Trabajos Engineering en East Brunswick, NJ - Page 2Crear alertas

Job Description Role: Computer System Validation Engineer Location: New Jersey Exp: 10+ years Required Skills & Qualifications Bachelor s degree in computer science, Engineering, Life Sciences, or related field. Need 10+ years of experience. 37 years of experience in CSV within pharmaceutical, biotech, or medical device industries. Strong knowledge of GAMP 5, FDA 21 CFR Part 11, Annex 11, and related guidelines. Experience with ERP, LIMS, MES, or other GxP systems. Extensive Experience in HPALM with Manual testing. Deep knowledge in Defect Management Life cycle. Proficient in writing validation protocols, reports, and SOPs. Strong communication, documentation, and organizational skills. Preferred Qualifications Experience with cloud-based GxP systems. Familiarity with data integrity principles. Previous experience in audit preparation and support. Company DescriptionWe strive to be a trusted partner as an IT Solution provider. We are committed to achieve Customer's Business Objectives by Delivering Professional Services & adopting Innovative Technologies. Our talent pool is then assessed comprehensively to provide the right fit in implementation a long-term solution. Our goal is to provide you with the right resources, with the right IT competencies who fit in seamlessly in your culture.We strive to be a trusted partner as an IT Solution provider. We are committed to achieve Customer's Business Objectives by Delivering Professional Services & adopting Innovative Technologies. Our talent pool is then assessed comprehensively to provide the right fit in implementation a long-term solution. Our goal is to provide you with the right resources, with the right IT competencies who fit in seamlessly in your culture.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills Pay: $110,000 – $130,000 per year Benefits: • 401(k), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA, • HSA, • Paid Time Off, • Paid Holidays, • Profit Share, • Disability Insurance, • Life Insurance, • 8-hour shift

Job DescriptionPatuxent Engineering, LLC is seeking an Entry Level Structural Engineer for our NJ/NYC Office located in Metuchen, NJ. This position is an in-office role working with a team of engineers and designers. Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience).- Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction.- Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once.- Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionDescriptionCME Associates is currently recruiting for an Associate Engineer to join their team. If you are a hard-working, self-motivated team player, we invite you to explore a career with CME Associates. Responsibilities • Design and Drafting: Develop civil engineering designs, including site layouts, grading, drainage, utilities, and roadways using CAD software (e.g., AutoCAD Civil 3D)., • Permitting and Compliance: Prepare and submit permit applications to local, state, and federal agencies, ensuring compliance with applicable regulations and standards., • Project Collaboration: Work closely with project managers, surveyors, and other engineering disciplines to deliver comprehensive solutions tailored to client needs., • Technical Reports: Create engineering reports, feasibility studies, and calculations to support project design and decision-making., • Education: Bachelor’s degree in Civil Engineering or a related field., • Experience: 0–3 years of experience in civil engineering design, preferably in land development or municipal projects., • Technical Proficiency: Proficiency in AutoCAD Civil 3D and other relevant engineering software; knowledge of stormwater management software is a plus., • Licensing: Engineer-in-Training (EIT) certification required; Professional Engineer (PE) license is a plus or a willingness to obtain it.

Job Description We are seeking a skilled and detail-oriented Junior and Senior Electrical Estimators to join our team in Connecticut. The Electrical Estimator will be responsible for preparing accurate cost estimates for electrical construction projects, ranging from commercial and residential to industrial jobs. This role requires strong analytical skills, knowledge of electrical systems, and the ability to read and interpret blueprints, specifications, and technical drawings. Key Responsibilities: * Analyze project drawings, specifications, and related documents to prepare accurate material and labor estimates. * Collaborate with project managers, engineers, and subcontractors to gather pricing and cost information. * Use estimating software (e.g., Accubid, McCormick, Bluebeam, or similar) to develop detailed estimates. * Prepare and present bid proposals and change orders. * Maintain current knowledge of local codes, market conditions, and material pricing in Connecticut. * Evaluate vendor and subcontractor quotes for completeness and competitiveness. * Attend pre-bid meetings and site visits as required. * Track and update project costs and forecasts throughout the project lifecycle. Qualifications: * Minimum 3–5 years of electrical estimating experience, preferably in commercial or industrial settings. * In-depth knowledge of the National Electrical Code (NEC), Connecticut state codes, and industry standards. * Strong proficiency in reading blueprints, technical drawings, and construction documents. * Proficiency with estimating software and Microsoft Office Suite. * Excellent communication, organizational, and negotiation skills. * High attention to detail and ability to work independently in a fast-paced environment. * Valid driver’s license and willingness to travel to job sites in Connecticut as needed. Preferred Qualifications: * Electrical license or background in electrical construction is a plus. * Experience with design-build and hard-bid projects. * Familiarity with union and non-union labor practices in Connecticut. * Salary up to $140k including fully paid company medical/dental/401 k match * Career advancement opportunities. Company DescriptionNY/NJ well established electrical contractorNY/NJ well established electrical contractor

Job Description Hiring Company Overview Tri-State Light & Energy (TSLE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSLE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSLE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSLE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Section Title: Job Description Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in New Brunswick, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Section Title: Job Responsibilities Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Section Title: Qualifications Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Section Title: Professional Skills Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft Software including Word, Excel, Outlook, and Project and other management software. Section Title: Physical Abilities Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Section Title: Work Environment Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Section Title: Equal Employment Opportunity (EEO) Equal Employment Opportunity (EEO) TSLE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSLE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSLE makes hiring decisions based solely on qualifications, merit, and business needs at the time. Please read through our EEO Policy for more information. TSLE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSLE is a drug-free workplace. Section Title: Screening Screening TSLE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Section Title: Benefits Benefits • Medical, vision, and dental insurance., • 401(k) and company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Section Title: Work Schedule Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week., • Occasional weekends., • On-call requirement. Section Title: Compensation Compensation • Salary Range: Minimum $85K + commensurate with experience.

Job Description Senior Quality Engineer – Medical Device Do you want to make a difference in the world? Do you want to help save lives? Come start or continue your career with us! MICRO is a contract manufacturer providing services for companies engaged in life-saving products and solutions. MICRO offers an excellent benefits package, compensation higher than industry average and a full complement of training programs dedicated to give our employees the skills and knowledge required to achieve their career goals. So don’t settle for a job when you can have a career that makes a difference! Are you ready to? MISSION The Senior Quality Assurance Engineer is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. ESSENTIAL DUTIES AND RESPONSIBILITIES Research & Analysis • Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis, • Performs complex data analysis and uses six sigma tools to resolve complex quality issues., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Maintains expert level of understanding of GD&T, • Leads investigations to determine root cause, development of corrective action plans, verification and effectiveness activities., • Leads projects, teams and complex product transitions., • Develops quality standards and processes related to customer specifications and process improvement, • Communicates with customers, suppliers and other resources to achieve the objectives, • Evaluates process stability and capability, • Analyzes processes and procedures to ensure they fit the organization’s quality standards., • Ensures quality processes and procedures comply with internal SOPs, • Assists with regulatory audits, • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Quarantines, documents and evaluates products and materials, • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators, • Ensures compliance and assists with adherence to quality management system ASQ certification is preferred EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • 4 - 6 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required., • Experience reading and interpreting blueprints and gage design knowledge is required., • Experience with GD&T is required., • Experience with automate inspection systems is required., • Proficient in common quality methodologies, including: APQP, MSA, PPAP, SPC., • Strong manual and spatial dexterity skills is required., • Experience with Lean and Six Sigma methodologies is preferred., • Implementation of effective corrective action is strongly preferred., • Ability to work multiple projects., • Strong verbal and written communication skills as well as excellent interpersonal skills are required, • Must have exceptional organizational skills, ability to meet deadlines, thrive in a fast-paced environment and be able to problem solve effectively.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Free food & snacks, • Opportunity for advancement The ideal candidate should have 4-6 years relevant experience working with steel and concrete. Candidate should also be a self starter with the ability to network with industry to create portfolio of clients/projects. The candidate must be comfortable with full analysis and design of building components/stability. Candidate must be proficient and competent with steel, engineering codes (AISC, IBC, ACI, OSHA, ASTM, Chapter 33 NYC Building Code), connections, footings, support of excavation, concrete, floor system/underpinning, etc. Additional preferences for candidates include a Professional Engineer license (please list all applicable states) and/or someone working under a PE and/or working towards a Professional Engineer License. Please attach resume and cover letter as well as list any projects completed that are related to this type of work. Salary is flexible based on experience in industry and knowledge

Job Description NJ electrical contractor is seeking an experienced electrical construction 3D detailer for our Edison, NJ office to be a part of a team of coordinators and engineers that is proficient with Revit, AutoCAD MEP, Navisworks. Candidates with experience in commercial electrical contracting, preferably with pharmaceuticals, hospitals and/or data centers, are encouraged to apply. Salary up to $130k including company paid medical/dental/401k match

Job DescriptionDescriptionThe Senior Structural Engineer will be responsible for the detailed design and drafting of structural components for various projects, including, but not limited to, bridges, culverts, dams, buildings and other special structures. This role requires extensive experience in structural detailing, a high level of proficiency in AutoCAD, and the ability to collaborate effectively with cross-functional multi-disciplinary teams. Responsibilities • Structural Design and Detailing: Lead the design and detailing of structural systems for commercial, industrial, and residential projects, ensuring accuracy and compliance with all applicable codes and standards (e.g., AASHTO, NJDOT, ACI, ASCE, IBC NJ Edition, etc.)., • AutoCAD Proficiency: Utilize AutoCAD to prepare comprehensive, bid-ready construction drawings, plans, sections, details and layouts, ensuring precision and adherence to project specifications., • Project Coordination: Collaborate with project managers, engineers, and other team members to ensure seamless integration of design elements and timely completion of projects., • Quality Control: Review and check drawings and specifications for accuracy, completeness, and compliance with project requirements and industry standards., • Education: Bachelor’s degree in Civil Engineering with a focus on Structures or a related field., • Experience: Minimum of 8 years of experience in structural design and detailing, with a proven track record of successfully completing complex projects., • Licensure: Professional Engineer (PE) license in the State of New Jersey is preferred., • Technical Skills: A superior level of proficiency with AutoCAD is required. Familiarity with other design and analysis software (e.g., RISA 3-D, RISA Floor, RISA Foundation, CONSPAN, PennDOT design software, Mathcad, Shoring Suite and others) is a plus., • Communication: Excellent verbal and written communication skills, with the ability to effectively convey complex technical information to diverse audiences. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Genscript is seeking a Scientist in Molecular Automation for our Production team in Piscataway, NJ. The estimated salary range is $70,000 - $90,000, depending on experience. Responsibilities: • Conduct feasibility analysis, solution design, and vendor communication for the introduction of automation equipment into molecular biology production lines., • Proficiently operate and develop applications on automated liquid handling workstations such as Tecan EVO/Fluent, Janus G3, and Hamilton; familiar with workflow scheduling software such as PlateWorks, Momentum, and Green Button Go., • Establish stable automated production workflows and implement equipment in real production., • Take overall responsibility for the management of automation equipment in molecular biology production lines., • Learn and optimize existing production processes to improve utilization of automation equipment., • Education: Degree in Biology, Automation, or related disciplines preferred., • Industry Experience: Prior experience in automation within the biotechnology/biological sciences industry preferred., • Skills: Strong communication, problem-solving, logical thinking, and hands-on abilities., • Knowledge: Familiarity with basic molecular biology operations and automation technologies., • Personal Attributes: Proactive, responsible, innovative, diligent, and pragmatic., • Language requirements: English and Chinese., • 3-5 years of experience required. #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description R&D Engineering Project Manager About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: The R&D team at CompoSecure is looking for a Project Manager who challenges the status quo and works with passion. We turn an everyday payment card into an exciting and desirable secure artwork. CompoSecure created the metal credit card segment, and we would like to create the next payment card innovation with you. The primary responsibility of the Engineering Project to lead cross-functional projects spanning research and development (R&D), New Product Introduction (NPI), process scale-up, and commercialization within a manufacturing setting. This role will bridge the gap between R&D, operations, and commercial teams, ensuring that innovative products are developed, industrialized, and launched to market on time, within budget, and to spec. The project manager must work well on a team and utilize strong analytical and problem-solving skills. In addition, the position executes and completes independent projects. In this role the project manager is an integral part of the team and will be hands-on with tasks when needed. The Engineering Project Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Lead NPI and commercialization projects from concept to production, ensuring alignment with business goals and manufacturing capabilities. Develop and manage project timelines, budgets, scopes, and risk mitigation plans., • Serve as the main point of contact between engineering, product development, operations, supply chain, marketing, and quality teams., • Facilitate design for manufacturability (DFM) reviews and drive readiness of production systems to support product launches., • Coordinate prototype builds, pilot runs, and process validations, ensuring scalability and cost-efficiency., • Oversee technology transfer from R&D to production, ensuring technical documentation, SOPs, and training are in place., • Track and report project progress to leadership using dashboards and status reports., • Implement continuous improvement and lean manufacturing principles during product ramp-up and steady-state production., • Ensure all projects adhere to compliance standards (e.g., ISO)and internal quality systems. Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed, • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate, • Other miscellaneous duties as assigned, • Timely Corrective Action response and resolution to relevant project situations, • Engage and support companywide Safety and Cleanliness programs Qualifications: • · Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, or related discipline); Master's or PMP certification preferred., • · A minimum of 5 years of experience managing engineering projects in manufacturing, including new product introductions (NPIs)., • · Demonstrated experience bringing new products from concept to market in a manufacturing environment., • · Strong understanding of product lifecycle management (PLM), engineering change processes, and manufacturing scale-up., • · Proficient in project management tools (e.g., Jira and others) and PLM systems., • · Exceptional problem-solving, organizational, and communication skills. Preferred Experience: • Experience working in cross-functional development teams within consumer goods, electronics, medical devices, or automotive industries., • Knowledge of stage-gate or agile NPI processes., • Experience with automation, rapid prototyping, or digital manufacturing tools., • Comfortable with office automation to create workflows and automate tasks. (Power BI, Power Automate), • Familiarity with CAD, • Familiarity with cost modeling, supply chain integration, and supplier qualification during commercialization., • Familiar with new product testing & qualification processes, • Manufacturing experience, • Chemical Hygiene/Hazardous materials training ISO process familiarity Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: We are seeking a highly skilled Advanced Manufacturing Engineer with a strong background in highvolume production environments to lead initiatives in process integration, automation, and manufacturing excellence. This role focuses on launching and optimizing production lines capable of producing millions of parts annually, with deep expertise in manufacturing processes such as metal stamping, injection molding, blow molding, and automated assembly. The Advanced Manufacturing Engineer will report to the Director, Advanced Manufacturing Engineering and will work onsite 5 days a week at our HQ in Somerset, NJ. Key Responsibilities: • High-Volume Line Integration: Lead the end-to-end integration of new products into high-volume production lines, ensuring scalability, repeatability, and efficiency., • Manufacturing Process Expertise: Apply deep knowledge of CNC machining, stamping, injection molding, and automated assembly to optimize production processes and reduce cycle times., • Automation & System Design: Collaborate with automation teams to design, build, and implement robust automation systems including robotics, PLCs, and machine vision for high-throughput operations., • Yield & Efficiency Optimization: Analyze production data to identify bottlenecks, reduce scrap, and improve yield across high-volume lines., • Defect Analysis & Surface Engineering: Conduct root cause analysis on defects, particularly surface-related issues, and implement corrective actions to maintain product quality., • Cross-Functional Collaboration: Partner with R&D, Quality, and Operations to ensure seamless product launches and process improvements., • Continuous Improvement: Drive initiatives focused on cost reduction, quality enhancement, and throughput maximization using Lean, Six Sigma, and SPC methodologies., • Bachelor's degree in Engineering (Mechanical, Manufacturing, Industrial, or related field)., • Minimum 5 years of experience in high-volume manufacturing environments., • Proven experience integrating products into new production lines from concept to ramp-up., • Strong understanding of manufacturing processes including stamping, injection molding, blow molding, and automated assembly., • Proficiency in SolidWorks for product and production line design., • Expertise in automation systems including PLCs, robotics, and machine vision., • Experience with surface defect analysis and in-process quality control., • Proficiency in data analysis, root cause investigation, and corrective action implementation., • Familiarity with Lean, Six Sigma, SPC, and continuous improvement frameworks., • Advanced SolidWorks capabilities in designing complex assemblies and production tooling, • Familiarity with manufacturing automation systems, including PLCs, robotics, and machine vision systems., • Formal Design of Experiments (DoE) training and experience, • Ability to lead cross-functional teams through complex manufacturing challenges., • Experience with quality management systems and continuous improvement frameworks., • Knowledge of statistical process control (SPC) and other data-driven decision-making techniques At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Process Engineer Reports to: Director of CNC Operations & Process Improvement FLSA Status: Exempt; Professional Exemption.. Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on the afternoon shift (3 PM - 11 PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • 5+ years of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the afternoon shift (3 PM - 11 PM) and occasionally support coverage across other shifts as needed. Preferred Skills and Experience: • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Why Join Us? • Work in a fast-paced, innovative environment with room for growth and career development., • Competitive compensation, shift differential, and comprehensive benefits package., • Opportunity to lead impactful projects and gain exposure to high-end manufacturing Physical qualifications and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description We’re Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let’s help you with tuition reimbursement. Don’t know something? Let us send you to classes. Have you heard of DOMO? We’ll teach you that too! Come on in and we’ll show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. SUMMARY: We are looking for a Mechanical Engineer with an interest to create and develop new and/or improving current equipment to create a state-of-the-art manufacturing facility. Owning responsible for all phases of the project life cycle including concept generation, preliminary and detail design, analysis, assembly, and test as well as manufacturing support. This role works closely with engineering and manufacturing teams to qualify and execute design inputs, as well as manage external suppliers, vendors, sub-contractors, and internal resources within the company. DUTIES AND RESPONSIBILITIES:  Maintain the knowledge base which consists of, but is not limited to, processes, documentation, engineering change orders, bills of material, product tables and system logs. Create and evaluate the documentation used in production.  Provide technical assistance during the sales phase of the project, including providing estimates of hours for design efforts.  Designs to meet requirements, ensure requirements are satisfied, while balancing the constraints of time and money.  Answers technical questions and resolving technical problems regarding the design, operation, and reliability of the equipment. Working closely with mechanics to trouble-shoot major breakdowns  Responsible for the design of the equipment, or process, develop drawings and BOM.  Creates the design schedule, establishes milestones, and manages the design effort to ensure quality and timeliness of the completed design package.  Serves as the primary focal point for all technical communications with the customer and internal group.  Establishes and maintains a design baseline and manages change orders.  Responds to shop floor feedback regarding technical problems encountered or improvements suggested during manufacture. Manages the resolution/ improvement process.  Inspects incoming equipment; completes FAT prior to shipment; creates and maintains manuals for equipment and custom job orders.  Manage the transferring of 2D CAD system to 3D (SolidWorks); Maintains CAD and SolidWorks databases and ensure accurate and timely retrieval of all engineering data.  Creates a system to maximize standardization with the capability to effectively deviate from standard designs when necessary.  Designs and maintains a system to ensure the continuous improvement of the engineering function to establish the company as a leader in state-of-the-art technology within its product lines.  Establishes the policies and procedures for tasks within this role to be performed on a continuing basis. QUALIFICATIONS:  Experience with production / manufacturing equipment  Degree in Mechanical Engineering  Ability to design solutions to improve productivity  Strong knowledge of machine functionality and baselines  Ability to create machine manuals / operating guide lines Reviewed by Date: Approved by Date: HR Approved Date: Last Update Next Update  Establish perimeters / setting from test result on equipment  Preform IQ, OQ, including FAT’s for new equipment  Knowledge in specifying proper equipment for manufacturing process  Ability to complete projects on time and on budget  Ability to manage multiple projects with no decline in quality control  Excellent verbal and written communication skills  Experience with working with outside vendors with equipment design and build  Bilingual a plus COMPETENCIES:  Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.  Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.  Teamwork--Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.  Planning/Organizing--Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.  Innovation--Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. PHYSICAL REQUIREMENTS:  Standing  Walking  Sitting  Typing/Keyboarding  Light work under 50 lbs. lifting

Job Description Staff Engineer - Outside Plant Location: Client Field Offices across New Jersey Employment Type: Full-Time Work Schedule: Monday through Thursday (10 hours/day) About Us: CARIAN is a leading, women-owned consulting and advisory firm dedicated exclusively to the power, renewables, and utilities sectors. We specialize in program management and business intelligence services, partnering with Fortune 500 utilities to navigate complex challenges and deliver transformative results. We are seeking a Staff Engineer – Outside Plant Construction to support critical utility projects across New Jersey. This position provides both engineering and construction support for outside plant utility projects such as Overhead Transmission and Distribution project, working directly in client field offices and ensuring seamless coordination between engineering requirements and construction execution. You will play a critical role in ensuring projects are completed safely, on time, and within scope. Position Summary: The Staff Engineer will be responsible for providing technical expertise and construction oversight for outside plant utility projects, including engineering support, field inspections, and ensuring compliance with project specifications and industry standards. Responsibilities: * Provide on-site engineering and construction support for outside plant (e.g. overhead transmission and distribution) utility projects. * Assist with troubleshooting and resolving technical issues related to both engineering and construction. * Monitor construction progress and address field issues to ensure compliance with project requirements, safety, and quality standards. * Ensure compliance with utility regulations, safety standards, and permitting requirements. * Collaborate with project managers, contractors, and stakeholders to coordinate technical aspects and address field challenges. * Develop and maintain accurate project documentation and status reports. * Utilize Power BI or similar tools to track and report on key performance metrics. * Travel to various project sites as needed. Qualifications: * Bachelor’s degree in Engineering, Construction Management, Science, Business, or a related field. * Valid driver’s license and reliable vehicle for travel to project sites. * Strong knowledge of construction methods, materials, and utility standards. * Ability to work independently and in the field under varying site conditions. * Excellent communication, problem-solving, and project coordination skills. * Proficiency in Microsoft Office Suite and construction management tools. What We Offer: * Competitive compensation and benefits package * Opportunities for professional growth and advancement * A dynamic and collaborative work environment CARIAN takes pride in being an Equal Opportunity Employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, citizenship, gender expression or identity, status as a veteran, and basis of disability or any other federal, state, or local legally protected class. As a Woman-Owned Business Enterprise, CARIAN is committed to providing employment opportunities to women, veterans, and underrepresented minorities.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters We are looking for a motivated field service specialist to support customers across the US with technical support and onsite service. You will be part of a dynamic team, ensuring smooth installations, troubleshooting, and repairs of advanced instrumentation. Expect up to 75-90% travel, including some consecutive overnight stays. Key Responsibilities: · Provide onsite and remote technical support for customers · Troubleshoot, diagnose, and resolve technical issues with advanced instrumentation and computer systems. · Perform product installations, repairs, and preventive maintenance. · Manage service cases and maintain accurate records using ServiceMax. · Train customers on equipment usage and maintenance. · Collaborate with internal teams, including sales, R&D, and production, to ensure customer satisfaction. Qualifications: · Strong background in electronics and computer systems, with hands-on experience in PC repair and operating systems. · 1-3 years of experience in a technical or field service role. · Ability to troubleshoot and resolve both hardware and software issues. · Willingness to travel extensively, including consecutive overnight stays · Excellent communication and interpersonal skills. · Proficiency with Word, Excel, SAP, and Salesforce is a plus. · Knowledge of optical systems, or spectroscopy preferred but not required. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual, with a disability and need accommodation during the application/hiring process, please call (732) 494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Customer Support Hotline Engineer is a hands-on role that demands strong technical expertise, organizational abilities, and exceptional communication skills. This position leverages solid experience in electrical systems and controls to provide support to clients across North America, Mexico, and Central America. The Engineer is also responsible for coordinating and delivering hotline support services for both new and legacy customers, working closely with our European hotline teams to ensure seamless global service. This role offers significant opportunities for career growth and involves collaboration across various technical disciplines, including mechanical and electrical engineering, software development, project management, and customer support. The position may require ongoing training and on-site visits, with frequent travel primarily within North America, and occasional extended international travel as needed. Responsibilities • Ability to learn and understand electrical and control aspects of installed systems, • Access and troubleshooting of electro-mechanical components and systems, including PLC and PC communications., • Understanding system applications and how they translate into operational and functional requirements., • Effective, courteous communication with customers and provide technical expertise to guide and aid in issue resolution., • Investigate a root cause analysis or develop another corrective action in resolving issues., • Communicate and coordinate problem resolution actions with engineering, customer support, and other personnel to resolve issues., • Interpret maintenance manuals, schematics, wiring diagrams and other documentation., • Instructs and directs workers in servicing and repairing equipment., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance., • Understand electrical drawings and specifications as they relate to machine control programming., • Strong Customer communication skills., • Develop and implement strategies and standards for training, skills matrix, response and reporting., • Utilize best practices with our European hotline and technical groups,, • Utilize stage gate process in regard to hotline and new systems., • Utilize best practices of Service Now, as defined by Technical Team Leader Required Skills and Abilities • Associates or bachelor's degree in electrical or mechanical engineering, Engineering Technology, technical courses of study or other combinations of experience and training that meet the minimum requirements., • Strong time management and attention to detail, • Strong communication skills: verbal, written and interpersonal, • Excellent Troubleshooting skills, • Ability to handle multiple tasks and work under pressure; sense of both urgency and thoroughness., • Professional, positive, and energetic attitude., • Self-motivated, trustworthy, respectful of others., • Able to travel up to 40% of the time, as per business needs, • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Strong understanding of industrial power, electrical and control circuits and devices., • Good understanding of networks and networking., • Demonstrated capability in PLC programming, with specific focus on SCO Unix, Linux, Siemens, and Allen Bradley based systems., • Ability to interpret schematics, diagrams and other documentation., • Attention to detail and the ability to learn quickly, • Works as part of the team, • Use computer-based tools for communication, trouble shooting, and programming., • To quickly acquire programming skills for machine control platforms Demonstrated expertise of: • Sortation systems, i.e. Crisplant Legacy systems, etc., • Electrical and control troubleshooting Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionDescriptionCME Associates is seeking a highly motivated Water/Wastewater Engineer with 5+ years of experience to join our team in Parlin, NJ. The ideal candidate will play a key role in the planning, design, and implementation of water and wastewater infrastructure projects. This is an excellent opportunity to advance your engineering career with a collaborative and innovative team. Responsibilities • Project Design and Development: Prepare designs, technical specifications, and construction drawings for water distribution, wastewater collection systems, and treatment facilities., • Hydraulic Modeling and Analysis: Conduct hydraulic and hydrologic modeling to optimize system performance and capacity., • Regulatory Compliance: Ensure projects comply with local, state, and federal environmental regulations and permitting requirements., • Assist municipalities and utilities with meeting NJDEP compliance requirements related to drinking water and wastewater regulations, including permitting, reporting, and infrastructure planning., • Construction Support: Provide engineering support during construction, including reviewing submittals, responding to RFIs, and conducting site visits., • Collaboration and Communication: Work closely with multidisciplinary teams, including project managers, surveyors, and environmental scientists, to deliver high-quality solutions., • Maintain and develop strong client relationships by serving as a point of contact, understanding client goals and ensuring satisfaction throughout projects. Qualifications • Education: Bachelor’s degree in Civil, Mechanical, Environmental, or a related Engineering discipline., • Experience: Minimum of 5 years of experience in water/wastewater engineering, including design and project management., • Technical Skills: Proficiency in AutoCAD, Civil 3D, and hydraulic modeling software (e.g., EPANET, WaterCAD, SewerGEMS)., • Licensure: Professional Engineer (PE) license required., • Communication: Strong written and verbal communication skills, with the ability to prepare technical reports and presentations. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionDescriptionCME Associates is seeking a motivated and detail-oriented Entry-Level Civil Engineer who is ready to start their career contributing to meaningful environmental, infrastructure, and solid waste engineering projects. This role will provide hands-on experience in both fieldwork and office tasks, with exposure to site investigation, remediation, landfill design, permitting, and compliance. The successful candidate will work closely with experienced engineers, scientists, geologists, and LSRPs. Responsibilities· Assist in the preparation of workplans, technical reports, and permit applications for site remediation projects (PA/SI/RI/RAW) in accordance with NJDEP Technical Requirements for Site Remediation (N.J.A.C. 7:26E).· Perform field activities such as site inspections, soil and groundwater sampling, and construction oversight under the guidance of senior staff.· Support landfill design tasks, including grading, cell layout, drainage, and leachate collection/treatment system components.· Assist in preparing compliance documentation such as annual bond and topographic survey reports, and regulatory submittals.· Compile, analyze, and interpret data, and assist in the development of figures, plans, and drawings using AutoCAD or similar software.· Coordinate with subcontractors and laboratories as needed.· Maintain strong communication with project managers, clients, and regulatory agencies. Qualifications· Bachelor’s degree in Civil Engineering (Environmental Engineering focus a plus).· 0–3 years of experience in environmental, civil, or landfill-related projects (internships or co-ops welcome).· Familiarity or coursework related to site remediation requirements and landfill operations is a plus.· Working knowledge of AutoCAD, Civil 3D, or similar design software preferred.· Excellent verbal and written communication skills.· OSHA 40-hour HAZWOPER certification (or willingness to obtain).· Valid driver’s license and ability to perform occasional fieldwork at landfill sites and other project locations. What We Offer:· Hands-on training and mentorship in site remediation, permitting, landfill design, and environmental compliance.· Diverse projects that contribute to environmental protection and sustainability.· Competitive salary, benefits, and opportunities for professional growth.· Supportive team environment focused on technical excellence and client service. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description The Quality Assurance Engineer I is responsible for conducting ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer I is expected to: • Maintain SPC limit at or above the corporate target., • Keep customer complaints less than or equal to previous year, • Manage CAR containment and root cause investigation, corrective action plan and completions on time · Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis • Applies GD&T and measurement techniques to review and interpret part print design, quality and intention., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Identifies opportunities for cost reduction and quality improvements., • Audits work processes and evaluates any non-value-added activities or variations in the processes., • Use appropriate statistical techniques to analyze data and make/recommend decisions, • Participates in root cause investigations and development of corrective action plans. Leads verification and effectiveness activities., • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Troubleshoots quality assurance equipment and processes., • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate., • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment, • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · 2-4 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION · ASQ certification is preferred TECHNICAL SKILLS · Blueprint reading and interpretation · Gage design knowledge · APQP · MSA · PPAP · SPC · GD & T · Automated inspection software · MS Office Suite OTHER SKILLS · Manual dexterity · Spatial dexterity · Problem solving o Root cause analysis o Corrective Action · Multitasking · Written communication · Verbal communication · Organizational skills · Time Management While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Project Engineer serves as support for the planning, design, and execution of capital projects while being the primary subject matter expert (SME) for electrical and utility MEP systems during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). Key systems include power distribution (medium/low voltage), UPS, emergency power, lighting, and building utility systems (e.g., process water, gases, vacuum, compressed air). This role focuses on ensuring these systems are designed, constructed, and commissioned to meet performance, reliability, and compliance standards. In addition to project execution, the Project Engineer will provide high-level technical guidance to junior facilities staff and support strategic decision-making for existing systems, but will not be responsible for daily maintenance. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $70,000 - $85,000, based on experience. Primary Responsibilities: Project Execution: • Lead the electrical/utility scope for major capital projects from design review to commissioning., • Review design drawings, technical specifications, and submittals for electrical distribution, backup power, grounding, and utility systems to ensure compliance with codes, project requirements, and best practices., • Coordinate with architects, engineers, and contractors to resolve design and field issues., • Oversee installation, testing, and commissioning of electrical and utility systems, ensuring proper performance verification and documentation., • Support construction scheduling, cost control, and quality management in collaboration with the Senior Construction Manager., • Conduct periodic inspections of existing electrical and utility systems to identify risks or upgrade opportunities., • Advise junior staff and vendors on maintenance strategies, safety protocols, and energy optimization measures., • Set technical standards for CMMS (Computerized Maintenance Management System) data entry and reporting related to electrical and utility systems., • Ensure designs and installations meet all applicable codes (NEC, NFPA, local/state building codes) and industry standards., • Bachelor's degree in Electrical Engineering, Architectural/Building Engineering (electrical emphasis), or a closely related field., • 3+ years of experience in electrical and utility systems engineering within industrial, life sciences, or manufacturing environments., • Proven track record in design review, construction coordination, and commissioning of power distribution and utility systems., • Strong understanding of NEC, NFPA, IEEE, and related electrical codes/standards., • Proficiency in reading and interpreting engineering drawings, specs, and as-builts., • Ability to manage multiple priorities in a fast-paced, project-driven environment., • Experience with process utilities for labs (e.g., DI/RO water, lab gases, vacuum, compressed air)., • Familiarity with Building Management Systems (BMS) and Energy Management Systems (EMS)., • PE (Professional Engineer) license, LEED AP, or equivalent certifications., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionEG&R Engineering PC is a fast-growing multi-disciplinary engineering firm located in Cranbury, NJ. EG&R provides electrical, mechanical, environmental and geotechnical engineering services for a variety of markets including government, utilities/power, waste to energy companies, transit agencies, manufacturing industries, pharmaceuticals, A-E firms/Architects, contractors and various types of commercial clients. EG&R is seeking a Lead Electrical Engineer who is self-motivated and ready to contribute to the future success of EG&R Engineering PC. If you are interested in becoming an integral part of our team, please forward your resume to . Responsibilities: Main responsibilities include creating electrical protection & control and/or physical layout design deliverables for Power Plants and Substations. • Prepare electrical schematics, single lines, calculations, and specifications for the design of electrical distribution systems for Power Plants and Substations., • Supervise and Coordinate Electrical Engineers and Designers in day to day tasks to support project needs., • Review and support the preparation of physical substation design, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material is required., • Develop protection and control designs including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring as required., • Prepare calculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.), • Prepare equipment specifications for procurement, • 4 to 8 years of experience in Engineering and Design for Substations and/or Power Plants, • Bachelor of Science/Master’s degree in electrical engineering (Power Distribution/Power Systems) from an accredited institution., • Desire to obtain Engineer-in-Training (EIT) certification and ultimately Professional Engineer (PE) license, • AutoCAD and/or Microstation experience, • Proficiency with National Electrical Safety Code and IEEE / ANSI Standards, • Strong problem solving, organizational, and interpersonal skills., • Aptitude to work in a team environment, • Excellent written & verbal communication skills, • Strong management skills and a desire to grow professionally, • Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria

Job Description NJ electrical contractor is seeking an experienced electrical construction 3D detailer for our Edison, NJ office to be a part of a team of coordinators and engineers that is proficient with Revit, AutoCAD MEP, Navisworks. Candidates with experience in commercial electrical contracting, preferably with pharmaceuticals, hospitals and/or data centers, are encouraged to apply. Salary up to $130k including company paid medical/dental/401k match Company DescriptionNY/NJ well established electrical contractorNY/NJ well established electrical contractor

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Survey CAD Technician. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Process field survey data to produce topographic, boundary, ALTA, as-built, and construction survey drawings, • Create and maintain CAD drawings using AutoCAD Civil 3D or similar platforms, • Draft plats, legal descriptions, and other survey-related documents, • Collaborate with surveyors, engineers, and project managers to ensure drawing accuracy, • Interpret field notes, sketches, and other documentation, • Organize and maintain digital drawing files and project documentation, • Follow CAD standards and assist in developing best practices, • Support field crews by preparing base files and construction staking sheets Qualifications • 2+ years of experience in a similar CAD technician or survey drafting role, • Proficiency in AutoCAD Civil 3D (or MicroStation/InRoads if applicable), • Understanding of land surveying principles, data collection, and coordinate systems, • Strong attention to detail and accuracy in drafting, • Ability to read and interpret construction and engineering plans, • Excellent organizational and communication skills BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description About Spectrum Vascular Spectrum Vascular is an innovative medical device company focused on vascular access and medication management. Our mission is to improve the lives of patients worldwide by providing caregivers with high quality, innovative products with exceptional customer service. We are a company that was formed through the acquisition of a portfolio of trusted products that have been widely used by customers for decades. Innovation has been a core strategic pillar throughout our history and many of our products have been designed to deliver antimicrobial and antithrombogenic protection or to support certain patient populations such as those who are critically ill and pediatrics. This role represents a unique opportunity to join a dynamic and growing team with established products and an entrepreneurial mindset. Role Description: The Quality Engineer is responsible for providing hands-on support to assure the successful transfer of acquired technology to a contract manufacturing partner on schedule. This position will monitor, maintain, and/or improve the quality and performance of the Spectrum Vascular catheter product portfolio through technical evaluations, maintenance of design history files, and quality support to address user and/or business needs. Key Responsibilities: • Execute activities necessary to support the vascular access business, specifically the PICC and Mid-line catheter portfolio., • Monitors, maintains, and/or improves the quality and performance of the portfolio through technical evaluations, design history file maintenance, and design improvement implementation to address user and/or business needs., • Perform technical evaluations related to supplier and manufacturing changes to existing products., • Perform design change assessments to determine impact of changes to commercial products., • Support new indications, regulations, and marketed regions associated with existing commercial products., • Maintain Risk Management Files for existing products based on post market surveillance., • Interfaces with external suppliers and internal project teams to ensure the quality of Spectrum Vascular products., • Review test protocols and reports to support development and transfer of projects., • Ensure all activities are executed in alignment with design controls, with the proper documentation for traceability. Support Regulatory filing activities (per 21 CFR 820.30, 21 CFR part 4, ISO 13485), and work closely with team to establish and maintain design control procedures., • Partner with functional areas to develop appropriate prioritization plans and appropriately escalate changes in resource demand, risks, gaps, or challenges., • Facilitate decision-making, collaboration, and problem-solving with people at all levels of the organization to accomplish shared program., • Bachelor's degree in mechanical or biomedical engineering preferred., • Three years-plus of relevant medical device industry experience in quality engineering and/or manufacturing operations., • Knowledge and understanding of molding and extrusion operations, as well as assembly, labeling, and packaging., • Good understanding of FDA regulations, QMS, GMP and ISO standards., • Experience managing diverse project activities with contract CMO facilities, and in particular managing and communicating quality requirements between vendors., • Strong computer skills including proficiency in Excel, Word, SolidWorks, eQMS, and statistical methods., • Hands-on, roll-up-your-sleeves approach with high sense of urgency and drive for results., • Natural entrepreneurial spirit with unrelenting dedication to delivering results., • Desire to work in a fast-paced, innovative environment., • Remote-based, • Dynamic, interactive, fast-paced, and entrepreneurial environment, • Travel – up to 35%, additional may be required during execution of validation activities Spectrum Vascular is an Equal Opportunity Employer and committed to creating a diverse and inclusive company culture. Spectrum Vascular does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law. ime.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. Job Description The FSE I/II performs Calibrations/Qualifications, Preventative Maintenance and Repairs on pipettes and various types of small laboratory instrumentation. Responsibilities • Perform calibration/qualification and preventative maintenance in the lab on single channel and multi-channel pipettes., • Travel to customer sites to perform pipette calibrations and PM’s as necessary., • Perform troubleshooting and repair of various types of small laboratory equipment both in the field and in the lab., • Manage personal parts inventory effectively., • Provide feedback to Manager regarding any issue impacting service delivery, particularly issues impacting turnaround times., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management.Qualifications Requirements • Two- or four-year degree in a related science field (e.g., chemistry, analytical chemistry, electronic engineering, biotechnology, or similar) plus 0-1 years (FSE I) or 1 to 3 years (FSE II) experience in a related field, preferably as a Field Service Technician, • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Clear, respectful, and timely verbal and written communication, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Position is a Full-Time Monday-Friday, 8am-5pm, with additional hours as needed. Candidates within commutable distance to North Brunswick, NJ are encouraged to apply. Compensation: $28-$30/hr Excellent full time benefits including comprehensive medical coverage, dental, and vision options • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2024, Eurofins generated total revenues of EUR € 6,515 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The FSE III/IV performs Calibrations/Qualifications, Preventative Maintenance and Repairs on small laboratory instrumentation, including balances and pH meters, and chromatography systems, including HPLC’s, GC’s and UPLC’s. Responsibilities • Perform troubleshooting, preventative maintenance and repair both in the field and in the lab of various types of laboratory equipment including balances, pH meters, environmental monitoring equipment, plate readers, GC’s, HPLC’s and UPLC’s., • Travel to customer sites to perform pipette calibrations and PM’s as necessary., • Manage personal parts inventory effectively., • Provide feedback to Manager regarding any issue impacting service delivery, particularly issues impacting turnaround times., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management.Qualifications Minimum Qualifications • Two- or four-year degree in a related science field (e.g., chemistry, analytical chemistry, electronic engineering, biotechnology, or similar) plus 3-5 years (FSE III) or 5-7 years (FSE IV) experience in a related field, preferably as a Field Service Technician, • Experience in providing field service support on GC’s, HPLC’s and/or UPLC’s., • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Clear, respectful, and timely verbal and written communication, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Working schedule will be Full-Time, First Shift, M-F 8am-4pm. Candidates currently living within a commutable distance of North Brunswick Township, NJ are encouraged to apply. No relocation assistance will be given. This position is NOT remote. What we Offer: • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job DescriptionDescriptionCME Associates is seeking a highly motivated Engineer Intern to join our dynamic team. This position offers an excellent opportunity for a recent graduate or current student pursuing a degree in engineering to gain hands-on experience in the field. The Engineer Intern will work closely with our engineering team, assisting in various projects and tasks to support our clients and contribute to the success of our firm. Responsibilities • Assist in Engineering Design: Collaborate with senior engineers to assist in the design and development of engineering plans, drawings, and specifications for various projects, ensuring compliance with industry standards and client requirements., • Field Work Support: Participate in field surveys, inspections, and data collection activities to gather essential information for project planning and execution. Assist in analyzing data and generating reports as needed., • Technical Analysis: Conduct research and analysis to support engineering calculations, feasibility studies, and technical evaluations. Utilize engineering software and tools to perform simulations and modeling under the guidance of experienced engineers., • Project Coordination: Assist in project coordination efforts by organizing project documents, tracking project timelines, and communicating with team members and clients to ensure smooth project execution and timely delivery., • Continuous Learning and Development: Proactively engage in learning opportunities to enhance technical skills and knowledge in various engineering disciplines. Seek mentorship from experienced professionals and actively participate in training programs offered by the company. Qualifications • Educational Background: Pursuing or recently completed a Bachelor's degree in Civil Engineering, Environmental Engineering, or a related field from an accredited institution., • Technical Skills: Familiarity with Microsoft Office Suite, particularly Excel and Word. Experience with engineering software such as AutoCAD, Civil 3D, and/or GIS is a plus., • Strong Analytical Skills: Ability to analyze technical data, perform calculations, and interpret engineering drawings. Demonstrated problem-solving skills and attention to detail., • Effective Communication: Excellent verbal and written communication skills. Ability to communicate technical information effectively with team members and clients.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments. Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionDescription: Endpoint Management Engineer with advanced engineering, architecture, and Tier 3/4 expertise in DoD hybrid IT environment. This role is responsible for delivering forward-looking, compliant, and standardized endpoint solutions across virtual, physical, mobile, and cloud-based platforms. The engineer will play a key role in application integration, endpoint security, desktop engineering, mobile device management, and enterprise application packaging. Requirements: Education & Experience • A BS degree in Information Technology, Cybersecurity, Data Science, Information Systems, or Computer Science OR Certifications • Expertise in Microsoft Endpoint Configuration Manager (MECM/SCCM), Microsoft Intune, Active Directory, Azure AD, Group Policy, and MDM solutions., • Design, engineer, and support enterprise endpoint management frameworks that enable standardized application delivery, monitoring, and lifecycle support., • Architect and maintain Enterprise Management tools (e.g., MECM, Intune, Azure AD, MDM platforms)., • Provide automation, scripts, and configurations to support application lifecycle management., • Ensure compliance with DISA STIGs, NIST guidance, and IAVM requirements., • Conduct security risk assessments and vulnerability analyses for endpoints and applications., • Maintain and modernize desktop image libraries, OS builds, task sequences, and baseline configurations., • Enhance end-user experience through optimized OS delivery, application provisioning, and endpoint standardization., • Engineer migration plans from legacy MDM tools to modern cloud/SaaS-based solutions., • Ensure secure and compliant delivery of mobile services aligned with DoD and DHA standards.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OSIS division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OSIS Division is searching for an experienced Lead Test Engineer for our North American operation located in Piscataway, New Jersey.The ideal candidate will possess a strong and proven test and measurement background for volume production validation of all electronic circuit boards incorporated into our analytical instruments and light detecting systems involving CCDs, PDAs, InGaAs, and CMOS sensors and related to both spectroscopy and imaging applications.If you are a self-motivated individual with a passion for your work that has garnered success in leading and contributing to team-oriented product development efforts, please keep reading and visit our corporate website to learn more Qualifications: • Advanced degree preferred in electrical engineering or computer engineering with 7+ years of directly related experience., • Minimum of a BSEE degree with 10+ years of directly related experience., • Will accept 15+ years of equivalent engineering design experience associated with test and validation of electronic circuit boards for data acquisition products and/or analytical instruments requiring a high level of field-deployed reliability. Responsibilities: • Develop the test methods and procedures needed to transition products from design into volume manufacturing., • Design accurate test circuits to validate functional performance of end-product detector/camera electronic board assemblies incorporating low-noise analog, power, and high-speed digital circuitry and interfaces., • Design, document, and maintain test fixtures for a volume electronic board turnkey manufacturing environment., • Collaborate with the internal design team and external contract MFG to identify, define, and resolve test issues., • Analyze and interpret test results to identify design and/or test-related problems. Requirements: • Solid understanding of electrical engineering principles in both analog and digital circuits, • Familiarity with low-noise analog and mixed-signal circuits involving op-amps, voltage references, LDOs, DACs, ADCs, and discrete semiconductors., • Demonstrated proficiency in circuit design for test and validation, • Experience with circuit modeling and simulation techniques, • Ability to guide and oversee PCB CAD designers for test fixture board design and development, • Familiarity with test equipment, including oscilloscopes, DVMs, power supplies, and Function Generators, • Sound test & troubleshooting skills., • Demonstrated technical leadership and management skills., • Strong problem-solving, communication, and interpersonal skills. Preferred: • Testing knowledge of electronic boards used in CCD/CMOS detector/camera products, • Experience testing densely populated surface mount electronic boards, • Background in LabVIEW programming a plus HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please email Jo Brodbeck or call (248) 925-1012 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job Description Process Engineer Reports to: Director of CNC Operations & Process Improvement FLSA Status: Exempt; Professional Exemption.. Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on the afternoon shift (3 PM – 11 PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • 5+ years of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed. Preferred Skills and Experience: • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Why Join Us? • Work in a fast-paced, innovative environment with room for growth and career development., • Competitive compensation, shift differential, and comprehensive benefits package., • Opportunity to lead impactful projects and gain exposure to high-end manufacturing Physical qualifications and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: Senior Identity & PKI Engineer to design, implement, and maintain enterprise-class identity, credential, and access management (ICAM) solutions. Deep expertise in directory services, PKI/PKE engineering, cryptographic key management, and privileged access solutions — with proven experience delivering secure, compliant, and forward-looking architectures in DoD environments. Requirements: Education & Experience A BS degree in Information Technology, Cybersecurity, Data Science, Information Systems, or Computer Science OR A BBA in the same technical fields is also acceptable, provided it is not pursued as a minor. The degree must include courses in applied and natural science, computing, engineering, and engineering technology. Secret Clearance Required Certifications: Microsoft Certified: Azure Administrator Associate or Microsoft Certified: Windows Server Hybrid Administrator Associate OR Microsoft Certified: Cyber Security Architect Expert or Microsoft Certified: Azure Solutions Architect Expert Key Tasks: • Engineer, design, update, and maintain Microsoft Active Directory Services (ADDS/ADLDS) and integrated secure DNS roles., • Ensure compliance with DISA STIGs, DoD ICAM Reference Design, and DoDI 8520.03., • Engineer solutions for identity automation, attribute aggregation, and policy-driven access control across cloud, SaaS, and enterprise systems., • Engineer and maintain implementation of DoD PKI and DHA PKI Internal Medium Assurance (IMA) infrastructures., • Provide technical documentation, engineering packages, and risk assessments for PKI modernization efforts., • Manage cryptographic key lifecycle processes, certificate validation suites, and cross-certifications., • Engineer and support Privileged Identity and Access Management (PIM/PAM) solutions, enforcing least privilege principles., • Expertise in DoD security directives, DISA STIGs, and DHA cybersecurity requirements.

Job Description Technical Staffing Resources (TSR) is seeking an Electrical Engineer to work with one of the largest EPC firms in the country. This is a long-term contract position in Parlin, NJ. Electrical & Instrumentation Engineer As an Electrical & Instrumentation Engineer, you will perform advanced engineering techniques, makes decisions on engineering problems and methods, and interfaces with the client to define project scope. Required to perform electrical engineering and design assignments associated with production, maintenance, process, capital projects, R&D, and power distribution involving the application of established electrical technology and principles, including performing all electrical calculations, and often requiring coordination with other engineering design, and cross-functional competencies to provide economical and expedient task implementation. The assignment will include participation in all electrical functions associated with projects including assistance with front end loading, production design, electrical construction management, commissioning, startup, and troubleshooting activities. Provides technical guidance to designers and less experienced engineers and is consulted extensively by the associates and others with a high degree of reliance placed on scientific interpretations and advice. Job role is responsible for a measurable asset including but not limited to forecasting & budget. Responsibilities · Functions as a project lead for a small project or an area lead for larger projects. · Scope definition from receipt of basic data to Issue for Design process deliverables · Interface with the clients’ cross functional teams to define all operating requirements. · Responsible for study, design, specification, and services related to electrical systems including power generation, power systems performance and control, cabling and wiring, lighting, motor control centers, communication systems, cathodic protection, grounding, lightning protection, heat tracing, etc. · Responsibility for assessing the quality, robustness, and capability of newly designed and installed Capital Projects. · Industrial electrical power distribution ranging from high voltage (greater than 35kV), medium voltage (1kV through 35kV) through low voltage (120V through 1kV) · Electrical power distribution equipment such as generators, substations, switchgear, transformers, motor control centers, distribution panels · Electrical utilization equipment such as motors (AC and DC), controllers, electrical process equipment · Electrical drawing knowledge (reading and generation via MicroStation V8): · Single Line Diagrams · Three Line Diagrams · Schematic Diagrams · Wiring Diagrams · Physical Drawings · Involved in discussions around the control of the process. Frequently pulls in additional technical resources for making decisions about the project viability and resolve any safety concerns or hazards. · Provides engineering, Checkout and Qualification for the Capital Project process control systems, such as distributive control systems and components, instrumentation technology, and programmable logic controllers. · Overall responsibility for design, specification, selection, and services relating to instrumentation and control systems including basic process control systems, safety systems, control panels, analyzer systems, field instrumentation, valves, etc. · May self-perform or lead other engineers to complete project scope and provide technical guidance to less experienced engineers. On some occasions, will also plan, schedule, and conduct work requiring independent judgment and adaptation of engineering techniques. · Participation in Process Hazard Analysis for project-related work. · Define the process design basis for other disciplines, specifically Electrical Systems, conduit sizing, and Instrumentation and interface with these groups throughout detailed design. Leading multidisciplinary small project teams across several different businesses and site infrastructure. · Develop project estimates, scopes, and schedule. May lead estimate reviews. · Work with Construction Manager during FEL as well as to oversee project execution in the field. · Forecasting and project cost tracking, monthly. · Manage scope change technically and commercially. Requirements · Bachelor’s degree in electrical engineering or Control Systems · Must have a good understanding and knowledge of industry codes and standards (NFPA 70E/NEC, OSHA, IEEE, ANSI, NEMA, API, and ASI. · 8+ years of qualified related experience · Experience in the chemical, refining, or biofuels industry required. · Experience with P&ID Development, equipment sizing, electrical calculations, and instrumentation. Demonstrated leadership of process design on capital projects, including responsibility for budget, schedule, and change management. · Professional Engineering (P.E.) license preferred but not required. PHYSICAL REQUIREMENTS · Work is located at a chemical plant and requires exposure to ambient temperature extremes · Work may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat and steel-toed boots · Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs frequently, etc · Work requires moderate physical exertion including walking to operating areas and walking up stairs · Assignments may require conducting plant walkdowns and wearing chemical plant or refinery PPE to include an H2S monitor, escape respirator, and FP coveralls. Company DescriptionTechnical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.Technical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionDescriptionCME Associates is seeking a Traffic Engineer to join our team in East Brunswick, NJ. The ideal candidate will have expertise in traffic analysis, signal design, and transportation planning. Responsibilities • Traffic Analysis & Modeling: Conduct traffic impact studies, capacity analysis, and safety evaluations using industry-standard software., • Signal & Intersection Design: Design traffic signals, roadway signage, pavement markings, and intersection improvements following NJTA, NJDOT and MUTCD standards., • Transportation Planning & Studies: Develop traffic control plans, detour plans, and transportation management strategies for public and private sector projects., • Regulatory Compliance & Permitting: Prepare reports, design documents, and permit applications to ensure compliance with NJTA, NJDOT, MUTCD, AASHTO, and local transportation agencies., • Plan Development & Software Utilization: Prepare technical drawings and design plans using CAD software, with a preference for MicroStation. Qualifications • Education: Bachelor’s degree in Civil Engineering, Traffic Engineering, or a related field., • Licenses & Certifications: PE and PTOE required., • Experience: 4+ years of relevant experience in traffic engineering, including signal design, roadway safety analysis, and transportation planning., • Technical Skills: Proficiency in traffic analysis software (e.g., Synchro, HCS, VISSIM) and CAD software (MicroStation preferred)., • Regulatory Knowledge: Familiarity with NJTA, NJDOT, MUTCD, AASHTO, and local traffic engineering standards and guidelines. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Lead Facility Engineer serves as the primary technical subject matter expert (SME) for mechanical, electrical, and plumbing (MEP) systems—particularly HVAC—during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). This role is responsible for ensuring that new facilities are designed, constructed, and commissioned to meet performance, safety, and compliance requirements. In addition to capital project responsibilities, the Lead Facility Engineer will provide high-level technical oversight of existing facilities, advising junior staff and aligning operational decisions with long-term reliability and efficiency goals. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $90,000 - $105,000, based on experience. Primary Responsibilities: • Serve as the HVAC/MEP technical lead for major capital projects, from design through commissioning., • Review and validate design documents, technical specifications, and contractor submittals for compliance with project requirements, codes, and best practices., • Coordinate with architects, engineers, and contractors to resolve design or field issues and ensure alignment with operational needs., • Oversee installation, testing, and commissioning of MEP systems, ensuring performance verification and turnover documentation are complete., • Support construction scheduling, cost control, and quality management, in collaboration with the Senior Construction Manager., • Lead and document punch list resolution for MEP scope., • Conduct periodic inspections and assessments of major building systems to identify risks or improvement opportunities., • Provide technical guidance to junior facilities staff and vendors managing day-to-day maintenance., • Lead the development and oversight of preventive maintenance plans for all facility-owned equipment (e.g., air handlers, boilers, pumps, compressors)., • Set standards for CMMS (Computerized Maintenance Management System) usage and review work order trends, costs, and completion rates for improvement opportunities., • Oversee the planning and supervision of facility routines, preventive maintenance, and operational readiness across all sites., • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil/Structural Engineering, Architectural/Building Engineering, or a closely related field., • 4-6+ years of relevant experience in facilities/MEP engineering, construction, or capital projects within industrial, life sciences, or manufacturing environments. Includes experience in HVAC preventative maintenance, balancing, assessment, and knowledge of fabrication techniques., • 2+ years in a technical lead or supervisory capacity., • Proven experience as an HVAC/MEP SME on large capital projects (design review, field coordination, installation oversight, commissioning)., • Experience with AutoCAD and MS Office., • Ability to read and interpret drawings, specs, and submittals, and coordinate RFIs/field changes., • Strong knowledge of the building process, construction principles, relevant codes, and industry standards., • Knowledge of controls and BMS (Building Management Systems)., • Demonstrated ability to set up and oversee preventive maintenance strategies for mission-critical equipment., • Experience in construction administration, commissioning, and startup of HVAC and mechanical/plumbing systems., • Experience in commissioning and system startup., • Understanding of EAV (Exhaust Air Valve), fume hoods, and ventilation requirements in specialized facilities., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Master's Degree in appropriate engineering discipline is preferred. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction manag

Conducts hardware and software maintenance and support. Special events coverage, meeting room & VCON & voice devices support.

AECOM is hosting an exclusive, invitation-only hiring event in New York, New York October 15-17. The event kicks off on Wednesday evening with a networking mixer from 6-8 pm. We take on the most complex challenges and pioneer innovative, iconic solutions that push the limits of what's possible - the

Advanced degree in Electrical Engineering or Computer Engineering with 5 yrs of directly related experience. Presently, our HORIBA Scientific OEM Division is searching for an experienced Electrical Hardware Design Engineer for our North American operation located in Piscataway, New Jersey. The ideal

Broadcast Engineer is a highly organized, detail oriented, and self-motivated individual with outstanding communication, engineering and production skills. Broadcast Engineer is responsible for maintaining and improving broadcast systems and providing overall technical support to a 24/7 local news f

Strong background in scale or scaling up facilities (R&D to Manufacturing) 2.P&IDs (AutoCAD, Plant 3D, SolidWorks) 3.Experience: 8-10+ years in chemical engineering, with a strong background in process scale-up and facility design.Process Engineer plays a critical role in leading the design, scale-u

Senior Architect - Mission Critical Facilities. New Jersey Data Center growing Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. We a

As a Security Engineering Leader at Audible you will advocate for information security throughout all our software development and business processes. Apply your security and business knowledge to drive secure and pragmatic improvements broadly to Audible services, making technical trade-offs betwee

Collaborate with stakeholders to envision, design, develop, test, and launch customer-centric software solutions. Foster continuous improvement in software quality, customer experience, and product maintainability. Mentor and lead developers, fostering curiosity and deep technical understanding.