MaintenanceTechnician to join our team. This role is ideal for someone who enjoys working independently, takes pride in their craftsmanship, and thrives in a fast-paced commercial environment. What Youll Do As A Route Maintenance Technician: • Perform routine building maintenance and repairs across commercial sites., • Respond to service calls, emergencies, and work orders., • Work across multiple trades including carpentry, electrical, HVAC (minor), flooring, drywall, painting, framing, doors and more., • Complete multi-day projects with attention to detail and minimal supervision., • Conduct jobsite walks and inspections to ensure safety and note it accordingly. Route Maintenance Technician Ideal Candidate: • Has strong problem-solving and time management skills., • Can work independently and deliver high-quality results., • Versatility across multiple trades is a plus., • Has a proactive, solutions-oriented mindset., • OSHA 10 Certificate Apply Today! If you're a skilled tradesman looking for a company that values your work and supports your growth, we want to hear from you. Join AAA Facility Services and be part of a team that takes pride in delivering excellence.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off Position Overview Provides emergency restoration and disaster recovery services to customers following assigned work orders provided by the Lead Technician/Crew Chief. Job Responsibilities • Performs water/fire/smoke damage and mold remediation repair as directed by supervisor to include water extraction, pack-out of contents, removing/disposing of non-salvageable materials, cleaning, light construction and demolition, • Sets up and monitors air movers and/or dehumidifiers, • May perform other cleaning duties (i.e., construction cleaning, fire/smoke/odor cleaning, mold remediation, carpet and upholstery cleaning, etc.) when part of mitigation or restoration jobs, • Reports any equipment malfunction to supervisor, • Reports any customer problems or damage to supervisor, • Completes assigned job tasks according to company processes while maintaining quality control on each jobJob Requirements, • High school graduate or equivalent, • Ability to work within a team, • Takes instruction and stays on task, • Follows company guidelines and standards, • Good verbal and written and communication skills, • Good customer service skills, • Can read and follow product label usage instructions, • Reports to work on time in a clean, complete uniformPhysical Demands and Working Conditions The physical demands are representative of those that must be met by an employee to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Incumbent must be prepared to: • Move up to 70 pounds often, by lifting, carrying, pushing, pulling, or otherwise repositioning objects., • Must be able to stand and walk for extended periods of time. Lifting, squatting, crawling and crouching is required., • Express or exchange ideas with others and receive and act on detailed information given., • For safety reasons, respirators, which are used in certain situations, must be able to seal to your face., • Be exposed to various inside and outside working conditions: The change of environment such as with or without air conditioning and heating. Disclaimer The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. The Company reserves the right to modify this description in the future, with or without notice to the employee. This Job Description does not create an employment contract, implied or otherwise, and employment with the Company remains at will. These responsibilities are subject to possible modification to reasonably accommodate individuals with disabilities.

Job DescriptionWe are seeking an experienced and detail-oriented Painter to join our team for a full-time position. In this role, you will ensure that all painted surfaces meet our high standards of quality and finish, contributing to the overall excellence of our production process. Additionally, we are looking for someone who is able to patch and paint sheetrock walls in office setting, possesses knowledge/experience installing corner guards, and complete small carpentry tasks. Pay: $22.00per hour. The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data.Shift: Day – Monday – Friday – 7:30am – 4:00pm Benefit Information:ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM ABM 2025 Employee Benefits (Frontline) Key Responsibilities:· Project planning · Experience with Scuff Master Paint · Able to install wall blocking for monitors · Knowledgeable on reading floor plans· Computer experience on ticketing systems, emails, Microsoft Word· Daily & weekly status report· Ability to set up and work on ladders and scaffolding· Be able to lift 50 lbs.· Daily clean up after task completion· Plan and lay out work from blueprints, drawings, models, or verbal instructions, using a variety of carpenter's hand tools, portable power tools, and standard measuring instruments · Make standard shop computations relating to dimensions of work · Select materials necessary for the work · Paint walls, woodwork, and fixtures · Identify surface peculiarities and determine the types of paint required for different applications · Prepare surface for painting by removing old finish or by placing putty or filler in nail holes· Mix colors, oils, white lead and other paint ingredients to obtain proper color or consistency · Use spray gun and/or brush to apply paint Qualifications:A minimum of 1 year of experience in commercial or industrial painting highly preferred.Strong knowledge of paint types, application techniques, and appropriate tools for touch-up work.Ability to work both independently and collaboratively as part of a team.Commitment to quality, safety, and productivity standards. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Join a Team That’s Redefining Dental Innovation At BioTec Dental Laboratory, we don’t just create dental restorations — we craft precision, confidence, and smiles. We’re looking for a Night Shift Milling Technician who takes pride in high-quality craftsmanship, thrives in a hands-on, detail-oriented environment, and is ready to be part of a growing, technology-driven dental lab. What You’ll Do • Operate and maintain CAD/CAM milling machines for dental prosthetics., • Load and calibrate milling equipment and materials., • Review digital design files (Exocad or similar software) and ensure accuracy prior to milling., • Perform routine machine maintenance and report any technical issues., • Collaborate with designers and production staff to ensure cases are completed on schedule., • Maintain a clean, organized, and safe work environment. What We’re Looking For • Experience in dental lab milling operations preferred (experience with Roland, Imes-Icore, or similar systems a plus)., • Familiarity with digital dental workflows (CAD/CAM)., • Strong attention to detail and ability to work independently., • Willingness to work overnight and ensure production goals are met., • A positive attitude and a commitment to quality craftsmanship. Why Join BioTec Dental Laboratory • Company DescriptionBiotec Dental Laboratory is a dynamic, fast-paced dental laboratory committed to excellence in craftsmanship, innovation, and service. With a strong family-oriented culture, we value teamwork, quality, and continuous improvement.Biotec Dental Laboratory is a dynamic, fast-paced dental laboratory committed to excellence in craftsmanship, innovation, and service. With a strong family-oriented culture, we value teamwork, quality, and continuous improvement.

Job Description POSITION SUMMARY: Under general supervision, this position is primarily responsible for the visual inspection and testing of electronic assemblies, parts, and components, and performs other work-related duties as assigned. ESSENTIAL FUNCTIONS: • Inspects with strong vision of units, assemblies, and systems according to written inspection procedures, specifications, drawings, samples., • Tests finished products and raw materials., • Measures products/materials based on drawings, parts lists, illustrations and/ or samples to verify conformance and detect assembly errors., • Examines the alignment of parts and verify installation of hardware on assemblies and subassemblies., • Accepts/rejects and records inspection results of type and quantity based on conformance to acceptance criteria., • Follows and enforces all ISO procedures., • Performs IQC/QC/QA Gate functions GUIDELINES (ABILITIES, KNOWLEDGE, AND SKILLS): • Knowledge of computer usage and Microsoft Office, • Excellent vision, • Good organizational skills, • Ability to read, write, and speak English, • Knowledge in using tools/equipment for measurement/inspection such as microscope, caliper, micrometer, and RCL meter, • Knowledge of IPC-A-610 EDUCATION/EXPERIENCE: Highschool graduate or equivalent Company DescriptionWith over 20 years of experience AnDek Staffing has created and maintained relationships by understanding our partners needs and continuously seeking ways to improve our services.With over 20 years of experience AnDek Staffing has created and maintained relationships by understanding our partners needs and continuously seeking ways to improve our services.

Job Description CNC Lathe Machinist Santa Ana, CA, US About the Role: The CNC Lathe Machinist plays a crucial role at Karman Space & Defense by operating and maintaining CNC lathe machines to produce precision components. This position requires a keen eye for detail and a strong understanding of technical drawings and specifications to ensure that all parts meet stringent quality standards. The machinist will be responsible for setting up machines, selecting appropriate tools, and making necessary adjustments to optimize production efficiency. Additionally, the role involves troubleshooting and resolving any issues that may arise during the machining process. Ultimately, the CNC Lathe Machinist contributes to the overall success of the manufacturing team by delivering high-quality products on time and within budget. Compensation & Benefits: • opportunity for 10+ hours of overtime (paid at time and a half), • Medical, Dental, • Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO) | Paid Holidays, • Tuition Reimbursement, • 2nd Shift: 4:00 PM to 12:45AM, • Monday-Friday Minimum Qualifications: • High school diploma or equivalent., • Proven experience as a CNC machinist, specifically with lathe operations., • Technical degree or certification in machining or a related field., • Experience with CAD/CAM software., • Set up and operate CNC lathe machines according to specifications and production schedules., • Read and interpret technical drawings, blueprints, and schematics to determine machining requirements., • Select and install appropriate tools and fixtures for machining operations., • Monitor machine operations and make adjustments as necessary to maintain quality and efficiency. The required skills for this position include proficiency in CNC programming and the ability to read technical drawings, which are essential for accurately setting up and operating lathe machines. Attention to detail is critical, as the machinist must ensure that all components meet precise specifications and quality standards. Problem-solving skills are also important, as the machinist will need to troubleshoot and resolve any issues that arise during production. Preferred skills, such as familiarity with CAD/CAM software, enhance the machinist's ability to create and modify programs for improved efficiency. Overall, a combination of technical skills and practical experience will enable the CNC Lathe Machinist to excel in their daily tasks and contribute to the success of the manufacturing process.

Job Description Senior Electronic Technician needed on a part-time basis for a medical device manufacturer in the Irvine Spectrum. This position will work 8-16 hours per week, 2 days between Mon-Fri, and company is flexible as to which days/hours are worked as long as during 8:00 AM - 5:00 PM. This assignment will last at least 3 months. Pay rate depends on experience, $35-40/hr. Essential Duties & Responsibilities: • Electronic circuit & system support: contribute to the design, assembly, testing, and debugging of electronic circuits and systems., • Fixture & Equipment Design: assist in the design and development of testing fixtures and related equipment to facilitate testing., • Test Equipment Utilization: build, configure, and operate test and assembly equipment, ensuring accurate testing and validation., • Test Article Preparation: develop and prepare test products or prototypes for evaluation and testing. Required Knowledge, Skills and Abilities: • Model making, fixture building, assembly techniques, fabrication skills with electromechanical devices., • Ability to read and follow schematics and layouts., • Soldering and electronics prototyping experience required., • RF and BLE experience a plus., • Experience in an electronics manufacturing environment a plus.

Job Description “Every person deserves compassion, dignity, and the safety of a place to call home.” Homelessness is the largest social and public health crisis in California. Illumination Health + Home is a growing non-profit organization dedicated towards disrupting the cycle of homelessness by providing targeted, interdisciplinary services in our recuperative care centers, emergency shelters, housing services and children's and family programs. IF currently has 13+ facilities with 22+ micro-communities scattered across Orange County, Los Angeles County and the Inland Empire. Job Description a Facilities Technician 1 is responsible for the repair and upkeep of IF facilities and should possess the knowledge to complete repairs under the guidance of another technician. This position is eligible for a signing bonus of $500.00 Pay rate for this role is $20.00-$22.00 an hour. Responsibilities • Complete routine repairs of company facilities and properties., • Perform repairs on electrical, plumbing, mechanical systems, and interior and exterior building finishes., • Maintain a safe working environment by ensuring all tools have their respective guards and safety procedures are being followed., • Receive feedback and knowledge from higher technicians to grow Core Competencies., • Inspect company facilities for issues that need to be addressed., • Occasionally install new flooring in rooms as needed., • Complete routine preventative maintenance of company facilities and properties ( replace air and furnace filters, smoke alarms, and water filters)., • Routinely clean and organize company assets assigned to you ( Vehicles, tools, equipment)., • Assist in preparing rooms for new client intakes (build furniture and place)., • Ensuring security of our facilities and properties by using discretion with keys, codes, and combos)., • Lock up facilities and properties as needed., • Participate in team projects., • Clear out newly vacated room of previous client belongings and trash to prep for room for repairs. Expectations, • Passion and commitment to serving those experiencing homelessness., • Effectively using interpersonal and communication skills., • Must be able to work independently without constant supervision., • Must be able to take direction and positively respond to constructive criticism., • Fast Learner, able to work in a high paced environment and able to work under pressure., • Demonstrate leadership skills and take the initiative in decision making when necessary., • Possess organizational skills, thoroughness and attention to detail., • Excellent judgement and effective interaction in challenging situations., • Working effectively with a diverse and multicultural client body and staff., • Be able to meet targets and work under pressure., • Communicate with tact and professionalism., • Other responsibilities and tasks as assigned by Facilities Supervisor., • High school Diploma or equivalent., • 2 years ' relevant experience., • Basic computer skills, including the ability to send and receive emails and summarize data in spreadsheets., • Valid CA Driver's License and eligibility for company vehicle insurance. Core Competencies: In addition to the requirements above, a facilities technician 1 should have basic proficiency in 3 of the competencies listed below. • Safe Practices, • Technological Skills, • Electrical, • Plumbing, • Interior Finishes, • Exterior Finishes, • Medical Insurance funded up to 91% by Illumination Foundation (Kaiser and Blue Shield), depending on the plan, • Dental and Vision Insurance, • Life, AD&D and LTD Insurance funded 100% by Illumination Foundation, • Employee Assistance Program, • Professional Development Reimbursement, • 401K with Company Matching, • 10 days vacation PTO/year, • 6 days sick PTO/year, • 10 days holiday PTO/year 212D81Rppl

Job Description Summit Anaheim currently has an open position for a Repair and Maintenance Technician (2nd shift). Summit Interconnect is a manufacturer of advanced technology printed circuit boards with a specific focus on complex rigid and rigid-flex product with unique expertise in RF/Microwave applications. Position Summary: Under general supervision provides production support within the Printed Circuit Board Industry ensuring that HVAC/Heating equipment and Summit facilities/machinery are maintained and optimized. Performs tasks such as HVAC/Heating and electrical troubleshooting and repair, preventive maintenance which may include the Waste Treatment Department. Qualifications: To perform this job successfully, an individual must have a minimum of three (3) years’ experience in the printed circuit board industry and must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Job Requirements: • High School Diploma. College/Trade schooling is a plus., • Must have Electrical and Electronic Controls knowledge used in an industrial facility., • Mechanically inclined and experience with various maintenance shop tools and testing equipment., • Must be able to work on all types of ladders at recommended safe heights., • Have the strength, agility and endurance to work in restricted spaces and/or on top equipment, • Must have sufficient lung capacity to perform job duties with Personal Protective Equipment (i.e. Gas Mask)., • Must be able to lift 50lbs (may be required to lift pumps, motors and material with or without assistance)., • Capable of sufficiently interrupting Electrical wire diagrams and schematics for the use of troubleshooting failures or to make modification as needed., • HVAC experience with an EPA Certification is a plus., • Willing to take ownership of responsibilities that are assigned to them and have a willingness to be a team player and help out where needed., • Welding all types of materials is a big plus with the use of - TIG, MIG, Oxy/Acetylene Torch, Electrical Arc, Hot Air Plastic Welding., • Assess quality, determine root cause, and corrective actions in the areas of duties, • assigned., • Responsible for optimizing HVAC/Heating equipment utilization., • Installation and modification of needed duct work., • Maintains tools and equipment for proper calibration, function and operation per, • procedures., • Replace or repair electrical wiring, motors, water pumps, and other integrated parts, • of air conditioning/heating, refrigeration systems., • Identify necessary components and materials needed to make repairs for Summit, • facility., • Performs daily maintenance on specified equipment., • Responsible for overall maintenance of facility which may include such repairs as, • painting, patching, tile, plumbing and any other facility needs as directed by Manager., • Cut and drill holes in floors, walls and roof to install needed equipment using power, • tools., • Create and maintain inventory log and equipment making sure all equipment is, • always organized and accounted for., • Maintaining safe and clean working environment by complying with procedures,, • rules, and safety regulations., • Assure safety standards are used which comply with Company, Local, City, State, • and Federal guidelines., • Prepare and maintain various logs and record on work performed., • Responsible to request required materials, supplies and equipment parts from, • Manager., • Must be able to stand for long periods of time., • Must be able to lift up to 50 lbs. Compensation/Benefits: Summit offers a variety of health and benefit programs. Which include Medical, Dental, Vision, HSA plans, Life Insurance, PTO, and Paid Holidays. Benefits are effective 1st day of the month following 30 days of hire. Pay Range for this position is $18.00 - $30.00 an hour based on experience. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

Job Description MINIMUM 1 YEAR LEAD EXPERIENCE IN WATER & MOLD RESTORATION. Connect Staffing is seeking a hard-working Lead Restoration Tech for a restoration company in the city of Irvine, CA. Schedule: Monday through Friday, 8:30 am - 5:00 pm, with overtime as needed. Requirements of a Restoration Tech: • Minimum 1-year experience in a lead restoration technician role, • Must have a valid Driver's License and a Clean DMV record, • Must speak English or be Bilingual, • Experience working with residential customers and providing quality customer service., • The ability to stand for extended periods., • Current IICRC certification is preferred but not required., • Prior experience in roles such as Water Damage Lead Technician, Disaster Recovery Team Leader, Mold Remediation Lead Technician, Contents Restoration Lead, Cleaning & Restoration Crew Leader, Fire Damage Lead Technician, Lead Restoration Technician, Lead Mitigation Technician, Lead Mold Technician, Lead Water Technician is a big plus! Benefits of a Lead Restoration Tech: • Affordable Health and Dental Plans, • Cal-Savers Benefits, • Referral Program Responsibilities of a Lead Restoration Tech: • Lead setup, operation, and monitoring of restoration equipment (extractors, dehumidifiers, air scrubbers, ozone generators), ensuring safe and efficient use by the team., • Clean and disinfect equipment after each job., • Maintain detailed and accurate records of work performed, including photos, moisture readings, and job notes., • Represent the company in a professional manner at all times., • Set up and monitor drying equipment (air movers, dehumidifiers)., • Perform moisture mapping and take accurate readings using specialized equipment (moisture meters, thermal imaging cameras)., • Apply anti-microbial and anti-fungal treatments., • Remove damaged building materials (e.g., drywall, flooring, insulation)., • Follow strict IICRC (Institute of Inspection, Cleaning and Restoration Certification) and industry guidelines for safe and effective mold removal., • Communicate professionally, empathetically, and clearly with property owners/managers, explaining the restoration process, timelines, and answering questions. All candidates meeting the minimum requirements will receive an SMS invite to an AI-based interview.This interview helps us understand your qualifications and experience; candidates who complete it will receive first consideration. Please expect a text message from(302) 405-6282within 30 minutes of submitting your application. #CONHP

Job Description MAINTENANCE TECHNICIAN – Vintage Canyon/Vintage at Stonehaven USA MULTIFAMILY MANAGEMENT, INC. is engaged in the management of residential multifamily communities. We develop, build, own and manage our properties. Our properties are located throughout California and Nevada and range in size from 52 units to 397 units. We specialize in Tax Credit; Section 42 properties (LIHTC – Low Income Housing Tax Credit). USA Multifamily Management is a subsidiary of USA Properties Fund, Inc., a full-service, fully diversified, privately owned real estate investment and development organization. When you join the USA team, you'll find a collaborative work environment and the opportunity to develop your talents in an organization that provides needed services to those in our communities. We also offer: • Medical, dental, vision, and chiropractic insurance., • Paid time off, including holidays and 8 hours of paid volunteer time per year., • Unpaid time off., • Bonus program eligibility., • A wellness incentive program., • 401(k) retirement savings plan with company match., • Life insurance, • Pre-tax healthcare and dependent care flexible spending accounts., • Regular training opportunities and career development planning., • Tuition assistance and professional designation reimbursement., • A scholarship opportunity for dependents of full-time employees., • An employee referral bonus program. We are seeking a floating Maintenance Technician for 2 communities located in Brea and Yorba Linda, CA, approximately 6 miles apart supporting a total of 225 units. The Maintenance Technician will report to the Community Manager. This is a non-exempt position with a Monday through Friday work schedule, from 7:30 am to 4:30 pm; some flexibility will be required to accommodate the occasional need to work overtime and weekends. We offer a competitive salary, depending on experience, starting at $23 to $25 per hour. JOB SUMMARY: The Maintenance Technician is to maintain the physical integrity of the community at all times. This involves ensuring a safe and secure living environment for residents, visitors, and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Community Manager. The Maintenance Technician will assume all maintenance responsibilities. REQUIRED SKILLS: · At least two (2) years of experience in maintenance · Computer skills desired EXPERIENCE & EDUCATION: · Plumbing and electrical repairs · Light carpentry · Glass and screen replacements · Unit turns · Painting · High School Diploma or GED Certificate preferred TO APPLY: Attach cover letter and resume to online application USA Multifamily Management, Inc. is an equal opportunity employer and provides equal access to hiring and employment opportunities to all persons regardless of race, ethnicity, gender, religion, national origin, marital status, sexual orientation, gender identity, age, physical or mental disability, medical condition or veteran's status. USA Multifamily Management, Inc. is committed to maintaining a drug free work place.

Job DescriptionSalary: $10,000-$12,000 per month About Stack Modular Stack Modular is a leading provider of high-end, modular construction solutions for clients across North America. We specialize in steel-frame modular projects for the hospitality, high-density residential, and resource sectors. Our state-of-the-art factory in Zhangjigang operates at the highest level of quality, building to precise North American safety and quality standards. We are a dynamic, project-based company that is redefining how the world builds. We are seeking an experiencedCalifornia-Certified HVAC Technician to provide supplemental training, quality oversight, and process optimization. The successful candidate will spend up to 8 weeks on-site at our factory in China to ensure our housing modules meet the highest North American HVAC standards for quality, durability, and compliance.This is a temporary, high-impact consulting role requiring deep expertise in construction best practices, particularly within a controlled factory environment. Key Responsibilities The successful candidate will be responsible for a comprehensive review and improvement of all Mechanical (HVAC) Systems processes, including: 1. Design & Material Review • Review and Validate: Critically examine current HVAC system designs, duct/line routing, connections, and equipment installations to ensure compliance with relevant US/California Mechanical Codes (e.g., CMC, UMC, Title 24) and best practices for modular construction., • Material Selection & In-house Testing: Evaluate and recommend optimal HVAC materials (e.g., ductwork, refrigerants, line sets), connections, and equipment systems (e.g., split systems, VRF) readily available in the local market, suitable for export, and meeting high-quality and performance standards. Establishing in-house protocols for system mock-ups, pressure testing, air balancing, and documenting test results will be an essential aspect of the role. 2. Process Optimization & Training • Process Mapping: Review and revise the current workflow for equipment setting, refrigerant line set connection, ductwork installation, and testing within the modular production line., • Best Practices Training: Review and improve upon the existing training program. Deliver hands-on, practical training to factory staff on North American HVAC installation and connection techniques to ensure proper airflow, system efficiency, and guarantee code compliance., • Tooling & Equipment: Evaluate existing tools and equipment (e.g., refrigerant recovery/charging equipment, vacuum pumps, manifold gauges, leak detectors, air balancing tools, and diagnostic equipment) and recommend upgrades, additions, or modifications to improve process efficiency and consistency. 3. Quality Assurance & Standards Development • Quality Control (QC) Program: Review and enhance the current QC inspection points, criteria (including equipment setting, line set brazing/swaging, pressure/leak testing, air balancing, and final connection checks), and documentation processes for HVAC systems., • Defect Root Cause Analysis: Identify and troubleshoot common defects (e.g., refrigerant leaks, incorrect airflow, improper venting, equipment defects, and electrical issues) and develop preventative measures., • Standard Operating Procedures (SOPs): Develop clear, visual, and concise SOPs for all critical steps in the HVAC installation and testing processes. Qualifications • Experience: A minimum of 10 years of hands-on experience in high-quality commercial or residential HVAC installation, with specific experience ensuring compliance with California Mechanical/HVAC Codes and inspection requirements. Experience as a working foreman and/or trade superintendent is considered an asset., • Technical Expertise:, • Deep knowledge of various HVAC systems, including split systems, VRF/VRV, ductwork, and ventilation systems., • Expertise in refrigerant handling, pressure/leak testing, air balancing, and equipment specification/installation., • Comprehensive understanding of material compatibility, thermal expansion considerations, and seismic restraints., • Modular/Factory Experience (Preferred): Experience working on modular, prefabricated, or production-line construction projects is a significant asset., • Training & Communication: Proven ability to effectively train, mentor, and communicate technical information to diverse, non-native English-speaking teams. Not to worry, our team is diverse and has extensive experience working with North American consultants and tradespersons., • Travel: Must be willing and able to travel and reside in China for the duration of the 6-8 week assignment. Compensation and Logistics • Duration: Up to 8 weeks on-site, with potential for follow-up remote consultation., • Compensation: Competitive consulting fee commensurate with experience and expertise., • Logistics: All travel, visa, accommodations, and per diem expenses will be covered by the manufacturer.

Job Description PRIMARY PURPOSE OF JOB: Process orders of parts through nital etch/temper etch/ammonium persulfate etching operations per shop traveler requirements and interpret results of testing. PRINCIPAL DUTIES/KEY RESULTS REQUIRED: • Rack and prepare parts for processing through the nital etch line, • Prepare parts for nital etch processing by abrasive blasting and glass bead cleaning, • Interpret accurate results from the nital etch process, • Recognize real and false indications and be able to distinguish between, • Report results of testing on shop traveler, • Package and prepare parts for embrittlement relief following nital etching, • Perform other duties as assigned by foreman. WILL ACT AS BACK UP FOR THE FOLLOWING: MAG General Helper I, II, and III SUPERVISION OF OTHERS: Only as needed to prepare parts for processing and post-processing bake operation. POSITION REQUIREMENTS: • Ability to speak, read, write, and understand the English language., • Ability to follow written instructions, specifications, and procedures., • Ability to understand basic drawings and sketches., • Pass an annual vision test consisting of ability to read Jaeger #1 at a distance of at least 12 inches., • Pass written and practical examinations on an annual basis with a score of at least 80 percent., • Have no physical limitations that would interfere with ability to lift, carry, and suspend parts on hooks, racks, and baskets during the processing and examination of parts., • Ability to work around hazardous chemicals and loud noises., • Knowledge of safety laws and issues We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job Description Location: Anaheim, CA | Full-Time Position Summary: We are seeking an experienced Shipping and Receiving Quality Control Inspector with a strong aerospace background. This role inspects incoming sheet metal parts, machined components, and raw materials, reviews Certificates of Conformance (CofCs), and performs final shipping inspection for aerospace customers and outside process vendors. Responsibilities: * Shipping and Receiving: Receive aerospace sheet metal and machined parts, verify counts, and update ERP/MRP system. * Incoming Inspection: Perform dimensional and visual inspections to AS9100 and customer specifications using calipers, micrometers, height gauges, and thread gauges. * Documentation Review: Verify supplier CofCs, material certifications, and other aerospace quality documents. * Final Inspection & Packaging: Inspect completed aerospace components before shipment to customers and vendors. Package per aerospace packaging standards (Boeing D6-51991, Lockheed Martin). * CMM Operation: Operate FARO and Hexagon portable CMM arms (preferred). * AS9102 Reporting: Create AS9102 First Article Inspection Reports (FAIRs) and other quality documentation (preferred). * Compliance: Follow ITAR/EAR export control requirements for aerospace parts. * Logistics Support: Coordinate shipments, schedule pickups, and operate forklift/pallet jack. Qualifications: * 3+ years of experience in aerospace quality inspection, shipping, and receiving. * Strong knowledge of AS9100 quality standards. * Ability to read and interpret aerospace blueprints, drawings, and specifications. * Skilled in inspection tools: calipers, micrometers, height gauges, thread gauges. * Experience with ERP/MRP systems (JobBOSS, Epicor, SAP). * Experience with FARO/Hexagon CMM arms and AS9102 FAIRs a plus. * Forklift certification a plus. * U.S. Citizenship required (ITAR). Benefits: Competitive pay, health/dental/vision, 401(k) with match, PTO, and paid holidays. Company DescriptionSteeldyne Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products. Servicing OEM's and end-users in the following industries: Aerospace Medical Defense Packaging Building Materials & Construction Electrical Equipment & Electronics Commercial Display Oil & Gas Transportation Heating & Cooling Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products.\r\n\r\nServicing OEM's and end-users in the following industries:\r\n Aerospace\r\n Medical\r\n Defense\r\n Packaging\r\n Building Materials & Construction\r\n Electrical Equipment & Electronics\r\nCommercial Display\r\n Oil & Gas\r\n Transportation\r\n Heating & Cooling\r\n\r\n\r\n

Job DescriptionJob Requirements Minimum Qualifications: • High school diploma or equivalent (preferred), • Must be at least 18 years old, • Ability to lift and handle up to 50 lbs safely with proper technique, • Must be able to stand, bend, and move throughout scheduled shifts, • Reliable transportation and consistent attendance, • Must be available to work weekends, holidays, and peak business periods Preferred Experience: • Previous experience in warehouse, logistics, or event rental industry, • Familiarity with handling inventory or equipment, • Basic use of dollies, hand trucks, or pallet jacks (certification is a plus) Key Competencies: • Able to work efficiently in a fast-paced environment while maintaining safety and accuracy, • Quick learner who can follow instructions and adapt to changing tasks, • Strong multitasking and time management skills, • Detail-oriented and organized, • Works well independently and as part of a team, • Good verbal communication and a positive, professional attitude Responsibilities: • Load, unload, and organize event rental items (tables, chairs, linens, etc.), • Clean and inspect equipment before and after use, • Maintain warehouse cleanliness and order, • Follow all company safety protocols and procedures at all times, • Participate in basic maintenance and care of tools and equipment, • Assist with deliveries and customer pickups as needed

Job Description Skilled Painters Wanted for Steady Commercial Work COMMERCIAL PAINTING EXPERIENCE REQUIRED Cal Spectrum Painting is looking for experienced commercial painters who can hit the ground running. If you know how to prep, brush, roll, spray, and stay productive on site — we have consistent work ready for you. We’ve been operating since 1994 and focus on large-scale commercial remodels across the U.S. This is a hands-on job that requires real field experience, a strong work ethic, and the ability to adapt to different job sites and crews. What You’ll Do * Perform interior and exterior painting on commercial projects * Prep surfaces: masking, sanding, patching, and cleaning * Apply coatings using brush, roll, and spray equipment * Work with your crew to meet deadlines and maintain site standards * Contribute to cleanup, site setup, and breakdown * Support occasional specialty coatings or graphics work (when required) Requirements * Solid field experience in commercial painting * Proficiency in brush, roll, and spray techniques * Valid driver’s license and reliable transportation * Able to work on rotating job sites with changing crews * Must bring paint-appropriate clothing (tools provided on site) * Open to California Jobs or Travel availability up to three weeks at a time (for travel crews) * Open to background checks and drug testing, if requested Why Work With Us * Competitive pay based on experience and reliability * Travel jobs include full support: flights, hotels, stipends, gas, and vehicle * Steady pipeline of commercial work across California and beyond * Straightforward team culture — show up, do the work, and get paid on time * Opportunities to take on more responsibility depending on performance Travel Perks (For Travel-Based Crews) Please note: These benefits are only provided for projects that require travel. Not all job sites qualify. * Paid flights or transportation to job sites * Hotel accommodations provided * Daily food stipend * Gas covered * Company vehicle for job-related travel Company DescriptionCal Spectrum Painting is a family-owned commercial painting company founded in 1994. Based in California, we lead large-scale remodel and renovation projects across the U.S. We’re currently building crews of dependable, hard-working painters — from those new to the trade to experienced professionals ready to lead.Cal Spectrum Painting is a family-owned commercial painting company founded in 1994. Based in California, we lead large-scale remodel and renovation projects across the U.S. We’re currently building crews of dependable, hard-working painters — from those new to the trade to experienced professionals ready to lead.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off Position Overview A successful Fire Restoration Technician monitors, inspects and completes tasks for restoration jobs to ensure completion of drying, demolition, pack-out of contents and various fire restoration activities. The Fire Restoration Technician prepares and reviews documentation to include notes, photos and documents according to company policies and procedures to ensure reimbursement from insurance companies, as well as explains processes used to complete active jobs and next steps to resolution in person to customers. Job Responsibilities • Retrieves work orders, ensures appropriate equipment and supplies are loaded on truck needed for job, arrives to work site., • Explain processes used to complete active jobs and next steps to resolution in person to customers using printed materials as a guide with or without supervisor, • Completes assigned jobs according to company processes while maintaining quality control on each job with urgency, • Performs fire/smoke damage repair and tasks to include water extraction, pack-out of contents, removing/disposing of non-salvageable materials, light construction and demolition as directed by supervisor, • Ensures equipment, supplies, vehicles, and products are properly handled. Reports any equipment malfunction and or damage to supervisor, • Inspects jobs after completion and obtains customer signatures for approval purposes, and requests payments when necessary, • Responsible for making daily adjustments to the drying plan based on meter readings, • Inspects jobs after completion and obtains customer signatures for approval purposes, and requests payments when necessary, • Resolves issues with customers, communicates customer issues, daily job activities with supervisor and key company staff, • Prepares documentation and pictures according to company policies and procedures to ensure reimbursement from insurance companies Job Requirements • High school graduate or equivalent, • Experience in the restoration or construction industry is preferred, but not required, • Valid Drivers License and satisfactory driving record, • Good verbal and written and communication skills, • Good problem solving and customer service skills, • Knowledge of disaster restoration industry, • Must be able to prioritize activities and meet deadlines, • Experience with entering data using a tablet or mobile phone, • Report to work on time in a clean, complete uniform, • Read and follow product label usage instructions, • Certifications are preferred, but not required:, • FSRT Fire & Smoke Restoration Technician, • OCT Odor Control Technician Physical Demands and Working Conditions The physical demands are representative of those that must be met by an employee to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Incumbent must be prepared to: • Move up to 70 pounds often, by lifting, carrying, pushing, pulling, or otherwise repositioning objects., • Must be able to stand and walk for extended periods of time. Lifting, squatting, crawling and crouching is required., • Express or exchange ideas with others and receive and act on detailed information given., • For safety reasons, respirators, which are used in certain situations, must be able to seal to your face., • Inside and outside working conditions: The change of environment such as with or without air conditioning and heating. Disclaimer The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. The Company reserves the right to modify this description in the future, with or without notice to the employee. This Job Description does not create an employment contract, implied or otherwise, and employment with the Company remains at will. These responsibilities are subject to possible modification to reasonably accommodate individuals with disabilities.

Job Description POSITION SUMMARY: Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material., • Applies paint to parts as directed by job orders., • Identifies and coats areas that are inaccessible to hand sprayer., • Identifies problems with equipment and will troubleshoot or repair paint guns., • Responsible for running ovens as needed., • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product., • Completes necessary paperwork., • Works closely with the production team and assist as needed., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English., • Basic math skills., • Experience using and troubleshooting gravity spray gun., • Previous experience in aerospace industry or automotive repair, a plus., • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time, • Ability to lift up to 30 lbs, • Exposed heat, noise and chemical fumes while in production areas, • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 5:00AM -1:30PM

Job DescriptionSalary: $25 $35 hourly DOE IMMEDIATE EMPLOYMENT • Compensation: $25 $35 hourly DOE About Us Founded in 1980 in Huntington Beach, CA, Pyro-Comm Systems, Inc. has grown into one of Californias premier fire alarm and low voltage contractors. With over four decades of proven expertise, we proudly serve clients from our offices in Irvine, Carlsbad, and the San Francisco Bay Area. We specialize in design, engineering, and installation of Fire/Life Safety, Security Intrusion, Voice & Data, CCTV, Access Control, and more. Our reputation is built on a foundation of quality, customer satisfaction, and a team of dedicated professionalsmany of whom have over 20 years of service with the company. Position Overview We are seeking an experienced Fire & Sprinkler Inspection Technician to join our Irvine team. This role is ideal for a detail-oriented professional with NICET certification and a proven background in sprinkler and fire system inspections. The technician will perform inspections, ensure compliance with NFPA and local codes, and maintain excellent communication with clients and internal teams. Key Responsibilities • Conduct inspections and testing of fire alarm systems and fire sprinkler., • Ensure compliance with NFPA codes, local regulations, and industry standards., • Document inspection results and prepare detailed reports., • Coordinate with clients, contractors, and internal teams regarding inspections and findings., • Identify deficiencies and recommend corrective actions., • Maintain up-to-date knowledge of industry codes, standards, and best practices., • Assist with troubleshooting and minor maintenance of fire systems as needed. Qualifications • NICET Certification in Fire Protection and Sprinkler Systems (required)., • 35 years of experience in fire system inspections or related field., • Strong understanding of NFPA standards, codes, and inspection procedures., • Excellent written and verbal communication skills., • Ability to work independently and manage multiple inspection projects., • Valid drivers license and reliable transportation. Why Join Pyro-Comm Systems, Inc.? • Competitive wage based on experience., • Comprehensive benefits package including Medical, Dental, Vision (employee contributions required), Basic Life/AD&D and Long-Term Disability Insurance (employer-paid), and FSA, HRA, and HSA options., • Paid time off vacation, paid holidays (no waiting period), and CA PSL, • Opportunities for professional development and certifications., • Supportive team environment with experienced industry professionals., • Work for a respected company culture with over 40 years of proven expertise built on teamwork, integrity, and strong client reputation. Ready to Build Your Future with Us? Join our team as a Fire & Sprinkler Inspection Technician and grow your skills while helping keep our service operations running smoothly. Apply today and start your career with a company that values expertise, innovation, and dedication Pyro-Comm Systems, Inc. Empowering Safety. Enabling Innovation. Pyro-Comm Systems, Inc. is an equal opportunity employer. All qualified candidates will be considered regardless of race, color, religion, national origin, sex, genetic information, age, disability, or veteran status

Job DescriptionA Day in This Role You arrive to a high-mix, fast-moving shop and jump straight into a changeover on a Swiss-type lathe. You load the program, dial in offsets, mount collets and guide bushings, and run a first-article. With the blueprint and GD&T in hand, you verify features to tight tolerancesoften down to a few tenthsusing micrometers, calipers, pin gauges, and height gauges. Once the process is locked, you keep production steady while collaborating with programming and quality to squeeze cycle time, extend tooling life, and safeguard part quality for aerospace, defense, and commercial customers. What Youll Handle • Set up, operate, and troubleshoot Swiss-type CNC lathes (e.g., Tsugami, Hanwha) in a job-shop setting., • Load programs, adjust offsets, install and fine-tune tooling/collets/guide bushings., • Execute frequent changeovers; complete first-article inspections and maintain capability across small- and large-volume runs., • Read and interpret blueprints and GD consistently hold tight tolerances down to a few tenths as required., • Perform in-process inspections with micrometers, calipers, pin gauges, and height gauges; document results according to AS9100/ISO/ITAR practices., • Partner with programming and quality teams to optimize cycle time, tooling life, and part quality; assist with basic preventive maintenance.What Youll Bring, • 3+ years of recent CNC Swiss experience with proven setup capability (beyond basic operation)., • Strong blueprint reading and GD&T skills; proficiency with inspection tools and first-article documentation., • Comfort working within an AS9100/ISO 9001; ITAR-regulated environment., • Track record of managing multiple daily changeovers while meeting production and quality goals.Nice to Have, • Familiarity with Fanuc controls; experience with bar feeders, sub-spindles, live tooling, and high-pressure coolant., • Background in aerospace/defense or medical device machining; SPC knowledge.Pay & Schedule, • Hourly range: $24$30/hr DOE. Full-time. Overtime as needed.Benefits, • Medical, dental, vision, life insurance, paid time off, retirement/401(k).Work Location, • On-site in Orange, CA 92865.

Job DescriptionSalary: 17.50 Puesto de Limpieza Vespertino Medio Tiempo Irvine, CA Ubicacin: Irvine, CA (2025 Alton Pkwy) Horario: Lunes a Viernes | 6:00 PM 10:00 PM Sueldo: $17.50 por hora Sobre la Oportunidad En Juniper Cleaning estamos contratando a un(a) Tcnico(a) de Limpieza confiable y detallista para un puesto de medio tiempo por las tardes en Irvine. Este trabajo es ideal para personas que buscan un horario fijo, disfrutan de mantener espacios limpios y se sienten orgullosas de hacer un buen trabajo. Tareas Comunes (incluyen pero no se limitan a): • Limpiar y desinfectar las reas asignadas, • Limpieza general de oficinas, salas de descanso, salas de juntas, recepciones y entradas, • Quitar el polvo de cubculos, muebles, escritorios y gabinetes, • Vaciar botes de basura y desechar la basura correctamente, • Barrer, trapear y aspirar pisos, • Reabastecer suministros en baos y cocinas, • Seguir los procedimientos de la empresa en cuanto a seguridad, asistencia, uniformes y cierre de reas, • Operar y dar mantenimiento bsico a equipos de limpieza como aspiradoras, • Capacidad para trabajar de manera independiente y en equipo, • Atencin al detalle y compromiso con la calidad, • Puntualidad y confiabilidad, • Capacidad para cargar hasta 17 kg (38 lbs), • Estar de pie durante todo el turno (incluye caminar, agacharse, arrodillarse, girar, empujar, etc.), • Mantener una actitud positiva y profesional, • Odias llegar tarde o faltar al trabajo, • Te enorgullece dar un esfuerzo extra y que lo reconozcan, • Necesitas supervisin constante o te cuesta trabajar de manera independiente, • No sabes usar un smartphone o enviar mensajes de texto, • Sueles llegar tarde, faltar a tus turnos o poner excusas por errores

Job DescriptionDescription: Air Treatment Corporation is a dynamic, collaborative work environment. We understand the expectations of high–quality customer service, therefore we actively search and promote a cohesive team that is formulated to exceed expectations. We are devoted to the growth of our employees and look to provide opportunities for advancement from within. Responsible for overseeing, maintaining, and repairing all Air Treatment commercial HVAC equipment. This includes repairing, rebuilding, and replacing bearings, motors, heat exchanges, air conditioning compressors, boilers, ventilation, and air conditioning systems with a special emphasis on Central Plant solutions that include chillers containing Turbocor magnetic bearing technology; monitoring and maintaining truck inventory and tools. Finally, the applicant should be self-sufficient with a strong eye towards detail and documentation of work done.Requirements: Duties/Responsibilities: • Perform equipment startup including detailed documentation and document management., • Analyze, troubleshoot, install, repair, rebuild, adjust, and replace mechanical equipment including but not limited to bearings, motors, heat exchanges, air conditioning compressors, water and pneumatic valves, humidity control units, and complex integrated control systems., • Provide technical training and guidance, while assisting technicians in troubleshooting systems., • Monitor and maintain safety practices to ensure procedures are followed., • Oversee, analyze, troubleshoot, install, repair, rebuild, replace, and adjust pneumatic, electrical, and electro-pneumatic and digital control systems., • Query and monitor control systems as they relate to building automation, energy management and preventative maintenance operations. Work with System Integrator to integrate ATC equipment into the onsite BAS., • Interface with customers, sales engineers, construction and facilities personnel on projects, new construction, and equipment startup jobs., • Investigate related complaints and recommend solutions., • Perform acceptance inspections of new equipment installations and startups., • Assist in the research and make recommendations for changes to factory or site-specific technical specifications., • Respond to customer emergencies., • Advanced troubleshooting and repair on HVAC/R systems required., • Advanced mechanical skills and ability to read and understand blueprints and schematics., • Ability to analyze all elements and dimensions of complex systems, isolating variables; identifying and evaluating alternatives; resourceful and innovative when arriving at a timely solution., • Advanced knowledge of HVAC/R systems and component level diagnostic skills., • Requires minimal supervision maximizes resources/technology to reach solutions., • Strong documentation and organizational skills a must., • Knowledge of 460-volt, AC/DC circuit and advanced troubleshooting skills preferred at hire., • Strong understanding of MODBUS and BACnet protocol and integration is a plus., • High school diploma or equivalent, • Vocational, trade school, or short-term course work in HVAC/R or a related discipline., • Requires formal training in four of the following areas: chillers, cooling towers, boilers, furnaces, refrigeration, or air conditioning equipment, • More than five years of experience in HVAC/R maintenance and repair., • Valid Driver’s License, • EPA 608 Universal Certification required.

Job DescriptionSalary: Based on experience Turtle Rock Preschool, a premier NAEYC-accredited school, has an immediate opening for a skilled and dependable Handyman (male or female) to join our team and help keep our campus in excellent condition. Candidate must possess the ability to educate and care for children of various ages while maintaining a structured and safe environment. Candidate must be comfortable working with others as well as speaking to parents. Responsibilities: • Perform general maintenance and repairs throughout the school (indoor and outdoor areas), • Handle minor plumbing, electrical, painting, and carpentry tasks, • Assemble furniture and playground equipment as needed, • Perform routine facility inspections and preventative maintenance, • Coordinate with vendors for specialized repairs or maintenance services, • Maintain tools, equipment, and work areas in clean, safe condition, • Support the administrative team with maintenance-related requests Job Requirements: • Clean background check, • Reliable transportation, • Ability to work on short notice This is considered a part-time / contract position, requiring flexibility in hours. We estimate 5-20 hours per week.

Job DescriptionSalary: 100-120K Bogart Constructions Lead Estimator is responsible for generating and managing estimates for bidding efforts while providing leadership, training, and mentoring estimators under the Estimating Manager. Responsibilities / Duties: • Assist the Estimating Manager in reviewing plans and specifications, • Perform accurate quantity take-offs for all scopes for all trades (div.2-div.16), • Generate and prepares GMP, scopes, estimates, and budgets., • Develop subcontractor relationships., • Effective in preliminary estimate pricing, building systems, constructability, etc., • Bid day support: qualifying subcontractor bids and reviewing overall bid with Estimating Manager, • Ability to read and understand all plans and specs., • Mentor and develop Estimators., • Visits project sites for evaluation of construction means and methods. Required Skills: • BS degree in one of the following - Business, Engineering, Construction or Architecture, • Ability to communicate in English both verbally and in writing., • Excellent in Excel, Projects, MS Word, MS Outlook, • Minimum 3-5 years experience in estimating/construction, • Strong analytical skills with the ability to read and understand plans, specifications, lease exhibits, landlord requirements, work letters etc., • Highly organized, efficient, motivated, ethical, entrepreneurial spirit, • Fosters a creative and enthusiastic can do attitude., • Work well under pressure, especially when faced with unexpected occurrences and delays., • Familiarity with computers & software programs for Job Costing, tracking reports, scheduling, and estimating., • Ability to coordinate several tasks at once while resolving specific problems. Benefits: • Health, • Dental, • 401K

Job DescriptionSalary: $75K-$95K BOE TABER, the leading manufacturer of custom millwork, metalwork, and upholstery in Orange County, is seeking an Estimator to join our growing team. The ideal candidate will have a strong background in the architectural millwork industry, possess strong analytical, be a self-starter, have strong problem-solving skills, great attention to detail, and the ability to work in a fast-paced deadline driven environment. You will be responsible for providing accurate and timely proposals for custom millwork projects. Your projects will be amongst some of the largest and most preeminent ones in Southern California, and you will be working with many of the biggest contractors and sophisticated owners and architects. Are you ready to Be Awesome? We have a strong Estimating Department and we are looking to expand. We are willing to train and mentor anyone qualified for the position. Job Overview: • Review project documents, plans, and specifications to determine project requirements., • Develop and maintain relationships with subcontractors and vendors., • Assist on change order review and cost impacts upon request from Estimating Manager. Qualifications: • At least 5 years of experience in estimating custom millwork projects., • Strong knowledge of millwork materials, methods, and processes., • Ability to read and interpret construction documents and plans., • Excellent analytical and problem-solving skills., • Strong computer skills, including experience with estimating software., • Excellent communication and interpersonal skills., • We offer a competitive compensation package which includes:, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Paid Time Off, • 401(k) Plan with Company Sponsored Match About TABER: Our company manufactures custom commercial millwork for renowned spaces in the greater Orange County, Los Angeles, and San Diego areas. We offer competitive pay and benefits, a positive and collaborative work environment, and the opportunity to expand your skills and excel. This position will be an on-site position based out of our new state-of-the-art facility in Irvine where we build complex projects for some of the most leading contractors and prominent architects in the industry. Our clients and employees are at the heart of everything we do. We recognize that true impact happens beyond the work itself; its about the people behind it. We know that trust is earned, and impact is possibleby listening first, embracing new perspectives, and always having humility. Making it a priority, we ensure that each of our employees has ample space for hands-on opportunities, fostering a challenging, dynamic, and rewarding career. THIS IS AN ONSITE POSITION. No agencies and local candidates only. Due to the high volume of candidates, we are unable to respond to all inquiries.

Job Description The Estimator is responsible for preparing accurate and competitive cost estimates for building automation and control system projects. This position requires strong analytical skills, technical understanding of HVAC control systems, and close collaboration with Sales, Engineering, and Operations to ensure all estimates align with project requirements and company standards. Key Responsibilities • Review and analyze construction plans, specifications, addenda, and related documentation to understand project scope and requirements., • Develop detailed cost estimates for Building Management Systems, including materials, labor, subcontractor services, and equipment., • Perform takeoffs from drawings and identify all control devices, wiring, panels, and associated components required for system installation., • Create preliminary layout and system design concepts to ensure proposed solutions meet project and client needs., • Collaborate with Sales Executives to support bid strategies, clarify scope, and provide technical input during the sales process., • Prepare and deliver clear, comprehensive technical and commercial proposals outlining scope of work, assumptions, and exclusions., • Work closely with Operations and Engineering teams to ensure estimates are accurate, achievable, and aligned with execution capabilities., • Analyze historical data, productivity metrics, and vendor quotes to refine cost models and improve estimating accuracy., • Evaluate and pre-qualify new opportunities to ensure alignment with business goals and profitability targets., • Attend pre-bid meetings, site walks, and technical reviews as needed to gather relevant information for accurate estimating., • Participate in internal sales meetings and training seminars to stay current on product offerings, pricing, and market trends., • Proven experience in BMS, building automation, electrical, or mechanical estimating., • Ability to interpret mechanical, electrical, and control drawings., • Proficiency with estimating tools, Excel, and CRM systems., • Strong analytical, organizational, and communication skills., • Collaborative mindset and attention to detail. Pay Rate: $50-55/hr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match

Job Description Axis Mechanical is looking to find someone to join our team who has a interest in working in the mechanical trades. Applicants shouldbe mechanical inclined but we are willing to train anyone who may be interested. Applicants must posses a current Driver's License. We offer competitive rates, health insurance, paid time off and holidays.

Job Description Now Hiring – Full & Part-Time | Multiple Shifts Available Are you passionate about helping others and confident in taking charge during critical moments? We're looking for compassionate, quick-thinking individuals who can independently manage and treat minor injuries in fast-paced industrial settings. As part of our team, you will: • Respond to injury calls via our dedicated hotline and provide prompt triage, • Conduct telemedicine consultations to assess and advise injured workers, • Travel to job sites to deliver on-site care, following OSHA First Aid Guidelines, • Focus on delivering quality injury care with the goal of treating as many injuries on-site as possible Benefits • Hourly compensation (Full Time & Part-Time), • Training & Development (Full Time & Part-Time), • Health & Wellness Credit (Full Time & Part-Time), • Employer-Sponsored Health Care Plan (Full-Time Only), • Retirement Plan with a 5% match (Full-Time Only), • Flexible Paid Time Off (Full-Time Only), • Mileage Reimbursement (when applicable) Please Note: We are not accepting unsolicited inquiries from recruiters, staffing agencies, or headhunters at this time. Our hiring team is dedicated to engaging directly with candidates and managing all recruitment efforts internally. We appreciate your understanding and cooperation. Responsibilities We’re Seeking EMTs, CNAs, LVNs, or individuals with strong medical experience who are confident in delivering independent, professional first aid care. All new team members will complete a comprehensive training module to ensure a clear understanding of OSHA-compliant workplace injury treatment protocols. Job Responsibilities Include But Are Not Limited To: • Cleaning minor cuts, scrapes, or scratches, • Treating minor burns, • Applying compressive bandages and dressings, • Recommending the use of non-prescription medicine, • Draining blisters, • Removing debris from the eyes, • Massaging muscle strains, • Preferred: Bilingual (Spanish), • Valid licensure or certification for the position you’re applying for, • Excellent verbal and written communication skills, • A passion for people and delivering the best care possible, • Ability to work both independently and collaboratively, • Positive, outgoing personality with strong time management skills, • Valid driver’s license and reliable transportation (travel up to 2 hours may be required), • Physically able to lift a 50lb emergency response bag, • Accurate and timely documentation of all findings and treatments, • You are comfortable working in different environments, • You have relevant occupational health experience $23 - $26 hourly About Whiteboard Risk & Insurance Solutions Who We Are: We are a modern commercial insurance agency with a very unique platform of services that helps businesses that struggle with workers ' compensation injuries. We've spent the last ten years honing our niche and developing a highly unique product that drives unrivaled results for clients. We solve challenges that business owners typically don't even know exist until they meet us. It makes it difficult to get our foot in the door - but once we have the opportunity to educate them on Workers' Comp and how our platform resolves a number of common problems with their insurance, most of them wish they'd heard of this much sooner! Benefits: • Competitive Compensation, • Monthly Health & Wellness Credit, • Employer-Sponsored Health Care Plan, • Retirement Plan with a 5% match, • Flexible Paid Time Off WfaUl2kFRu

Job Description Are you ready to lead with precision, start your day from home, and make a real impact in fire safety across Southern California? Fire Testing Solutions in Tustin, CA is hiring a full-time Lead Fire Alarm Technician, and this isn't your average field role. If you're a seasoned technician who thrives in the field and enjoys leading a crew, we want to hear from you! As our Lead Fire Alarm Technician, you'll earn $35–$45/hour with overtime opportunities. You'll also enjoy a take-home vehicle, allowing you to dispatch directly from home. We support your growth with license assistance and advancement opportunities. Benefits: • Dental, vision, and health insurance, • 401(k) with company match, • Bonus structure, • Company phone and vehicle, • PTO, • Uniforms THE TYPE OF CANDIDATE WE'RE LOOKING FOR We're seeking a reliable and skilled leader who's ready to take ownership of their work and elevate our team. Our ideal candidate exhibits the qualifications listed below: • 5+ years of fire alarm field experience, • Proven ability to lead a crew, • Experience with conduit bending and blueprint reading, • Good driving record If you can meet the requirements above, keep reading to learn more about this position! YOUR DAY-TO-DAY AS A LEAD FIRE ALARM TECHNICIAN This is a full-time position, Monday–Friday, with shifts starting between 4 AM and 6 AM, and running from 7 AM to 4 PM. Daily travel to job sites is required, with no central reporting. In this role, you'll begin your day at home before heading to job sites in Orange, Riverside, San Diego, and Los Angeles Counties. You'll lead a team in installing, maintaining, and repairing fire alarm systems, bending conduit, and interpreting blueprints, while ensuring precise inspections and documentation. You'll be the on-site expert, delivering top-notch service and prioritizing safety. ABOUT US At our company, we specialize in providing reliable, cutting-edge fire safety solutions across Southern California. Our team is results-driven, team-oriented, and transparent, creating an environment where dedication and excellence are celebrated. We care deeply about our people-sharing profits, offering growth opportunities, and fostering a supportive atmosphere. With perfect retention for employees who stay beyond their first year, we're more than just a workplace; we're a family committed to success and innovation. We hope you'll join us! TAKE THE NEXT STEP Join a team that values your expertise, supports your growth, and provides the opportunities you deserve. Our initial application process is quick, easy, and mobile-friendly. Apply now! Job Posted by ApplicantPro

Job DescriptionDescription: Join SOLID Surface Care where you can become a Craftsman! Position: Floor Technician Location: Santa Ana, CA Job Type: Full-Time About SOLID Surface Care, Inc. Established in 1996, SOLID® Surface Care is a pioneer in facility care, standing as the largest self-performing facility care company in the US. We're recognized for our innovative cleaning methods, disinfection expertise, and exceptional specialty surface care. Our commitment to sustainability, environmental responsibility, and extending surface life makes us industry leaders. At SOLID, we prioritize our team's growth, offering numerous opportunities for professional development and advancement. Why SOLID? • Environmentally-Conscious: We're passionate about green methodologies., • Career Growth: Offering challenging roles and clear advancement pathways., • Employee Well-being: Competitive benefits (health, dental, vision, life insurance, 401k, paid holidays & paid time off), flexible schedules, and an open-door culture., • Learning & Development: Regular training opportunities to hone your skills. What Will You Do? As our Floor Technician, you will be instrumental in delivering top-notch maintenance cleaning services, working on some of the most prestigious commercial facilities in the nation. Here's a glimpse into your daily responsibilities: • Master the art of cleaning and restoring various surfaces: carpet, upholstery, stone, metal, tile, grout, vinyl, wood, concrete, and more., • Collaborate with the Shift and Crew Leaders, utilizing SOLID's state-of-the-art equipment and methods., • Ensure all equipment, vehicles, and workspaces are tidy and well-maintained., • Comply with all safety guidelines and equipment operating procedures., • Be open to travel, both for client jobs and training events. Who Are We Looking For? Candidates who have: • A penchant for detail, with a craftsman's touch., • A cooperative spirit and excellent communication skills., • The grit to work under pressure and meet set goals., • Strong ethical standards, showcasing high integrity., • Multi-tasking abilities, coupled with deadline-driven work ethics.Requirements:, • Successful experience in cleaning and restoring floor coverings (preferred)., • Eligible to work in the US., • Reliable off-shift transportation to the office., • Basic computer proficiency., • A clean background, as required by many of our esteemed clients. Physical capability to: • Walking & standing (6-8+ hours), • Bending (3-6 hours), • Squatting (up to 3 hours), • Lifting (26-50 lbs.) SOLID Surface Care, Inc. is an equal opportunity employer, committed to fostering an inclusive, diverse environment for both our team and our services. Elevate your career with SOLID – where every surface and every employee shines!

Job Description Duration: 6 months contract with extension 1st or 2nd Shift Job description: Position Overview: The Crimping Department position works with their hands on small, detailed projects and products, production assembly, detail-oriented machines making small parts and assists with minor/miscellaneous tasks as requested. Responsibilities: • Perform equipment setup, operation, minor repair, and basic daily preventative maintenance tasks to meet all standards for safety, quality, and efficiency. These tasks must be completed under minimal supervision., • Maintain machine raw material feeds, perform any fault clearing and clear stoppages on automated equipment., • Utilize human machine interfaces (HMIs) to identify and correct shifts in process control., • Ensures adequate raw material is prepared correctly and jobs are run in a timely manner to ensure on-time delivery. Troubleshoot and identify potential solutions using a troubleshooting table for mechanical errors or safety issues., • Able to utilize computer systems to support in the material inventory and quality management processes., • Participates in manufacturing processes to support new product design transfer, process development, equipment validations, and process validations., • Able to use measuring tools to ensure correct tolerances., • Works from specifications, work orders, and general instructions from Production Leads., • Safely follow standard operating procedures including but not limited to material handling, record keeping, packaging, and shipment preparation., • Must follow all Good Manufacturing Practices (GMPs)., • Notifies Team Leader or Production Supervisor of any discrepancies to ensure quality standards and safety of operations are maintained at all times., • Excellent attention to detail, good organization, and capable of working independently with minimal instruction from production supervisor., • Able to work in small groups and cross functional teams to troubleshoot issues, identify and implement collective corrective actions., • Maintain a clean work environment suitable for medical device manufacturing., • Performs other duties as required Education and Experience: Minimum Requirements: • H.S. or Associate degree 2-4 yrs experience Preferred Skills and Competencies: • Familiarity with manufacturing instrumentation such as micrometers, calipers, feeler gauges, dial indicators, and gauge blocks., • Self-starter capable of dealing with a variety of tasks in a fast paced, multi-tasking environment., • Must be proficient in English language to be able to read documentation, communicate, and write., • Ideal candidate will have keen eye for quality, is dependable, and will work collaboratively within a team, and possess a positive attitude., • Manufacturing experience., • Previous experience with discreet assembly and robotics., • Familiarity with manufacturing instrumentation such as optical gauging and video microscopes., • Previous experience with assembling, debugging, and optimizing discrete component assembly processes., • Experience in a start-up production environment is a plus., • Mechanical Aptitude - Knowledge of and experience with automated machines and tools, including design, uses, repair, and maintenance., • Production & Processing - Knowledge of raw materials, measurement instruments, production processes, quality control, and other techniques for the manufacture and distribution of goods., • Mathematics - Knowledge of basic arithmetic, algebra and/or geometry., • Problem Solving - Recognizes problems and understands root cause analysis techniques/concepts. Physical Requirements: • Required to stand for at least 75% of working time per shift, with walking at least 50% of working time per shift. Required to reach above shoulder frequently and below waist occasionally.

Job Description Facilities Maintenance HVAC Technician Reports To: Corporate Director of Facilities Location: Multi-site (Corona HQ + All 7 Hospital Campuses) FLSA Status: Non-Exempt Salary: $68,640 to $108,160 annually Position Summary The Facilities Maintenance HVAC Technician is responsible for the maintenance, repair, and troubleshooting of commercial heating, ventilation, air conditioning, and refrigeration (HVAC/R) systems across KPC Health’s seven hospitals and affiliated buildings in Orange, Riverside, and San Bernardino counties. The technician ensures that HVAC systems operate efficiently, safely, and in compliance with regulatory standards to support critical healthcare environments. Key Responsibilities • Inspect, troubleshoot, and repair HVAC/R equipment including chillers, boilers, air handlers, VAV boxes, exhaust systems, and thermostats., • Perform scheduled preventive maintenance on HVAC systems across all campuses., • Monitor and adjust building automation systems (BAS) to ensure energy efficiency and comfort., • Maintain refrigerant logs and ensure compliance with EPA and Title 24 regulations., • Respond to emergency calls across KPC hospitals and affiliated buildings., • Maintain documentation of inspections, repairs, and system performance., • Supervise temporary HVAC staff or vendors and coordinate outsourced services., • Collaborate with multidisciplinary teams to minimize downtime in patient care areas., • Maintain tools, inventory, and parts for efficient service delivery., • Follow all applicable safety, infection control, and hospital regulatory protocols., • Minimum 3 years of commercial HVAC experience required; healthcare or multi-building experience strongly preferred., • High school diploma or equivalent required., • EPA Universal Refrigerant Certification required., • Valid CA Driver’s License and reliable transportation., • Strong understanding of HVAC codes, safety standards, and control systems., • Familiarity with computerized maintenance management systems (CMMS) preferred.

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: • Set up and operate CNC machines (lathe/mill) in order to meet daily production and quality requirements., • Follow company quality control standards to include in-process inspection and documentation. Education: • High school diploma or General Education Degree (GED) required. Experience: • Must have at least five years of current CNC lathe setup experience., • Formal CNC training experience preferred. Knowledge/Skills/Abilities: • Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings., • Ability to perform routine maintenance and troubleshooting on machines., • Skilled to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves., • Skilled to inspect finished parts using precision measuring tools (calipers, micrometers, etc.)., • Ability to read and interpret engineering prints., • Ability to make decisions, communicate effectively, and work well with others in a team environment., • Must be a quick learner., • Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: • While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas., • The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals., • The noise level in the work environment is usually moderate or loud., • The employee is regularly required to sit and talk or to hear., • The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms., • The employee is occasionally required to stand and walk., • The employee must occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $19 to 22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.1-1

Job Description CertaPro Painters Responsibilities: • Wearing the proper professional Painter attire; white pants or white shorts and a CertaPro Painters shirt., • Keeping in regular communication with your Job Site Supervisor. This includes, but not limited to; know what jobs are next, what to do on days of inclement weather, etc., • Maintaining all equipment., • Dealing with or handling all reasonable requests from the customer., • Take care of all reasonable requests from your supervisor., • Attend all training sessions or company meetings as required., • Make sure you and the Team you are working with follow safe working practices., • Do good quality work and provide excellent service to all customers., • Prepares, primes, sands, seals, patches and paints furniture, surfaces, buildings, and fixtures utilizing all types of painting materials., • Tapes, flushes, repairs and applies texturing, acoustic layers on a variety of surfaces. Adjusts colors when necessary; utilizes enhanced finishing skills when appropriate., • Operates, cleans and maintains all painting equipment, including brush, roll, sprayers and electrostatic sprayers, pumps, etc. Safely stores and labels all materials., • Residential and Commercial Paint Projects

Job Description NOTE: You must read info below. You must be able to read blue prints for all our projects. You must be able to tow trailers. We are OC’s Epic Dad Construction and serve all of the Orange County area. If you are interested in becoming part of the team please keep reading. We are looking for a few additional workers for full time and part time work. We work Mondays-Fridays between the hours of 6 to 5. Usually you will have an 8 hour shift with overtime at times. Yes, overtime which means you are a W2 worker with paid time off. You must be able to work in the United States and show proper documentation. Some weekends are required. We do about 90% residential work and 10% commercial. We are currently seeking tradesmen that have been around for a while and knows how the construction industry works. There is no room for drama or laziness here as we carry 5 to 10 large remodels at a time. We are seeking people who come to work with an employee mindset not a I’ll do what I feel like attitude. With that being said, you need to be a problem solver type and person who takes responsibility ahead of the company’s needs. You’ll need to own plenty of your own gear, tools, and equipment. This includes having reliable transportation that gets you from job to job and can carry tools and supplies. You must be willing to travel to anywhere in OC and sometimes outside of the county. Mileage is paid. Also you must be willing to tow trailers as we own multiple pieces of equipment. We do drug test and background checks so don’t apply if you can’t pass. What we need from you if you’re interested: 1. Send us a paragraph of why you want to work for our company and why you're looking for new work. We look for good writing skills too. Please make sure to message us on indeed.com. Do not call or email us as your request will be ignored., 2. Tell us what your best abilities are and how that can help the company., 3. Tell us about your transportation and tools., 4. Include 3 references and a resume. Make sure not to call asking about the job. That is not how you get hired. Submit your information through indeed.com and we'll begin by contacting you with questions. Must be able to read, write, and speak fluent English. Must be comfortable wearing company uniform (shirts). Must be comfortable using text messages, sending media, and clocking in with GPS time app. Must be able to legally work in the US. No exceptions. Secret word is EPIC. Additional Duty Info: • Perform various construction tasks such as plumbing, electrical, drywalling, and carpentry. This is only to mention a few., • Assist with fabricating and assembling construction materials, • Follow construction plans and instructions provided by construction management, • Maintain a clean and organized work area, • Adhere to safety protocols and wear appropriate personal protective equipment (PPE), • Collaborate with team members to complete projects on time and within budget. Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as assigned to meet the ongoing needs of the organization. Must also be able to lift very heavy equipment and materials. Job Types: Full-time, Part-time Benefits: • 10 hour shift, • 4 hour shift, • 8 hour shift, • Monday to Friday, • On call, • Overtime, • Are you able to tow trailers with your vehicle and move supplies? $30-35 An Hour

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Qualifications: • High School Diploma or GED, • 1 to 2 yrs NDT (Nondestructive Testing) Technician experience, • Mechanical Assembly experience, • Testing and inspection of mechanical components experience, • Hands on engine build experience is desired, • Proficient in MS Office products: Excel, WordResponsibilities:, • Disassembly automotive accessories and engine parts (Teardown), • Nondestructive testing of automotive accessories and engine parts (NDT), • Confirmation of parts mileages and matching to mileage limits for each build/spec., • Responsible for the continuous improvement, • Inter Department cooperation, • Input regarding teardown/NDT tooling

Job Description Quality Technician – Dye Penetrant – $25-$28 /hour **Hours: 1st shift – 6am to 2:30pm** Location: Garden Grove, CA We are looking for a meticulous Quality Technician Dye Penetrant Inspection to perform quality checks on plastic components in a manufacturing setting. This role involves applying fluorescent dye and developer, using black light equipment to detect surface defects, and maintaining accurate inspection records. Key Responsibilities: * Conduct dye penetrant inspections on plastic parts using fluorescent dye and developer * Use ultraviolet (black light) tools to detect and assess surface discontinuities * Maintain detailed and accurate inspection documentation and process records * Perform dimensional inspections using handheld and precision measuring instruments * Interpret engineering drawings, specifications, and inspection criteria * Apply appropriate sampling plans during inspection processes * Support quality functions including:- Receiving inspections • Final and shipping inspections, • Calibration activities, • Material Review Board (MRB) participation, • Laboratory-based material testing Carry out inspections in cleanroom environments, both onsite and at external locations Qualifications: • Minimum 2 years of experience as a Quality Technician or in inspection roles (required), • High School Diploma or GED (required), • Familiarity with ISO 9001 and AS9100 quality standards (preferred), • Skilled in using precision measurement tools such as calipers and micrometers Choose from one of the following application methods: • Call our office at (866) 949-4894 Express works with job seekers to help find the right job for their skills and experience. As one of the leading staffing companies in North America, we’re ready to help you take the next step in your career. Whether you are ready for a full-time position, looking for part-time work, or want a more flexible schedule, Express has a wide range of jobs available including: • Administrative, • Light Industrial, • Skilled Trades You should be proficient in: • Quality Inspection Experience, • Quality Control Experience

Job DescriptionSeeking an experienced lead/foreman to run a new construction crew. Ability to complete installation of all new construction electrical (site lighting) projects, from initial print review/analysis to final inspection and sign off. Essential Functions: • Meet daily with construction manager to receive daily tasks, • Confirm crew and any materials needed for daily tasks needed at each job site, • Oversee crews performance and give direction for successful completion of all required tasks, • Complete all paper work including work orders and any material orders for truck stock, • Arrive onsite, analyze prints and layout crew for work each day, • Meet with Superintendents at job site as needed, • Meet with City Inspectors for construction inspections for newly installed electrical systems, • Maintain communication with Construction Manager throughout day, • Maintain clean and safe truck and work site at all times, • Attend all company mandatory safety meetings, • Form and assist with pouring and finishing all types of cement foundations, • Perform trenching with special trenching equipment., • Perform electrical make up in ground vaults, junction boxes and light fixtures., • Bend and install PVC and EMT conduit proficiently., • Install and perform electrical make up in electrical distribution systems., • Installation of lighting controls including but not limited to Photocells, Time clocks, Contactors, ect., • Understand and implement NEC code at all times., • Other duties as assignedMinimum Qualifications:, • 5 years in a related field or equivalent experience in order to complete the job description above successfully, • Strong communication skills with crew and management of Horizon as well as other trades, clients, etc., • Dig, Build and Lift Heavy materials as needed, • Familiarity with operating mini excavator, skid steer, trenchers, fork lifts, auger. . PShldY6bbM

Job Description Construction Litigation Associate Location: Irvine, California Practice Area: Construction / Surety / Commercial Litigation About the Firm We are a nationally recognized construction, surety, and commercial litigation boutique—ranked by Chambers USA, Legal 500, and Best Lawyers for excellence in construction law. Our Irvine office is part of a collaborative, high-performance team that handles complex disputes across the the U.S. and abroad. At our firm, you’ll have the opportunity to take on substantive responsibility early, contribute to key decisions, and work in an environment defined by passion, expertise, and a resolve to win for clients. Position Summary We are seeking a motivated, analytically sharp Construction Litigation Associate to join our Irvine team. The ideal candidate will be passionate about construction law, eager to dive into complex disputes, and ready to grow within a highly regarded practice. You will support and lead litigation from inception through trial, working on cases involving general contractors, subcontractors, owners, sureties, lenders, and design professionals. Key Responsibilities • Manage all phases of litigation: strategy, pleadings, discovery, motion practice, depositions, and trial preparation, • Draft and respond to complex motions, briefs, expert reports, and technical pleadings, • Analyze contracts, change orders, schedule variances, and cost impacts, • Coordinate with engineers, schedulers, and other technical experts, • Perform legal research on construction, indemnity, bonds, negligence, delay, and related issues, • Mentor junior attorneys and supervise paralegals, • Participate in business development: proposal writing, client meetings, and conferences, • Stay current on developments in construction law, surety law, and related public contract statutes Qualifications & Experience • Juris Doctor (J.D.) from an accredited law school, • Member in good standing of the California Bar, • 3+ to 7+ years of litigation experience (construction-related experience strongly preferred), • Proven track record in drafting motions, managing discovery, handling depositions, and working with experts, • Strong technical aptitude (understanding of construction documents, delay analysis, cost accounting), • Excellent writing, analytical, and communication skills, • Self-motivated with ability to manage multiple matters and deadlines, • Client-service mindset, high professionalism, and commitment to teamwork Why Join Us? • High-impact work — You won’t be stuck doing menial tasks; you’ll get meaningful responsibility from day one., • Mentorship + autonomy — You’ll learn from seasoned construction litigators and have space to lead., • Strong reputation & network — Work on high-stakes cases with national reach and visibility in the construction bar., • Collaborative culture — A collegial, open environment where ideas are valued and initiatives are welcomed., • Competitive compensation & benefits — You’ll receive a market-leading salary, bonus potential, health benefits, and support for CLEs and professional development., • Location benefits — Based in Irvine, with excellent access to Southern California’s legal, engineering, and construction sectors. How to Apply Please submit: • A cover letter (why this practice, why this firm), • Your résumé / CV, • A writing sample (e.g. motion, brief, or legal memo) All applications will be reviewed confidentially.

Job Description PRIMARY PURPOSE OF JOB: Process orders of parts through nital etch/temper etch/ammonium persulfate etching operations per shop traveler requirements and interpret results of testing. PRINCIPAL DUTIES/KEY RESULTS REQUIRED: • Rack and prepare parts for processing through the nital etch line, • Prepare parts for nital etch processing by abrasive blasting and glass bead cleaning, • Interpret accurate results from the nital etch process, • Recognize real and false indications and be able to distinguish between, • Report results of testing on shop traveler, • Package and prepare parts for embrittlement relief following nital etching, • Perform other duties as assigned by foreman. WILL ACT AS BACK UP FOR THE FOLLOWING: MAG General Helper I, II, and III SUPERVISION OF OTHERS: Only as needed to prepare parts for processing and post-processing bake operation. POSITION REQUIREMENTS: • Ability to speak, read, write, and understand the English language., • Ability to follow written instructions, specifications, and procedures., • Ability to understand basic drawings and sketches., • Pass an annual vision test consisting of ability to read Jaeger #1 at a distance of at least 12 inches., • Pass written and practical examinations on an annual basis with a score of at least 80 percent., • Have no physical limitations that would interfere with ability to lift, carry, and suspend parts on hooks, racks, and baskets during the processing and examination of parts., • Ability to work around hazardous chemicals and loud noises., • Knowledge of safety laws and issues We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description We are a Biomedical Repair Facility in Irvine, CA. We are looking for a Technician with experience in the repairs of bedside patient monitoring devices. This is a full time position Monday through Friday. This candidate would specializes in Board Level repair and Circuitry, Soldering experience and the ability to trouble shoot issues. Company DescriptionMedical Monitoring Equipment and DevicesMedical Monitoring Equipment and Devices

Job DescriptionJob SummaryWe are seeking a highly motivated and energetic Outside Sales Representative to join our team. In this role, you will generate leads, attract new clients, and close deals. Your responsibilities will include creating and submitting sales reports, building rapport with new and existing customers within your territory, evaluating their needs, and negotiating successful deals. The ideal candidate has an outgoing personality, exceptional customer service and negotiation skills, and a strong desire to close deals. Responsibilities • Develop rapport and build relationships with existing and potential customers, • Travel to appointments and meetings with potential and existing customers within your territory, • Meet or exceed designated sales targets, • Create and implement an effective sales strategy, • Document all leads, sales, and customer interactions in customer relationship management (CRM) program, • Use best practices in negotiation and sales techniques to close sales Qualifications, • Experience selling to Property Managers, HOA and Apartment communities required, • Strong hustler / farming/ prospecting skills required, • Excellent negotiation and customer service skills, • Strong written and verbal communication skills, • A positive attitude and ability to be persistentBenefits/Perks, • Competitive Compensation base, • Strong uncapped commission structure, • Company paid vehicle, • Fast paced work environment

Job Description At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We are currently hiring a Technical Associate V - Manufacturing for our sunny Irvine, California site. We are looking for dynamic, inspiring, inclusive team members who collaborate with others, knowing that diverse talent, skills, and perspectives lead to better outcomes. Alcon manufacturing is a fast paced, high-energy environment so naturally we are looking for someone who is a relationship builder, an excellent analytical thinker, intuitive to business needs, and someone who can effectively communicate in challenging situations creating win-win scenarios. Above all we are looking for someone with a passion for customer service and helping Alcon in our mission to help everyone see brilliantly! A Day in the Life: As a Technical Associate V - Manufacturing, you are responsible for unleashing the full potential of our people and culture while simultaneously achieving timely and cost-effective manufacturing of high-quality medical devices. This position performs highly skilled tasks in multiple areas across the line or lines demonstrating teamwork with consistent and sustained quality. • Set up and align photonics laser systems according to technical specifications and blueprints., • Adjust laser settings to ensure optimal performance and precision., • Set up, load materials, and run a variety of manufacturing equipment to produce device components and/or sterile finished products, including equipment set-up and/or in-process adjustments to ensure appropriate settings and parameters to achieve product design and quality specifications., • Perform inspections of machinery and output ensuring the processes are being completed in conformance with production specifications and maintain a stable and efficient process., • Use tools and equipment to complete assembly, sophisticated testing tasks, and measurements of medical devices precisely following work order instructions and drawings., • Perform quality assurance and reliability testing following established methods and procedures., • Self-assess and troubleshoot work, which may include visual inspection under magnification, sequential review of own or colleagues' work, reworking assemblies as required to meet specifications, providing constructive team feedback, and calling out work issues and changes in equipment performance to supervisor for assessment and correction., • Performs detailed review of paperwork (ex: Device History Record)., • High School Diploma or equivalent, • The ability to fluently read, write, understand, and communicate in English., • Work hours: 2nd Shift; 9/80 work schedule; Monday – Thursday 3:00 PM – 12:30 PM and every other Friday 2:00 PM – 10:30 PM, • Travel Requirements: None, • Relocation Assistance: No, • Photonics experience, • Laser alignment skills, • Join Alcon’s mission to provide outstanding, innovative products and solutions to improve sight, improve lives, and grow your career!, • Collaborate with teammates to share standard processes and findings as work evolves!, • See your career like never before with focused growth and development opportunities!, • Data Analysis and Manipulation, • High School / GED, • Experience in a Manufacturing Environment, • Basic Computer Skills, • Calipers and Micrometers

Job DescriptionSenior Estimator We are a dynamic and growing General Contractor with a dedicated Specialty Projects Division focused on commercial tenant improvements and ground-up builds. Our work spans office, retail, healthcare, and mixed-use environments, delivering high-quality spaces with precision and speed. We're seeking a detail-oriented and strategic Senior Estimator to lead preconstruction efforts and help shape the future of our most agile and fast-paced projects. Role Overview As a Senior Estimator, you'll be responsible for preparing accurate and competitive estimates for a wide range of commercial projects, from high-end tenant improvements to ground-up builds. You'll collaborate with project managers, clients, architects, and subcontractors to develop budgets, analyze costs, and support winning proposals. Your expertise will be critical in driving profitability and ensuring project success from the very start. Key Responsibilities • Lead the estimating process for commercial TI and ground-up projects from concept through bid submission, • Analyze drawings, specifications, and project requirements to develop detailed cost estimates, • Solicit and evaluate subcontractor and vendor pricing; build strong relationships with trade partners, • Prepare quantity takeoffs, scope sheets, and bid packages, • Develop and maintain historical cost data and unit pricing databases, • Collaborate with project teams to align estimates with construction schedules and logistics, • Participate in preconstruction meetings and value engineering exercises, • Assist in proposal development, presentations, and client negotiations, • Monitor market trends, labor rates, and material costs to ensure competitive pricing, • Mentor junior estimators and contribute to continuous improvement of estimating processesQualifications, • 7+ years of experience in commercial construction estimating, with a focus on tenant improvements and ground-up projects, • Strong understanding of construction methods, materials, and building systems, • Proficiency in estimating software (e.g., Bluebeam, On-Screen Takeoff, Sage Estimating, Procore), • Ability to read and interpret architectural and engineering drawings, • Excellent analytical, organizational, and communication skills, • Proven ability to manage multiple estimates and deadlines simultaneously, • Bachelor's degree in Construction Management, Engineering, or related field preferredWhat We Offer, • Competitive salary and performance-based bonuses, • Comprehensive benefits package (medical, dental, vision, 401k), • Opportunities for career advancement and leadership development, • Collaborative team culture with a focus on innovation and excellence Vacation/PTO Medical Dental Vision 401k Bonus Relocation Telecommute • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 08/12/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Company Overview: At VFS, A Fortis Fire & Safety Brand, we provide industry-leading fire protection services across the United States. Our ever-growing footprint can be seen in California, Florida, North Carolina, and Chicago and we are acquiring new brands all the time. Our team provides a full spectrum of specialized and certified service professionals to support your company and protect your building with the peace of mind of properly installed and maintained fire and life safety systems. Here at Fortis and throughout our family of brands, we value our employees and offer competitive benefits which include: • 2 weeks of PTO, • 1 week of sick time, • Competitive pay, • 401k with Match, • Medical, Dental, and Vision, • Company Provided Life Insurance policy, • Company Provided Short Term Disability, • Disability and Life Insurance Packages, • 10 Company Paid Holidays, • Pet Insurance We are seeking a skilled Fire Alarm & Sprinkler Inspector – Level II to perform inspections, basic service, and routine troubleshooting of fire alarm and sprinkler systems. This role supports compliance with NFPA codes, state and local regulations, and internal standards. The Level II Inspector works under the guidance of senior inspectors and supervisors and may assist in training junior team members. Key Responsibilities: • Conduct inspections and testing of fire alarm and sprinkler systems in compliance with NFPA 72, NFPA 25, and other applicable codes., • Perform basic troubleshooting and minor repairs on fire alarm and sprinkler systems., • Assist with programming and commissioning under supervision., • Accurately document inspections, deficiencies, and repairs., • Communicate system conditions and deficiencies to customers in a professional manner., • Support senior inspectors on complex projects and installations., • Maintain tools, equipment, and inventory in company vehicle., • High School Diploma or GED., • 2–4 years of experience with fire alarm and/or sprinkler systems., • Familiarity with inspection procedures and basic troubleshooting., • Ability to read and interpret technical diagrams., • Proficient with mobile devices and basic computer applications., • NICET I OR II Certification in Fire Alarm Systems or Fire Sprinkler Systems, • Experience with low-voltage systems or fire alarm panels. Physical Requirements: • Must occasionally lift/move up to 75 lbs., • Frequent climbing, kneeling, standing, and dexterous work. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Fortis Fire & Safety Inc. is an EEO Employer. We select people on the basis of skill, training, ability, attitude, and character without discrimination with regard to age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or a disability that does not prohibit performance of essential job functions.