Trabajos entry software engineer en Orlando, FloridaCrear alertas

GAI is seeking a Technical Specialist 1 to join our Transmission and Distribution Power Delivery team. Required skills include critical thinking, problem-solving, organization, team focus, and eagerness to apply learned engineering principles to solve real-life problems. We value work-life balance and offer flexibility - this position can be performed in a hybrid or fully remote capacity. #Remote, # Hybrid, #Transmission Line, #INDHP Position Specific Responsibilities: • Complete day-to-day project tasks as required for successful project delivery. Tasks may include:, • Preparation of Specification Packages, • Preparation of Structural and Fabrication Drawings, • Design and Analysis of Transmission and Distribution Lines using PLS-CADD, PLS-POLE, PLS-Tower, or other power delivery analysis software, • Design and Analysis of foundations., • Analysis of existing and proposed structures with regard to Client and Other required codes, standards, and specifications., • Performance of Electrical Clearance checks and calculations., • Coordination and development of permits for Railroads, Roadways, and Environmental Crossings., • Apply engineering principles to assist in the design of Power Delivery Projects., • Must demonstrate attention to detail., • Demonstrate excellent written and verbal communication skills., • Possesses foundational engineering concepts through undergraduate-level education., • Acquires basic knowledge and develops basic skills through mentored experience., • Applies learned knowledge and skills to perform assigned tasks., • Performs routine technical work which does not require previous experience., • Collects data and gathers information or documents., • Participates in laboratory testing and field investigations., • Performs basic computations or analysis., • Assists with preparation of engineering deliverables., • Responsible for personal task management and adherence to deadlines and scope., • Receives close supervision on all aspects of assignments., • Possesses basic oral and written communication skills. Identifies and acknowledges principles of teamwork and leadership. At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: • Competitive salary -GAI is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match, • Tuition Reimbursement #INDHP EducationBachelors of Engineering (required) Experience0 - 1 years: Related Experience (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact This Engineering Associate is an entry-level technical role who is on the professional Engineer license track that will apply basic to intermediate engineering principles to complete design computations, prepare written technical reports, design plans, and details. The Engineering Associate may be called upon to make minor project decisions. Key Responsibilities • Prepares and reviews design computations, plan designs, and drawings., • Reviews submittals and coordinates project submissions., • Prepares and reviews specifications, draft letters, and written technical reports., • Completes inspections and field work assignments as needed., • Researches, reviews, interprets, and understands written regulations, code compliance, and permit requirements and applies them to design projects., • Maintains appropriate documentation of work and project records., • Possesses knowledge of Codes and Standards applicable to project designs., • Develops technically accurate, clean, and deliverable drawings., • Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors and omissions., • Education: Bachelor’s or Master’s Degree in position relevant Engineering field from ABET accredited school, Landscape Architecture, or related field of study., • Experience: Zero (0) to three (3) years’ job-related experience. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR HQqnsX5iJ8

Job Description Required Skills & Experience • Associate's in Biomedical Engineering + 4 years of experience in the field OR 6 years of experience in the field (specifically biomed tech in medical devices), • Independent Problem Solver, • Strong Customer Service Skills, • 80% hardware troubleshooting, 20% software troubleshooting Job Description Day-to-Day: Insight Global is supporting an Orlando Clinical Engineering team in hiring an entry‐level Clinical Engineer Technician. This person will: • Perform routine safety checks, scheduled maintenance (SM/PM), calibrations, and repairs on diagnostic and therapeutic medical equipment, • Utilize service manuals, documentation, and technical resources to troubleshoot and complete repairs or upgrades., • Support the integration of medical devices with hospital IT systems and networks., • Enter documentation for all completed work to meet FDA, Joint Commission, and hospital regulatory requirements., • Communicate repair status with Supervisors and clinical departments.

Job Description LandSouth Construction is a leading multifamily general contractor with projects throughout the Southeast and a strong presence in Florida. Since our founding in 1998, we have delivered over 30,000 units, representing a market value of more than $3.5 billion. We are proud to be consistently recognized for excellence as a contractor, employer, and growing business. We have an exciting opportunity for a Project Engineer to join our team. This is an entry-level role with a clear path to grow into an Assistant Superintendent position. You will be on an active job site each day, working alongside field teams, coordinating with trade partners, and watching the project take shape in real time. This is a true boots on the ground role where you are part of the daily progress, not observing from a distance. If you are looking to build a long-term career in the multifamily industry and gain hands-on experience from day one, this is a strong place to start. SUMMARY As the Project Engineer, you will support the project team by assisting with onsite operations, emphasizing job site safety, accurate and timely documentation, and progress monitoring. You will help maintain jobsite organization, coordinate subcontractor activities, and track materials. Further, you will contribute to meeting schedule and compliance goals through inspection coordination, detailed recordkeeping, and verification of adherence to quality standards. RESPONSIBILITIES • Assist the Project Superintendent and Assistant Superintendents with daily jobsite activities to support project progress and maintain quality workmanship, • Walk units to monitor progress, safety, efficiency, compliance with plans, and material quality, • Assist with supervising subcontractors and vendors and deliver frequent updates to the project team on field activities, progress, and any delays, • Coordinate material deliveries as requested and help organize the jobsite to promote maximum productivity, • Coordinate and support material deliveries, ensuring proper unloading, on-site storage, and usage, • Serve as a safety advocate by promoting and enforcing established safety policies and procedures, • Maintain jobsite documentation including the Field Tracking Log, photos of construction progress, inventory, rental equipment, appliances, labor timesheets, and notices, • Assist the Project Superintendent in managing and tracking general condition costs and resources, including dumpsters, equipment rentals, power usage, and labor, to maximize job site profitability, • Maintain current and accurate project records including drawings, permits, inspection reports, and meeting notes, • Ensure project information is readily available by promptly scanning and uploading documents into designated project folders in Procore, • Review construction drawings and submittals to build technical knowledge and improve field leadership readiness, • Schedule and coordinate site and building inspections with the appropriate authorities, • Ensure inspection documentation is prepared in advance and deadlines are communicated, • Bachelor of Science in Construction Management or a related field, with a desire to grow and develop within the multifamily construction industry, • Skilled in using computers, smartphones, and iPads, inputting data, and verifying the accuracy of information, • Basic understanding of construction processes and terminology, • Willingness and ability to learn construction project management software and tools, • OSHA 30 certification or the ability to obtain within a designated time frame, • Must have a valid Driver's License, • Must be authorized to work in the United States, • Weekly pay schedule, • Monthly auto and cell phone allowance, • Quarterly bonuses AND project-specific bonuses, • Three weeks of front-loaded paid time off, • Health, dental, and vision insurance plans, • 401(k) retirement plan with company contribution, • Employee assistance programs for physical, financial, and mental well-being, • Project pipeline exclusive to the Southeast, with the majority of work throughout Florida We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description H&H is offering an exciting opportunity for a Senior Traffic Engineer/ Traffic Modeler with five+ years of professional experience to be part of our transportation team. This position will provide traffic engineering capabilities in support of our Southern District operations, with potential for additional responsibilities in our growing southern regions including North Carolina, Louisiana, and Texas. The successful candidate will provide traffic signal design, traffic analysis, signing and pavement marking design, and assist with design efforts for the Transportation group. A strong background in Florida DOT and County design policies and procedures is preferred. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Provide Traffic Signal, Signing and Striping Design and EOR duties on Signalization and S&PM Plan Sets, • Perform intersection and roadway capacity analyses using HCS, Synchro, and SimTraffic software and prepares traffic impact studies, • Oversee the creation of engineering documents, design reports, and variation/exception reports, • Provide support to local and regional offices within the company, • Coordinate plans, calculations, and specifications amongst multi-discipline engineering teams, • Perform internal quality control procedures, • Bachelor’s in Civil Engineering from an accredited four-year college, • Florida Professional Engineering License or ability to obtain, • PTOE certification a plus, • Minimum five years of experience, • Knowledge of FDOT plan preparation criteria and design standards, • Knowledge of other transportation disciplines and their relationship to traffic design, • Strong verbal communication and technical writing skills We offer a professional work environment, a competitive salary, benefits package and 401(k). EOE M/F/ DISABILITY/VETS

Job Description Job Summary: AVT Simulation is seeking a highly organized and detail-oriented Office Administrator to join our team full-time at our Oviedo office. This in-person role is essential in ensuring smooth daily operations and supporting a productive work environment. This is a full-time, on-site position based in Oviedo, FL Responsibilities/Duties/Functions/Tasks * Receive, log, and distribute incoming packages and deliveries * Organize and stock office supplies to ensure all departments are adequately equipped * Scan, file, and maintain digital and physical documents accurately and efficiently * Perform light data entry and administrative tasks as needed * Support general office operations and assist team members with administrative needs Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications: Minimum Requirements * High School Diploma or GED * Minimum 2 years of experience working in an office environment * Valid Florida driver’s license * Proficiency in Microsoft Excel, Outlook, and SharePoint. * Strong organizational and time management skills * Attention to detail and the ability to work independently * Excellent communication and interpersonal skills Preferred Qualifications: * Experience in a manufacturing facility * Experience in ERP software, i.e. SAP, Deltek CostPoint Essential Mental Requirements * Excellent written and spoken communication skills for documentation, intra-team, and interdisciplinary communication. * Exceptional attention to detail and accuracy. * Strong verbal and written communication skills. * Excellent analytical and problem-solving skills with the ability to interpret complex financial data. * Strong organizational and time-management skills. * Capability to interpret data. Essential Physical Requirements * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. * The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. * This is a largely sedentary role; however, some filing is required, which would require the ability to lift files, open filing cabinets and bend or stand on a stool as necessary. Equipment/Software/Tools Used * Computer, phone, printer/scanner * Deltek-Costpoint accounting software * PDF editor (Adobe, PDF Sam) * Microsoft Office Application (Excel, Project, Word, PowerPoint, Teams,) Our Heritage: Founded in 1998 by an engineer, AVT Simulation is an Orlando-based, end-to-end systems integration and full-service modeling and simulation small business. Since our beginning, AVT's highly specialized staff of engineers has included some of the top leaders in the simulation industry. With an average of over 20 years of simulation experience, our dedicated staff provides specialized solutions for customers requiring on point solutions to complex problems. AVT has always been a company that strives to make a positive difference in the lives we touch. These lives include our employees and their families, our partner companies and their employees, and ultimately the warfighters receiving our products and services. Our core values are so very important to us as a company. They guide us towards success. They make us a great company to work for and a strong partner to work with. • People First, • Mission Excellence, • Do the Right Thing, • Commitment People First is our first and most important core value because we firmly believe the success of AVT is directly related to supporting our employees. We have a lot of fun (with regular employee events and engagements), while still working hard to accomplish our mission of serving our military and the warfighter. We’re looking for candidates that embody these core values, know how to have fun while working hard, and think they would thrive in an environment like ours. If you’re a self-motivated individual, then come join AVT. Come make your difference. EOE - Females/Minorities/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity Qualified individuals with a disability have the right to request a reasonable accommodation. If you are unable or limited in your ability to use or access our careers website as a result of your disability, request a reasonable accommodation by visiting and follow the instructions at the bottom. Powered by JazzHR OR450POJWa

Job Description Ardurra is seeking an Entry Level Stormwater Engineer to join our team in our Maitland, FL office! As a trusted leader in providing reliable and innovative stormwater solutions across the Southeast, we offer tailored and cost-effective approaches to protect public safety, improve watershed functions, and enhance quality of life. As advisors to municipal clients, we guide communities in developing sustainable stormwater programs. Our expertise includes watershed planning, asset management, NPDES permitting, water quality and quantity control, and capital design projects. Primary Function: Under general mentorship and guidance, performs assignments that require the application of standard techniques, procedures, and criteria in carrying out a sequence of related design engineering tasks. This role involves enhancing water quality and controlling pollution by developing stormwater treatment systems, implementing best management practices (BMPs), and upgrading infrastructure, such as rehabilitating stormwater pipes, to modernize aging systems.. Primary Duties: • Assist in the design and analysis of stormwater management systems, including drainage, retention, and green infrastructure projects., • Perform hydrologic and hydraulic modeling using software such as SWMM, HEC-RAS, AutoCAD Civil 3D, and GIS tools., • Support the preparation of stormwater reports, calculations, and permitting documents., • Conduct site evaluations and assist in environmental impact assessments., • Collaborate with senior engineers and multidisciplinary teams to develop innovative solutions., • Assist in field inspections, data collection, and site assessments., • Bachelors in Civil, Environmental Engineering, or related disciplines, • 0-3 years of experience in stormwater engineering or related fields (internship experience preferred but not required), • Exposure to stormwater modeling software (HEC-RAS, SWMM, HydroCAD), AutoCAD Civil 3D, and GIS applications is a plus., • EIT certification (or ability to obtain within one year) preferred Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description 6 month contract to hire Required Skills & Experience • Associate's in Biomedical Engineering + 4 years of experience in the field OR 6 years of experience in the field (specifically biomed tech in medical devices), • Independent Problem Solver, • Strong Customer Service Skills, • 80% hardware troubleshooting, 20% software troubleshooting Day-to-Day: Insight Global is supporting Orlando Health's Clinical Engineering team in hiring an entry‐level Clinical Engineer Technician. This person will: • Perform routine safety checks, scheduled maintenance (SM/PM), calibrations, and repairs on diagnostic and therapeutic medical equipment, • Utilize service manuals, documentation, and technical resources to troubleshoot and complete repairs or upgrades., • Support the integration of medical devices with hospital IT systems and networks., • Enter documentation for all completed work to meet FDA, Joint Commission, and hospital regulatory requirements., • Communicate repair status with Supervisors and clinical departments., • Assist with incoming equipment inspections and support occasional after‐hours or on‐call needs. Maintain a clean, safe workshop area and uphold Orlando Health policies and HIPAA standards.

Job Description Are we the road to your future? We are currently searching for an entry level Drainage Engineer in Training (E.I.) to support our Southeast Region located in any of our Florida Volkert office locations. To be considered for this position, applicants must have, at minimum, a Bachelor’s of Science in Civil Engineering. What you’ll be doing: • Assists with various assignments for the Department of Transportation and local municipalities, • Performs engineering deliverables associated with Drainage and roadway infrastructure improvements, • Assists and prepares project plans using the latest CADD software including but not limited to MicroStation, OpenRoads, Civil3D, and/or AutoCADD, among others, • Contributes to the preparation and/or modification of engineering reports and calculations for a wide variety of projects, • Works with senior staff to develop plans and calculations for transportation and drainage related projects, • Performs the design of stormwater management facilities to meet water quality and quantity requirements, • Prepares and assists in the preparation of project construction quantities, details, cost estimates and the preparation of project specifications, • Reviews project quantity estimates, details, and check calculations and drawings for compliance to project requirements, • Prepare and assist in the preparation of project schedules, • Collaborating across multiple disciplines, piers, and other professionals to successfully deliver quality projects within budget and schedule, • Performs other duties as assigned What you need to have: • Bachelor’s of Science in Civil Engineering, • EIT (E.I) Certification is desired (or the commitment to acquire it within 1-year), • A minimum of 0 - 4 years of engineering experience, • Experience with (or strong willingness to learn) MicroStation, Geopak, Civil3D, StormCAD, ORD, ICPR, HEC-RAS, GIS and/or SUDA software (among other software), • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines., • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Previous FDOT/Municipal experience is a plus, • Prior knowledge of FDOT standards is plus Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a motivated Entry Level Electrical Engineer to join our dynamic team. This is an exciting opportunity to launch your career with an industry leading architecture, engineering, and construction firm known for innovative solutions and a collaborative work environment. We believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. If you want your time, energy, talent, enthusiasm, and personal passion to result in meaningful impacts and improvements in our communities, you belong on the C&S team! Position Responsibilities • Works in the responsible charge of a licensed electrical engineer, • Assist in the design, analysis, and implementation of medium voltage, low voltage, telecommunication, and fire alarm systems for a variety of projects, including hospitality, theme parks, aviation, commercial, industrial, higher education, and healthcare., • Prepare drawings, specifications, and technical reports under the guidance of senior engineers., • Support project teams with calculations, cost estimates, and field investigations., • Collaborate with multidisciplinary teams to deliver high-quality, client-focused solutions., • Participate in site visits, inspections, and construction administration activities., • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Bachelor’s degree in Electrical Engineering from an accredited institution, • 0-4 years of relevant experience (internships or co-ops a plus), • Strong technical, analytical, and problem-solving skills, • Proficiency with AutoCAD, Revit, or similar design software preferred, • Excellent communication and teamwork abilities $78,000 - $95,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact This Engineering Associate is an entry-level technical role who is on the professional Engineer license track that will apply basic to intermediate engineering principles to complete design computations, prepare written technical reports, design plans, and details. The Engineering Associate may be called upon to make minor project decisions. Key Responsibilities • Prepares and reviews design computations, plan designs, and drawings., • Reviews submittals and coordinates project submissions., • Prepares and reviews specifications, draft letters, and written technical reports., • Completes inspections and field work assignments as needed., • Researches, reviews, interprets, and understands written regulations, code compliance, and permit requirements and applies them to design projects., • Maintains appropriate documentation of work and project records., • Possesses knowledge of Codes and Standards applicable to design of projects ., • Develops technically accurate, clean, and deliverable drawings., • Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors and omissions., • Education: Bachelor’s or Master’s Degree in position relevant Engineering field from ABET accredited school., • Experience: No previous relevant work experience is required. Prior internships in the A/E industry is preferred., • Proficiency with Microstation, Open Roads, InRoads (Surfaces and Templates), and other related software programs preferred., • Must have a strong desire to expand knowledge base and undertake new responsibilities., • Must be proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook), • Possess strong oral & written communication skills, and have strong organizational & time management skills Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR E3XbSE32bJ

Job Description About Us At Larson Design Group (LDG), we’re more than an award-winning Architecture, Engineering, and Consulting firm; we’re a team of passionate professionals united by a bold purpose: creatively shaping our world. From designing innovative solutions to building stronger communities, we approach every project with vision, collaboration, and a commitment to excellence. As a 100% employee-owned company, every success we achieve belongs to all of us. That ownership mindset drives our decisions, inspires creativity, and fosters a culture where your voice matters. At LDG, you’ll find a dynamic, people-focused environment where we work hard, share knowledge, and celebrate wins together. We offer a flexible work environment, paid training for required licensure, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) all designed to support your growth, both professionally and personally. Your Opportunity + Impact Launch your mechanical engineering career with hands-on design, real-world projects, and a clear path toward Professional Engineer (PE) licensure. As a Mechanical Engineering Associate, you will work alongside experienced licensed engineers to support the design, analysis, and implementation of mechanical systems for a wide range of projects. This entry-level role is ideal for a motivated engineer eager to apply foundational mechanical principles, gain field experience, and grow into a fully licensed professional. Key Responsibilities • Prepare and review mechanical engineering calculations, system layouts, and construction drawings for HVAC, plumbing, piping, and related mechanical systems., • Review equipment submittals, shop drawings, and technical data to verify compliance with project specifications and design intent., • Prepare and review mechanical specifications, engineering reports, and professional correspondence., • Perform site visits, inspections, and field observations as needed to support construction and system installation., • Research, interpret, and apply applicable mechanical codes, standards, and permitting requirements (such as IMC, ASHRAE, NFPA, and local jurisdictional codes) to project designs., • Maintain accurate project files, design documentation, and engineering records in accordance with company standards., • Apply working knowledge of mechanical engineering codes and industry standards to all phases of design., • Develop technically accurate, well-coordinated, and construction-ready mechanical drawings using CAD/BIM software., • Support company Quality Assurance/Quality Control (QA/QC) processes to enhance design accuracy and reduce errors and omissions., • Perform assigned work within established project budgets, scopes, and schedules.Education and Experience, • Education: Bachelor’s or Master’s Degree in Mechanical Engineering from ABET accredited school., • Experience: No previous relevant work experience is required. Prior internships in the A/E industry is preferred., • Licensure/Certification: Engineer in Training (EIT) preferred.Preferred Qualifications, • Demonstrates a strong desire to expand knowledge and take on new responsibilities within the engineering field., • Proficient in Revit, AutoCAD, • Proficient in Microsoft Office Suite (Excel, Word, Power Point, Outlook)., • Excellent organizational and time management skills to handle multiple tasks and meet project deadlines effectively., • Strong oral and written communication skills, with the ability to work independently as well as collaboratively within a project team. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR j3ULOubK9i

The Senior Software Engineer will use an Agile approach to software development; working closely with our customers and cross-functional teams to make iterative, business relevant, software changes. This position is a key role within the software development team as you will be leading software deve

Develop an in-depth understanding of the software architecture, frameworks and functionalities. As a full stack development engineer in payment technology team you will help lead, design, enhance and build our services for Customers in an agile development environment. We expect our engineers and de

Candidates in the following states are encouraged to apply:.Join our innovative technology company as we develop cutting-edge solutions for agentic, context-aware intelligent conversations.We specialize in building platforms and products that deliver conversational agents.We are seeking an experienc

Working knowledge of unit testing, user stories or use cases, design patterns or equivalent experience, and object oriented software design.

Beyond your own execution, you will mentor intermediate and associate engineers, helping them grow in system design, code quality, and engineering judgment. Worth is now looking looking for a Senior Software Engineer to own major features and subsystems that power our core products. This is a hand

Partner closely with Analytics, BI, Product, and Engineering teams to deliver trusted, analytics-ready datasets. Familiarity with CI/CD concepts for analytics engineering (version control, deployments, testing). Python experience for data engineering or automation.

Worth AI, a leader in the computer software industry, is looking for a Senior Engineer to join our Platform team with a singular mission: to make our engineering organization faster, more reliable, and more joyful. Conduct regular interviews with engineering teams to find pain points in their daily

Working knowledge of unit testing, user stories or use cases, design patterns or equivalent experience, and object oriented software design.

Solid understanding of software design patterns, version control (Git), and code quality best practices.

Partner closely with Analytics, BI, Product, and Engineering teams to deliver trusted, analytics-ready datasets. Familiarity with CI/CD concepts for analytics engineering (version control, deployments, testing). Python experience for data engineering or automation.

A minimum of 8 years of engineering experience with a BS Degree, 6 years engineering experience with a MS degree in STEM Field, or 4 years with a PhD in STEM Field. Develop general knowledge of all aircraft systems, VTC/PTC, Engineering Design and software. The FSR will have reach-back/liaison suppo

SAIC is seeking an experienced Big Data / Parametric Data Engineer to support an Air Force program out of Orlando, FL. Data Engineering skill building ETL (Extract-Transform-Load) pipelines to support self-service data capability to the developer. Data Analyst, Data Scientist, Data Engineer, etc.

Our team is seeking a talented engineer who resolves software problem reports, utilizes software development and software design methodologies appropriate to the development and software design methodologies appropriate to the development environment. You shall use your experience with creating spec

Follows software engineering standards and assists engineers in software system or subsystem development and documentation efforts. Works from established requirements and uses established software engineering processes to develop software systems, subsystems, and system enhancements. Our talented t

The team is seeking a talented engineer who resolves software problem reports, utilizes software development and software design methodologies appropriate to the development and software design methodologies appropriate to the development environment. To be successful, you must use your experience w

C/C++ Embedded Software Engineer Location: Orlando, FL Job ID: #72295 Pay Range: $60-71/hr W2 12 months contract Must have an active secret clearance to start. Summary Looking for real-time C/C++ embedded software engineer with at least 5+ years of experience related to Linux/Real-time operating sys

Bachelor's Degree in Engineering, Computer Science, or other related discipline. Developing software products that implement Artificial Intelligence to provide cutting-edge capabilities to our customers. Engaging in every phase of the system development lifecycle, including requirements generation,

Systems Integration/Test Engineer Location: Orlando, FL Job ID: #72362 Pay Range: $75-87 ph (W2) Duration: 12 mos These positions are for the 1st Shift. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, an

Bachelor's Degree in Engineering, Computer Science, or other related discipline. Developing software products that implement Artificial Intelligence to provide cutting-edge capabilities to our customers. Engaging in every phase of the system development lifecycle, including requirements generation,

What roles are companies hiring for right now? A typical market demand pattern is clear: organizations still need entry-level software programmers, Java full stack developers, Python/Java developers, DevOps-focused engineers, and on the data side data analysts, BI analysts, data engineers, data scie

A technical leader with experience in mentoring junior engineers and assuming technical lead responsibilities. Bachelor's Degree in Engineering, Computer Science, or other related discipline. Developing software products that implement Artificial Intelligence to provide cutting-edge capabilities to

Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem. Writes discrepancy reports and performs integration regression testing to verify/validate incorp

Specific Job Summary The Associate Director, Solution Engineer – F&A Applications plays a significant role in the development, support, and stabilization of custom financial application engines and data integration. Microsoft Azure Services Microsoft Fabric Data Engineering Knowledge of ERP Sy

We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, d

The engineer in this position should have a wealth of experience engineering/installing datacenter equipment. Ability to quickly learn customer engineering databases and software. Ability to interpret an extensive variety of technical specifications in order to translate such information into a deta

Specific Job Summary The Associate Director, Solution Engineer – F&A Applications plays a significant role in the development, support, and stabilization of custom financial application engines and data integration. Microsoft Azure Services Microsoft Fabric Data Engineering Knowledge of ERP Sy

Specific Job Summary The Associate Director, Solution Engineer – F&A Applications plays a significant role in the development, support, and stabilization of custom financial application engines and data integration. Microsoft Azure Services Microsoft Fabric Data Engineering Knowledge of ERP Sy

Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems. Years experience with Software Development (C, C++, LabView preferred). Establishes functional and technical specifications and standards, sol

NAVA Software solutions is looking for a Sr.

The Software Engineer II with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. We are hands-on, designing with the latest technology and tools, and int

Minimum 8+ years of relevant experience in applications development.Expertise in Bigdata ecosystem (Cloudera Distribution) using spark and Map Reduce.Hands-on experience (advanced concepts of data structures, memory management and design patterns).Apache Spark - Hands on (preferable on Java spark).B

Our robust portfolio of offerings across the defense, space, civilian and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services and professional services. SAIC is seeking an experienced Big Data / Parametric Data Engineer to support an Air Force p

Bachelor's or Master's degree in Computer Science, Engineering, or a related field.