Trabajos electrical apprentice en Houston, TexasCrear alertas

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $66,430.00/Yr. Posted Max Pay Rate USD $180,000.00/Yr. ID 2026-19629 Category Body Technician Position Type Regular Full-Time Location : Postal Code 77048 Location : Address 4545 Sam Houston Parkway East Remote No Posted Min Pay Rate USD $66,430.00/Yr. Posted Max Pay Rate USD $180,000.00/Yr. Prioritization Tier 1 – Priority

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $30-40 per hour DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Reads blueprints, runs conduit, and wires devices., • Read and interpret mechanical and electrical drawings and code specifications for determining wiring layouts., • Performs upgrades or preventive maintenance to electrical control systems., • Runs tests, isolates problems, replaces damaged sections of wiring, and layout circuits., • Other duties as assigned. Qualifications:, • A High School Diploma is required; prefer some trade or technical school classes., • 5+ years’ work experience as an electrician apprentice., • Electrician apprenticeship., • License as a Journeyman or Electrician to meet state requirements., • Knowledge of tools, equipment, and materials common to the electrical trade., • Knowledge of applicable electrical codes, standards, and regulations., • Knowledge of electrical applications for high and low-voltage electric systems., • Skill in the installation, repair, and maintenance of all types of electrical system equipment and components., • Ability to work with minimal supervision., • Must be knowledgeable in all aspects of commercial construction industry-related products and tools. Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Journeyman, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, installer, installation, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

Location US-TX-Houston ID 2026-2122 Category Technician Position Type Full-Time Remote No Shermco Industries is seeking an Industrial Electrician. Install, commission, and maintain power, instrumentation, process controls, and, SCADA equipment • Perform routine and emergency maintenance on power, instrumentation, and control systems., • Provide technical expertise and support for troubleshooting of power and control systems., • Coordinate repair, testing, and installation of power and control systems., • Mechanical and Electrical installations., • Rigid, EMT, PVC coated rigid conduit., • Service, feeders, and branch circuits., • Controls, fiber, and network cabling., • Stainless tubing and instrumentation., • Service equipment, MCC, panelboards Minimum Qualifications to qualify for consideration, you must meet one of the following minimum qualifications and requirements:, • Master Electrician, Journeyman Electrician, or Apprentice Electrician is a plus but not a requirement., • Field experience in the industrial field with power and control systems., • Understanding of electrical schematics and controls., • Self motivated individual - able to work independently with minimal supervision., • Team oriented, flexible and willing to assist in other technical disciplines., • Hand and power tool capabilities., • Willingness to be hands-on and work in the field alongside our engineers and field technicians. Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace. NO AGENCIES PLEASE USD $30.00 - USD $45.00 /Hr.

Job DescriptionFacilities Maintenance Technician Day and Night Shift Available Direct Hire $22.50/hr Location: US-TX-Houston Responsibilities:Applicants must be legally authorized to work in the United States at the time of hire and must not require employer sponsorship now or in the future. This position is not eligible for employment visa sponsorship, and the company will not assume sponsorship obligations for existing visa holders. Why Join Us? • Career Growth: Advance your career with opportunities for leadership and personal development., • Culture of Excellence: Be part of a supportive team that values your input and encourages innovation. As a Engineer, Maintenance II you will: • Lead advanced maintenance and repair of HVAC, electrical, plumbing, and mechanical systems, ensuring maximum uptime and efficiency across facilities, • Design, implement, and oversee comprehensive preventative maintenance programs to extend equipment life, minimize unplanned downtime, and optimize resource utilization, • Serve as subject matter expert (SME) for HVAC systems, including troubleshooting complex issues, reviewing load calculations, and ensuring compliance with energy and environmental standards, • Provide technical leadership on electrical systems, including switchgear, distribution panels, backup power systems, and compliance with NFPA/NEC codes, • Develop and track maintenance KPIs (e.g., equipment reliability, MTBF, energy efficiency) and present findings to management to support data-driven decisions, • Conduct root-cause analysis of recurring equipment failures, recommend corrective actions, and implement long-term solutions, • Drive process improvement initiatives to streamline maintenance workflows, reduce costs, improve system reliability, and align practices with industry best standards, • Ensure strict compliance with safety policies, NFPA codes, OSHA requirements, and all environmental regulations during maintenance and project execution, • Associate's Degree from an accredited four-year college or university Req, • 4-6 years related experience and/or training; or equivalent combination of education and experience Required, • DL NUMBER - Driver License, Valid and in State Upon Hire Required, • State Licensed Electrician A State of Texas Apprentice Maintenance Electrician License or a City of Houston Third Grade Stationary Engineer license is preferred. Preferred, • HVAC Awareness, • Reliability Engineering Awareness-Developing Required, • Predictive Maintenance Awareness-Developing Required, • Computerized Maintenance Management Systems Computerized maintenance management system is a software package that maintains a computer database of information about an organization's maintenance operations. Awareness-Developing Required, • Preventive Maintenance Awareness-Developing Required, • Plumbing Awareness-Developing Required, • Mechanical Engineering Awareness-Developing Required, • Electrical Systems Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. Awareness-Developing Required, • 10% Minimal travel is required for this position (up to 10% of the time and on a domestic basis).

Job DescriptionDescription: Innovative Consulting & Management Services (ICMS) is a Professional & Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients. ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is with teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it’s about delivering on our commitments. ICMS is seeking a Chief Engineer (Working Supervisor) to lead and oversee the technical operations of a federal facility. This is a working supervisor role, responsible for all aspects of facility operations, maintenance, and repairs. The Chief Engineer will train and supervise journeyman and apprentice personnel, inspect and has oversight of the Preventive maintenance program and repairs, and details the Critical Equipment Condition Assessment Repairs and Reporting. Duties and Responsibilities: • As the designated supervisor, manage all O&M tasks at multiple facilities, • Inspection and oversight of PMs and mechanical repairs, • Critical Equipment Condition Assessment Repair and Reporting to Project Manager, • Manage, train, and monitor MEP personnel in the proper operation, troubleshooting, repair, and maintenance of building equipment, • Maintain currency and records for training and certifications including licensure, safety, and operational equipment training, • Manage and inspect the Preventative Maintenance Program, ensuring efficient scheduling, execution, and documentation, • Perform Critical Equipment inspections, identifying issues or trending activity and reporting conditions to management, • Provide hands-on experience in HVAC repairs, including replacing seals, refrigerant handling, correcting malfunctions, motor replacements, controls, sensors, gauges, and repairing pipe leaks, • Perform boiler repairs, including replacing seals, leak repairs, correcting operational deficiencies, motor replacements, controls, sensors, and repairing pipe leaks, • Troubleshoot and repair pumps, including leak repairs, seal and shaft replacements, motor replacements, and alignments, • Utilize, manage, and troubleshoot DDC and building automation systems (BAS) for troubleshooting, controlling and optimizing energy and water efficiency, • Conduct daily tours of facility, reporting or correcting any issues found, • Monitor properties for safety concerns, taking corrective action when necessary, • Troubleshoot all facility equipment, ensuring quick and efficient problem resolution, • Read and interpret contract specifications and drawings to ensure compliance with project requirements.Requirements:, • Minimum ten (10) years of experience in facility operations and maintenance, with verifiable expertise in troubleshooting, repair, and replacement of equipment., • At least five (5) years of recent (within the past 7 years) experience in directing operation and maintenance of equipment in a supervisory capacity, knowledge of the operation of site specific major pieces of equipment and system operation., • EPA 608 Certification required, • A/C Refrigeration Operator Certification required, • One or more of the following certifications (or equivalent experience): • N.A.P.E. Air Conditioning III – Operations and Management (National Association of Power Engineers), • Advanced Boiler Operator Certification, • International Union of Operating Engineers (IUOE) (Class 2 minimum, Class 1 preferred) stationary engineer • Demonstrated experience in operating, troubleshooting, repair and replacement of building specific equipment to include the following: • Performing required scheduled and unscheduled maintenance and repair for Multi-story, and Multi-tenant Building of 160,000 sq or greater., • Ability to operate and maintain Electrical, Mechanical, Plumbing, BAS, and HVAC systems & equipment, • A minimum of 2 years of recent (within the past 5 years) Siemens BAS systems, NCMMS, boilers, energy recovery equipment and chillers over 600 tons and other characteristics of the equipment to be operated and maintained under this Contract., • Experience operating and maintaining low pressure boilers, and chillers over 250 Tons., • Ability to operate and knowledge of fire protection and life safety systems and equipment to include Public Address systems., • Knowledge of architectural and structural systems, fixtures and equipment, • Ability to conduct Service Request Desk Operation including Maximo NCMMS or similar programs., • Maintenance of landscape irrigation systems, and computerized lighting systems, • Ability to operate and maintain egress and access systems to include: locks, keys, keycard system, vehicle barrier system, static and dynamic bollard systems, dock levelers and bumpers, roll-up and sliding garage doors., • Experience with storm drainage, and sanitary sewage equipment and systems • Strong leadership and supervisory skills; ability to train and mentor personnel, • Experience implementing preventive maintenance programs to reduce downtime and prevent equipment failures, • Proficiency in managing HVAC personnel and general maintenance workers (GMWs), ensuring high-quality work performance., • Fluent in English (spoken, written, and reading comprehension), • Must be available outside of standard working hours, including evenings, weekends, and holidays, to respond to emergencies, urgent operational needs, or other unforeseen situations as required, • Experience in government contracting is highly desired, • Ability to climb ladders, use power tools, and perform heavy physical labor as needed, • Exposure to wet, humid conditions, chemicals, fumes, and dust It is mandatory that all Contractor personnel working onsite at federal facilities meet federal government security clearance standards. Minimum investigation at a Public Trust level required. Benefits: • Medical, Dental & Vision Insurance, • Life and Accidental AD&D Insurance, • 401K Retirement plan, • 11 Paid Government Holidays Work schedules are subject to change based on client and company needs. As a management position, this person will be on call regularly and be available for and respond to emergencies off shift. *This is a contingent hire position based upon the award of contract. Citizenship requirement: U.S. Citizenship ICMS is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, color, religion, age, sex, national origin, disability or veteran status, genetics, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #ZR

Job Description Electrical Technician Job Type: Full Time, On-Site Who We Are: Southern Integrated Solutions and Consulting is a forward-thinking systems integration company offering an extensive range of services, products, and customized systems in sectors such as oil & gas, utilities, manufacturing, and mining. Our team composed of seasoned Electrical and Control Systems Engineers, Consultants, Project Managers, System Integrators, and I&E Technicians excel in Automation, SCADA, I&E Construction, Process Control, Safety Instrumented System Design, Safety Integrity Level Selection & Verification, Safety Lifecycle Modeling, Real-Time Data Collection, MCC & Switchgear Design, and Fabrication. Job Description: Southern Integrated Solutions and Consulting (SISC) is searching for an Electrical Technician. The ideal candidate for this position has a minimum of 3-5 years' electrical experience. The candidate under the general direction of the Companies Project Managers, Superintendents, and Foreman’s will perform electrical, communications and electronic activities. The Electrical Technician plays a key role in executing ongoing facilities maintenance and capital improvement projects. The Electrical Technician performs and directs the apprentices assigned to them in the daily job duties and tasks and performs other project related duties as required. The Electrical Technician position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. If you are a motivated individual who is passionate about technology and enjoys working in a collaborative and fast-paced environment, we encourage you to apply. Responsibilities: • Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis, • Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided, • Fulfill daily commitments and stay on project schedule as directed by job-site foreman, • Report project specific information to the assigned superintendent or Foreman on scheduled basis, • Ensure the occupational health and safety of assigned employees in accordance with state and federal regulations, departmental and District policies, and industry standards and practices, • Inspects work in progress to assure compliance with applicable codes and standards, project specifications, and quality assurance procedures, • Keep job site clean before leaving and be kept clutter free during the work, • Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits, • Measures, cuts, bends, threads, assemble, and installs electrical conduit, • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels, • Connects power cables to equipment, such as electric range or motor, and installs grounding leads, • Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement Education & Experience: • High School Graduate or G.E.D, • 3-5 years' experience in industrial electrical industry, • Experience with using hand-tools and power tools., • Skill or experience reading and interpreting diagrams such as technical drawings or blueprints., • Strong communication, problem solving, and critical thinking skills., • High efficiency and time management skills., • Competitive salary with performance-based bonuses., • Comprehensive health, dental, and vision insurance with employer contributions., • Paid short-term and long-term disability, and life insurance benefits., • Voluntary benefits., • Retirement savings plan with company match. WTggeJBTnF

Job DescriptionSalary: Are you looking to progress in your career in a growing industry? Wanting a competitive hourly pay rate and career development program including training that allows you to grow your skills and pay? Join HTX Material Handling: We are a Material Handling Equipment distributor representing premium brands in the Houston market. Our company was started in 2019 and the brands we represent are global leaders. Its the perfect time to join this growing organization as we establish our presence in Texas! JOB DESCRIPTION AND PURPOSE: The Shop Service Technician will be responsible for performing planned maintenance, breakdown repairs, and troubleshooting on various models of Linde, Baoli and competitive brands of forklifts and material handling equipment. A background or experience in maintaining Lift Trucks / Forklifts is REQUIRED. JOB DUTIES/RESPONSIBILITIESmay include, but are not limited to: • Read and understand electrical and hydraulic system schematics, • Repair or replace major system components, including electrical, hydraulic, mechanical, LPG systems, power steering, transmissions, and engines with limited supervision, • Properly identify and order all necessary replacement parts, • Troubleshoot and diagnose most truck components, • Perform engine tune-ups on most makes of equipment without supervision, • Perform proper PMs in a timely manner, • Troubleshoot and diagnose most complex electrical systems on internal combustion (IC) and electric trucks, • Be able to use all special tools properly, and maintain and properly use the normal tools of the trade, • Assist with training/mentoring apprentice mechanics through on-the-job training, • Follow all safety procedures in performing work as well as company policies, and at customers sites, • Demonstrate exceptional customer service skills, properly and respectfully representing the company at all times while on the job, • Work across the entire HTX Material Handling footprint to do the right thing for all customers, • Perform other duties as required or assigned by management REQUIRED QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma / G.E.D / Other Technical training., • Minimum of 2-5 years of experience in repair and maintenance on industrial equipment and/or machines, • Valid Drivers License (possess and maintain during employment), good driving record, • Demonstrated ability to repair equipment per skill level, • Basic Computer knowledge including use of Personal Computers, Tablets, and Microsoft Office (Word, Excel, Outlook and PowerPoint), • Must be fluent in English. Understanding of Spanish will be considered a plus WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may very probably be exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, and outside weather conditions. The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually medium to loud. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you are unable to complete the application without an accommodation. HTX Material Handling offers100% paid Health Insurance (Health, Dental, Vision), Life Insurance and paid holidays. All our techs are issued Apple iPads and touch screen Laptops to perform their duties. We also provide Industry leading Manufacturer Training towards certification, Tools Insurance, 40 hour work week + Overtime, Uniforms, Safety boots allowance, Cell Phone allowance , Specialty tools and Career Advancement opportunities and unique work environment.

Job Description Job Overview As our workload continues to expand, we are seeking Experienced Licensed Electrical Apprentices to work on commercial electrical projects in the Houston and surrounding areas. As an Apprentice Electrician, you will work under the supervision of experienced electricians, gaining hands-on experience in various electrical tasks and projects. You will be working in a commercial environment and learning essential skills that will contribute to your professional development. We are consistently growing, and as such we have ongoing needs for experienced commercial electrical apprentices to grow with our company. We offer competitive hourly pay ranging from $18- $29 per hour (based on experience). We are IEC members and offer training through the IEC. Licensed Electrical Apprentice Responsibilities • Assist in the installation, maintenance, and repair of electrical systems and equipment., • Utilize hand tools and power tools safely and effectively on construction sites., • Read and interpret schematics and blueprints to understand project requirements., • Conduct tests using an ohmmeter and other diagnostic tools to troubleshoot electrical issues., • Work with low voltage systems as directed by senior electricians., • Follow safety protocols and maintain a clean work environment at all times., • Collaborate with team members to complete projects efficiently and accurately. Licensed Electrical Apprentice Requirements • A TDLR Apprentice license is required., • Travel to the Houston Metro and surrounding., • 2 years previous commercial electrical experience is required., • Familiarity with hand tools, power tools, and basic electrical concepts., • Ability to read blueprints and schematics is desirable., • A strong willingness to learn from experienced professionals in the field of electrical work., • Must be able to work effectively on construction sites, adhering to safety standards. This is an excellent opportunity for individuals eager to learn and grow within the electrical trade while contributing positively to our team. If you're ready to take your career to the next level, we invite you to apply with Jomar Electrical Contractors today. Company DescriptionJomar Electrical Contractors is a prominent player in the Texas construction industry, boasting over 30 years of experience in commercial electrical systems. Our commitment to quality, safety and innovation has established us as a trusted partner for various construction projects.Jomar Electrical Contractors is a prominent player in the Texas construction industry, boasting over\r\n30 years of experience in commercial electrical systems. Our commitment to quality, safety and\r\ninnovation has established us as a trusted partner for various construction projects.

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job Description Journeyman Electrician Position Summary We are seeking an experienced Journeyman Electrician to join our panel shop team. The ideal candidate will have extensive experience building, wiring, and troubleshooting industrial control panels, switchgear, and PLC-based systems. This role requires strong technical knowledge, the ability to interpret complex electrical drawings, and a commitment to quality, safety, and production efficiency. Key Responsibilities Read and interpret electrical schematics, one-lines, wiring diagrams, and panel layout drawings. Build, wire, and assemble industrial control panels, MCCs, PLC panels, and switchgear assemblies. Install and terminate wiring for PLCs, HMIs, VFDs, relays, breakers, motor starters, and control devices. Perform point-to-point wiring and ensure accurate labeling and documentation. Lay out panel components in accordance with drawings and UL requirements (if applicable). Conduct quality checks, continuity testing, and assist with power-up and functional testing. Troubleshoot wiring issues and make necessary corrections efficiently. Ensure compliance with NEC, UL 508A (if applicable), and company standards. Mentor and assist apprentice and junior wiremen as needed. Maintain a safe and organized work environment in accordance with company safety policies. Qualifications Valid Journeyman Electrician license (required). 5+ years of electrical experience, with strong panel shop experience preferred. Proven experience with industrial control panels and PLC systems. Strong understanding of electrical theory and control circuits. Experience with switchgear and low- to medium-voltage systems preferred. Ability to read and interpret complex electrical schematics and blueprints. Familiarity with UL panel standards and quality control processes. Strong troubleshooting and problem-solving skills. Ability to work independently with minimal supervision. Work Environment Indoor panel shop environment. Overtime may be required to meet production schedules.

Job DescriptionJob Title: Journeyman Electrician (State Licensed) Location: Houston, TX 77015 Pay Rate: $30+ per hour DOE Schedule: Monday through Friday, 7:00 AM – 4:00 PM, with overtime available Requirements: Journeyman Electrician State License (Apprentice License not valid) Position Overview: Integrity Trade Services is seeking a skilled and reliable Journeyman Electrician to join our team on the east side of Houston. This is a contract-to-hire opportunity offering competitive pay, consistent work, and room for career growth. If you hold an active Texas Department of Licensing and Regulation (TDLR) Journeyman license and are ready for your next challenge, we want to hear from you! Key Responsibilities: • Install, maintain, test, troubleshoot, and repair industrial electrical systems and electronic controls, • Perform preventative maintenance on facility equipment to ensure optimal operation, • Diagnose and repair electrical issues accurately and efficiently, • Maintain detailed records of work performed in compliance with safety and regulatory standards, • Collaborate with the maintenance team to ensure seamless facility operations, • Follow blueprints, wiring diagrams, and technical instructions effectively, • Perform additional duties as assigned by management to support overall project successQualifications & Skills:, • Valid and active TDLR State Journeyman Electrician license required, • Proven experience in industrial electrical systems, including wiring, troubleshooting, and controls, • Strong knowledge of PLC and electronic controls systems, • Ability to read schematics, technical documents, and blueprints, • Excellent problem-solving skills and attention to detail, • Effective communication skills, both written and verbal, • Reliable transportation and the ability to work flexible shifts when needed Interested? Applicants must apply before reaching out. Questions may be directed via text only to Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer We celebrate diversity and are committed to creating an inclusive environment for all applicants, including protected veterans and individuals with disabilities. About Us: Integrity Trade Services’ core philosophy is "Staffing you can trust." We are dedicated to safety, honesty, fairness, and integrity, providing reliable job opportunities that get you to work quickly, safely, and fairly compensated. #HIGH1 #ZR

Job Description IRA Compliance Administrator Saber Power Services, a portfolio company of Greenbelt Capital Partners, is a fully integrated electrical power system services firm providing end-to-end solutions across utility, renewables and battery storage, industrial, petrochemical, and other markets. Based in Houston, Texas, Saber Power offers deep subject matter expertise and uses an engineering-led approach to designing, installing, testing, and maintaining medium and high-voltage electrical infrastructure. Saber serves clients locally, nationally, and abroad. Saber Power Services seeks a Compliance Administrator to support the Company’s IRA (Inflation Reduction Act) recordkeeping and reporting. This role will be based in our Houston office located on Space Center near Ellington Field. JOB SUMMARY: The IRA (Inflation Reduction Act) Compliance Administrator is responsible for ensuring accurate and timely entry of data related to the Inflation Reduction Act’s recordkeeping and reporting requirements. This role involves managing large volumes of information regarding prevailing wages, registered apprenticeships, and compliance with federal regulations. This role requires frequent interfacing with the Owner or Owner’s Third-Party consultants to ensure mutual agreement on reporting and recordkeeping requirements. The ideal candidate will have strong attention to detail, proficiency in data management software, and experience in a compliance-driven environment. Duties and Responsibilities: · Routinely interface with Owner Third-Party consultants to address and resolve concerns. · Elevate issues as needed to ensure appropriate executive oversight of issues that appear to be contrary to the requirements of the IRA compliance guidelines. · Accurately enter and update project-related data including labor hours, wage rates, and apprentice information into compliance tracking systems. · Maintain detailed records of subcontractor and contractor compliance with IRA reporting and recordkeeping requirements. · Ensure that all data entries meet the requirements outlined in the IRA Final Regulations. · Accurately enter supporting documents, including certified payroll records, fringe benefit statements, and apprentice certificates. · Systematically enter wage determinations and maintain confidentiality and security of sensitive personally identifiable information (SPII) and personally identifiable information (PII). · Submit accurate compliance reports as required by the IRA, ensuring all documentation aligns with government mandates. · Coordinate with the Compliance Team to ensure timely submissions of all required documentation. · Other duties as assigned Qualifications: · High School Diploma, or equivalent · Minimum of 2 years of experience in an administrative support role. · Prior experience with IRA Compliance is preferred. · Working knowledge of Microsoft applications, including strong Excel skills. · Ability to meet tight deadlines and manage multiple projects simultaneously. · Strong organizational and problem-solving skills. · Excellent communication skills, both written and verbal. · Strong attention to detail and accuracy in data entry. · Ability to manage sensitive information with confidentiality and discretion. Safety is a Core Value with our organization. We work SAFELY or not at all. Benefits: Saber has an excellent benefits package including medical, dental, vision, long-term disability, short term disability, life insurance, 401K with Matching, flexible benefit account; and an outstanding work environment. Check out our Total Rewards Plan here. Saber Power Services is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Company DescriptionSaber Power Services, LLC, (SPS) located in Houston, TX is a nationally recognized full service, EPC, specialty engineering, procurement, construction and testing and commissioning company specializing in complex medium and high voltage electrical infrastructure in North America.Saber Power Services, LLC, (SPS) located in Houston, TX is a nationally recognized full service, EPC, specialty engineering, procurement, construction and testing and commissioning company specializing in complex medium and high voltage electrical infrastructure in North America.

Job DescriptionSalary: Are you looking to progress in your career in a growing industry? Wanting a competitive hourly pay rate and career development program including training that allows you to grow your skills and pay? Join HTX Material Handling: We are a Material Handling Equipment distributor representing premium brands in the Houston market. Our company was started in 2019 and the brands we represent are global leaders. Its the perfect time to join this growing organization as we establish our presence in Texas! JOB DESCRIPTION AND PURPOSE: The Service Technician will be responsible for performing planned maintenance, breakdown repairs, and troubleshooting on various models of Linde, Baoli and competitive brands of forklifts and material handling equipment.A background or experience in maintaining Lift Trucks / Forklifts isREQUIRED. JOB DUTIES/RESPONSIBILITIESmay include, but are not limited to: • Read and understand electrical and hydraulic system schematics, • Repair or replace major system components, including electrical, hydraulic, mechanical, LPG systems, power steering, transmissions, and engines with limited supervision, • Properly identify and order all necessary replacement parts, • Troubleshoot and diagnose most truck components, • Perform engine tune-ups on most makes of equipment without supervision, • Perform proper PMs in a timely manner, • Troubleshoot and diagnose most complex electrical systems on internal combustion (IC) and electric trucks, • Be able to use all special tools properly, and maintain and properly use the normal tools of the trade, • Operate service van in a clean, safe and secure manner following all required safety rules for the job, • Assist with training/mentoring apprentice mechanics through on-the-job training, • Follow all safety procedures in performing work as well as company policies, and at customers sites, • Demonstrate exceptional customer service skills, properly and respectfully representing the company at all times while on the job, • Work across the entire HTX Material Handling footprint to do the right thing for all customers, • Perform other duties as required or assigned by management, • Ability to troubleshoot and diagnose complex electrical systems, • Proficient in repairing and maintaining industrial equipment, • Experience with electrical and hydraulic system schematics REQUIRED QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma / G.E.D / Other Technical training., • Minimum of 2-5 years of experience in repair and maintenance on industrial equipment and/or machines, • Valid Drivers License (possess and maintain during employment), good driving record, • Demonstrated ability to repair equipment per skill level, • Basic Computer knowledge including use of Personal Computers, Tablets, and Microsoft Office (Word, Excel, Outlook and PowerPoint), • Must be fluent in English. Understanding of Spanish will be considered a plus WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may very probably be exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, and outside weather conditions. The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually medium to loud. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you are unable to complete the application without an accommodation. HTX Material Handling offers100% paid Health Insurance (Health, Dental, Vision), Life Insurance and paid holidays. All our techs are issued Apple iPads and touch screen Laptops to perform their duties. We also provide Industry leading Manufacturer Training towards certification, Company Vehicle for Techs, Tools Insurance, 40 hour work week + Overtime, Uniforms, Safety boots allowance, Cell Phone allowance , Specialty tools and Career Advancement opportunities and unique work environment. #ZR

Job Description Apprentice Electrician- $16-$30/hr - DOE We are currently hiring Apprentice Electricians with experience performing electrical installations in a commercial environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Houston Area. Please apply today by calling/texting Chloe at 713-574-1832 or emailing your resume to or apply directly to this posting by clicking “Apply” below. Apprentice Electrician Duties: · Cutting, bending, threading and running electrical conduit materials · Pulling electrical wiring through electrical conduit · Terminating electrical panels, set fixtures, outlets, and various electrical devices · Installing and connecting wires to circuit breakers, transformers, outlets, or other components and systems Apprentice Electrician Qualifications: · Current State Electrical License · Recent experience performing electrical installations in a commercial setting · Familiar with the most updated NEC codes · Your own tools and PPE (safety gear) · Experience reading and interpreting blueprints Compensation: · Competitive starting pay $16 -$30/hr or depending on experience · Get paid weekly! · Option to enroll in Medical, Dental, Vision, and Life Insurance · Referral Bonuses of up to $250 for referrals that result in a placement – simply click “REFER” below to share with a friend! Company DescriptionOutsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job Description Walker Engineering is actively hiring experienced Apprentice Electricians (E3–E5) for commercial projects across the Houston area. If you have a solid foundation in the trade and are ready to take the next step in your career, we want to hear from you. Why Join Walker Engineering? • Work alongside top-tier Journeymen and Master Electricians, • Be part of high-impact commercial projects throughout Houston, • Competitive pay, a strong safety culture, and clear career advancement paths Position Overview: As an E3+ Apprentice Electrician, you’ll be expected to perform a variety of installation, maintenance, and repair tasks on commercial job sites. You’ll bring a solid understanding of electrical systems and play a key role in keeping projects on track. Key Responsibilities: Responsibilities vary based on E-Level and experience • Assist with the layout and installation of electrical systems, • Pull wire, bend conduit, and install fixtures, • Maintain a clean and safe job site, • Operate hand tools and power tools under supervision, • Support less experienced apprentices when needed, • Follow all site safety procedures—no work on energized circuits, • Active TDLR Electrical Apprentice Card, • E3 Level or higher, • At least 3 years of commercial electrical experience, • Basic hand tools of the trade, • Valid Driver’s License or State ID, • High school diploma, GED, or equivalent preferred Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Company DescriptionWalker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio. We have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio.\r\n\r\nWe have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

HVAC Journeyman Technician - Central Campus PRIMARY FUNCTION: Maintain and repair HVAC systems and equipment to provide a safe and comfortable environment for students, faculty and staff. Perform preventative maintenance on equipment to ensure optimum efficiency and extend equipment life. Perform HVAC installation, repair and maintenance as needed. Perform preventive maintenance work as required and, in the priority, directed. Support and adhere to the College Safety Program. Maintain quality standards as set by the District. Check and test control circuits; check and test pneumatic control systems; diagnose HVAC problems and remove, repair and replace faulty parts. Be available for emergency after-hour work or to complete on-going projects, and be willing to respond to calls any time during a 24-hour period Essential Job Functions: • Assure that you have complete knowledge of appropriate procedures and take measures to assure safe outcomes for all tasks undertaken., • Complete assigned preventative maintenance and repair work orders., • Perform equipment inspections to determine condition or potential problems., • Update material inventory for HVAC Department, • Trouble shoot water circulating pumps, cooling towers, air handlers, walk in coolers, walk in freezers, fan coil units, exhaust fans, split systems and roof top units., • Assist supervisor with water treatment systems., • Investigate all water leak issues within the buildings to determine the source., • Assist Plumbing and Electrical Departments when the need arises, • Other duties as assigned, • Carry college cell phone and on call 24/7 Knowledge, Skills and Abilities: • Knowledge in maintenance, troubleshooting and repair of HVAC equipment including large centrifugal chillers, boilers, pumps and air handling units., • Ability to review and close out work orders in computerized work order system., • Knowledge in chemical water treatment systems for HVAC applications., • Ability to diagnose and repair pneumatic and DDC control systems., • Ability to read and interpret mechanical plans., • Must have completed a recognized apprentice program; OR have at least five (5) years' experience directly related to the craft with no less than three (3) years at the apprentice level., • Must be able to read and interpret electro-mechanical plans, specifications, and operational criteria and possess quality understanding of the HVA systems installed throughout the District., • Must have a valid Texas Driver's License with a good driving record., • Preferred candidate should have at least five (5) years' experience in hot water and chilled water systems of 100+ tons capacity with two (2) years' experience in/or with related trades such as plumbing and electrical. Required Licenses/Certifications:, • State class "A" A/C license Salary Grade: 110 Salary is based on the Board-approved salary schedule for the current fiscal year. ___ Requisition Number: req6187 Posting Close Date: 4/10/2026 Apply NowShare Save Job

HVAC Journeyman - North Campus PRIMARY FUNCTION: Maintain and repair HVAC systems and equipment to provide a safe and comfortable environment for students, faculty and staff. Perform preventative maintenance on equipment to ensure optimum efficiency and extend equipment life. Perform HVAC installation, repair and maintenance as needed.Perform preventive maintenance work as required and, in the priority, directed. Support and adhere to the College Safety Program. Maintain quality standards as set by the District. Check and test control circuits; check and test pneumatic control systems; diagnose HVAC problems and remove, repair and replace faulty parts. Be available for emergency after-hour work or to complete on-going projects, and be willing to respond to calls any time during a 24-hour period. Essential Job Functions: • Assure that you have complete knowledge of appropriate procedures and take measures to assure safe outcomes for all tasks undertaken., • Complete assigned preventative maintenance and repair work orders., • Perform equipment inspections to determine condition or potential problems., • Update material inventory for HVAC Department., • Trouble shoot water circulating pumps, cooling towers, air handlers, walk in coolers, walk in freezers, fan coil units, exhaust fans, split systems and roof top units., • Assist supervisor with water treatment systems., • Investigate all water leak issues within the buildings to determine the source., • Assist Plumbing and Electrical Departments when the need arises., • Other duties as assigned., • Carry college cell phone and on call 24/7. Knowledge, Skills and Abilities: • Knowledge in maintenance, troubleshooting and repair of HVAC equipment including large centrifugal chillers, boilers, pumps and air handling units., • Ability to review and close out work orders in computerized work order system., • Knowledge in chemical water treatment systems for HVAC applications., • Ability to diagnose and repair pneumatic and DDC control systems., • Ability to read and interpret mechanical plans., • Must have completed a recognized apprentice program; OR have at least five (5) years' experience directly related to the craft with no less than three (3) years at the apprentice level., • Must be able to read and interpret electro-mechanical plans, specifications, and operational criteria and possess quality understanding of the HVA systems installed throughout the District., • Must have a valid Texas Driver's License with a good driving record., • State class "A" A/C license. Salary Grade: 110 Salary is based on the Board-approved salary schedule for the current fiscal year. ___ Requisition Number: req6189 Posting Close Date: 4/10/2026 at 6 pm CST Apply NowShare Save Job

Applicants must be legally authorized to work in the United States at the time of hire and must not require employer sponsorship now or in the future. This position is not eligible for employment visa sponsorship, and the company will not assume sponsorship obligations for existing visa holders. Living Our Values All associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live. Why Join Us? • Career Growth: Advance your career with opportunities for leadership and personal development., • Culture of Excellence: Be part of a supportive team that values your input and encourages innovation., • Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs. Total Rewards Our Total Rewards package underscores our commitment to recognizing your contributions. We offer a competitive and fair compensation structure that includes base pay and performance-based rewards. Compensation is based on skill set, experience, qualifications, and job-related requirements. Our comprehensive benefits package includes medical, dental, and vision insurance, wellness programs, retirement plans, and generous paid leave. Discover more about what we offer by visiting our___page. A Day In The Life The Associate, Maintenance Engineer II under the direction of the Lead Engineer supports the Vehicle Processing Center (VPC) and affiliated facilities by maintaining HVAC, electrical, plumbing, and building systems while assisting with preventative maintenance programs. This role ensures compliance with safety and NFPA standards, uses proper PPE, and interprets technical manuals and drawings. Strong communication and problem-solving skills are essential to identify issues, implement corrective actions, and maintain safe, efficient operations. As a Engineer, Maintenance II you will: • Lead advanced maintenance and repair of HVAC, electrical, plumbing, and mechanical systems, ensuring maximum uptime and efficiency across facilities, • Design, implement, and oversee comprehensive preventative maintenance programs to extend equipment life, minimize unplanned downtime, and optimize resource utilization, • Serve as subject matter expert (SME) for HVAC systems, including troubleshooting complex issues, reviewing load calculations, and ensuring compliance with energy and environmental standards, • Provide technical leadership on electrical systems, including switchgear, distribution panels, backup power systems, and compliance with NFPA/NEC codes, • Develop and track maintenance KPIs (e.g., equipment reliability, MTBF, energy efficiency) and present findings to management to support data-driven decisions, • Conduct root-cause analysis of recurring equipment failures, recommend corrective actions, and implement long-term solutions, • Drive process improvement initiatives to streamline maintenance workflows, reduce costs, improve system reliability, and align practices with industry best standards, • Ensure strict compliance with safety policies, NFPA codes, OSHA requirements, and all environmental regulations during maintenance and project execution, • Mentor and provide technical guidance to junior engineers and maintenance staff, building cross-functional expertise and operational depth What We Need From You • Associate's Degree from an accredited four-year college or university Req, • 4-6 years related experience and/or training; or equivalent combination of education and experience Required, • Ability to apply common sense., • DL NUMBER - Driver License, Valid and in State Upon Hire Required, • State Licensed Electrician A State of Texas Apprentice Maintenance Electrician License or a City of Houston Third Grade Stationary Engineer license is preferred. Preferred, • HVAC Awareness-Developing Required, • Reliability Engineering Awareness-Developing Required, • Predictive Maintenance Awareness-Developing Required, • Computerized Maintenance Management Systems Computerized maintenance management system is a software package that maintains a computer database of information about an organization's maintenance operations. Awareness-Developing Required, • Preventive Maintenance Awareness-Developing Required, • Plumbing Awareness-Developing Required, • Mechanical Engineering Awareness-Developing Required, • Electrical Systems Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. Awareness-Developing Required, • Equipment Repair Awareness-Developing Required Physical Requirements The physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly and repeatedly required to talk; hear; stand; walk; stoop; kneel/squat, climb, use hands and fingers, to handle, grip/squeeze and/or feel; push/pull and reach with hands and arms. The associate will be frequently required to balance; crouch, or crawl; reach over-head and taste or smell. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, night vision, and ability to adjust focus. Travel Requirements • 10% Minimal travel is required for this position (up to 10% of the time and on a domestic basis). Join Us The Friedkin Group and its affiliates are committed to ensuring equal employment opportunities, including providing reasonable accommodations to individuals with disabilities. If you have a disability and would like to request an accommodation, please contact us at___. We celebrate diversity and are committed to creating an inclusive environment for all associates. We are seeking candidates legally authorized to work in the United States, without Sponsorship.

Applicants must be legally authorized to work in the United States at the time of hire and must not require employer sponsorship now or in the future. This position is not eligible for employment visa sponsorship, and the company will not assume sponsorship obligations for existing visa holders. Living Our Values All associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live. Why Join Us? • Career Growth: Advance your career with opportunities for leadership and personal development., • Culture of Excellence: Be part of a supportive team that values your input and encourages innovation., • Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs. Total Rewards Our Total Rewards package underscores our commitment to recognizing your contributions. We offer a competitive and fair compensation structure that includes base pay and performance-based rewards. Compensation is based on skill set, experience, qualifications, and job-related requirements. Our comprehensive benefits package includes medical, dental, and vision insurance, wellness programs, retirement plans, and generous paid leave. Discover more about what we offer by visiting our___page. A Day In The Life The Associate, Maintenance Engineer II under the direction of the Lead Engineer supports the Vehicle Processing Center (VPC) and affiliated facilities by maintaining HVAC, electrical, plumbing, and building systems while assisting with preventative maintenance programs. This role ensures compliance with safety and NFPA standards, uses proper PPE, and interprets technical manuals and drawings. Strong communication and problem-solving skills are essential to identify issues, implement corrective actions, and maintain safe, efficient operations. As a Engineer, Maintenance II you will: • Lead advanced maintenance and repair of HVAC, electrical, plumbing, and mechanical systems, ensuring maximum uptime and efficiency across facilities, • Design, implement, and oversee comprehensive preventative maintenance programs to extend equipment life, minimize unplanned downtime, and optimize resource utilization, • Serve as subject matter expert (SME) for HVAC systems, including troubleshooting complex issues, reviewing load calculations, and ensuring compliance with energy and environmental standards, • Provide technical leadership on electrical systems, including switchgear, distribution panels, backup power systems, and compliance with NFPA/NEC codes, • Develop and track maintenance KPIs (e.g., equipment reliability, MTBF, energy efficiency) and present findings to management to support data-driven decisions, • Conduct root-cause analysis of recurring equipment failures, recommend corrective actions, and implement long-term solutions, • Drive process improvement initiatives to streamline maintenance workflows, reduce costs, improve system reliability, and align practices with industry best standards, • Ensure strict compliance with safety policies, NFPA codes, OSHA requirements, and all environmental regulations during maintenance and project execution, • Mentor and provide technical guidance to junior engineers and maintenance staff, building cross-functional expertise and operational depth What We Need From You • Associate's Degree from an accredited four-year college or university Req, • 4-6 years related experience and/or training; or equivalent combination of education and experience Required, • Ability to apply common sense., • DL NUMBER - Driver License, Valid and in State Upon Hire Required, • State Licensed Electrician A State of Texas Apprentice Maintenance Electrician License or a City of Houston Third Grade Stationary Engineer license is preferred. Preferred, • HVAC Awareness-Developing Required, • Reliability Engineering Awareness-Developing Required, • Predictive Maintenance Awareness-Developing Required, • Computerized Maintenance Management Systems Computerized maintenance management system is a software package that maintains a computer database of information about an organization's maintenance operations. Awareness-Developing Required, • Preventive Maintenance Awareness-Developing Required, • Plumbing Awareness-Developing Required, • Mechanical Engineering Awareness-Developing Required, • Electrical Systems Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. Awareness-Developing Required, • Equipment Repair Awareness-Developing Required Physical Requirements The physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly and repeatedly required to talk; hear; stand; walk; stoop; kneel/squat, climb, use hands and fingers, to handle, grip/squeeze and/or feel; push/pull and reach with hands and arms. The associate will be frequently required to balance; crouch, or crawl; reach over-head and taste or smell. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, night vision, and ability to adjust focus. Travel Requirements • 10% Minimal travel is required for this position (up to 10% of the time and on a domestic basis). Join Us The Friedkin Group and its affiliates are committed to ensuring equal employment opportunities, including providing reasonable accommodations to individuals with disabilities. If you have a disability and would like to request an accommodation, please contact us at___. We celebrate diversity and are committed to creating an inclusive environment for all associates. We are seeking candidates legally authorized to work in the United States, without Sponsorship.

Apprentice Electrician (HOUSTON).Facility Solutions Group is dedicated to timeless contribution and service in lighting, electrical, energy, and technology fields.Our mission is to consistently provide our customers with superior value through quality products, service and support by contributing to

Job Description Talent Corps is now hiring Commercial Journeyman & Apprentice Electricians for varying projects throughout the Houston area. Essential Job Duties: • Removing, installing, maintenance, and repairing electrical equipment, wires, and fixtures., • Install various types of raceway and cable tray systems., • Troubleshoot motor and control systems., • Adhere to all quality and safety codes, maintain a safe working environment., • Will be working with ladders, booms, and elevated platforms. Requirements: (The must haves) Journeymen Electricians: • 3-5 Years of experience in the commercial electrical field working as a Journeyman, • Must have Valid TDLR as a Journeyman, • Must have OSHA 10 or be billing to get, • Must have reliable transportation., • 3 -5 years of experience in the commercial electrical field, • Must have Valid TDLR as an Apprentice, • Must have OSHA certification, • Must have reliable transportation., • Must have all apprentice tools of the trade., • Must be reliable and show up to work. Physical demands: The physical demands of the job include standing for long periods of time, bending, sitting, and lifting. The Location: Varies per position, we have clients throughout the Houston area.

Job Description We are currently in need of a experienced and skilled Apprentice Electrician to join our team. We are looking for a long term employee who will grow with Right Touch Electrical. We pay our apprentice electricians $12-18 per hour depending on your experience in the field. You must meet the following qualifications to apply: • 1-2 years commercial experience, • Apprentice/Drivers License, • Works well with others, • Great communication/etiquette and customer service skills, • Maintain clean cut appearance at all times, • Great time management skills, • Able to work overtime hours, • Willing to work some Saturdays (No Sundays), • Good character and integrity, • Able to pass drug test and background checks

Responsible for the installation of electrical systems in the commercial and industrial construction markets at job sites and project locations.Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis.Responsible for promoting excellent

You will complete residential installations sold by our electrical service technicians while providing 5 star service. You will have the assistance of an electrical apprentice as needed for projects. Valid electrical license with TDLR (residential wireman or higher).

Job Description Proman Skilled Trades is currently seeking to hire Journeyman & Apprentice Electricians to join our team! You will be working on Commercial construction projects in the Houston, Texas area. Responsibilities: Run and bend conduit Run MC cable Install junction boxes, panels, switches, plugs and fixtures Adhere to all quality and safety codes Qualifications: At least 3 + years of Commercial experience in the Electrical field Familiarity with electrical schematics, blueprints, and manuals Familiarity with electrical equipment and hand tools Must be able to handle a physical work load Must have own tools and reliable transportation Strong problem solving and critical thinking skills *Pay is based on experience Company Description•\tFriendly, Knowledgeable Staff -\tDirect Deposit Programs -\tMedical, Dental, Vision Benefit Programs -\tShort-Term Disability & Life Insurance Programs -\tReferral Bonus -\tWeekly Pay•\tFriendly, Knowledgeable Staff\r\n•\tDirect Deposit Programs\r\n•\tMedical, Dental, Vision Benefit Programs\r\n•\tShort-Term Disability & Life Insurance Programs\r\n•\tReferral Bonus\r\n•\tWeekly Pay

As an Apprentice Electrician you will work under the guidance of a Journeyman level electrician assisting in the installation, alteration, addition, and/or repair of electrical systems on commercial work sites. An apprentice electrician will not work on energized circuits or equipment. MUST have Cur

Description A Substation Electrician is responsible for the installation, maintenance, and repair of electrical equipment and systems within electrical substations. They ensure the safe and efficient operation of power distribution systems by monitoring equipment, making necessary repairs, and maintaining key components like circuit breakers, transformers, and voltage regulators. * Work on energized conductors up to 500 volts * Install miscellaneous hardware, grounds, fittings during construction, buss supports, and conductors on dead circuits * Test electrical equipment and systems, identify malfunctions, and troubleshoot complex electrical problems. * Perform transmission and distribution switching * Rig, tie knots and splice rope * Assist qualified mechanic in simple routine inspection and maintenance * Assist in the installation of all types of conduit systems * Assist in the handling, moving and installation of all transmission, distribution and plant equipment, machinery, etc. * Filtering oil and minor repairs to transformers, oil circuit breakers, regulators * Prepare reports and records * Operate Company's vehicles and equipment * Execute and complete all other duties assigned by supervisors Qualifications * 7 years of experience working as a substation electrician * Completion of an apprentice electrician's program or certificate of Journeyman Electrician status, OR, verified certificate of Journeyman Electrician status and a minimum of four years' experience performing journey-level high voltage (4kV and above) substation electrician duties * Ability and willingness to travel to various Company locations and job sites. * Must be able to assess through Burns and McDonnell assessment program This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Craft Primary Location US-TX-Houston Schedule: Full-time Travel: Yes, 50 % of the Time Req ID: 253058 Job Hire Type Experienced #LI-DNI #CSP N/A

Job Description Job Description Don’t get struck by a lightning bolt; start an exciting and rewarding career in lightning protection! Bonded Lightning Protection Systems has an immediate opening for an Entry Level Installation Apprentice. This entry level role will be the beginning of your apprenticeship training to become a lightning protection field installation technician with the largest lightning protection contractor in the United States. Established in 1950, we are a second-generation, family-owned company dedicated to providing protection and peace of mind! This is the perfect opportunity to launch your career! We’ll provide you with hands-on training plus competitive compensation and great benefits. Apply Today! Job Responsibilities This apprenticeship program is designed to allow you to develop the skills and knowledge for a stable career in a construction related field. As an Entry Level Installation Apprentice you will learn nationally recognized standards governing the lightning protection industry while receiving hands on installation training in the field. Training includes • Basic training in reading blueprints and installation drawings, • Learning how to install trenched in grounding systems To qualify for this position, you must feel comfortable working on ladders, lifts, high rise and pitched roofs. You must also be willing to learn and follow mandatory safety requirements for our installation processes. • Pass a criminal background check & drug screen, • Valid Driver’s license and clear MVR, • Drug free and clear driving record at all times, • Experience in general construction (a plus but not required), • Experience in operating machinery (mini excavator, forklift, etc.) (a plus but not required), • Some travel (we try to keep team members home as much as possible), • OSHA 10 of 30 (a plus but not required), • Ability to complete all company safety programs, • Ability to read and write English, • 401(k), • Employee discount, • Paid health and life insurance, • Paid time off, • Referral program, • Safety training and certifications, • Membership in Local IBEW Electrical Union after 90 days, • Paid Union Dues, • 40-hour guarantee pay, • In Person

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grow into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime.Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-levelers., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are looking for a Level IV Generator Technician, you will install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (CAT, Cummins, MTU) Position Summary Level IV Technicians install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. Essential Duties Service Support • Perform basic preventive maintenance and assist others in performing intermediate and advanced corrective maintenance tasks., • Uses basic knowledge of engine/generator mechanical and electrical operation to perform tasks or assist others., • Replaces batteries, belts, and hoses; changes and/or tops off oil and filters., • Properly and completely fills out all service reports, PM checklists and timecards within department guidelines; Ensures they are legible and accurate with sufficient detail for service accounting needs., • Works on a flexible work schedule and responds to emergency calls as needed., • Obtains pre-assigned work orders by schedule date, customer name, service level and locate/load parts, check for any special instructions; Travels to job site, performs scope of work, provides detailed computerized template report and timecard upon work assignment completion for daily accountability., • Proficiently and accurately evaluate, test, diagnose and troubleshoot basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs. Communicate, plan, complete, and document all troubleshooting and repair procedures within standard repair times., • Performs load bank testing with full understanding of both Reactive/Resistive testing in accordance with applicable NFPA regulations or customer specific request., • Performs troubleshooting of block heater and battery chargers and replacement if needed., • Performs advanced troubleshooting and corrective maintenance; and assists or leads others in performing intermediate and advanced troubleshooting and corrective maintenance tasks on engines, generators, and other associated mechanical and electrical equipment., • Performs control panel conversions, re-tapping generator ends, and isolating/replacing faulty breakers., • Prepare various reports as directed to maintain accurate records on equipment and preventive maintenance., • Communicating with customers as necessary regarding the status of their equipment and ensuring strong relationships are maintained., • Works with Supervisor with technical issues and scheduling., • Maintain thorough knowledge of and actively practice and promote safe working activities in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment., • Report all recognized unsafe conditions or acts to Management., • Will provide and use their own tools that are necessary to complete the job requirements. Necessary tools listed in “Essential Tools” section., • Attend training sessions as required. Mechanics combination wrench set 3/8? to 1? (Metric & SAE) Pipe wrench set Mechanics screwdriver set Cordless impact drivers (3/8?, 1/2?, 3/4?) Mechanics pliers set Fluid pump Filter wrench Jumper cables or booster pack Mechanics 3/8? drive socket set 3/8” to 1” (Metric & SAE) Flashlight Mechanics 3/4? drive socket set 3/8? to 1? (Metric & SAE)Quality Multimeter Allen Wrench Set Up to ½” (Metric & SAE)Amp Meter Adjustable wrench set Phase rotation meter Core Values • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level ? Technician I ? Technician II ?Technician III ? Technician IV ? Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards Education • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Proficient with Microsoft Suite Applications

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are looking for a Level III Generator Technician, you will install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (CAT, Cummins, MTU) Service Support • Perform basic preventive maintenance and assist others in performing intermediate and advanced corrective maintenance tasks., • Uses basic knowledge of engine/generator mechanical and electrical operation to perform tasks or assist others., • Replaces batteries, belts, and hoses; changes and/or tops off oil and filters., • Properly and completely fills out all service reports, PM checklists and timecards within department guidelines; Ensures they are legible and accurate with sufficient detail for service accounting needs., • Works on a flexible work schedule and responds to emergency calls as needed., • Obtains pre-assigned work orders by schedule date, customer name, service level and locate / load parts, check for any special instructions; Travels to job site, performs scope of work, provides detailed computerized template report and timecard upon work assignment completion for daily accountability., • Proficiently and accurately evaluate, test, diagnose and troubleshoot basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs. Communicate, plan, complete, and document all troubleshooting and repair procedures within standard repair times., • Performs load bank testing with full understanding of both Reactive/Resistive testing., • Performs block heater installation and installs battery chargers., • Performs advanced troubleshooting and corrective maintenance; and assists or leads others in performing intermediate and advanced troubleshooting and corrective maintenance tasks on engines, generators, and other associated mechanical and electrical equipment., • Uses basic knowledge regarding Automatic Transfer Switch (“ATS”); electrical equipment, lights, motors, computers, etc., • Performs control panel conversions, re-tapping generator ends, and isolating/replacing faulty breakers., • Sets up, starts, and operates equipment as directed both in-house and at customer locations., • Prepare various reports as directed to maintain accurate records on equipment and preventive maintenance., • Maintain thorough knowledge of and actively practice and promote safe working activities in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment., • Report all recognized unsafe conditions or acts to Management., • Will provide and use their own tools that are necessary to complete the job requirements. Necessary tools listed in “Essential Tools” section., • Attend training sessions as required., • Mechanics combination wrench set 3/8" to 1" (Metric & SAE), • Pipe wrench set, • Mechanics screwdriver set, • Cordless impact drivers (3/8", 1/2", 3/4"), • Mechanics pliers set, • Fluid pump, • Filter wrench, • Jumper cables or booster pack, • Mechanics 3/8" drive socket set 3/8” to 1” (Metric & SAE), • Flashlight, • Mechanics 3/4" drive socket set 3/8" to 1" (Metric & SAE), • Quality Multimeter, • Allen Wrench Set Up to ½” (Metric & SAE), • Amp Meter, • Adjustable wrench set, • Phase rotation meter Core Values • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Teamwork: We succeed because we help our co-workers to succeed in a collaborative, supportive, creative, and enjoyable environment., • Customer Satisfaction: We aim to meet or surpass our customer’s expectations by providing the highest quality products and customer service. Bend over backwards, can-do attitude Why Join Worldwide Power Products • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level ? Technician I ? Technician II ?Technician III ? Technician IV ? Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards, • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Inventiveness, • Proficient with Microsoft Suite Applications

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are looking for a Level II Generator Technician, you will install, troubleshoot, repair, and maintain diesel and natural gas generators and engines ranging from 20 kW up to 500 kW. This role is responsible for identifying, troubleshooting, diagnosing, and providing quality repairs of electrical generator systems and related engine mechanical failures. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (CAT, Cummins, MTU) Service Support • Perform basic preventivemaintenance and assist others in performing intermediate and advanced corrective maintenance tasks., • Uses basic knowledge of engine/generator mechanical and electrical operation to perform tasks or assist others., • Replaces batteries, belts, and hoses; changes and/or tops off oil and filters., • Properly and completely fills out all service reports, PM checklists and timecards within department guidelines; Ensures they are legible and accurate with sufficient detail for service accounting needs., • Works on a flexible work schedule and responds to emergency calls as needed., • Obtains pre-assigned work orders by schedule date, customer name, service level and locate / load parts, check for any special instructions; Travels to job site, performs scope of work, provides detailed computerized template report and timecard upon work assignment completion for daily accountability., • Proficiently and accurately evaluate, test, diagnose and troubleshoot basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs. Communicate, plan, complete, and document all troubleshooting and repair procedures within standard repair times., • Performs load bank testing with full understanding of both Reactive/Resistive testing., • Performs block heater installation and installs battery chargers., • Complete all tasks in a neat, orderly, and safe manner, constantly seeking to improve methods and promote the safety of others., • Report all recognized unsafe conditions or acts to Management., • Will provide and use their own tools that are necessary to complete the job requirements. Necessary tools listed in “Essential Tools” section., • Attend training sessions as required., • Basic wrenches 3/8" (Metric & Standard), • Manometer, • Basic screwdriver set, • Fluid pump, • Basic pliers set, • Jumper cables or booster pack, • Filter wrench, • Flashlight, • Basic Socket Set 3/8” to 1” (Metric & Standard), • Quality Multimeter, • Allen Wrench Set Up to ½” (Metric & Standard), • Adjustable wrench set, • 3/8" impact, • Amp Meter, • Temperature Gun, • Phase rotation meter Core Values • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Teamwork: We succeed because we help our co-workers to succeed in a collaborative, supportive, creative, and enjoyable environment., • Customer Satisfaction: We aim to meet or surpass our customer’s expectations by providing the highest quality products and customer service. Bend over backwards, can-do attitude Why Join Worldwide Power Products • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level ? Technician I ? Technician II ?Technician III ? Technician IV ? Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards Education • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Proficient with Microsoft Suite Applications

Job DescriptionDescription: Competitive Pay | Comprehensive Benefits | Performance Bonuses | Employee Incentive Trips! Quick and simple hiring process—apply today, and we’ll be in touch soon! Clear path for career advancement with structured training and promotion opportunities. Power Up Your Career with Worldwide Power Products We are seeking a skilled In-Shop Generator Technician - Level III to join our team. This is a shop-based role working entirely inside our warehouse—no field service, travel, or company vehicle required. In this role, you will install, troubleshoot, repair, and maintain diesel and natural gas generators ranging from 20 kW to 500 kW. You will work in a controlled shop environment, ensuring equipment is fully tested, repaired, and ready for deployment. • Full-time, steady work, • Top-tier training and career growth opportunities, • Work on industry-leading engines (John Deere, PSI, Generac, Kohler, Multiquip, Isuzu) Shop-Based Service & Repairs • Perform preventive maintenance and assist with advanced corrective maintenance on generators and engines, • Diagnose, troubleshoot, and repair mechanical and electrical issues on diesel and gas generators, • Replace components such as batteries, belts, hoses, filters, and fluids, • Perform load bank testing (reactive and resistive), • Install block heaters and battery chargers, • Assist with generator rebuilds, control panel work, and electrical troubleshooting, • Work with Automatic Transfer Switches (ATS) and related electrical systems, • Set up, test, and operate equipment within the shop Diagnostics & Quality Control, • Accurately evaluate and troubleshoot generator issues (e.g., fuel systems, electrical faults, battery failures), • Document all repairs, diagnostics, and maintenance work clearly and accurately, • Ensure all equipment meets quality and performance standards before leaving the shop Team Support, • Assist in training and mentoring Level I & II technicians, • Follow all OSHA, EPA, and company safety regulations, • Maintain a clean, organized, and safe work environment, • Wear appropriate PPE at all times, • Provide and maintain personal tools required for the role, • Attend training sessions as required, • Mechanics combination wrench set 3/8" to 1" (Metric & SAE), • Pipe wrench set, • Mechanics screwdriver set, • Cordless impact drivers (3/8", 1/2", 3/4"), • Mechanics pliers set, • Fluid pump, • Filter wrench, • Jumper cables or booster pack, • Mechanics 3/8" drive socket set 3/8” to 1” (Metric & SAE), • Flashlight, • Mechanics 3/4" drive socket set 3/8" to 1" (Metric & SAE), • Quality Multimeter, • Allen Wrench Set Up to ½” (Metric & SAE), • Amp Meter, • Adjustable wrench set, • Phase rotation meter Requirements: What We’re Looking For Education • High school diploma or general education degree (GED), • Trouble-shooter, • Time Management, • Communication Skills, • Problem Solving, • Inventiveness, • Communication: We encourage open, effective dialogue through the exchange of ideas and solutions through all levels of our company and our customers., • Accountability: We are personally accountable for delivering on our commitments., • Integrity: We believe that to be successful, it is essential to operate at the highest levels of honesty, responsibility, and trust., • Teamwork: We succeed because we help our co-workers to succeed in a collaborative, supportive, creative, and enjoyable environment., • Industry leader with a strong reputation in power generation, • Career growth through on-the-job training, mentorship, and promotions, • Clear career advancement path: Apprentice/Entry Level | Technician I | Technician II |Technician III | Technician IV | Tech Lead/Supervisor, • Competitive pay and full benefits including medical, dental, vision, and a 401(k) match, • Paid trips and spot bonuses – every employee earned a bonus and an all-expenses-paid trip to Cabo the past two years, • State-of-the-art equipment and technology to do your job right, • A supportive team culture that values collaboration and expertise, • Nice work trucks, • Overtime opportunities, • $150 work boot allowance, Uniforms + free dry cleaning, • Access to company provided Hunting lease, • Hard Work Deserves Real Rewards

Job Description We are looking for safety-first, analytical, and experienced licensed apprentice and licensed journeyman electricians to join our team. You'll be assigned a variety of work orders, including fixing, replacing, installing, maintaining, and testing electrical wiring, circuit breakers, transformers, and lighting fixtures in buildings. The ideal candidate is familiar with reading technical schematics and blueprints, has extensive knowledge of electrical systems and wiring, and has completed all training, apprenticeship, and licensing requirements. If this is you, apply today! You must have a working history of 3 plus years of experience. Compensation: $17 - $29 hourly Responsibilities: • Read and apply electrical schematics, diagrams, blueprints, and wiring diagrams, • Certify that newly installed electrical components function properly, • Install wiring and other electrical components, and test to ensure they're properly connected, • Locate and correct electrical problems, including component installation and replacement, • Perform maintenance and installation of electrical equipment in schools and businesses., • Have reliable transportation, • PPE, hard hat, steel-toe boots, safety glasses, safety vest, • All Tools required to perform your jobQualifications:, • Strong communication skills, including tact and courtesy in dealing with others, • Candidate must have successfully completed an electrician apprenticeship, • Ability to lift 50 lbs, • Applicant must have a high school diploma or equivalent, • Must provide a valid ID and TDLR license, • Must pass a background check for badging to work in schoolsAbout Company HEC is a K-12 electrical construction company. We pay top dollar for electricians and offer consistent work in the public-school districts. These projects consist of remodels or new buildings from the ground up. Management feels that the employees, coupled with our projects, make us great! The experience of working on K-12 projects is unique in that we are part of the construction building blocks that will educate our future minds. We as electricians are excited about the new strides in technology, which is utilized in schools, that gives you a sense of worth to contribute to society as part of the future electrical workforce. The ability to recognize men and women who want the most out of their life is what makes us successful, and we can contribute to that growth through mentorship, skill set knowledge, and a fair treatment of individuals in a merit-based atmosphere.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: Traveling Journeyman Electrician Responsible for the installation of electrical systems in the commercial construction markets at job sites and small/medium project locations. Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis. Responsible for promoting excellent customer relations. Must be able to interact with the customer, determine their needs and provide solutions. Job Responsibilities • Report to project worksite on time and ready to work., • Exhibit a willingness to apply oneself, to learn, and to develop electrical skills., • Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided., • Complete work in accordance to national and local codes. Learn and keep current with latest revision of NEC., • Complete work in accordance with company policies and procedures., • Fulfill daily commitments and stay on project schedule as directed by job-site foreman., • Assist with loading materials, digging trenches, pulling wire through conduit, and other various tasks needed to complete project., • Treat all customers, other trades personnel, vendors, fellow workers, etc. with dignity and respect., • Keep job site clean before leaving and be kept clutter free during the work., • Complete paperwork including timecard and turn in when required., • Know, follow and hold others accountable to the safety policy, program and training of CESG., • Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits., • Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes., • Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring., • Measures, cuts, bends, threads, assemble, and installs electrical conduit., • Travel is a must., • Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps., • Connects wiring to lighting fixtures and power equipment., • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels., • Connects power cables to equipment, such as electric range or motor, and installs grounding leads., • Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement., • Repairs faulty equipment or systems., • High School Graduate or G.E.D. equivalent., • 4 years’ experience in electrical project installations., • Applicant must have reliable transportation., • Position requires electricians hand tools., • Ability to work with hands, multi-task., • Advanced electrical knowledge required., • Valid state motor vehicle operator's license & clear driving record to meet Company policy., • Applicable state certification. BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations 6nT65pUdvH

Job Description Are you ready to elevate your career with a company that values your skills, rewards your hard work, and gives you opportunities to grow? All Star A/C, Heating & Plumbing is seeking an Experienced Apprentice Electrician to join our expanding Electrical Division. This is your chance to be part of a positive, family-oriented team that's committed to excellence. Apply now and take the next step toward a brighter future! We don't just offer jobs, we offer careers with purpose. As our Experienced Apprentice Electrician, you'll earn $22–$24 per hour plus bonuses/spiffs for performance, and enjoy a full suite of benefits including: • Paid time off (PTO), • Dental, vision, and life insurance, • Uniforms provided, • Fun company parties, • Real growth opportunities, • Flexible scheduling THE TYPE OF EXPERIENCED APPRENTICE ELECTRICIAN WE'RE LOOKING FOR We're searching for someone who can meet the following qualifications: • Valid Texas apprentice electrician license, • 3+ years of residential or light commercial experience, • Familiarity with NEC and current Texas code, • Valid driver's license and clean driving record, • Excellent communication and problem-solving skills, • Team-oriented with a strong work ethic and professional appearance WHAT IT'S LIKE TO BE OUR EXPERIENCED APPRENTICE ELECTRICIAN This is a full-time position, Monday through Friday, 8 AM to 5 PM. Employees report to a central location before heading to job sites. As our Experienced Apprentice Electrician, you'll tackle hands-on electrical work-from installing lighting and running conduit to troubleshooting panels and supporting HVAC controls. You'll assist Journeyman and Master Electricians, maintain clean and organized workspaces, and deliver top-tier service that reflects our values. You'll be trusted to work safely, efficiently, and professionally while making a real impact in homes and businesses across Houston. ABOUT ALL STAR A/C, HEATING & PLUMBING Since 2010, All Star A/C, Heating & Plumbing has been a leading provider of residential plumbing and HVAC services in greater Houston. As a family-owned business, we operate on principles of honesty, integrity, and high standards for our customers and team alike. Our mission is grounded in HEART: Honesty, Exceptional Service, Accountability, Respect, and Teamwork. By investing in our team's growth, we enhance our service to the community. Join us and experience a supportive environment that values your contributions and fosters lasting careers. Don't miss this chance to join a company that's committed to your success. Apply now! Our initial application process is quick, easy, and mobile-friendly. Let's build your future together! Job Posted by ApplicantPro

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Apprentice Electrician supports the installation, repair, and maintenance of electrical systems under the direct supervision of a licensed or Master electrician. This role is designed for individuals developing their electrical skills and knowledge, with structured on-the-job training to advance toward full competency. Work is performed in a manufacturing environment with exposure to machinery, tools, and varying conditions. Responsibilities • Assist in installing, maintaining, and repairing electrical wiring, equipment, and fixtures in accordance with local and national electrical codes., • Support testing of electrical systems and continuity of circuits using testing devices., • Help troubleshoot basic electrical issues and perform corrective actions under supervision., • Measure, cut, and bend conduit using manual or power equipment., • Pull electrical wire and route cables through conduit systems and cable trays., • Assist with motor controls, lighting systems, power distribution, switches, transformers, and panels., • Maintain clean and safe work areas; follow all safety procedures and wear required PPE., • Prepare, organize, and transport materials, tools, and equipment for job tasks., • Perform basic documentation of work performed, materials used, and findings., • Shadow senior electricians to learn proper techniques, procedures, and best practices., • Participate in required training, apprenticeships, and certifications as applicable., • High school diploma or GED required, • Basic knowledge of electrical theory, safety, and tools., • Ability to read basic diagrams, blueprints, and schematics., • Strong mechanical aptitude and eagerness to learn., • Ability to follow instructions and work in a team environment., • Good communication and problem-solving skills., • Must be able to pass pre-employment screenings and background checks, • Strong attention to detail, safety awareness, and teamwork., • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed

Job DescriptionDescriptionIn Charge Electric – Aftermarket Division (Houston area) Come join one of the largest residential electrical construction companies in Texas! In Charge Electric is expanding our Aftermarket Division in Houston and hiring multiple licensed Service Electricians. These openings are for electricians who will be assigned to a dedicated lane based on experience and team needs: • Base Power Electricians (service, repair, upgrades, reliability solutions), • Apprentice Electrician (assist Electricians with service, upgrades, troubleshooting, repairs)If you’re a strong residential service electrician who takes pride in doing it right and enjoys helping customers understand their options, we want to talk with you. Full details of the compensation plan will be shared during the interview process. What You'll DoBase Power Electricians: • Diagnose and repair residential electrical issues and complete service upgrades, • Install/replace electrical components and recommend reliability/safety improvements, • Communicate clearly with homeowners and present solution optionsApprentice Electrician:, • Assist electricians with residential electrical installations, repairs, and service upgrades, • Prepare tools, materials, and job sites to ensure efficient workflow, • Support troubleshooting efforts and learn proper installation techniques, • Maintain a clean and safe work environment, • Licensed Electricians with 5+ years of residential service experience for Base Power Electricians, • Strong troubleshooting skills and knowledge of residential electrical systems, • Customer-focused communication; comfortable explaining solutions and upgrade options, • Detail-oriented craftsperson who values quality and consistency, • Results-driven, proactive problem solver with a “whatever it takes” mindset, • Valid Driver’s License and clean driving history, • Valid TX Residential Electrical license, • Willing to undergo pre-employment background checks, including criminal, driving, and drug screenings, • High school diploma or equivalentPreferred (Nice to Have), • Generac experience (Power Generator lane), • Competitive Pay: Earn a strong hourly wage with opportunities for commissions and bonuses., • Paid Time Off: Enjoy 8 paid holidays and accrue additional PTO for a healthy work-life balance., • Cutting-Edge Technology: Work with the latest tools and technology in the field., • Professional Development: Access comprehensive training in electrical skills, customer-focused sales, and leadership development to support your career growth.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: Electrician Apprentice Responsible for assisting journeyman and apprentices by carrying material, picking up supplies, cleaning shop floor etc. Job Responsibilities • Gathers tools and supplies to be used at work site., • Measures, cuts, and bends wire and conduit., • Drills holes for wiring and pulls or pushes wiring through opening., • Traces out short circuits in wiring., • Assists in lifting, positioning, and fastening objects such as wiring, conduit, and motors., • Performs minor repairs such as replacing fuses, light sockets, bulbs, and switches., • Maintains tools and equipment and keeps supplies and parts in order., • Disassembles defective electrical equipment, replaces defective or worn parts, and reassembles equipment., • Cleans work area, machines, tools, and equipment., • Performs other routine duties., • Applicant must have reliable transportation., • Position requires basic electricians hand tools., • Ability to work with hands, multi-task., • Some electrical knowledge helpful., • Valid state motor vehicle operator's license & clear driving record to meet Company policy., • Applicable state certification.BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations TkgoJfzAgq

Job Description Licensed Journeyman Electrician Job Type: Full Time, On-Site Who We Are: Southern Integrated Solutions and Consulting is a forward-thinking systems integration company offering an extensive range of services, products, and customized systems in sectors such as oil & gas, utilities, manufacturing, and mining. Our team composed of seasoned Electrical and Control Systems Engineers, Consultants, Project Managers, System Integrators, and I&E Technicians excel in Automation, SCADA, I&E Construction, Process Control, Safety Instrumented System Design, Safety Integrity Level Selection & Verification, Safety Lifecycle Modeling, Real-Time Data Collection, MCC & Switchgear Design, and Fabrication. Job Description: Southern Integrated Solutions and Consulting (SISC) is searching for an Electrical Journeyman. The ideal candidate for this position has a minimum of 3-5 years' electrical experience. The candidate under the general direction of the Companies Project Managers, Superintendents, and Foreman’s will perform electrical, communications and electronic activities. The Electrical Journeyman plays a key role in executing ongoing facilities maintenance and capital improvement projects. The Electrical Journeyman performs and directs the apprentices assigned to them in the daily job duties and tasks and performs other project related duties as required. The Electrical Journeyman position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. If you are a motivated individual who is passionate about technology and enjoys working in a collaborative and fast-paced environment, we encourage you to apply. Responsibilities: • Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis, • Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided, • Fulfill daily commitments and stay on project schedule as directed by job-site foreman, • Report project specific information to the assigned superintendent or Foreman on scheduled basis, • Ensure the occupational health and safety of assigned employees in accordance with state and federal regulations, departmental and District policies, and industry standards and practices, • Inspects work in progress to assure compliance with applicable codes and standards, project specifications, and quality assurance procedures, • Keep job site clean before leaving and be kept clutter free during the work, • Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits, • Measures, cuts, bends, threads, assemble, and installs electrical conduit, • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels, • Connects power cables to equipment, such as electric range or motor, and installs grounding leads, • Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement Education & Experience: • High School Graduate or G.E.D, • 3-5 years' experience in industrial electrical industry, • Must possess valid Journeyman Electrician License in either Louisiana or Texas, • Experience with using hand-tools and power tools., • Skill or experience reading and interpreting diagrams such as technical drawings or blueprints., • Strong communication, problem solving, and critical thinking skills., • High efficiency and time management skills., • Competitive salary with performance-based bonuses., • Comprehensive health, dental, and vision insurance with employer contributions., • Paid short-term and long-term disability, and life insurance benefits., • Voluntary benefits., • Retirement savings plan with company match. zeZxkSWejh

Job DescriptionCurrently ONLY ACCEPTING INDENTURED APPRENTICES(meaning must be in school) or have 8 plus years of experience in the field Responsibilities • Assists in installation, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment, • Helps Assemble, install, test, and maintain electrical or wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools, • Reads and interpret maps, instructional manuals, specifications, work site directions, blue prints and written instruction, • Performs physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects, • Performs special projects and completes all other duties as assigned or requested for the general support of the field organizationRequirements, • Possess Valid State of Texas Apprentice Electrician License and valid or pending B.A.T. certification, levels 1 - 8, • Possesses valid Driver’s License, • Ability to work from ladders, scaffolds and roofs to install, maintain or repair electrical wiring, equipment, and fixtures, • Ability to frequently walk, stoop, kneel, reach and climb in inclement weather with exposure to extreme cold, heat, noise & dust, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off MwvG6ziYVz

Job DescriptionJob Description – Foreman (FM) Position Title: Foreman (FM) Reports To: Superintendent (SU) Direct Reports: Journeymen, Apprentices, Mechanics Position Overview The Foreman (FM) is responsible for direct supervision of assigned crews and the execution of electrical work in the field. The FM ensures installations are performed safely, on schedule, within budget, and in compliance with Hays Electrical quality standards and codes. This role bridges the gap between field crews and the Superintendent, maintaining daily labor tracking, enforcing production plans, and fostering crew development. The Foreman plays a key role in driving labor productivity, implementing project plans, and supporting the cultural initiatives of Hays Electrical. Key Responsibilities Leadership & Oversight • Lead and supervise daily work of Journeymen, Apprentices, and Helpers., • Assign tasks to crew members in alignment with labor plans and project schedule., • Provide daily coaching, training, and mentorship to apprentices and journeymen., • Enforce accountability for safety, quality, and production on site.Operational Execution, • Interpret drawings, specifications, and labor plans to direct field installations., • Ensure scope is executed per project requirements, NEC, and Hays standards., • Track crew hours daily and report production to Superintendent per Hay’s labor codes, • Identify obstacles impacting schedule or production and escalate to Superintendent with appropriate field documentation, • Conduct daily jobsite safety huddles and ensure toolbox talks and JHA’s are completed., • Monitor installations for quality and compliance with QA/QC requirements., • Ensure crews follow NEC, OSHA, and Hays Electrical policies., • Immediately correct or escalate deficiencies to minimize rework.Financial & Performance Management, • Monitor crew labor performance against budgeted hours., • Accurately record daily timecards and ensure alignment with actual production., • Support Superintendent with data for WIP tracking and labor forecasting.Communication & Culture, • Communicate daily progress, manpower needs, and risks to Superintendent., • Act as first point of contact for crew concerns, escalating issues as necessary., • Promote and model Hays Electrical’s core values: Excellence, Safety, Drive, Communication, Client Focus., • Strong leadership ability with proven success leading crews in the field., • In-depth technical knowledge of electrical installations, sequencing, and methods., • Ability to read and interpret construction drawings, specifications, and schedules., • Proficiency with basic reporting tools (Daily Logs, Excel, or company trackers)., • Strong communication skills to direct crews and coordinate with leadership., • Ability to enforce safety, productivity, and quality standards consistently. Qualifications • 3+ years of experience in electrical construction., • At least 1 year of supervisory experience (Leadman or equivalent role)., • Journeyman Electrician license required., • Demonstrated success meeting productivity, quality, and safety standards on multifamily or commercial projects., • Reports to: Superintendent (SU), • Direct Reports: Journeymen, Apprentices, Mechanics 1. Labor Productivity & Forecasting • Maintain crew labor hours within ±5% of budget., • Daily production reports submitted with 100% accuracy.2. Schedule Performance, • 92%+ of daily/weekly tasks completed as planned., • On-time execution of assigned project phases or scopes.3. Quality & Compliance, • 92%+ compliance rate on QA/QC inspections., • Minimal repeat deficiencies or punch-list items from assigned crew.4. Safety, • 100% completion of daily safety huddles and toolbox talks., • Zero tolerance for unsafe acts; immediate corrective action enforced in alignment with Hays Policy5. Financial & Reporting, • Timecards and production reports submitted accurately and on time (target: 100%)., • Labor efficiency is maintained within budget projections.6. Team Development & Culture, • Apprentice progression documented and supported., • Active participation in cultural initiatives (Bootcamps, Trailblazer, training). gI1R4h9onD

Job DescriptionDescription: Title: Apprentice Electrician Department: SPJ- Electrical team Reporting To: Master Electrician Position Status: Full Time FLSA Status: Non-Exempt Location: SPJ- Houston We are Ashford Communities. Creating a place to belong where superior experiences are created. Our Purpose The Ashford team is growing, and we are looking for our next Ashfordian! Are you ready to embark on an exciting journey with Ashford Communities, Houston, Texas' premier property management company? We are seeking a Master Electrician who can bring their Strong work ethic, attention to details and willingness to grow, skills to the table. Our company is known for its work hard, play hard philosophy, and we're on the hunt for someone who can keep up with our vibrant and dynamic team. Who is Ashford Communities? At Ashford Communities, we're not your typical property management company. We take pride in being a year over year Best and Brightest Company to work for, and we have the awards to back it up! Our dedication to creating an exceptional living experience for our residents is unmatched, and our comprehensive benefits package and career advancement opportunities are just the beginning. We believe in going above and beyond to ensure our residents feel at home, and we're seeking a Sales Leasing Professional who shares our commitment to providing exceptional experience. Position Overview We are looking for a motivated Electrical Apprentice to grow with our team. This role is ideal for someone eager to gain hands-on experience, learn from licensed professionals, and build a long-term career in the electrical trade. Skills to be Successful · 1–4 years of field experience in electrical work (preferred). · Familiarity with rough-in, trim-out, or service work is a plus. · Must be eligible to obtain an apprentice card. · Strong work ethic, attention to detail, and willingness to learn. · Ability to take direction and work as part of a team. Experience Preferred • Previous 1–4 years of field experience in electrical work (preferred). experience!, • Bilingual in both English & Spanish – plus!, • Excellent written and verbal communication skills. Our Core Values – TEACH Do the Ashford Core Values resonate with you and your work ethic? You may be our next Ashfordian. • T: Teamwork, • E: Excellence, • A: Attitude, • C: Caring, • H: Honesty Our Benefits Portfolio At Ashford Communities, we believe in recognizing and rewarding our exceptional team members. In addition to a competitive salary, we offer a generous benefits package that includes health insurance, plenty of coffee, snacks, and more. We even pay our employees for their referrals if they're hired! • Medical – United Healthcare & MEC Plan, • Dental, • Vision, • Life Insurance, • Short-Term Disability, • Supplemental Hospital & Accident Insurance, • EAP Program for Employees & Family Members, • Paid Holidays, • PTO: Vacation & Sick Time, • Learning & Career Development Programs, • Leadership Development with Ashford University, • Quarterly Community Give-Back Events, • Monthly Happy Hours So, if you're ready to join a company that embraces the work hard, play hard philosophy, where every day is an opportunity to provide an extraordinary experience for our residents, then Ashford Communities is the perfect place for you! Apply now, and let's create something amazing together. How to Apply Interested applicants should apply online and submit their resumes and cover letters detailing their relevant experience and why they are the best fit for this position on the Ashford Communities Careers Page – HERE. Ashford Communities is proud to be an equal opportunity workplace. We do not discriminate based on race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service, or any protected category prohibited by local, state, or federal laws. Requirements: Qualifications • Experience Requirement: A seasoned apprentice with 3 years or more of experience in the electrical field., • Basic Electrical Knowledge: Understanding of electrical principles, circuits, and systems in accordance with the NEC., • NEC Compliance: Familiarity with the National Electrical Code and its application in electrical installations., • Conduit Installation: Ability to install conduit systems following NEC guidelines for routing electrical wiring., • Pipe Bending: Proficiency in bending conduit pipes accurately to fit specific project requirements while adhering to NEC standards., • Wire Installation Methods: Knowledge of different wiring methods and techniques, including cable pulling and termination, according to NEC regulations., • Physical Fitness: Ability to work in various environments, climb ladders, and lift heavy equipment., • Attention to Detail: Precision is crucial in electrical work to ensure safety and compliance with NEC standards., • Problem-Solving Skills: Ability to troubleshoot electrical issues within NEC guidelines and find solutions., • Teamwork: Willingness to learn from experienced electricians, collaborate with other team members, and adhere to NEC regulations., • Safety Awareness: Knowledge of safety procedures and NEC regulations to prevent accidents and injuries., • Communication Skills: Ability to communicate effectively with supervisors, team members, and adhere to NEC specifications., • Technical Aptitude: Willingness to learn how to use tools and equipment specific to the electrical trade, ensuring NEC compliance.