Electrical engineering technician jobs in Chula Vista, CaliforniaCreate job alerts

ABM Industries is seeking an Electrical Field Test Technician (NETA 2 or equivalent experience) to join our Electrical Power Services team. The Electrical Field Test Technician is responsible for the safe and efficient installation and testing of electrical power distribution equipment for customers in the assigned territory. In this role, you will travel approximately 25% of the time, working both independently and with a crew, and handle the performance and management of routine, moderately complex, and complex tasks and projects, record-keeping, evaluation of test data, and preparation of field service reports. Position Summary Pay: $40.00-$45.00. The pay listed is the base hourly rate + plus available paid overtime. The pay listed is the salary range for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit Essential Functions • Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems., • Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties., • Guide, mentor, train, and supervise Level 1 and 2 certified NETA Trainees and Assistant Technicians., • Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians, • Track project scope completion and communicate ABM and Customer Management, • Maintain, test, repair, rebuild, and replace low, medium, and high-voltage switchgear and circuit breakers., • Troubleshoot automatic transfer switches., • Test and inspect low, medium, and high-voltage cable installations., • Maintain, test, and repair transformers and related equipment., • Test and calibrate solid-state and electromechanical relays., • Perform relay calibration and power metering., • Conduct low and medium-voltage motor control center and contractor testing., • Start-up, troubleshoot, and repair generator controls and transfer schemes., • Test and commission protection and control systems on high voltage substations., • Sample and interpret insulated fluids., • Complete Job Hazard Analyses including but not limited to arc-flash and shock analyses, • Review and submit timecards, expense, and project reports., • Document test results and complete field reports., • Rotate emergency on-call duty., • Maintain strict compliance with regulatory laws, • Must have a minimum of 3 years experience in electrical testing., • The candidate should have experience working with a team., • Experience in working on projects, • Familiar with NFPA70E Electrical Safety standards, • Ability to troubleshoot electrical performance deficiencies, • Ability to travel regionally 25%, • Knowledgeable in lockout/tag-out and hazardous energy control procedures., • Familiar with NETA Acceptance and Maintenance Testing Standards, • NETA certified Level 2 or NICET or equivalent experience #200 About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

Job Description The Maintenance Technician ensures the integrity of building systems by performing routine maintenance and minor repairs while supporting the efficient operation of equipment. This role provides hands-on support for general maintenance tasks under the supervision of the Chief Engineer or Assistant Chief Engineer. Hours are 8:30am - 5pm, 3 days a week. Essential Duties and Responsibilities: • Perform repairs in restroom facilities, including toilets and soap dispensers; clear drains using plungers and handheld augers., • Conduct general labor tasks, such as carrying, stacking, and sorting materials; debris removal., • Safely use employer-provided vehicles to travel for parts and supplies, adhering to all traffic laws., • Maintain and/or replace door hardware; handle minor furniture repairs and floor maintenance; and conduct basic painting tasks in equipment rooms; and perform general cleaning in mechanical spaces., • Perform maintenance tasks as assigned; conduct cleaning and inspections of engineering areas, mechanical spaces, and equipment., • Replace lamps, air filters, ceiling tiles, and fire extinguishers., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards; participate in safety audits., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Interact with tenants, engineers, and contractors while carrying out maintenance tasks., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards and participating in safety audits., • HS Diploma or GED required, • Technical or vocational training, and/or 1-2 years of on-the-job training in one or more of the following areas: HVAC, electrical, mechanical, process controls, or plumbing, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Possess engineering and trade licenses required according to local, state, or national requirements, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. #IND123 Pay Range$22—$22 USD Over its 40 year history, Trigild has managed and operated hundreds of commercial properties. Trigild has expertise in managing a wide array of commercial real estate assets and operating businesses. Trigild leverages its expertise in property management, receivership, fiduciary, operations, consulting, and disposition services under one roof – for maximum service and value. Visit . Our portfolio includes Hotels, Multifamily Complexes, Office Buildings and Hospitality Properties (including restaurants, golf courses, amusement parks). Additionally, Trigild is the nationally recognized authority on non-performing commercial loans that combines Receivership/Trustee, Management and Disposition services under one roof. That means no coordinating multiple companies, and no duplication of fees. We have the expertise to quickly take control of the assets, maximize operating results, and speed recovery by selling the assets quickly through our national network of industry contacts. . Whether you are looking for commercial management services or a new level of performance on commercial loan recovery, Trigild can maximize value. All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. Trigild does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Trigild to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Trigild will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job Description COMPANY DESCRIPTION: Syner-G BioPharma Group is a science-led, strategic partner for life science companies. We provide integrated regulatory and biopharmaceutical development services spanning early development to post-market, along with operational strategy and support. With a global team of 400 employees across North America and India, our goal is to help our partners navigate the complexities of product development and accelerate their journey to market. We are a leading life sciences consultancy committed to advancing human health by helping organizations bring life-saving innovations to market faster, at scale, and with the highest quality. Our team partners with a diverse range of clients across the life sciences industry, supporting critical phases of the drug development lifecycle, from discovery and regulatory approval to technology transfer and the support in capital projects. We provide strategic guidance and hands-on expertise to streamline operations, enhance quality systems, and ensure regulatory compliance, empowering our clients to navigate complexity and deliver impactful therapies to patients worldwide. Syner-G BioPharma Group was recently honored with BioSpace's prestigious "Best Places to Work" 2025 award, for the second consecutive year, along with many other award-winning programs to make a career here truly life-enhancing. These recognitions are a testament to our commitment to fostering a positive and engaging work environment for our employees, with a particular emphasis on culture, career growth and development opportunities, financial rewards, leadership, and innovation. At Syner-G, we recognize that our team members are our most valuable asset. Join us in shaping the future, where your talents are valued, and your contributions make a meaningful impact. For more information, visit POSITION OVERVIEW: We are seeking a Facilities Technician with experience in the management, execution, and day-to-day support of building and plant operations, including labs, manufacturing plants, utilities, equipment, and systems. The ideal candidate will perform routine inspections, maintain documented records, and be on-call for emergencies, ensuring compliance with regulatory requirements and GMPs. Effective communication and collaboration with various departments are essential to meet the facility's needs and quickly resolve any issues. WORK LOCATION: Travel to client sites may be required up to 100%, based on project demands and client expectations. KEY RESPONSIBILITIES: (This list is not exhaustive and may be supplemented and changed as necessary.) • Schedule, coordinate, and oversee outside service providers for routine CM and PM Program tasks provided under building, system, or equipment maintenance contracts., • Support verification and maintenance with PIDs, HVAC, electrical, one-lines, and process flow diagrams (PFDs)., • Ensure all Corrective Maintenance and Preventative Maintenance Program tasks are completed and documented properly according to policies and procedures., • Perform, schedule, coordinate, and oversee emergency troubleshooting and repair on various HVAC, mechanical, utility systems, and lab and manufacturing equipment (GxP and non-GxP)., • Perform routine inspections of equipment and facility utilities to identify any issues before they become major problems, looking for signs of wear, leaks, or any abnormalities., • Maintain documented records of inspections, preventative maintenance activities, and any repairs following approved SOPs and Work Instructions to ensure compliance, audits, and tracking the overall state of the facility, utilities, and equipment., • Respond to alarms and emergencies, such as equipment failures or power outages, with a clear understanding of the facility's emergency response procedures., • Work closely with other departments, such as engineering, manufacturing, quality control, and research and development, ensuring effective communication to meet the facility's needs., • Troubleshoot systems to quickly identify and resolve issues. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the education, experience, skills, knowledge, and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Education: • Minimum of 2-6 years of Project/Facilities Engineering experience or experience working as a General Contractor, Construction Manager, or Subcontractor., • Facilities background preferred., • Process Equipment experience., • CAPEX experience., • GMP cleanroom experience., • Adhere to all procedures, safety protocols, wear appropriate personal protective equipment (PPE), and be aware of emergency procedures., • Familiarity with regulatory requirements and good manufacturing practices (GMPs)., • Must have strong collaboration, communication, prioritization, and problem-solving skills. Physical Demands: The physical demands described here are representative of the requirements that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use a computer keyboard and mouse; reach with hands and arms; talk and listen. The employee is frequently required to walk and sit, as well as to lift and carry objects such as books and files weighing up to 25 pounds. The employee is occasionally required to stand, stoop, or kneel. Specific vision abilities required by this position include close vision and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job, including moderate noise level, an indoor temperate environment, and light levels that are bright and conducive to minimal eye strain, typical for an office environment. TOTAL REWARDS PROGRAM: We define total rewards as compensation, benefits, remote work/flexibility, development, recognition, and our culture with programs that support each of our reward pillars. This includes a market competitive base salary and annual incentive plan, robust benefit offerings, and ongoing recognition and career development opportunities. Employees also enjoy our generous flexible paid time off program, company-paid holidays, flexible working hours, and fully remote work options for most positions and the ability to work "almost anywhere." However, if a physical work location is more for you, we have office locations in Greater Boston; San Diego, CA; Boulder, CO; and India. Currently, Syner-G is unable to sponsor or take over sponsorship of an employment Visa at this time. LEGAL STATEMENT: Syner-G BioPharma Group is proud to be an Equal Employment Opportunity and Affirmative Action employers. All employment decisions, including the recruiting, hiring, placement, training availability, promotion, compensation, evaluation, disciplinary actions, and termination of employment (if necessary) are made without regard to the employee's race, color, creed, religion, sex, pregnancy or childbirth, personal appearance, family responsibilities, sexual orientation or preference, gender identity, political affiliation, source of income, place of residence, national or ethnic origin, ancestry, age, marital status, military veteran status, unfavorable discharge from military service, physical or mental disability, or on any other basis prohibited by applicable law. Syner-G BioPharma is an E-Verify employer.

Job Description POSITION SUMMARY: The Product Test Technician plays a key role in testing hardware and firmware development of new and in-market embedded M2M/IOT devices. Products include wireless location tracking device, Android based tablets. The ideal candidate must be a quick learner and have a passion for technology. The candidate must be able to function in a fast-paced small company environment, wear multiple hats and independently solve problems with minimal supervision. This position has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES: -Independently execute test plans to validate device hardware and firmware/software releases -Perform regression testing on existing features and maintain resolution of previously solved bugs -Contribute to QA process by proposing and implementing new test procedures and test plans according -Prepare written test reports for engineers to implement appropriate software fixes -Interest in learning and applying process improvement practices -Occasional local travel to field testing facility and customer sites to execute test plans and troubleshoot deployed devices -Other duties as assigned by management QUALIFICATIONS: -Associate degree in science, technology, or engineering field and/or 1 year of experience in a hands-on technical support role -High School Degree considered with 2+ years of relevant work experience -4+ years military experience in a technical job field also considered -Knowledge of PCBs and experience soldering and operating electrical test equipment (power supplies, multimeters, oscilloscopes) -Proficient in Microsoft Word and Excel RELEVANT SKILLS – PREFERRED, NOT REQUIRED: -Experience with electrical monitoring equipment required (power supplies, multimeters, waveform generators, oscilloscopes) -Knowledge of PCBs and experience soldering -Knowledge of GPS and wireless data (Cellular, Wi-Fi, Bluetooth) devices -Knowledge of JAVA, C or C++ -Knowledge of serial communication protocols (I2C, SPI, UART, RS-232, USB) -Interest/knowledge in golf and small motor vehicles is a plus PHYSICAL REQUIREMENTS: -This position operates in a professional office environment and routinely uses standard office equipment -The ability to sit, stand or walk for extended periods of time (8+ hours/day) -The ability to lift to 30 lbs. (with or without assistance) -The ability to push, pull, bend, kneel, reach, stoop, and crouch -Specific vision abilities required by this job includes near, far, peripheral and depth and ability to adjust focus (with or without the use of corrective lenses) -Frequent exposure to outside working conditions GENERAL SKILLS/COMPETENCIES: -Computer Literacy / Information Technology – Experience using Windows, Microsoft Office Suite, Android smartphone / tablet devices, Apple iPads, and iPhones. -Problem Solving – Ability to identify and work through problems without supervision -Time Management – Manage one’s own time and the time of others -Critical Thinking – Use logic and reason to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems -Active Learning – Understand the implications of new information for both current and future problem-solving and decision-making -Communication Skills – Must possess excellent verbal and written communication skills TRAVEL REQUIREMENTS: -Requires up to 20% local travel SUPERVISORY RESPONSIBILITIES: -None The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR 33eYrLcu62

Job DescriptionControls Technician Controls Technician Position Overview The Controls Technician is responsible for the installation, maintenance, and repair of control systems for HVAC, chillers, building automation systems (BAS), and boilers. This role requires technical expertise to optimize system performance and ensure efficient operation. Key Responsibilities • Install, program, and troubleshoot control systems for HVAC, chillers, BAS, and boilers., • Perform routine maintenance and inspections on control systems to ensure optimal performance., • Collaborate with engineering and technical teams to design and implement control strategies., • Respond to service calls for control system issues and provide timely solutions., • Maintain accurate records of work performed, including service reports and maintenance logs., • Stay updated with industry trends and advancements in control technologies.Qualifications, • Associate's degree in Electrical Engineering, HVAC Technology, or related field., • Minimum of 3 years of experience in controls or HVAC systems., • Strong understanding of BAS controls, chillers, and boiler systems., • Proficiency in programming and troubleshooting control systems., • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Bonus - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/22/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: SSI is seeking an RF Engineering Technician with a broad range of experience in communications systems to work onsite in San Diego, CA (Topside). The successful candidate will have opportunity to perform with self-driven autonomy to meet system engineering objectives. The work will be generally performed in designated facilities, and the candidate will benefit from a 9/80 schedule, with every other Friday off. This position to be available November 2025 timeframe. At a high level, this position involves development, execution, and maintenance of a compliance test program for MUOS, a WCDMA-based satellite system. As a support staff to a DoD organization, a successful candidate will be part of a larger team developing and executing a certification test program, spanning technical, functional, and performance requirements. This position will expect the candidate to become well-versed on a vast quantity of information and eventually grow towards the Sr. Systems Engineer. This offers significant opportunity to grow in breadth of knowledge and experience, working with large organizations, third party vendors, hands-on test equipment, live and test systems, security concepts, diagrams and models, configuration management, troubleshooting, and, at times, reverse-engineering. Requirements: • 2+ years of experience in a System Engineering or System Analyst position, with a focus on communications systems and protocols, • Bachelors in electrical engineering, Computer Engineering, Computer Science or related field is desired, • Experience in supporting MUOS Waveform and MUOS MIL-STD Development, Testing and Engineering or similar knowledge of Military Satellite Waveform, Military SATCOM and MIL-STD Development & Testing and Engineering., • Basic understanding of security principles (COMSEC equipment, key management, PKI maybe), • Basic understanding of networking principles (IP addresses, basic routing protocols, linux and windows, subnets, default routes, etc…), • Junior-to-mid level scripting languages: perl, python, bash/shell, or javascript., • Communication principles (ideally wireless, cellphone technology such as 3G/4G-LTE/5G or WCDMA, CDMA, signal processing knowledge, • Familiarity with Test Equipment such as oscilloscopes, spectrum analyzers, signal generators, noise generators, • Experience with cellular technology highly desired, • Comfortable with Microsoft tools: Word, Excel, Powerpoint, Sharepoint, Outlook, TEAMs,, • Able to communicate clearly, summarize work, write reports, and interface with internal and external customers.

Job Description Duration 12 months Description Chipton-Ross is seeking 4 V-22 Aircraft Maintenance and Modification Technician C's for a contract opportunity in NAS North Island, CA. 100% onsite BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): o Active Secret Security Clearance is required for this position. o Experience with V-22 Maintenance/Modification. o Ability to travel future short-term domestic travel up to 25%. o At the sole discretion of leadership, must be willing and able (on potentially short-notice) to travel to a variety of locations (domestic, Military Bases CONUS plus Hawaii) and for a variety of durations to meet customer needs and the statement of work. Unless compelling reasons exist, failure to travel will be considered as a resignation. o Regular and predictable attendance is required. POSITION RESPONSIBILITIES: Client is seeking Experienced V-22 Aircraft Maintenance and Modification Technician to support CMV-22 Maintenance & Modifications at NAS North Island, CA. o CMV-22 Modification & Maintenance Teams. o Must be knowledgeable in aspects of V-22 aircraft maintenance, modification and repair to include skill and experience in either Electrical and Avionics or Airframes system subject areas. o Candidate must have knowledge of general aircraft maintenance and environment processes (FOD control, tool control, health & safety). Your duties will include (but are not limited to): o Independently assembles, disassembles and fixes numerous assemblies by changing, removing and replacing aerospace components, using general aerospace maintenance practices and aerospace product specifications to correct failures. o Removes and replaces components for repair, replacement or testing, to support product serviceability. o Resolves and corrects routine problems during operation, maintenance and overhaul of deliverable products. o Coordinates assembly, disassembly or overhaul functions to ensure adequacy, accuracy and thoroughness of product assembly, disassembly and overhauls. o Independently performs routine and complex functional/diagnostic tests and solves problems aerospace/missile systems, using monitoring instruments and bench/automated test equipment, to resolve root cause of initial or isolated failures. o Performs validation/verification testing of systems and components to ensure serviceability. o Solves problems for customers, using established fault isolation procedures, in order to isolate routine mechanical or electrical faults. Fixes with limited/little engineering or co-worker assistance. o Calls out repairs, however consults engineering and customer with results, if needed. o Independently documents repairs, test results, applicable modifications and inspection results, using specific, detailed instructions and established processes and procedures, to ensure contractual and regulatory compliance. o Verifies and ensures correctness of detailed instructions and procedures to modify, fix, repair and test assemblies. Assists engineering to rectify discrepancies found by technicians. o Properly identifies discrepancies found with parts and assists with reconciliation of discrepancies. o Visually inspects component before installation or usage to verify cleanliness and serviceability of components. Identifies and documents discrepancies found during inspection. o Independently performs modifications to satisfy deliverable products. o Ensures adequacy, accuracy and thoroughness of product modification. Work statement is a non-managerial role, non-leadership role. PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE: o FAA Airframe and Powerplant License preferred. o Quality Assurance experience preferred. o Extensive Depot-level modification experience preferred. REQUIRED EDUCATION: Accredited High school diploma or GED and typically 4 or more years' related experience or an equivalent combination of education and experience. WORK HOURS: Full-Time/First Shift 6:00 AM - 2:30 PM Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date. Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please. Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations. © 2025 Chipton‐Ross Inc. All rights reserved

Job Description TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions. At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo. Our Engineering Team is seeking an onsite Associate Lab Support Engineer. You would be responsible for conceptualizing ideas with engineers, using a breadth of experience and expertise to provide custom fabrications and prototypes and deliver clean, consistent, and reliable results. Whether you're tackling mechanical or electrical tasks, troubleshooting design challenges, or providing technical input, your work will directly enhance product performance and customer satisfaction. Enhancing cohesiveness and maintaining team morale is a responsibility of all our team members, as is the ambition for self-improvement and talent development. Through this dedication to unity and professional advancement, each team member is directly impacting the successful outcome of TrellisWare's deliverables and setting the tone for our core values of delivering excellence, pushing boundaries, and empowering people. The essential duties and responsibilities include: • Performs fabrications, alterations and other technical work on electronic and mechanical components as requested., • Repairs electronic and mechanical assemblies as requested., • Remains available and responds rapidly to support programs with various last-minute items such as fixing prototypes, last minute assembly corrections, etc., • Makes changes to hardware boards, including cutting traces, changing parts, and running fine wiring, to improve operative performance., • Inspects product design for problems or errors., • Assists with troubleshooting and debugging of electronic components., • Contributes to the development of prototype drawings and processes for engineering first runs., • Provides suggestions for ways to improve product design and implementation approaches for electronic and mechanical components., • Creates test assemblies for manufacturing and ATE., • Creates custom audio, data and power cables for customer use cases, and builds other custom components as requested and as feasible., • Manages consumable supplies stock (cable stock, common components, etc.)., • Maintains specialized lab tools (crimpers, solder irons, etc.), • Assists with engineering purchasing when requested., • Ensures that all safety procedures are observed during lab work., • Performs other duties as assigned., • Develops relationships with team members built on trust and respect. Education and work experience requirements are: • At least ten (10) years overall experience of applicable technician experience. To be considered for this position, you would need to meet, at a minimum, the knowledge, skills, and abilities listed here: • Expert or specialist skills in:, • Electricity and electronics., • Soldering techniques., • Fine-pitch CCA rework., • Assembly and modification of electronic racks., • Troubleshooting of complex electrical and mechanical engineering systems down to the component level., • Strong mechanical aptitude., • Exceptional attention to detail and patience in working with small, meticulous and complex components., • Exhibits solid customer service and interpersonal skills., • Demonstrates ability to translate technical jargon into layman's terms for explanatory purposes., • Demonstrates ability to work independently without supervision., • Willingness to seek out additional input and clarification when provided with incomplete or ambiguous instructions., • Self-directed and prioritizes projects appropriately., • Demonstrated ability to design, propose and implement solutions to complex problems., • Establishes and maintains customer (internal and external) trust and respect., • Demonstrates strong technical documentation skills and proficiency with PC office applications., • Demonstrates strong written and verbal communication skills., • Strong collaborative drive and interpersonal skills., • Strong initiative, proactive work ethic and prioritization skills., • Trustable judgement and analytical problem-solving skills., • Effective execution and decision making., • Champion of change and promotes innovation. The physical demands described here represent those that must be met in order to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable those with qualified disabilities. • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear., • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc., • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Additional requirements are: • U.S. Citizenship or Permanent Residency Note: Many of TrellisWare's positions require a security clearance or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is for individuals located in the San Diego, CA area. The pay range for this position is: $100,000-120,000 annually. Disclaimer - The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason. #LI-Onsite Job Posted by ApplicantPro

Job Description Construction Safety Consulting Firm is seeking an Experienced Safety Professional, CHST/CSP in the San Diego, CA area. Candidate is willing to undergo a resume screening and interview process not only with us, but also with our clients for consideration Candidate must be able familiar with and perform the following: 1. Be a certified Safety Professional (CSP), or Construction Health and Safety Technician (CHST) current designation through Board of Certified Safety Professionals (BCSP);, 2. Have a minimum of OSHA 30-hour training, First Aid/CPR/BBP and AED training;, 3. Have a four-year degree in Occupational Safety and Health, Industrial Hygiene or Engineering with at least seven (7) years of construction safety experience;, 4. A good working knowledge of basic computer packages like Microsoft Office (Word, Excel, PowerPoint, etc.);, 5. Experience walking construction sites to ensure work is being done according to all applicable procedures (SOPs, SSSPs, MOPs) and making sure the construction site is being maintained in a safe and clean manner. o working on large construction projects o working as the project owner vs the GC or subcontractor safety representative o working in facilities that are in operation (not just new construction) o with common construction software applications like: Hammertech, ProCore, Revit, etc.; 6. Conduct scheduled orientations, safety meetings, complete minutes and conduct follow up as required; 7. Identify deficiencies and report said deficiencies to client; 8. Investigate accidents and provide reports; 9. Have an established track record of project management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing; 10. Have a demonstrated ability to train others. We offer competitive salary and employment package: Personal/sick days Health Insurance (medical,dental,vision) Eligibility for an end-of-year bonus Site Safety, LLC is an Equal Opportunity Employer - minorities/ females/ veterans/ individuals with disabilities/ sexual orientation/ gender identity. Job Type: Full-Time Job Type: Full-time Pay: $50.00 - $54.00 per hour People with a criminal record are encouraged to apply. License/Certification: • OSHA 500 (Required) Work Location: In person

Job DescriptionField Service and Support Engineer ManagerThe Field Service and Support Engineer Manager is a customer facing role responsible for supporting product lines for our client's clean energy solutions. Responsible for providing superior customer service, fast response times and effective solutions to product issues while managing a team of field service technicians. The Field Service and Support Engineer Manager will work closely with Engineering, Quality, Sales, and Production to resolve product issues and satisfy customer expectations and requirements promptly and efficiently. Grow with us: • Location: San Diego, CA, • Salary Range: $95,000 - $110,000 (offer, depending on experience & skill set), • Our client offers a robust benefits package, PTO and 401k plan with a company matchEssential Functions and Duties, • Provide exceptional technical service and support to internal and external customers to ensure the highest level of customer satisfaction., • Deep knowledge of electrical/electronic schematics and understanding of mechanical designs., • Troubleshoot and failure analyze product issues via email, phone, or traveling to customer sites., • Communicates with customers, creates quotes for work not under warranty, and schedules service work to be done in the field., • Generate, track, and report Key Performance Indicators (KPIs) for the department., • Understanding of all product documentation required to repair the product to specification., • Technical documentation of processes and procedures., • Excellent project management skills with the ability to prioritize work., • Identifies areas for improvement, translates these into requirements and drives to implementation., • Drive service capacity growth on the territory through improving technician recruitment, retention, and efficiency., • Creates new or modifies existing processes accordingly and trains teams, embeds in onboarding training-program., • Develop programs to improve technical and customer service skills of service staff., • Ability and experience providing customer facing support while remaining professional and calm in high stress situations., • Demonstrate teamwork, dependability, high integrity, and a solid work ethic., • Ability to learn and adapt quickly., • Excellent computer skills including MS Office Suite.Required Skills and Qualifications, • Minimum 3 years of experience in Supervision and Customer Service to include strong leadership, negotiation, problem solving, and planning., • Experience training technicians, external customers, and 3rd party service providers., • Excellent communication, leadership, problem solving and analytical skills.

Job DescriptionRF Engineering TechnicianAbout CompanyFounded in 2015, Global Air Logistics and Training, Inc. (GALT Aerospace) a rapid innovator, solving the world's critical security challenges to enable warriors to win...decisively. GALT Aerospace subscribes to Col John Boyd's tenet "Wars are won by people, ideas and equipment, IN THAT ORDER." Warfighters need tools (equipment) that are flexible. GALT Aerospace will always satisfy the warfighter with such tools. GALT Aerospace provides simple, effective information capabilities to support all levels of war and drive information to the lowest levels possible, enabling faster decision cycles and decisive results. GALT Aerospace uniquely focuses on architecture solutions, effective open systems integration, and rapid prototyping, fielding, and operations.At GALT Aerospace, employees have incredible opportunities to work on revolutionary and nationally relevant systems. GALT Aerospace looks for people who align with its Core Values: • The Right Thing:, • We work on important things that we are passionate about and will make a difference for the US National Security., • We are ethical and forthright and expect the same from our employees., • We operate with integrity in all things; we do the RIGHT THING., • Trust and Respect:, • We always strive to earn and foster trust., • We Act and communicate with respect., • We foster mutually beneficial relationships., • Add Value:, • We take ownership of our tasks and deliver results to our customers, partners and each other., • We champion individual expertise, creativity, and accomplishments., • We recognize that collaborative teams achieve even greater results.Job LocationSan Diego, CA, Onsite. Minimal domestic travel required.Job DescriptionGALT Aerospace is seeking a full-time salaried, RF Engineering Technician. They will support the design, testing, and maintenance of radio frequency (RF) systems and components. This role requires hands-on expertise in RF measurement techniques and tools, coupled with a strong understanding of fundamental electronic principles. The ideal candidate will work closely with RF engineers to ensure the performance, reliability, and compliance of RF systems in alignment with project requirements and industry standards.Key Responsibilities:, • Perform RF testing using tools such as spectrum analyzers, network analyzers, signal generators, oscilloscopes, and power meters to evaluate system performance, signal integrity, and compliance with specifications., • Diagnose and resolve issues in RF circuits, antennas, and systems, ensuring optimal functionality and performance., • Assemble, calibrate, and test RF components, modules, and systems, including amplifiers, filters, and transceivers., • Collect, document, and analyze test data, preparing detailed reports to support engineering teams in design validation and optimization., • Configure and maintain RF test setups, ensuring proper calibration and functionality of measurement tools and equipment., • Work closely with RF engineers, design teams, and other technicians to support project milestones, including prototyping, testing, and production phases., • Maintain accurate records of test procedures, results, and equipment configurations, adhering to company standards and industry's best practices., • Ensure all work complies with safety protocols, industry standards, and regulatory requirements, including FCC and NIST guidelines where applicable.Required Skills, Experience, and Education, • Associate's degree in Electronics, Electrical Engineering Technology, or a related field, • Minimum of 3-5 years of experience as an RF technician or in a similar role involving RF systems and measurements., • U.S. Citizenship, • Ability to obtain and maintain a Department of Defense (DoD) personnel security clearance, • Proficiency with RF measurement tools (e.g., spectrum analyzers, vector network analyzers, signal generators), • Strong understanding of RF principles, including impedance matching, signal propagation, and antenna theory., • Knowledge of basic electronic principles, including circuit theory, Ohm's Law, and component functionality (resistors, capacitors, inductors, etc.), • Familiarity with RF systems such as wireless communications, radar, or satellite systems, • Experience with soldering, PCB assembly, and troubleshooting electronic circuits., • Familiarity with software tools for data analysis (e.g., MATLAB, LabVIEW) and schematic capture (e.g., Altium, OrCad) is a plus, • Strong problem-solving skills, attention to detail, and the ability to work independently or in a team environment, • Relevant certifications (e.g., IPC soldering, RF-specific training) are a plusPreferred Skills, Experience and Education, • Bachelor's degree or equivalent experience preferred., • Secret Clearance preferred, • Experience with RF simulation tools (e.g., ADS, CST, HFSS)., • Familiarity with industry standards such as MIL-STD, IEEE, or FCC regulations., • Knowledge of digital communication protocols (e.g., LTE, Wi-Fi, Bluetooth)., • Team player with a proactive attitude and the ability to be productive in a dynamic environment, • Ability to work in a collaborative environment, • Strong oral and written communications skillsPhysical Requirements, • Ability to lift and handle equipment up to 50 lbs., • Comfort working in lab environments, including standing for extended periods and handling delicate electronic components.Pay Scale At GALT Aerospace, base pay is one part of the total compensation package and is determined within a range. This provides the opportunity to progress as one grows and develops within a role. The base pay range for this role is between $70,000-$95,000. A specific candidate's base pay will depend on their skills, qualifications, experience, and location. Job Posted by ApplicantPro

Job DescriptionDuties of Position This technician performs non-routine and complex assignments involving responsibility for planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project, selects and adapts plans, techniques, designs, or layouts, contacts personnel in related activities to resolve problems and coordinate the work, reviews, analyzes, and integrates the technical work of others. Supervisor or professional engineer outlines objectives, requirements, and design approaches. Completed work is reviewed for technical adequacy and satisfaction of requirements. This incumbent may train and be assisted by lower level technicians, and performs one or a combination of the following: • Designs, develops, and constructs major units, devices, or equipment; conducts tests or experiments; analyzes results and redesigns or modifies equipment to improve performance; and reports results., • From general guidelines and specifications (e.g., size or weight requirements), develops designs for equipment without critical performance requirements that are difficult to satisfy such as engine parts, research instruments, or special purpose circuitry. Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specifications, parts lists, estimates, procedures, etc. May check and analyze drawings or equipment to determine adequacy of drawings and design., • Plans or assists in planning tests to evaluate equipment performance. Determines test requirements, equipment modification, and test procedures; conducts tests using all types of instruments; analyzes and evaluates test results, and prepares reports on findings and recommendations. Experience performing overhauls and repairs on any of the following shipboard electronics systems:, • High Frequency (HF), • Radio Frequency (RF), • High Frequency Radio Group (HFRG),, • Digital Modular Radio (DMR),, • Navy Multiband Terminal (NMT),, • Tactical Air Navigation System (TACAN),, • Electronic Support Measures (ESM), or This position requires a Secret US DoD security clearance. Preferred Skills Quality Management System (QMS) experience that is compatible with ISO 9001:2008 and 2015. Additional Notes Completion of an appropriate military “A" school and completion of at least one appropriate military “B" or "C" school may be substituted for the two year requirement; Associate’s or higher in Electronic or Electrical Engineering (EE), Computer Engineering (CE), Computer Science (CS), Technology Management (TM), Information Systems (IS), Information Resources Management (IRM), Information Technology (IT) or Physics. Remarks Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $40 - $70 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR tzufmTPrxL

Job DescriptionSalary: Hourly Range of $34.00 - $37.00 dependent on experience. United Support Services, Inc., founded in 2003, is an innovative engineering and technology business headquartered in San Diego, CA. We have an exciting new opportunity and are currently looking to add a Senior Engineering Technician (HVAC/AC&R) to our Surface Engineering Maintenance Assist Team, supporting the Naval Base San Diego, California. USS offers competitive salaries and excellent benefits! Veterans are highly encouraged to apply! This position will provide HVAC/AC&R maintenance and maintenance training, to assist shipboard personnel in the operation, maintenance and assessment of HVAC/AC&R equipment including but not limited to: Heating, cooling, air conditioning and refrigeration systems onboard U.S. Navy vessels and all facilities tasks related to work areas. Electronic Cooling/Dry Air system, and associated repairs, and to instruct Ships Force personnel to conduct functional checks and operational test of those systems/equipment onboard U.S. Navy CG, DDG and Amphib Class ships home ported or in the port in San Diego, California. Duties and Responsibilities: Required to conform to all Quality Assurance, Safety and Health procedures. Provide HVAC/AC&R engineering and technical support and training for specified U.S. Navy CG, DDG and Amphib class ships on a schedule established by the TA. Assist Ships Force in performing necessary repairs to and testing of onboard installed HVAC/AC&R equipment. Assist Ships Force with the assessment, renovation and repairs of components and equipment in accordance with technical manuals and PMS documentation as directed by the TA for identified discrepancies and assigned Automated Work Requests (AWR). Assist Ships Force in performing inspections and operation performance tests of HVAC/AC&R equipment. Provide technical assistance to correct equipment and system discrepancies, and recommendations for correction of deficiencies. Provide engineering and technical support services and assist Ships Force in diagnosing equipment problems, making repairs, and maintaining systems equipment. Assess, troubleshoot, and assist ships force with repair of all shipboard HVAC/AC&R Equipment, etc. Repair systems that utilize a variety of methods for air conditioning and heating such as mechanical compression, vapor compression, absorption, steam jet or air cycle. Develop and provide equipment/system training guides. Replace defective breaker controls, thermostats, switches, fuses, and electrical wiring to repair installed units, using electricians hand tools and test equipment. May install, repair and service air conditioning units ranging from small window units to centralized units up to 300 tons cooling capacity. Other duties as assigned. Experience/Qualifications: 12 years of experience with either shipboard marine HVAC or skilled facilities technician trades experience with related Air Conditioning & Refrigeration maintenance and repair experience. Must posses a Universal EPA Certification. Must be certified to handle, retrieve and recharge refrigerant (EPA Section 608 Certification). Must be able to read and interpret equipment and systems ship drawings and ship technical documents and manuals. Must be able to obtain and maintain a Department of Defense confidential security clearance and base access. Must be able to lift, carry and transport heavy equipment and boxes, no less than 30lbs. Must be able to work on and climb ladders. Be able to work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as assigned which may involve high heat, humidity, noise, and dirty conditions as well as working aloft or over the sides of vessels. May require wearing a respirator. Valid drivers license Preferred Qualifications: Understanding of ship electrical power, heating, air conditioning, refrigeration and isolation, hot work, confined spaces work, and fire-watches (Fire Safety Watch requirements). Understanding of industrial U.S. Navy ship repair activities, as well as ship layout, configuration, control plates, placards, markings, and symbols. Preferred maintenance experience with systems. ADA Notations Ability to traverse narrow passageways, ladders/stairs, and confined spaces. Requires walking, reaching, sitting and concentration in the presence of occasional noise. Able to lift, carry and move objects up to 50 lbs. in weight. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Life insurance Paid time off Vision insurance Job Type: Full-time, Non-Exempt Salary: The hourly pay range for this position is: $34.00 - $37.00 dependent on experience. United Support Services, Inc. is proud to be an Equal Employment Opportunity and affirmative action employer.

Epsilon Systems Solutions is seeking a full time Electrician (propulsion plant) Subject Matter Expert II in San Diego, CA. Duties and Responsibilities: \n • Provide engineering technical support for electrical components and equipment, electrical/electronic control, detection, alarm sensing, indicating, and monitoring systems and equipment associated with main and auxiliary steam, feed and condensate, condensers, valves, distilling plant, main machinery space support systems propulsion support systems, fuel and lube oil purifiers, fuel oil systems, main propulsion lube oil systems and associated support, valves, Main Reduction Gears (MRG) , attached lube oil and CPP pumps, propulsion shafting, stern tube seals, stern tube and line shaft bearings, bulkhead seals and associated systems, and propeller blades.\n, • Provide electrical technician support for urgent mission degrading CASREPs or other system and component problems affecting propulsion plant systems.\n, • Provide Ship's Force training on electrical troubleshooting techniques to identify and correct equipment failures.\n, • Provide assistance, training and technical subject matter expertise in electrical systems and subsystems maintenance and repairs to ships' force military personnel during FTA, TSRA, INSURV, TMI assessments, and CMO events.\n, • Complete assessment or Technical Assist, and provide repair recommendations to the branch head in a Report or TAVR format as required for review and issuance on the equipment.\n, • Conduct ship visits to provide technical guidance for repairs, troubleshooting or testing as requested for urgent or routine requests.\n, • Review the adequacy of the onboard ILS, PMS, PQS and validate the current equipment configuration.\n, • Communicate with and conduct a debrief of cognizant Ships Force personnel reporting conditions found, repairs completed and/or required and training conducted with current operational condition. Any unresolved conditions must be briefed to the ship's Commanding Officer and Chief Engineer with corrections required.\n, • Submit a Ship Visit Report to include the assessment of the material condition and operational status, following the standard report format used by the Branch.\n, • High School Diploma or equivalent\n, • Minimum 6 (six) years' experience with U.S. Navy shipboard electrical systems maintenance and repair\n\n, • Ability to obtain/maintain a DoD Secret Security Clearance\n Pay Range: The pay range for this role is $26.07 To $32.30 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations: \n • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • May ride ships at sea for extended periods\n, • Travel may be required within and outside of the continental United States\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems Solutions is seeking a full time Electrician (propulsion plant) Subject Matter Expert II in San Diego, CA. Duties and Responsibilities: \n • Provide engineering technical support for electrical components and equipment, electrical/electronic control, detection, alarm sensing, indicating, and monitoring systems and equipment associated with main and auxiliary steam, feed and condensate, condensers, valves, distilling plant, main machinery space support systems propulsion support systems, fuel and lube oil purifiers, fuel oil systems, main propulsion lube oil systems and associated support, valves, Main Reduction Gears (MRG) , attached lube oil and CPP pumps, propulsion shafting, stern tube seals, stern tube and line shaft bearings, bulkhead seals and associated systems, and propeller blades.\n, • Provide electrical technician support for urgent mission degrading CASREPs or other system and component problems affecting propulsion plant systems.\n, • Provide Ship's Force training on electrical troubleshooting techniques to identify and correct equipment failures.\n, • Provide assistance, training and technical subject matter expertise in electrical systems and subsystems maintenance and repairs to ships' force military personnel during FTA, TSRA, INSURV, TMI assessments, and CMO events.\n, • Complete assessment or Technical Assist, and provide repair recommendations to the branch head in a Report or TAVR format as required for review and issuance on the equipment.\n, • Conduct ship visits to provide technical guidance for repairs, troubleshooting or testing as requested for urgent or routine requests.\n, • Review the adequacy of the onboard ILS, PMS, PQS and validate the current equipment configuration.\n, • Communicate with and conduct a debrief of cognizant Ships Force personnel reporting conditions found, repairs completed and/or required and training conducted with current operational condition. Any unresolved conditions must be briefed to the ship's Commanding Officer and Chief Engineer with corrections required.\n, • Submit a Ship Visit Report to include the assessment of the material condition and operational status, following the standard report format used by the Branch.\n, • High School Diploma or equivalent\n, • Minimum 6 (six) years' experience with U.S. Navy shipboard electrical systems maintenance and repair\n\n, • Ability to obtain/maintain a DoD Secret Security Clearance\n Pay Range: The pay range for this role is $26.07 To $32.30 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations: \n • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • May ride ships at sea for extended periods\n, • Travel may be required within and outside of the continental United States\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Amentum is actively seeking a Marine Diesel Mechanic with expertise in small craft and shipboard propulsion and auxiliary systems. This position is ideally suited for individuals with Engineering Department experience, proficient in Marine Propulsion, Electrical, Auxiliary, and control systems. Work is performed at a Navy Training Command located at Naval Amphibious (NAB) Coronado, CA. Responsibilities: • Conduct preventive and corrective maintenance, • Operate and control casualties of propulsion systems in-port and underway on small navy watercraft, • Execute pre-start and post-operation checks, • Adhere to Amentum's Ethics Program, Workplace Environment, and Occupational Safety standards, • Maintain cleanliness of assigned work areas or craft\n Minimum Qualifications: • Must be able to obtain and maintain U.S. Naval Base security access clearance. Note: US Citizenship is required for facility credentials/authorization at this work location, • Six (6) years of experience as a Navy Engineman/Navy Construction Mechanic/Navy Electrician's Mate OR equivalent civilian experience, • Experience as a Navy Engineman/Navy Construction Mechanic/Navy Electrician's Mate OR equivalent civilian experience, • Qualified as a Navy Second Class Swimmer or equivalent, • Availability to work alternate schedules as required by training needs, • Willingness to work occasional overtime, • Ability to work in both indoor and outdoor environments and conditions\n Preferred Qualifications: • Prior experience as a Navy Engineman, Electrician or Electronics Technician with Improved Navy Lighterage System (INLS), Maritime Prepositioning Force Utility Boat (MPFUB), Lighter Amphibious Resupply Cargo (LARC), Combat Rubber Raiding Craft (CRRC) or Amphibious Bulk Liquid Transfer System (ABLTS), • Familiarity with CAT C18 & C4.4, John Deere 6081, Cummins QSM-11, Evinrude Outboard Engines, Hamilton and Wartsila Waterjets, hydraulic and electrical systems, • Experience with 460 and 115 Vac distribution systems, 24 Vdc, diesel engine electronic control systems and programmable logic controllers, • Experience performing preventive and corrective maintenance and preservation of Navy small craft\n Service Contract Act (SCA) Compensation & Benefits: • This is an hourly, overtime-eligible position that falls under the Service Contract Act (SCA). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act. The amount you are entitled to receive will vary depending upon the fringe benefits you select now and in the future.\n Compensation & Benefits: Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

General Atomics (GA), and its affiliated companies, is one of the world's leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies. We currently have an exciting opportunity within our corporate Facilities group as Industrial Mechanic - CNC Technician, based in the San Diego, California region. As a skilled specialist, this position is responsible for servicing, troubleshooting, modifying, rebuilding, and repairing manufacturing equipment to include but not limited to CNC machines, mills, laths, autoclave, ovens, compressed air systems, dust collectors and other facilities and manufacturing equipment. Requires the ability to read and understand manufacturer's operation and maintenance manuals, and safety regulations. Performs periodic inspection to locate and determine cause of equipment malfunction. DUTIES AND RESPONSIBILITIES • Under minimal supervision this position is responsible for assisting in servicing, troubleshooting, and repairing multi-axis CNC machines, saws, grinders, mills, lathes, robotics, hydraulic systems, compressed air system, process chillers and associated equipment., • Starts and operates CNC machines and systems to test their performance., • Identifies required tools and special equipment required for the job., • Reads and interprets engineering drawings, electrical and electronic schematics, engineering flow diagrams, motion and industrial controls, and performs algebra, geometry basic shop math., • Operates, maintains and troubleshoots Programmable Logic Controllers (PLC)., • Utilizes machine troubleshooting equipment: digital multi-meters, amp probes, dial indicators, depth gauges, micrometers and Vernier caliper., • Maintains inventory of essential spare parts and re-ordering when necessary., • Ensure all installations, repairs and maintenance meet environmental protection requirements., • Removes and disposes of oils, cutting fluids, and other hazmat materials., • Assists with arc and oxyfuel welding, rigging, moving, setup and leveling of machines., • May respond to machine shop CNC emergency calls., • Utilizes MS Office Suite, SAP, and other applications., • Maintains strict confidentiality of sensitive information., • Performs other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Job Qualifications:• Typically requires a two-year technical degree, trade school equivalent, military class C school or Military Occupation Specialty (MOS), and seven or more years of progressive experience as a journeyman CNC mechanic and production equipment repair technician. Equivalent professional experience may be substituted in lieu of education. • Advanced working knowledge of electronics systems with ladder logic and Programmable Logic Controllers (PLC)., • Advanced working knowledge of all electrical equipment and systems up to 480 volts 3 phase, industrial plant electrical wiring and code requirements., • Must demonstrate knowledge of CNC maintenance practices and regulations as well as safety codes., • Must have complete and detailed knowledge of applicable federal, state and local safety codes and be able to read, interpret and explain schematics and mechanical drawings., • Must have a working knowledge of and discretion in safely operating hand and power tools, machine tools, and electrical measuring instruments., • Must be able to work overtime hours and different work shifts as required, including staggered work shifts Friday-Tuesday 6:00am-2:30pm or Monday-Friday 2:30pm - 10:30pm, if required., • US citizenship is required. Salary:$65,410 - $99,888

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near San Diego, California. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the San Diego, California areas. Core Responsibilities • Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment., • Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules., • Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment., • Testing/troubleshooting installed Solar equipment and ensuring proper working order., • Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA)., • Able work in a solo as well as a group environment. Core Experience • 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred., • Preventative maintenance experience on Solar Utility equipment is preferred., • Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills., • Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred., • Takes initiative to escalate issues at site., • Ability to train, mentor, and develop laborers into Apprentices. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Must live within approximately 50 miles of the San Diego, California areas., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$25—$42 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job DescriptionDo You Want to Improve the Future of Healthcare? • Want to enable the world's top scientist to deliver impactful healthcare solutions faster?, • Do you believe that the best team wins?, • Do you thrive on providing innovative solutions to unique challenges? Onsite Role Position Summary: The Automation Technician will assemble automation work cells and work on customer engineering projects. This position will assist in shipping and receiving components for projects and the automation engineers with the operational testing of instrumentation on the projects. Responsibilities: • Assemble automation workcells and custom engineering projects., • Configure electrical, pneumatic, and communications on automation workcells and custom engineering projects based on design schematics., • Label and organize all workcell wiring., • Unpack, arrange, level, and secure automation workcell tables., • Mount instrumentation and shelves to workcells., • Assist Shipping/Receiving to keep components organized and the shop clean., • Assist engineering team with operational testing on instrumentation., • High School Diploma., • Relevant trade-skill school degree desirable., • At least 1-2 years of experience with hand-tools (drills, saws, wrenches, etc), including cutting, drilling, and tapping aluminum or similar., • Experience working with extruded aluminum profile (such as 80/20) is preferred., • Excellent attention to detail and drive for quality., • Ability to read Engineering drawings., • Able to use electric and pneumatic tools., • Basic computer skills are required, including Microsoft Word and Excel., • Ability to operate a forklift is desired, Total Compensation target is $24.00 - $27.00 an hour; actual pay will vary based on experience. Benefits include 401K with company match, Flexible Vacation Policy, Health Benefits, Investment in Professional and Personal Development, and much more. Biosero provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws. In addition, Biosero complies with applicable state and local laws governing nondiscrimination in employment in every location in which it has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Biosero is committed to diversity and inclusion. We seek individuals from all backgrounds and appreciate and celebrate the diversity of our growing team. Powered by JazzHR ddwzwRd0sf

Job Description Job Description: * Follow documentation thoroughly to build Electronic and Mechanical tabletop and standalone systems/assemblies * Build sub-assemblies, add subassemblies to other builds and or full builds from the beginning to completion for technical review. * Optical alignment/calibration and basic mechanical and electrical troubleshooting. * You will perform these tasks in support of multiple product lines, each with options and upgrades, some of which are implemented by hardware changes while others are changed by manipulating controls in our proprietary software. * Final test of assembly and certification, providing written suggestions for improved documentation, and documenting troubleshooting steps as they occur Assemblers will work with Technicians on their projects as a team. * Technicians assist with Assemblers with Tech reviews and final test computer sign off on the Assemblers projects * Must be able to work with others and on their own with projects assigned to them, also able to be trained and follow directions. * Be on time, ready to work every single day, and be part of a talented team with room to grow as an assembler. * Troubleshoot mechanical, electrical, and optical assemblies that do not meet testing criteria * Contribute to a documented troubleshooting guide * Build and test mechanical, optical, and electronic assemblies * Perform routine inventory control and component inspection * Collaborate with engineering to resolve problems with components and procedures * Participate in the continuous improvement of assembly documentation * Keep a clean work environment at their work area * Reporting issues, explain in detail the issue and work on problem solving the situation * Will be working with assemble team- team player able to shift gears quickly when asked due to production needs and priorities Qualifications: * Minimum 3 or more years of manufacturing-related experience as an assembler or equivalent combination of experience and education. * 5+ years of manufacturing-related experience preferred, ideally with optics and electro-optics * Experience in a manufacturing environment as an assembler working technician and Engineers * Ability to work under frequently changing priorities and deadlines, while keeping a keen awareness of the impact on other areas of the organization * Knowledge of ESD practices at all times * Demonstrated high attention to detail - perfectionists are encouraged to apply! * Ability to read and follow assembly documents in their entirety * Leadership experience * Familiarity with hand and machine tools * Experience with power tools and machining equipment * Experience with electronic test equipment * Ability to solder and work with electronic assemblies * Ability to work with crimp tools, wires, and cable assemblies * Ability to read and follow assembly documents in their entirety * Attention to detail with your projects * Great Attendance throughout the year. * Prior experience with manufacturing assembly. - At least 3 years experience would be nice if had 5 to 6 years of experience. * Strong computer skills-Intermediate to Advanced. Able to navigate though emails, open files, move items to folders. Familiar with Novia * Team player and Reliable * Needs to have ESD experience and PCB experience * Willing/eager to learn and have * Strong communication skills written and verbal California Fair Chance Act: Synectics Inc. will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Synectics Inc. is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Benefits: Healthcare Insurance: Synectics offers eligible employees and their dependents healthcare coverage through BlueCross BlueShield of Illinois. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Premiums are subsidized by Synectics. Dental Insurance: Synectics offers eligible employees and their dependents a dental plan through MetLife. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Vision Insurance: Synectics offers eligible employees vision insurance through VSP. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics.401(k) Plan: The Synectics Inc. Investment Savings Retirement Plan. Synectics offers all employees who are 21 years of age or older the opportunity to invest in the 401(k) Plan on the first enrollment date that is at least 30 days after employment begins. Enrollment dates are each January 1st, April 1st, July 1st, and October 1st. Technical Certification Bonus: Synectics is pleased to award its employees a bonus of up to $500 for an approved professional certification. In determining the bonus amount, Synectics will consider the cost of the test(s) for any certification relating to your current position, achieved during your employment with us. Only one Certification Bonus per calendar year may be awarded per employee. Only current, active employees will be eligible to receive this bonus. It will be awarded 90 days after the Synectics office has received documentation confirming the successful completion of the certification. Synectics is an equal opportunity employer.

Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, waveguides or fiber optic cable onboard Navy vessels. Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more co

Floating Maintenance Technician I. OPPORTUNITY: FLOATING MAINTENANCE TECHNICIAN I - SAN DIEGO, CA. Must have 1+ years of experience in all trades (electrical, plumbing, drywall, paint, appliances, etc.

Facilitate the weekly LBC Kanban review meetings where new LBCs are discussed and estimated with Product Management (PM), Program Management (PgM), Engineering and PMO. Educate, assist and train Account Managers (AMs), PMs, PgMs and Engineering how to create compelling LBCs to obtain executive appro

Generate electrical controls and embedded systems architecture solutions for new project needs, perform engineering analyses for systems and circuits, document findings, communicate results to engineering and program management staff, give technical presentations, and manage technical effort schedul

Qualification: ME / MTech/MS/BE - Mechanical Engineering. Engineering responsibility for component and sub-assembly test development, data acquisition, analysis, and reporting.

Bachelors degree in Mechanical Engineering, Construction Management, Civil, Industrial, or Structural Engineering, or 5+ years industry experience as a Construction Project Engineer.

The role will entail managing engineering projects, directing designers & other disciplines, as well as personally performing engineering activities. Coordinate work activities that affect the quality of project control, scope development, proposals, engineering & design, document control, inspectio

Currently pursuing a Bachelors degree in mechanical engineering or other related engineering field. You will work directly with internal engineering, operations, data, and product teams to help maximize our customers utility from our products and services. Support system level design considerations

Oneida Nation of Wisconsin that delivers customer-focused engineering, science, and construction services worldwide. Oneida Engineering Solutions (OES).

A Master's degree in Civil Engineering, or a related engineering discipline. Bachelors Degree in civil, chemical, environmental, or mechanical engineering. At least 10 years of experience in relevant water/wastewater industry and process engineering, including drinking water and reuse systems.

A Life Science company based in San Diego, CA is seeking a Principal Technical Project Manager to join their team.Leads cross-functional teams to address business systems needs/issues.Plans and directs the analysis of complex business problems to be solved with automated systems.Provides technical l

Bachelors degree in civil or mechanical engineering, related field or equivalent experience. Management, Consulting, and Engineering. Oil and Gas, Utilities, and Appliances, Electrical, and Electronics Manufacturing.

A major insurance client is seeking a Senior IT Project Manager to join an IT communications/collaborations group.This individual will be focusing on platforms like SharePoint and telephony solutions, and providing project management services for infrastructure and security teams.The PM will support

Permanent Supportive Housing Programs.Alpha Project offers a generous benefits package, including 14 paid holidays, paid vacation, sick leave, and 100% employer-paid medical, dental, vision premiums, and group life insurance.Under the direct supervision of the Program Manager, the Case Manager will

Posted Thursday, April 3, 2025 at 10:00 AM | Expired Thursday, May 15, 2025 at 9:59 AM.Under the direct supervision of the Senior Manager of the Enterprise Project Management Office (ePMO), the Project Manager will be responsible for managing activities related to departmental and/or organizational

Bachelor’s Degree in Civil, Environmental, or related Engineering from an ABET accredited university or equivalent. Excellent technical writing skills for use in development of master plans, studies, engineering reports, and related technical documents.

General Summary Provides budget analysis, resource allocation and coordination of project activities that may be across functional areas within the organization.Assigns and monitors work of technical personnel, ensuring that project steps are in alignment with business objectives, on-time and within

Bachelor's Degree in Business Administration, Management, Engineering, related field or equivalent training and/or experience. Advanced demonstrable knowledge of, and experience with, the interpretation and application of engineering principles, Overhead, Underground and Gas Standards, Design Manual

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. Engineering or Construction Management degree or equivalent experience.

The ideal candidate will have experience managing Salesforce implementations within fast-paced, operations-driven industries such as construction, engineering, or field services.

If you are a collaborative Project Manager & Business Analyst who can translate business requirements into stories and deliver solutions, please consider joining WD-40 Company.Identify the need for solutions and assist stakeholders with cost-benefit analysis.Facilitate recurring stakeholder meetings

Dokken Engineering delivers innovative engineering solutions for water resources projects throughout the state of California. Lead preparation of engineering analyses for potable water, sewer, recycled water, drainage, flood control, and agricultural irrigation systems. Train Associate, Assistant, a

A division of Publicis Groupe, Publicis Digital Experience is a network of top-tier agencies designed to develop capabilities and solutions to enable growth and provide scaled access to the digital capabilities of Publicis Groupe in service of our clients.Together, the Publicis Digital Experience po

Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. Education High School

Bachelor's Degree in chemical, civil, environmental, mechanical engineering, or related field.

Leads projects and participates on cross-functional teams to address business systems needs/issues.Plans and develops the analysis of complex business problems to be solved with automated systems.Provides technical assistance in identifying and evaluating systems and procedures that are cost[1]effec

To be acceptable, the program must: (1) lead to a bachelors degree (or higher) in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses in five of seven areas of engineering science or physics as detailed in the provided t

An insurance company based in Carmel Mountain Valley is seeking a Workday Project Manager consultant to guide them through their full lifecycle Workday Financials Implementation, which has a phase 1 Go Live date of May 2025.The company is already in the processes of implementing Workday HCM, and has