Trabajos construction safety en Los Angeles, California - Page 18Crear alertas

Job Description Essential Job Duties * Inspects the construction of a wide variety of airport improvements and utilities projects to ensure conformance to plans, specifications, contracts, permits, environmental documents, agreements for work, and may provide construction inspection support. * Conduct comprehensive daily inspections of mechanical and plumbing systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders. * Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner. * Verify contractor compliance with local and national mechanical and plumbing codes, and LAWA-specific standards. * Track and document time-and-material work, field changes, and job quantities * Assist in validating contractor progress payment requests based on an approved schedule of values. * Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed. Perform inspections of Mechanical and Plumbing installations including, but not limited to: * Domestic Water and Sewage Systems * Venting, fire sprinklers, and gas piping * HVAC systems (air handlers, chillers, boilers, ductwork) * Smoke Control Systems * Mechanical ventilation and exhaust * Fire and life safety integration (e.g. smoke dampers) * Mechanical and plumbing shutdowns, lockout / tagout procedures * Commissioning and balancing reports * Underground utilities * Fire life safety systems including smoke/heat detectors and FM-200 suppression systems Hardware/Software Knowledge * Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Xcel, Word, PM Web, Adobe Pro, Bluebeam, etc.). * Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision. Minimum Years & Experience • 3 years or more of experience performing mechanical inspections on large scale Public Works type projects Professional Licenses & Certifications • Current ICC Certification as a Commercial Mechanical Inspector, 30- hour Cal-OSHA training prior to assignment. The 30-Hour training has to have been received within the last 4 years. Education/Training * High school diploma (or equivalent)

Job Description Start your construction career with Essel today! We are looking to add hard-working and reliable future builders to our team. You will participate in a variety of construction projects throughout the Hollywood CA Some of our best performers earn opportunities to work on bigger projects with more pay! Responsibilities • Preparing construction sites, loading and unloading of materials, tools, and equipment., • Ensuring job site cleanliness and safety., • Assembling and breaking down barricades, temporary structures, and scaffolding., • Traffic management and flagging, • Experience is preferred., • Willingness to undertake training if necessary., • Reliability and dependability is a must., • Must be responsive to communication since project opportunities can come and go quickly, • Must be able to work a W2 role Full Time, Monday to Friday with potential overtime and weekend availability

Job Description Job Summary: This position is responsible for overall management direction for multi-family podium-style construction projects. Responsible for all phases of the construction project including but not limited to managing employees, subcontractors, owner relations, quality control, safety, schedule and executing to the project budget. Essential Duties/Responsibilities: • Plan, direct, and coordinate all activities for the projects assigned to ensure objectives are accomplished safely within prescribed funding and scheduling parameters., • Monitor and control project(s) budget and schedule., • Prepare and report project(s) costs, progress, and forecasts., • Establish and execute project work plans., • Maintain open communication channels with client, regulator, or other stakeholders., • Prepare and submit pay applications, Requests for Information, Purchase Orders, Submittals, Change Orders, Claims, Request for Proposals, Request for Qualifications, and any other required project-related communication., • Coordinate with Project Engineers and Superintendents in the allocation of shared resources such as personnel and equipment., • Serve as company representative at required project meetings or hearings and prepare documentation, as necessary., • Perform in depth review of all essential elements of projects assigned to identify challenges to mitigate or opportunities to realize., • Supervise work performed to ensure it meets company standards and quality plan., • Review drawings and specifications for constructability, completeness, and accuracy., • Supervision of Project Engineers, Superintendents and Foremen, as assigned. Requirements Required Skills/Abilities: • 5 years of project management in multifamily sector; ideally between 50 - 200 units, • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Excellent understanding of industry practices, processes, and standards., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Ability to function well in a high-paced and at times stressful environment., • Proficient with software/internet-based programs:, • ProCore, • Primavera P6, • BlueBeam, • Microsoft Offce (MS Project, Excel)Education and Experience:, • Bachelor’s degree in Civil Engineering, Construction Management, or equivalent combination of technical training and/or extensive experience in construction, design, finance, and management required., • Minimum 5 years of multifamily construction project management is required, • Demonstrated ability to thoroughly understand drawings and specification, general contractor & subcontractor documents, materials, means and methods., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. Utilize a variety of techniques and equipment to create custom fabricated steel parts and assemblies. Responsibilities include cutting materials, fitting up parts, welding parts together, and checking for quality per standards. Must follow all established safety and quality procedures. Work to be performed in the shop or on a construction site as needed and assigned. Pipe welding experience is a plus. Duties Include: • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications and drawings., • Operate tools and equipment to prepare the parts that must be welded together., • Align components using jigs, clamps, calipers, rulers, and other devices., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Assist with repairing machinery or equipment as needed by welding pieces and filling gaps., • Test and inspect welded surfaces and structure to discover flaws., • Erect and dismantle temporary scaffolding on job sites if needed., • Perform basic safety checks and preventative maintenance functions on tools and equipment., • Be able to lift 50 lbs., • Clean work area, machines, tools, and equipment., • Process paperwork associated with the above-listed tasks. Employee Must: • Be at least 18-years old., • Have high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background check., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have valid driver’s license and reliable, insured transportation., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Have good communication skills., • Have good attendance and show up to work on time every day., • Have strong basic math and measuring skills., • Be able to pass welding tests for stick and flux core. Benefits: • Competitive Pay with annual reviews., • Health, Dental and Vision insurance., • Paid Time Off (Begins accruing immediately), • 401k with company contribution, • Ability to work overtime. YXO2hzGBiD

Job Description CLMI Group client, ADU Express Construction LLC, is hiring: Senior Project Manager About ADU Express ADU Express is a fast-growing design-build firm specializing in multifamily ADU development across Southern California. Our focus is on unlocking value in multifamily properties by designing and building high-quality Accessory Dwelling Units (ADUs) efficiently and at scale. Our construction model is built around speed, precision, and repeatable systems. We operate in a high-paced, production-driven environment similar to a factory model, where standardized processes and disciplined execution allow us to deliver projects faster and more efficiently than traditional builders. Position Overview The Senior Project Manager will oversee multiple ADU construction projects from preconstruction through completion. This role is responsible for managing project managers, superintendents, subcontractors, and vendors while ensuring projects are delivered on schedule, within budget, and at the highest quality standards. Key Responsibilities • Oversee multiple ADU construction projects from preconstruction through completion, • Manage project schedules, budgets, and overall project performance, • Lead and supervise project managers, site superintendents, and construction teams, • Coordinate closely with the design, permitting, and preconstruction teams, • Monitor construction progress and resolve project challenges efficiently, • Review subcontractor bids and assist in procurement decisions, • Control project costs and approve change orders when necessary, • Maintain strong relationships with subcontractors and vendors, • Implement construction processes and systems to improve efficiency, • Ensure compliance with building codes, safety regulations, and quality standardsExecutive Reporting & Strategic Oversight, • Prepare and present weekly and monthly executive reports to company leadership summarizing construction progress across all projects, • Provide reporting on project schedules, construction milestones, budget performance, and overall portfolio status, • Track and report key performance indicators (KPIs) including project duration, cost per project, schedule adherence, and subcontractor performance, • Identify risks, delays, cost overruns, and operational bottlenecks and propose solutions to mitigate them, • Maintain portfolio-level visibility across all active projects to support executive decision-making, • Develop dashboards and reporting systems that support data-driven decision-making for company leadership Requirements Qualifications • 10+ years of experience in construction project management, • Experience managing multiple residential or multifamily construction projects simultaneously, • Strong knowledge of California residential building codes and construction practices, • Proven leadership experience managing construction teams and subcontractors, • Strong communication, organizational, and problem-solving skills, • Ability to manage project budgets, schedules, and deliver projects on timePreferred Qualifications, • Experience with ADU construction or multifamily developments, • Experience in design-build construction environments, • Paid Time Off, • Competitive Salary: Based on experience., • Performance Bonuses: We reward speed and efficiency., • Growth: Clear career path in a rapidly expanding design-build firm., • Potential leadership opportunities as the company expands

Job Description A Day in the Life of a Skilled Tradesman As a Skilled Tradesman, you provide a variety of restoration and disaster recovery services when sub-contractors aren't an option, ensuring quality workmanship on projects for First Onsite clients. You assist with administrative tasks such as daily field reports, crew sheets, and tracking expenses for projects, but you also provide the physical labor to get things done - from painting to installing, taping, and texturing drywall to installing both interior and exterior finishes. You are the muscle for building, construction, and demolition sites and may even participate in mitigation activities, such as water extraction, mold remediation, emergency board-ups, or tarping roofs. Whether loading/unloading materials, machinery, and tools or cleaning and preparing, you maintain safety at all times and adhere to Environmental, Health, and Safety protocols. You don't hesitate to help the team wherever and whenever you're needed, as you are willing to travel and are available for emergency/after-hours/weekend calls. You are providing a positive experience to clients during their time of need, and your hard work provides reassurance that First Onsite is the only restoration partner they'll ever need. You take pride in what you do every day and are thrilled to be part of a team that supports and encourages your professional growth and development. Responsibilities: • Assist with mitigation activities, including water extraction, fire and mold remediation, light demolition, emergency board-ups, and equipment setup, • Maintain vehicles, tools, and job sites cleaned, stocked, and ready for rapid response, • Support daily project operations by completing documentation, tracking expenses, and communicating updates to leadership, • Perform physical labor on restoration, construction, and demolition sites, including loading materials and preparing safe work areas, • Utilize basic construction skills such as painting, drywall installation/patching, texturing, and interior finish work, • Follow all Environmental, Health, and Safety protocols while working in potentially hazardous environments or disaster sites, • Possess or willingness to obtain a Water Mitigation Certificate within 1 year, • Restoration experience, preferred (will train), • Construction experience, preferred, • High school diploma or equivalent First Onsite provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. First Onsite (and its Companies) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer's Form I-9 to confirm work authorization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Third party resume submissions are not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee. Job Posted by ApplicantPro

Job DescriptionAbout Zephyr Rail Zephyr Rail is an engineering design and construction management firm based in Orange, CA. We specialize in providing comprehensive solutions in railroad design, construction management, and UAV solutions. We are proud to have earned Zweig Group’s recognition as a "Best Firms to Work For" for three consecutive years, demonstrating our commitment to our team and our industry. Job Summary As a Civil Inspector - Rail, you will be Zephyr Rail's eyes and ears on-site, ensuring the highest standards of quality and compliance on our heavy construction projects with a focus on rail and track. Reporting to the Resident Engineer, you will conduct daily inspections of all civil construction activities, materials, and components. Your keen eye for detail and expertise in industry certifications will be vital as you document non-conforming conditions and verify corrective actions, ensuring all work meets rigorous contract specifications for successful project delivery. Responsibilities • Perform daily quality control inspections and documentation in accordance with approved procedures., • Monitor and document materials, testing, and workmanship in accordance with contract requirements., • Verify that contract work is in conformance with the contract documents, QA/QC standards, and approved inspection/ test plans., • Document non-conforming conditions and verify the contractor's corrective actions., • Observe and inspect field sampling and testing of materials., • Support the Resident Engineer and CM team in maintaining accurate daily inspection records and reports., • Participate in coordination meetings and safety briefings as required., • High School Diploma or equivalent (associate or bachelor’s degree in civil engineering preferred)., • 10+ years of experience in heavy construction with a focus on rail/track., • It is mandatory to hold both ICC and ACI certifications., • Demonstrated knowledge of track construction, concrete, earthwork, and drainage systems., • Strong understanding of QA/QC procedures and material testing standards., • Ability to read and interpret drawings, specifications, and submittals., • Excellent written and verbal communication skills for daily reporting., • Ability to work effectively in a fast-paced, deadline-driven environment with multiple contractors and stakeholders. Benefits Paid Medical, Dental, and Vision, 401(k) Plan (with company match), Paid Time Off (PTO), Paid Holidays, Disability Insurance, Educational Assistance and Licensure Support, Performance-based Bonuses, Service Awards, Flexible/Hybrid Work Arrangements (role-dependent). How to Apply We're excited to hear from you! Feel free to apply directly on our careers page or learn more about the opportunities at . If you don't find exactly what you're looking for, don't hesitate to send your resume to . We would be pleased to consider you as a potential new member of our passionate team! At Zephyr Rail, we're an equal opportunity employer dedicated to fostering diversity and inclusion. Note to Recruiters and Job Placement Agencies We do not accept unsolicited resumes or candidate profiles from recruiters or agencies. We will consider any unsolicited resumes we receive as our property and will process them accordingly. We will only consider direct applicants. #LI-SB1 Powered by JazzHR wbV0McpKAq

Job Description We are seeking an experienced General Laborer for ongoing construction work in the Pacific Palisades area. This role is hands-on and requires prior experience with foundation-related tasks, demolition, and site prep. Ideal candidates are reliable, physically capable, and comfortable working in an active construction environment. Responsibilities: • Assist with foundation work and site preparation, • Perform dig-out work for plumbing and underground utilities, • Remove and reset pavers as needed, • Conduct demolition work, including concrete and structural removal, • Remove and re-post fence lines, ensuring proper alignment and stability, • Maintain a clean and safe job site, • Prior experience in general labor / construction, specifically foundation and demo work, • Ability to lift heavy materials and perform physical labor for extended periods, • Experience with hand tools and basic power tools, • Dependable transportation to job site in Pacific Palisades, • Experience working around plumbing trenches, • Familiarity with concrete, rebar, or grading work Compensation & Benefits: • $25–$30 per hour, based on experience

Job DescriptionBenefits: • Company parties, • Paid time off Job Summary: K Star Vinyl Fencing and Patio Covers seeks a skilled and reliable Vinyl Fence Installer / Foreman with a minimum of 3 years of experience to lead and oversee fence installation projects from start to finish. This position requires hands-on experience in vinyl fence construction, strong leadership abilities, and a commitment to delivering high-quality workmanship. The ideal candidate will be capable of supervising crews, managing job sites, and ensuring projects are completed on time and to company standards. Key Responsibilities: • Lead a team of installers on residential and commercial vinyl fence installation projects, • Read and interpret blueprints, layout plans, and measurements, • Oversee digging post holes, setting posts, and assembling vinyl fencing components, • Ensure all work meets safety, quality, and customer satisfaction standards, • Communicate project status and any issues with the office and clients, • Train new crew members and ensure team productivity and professionalism, • Maintain and manage tools, equipment, and job materials, • Enforce safety regulations and ensure a clean job site Qualifications: • 3+ years of experience in fence installation (vinyl fencing preferred), • Prior experience as a team leader, crew lead, or foreman, • Ability to read and understand construction plans and take accurate measurements, • Strong work ethic, attention to detail, and problem-solving skills, • Valid drivers license and reliable transportation, • Ability to lift 50+ lbs and work outdoors in various weather conditions Preferred Skills: • Bilingual (English/Spanish) a plus, • Familiarity with power tools and construction equipment, • Customer service experience on job sites Benefits: • Competitive pay (based on experience), • Opportunities for overtime, • Performance bonuses, • Career growth opportunities, • Supportive team environment To apply: Submit your resume or contact us at 844-600-6050 ext. 701.Join a team that takes pride in high-quality craftsmanship and customer satisfaction.

Job Description Job Title: Field Service Technician Location: Santa Fe Springs, CA Job Type: Full-Time Salary Range: $30 to $50 hourly depending on exp About Sonsray: Sonsray moves mountains for the construction, transportation, and agriculture industries. We are the West Coast's largest Thermo King & CASE dealership, offering sales, parts, service, rental, and leasing. We are committed to fostering a supportive and dynamic work environment. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development Responsibilities: • Diagnose, troubleshoot, and repair engines, transmissions, hydraulic systems, and electrical components., • Perform structural repairs, including welding., • Follow established Original Equipment Manufacturer (OEM) procedures and guidelines., • Demonstrate safe and proper application of hand, pneumatic, and electric tools., • Document repairs and maintenance using basic computer skills for accurate job records., • Travel regularly to customer and prospective client locations to perform on-site repairs and maintenance., • Comply with all road signs and operate vehicles safely within legal limits and weather conditions., • Follow all Auto and Equipment Safety rules and regulations while performing work assignments., • 2+ years of experience diagnosing and troubleshooting equipment (construction or heavy machinery preferred)., • Ability to work independently without supervision., • Proficient in using hand, pneumatic, and electric tools safely., • Basic computer literacy for documentation and reporting., • Must be over 21 years of age.

Job Description About Us: VOALA Helping Our Most Vulnerable Change Their Life Stories Volunteers of America is a non-profit human services organization committed to serving people in need, strengthening families, and building communities. VOALA provides a variety of social services to Los Angeles area communities such as Head Start programs, Upward Bound college prep programs, veterans’ services, homeless shelters, low-income housing program as well as drug and alcohol rehabilitation. Learn more at . PAY RATE: $19.00 - $20.00 Per Hour BENEFITS: VOALA offers competitive medical, dental, vision and retirement benefits JOB SUMMARY AND PURPOSE The Custodian performs daily janitorial duties, and immediate minor repairs to the facility, reporting any maintenance or safety deficiency to management for correction. Performs all tasks needed to maintain cleanliness, sanitation and safety of the facility, adhering to janitorial schedules provided DUTIES AND RESPONSIBILITIES • Maintains the interior and exterior of the facility, including building, parking lot and grounds, in good condition, • Daily cleaning of assigned areas using various cleaning products., • Restock bathrooms, • Responsible for dusting, window cleaning, waste cans, and vacuuming lobby area and hallways., • Performs or assists in minor repairs that might include the following: Carpentry, Plumbing, Interior painting, Refurbishing and cleaning, Landscape and irrigation systems., • Follows daily checklist provided by supervisor; Assures tools and supplies are stocked and appropriately secured in store rooms; maintains cleanliness and order of store rooms, • Checks facility daily for any safety concerns; understands local and building safety codes and requirements as well as OSHA, health department and EPA requirements; reports all deficiencies to management, • Prepares and sets-up rooms for meetings, classes and events, • Services for this position must be provided on-site. As a result, the position requires incumbents to report to work on-site each day of active employment., • Perform daily janitorial work, checking facility for maintenance or safety issues., • Performs minor repairs, reports deficiencies to management, • Assists maintenance teams when required, • Event set-up, • Keeps inventory of tools and supplies current As service providers to the underprivileged and vulnerable in our community, all employees are considered Mandated Reporters, and must report any instance of physical or sexual abuse to proper authorities. Qualifications REQUIREMENTS: • High school diploma (or GED/High School Equivalence Certificate), • Custodial or building maintenance experience in a shelter or a school setting preferred, • Ability to read and write instructions in English preferred, • Background in construction trades a plus This employer participates in E-Verify as required by the federal government and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.

Job Description • Are you a hardworking, service-minded leader with a real passion for the hospitality industry?, • Are you looking to take a step towards building your restaurant manager career, instead of just working a job?, • We need extraordinary leaders like you to apply for this fast-casual restaurant facilities management position in Los Angeles, CA As a Restaurant Facilities Manager, your experience and leadership skills will head up a unique brand of hospitality and an expanded fast-casual concept with equal emphasis on dine-in, takeout, and catering revenue centers. We prepare simple, from-scratch family recipes, just as you would at home, and we do so with an exceptional standard of service. The result? A warm, friendly, inviting, and delicious experience for our guests at prices that bring a whole new meaning to ‘value.’ • You will own the responsibilities for the restaurant staff in daily tasks, training, and developing them into assets of your team., • The Facilities Manager oversees the maintenance of the buildings and grounds of multiple restaurant locations throughout Southern California., • Assist the restaurant management teams in the oversight, purchasing, and upkeep of equipment and supplies, working with the local management teams to ensure the building and grounds are maintained, including determining and scheduling regular maintenance, repairs, and renovation projects., • This role oversees the scheduled work and negotiates with outside vendors., • Use creativity and communication to build a loyal customer base, and increase sales. Outstanding Benefits • Health Benefits, • Attainable Bonus Program, • $65K - $85K Salary, • Equal Opportunity Employer, • Company Car Key Responsibilities: • Practice safety as priority #1 for your restaurant team and customers, • Oversees building projects, maintenance, and repair of all restaurant assets, including parking areas, HVAC, mechanical, electrical, plumbing, utilities, and infrastructure systems., • Implements and monitors proactive preventative maintenance programs for each facility. Monitors improvements to energy efficiency, HVAC, equipment, grease traps, landscaping, etc., • Prepares any necessary requests for proposals (RFPs) and manages prospective vendors through the process, including contract negotiations in partnership with stakeholders., • Schedules vendors to perform work in designated restaurants and provide onsite oversight as needed., • Manages project documents, contracts, billing schedules, and invoices; works with vendors and suppliers to assign tasks and communicate expected deliverables., • Continually sources and requalifies suppliers. Performs routine assessments of vendor performance, pricing, on-time delivery, specifications, quality of product, workmanship, responsiveness, and issue resolution for the restaurants and other company assets. You will: • Have a minimum of 5 years of experience as a Facilities Manager, with 3 years of experience in the food service industry. Multi-unit restaurant experience preferred. Construction experience is a plus!, • Be experienced managing budgets, reviewing P&Ls and managing vendors., • Have experience with ResQ or similar facilities management software., • Travel throughout Southern California and beyond as the brand grows. A company vehicle will be provided., • Have a stable work history, • Be open to coaching and development, values that are critical to the Company and its success., • Have strong contract negotiating, critical thinking, conflict resolution, and problem-solving skills., • Bilingual English-Spanish preferred. Does this sound like you? We'd love to hear from you! Apply today!

Job DescriptionBenefits: • 401(k), • Dental insurance, • Free food & snacks, • Free uniforms, • Health insurance, • Paid time off Position Summary The Warehouse Clerk is responsible for maintaining an organized, clean, and efficient warehouse that supports daily plumbing operations. This role oversees inventory accuracy, parts tracking, barcoding systems, ordering support, and controlled access to tools and materials. The Warehouse Clerk plays a key role in ensuring technicians have the right equipment and materials available to deliver excellent service to customers. Key Responsibilities Warehouse Organization & Maintenance • Maintain a clean, safe, and well-organized warehouse environment., • Ensure shelves, bins, and storage areas are properly labeled and structured for efficiency., • Conduct routine warehouse inspections and report safety or maintenance issues., • Coordinate disposal, recycling, and storage of obsolete or damaged materials. Inventory Management • Receive, inspect, and properly store incoming parts, tools, and equipment., • Track and maintain accurate inventory levels of plumbing materials and supplies., • Perform regular cycle counts and assist with full inventory audits., • Monitor stock usage trends and identify shortages or overstock situations. Barcoding & Tracking Systems • Assign, label, and maintain barcodes for parts, tools, and equipment., • Manage inventory data within company software (e.g., Service Titan or other systems)., • Track tool and equipment check-in/check-out processes., • Ensure accurate logging of materials issued to technicians and job locations. Ordering & Vendor Coordination • Assist with ordering inventory based on usage and minimum stock levels., • Communicate with vendors regarding order status, returns, and discrepancies., • Verify packing slips and invoices against received goods., • Support cost control through proper inventory practices. Access Control & Accountability • Monitor and track access to inventory, tools, and restricted storage areas., • Maintain accountability systems to reduce loss, misuse, or theft., • Issue and collect tools and materials as needed., • Work closely with dispatch and technicians to ensure timely material availability. Operational Support • Prepare job materials and kits for technicians when needed., • Assist with loading and unloading company vehicles., • Support warehouse-related projects and process improvements., • Collaborate with the operations team to improve workflow efficiency. Qualifications • High school diploma or equivalent preferred., • 13 years of warehouse, inventory, or supply chain experience (plumbing or construction industry preferred)., • Basic computer skills; experience with inventory software or barcode systems is a plus., • Ability to lift and move materials (up to 50 lbs)., • Strong organizational skills and attention to detail., • Reliable, punctual, and able to work independently., • Valid drivers license preferred. Skills & Competencies • Strong organizational and time management skills., • Accountability and integrity in handling company assets., • Clear communication and teamwork abilities., • Problem-solving mindset and proactive approach., • Ability to multitask in a fast-paced environment. Work Environment • Warehouse setting with regular lifting, moving, and standing., • Exposure to plumbing equipment and materials., • May require occasional outdoor work or loading activities. Performance Expectations • Maintain accurate inventory records., • Ensure warehouse cleanliness and safety standards are consistently met., • Support efficient technician workflow through timely parts availability., • Reduce inventory loss and improve tracking accuracy.

Job DescriptionKDG Construction Consulting is seeking a Mechanical Inspector to support our construction inspection team in a high-priority, large-scale infrastructure environment. The Mechanical Inspector acts as a critical member of the team, ensuring that all work meets required standards and contractor schedules are met safely and efficiently. This position requires a dedicated professional capable of working within an active, operating environment to ensure the successful delivery of complex construction projects. Position Summary: The Mechanical Inspector is responsible for conducting comprehensive inspections of mechanical and plumbing systems to ensure compliance with applicable codes and project specifications. This role requires a professional with a thorough knowledge of the materials and methods used in the installation of plumbing, heating, air conditioning, and refrigeration systems. The successful candidate must be open to learning prescriptive items required by the agency and demonstrate excellence in documenting field activities. Key Responsibilities Technical Inspection & Quality Assurance: • Conduct comprehensive daily inspections of mechanical and plumbing systems across building and terminal construction projects., • Inspect domestic water and sewage systems, venting, fire sprinklers, gas piping, and HVAC systems (air handlers, chillers, boilers, ductwork)., • Oversee mechanical ventilation, exhaust, and fire/life safety integration, including smoke dampers and FM-200 suppression systems., • Verify contractor compliance with local and national mechanical and plumbing codes., • Review and interpret construction documents including blueprints, shop drawings, submittals, RFIs, and change orders., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies., • Perform inspections of underground utilities and fire life safety systems including smoke/heat detectors., • Monitor commissioning and balancing reports and oversee mechanical/plumbing shutdowns and lockout/tagout procedures. Documentation & Project Controls: • Prepare comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities., • Ensure accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Track and document time-and-material work, field changes, and job quantities., • Assist in validating contractor progress payment requests based on an approved schedule of values. Collaboration & Leadership: • Identify and address deficiencies, ensuring all aspects of construction meet the required standards., • Maintain excellent working relationships geared toward open communication and mutual problem-solving., • Work with contractors and engineers to ensure compliance with building codes and regulations on significant construction projects. Qualifications Required: • Experience: 3+ years or more experience performing mechanical inspections for Building Construction., • Certification: Current ICC certification as a Commercial Mechanical Inspector (Required to apply)., • Safety Training: Proof of Cal-OSHA 30 hr. training within the last 4 years., • Specialized Training: Fall protection and harness training., • Technical Skills: Knowledge of Project Management Information Software (PM Web, Bluebeam, Adobe Pro, Microsoft Office, Outlook, Excel, Word)., • Education: High school diploma (or equivalent)., • Shift Flexibility: Must be able to work any assigned shift—day, swing, or night—and modified schedules, including nights and weekends, as dictated by project schedules. Preferred: • Additional current ICC certification as a Commercial Plumbing Inspector., • NFPA 70E standards training within the last 3 years., • Plumbing experience (journeyman/master level) with progression into inspection., • Experience inspecting mechanical systems of large-scale commercial, industrial, or public buildings., • Confined Space Entry Training., • Experience overseeing compliance on significant construction projects and involvement in complex projects requiring coordination with multiple stakeholders (contractors, engineers, city officials). Core Competencies: • Thorough knowledge of materials and methods used in mechanical and refrigeration installations., • A strong understanding of diverse code requirements (CBC & CMC)., • Excellent communication and time management skills., • Expertise in identifying and addressing deficiencies to ensure compliance., • Computer proficiency to review and utilize electronic equipment for contract documents with minimal supervision. Anticipated Salary Range: $124,000.00 – $135,000.00 per year About KDG: KDG Construction Consulting is a leading provider of program, project, and construction management services. The firm serves clients in a broad range of markets throughout Southern California, including aviation, transportation, and infrastructure. KDG provides a full spectrum of management and technical services spanning the entire life cycle of a construction project. Employment with KDG: KDG is an Equal Opportunity Employer, and qualified applicants will receive consideration for employment without regard to race, ethnicity, sexual orientation, gender identity, national origin, veteran status, or disability status. Powered by JazzHR ZO4mjdyjsU

Job Description About Us: VOALA Helping Our Most Vulnerable Change Their Life Stories Volunteers of America is a non-profit human services organization committed to serving people in need, strengthening families, and building communities. VOALA provides a variety of social services to Los Angeles area communities such as Head Start programs, Upward Bound college prep programs, veterans’ services, homeless shelters, low-income housing program as well as drug and alcohol rehabilitation. Learn more at . PAY RATE: $19.00 - $20.00 Per Hour BENEFITS: VOALA offers competitive medical, dental, vision and retirement benefits JOB SUMMARY AND PURPOSE The Custodian performs daily janitorial duties, and immediate minor repairs to the facility, reporting any maintenance or safety deficiency to management for correction. Performs all tasks needed to maintain cleanliness, sanitation and safety of the facility, adhering to janitorial schedules provided DUTIES AND RESPONSIBILITIES • Maintains the interior and exterior of the facility, including building, parking lot and grounds, in good condition, • Daily cleaning of assigned areas using various cleaning products., • Restock bathrooms, • Responsible for dusting, window cleaning, waste cans, and vacuuming lobby area and hallways., • Performs or assists in minor repairs that might include the following: Carpentry, Plumbing, Interior painting, Refurbishing and cleaning, Landscape and irrigation systems., • Follows daily checklist provided by supervisor; Assures tools and supplies are stocked and appropriately secured in store rooms; maintains cleanliness and order of store rooms, • Checks facility daily for any safety concerns; understands local and building safety codes and requirements as well as OSHA, health department and EPA requirements; reports all deficiencies to management, • Prepares and sets-up rooms for meetings, classes and events, • Services for this position must be provided on-site. As a result, the position requires incumbents to report to work on-site each day of active employment., • Perform daily janitorial work, checking facility for maintenance or safety issues., • Performs minor repairs, reports deficiencies to management, • Assists maintenance teams when required, • Event set-up, • Keeps inventory of tools and supplies current As service providers to the underprivileged and vulnerable in our community, all employees are considered Mandated Reporters, and must report any instance of physical or sexual abuse to proper authorities. Qualifications REQUIREMENTS: • High school diploma (or GED/High School Equivalence Certificate), • Custodial or building maintenance experience in a shelter or a school setting preferred, • Ability to read and write instructions in English preferred, • Background in construction trades a plus This employer participates in E-Verify as required by the federal government and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.

Job DescriptionSalary: Starting $19/hr DOE Industrial Threaded Products (ITP) is seeking a dependable and hardworkingWarehouse Associateto join our established warehouse team. If you havestand up forklift experienceand a willingness to learn, this is an excellent opportunity to grow with a stable and expanding company. We are currently filling a position that will dedicate most of their shift to order pulling; a sku-heavy inventory, attention to detail is key. Full-time | Monday to Friday | 7:00 AM 3:30 PM | Please do not apply if you cannot meet start and end times The Brea Warehouse environment offers varied duties, not limited to, but including: • picking (order pulling), • packing, • physical counting, • scale counting, • use of RF scanner, • will-call and customer interaction, • loading/unloading containers, • shipping, • freight and logistics, • use of reach forklift, • use of sit down forklift Must be able to carry out regular and repetitive heavy lifting (up to 50lbs) as well as the ability to carry out for most of the day twisting, pushing, pulling and bending. Must have forklift experience (sit-down and reach/stand-up (cherry picker)) Use of Pallet trucks, RF scanners, label machines, and a PC will be required for which training can be offered to the right candidate. This is not an exhaustive list and other duties related to warehouse processes may be required. ITP is ADA compliant and welcomes requests for accommodations to the listed essential duties from employees with ADA recognized conditions. Benefits: • Medical Insurance (Kaiser or HealthNet), • Dental Insurance, • Vision insurance, • HRA (Health Reimbursement Account) Option, • HSA (Health Savings Account) Option, • Disability insurance, • 401(k), • Profit Sharing (after 1 calendar year of service), • Employee Discount Program, • Holiday Pay (7 days), • Life insurance (company-paid and Additional Voluntary Plans), • Paid time off (1st year is 40 hours), • Referral program, • Safety Boot program (yearly voucher) Location: 515 N Puente St, Brea, CA 92821 Industrial Threaded Products, Inc. (ITP) is a leading distributor and manufacturer of commercial threaded products and fasteners. The company has grown from a small industrial distributor in 1979 to a global supply chain service provider today, serving organizations nationwide. The companys growth has in part been attributable to its ongoing focus on better serving its customers through expanded and improved capabilities and product offerings, most recently by adding an automatic packaging line and custom threading operation. ITP serves several different industries and market segments, with a core focus on Construction, Waterworks, OEM, Pipe Supports, and Structural Steel. The company is family owned but is managed by a senior executive team focused on strategy and ongoing planning. Management places high value on training and empowering its team members and rewarding performance. The companys headquarters are located in Brea, CA which hosts centralized accounting, sales and purchasing functions as well as warehouse, packaging, and kitting operations. Fabrication, manufacturing, and warehousing operations are located within the Rancho Cucamonga, CA facility. The Fresno, CA warehouse services Northern California and a number of national accounts. The acquisitions of Construction Tool & Threading Co., Ababa Bolt, and Bristol Machine Co. have been pivotal in expanding our capabilities, broadening our product and service offerings, and reinforcing our commitment to meeting the diverse needs of our customers nationwide. ITPs Core Values Our core values are intrinsic in all we do, and all employees must learn and work to them in all they do: Serving(we thoroughly enjoy providing a level of quality & service that goes far beyond what is expected) Hardworking(we are passionate and will outwork any competitor with efficiency and relentless focus) Innovative(we choose to be a solutions-driven company committed to strategic innovation) Relational(people matter deeply to us and we treat them with the highest level of respect and loyalty) Trusted(we are honored by the level of trust given to us by our customers and we embrace our reputation) Candor(approaching all dealings and communications in a respectful, open, and honest way)

Job Description Position Description Summary The Mechanical Inspector will support construction inspection and work as a member of Quality Assurance & Construction Inspection Division across multiple projects. *Candidates must possess a current ICC certification as a Commercial Mechanical Inspector to apply. *Proof of Cal-OSHA 30 hr. training within the last 4 years, prior to assignment *Must be able to work any assigned shift - day, swing, or night - as required to meet the contractor's construction schedule. Professional Experience Level/Minimum Qualifications • Current ICC Certification as a Commercial Mechanical Inspector, • Proof of Cal-OSHA 30 hr. training within the last 4 years, • Fall protection and harness training. Preferred Qualifications and Experience: • Additional Current ICC certification as a Commercial Plumbing Inspector, • NFPA 70E standards training within the last 3 years., • Plumbing experience (journeyman/master level) with progression into inspection., • Confined Space Entry Training Must be open to learning the prescriptive items required by the agency. • A strong understanding of diverse code requirements (CBC & CMC)., • Excellent communication and time management skills. Essential Job Duties • Verify contractor compliance with local and national mechanical and plumbing codes., • Track and document time-and-material work, field changes, and job quantities, • Domestic Water and Sewage Systems, • Venting, fire sprinklers, and gas piping, • HVAC systems (air handlers, chillers, boilers, ductwork), • Smoke Control Systems, • Mechanical ventilation and exhaust, • Fire and life safety integration (e.g. smoke dampers), • Mechanical and plumbing shutdowns, lockout / tagout procedures, • Commissioning and balancing reports, • Underground utilities Education/Training • High school diploma (or equivalent) NOTE: • May assume other duties as required/needed., • May be required to work various shifts, including day, swing, and night. Job Posted by ApplicantPro

Job DescriptionSalary: $28.00- $32.00/hour JOB TITLE: Field Technician REPORTS TO: Regional Field Services Manager STATUS: Temporary (6 months duration), Full time, non-exempt LOCATION: Rodeo, CA SALARY RANGE: $28,00-$32,00/ hour based on interview outcome and qualifications BENEFITS: Medical, dental, and vision insurance, optional FSA/HSA, 401k with 6% employer match, life and AD&D insurance, Employee Assistance Program, short & long term disability, tuition reimbursement, 21.67 days of paid time off + 10 holidays About Tidal Vision and Clear Water Services: Water is the most precious resource and is needed by every industry. AtTidal Vision, we create solutions that are proven to reduce non-biodegradable metal-based polymers and enhance the performance of treatment systems. We remove pollutants for stormwater, industrial wastewater, drinking water, and more in a greener way. Clear Water Serviceswas acquired by Tidal Vision in 2023 and leads the industry as water treatment application experts. Specializing in compliance management and solutions that are designed to capture our customers needs, challenges, and mission, Tidal Vision and Clear Water Services offer a suite of solutions for all customer needs.Together, we are on a mission to solve the water treatment industry's greatest challenges. Job Summary: The Field Technician is a key member of the Field Operations team responsible for supporting water treatment and environmental remediation projects across diverse geographic regions. This role primarily involves operating, maintaining, and supporting the installation of water treatment systems related to stormwater, groundwater, construction runoff, and other environmental services. The Field Technician works independently in the field while also collaborating with Lead and Senior Lead Technicians to ensure safe, efficient, and high-quality project execution. Success in this role requires strong mechanical aptitude, adaptability, and a positive attitude to support evolving project and client needs. Frequent travel throughout California is required. Essential Job Functions: • Operate and maintain water treatment systems in the field., • Support system installations, mobilizations, and demobilizations., • Prepare and ensure equipment readiness for installation., • Maintain accurate field logs and required project documentation., • Provide shop and yard support, including cleaning, organizing, QA/QC checks, equipment preparation, and material handling., • Perform other duties as assigned to support operational needs. Basic Qualifications: • Ability to work independently in a fast-paced, dynamic environment, • Mechanical aptitude and familiarity with basic hand and power tools, • Strong time management and organizational skills, • Ability to communicate effectively with supervisors, team members, and contractors, • Prior experience in water treatment, construction, landscaping, or related field, • Ability to tow a trailer or willingness to obtain proficiency within three (3) months, • Ability to lift and carry up to 50 pounds Preferred Qualifications: • Foundational knowledge of water treatment systems, • Experience operating construction equipment or machinery, • Experience supporting environmental remediation or field-based service operations, • Experience with QA/QC processes and basic fabrication tasks Licensing & Special Requirements: • Valid drivers license required, • Ability to tow a trailer or obtain competency within three (3) months, • Incumbent is subject to a criminal background check. Working Conditions and Physical Requirements: Work is performed primarily on construction sites located in the northern California region and at times you will be needed to support our efforts in the southern California market as well. This position will be expected and required to follow safety standards and wear all personal protective equipment in designated areas and while on site. Must be able to work in all adverse weather conditions, including long days, weekends, holidays and night shift if needed. Physical ability to lift and carry up to 50 pounds is required. This position will be expected to travel, mostly within the immediate region, up to 30% Tidal Vision provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. The statements contained herein reflect general details as necessary to describe the principal functions of this job, the level of knowledge and skill typically required, and the scope of responsibility, but should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other functional areas to cover absences or relief, to equalize peak work periods, or otherwise to balance the workload. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Job DescriptionFull Time Walker Brothers Anaheim, California Benefits: Medical, Dental, Vision, 401k, Paid Time Off , Paid Holidays. ESSENTIAL DUTIES AND RESPONSIBILITIES • Operates tractor trailers and other necessary equipment including loading and unloading., • Supports operations by moving objects of size and weight, and installing and dismantling equipment., • Reads and follows plans, material lists and guidelines and applies necessary timelines., • Place equipment on trailers for loading and off-loading., • Signal or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety., • Select gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules., • Dismantle and store rigging equipment after use, • Report to customers or managers on the progress of the job, the estimated time left to complete the work and evaluations of employees., • Fulfills all regular and advanced installations/construction duties, including project layout, and completes paperwork in a timely manner., • Organizes, supervises, leads, and trains employees to complete projects within established guidelines and timeframe., • Control movement of heavy equipment through narrow openings or confined spaces, using chain-falls, gin poles, gallows frames, and other equipment., • Inspect rigging to ensure safety and reliability., • Ensures that proper safety and incident reporting procedures are followed, brings problems to the attention of the Operations Manager, Superintendent, Safety Director, or HR Representative., • Follows daily Driver 1/2 procedures and protocols as set forth in job orientations and trainings., • Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with coworkers and including the ability to communicate effectively and remain calm and courteous under pressure., • Check with Dispatch at end of job for further duties or end of day, • Regularly communicates with maintenance staff about repairs and maintenance needs on major pieces of equipment on assigned job., • Other Duties as Assigned JOB REQUIREMENTS • Must have CDL, • Must have experience in a related field., • Basic mechanical skills, • Works collaboratively in a team environment with a spirit of cooperation., • Maintains punctual, regular, and predictable attendance., • Good perception of math applications; weights, balances, and measurements, • Flexible schedule, able to travel, work out of town, weekends and work overtime, • Respectfully takes direction from supervisor, • Uses job appropriate PPE, • Enforces and complies with all company and client required safety policies and procedures., • Basic and advanced rigging techniques., • Ability to read and create drawings and lifting plans., • Understand tools required for the job and the purpose of the tools, • Work onsite at customer locations, as needed.

Job DescriptionCennox is looking for a Carpenter to work in the Los Angeles, CA area. Primary business is commercial construction and renovation services for financial institutions.Position Summary:Carpenter responsibilities include onsite management of commercial renovation projects. Project work takes place after hours and on weekends. The ideal candidate should have construction experience, ability to work without direct supervision, excellent oral and written communication skills, and be able to organize their work using MS office tools. Ultimately, a successful Carpenter should ensure the efficient and smooth day-to-day communication with Clients, Sub-Contractors, and internal staff. Duties and Responsibilities: • Conduct site surveys to determine initial project plan with Project Manager., • Ensure all required materials orders, equipment delivery, and inspections occur to support the project schedule., • Responsible for site safety. Ensure the overall jobsite is safe for workers and visitors as well as manage compliance with established company safety policies., • Understand, review, and manage project plans, specifications, and manufacturer's data and execute project based upon said documentation., • Review construction documents for completeness and constructability., • Manage the overall project and 3-week look ahead schedules, including working in master schedules and updating it on a weekly basis., • Generate RFI's (Requests for Information) as required to ensure completeness of the project documents and identifying and clarifying any discrepancies., • Work with the project team to follow the company’s quality control program for the project., • Conduct preconstruction planning meetings., • Conduct on-site project meetings with subcontractors and construction trades lead personnel to clearly identify scope of work and quality expectations., • Manage subcontractors for all work performed on-site., • Set an example in keeping the job site organized and clean, including meeting standards for waste disposal and environmental protection., • Track site progress, capture progress photos and report subcontractor onsite manhours utilizing an app on your phone.Job Requirements:, • Construction Management / Carpentry experience (2 years minimum)., • 2+ years of proven leadership or supervisory role., • Clean DMV/Drug Test/Background Check back to 18 years old., • Comfortable reading and understanding blueprints and drawings., • Reliable transportation and flexible work hours., • All work is completed after hours at night and on weekends., • High school diploma or equivalent., • Organizational and multi-tasking skills., • High level of attention to detail., • Ability to lift and move 50 or more pounds, • Ability to work indoors and outside (including during inclement weather), • Ability to stand for long periods of time, • Ability to sit and drive vehicle with extensive travel, • Ability to climb, bend, stoop, and reach freely Powered by JazzHR bfWcOyknlL

Job Description Polaris Freight Group (DC TRAFFIC) is seeking a skilled and dedicated Class A Driver to join our dynamic team in the Construction Materials Transportation industry. This position is ideal for individuals who posses a strong work ethic and a commitment to safety, as all drivers will be responsible for transporting goods across various routes in Southern California while ensuring compliance with all regulations. In this role, the driver will be tasked with securing loads using rigging equipment, conducting vehicle inspections, and maintaining communication with dispatch to provide updates on their progress. The driver will enjoy the benefit of competitive compensation, flexible scheduling, and opportunities for career advancement within our organization. Responsibilities: • Transporting freight safely and efficiently using a Class A Tractor/Step Deck trailer combination, • Securing loads to prevent damage during transport using rigging equipment and chains, • Performing pre-trip and post-trip vehicle inspections and reporting any maintenance issues, • Maintaining accurate logs of driving hours, stops, and delivery information, • Communicating effectively with dispatch, customers, work site personnel, and other team members, • Adhering to all federal, state, and local driving laws and regulations, • Ensuring compliance with safety protocols and company policies, • Loading and unloading cargo as required, using appropriate equipment and techniques Requirements: • Valid Class A Commercial Driver's License (CDL), • Minimum of 5 years of tractor/step deck driving experience preferred, • Clean driving record with no major violations, • Ability to operate manual and automatic transmissions, • Strong knowledge of DOT regulations and safety standards, • Excellent communication and interpersonal skills, • Strong physical stamina, • Ability to work independently and make decisions on the road

Job DescriptionDescription: Job Summary The Service Technician is responsible providing exceptional service to our customers while performing on-site diagnostic, troubleshooting, preventive and corrective maintenance on a variety of gate and door systems. Essential Duties and Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Provides a positive, collaborative, and informative customer service experience to both residential and commercial customers. Diagnoses the nature of the issue triggering the service call. Confirms authorization to perform the repair, scope, and warranty-related issues are resolved before beginning work., • Performs all necessary preventative and corrective maintenance. Welds, wires, and programs customer equipment as required by the nature of the service call. Ensures all workplace health and safety requirements are met. Maintains housekeeping and security of customer locations and job sites., • Ensures device operates as intended and as desired by the customer. Closes out the call in Service Titan. Documents the scope of work completed and identifies any other malfunctioning customer equipment or opportunities for additional work., • Manages truck inventory and partners with support team to order or purchase specialized equipment, missing parts, and other components and tools. Please note this job description is not designed to over or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time without notice. Requirements: Qualifications Required Education and Experience • Education and/or experience equivalent a High School diploma and 3 or more years working with gate operators, electronic controls, or other low-voltage electrical systems, or similar trade-related experience. Associates degree or vocational program with a focus on electro-mechanical systems preferred., • Familiarity with basic welding principles preferred., • At least 2 years of field service-related experience working on-site at customer locations and interacting with customers., • Communications: Able to communicate effectively in written and oral format with diverse individuals. Able to present information and respond to questions with peers, managers, clients, customers, and the general public on technical subjects. Able to read and comprehend written work instructions, technical documents, blueprints, manufacturer instruction manuals and other materials in English., • Math: Able to perform simple addition, subtraction, multiplication and division using standard units of measure and weight., • Reasoning: Able to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to develop logical troubleshooting techniques based on an understanding of the product performance and test requirements., • Time Management: Able to track and prioritize tasks in a fast-paced environment with several simultaneous projects/work orders. Able to work with minimal supervision., • Technology: Knowledge of email, texting, and work order systems sufficient for basic communication, reporting, and notes., • Physical Requirements: Able to push/pull/lift up to 50 lbs. frequently throughout the day. Able to stand, climb, walk, kneel, and crouch frequently, as required at a variety of customer locations/work sites. The physical environment for this position includes construction sites, warehouses, and outdoor customer locations. Frequently required to use and promote use of personal protective equipment to prevent injury. Travel Required Frequent day travel to and from job sites, vendor locations, and offices.

Job Description Entry-level technician position(s) available for recent college grads. In this position, the successful candidate will conduct building related environmental assessments, assist with project design and monitor contractors during remediation activities. The position will focus on asbestos, lead, water intrusion and indoor air quality projects; thus strong understanding of building systemsis desirable. Additional activities will include working on subsurface (soil and groundwater) investigations, Phase I Environmental Assessments (ESAs), hazardous materials management audits, LEED air sampling and waste diversion management, etc. depending on qualifications. Regulatory required training and State of California certifications will be provided as skills and interests are developed. Candidates should be energetic, interested in building systems, health & safety concerns. Familiarity with computer operations(Windows & Mac), Microsoft Office and basic drafting programs is mandatory. Positions available in both the greater Los Angeles Area and the Bay Area. Technicians will also prepare reports and other project documents related to field operations; assist with equipment maintenance & calibration and general office support. Minimum Requirements: • Recent Graduate with BA/BS in environmental sciences, health & safety, industrial hygiene or building related fields., • Competent written and verbal communication skills, • Strong organizational abilities and strict attention to detail, • Computer literate, • Willing to travel, work evenings and weekends as projects require, • Be in good physical health and able to wear respiratory and other personal protective equipment, • Ability to climb ladders, navigate crawl spaces, lift/carry equipment (generally up to 50 lbs), stand for long periods oftime., • Basic drafting skills, • Knowledge of building systems & construction techniques, • Ability to read & understand construction drawings (architectural & MEP) ACC provides a comprehensive benefits package to regular full-time and qualifying part-time employees that includes: • Eligibility to participate in the company Employee Stock Ownership Program for qualifying individuals., • Group Medical Insurance, • HSA Contributions to qualifying plans, • 401(k) Retirement Savings Program, • Paid Time Off, • Nine Paid Holidays Per Year, • Bonus Program, • Employee Assistance Program, • Long-term disability insurance, • Life insurance, • Professional development funds for professional license fees, memberships, training and seminars

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements with no automatic restrictions., • Starting pay is $32.40 per hour after paid training. BENEFITS:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusEssential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. This is a full-time position. Hours of work may vary at plant or other location. Not eligible for remote work. Must be available 6 days a week and to work overtime as job duties demand. Travel Required: Yes Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify A&A Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. A&A Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job DescriptionSalary: 24 - 37 hourly Position Summary As a Service and Repair Technician in the fire protection industry, you will be responsible for troubleshooting, servicing, maintaining, testing, and repairing fire alarm systems to ensure reliable operation and code compliance. This role is critical to supporting customers in the field by diagnosing issues, completing repairs efficiently, documenting work accurately, and helping ensure fire alarm systems are restored to proper working order. About the Company Intelligent Fire Systems & Solutions (IFSS) is a fire-life safety construction and service company founded in 2014 with a clear and unwavering purpose: to protect lives, property, and peace of mind. Built on decades of industry expertise, IFSS delivers fire alarm, very early warning, and life-safety solutions with precision, care, and an uncompromising commitment to doing the work the right way every time. At IFSS, life safety is more than a trade; it is a responsibility we take personally. That responsibility shapes how we design, install, inspect, maintain, and service critical systems, and it defines how we show up for our clients and for one another. Our work is grounded in quality craftsmanship, integrity in action, accountability, reliability, and a relentless pursuit of excellence, with safety and trust at the center of every decision. From initial design through long-term service and code compliance support, we take a thoughtful, personalized approach because protecting people and assets requires more than technical skill; it requires care, follow-through, and pride in the outcome. Our mission is simple and non-negotiable: to passionately protect lives and assets by delivering exceptional experiences every time. When you join IFSS, you become part of a team that values collaboration, professionalism, and purpose and that takes pride in protecting what matters most. Fire, Life, & Your Safety. Always. Key Responsibilities and Objectives System Installation and Programming • Install, configure, and program advanced fire alarm systems, including control panels, detectors, alarms, and notification devices., • Perform regular maintenance and testing to ensure optimal performance and reliability., • Ensure systems comply with federal, state, and local fire safety codes and regulations., • Maintain accurate records of inspections, tests, repairs, and service activities., • Collaborate with technicians and service personnel to complete projects and support emergency response situations., • Communicate with clients to understand needs and provide technical support and recommendations., • Travel to project sites as needed., • Perform other duties as assigned. Technical Skills * Fire alarm system installation, configuration, and programming (panels, detectors, alarms, notification devices). * Programming customization to meet project requirements and integrate with building systems. * Preventative maintenance, testing, troubleshooting, repairs, and component replacement. * Code compliance awareness (federal/state/local) and thorough service documentation. * Ability to read and interpret technical manuals, blueprints, and schematics. • Proficiency with Microsoft Office (Word, Excel, Outlook) and engineering/software applications. Soft Skills & Competencies • Strong verbal and written communication skills; ability to explain technical information clearly to clients. Customer-focused approach to understanding needs and providing recommendations and training. * Problem-solving and analytical mindset for diagnosing issues and identifying solutions. • Reliable, adaptable, and able to work independently and as part of a team. Qualifications Education & Experience * High school diploma or equivalent; additional education or relevant certifications are a plus. * F-Card, NICET, and OSHA 10 required; Siemens experience preferred. * 3+ years of experience installing or servicing electronic control systems; fire alarm experience preferred. • Must be able to demonstrate knowledge of fire alarm systems. Work Environment & Physical Requirements • Standing and walking for extended periods, and frequent bending, kneeling, crouching, reaching, and climbing., • Working at heights (using ladders, scaffolds, and/or lifts) and in confined or limited-access spaces such as ceiling plenums, risers, mechanical/electrical rooms, and crawl spaces., • Lifting and carrying tools, test equipment, and materials (typically up to 50 lbs., with or without reasonable accommodation)., • Using hand tools and diagnostic equipment (meters, testers, programming tools) requiring fine motor skills and manual dexterity., • Ability to safely operate a company vehicle (if assigned) and travel between job sites as needed., • Ability to clearly communicate and document service findings, repairs completed, and recommendations, including using mobile devices or tablets for service documentation. This job description outlines the core responsibilities and qualifications for a Service and Repair technician in the Fire Protection industry. The role requires a strong knowledge of the fire protection industry and systems, multitasking abilities, and interpersonal skills to effectively manage the workforce and contribute to the company's success. COMMITMENT TO DIVERSITY As an equal opportunity employer committed to meeting the needs of a multigenerational and multicultural workforce, Intelligent Fire Systems & Solutions, Inc. recognizes that a diverse staff, reflective of our community, is an integral and welcome part of a successful and ethical business. We hire local talent at all levels regardless of race, color, religion, age, national origin, gender, gender identity, sexual orientation or disability, and actively foster inclusion in all forms both within our company and across interactions with clients, candidates and partners. If this position caught your eye, send us your resume! For best consideration, include the job title and source where you found this position in the subject line of your email to . Already a candidate? Please connect directly with your recruiter to discuss this opportunity.

Job Description Join Our Star-Studded Team at Power Trip Rentals! At Power Trip Rentals, we’re not just any heavy equipment rental company—we're the heartbeat of the entertainment industry, providing the gear that powers everything from the glitz and glamour of the Oscars and Grammys to the behind-the-scenes magic of blockbuster films. We specialize in heavy-duty equipment that fuels the production of world-class events and movie sets, delivering with precision, reliability, and flair. We’re seeking a seasoned and safety-conscious CDL Flatbed Class A Driver to roll with our dynamic crew. As a key player on our team, you’ll be entrusted with the safe transport and delivery of high-end equipment to set locations, keeping productions running smoothly. Whether you're hauling gear for a red carpet event or on set for a major film shoot, your role is crucial in making sure everything arrives on time, in perfect condition, and ready to shine. What You’ll Do: • Safely operate a tractor-trailer or heavy-duty flatbed truck (26,000+ GVW) to transport rental equipment., • Load, secure, and unload heavy machinery and construction equipment, ensuring all safety protocols are followed., • Perform daily pre-trip and post-trip inspections to maintain vehicle and trailer integrity., • Ensure DOT and company compliance with all safety regulations and proper documentation., • Maintain accurate logs and records of deliveries, pickups, and service calls., • Provide exceptional customer service, ensuring clients receive their equipment safely and on time., • Suggest additional equipment or services that may help customers complete their projects., • Report mechanical issues, delays, or safety concerns to dispatch., • Work primarily night shifts, with flexibility for weekend work as needed.What You Bring to the Team:, • Valid Class A CDL license with a clean driving record., • Minimum of 2 years of commercial driving experience (DOT-regulated)., • Previous experience with heavy equipment hauling and flatbed operations is highly preferred., • Strong knowledge of load securement procedures, tie-downs, chains, and safety requirements., • Basic mechanical knowledge to perform minor equipment troubleshooting in the field., • Ability to lift 50 lbs and work in varying outdoor conditions., • Commitment to safety and a strong work ethic.Why Join Power Trip Rentals?, • Competitive hourly pay based on experience., • Comprehensive benefits package, including:, • Health, dental, and vision coverage., • 401(k) with company match., • Paid time off and holiday pay., • Annual boot and PPE allowance.

Job DescriptionSenior Field Service Engineer WET (Design) / WET Legacy Travel ~50% | Electrical + Controls Focus What We Do At WET (Design), we create projects that transform the way people experience nature’s elements. Our work is multi-sensory and large scale, redefining how people connect with water, light, sound, and each other. From The Fountains of Bellagio to The Dubai Fountain, our teams design, build, and support some of the world’s most iconic water features. WET Legacy is the technical service arm that keeps these features alive—commissioning, programming, maintaining, and upgrading complex systems around the world. How You Can Add WET is a great environment for people who are talented, inquisitive, passionate, driven, team oriented, and relentless problem solvers. If you take ownership, move with urgency, and don’t give up until the system is working the way it should, you’ll feel at home here. We’re now raising the bar on our field service team and looking for Senior Field Service Engineers with strong electrical and controls foundations who also enjoy getting hands on with mechanical and plumbing systems. The Core of the Position You’ll be the technical expert on site, responsible for keeping advanced, one of a kind water features safe, reliable, and performing as designed. This is a senior, electrical / controls heavy field role with significant autonomy, travel, and direct impact on systems the public experiences every day. Travel requirement: 50%+ (primarily US, with potential for international assignments) What You’ll Do • Perform site visits across the US (and occasionally abroad) to commission, troubleshoot, and maintain WET features, • Electrical power distribution and protection, • Programmable logic controllers (PLCs) and control panels, • Motor controls, VFDs, and rotating machinery, • Power supplies, transformers, contactors, relays, fuses, circuit protection, GFCI, and E-stop systems, • Animation / show control systems and related electronics, • Modify control system parameters, • Upload / modify HMI or touch screen pages, • Update schedules, sequences, and time clocks, • Calibrate and tune transmitters and field instrumentation, • Ensure features are tuned and operating to spec, and record all settings for future reference, • Provide client training on operation, safety, and basic maintenance, • Document work clearly and on time: service reports, findings, recommendations, and follow up actions, • Identify potential upgrade / retrofit opportunities while onsite and communicate them internally, • Coordinate and supervise removal, replacement, or retrofit of equipment at customer sites, • Switchboards and electrical power system control/protection, • Electrical power distribution and protection, • Motor controls and VFDs, • PLC based systems (commissioning, troubleshooting, or maintenance), • Ability to read and interpret construction drawings: architectural, electrical, and mechanical, • Fluent in English (written and verbal), • Valid driver’s license and ability to travel by air regularly (domestic and occasionally international), • Comfortable working independently on customer sites with minimal supervision, • Industrial electrical / electronic field service, • Mechanical systems, pumps, valves, and plumbing related to process or water systems, • IT / networking as it relates to controls and field devices, • Installation, commissioning, maintenance, and repair of high voltage induction and synchronous motors (rotating machinery), • Strong troubleshooting mindset and comfort with complex, non-standard systems, • Clear and confident communication with both technical and non technical stakeholders, • Strong customer service orientation and ability to maintain professionalism under pressure, • Good time management and ability to work to targets and deadlines If you’re a senior technician or engineer who wants serious field responsibility, cutting edge electrical and controls work, and the chance to see the world while working on unique, large scale kinetic water features, we’d love to talk. Powered by JazzHR MoSq87FZ1w

Job Description The Field Service Technician II plays a crucial role in troubleshooting, maintaining, and repairing low voltage systems, including network infrastructure, surveillance cameras, servers, NVRs, access control hardware and software, and audio-visual systems. Reporting directly to the Service Manager, this position requires a highly motivated self-starter with exceptional technical expertise in low voltage systems and a strong commitment to delivering outstanding customer service. The Field Service Technician II also acts as a mentor and leader for the Field Service Technician I, providing guidance and support to help them develop the skills necessary for advancement. Participation in Premise One's on-call service program is a key component of this role. Key Responsibilities • Safety & Site Preparation: Conduct pre-work site assessments and safety checks to ensure a safe working environment., • Customer Service Excellence: Provide exemplary customer service, consistently maintaining the highest service standards and client satisfaction., • Field Leadership: Lead by example, guiding Field Service Technician I employees to ensure efficient, first-time resolution of service issues., • Project Execution: Implement job plans with a focus on quality assurance and safety compliance, ensuring project completion meets company standards., • Autonomous Field Operations: Operate independently in the field, making informed decisions to resolve technical issues on-site., • Technical Troubleshooting: Diagnose, service, and repair low voltage systems in commercial and enterprise environments, ensuring all repairs adhere to company and industry standards., • Testing & Documentation: Test all repairs on-site in alignment with Service Operations and Engineering policies. Accurately document all work performed, including notes, photos, and communications, in online ticketing systems and timecards., • On-Call Rotation: Participate in the on-call rotation, providing emergency after-hours service as required., • Vehicle Maintenance: Maintain the company-issued vehicle in accordance with company standards, ensuring it is always in optimal condition., • Professional Conduct: Maintain a professional appearance and demeanor at all times, representing the company positively in all interactions., • Continuous Improvement: Provide feedback and suggestions to the Field Superintendent or Service Manager to enhance service delivery and field operations., • Communication: Proactively communicate scheduling issues and other concerns to the Field Superintendent, Service Manager, and dispatchers., • Experience: 5+ years of experience in Audio Visual, Security, Intercom/Paging, and Infrastructure Cabling., • Technical Knowledge: Strong understanding of programming, technical commissioning guidelines, and troubleshooting philosophies., • Industry Expertise: Familiarity with industry-standard tools, equipment, and test devices, such as Fluke testers, meters, and OTDR., • Security Background: Preferred candidates will have a robust background in physical security systems., • Genetec, • Software House, • Lenel, • Feenics, • Milestone, • Avigilon, • Flexibility: Willingness to work overtime as needed to meet construction and service schedules., • On-Call Capability: Ability to support 24/7 client SLAs and respond to emergencies when required., • Travel: Willingness to travel at least 60% of the time within the designated service market, with occasional out-of-town travel up to 20%., • Technical Proficiency: Competent in using computers and industry-specific software., • Physical Requirements: Ability to handle physical workloads, including lifting and carrying up to 50 lbs, and the ability to walk, sit, and stand for extended periods. Powered by JazzHR 8xZalTxmPh

Job Description We are seeking a proactive, detail-oriented, and tech-savvy Office Coordinator to support day-to-day operations in our Los Angeles office. This individual will be responsible for creating and maintaining a functional, efficient, and welcoming work environment. The ideal candidate thrives in a dynamic, fast-paced setting, has a collaborative spirit, and possesses strong administrative, IT troubleshooting, and organizational skills. The Office Coordinator at COPE Health Solutions will report to the Office Manager, and will also support our Information Technology and People Experience teams, with the management and maintenance of the corporate office spaces of COPE Health Solutions’ Los Angeles office. The ideal candidate will have a strong presence with the ability to communicate with employees at all levels, both internally and externally, and possess excellent organizational, interpersonal and communication skills. FLSA StatusNon-ExemptSalary Range$ 22-$27 Per hourReports ToOffice ManagerDirect ReportsNoneLocationOnsite (LA Office )TravelNoneWork TypeRegularScheduleFull Time Position Description: Office Operations & Facilities Support • Maintain a clean, safe, and professional office environment always., • Serve as the primary liaison with building management, vendors, and office services (cleaning, security, maintenance)., • Manage office space planning, furniture setup, and coordination of construction or expansion projects., • Oversee distribution, inventory, and reordering of office and kitchen supplies while managing budgets and avoiding waste., • Organize and support internal moves, workstation preparation, and office upgrades as needed. Administrative & Team Support, • Provide high-touch support to all staff and executives with scheduling, meeting coordination, guest services, and travel logistics., • Manage calendar bookings and conference room scheduling, including setting up for in-office and virtual meetings., • Greet and assist guests and vendors with professionalism and warmth., • Handle mail distribution, shipping, and courier needs., • Support coordination and logistics for office events, large meetings, and executive gatherings. Technology & IT Coordination, • Partner with the Director of IT to support local hardware setup, connectivity issues, printer maintenance, and AV/telecom systems., • Train staff in proper use of office equipment and ensure instructional materials are available., • Maintain an office IT checklist and support implementation of basic troubleshooting and ticket triage. Compliance & Documentation, • Maintain accurate documentation of vendor contacts, lease agreements, office layout, and key/fob access assignments., • Support onboarding and offboarding processes with proper allocation of badges, keys, workspace, and IT tools., • Track and maintain emergency procedures, safety protocols, and office access policies. Qualifications:, • Bachelor’s degree preferred, • 2+ years of experience in office coordination or business administrative support., • Proven ability to multitask and manage competing priorities with professionalism and grace., • Strong interpersonal, written, and verbal communication skills., • High level of discretion and confidentiality with sensitive information., • Comfortable supporting executives and interfacing with senior leadership. Technical Skills:, • Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint)., • Experience with Microsoft Teams, Zoom, or similar conferencing platforms., • Knowledge of project management or task tracking software (e.g., Trello, Asana) preferred., • Basic IT troubleshooting and comfort with setting up or relocating office technology. What You’ll Bring:, • A proactive, solutions-focused mindset, • Strong sense of ownership and accountability, • Commitment to creating a welcoming and well-functioning workplace, • Enthusiasm for teamwork and cross-functional collaboration Apply: To apply for this position or for more information about COPE Health Solutions, visit us at .

Job DescriptionSalary: 151,000 $161,000 Inspector, Mechanical Los Angeles, CA Full-Time | On-Site | Los Angeles, CA Why CMTS? Every day at CMTS, our team delivers infrastructure projects that positively impact lives and communities. With over 42 years of industry experience, CMTS has built a strong foundation for continued success, providing project and construction management services to public and private clients nationwide. We value our employees by fostering a culture of learning, professional development, and collaboration. CMTS is committed to maintaining a work environment that emphasizes safety, integrity, and accountability while supporting work-life balance and employee well-being. Our teams are empowered to grow, contribute, and make a meaningful impact through the projects we deliver. About Your Role The Mechanical Inspector is responsible for ensuring that all mechanical systems on public works construction projects meet applicable codes, standards, and project specifications. This role involves inspecting HVAC, plumbing, and fire protection systems throughout all phases of construction while coordinating with contractors, engineers, and project teams to ensure compliance and quality. Education Requirements • High School Diploma What Youll Need to Get the Job Done Qualifications • 3+ years of experience performing mechanical inspections on large-scale Public Works projects, • Experience inspecting HVAC systems (rough and finish), • Experience with plumbing systems including pumps, piping, ducts, equipment, controls, vaults, and underground systems, • Experience inspecting fire sprinkler systems, • Experience reviewing and approving monthly progress payments, • Experience reviewing as-built drawings, • Strong report writing and documentation skills, • Proficiency in Microsoft Office and inspection-related software What Will Make You Stand Out • Experience on large infrastructure or capital improvement projects, • Familiarity with Prolog and VEO systems, • Strong coordination and communication skills Certification / License • ICC Commercial Mechanical Inspector Certification, • Cal-OSHA 30 (within last 4 years) What Youll Do • Perform mechanical inspections on public works construction projects, • Inspect HVAC, plumbing, and fire sprinkler systems for code compliance, • Review contractor work for adherence to project specifications, • Evaluate and approve monthly progress payments, • Review and verify as-built drawings, • Prepare clear and detailed inspection reports, • Coordinate with project teams, contractors, and stakeholders, • Support project schedules, including overtime and weekend work if required What You Can Expect from CMTS • Opportunities to work on high-impact infrastructure projects across the United States and the U.S. Virgin Islands, • Collaborative and growth-focused team environment, • Competitive compensation, • 100% company-paid medical, dental, vision, 401k, life, and long-term disability insurance coverage, • Career advancement and professional development opportunities Salary Requirements • $151,000 $161,000 annually Apply Now ! Equal Employment Opportunity CMTS, LLC is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, pregnancy, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Job Description Are you looking for an opportunity to independently service a territory with the ability to spend most of that time outdoors? What if that opportunity included competitive pay and a generous benefits package, with the largest HVAC preventive maintenance company in the nation? The BFC Solutions team is excited to meet you to explore a Filter Technician role open near you! The Filter Tech in this region should be prepared to stay overnight one week (Monday night through Thursday night) at least once per month. As a Filter Tech you will enjoy the following benefits: Monday- Friday workday, plus overtime as needed Competitive pay rate Weekly paycheck Company take-home vehicle Company phone Overnight travel with expenses paid The BFC benefits package includes: • Health insurance, • Vision insurance, • Dental insurance, • 401(k) with employer matching, • 8 paid holidays, • Paid time off Job Requirements: • Must be at least 21 years of age to operate the company vehicle., • Must possess and maintain a valid driver's license and have a good driving record (no DUIs or multiple infractions, subject to monthly review)., • Must live within 40 miles of the designated region., • Must be comfortable and confident working at heights up to 40 feet above ground level and using extension ladders., • Must weigh less than 275 pounds to meet ladder safety and weight limit requirements., • Must be comfortable working outside in all weather conditions., • Proven success working independently with remote supervision., • Must be willing and able to work overtime as required., • Must be able to lift and carry up to 75 pounds, • Facility and/or grounds maintenance, • Construction, • HVAC, • Cable installation, • Route driving, • Roofing #ind123

Job Description Join our Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever and it’s not because of what we do, but how we do it. It’s simple, our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS: • Medical, Dental & Vision Coverage, • 401(k) Program, • $100K Life Insurance YOUR CAREER STARTS HERE! ABOUT US: Tomarco Contractor Specialties LLP, (dba ISAT Total Support) is a pioneer in MEP subcontractor services, blending engineering expertise, manufacturing experience, and wholesale distribution. Since 1977, our commitment to innovation has led to cost reduction, faster installation, and a safer working environment for projects of all sizes worldwide. Our dynamic team of over 700 professionals specializes in MEP support design, technical VDC (Virtual Design and Construction), project management, detailing, project support, and more. We offer holistic solutions for projects of any size, and believe in a collaborative approach that streamlines the design and construction process, reducing project completion times. This role, Warehouse Associate - supports day-to-day warehouse operations, including shipping, receiving, inventory handling, and general organization of materials. The ideal candidate is dependable, detail-oriented, and thrives in a fast-paced environment. ESSENTIAL DUTIES (Other duties may be assigned as needed) • Review assembly instructions, blueprints, and parts lists to prepare for work; gather required parts, subassemblies, tools, and materials., • Accurately pick, load, and unload materials and products from trucks and storage areas., • Assemble parts and components using templates, measurements, and specifications., • Verify proper fit and secure fastening of parts and subassemblies., • Inspect and measure completed components to confirm compliance with specifications., • Troubleshoot and resolve assembly issues or escalate to supervisors when needed., • Input data to track inventory, shipments, and orders using basic computer systems., • Operate a sit-down forklift safely and efficiently to move goods within the warehouse., • Perform basic maintenance and report any equipment malfunctions., • Maintain a clean, safe, and organized work area in accordance with company policies., • Monitor inventory levels and submit supply requests as needed., • Complete production and quality control documentation accurately., • Collaborate with team members to meet production goals and deadlines. RESPONSIBILITIES: • Responsible for the planning, installation, maintenance and servicing of the devices, machinery, and equipment in the department pursuant to the legal regulations in force,, • Responsible for developing, communicating, and training of operational and working instructions,, • Responsible for reporting any suspicious activity. QUALIFICATIONS: To perform this job successfully, an individual must be able to carry out each essential duty effectively. Key qualifications include: • Knowledge of controls and instrumentation, mechanical inspection tools, and safety practices, • Experience in equipment maintenance and manufacturing environments, • Proficiency with power tools and basic hand tools 2+ years’ experience in general assembly work or specialized training. Experience with power and hand tools is a plus. LANGUAGE SKILLS: Ability to effectively communicate (orally and in writing) within the organization. MATHEMATICAL SKILLS: Basic math and communication skills required. Further Qualifications—The successful candidate must pass a background check. *Equal Opportunity Employer

Job DescriptionSalary: $29-$32 Warehouse Manager Cerritos, CA | $29$32/hr | Full-Time About Better Earth Better Earth is a leading residential solar installation company committed to making clean energy accessible for homeowners. We're growing fast and looking for a hands-on Warehouse Manager to keep our Cerritos operations running smoothly. About the Role We're looking for an organized, safety-minded Warehouse Manager to oversee daily warehouse operations, manage inventory, and support our solar installation crews with the materials and equipment they need to succeed. You'll play a critical role in keeping projects on schedule and our team equipped. What You'll Do • Oversee all warehouse operations including receiving, storage, inventory control, and order fulfillment, • Manage and maintain accurate inventory of solar panels, inverters, racking, and installation materials, • Operate forklifts and warehouse equipment safely and efficiently, • Coordinate with field operations and project managers to ensure timely material delivery to job sites, • Supervise and train warehouse staff on safety protocols, best practices, and SOPs, • Maintain a clean, organized, and OSHA-compliant warehouse environment, • Track shipments, manage vendor relationships, and resolve supply chain issues, • Conduct regular inventory audits and cycle counts to minimize shrinkage, • Ensure proper handling and storage of equipment and hazardous materials, • 2+ years of warehouse management or supervisory experience, • Valid current driver's license (required), • Forklift certification (required), • Strong knowledge of inventory management systems and warehouse operations, • Experience with shipping/receiving, logistics, and supply chain coordination, • Ability to lift 50+ lbs and work in a physically demanding environment, • Excellent organizational and leadership skills, • Strong communication skills and ability to work cross-functionally, • Proficiency with inventory software/WMS and Google Workspace a plus, • Competitive pay: $29$32/hr based on experience, • Health insurance, • Vision insurance, • Dental insurance, • Life insurance, • 401(k) retirement plan, • Opportunity to grow with a mission-driven company in the booming solar industry

Job DescriptionAbout the Role We are seeking a skilled Roofing Supervisor to join our Facilities Services Division. In this role, you will oversee the assessment, inspection, and documentation of roofing systems across District sites. Your expertise will help determine the overall condition, service life, and repair/replacement needs of roofing systems, ensuring the safety and longevity of our facilities. Key Responsibilities • Identify, survey, and assess roofing systems and components across District sites., • Enter and manage building data using tablets, laptops, and other digital tools., • Apply construction knowledge to evaluate roof systems, even those hidden behind ceilings and walls., • Determine remaining service life (RSL) of roofing components with guidance from leadership., • Collaborate with survey teams to gather accurate measurements, specifications, and condition data., • Conduct ad hoc roofing surveys and provide recommendations on repairs or replacement., • Supervise staff or survey participants as needed, ensuring quality and compliance. Requirements Minimum Requirements • Bachelor’s degree in Engineering, Architecture, or Construction Management; OR, • At least 10 years of roofing/construction experience (4 years of which may substitute for degree)., • 6+ years of full-time experience with on-site construction management teams., • Strong knowledge of roofing systems, construction materials, and repair practices. We offer a competitive benefits package designed to support your well-being and growth, including: • 120 hours of PTO/Vacation annually, • 10 paid holidays per year, • 3% 401(k) employer match, • Profit sharing program, • Paid holiday during the last week of the year

Job Description CLMI Group client, ADU Express Construction LLC, is hiring: Project Managers to join a "Production Revolution Movement” in LA Housing! ADU Express Construction LLC is seeking a Project Manager who is as skilled at leading people as they are at managing budgets. We operate a high-pace, factory-style model that requires a leader who can command a room, inspire a field crew, and master digital workflows. Our Project Managers don’t just monitor progress; they drive results. We need a closer who can navigate ADU multifamily builds and ensure every project hits its completion target with precision and quality. The Mission: Deliver multifamily ADUs at scale through disciplined project execution . What You’ll Do: • Strategic Project Delivery: Lead multiple ADU builds from groundbreaking to final sign-off, ensuring every project hits key milestones on time., • Decisive Leadership: Serve as the primary point of command for field superintendents and subcontractors, maintaining a high-performance culture on every site., • Unified Project Oversight: Utilize computer skills and knowledge to maintain a centralized project hub for all real-time data and documentation., • Performance Accountability: Set clear expectations for trade partners, ensuring "factory-speed" standards are met without compromising safety or code compliance. What You Bring: • 5–8+ years of construction PM experience with a proven track record of hitting project deadlines., • Leadership Presence: Exceptional communication skills and the ability to mentor junior staff and manage vendor performance. The Payoff: • Paid Time Off, • Competitive Salary: Based on your experience and leadership track record., • Performance Bonuses: Rewarding project completion, budget health, and team efficiency., • Impact: Real growth opportunities in a firm that is disrupting the LA housing market., • Potential leadership opportunities as the company expands

Job Description Fabrication Manager Location: Los Angeles, CA Job Type: Full-Time Company Overview: Object Construction is a leading Scenic Fabrication Company, specializing in bringing creative visions to life through innovative fabrication techniques. We are seeking a dedicated and experienced Fabrication Manager to oversee our fabrication department and ensure the highest quality of our products. Position Overview: The Fabrication Manager is responsible for overseeing all aspects of the production process, ensuring projects are executed efficiently and on time. This role involves managing day-to-day operations, coordinating with department managers, and ensuring quality standards are met. A strong understanding of construction management principles, including project scheduling, resource allocation, and subcontractor coordination, is essential. Essential Job Functions: * Manage the entire production effort, including pre-production, fabrication, painting, wrapping, labeling, manifesting, shipping, and installation, using construction management techniques. * Work with the Project Manager to develop and maintain detailed production schedules, ensuring accurate timelines, task dependencies, and proper resource allocation. * Work closely with the Project Manager to ensure efficient use of resources and alignment with project schedules and requirements. * Implement quality control measures throughout the production process to ensure projects meet established standards and specifications. * Work with Project Management to coordinate subcontractors on assigned projects, ensuring their work aligns with project timelines, quality expectations, and safety regulations. * Conduct regular reviews of project drawings, construction plans, and material specifications to ensure feasibility and accuracy before distribution. * Facilitate coordination between departments, ensuring smooth communication and efficient workflow from design to fabrication and installation. * Work with Production Managers to source and purchase materials, ensuring orders are accurate, cost-effective, and delivered on schedule. * Inform and work with Project Management regarding project equipment rentals, transportation needs, and logistics to support timely delivery and setup at job sites. * Conduct regular site visits and inspections to monitor production progress, address any issues, and ensure compliance with safety regulations and quality standards. * Work with Project Management to maintain detailed project documentation, including daily logs, reports, and change orders, to track progress and ensure transparency. * Manage the project closeout process, ensuring all aspects are completed to specifications and conducting post-project evaluations to identify areas for improvement. Qualifications: * Bachelor’s degree in Construction Management, Project Management, or a related field * Minimum 3 years of experience in scenic fabrication or a related construction/production environment. (preferred) * Strong knowledge of construction management principles, including project scheduling, budgeting, and resource allocation. * Proficient in project management software and construction scheduling tools. * Demonstrated ability to manage subcontractors and coordinate complex, multi-phase projects. * Strong leadership qualities with experience leading cross-functional teams in a fast-paced environment. * Excellent written and verbal communication skills, with the ability to produce clear project reports and documentation. * Comprehensive understanding of construction materials, methods, and equipment. * Must be able to lift 50lbs, stand 4-8 hour a day, and be able to pass a medical evaluation for respirator use. * Must hold a valid Driver's licence and be able to travel to job sites throughout the country

Job DescriptionSalary: $28.50-$35.06 City Rise Traffic - Traffic Control Lead: North Hollywood Hourly / Non-Exempt / Full Time Salary Range: $28.50 - $35.06/ hour Salary depends on job classification and location We are a well-established and growing company offering a competitive salary and a great benefits package for the right candidate. We service all of California from multiple locations. At City Rise Traffic, we provide high-quality traffic control safety services to construction sites, such as flagging traffic through a work site, lane closures to divert traffic, or detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for construction crews, our employees, and the public. Our focus is safety, so our customers can focus on their jobs. Position Summary: The Traffic Control Lead possesses a general knowledge of principles and practices of supervision. He or she works under the direction of a contractor to identify the various needs and/or phases of a job and is involved in providing onsite leadership and supervision over the traffic control work crew to ensure successful execution. The Lead is expected to safely execute all scopes of traffic control work, including but not limited to flagging setups, single to multi-lane closures, road closures, detours, freeway closures, specialty projects, and field supervision. Outside of the standard Lead job site duties, the Lead will draw on their own knowledge and experience to assist in the onsite training and development of our traffic control employees. The Lead will collaborate with safety & training and field operations to maintain job-site compliance through employee evaluations, jobsite inspections, onsite training, and performance reviews. Essential Functions: Supervise job site Develop superior knowledge of work zone setup and professional traffic control responsibilities Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones Implement Traffic Plans & Permits Complete daily Job Hazard Analysis and conduct tailgate meetings Onsite client contact Maintain a consistent and unrelenting focus on safety throughout all job functions. Manage day-to-day work zone set up, maintenance and tear down. Meeting or exceeding customer, state, federal and company expectations Ability to recognize dangers using hearing and vision Ability to handle stressful situations and take safe action to avoid serious injuries to any pedestrians, vehicles, customers, and employees Ability to understand traffic signals/signs, traffic plans and customer requests Ability to communicate with customers, the public, and with other team members Follow company and MUTCD guidelines for effective, safe and well managed work zones Driving company trucks Tow and operate towable equipment Keep equipment in trucks well organized and in working order Evaluate employee performance Other duties as assigned Qualifications: Current LIUNA membership with journey person classification, applicable CBA required Proficient knowledge of the Caltrans MUTCD Can read and understand traffic control plans and permits Can establish and maintain effective working relationships with coworkers and others Can work independently with minimum supervision while prioritizing workloads to meet deadlines Strong interpersonal skills and professional demeanor Work in high-volume outdoor locations with multiple interruptions throughout the day Strong conflict resolution techniques Strong leadership skills Strong customer service skills Excellent multitasking, problem-solving, and organizational skills Basic computer skills required Valid CA drivers license with a clean driving record/insurable Experience driving medium duty vehicles and towing trailers Bilingual in English/Spanish a plus but not required Education: High school diploma preferred 3 years experience in a traffic control lead role or equivalent preferred Valid ATSSA flagging certification Valid ATSSA traffic control tech certification Valid ATSSA traffic control supervisor certification OSHA 10 certification OSHA 30 certification First aid/CPR certification TMA certification Has received all internal training required for lead advancement Physical Demands: Lift, carry and place traffic cones to ensure the safety of the work zone. Lifting may be up to 50 lbs Use hands to handle, feel or reach with arms to talk Sit, stoop or kneel Lift, carry, pull, or place and assemble traffic control signs in the proper order to manage work zone traffic Standing/walking for long periods while flagging, in various weather conditions and different times of day/night Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Language Skills: Ability to read and comprehend instructions, correspondence, and memos. Ability to write clear instructions, explanations, and correspondence. Ability to read, understand, and implement TCPs and follow industry guidelines. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Equal Employment Opportunity and Non-Discrimination: City Rise Traffic adheres to providing equal employment opportunity and affirmative action. City Rise Traffic does not discriminate on the basis of race, color, creed, religion, national or ethnic origin, sex, gender, age, sexual orientation, marital status, pregnancy, disability, medical condition, or veteran status. Employment is contingent upon new employees verifying legal permission to work in the United States, successfully passing criminal and drug test.

Job Description About Us: VOALA Helping Our Most Vulnerable Change Their Life Stories Volunteers of America is a non-profit human services organization committed to serving people in need, strengthening families, and building communities. VOALA provides a variety of social services to Los Angeles area communities such as Head Start programs, Upward Bound college prep programs, veterans’ services, homeless shelters, low-income housing program as well as drug and alcohol rehabilitation. Learn more at . PAY RATE: $19.00 - $20.00 Per Hour BENEFITS: VOALA offers competitive medical, dental, vision and retirement benefits JOB SUMMARY AND PURPOSE The Custodian performs daily janitorial duties, and immediate minor repairs to the facility, reporting any maintenance or safety deficiency to management for correction. Performs all tasks needed to maintain cleanliness, sanitation and safety of the facility, adhering to janitorial schedules provided DUTIES AND RESPONSIBILITIES • Maintains the interior and exterior of the facility, including building, parking lot and grounds, in good condition, • Daily cleaning of assigned areas using various cleaning products., • Restock bathrooms, • Responsible for dusting, window cleaning, waste cans, and vacuuming lobby area and hallways., • Performs or assists in minor repairs that might include the following: Carpentry, Plumbing, Interior painting, Refurbishing and cleaning, Landscape and irrigation systems., • Follows daily checklist provided by supervisor; Assures tools and supplies are stocked and appropriately secured in store rooms; maintains cleanliness and order of store rooms, • Checks facility daily for any safety concerns; understands local and building safety codes and requirements as well as OSHA, health department and EPA requirements; reports all deficiencies to management, • Prepares and sets-up rooms for meetings, classes and events, • Services for this position must be provided on-site. As a result, the position requires incumbents to report to work on-site each day of active employment., • Perform daily janitorial work, checking facility for maintenance or safety issues., • Performs minor repairs, reports deficiencies to management, • Assists maintenance teams when required, • Event set-up, • Keeps inventory of tools and supplies current As service providers to the underprivileged and vulnerable in our community, all employees are considered Mandated Reporters, and must report any instance of physical or sexual abuse to proper authorities. Qualifications REQUIREMENTS: • High school diploma (or GED/High School Equivalence Certificate), • Custodial or building maintenance experience in a shelter or a school setting preferred, • Ability to read and write instructions in English preferred, • Background in construction trades a plus This employer participates in E-Verify as required by the federal government and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.

Job DescriptionSalary: $49.63 City Rise Traffic - Traffic Control Lead: Long Beach Hourly / Non-Exempt / Full Time Salary Range: $49.63/hour We are a well-established and growing company offering a competitive salary and a great benefits package for the right candidate. We service all of California from multiple locations. At City Rise Traffic, we provide high-quality traffic control safety services to construction sites, such as flagging traffic through a work site, lane closures to divert traffic, or detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for construction crews, our employees, and the public. Our focus is safety, so our customers can focus on their jobs. Position Summary: The Traffic Control Lead possesses a general knowledge of principles and practices of supervision. He or she works under the direction of a contractor to identify the various needs and/or phases of a job and is involved in providing onsite leadership and supervision over the traffic control work crew to ensure successful execution. The Lead is expected to safely execute all scopes of traffic control work, including but not limited to flagging setups, single to multi-lane closures, road closures, detours, freeway closures, specialty projects, and field supervision. Outside of the standard Lead job site duties, the Lead will draw on their own knowledge and experience to assist in the onsite training and development of our traffic control employees. The Lead will collaborate with safety & training and field operations to maintain job-site compliance through employee evaluations, jobsite inspections, onsite training, and performance reviews. Essential Functions: Supervise job site Develop superior knowledge of work zone setup and professional traffic control responsibilities Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones Implement Traffic Plans & Permits Complete daily Job Hazard Analysis and conduct tailgate meetings Onsite client contact Maintain a consistent and unrelenting focus on safety throughout all job functions. Manage day-to-day work zone set up, maintenance and tear down. Meeting or exceeding customer, state, federal and company expectations Ability to recognize dangers using hearing and vision Ability to handle stressful situations and take safe action to avoid serious injuries to any pedestrians, vehicles, customers, and employees Ability to understand traffic signals/signs, traffic plans and customer requests Ability to communicate with customers, the public, and with other team members Follow company and MUTCD guidelines for effective, safe and well managed work zones Driving company trucks Tow and operate towable equipment Keep equipment in trucks well organized and in working order Evaluate employee performance Other duties as assigned Qualifications: Current LIUNA membership with journey person classification, applicable CBA required Proficient knowledge of the Caltrans MUTCD Can read and understand traffic control plans and permits Can establish and maintain effective working relationships with coworkers and others Can work independently with minimum supervision while prioritizing workloads to meet deadlines Strong interpersonal skills and professional demeanor Work in high-volume outdoor locations with multiple interruptions throughout the day Strong conflict resolution techniques Strong leadership skills Strong customer service skills Excellent multitasking, problem-solving, and organizational skills Basic computer skills required Valid CA drivers license with a clean driving record/insurable Experience driving medium duty vehicles and towing trailers Bilingual in English/Spanish a plus but not required Education: High school diploma preferred 3 years experience in a traffic control lead role or equivalent preferred Valid ATSSA flagging certification Valid ATSSA traffic control tech certification Valid ATSSA traffic control supervisor certification OSHA 10 certification OSHA 30 certification First aid/CPR certification TMA certification Has received all internal training required for lead advancement Physical Demands: Lift, carry and place traffic cones to ensure the safety of the work zone. Lifting may be up to 50 lbs Use hands to handle, feel or reach with arms to talk Sit, stoop or kneel Lift, carry, pull, or place and assemble traffic control signs in the proper order to manage work zone traffic Standing/walking for long periods while flagging, in various weather conditions and different times of day/night Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Language Skills: Ability to read and comprehend instructions, correspondence, and memos. Ability to write clear instructions, explanations, and correspondence. Ability to read, understand, and implement TCPs and follow industry guidelines. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Equal Employment Opportunity and Non-Discrimination: City Rise Traffic adheres to providing equal employment opportunity and affirmative action. City Rise Traffic does not discriminate on the basis of race, color, creed, religion, national or ethnic origin, sex, gender, age, sexual orientation, marital status, pregnancy, disability, medical condition, or veteran status. Employment is contingent upon new employees verifying legal permission to work in the United States, successfully passing criminal and drug test.

Job Description Project Manager – Telecommunications & Utility Construction Salary: $110,000– $125,000 per year + Benefits We are seeking an experienced Project Manager to lead pre-construction and construction activities for large-scale telecom and utility infrastructure projects. This role requires a strong background in safety, scheduling, subcontractor coordination, and quality control, with the ability to deliver projects on time and within budget. Responsibilities: * Plan, organize, and supervise all phases of assigned construction projects. * Schedule major construction tasks and manage subcontractor services, including payment approvals. * Coordinate activities of field superintendents, craft labor, and subcontractors to maintain project continuity. * Serve as the primary point of contact for clients, subcontractors, permitting authorities, and utility providers. * Ensure strict adherence to job safety, quality standards, schedules, and regulatory requirements. * Conduct site visits, attend pre-bid meetings, and review all construction documents and specifications. * Perform accurate material take-offs, obtain vendor/subcontractor quotes, and prepare labor/material estimates. * Develop budgets, track costs, and manage project schedules. * Oversee inventory, material management, and loss control. * Manage change orders, verify work completion percentages, and coordinate billing. Requirements: * Minimum 18 years of age and authorized to work in the U.S. * Demonstrated experience in telecom/data infrastructure development, permitting, and utility coordination. * Strong knowledge of civil construction practices, quality assurance, and OSHA safety compliance. * Valid driver’s license and willingness to travel to project sites as needed. * Proficient in Microsoft Office; knowledge of project management software is a plus. * Excellent communication and leadership skills; bilingual in Spanish is a plus. * Ability to read, analyze, and prepare business correspondence and proposals. * Strong organizational skills with the ability to manage multiple tasks simultaneously. Preferred Qualifications: * Experience in telecom/data infrastructure development domestically or abroad. * Extensive knowledge of approved practices, procedures, tools, and materials used in telecom line construction. Benefits Include: * Weekly paychecks * Paid time off, holidays, and parental leave * Comprehensive health, dental, vision, life, and disability insurance * 401(k) with company match * Stock purchase plan * Education reimbursement * Legal insurance If you are a safety-focused leader with a proven track record in telecom or utility construction project management, we’d love to hear from you.

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital Projects THE WORK: • You'll inspect the construction of a wide variety of airport improvements and utilities projects to ensure conformance to plans, specifications, contracts, permits, environmental documents, agreements for work, and may provide construction inspection support., • You'll conduct comprehensive daily inspections of mechanical and plumbing systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • You'll demonstrate strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • You'll verify contractor compliance with local and national mechanical and plumbing codes, and LAWA-specific standards., • You'll track and document time-and-material work, field changes, and job quantities, • You'll assist in validating contractor progress payment requests based on an approved schedule of values., • You'll support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships. You may be required to work various shifts, including day, swing, and night.HERE’S WHAT YOU’LL NEED:, • High School diploma (or equivalent), • 3 years or more of experience performing mechanical inspections on large scale Public Works type projects, • Current ICC Certification as a Commercial Mechanical Inspector, • 30-hour Cal-OSHA training received within the last 4 years prior to assignmentBONUS POINTS IF YOU HAVE:, • Additional Current ICC certifications as commercial Plumbing Inspector, • NFPA 70E standards training within the last 3 years is preferred, • Training & knowledge of NFPA -70, 70E, & 72 is preferred, • Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings, • Plumbing experience (journeyman/master level) with progression into inspection, • Experience inspecting mechanical systems of large-scale commercial, industrial or public buildings, • Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects, • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement Requirements: -Valid Los Angeles City Department of Building and Safety (LADBS) license for the scope of work being inspected; have a thorough knowledge of building construction practices, and be experienced in one or more of the expertise areas listed below: -Reinforced concrete -Reinforced masonry -Structural Steel and Welding -Prestressed Concrete Controlled Activities: -Sprayed Applied Fireproofing -Drilled-in-Anchors -Shotcrete Soils/Grading -Seismic Resistance 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years. Essential Job Duties • Create and maintain comprehensive daily inspection reports that capture the WHO, WHAT, WHEN, WHERE, and HOW of all construction work activities, while ensuring the reports are clear and concise to accurately reflect daily progress, • Assist in reviewing monthly progress payment requests when assigned to a program, • Possess experience, knowledge, and understanding of methods used throughout construction., • Possess valid Los Angeles City Department of Building and Safety (LADBS) Deputy Licenses in the following disciplines:, • Concrete construction, • Steel construction, • Drilled-in anchors/seismic resistance, • Spray-applied fireproofing, • Professional Experience Level/Other Qualifications, • 5 years or more of experience performing as a LADBS Deputy Building Inspector on large-scale projects., • This includes overseeing and ensuring compliance with building codes and regulations on significant construction projects., • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials.

Job Description Overview PRIDE Industries is a fast-paced company with a mission: To Create Jobs for People with Disabilities while providing high quality, value-added solutions to our nationwide customers. We are currently recruiting to fill the following position: Responsibilities PRIDE Industries Job Description Job: Quality Program Manager Job Code: N02 - PR-Quality Program Mgr HR Title Group: Quality Salary Grade: E13 FLSA Status: Exempt Approval Date: August 2017 SUPERVISES: There may be direct reports with this position. POSITION SUMMARY: Under minimal supervision, the Quality Program Manager (QPM) oversees, manages and reports on all site related Quality Management Systems (QMS) programs, policies, processes, initiatives and operations for the assigned contract. This job class requires comprehensive knowledge of Quality Assurance/Quality Control (QA/QC) functions, continuous improvement, related contract industry standards as well as the ability to organize and budget time and resources while managing multiple projects and priorities. TYPICAL DUTIES: 1. *Coordinate, plan, organize, execute and report on all QA/QC activities for assigned sites’ contractual obligations; serving as the functional expert on all QMS standards, policies and procedures., 2. *Consult with management and customers to effectively implement and monitor the sites QMS program., 3. *Compile, author and report on QA/QC statistical data for customer, local and corporate management reviews., 4. *Analyze, audit and recommend revisions to site core business policies, processes and procedures., 5. *Perform Document Control functions for site QMS documents by authoring, revising and distributing updates., 6. *Coordinate and manage all aspects of the nonconformance, corrective and preventive action programs., 7. *Respond to, investigate, document, track and follow-up on operational customer complaints., 8. *Author and revise site specific Quality Control Plan, processes and procedures per contract terms and modifications., 9. *Participate in various site, customer and regulatory contract meetings and quality related audits and investigations., 10. *Evaluate and determine the course of action for inspection activities that identify nonconformance’s., 11. *Coordinate with management and facilitate meetings to resolve contract quality, production and efficiency issues., 12. *Coordinate and conduct QMS training for site employees and customers to ensure compliance and understanding., 13. *Coordinate Customer Surveys IAW the QMS and site customer survey procedures;, 14. Perform joint government/PRIDE management quality inspections for contract requirement verification., 15. Support the site safety program by working with site personnel and auditing safety activities., 16. Perform other duties and special projects as assigned. • Denotes Essential Job Function MINIMUM QUALIFICATION: • Three or more years of experience in quality;, • General knowledge of assigned line of business/industry skill sets, i.e. carpentry, electrical, plumbing, HVAC, construction, custodial, grounds, and hospital housekeeping;, • General knowledge of QA/QC processes and/or formal certifications in ISO, Six Sigma, Lean, TQM or other preferred;, • Experience with various QA/QC and/or trade tools, equipment, concepts, codes and industry standards preferred;, • Ability to effectively supervise and develop assigned team to meet strategic goals;, • Ability to communicate effectively both orally and in writing; to make presentations and respond to inquiries by senior management, customers, employees, public, and/or PRIDE’s board of directors;, • Demonstrated leadership, organizational, reasoning, problem solving and analytical skills;, • Human relations skills to build effective relationships with team, customers and public;, • Exceptional customer service skills;, • Advanced computer literacy including knowledge of word processing, spreadsheet, database and presentation software;, • Knowledge of business English including vocabulary, spelling, and correct grammatical usage and punctuation;, • Mathematical skills to include the ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations;, • Ability to establish priorities and solve a wide range of business, operational and strategic management problems;, • Flexibility to respond to changing work priorities and handle numerous projects at the same time. EDUCATION REQUIREMENTS: Bachelors in Business Administration or related field A comparable combination of formal education and work experience will be considered. CERTIFICATES OR LICENSES REQUIRED: The following licenses or certificates may be required depending on local, state and/or contract requirements: Customer Clearances Valid Driver's License PHYSICAL REQUIREMENTS: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance: • Utilizing keyboard, • Viewing computer screen, • Bending, kneeling, stooping, squatting and reaching, • May require climbing ladders and/or step stools, • Standing and walking, • Maneuvering in and around the worksite WORK ENVIRONMENT: Work is performed primarily in an office environment with limited privacy and exposure to noise from others conducting business. The remainder of work is performed on job sites in the field, driving to and from worksite. Employees may be exposed to hazardous equipment, toxic substances, noise from equipment, and depending on external weather conditions, wind, rain, cold, and heat. DISCLAIMER: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to this job. Employees are expected to follow their supervisor’s instructions and to perform the tasks requested by their supervisors. At PRIDE, we make a difference in the lives of many, one job at a time. Qualifications Ready to make an impact? Join an organization where business meets purpose, and every role contributes to a greater mission. Apply today at PRIDE Careers and be part of something meaningful. Learn more about who we are and what we stand for at . PRIDE Industries is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, or any other characteristic protected by law. Thank you for considering a career with us—we look forward to connecting with you!

Job Description Project and Position Description The Reporting Manager integrates visual communications, document production, and construction reporting to improve transparency, compliance, and stakeholder understanding of scope, schedule, cost, safety, quality, and operational impacts. Working closely with Project Managers, Office Engineers, Field Engineers, Construction Managers, Community Relations, and Regulatory/Compliance teams, the Reporting Manager ensures all materials adhere to branding, accessibility, and records management standards, and are published through approved channels. Key Identifiers for the Position • Strong foundation in AEC project delivery with experience producing communications in an active construction environment (e.g., airports, transportation hubs)., • Expertise in information design and data visualization for construction KPIs (schedule, cost, safety, quality, logistics, phasing)., • Demonstrated ability to maintain excellent relationships with design and construction professionals and to translate technical content into clear, audience-appropriate materials., • Commitment to high standards of professionalism that enhance team morale and stakeholder confidence. Key Job Duties Program Communications & Design • Plan, design, and produce ads, notices, posters, pamphlets, displays, signage, exhibits, and web content to support project communications, public information, outreach events, and regulatory requirements., • Design and layout brochures, report covers, infographics, and slide decks for technical and administrative reports and presentations., • Develop exhibit boards and presentation materials for briefings, stakeholder meetings, public hearings, and community events. Reporting & Data Visualization • Translate schedule, cost, risk, safety, and quality data into charts, graphs, dashboards, and projection slides suitable for executive briefings and public display., • Maintain standardized visual templates and style guides for monthly, quarterly, and ad-hoc reports., • Partner with Project Controls to ensure KPI accuracy and consistency between narrative and visualizations. Document Production & Records • Coordinate the compilation, editing, and final production of reports (e.g., Monthly Construction Report, Board/Commission packages, progress bulletins, traffic advisories)., • Ensure all materials comply with branding, accessibility and records retention requirements., • Manage version control and archive final deliverables within the PMIS and shared repositories., • Assist with photography/videography coordination and basic asset management as required. Stakeholder Coordination • Work cross-functionally with Project Managers, Office Engineers, Field staff, Safety/Quality, Environmental, and Community Relations to gather accurate source content and approvals., • Support meeting logistics (agendas, exhibits, handouts) and capture action items relating to communications deliverables. Hardware/Software Knowledge • Design/Visualization: Adobe Creative Cloud (InDesign, Illustrator, Photoshop), Acrobat Pro; Bluebeam; Tableau/Power BI (or equivalent) for dashboards; MS Visio., • Office/Presentation: Microsoft 365 (Word, PowerPoint, Excel), Teams/SharePoint; strong skills in template building and advanced formatting. PM/Records: PMWeb (preferred) or similar PMIS for version control and distribution Professional Experience Level/Other Qualifications • 15 years or more experience in preparing graphic display, descriptive charts, brochures or maps for commercial or public use., • Experience in AEC communications/design, construction reporting, or technical publications, preferably on complex, phased programs in active facilities (airport experience preferred)., • Portfolio demonstrating report design, infographics/data visualization, signage, and exhibit materials for technical audiences and the public., • Excellent written and oral communication skills; ability to edit technical content for clarity and audience appropriateness., • Must have a self-starter attitude with proactive, results-oriented focus; and willing and capable to assume additional responsibilities, • Must be able to interface with a variety of people with different technical levels and educational backgrounds, • Must be detail oriented and highly organized Education/Training • Bachelor's Degree in Graphics Designs, Art, or related field preferred. Job Posted by ApplicantPro

Job Description The Contractor shall provide Contract Facility Manager/Building Manager (CFM) support services to the assigned GSA Facility, Field Office or Service Center. Services include: • Inspection and management of federally owned facilities within the Field Office, including maintenance and operational inspections in accordance with applicable GSA property management principles, SOPs, and guidelines., • Inspection and management of leased locations within the Field Office in accordance with applicable GSA lease administration principles, guidelines, and SOPs., • Construction Management (CM) and Project Management (PM) services for repair and alteration projects in both leased and federally owned facilities., • Projects may range from under SAT to the prospectus project limit., • Duties include project estimating, scoping, development, design and/or design review (based on project complexity), inspections, punch list preparation, and project closeout., • The Contractor shall provide a well-trained and experienced candidate meeting the minimum qualifications outlined in this SOW., • The COR will generally be the GSA Field Office Manager or a delegated representative., • The CFM shall report directly to the COR and follow daily schedules and assignments as directed. 1. GENERAL REQUIREMENTS 1.1 Employment and Supervision 1.2 Professional Conduct • The CFM must maintain professional dress and appearance., • The CFM may serve as the primary point of contact representing GSA to tenant agencies. The CFM must: • Perform inspections in machine rooms, roofs, and construction sites., • Perform moderate lifting as required., • Wear appropriate PPE (steel-toe boots, hard hat, coveralls, etc.) provided by the Contractor., • Maintain adequate health insurance coverage., • The CFM shall work an eight-hour shift within core business hours (7:00 AM – 5:30 PM, Monday through Friday, excluding federal holidays)., • Exact shift times must be approved by the COR., • Overtime may be required for construction monitoring, shutdowns, inspections, or emergencies., • The CFM must report to the designated facility specified daily in order for hours to be billed, unless on approved travel., • Travel may be required. 2. INSPECTION OF WORK IN FEDERAL FACILITIES The CFM shall: • Inspect construction and building maintenance contracts (janitorial, cafeteria, mechanical, elevator, and related services)., • Follow GSA PBS Program Guides and attached guidelines., • Document findings using approved GSA inspection report formats., • Conduct follow-up inspections to verify corrective actions. 3. Review contract specifications prior to inspection., 4. Draft deficiency notices and cure letters for GSA signature. All formal correspondence must be issued and signed by a GSA employee. The CFM may coordinate meetings with contractors when authorized by the COR. 3. INSPECTION OF WORK IN LEASED LOCATIONS Under direction of the LAM, LCO, or COR, the CFM shall: 1. Inspect leased facilities to ensure lessor compliance with lease terms. • Review the GSA Lease Administration Guide and applicable SOPs., • Focus inspections on tenant service and customer satisfaction issues. 3. Prepare lease inspection reports and draft correspondence for GSA signature., 4. Coordinate professionally with tenants and lessors. The CFM shall not formally direct lessors; only GSA personnel may issue formal direction. 4. CONSTRUCTION MANAGEMENT (CM) AND PROJECT MANAGEMENT (PM) The CFM shall perform CM and PM services in accordance with GSA PBS Program Guides and Project Management Guidelines. 4.1 Project Responsibilities ● Prepare cost estimates and scopes of work. • Manage budgeting and financial documentation., • Monitor construction activities., • Participate in pre-final and final inspections., • Perform basic CAD drafting and specification writing as required., • Serve as on-site representative during construction activities., • Review design documents and submittals., • Maintain defect and omission lists., • Verify contractor payment requests (value in place and stored materials)., • Prepare written recommendations for acceptance., • Assist with claims analysis and dispute documentation., • Enforce OSHA safety regulations. The CFM shall NOT: ● Authorize contract modifications. ● Make final decisions on claims or disputes. All formal directions must be issued by authorized GSA personnel. 5. CUSTOMER SERVICE RESPONSIBILITIES The CFM shall: • Improve customer and client agency satisfaction., • Maintain and preserve real property assets., • Participate in GSA Tenant Satisfaction Surveys., • Coordinate reimbursable work and ensure funding is in place., • Monitor operating costs., • Serve as property management point of contact for space modifications., • Document inspections and prepare reports for GSA review and signature., • Immediately report dangerous conditions or accidents to the COR. 6. SPECIAL REQUIREMENTS • CFM assigned to the Caribbean Field Office must be fluent in English and Spanish., • The CFM must obtain HSPD-12 federal security clearance., • A government-issued Smart Card is required prior to appointment., • Construction project management; OR, • Managing large commercial/residential buildings; OR, • Managing a large portfolio of leased properties. 7. MINIMUM QUALIFICATIONS The proposed CFM must: 1. Have a minimum of five (5) years progressive experience in: • Demonstrate working knowledge of architectural, structural, civil, mechanical, electrical, fire alarm, and control systems., • Posses:, • A professional degree in engineering, architecture, business, real estate, or related field; OR, • Ten (10) years of relevant management experience., • Demonstrate:, • Ability to manage multiple projects simultaneously., • Strong accounting and organizational skills., • Knowledge of national, state, and local codes., • Ability to resolve issues with contractors, tenants, and agencies., • Provide a resume documenting at least three (3) relevant projects or properties, including:, • Project cost, • Construction duration, • Date of substantial completion, • Scope description, • Challenges encountered, • References for phone numbers 8. SOFTWARE, SYSTEMS, AND TOOLS The CFM shall utilize systems located on the PBS Portal or Local Area Network (LAN), which may include: • Microsoft Suite, • Citrix ICA, • Horizon VPN, • Nuance Converter Enterprise / Foxit, • GSA Lease Management Tool, • Checkpoint VPN, • Cisco IP Communicator, • Google Suite, • Adobe Acrobat Professional, • Internet Explorer, • Other GSA data system tools as required

Job Description About Us: VOALA Helping Our Most Vulnerable Change Their Life Stories Volunteers of America is a non-profit human services organization committed to serving people in need, strengthening families, and building communities. VOALA provides a variety of social services to Los Angeles area communities such as Head Start programs, Upward Bound college prep programs, veterans’ services, homeless shelters, low-income housing program as well as drug and alcohol rehabilitation. Learn more at . PAY RATE: $19.19 - $20.20 Per Hour BENEFITS: VOALA offers competitive medical, dental, vision and retirement benefits JOB SUMMARY AND PURPOSE The Custodian/Grounds performs daily janitorial duties, light building maintenance, and maintenance of the grounds of the facility, reporting any maintenance or safety deficiency to management for correction. Performs all tasks needed to maintain cleanliness, sanitation and safety of the facility interiors and exterior, adhering to janitorial schedules provided DUTIES AND RESPONSIBILITIES • Maintains the interior and exterior of the facility, including building, parking lot and grounds, in good condition, • Daily cleaning of assigned areas, following safety protocols and using appropriate personal protective equipment., • Restock bathrooms, • Responsible for dusting, window cleaning, waste cans, and vacuuming lobby area and hallways., • Performs or assists in minor repairs that might include the following: Carpentry, Plumbing, Interior painting, Refurbishing and cleaning, Landscape and irrigation systems., • Follows daily checklist provided by supervisor; Assures tools and supplies are stocked and appropriately secured in store rooms; maintains cleanliness and order of store rooms, • Keeps exterior grounds in safe and presentable condition, • Responsible for the appearance and up keep of all Shrubs and Plants on the property, • Ensures irrigation system is in operable condition, • Lawn mowing as needed, • Checks facility daily for any safety concerns; understands local and building safety codes and requirements as well as OSHA, health department and EPA requirements; reports all deficiencies to management, • Prepares and sets-up rooms for meetings, classes and events, • Services for this position must be provided on-site. As a result, the position requires incumbents to report to work on-site each day of active employment., • Perform daily janitorial work, checking facility for maintenance or safety issues., • Performs minor repairs, reports deficiencies to management, • Assists maintenance teams when required, • Event set-up, • Keeps inventory of tools and supplies current As service providers to the underprivileged and vulnerable in our community, all employees are considered Mandated Reporters, and must report any instance of physical or sexual abuse to proper authorities. Qualifications REQUIREMENTS: • High school diploma (or GED/High School Equivalence Certificate), • Custodial or building maintenance experience in a shelter or a school setting preferred, • Ability to read and write instructions in English preferred, • Background in construction trades a plus This employer participates in E-Verify as required by the federal government and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. FACILITIES Rocket Lab's Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should. SENIOR / MASTER ELECTRICIAN Based onsite at Rocket Lab in Long Beach, California, the Electrician is responsible for electrical maintenance, infrastructure upgrades, and electrical improvement projects at Rocket Lab's headquarters and Engine Development Center. (Please note: this position can be hired on as a Senior Electrician or Master Electrician level.) WHAT YOU'LL GET TO DO: • Serve as the primary electrical subject matter expert for HQ and the Engine Development Center., • Plan, scope, and execute electrical infrastructure projects including power distribution, panel upgrades, machine installs, lighting systems, and equipment tie-ins., • Coordinate directly with internal customers (Manufacturing, Engineering, EHS, Production, IT) to define electrical requirements, project timelines, shutdown windows, and commissioning plans., • Perform installation, troubleshooting, repair, and upgrade of building electrical systems (120V–480V, 3-phase systems)., • Read and interpret electrical schematics, single-line diagrams, panel schedules, and construction drawings., • Install and modify conduit systems; proficiently bend conduit from ½" to 1 ¼" using manual tube benders (EMT preferred; rigid and flexible conduit experience a plus)., • Size conductors, breakers, transformers, and distribution equipment in accordance with NEC and local code., • Support equipment installations including procurement, layout planning, power drops, disconnects, and final energization., • Manage electrical work orders through JIRA and prioritize based on production impact and safety risk., • Ensure all electrical work complies with NEC, OSHA, and local building code requirements., • Provide oversight of contractors performing electrical work and verify work meets Rocket Lab standards., • Assist with broader facilities maintenance tasks as required, including HVAC support, plumbing repairs, painting, minor construction, furniture relocation, and other general facilities maintenance activities to support site operations. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR ELECTRICIAN: • 8+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility., • High School Diploma, GED OR 12+ years of experience in electrical maintenance in lieu of diploma., • Experience with facilities systems and improvement projects. YOU'LL BRING THESE QUALIFICATIONS AS A MASTER ELECTRICIAN: • 10+ years of electrical maintenance experience in any of the following industries: aerospace, automotive, medical device, or a heavily regulated manufacturing facility., • High School Diploma, GED OR 14+ years of experience in electrical maintenance in lieu of diploma., • Experience with facilities systems and improvement projects. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Licensed electrician or certified electrical professional is highly preferred., • Experience with managing a cleanroom., • Capable of solving complex problems with little to no supervision in a timely manner. ADDITIONAL REQUIREMENTS • Ability to remain focused while working in hazardous environments, while wearing appropriate PPE, • Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position, • Able to lift up to 25lbs. unassisted, • Must be able to climb ladders and be comfortable working in tight spaces., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls., • Must be able to walk or stand for extended periods – 8 hours min, • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces, • Must be able to work at heights, • Must be able to operate scissor lifts/boom lifts #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$30—$50 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Job Summary We are seeking a motivated and detail-oriented Inventory Sit-Down Forklift Operator to join our dynamic warehouse team. In this role, you will be responsible for efficiently handling materials, managing inventory, and ensuring the smooth flow of goods within our distribution center. 1st shift 6am to 2:30pm Pay starts at $21 an hour MUST have experience with computers Sit down Forklift experience required 1st shift available 6am to 2:30pm pay starts at $21 dollars an hour with opportunity if growth, pay increases and bonuses throughout the year. Duties • Safely operate sit-down forklifts to load, unload, and transport materials throughout the warehouse, • Perform order picking using RF scanners and other warehouse management systems to fulfill shipping requirements, • Load and unload trucks efficiently, ensuring accuracy and timeliness in shipping & receiving processes, • Utilize pallet jacks, clamp trucks, and other heavy equipment for materials handling and storage, • Conduct routine inspections of forklifts and heavy equipment to ensure mechanical safety and proper functioning, • Assist with inventory management by organizing stock, conducting cycle counts, and maintaining accurate records, • Proven experience operating sit-down forklifts in a warehouse or distribution setting, • Knowledge of warehouse distribution processes, order picking, and materials handling techniques, • Familiarity with heavy equipment such as cranes, clamp trucks, and pallet jacks, • Understanding of OSHA safety standards related to forklift operation and warehouse safety protocols, • Mechanical aptitude for troubleshooting basic equipment issues, • Experience with warehouse management systems (WMS) and RF scanners for inventory control, • Strong physical ability to perform heavy lifting and repetitive tasks safely, • Prior warehouse supervisor experience is a plus but not required Benefits: • Health insurance Work Location: In person Company DescriptionPayCruit is a disruptive multi-state human capital business. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry. PayCruit is built on a leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively. Our loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow. We understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.PayCruit is a disruptive multi-state human capital business. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry.\r\n\r\nPayCruit is built on a leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively.\r\n\r\nOur loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow.\r\n\r\nWe understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.