Trabajos cut en Rochester, New YorkCrear alertas

Job Description Civil Construction Superintendent Northern Clearing Inc. is currently seeking a Civil Construction Superintendent to join our team. The Civil Construction Superintendent will be responsible for duties including on-site leadership, managing earthwork, utilities, storm drainage to include environmental controls and grading for solar, BESS and substation civil projects. The right candidate will have the knowledge and ability to ensure OSHA and company safety compliance, manage subcontractors, and direct field operations with 15+ years of experience in performing this position. This position will require travel across the U.S. Primary Focus: • Experience and proficiency in Project setup, office, yard, equipment, personnel (union) at project location, • Operations plan and scheduling for project, • Experience and proficiency in reading and understanding all environmental permits and drawings, • Experience and proficiency in reading blueprints and CAD drawings, • Ability to use Trimble Business Center and Propeller Aero for modeling, cut/fill calcs and drone flight data upload and processing, • Experience and proficiency in using Trimble GPS data collector for field data collection and calibration of site to include base station setup, use of repeaters and uploading of GPS machine control data files, • Experience and proficiency in material submittals, • Experience and proficiency in mass excavation cut/fill operations and equipment management for high production projects to include topsoil stripping, stockpiling, reinstatement, rock excavation, classified and unclassified over excavation and backfill, • Knowledge and experience for installation of all types of ponds, basins, storm drainage pipe, outfall structures, trash racks, cut off trenches, anti-seep collars, skimmers, baffles and end treatments for piping to include spillway construction., • Installation of roadway culvert crossings, • Knowledge of geotextile fabrics, geogrids and Geoweb for underlayment, • Access road subgrade preparation (lime, cement stabilization and moisture conditioning), • Understanding and knowledge of all environmental controls, installation and maintenance to include permanent and temporary stabilization, • Understanding and knowledge of compaction testing, sieve analysis reports and geotechnical reports, • Tracking and monitoring production in real time in coordination with project management to include project budget, • Strong written and verbal communication skills, with the ability to communicate well via email and multiple types of correspondence., • Knowledge of Xcel and Microsoft Software programs. More about the Job: • The office location is to be determined and will require travel., • More specific information will be discussed with potential candidates during the interview process., • For more information about Northern Clearing Inc. visit our website at northernclearing.com Job Posted by ApplicantPro

Job Description Elevating the Industry. Building Your Future. At Upstate Roofing & Painting a Roofed Right America, LLC Company, we aren’t just a roofing crew; we are a nationally growing organization. Raising the bar in the commercial and industrial sectors by combining elite craftsmanship with precision, leadership, and growth. As operations expand and impact scales, we’re looking for dedicated individuals who lead with Integrity, act with Responsibility, and never compromise on Safety. If you are looking to build your Skills past the status quo – Trade Up to a Better Crew. Top Reasons to Join: • Hourly Pay Range: $18 to $28, • 401(k) with Company Match, • Comprehensive Benefits Package, • Paid Time Off Position Summary: The Roofer is to provide a service to install, maintain and repair the roofs of commercial buildings in a safe and high performing manner. The Blueprint for Success - Key Responsibilities: • Install, inspect, service and/or repair commercial roofs, • Remove old or damaged material, • Install new materials, such as asphalt shingles, solar tiles, slate, or metal, • Cut and shape roofing materials to proper size, • Follow all OSHA regulations, • Follow local building codes related to pitch and other roof characteristics, • The ability to use hand and power tools, • Reviewing project progress to ensure that deadlines are met., • Interact positively with customers and ensure property is well maintained., • Develop and maintain relationships with stakeholders, communicate project updates, and manage expectations to ensure stakeholder satisfaction., • Additional Roofer duties as needed. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Tools for the Job: Required: • Experience in roofing, construction or related fields., • Attention to detail to quality and safety with a goal of installing correctly and working safely, and a willingness to make improvements., • Ability to read blueprints and technical drawings accurately., • Strong problem-solving skills with attention to detail., • Excellent communication skills for effective collaboration with team members and clients., • Willingness to work on various roofing sites under different conditions., • Ability to climb ladders and maintain their balance while carrying heavy materials Preferred: • A valid driver's license, • Proficient in the safe handling and utilization of ladders. Physical Demands: The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the team member is frequently required to sit; talk or hear; and use hands to handle, or touch objects or controls. The team member is regularly required to stand, climb a ladder and walk. On occasion the incumbent may be required to stoop, bend, or reach above the shoulders. The team member must daily lift 50 to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The performance of the duties of this job are in an outside and office environment. The noise level will vary based on the work environment. Roofed Right America, LLC, is committed to providing equal employment opportunity to all applicants and Team Members regardless of their race, color, religion, age, sex, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state Company DescriptionUpstate Roofing & Painting’s service has been defined by safety, community, and excellence since our founding in 1973. As a trusted painting and roofing company in Rochester, we prioritize the well-being of our team to uphold the highest standards of professionalism. Learn how our commitment to quality and integrity can benefit your commercial property - explore our story and contact us today to learn more.Upstate Roofing & Painting’s service has been defined by safety, community, and excellence since our founding in 1973. As a trusted painting and roofing company in Rochester, we prioritize the well-being of our team to uphold the highest standards of professionalism. Learn how our commitment to quality and integrity can benefit your commercial property - explore our story and contact us today to learn more.

Job Description Job Title: Construction Laborer – Trenchless Pipe Rehabilitation Job Description This Skilled Laborer role focuses on executing trenchless pipe rehabilitation work in commercial, industrial, institutional, and municipal environments. You will work hands-on with cured-in-place pipe (CIPP) installations, robotic branch work, pipe cleaning, milling, and other rehabilitation systems while following project specifications and safety standards. This position is ideal for mechanically inclined individuals who want to learn, grow, and build a long-term career in a specialized trade. Responsibilities • Perform trenchless pipe rehabilitation work, including CIPP lining, pipe cleaning, descaling, and milling in commercial, industrial, institutional, and municipal settings., • Assist with liner preparation, including measuring, cutting, and organizing materials according to project requirements., • Support wet-out processes to impregnate liners with resin in accordance with technical procedures., • Assist with inversion or pull-in-place installation of liners, ensuring proper placement and alignment within the host pipe., • Participate in curing processes using appropriate methods and equipment to achieve specified liner performance., • Perform finishing work such as trimming, reinstating laterals, and ensuring a clean, completed installation., • Operate inspection cameras and related equipment to document pipe conditions before and after rehabilitation., • Use robotic branch equipment as directed to inspect, cut, or reinstate service connections., • Safely operate tools, pumps, generators, compressors, and other job-specific equipment in accordance with safety standards., • Set up job sites, including hoses, cables, access points, containment areas, and equipment staging., • Break down job sites at the end of each project, ensuring tools and equipment are properly cleaned, stored, and secured., • Follow job plans, technical procedures, and directions from crew leads and supervisors to complete work efficiently and accurately., • Assist with troubleshooting mechanical or equipment issues under the guidance of experienced technicians., • Maintain a clean and organized work area, both at the shop and on job sites., • Travel with the crew to various job sites, including occasional overnight assignments as scheduled., • Demonstrate consistent adherence to safety protocols and contribute to a safe working environment for the crew. Essential Skills • At least 1 year of mechanical aptitude gained through job experience or personal hobbies., • Demonstrated mechanical troubleshooting ability with tools, equipment, or machinery., • Willingness to obtain OSHA certification and follow all safety procedures., • Reliable transportation and the ability to meet motor vehicle record (MVR) requirements., • Strong work ethic and the ability to show up consistently with a positive attitude., • Ability to learn and apply technical procedures related to CIPP and trenchless technologies., • Comfort working in construction and field-based environments., • Ability to work effectively as part of a crew, following directions from leads and supervisors., • Physical ability to perform hands-on labor, including lifting, carrying, and working in and around confined or challenging spaces as required by the job. Additional Skills & Qualifications • Experience in construction or related trades is beneficial., • Previous exposure to trenchless technologies, CIPP, or pipe rehabilitation is a plus., • Familiarity with inspection cameras or robotic equipment is an advantage., • Interest in building a long-term career in a mechanical or construction-focused trade., • Willingness to participate in both standard and rate work projects, including overtime when available., • Openness to travel for out-of-town jobs, including occasional 1–2 day overnight stays. Why Work Here? You join a team that invests in your growth and rewards your effort. You benefit from a 401(k) plan with a 3% match, medical, vision, and dental coverage, and profit sharing based on tenure. You have the opportunity to earn overtime regularly and may qualify for a company vehicle. The organization offers structured training, a clear path to develop your mechanical and construction skills, and a supportive environment that values reliability, safety, and teamwork. Work Environment You work primarily in commercial and industrial environments, including new builds and pre-existing facilities. The role follows a first-shift schedule, Monday through Friday, from 7:00 a.m. to 3:30 p.m., with regular opportunities for 5–10 hours of overtime each week. You report to the shop daily and ride with other technicians to and from job sites, fostering a team-based field environment. The work involves operating inspection cameras, robotic equipment, pumps, generators, compressors, and other construction-related tools. Some projects require out-of-town travel, with 1–2 day overnight stays supported by per diem for meals and lodging. The setting is hands-on, equipment-focused, and field-based, suitable for individuals who enjoy active, mechanical work in varied job site conditions. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Jun 23, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description The Fiberglass & Bonding Fabricator plays a critical role in producing high-quality railway and train components through skilled fiberglass fabrication and bonding techniques. As an individual contributor, this role requires precision, technical expertise, and adherence to specifications to ensure durable and reliable composite parts. Periodic check-ins provide guidance while allowing autonomy in day-to-day fabrication tasks. Responsibilities • Prepare materials accurately for fiberglass fabrication processes, • Perform lamination and bonding of composite materials, • Cut and shape fiberglass components according to design requirements, • Execute fiberglass repair on existing components to maintain quality standards Preferred Qualifications • 2+ years of experience in fiberglass fabrication, • Technical certification in composite materials is preferred, • Proficient in fiberglass fabrication and composite bonding techniques, • Skilled in the use of hand and power tools, • Ability to read and interpret blueprints accurately, • Strong attention to detail, • Effective problem-solving skills

Job DescriptionFLOWER CITY GROUP is hiring a GUILLOTINE/CUTTER OPERATOR! Join a fun, successful, and rapidly growing company in the printing and packaging industry! If you’re looking for a place where you can build your skills, contribute to a strong team, and grow your career, this is the perfect opportunity. At Flower City Group, we Hustle, We Own, We Learn, We Invent, and We Believe. Come be part of a culture that celebrates initiative, curiosity, and teamwork. Schedule This position is for our B Shift: Monday–Friday, 12:00 AM (Midnight) - 8:30 AM Candidates must be willing to train on our A Shift: Monday–Friday, 7:00 AM–3:30 PM Training may last up to three months, depending on your learning pace and readiness to transition independently to the C Shift. JOB DESCRIPTION Essential Functions: • Review specifications to determine size and number of cuts., • Measure from edge of sheet using scale to determine incremental cutting positions from guide., • Enter cutting positions in proper order into computer memory., • Remove sheets of printed or unprinted paper stack from the load and place them on the cutter bed. Jog and align sheets against the cutter guide in preparation for cutting., • Activate computer to move sheets into first cut position. Activate double hand switches to begin cutting operation., • Examine cut material for any imperfections and adjust computer program as needed., • Remove finished or pre-finished material from the cutter bed and stack on pallets for shipment to the customer or next operation., • Record job information on load tags and time sheets., • Change knives and lubricate as needed and recommended by manufacturer specifications Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. Requirements/Qualifications: • Perform basic math calculations., • Ability to read and understand written and verbal instructions, job jackets, press imposition and rule-up sheets., • Must be mechanically inclined., • Must have basic electronic and keyboard knowledge., • Extensive lifting and bending actions., • Ability to direct fellow crew members in the overall operation involved in the job. Preferred Education and Experience: • High School Diploma or equivalent AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Summary/Objective: It is the responsibility of the 2nd Press Operator to optimize the profitability of the Company by performing to the highest level of efficiency in the following task categories: maintaining constant quality, make readies, maintenance of equipment and the management of their respective press crew. Through these tasks below, the 2nd Press Operator will ensure that the highest level of productivity is consistently achieved. Schedule Rotates every two weeks • A Shift: Monday–Friday, 7:00 AM–3:30 PM, • B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight) Essential Functions: • Familiarity of a densitometer and its functions. (Density, dot gain, print contrast and hue)., • Pull and hang plates pull job in register., • Cut coating blanket., • Checks grain direction., • Lines up sheet checking for size, straightness, correct pagination, bleed requirements, position of sheet to the HP screen, die vinyl or grain direction. (40-inch Presses), • Checks to be sure proper coating is used., • When needed sets up and runs feeder or assists Feeder Tender., • Watches both sides of sheet for defects (scratches picks water, oil spots, draws, cracks, smashes, missed side guide etc.)., • Make sure the Press checklist is fill out and placed on the last load., • Review and sign off on all fanned out sheets. Competencies: • Troubleshooting/Maintenance, • Technical, • Machine Operation Requirements/Qualifications: • Minimum of 3 years of machine press operation, • Basic math skills, • Ability to work in a fast-paced production environment., • Ability to work well with co-workers in a team environment., • Ability to operate computer-based technology. Preferred Education and Experience: • First Press Operator Certification, • High School Diploma or equivalent, • AAS in a related technical field Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning st-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Basic GD&T skills., • Basic and Advanced Vantage training., • Perform basic repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements • Company Benefits Orientation, • Bloodborne Pathogen, • Company Practices & Policies, • Fire Extinguisher Safety, • Mission, Vision & Values Training, • Hazardous Communication, • Values Based Leadership, • Lock Out/Tag Out Video, • Traveler Sign-Off, • Personal Protection Equipment, • Right-to-Know Training

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description JOB IS LOCATED IN CT. GENEROUS RELOCATION PKG. PROVIDED. Premier printing and marketing company in CT is searching to hire an experienced Print Production Planner to join their team Responsibilities include: • Liaison between clients, sales, and manufacturing ensuring every job runs smoothly from estimate to delivery., • Schedule and plan jobs to keep production on time meeting client specifications., • Compare incoming jobs with estimate specs, flagging deviations and revising as needed., • Prepare purchase orders for outside services, paper, ink, and die-cut materials., • Review bindery instructions, create prepress worksheets, coordinate proofs with customers, initiate mailings, and track deliveries., • Communicate inefficiencies to sales reps or clients proactively., • Oversee production of jobs and stay informed of job status keeping all parties up to date., • Monitor production of proofs, on-time deliveries to clients and timely return for production use., • Work with Estimating to design layouts and production plans for cost-effective results., • Make Sales Reps and/or clients aware of production issues and assist in resolution. Qualifications include: • Minimum 3 - 5 years' experience in print production, planning, and/or estimating., • Strong technical knowledge of prepress, offset and digital printing, mailing, and binding operations., • Working knowledge of ERP system such as EFI Monarch, Hagen, PSI, PACE, etc., • Excellent communication and follow through skills., • Detail oriented and able to multi-task several on-going projects., • Individual and team contributor., • Proficient on MSO. Experience with Adobe Acrobat a plus. Excellent career opportunity with one of the premier printing companies in the NE. Starting salary range $70,000 - $80,000 + benefits, 401k match, and relocation assistance. Company DescriptionNationwide, recruiting firm for the Printing & Packaging industries representing premier firms. We treat candidate information in strict confidence.Nationwide, recruiting firm for the Printing & Packaging industries representing premier firms.\r\nWe treat candidate information in strict confidence.

Job Description Steel fabrication consists of bolting and/or welding parts to main steel members such as beams and columns per the design drawing. Material are move with overhead cranes and forklifts. We prime paint finished products and load trucks for delivery. CNC machines include Ocean Clipper II angle line to process angle iron, Hypertherm Plasma table that process plate parts, Ficep FRC plasma line that cuts beams, tubes and misc shapes, (2) Ficep drill lines with band saws. We also fabricated light industrial steel such as stairs and railings. We are seeking a detail-oriented CNC Machine Operator to operate and maintain CNC fabrication equipment used in structural steel processing. This role is responsible for setting up, operating, and monitoring CNC machinery to cut, drill, and process steel components according to engineering drawings and production specifications. Key Responsibilities • Operate CNC machinery including:, • Angle lines (Ocean Clipper II), • Plasma tables (Hypertherm), • Beam drill lines and band saws (Ficep systems), • Load and position steel materials for machining operations, • Interpret blueprints, shop drawings, and CNC programs, • Monitor machine performance and make adjustments as needed, • Perform routine inspections to ensure accuracy and quality standards, • Move materials using forklifts and overhead cranes safely, • Assist with basic machine maintenance and troubleshooting, • Maintain a clean and safe work environment, • Follow all OSHA and company safety procedures Qualifications • Prior experience operating CNC machinery in a manufacturing or steel fabrication environment, • Ability to read and interpret technical drawings and blueprints, • Strong attention to detail and measurement accuracy, • Mechanical aptitude and problem-solving skills, • Experience with structural steel or heavy industrial materials preferred Preferred Certifications • Forklift Operator Certification, • Overhead Crane Certification, • OSHA 10 or OSHA 30 Safety Certification Physical Requirements • Ability to lift up to 50+ lbs, • Standing for extended periods, • Working around heavy machinery in a shop environment Why Join Us • Work with advanced CNC equipment and modern fabrication systems, • Stable, long-term opportunity with growth potential, • Team-oriented, safety-focused environment, • Be part of a respected AISC-certified steel fabricatorCompany DescriptionJoin Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.

Job Description Commercial HVAC Technician & Sheet Metal Worker We are seeking experienced Commercial HVAC Technicians and Sheet Metal Workers to join our team in Rochester, NY. The ideal candidates will specialize in the installation, maintenance, and repair of HVAC systems and sheet metal components for commercial buildings. This position requires expertise in large-scale systems, attention to detail, and a commitment to safety and quality work. Key Responsibilities: • HVAC System Installation & Maintenance: Install, assemble, and repair commercial HVAC systems, including ductwork, air handlers, chillers, boilers, and ventilation systems., • Sheet Metal Fabrication & Installation: Measure, cut, assemble, and install sheet metal ductwork and components according to project specifications., • Blueprint & Code Compliance: Read and interpret blueprints, specifications, and building codes to ensure proper installation and compliance., • Welding & Fabrication: Perform welding, soldering, and cutting of HVAC ductwork and sheet metal using specialized tools and equipment., • Safety Adherence: Maintain a safe working environment and follow OSHA, company, and industry safety protocols. Qualifications: • Minimum of 3 years of experience as an HVAC Technician or Sheet Metal Worker, specifically in commercial construction., • Extensive knowledge of commercial HVAC systems, ductwork fabrication, and hydronic systems., • Ability to read and interpret commercial blueprints and schematics., • Proficiency in using HVAC-specific tools, including duct fabrication equipment, metal cutting tools/ machines, and welding tools., • Physical stamina to lift heavy materials, climb ladders, and work in challenging environments. Total Compensation up to $72.24 per hour including premium benefits. Company DescriptionGreat time to get involved with this rapidly growing company!Great time to get involved with this rapidly growing company!

Job Description CNC operater. FANUC controls experience a plus. Must be willing to learn to setup CNC Lathes, insert tools, cut jaws, deburring, inspecting. Benefits, earned Vacation, 401K plan. 40 hour 4-1/2 day work week. We contribute to continued education in our industry. We have an NYS apprentiseship program with the ability to earn Journeyman papers. Overtime available. Work hours M-F 7 am - 4:30 pm Friday 7-1:00. Apply in person or submit simple application to 114 West Ave.

Job Description Comfort Windows and Doors is hiring Experienced Installers for residential construction. We work on custom windows, doors, siding, decks, sunrooms, and bathroom remodels. What You’ll Do Install windows, doors, siding, decks, sunrooms, or bath products Use basic tools: saws, drills, multi-tools, caulk gun Measure, cut, and bend metal (brake work) Lift 50+ lbs. and work on ladders Keep the job site clean and safe Work with your crew and communicate with customers when needed We’re Looking For Strong Experience in construction, carpentry, framing, siding, decks, or remodeling Good work ethic and reliable attendance Ability to work outdoors and indoors Team players willing to learn or grow Why Work With Us Full-time, year-round work Industry competitive pay; in addition to Incentive and Bonus Opportunities Annual Increases & Opportunities to advance Health, Dental & vision coverage FREE $10,000 life insurance policy 401k Plan with a dollar-for-dollar company match, up to 4% Generous number of paid time off, including holidays, vacation and sick time Apply Today If you’ve done residential construction, carpentry, siding, windows, doors, decks, or bathroom remodels, we want to talk to you. * The Wage Transparency Law, recently passed by the New York State Legislature, requires disclosure of the starting salary range of compensation for all posted positions. As our positions vary widely, the above listed pay range encompasses all skills and experience levels. Specific pay rates will be decided upon completion of the interview process and determination of job level to be offered. * Comfort Windows & Doors is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job DescriptionCompany Description “It's simple. Hanzo is all about greatness.” Job Description Imagine a Sales Career So Rewarding, It Could Change Your Life. Picture this: You walk into a buzzing barbershop, alive with the sound of scissors snipping and clippers humming. You’re here to meet with some of the best hairstylists and barbers in town, artists who live and breathe their craft. They trust only the highest quality tools—and they rely on someone who knows what they’re doing. That someone is YOU. Welcome to Hattori Hanzo Shears. We’re not your typical sales company, and this is no ordinary sales role. We’re on a mission to find passionate, driven individuals ready to start something big. This isn’t just a job; it’s a career with unlimited earning potential and rewards like nothing you’ve seen before. Here’s Why You’ll Want to Join Hanzo: When you’re with us, it’s about more than just the sale. It’s about building relationships, establishing trust, and helping your clients succeed. And we reward that commitment—big time. • Monthly Bonuses: Earn extra rewards every month for reaching your goals., • Quarterly Bonus Challenges: A chance to push yourself and win even more., • Annual President’s Club Vacations: Exclusive, all-expenses-paid trips to celebrate top performers., • 401k with a 4% Match: Because we care about your future., • Full Medical, Health, and Dental coverage after just 90 days., • 6-Figure Potential: With no cap on earnings, the best in our team make six figures. Who Thrives Here? If you’re enthusiastic, love the thrill of connecting with people, and are ready to make a name for yourself, Hanzo could be the last career move you’ll ever need. You’ll spend your days engaging with true artists, closing multiple deals daily, and making a real impact. Here’s What Your Day Looks Like: • You’ll be out there, meeting incredible hairstylists and barbers, helping them find the tools they trust., • You’ll build relationships that go beyond a one-time sale., • And, as a result, you’ll see your career and income grow every day. So, if you’re ready for a sales role with serious rewards and a chance to be part of something bigger, take the first step. This could be the start of something amazing. Excited to meet you, Hanzo Recruiting www.hanzo.com/careers Qualifications Are you... • A smooth operator with swagger to spare?, • A people person with charm that could melt scissors?, • Quick-witted enough to keep up with flying hair clippings?, • A sales superstar who can close deals faster than a barber's buzz cut?, • Experienced in the art of the pitch (and we don't mean hair dye)? If you nodded so enthusiastically that your hair got messed up, we want YOU! Additional Information Hanzo is nationwide, with territories in every corner of the U.S. and all places in between.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Sets up and operates punch press including blanking, drawing, forming, perforating, etc. Controls proper safety devices, feeds the material into dies and keeps stock well lubricated. Procures proper dies, sets up punch presses and feeds for all types of materials. All types of dies may be set up including compound, multiple, closing, trimming, shearing, drawing, perforating, cut-off, shimmy, coining, extruding, etc. Minimum Qualifications: • Ability to read blue prints a must., • Fluency in verbal and written English, • Ability to use shop math, • High school diploma, GED or equivalent, • Must supply own tools Physical Demands: • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve repetitive motions, • Due to open environment of warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold Specific Duties: • Ensure Punch Press is in full operation during the required work hours, • Inspect material; checking for type and measuring dimensions using a micrometer and a QA tag., • Shear material using a “Traveler”, • Make the part according to specifications on dimension and quantity, • Measure blank or strip using measurement tape or dial caliper, • Use shearing machine as per drawing or instructions, • Set up the punch press (under supervision if necessary) and punch first part, • Ensure that inspection of first and last piece is done by operator and QA, • Run job and check parts using SPC, • Tumble parts and remove burrs, • Spot weld parts, if necessary, • Inspect part according to print, • Get QA approval of part., • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log Required Tool List: • 6” Verniers, • Tape Measure, • Ball Peen Hammer, • Set Allen Wrenches This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job Description Location: Rochester, NY Summary: We are seeking an experienced and innovative manager in the Optics and Photonics space to guide QED’s Applications Engineering team. This leadership role requires strong skills in team management, mentoring, customer support, sales and product development. The successful candidate will collaborate closely with cross-functional teams—including Sales, Customer Support, R&D, Quality, and Manufacturing—to ensure our customers are extracting as much value as possible from our products and that our products are meeting the needs of today’s – and tomorrow’s – customers. At QED, Applications Engineers are the “expert users” of QED’s polishing and metrology products. They are customer-facing, but also support internal development initiatives. They act as process engineers, teachers, and salespeople as they perform their various job functions. Their main activities can be separated into 3 main responsibilities: • Provide process support for existing customers (including polishing/metrology validations during installation, basic & advanced training, process optimization and process troubleshooting), • Provide Sales & Marketing with technical support (including tech support during customer meetings, capability analyses, product demonstrations, trade show support, and marketing material support), • Provide R&D and Engineering with VOC input for new product developments (including defining customer requirements, testing support for new developments, and design review support) Based in Rochester, New York, QED Technologies is a leading capital equipment manufacturer serving the global precision optics industry. Our innovative solutions enable the production of high-quality optical components with superior accuracy. We are committed to driving future growth through innovation, excellence, and customer satisfaction. Essential Duties and Responsibilities: • Team Leadership & Mentorship, • Lead and manage a global team of 6-10 applications engineers and interns from varied backgrounds, providing guidance, coaching, and performance feedback., • Foster a collaborative and innovative team environment, encouraging open communication and knowledge sharing., • Set priorities and schedule activities that span Sales, Customer Support, Manufacturing and R&D, in a dynamic organization, often with competing demands., • Develop/maintain departmental training and process documentation to ensure consistency and quality as new engineers are onboarded., • Customer Experience Center (CEC) Management, • Oversee the operation of QED’s demonstration and training center. This area is where Applications Engineers perform product demonstrations, and training sessions for our products. Ensure room/equipment is maintained in a clean and organized condition, compliant with all of QED’s SH&E guidelines, so as to create an efficient work area that is suitable to “show off” to visiting customers at all times., • Support/schedule machine time for Manufacturing & R&D activities. The CEC is a shared space that other groups use when they need to use or test equipment on our products., • Technical Sales & Marketing Support, • Work closely with the Sales team and potential customers - either directly, or through the team – to provide the necessary technical information they need to close opportunities. This can be through product demonstrations, capability analyses, customer meetings or trade shows., • Customer Demonstration Process Management: Ensure the team provides effective and efficient customer demonstrations, starting from gathering clear goals and requirements from the customer through defining the demonstration plan to maintain the equipment in top-notch condition to effective report writing and customer communication., • Support technical content creation (e.g. white papers, case studies, social media posts, YouTube videos) for the QED’s marketing initiatives., • Publish/present technical papers – either directly, or through the team – at trade shows or conferences to highlight new capabilities of our technology., • Customer Support, • Work closely with our customers – either directly, or through the team – to provide the necessary technical information they need to most effectively utilize the products we sell them. This can be through remote support or onsite support, and come in the form of basic training, advanced training, process optimization, new process development initiatives., • Work closely with Customer Service Manager to ensure all customer requests are getting tracked and closed in a timely manner., • Machine Order Process Support, • Work closely with Sales, Operations and Customer Support to ensure new machine orders are managed properly, from acceptance test definition at order time through installation scheduling and final customer training and machine acceptance., • Engineering & Operations Support, • Provide team member support to various R&D, NPD and CI projects in order bring the Voice of Customer feedback they gain and collect as they work with customers to the product development and qualification initiatives of our company., • Balance the often competing demands of manufacturing, product development, customer support and sales, based on the needs of the business., • Cultivate New Business Opportunities, • Identify and explore new applications and/or markets for QED’s technology, through process development initiatives in the CEC. Work with R&D as necessary to push new developments in fluid, software, or hardware. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Education and/or Experience, • Minimum B.S. in Optical Engineering (or a closely related field of study) with 7+ years of relevant industry experience (MS or PhD preferred)., • Experience in the Precision Optics industry, Photonics industry, Semiconductor manufacturing industry, or other precision manufacturing industries., • Other Skills and Abilities, • Proven experience in managing projects, teams and individuals, • Proven experience in mentoring junior engineers., • Strong leadership, communication, and presentation skills for global audiences., • Ability to manage multiple priorities and drive results in a fast-paced environment, • Technical Excellence, • Drive the team to develop a deep understanding of our technologies do that they understand the “why’s” not just the “what’s” of our products so that they can respond to our customer’s process challenges quickly and effectively, • Cultivate a “measure twice, cut once” mentality so that customer demonstrations and other activities are done right the first time, • Set high standards for performance and communications (e.g. customer reports). Lead by example. Work Location The primary work location for this position is QED’s main headquarters, 1040 University Avenue, Rochester, NY 14607. Employee may be permitted to work from home for some tasks, at the discretion of the employee’s manager. Applicants must reside within commuting distance of our Rochester, NY location. Relocation will not be provided for this role. Travel Domestically and internationally (~10-15%), may be required in order to perform the essential functions of this position. All candidates must possess a current US passport and not have restrictions regarding travel. QED Technologies is an equal opportunity employer. We value diversity. However, due to our ITAR status, we are unable to provide visa sponsorship at this time. Therefore, all applicants must be permanently authorized to work in the United States and will not require visa sponsorship now or in the future. The salary offered will be determined based on comparing the selected candidate's education, experience and special skills, with the current QED employee population to ensure internal compensation equity.

Job Description Who are Re:Build Optimation and Re:Build Manufacturing? Re:Build Optimation is an industrial engineering design and fabrication firm in Rochester, New York. We work with customers in many industries to design and deliver unique automated industrial machines and skids to meet their requirements. As a part of the Re:Build Manufacturing company we are rebuilding America's manufacturing base and creating meaningful, sustainable jobs in areas that have been deindustrialized over the past 20-30 years. Our strategy is to employ technology, systems, deep financial resources, and best management practices to compete and win as manufacturers in the global market. Re:Build Manufacturing is a family of industrial businesses combining cutting-edge, enabling technologies, operational superiority, and strategic M&A to build America’s next generation industrial company. Re:Build leverages a deep expertise in operations management and technology to supercharge performance of its subsidiaries by implementing core technologies across industrial platforms in diversified growth markets. We seek to revitalize the U.S. manufacturing base over the coming decades, creating substantial opportunities for our employees and the communities where we operate. If you like a fast-paced environment where individuals can stretch and be challenged with a diverse set of projects, we offer a great deal of variety and empower our staff to take on as much responsibility as they can handle, offering a helping hand and experienced-based coaching and the support of a highly competent team. Our goal is to enable our employees to achieve their fullest potential, and through our association with Re:Build, provide avenues for personal and professional growth. Who are we looking for? NOTE: Location - Rochester, NY Do you thrive by being involved in all phases of pipe installation, assembly, materials & systems? Do you enjoy autonomy and seek to collaborate with capable teams? If your answer to these questions is 'yes', then this role may be right for you. What you get to do! • Cut pipes using handheld and power tools like hammer and chisel, cutting torch, pipe cutter, and pipe cutting machine, • Assemble and install tubes, fittings, and non-metallic attachments - Join pipe using threads, soldering, brazing, or cemented connections, • Inspect pipe systems and machinery to detect machinery malfunctions - Operate material movement machinery to lift pipes, support equipment, and heavy machinery, • Work closely with engineers, designers, programmers, planners, project managers, and customers to provide the best outcome for projects, • Consistently follow workplace safety procedures including NFPA 70E and participates in toolbox talks, safety audits, and related safety functions, • Immediately identify correct, and/or report any unsafe acts, conditions, or incidents in a timely manner, • Work as a member of a cohesive staff, helping coach and mentor less-experienced members, • Possess a strong work ethic and display a high level of craftsmanship - Perform other related duties as required and assigned What you will bring to the team • A successful candidate will be an individual with strong technical experience, blueprint reading, plumbing codes and trade mathematics., • Strong attention to detail and accuracy are necessary to successfully complete the assignments., • Our projects require communication skills for effective interaction with clients, the engineering team, and strategic partners. Interpersonal and collaborative team-building skills are required., • Must be physically able to perform the work of a Pipefitter: climb and work from heights, work in confined spaces, and lift and/or move heavy objects., • Will be required to work in hot and cold environments and in all weather conditions., • Able to read and write in English, possess basic computer and communication skills., • Regular full-time employee., • 40-hour work schedule, days., • Must be able to work a flexible schedule, including overtime and occasional travel. Compensation Range: Hourly rate for this position is expected to be between $27.00 to $55.00 based on education and years of experience. This role is eligible to participate in our annual bonus plan and long term incentive plan. The BIG payoff We are a company who is going to make a difference in the industries and the communities where we operate. Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company! We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Job DescriptionFLOWER CITY GROUP is hiring a Estimator! Join a fun, successful, and rapidly growing company in the printing and packaging industry! If you’re looking for a place where you can build your skills, contribute to a strong team, and grow your career, this is the perfect opportunity. At Flower City Group, We Hustle, We Own, We Learn, We Invent, and We Believe. Come be part of a culture that celebrates initiative, curiosity, and teamwork. Summary/Objective: The basic function of the Estimator is the development and maintenance of detailed quantities and accurate cost standards for the use in developing cost/price estimates for all projects assigned to this position. Responsible for the accurate development of estimates from the prints and specifications or design and develop specifications from data as supplied by the Sales Rep, Project Managers, and/or other portal to the system. This role can me remote or have office space at one of our locations in Rochester, NY. This will include, but not be limited to: • Developing an efficient layout on an as needed basis., • Estimating film prep, press running, paper, bindery, prepress cost, plates, and make readies., • Estimating minimum final cost to include any sales commissions. Essential Functions: • Requests pricing on material for estimating as required. Ensures prompt hard copy quotes are received, routed, and filed., • Ensures that all interested parties receive pertinent information in a timely and accurate manner., • Assists in setting material and process standard prices., • Responsible for determining what phases or parts of the project will be sub-contracted to others, securing quotes, and verifying the reasonable competitiveness of such quotes., • Responsible for the development of cost estimates within the time frame as assigned by the Estimating & Planning Manager., • In developing a take off by the supplied plans and specifications, if the Estimator sees a way to cut costs, he is to calculate the original according to specifications and then submit an alternate proposal., • Develop full knowledge of Flower City Group's estimating and job costing computer systems., • Follow up on bids as necessary to include following up with Sales Reps and Project Managers on bids that were not accepted., • Reviews job cost summary reports and evaluates the profitability of all completed assigned jobs. Undertakes corrective actions as required., • Maintains a high proficiency in computer aided estimating., • Enhances the image and reputation of Flower City Group, Inc. by exercising sound and ethical business practices in all relations with customers, employees, suppliers and other third parties., • Maintains accurate files on all matters pertinent to the estimating function., • Prepares reports requested by the Estimating & Planning Manager in an accurate and timely manner., • Coordinates with the Estimating & Planning Manager, Finance and Accounting to ensure a balance between price, inventory levels and sound cash management., • Maintains cooperative working relationships with all company employees. This includes "inter" and "intra" departmental employees. Also included are all customers, contractors, owners, suppliers, etc., • Is alert to opportunities to change estimating methods which can benefit the company, and researches and develops these ideas as appropriate., • Seeks guidance and direction as necessary for performance of duties and demonstrates good judgment in investigating problems., • Maintains cooperative working relationship with supervisor. Demonstrates ability tactfully handle difficult situations and consistently shows ability to recognize and deal with priorities., • Performs all other tasks/duties in an independent manner with little supervision as they are assigned and recognizes and performs duties although not directly assigned – assists others as needed. Competencies: • Must be able to read, write and speak English fluently. Must possess an in-depth knowledge of the industry., • Must be able to work under time and budgetary pressures., • Must be able to work with people, negotiate, analyze problems, and translate company goals into Physical Demands: • Sitting, standing, and/or walking for up to eight hours per day., • Frequently required to lift and/or carry up to 30 lbs., • Occasionally required to push and/or pull up to 50 lbs., • Occasionally required to stoop, kneel, crouch, crawl, and climb., • Regularly required to talk and/or hear, see, and perform repetitive motion., • Required to see color and use depth perception. Preferred Education and Experience: • High School Diploma or equivalent, • Associates or bachelor's degree in Business Administration or Printing/Packaging; however, extensive estimating experience in a quality printing environment may suffice. AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Framing Technology is in search of a dedicated team member who takes pride in their work and wants to grow with a company that values teamwork, customer satisfaction, and honesty. The ideal candidate is dependable, detail-oriented, and committed to contributing to a positive and productive work environment. As the CNC Operator you will be working under the direction of the CNC Department Supervisor. The CNC Operator uses CNC (Computer Numerically Controlled) machines to cut and machine various metals and plastics, such as aluminum, steel, and polycarbonate. Responsibilities include reading prints, properly setting up each machine before beginning work, and verifying parts are accurate once complete. We expect each CNC Operator to be proficient at setting up and running all the CNC machines in our warehouse. Communication and team cooperation is essential to the success of the warehouse and CNC team and is expected in all aspects of the job. Responsibilities: • Assist with setup and operation of a variety of CNC machines., • Plan routing by analyzing work orders, prints, BOMs, and other required paperwork., • Select and maintain proper tooling., • Select raw materials., • Learn the program cut sequence for each router from SolidWorks drawings., • Input offsets during job runs., • Cross-train in other departments and/or perform other warehouse tasks as assigned by your supervisor., • Perform standard maintenance tasks., • Maintain efficient output for all jobs., • Maintain a clean, organized, and safe working environment., • Communicate with other team members about any issues, needed equipment or tooling, or problems with jobs. Qualifications: • High school diploma or GED required, • Working knowledge of machinery and measurement tools, • Strong communication and interpersonal skills, • Familiarity with machining callouts and CNC applications, including waterjet, press brake, and VMC, • Excellent analytical and problem-solving skills, • Proficiency in time management, including the ability to prioritize, • Ability to maintain discretion and confidentiality with sensitive information, • Ability to demonstrate attention to detail and good record keeping, • Show initiative, thoroughness, and accuracy, • Perform all duties independently with minimal supervision, • Assume responsibility for staying aware of changes in company policies and procedures, • Maintain cooperative working relationships with supervisors and other staff members. Demonstrate a positive attitude. We offer a competitive benefits package that includes multiple health insurance options, dental and vision coverage, a flexible spending account (FSA), company-paid short-term disability and life insurance, a company-matched 401K, as well as paid vacation and sick time. #hc218481

Job DescriptionCNC Operator: We are looking for a CNC Operator with a minimum of 3+ years experience, to operate a Thermwood 3-axis router. The successful candidate will be required to set-up, cut, and label materials according to the production schedule. The operator will be expected to monitor quality, effectively communicate, and troubleshoot processes. Requirements: • Ability to machine all types of materials (aluminum, mdf, plywood, plastics), • Ability to accurately read and interpret blueprints and measuring devices, • Ability to perform quality checks on product, • Proficient in CNC Machine operations: vacuum pumps, dust collection, machine interfaces, monitoring, tracking, and labeling cut lists, • Ability to organize, label, and monitor inventory levels, • Ability to work assigned hours plus overtime as needed, • Must have strong attention to detail, • Must be able to effectively communicate and collaborate with various teams, • Must be reliable with a strong work ethic to work independently to meet deadlines, • Comply with all applicable OSHA, EPA, local regulatory laws, and company safety policiesApplicants must have a good work ethic and be willing to occasionally work overtime. 8+ hour shifts, Monday through Friday. Some weekends may be worked if overtime is needed. Fluent in English and Spanish would be a plus! We offer competitive salary and benefit packages - commensurate with experience. If you feel that you have any of these skills and want to join a great team please submit your resume, or stop in at 2370 Firehall Rd., Canandaigua, 14424 to fill out an application.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Senior Panel Builder to join our Rexel, USA team in Rochester, NY! Summary: The Senior Panel Build Technician is responsible for assembly and/or wiring of electrical control panels from component parts, modification of standard materials to customer specifications, and kitting of materials per customer requirements. This role is also responsible for packaging and labelling the finished work products for delivery to customers to ensure safe shipment and adequate identification by the end user. What You'll Do: • Assembly and/or wiring of electrical components (non-energized), • Utilize various hand and power tools to complete work tasks, • Measure, cut, and label material, • Package finished goods for shipment, • Share maintenance duties for the shop area such as taking inventory, cleaning, etc., • Ensure Quality Management policies and procedures are upheld, • Read and interpret schematics, instructions, and diagrams, • Other duties as assigned Job Duties Disclaimer: The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications What You'll Need • 4+ years of related experience, • Exposure to or experience with blueprints, electrical schematics, wire charts, or engineering drawings, • High School or GED - Preferred, • Other - Preferred, • Trade School Knowledge, Skills & Abilities • General knowledge of electrical products and/or control panels, • Knowledge of established Quality Management procedures, • Ability to read and use a tape measure, ruler, and level, • Physical ability to manipulate hand tools (pliers, screwdrivers, meters, etc.), • Ability to safely operate power tools as required (handheld drill, tabletop saw, band saw, grinder, etc.), • Ability to perform mathematical calculations related to measurements, • Ability to organize and prioritize job tasks, • Attention to fine detail, ability to closely follow written documentation and directions, and the ability to work collaboratively with others to meet deadlines Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Frequently – 21% to 50%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Frequently – 21% to 50%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Frequently – 21% to 50%, • Up to 25 pounds - Frequently – 21% to 50%, • Up to 50 pounds - Occasionally – up to 20% Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Frequently – 21% to 50%, • Handles or works with potentially dangerous equipment - Occasionally – up to 20%, • Travels to offsite locations - Occasionally – up to 20% Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law. For the state of New York only, the pay range is $20.00 to $26.00, depending upon qualifications, experience and other considerations permitted by law. Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. Essential Job Duties: • Visually inspect and test machinery and equipment., • Listen for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to troubleshoot and diagnose problem or repair the machine., • Dismantle defective machines and equipment and installs new or repaired parts., • Clean and lubricate shafts, bearings, gears, and other parts of machinery., • Install and repair electrical apparatus such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains physical structure of all facility equipment and grounds., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers., • Sets up and operates machine tools such as a lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs, fixtures, and tools., • Operates cutting torch or welding equipment to cut or join metal parts., • Fabricates and repairs counters, benches, partitions, and other wooden structures., • Completes other special assignments as required., • Review work orders to determine immediate actions required., • Perform assigned preventative maintenance on a timely basis., • Operate forklift, lift truck, and scissor lift. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Associate's degree (A. A.) or equivalent from two-year college or technical school; or two to four years related experience and/or training; or equivalent combination of education and experience. Computer Skills: Proficient with Microsoft Office Suite, Internet Software knowledge, Work Order software, OINSIGHT preferred; Ability to learn new software as needed. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 2:45 p.m.-11:15 p.m.

Job DescriptionDescription: Summary: Under the supervision of the Director of Property Management/Maintenance Supervisor, the Cleaner is responsible for the maintenance of all properties owned and managed by IADC/* IAAL (per Maintenance Agreement with IAAL). Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. GROUNDS • Pick up litter from grounds and clean up broken glass around buildings and curb., • Pull weeds/spray week killer as needed., • Upkeep of property shrubs and cut grass as needed., • Edge property once each year, • Make sure exterior lighting works., • Shovel and salt sidewalk as needed., • Purchase and deliver salt to property, as needed., • Remove paper and debris from around exterior of building., • Remove graffiti from building and garage. CLEANING • Clean and disinfect fixtures in all bathrooms., • Clean mirror in all bathrooms, • Empty all waste baskets from offices and bathrooms, replacing liners and removing trash from building., • Stock bathrooms with paper supplies and soap, as needed., • Wet mop with disinfectant all vinyl, tile floors, bathrooms, reception area, hallways, stairwell, kitchen floor, and copier room, • Sweep stairwells., • Spot treat carpet for stains, • Spot clean doors, walls, and light switch plates, as needed., • Vacuum carpeted areas, all area runners at all doors and all offices, • Wipe clean door and door jams, as needed., • Clan entrance door glass and all glass inside and out as needed., • Dust tops of all vertical/horizontal surface and filing cabinets., • Clean kitchen, including appliances., • Remove Tape from walls and ceilings., • Remove cobwebs throughout, • Replace light bulbs and fluorescent tubes., • Remove dead bugs from light fixtures. REPORT AND REPAIRS NEEDED • Remove scuff marks from floors, office furniture, in common areas, as needed., • Clean water fountains, • Clean elevator-damp mop floor, spot clean walls, and polish button panel, clean tracks WEEKLY • Wet mop all stairwells, • Spray buff floors. ANNUALLY • Strip and wax all vinyl floor surfaces., • Shampoo all carpeting in house. QUARTERLY • Clean interior and exterior of all windows AS NEEDED • Other items to make a safe and sanitary environment or requests by staff and supervisors., • Strip and wax floors., • Deliver supplies from complete emergency and non-emergency repairs as assigned by Supervisor., • Complete special projects on schedule., • Respond to special requests for pick-up and delivery of supplies and equipment., • Purchase materials needed to complete work, with pre-approval of Supervisors., • Maintain positive relationships and open lines of communication with IADC personnel located at each site., • Maintain inventory of cleaning supplies, maintenance tools, and equipment., • Maintain agency owned equipment in good working order., • Be on call during non-working hours to receive emergency calls related to break-ins, fire alarms, or emergency repairs., • Must have reliable transportation., • Any other duties assigned by supervisor. Authority: This position holds a high degree of independence within the framework of the agency’s policies and procedures. The individual must be resourceful and able to display initiative and understanding of safety systems. Must keep immediate supervisor abreast of issues and concerns which merit intervention from higher level management staff Requirements: Position Qualifications: Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Accuracy - Ability to perform work accurately and thoroughly., • Customer Oriented - Ability to take care of the customers’ needs while following company procedures., • Meticulous - Ability to pay attention to the minute details of a project or task., • Diversity Oriented - Ability to collaborate effectively with people regardless of their age, gender, race, ethnicity, religion, or job type., • Ethical - Ability to demonstrate professionalism conforming to a set of values and accepted standards., • Reliability - The trait of being dependable and trustworthy., • Communication, Oral - Ability to communicate effectively with others using the spoken word., • Communication, Written - Ability to communicate in writing clearly and concisely. Skills and Abilities: • Experience in cleaning buildings., • Ability to work independently., • Physically able to carry and lift heavy equipment., • Must possess a valid NYS driver’s license and meet Ibero Vehicle Operator Requirements., • Bilingual Spanish and English preferred but not required., • GED/High school diploma or equivalent., • Minimum of 2 years’ experience in building maintenance., • Able to perform repairs and building renovations as requested., • A combination of training and experience other than the specified, if judged to be adequate for the job, may be accepted by the Executive Vice-President and CEO. Physical Demands: The position does require occasional standing, squatting, lifting of up to approximately 50 lbs. and frequent standing. By signing below, I hereby acknowledge receipt of my job description. I am aware that continued employment with Ibero-American Action League, Inc. is contingent on my adherence to the policies outlined in the employee handbook and my ability to function within the parameters of the job description. Furthermore, I acknowledge that any questions regarding this job description will be brought to the attention of my immediate supervisor. Employee Signature: Date: Ibero American Development Corporation/Ibero American Action League is committed to the policy of equal employment opportunity. This policy expressly prohibits discrimination on the basis of sex, race, color, religion, creed, national origin, age, marital status, sexual orientation, disability, gender identity or expression, genetic predisposition or carrier status, domestic violence victim status, veteran status or status as a member of any other protected group or activity. Revised 5/28/2026.

Job DescriptionJob Description: Event & Show Coordinator Company: Spearhead Builds LLC Location: Upstate New York (Syracuse, Rochester, Buffalo) Position Type: Part-Time / Weekend-Based Reports To: General Manager Role Overview Spearhead Builds LLC is a premier acrylic bath, decking and outdoor living contractor dedicated to "Spearhead Spec" construction—structural standards that exceed building codes. We are seeking a high-energy, organized, and results-driven Event & Show Coordinator to be the face of our brand at home shows, Chamber of Commerce events, and community festivals. The ideal candidate is a "logistics ninja" who can manage a display from registration to teardown while possessing the sales savvy to convert foot traffic into high-quality project leads. Key Responsibilities Event Scouting & Logistics: Identify, vet, and register for high-traffic local events (Home Shows, Town Days, County Fairs). Operational Execution: Transport, set up, and tear down the Spearhead Builds display (including structural cutaways, banners, and digital portfolios). Lead Generation: Proactively engage event attendees, educate them on our superior structural standards, and schedule in-home consultations. Brand Ambassadorship: Maintain a professional booth appearance and ensure all marketing materials are stocked and displayed effectively. Reporting: Track lead data accurately and report weekly performance metrics to management. Compensation & Performance Incentives This position is designed for a top-performer with a weekly pay cycle. Event Base Rate: $500.00 flat rate per show (covers setup, running, and teardown). Lead Bonus: $25.00 for every "Kept Appointment" (consultations that actually take place, calculated weekly) Sales Commission: 1% of the total signed contract value (paid in lieu of the $25 lead bonus for converted sales). Example: A $35,000 deck sale results in a $350 commission. Paid after contact signed and initial deposit received. Expenses: Mileage allowance provided for travel between the warehouse and event locations. Growth Potential: Based on performance and volume, this role has the potential to expand into a management position with an allocated assistant for larger multi-city events. Required Qualifications Highly Organized: Able to manage a calendar of events and logistical details without oversight. Outgoing Personality: Comfortable initiating conversations with strangers and "hunting" for leads in a crowded environment. Reliable Transportation: Must have a vehicle capable of transporting booth materials (or a valid driver's license to operate company transport). Physical Ability: Able to lift and move display components (banners, table displays, wood samples). Professionalism: Punctuality and a "clean-cut" professional appearance are mandatory; you represent the quality of our craftsmanship. About Spearhead Builds We don’t build "standard" projects. We build legacies. Our "Spearhead Spec" ensures our customers get the safest, most durable bathroom and outdoor living spaces in New York. We are a fast-growing company with a goal of $1M in Year 1 sales—we want you to help us get there. Powered by JazzHR SigB9iPzdq

Job Description Overview Retail Merchandiser Come join SFS as a Retail Merchandiser independent contractor and enjoy all the benefits of creating your own schedule. This flexible environment is created by the clients we service, they provide a window of time instead of a specific days, allowing you to set your own schedule. As a Merchandiser, you can service various products, conduct resets, product cut-ins, returns, POP placement and other general merchandising activities. We have available part-time, on-going work servicing a wide-variety of clients/retailers for weekly, bi-weekly, and monthly visits. Let’s get started as an independent contractor, it’s quick & easy; CLICK APPLY Things to Consider: • You control when and how much you work, • Create your work schedule, • Be your own BOSS What we Offer: • Competitive pay, • DailyPay – work today, get paid tomorrow, • Free Enrollment Required Qualifications: • Merchandising and/or retail experience, • Available weekday daytime hours, • Able to read plan-o-grams, • Able to carry and lift up to 40 lbs. repeatedly, • Able to bend, stoop and stand for extended periods, • Internet access with an active email address, • Android or iOS smart phone and/or tablet for wireless reporting, • Report client work completions on the same day as service, • Reliable transportation, some travel involved SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract over 3 million retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it.

Overview: Retail Merchandiser Come join SFS as a Retail Merchandiser independent contractor and enjoy all the benefits of creating your own schedule. This flexible environment is created by the clients we service, they provide a window of time instead of a specific days, allowing you to set your own schedule. As a Merchandiser, you can service various products, conduct resets, product cut-ins, returns, POP placement and other general merchandising activities. We have available part-time, on-going work servicing a wide-variety of clients/retailers for weekly, bi-weekly, and monthly visits. Let’s get started as an independent contractor, it’s quick & easy; CLICK APPLY Things to Consider: • You control when and how much you work, • Create your work schedule, • Be your own BOSS What we Offer: • Competitive pay, • DailyPay – work today, get paid tomorrow, • Free Enrollment Required Qualifications: • Merchandising and/or retail experience, • Available weekday daytime hours, • Able to read plan-o-grams, • Able to carry and lift up to 40 lbs. repeatedly, • Able to bend, stoop and stand for extended periods, • Internet access with an active email address, • Android or iOS smart phone and/or tablet for wireless reporting, • Report client work completions on the same day as service, • Reliable transportation, some travel involved SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract over 3 million retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it.

Overview: Retail Merchandiser Come join SFS as a Retail Merchandiser independent contractor and enjoy all the benefits of creating your own schedule. This flexible environment is created by the clients we service, they provide a window of time instead of a specific days, allowing you to set your own schedule. As a Merchandiser, you can service various products, conduct resets, product cut-ins, returns, POP placement and other general merchandising activities. We have available part-time, on-going work servicing a wide-variety of clients/retailers for weekly, bi-weekly, and monthly visits. Let’s get started as an independent contractor, it’s quick & easy; CLICK APPLY Things to Consider: • You control when and how much you work, • Create your work schedule, • Be your own BOSS What we Offer: • Competitive pay, • DailyPay – work today, get paid tomorrow, • Free Enrollment Required Qualifications: • Merchandising and/or retail experience, • Available weekday daytime hours, • Able to read plan-o-grams, • Able to carry and lift up to 40 lbs. repeatedly, • Able to bend, stoop and stand for extended periods, • Internet access with an active email address, • Android or iOS smart phone and/or tablet for wireless reporting, • Report client work completions on the same day as service, • Reliable transportation, some travel involved SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract over 3 million retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it.

Overview: Retail Merchandiser Come join SFS as a Retail Merchandiser independent contractor and enjoy all the benefits of creating your own schedule. This flexible environment is created by the clients we service, they provide a window of time instead of a specific days, allowing you to set your own schedule. As a Merchandiser, you can service various products, conduct resets, product cut-ins, returns, POP placement and other general merchandising activities. We have available part-time, on-going work servicing a wide-variety of clients/retailers for weekly, bi-weekly, and monthly visits. Let’s get started as an independent contractor, it’s quick & easy; CLICK APPLY Things to Consider: • You control when and how much you work, • Create your work schedule, • Be your own BOSS What we Offer: • Competitive pay, • DailyPay – work today, get paid tomorrow, • Free Enrollment Required Qualifications: • Merchandising and/or retail experience, • Available weekday daytime hours, • Able to read plan-o-grams, • Able to carry and lift up to 40 lbs. repeatedly, • Able to bend, stoop and stand for extended periods, • Internet access with an active email address, • Android or iOS smart phone and/or tablet for wireless reporting, • Report client work completions on the same day as service, • Reliable transportation, some travel involved SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract over 3 million retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it.

Schedule: Part time Availability: Afternoon, Evening (Including Weekends). Age Requirement: Must be 18 years or older Location: Rochester, NY Address: 3195 Monroe Avenue Pay: $16.50 - $17 / hour Job Posting: 06/12/2026 Job Posting End: 06/29/2026 Job ID:R0280906 how you’ll make the difference Our customers choose Wegmans for the helpful people in our stores, help with delicious meals, and the freshest ingredients. As a member of our Restaurant Foods team, you are at the heart of helping people make great meals easy. In this role, you’ll help educate our customers about the exceptional ingredients and products we offer and work as part of a team to create high quality products. If you have a passion for food and enjoy working in a fast-paced environment, then this could be the role for you! what will you do? • Build relationships with customers and provide incredible service by addressing their needs in a timely and effective manner, • Cut, prepare, and serve a variety of hot and cold foods to customers, • Prepare, package and assemble meals, • Help to maximize sales potential by using effective and proper procedures for food preparation, storing, rotating, stocking, and merchandising prepared items At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. Comprehensive benefits* • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals, • LiveWell Employee & Family program to support your emotional, work-life and financial wellness Our employees have put us high on Fortune 100 Best Companies to Work For® list every year since it was first produced in 1998. Discover what it means to work for a mission-driven, values-based company where YOU make the difference. *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position. + At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. Comprehensive benefits* • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals, • LiveWell Employee & Family program to support your emotional, work-life and financial wellness Our employees have put us high on Fortune 100 Best Companies to Work For® list every year since it was first produced in 1998. Discover what it means to work for a mission-driven, values-based company where YOU make the difference. *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position.

Schedule: Part time Availability: Morning, Afternoon, Evening (Includes Weekends). Age Requirement: Must be 18 years or older Location: Rochester, NY Address: 1750 East Avenue Pay: $16.50 - $17 / hour Job Posting: 06/16/2026 Job Posting End: 06/30/2026 Job ID:R0279920 Our customers choose Wegmans for the helpful people in our stores, help with delicious meals, and the freshest ingredients. As a member of our Restaurant Foods team, you are at the heart of helping people make great meals easy. In this role, you may work in a variety of positions within departments such as Pizza, Sub Shop, Sushi, Salads, Asian Foods, Market Cafe and more. You'll be part of a dynamic, fast-moving team and have the opportunity to make a difference in our customers' shopping experience every day. Through your enthusiasm and passion for food, you’ll help create the warm, upbeat atmosphere our customers enjoy while helping serve the delicious food they love. What You'll Do • Build relationships with customers and provide incredible service by addressing their needs in a timely and effective manner, • Cut, prepare, and serve a variety of hot and cold foods to customers, • Prepare, package and assemble meals, • Help to maximize sales potential by using effective and proper procedures for food preparation, storing, rotating, stocking, and merchandising prepared items At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. Comprehensive benefits* • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals, • LiveWell Employee & Family program to support your emotional, work-life and financial wellness Our employees have put us high on Fortune 100 Best Companies to Work For® list every year since it was first produced in 1998. Discover what it means to work for a mission-driven, values-based company where YOU make the difference. *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position. + At Wegmans, we’ve always believed we can achieve our goals only if we first fulfill the needs of our people. Putting our people first and offering competitive compensation, comprehensive benefits and a wide range of meaningful perks is just the beginning of what defines a rewarding career at Wegmans. Comprehensive benefits* • Paid time off (PTO) to help you balance your personal and work life, • Higher premium pay rates for working overtime, on Sundays, or on a recognized holiday, • Health care benefits that provide a high level of coverage at a low cost to you, • Retirement plan with a 401(k) match, • A generous scholarship program to help employees meet their educational goals, • LiveWell Employee & Family program to support your emotional, work-life and financial wellness Our employees have put us high on Fortune 100 Best Companies to Work For® list every year since it was first produced in 1998. Discover what it means to work for a mission-driven, values-based company where YOU make the difference. *Certain eligibility requirements must be satisfied, and offerings may differ based upon area or the company and/or position.

Job DescriptionFLOWER CITY GROUP is hiring a GUILLOTINE/CUTTER OPERATOR! Join a fun, successful, and rapidly growing company in the printing and packaging industry! If you’re looking for a place where you can build your skills, contribute to a strong team, and grow your career, this is the perfect opportunity. At Flower City Group, we Hustle, We Own, We Learn, We Invent, and We Believe. Come be part of a culture that celebrates initiative, curiosity, and teamwork. Schedule This position is for our B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight) Candidates must be willing to train on our A Shift: Monday–Friday, 7:00 AM–3:30 PM Training may last up to three months, depending on your learning pace and readiness to transition independently to the B Shift. JOB DESCRIPTION Essential Functions: • Review specifications to determine size and number of cuts., • Measure from edge of sheet using scale to determine incremental cutting positions from guide., • Enter cutting positions in proper order into computer memory., • Remove sheets of printed or unprinted paper stack from the load and place them on the cutter bed. Jog and align sheets against the cutter guide in preparation for cutting., • Activate computer to move sheets into first cut position. Activate double hand switches to begin cutting operation., • Examine cut material for any imperfections and adjust computer program as needed., • Remove finished or pre-finished material from the cutter bed and stack on pallets for shipment to the customer or next operation., • Record job information on load tags and time sheets., • Change knives and lubricate as needed and recommended by manufacturer specifications Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. Requirements/Qualifications: • Perform basic math calculations., • Ability to read and understand written and verbal instructions, job jackets, press imposition and rule-up sheets., • Must be mechanically inclined., • Must have basic electronic and keyboard knowledge., • Extensive lifting and bending actions., • Ability to direct fellow crew members in the overall operation involved in the job. Preferred Education and Experience: • High School Diploma or equivalent AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

This position supports sales efforts at a Sherwin-Williams floorcovering store and coordinates installation through independent contractors to service wholesale floorcovering customers. In this role, you will assist in scheduling installations and ensure installation is conducted consistent with expectations. The individual selected for this role will be expected to work at Store #5248, located at: 834 Emerson St Rochester, NY, 14613-1804. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. • Support the sales efforts at a Sherwin-Williams floorcovering store, servicing wholesale customers., • Assist the Branch Manager in developing and implementing floorcovering installation plans to assist in meeting the store's budgeted sales and profit goals, • Assist Sherwin-Williams sales representatives in field measurements including cut sheets, seam diagrams, and product specifications, • Ensure all customer orders are accurately measured and cut, • Perform on-site inspections of installations to ensure customer satisfaction, • Ensure all installer transactions are handled properly through store computer operating system and records are properly maintained, • Determine floorcovering installation training needs and require training as appropriate Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must have a valid, unrestricted Driver's License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodationPreferred Qualifications:, • Have at least a High School diploma or GED, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling floorcovering and/or floorcovering products, • Have previous work experience installing floorcovering, • Have the Carpet and Vinyl Installation Certification by the Carpet and Rug Institute, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish#SHWSales

Job DescriptionHere at GoNetspeed, we believe in the power of connectivity. We believe that life doesn’t wait for us to catch up. We believe that providing the fastest and most reliable Internet to the communities we serve means committing to the present and building for the future. And we believe that our amazing team of employees are the key to our future and vision of connecting communities for today and for whatever comes next. If this excites you, come and join our team. Design, Engineer, and redline the Fiber network infrastructure routes for new communities, utilizing 3GIS Fiber Management Tool using GoNetspeed standards.Create splice packages for construction using 3GIS.Coordinate and communicate with other departments and contractors such as pole permit contractors and fiber construction.Produce splice packages for repairs and cut-over plans using 3GIS.Assist in engineering, financial planning and documentation of network builds as well as budgets.Assist in tracking of make-ready bills and applications. Required Skills:Project management experience required.Proficiency in using Microsoft Office suite of applications.Experience with splicing procedures.Must possess extensive knowledge of outside plant construction.Proven planning and organization skills in a dynamic and high growth work environment. Education:Bachelor’s Degree or 5 years in telecommunication industry related to project design and Outside Plant Engineering. GoNetspeed is an equal opportunity employer and does not discriminate on the basis of age, sex, gender identity, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability. Thank you for choosing GoNetspeed as your potential next employer! We know you have other options when selecting an employer of choice and are so glad you chose to apply with us.

Assist Sherwin-Williams sales representatives in field measurements including cut sheets, seam diagrams, and product specifications. This position supports sales efforts at a Sherwin-Williams floorcovering store and coordinates installation through independent contractors to service wholesale floorc

Cut, thread, and bend pipes using advanced tools and techniques. Weld, solder, or join pipes using approved methods. Install, repair, and maintain plumbing systems, including pipes, fixtures, drains, and water heaters.

Jun 10, 2026 Greece, NY, US, 14616 Company: Tops Pay Rate Starting at: Level $[[custPayScale_obj]]/ hr Rates of pay are determined by previous experience and labor contract seniority. The mission of all Tops associates is to adhere to the Tops vision of providing a friendly neighborhood store that saves the customer time and money. Meat Cutter is responsible for handling meat and meat products. Cutter will receive, process, cut, trim, scrape, package, tie, wrap, weigh, price, and label meat products Cutter is responsible for setting an example in providing attentive and courteous customer service. • Provide remarkable customer service when attending to customer needs, • Must have adequate knowledge of the preparation of different cuts of meat, • Achievement of financial goals such as sales and gross profit maximization as well as minimization of shrink and supply expense, • Adhere to company policy through proper processing, preparation, and packaging of product, • Maintain a "clean as you go" work area, • Follow all Federal, State, and Local regulations as well as company policies regarding Meat operations, safety, and sanitation, • Ensure proper temperatures are maintained in cooler, prep area, freezer, and cases and are in working condition, • Maintain adequate meat supplies, • Maintain proper case conditions, including cleaning, stocking, straightening, and rotating product, • Must be at least 18 years of age, • Certified Meat Cutter, • Ability to read, write, and perform basic math functions, • Possess basic computer skills, • Possess strong communication skills Operation of the following: • Knives, • Computerized Scales, • Bandsaw, • Patty Machine, • High Pressure Cleaner, • Pallet Jack, • Grinder, • Cubing Machine, • Walkie Stacker, • Wrapping Machine, • Baler/Compactor Our Company does not discriminate against individuals on the basis of race, color, national origin, religion, sex, affection or sexual orientation, disability, age, marital status, liability for military service, status as a veteran, gender identity or expression, genetic information, pregnancy, and any other characteristic protected by applicable federal, state, or local laws. Should your hours and availability better fit the needs of another store or desired shift, we may consider your application for another location or shift.

Job DescriptionFull-Time | Year-Round Work | Competitive Pay & Benefits COMFORT WINDOWS & DOORS is hiring experienced Siding Installers to join our growing team. If you're a skilled installer looking for steady work, great benefits, and opportunities to advance, we'd love to talk with you. Why Join Comfort? Full-time, year-round work Competitive pay based on experience Overtime opportunities Performance bonuses and incentives Annual pay increases Health, dental, and vision insurance FREE $10,000 life insurance policy 401(k) with company match up to 4% Paid holidays, vacation, and sick time Advancement opportunities and promotion from within What You'll Do Install residential siding, soffit, fascia, trim, and exterior finishes Remove and replace existing siding materials Measure, cut, bend, and fit materials accurately Install window and door wraps and custom trim Operate tools and equipment safely Maintain clean, safe, and organized job sites Deliver quality workmanship and excellent customer service What We're Looking For Experience installing vinyl, aluminum, Hardie Board, or similar siding products Strong carpentry and exterior remodeling skills Ability to work safely on ladders and scaffolding Reliable, detail-oriented, and quality-focused Ability to work outdoors in varying weather conditions Build Your Career With Comfort Windows & Doors Join a company that values craftsmanship, rewards hard work, and provides the stability of year-round employment. Apply today and become part of a team committed to quality and customer satisfaction. Comfort Windows is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Residential Siding Installer, Vinyl Siding Installer, Aluminum Siding Installer, Hardie Board Installer, Exterior Siding Specialist, Home Siding Installation, Residential Construction Siding, Siding Crew Member, Siding Technician, House Siding Jobs, Siding Laborer, Experienced Siding Carpenter, Soffit and Fascia Installer, Window and Door Trim Installer, Exterior Cladding Installer, Cedar Shake Installer, Lap Siding Installer, Custom Siding Installer, Siding Removal and Replacement, Trim and Wrap Installer, Flashing and Sheathing Installer, Housewrap Installer, Exterior Home Renovation, Residential Exterior Finishing, Home Exterior Specialist, Residential Remodeling Installer, Siding Foreman, Siding Mechanic, Cladding Installer, Construction Installer – Siding, Remodeling Construction Jobs, Exterior Installer Jobs. Renewal by Andersen, Erie Home, Alure Home Improvements, Power Home Remodeling, Window World, Universal Windows Direct, Home Depot, Lowes, ABC Seamless, DaBella, Champion Windows, LeafFilter, LeafGuard, Pella.

Job Description General Construction Carpenter & Equipment Operator Reports To: Project Manager / Site Supervisor FLSA Status: Non-Exempt Employment Status: Full Time (Onsite) Salary: $30-$35 per hour based on experience Schedule: Full-Time; hours vary based on project needs and site schedules Location: Rochester | Multiple Commercial Job Sites (travel may be required) Benefits: 401(k) plan, Health benefits available POSITION SUMMARY: The General Construction Carpenter & Equipment Operator is responsible for performing skilled carpentry work on commercial construction projects while operating heavy equipment to support job site operations. This role requires a combination of hands-on building experience and equipment operation, with a strong focus on safety, precision, and productivity. The ideal candidate is reliable, detail-oriented, and experienced in both construction and machinery use, with the ability to work efficiently in fast-paced job site environments. ESSENTIAL FUNCTIONS Responsibilities include, but are not limited to: Carpentry Duties • Measure, cut, and assemble wood, metal, and other materials, • Construct frameworks, walls, floors, and roofs for commercial structures, • Install doors, windows, drywall, and finishing elements, • Read and interpret blueprints, drawings, and specifications, • Ensure all structures are level, plumb, and meet code requirements, • Perform repairs, adjustments, and modifications as needed Equipment Operation • Operate heavy equipment such as skid steers, forklifts, and backhoes, • Load, unload, and transport materials across job sites, • Perform routine equipment inspections and basic maintenance, • Follow all safety procedures and guidelines while operating machinery QUALIFICATIONS & REQUIRMENTS: • Proven experience in commercial carpentry, • Experience operating construction equipment (certifications preferred), • Ability to read and interpret blueprints and construction documents, • Strong knowledge of construction methods, materials, and tools, • OSHA safety knowledge (OSHA 10 or OSHA 30 preferred), • Ability to lift heavy materials and work in physically demanding environments, • Willingness to travel between job sites as needed Core Skills • Strong attention to detail and precision, • Mechanical aptitude and problem-solving ability, • Time management and ability to meet project deadlines, • Ability to work independently and as part of a team, • Strong commitment to safety on job sites PHYSICAL DEMANDS: This position requires frequent standing, walking, bending, lifting, and use of tools and machinery. The role involves lifting heavy materials and performing physically demanding tasks in various job site conditions. WORK ENVIRONMENT This position operates on commercial construction sites, both indoors and outdoors. Employees are exposed to varying weather conditions, noise, dust, and heavy equipment. Travel between job sites may be required. SAFETY RESPONSIBILITIES Comply with all company, local, state, and federal safety regulations Utilize proper personal protective equipment (PPE) at all times Identify and report unsafe conditions and ensure timely resolution Follow all safety procedures when operating tools and heavy equipment Spoleta Construction Corp. is an Equal Opportunity Employer and complies with ADA regulations as applicable.

Responsibilities: Prepare and cut meat for sale, ensuring quality, safety, and efficiency on the shop floor.

Job Description • We are hiring immediately for full and part time COOK positions., • Location: Helio Health - 1850 Brighton Henrietta Townline Road, Rochester, NY 14616 Note: online applications accepted only., • Schedule: Full and part time schedule. Weekdays, weekends, holidays, days, and evenings. More details upon interview., • Requirement: Batch cooking and line cooking experience required. *Internal Employee Referral Bonus Available • Pay Range: $19.00 per hour to $20.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1531221. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID: 1531221 [[req_classification]]

Job Description Overview Tradesmen International is immediately hiring skilled Mason's for projects located in or around Rochester, NY. This is a first shift opportunity and the pay rate is $25-$30/hour based on experience and skill level. If you are a Mason and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Reading blueprints or drawings, • Break or cut material to size, • Lay block or brick, • Mix mortar or grout, • Spread mortar or grout, • Clear excess mortar or grout with trowels Requirements: • 5+ year Mason experience, • Must be able to read and interpret blueprints Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description J&B Installations, Inc. is a commercial and industrial roofing contractor specializing in EPDM, PVC, and TPO membranes. We are family owned and operated and have been the leading commercial roofing company in New York State for over 45 years. J&B Installations is located in Skaneateles, NY with jobs located throughout the greater Central New York area. This position is responsible for installing, repairing, and maintaining the roofing systems of commercial buildings such as offices, factories, schools, hospitals and warehouses. Commercial roofers work with various types of roofing materials, including asphalt, metal, and membrane systems, and are skilled in working with both flat and sloped roofs. Essential Job Duties and Responsibilities: (Additional duties may be assigned) • Installation of single ply roof systems such as EPDM, TPO, PVC, • Installation of single ply and BUR roof system details and flashings, • Ability to interpret drawings, and follow written and verbal instructions, • Follow manufacturer specifications during installation, • Flat Insulation and Tapered insulation layout is a plus, • Load, unload, and store materials safely, • Cut and shape roofing materials to fit specified areas, • Abide by all safety protocols and regulations are followed, including proper use of harnesses, scaffolding, and other safety equipment, • Work with fall protection systems, ladders, and lifts to access high areas, • Adhere to OSHA (Occupational Safety and Health Administration) guidelines Requirements Minimum Qualifications: • 2-5 years experience in commercial roofing preferred, • Must have own transportation to and from job sites, • OSHA 10 certification. Can be acquired online, • Must have own hand tools Knowledge, Skills, and Abilities: • Ability to interpret construction blueprints, diagrams, and roofing plans., • Understanding the different types of commercial roofing systems (e.g., TPO, EPDM, PVC, built-up roofing, metal, etc.) and materials used in construction, repair, and maintenance., • Knowledge of OSHA regulations and workplace safety protocols, including fall protection, ladder safety, and equipment handling., • Understanding the proper use of roofing tools (e.g., power tools, hand tools, pneumatic guns) and equipment (e.g., scaffolding, ladders, hoists)., • Basic math skills to calculate areas and measure materials., • Ability to communicate effectively with team members and supervisors, including explaining issues and project updates., • Ability to work collaboratively with a team of other roofers and contractors to complete projects efficiently and safely., • Ability to work in physically demanding conditions, including lifting heavy materials, working at heights, and withstanding hours of outdoor work., • Ability to assess and identify risks associated with roofing work, ensuring safety and quality standards are maintained throughout the project. Benefits Why work for J&B Installations? • Family owned and operated, • Competitive starting pay rate $23.00 - $38.00, depending on experience, • Prevailing wage jobs (Rate varies based on county) $45.00 - 74.25/hr., • Comprehensive Medical Insurance, • 401k retirement plan, • Profit Sharing, • Opportunity for advancement J&B Installations is an equal opportunity employer.

Job Description Mark IV Enterprises is looking for a strong and reliable Field Operations specialist to help us with general duties at our residential apartment and commercial sites. Responsibilities: • Perform grounds keeping and building maintenance duties, • Mow lawn either by hand or using a riding lawnmower, • Cut lawn using hand, power or riding mower and trim and edge around walks, flower beds, and walls, • Landscape by planting flowers, grass, shrubs and bushes, • Apply pesticide to rid grounds of pests such as mosquitos, wasps, ticks, and others, • Apply fertilizer to the ground to enhance growth, • Shovel snow from walkways and sprinkle salt on ice to prevent falls, • Sweep walkways of debris, • Trim shrubs and pull weeds, • Cut down tree limbs that pose a danger, • Rake, mulch, and prune as needed, • Water plants and grass as needed, • Apply and spread mulch, • Exterior painting, • Other duties as assigned Requirements: • Experience with landscape installations a plus, • Experience with chainsaw operation a plus, • Ability to regularly lift a minimum of 60 pounds, shovel, rake and other landscape / hardscape tools, • Ability to stand, walk, kneel, push, pull, and bend for the majority of the workday, • Positive attitude and willingness to be part of a team, • Desire to learn new things and ability to follow directions The pay range for this role is $19.00 - $21.00 per hour. This is the range that we in good faith believe is the range of possible compensation for the role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. About Mark IV Enterprises Mark IV has been one of Rochester’s leading developers for nearly 60 years. We have developed and constructed over 6,000 single-family homes, luxury residential apartments and townhomes, including more than 2,500 units within the Legacy Independent Senior Living Communities, and more than 1,000,000 square feet of commercial and light industrial space. Mark IV is a family-owned and operated business that places great importance on hiring and retaining top-level professionals who can work together to achieve the best results. We value teamwork and collaboration, and want employees who do too! We employ technology and innovation to streamline our processes, including digital marketing, online maintenance request / tracking system, online rent payment system, online training program for all employees, and property management software. We continuously improve our properties to attract and retain great tenants. Schedule: • 8 hour shift 7:30 am to 4:00 pm, • Day shift, • Monday to Friday 7:30 am to 4:00 pm Monday through Friday

Job DescriptionNow Hiring for Sioux Falls, South Dakota:Concrete Cutting Operators – Join Our Family at All States Concrete Cutting! Are you a skilled Concrete Cutting Operator looking for a stable, rewarding career with a company that values your expertise? Or perhaps you have solid construction experience and are ready to specialize and grow with a leader in the industry? All States Concrete Cutting, a family-owned business serving South Dakota and the surrounding 5-state area since 1999, is looking for dedicated individuals to join our team! We pride ourselves on offering a great work environment where we reward our employees for a job well done. When you join All States Concrete Cutting, you're not just taking a job; you're becoming part of our family. What We Offer: • Year-Round Stability: Enjoy consistent, full-time work, Monday through Friday, with up to 55 hours in the summer and 40 hours in the winter. No more worrying about seasonal layoffs!, • Competitive Pay & Growth: Start earning from $30-40 per hour, depending on your experience. We believe in investing in our team, offering ample opportunities to grow your skills and increase your pay as you advance. Plus, there's plenty of overtime available to boost your earnings!, • Comprehensive Benefits Package: We care about our employees' well-being. Our benefits include:, • 6 Paid Holidays, • 3% Retirement Match, • Excellent Health Insurance (50% paid by company), • Cell Phone Allowance, • Diverse & Challenging Work: As a full-service concrete cutting, drilling, and demolition contractor, every day brings new challenges. You'll gain valuable experience in:, • Wall Sawing, • Core Drilling, • Slab Sawing, • Hand Sawing, • Concrete Removal & Breaking, • Robotic Demolition (electric), • Interior Excavation (electric), • And other duties as assigned, ensuring your skills are always expanding. What We're Looking For: We're seeking reliable individuals who are ready to hit the ground running. • A valid Driver’s License is required., • Must be able to lift up to 100 pounds., • Must be 18 years or older., • 5+ years of specialized concrete cutting experience. If you're ready to make a significant impact and build a lasting career with a company that values hard work and dedication, we want to hear from you! Apply today and cut your path to success with All States Concrete Cutting! #hc198598

Job Description Seal & Design, Inc. is a family owned company founded and located in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. Supervises, coaches, and trains Production Associates to ensure efficient operation of machines through work planning and assignment, job set-up, material selection, tool, machine and facility maintenance and problem solving. Pay Range: $25-$30/hour · LMA - Leads, Manages and holds accountable all direct reports o Actively participates in the vetting, selection and onboarding process o Monitors efficiency and productivity to ensure expectations are met or exceeded o Provides training on equipment o Provides hands-on trouble shooting assistance o Communicates the daily schedule via daily huddles o Conducts regular coaching (formal and JIT) o Conducts performance reviews and facilitates disciplinary actions as necessary · Meets or exceeds department KPI’s o Safety, Quality, Efficiency, 5S · Facilitates continuous improvement processes to create efficiency and reduce costs · Effectively utilizes MRP software for planning and scheduling · Sets up jobs in accordance with departmental needs to ensure maximum efficiency and quality · Limits job write offs with regards to material and equipment usage · Ensures that all materials are available and ready for fabrication at the machine location · Performs first-piece inspection for all new fabrication runs, when necessary · Qualifies first-piece fabrication product and performs random quality checks as indicated by the quality specifications; has the authority to stop production when needed to correct quality problems · Completes routine auditing and inspection of shop floor activities to ensure compliance with manufacturing, customer and quality requirements · Initiates the non-conformance process; identifies preventive actions and continual improvement opportunities · Interfaces with Sales Department to understand all dimensional and customer specifications in order to resolve any issues and updates to specific requirements · Ensures that dies are maintained and stored properly; moves dies between equipment and die racks · Ensures that preventative maintenance is current and performs maintenance functions as necessary · Enforces safety policies and practices to ensure culture of health and safety; identifies safety hazards and works with management team on corrective actions Requirements · Associates degree (AA) in a technical discipline and 1-2 years related experience, or equivalent combination of education and experience · Proficiency working in a computer supported environment with business software and Microsoft office programs · Ability to read and interpret blueprints, use simple math and use basic hand-held measuring tools · Mechanical/technical aptitude · Excellent written and verbal communication skills · Strong organizational, problem-solving, and analytical skills; able to manage priorities and workflow; able to multi-task · Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm COMPANY CORE VALUES: S SELF-MOTIVATED – Take initiative and ownership; strive for excellence E ENGAGED – Leverage your individual talents to embrace the vision; practice teamwork and deliver results A ADAPTABLE – Challenge the status quo to continually improve and conquer problems and opportunities L LOYAL – Stay resolute to our cause of serving customers and our team S SINCERE – Honor commitments; respect deadlines; do what you said you would do when you said you would do it; live the golden rule JOB COMPETENCIES: · Leadership · Performance Management · Results Driven · Problem Solving · Communication Proficiency · Time Management · Critical Thinking · Planning and Organizing · Technical Capacity PHYSICAL REQUIREMENTS: · Continual use of hands; constant standing, walking, reaching, bending and lifting · Clear close vision and ability to identify and distinguish color variations · Ability to lift up to 50 lbs. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Referral program, • Vision insurance

Job Description SALON MANAGER - Earn $25 to $50 per hour WHAT WE OFFER If you’re looking for an opportunity to #UnleashYourPotential as a leader and Salon Manager, you’ve come to the right place. Leading with style, kindness, compassion, and care puts you a cut above the rest. We might be just what you’re looking for. WHAT YOU’LL DO • You’ll be the heartbeat of the salon managing all operations and providing leadership and tools for success., • Leading by example, you’ll help your staff increase their clientele and the business. You will focus on the profitability of the salon and teach stylists the ins and outs of business., • You will set the example as well as provide all hair care services offered by Cost Cutters and ensure the highest quality is provided for each guest., • You will act as a coach and mentor to bring out the best in salon employees ensuring there is always a positive work environment., • You will hire, recruit, train, and handle conflicts and client complaints with ease and professionalism. WE’D LOVE TO HEAR FROM YOU IF YOU MEET THESE QUALIFICATIONS • You lead by example, are customer service at your core, and can resolve challenges with professionalism., • You know how to bring out the best in others by being the best yourself in training, developing your team, creating a positive work environment, providing guidance on business and technical competency matters, and always keeping the salon’s bottom line in mind., • You have a current cosmetology or barber license as required by state/provincial regulations., • You can and want to work a flexible schedule, including evenings and weekends., • You are tech savvy and can perform administrative tasks. You may be closing out the system at the end of the day., • You need to know how to read, write, and do basic math., • You need to be available to travel to mandatory meetings and training sessions, including overnight travel. PHYSICAL REQUIREMENTS • You need good eyesight to observe a guest’s hair, including close vision, color vision and ability to adjust focus., • If you enjoy moving around and staying active you can do that here. You’ll be standing, lifting, and reaching for the stars. You need to be comfortable with lifting, bending, and performing repetitive movements, occasionally lifting 10-25 lbs., • We use chemicals and fragrances in our treatments which you will smell. You must be ok with fragrances and chemicals. We offer a base pay rate of $16.50 an hour with additional bonuses, so the pay range you could be earning is $25 to $50! for all open positions DISCLAIMER: “You are submitting your information for potential employment opportunities with an independent franchisee of Regis Corporation or one of its subsidiaries (collectively “Regis”). If hired, you will be a direct employee of the franchisee, not of Regis. Franchisees are independent business owners/operators who set their own wage and benefit programs which can vary from Regis or other franchisees. Only the franchisee is responsible for employment matters at the salon including hiring, firing, discipline, supervision, staffing, scheduling, wages and benefits. Regis will not receive a copy of your employment application and will have no involvement in any hiring or other employment decisions.”

Things to Cut When Money Gets Tight - Make the Most of Your Income!!Everyday Expenses That Add Up Small daily purchases can quietly drain your budget over time. Cutting back on just one or two of these habits can free up hundreds — or even thousands — of dollars each year without making major li

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th