Electrical training jobs in Los Angeles, California - Page 8Crear alertas

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. Hermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighterResponsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Senior Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an Avionics Electrical Engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 5+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness designPreferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Strong analysis and troubleshooting skills, • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experience Additional Requirements: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About Mynaric USA With offices in Munich, Germany and Hawthorne, California, Mynaric produces optical fiber for the skies and, as a pioneer in laser communications, enables extremely fast and secure wireless data transmission between satellites, aircraft, drones, and the ground. The products are used by well-known international technology companies to build global communication networks. The emerging Internet over the clouds will connect the un- or under-connected 3 billion people, bring the Internet of Things to the most remote corners of the earth and make international communication more secure than ever. Position Summary We are looking for a skilled, creative, and driven manufacturing engineer to drive our communication systems from initial concept development to full-scale production. The position will own the relationship between the engineering development, supply chain, production, and test teams. The role measures its success based on quality, reliability, cost, manufacturability, throughput, and the ability to achieve deliveries within expected timelines. Job Type: Salaried, Full-time Essential Duties and Responsibilities: • Develop, evaluate, and optimize electronics manufacturing processes, including PCBA, electromechanical assembly, test, and final system integration., • Develop, implement, maintain, and improve current manufacturing processes, including equipment, documentation, training, gages and tooling/fixtures, to optimize quality, productivity and cost performance., • Design and maintain manufacturing processes, tooling, fixtures, gages, and documentation to ensure quality, productivity, and cost efficiency., • Create and maintain detailed work instructions, standard operating procedures (SOPs), and training materials to ensure consistency, quality, and repeatability on the production floor., • Troubleshoot manufacturing issues and implement corrective actions quickly using data-driven analysis., • Support development of assembly, functional test, and automation solutions to support scaling production., • Design and implement assembly, test and automation processes and tooling that supports volume manufacturing with a quality assurance mindset., • Contribute to continuous improvement initiatives, helping the team iterate quickly and efficiently., • Take on diverse tasks as needed to support the growth and success of the company. Education and/or Experience • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or related field, or equivalent hands-on experience., • Minimum of 3 years of experience in electronics manufacturing, including PCBA, SMT, and electromechanical assembly., • Experience with electronics manufacturing processes, including PCBA, SMT, and electromechanical assembly., • Proven ability to develop, implement, and optimize manufacturing processes for prototypes and small-to-medium volume production., • Experience creating work instructions, SOPs, and process documentation., • Hands-on experience with assembly, test, and automation equipment preferred., • Comfortable working in a fast-paced, startup environment, adapting to changing priorities, and wearing multiple hats., • Experience monitoring, tracking and continually improving total cost progress., • Experience with applying lean manufacturing principles, efficiency methods preferred., • Ability to read mechanical and electrical schematics, blueprints., • Schematics: engineering drawings, circuit layouts, and parts list, • Cable Harnesses: wiring diagrams, layout drawings, and parts list., • Mechanical Assemblies: mechanical drawings and parts lists., • Must be willing and able to work overtime and weekends as needed, with minimal notification., • Demonstrated experience and ability to read, interpret and follow:, • Ability to effectively communicate (verbal and written) with Engineering and Production., • Able to adapt to constantly changing work assignments and fast paced work environment., • Prolong sitting or standing for long periods of time, bending, grasping, sitting, pulling, pushing, and crouching., • Must be willing to work extended hours and weekends as needed., • Must be able to lift a minimum of 25 lbs. unassisted., • Medical, Dental, Vision, • Flexible Spending Account (FSA), • Disability Insurance/ Basic Life Insurance, • 401(k) with matching, • Paid Time Off, • Gym Pass, • A dynamic work environment

Job DescriptionDescriptionAs a PCBA Technician, you will perform a wide range of spacecraft assembly, rework, and diagnostic tasks to support the development and production of high-reliability avionics and flight hardware. You will work closely with electrical engineering, manufacturing, and test teams to ensure the highest levels of workmanship, quality and mission readiness. Responsibilities • Read and interpret schematics, PCB layer stacks, BOMs, ECOs, and assembly drawings with high accuracy., • Perform high-quality soldering and SMT assembly/rework on a wide range of componentsizes and package types, including fine-pitch and high-density devices., • Assemble, modify, and repair PCBAs according to engineering instructions, including component replacements, wiring updates, and mechanical integration steps., • Conduct visual inspections and basic electrical checks to verify workmanship quality and identify assembly defects., • Operate and maintain standard electronics lab equipment, including microscopes, soldering stations, reflow tools, multimeters, and oscilloscopes., • Perform underfill, conformal coating, staking, and potting per spacecraft environmental requirements., • Follow strict ESD, FOD, and cleanroom protocols during all manufacturing evolutions., • 5+ years of hands-on experience in PCBA assembly, rework, or electronics technician roles., • Familiarity with IPC-A-610 or IPC-7711/7721 workmanship standards (formal certification is a plus), • Proficiency in soldering and rework of SMT and through-hole components, including fine-pitch packages., • Strong ability to read and interpret electrical schematics, assembly drawings, and PCB documentation., • Demonstrated experience performing component replacements, wire mods, jumpers, and board-level repairs., • Experience working with underfilling, conformal coating, staking, or potting materials., • Ability to follow detailed engineering instructions, work orders, and ECO-drive modifications., • Strong attention to detail and commitment to high-reliability workmanship., • Ability to work and collaborate effectively in a team-first environment, supporting cross-functional engineering, manufacturing, and test groups., • Prior experience working on aerospace, spaceflight, defense, or other high-reliability electronic systems., • IPC-A-610 or IPC-7711/7721 certification, or equivalent industry-recognized training., • Experience supporting prototype hardware builds, first-article assemblies, or rapid-turn engineering modifications., • Working knowledge of cable and harness fabrication. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description POSITION SUMMARY: Engaged in variety of electrical test on magnetic parts, subassemblies, final verification of electrical requirements, and to ensure unit functions in accordance to drawing electrical specifications or to determine cause of unit failure. POSITION RESPONSIBILITIES: • Review manufacturing traveler instructions for electrical requirement., • Test single and three phase transformers and inductors in accordance with test specifications., • Ensure that all electrical measuring equipment such as digital voltmeter, frequency meter, Inductance Bridge, digital ohmmeter, auto-multiple tester, etc. are calibrated., • Ensure that each part conforms to drawing electrical requirements., • Perform pre-pot electrical verification prior to encapsulation parts., • Perform quality conformance inspection for all completed parts to verify conformance to specification., • Initiate a non-conformance report each time a part is found non-conformance to the requirement., • Maintain and clean areas around test equipment., • Lead daily testing of transformers and controls., • Ensure ongoing adherence to internal and external standards., • Troubleshoot and diagnose problems., • Utilize PC and necessary hand calculations to prepare files and forms for transformer test and draft Certified Test Reports., • Prepare detailed test plans for scheduled transformers based on input from the customer specification, test specification, nameplate, control drawings, standards, equipment instruction manuals and work instructions., • Interface with engineering as necessary for clarifications or to obtain additional information. Represent the test department in a professional manner., • Maintain & Repair test equipment as necessary. Ensure equipment is calibrated and schedule upcoming calibrations. Monitor condition of test equipment and test fixtures., • Recognize opportunities for improvement and take action., • Ensure engineering changes are acted upon as required and communicate non-conformances via quality assurance department., • Provide work leadership and train test technicians. Teach equipment setup, connections, principles of operation, maintenance, and diagnostics. This position has no supervisory responsibilities. MINIMUM REQUIREMENTS: High school diploma or general education degree (GED) six months of related experience or training or an equivalent combination of education and experience. • Must have the basic knowledge of transformer construction, testing and troubleshooting, • Must have the basic knowledge how to use various type of test equipment such digital multi-meter, ohmmeter, volt meter, wattmeters, megohmmeter, oscillators and power amplifiers., • Must be able to perform each essential duty satisfactorily., • Must have the mental and visual ability to read and interpret documents such as work instructions, schematic diagram, safety rules, operating and maintenance instructions and procedures manuals., • Must have the knowledge of basic electricity both alternating and direct current., • Must have the mental ability to perform basic mathematic., • Must have the physical ability to move parts weighing 25 pounds., • Ability to communicate effectively, work effectively in a team environment., • Ability to apply common sense understanding to carry out instructions furnished in written or oral This position is in contact with supervisor, production manager, and human resources. PHYSICAL EFFORT: This position may occasionally be required to lift up to 25 pounds. Must be able to remain in a stationary position 50%. Position needs to move about around the test area, and throughout production plant. The person in this position frequently communicates with Supervisor and production manager who have inquiries; therefore person must be able to exchange accurate information in these situations. The person will require the ability to read materials including safety policies and procedures. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. SAFETY: • Must have the physical ability to perform this job safely without endangering the health or safety of self or others., • Employees are required to wear Personal Protective Equipment (PPE) such as clothing, gloves, goggles, or other garments or equipment to protect the employee’s body from injury or infection., • Determines appropriate action beyond guidelines; Reports potentially unsafe conditions of equipment., • Ensure compliance with Magnetika employee health and wellbeing programs., • Inspect equipment, manufacturing area and safety equipment to find and correct potential hazards., • Ensure compliance with environmental and Occupational Safety and Health Administration (OSHA) regulations. Works throughout the premises as needed. Work environment may have noise levels ranging from medium to quiet. The environment for this position varies from clean, climate controlled to manufacturing. This job description portrays in general terms the type and level(s) of work performed and is not intended to be all-inclusive or to represent specific duties of any one incumbent. The knowledge, skills and abilities may be acquired through a combination of formal schooling, self-education, prior experience, or on-the-job training. The company reserves the rights to modify, supplement, delete, or augment the duties and responsibilities specified in the position description, in the company’s sole and absolute discretion. Duties other than those expressly specified may be assigned from time to time. Monday - Thursday 7:00 am - 3:30 pm, Friday 6:00 am - 2:30 pm

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. MANUFACTURING Rocket Lab's Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers. LEAD MANUFACTURING ENGINEER - AVIONICS Based out of Rocket Lab's Headquarters in Long Beach, CA the Lead Manufacturing Engineer - Avionics is responsible for process development, implementation and sustainment of Avionics Components and Assemblies used across all programs. You will support the Manufacturing Engineering Manager for Avionics and Space Systems, Production, and Design organizations, with deliverables required for internal leadership, board of directors, and investors. WHAT YOU'LL GET TO DO: • Coach, mentor and develop engineers to achieve new heights in their careers., • Perform weekly, quarterly and yearly reviews with their direct employees, • Interview and hire candidates to fill new roles, • Create team goals and metrics to drive continuous improvement projects, • Lead/organize meetings as necessary to drive project completion, • Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc., • Oversee introduction and implementation of new products and product revisions, • Perform initial Value Stream Mapping Exercises, Method of Manufacture plans, cell design, etc., • Define and implement Factory layouts, Equipment selection, FAT, SAT, and production commissioning, • Capital and facilities justification, project management and implementation, • Lead problem containment and structured root cause & corrective action investigations, • Lead the continuous improvement process in your area using lean tools and techniques such as 5S YOU'LL BRING THESE QUALIFICATIONS: • Bachelor Degree in Engineering (Preferably Electrical, Aerospace, Manufacturing, or Mechanical), • 5+ years of experience in a manufacturing environment., • Personnel leadership experience, • Strong working knowledge of EEE piece parts, PCB, PCBA, electromechanical assembly, tooling, test, and quality techniques, • Extensive experience using fundamentals of electronic circuits, design principles, and manufacturing techniques to solve component issues in a fast-paced environment THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Advanced engineering degree (Preferably Electrical, Aerospace, Manufacturing, or Mechanical), • 8+ years of experience in a manufacturing environment., • Working experience with environmental acceptance/production acceptance testing, such as vibration, shock, thermal, and vacuum, • Understanding of instrumentation, interfaces, and sensors including power supplies, oscilloscopes, serial devices, switch topologies, accelerometers, thermocouples, RTDs, and 4-20mA sensors, • Experience with designing, implementing, and supporting a production line and/or build area, • Experience transitioning products from design to production as a part of cross-functional team in a fast-paced, iterative design environment, • Demonstrated experience with DFMEA, PFMEA methodologies, Fault Tree Analysis, Pareto analysis, root cause and corrective action ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise., • Availability to work long hours and weekends as needed based on test and launch schedules Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$115,000—$155,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionAbout Terawatt Infrastructure The once in a century transition to autonomous and electric vehicles is underway and will require a multi-trillion-dollar investment in energy and charging infrastructure, and the real estate to site it on. Terawatt is the leader in delivering large scale, turnkey charging solutions for companies rapidly deploying AV and EV fleets. Whether it’s an urban mobility hub, or a carefully located multi-fleet hub for semi-trucks, Terawatt brings the talent, capabilities, and capital to create reliable, cost-effective solutions for customers on the leading edge of the transition to the next generation of transport. With a growing portfolio of sites across the US in urban hubs and along key logistics and transportation corridors and logistics hubs, Terawatt is building the permanent transportation and logistics infrastructure of tomorrow through a robust combination of capital, real estate, development, and site operations solutions. The company develops, finances, owns, and operates charging solutions that take the cost and complexity out of electrifying fleets. At Terawatt, we execute humbly and with urgency to provide tailored solutions for fleets that delight our clients and support the transition of transportation. Role Description Terawatt is creating a new asset class of EV charging infrastructure to support the rapidly growing fleet EV market. Working on the forefront of electrification, the Senior Field Engineer will play a critical role in developing an industry leading maintenance and service program for Terawatt customers. The key function of the Senior Field Engineer will be to maintain, troubleshoot and repair all electrical infrastructure equipment from the incoming utility switchboard to the EVSE that provides a mission critical fuel source to our customers. You will develop a robust maintenance program that will directly impact our mission of 97% EVSE uptime. The Senior Field Engineer will work in close collaboration with our internal Engineering, Operations, and Project Development teams. In this nascent market, our customers’ needs and the available technology are rapidly evolving, requiring a responsive and dynamic set of operations and service offerings. In many cases, customers will be engaging with a charging product for the first time and you will be responsible for defining their experience. You will be able to drive impact by enabling customers to operate their electric fleets more easily, helping their companies transition to low-emission transport.Core Responsibilities • Perform advanced OEM testing, troubleshooting, repairs, and upgrades on a wide range of electrical equipment on Electric Vehicle infrastructure and facilities., • Conduct detailed performance testing, including insulation resistance (megger) testing, thermal imaging, torque verification, and overall system evaluations to ensure optimal equipment reliability., • Diagnose and resolve complex electrical and mechanical issues, including ground faults and system performance anomalies., • Lead preventive and corrective maintenance activities, ensuring all site equipment operates safely and efficiently., • Collaborate with the planning and scheduling team to maintain adherence to maintenance schedules and ensure timely, accurate completion of work orders., • Review and interpret site manuals, technical drawings, and schematics to support effective service, troubleshooting, and maintenance operations., • Accurately document all field activities, maintenance actions, and system findings in the work order system, ensuring timely reporting and follow-up with stakeholders., • Provide expert-level service support across installation, commissioning, upgrades, retrofits, replacements, and end-of-life activities., • Build and maintain strong customer relationships by delivering high-quality service, understanding customer needs, and ensuring satisfaction throughout the project lifecycle., • Identify potential equipment failures, implement proactive corrective actions, and provide recommendations to prevent future recurrence., • Communicate insights and suggestions for product, process, and quality improvements to internal teams to drive continuous operational excellence., • Coordinate and ensure the availability of all required materials, tools, and parts to support service and maintenance activities., • Uphold company safety standards by applying safe work practices, maintaining environmental responsibility, and reporting unsafe conditions or incidents., • Maintain all required safety certifications, training, and continuing education necessary to remain current with industry standards and company requirements., • Support business development efforts by identifying and communicating potential service or sales opportunities encountered in the field.Required Qualifications, • High school diploma or equivalent, • Minimum 5 years maintenance or electrical experience, • Must have and maintain a valid driver’s license and a safe and acceptable driving record according to company policy, • Knowledge of NFPA & the NEC, • Strong computer skills. Comfort with Microsoft, Google, CMS, and other cloud-based computing programs, • Ability to communicate and function well in a mobile office setting, • Must be reliable, have good initiative, committed, and quality focusedPreferred Qualifications, • Active journeyman license, • Bachelor’s degree, • SCADA experience is a plus, • Strong mechanical background

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SYSTEMS ENGINEER I/II We are currently seeking a Systems Engineer I/II for our systems engineering team based out of Long Beach, CA. These teams support our Space Systems division, and lead cutting-edge programs for civil, commercial, and defense customers. Systems engineers are responsible for the development and maintenance of technical budgets, requirements definition, test planning and execution, and overall management of the systems engineering process. They also work hands-on with flight hardware, and drive the technical development of our Space Systems missions. WHAT YOU'LL GET TO DO: • Develop and maintain:, • Technical budgets for vehicle performance, • System requirements and verification techniques, • Simulations and analysis across vehicle functions, • Test methods and data analysis, • Lead and own technical development of spacecraft missions, • Assist with program and product management, • Develop, in collaboration with team members, interface specifications, CONOPS definition, and other design documents (Please note: this position can be hired at the Systems Engineer I or Systems Engineer II level) QUALIFICATIONS YOU'LL BRING AS SPACECRAFT SYSTEMS ENGINEER I: • Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline), • Engineering experience in the aerospace industry, • Experience supporting satellite or spacecraft development programs, • U.S. citizenship required due to program requirements QUALIFICATIONS YOU'LL BRING AS SPACECRAFT SYSTEMS ENGINEER II: • Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline), • 2+ years of engineering experience in the aerospace industry, • Experience supporting satellite or spacecraft development programs, • U.S. citizenship required due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD engineering in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline), • Understanding of key spacecraft subsystems and their associated components, including: attitude determination and control (ADCS), electrical power systems (EPS), space-ground communications, on-orbit command and data handling (C&DH), and thermal control, • Thorough understanding of the space environment, orbital mechanics, and rigid body dynamics, • Experience with MATLAB, Python, and STK, • Experience with requirement management tools such as JAMA or DOORS, • Experience with satellite operations, • Experience with testing electrical subsystems and assemblies, thermal vacuum or random vibration, and hardware-in-the loop (HITL) testing, • Ability to work in a dynamic environment with competing priorities ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$80,000—$130,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighter Responsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an avionics electrical engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design Preferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • Strong analysis and troubleshooting skills, • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experienceAdditional Requirements:

Job Description Position Summary: The Quality Engineer is responsible for monitoring and improving the quality of our operational processes and outputs. The Quality Engineer’s responsibilities include designing quality standards, developing quality control systems, determining corrective actions, planning, and conducting activities concerned with the quality assurance of industrial processes, materials, and products. This position is a key liaison with internal staff, suppliers, and customers on Quality related matters. Primary Duties & Responsibilities: • Maintaining the AS9100 Quality Management System., • Supporting of customer, AS9100, and NADCAP audits, • Conducting internal audits and identifying areas for improvement., • Understanding customer demands and expectations of products and services, • Develops training documentation for specific processes in compliance with customer and quality requirements., • Participating in design reviews, risk management, continuous improvement, approval of routers for new products, contract review, and PPAP activities., • Creating and enforcing quality standards, procedures, and policies., • Working closely with all departments/functions to develop procedures/work instructions for new processes, identify improvement and training needs, and develop performance goals., • Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management., • Manage Root Cause & Corrective Action process for external and internal customer complaints., • Develops new approaches to solve problems identified during quality assurance activities., • Interface and assist with supply chain development and initiatives; evaluate supplier performance; maintain suppliers’ qualifications up to date. Required Skills: • Knowledge of lean manufacturing basics and AS9100 quality system requirements, • Working Knowledge of problem-solving tools, • Experience in blueprint reading, • PPAP and AS9102 experience, • Strong organization and planning skills, • Proficient use of Microsoft applications Required Experience: • At least 5 years of experience in the quality field, aerospace industry preferred Level of Education: • Bachelor’s degree (B.A.) from a four-year College or university; in Mechanical, Electrical, Manufacturing, Aerospace Engineering or related technical discipline., • ASQ CQE certified (preferred) Company DescriptionWith over 20 years of experience AnDek Staffing has created and maintained relationships by understanding our partners needs and continuously seeking ways to improve our services.With over 20 years of experience AnDek Staffing has created and maintained relationships by understanding our partners needs and continuously seeking ways to improve our services.

Job Description The role of the Conveyor Controls Engineer requires thorough knowledge of electrical design and engineering techniques, as well as PLC/HMI programming and CAD skills. Responsible to plan and conduct independent work requiring judgment in evaluation, selection, application, and adaptation of engineering techniques, procedures, and criteria. Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, and monitor work for compliance to applicable codes, accepted engineering practices, customer specifications and CLE standards. Typical duties will include but not be limited to the preparation and/or modification of the following: • Confirm with engineers, customers, and others to discuss existing or potential engineering projects and products., • Design, implement, and improve electrical instruments, equipment, components, products, and systems for industrial purposes., • Operate computer and computer systems (including hardware and software) to program; write software, setup functions, or process information. Experience with the following is highly desirable, • o Allen-Bradley ControlLogix / GuardLogix, • o Allen-Bradley PLC5 / SLC, • o Allen-Bradley FactoryTalk View, • o Allen-Bradley PowerFlex Drives, • o Modicon ProWorx NXT, • o Wonderware InTouch, • o Ethernet Communications, • o DeviceNet Communications, • o Data Highway Communications, • Oversee project efforts to assure projects are completed satisfactorily, on time and within budget., • Direct and coordinate manufacturing, construction, installation, documentation, and testing activities to ensure compliance with customer specifications, codes, and requirements., • Prepare and study technical drawings and specifications of electrical systems to ensure that installation and operations conform to customer standards and requirements., • Compile data and write reports regarding existing and potential engineering projects., • Conduct field surveys., • Investigate and integrate (electrically) to vendor supplied equipment., • Inspect completed installations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. • Requires a broad knowledge in electrical engineering and a solid knowledge or principles and practices of related areas., • Requires a broad knowledge of the application of electrical engineering to plant constructability as applied to construct methods and materials., • Performs assignments independently with little instruction as to the general result expected and with guidance from department manager and or lead engineer., • Provide technical direction and on-the-job training to drafters, designers, and engineers., • Direct and manage project development from beginning to end., • Define project scope, goals, and deliverables from the CLE proposal documentation., • Develop full-scale project plans and associated communication documents., • Effectively communicate project expectations to team members and senior management in a timely and clear fashion. Hold regular status meetings with project team(s)., • Estimate the resources and participants needed to achieve project goals., • Manage project budgets., • Determine and assess the need for additional staff and/or consultants and make the appropriate adjustments during the project cycle., • Set and continually manage project expectations with team members and senior management., • Delegate tasks and responsibilities to the appropriate personnel., • Identify and resolve issues and conflicts with the project team., • Identify and manage project dependencies and critical path., • Plan and schedule project timelines and milestones using appropriate tools., • Track project milestones and deliverables., • Develop and deliver progress reports, proposals, required documentation, and presentations. Keep project team well informed of changes., • Determine the frequency and content of status reports from the project team, analyze results, and troubleshoot problem areas., • Proactively manage changes in project scope, identify potential crises, and devise contingency plans., • Define project success criteria and disseminate them to involved parties throughout project., • Coach, mentor, motivate, and supervise project team members and contractors, and influence then to take positive action and accountability for their assigned work., • Conduct project postmortems and create a recommendations report in order to identify successful and unsuccessful project elements., • Develop best practices and tools for project execution and management. Skills/Qualifications: • Provide creative solutions to solve customer problems., • Active Listening by giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate and not interrupting at inappropriate times., • Troubleshooting of equipment to establish the cause of errors and determining how to solve the problem., • Experience at working both independently and in a team-oriented, collaborative environment., • Conform to shifting priorities, demands and timelines through analytical and problem-solving capabilities., • React to project adjustments and alterations promptly and efficiently., • Flexible during times of change., • Ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines., • Persuasive, encouraging, and motivating., • Ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments., • Ability to bring project to successful completion., • Strong written and oral communication skills., • Strong interpersonal skills., • Ability to conduct research into project related issues and products., • Must be able to learn, understand, and apply new technologies., • Customer service skills. Develop lasting relationships with client personnel that foster client ties. Communicate effectively with clients to identify needs and evaluate alternative business solutions, continually seek opportunities to increase customer satisfaction and deepen client relationships., • Ability to effectively prioritize and execute tasks in a high pressure environment., • Bilingual English / Spanish desired but not required. • Robotic experience a plus Work Conditions: • Overtime will be required in order to meet project deadlines.

Job Description SUMMARY The Inside Sales Rep. will be responsible for selling Caterpillar Parts, Service and Insurance Product Sales to drive the enhancement of customer service satisfaction, maintain & build our customer base, provide professional service standards for business follow up, acquire subsequent service lead generation, & provide timely quotations to leverage increased financial success. RESPONSIBILITIES -Working directly with service supervisors, technicians, and Coordinators for the purpose of identifying turn around timeline requirements, leveraging additional up sell opportunities, driving the sale, & scheduling of repairs & pm’s; while promoting customer satisfaction through a highly informed customer to create future loyalty. -Review all written reports & photographic documentation to ensure a solid quotation. You will employ methods such as; expert quote assistance, job walks, delegation of quoting a specific scope of work through an internal or external vendor in order to provide a fully documented parts list & service execution plan prior scheduled event. -Provide influence to customer for all service technician recommendations reported by a Technicians, managing representative, or as a result of being reported under a CSA inspection or service event. -Promote up sell opportunities for Advanced Electrical Services (Engineering Services) bundled into CSA’s contracts -Solicits opportunities for private or government bid packages -Identify & pursue additional business opportunities by creating new or utilizing existing exception reports such as; new customer account number report, inactive CSA’s, expiring ESC’s, expiring factory warranty, PIP & Safety letter completion report, DBS equipment population list, IMACS new product sales list. -Investigate/resolve customer service issues communicated by the customer when assigned by management. -Interface as service liaison between customers, service technicians, supervisors, & sales representatives to culminate a team effort. -Work with technical quoter(s), management, & expert company resources to ensure quotes are accurate in materials, labor, and support requirements as requested for assured profitability and customer satisfaction. -Develop and maintain a close positive working relationships, open communication, & personal accountability with all associates; to include, sales, service, parts, engineering, vendors, and all support departments. -Maintain & strive to enhance your professional knowledge of new products, parts, & services, through personal engagement within manager assigned training lessons or individually selected courses performed online under the factory sponsored Dealer Performance Center (DPC). QUALIFICATIONS Two (2) years related experience and training, or equivalent combination of education and experience. Individual possess background knowledge of the Caterpillar and or competitor product lines within the commercial engine market. Position requires the ability to learn & perform Caterpillar dealer business operations within the Dealer Business System (DBS), TMI, Caterpillar (CWS), Saleslink, & IMACS. Soft skills proficiency within: Word, Access, Excel, PowerPoint, Adobe, and Internet applications. Maintain the ability to manage, organize, plan, and delegate specific courses of action through until completion to achieve assigned objectives and business unit mandates. Individual demonstrates well-written and verbal communication skills, has a high school diploma or equivalent as required. Candidate should possess management deemed comparable business experience, technical trade certification, or a professional degree would be a plus. One must maintain a valid California driver’s license in good standing. Need a self-starter with strong communication, organization, customer service, & PC soft skills. Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description Project Manager, Transmission & Distribution Design Coordination Description Location: San Diego, California. Candidate must currently reside in the San Diego County region or must be willing to relocate within sixty (60) days of hire. Hybrid work model: 60% on-site as needed, 40% remote. General Summary: The Project Manager is responsible for managing and overseeing all aspects of gas and electric utility projects. Projects are in and around in high-voltage substations and overhead distribution lines. The incumbent in this role will efficiently meet project safety, quality, schedule, and cost goals, while managing internal and external stakeholders across multiple business units. This position will work with multiple departments and processes to support work execution, problem solving, planning, and process improvement. The Project Manager will proactively lead and facilitate teams through issues and is responsible for the efficient execution of work items and conditions of the areas in which they are assigned. Supervision Level: Reports to Manager, Transmission and Distribution Program Delivery. Responsibilities: • Manages and oversees all aspects of a project to ensure it is completed on time and within budget., • Responsible for managing scope, cost, schedule, vendors, and contractual deliverables., • Develops detailed project plans, monitors project milestones, and generates status reports., • Evaluates and manages risk; incorporates quality measures and standards into project deliverables., • Manages several project workstreams., • Directs project progress and establishes administrative guidance on project execution., • Monitors project budgets and develops monthly variance reports., • Qualifies and quantifies project issues and risks and develops response plans to resolve., • Understands current and future business goals and ongoing concerns., • Performs other duties as assigned. Position Requirements Knowledge, Skills, and Abilities: Experience: • Project Manager I: A minimum of 3 years of project management experience., • Project Manager II: A minimum of 5 years of project management experience., • Experience with managing small through large-scale system protection projects from inception through completion., • Experience working in a regulated utility/energy, DOE, DOD, or equivalent environment., • Experience with electric transmission and distribution or civil construction projects., • Knowledge of NERC and FERC standards, including G.O.95, regional requirements, policies, and procedures., • Understanding of principles and practices of electrical design and planning specific projects., • A strong business aptitude, with knowledge of research methods, including data collection, analysis, and critical thinking., • Knowledge of project planning, scheduling, cost management, budget forecasting, and risk qualification, quantification, and mitigation., • Experience managing multiple stakeholders, scheduling demands, and ad-hoc requests., • Excellent verbal, written, and interpersonal skills; skillset will be evaluated prior to engagement., • Research methods, including data collection, analysis, critical thinking, and problem solving., • Project planning, scheduling, cost management, budget forecasting, and risk qualification, quantification, and mitigation., • Principles and practices of project management as defined by Project Management Institute (PMI) or accredited standards., • Agile and Scrum project management methodologies., • Safe working practices, building codes, and regulations applicable to the assigned projects., • Work well under pressure., • Influence others and convey complex project and program deliverables concisely., • Change Management, Scope Management, Stakeholder Management, Technical Project Management., • Fit/Gap Analysis., • Project Administration, Project Controls, Project Documentation, Project Implementation., • Project Lifecycle Management (PLM), Project Planning, Project Scheduling, Project Scoping., • Budgetary Controls., • Bachelor’s degree in project management, computer engineering, business management, or equivalent field; equivalent experience with customer approval. Physical demands are representative of those that an employee must meet to perform the essential functions of this job successfully. While performing this job, the employee may be exposed to weather conditions prevalent at the time. In delivering projects, the incumbent will work in and around high voltage, energized electric equipment. • Sit or stand at a desk and use a computer workstation for up to 6 hours per day., • Reach and use hands and fingers to feel objects or controls., • Climb stairs and walk on uneven or unpaved surfaces., • Traverse inclined or rough terrain. Salary: The salary range for this role is $80,000 – $125,000. This range is only applicable for jobs to be performed in San Diego, CA. This is the lowest to highest pay scale we reasonably expect to pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the pay range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, and business or organizational needs. Full-Time/Part-Time Full-Time Exempt/Non-Exempt Exempt EOE Statement 4Liberty is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status, or any additional characteristic protected by law. Application Link Company DescriptionEstablished in 2009, 4Liberty is a certified Woman-Owned Business Enterprise (WBE) based in San Diego, California. We are a leading consultancy specializing in technical and professional services, dedicated to assisting utilities in navigating the energy transition and modernizing the grid to meet government mandates and sustainability goals. With a diverse and dedicated team of professionals, we work with utility, commercial and government clients to modernize and build resiliency across critical infrastructure, providing turnkey PMO services for large scale programs to diverse clients across the United States and Canada. At 4Liberty, we believe in work that goes beyond the ordinary, where each team member's contribution is valued. If you are seeking a fulfilling career in an environment that fosters collaboration and excellence, your search ends here. Explore career opportunities with us at in 2009, 4Liberty is a certified Woman-Owned Business Enterprise (WBE) based in San Diego, California. We are a leading consultancy specializing in technical and professional services, dedicated to assisting utilities in navigating the energy transition and modernizing the grid to meet government mandates and sustainability goals.\r\n\r\nWith a diverse and dedicated team of professionals, we work with utility, commercial and government clients to modernize and build resiliency across critical infrastructure, providing turnkey PMO services for large scale programs to diverse clients across the United States and Canada.\r\n\r\nAt 4Liberty, we believe in work that goes beyond the ordinary, where each team member's contribution is valued. If you are seeking a fulfilling career in an environment that fosters collaboration and excellence, your search ends here.\r\n\r\nExplore career opportunities with us at .

Job Description About Climatec / Bosch Building Technologies For over 50 years, Climatec has steadily invested in its people, technology, and services to be a trusted business partner for building solutions. As part of the Bosch Building Technologies Integrator Business in North America (and soon to operate under the unified name Bosch Building Technologies beginning January 2026), Climatec is one of the leading providers of building technologies and energy solutions in the nation – delivering results for thousands of customers every day. Climatec’s strategic business partners include the world’s leading suppliers of building automation, security, life safety, HVAC, PLC, and energy efficiency technologies. About Bosch The Bosch Group is a privately held supplier of innovative technology and services with over 400,000 associates worldwide. Its unique private ownership structure was established to promote entrepreneurial freedom and long-term business focus. Bosch’s operations serve millions of customers across four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, Energy and Building Technologies. Level Descriptions: Level I – Must be able to achieve many objectives of this position. Requires some amount of timely supervision to ensure the proper tasks are being accomplished and that communication is adequate, timely, in the correct manner (i.e. verbal, written, email, etc.). Level II - Consistently achieves all of the objectives of this position. This individual also provides mentoring and direct day-to-day supervision to level I positions. Senior - Highly experienced in the position. Advanced awareness of the technical needs of controls system programming, integrations to other systems, and very sophisticated HVAC strategies if working in the control field. Job Duties & Responsibilities: • Provide Controls database, graphics, programming, etc. for sequences as provided by the Design Specialist, project specifications, or other applicable sources., • Provide accurate controls of systems start-up and commissioning including point-to-point checkout on projects as assigned. Verify correct alarm, annunciation, and other actions by equipment, devices, panels, and annunciators of Controls projects., • Support installation personnel on project sites., • Provide information and support for other contractors on project site., • Debug installation issues during both the static and dynamic start up and commissioning of building controls. Provide support to Climatec and other contractors to solve building operating issues that go beyond the controls or special systems operation., • Provide input to others as requested or required to assist in the accurate estimation, design, installation, start up, commissioning, and training for building systems., • Provide start up documentation including daily logs, check out logs, commissioning documents, etc. as required for assigned projects., • Ensure timely software backups are created for projects and software development., • Provide service support on existing installations ensuring systems continue to meet existing building occupancy codes., • Provide service support on existing systems ensuring their proper and efficient operation as well as providing ongoing support to the facility’s building engineers., • Complete time sheets, service work orders, and other paperwork required for this position in an accurate and timely manner., • Assist in preparing of as-built drawings and Operation & Maintenance Manuals., • Assist in turnover of projects from Operations Team to Service Team., • Assist Sales team during estimating phase including potential product or system demonstrations., • Other duties as assigned., • As necessary, travel will be required to the job site to complete startup, commissioning and assistance to the onsite personnel to complete the project. This will be on a caseby-case basis, depending on the size, scope, and requirements of the project(s). Skills & Qualifications: Minimum Qualifications: • Minimum of high school diploma., • Two year technical degree in HVAC or Electronics related studies preferred. An undergraduate degree in Electrical or Mechanical related studies is excellent or comparable field experience., • 2+ years of programming experience with Building Automation., • An understanding of computer operating systems including MS Office Suite of products., • The ability to configure and debug computer and networking problems., • A clear ability to work with electronic equipment such as volt meters, amp meters, oscilloscopes, etc., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • A working understanding of AC power circuitry including breakers, multi-phase power, etc. (120VAC and greater) Clear and concise ability to communicate verbally and in writing., • An ability to understand empathetically the issues and perceptions others have and to creatively and successfully work through these issues to achieve a successful outcome and customer and employee satisfaction., • N4 Certification. Preferred Qualifications: • 3+ years of programming experience with Building Automation., • 3+ years of programming experience with Niagara., • A thorough understanding of HVAC operations within a facility if working in the controls field., • Very deep understanding of the DDC or special systems that control buildings. Employee Benefits: • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Essential Job Functions: • Be able to lift and carry ladders, drawings, personal computers, material, etc., • Be able to lift up to 50lbs., • Be able to spend significant time standing and walking on construction sites., • Be able to climb several flights of stairs or ladders throughout a typical day on a construction site., • Maintain a satisfactory driving record which, per Climatec’s vehicle policy, allows the individual to drive on company business. Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job

Job Description DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our customer solutions department for a Technical Product Support Specialist. • Pay range is $20-35/hr (based on skills/knowledge/experience), • Location: onsite in Carson, CA Job Description: • Serve as the first point of contact for technical inquiries via phone, email, live chat, or a ticketing system., • Troubleshoot and resolve basic product issues related to installation, configuration, and performance for products such as LED fixtures and lighting control systems., • Provide pre- and post-sales technical support to sales teams and end-users., • Document customer interactions, troubleshooting steps, and resolutions clearly and accurately within a ticketing system., • Escalate complex or unresolved issues to engineering teams and track their progress until resolution., • Maintain and update internal knowledge base articles and documentation for common issues and solutions., • Identify errors or omissions in customer facing documentation and work with relevant departments to resolve or improve., • Stay up-to-date with new product launches, technical specifications, and industry standards by participating in regular training sessions., • Assist with other technical and product-related tasks as assigned, such as creating wiring diagrams or conducting customer training., • Assist with onsite customer service visits if required. Requirements: • Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred., • Experience: 1+ years of experience in a customer-facing role, preferably in a technical support, customer service, or inside sales position., • Technical knowledge: Basic understanding of electrical systems, LED lighting, and common troubleshooting techniques is highly desirable. Experience with lighting control systems (e.g., DMX, 0-10V, smart home controls) is a plus., • Customer service skills: Proven ability to provide excellent service and maintain a positive, patient, and professional attitude, especially during stressful situations., • Communication: Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical users., • Problem-solving: Strong analytical and diagnostic skills with keen attention to detail. Company DescriptionDMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service. Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you. DMF Lighting is proud to be an Equal Opportunity Employer.DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.\r\nOur in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.\r\n\r\n\r\nDMF Lighting is proud to be an Equal Opportunity Employer.

Job DescriptionIf you are interested in multiple locations please only apply once, your preference will be discussed during the screening process. At Fehr & Peers, we are a diverse group of individuals with one thing in common—a passion for transportation. We highly value that same passion in candidates for our team. Our Entry-Level Transportation Engineers and Planners may expect to build a career foundation through a wide variety of experiences. Our emphasis on the early development of project management and technical skills provides the tools for success as well as a foundation for increasing career growth. These opportunities for personal and professional growth are maximized through experience in both planning and engineering project work and by exposure to a multitude of project types and tasks, including the following: - Transportation impact studies - Bicycle and pedestrian planning - Access, circulation, and parking studies - Multimodal operations assessments - Complete streets planning, operations, and design - Cost estimates and project specifications - Transit forecasting and operations - Travel behavior forecasting - Vehicle miles of travel (VMT) assessments - Systemic safety studies - Highway interchange/corridor studies - Climate action plans - Freight planning - Transportation demand management (TDM) plans - Design drawings from the conceptual stage all the way to construction-ready documents, including the following: - Bikeways/complete streets - Signing and striping - Traffic signals/ITS - Street lighting - Roundabouts - Temporary traffic control Please review the responsibilities below. Ongoing: • Conduct transportation analysis and write reports, • Participate in meetings, including preparing presentations and public outreach materials, • Handle project management responsibilities, • Participate in professional organizations, • Conduct site visits and collect field data, • Explore the Fehr & Peers internal Research and Development program By the end of the first month:, • Participate in on-the-job training and mentoring, • Work on a few different projects, • Seek additional work from project managers By the end of six months:, • Work on a variety of projects with most staff in the office, • Use several technical software programs, • Prepare deliverables, including memos, reports, and presentations By the end of the first year:, • Attend multiple client meetings, • Increase responsibility for managing small projects Qualifications (We encourage all applicants to apply, even if you don't meet all of the qualifications listed below), • An entrepreneurial spirit and proactive approach to communication and getting work done, • Genuine curiosity for the work and familiarity with the challenges of day-to-day travel within your community, • Completed bachelor’s or in-process master’s degree in transportation, civil or electrical engineering, urban and regional planning, or a related major (e.g., geography, math, statistics, economics), • Coursework in transportation, engineering, urban and regional planning, geography, math, statistics, economics, or other related courses (an EIT for engineering candidates is preferred), • Experience or exposure related to the following topic areas (note that experience in all these areas is not required) Topic Areas: Field work, traffic operations analysis, signal design, transportation planning (e.g., bicycle or transit plans, infrastructure finance, transportation and land use policy, and/or travel demand modeling), • Experience or exposure to relevant software (note that experience with all software is not required). General–Microsoft Excel, GIS (ArcGIS, QGIS), and/or CAD (AutoCAD, Microstation). Traffic Operations Analysis–HCS, Synchro/SimTraffic, Vistro, VISSIM, and/or Sidra. Travel Demand Modeling–Cube/Voyager, TransCAD, VISUM, and/or Emme. Programming–Python and/or R., • Previous work experience in an office setting related to a topic area listed above, • Experience with technical writing and public speaking through school and/or work experience, • Interpersonal skills, a desire to collaborate, and a creative approach to problem-solving

Job Description Job Title: Service Advisor Department: Service Reports to: Service Manager FLSA Status: Exempt Position Summary: The service advisor is responsible for scheduling service work in the service department and for selling additional services to customers. Essential Duties & Responsibilities: • Maintain Customer Satisfaction Index (CSI) rating as set by service manager., • Maintain the prescribed standard for “hours per customer repair order written”, • Greet customers in a timely, friendly and professional manner. Let customers who are waiting know that they will be helped soon., • Communicate with customer to determine the nature of their mechanical problem(s)., • Obtain accurate customer and vehicle data., • Test-drive vehicle as necessary., • Advise customers on the care of their cars and the value of maintaining their vehicles in accordance with the manufacturers’ specifications., • Lift the hood of every vehicle and look underneath for potential additional repair needs., • If additional work is needed, clearly explain the exact repair instructions, making a special note of the main reason(s) the customer brought the vehicle in. Repair orders must be legible., • Notify dispatcher of incoming work., • Provide estimates for labor and parts. If the cost of service cannot be established during reception, leave open and contact the customer later for approval., • Establish each customer’s method of payment. Obtain approval of credit, if necessary., • Obtain customer’s signature on repair order; provide customer with a copy., • Follow up progress of each repair order during the day. Contact customer by telephone regarding any changes in the estimate of time promised. Record changes on repair order in the approved manner., • Handle telephone inquiries regarding work in process and appointments., • Compare final invoice with original repair order., • Analyze quality control report to ensure that work is completed as requested to reduce comebacks., • Deliver vehicle to customer and answer any questions., • Maintain follow up program on additional items found in need of repair., • Attend meetings as scheduled., • Establish and maintain good working relationships with customers to encourage repeat and referral business., • Ensure that work areas and customer waiting areas are kept clean. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience: Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and distance vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions, moving mechanical parts and outside weather conditions. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. Signature (Employee) Date Signature (Supervisor) Date

Job DescriptionSalary: $20.00 - $25.00 Job Summary National Polytechnic College - has an opening for an Admissions Coordinator. We are a Private Postsecondary Vocational College with our main campus located in Lakewood California geared toward training students for various careers in the healthcare and technical field. The ideal candidate will be enthusiastic, people oriented, have a winning and competitive attitude, hardworking and a great communicator. POSITION SUMMARY Responsible for the promotion and recruitment process; introduces the college and thoroughly reviews all training and educational programs to prospective students; exclusively markets our growing Heating, Ventilation, Air Conditioning, Refrigeration (HVAC-R) program and electrical technician programs to own field-related prospects; conducts all admissions activities with the highest integrity and business ethics while adhering to state, federal, and college, accreditation policies and regulations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Responsible for the promotion and the recruitment of prospective students., • Adheres to the college Admissions Code of Ethics, policies and procedures., • Communicates effectively when working with prospective, future and current students while avoiding misrepresentation at all times., • Works compliantly within federal and state regulations., • Contacts prospective students by telephone, email or text message to schedule appointments for interviews., • Provide superior customer service when interacting with prospective students on the phone, in writing, by email, text message and/or in person. Assists and discusses the benefits of education with prospective students., • Schedule the prospect students to attend an orientation session prior to the start date of class and ensure the prospective student has a positive experience., • Produces inquiries and helps increase referrals., • Ensures a positive work environment that puts the needs of the student first while fostering a team oriented approach in coordinating student needs with other departments., • Forecasts new incoming students by program in order to assist in planning for classroom capacity., • Inputs all admissions activity into college database management system in a timely and accurate manner., • Actively participates in training and development as needed both in a group and individually., • Submits required reports and projects in a timely manner. Maintains and organizes inquires and enrollment paperwork., • Represents the college accurately and upholds college values at off-site events., • Provide feedback to the college directors about successes, challenges, and areas of continuous development of the recruitment process., • Possess knowledge of HVAC-R, electrical, medical imaging and other related programs., • Ability to meet and exceed goals in a fast paced environment., • Skills in strong customer service., • Skills in establishing and maintaining effective working relationships with students, staff, faculty, and the public., • Ability to project a professional image in person, over the phone, writing, and social media., • Possess quality voice skills, speak well, and be clearly understood via telephone and in person., • Strong organizational skills., • Capacity to work in a fast-paced environment and be a self-starter., • Ability to focus on specific goals for achievement., • Possess a strong drive to achieve assigned goals., • Ability to work within a team and be a team player., • High School diploma or equivalent required (College degree is a plus), • Experience in Admissions a plus, • Bilingual English/Spanish is a plus!, • Salary is negotiable based on experience Job Types: Full-time Salary: From $20.00 per hour Schedule: Benefits: • Dental insurance, • Health insurance, • 8 hour shift, • Day shift

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Senior level estimator who specializes in Mechanical/Plumbing and Electrical trades to report to PMO Program Controls Manager and Chief Estimator., • Plan and participate in the preparation of construction cost estimates of buildings or other structures from drawings, outlines, and specifications., • Prepare estimates per design based on scope and building type., • Evaluate cost estimating deliverables prepared by consultants for cost containment, accuracy, uniformity and completeness., • Prepare fair cost estimates for cost proposals from Contractors for extra work., • Perform special studies and prepare reports when contractors bids vary from the construction cost estimate., • Conduct construction/project site visits gathering relevant information and determine what information to be used to produce project estimates., • Evaluate pricing documents, historical and vendor cost data for the development of cost estimates and price recommendations., • Evaluate quotes, bids, change orders, value engineering reports, and claims for accuracy and completeness of estimates., • Compile and analyze data on all factors that influence costs such as material, labor, equipment and profit., • Prepare technical evaluations, cost estimating draft report, memos and letters and present recommendation to management., • Perform other related estimating duties as assigned.Minimum Required Qualifications:, • 10-15 years recent professional experience in the preparation of complete cost estimates for type I, II, or III, and V building construction as defined by the State building code including two years in a supervisory capacity., • Expert in theories, principles, and practices of cost estimating and contract pricing., • Expert in JOC (Job Order Contracting) form of contracting, • Full knowledge of construction methods for buildings and structures., • Full knowledge of current local construction labor and material costs., • Extensive experience in developing and estimating the scope of work for change orders., • Ability to compare cost estimates with contractors proposal to quickly identify discrepancies., • Ability to develop scope of work based on RFI/RFC answers and estimates the detailed costs of those scopes of work independent of the contractor proposal., • BS/BA Degree in Engineering, Architecture, Construction Management, Business or related degree. Additional qualifying experience in excess to the minimum stated above may be substituted for the required education on a year for year basis., • Ability to work in a fast-paced environment.Preferred Qualifications:, • Expert in usage of eGordian Database for JOC (Job Order Contracting) estimating, • Knowledge of Prevailing Wage/Union Labor rates, • Knowledge and use of RS Means including NECA and MCAA labor productivity, • Knowledge and use of RS Means Cost Estimating online system

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. LEAD, QUALITY ENGINEER - SPACE SYSTEMS Based out of Rocket Lab's headquarters in Long Beach, CA the Lead, Quality Engineer – Space Systems is responsible for overseeing the properly introduction and implementation of new products and product revisions related to both Satellites and Avionics modules for Rocket engines. You will support the Quality Manager and Production and Engineering Organizations with deliverables required for internal leadership, board of directors and investors. WHAT YOU'LL GET TO DO: • Develop and implement Quality Control Processes and Standards., • Lead, facilitate, and participate in root cause investigations., • Identify and prioritize Risk to Mission Success, • Identify and categorize quality problems that are impacting the company's ability to deliver conforming hardware on schedule, • Ensure adherence to QMS policy and procedures within their work center and creation of procedures when needed., • Efficiently communicate status of evaluation and disposition to leadership., • Lead and coordinate management of non-conforming hardware, including ticket dispositions, analysis, and improvement projects., • Lead cost saving initiatives, especially related to product yield., • Contribute to design reviews to reduce quality risk and time lost due to non-conformances., • Lead a team of Quality engineers through development and improvement initiatives. YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in aerospace, electrical, mechanical, industrial, material sciences engineering, or similar engineering discipline, • 5+ years of experience as a quality engineer in aerospace or spacecraft manufacturing environment, • Hands-on quality and testing experience, • Strong Knowledge of quality tools such as Lean principles, Six Sigma, Root Cause Analysis and Corrective Action, Advanced Product Quality Planning (APQP), Metrology, Process Failure Mode and Effects Analysis (PFMEA), Control Plans, or various problem-solving approaches., • Experience in a leadership position. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Advanced engineering degree (Preferably, Aerospace, Mechanical or Electrical), • Systems Engineering or Reliability Knowledge, • Experience successfully overseeing developing and introducing new product(s) to production., • Proven track record of year-on-year product and process improvement activities., • Conducted both process and design failure modes and effects analysis (FMEA)., • Track record of leveraging new technologies to develop real shop floor solutions., • Propulsion manufacturing experience and testing highly desirable., • Experience supporting production of complex, mechanical, or composites systems in high volume work centers and/or during production ramp-up, • Advanced engineering degree (Preferably, Manufacturing, Mechanical, Electrical, or Aerospace), • Strong knowledge of manufacturing processes common to fluid components, • Experience with assembly & testing of turbomachinery and combustion devices ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$100,000—$135,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Chief Estimator is responsible for planning, coordinating, and supervising the division's estimating program providing technical and administrative direction to ensure corporate objectives are met. WHAT YOU'LL DO: * Manage and administer department functions including operating budgets, staffing, wage reviews, work assignments, performance evaluations, bid results and archives, etc. * Responsible for implementing and maintaining corporate estimating procedures utilizing the corporate computer estimating system and database. * Assist Executives, Business Development, and Project Management to determine what types of projects to bid on, strategies, techniques, etc. * Review all final estimate packages to ensure accuracy and completeness, prior to formal quotation * Review scope/proposal letters for bid and negotiated projects * Participate in presentations to corporate management and Clients. May be responsible for closing the ”sale”. * Provide technical assistance in negotiating contracts, change orders,etc.as required * May assist in the preparation of studies, materials and methods, recommendations, and cost estimates as required. * The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position.This is not a complete listing and other duties will be assigned based on the position role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Advanced management or technical training preferred * Organizational, supervisory, and decision-making/problem-solving skills essential * Proficient in using a computer and Microsoft Office (Outlook,Word,Excel,etc) * Familiar with modern computer estimating sysytems * Ability to prioritize, manage multiple tasks, and change priorities as necessary * Ability to work under time pressure, continual deadlines and adapt to changing requirements with a positive attitude * Effective oral an written communication skills as required for the position * Self-motivated and can work independently and as part of a team * Ability to interact effectively and professionally with all levels of employees both management and staff alike, vendors, clients, and others COMPETENCIES: * Leadership * Financial Awareness * Quality WHAT YOU BRING TO US: * Bachelor's degree in Construction Management, Engineering, or a business-related field * Minimum10years of experience in similar facility construction estimating and related functions plus a thorough knowledge of corporate objectives impacting estimating, estimating strategies and techniques, and construction contracts required * Can be a combination of education and technical/fieldt raining such as Engineering, Estimating experience. TRAVEL: * Up to 10% or as required WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Pay Range $158,500.00-$208,100.00 Annual The pay range for this role is what we expect to pay for candidates that meet the specified qualifications and requirements listed on this job description. Candidate's pay can vary based on location, job-related experience, skills, and education. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSunStrong Management, an independent, full service asset management and servicing company for the renewable energy industry and one of the largest residential solar asset managers in the U.S is seeking a Field Service Manager in Southern California. Field Service Manager Responsibilities • Manages team of field technicians, field service supervisors, and foremen to execute an operational plan to complete all system warranty repairs and service requests within service levels and cost., • Create and execute strategies to achieve service level targets for system repairs by coordinating materials, inventory, fleet vehicles, technicians, and maintenance requirements., • Leads coordination of field activities to service the systems, either by internal resources or partner technicians, • Recommend and champion product and service trainings to improve regional performance., • Accountable for work order KPIs; response time, resource allotment, duration, and first visit resolution., • Communicates opportunities and recommendations for modification or improvements to processes to assure optimum efficiency of the company assets., • Manages inventory for designated region with focus on maintaining sufficient inventory to balance reduce costs and reduce truck rolls, • Responsible for development and management of service order completion strategy to reduce costs, reduce service visits, reduce time to closure, and increase customer satisfaction., • Improves customer satisfaction with field service as measured by customer surveysMinimum Requirements, • High School Diploma (or GED), • Electrical Training, • 5 years’ related experience, • Experience with direct reports, • Bachelor’s Degree in related discipline, or equivalent combination of education and experience, • Working knowledge of Salesforce.com, • Extensive customer service skills, • Strong problem-solving skills, • Computer and Computer program skills such as Microsoft Office - Excel, Word, and Outlook, • Strong home construction or residential electric knowledge, • Strong written communication skills to communicate with all levels of management, • Detail oriented with the ability to multi-task, • Excellent judgment in customer relations and managing company resources, • Ability to work as a team member and interact with other departments, • Remote position working in the field, • 75% estimated travel time; location varies with jobsite, • Able to sit, stand, walk, and drive for up to 8 hours at a time, • Comprehensive benefits, including medical, dental, vision, life insurance, and 401(k), • Competitive compensation, • Company vehicle and corporate card providedWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. If you are selected for a position, your employment will be contingent upon submission to and successful completion of a post-offer/pre-placement drug test (and medical examination if required by the role) as well as pre-placement verification of the information and qualifications provided during the selection process. Powered by JazzHR V252vro96Q

Job DescriptionDiesel and Equipment Mechanic Reports to: Fleet Manager Location: Norwalk, CA Schedule: Wednesday-Saturday 8:00am to 6:00pm Salary: $35+ p/hr depending on experience Pacific States Petroleum is looking for a diesel mechanic to help maintain our fleet of trucks. This includes but is not limited to completing inspections and preventive maintenance requirements, correcting vehicle deficiencies; making adjustments and alignments; maintaining appropriate maintenance documentation. Requirements of the Job • Display a professional and cooperative attitude during interactions with other departments and maintenance team members., • Respond to breakdowns and emergency repairs at locations other than the home yard., • Periodically, travel to other yards to conduct repairs and routine maintenance., • Diagnose complex issues and perform repairs on vehicles and equipment, including but not limited to intricate electrical system troubleshooting, removing, repairing, adjusting, overhauling, rebuilding, and replacing major assemblies, sub-assemblies, components, parts, or systems., • Ability to maintain and repair items related to tank repair including but not limited to plumping, meters, power take-offs, pumps, valves, and poppets., • Perform Federal DOT and State BIT inspections, complete manufacturer preventive maintenance schedules, install component and part upgrades, control corrosion, complete seasonal preparation procedures, and schedule repairs with an outside vendor if needed., • When possible, contain costs by using warranty claims, evaluating service and parts options., • Adhere to Federal DOT and State BIT regulations, and manufacturer guides., • Ensure the proper disposal of shop waste, yard waste, and HAZ MAT., • Adhere to OSHA and company safety protocols., • Ensure the shop is clean, organized, and in good repair., • Utilize company licensed software to maintain comprehensive records of work performed, parts used, and time spent on each task., • Utilize welding and fabrication skills to repair/modify components when necessary., • Work closely and communicate with other departments to schedule asset repairs and inform necessary parties on the status of asset repairs., • Assist with driver/operator training when necessary., • Develop and maintain relationships with vendors to procure the parts, supplies and special equipment needed to maintain our assets., • Stay up to date with industry advancements, tools, and technologies., • Participate in educational opportunities, read technical and regulation publications., • Complete other duties which may be directed.Qualifications, • Must have own tools., • Maintain the ability to be covered under company insurance when operating company vehicles., • High school diploma or equivalent., • Formal technical training in medium/heavy-duty diesel/unleaded vehicles and equipment mechanics., • 2+ years heavy-duty diesel truck and equipment or automotive repair experience., • Knowledge of diesel engine diagnostics, suspension, electrical, air brake, and hydraulic system troubleshooting., • Minor welding and fabrication skills., • Excellent communication skills., • Excellent problem-solving skills and attention to detail.Physical, • The ability to lift, carry, and move heavy objects (50+ pounds)., • Bending, stooping, and working in awkward positions. Powered by JazzHR LdYqs3sce6

Job Description Living Room A home away from home where creatives celebrate music, art, design and culture. We are a private membership club open to members and their guests only. The Role At Living Room, our Engineers bring a wealth of experience to the table, while actively seeking solutions. In this role, you'll excel both independently and as part of a team, ensuring seamless operation across all fronts. From installing new equipment to conducting routine maintenance and troubleshooting faults, your responsibilities encompass the full spectrum of technical support. Additionally, you may need to facilitate the removal of outdated equipment. A successful Engineer at Living Room is not only passionate about hospitality but also possesses an unparalleled knack for problem-solving, supported by a comprehensive toolkit. They thrive under pressure, adeptly prioritizing tasks while maintaining impeccable organization and cleanliness standards. • Teamwork and Coordination: Act as an influential leader, proactively addressing service calls in a timely manner from each department, including the general manager, engineer manager, and duty manager (DM), in accordance with established standards., • Training and Solution Provision: Provide solutions through various means such as repair, maintenance, alteration, and new installations. Record-Keeping: Identify defects, fill out daily maintenance walk through reports,, troubleshoot malfunctions, take necessary corrective action, and accurately document all work performed within maintenance logs and equipment maintenance records., • Preventative Maintenance: Take a proactive approach in identifying items requiring preventative upkeep and maintenance throughout the property., • Collaboration and Risk Communication: Collaborate with the team to complete requests, follow predetermined workflows, and effectively communicate associated risks., • Workstation Maintenance: Maintain a clean, professional, and orderly workstation to ensure the safety of members, guests, and staff., • Documentation and Reporting: Accurately document all work performed in our Maintenance Work Log.., • Safety Training Partnership: Partner with property leaders to conduct safety training on loss prevention and the company's safety philosophy, promoting safe work habits and maintaining a safe work environment. The Ideal Candidate • A passion for ensuring the seamless operation and maintenance of property facilities to create a welcoming and efficient environment for members and guests., • An understanding of property principles, including engineering skills such as drywall repair, painting, ac diagnosis, plumbing repair and drain clearing, electrical and breaker knowledge, furniture and flooring repair, maintenance procedures, and health and safety regulations to uphold a high standard of living., • Strong organizational and problem-solving skills, including the ability to efficiently manage property maintenance tasks., • The ability to assist a team of maintenance staff, ensuring collaboration and adherence to property standards., • Minimum of 1 to 3+ years of experience working with basic electrical, HVAC, mechanical, and plumbing equipment and systems., • Expert knowledge of building systems with the ability to work autonomously when necessary, as well as proficiency in various painting and finishing work., • Strong communication skills, collaborative mindset, and the ability to motivate teams positively while working on projects., • Capacity to establish professional relationships with leaders and kitchen teams, and willingness to arrive at work prior to the scheduled start time to ensure adequate preparation, including settling in, eating, and receiving briefings on previous and anticipated services., • Proactive approach to problem-solving, demonstrating both independent and team-player capabilities., • Flexibility in schedule, including availability to work mornings, nights, weekends, and holidays as required. Why Join • 100% Healthcare Coverage - choose from United Healthcare PPO and HMO plans or Kaiser for medical. Dental and vision coverage are also included through United Healthcare, it’s part of our commitment to you, • Wellness Benefits for a balanced lifestyle, • Competitive 401k match for your financial future, • Unlimited PTO for salaried members, because you deserve it, • Career Growth opportunities that empower you, • Leader in Development Program, • Learning & Development for your growth with us, • Immersive Trainings that nurture your talents, • Fun and Exciting Team Member Events that build bonds, • Free Team Member Meals to fuel your creativity Our Team Culture At Living Room, we are deeply passionate about our work and we believe that hospitality is a noble pursuit because it’s fundamentally human and an ideal worth chasing. We seek out those that share these beliefs as an inherent second nature and our team member culture is how we bring this idea to life. Our guiding pillars- Be Human, Be Curious, Be Empathetic, Be Soulful, and Be Honest demand that we embody these values in all that we do.

Job Description Location: Various project sites across WAPA regions (Upper Great Plains, Rocky Mountain, Sierra Nevada, Desert Southwest) Salary Range: $80,000-$95,000 DOE Period of Performance: December 1, 2025 – November 30, 2030; exact dates subject to change Join a team of ever-growing professionals who look to make a difference on projects both domestically and internationally. Our organization is growing, and we believe your career should too! Build your future with Project Solutions, Inc. Position/Project Overview: Project Solutions Inc. is seeking a Construction Inspector (Transmission Line) to join a Western Area Power Administration (WAPA), a division of the U.S. Department of Energy, project to support a a multi-year initiative to provide Construction Inspection Services across its four operational regions: Upper Great Plains (UGP), Rocky Mountain (RMR), Sierra Nevada (SNR), and Desert Southwest (DSW). These regions span a 15-state area, including portions of the Midwest, Mountain West, and Western U.S. This project supports the construction, renovation, and maintenance of critical federal power infrastructure, including transmission lines, high-voltage substations, civil works, pre-engineered metal buildings, and other facilities. The work ensures compliance with WAPA's construction standards, OSHA regulations, and other federal safety and quality standards. This role is contingent upon award of project. Responsibilities and Duties: • Inspect construction contractor activities to ensure progress, quality, and compliance with contract requirements, WAPA construction standards, and applicable codes (NEC, NESC, OSHA 1910/1926)., • Support the Contracting Officer (CO) by providing technical input and oversight throughout construction phases., • Review and interpret construction drawings and specifications across civil, structural, mechanical, and electrical disciplines., • Monitor and document contractor progress using WAPA-provided electronic forms for daily reports, safety meetings, labor checks, and special inspections., • Attend and facilitate on-site meetings, including weekly coordination and safety meetings with contractors and WAPA representatives., • Track and report schedule progress by reviewing contractor’s baseline and updated schedules; communicate deviations or delays., • Document field issues and coordinate resolution with contractor superintendents and WAPA field engineers when necessary., • Conduct photo documentation of construction activities and mock-ups; submit bi-weekly JPEG images with captioned reports., • Review and verify quantities and completion of work for monthly contractor pay applications; identify and resolve discrepancies., • Monitor compliance with safety requirements including Accident Prevention Plans (APP), Asbestos Hazard Abatement Plans (AHAP), and site-specific protocols., • Issue Special Work Permits and ensure safety and coordination when work is performed in energized substations or sensitive areas., • Process Requests for Information (RFIs), assist in resolution, and track follow-up in coordination with WAPA’s construction staff., • Draft inspection-related correspondence, field memos, and issue logs for internal WAPA review and approval., • Support field cost estimate development and analyze contractor change proposals as needed., • Maintain updated “as-built” documentation and track changes throughout the project life cycle., • Minimum of 5 years of experience inspecting and working on construction projects involving transmission lines, civil works, buildings, substations, or commercial/industrial infrastructure., • Hands-on knowledge of grading, excavation, reinforced concrete, structural steel, welding, HVAC, plumbing, high voltage equipment, grounding and switching, asphalt paving, and building electrical systems., • Surveying experience capable of verifying site grades and elevations., • Strong oral and written communication skills for reporting, coordination, and interacting with contractors, WAPA personnel, and other stakeholders., • Proficient in evaluating detailed cost estimates and contractor proposals, including breakdowns of labor, equipment, materials, overhead, and profit., • Skilled in identifying, defining, and documenting scope changes due to owner direction or differing site conditions., • Experience supporting or conducting technical negotiations with contractors, including scope, cost components, and terms., • Proficient in reading, interpreting, and understanding civil, electrical, mechanical, structural, architectural, and geological construction drawings and specifications., • Capable of reviewing and evaluating payment requests against completed work and contractual milestones., • Written and verbal communication, problem-solving, and conflict resolution skills, • Strong computer and technology literacy to utilize PCs and mobile devices., • Knowledge of software including MS Suite (including MS Project), Adobe Acrobat, and any other software programs typically utilized., • Maintain a valid driver's license., • CPR, First Aid, and AED certification., • Ability to multi-task and prioritize in a fast-paced work environment on large, complex construction projects., • Ability to walk or climb on a daily basis to observe contract performance., • Must be able to physically operate a motor vehicle without danger to self or to others., • Familiarity with safety standards, including fall protection and Job Hazard Analysis (JHA) processes., • Experience monitoring safety meetings, reviewing safety plans, and enforcing compliance with Accident Prevention Plans (APP) and site-specific safety protocols., • Capable of identifying unsafe conditions and issuing stop-work orders when required., • Experience working on federally funded projects or within historic and environmentally sensitive sites strongly preferred, • Familiarity with Western Area Power Administration’s construction standards, drawings, safety standards, and federal government construction contracts is preferred., • Knowledge of power industry equipment and electrical infrastructure is preferred., • Thorough understanding of OSHA 1910 and 1926 Construction Industry regulations, National Electrical Safety Code (NESC), National Electrical Code (NEC), and applicable building codes preferred, • Three options for medical plans plus dental and vision insurance offerings, • 24/7 healthcare access to telehealth services for your convenience, • HSA, • Company life insurance options for you and your family, • Short-term and long-term disability offerings, • PLUS an $800 monthly allowance is provided to offset your PSI insurance premium costs, • 401(k) with a 4% employer match, • Generous PTO, paid-federal holidays, and sick leave Project Solutions, Inc. is an equal opportunity employer, women, individuals with disabilities, protected veterans and minorities are encouraged to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. EEO/M/F/Vets Powered by JazzHR jGk7skUN1i

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. ELECTRICAL ENGINEER I/II PIPELINE Based at Rocket Lab's global headquarters in Long Beach, CA, we are looking for an Electrical Engineer I/II for a future opening who will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed (Please note: this position can be hired at the Electrical Engineer I or Electrical Engineer II level) YOU'LL BRING THESE QUALIFICATIONS AS ELECTRICAL ENGINEER I: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • U.S. citizenship required, due to program requirements YOU'LL BRING THESE QUALIFICATIONS AS ELECTRICAL ENGINEER II: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 2+ years of electrical hardware design experience, including schematic capture and PCB layout, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • Proficiency with Altium Designer for schematic capture and layout of complex PCBs, • Knowledge with processors, FPGAs, switch mode power supplies, communication interfaces and analog instrumentation, • U.S. citizenship required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$85,000—$120,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Join our D.R.I.V.E.N Team at Satellite Management! At Satellite Management, we recognize that our associates are the foundation of our success. We are committed to delivering outstanding services to our customers while fostering an environment that encourages growth and opportunity. Our Apartment Community in Fullerton is currently seeking a talented Maintenance Technician Lead to be part of our dynamic team. If you are looking for a rewarding career with a company that values your contributions, we invite you to apply and help us drive excellence together! Pay Scale: $25.00 - $28.00 per hour Benefits Include: Wellness · Medical – Blue Cross and Kaiser Permanente Offered, Dental, Vision, including Telehealth support · Company paid Life, AD&D, Short-Term Disability and Long-Term Disability Insurance · Option of Health Savings Account (HSA), and Flexible Spending Accounts (FSA) · PTO Program (10 days, annual accrual) · 7 Company Paid Holidays · Employee Assistance Program (EAP) Financial · 401(k) match program 4% · 401(k) Immediate vesting · Referral Bonuses · Annual compensation review Development · Professional development and training opportunities · Cross training opportunities · Tuition reimbursement for courses related to real estate licensing for selected positions · Annual performance reviews The Maintenance Technician Lead is responsible for diagnosing maintenance issues, making repairs, and completing maintenance requests in a timely manner. The Maintenance Technician Lead will also be responsible for maintaining the overall condition of the apartment community including the grounds and common areas and to provide a quality living environment for residents. Successful Maintenance Technicians will be customer service focused, possess a sense of urgency, and be responsive to resident and team member needs. Primary Duties and Responsibilities: · Performs maintenance duties including work orders and preventative maintenance activities, with minimal supervision consistent with company policies and procedures and direction from supervisor(s), completes documentation and necessary paperwork in a timely, accurate, and complete manner to document and track maintenance activities · Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, and other miscellaneous maintenance and repairs necessary or directed · Maintenance of grounds, common areas, and amenities by picking up trash and debris, pressure washing breezeways and commons areas, general cleaning as needed and other areas as directed · Compliance with company standards and applicable laws including but not limited to; Fair Housing, OSHA, Landlord Tenant, Local Building Codes, OSHA, and EEOC. Attend and participate in company safety meetings and required trainings and other safely related laws and requirements, and by reporting accidents and incidents promptly in an accurate manger · Report known safety hazards, equipment, and customer concerns to supervisor · Respond quickly to emergency situations during work hours and on-call coverage on site location where living when housing agreement applicable · Follows established process for inventory of supplies and materials at the community, by tracking inventory used, returning unused inventory, and notifying supervisor about re- ordering needs. Supports cost saving initiatives by fixing rather than replacing parts when possible and not being wasteful with materials and supplies · Maintains high levels of customer service for prospects, residents, vendors, and associates · Perform other duties as assigned Skills: · Ability to effectively communicate with residents, vendors, and individuals across the organization, includes ability to communicate effectively in English · Proficient knowledge of electrical, plumbing, appliance repair, and basic hand/power tools · Knowledge of environmental hazards including asbestos, lead based paint, moisture intrusion, and radon · Ability to be “on-call” at work site location where housing agreement applicable when requested and respond promptly to service emergencies · Basic Computer Skills required to place online orders, respond to emails, take company trainings, access timecards, and access companywide emails

Job Description Control System Engineer - REMOTE (Location specific – must reside in SoCal or near Orlando, FL) Thriving systems integration company in Orange County, CA, catering to food and beverage automated manufacturing market, needs an experienced Controls Engineer. Qualified candidates will have the opportunity to develop their technical skillset across a broad range of automation technology, work in a variety of industrial environments for numerous Fortune 500 companies and develop industry-specific expertise. The company culture encourages a strong work/life balance, providing a flexible schedule and the opportunity to work remotely. Base salary + Bonus + Benefits + 401K + Travel time pay on top of salary! Only 15% overnight travel, the rest is regional and will have you sleeping in your own bed at night! Job Location: Work remotely in Southern CA or Orlando, FL Earn travel time pay on top of salary for local travel! Responsibilities: • Experience with creating and editing electrical drawings and CAD software such as Eplan or AutoCAD Electrical, • Knowledge of practical/fundamental wiring practices for industrial control systems up to 600VAC motor power circuits, controls, discrete and analog signaling devices., • Experience in electrical control system design and engineering for machinery, including programming, start-up and debugging processes., • Experience with PLC Logic using Rockwell, Beckhoff, Siemens, ABB or equivalent., • Experience with Factory Talk ME/SE/Optix and other HMI products., • Experience with ISO13849 and Functional Machine Safety, • Perform onsite programming and electrical troubleshooting service calls with existing automation equipment including VFDs, Servo Drives, PLCs, HMIs, Sensors, Relays, Motors, etc., • Manage automation project complete lifecycle, • Comfortable working with a variety of automation hardware and software platforms, • Develop electrical Bill of Materials and appropriately size electrical components in a controls enclosure, • Create controls architectural layouts, • Interpret and redline electrical schematics, • 3-5 years of experience as a controls engineer, • Engineering Degree, • Strong understanding and the ability to develop PLC & HMI applications, • Proven collaborator; able to leverage individual strengths to provide value to the entire team and customers, • Excellent verbal and written communication skills, • Write detailed service reports, • Ability to read, markup, and modify electrical schematics in .pdf format, • Hands-on experience with low voltage (480V and below) electrical applications, • Experience with the following automation disciplines: PLC Programming / HMI Development / Variable Frequency Drives / Motion Control / Industrial Networks / Sensors, • Ability to develop and grow strong customer relationships, • Consistently takes initiative and efficiently manages schedule, • Solid problem-solving skills and displays acts of resourcefulness

Job DescriptionWho We AreWith a legacy spanning four decades, Action Property Management has become the premier choice for homeowner’s association management. Founded in 1984, Action began with a single client and a vision to elevate ethical and professional standards in the HOA industry. Our unwavering commitment to integrity, and professionalism coupled with our core values of excellence, innovation and care for people, continues to define us. Today, as the largest privately owned HOA management company in the West, we proudly serve over 300 communities across 9 offices. Our success is fueled by a team of nearly 900 dedicated team members who genuinely love what they do and are dedicated to helping homeowners thrive and love where they live. Job SummaryThis position functions as a Painter and performs skilled work involving the maintenance and repair of the building. The Painter is responsible for maintaining, correcting deficiencies, and/or making repairs to all "common areas" within the Association, as defined in the Association's governing documents. The Painter shall oversee and coordinate the safe and efficient operation and maintenance of all necessary building systems, and shall possess a basic understanding of all systems servicing standard residential units. Compensation: $21.00 hourly, plus benefits Schedule: Monday- Friday from 8:00 am - 4:30 pm What You’ll Do (Job Duties)Performs all types of commercial painting workPrepares various surfaces for painting by washing, scraping, burning, sanding, sandblasting or other means as necessaryMixes, matches, and blends various paints, enamels, lacquers, varnishes, stains and special protective coatings to achieve desired color, consistency, and drying propertiesCaulks, putties, cements or plasters holes and cracks. Cuts and replaces glass in windows and doorsErects and uses ladders, scaffolding, and swinging stage equipment as requiredPaints buildings, structures, equipment, and furniture using brush, spray gun or other applicatorPrepares wall and hangs paper or other wall covering materialDetermines quantities and requests supplies orally or in writingCleans and stores tools and equipment and cleans work sitesOversee all facets of the daily operations of the building, ensuring compliance with HOA policies and regulations as required by code and regulatory enforcement agenciesMonitor and maintain optimum performance of all building systems to include mechanical, electrical/electronic, fire life safety, smoke control, security, HVAC and water circulation systemCoordinate and interact with external contractors and vendorsImplement preventative maintenance programs Who You Are (Skills/Experience)Painting experience in a luxury high-rise community or hotelHOA experience is a plusStrong verbal and written communicationTeam player attitudeMust be available by cell phone 24/7 for emergenciesHVAC certificate and EPA/608 License is a plusFamiliarity with the Uniform Commercial Building Code is a plusFamiliarity with boiler and chiller repairs is a plusFire system management experience is a plus Why You'll Love Working at ActionAt Action Property Management, we believe in creating an environment where you truly love where you work. We offer competitive pay and ample opportunities for career growth and advancement. Our comprehensive benefits package includes medical, dental, vision, pet insurance, 401(k) with company match, and life and disability support for qualifying team members. We also provide generous paid time off, including vacation hours, sick time, and company-observed holidays for qualifying team members. We are committed to investing in the infrastructure, technology, training, and tools you need to excel in your role. Our relentless dedication to our company values and culture ensures a workplace where you feel heard, supported, and valued. Join us at Action Property Management and make a meaningful impact. Action Property Management is an Equal Opportunity Employer and Supports a Drug Free Workplace. Pursuant to the San Francisco and Los Angeles Fair Chance Ordinance, we will consider qualified applicants with arrest and conviction records. #LI-DA1

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR RF DESIGN ENGINEER I/II We are currently seeking a Senior RF Design Engineer I/II based onsite at Rocket Lab's global headquarters in Long Beach, CA. The Senior RF Design Engineer will be responsible for supporting the development of new RF products including Rocket Lab's radio product line alongside the radio development team. The Senior RF Design Engineer will design and simulate RF products including the Frontier-Lite Radio. The successful candidate will have a strong combination of RF engineering, system design, and board/circuit design skills and will thrive in a fast-paced, dynamic environment. WHAT YOU'LL GET TO DO: Product Development • Define and maintain requirements specifications, • Support the development process, ensuring key design decisions and developments are in alignment with the required product capabilities, • Design and prototype the RF product including component selection and PCB layout / fabrication / packaging, • Support the development of test plans and procedures, • Support the design and development of GSE and production automation, • Support the development of product documentation including ICDs and User Manuals, • Liaise with Test Engineers and Manufacturing Engineers to drive New Product Introduction Customer/Program Support • Review proposals and requirements specifications to assess compliance based on existing unit capabilities vs development needs, • Scope and drive development activities for new requirements, • Support engineering reviews such as PDRs, CDRs and TRRs, • Provide technical support to internal/external customers including general questions and anomaly troubleshooting, • Maintain broad awareness of product development and production schedules to ensure the needs of customers and programs are satisfied This position can be filled at a Senior RF Design Engineer I or a Senior RF Design Engineer II level. YOU'LL BRING THESE QUALIFICATIONS FOR A SENIOR RF DESIGN ENGINEER I: • Bachelors degree in electrical engineering, RF communications (or other engineering degree) and 5+ years of relevant experience, • U.S. citizenship required due to program requirements, • Fundamental RF knowledge including cascaded device analysis, link budget analysis, and HFSS, • Experience in developing and delivering a RF product including assessing requirements, prototyping engineering models, and producing space worthy products., • A solid theoretical and practical understanding of RF communications and navigation systems and components YOU'LL BRING THESE QUALIFICATIONS FOR A SENIOR RF DESIGN ENGINEER II: • Bachelors degree in electrical engineering, RF communications (or other engineering degree) and 8+ years of relevant experience, • U.S. citizenship required due to program requirements, • Fundamental RF knowledge including cascaded device analysis, link budget analysis, and HFSS, • Experience in developing and delivering a RF product including assessing requirements, prototyping engineering models, and producing space worthy products., • A solid theoretical and practical understanding of RF communications and navigation systems and components THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Extensive experience in space grade board design including parts selection and performance simulation, • Extensive experience in circuit analyses including worst case, reliability, FMECA, thermal, and derating analyses, • Extensive experience supporting and leading complex engineering programs and developing associated documentation, • Experience designing, integrating, and testing RF communications systems for launch vehicles or satellites, • Demonstrated expertise in people management., • Experience leading incident management and investigations., • Experience in conflict resolution and dealing with difficult people., • The ability to work under pressure and to tight deadlines, • Effective communication skills and the ability to build strong working relationships, • Project management experience ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$130,000—$190,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation Registered Nurse Float Pool will provide nursing care to wide variety of patients within Tucson ER & Hospital. During every shift, the Registered Nurse Float Pool will be a member of a nursing team that provides direct nursing care to a specific unit within the hospital. It is quite conceivable that a Registered Nurse Float Pool may start their shift in one unit and then based on a change in census and acuity be transferred or moved to a different unit to meet operational requirements. However, it is possible that a Registered Nurse Float Pool may spend extended periods of time in one nursing unit to help balance off long-term absences (i.e. illness, holidays, maternity leave, etc.). While working within a nursing unit the Registered Nurse Float Pool acts as a patient advocate and facilitates communication between the patient, family and other health care professionals. This will result in a holistic approach to planning, organizing, teaching and relationship development that will best meet the needs of the patient. Based on patient census and acuity throughout Tucson ER & Hospital the incumbent may be required to provide standardized nursing care to any and/or all of the nursing units within the scope of a RNs practice. This scope includes medical-surgical, telemetry and acute care (i.e. emergency department). Position Requirements: Graduate of an accredited school of nursing with current licensure with the State Board of Nurse Examiners. License must be in good standing. 2-year minimum RN staff experience in medical/surgical or telemetry environment. In addition, the Registered Nurse Float Pool must be able to acquire within a reasonable time frame and remain current with the following training appropriate to their areas of specialty which include but are not limited to: - Emergency drugs - IV therapy - Electrical Defibrillation - Cardiac Monitoring - ECG - Ventilator - Hemodynamic Monitoring - Demonstrates an aptitude and willingness to learn new responsibilities - Excellent verbal and written communication skills - Excellent organization, interpersonal, and customer service skills - Ability to work independently, make decisions, meet deadlines, multi-task and solve problems; working under a moderate to high degree of pressure - Proficiency in PCsoftware, especially word processing and spreadsheet programs - Experience with a hospital-based computer system Primary Responsibilities 1. The Registered Nurse Float Pool provides direct nursing care to a wide variety of patients requiring continuous 24-hour medical and nursing treatment using a problem-solving approach and in accordance with the standards, guidelines and scope of professional nursing practice to facilitate individualized nursing care to the patient. The Registered Nurse Float Pool will: - Assess, plan implement, document and evaluate care to ensure a coordinated holistic approach which best meets the needs of the patient. - Assist patients to achieve their optimum level of health in situations of normal health, illness injury or through the process of dying - Advocate the dignity and self-respect of patients - Promote the autonomy of patient and help them to express their health needs and values to obtain appropriative information and services - Safeguard the trust of patients that information learned in the context of a professional relationship is shared outside the health care team only with the patients permission or as legally required - Apply and promote principles of equity and fairness to assist patients in receiving unbiased treatment and a share of health services and resources proportionate to their needs - Act in a manner consistent with their professional code of ethics, responsibilities and standards of practice 2. The Registered Nurse Float Pool facilitates, implements and modifies patient and family education/ teaching based on the needs of the patient. The Registered Nurse Float Pool will: Use a holistic approach to facilitate individual learning of patients and their families upon admission and transfer or discharge in relation to patient illness or injury (i.e. self-care, health promotion, etc) Qualifications • Currently licensed Registered Nurse (RN) in state of employment, • Previous experience as a Registered Nurse is preferred, • Excellent interpersonal and client care skills, • Valid drivers license, • First aid/CPR certification required

Job Description Company Description Palmetto is a leading clean tech company on a mission to accelerate the transition to a clean energy future. With a belief that consumers can have it all, we are an uncompromising energy company that makes coming clean a no brainer. Our award-winning technology platform empowers homeowners, businesses, and entrepreneurs to adopt renewable energy through simple, scalable, and innovative solutions. Operating at the intersection of B2B and D2C, we offer software, financial products, and services that drive real environmental impact—without compromising value. We deliver end-to-end solutions for whole home electrification that put clean energy within reach for all. Our employees are our most valuable resource. We foster a promote-from-within culture that prioritizes talent development, career growth, and purpose-driven work. Palmetto offers a comprehensive benefits package—including unlimited PTO, medical, dental, and vision coverage, paid parental leave, retirement plans, and more—so you can have it all both personally and professionally. Palmetto prioritizes people, planet, and profit—backed by a culture that values collaboration, impact, and balance. Join us in building a brighter, cleaner world. Location This role will be based regionally in the Southwest US (Arizona preference). Reporting This position will report to the Strategic Accounts Director, HVAC. Summary of Role The Channel Account Manager, HVAC/Heat Pump and Home Electrification is a partner-facing role focused on helping home service contractors adopt and scale Palmetto's LightReach Finance program. You will be responsible for onboarding contractor partners, training their sales teams, and supporting successful in-home sales adoption. In the early stage, this role will focus heavily on top of funnel partner relationship building and recruitment of new partners. Over time, the role will become more focused on partner support and enablement, and is ideal for someone who has worked in residential in-home sales and understands how homeowners make decisions around major home upgrades. You should be confident leading live sales trainings, coaching front-line sales professionals, and providing ongoing field support. Strategic & Tactical • Identify, recruit, and onboard new partners based on Palmetto LightReach business objectives., • Serve as the primary point of contact for assigned contractor partners across residential home services trades., • Lead on-site and virtual trainings for sales reps on how to position, present, and close the LightReach program in the home., • Collaborate with Sales and General Managers to drive alignment and adoption at the leadership level., • Support sales teams through ride-alongs, objection handling, and in-home pitch coaching., • Monitor LightReach activity, adoption rates, and engagement metrics; proactively address friction points., • Partner with internal teams to refine tools, resources, and partner support processes., • Gather field-level feedback to inform platform improvements and partner enablement content., • Ensure a high level of professionalism and partner satisfaction across every touchpoint.Required Experience, • 3–5 years of experience in residential in-home sales (HVAC, plumbing, electrical, generators, roofing, or similar), • 2–4 years in a partner-facing or field enablement role (Sales Trainer, Territory Manager, Manufacturer Rep, etc.), • Demonstrated ability to train and coach salespeople in person and virtually, • Experience working with or for contractor businesses in the home services industry, • Strong presentation, relationship-building, and problem-solving skills, • Willingness to travel up to 75% regionally/nationally, • HVAC Experience is requiredSuccess Defined, • New Contractor onboarding., • Grow LightReach adoption and transaction volume among assigned partner accounts., • Improve frontline sales team confidence and accuracy in presenting the LightReach Program., • Shorten time-to-productivity for new contractor partners. Equal Employment Opportunity Palmetto embraces diversity and is an Equal Employment Opportunity employer. Employment is decided on the basis of qualifications, merit, and business need. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or any other status protected under federal, state, or local law. For more about our Privacy Policy, visit:

Job DescriptionRainmaker is pioneering a modern cloud seeding system to solve water scarcity and inclement weather problems. We develop and incorporate radar validation, weather-resistant UAS, numerical weather modeling, and sustainable cloud seeds into an effective precipitation enhancement solution. The Field Scientist is responsible for the installation, maintenance of meteorological instrumentation and data collection systems. The role also involves quality control, data wrangling, and scientific analysis and novel algorithmic development using the various datasets . This role requires a strong understanding of meteorological principles, electronics, and data acquisition systems. The specialist will work closely with meteorologists, engineers, and technicians to ensure the accuracy and reliability of collected data. Additionally, the specialist may be involved in scientific research projects and contribute to publications.What You'll Do • Scientific algorithm development: Stay up-to-date on the latest advancements in meteorological instrumentation technologies, data collection and quality control, and sensor fusion algorithms. Research and implement methods and techniques to optimally utilize the data streams toward informing precipitation enhancement operations and validation., • Precipitation Enhancement Operations: Assist in precipitation enhancement operations, including preparing equipment, monitoring weather conditions, and deploying seeding agents. Collect and analyze data during and after precipitation enhancement events to evaluate the effectiveness of the operations., • Installation: Install a variety of meteorological sensors, including cloud radar, lidar, sounding packages, and sensors for variables of state. Mount and configure sensors according to manufacturer specifications and project requirements. Install data loggers and communication systems to transmit data to a central location., • Maintenance and repair: Perform routine maintenance on meteorological equipment, including cleaning, calibration, and troubleshooting. Inspect sensors and data loggers for damage or wear and work with the manufacturers to get sensors repaired. Test the accuracy of instruments using standardized procedures. Diagnose and repair faulty meteorological equipment. Troubleshoot electrical and mechanical problems. Replace damaged or defective parts to maximize continuous operations.., • Data Quality Control: Monitor data quality and identify any inconsistencies. Investigate and resolve data quality issues. Ensure the integrity of collected data. Develop software processes to automate quality control workflowsWork with software engineers for proper sensor data handling, • Documentation: Maintain detailed records of equipment installations, maintenance, and repairs. Prepare reports on the status of meteorological instrumentation and data collection systems., • Training: Provide training to other staff members on the proper use and maintenance of meteorological equipment.Required Qualifications, • At least a Bachelor's degree in meteorology or atmospheric science., • Strong understanding of meteorological principles and instrumentation., • Experience with data acquisition systems and data analysis techniques., • Ability to assimilate previous research concepts and develop novel applications., • Programming skills (especially Python, but MATLAB, R, and similar are acceptable)., • Experience developing workflows for real-time scientific instrumentation data sources., • Knowledge of electronics and electrical circuits.No recruiting agencies

Job DescriptionGK is recognized by the Los Angeles Business Journal as one of theMost Influential Family-Owned Businesses in Los Angeles Goldrich Kest (GK) is a diversified real estate development and management group of companies and partnerships. Its focus is to expand its portfolio of proven and well-located properties including multi-family, industrial, retail, commercial and congregate care through acquisition and development while providing stable cash flow to its partners and outside investors. Position Information: • Salary Range: $27 – $31 hourly (DOE), • Work Schedule: Monday – Friday (8:00am – 5:00pm), • Apartment Unit: This position does not come with a comped apartment unit. Under the Supervision of the Community Manager, the Maintenance Manager is responsible to maintain the overall appearance and maintenance needs of the community. Responsibilities include curb appeal; supervise the maintenance staff; coordinate make-readies and move ins/move out schedules; perform general maintenance repairs; conduct preventative maintenance and oversee the construction/rehabilitation needs of the apartment community. The selected candidate will collaborate with the Community Manager for the overall property in order to assist the leasing staff in achieving the overall occupancy goals, and for assisting in resident retention by providing a quality living experience for the residents. Essential Functions: This job description should not be interpreted as all inclusive. It is intended to identify the essential functions and requirements of this position. The incumbent may be requested to perform job-related responsibilities and tasks other than those stated in this job description. • Direct and supervise the daily activities of the property’s maintenance team. Apply GK policies and procedures to all maintenance operations of the community., • Prioritize work assignments and evaluate job performance of maintenance associates. Ensure all work is completed according to GK standards., • Collaborate with the Community Manager to coordinate the move-in schedule and ensure the timeliness and effective completion of all repairs in preparation for all new residents. Unit turns need to be completed in 5 days., • Perform, schedule and supervise maintenance repairs throughout the property including the common area amenities, resident occupied units, and vacant units in preparation for new resident move-ins., • Work with vendors to coordinate repairs. Ensure quality work is completed., • Assist Community Manager in obtaining proposals from vendors as needed., • Manage open service requests through Onesite. Work orders need to be completed in 24-48 hours., • Communicates with the Community Manager regarding the status of work and any potential issues, reporting anything that may be a potential liability., • Budget and maintain an up-to-date supply inventory on all equipment, tools, and supplies for the property., • Schedule, monitor and conduct preventative maintenance on various equipment, electrical and plumbing systems, HVAC, swimming pool(s), carpentry, dry wall, exterior structural and appliances., • Performs common area painting., • Conducts monthly lighting inspections and replacements of lights where needed., • Completes monthly and annual inspections on time. Follow up on any issues needing improvement., • Keep work areas, maintenance shops, storage areas, equipment clean, and well organized., • Consistently maintains a clean and attractive environment around the leasing office, clubhouse, pool, and all common areas., • Picks up trash on the property and in common areas, which includes but is not limited to, driveways, parking lots, curbs, trash receptacles areas, exterior hallways, breezeways, laundry rooms, mailrooms, and any other public areas., • Walks the property several times a day and picks up new debris, including pet waste. Ensures pet stations are stocked and emptied at all times., • Maintains the property’s flowerbeds, plants, and grass area, including pool cleaning or routine pool maintenance (including pool furniture)., • Maintains clean laundry rooms, mailrooms, doors, and light fixtures throughout property, as directed., • Ensure policies and procedures as well as safety and compliance expectations are met., • Reports to Community Manager any inoperable vehicles on property, leaks, mold, injury, criminal activity and ensures incident report is submitted immediately., • Provide safety training and instruction for newly hired maintenance associates., • Participate in safety meetings and perform all work duties in a safe and efficient manner, in accordance with company safety policies., • Respond promptly to resident complaints, concerns and requests., • Provide input to the Community Manager for performance reviews for community maintenance associates., • Comply with GK Management career apparel requirements and require compliance of maintenance associates., • Lead, motivate and develop a successful staff., • Comply with GK’s key control policy by all maintenance associates, vendors, and contractors. All keys must be secured and no keys can be taken home with authorization from GK Management., • Presents a professional, efficient attitude to ensure resident satisfaction while working within company guidelines., • Ability to interact effectively with management, co-workers, visitors, and residents., • Superior customer service skills., • Strong attention to detail, organizational, time-management, and problem solving skills., • Ability to work independently., • Ability to read/ speak/ write English language proficiently., • Intermediate computer knowledge., • Ability to perform professional level maintenance services., • Knowledge of and ability to use simple tools and equipment. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 60 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions The majority of the work day is spent indoors performing repairs inside of apartments and when performing computer related work. Exposure to seasonal temperatures occurs during summer and winter months. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team and pushing the boundaries of humanity with a clean sheet, reusable launch vehicle, this is your opportunity! MECHANCIAL ENGINEER II - NEUTRON AVIONICS Based out of Rocket Lab's headquarters in Long Beach, CA, the Mechanical Engineer II, Neutron Avionics, is responsible for the development and implementation of mechanical designs and packaging solutions for the electronics that power Neutron. From cradle to grave, you will create the mechanical components that enable the avionics across the vehicle, including on the Archimedes engine, GNC sensing and computing, and the explosive flight safety system, to reliably operate in extreme launch vehicle environments across many re-flights. Working with fellow avionics designers, you will develop innovative solutions to integrate the avionics, optimizing for cost, mass, and production rate. You will be part of a small, agile, and effective US-based avionics team that works hands-on with the physical flight hardware on the production floor and at the launch site. The ideal candidate will be experienced in mechanical and structural design, electronics packaging, and environmental survivability. You will collaborate with a range of cross-functional teams, including local propulsion and fluids systems, electrical design, vehicle integration, and testing sites – both local, national, and global – for the upper-level assemblies. You will experience vehicle hardware transform from prototype to production, through various test sites, and ending at the launch site with the full Neutron coming together. WHAT YOU'LL GET TO DO: • Development of mechanical components and electro-mechanical systems. Includes mechanical design, prototyping, production, test and integration. Execute multiple design iterations in efficient manner, while leveraging technical experience to clear short-term issues and long-term roadblocks. Own the hardware delivery timeline through inception, design, assembly, and test., • Support and execute hardware testing, including system-level performance validation, Archimedes hotfires, integrated vehicle stack tests, and explosive/destructive qualification., • Analysis of electro-mechanical and structural assemblies via classical and computer methods. Assess and optimize for downstream performance of physical events being driven and usage across the lifetime of the rocket., • Contribute to the future, reusable vehicle architectures. Optimize the designs, implementation, and operation to achieve hands-off reusability between flights., • Bachelor's degree in Mechanical Engineering, Aerospace Engineering or equivalent., • Professional experience with NX, Ansys, or similar tools., • Experience designing things for stressing thermal and dynamic environments., • Strong fundamentals in mechanical design, 3D modeling, finite element analysis (FEA), and manufacturing drawing creation (GD&T)., • Professional experience working with avionics designers and exposure to electronics integration and packaging., • Experience with best practices for design, qualification, and production of avionics systems and electro-mechanical components for launch vehicles., • Experience with Python or similar software languages and integration., • Experience with an agile development environment., • Experience vibration and shock testing avionics, sensors, or similar components., • Experience with HASS/HALT, HITL testing electronics and designing test support hardware., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$100,000—$125,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Build Your Future with Luxury Bath Designs of Orange County! Are you a skilled, hardworking, and honest individual ready to take your home remodeling career to the next level? The new, exclusive dealer for Luxury Bath is open in Orange County and is looking for passionate installers who bring value, talent, and dedication to every project. We recognize and respect your skills and are excited to welcome you to our growing team! What We Offer: • A supportive, upbeat culture that prioritizes both customer and employee satisfaction, • Opportunities for growth, training, and advancement in a respected and professional environment, • Competitive compensation that reflects your experience and dedication Required Skills and Qualifications: • Bathroom remodeling skills, including:, • Plumbing, • Acrylic wall systems, • Custom base installations, • Vanity and countertop installations, • Must have valid driver's license, • Must have own truck and tools Optional Skills and Qualifications: • Basic electrical (installing exhaust fans, light switches, etc.), • Flooring installations, • Lighting installation, • Tile installation Whether you have experience in one or all of these areas, we value your dedication to quality and are willing to train the right person to expand their skills in any of these areas. Why Luxury Bath Designs of Orange County? We’re a company with a vision, focusing on top-quality workmanship, professionalism, and care in every project. Join a team that values you, supports your growth, and offers the chance to enhance your skills in a company that truly appreciates its team. Apply today if you have all or some of these skills and want to join a company that respects the hard work you bring to the table. Let’s create beautiful, lasting bathroom spaces together! Email your resume or contact information to If you have your own installation team or any referrals, please include this information along with your resume. We look forward to meeting you! luxurybathdesigns.com Luxury Bath Designs of Orange County 4510 E La Palma Ave unit 100 Anaheim Ca 92807 Powered by JazzHR s1h3nuUQDS

Job Description Mission Statement The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the gospel of Jesus Christ and to meet human needs in His name without discrimination. Position Summary The Head of Maintenance assists and carries out the direction of the Operations Manager for the day to day operation and upkeep of all camp property. He/She is directly involved in the maintaining camp property including involvement in maintenance needs, landscaping, property upkeep and guest group set ups and cleaning. Essential Functions • Encourage the professional and spiritual growth staff under your care., • Develop work schedules for maintenance staff to ensure appropriate and efficient operation., • Report to the Operations Manager any missing or damaged property, equipment, or housekeeping goods., • Ensure all areas of camp are cleaned regularly and landscaping is properly maintained., • Maintenance related tasks including but not limited to the following:, • Trash runs, clean and set up rooms, move furniture and sound equipment, • Mop floors, clean bathrooms, attend other basic bathroom needs, • Work with Guest Service Manger to gather schedule for guest groups, • Ensure set ups, cleaning, and trash runs are always done in a timely manner., • Be aware and make necessary changes to hazards found on campgrounds., • Assist in repairs of buildings, facilities and equipment., • Utilize upkeep software to accomplish normal maintenance tasks and preventative maintenance items., • Specialized Equipment: may be asked to use a variety of equipment such as lawn mower, weed eaters, saws, ladders, pressure washer, non-power shop tools, etc, • This position also will assist with group hosting to ensure group needs are always taken care of. The head maintenance position has a variety of responsibilities revolving around property/maintenance upkeep and guest group set up’s/ tear downs. • Property/Maintenance Upkeep, • Work with Maintenance Staff to ensure the maintenance and repairing of all Plumbing, Electrical, Building repair, Pool maintenance, Vehicle upkeep, Shop cleanliness and organization, & landscaping needs., • Guest Group Set ups and tear downs –, • Directly responsible to ensure that all set-ups for guest groups are accomplished. This includes proper cleanliness of all buildings used by guest groups. Also responsible for properly cleaning meeting spaces after groups leave the site including all trash runs. Ability to walk, stand, bend, squat, climb, kneel and twist on an intermittent or sometimes continuous basis. Ability to grasp, push, pull objects such as files, file cabinet drawers, and reach overhead. Ability to operate computer, fax and telephone. Ability to lift up to 50 lbs. Minimum Qualifications • Ability to effectively communicate orally and in writing, • Visual and auditory ability to identify and respond to environmental and other hazards of the site and facilities, camper and staff behavior., • Physical mobility and endurance to perform tasks while standing or walking for long periods of time (60 minutes or more), • Physical ability to respond appropriately to situations requiring first aid. Must be able to assist guests in case of emergency., • Operate with daily exposure to the sun, heat and other environmental conditions., • Knowledge of The Salvation Army mission, philosophy, culture, protocol and organizational structure., • Must have the ability to work well independently in a detailed, professional and courteous manner., • Combination of college education, training and experience in the camping industry., • Friendly and personable. Excellent customer service skills required., • Must be 21 years or older., • A team player, must work well with others., • Experience in supervision of staff., • Must have good communication skills and pay close attention to detail., • Required to have a thorough knowledge of building policies, procedures and event requirements., • Possess a valid CA driver’s license.

Job DescriptionDescription: Become the Best Part of PMP Management! PMP is seeking a motivated, detailed, communicative, and personable professional to join our team as the Division Manager – Building Engineering, PMP Urban, Los Angeles, CA. Who We Are Property Management Professionals LLC. (PMP) is an industry leading Association management firm providing extraordinary services to common interest developments throughout Southern California, Texas, Arizona, Utah, and Colorado. PMP delivers a level of service only a local management partner can, with the depth and breadth of support and training only seen at much larger management firms. PMP is one of the fastest growing management firms in each of our respective submarkets, which provides our team members’ a unique opportunity to develop and grow their careers. Our people-centric culture attracts and retains the industry’s top talent and has served as one of our competitive advantages, driving our growth and success over the past decade and a half. To learn more about PMP and our unique company culture, we invite you to visit our social media platforms below: Instagram/pmpmanage facebook/pmpmanage linkedin/company/pmpmanagement Who We’re Looking For PMP is looking for energetic, passionate, personable, and detail-oriented professionals to join our growing team. The right candidate will embrace change, celebrate innovation, and have an unwavering passion for providing extraordinary customer service to our valuable clients. Position Description: PMP’s Division Manager – Building Engineering is responsible for providing support to the on-site management teams in the Urban Division; a division dedicated to mid and high-rise buildings with on-site staff and lifestyle centric service. The position is a hybrid-remote roe that will require work in the divisional office, on-site at properties, and work from home. The ideal candidate will possess strong leadership and communication skills, extensive financial and budget experience, a detailed knowledge of building maintenance, a positive demeanor with a passion providing extraordinary customer service. Duties & Responsibilities: • Scheduled property visits for direct collaboration with on-site General Managers and to conduct maintenance and compliance tours, • Working with the on-site maintenance staff to create and implement a preventative maintenance schedule to for the building’s components, softscapes, and hardscapes, • Working with the on-site teams to ensure the progress of work on the Action Item Tracker is effectively communicated and advanced, providing direct project support s needed, • Work with on-site General Managers and contractors to develop project scope and expectations, • Working with on-site team to keep Association books and records organized and concise, both electronically and hard copies as required by law, • Assist General Managers and the association legal counsel with the workflow and communication of legal proceedings, • Prepare annual operating budgets and manage expenses within cost projections, • Review and apply GL code to invoices for accurate financial recording, • Prepare Association related communications as necessary and ensure postings to meet state civil statutes, • Work with general contractors and vendors on large scale repair and maintenance projects to ensure project scope, milestones, and expenses meet expectations, • Assist Senior Leadership on all Association projects, • Be available to address after hour’s emergency matters, • Secure vendor estimates/bids, scheduling work, and tracking progress of all maintenance and repairs items, • Participate in on-going training and professional development, • Process work orders and track all maintenance and repair items through fruition, • 4 Year College Degree, • Association industry credentials preferred, i.e. CACM, AMS, CCAM, • 5-10 Years of experience as an on-site Building Engineer, Division Manager or experience in a similar role, • Extraordinary customer service skills, • Exceptional writing and communication skills, • Proficient in Microsoft Word, Excel, and PowerPoint, • Proficient in reviewing and understanding budgets and financial statements, • Direct experience and knowledge of mechanical, electrical, and plumbing components for condominium buildings, • Strong organizational skills, • An honest, responsible, optimistic, and enjoyable demeanorRequirements:

Job Description Job Overview: Perform preventative and repair maintenance work to ensure hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Essential Functions • Conduct room inspections and identify repair needs., • Install or repair sheet rock and other wall coverings., • Paint designated areas and items., • Install and replace basic electrical fixtures, replace light switches, receptacles, and light bulbs., • Repair furniture., • Install, replace, and program televisions., • Perform minor plumbing functions, • Replace and repair heating and cooling pumps as well as preventative maintenance on units., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventative maintenance records., • Perform and maintain work to local, state and Federal codes., • Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Work as a bell attendant in the event of staffing shortages or during peak check in/out periods., • Follow Service Recovery Guidelines., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Ensure overall guest satisfaction., • Perform other duties as requested by management. Position Requirements • High School diploma and Trade school course work in related field preferred., • Previous engineer/maintenance experience or equivalent training required. Work Context, • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing.

Job DescriptionDescription: TBI Airport Management, Inc.Hollywood Burbank AirportJob DescriptionPrincipal Construction Inspector Reports to: Director, Engineering Status: Exempt Schedule: 9/80 (Every other Friday off) Pay: $155,000 - $170,000 annually General Description: The Principal Inspector is a senior-level position responsible for overseeing, coordinating, executing inspection, and ensuring contract compliance duties for various Capital Improvement Projects and Tenant Improvement projects. The position would require exercising best judgment and considerable discretion to ensure that airport facilities and construction comply with federal, state, and local regulations, contract specifications, safety standards, and airport policies. The position will serve as a technical subject matter expert and point of contact for inspection matters. Essential Job Functions: Typical Tasks • Plan, supervise, coordinate and/or perform inspection activities for airport capital improvement projects, minor projects, and tenant improvement projects, for both horizontal and vertical facilities, i.e., airside pavements, runways/taxiways, aprons, lighting & signage, utilities, terminal building, parking structures, hangars, and other facilities and infrastructure., • Ensure compliance with applicable regulations, FAA Advisory Circulars, Airport Rules and Regulations, local building codes, environmental and safety laws, contract documents, specifications, project plans, airport operating procedures, etc., • Perform both routine and complex construction inspections and approve or reject work/materials as appropriate., • Review construction plans, project specifications, change orders, and shop drawings for constructability, compliance, safety, and enforceability., • Coordinate with planning, engineering, operations, maintenance, SMS, security, environmental, and other internal/external stakeholders to resolve non-conformances, safety issues, or regulatory findings., • Prepare, maintain, and ensure adequate documentation of inspection reports, logs, deficiency reports, noncompliance findings, and follow-ups., • Lead or assist in construction incident/investigation reviews (e.g., pavement failures, lighting outages, safety incidents) and recommend corrective or preventive actions., • Manage contractor compliance during construction and maintenance; oversee quality assurance/quality control (QA/QC) processes., • Assist other departments with various facility inspections required for compliance with Airport Rules and Regulations, stormwater permits, leases, and other contract documents., • Supervise, train, mentor, and/or evaluate junior staff, as required., • May serve as liaison with federal, state, and local jurisdictions, contractors, vendors, and community stakeholders about inspection standards and safety concerns on construction., • Coordinate efforts for area and utility shutdown with various stakeholders and affected parties., • Required to work standard business hours during the day and to adjust to night or weekend schedules as needed to accommodate construction activities, operational requirements, and coordination with project and office staff. Employment Standards • At least 10 years of progressively responsible experience in inspection, construction, and/or facilities management in an airport or comparable infrastructure setting (e.g., major public works, transportation facility, utilities)., • Experience supervising or leading inspection staff and/or contractors., • Demonstrated experience reviewing construction plans, specifications, contracts, and change orders, enforcing compliance., • Experience with quality assurance / quality control in construction or maintenance, and ability to detect deviations from plans or safety standards and drive remediation., • Requires a creative approach in formulating responses and making recommendations under high pressure environment., • Possession of a valid California Driver’s license, • Obtain and maintain security clearance as required by role and TSA regulations., • Occupational safety training and certifications, • ICC (International Code Council) inspector certifications (for electrical, mechanical, building, etc.) a plus Knowledge of: • Principles of Airport, Civil, Mechanical, Plumbing, Electrical Engineering, Architecture, and other related fields., • Construction safety standards., • Environmental principles, hazardous material handling, and stormwater best management practices., • FAA Advisory Circulars, California Building Codes, and other local and state requirements., • Part 139 Airport operational requirements as it relates to facility development., • Read and interpret complex technical documents, design drawings, project specifications, and perform constructability review., • Exercise best judgement and considerable discretion to address challenges. Must have strong decision-making skills, especially in safety-critical context., • Foster collaboration and cross coordination among project stakeholders., • Orally communicate via public speaking, tenant communications, and meetings., • Maintain integrity and discretion necessary to safeguard confidential data managed or obtained as regular part of the job., • Operate motor vehicles, and ability to walk around construction sites, exposure to weather conditions, use of personal protective equipment and hand and arm dexterity to operate computers, printers, and telephones., • Ability to work outdoors, often in varying weather conditions; walk long distances on uneven/rough terrain; climb ladders or work at height where necessary., • Ability to respond to off-hours emergencies, construction work interruptions, urgent safety concerns. Requirements:

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR FLIGHT DYNAMICS ENGINEER II As a Senior Flight Dynamics Engineer II based out of our headquarters in Long Beach, CA, you will perform tracking, navigation, maneuver, trajectory planning, and collision avoidance design and operations for Earth orbiting, lunar, and interplanetary missions as part of a dynamic team with subject matter experts from Systems, Ground Software, Electrical, Avionics, Flight Software, Thermal, Propulsion, and GNC engineering disciplines. You will need to solve complex problems, at times under time critical conditions. You will be developing the ground scripting in Python to automate these flight dynamics processes. YOU'LL BRING THESE QUALIFICATIONS: • A Bachelor's degree in Aerospace, Mechanical, Space Systems, or Software Engineering, or an equivalent Engineering or Applied Physics degree., • 8+ years of work experience in mission design, flight dynamics., • An advanced understanding of orbital mechanics., • Orbit determination theory., • Mission analysis with STK, Astrogator, GMAT, Monte, Copernicus, or equivalent., • Orbit determination analysis with ODTK, Orekit, or equivalent., • Python software development., • Git version control, or an equivalent version control system., • Jira software project management or equivalent., • Active DoD US Government Secret Security Clearance or, ability to obtain and maintain one, • U.S. citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's degree in Aerospace Engineering or related field., • Monte Carlo numerical simulation., • Continuous integration practices., • Team and/or software project management experience., • Ability to work complex problems under time pressure., • Ability to prioritize tasks in consultation with a range of stakeholders. ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$150,000—$200,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description About Climatec For over 40 years, Climatec has steadily invested in their people, technology, and services to be a trusted business partner for building solutions. As part of the Bosch Building Technologies Integrator Business in North America, Climatec is one of the leading providers of building technologies and energy solutions in the nation – delivering results for thousands of customers, every day. Climatec’s strategic business partners include the world’s leading suppliers of building automation, security, life safety, and energy efficiency technologies. About Bosch The Bosch Group is a privately held supplier of innovative technology and services with over 400,000 associates worldwide. Its unique private ownership structure was established to promote entrepreneurial freedom and long-term business focus. Bosch’s operations serve millions of customers across four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. Level Descriptions: • Level I – Must be able to achieve many objectives of this position. Requires some amount of timely supervision to ensure the proper tasks are being accomplished and that communication is adequate, timely, in the correct manner (i.e. verbal, written, email, etc.), • Level II - Consistently achieves all the objectives of this position. This individual also provides mentoring and direct day-to-day supervision to level I positions., • Performs maintenance, troubleshooting and service repairs on chilled water systems, heating hot water and steam systems, large air handlers, air distribution systems and electronic and pneumatic control systems., • Installs new units or replacement parts for existing units according to specifications and local building codes., • Follow blueprints or engineering specifications to install units and troubleshoot., • Work with office to generate proposals including labor and all parts required., • Maintain and secure a parts inventory. Recommend purchasing maintenance equipment and supplies as required to improve processes and efficiencies., • Strong knowledge of the hazards associated with the occupation, and the safety precautions to maintain all times; examples include knowledge of procedures in handling chemicals such as degreasers, cleaners, Freon and acids., • Available and willing to be called upon any time, including off working hours to handle emergency duties., • Interpret Climatec’s and other’s drawings to install or service the mechanical equipment or pneumatic controls within a building., • Install conduit, tubing, valves, etc. for controls and/or special building systems., • Support installation personnel on project sites., • Provide information and support for other contractors on project site., • Assist as required troubleshooting efforts during either the static or dynamic start up or commissioning of building controls, mechanical equipment, and special systems., • Provide input to others as requested or required to assist in the accurate estimation, design, and installation for building systems or mechanical equipment., • Provide documentation including daily logs, time sheets, service work orders, etc. as required for assigned projects. Basic Qualifications: • Minimum of a high school diploma or equivalent., • 4+ years of experience maintaining, repairing, and installing refrigeration and HVAC units, equipment, and systems; and completion of an associate degree program in HVAC/refrigeration systems; and completion of a two-year technical HVAC/refrigeration training program; or an equivalent combination of training and experience., • EPA Section 608 certification (CFC) required. Must maintain all customer documentation of refrigerant use., • Experience interpreting job documents, owner documents, and company documents to install and/or service pneumatic control systems and HVAC equipment., • Proficiency in working with electronic equipment such as volt meters, amp meters, oscilloscopes, etc., • Ability to troubleshoot basic electric and electronic circuitry, including reading and interpreting electrical and electronic diagrams., • Familiarity with AC power circuitry, including breakers, multi-phase power, etc. (120VAC and greater)., • Excellent verbal and written communication skills., • Strong interpersonal skills with the ability to empathetically understand and address the issues and perceptions of others., • Thorough understanding of HVAC operations within a facility., • Be able to lift and carry ladders, drawings, personal computers, material, etc., • Be able to spend significant time standing and walking on construction sites., • Be able to climb several flights of stairs or ladders throughout a typical day on a construction site., • Maintain a satisfactory driving record which, per Climatec’s vehicle policy, allows the individual to drive a company vehicle., • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Position Title: Maintenance Manager Classification: Salaried Department: Production Supervises: Maintenance Staff Reports To: Plant Manager Work Schedule: Varies based on plant Position Objective: Execute on the deployment of Total Prevention Maintenance (TPM) processes across more than 30 recycled glass processing plants, including process development, training, and compliance auditing. Provide support to glass processing plants, regionally and nationwide, in the operation and maintenance of optical sorting machines and other industrial equipment. Position Description: The Maintenance Manager will report to the Plant Manager and lead the plant maintenance team to maintain, troubleshoot and repair the plant equipment. Key Responsibilities: • Practice and enforce safe practices with department, • Train employees on safety and best practices, • Ensure employees are trained on job specific assignments, • Maintenance of pneumatic valves on optical sorting machines, • Audit plant performance at completing maintenance tasks., • Become a subject-matter expert in the operation and troubleshooting of optical sorting machines from multiple manufacturers., • Calculate and issue monthly fuel surcharge updates, • Champions and supports Lean and Continuous Improvement Initiatives, • Change belts and idler pulleys on trough-style conveyors, • Develop and refine maintenance planning processes; and preventive maintenance program for mechanical and electrical equipment, • Evaluate and ensure the quality of maintenance performed by internal plant maintenance teams and external vendors., • Identify plant performance issues and provide recommendations for equipment and design changes to correct them., • Lead plants in performing root cause analysis (8D process) of issues involving quality, yield, and uptime., • Manage company-wide system to track capital assets, life expectancy, and repair and maintenance (R&M) budget and costs., • Manage equipment vendor relationships with major equipment suppliers; global spare parts program; spare parts inventory – order parts as needed, determine and manage stocking levels, • Oversee maintenance of forklifts and loaders, • Part number administration and entry, • Perform hands-on escalated maintenance troubleshooting and repairs; periodic preventive maintenance checks as required; basic electrical troubleshooting and repairs, • Provide coaching, training, and accountability to plant maintenance managers, and assist in hiring of new plant maintenance managers., • Reportable Administration - adding new reports, adding users, report maintenance, managing user report access, • Support Continuous Improvement initiatives; emergency repair process; provide plant managers and plant maintenance teams with first-line escalation support during equipment failures., • Track equipment status, redistribute maintenance and spare-parts assets, and expedite high-priority repair efforts to maximize plant uptime performance., • Supervise and lead plant maintenance team, • Train plant personnel to assist in basic maintenance and PMs, • Weld and fabricate, as needed, patch holes in steel chutes and transitions, • 480vAC/3/60 electrical troubleshooting, • 3 to 5 years of maintenance experience, • Ability to lead and direct the work of others, • Ability to manage time and prioritize effectively, • Ability to read mechanical and electrical drawings and schematics preferred, • Able to work safely and efficiently, • Advanced mechanical and electrical maintenance skills, • ERP systems experience, • Excellent communication and people skills, • Experience with TPM Maintenance Program, • Strong computer and plant controls skills with analytical problem solving and troubleshooting skills, • Good communications skills – bilingual English/Spanish preferred, • Industrial manufacturing experience preferred, • MS Office required, including Excel, Word, and Outlook, • Rigging of motors, conveyor pulleys, and other heavy components, • Strong experience with mechanical conveyors, • Strong welding and fabrication skills, i.e., stick and wire welding, • High school diploma, or equivalent, required, • 3-5 years of Supervisory experience, • Lean Manufacturing experience, 5s, and/or Six Sigma certification a plus, • Will be exposed to dusty and noisy conditions periodically Ability to occasionally lift or move up to 50 pounds. 50 % bend, stoop, twist, reach, and climb steps. Up to 75% walking or standing required. Employee is regularly required to use hands to troubleshoot equipment, and large and small mechanical parts, regular fine hand manipulation, and may be required to write and type on a computer keyboard.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Flexible schedule, • Health insurance, • Paid time off, • Training & development Position Description: This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCDs Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures. Position Description: • Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations., • Implement the electrification of central plants and other building systems outlined in the Board of Trustees Clean Energy Resolution passed in July 9, 2020., • Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues., • Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives., • Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency., • Understand Title 24 and ASHRAE recommendations., • Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines., • Assist College Project Teams (CPTs) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFCs), Change Orders, etc., • Travelling to and from project sites upon request of attending project and construction meetings., • Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout., • Perform electrical engineering analysis and technical reports supporting District design guidelines., • Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls., • Perform other related duties as assigned by the PMO and LACCD.Minimum Required Qualifications:, • Bachelors Degree in in Electrical Engineering, • 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects., • Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards.Preferred Qualifications:, • 2 years experience in Educational Facility Construction, • Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS), • California Professional Engineering (PE) license in Electrical Engineering

Job DescriptionOverview Are you a hands-on problem-solver with a passion for precision mechanics and cutting-edge electronics? We are seeking a talented Electromechanical Technician to join our dynamic team in Northridge, CA. This isn't just a job; it's an opportunity to be at the forefront of innovation, working on complex systems that integrate mechanical, electrical, and software components. If you thrive in an environment where your technical expertise directly contributes to groundbreaking solutions and you're eager to continuously learn and grow, this role offers an exciting career path with significant impact. Our company fosters a collaborative and supportive culture where curiosity is encouraged, and professional development is a priority. We believe in empowering our team members with the tools and knowledge they need to excel, providing ample opportunities for skill enhancement and career advancement. You'll work alongside experienced engineers and technicians, contributing to projects that challenge your abilities and expand your understanding of sophisticated electromechanical systems. This role is ideal for a dedicated individual looking to deepen their technical skills and take on increasing levels of responsibility within a forward-thinking organization. Join us and become a vital part of a team that values ingenuity, quality, and a commitment to excellence. We're looking for someone who is not only proficient in their craft but also eager to share knowledge, embrace new challenges, and contribute to a positive and productive work environment. If you're ready to make a tangible difference and grow your career in a supportive and innovative setting, we invite you to explore this exciting opportunity. Duties & Responsibilities As an Electromechanical Technician, your responsibilities will include a diverse range of tasks focused on the assembly, testing, maintenance, and troubleshooting of advanced electromechanical systems. Your contributions will be critical to ensuring the reliability and performance of our products. • Perform precise assembly and integration of mechanical and electrical components according to schematics, blueprints, and engineering specifications., • Conduct diagnostic tests and troubleshooting of complex electromechanical systems to identify root causes of malfunctions and implement effective solutions., • Calibrate and adjust sensors, actuators, and control systems to meet performance requirements., • Execute preventive maintenance procedures on equipment to ensure optimal functionality and extend lifespan., • Document all testing, maintenance, and repair activities accurately and thoroughly, maintaining detailed records., • Collaborate closely with engineering teams to provide feedback on design improvements and assist in the development of new products., • Assist in the setup and validation of new equipment and processes., • Participate in cross-functional teams to resolve technical challenges and improve operational efficiency., • Adhere to all safety protocols and quality standards in a fast-paced manufacturing or R&D environment., • Health and Wellness:Medical, dental, and vision insurance plans with various coverage options., • Financial Security:401(k) retirement plan with company matching contributions to help you plan for your future., • Paid Time Off:Generous paid time off (PTO) policy, including vacation, sick leave, and company-paid holidays., • Professional Development:Opportunities for continuous learning through internal training programs, workshops, and tuition reimbursement for approved courses and certifications., • Work-Life Balance:Potential for flexible work arrangements and a supportive environment that values personal well-being., • Minimum of 3 years of hands-on experience as an Electromechanical Technician or in a similar role., • Associate's degree or technical certification in Electromechanical Technology, Electronics, Mechatronics, or a related field., • Proficiency in reading and interpreting electrical schematics, mechanical drawings, and assembly instructions., • Demonstrated ability to use a variety of hand tools, power tools, and precision measurement equipment (e.g., multimeters, oscilloscopes, calipers)., • Strong understanding of electrical circuits, control systems, motors, sensors, and mechanical assemblies., • Experience with soldering and wiring techniques., • Basic computer skills, including familiarity with diagnostic software and Microsoft Office Suite., • A proactive and independent problem-solver who can diagnose issues efficiently and implement effective solutions., • Possesses excellent communication skills, capable of clearly explaining technical issues and collaborating effectively with team members and engineers., • Demonstrates a strong commitment to quality, accuracy, and safety in all aspects of their work., • Adaptable and eager to learn new technologies and processes as they evolve., • Exhibits a positive attitude, strong work ethic, and ability to work effectively both independently and as part of a team., • Someone who takes pride in their craftsmanship and contributes to a culture of continuous improvement., • Work Location:This is an onsite position located at our facility in Northridge, CA., • Travel Requirements:Minimal to no travel is anticipated for this role.

Job Description Maintenance Supervisor – Demaree Street Apartments | Visalia, CA WHO WE ARE: Founded in 1975, CONAM Management operates in 10 states, across 26 key metropolitan markets, supporting over 60,000 apartment units of both affordable and conventional housing. Our growing team of over 1,700 associates is dedicated to maintaining and enhancing the quality of life for our residents. At CONAM, we foster a collaborative, team-oriented culture where our associates thrive and are valued for their expertise and commitment. WHAT WE'RE LOOKING FOR: We are seeking a skilled Maintenance Supervisor to join our team at Demaree Street Apartments in Visalia, CA . This position is responsible for the overall maintenance of the property and supervision of the maintenance staff on site. This person is responsible for being hands on and completing the work orders on a timely basis. As a leader of our maintenance team, you'll play a crucial role in ensuring the operational excellence, curb appeal and resident satisfaction of the apartment community. This is a full-time position with full benefits and 100% housing included.. Pay range: $27.00 - $29.00 per hour - onsite residence required. Key Responsibilities: • Work with Community Manager to coach the maintenance team and monitor the team’s performance against community goals., • Assist in training the maintenance team staff on maintenance, safety and customer service procedures., • Assist Community Manager with annual budget and making recommendations on bids, • Adhere to and enforce compliance of all state law regulations and CONAM policies and procedures relating to the apartment community, • Perform and oversee routine preventative maintenance on equipment and systems, • Participate in an on-call rotation to provide after-hours emergency maintenance services as needed., • Ensure compliance with safety regulations and operational standards in all maintenance activities., • Ability to drive locally for business purposes pertaining to property management maintenance., • Experience:, • Minimum of 2+ years of hands-on experience in apartment maintenance or equivalent., • 2+ years of multi-family industry experience preferred, • 1-2 years in a supervisory role strongly preferred, • Technical Experience: Able to handle tools and power equipment, such as drills, saws, grinders, electrical testers, HVAC systems, and plumbing tools. including proficiency in plumbing, electrical systems, HVAC, appliance repair, and general carpentry, • Tech Savvy: Proficiency in Microsoft Office Applications strongly preferred, • Problem-Solving Skills: Strong troubleshooting abilities to quickly assess and resolve maintenance issues, ensuring minimal disruption to residents., • Communication: Excellent verbal and written communication skills to interact with residents, team members, and vendors effectively., • Customer Focus: A passion for delivering exceptional service to residents and creating a positive living experience., • On Call Rotation: Willingness to work a flexible schedule and participate in an on-call rotation to handle apartment maintenance emergencies., • Ability to lift up to 50 lbs. Our benefits include: • Medical, dental, vision insurance, • Pet insurance, • Life insurance and identity theft protection, • Paid sick and vacation time, • 401(k) plan with company match, • Flexible Spending Accounts (FSAs), • Employee Assistance Program (EAP) Additional Information: • This position is contingent upon passing a background check, employment verification, pre-employment physical, drug screening, valid driver’s license and auto insurance., • CONAM will consider qualified applicants with criminal histories in a manner consistent with the requirement of the law. Pay Bands: Pay bands are established based on geographic location, internal equity, market conditions, and candidate qualifications. We provide competitive compensation based on experience and qualifications.

Job DescriptionDescription: Join a culture of excellence: Where your ideas are heard and valued. Where your hard work is recognized and rewarded. Where all full-time employees become shareholders on day 1, Enjoy our 9/80 work schedule with every other Friday off! We offer Health, Dental, and Vision Insurance, Company paid Life, Short- and Long-Term Disability, 401(k) with matching contribution, Holiday, Paid Time off, and more! Cristek Interconnects, LLC. is a positive and inclusive work environment looking to grow our team. The ideal candidate is aligned with our outstanding culture and would like to be part of the best interconnect company in the world. Someone looking to thrive in a career by learning new skills with hands-on training. Someone who is detail oriented and has a positive attitude. Join us and be a part of our journey of success! The Sr. Buyer is an experienced professional with a proficient understanding of components used in military aerospace applications. The buyer role requires a basic understanding of DFAR requirements and QMS policies managing the organization’s supply chain to support all aspects of development, production, and test activities in a high-mix, low volume manufacturing environment. The buyer must be able to communicate with both distributors and component manufacturers to quote, negotiate, place and monitor orders supporting the organization’s production schedule. Identify alternate sources of supply when schedules are impacted by material lead-time constraints. Support supplier qualification activities as needed. Support bid and proposal efforts with quotations and cost and lead-time estimates. Utilize experience and knowledge to continually drive procurement activity towards lowest total experience cost. Position Details / Expectations: • Monitor and analyze inventory levels for each product category and take appropriate action to maintain inventory levels within corporate guidelines, objectives and initiatives., • Monitor and ensure data base is current and complete for any items to be purchased., • Review MRP messages and generate or revise purchase orders to meet customer demand and inventory plan., • As required, investigate and develop new sources of supply from drawings and specifications., • Assess current supply base on an on-going basis and recommend changes/alternatives that could reduce purchased material cost or add higher value., • Establish priorities and in the case of schedule slippages or non-conforming material, establish the necessary corrective action., • Directs the development and execution of buying goods in a lowest cost of ownership format, increasing inventory turns., • Partner with sales, production, and operations to forecast demand and develop enhanced forecasting techniques and processes., • Coordinates with quality, manufacturing, production, and sales in order to determine product and service requirements and to insure that purchasing specifications are clearly defined., • Explores the market for new sources of supply and develops them in anticipation of need or when specific advantage is available., • Execute purchase orders., • Approve and or challenge vendor invoices to verify cost accuracy in the system., • Participating in special activities within the company when necessary., • Participate in reporting Cost and Pricing Date for, • Experience purchasing electronics, custom metal fabricated parts, cable and wiring harnesses, and / or complex electrical components and assemblies., • Read and interpret technical specifications and drawings., • Advanced Excel skills including use of pivot tables, lookup tables, etc., • Knowledge of Supply Chain principles and concepts in defense contracting., • Knowledge in the procurement processes of military grade products., • Preferred: Bachelor's Degree in Supply Chain, Business or a related field., • Preferred: 10+ years of purchasing, supply chain, or related experience in a manufacturing environment., • 10+ years’ experience in MS Word, PowerPoint, Excel and SAP/MRP system. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Power Electronics Engineer II to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from helping define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, and manufacturing support. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university, • Minimum of 2 years of experience designing analog and power electronics, • Experience with power stage design of basic DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost), • Knowledge of voltage mode control and peak current mode control theory for DC-DC converters, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, spectrum analyzers, electronic loads, and signal generators, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Master of Science or PhD in Electrical Engineering with research focus in power electronics, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Experience with power magnetics modeling, design and laboratory characterization, • Experience with control loop modeling and laboratory characterization, • Knowledge of power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices, • Experience with laboratory characterization of power magnetics

Job Description Associate Electrical Engineer - Los Angeles, CA (#F0001) Location: Los Angeles, CA Employment Type: Full-Time Employee retirement plan (401k) with a generous match and immediate vesting Company-issued and company-paid Amex card for travel All travel expenses paid directly by the company Company-paid tax-free Health Savings Account (HSA) CMS’s Long-Term Care Basic Training and SMQT certification are required About Impact Recruiting Solutions: Impact Recruiting Solutions is a dedicated recruitment partner connecting engineering professionals with rewarding opportunities. We collaborate with top construction firms to match skilled individuals with roles that align with their expertise and career aspirations. Position Overview: As an Associate Electrical Engineer, you will leverage your technical expertise in building services systems across innovative projects both domestically and internationally. Strong communication and teamwork skills are essential, providing you with unique career, project, and development opportunities. Key Responsibilities: • Collaborate with clients, architects, and engineering teams to deliver high-quality designs, • Create detailed design drawings, models, and technical specifications, • Manage project workloads and mentor junior engineers, • Monitor financial performance and ensure project delivery aligns with client objectives, • Proactively address workload issues and maintain project timelines Requirements • Education: Bachelor’s degree in Electrical Engineering or related field, • Licensure: Professional Engineer (P.E.) desirable; LEED AP accreditation preferred, • Experience: 8+ years in electrical engineering design within the construction industry, • Technical Skills: Proficient in Revit; familiarity with electrical fault analysis and lighting design software, • Competitive Compensation:, • Earn an attractive salary with annual discretionary bonuses., • Comprehensive Benefits:, • Generous benefits package, • 4-5 weeks of PTO plus 10 paid holidays, • 401k with company match, • Hybrid work options and summer hours, • Reimbursement for professional licenses and exam fees, • Opportunities for learning and development, • Access to a global network of experts, • Work Schedule: Flexible work arrangements with a focus on work-life balance., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization focused on advancing sustainable engineering practices.