Engineering jobs in Idaho Falls, IdahoCreate job alerts

Job Description THIS POSITION IS AT SANDIA NATIONAL LABORATORIES IN ALBUQUERQUE, NEW MEXICO, AND IS 100% ON-SITE. • Please note that this is considered a "local hire" position that does not provide relocation support. Global Engineering & Technology (GET) is seeking a highly qualified engineer with National Nuclear Security Administration (NNSA) experience for the position of ConOps/Readiness Subject Matter Expert (SME) supporting the Sandia National Laboratories (SNL) Environmental Safety & Health (ES&H) Planning Department. This is a highly compensated, long-term, on-site position at the SNL facility in Albuquerque, New Mexico, as a full-time GET employee with benefits. Work is performed onsite at the following locations: • The primary work location is 2301 Buena Vista SE, Albuquerque, NM 87106, • Work will also require local travel to the SNL facility on Kirtland AFB (also located in Albuquerque), • Travel to the SNL facility in Livermore, California, or other remote sites may be required on occasion Compensation Range: $137,500 - $160,000/Year (depending on experience and qualifications) Requirements Citizenship and Security Clearance Requirements • Applicant must be a citizen of the United States of America, • Applicant must hold a current DOD Top Secret or DOE Q security clearance Educational and Experience Requirements THIS IS NOT A JUNIOR POSITION - Applicant must meet one of the following combinations of academics and experience: • PhD degree in science or engineering discipline and a minimum of two (2) years ES&H-related experience, • MS degree in science or engineering discipline and a minimum of four (4) years ES&H-related experience, • BS degree in science and engineering and a minimum of six (6) years ES&H-related experience, • Or 10+ years of ES&H-related experience Required Qualifications • DOE O 422.1 CONDUCT OF OPERATIONS - Thorough knowledge of the requirements for establishing and implementing Conduct of Operations Programs at the Department of Energy (DOE), including National Nuclear Security Administration (NNSA) facilities and projects., • DOE O 425.1 VERIFICATION OF READINESS TO START UP OR RESTART NUCLEAR FACILITIES - Thorough knowledge of the requirements for verifying readiness for startup of new hazard category 1, 2, and 3 nuclear facilities, activities, and operations, and for the restart of existing hazard category 1, 2, and 3 nuclear facilities, activities, and operations that have been shut down. Desired Qualifications Although training is available at SNL for the subjects found below, knowledge and experience relating to any of the following is highly sought after: • DOE O 420.1 FACILITY SAFETY, • Unreviewed Safety Question (USQ) process for nuclear facilities, • Independent Verification Review (IVR) of new or revised Safety Basis, • ConOps Training (e.g., FOO-200), • QA assistance (e.g., Management Self-Assessment (MSA) and/or Lead Assessor) Benefits We provide exceptional benefits to our full-time employees (spouse/family coverage option available at a company-subsidized rate). Benefits include: • Medical plan options with UnitedHealthcare, • Dental Insurance, • Long-term and Short-term Disability Insurance, • Life Insurance, • AD&D Insurance Global Engineering & Technology, Inc. is an equal opportunity employer and does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity, or any other reason prohibited by law in provision of employment opportunities and benefits.

Job DescriptionSalary: Join STRATA as a Civil Engineering Project Manager At STRATA, were more than just a civil engineering and construction materials testing company, were a team that values growth, collaboration, and making a real impact through exciting and complex design projects throughout the Intermountain West. About the Role Were looking for an experiencedEngineering Project Manager to join our team in our Idaho Falls, ID office. In this role, youll provide project management of civil engineering projects that may include roadway materials, structure foundations, earthwork, site development, mining/mine sites, power transmission facilities, drainage, and other civil engineering projects. Ideally, youll have a background of experience that includes engineering or management of the following types of civil engineering projects: • Earthwork and pavements, • Structural foundation design (signals, signs, bridges, walls), • Urban and rural drainage systems, • Erosion control and grading, • Site development, • Environmental documentation and permitting What Youll Do As a Project Manager at STRATA, youll play a key role in both winning and delivering projects. While you wont have direct reports, youll lead by example, mentoring and guiding team members throughout the project lifecycle. Your responsibilities will include: • Building client relationships and identifying new project opportunities, • Developing scopes, budgets, and schedules, • Preparing contracts and project execution plans, • Managing project performance, from kickoff to closeout, • Collaborating with engineers, geologists, technicians, and accounting staff, • Ensuring financial tracking and reporting are accurate and timely What Were Looking For • Licensed Professional Engineer (PE), • Bachelors degree incivil engineering or a related field, • 1020 years ofpost-degree experience in civil engineering design and project management, • Proven experience with the types of projects listed above, • Strong leadership skills and a track record of driving business success What We Offer We believe in taking care of our people. Heres what you can expect: • Medical, dental, and vision insurance, • 401(k) with company match, • Company-paid life insurance, • Short-term disability; long-term disability, • Paid Time Off (vacation and sick leave) and paid holidays, • Paid Parental Leave and a paid day to volunteer in your community, • Wellness benefits to support your health and well-being This position is in office and flexible in three different locations in Idaho (to be close to one of our offices in Pocatello, Idaho Falls, or Boise). If you share our Core Values of Safety, Integrity, Respect, Professionalism, Accountability, and Teamwork, come and join our team!! Learn more about STRATA here:

Job Description Hello! We are looking for a Solutions Engineer. Your role interfaces with customers and identifies their needs while working with various departments from network engineers, support, and operations to ensure a plan is in motion to improve the customer's experience. A Solutions Engineer works to balance various aspects of the project, from safety to design. Additionally, a Solutions Engineer researches advanced technology regarding best practices in the field and seeks to find cost-effective solutions. Responsibilities for Solutions Engineer • Work closely with Information Technology professionals within the company to ensure hardware is available for projects and working properly, • Provide detailed specifications for proposed solutions including time and scope involved, • Assist other department engineers in creating practical demonstrations of proposed solutions and demonstrating them to other members of the team, • Establish a framework for necessary contributions from various departments and facilitate their collaboration, • Analyze current technologies used within the company and develop steps and processes to improve, • Document and monitor requirements needed to institute proposed updates in relation to customer experience, • Work alongside project management teams to successfully monitor progress and implementation of initiatives, • Account for possible project challenges or constraints and proactively seek to manage challengesQualifications for Solutions Engineer, • Project development and leadership skill are preferred, • Experience developing IT and cloud infrastructure, • Master's degree in Computer Science or Software Engineering preferred, • Up to date understanding of best practices regarding system security measures, • Experience with software engineering, customer experience and design architecture, • Advanced understanding of business analysis techniques and processes, • Extensive knowledge and experience working with various operating systems, • Professional work experience in analyzing computer hardware and software, • Ability to work with various departments to facilitate the orderly execution of a proposed project plan Job Posted by ApplicantPro

Job Description Job Summary: Elevation Labs is seeking a highly motivated, detail-oriented Engineering Intern to support site-level initiatives, including assigned projects, and assist the engineering team with design and project completion. This internship provides hands-on experience in a fast-paced manufacturing environment while partnering with experienced engineering professionals. Essential Functions, Key objectives, and Responsibilities: • Work independently or collaboratively as a valuable team member in a professional environment, • Follow and provide direction effectively to support team operations and project success, • Read, interpret, and apply technical manuals, blueprints, and schematic diagrams, • Safely operate equipment when working at heights, including ladders and forklift safety platforms, • Utilize power tools and hand tools safely and effectively in daily tasks, • Support operation and interaction with PLC-controlled machinery using computer systems, • Perform assigned duties efficiently, accurately, and in accordance with safety standards, • Assist in sourcing parts and supplies to support maintenance and operational needs, • Understand and communicate proper and safe operating procedures for machinery, • Identify safety concerns and take appropriate corrective actions to maintain a safe work environment, • Contribute to or lead small teams on projects as needed Required Knowledge, Skills, And Competencies: Ideal Candidate Qualifications: • Effective written and verbal communication skills appropriate for a professional environment, • Strong team collaboration skills in a team-based work environment, • Mechanical aptitude with the ability to understand, operate, and troubleshoot tools and equipment (including drill press, grinders, saws, etc.), • Self-motivated with the ability to manage time effectively and meet deadlines, • Proficiency in SolidWorks, • Project management skills with the ability to organize and execute tasks efficiently Education/Experience: • Must have high school diploma or equivalency, • Currently pursuing a degree in Engineering or related field PHYSICAL & MENTAL DEMANDS • Frequent standing and walking within a manufacturing environment • Regular use of hands and arms for handling, operating, or feeling equipment and materials • Frequent reaching with hands and arms to perform job tasks • Occasional climbing, balancing, stooping, kneeling, crouching, or crawling as required • Ability to lift and/or move up to 10 pounds frequently and up to 50 pounds occasionally • Visual ability to interpret close, distance, color, and peripheral details with depth perception and focus adjustment The physical demands identified above are representative of those that will be required to successfully perform the essential functions of this job. WORK ENVIRONMENT • Work is performed in environments where chemical materials may be encountered • Required use of appropriate personal protective equipment (PPE) in designated areas • Exposure to shop or production environments with variable noise levels • Commitment to maintaining a strong safety mindset for personnel and equipment protection Disclaimer: This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required for the position. Job Posted by ApplicantPro

Job Description Project Engineer (New West Building Company) Reports To: Division VP, VP of Construction, or Managing Partner Job Type: Full-time, salaried Work location: On Site - Teton Valley, ID encompassing Victor, Driggs & Tetonia, ID and Alta, WY. Work locations may expand to Jackson, Wilson, and Teton Village, WY. New West Building Company builds high-quality residential and commercial projects with a focus on craftsmanship, safety, and teamwork. We’re looking for a skilled Project Engineer to join our team in Teton Valley, ID. About the Role NWBC is hiring a Project Engineer to support construction projects from preconstruction through closeout. You’ll help keep projects organized and moving by managing documentation, coordinating with subcontractors and stakeholders, supporting schedules, and reinforcing quality and safety standards—both in the office and on active jobsites. Key Responsibilities • Support multiple projects at various stages (precon → closeout), • Maintain accurate project documentation and records (drawings, revisions, logs), • Coordinate OAC meetings (agendas, minutes, action items), • Prepare project status updates and reports, • Manage RFIs (draft/upload/track/distribute), • Process and track submittals for compliance with project requirements, • Assist with project schedules and short-term lookaheads, • Support preconstruction (takeoffs, scope support, subcontractor outreach, bid leveling), • Track material deliveries and verify against approved submittals, • Perform on-site QA/QC and safety inspections; reinforce clean/organized jobsites, • Construction industry experience (internship or professional experience acceptable), • Proficiency in Microsoft Office Suite, • Experience or familiarity with Procore and Bluebeam, • Basic understanding of construction processes, building codes, and industry standards, • Strong organization, attention to detail, and communication skills, • Valid driver’s license and ability to travel to jobsites as needed, • 1–2 years of construction industry experience, • Bachelor’s degree in Construction Management, Engineering, or related field, • Advanced proficiency with Procore, • Highly organized and able to manage multiple priorities at once, • Detail-driven with a strong commitment to accuracy and follow-through, • Comfortable communicating with owners, architects, subs, and internal teams, • A critical thinker who can solve problems in a fast-paced environment, • Tech-savvy and eager to use tools like Procore, Bluebeam, Excel, and Planera, • Comfortable splitting time between office work and active jobsite visits, • Medical, dental, and vision insurance, • 401(k) with company match, • Supplemental insurance policies, • Unlimited PTO, • Paid parental leave, • Access to trade industry discounts and more!, • A key role on the project team with exposure to the full project lifecycle, • Growth potential within a high-performing construction team Please note: Compensation: The pay rate listed reflects the maximum for this role. Actual starting pay will be based on qualifications, experience, and internal equity. Work location: This job is on-site in Teton Valley, ID and/or Jackson, WY. Please apply only if you can work in those locations. Additional locations shown by the job site are used for recruiting visibility only and do not indicate alternate work locations. Equal Employment Opportunity, Reasonable Accommodation & Drug-Free Workplace New West Building Company is an Equal Opportunity Employer and considers all qualified applicants without regard to any protected status under applicable federal, state, or local law. Reasonable accommodations are available for qualified individuals with disabilities during the application and hiring process. We maintain a Drug-Free Workplace in accordance with applicable laws.

Job DescriptionSalary: $120,000 $170,000 DOE Principal Electrical/I&C Engineer Location: Idaho Falls, ID Company: Columbia Energy & Environmental Services Salary: $120,000 $170,000, depending on experience About Columbia Energy Columbia Energy & Environmental Services, headquartered in Richland, WA, is a well-established small business with a strong track record of delivering comprehensive solutions in engineering, design, fabrication, instrumentation and controls, and other specialized services. With expertise in fixed-price design/build/test projects, we serve both federal and commercial clients, consistently delivering high-quality results through innovation and technical precision. Our collaborative and experienced team is committed to providing practical, client-focused solutions tailored to address a wide range of challenges. Recently, we expanded our operations to Idaho Falls, ID, reflecting our ongoing growth and dedication to broadening our capabilities. We take pride in maintaining a strong reputation for quality and integrity while ensuring compliance with rigorous industry standards. Why Join Columbia Energy? At Columbia Energy, we foster a supportive and innovative environment where team members can thrive. As a growing small business with ambitious goals, we value initiative, teamwork, and a dedication to quality. This role offers the opportunity to lead high-impact projects, mentor the next generation of engineers, and shape the future of our instrumentation and controls discipline. Position Overview We are seeking an accomplished Principal Electrical/I&C Engineer to join our Idaho Falls, ID team. This leadership role combines advanced technical expertise with responsibilities for mentoring junior staff, serving as a discipline lead, and managing design/build/test projects. The ideal candidate will bring at least 15 years of hands-on experience in control system design and a proven ability to balance technical excellence with leadership and project oversight. This position requires strong collaboration across engineering, design, and fabrication teams while maintaining a focus on safety, compliance, and quality. Essential Responsibilities & Duties Leadership & Mentorship • Lead and mentor junior engineers, supporting technical growth and professional development., • Act as discipline lead on projects, ensuring technical quality and project success., • Identify, design, evaluate, and test solutions for nuclear and hazardous waste remediation, chemical processing, and commercial projects., • Develop P&IDs and oversee all aspects of instrumentation and controls, including system design, control panel design, and testing., • Conduct design and analysis in compliance with applicable codes and standards (e.g., NEC, UL-508A)., • Specify, integrate, and program hardware and software components, including PLCs., • Support multiple simultaneous projects across Washington, Idaho, and other locations., • Collaborate with designers to produce accurate, detailed drawings., • Generate test plans and procedures, supporting system testing and validation., • Maintain configuration control of baseline drawings and documents., • Communicate project status, progress, and technical challenges to stakeholders., • Provide construction oversight, including inspection, installation, testing, training, and system turnover., • Maintain a strong safety focus in office, fabrication shop, and field environments. Required Qualifications • Bachelors degree or higher from an ABET-accredited university., • Minimum of 15 years of demonstrated experience in control system design., • Experience leading project teams and mentoring junior staff., • Proven ability to prepare design deliverables, resolve review comments, and finalize design packages., • Experience in construction oversight, including installation, testing, training, and upgrades., • Proficiency with PLC programming, integration, and troubleshooting., • Strong problem-solving skills with instrumentation and control systems., • Self-starter with the ability to manage multiple priorities and meet deadlines., • Attention to detail and pride of ownership in work., • U.S. citizenship and ability to obtain government security clearance (required for federal contract work). Preferred Qualifications • Registered Professional Engineer (PE)., • Experience in hardware and software integration., • ASME NQA-1 or DOE project experience., • Nuclear facility and/or Navy Nuclear background., • Project management experience., • Flexibility to take on new challenges and expand technical skills. Key Success Attributes • Leader & Mentor: Guides junior engineers and fosters a culture of technical excellence., • Technically Proficient: Brings deep expertise in instrumentation, controls, and PLC systems., • Collaborative: Works effectively with engineers, designers, project managers, and shop staff., • Problem-Solver: Applies sound judgment to complex technical and compliance challenges., • Adaptable: Thrives in a fast-paced environment while balancing leadership and project execution. Equal Opportunity Employer Columbia Energy is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by federal and state law.

Job Description Engineer – Mechanical Full Time Temporary Current through September 2026 (Must be authorized to work in the United States) 4x10s, Mon – Thurs 7:00am – 5:30pm On site Idaho Falls, ID, US MarCom, LLC is a woman-owned small business with offices in Idaho Falls, Idaho; Butte, Montana; and Fort Collins, Colorado. Founded in 2003, MarCom provides environmental services, industrial hygiene services, radioactive waste management, and on demand staffing to U.S. Department of Energy sites as well as commercial customers. MarCom’s service approach and reputation is built on technical credibility and provides the highest caliber of qualified individuals for a diverse range of compliance areas. We are also committed to customer satisfaction and strive to be the supplier of choice. To achieve the operational excellence required to meet this goal, we align our business systems and readily adapt our operations to help meet milestones and schedules. Marcom is currently seeking an onsite Mechanical Engineer. Position Purpose: Position Purpose: This position supports the Department of Energy customer work scope primarily in nuclear facilities within the Civil/Structural & Analysis organization in a variety of projects and functions. Integrate safety into all aspects of engineering duties and personal accountability in the workplace. While not required, experience in the nuclear field and related construction is preferred, along with the ability to: Apply advanced principles, theories, and concepts, contribute to the development of new principles and concepts, develop solutions to complex problems or create innovations through adaptation of emerging technological developments or processes, serve as organization spokesperson on specialized topics within an area of expertise (e.g., component design and analyses are primarily with steel (and alloys). Additionally, may require planning efforts on complex assignments or projects, lead major design/analysis efforts, always evaluating progress and results and recommending changes in processes and procedures. Key elements: • Perform analysis, hand calculations, modeling and simulation of structural and mechanical systems and components., • Perform linear and nonlinear, static and dynamic, analysis of such factors as stress, force, vibration, and material plasticity. Compare results to the provisions of governing codes, standards, and orders., • Perform seismic analysis (static equivalent loads) of non-building structures and components of varying complexity., • Provide support to various projects requiring design and analysis of steel, aluminum., • Provide support to design teams in development of design requirements, alternative analysis, equipment selection and sizing, vendor equipment summaries and evaluations, and drawings., • Develop specifications, drawings, supporting analysis and calculations and Engineering Design Files., • Perform technical checking of Engineering Design Files and drawings for a variety of projects., • Provide support to Safety Analysis through analysis of accidents and their potential consequences., • Contribute to and develop cost estimates., • Perform and document detailed static and dynamic structural and mechanical engineering analyses of various non-building structures and components to verify design integrity. Recommend design changes to existing or proposed structures to ensure design function will be met under applied loads. Review vendor or project related submittals regarding structural analyses or other related topics for completeness and accuracy. Ensure principles of ISMS are incorporated into analysis, designs and execution of jobs., • Perform independent technical checks and reviews of others analysis and design packages to verify design, ensure integration of safety, and conformance to design codes and specifications., • Meet with customers to understand job requirements, plan the scope of work, estimate the resources needed to complete the task, establish the schedule, and report status., • Provide on-site support in job planning, execution, and post-job implementation., • Establish and maintain proficiency with computer-based design and analysis tools., • Be familiar with company standards and procedures and perform work to consensus codes., • Maintain job files, manage records, and submit to document control., • Prepare reports and presentations for various phases of work. Provide weekly status., • Participate in company safety activities (iMove, safety meetings and observations, assessments, etc.) and promote a safety conscious work environment., • Minimum 8 years of related technical experience performing analysis and design., • Accredited four-year degree in mechanical engineering. Prefer technical experience providing operations-oriented design and/or analysis. Prefer MS in mechanical engineering and experience using complex structural/stress, fluids analysis, heat transfer, thermal analysis, and finite element analysis., • Must have strong analytical and problem-solving skills and experience using structural/stress analysis and finite element analysis tools (Abaqus is preferred), and MS Word and MathCad., • Knowledge of/ability to apply national consensus codes and standards, federal/national statutes, and local guidelines as required., • Ability and willingness to learn and apply new skills., • Excellent communication and negotiation skills; can effectively write reports, make presentations and productively interface with design team, management, coworkers, and clients., • Complete work on schedule, participate in reviews, and provide technical checks and peer reviews, • Prefer experience using complex structural/stress (over fluids) analysis, and Abaqus finite element analysis., • Must be able to obtain an "L" Security clearance (depending on project requirements and approval)., • Licensed professional engineer in the State of Idaho in applicable engineering field is preferred., • General Employee Training including ISMS, VPP and safety meetings as required by the company or the task-specific or facility-specific conditions to be identified by the home organization supervisor or manager on the Individual Training Plan., • Additional task-specific training to be identified by the home or work organization manager. Page Break Safety, Health, Quality and Security Statement: • Must be familiar with, and comply with, all relevant health and safety requirements., • Knows and complies with environmental, safety, health, and pollution prevention regulations, policies, and procedures for this position., • Ensures own safety and safety of coworkers., • Reports unsafe work conditions to immediate manager., • Ensures that the five core functions of the Integrated Safety Management System are understood and applied when performing job duties. MarCom offers Health, Dental and Vision insurance Life insurance and Accidental Death & Dismemberment benefits, Long-term Disability insurance, Employee Assistance Program, Paid Time Off, Holiday pay and a 401(K) with a generous match.

Job Description Navarro Research and Engineering is recruiting a Mechanical Engineer (3782) in Idaho Falls, ID. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. Position Purpose: This Mechanical Engineer position supports the Department of Energy customer work scope primarily in nuclear facilities within the Civil/Structural & Analysis organization in a variety of projects and functions. Integrate safety into all aspects of engineering duties and personal accountability in the workplace. While not required, experience in the nuclear field and related construction is preferred, along with the ability to: • Apply advanced principles, theories, and concepts, contribute to the development of new principles and concepts, develop solutions to complex problems or create innovations through adaptation of emerging technological developments or processes, serve as organization spokesperson on specialized topics within an area of expertise (e.g., component design and analyses are primarily with steel (and alloys)., • Perform analysis, hand calculations, modeling and simulation of structural and mechanical systems and components., • Perform linear and nonlinear, static and dynamic, analysis of such factors as stress, force, vibration, and material plasticity., • Compare results to the provisions of governing codes, standards, and orders., • Perform seismic analysis (static equivalent loads) of non-building structures and components of varying complexity., • Provide support to various projects requiring design and analysis of steel, aluminum., • Provide support to design teams in development of design requirements, alternative analysis, equipment selection and sizing, vendor equipment summaries and evaluations, and drawings., • Develop specifications, drawings, supporting analysis and calculations and Engineering Design Files., • Perform technical checking of Engineering Design Files and drawings for a variety of projects., • Provide support to Safety Analysis through analysis of accidents and their potential consequences., • Contribute to and develop cost estimates. Minimum Qualification Requirements (Education/Experience): • Minimum 8 years of related technical experience performing analysis and design, • Accredited four-year degree in mechanical engineering. Prefer technical experience providing operations-oriented design and/or analysis., • Prefer MS in mechanical engineering and experience using complex structural/stress, fluids analysis, heat transfer, thermal analysis, and finite element analysis., • Must have strong analytical and problem-solving skills and experience using structural/stress analysis and finite element analysis tools (Abaqus is preferred), and MS Word and MathCad., • Knowledge of/ability to apply national consensus codes and standards, federal/national statutes, and local guidelines as required., • Must be able to obtain an "L" Security clearance (depending on project requirements and approval)., • Ability and willingness to learn and apply new skills., • Excellent communication and negotiation skills; can effectively write reports, make presentations and productively interface with design team, management, coworkers, and clients., • Complete work on schedule, participate in reviews, and provide technical checks and peer reviews, • Prefer experience using complex structural/stress (over fluids) analysis, and Abaqus finite element analysis., • Licensed professional engineer in the State of Idaho in applicable engineering field is preferred., • General Employee Training including ISMS, VPP and safety meetings as required by the company or the task-specific or facility-specific conditions to be identified by the home organization supervisor or manager on the Individual Training Plan. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status, or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability

You will report directly to the Vice President of AI Engineering and you will engineer the backend systems that power our agentic AI learning platform, empowering human-centered learning for the age of AI. As a backend and platform engineer with data engineering skills, youll build the infrastructur

Licensed professional engineer in the State of Idaho in applicable engineering field is preferred. Perform technical checking of Engineering Design Files and drawings for a variety of projects. Accredited four-year degree in mechanical engineering.

Provide engineering support in areas of expertise and be able to work effectively as a team player with other engineering professionals, crafts trades personnel, management, business developers, and administrative staff. Required Combination of Knowledge and Skill Bachelors degree from an accredited

Process Engineer directly impacts how fertilizer, crop protection products, and seed move through the supply chain. Evaluate facility workflows, conduct system assessments, and define engineering recommendations that elevate safety, reliability, and consistency across sites. Ability to translate ope

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Your new role: TRUMPF Field Service Engineer.

About Mercor’s talent network Join our Machine Learning Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Machine Learning Engineering - Creating tasks

About Mercor’s talent network Join our Backend Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Backend Engineering - Creating tasks and deliverables

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Site Reliability Engineer — Production Systems Expert** Mercor is seeking experienced Site Reliability Engineers with deep expertise in production incident response, on-call operations, and infrastructure reliability. You are a good fit if you:** - Have 3+ years of experience in SRE, DevOp

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

This engineer will own core product delivery end-to-end: platform foundations, integrations, analytics surfaces, and the pilot launch. Design and implement a scalable integrations framework - Build real-time analytics experiences - Architect an agentic tool-use layer compatible with MCP-

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering, science or construction field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical,

About Mercor’s talent network Join our Full-Stack Engineer Expert Network to connect with leading AI labs and companies seeking Full-Stack Engineering expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Full-Stack Engineering - Creating

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

About Mercor’s talent network Join our DevOps / Platform Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in DevOps / Platform Engineering - Creating tas

Key Responsibilities - Craft realistic developer prompts across multiple categories (code review, debugging, error diagnosis, configuration, and more) - Source and adapt content from real PRs to create authentic scenarios - Write clear, technically accurate model responses that demonstrate strong re

Data Entry / Remote] - Anywhere in U.Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring

About Mercor’s talent network Join our Frontend Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Frontend Engineering - Creating tasks and deliverable

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to contribute part

A degree of professionalism is expected as this position works directly with clients, engineers, and Federal representatives. Engineering Degree from an ABET accredited program with 1 years of highway construction experience. PM/Superintendent, or 3 years as an engineer/inspector/foreman, or NICET L

Civil Construction Quality Control Manager.Idaho Falls, Idaho, United States.HK Contractors, a CRH company, is a member of the CRH West Division; Our purpose, commitment to the future, and formula for growth is to champion the safety, empowerment, and development of our employees.We strive to be the

Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 8 years related experience and/or training; or 10 years equivalent combination of education and experience.

Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 8 years related experience and/or training; or 10 years equivalent combination of education and experience.

Apply software engineering principles, theories, and concepts to complex analytical processes and information display and visualization. Plan, develop, and implement software-engineering solutions to complex problems and major projects. Level 3: Bachelor's degree in computer science, software engine

Required Combination of Knowledge and Skill Candidates for Software Developer internship positions must be: Pursuing Computer and Electrical Engineering, Computer Science, Information Technology, Information Science, or related BS, MS or PhD degrees from an accredited college or university Must have

The role of the Commercial Project Manager (Storefront & Glazing) is to oversee commercial and residential glass projects from start to finish by coordinating installers, contractors, and vendors; ensuring jobs are completed safely, on schedule, and to quality standards; and providing clear communic

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to contribute part

We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to contribute part

Bachelor’s degree in Construction Sciences, Mechanical Engineering or similar engineering degree is required. The company has developed into one of America's premier Mechanical Construction and Facility Services companies serving clients through the full life-cycle of a facility, to include en

The successful candidate will support NEAP by leading a cross-site team of engineers to ensure the NEAP cranes are delivered as planned. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to contribute part

We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you're looking to contribute part-time