Trabajos Engineering en Jamaica, New YorkCrear alertas

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

IMC Architecture is an energetic firm looking for a talented individual to help grow our practice. Our work includes ground-up and renovation of medium to large-scale multi-family residential, commercial, and mixed-use projects. Responsibilities will include site surveying, planning, production of design development and construction documents, construction administration, site meetings, and direct client interaction. Candidates must be self-motivated, reliable, and able to manage all aspects of a project. Candidate Qualifications: • Bachelor's or Master’s degree in Architecture., • 15+ years of professional experience in an architectural office., • Client Account Management requires strong personal relationship skills, • Perform and/or supervise the design and drafting of production of design drawings., • Supervise the work of team members and coordinate documents with clients., • Coordinate full drawing sets and prepare construction specifications., • Knowledge of construction materials, details, and methods., • Understand NYC codes and zoning., • Relevant NYC experience., • Manage shop drawing review process., • Motivate and inspire team members throughout the project., • Proficiency in Revit. We are looking for highly motivated individuals willing to take on responsibility and grow with our team. We encourage people who are detail-oriented, collaborative, and eager to take on challenges to contact us. Qualified individuals should: • Provide salary requirements in the body of your cover letter. *Applications without salary requirements will not be considered.

C.A.C. Industries is a successful and growing heavy/civil construction contractor in New York City and Tri-state area. C.A.C. employees are driven by four Core Values: It’s Always WE, Be Green & Lean, Educate to Transform, and Be Humble & Kick Ass. These Core Values help us achieve our Core Purpose of creating Unlimited Opportunities. Our company culture has led us to being listed on Crain's Best Places to Work in NYC for the last five years. We are currently seeking a full-time Project Engineer to join our project team. The Project Engineer will play a crucial role in ensuring the smooth execution of the project, delivering exceptional results, and maintaining our commitment to quality and safety. The salary range is $90k - 120k annually (negotiable depending on experience). We offer a competitive salary, great benefits, and excellent work culture. Key Requirements: • Bachelor’s degree in Civil Engineering or related field, • 3-6 years of experience in the heavy civil construction industry, • Knowledge of excavation, foundation work, and piping systems, • Advanced level in Microsoft Office Applications (Word, Excel, Power Point, Outlook etc.), • Hands-on experience with both concrete and steel structures, • Knowledge of design and visualizations software such as AutoCAD / MS Project is preferred, • OSHA 30-hr certification (within the last five years preferred), • Desire to work in a field environment with client personnel and construction crews, • Detail-oriented with a focus on quality and accuracy, • Flexibility to work in a fast-paced environment and adapt to changing priorities, • Strong communication and interpersonal skills, with the ability to collaborate with diverse teams Responsibilities: • Day-to-day interaction with subcontractors during their field operations and client’s field representatives, • Prepare and submit daily reports, • Track quantities and hours for field activities, • Monitor the progress of field construction activities to assure compliance with project plans and specifications, • Assist in preparing and submitting look ahead schedules, • RFI’s including preparing, submitting, and tracking, • Order daily construction supplies, maintain field purchase log and process change orders, • Obtain and manage road closure permits and maintain a permit log, • Participate in jobsite safety reviews, toolbox meetings, safety meetings, and safety trainings, • Track equipment and materials What We Offer: • Employee Stock Ownership Plan, • Medical, Dental and Vision Insurance, • 401k Retirement Plan with Company Match, • Employee Assistance Program, • Life Insurance Plans, • Disability, • Career Development through mentorship program, learning & development, continuing education The above description is intended to provide a general overview of the responsibilities and requirements associated with the Project Engineer position. The job responsibilities may evolve and change over time to align with the needs of the projects and the organization.

C.A.C. Industries is a successful and growing heavy/civil construction contractor and is 100% employee owned. We were featured on Crain's New York Business list for 'Best Places to Work' five years in a row due to our superb company culture and strong values. We live by our Core Purpose which is UNLIMITED OPPORTUNITIES! We are always looking to grow our team with talented individuals that will contribute to team goals and meet deadlines. We are currently seeking a full-time Estimator to join our team in Long Island City, Queens NY. The Estimator will report to the Chief Estimator and work closely with the rest of the team. The main responsibility will be to prepare heavy civil bids and estimates by performing takeoffs, creating proposals, inputting data, and communicating with subcontractors and partners. The salary range is $125k - $150k annually depending on experience. Responsibilities: • Perform efficient take-offs and compile bid pricing for heavy civil projects, • Review project drawings, specifications, and addenda to fully understand project scope, • Evaluate and compare subcontractor and vendor quotes for accuracy, • Develop pricing for bids and change orders, both independently and with a team, • Review bids for constructability and identify potential value-engineering opportunities, • Lead and contribute to proposal submissions and design-build efforts, • Create and manage project bid schedules with associated milestones, • Conduct business with 100% integrity and professionalism Qualifications: • Bachelor’s degree in civil engineering, construction management, or related field (or equivalent practical experience), • 4+ years of experience in Heavy civil estimating or related experience, • Knowledge of contracts, proposals, and insurance programs, • Knowledge of bidding with NYC Agencies and agencies around the tri-state area, • Knowledge of Design-Build a plus, • Proficient in reading heavy civil construction drawings & blueprints, • Proficient in Microsoft Outlook, Word, and Excel, • Experience using HCSS, BlueBeam, AutoCAD, and B2W preferred, • Familiarity with subcontractor and vendor scopes of work, • Strong organization and planning skills, • Excellent interpersonal, verbal, and written communication skills in English, • Ability to complete projects under tight deadlines What We Offer: • Employee Stock Ownership Plan, • Medical, Dental and Vision Insurance, • 401K Retirement Plan with Company Match, • Employee Assistance Program, • Life Insurance Plans, • Disability, • Career Development through Mentoring Program, Learning & Development, Continuing Education The above description is intended to provide a general overview of the responsibilities and requirements associated with the Estimator position. The job responsibilities may evolve and change over time to align with the needs of the projects and the organization. C.A.C. Industries Inc. is an equal opportunity employer committed to diversity and inclusion in the workplace.

C.A.C. Industries is a successful and growing heavy/civil construction contractor in NYC. C.A.C. employees are driven by four Core Values: It’s Always We, Be Green & Lean, Educate to Transform, and Be Humble & Kick Ass. These Core Values help us achieve our Core Purpose of Creating Unlimited Opportunities. Our company culture has led us to being listed on Crain's Best Places to Work in NYC for the last five years. We are currently seeking a highly organized and detail-oriented Contracts Manager to join our in-house legal team. The ideal candidate will support legal counsel and risk management by creating and managing contracts, claims, insurance compliance, and regulatory requirements. This role will also focus on MBE, WBE, and DBE compliance, ensuring adherence to federal, state, and local diversity requirements in construction projects. The salary range is $80k - $110k annually (negotiable depending on experience). Qualifications & Skills: • Associate’s or Bachelor’s degree; Paralegal certification preferred., • 3+ years of experience in construction law, contracts, insurance, or regulatory compliance., • Strong negotiation skills, such as negotiating contract terms with subcontractors., • Proficiency in creating and redlining contracts., • Strong understanding of construction contracts (AIA, DBIA, and custom contracts), insurance policies, and claims management., • Excellent organizational skills with the ability to handle multiple projects and deadlines., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and contract management software., • Strong written and verbal communication skills., • Ability to work independently and collaboratively in a fast-paced construction environment. Preferred Qualifications: • Experience working for a construction company, general contractor, or engineering firm., • Knowledge of public works and government contracting requirements., • Familiarity with litigation support and e-discovery processes., • Familiarity with MBE, WBE & DBE regulations and diversity compliance reporting. Key Responsibilities: Contracts & Agreements: • Assist in the drafting, reviewing, and negotiation of various construction-related agreements, including subcontracts, purchase orders, and vendor agreements., • Ensure contract compliance with company policies, industry regulations, and project requirements., • Maintain a database of contracts and track key deadlines, renewals, and obligations. Claims Management: • Support in the preparation, documentation, and management of construction claims, disputes, and change orders., • Assist in investigating and gathering evidence for potential claims, working closely with internal project teams., • Maintain records and coordinate with outside counsel, insurance adjusters, and other stakeholders as needed. Insurance & Compliance: • Ensure compliance with insurance policies, certificates of insurance (COIs), and risk management requirements., • Work with insurance brokers and project managers to ensure adequate coverage and policy renewals., • Monitor and track compliance with contractual insurance requirements. MBE, WBE & DBE Compliance: • Assist in preparing and submitting Minority Business Enterprise (MBE), Women Business Enterprise (WBE), and Disadvantaged Business Enterprise (DBE) compliance reports., • Maintain records of subcontractor and supplier participation to meet government and project-specific diversity requirements., • Communicate with subcontractors and vendors to collect necessary certification documentation., • Ensure compliance with federal, state, and local diversity contracting laws. Legal Support & Administration: • Conduct legal research on construction law, compliance issues, and regulatory changes affecting the industry., • Maintain organized legal files, correspondence, and documentation., • Assist in responding to legal inquiries and audits from government agencies or project owners., • Support corporate governance matters, including maintaining business licenses and legal entity records. This is an excellent opportunity for a detail-oriented professional to play a crucial role in a dynamic construction company. If you have experience in construction law, contracts management, and/or compliance, we encourage you to apply. The above description is intended to provide a general overview of the responsibilities and requirements associated with the Contracts Manager position. The job responsibilities may evolve and change over time to align with the needs of the projects and the organization. C.A.C. Industries Inc. is an equal opportunity employer committed to diversity and inclusion in the workplace.

Job DescriptionLocation: New York Job Type: Full-Time Salary: Competitive, base on experience Benefits: Health, 401(K) At the company, we are dedicated to providing innovative engineering solutions for a wide range of building systems. We specialize in designing and optimizing mechanical, electrical and plumbing systems to help create sustainable and efficient environments. Our team works collaboratively on projects of all sizes, delivering high-quality solutions that meet our clients' needs. We are seeking a highly skilled and motivated MEP Engineer to join our team. As an MEP Engineer, you will work closely with architects, contractors, and your team to ensure that systems are efficient, cost-effective, and compliant with all regulations and client specifications. Responsibilities include but are not limited to the following: • ·Design and review HVAC, electrical, fire alarm, plumbing, and sprinkler systems for various projects using AutoCad., • Perform calculations and estimate sizes of systems for projects of all sizes., • Create plans, schematics, make equipment selections, load calculations, systems narratives and specifications., • Conduct field surveys and site evaluations., • Confer with other consultants, clients, and contractors to resolve issues and provide technical information/solutions., • Discuss and provide feedback on equipment selections with manufacturers representatives and project managers., • Research and analyze design specifications, manuals and other data to evaluate the feasibility, cost and maintenance requirements of designs., • Review applicable design standard requirements, codes and regulations as they relate and impact design development., • Complete assignments in a timely manner required to meet deadlines.Qualifications:, • Bachelor’s degree in Mechanical, Electrical, or a related field., • Proficient in AutoCad and/or Revit, • Proven experience as an MEP Engineer, with expertise in designing MEP systems in commercial and residential buildings., • Strong communication, analytical, and interpersonal skills, • Preferably multi-disciplinary and has strong knowledge of Mechanical, Electrical, and Plumbing systems and local building codes, regulations, and industry standards., • Ability to quickly assess building systems and equipment., • Capable of time management and continued organization., • Ability to multitask and work effectively in a team or individual situations., • Strong problem-solving and critical-thinking abilities., • EIT or PE preferred

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary: A LaserAway Laser Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations. Continuous assessments and improvements allow our team to remain efficient and effective at LaserAway. Compensation: $90,000-$95,000 Annual Salary Overall Responsibilities: • Oversee all laser maintenance within the assigned territory, • Monitor ticket system, communication platforms, and emails for prompt responses, • Support New Store Openings by ensuring all equipment is functional, • Contribute to positive moral environments within clinic operations, • Establish positive co-worker partnerships for operational effectiveness, • Timely ticket responses to ensure operational readiness, • Ability to exceed expectations and aid in improving overall operations, • Exercise critical thinking and prioritize tasks based on business needs, • Contribute to the support system and demeanor for our clinic teams, • Professionally address non-work related topics with the team, • Prepare Weekly Reports to discuss overall equipment status and updates, • Contribute to a high morale and stress-free environment, • Ensure availability during all clinical operating hours, • Communicate any support needed in advance and professionally, • Properly utilize the communication channels with professionalism, • Coordinate with the medical team to assist in additional equipment training, • Maintain company vehicle in good standing and maintenance, • Maintain a minimum of 8 locations and or 100 medical devices, • Self-sufficient and creating a work schedule, • Support new clinics by scheduling time and meeting all equipment deadlines, • Support new clinics by completing all checklist responsibilities, • Excellent prioritization skills with high-priority to low-priority tasks, • Apply attention to detail to all maintenance processes, • Coordinate with 3rd party equipment repairs and facilitate issues/replacement parts and utilize efficient communication, • Absorb and continuously learn all maintenance procedures, • Nomenclature of Parts, • Part functions and interconnections, • Fault isolation of electrical components, • Optic Alignments, • Energy Software Calibrations, • Disassembly and reassembly of sub-components, • Minor wire splicing, harness repair, and soldering, • Schedule and perform routine maintenance on equipment and respond to on-call laser issues, • Ability to reinspect and quality check all individual processes, • Ability to request assistance to avoid negative business impacts, • Ability to invest time into advancing and seeking more knowledge, • Ability to manage stress and multiple issues efficiently, • Timely service call submissions and meeting attendance, • Ability to communicate professionalism and proper etiquette, • Communicate effectively to all teams, including down equipment or estimated times of repair, • Inventory Control- Maintain and account for all parts routinely, • Ability to adjust Preventative Maintenance schedule given other urgent tasks, • Ability to return damaged/repair parts and manage logistics effectively, • Ability to professionally address recommendations to management, • Ability to multitask while maintaining operational readiness, • Availability- Flexible with the on-call schedule and the ability to adjust per the needs of the operation, • Proficient computer skills including the use of email, video conferencing, Google spreadsheets, and ticket management systems, • Team player and supportive while covering for others, • Flexibility to cover out-of-state or out-of-territory remote clinics, • Proficiency with repair tools and techniques, • Excellent time management, organization, and prioritization abilities, • Maintain ongoing communication with the management and clinic team, • Knowledge of Electrical Safety and Theory, • Strong drive to complete tasks timely, • Maintain a clean driving record and valid identification, • Critical Thinking skills, • Punctual and accurate reporting, • Excellent verbal and written communication skills, • Strong analytical and problem-solving skills., • Ability to develop management skills, • Ability to prioritize tasks and delegate them when appropriate, • Preferred Education, bachelor's degree in the following fields, • Biomedical Engineering, • Project Management, • Electrical Engineer, • Any engineering, • Electrician, • HVAC, • Ability to work before, during, and after business hours, including weekends, • Conduct video meetings with a professional appearance, • Ability to organize the company vehicle, tools, and parts inventory, • Ability to maneuver and or climb an 8ft ladder, • Ability to stand for periods exceeding up to 4 hours, • Ability to drive up to 8 hours per day, • Ability to roll and or carry a tool bag to and from each clinic, • Ability to transport equipment up to 250lbs from location to location, • Ability to load and unload equipment in a company vehicle with a ramp inclined at 25 degrees, • Flexible to drive or fly to another territory and or out-of-state clinics, • Support other Laser Engineers during time off, emergencies, or as requested by management, • Ability to travel out of the territory for up to 5 days at a time LaserAway offers a generous pay structure with additional earning potential through performance review. Additional benefits include (but not limited to): • Healthcare benefits, • Dental, Vision, and 401(k), • Paid Time Away (PTA), • Generous employee discounts This job description is not all inclusive. In addition, LaserAway reserves the right to amend this job description at any time. LaserAway is an Equal Opportunity Employer. Employees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position.

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Senior HVAC Engineer Type: Full Time / Part Time Location: New York City About the Job NY Building Systems Consultant Inc. (NYBSC) is a Professional Engineering and Energy Consulting Company. It was formed by industry professionals that each has a more than 10 years’ experience. NYBSC Energy and Engineering team is comprised of individuals with complete industry certifications including NYS & CTS Registered Professional Engineers (PE), Existing Building Commissioning Professional (EBCP), Certified Energy Auditor (CEA) and Certified Energy Manager (CEM). We are currently seeking Senior HVAC Engineer for our design and build team in our New York City office. Equal Employment Opportunity is a vital component of our company culture and our success. We offer a competitive salary, vacation, and personal days. Experience: You should have demonstrated experience in at least five of the following areas: · Load calculations and some Energy modeling experience · Design mechanical systems including: heating, cooling, heat rejection, air and water distribution, ventilation, air conditioning, building automation and controls. · Familiarity with codes, specifically NYCECC, CMR, IMC, ASHRAE standards 55, 62.1, 90.1 · Familiar with LL97, LL87, energy auditing and commissioning. · Prepare contract drawings detailing the designed systems using AutoCAD. · Select equipment for use in building systems. · Manage a small project, work area or technical skill set, monitor quality of work, and is involved in client liaison. Requirements: Ø Bachelor’s Degree in Mechanical Engineering with a sound knowledge of mechanical engineering fundamentals. Ø 4+ years of experience in commercial and residential HVAC design. Ø PE License preferred. Ø LEED AP preferred. Ø Experience in Revit preferred. Ø Proven interest in the field of building design and energy savings. Qualities: v Good communication skills essential for team-based working v Excellent planning and organization skills required for our fast-paced environment v Must be highly motivated, proactive and willing to take on new challenges Benefits:

Job Description Gas Turbine Fleet Engineering Manager - Astoria, NY (NYC) Company Information: Alpha Generation manages and operates power generation facilities that are well positioned to provide reliable, secure, safe, and sustainable power to meet increasing demand for electricity. Our diverse portfolio of assets is owned by ArcLight Capital Partners, a leading middle-market, value-added infrastructure investment firm that owns assets across the power, renewables, strategic gas, battery storage, and transformative infrastructure sectors. ArcLight has invested over $28 billion in equity capital across 125 transactions totaling approximately $80 billion in enterprise value. ArcLight has assembled a best-in-class leadership team at AlphaGen to manage over 14,000 megawatts of power infrastructure across four RTO markets (PJM, NYISO, ISONE, and CAISO). This highly experienced senior management team has a proven track record of strategic, operational, and commercial success and is focused on value creation while managing risk. AlphaGen will oversee one of the largest domestic, independent power portfolios, with nearly $2 billion in annual revenue. Culture, Ethics, & Accountability: AlphaGen embraces an entrepreneurial environment with a focus on accountability, agility, and integrity. Safety is our top priority. At AlphaGen, we are each responsible for ensuring a safe workplace. We act with integrity in every decision and every action. Our commitment is to always act in a manner that is ethical, compliant, and safe for our people, our communities and the environment. Our company proudly embraces a broad set of backgrounds and perspectives, and we lift each other up in the face of challenges. As a company, Alpha Generation pursues every opportunity for improvement, and we celebrate our successes together. We conduct our business in a manner that acknowledges varied perspectives, priorities and purposes. At AlphaGen, we respect our people, the communities where we live and work, our investors, and elected officials and regulators. Position Overview: Reporting to the Director of Engineering and Special Projects, the Gas Turbine Fleet Engineering Manager will manage fleet wide operations who will work as a member of a dynamic team, in a fast-paced environment, solving challenging engineering problems. The qualified professional will require a combination of strong engineering and communication skills that will facilitate project management and engineering, troubleshooting, testing and condition assessments of equipment, construction supervision and contract management. The position will include reporting to peers and senior management, directing plant management staff. Assignments cover the full range of implementing Long Term Service Agreements, outage management/support, and troubleshooting support as needed for the gas turbine fleet. The individual will report to the Engineering Director and will be required to work closely and collaboratively with colleagues in both the maintenance and production departments. The work will involve supporting any of the Company facilities located in the portfolio. Role and Responsibilities: • Support day-to-day, mid-term, and long-term operational activities, planned major maintenance outages, forced outages, new projects and programs as required for gas turbine-generator operations as subject matter expert, • Promote safety by ensuring overall safe equipment condition and operation through enforcement of industry and company standards, policies and procedures, • Assist in negotiation and administration/management of all long term service agreement programs within the portfolio, • Some commercial background in this area is preferred including experience negotiating and managing contracts and contract structures, • Make technical decisions within area of competence with regard to decisions to accept as fit for purpose equipment, materials or components that are not in accordance with the original intent by virtue of wear and tear, defects, faults in manufacture or installation/erection and where such decisions are made, to identify specific operating or maintenance restrictions or remediation that should be put in place in order to maintain an adequate level of risk, • Work closely with plant personnel at various sites to investigate and conduct root cause analysis of gas turbine-generators and associated auxiliary systems and to identify options for the mitigation or elimination of these deficiencies, • Coach and/or lead repairs and inspections during routine, forced and/or scheduled outages, • Project execution including meeting company objectives for safety, quality, budget, and schedule., • Maintaining relationships with contractors and vendors and staying abreast of the market and technological industry advancements, • Support construction and equipment testing and commissioning, • B.S. in Mechanical Engineering from an accredited university with 5+ years of experience in power industry, M.S. degree beneficial, • Familiarity with the typical failure modes of the normal power plant prime movers, generators, materials, systems and plant component items, • A thorough understanding of plant design, construction, operations, maintenance, testing or analysis in the utility industry, oil & gas industry or marine propulsion is required, with specific expertise in various OEM gas turbines and generators, • In-depth understanding of gas turbine disassembly/assembly, alignments, balancing, etc. as part of major maintenance activities, • Working knowledge of gas turbine major components and repair requirements for various OEMs preferred, • Knowledge of relevant codes and standards such as ASME, ASTM, ANSI, IEEE, ASCE, and OSHA standards and requirements is beneficial, • Previous field experience as TFA, FE, startup and commissioning tech, etc. of at least 7+ years desired. Experience in geographically diverse regions of North America is desirable, • Previous experience in manager position of at least 2+ years, • Excellent interpersonal skills with the ability to build relationships with internal and external stakeholders, • Self-motivated and able to function effectively with minimal supervision, • Ability to multi-task and effectively manage multiple assignments occasionally under time constraints, • Exceptional project and process management skills, • Team player who can work effectively in team environment, • Strong written and oral communication skills, • Strong organizational skills, • High level of computer and internet competency, • Proficiency with using Windows-based software programs, • Travel is associated with the role, up to 30%

Job DescriptionMid-Level Manufacturing Engineer (Windows & Doors) Location: Queens, NY (on-site) Department: Engineering / Operations Reports To: VP Operations Type: Full-time Role Summary We’re looking for a hands-on Manufacturing Engineer (3+ years) to drive throughput, quality, and cost reduction across our window manufacturing lines (vinyl/aluminum). You’ll own process improvement, tooling/fixtures, new equipment integration, and production support—partnering closely with Production, Quality, Maintenance, and Sales to keep jobs moving and customers happy. Key Responsibilities • Process Optimization: Map current state, remove bottlenecks, and improve takt/OEE, scrap, and first-pass yield using lean/5S/Kaizen., • Equipment & Tooling: Specify and commission machinery (e.g., double-miter saws, 4-head welders, corner cleaners, hardware stations, IGU line); design jigs/fixtures; create preventive maintenance plans with Maintenance. Assist the mechanic with troubleshooting equipment and minimizing downtime., • Standard Work & Documentation: Build/maintain SOPs, WI’s, control plans, PFMEA; train operators and line leads., • Quality Engineering: Analyze defects/returns; implement corrective actions aligned to AAMA/NFRC and relevant ASTM performance standards (air/water/structural/thermal)., • New Product Introduction: Industrialize new profiles/assemblies—BOM/routing setup, pilot runs, capability studies, and ramp-to-rate., • Data & Cost: Track line metrics (OEE, downtime, changeover, scrap); partner with Supply Chain on yield, alternative materials, and vendor qualifications., • Safety & Compliance: Engineer guards/ergonomics; support OSHA and electrical/mechanical safety on the floor.Qualifications, • 3–5+ years in manufacturing/industrial engineering (windows/fenestration, building products, or discrete fabrication strongly preferred)., • BS in Mechanical, Industrial, or Manufacturing Engineering (or equivalent experience)., • Ability to read and write in Chinese, • Proficiency with CAD (SolidWorks/AutoCAD) and MS Office., • Demonstrated lean toolkit (5S, SMED, value-stream mapping, root cause/8D)., • Comfortable on the floor—diagnosing issues at machines, with operators, and vendors.Nice to Have, • Experience with IGU processes (spacer/butyl/hot-melt, gas fill), vinyl welding parameters, aluminum fabrication, and hardware installation cells., • Basic statistics/DOE; gauge R familiarity with AAMA/NFRC audits., • Exposure to PLC/HMI basics and machine safety.What Success Looks Like (First 90–180 Days), • Launch 5S + Standard Work in one of the three production lines (vinyl production); OEE +10% and scrap −15%., • Improve QC satisfactory results by 30%., • Implement PM checklists on priority machines; unplanned downtime −20%.Compensation & Benefits, • Monday–Friday, primarily day shift; occasional off-shift support for trials/startups., • Office adjacent to production; frequent time on the floor with PPE.Equal Opportunity Employer. We value diversity and provide equal employment opportunities to all employees and applicants.

Job DescriptionJob Description Hours: Full-Time – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Civil Engineer title, those who are reachable on DDC Promotional List (Exam #4522), or reachable on the Open-Competitive List (Exam #0156 or #4030) may apply. Please include a copy of your Notice of Results card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The NYC Department of Design and Construction's Division of Infrastructure is seeking an Engineer-in-Charge to join the Coastal Resiliency’s Construction team. This role, reporting to a Deputy Director, entails managing the construction of complex projects, leading constructability review meetings to reduce delays, and ensuring the precise collection of project data. The Engineer-in-Charge will also coordinate with Resident Engineers, Office Engineers, and Inspectors under respective project REI or PMCM consultants, while liaising with the Utility company, Design and Program Management Units throughout different stages of construction. Additional responsibilities include inspecting contracted work to ensure it meets Agency and City standards, preparing cost proposals for contract negotiations, suggesting modifications to engineering designs, and engaging in design and constructability review meetings. The role requires managing and approving various project-specific submissions, such as sheeting design constructability, vendor approvals, and environmental plans, as well as overseeing financial aspects like payments, change orders, and time extensions. Lastly, the Engineer-in-Charge will oversee final inspections, mentor new staff, manage project close-out procedures, and ensure the approval of final documentation. Moreover, the candidate will provide regular updates on project progress and address any critical delays in meetings. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. CIVIL ENGINEER - 20215 Qualifications (1) Four (4) years of full-time, satisfactory experience in civil engineering work; and (2) A valid New York State Professional Engineer’s License. Current New York State registration as a Professional Engineer must be maintained for the duration of your employment. A masters degree in civil engineering from an accredited college or university, accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education and by the Council for Higher Education Accreditation (CHEA) may be substituted for one year of the civil engineering experience required in “1" above. Special Note: In addition to above qualification requirements, to be eligible for placement in Assignment Levels II and III, individuals must have at least one year within the last three years of experience as a major contributor or a project leader on a complex project requiring additional and specific expertise in the disciplines needed to design or construct the project. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionSalary: 80K+ Title: Project Engineer Job Summary Infinity Contracting Services Corp is actively seeking a highly motivated Project Engineer with prior construction experience to join our team to a project located in the five boroughs of New York City. We recognize our employees are the companys most valuable asset. Inspiration, diligence, and encouragement towards each other coupled with purposeful work lead to a rewarding career, and we are proud to provide a platform with which our employees can attain their goals. The Project Engineer position will assist and support project manager, superintendent, and/or foreman on assigned project(s). The position will work under direct supervision, perform routine daily activities and gather, distribute information and deliverables, and manage project management software. Responsibilities and Duties Setup, manage and maintain project management software for each job Organize, maintain and process contract documents and shop drawing in order to meet project budget, schedule, and requirements Identify, issue and manage RFIs Formulate start-up, testing and commissioning procedures Serve as a point of contract regarding technical information associated with the project Verify existing field conditions and report changes to affected parties Lead internal MEP coordination process Facilitate required inspections, testing, and commissioning Review contract documents for completeness and consistency Identify project scope deviations from contract documents and field observations Monitor construction progress for quality compliance Resolve and manage client issued non-compliance reports Assist the project manager with buy-outs Release equipment and materials per approved submittals Manage and coordinate lead times and delivery dates for equipment and material Generate submittal, RFI, equipment, etc. logs for project stakeholders Qualifications and Skills • Bachelors Degree in Engineering: Mechanical, Civil, Environmental, or related engineering disciplines (or equivalent experience)- NOT REQUIRED, • 3+ years of experience on projects, • Ability to work in a multi-task environment, • Strong oral and written communication, • Excellent time management skills, • Working knowledge of Microsoft Office Suite Benefits: • 401 (k) *401 (k) matching *Dental Insurance *Health Insurance *Vision Insurance *Life Insurance *Opportunities for advancement

Job Description Join us as the Director of Engineering at the highly anticipated Rhyland Hotel, set to open this summer in vibrant Flushing, NY. This is a unique opportunity to lead our engineering and maintenance team from pre-opening through the exciting journey of establishing operational excellence. You'll play a critical role in ensuring our state-of-the-art facilities run seamlessly, creating a safe, welcoming, and exceptional environment for our guests and associates alike. If you're an experienced hospitality engineering leader who thrives on building systems, developing teams, and delivering outstanding guest experiences, we want you at the heart of our Rhyland Hotel team! Why Join The Rhyland Hotel? Prime Location: Situated in Flushing, a bustling hub of culture, dining, and commerce, with easy access to Manhattan and the surrounding boroughs. Exciting Opportunity: Be part of the launch of a brand-new hotel, offering a fresh and modern experience to guests. Growth Potential: Play a key role in our sales operations, with opportunities for career development in the hospitality industry. Essential Functions: • Independently manages maintenance personnel to include but not limited to the responsibility of hiring, training, administering performance reviews, determining wages, coaching and discipline, termination, and weekly scheduling., • Responsible for the proper operation and functionality of all electrical, mechanical, plumbing, HVAC, laundry, kitchen, refrigeration, lighting systems, and all specialized equipment and systems., • Performs and delegates property and grounds upkeep tasks, including painting, tile work, trim work, detailing, light adjustments, installations, cable/internet assistance, furniture repair, grout work, recycling and waste management, grounds keeping, etc., • Responsible for the pool maintenance, cleanliness, proper water chemistry and compliance with local department of health., • Ensure compliance with city, state and /or federal code., • Review work orders and complete work by room/guest priorities., • Ensure guestrooms, restaurant, and public areas are maintained to company standard., • Maintain continuous communication with Front Office during all shifts to ensure all complaints are addressed., • Primary liaison with 3rd party trades performing work as required., • Assume full responsibility for the condition of the property in the heart of the house (the infrastructure) as well as all the public areas., • Play a lead role in Energy conservation., • Cost effective management of equipment purchases or leasing, service contracts, repair and maintenance agreements, or sourcing local 3rd party tradesmen., • Management and achievement of budgeted capital and repair and maintenance operating costs., • Develop & maintain preventive maintenance programs for all guestrooms and equipment., • Responsible for continuous update of safety manual and all training for entire company including OSHA regulations, DOT testing, and Right to Know Law, and NFPA training., • Chair of Safety Committee., • Maintain an accurate inventory of supplies., • Ensure the Engineering shop and office are clean and organized., • Maintain department checkbook and code invoices for payment accordingly., • Oversee all engineers and maintenance personnel, including participating in the recruitment, onboarding, orientation, training, assessing/completing reviews, disciplining, and terminating of employees., • Address loss prevention management and security., • Have a thorough understanding of fire alarm procedures, emergency evacuation procedures and all safety related issues. Key liaison with town Fire Department authorities to work with GM to plan and perform regular quarterly evacuation drills., • Maintain all required permits and licenses for facility., • Dependent upon the weather, maintain safe walking areas for all guests and associates (activity required may include shoveling snow, raking leaves, addressing debris. Must play the primary role in Snow Removal in winter (including supervising outside contractor duties)., • Leadership role in curb appeal, landscaping, and grounds maintenance., • Ability to adhere to all HR Personnel standards and maintain a professional work environment with all Inn associates., • On call for any emergencies 24/7, • Address each and every guest using the S.E.A.C. method, with a smile, eye contact, acknowledge their presence in a timely manner with appropriate greeting, and kindly close., • Attend all scheduled meetings and training sessions., • Understand and practice all HCH safety and security procedures, including Emergency Evacuation Procedures, Accident Reporting, Right to Know Law, Written Information Security Program, Bloodborne Pathogen Procedures, Anti-Harassment Policy, and Violence in the Workplace Policy., • Comply with all Hotel and HCH time and attendance policies., • Comply with all Hotel and HCH uniform, dress code, and appearance standards. Hotel Specific Essential Functions: • Ability to remain standing for 10 hours., • Ability to remain in a stationary position for 10 hours., • Ability to frequently move and lift up to 80 lbs., • Ability to walk the property and grounds frequently, multiple times per shift., • Ability to move up and down stairs frequently., • Ability to bend frequently and repetitively during a shift., • Ability to use repetitive manual dexterity., • Able to kneel, crawl, crouch, and stretch into hard-to-reach places., • Ability to move quickly based on guest needs., • Ability to frequently communicate and exchange accurate information effectively., • Ability to read, write, understand and speak English., • Ability to operate a motor vehicle with valid operator's license. Technology and Equipment: • Microsoft Office, including Outlook, Word, and Excel programs., • Property Management System, • CB Radio, • Power Tools and handheld tools, • Blueprints, schematics, and other technical materials, • Computer and Printer, • Electronic/Mechanical gauges (thermometers, pressure gauges, etc.), • All room equipment, including vacuum cleaner, wallpaper steamer, carpet shampooer, etc., • All F&B equipment, including deep fryer, broiler, stove, steamer, food processor, slicer, flat top grill, mixer, oven, steam table, etc., • Sanding equipment, • Ladders, scaffolding, and support systems, machine operated lifts, • Snow removal tools and chemicals, • Time Keeping System

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Job description: Junior Construction Estimator/Cost Control Engineer Our Client is looking to hire at least two exceptional candidates in Estimating and Cost Controls. Candidates must be driven and extraordinarily detail oriented while still possessing the people skills required to effectively communicate with project management, subcontractors, and suppliers. A skill many estimators and engineers do not possess. If you believe you have those skills and attributes, I encourage you to apply. We are not looking for number takers and candidates should have knowledge of current unit values. There is an opportunity to grow into senior leadership once you have built the confidence of the principals. We are not a large company so the cream can come to the top very quickly. We would also consider adding an additional Junior Estimator to help with all take-offs if they are driven to further their career quickly. Construction is not brain surgery you just have to be a student of the game. The Cost Control position maintains our detailed job costing versus original budgeted costs in addition to confirming and writing scopes of work for the contracts. They will also work with our accounting department in monthly billings which requires an individual to look historically and prospectively. Critical to this is identifying when budget issues arise to the project management team and principals. This group is the backbone of the production team. All candidates shall be responsible for the estimating and taking off all trades including architectural, structural and mechanicals. Our Client is often retained as a construction manager during the concept/schematic phase of projects by its clients and therefore involved with extensive concept budgeting. Candidates shall also be responsible for solicitation and qualification of Subcontractors and working with the design team on value engineering alternatives. Requirements: As our Client's work involves both new construction and renovation projects, we are looking for candidates experienced in the planning, construction, and scheduling of new mid-rise residential buildings (rentals and condominiums), new commercial buildings (primarily high-end retail), renovation/conversion of commercial buildings (old industrial or mill building into office, retail, and residential) and tenant improvements (office and retail spaces). Other requirements include: 4 Year degree or equivalent in engineering or architecture Minimum of 1 year of Estimating work, like our client's Knowledge of industry standard construction means and methods is a must Thorough knowledge of unit pricing Ability to take off all trades Our client is a general contractor and construction manager catering to private owners and developers of commercial and luxury residential properties. Our success is attributable in large measure to our unique approach to development as if we were the owner and developer of the projects. Job Type: Full-time Benefits: Dental insurance Health insurance Paid time off Vision insurance Education: Bachelor's (Preferred) Experience: Construction estimating: 1 year (Preferred) Work Location: In person Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job DescriptionSalary: Job Title: Quality Control Engineer Location: New York Employment Type: Full-Time Why Should You Join AEIS? At AEIS, were proud to serve as the quality backbone on some of New York Citys most vital infrastructure projects. We dont just test materials we ensure public safety, durability, and long-term performance. As an Asphalt Inspector, youll be on the front lines of field testing and observation, supporting paving operations that shape NYCs transportation network. Youll be trained, equipped, and supported to grow in a technical and mission-driven career. Job Summary: We are seeking a proactive and detail-oriented Quality Control Engineer to join our team. This is an on-site role that involves coordinating with subcontractors, reviewing drawing sheets, identifying deficiencies, and ensuring that the project is completed by closing all deficiencies. Experience working with the Port Authority and at airports is must to execute the required project. Key Responsibilities: • Coordinate day-to-day quality control activities with subcontractors on the field., • Interpret and review project drawings and technical specifications to ensure adherence to quality standards., • Identify, document, and report any deficiencies or deviations from standards., • Conduct inspections and audits to verify compliance with client and regulatory requirements., • Maintain detailed and accurate records of quality checks, reports, and corrective actions., • Collaborate with project managers and engineers to resolve quality issues promptly., • Support continuous improvement initiatives and ensure quality protocols are followed. Required Qualifications & Skills: • Bachelors degree or diploma in Engineering, Construction Management, or a related field., • Minimum 23 years of hands-on experience in a quality control role, preferably within construction or infrastructure projects., • Familiarity with Port Authority project requirements is a must., • Strong understanding of construction drawings and site procedures., • Excellent communication and coordination skills., • Ability to work independently in a fast-paced, field-based environment. Preferred Qualifications: • Work alongside engineers, lab staff, and senior inspectors, closely controlling the deficiencies and using your skills to expedite project completion, • Access internal training pathways to broaden your certifications and credentials, • Competitive compensation, • Full-time opportunity with technical and career growth paths, • 401(k), • Health, Dental, Vision Insurance, • Paid Time Off (PTO), • Professional Development Support, • Employee Referral Program, • Internal mentorship and cross-training opportunities

HVAC Controls Engineer – (Engineering Consulting). HVAC Controls Engineer/Project Manager - NYC. We are seeking an HVAC Controls Engineer/Project Manager.

Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods. Develop sustainable manuf

Bachelors Degree in mechatronics, automation engineering, or electrical engineering from an accredited university. Familiar with engineering software, such as SolidWorks, AutoCAD, etc.

Communicate detection capabilities and findings to technical and non-technical stakeholders, including executive leadership. Professional Technology Skills (the professional technology skills you need to be able to do the job). Technical proficiency performing security investigations at scale; inclu

Here, they learn theory and practical application of nuclear physics and reactor engineering.

Tiger Analytics is a fast-growing advanced analytics consulting firm. Tiger Analytics Job Opportunity. We are the trusted analytics partner for several Fortune 100 companies, enabling them to generate business value from data.

Emergency Communications Engineer.Fully Onsite Role for Brooklyn, NY Work Location: Only Local to NJ-NY (Commutable Distance from Brooklyn, NY) On Site LinkedIn Is a Must: Candidate must have LinkedIn account Scope of Services Oversight of vendors supporting emergency communications, telecommunicati

The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipmen

The Chief Engineer II maintains the physical structure and equipment of the building in optimal working condition, performing preventive maintenance and emergency, corrective, and routine repairs on electrical, mechanical, fire and life safety, plumbing, and HVAC systems. This role ensures effective

Professional engineers, registered landscape architects and other professionals that have knowledge in design and implementation of designs for the prevention of pollution related to stormwater runoff prepare and submit stormwater pollution prevention plans. Reviews maps, plans, drawings, and specif

ETABS, RESA, Blue Beam, Revit, Tekla, RAM Structural System) to develop and validate structural models. Collaborate with architects, MEP engineers, contractors, and other stakeholders to coordinate structural solutions within overall building design. Perform site inspections, structural assessments,

Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related field.

Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Electrical Engineering, Electrical Engineering Technology, Electrical Power Enginee

Reporting to the Maintenance Supervisor, the Engineer is a part of the department maintaining the common areas and apartments of our residential buildings.

We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide. We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in E

Title: Electrical Engineer Series. Electrical Engineer 1: $90,551. Electrical Engineer 2: $107,655.

Licensed Structural Engineer or Professional Engineer. Experience in structural systems, design of industrial steel buildings, masonry structures, pipe racks/pipe bridges, shallow/deep foundations, and construction practices. Develop calculations for safe, economical, and prudent solution of structu

Bachelor's degree in Mechanical or Electrical Engineering (or equivalent experience).

This position will schedule, coordinate and ensure the required testing, inspection, repair and upgrades/ replacements of fire protection systems with the third-party contractor(s), LIRR Force Account, Corporate Safety, LIRR Fire Marshal or Fire Department; as per LIRR policies, contract terms, and

Experience in technical writing, supplier quality, failure analysis, automotive parts or service is a plus. In this role, you will provide product quality and engineering support for customer related concerns and issues relating to products supplied by Standard Motor Products. Investigate and issue

Bachelor's Degree - Construction or Engineering preferred or equivalent experience. More than 135 years in the making, we're one of the world's largest construction and project development companies.

Seeking Senior Sitecore Engineers who will perform a full range of web design, web development and full stack configuration and support.Additionally, the engineer will participate in the Sitecore CMS design decisions, as well as:.Build reusable code and libraries for future use.Ensure the technical

Troubleshoots and develops technical solutions related to software and setup errors for field engineers, technicians, and customers.