Educational software jobs in North Tonawanda, New YorkCreate job alerts

Job Description Job Summary: The Automotive Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. They will also oversee the work of any apprentice technician assigned to them. Seeking Expert Level "A" Technician Toyota Master Level certified preferred TOP TIER PAY WTH A FLEXIBLE SCHEDULE NYS Inspectors License MANDATORY Essential Job Duties and Responsibilities: (Additional duties as assigned) • Receive repair orders from Team Leader and take to stall area., • Perform work as outlined in repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose the cause of any malfunction and perform repair., • Communicate with the parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Advise service advisor and/or Team Leader immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicle when required or refer to the Team Leader, keeping in mind that the customer’s vehicle should not be used for personal errands., • Supervise the work of any apprentice as assigned., • Attend factory-sponsored training classes., • Keep abreast of factory technical bulletins., • Ensure that customers’ cars are kept clean., • Keep the shop area neat and be able to always account for all dealership-owned tools. Return special tools to tool kit in tool room., • Understand and follow federal, state, and local regulations, such as those governing the disposal of hazardous waste., • Be familiar with MSDS location and information. Must wear and/or use all provided protective items, including eye protection, guards, etc., • Road test vehicle to quality check work performed as necessary., • Maintain CSI in top 10% of group., • Adhere to dealership policies and procedures set forth by dealership management and manufacturer specifications. Required Experience and Education: • High School Diploma or General Educational Diploma (GED), • Knowledge of automotive repair and maintenance., • ASE certification preferred. Additional Requirements: • Valid New York State Driver License. Required Skills and Attributes: • Ability to read and comprehend instructions and information., • Working knowledge of all aspects of repairs for vehicles., • Ability to interpret vendor catalogs., • Must have knowledge of machines, tools including their designs, uses, repairs and maintenance., • Time-management and organizational abilities., • Problem-solving and critical thinking abilities., • Attention to detail. Equipment, Machines and Software Used: • Computer software: Microsoft Office to include Word, and Outlook. Physical and Mental Requirements: • Ability to sit, stand, walk, talk, hear, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Will stand and move throughout the dealership facility (lot, showroom, service department, offices) for most of the shift. Will spend time outdoors showing vehicles to prospective customers and to drive vehicles in traffic during test drives Physical Exertion: • Exerts up to 50 pounds of force occasionally, and/or up to 70 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Light exertion can involve sitting, walking and/or standing most of the time. Environmental Conditions: • Work is performed in a dealership service department., • Occasional weekend and evening hours are required., • Will be exposed to noise, vibrations, dust, paint, cleaning solutions and other hazardous and non-hazardous materials. Hazards and Safety Precautions: • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time Mechanical Design Engineer at our Tonawanda, NY location. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. Responsibilities • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor, • Have specific knowledge of project routings and elevate potential issues to supervisor, • Actively participate in project kick-off meetings, • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams), • Identify discrepancies or lack of information in available project documentation to supervisor, • Understand and adhere to product design standards and guidelines, • Select and source common mechanical components, • Develop complete definition of mechanical components for communication to vendor for purchasing, • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation, • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits, • Understand in-house fabrication and testing capabilities. Design products for manufacturability, • Utilize Syteline ERP as required throughout project, • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details, • Support production during fabrication and assembly phases of projects, • Identify Bill of Materials for product designs and select the proper components that meet the customer specifications, • Collect as-built information as required and track design updates to implement on future projects, • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance, • Manage multiple projects and balance requirements to keep all jobs on schedule, • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills, • Work with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs as required Requirements: • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university, • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques, • Experience in complex custom equipment design, • Previous manufacturing floor and design exposure is a plus, • Two (2) years of fulltime verifiable experience in the field Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionDescription: Carrier Processing Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment and custom fluid solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a Project Engineer at our Tonawanda, NY location to support the Hebeler-Howard Marten (HHM) division. This full-time, exempt position is responsible for the coordination and completion of assigned engineering projects including analyzing customer requirements for equipment selection. Please visit https://hebelerhowardmarten.com/ to see the products and capabilities of HHM. Schedule Monday-Friday, 8 a.m.- 5 p.m., Some remote work is possible. Responsibilities • Aid in project administration from beginning to end., • Complete/support completion of cost estimates for new opportunities and sales efforts., • Analyze customer project requirements and communicate to engineering and production., • Direct and manage project development from beginning to end., • Single point of accountability to oversee, direct and manage deliverables of projects to customer from end to end of project., • Collaborate with vendors/suppliers on pricing, productivity ideas and material substitutions., • Approve vendor/supplier deviations., • Create Design Change Notice(s) (DCN) for customer driven scope changes to internal teams., • Track project scope changes and communicate costs to customers for review/approval., • Work with Syteline ERP System or other manufacturing software to create /load part numbers and material routings, update job information and pricing as requirements change., • Act as liaison between CPEG customers and all departments within CPEG., • Facilitate internal Design Review meeting with Engineering & Designers to review compliance with customer requirements., • Review & Share Product Improvement Trackers (PIT Sheets) to Engineering and Design Teams., • Facilitate and Schedule Project Kickoff meetings with internal teams., • Assesses cost effectiveness of products, projects or services., • Submit cost savings ideas (internal and externally)., • Meet with existing and potential customers., • Supporting the Customer Service team, where applicable., • Writing and follow-up of non-conformity reports & MRRs where applicable., • Represent the customer (point of customer) during design & fabrication of projects., • Support customer and 3rd party witness points / inspections at CPEG facilities.Requirements:, • Associates degree required in Engineering, project management or related field. Bachelor’s degree preferred., • Minimum two (2) to four (4) years’ verifiable experience in the field or in a related area., • Able to travel to Canada to facilitate work on projects manufactured in that location, • Design skills, familiarity with CAD, NX or Inventor, • Awareness of manufacturing methods and procedures., • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met., • Have excellent communication skills, both written and verbal., • Able to work cooperatively with other project team members as well as customers;, • Intermediate to advanced proficiency level in Microsoft Word, Excel and Outlook; as well as Adobe Acrobat and Windows., • Able to carry out detailed written or oral instructions., • Able to understand proper handling of all paperwork required in department, including reporting of time, • Able to manage a number of projects at one time with frequent interruptions, • Able to function and concentrate in a busy, noisy environment Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. Hebeler-Howard Marten Manufacturing LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job Description Job Summary: The Automotive Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. They will also oversee the work of any apprentice technician assigned to them. Seeking "B" level Technician Prefer you have NYS Inspectors License or be willing to work towards obtaining it * Advancement opportunity for motivated candidates to become expert level "A" technician* Essential Job Duties and Responsibilities: (Additional duties as assigned) • Receive repair orders from Team Leader and take to stall area., • Perform work as outlined in repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose the cause of any malfunction and perform repair., • Communicate with the parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Advise service advisor and/or Team Leader immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicle when required or refer to the Team Leader, keeping in mind that the customer’s vehicle should not be used for personal errands., • Supervise the work of any apprentice as assigned., • Attend factory-sponsored training classes., • Keep abreast of factory technical bulletins., • Ensure that customers’ cars are kept clean., • Keep the shop area neat and be able to always account for all dealership-owned tools. Return special tools to tool kit in tool room., • Understand and follow federal, state, and local regulations, such as those governing the disposal of hazardous waste., • Be familiar with MSDS location and information. Must wear and/or use all provided protective items, including eye protection, guards, etc., • Road test vehicle to quality check work performed as necessary., • Maintain CSI in top 10% of group., • Adhere to dealership policies and procedures set forth by dealership management and manufacturer specifications. Required Experience and Education: • High School Diploma or General Educational Diploma (GED), • Knowledge of automotive repair and maintenance., • ASE certification preferred. Additional Requirements: • Valid New York State Driver License. Required Skills and Attributes: • Ability to read and comprehend instructions and information., • Working knowledge of all aspects of repairs for vehicles., • Ability to interpret vendor catalogs., • Must have knowledge of machines, tools including their designs, uses, repairs and maintenance., • Time-management and organizational abilities., • Problem-solving and critical thinking abilities., • Attention to detail. Equipment, Machines and Software Used: • Computer software: Microsoft Office to include Word, and Outlook. Physical and Mental Requirements: • Ability to sit, stand, walk, talk, hear, use hands to finger, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Will stand and move throughout the dealership facility (lot, showroom, service department, offices) for most of the shift. Will spend time outdoors showing vehicles to prospective customers and to drive vehicles in traffic during test drives Physical Exertion: • Exerts up to 50 pounds of force occasionally, and/or up to 70 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Light exertion can involve sitting, walking and/or standing most of the time. Environmental Conditions: • Work is performed in a dealership service department., • Occasional weekend and evening hours are required., • Will be exposed to noise, vibrations, dust, paint, cleaning solutions and other hazardous and non-hazardous materials. Hazards and Safety Precautions: • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Position can be based in either US or Canada. Position Qualification Summary: The Senior Data Engineer will join the Americas IT software and architecture team. This business-centric IT team enables business-focused development of cuttingedge solutions and integrates global/regional IT initiatives into the business. In this senior role, we are seeking an experienced Data Engineer with deep handson expertise in Apache Spark, Microsoft Fabric, and cloudscale data architecture. You will lead the design of robust data pipelines, optimize large-scale data architectures, and drive datadriven decisionmaking across the organization. The Senior Data Engineer is expected to work independently, collaborate with business and IT leaders, guide junior engineers, and architect solutions from the ground up based on complex business requirements. Key Responsibilities: Design and Develop Enterprise Data Pipelines: Architect, build, and maintain scalable, distributed data pipelines leveraging Apache Spark and Microsoft Fabric to process large structured and unstructured datasets. Data Integration Leadership: Integrate data from diverse internal and external systems, ensuring reliability, lineage, and consistency across the enterprise. Performance Optimization: Lead optimization of ETL/ELT workloads for large-scale analytics, improving cost efficiency, throughput, and reliability. Data Quality & Governance: Define and implement standards for data quality, metadata management, cataloging, lineage, and governance compliance. CrossFunctional Collaboration: Partner with data scientists, analysts, architects, and IT teams to define requirements, deliver insights, and integrate analytical models. Documentation: Develop and maintain indepth documentation for pipeline architectures, workflows, schemas, and operational processes. Continuous Innovation: Evaluate emerging technologies and introduce modern data engineering practices such as lakehouse patterns, delta formats, automation, and realtime processing. Troubleshooting & Reliability: Lead resolution of complex data pipeline failures, ensuring platform stability and enterprisegrade reliability. Security & Compliance: Enforce enterprise data security, privacy, and access governance policies. Qualifications: Basic: Bachelor's or Master's degree in Computer Science, Engineering, Information Systems, or related field. 7+ years of professional experience in data engineering, data architecture, or largescale data platform development. Expertise in Apache Spark for largescale batch and streaming workloads. Deep handson experience with Microsoft Fabric, including Data Engineering, Data Factory, Data Pipelines, and Lakehouse implementations. Advanced proficiency in SQL, Python, and/or Scala. Handson expertise with Microsoft Azure (preferred), AWS, or GCP cloud data services. Strong understanding of distributed systems, lakehouse patterns, and data modeling. Proven experience designing and optimizing complex ETL/ELT workflows. Strong communication skills, leadership capability, and technical mentorship experience. Preferred: Professional certifications in Azure Data Engineering, Apache Spark, or Microsoft Fabric. Experience with realtime streaming technologies such as Kafka or Azure Event Hubs. Knowledge of DevOps practices including CI/CD, Infrastructure as Code, and automated testing. Experience with visualization tools such as Power BI or Tableau. About Linde: Linde is a leading global industrial gases and engineering company with 2025 sales of $34 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit _. Salary: Pay commensurate with experience. Open to salary range $108,225 - $158,730. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-PL1 New York-TONAWANDA Full-time - IT Ongoing

Position Summary: The Application Developer (dev) will join the Americas IT software and architecture team. This business centric IT team allows for business-focused software development of new solutions as well as integrating overall global/regional IT initiatives into the business. In this role, the dev will be responsible for business unit software development activities and best practices. This includes contributing to the development of business unit or region wide software focused on affordability, reusability, sustainability, and state-of-the art design. The role will function in an agile environment, being called upon to develop, maintain, and support applications that solve challenging business problems. The Dev will collaborate with appropriate business unit/IT leaders or cross-functional teams to understand technological and business problems and deliver effective solutions. The Dev should possess the ability to integrate the appropriate solution based on a set of business requirements. Key Responsibilities: Work with business stakeholders & IT team members to develop state of the art business solutions. Learn the core business to anticipate the needs of your users before they do. Enhance, support, and maintain new and existing applications. Stay abreast of new technology developments and actively contribute ideas for new projects. Be a well-rounded, full-stack developer who knows when to use the right tools for each job. Qualifications: Basic: Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent work experience. 3-7 years of relevant work experience Excellent query and design experience in an RDBMS environment such as SQL Server or Oracle. Excellent problem-solving and analytical thinking skills. Experience with fullstack web development, including frontend technologies (JavaScript, HTML, CSS) and serverside components. Experience with Microsoft's .NET web frameworks, including ASP.NET, Web API, .NET Core/.NET 8+, MVC, and modern .NET 10 architectural patterns. Experience developing cloudnative Azure applications using Functions, App Services, and other PaaS services. Must be able to interface with internal business partners, external vendors and customers from a variety of cultures and business backgrounds utilizing excellent verbal and written communication skills. Ability to travel up to 25% (domestic and international) Ability to work independently and set aggressive personal goals. Preferred: Experience working with modern frontend frameworks such as React, Vue, Angular, or Blazor. Experience configuring and administering application hosting resources (e.g., VMs/IIS, Azure App Services, and related infrastructure). Experience with observability tools such as OpenTelemetry or Dynatrace. Experience transforming legacy code to modern cloud applications. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit _. Salary: Pay commensurate with experience. Open to salary range $88,875 - $130,350. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-PL1 New York-TONAWANDA Connecticut-Danbury, Texas-The Woodlands Full-time - IT Ongoing

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. CPEG Buffalo LLC is seeking a full time, on site IT Support Specialist. This role supports the Enterprise network infrastructure on a Cisco platform, maintaining reliable network connectivity of all satellite locations. This role will work alongside our Managed Service Provider in the design, implementation and maintenance of infrastructure data center leveraging vSphere and Horizon view. Must have working knowledge of virtualization technology, specifically VMWare and networking with Cisco products. ESSENTIAL FUNCTIONS: • High level design, implementation and maintenance of Infrastructure Data center leveraging vSphere and Horizon view;, • Establish network specifications by conferring with users; analyzing workflow, access, information and security requirements; designing router administration, including interface configuration and routing protocols., • Establish network by evaluating network performance issues including availability, utilization throughput, goodput, and latency; planning and executing the selection, installation, configuration, and testing of equipment; defining network policies and procedures, establishing connections and firewalls., • Maintain network performance by performing network monitoring and analysis, and performance tuning; troubleshooting network problems; escalating problems to vendor., • Secure network by developing network access, monitoring, control, and evaluation; maintaining documentation., • Install, upgrade and monitor software and hardware., • Support ERP Systems Analyst in Server side database configuration and management, • Support Managed Service Provider with Help Desk troubleshooting Requirements:, • Bachelor's degree in Computer Science or related field and two (2) to four (4) years of IT experience in manufacturing, engineering or related industry;, • Previous project management experience with implementation of enterprise solutions and enhancements preferred., • Experience with VMware technologies, • Knowledge of computer and/or network security systems, applications, procedures and techniques, • Ability to identify and resolve computer system malfunctions and operations problems., • Ability to communicate technical information to nontechnical personnel., • Ability to communicate clearly and effectively with staff, vendors and peers., • Strong attention to detail and solid follow-up capabilities. Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo