Trabajos feed en Houston, TexasCrear alertas

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting multiple Critical Care Registered Nurses to support the Michael E. DeBakey Department of Veterans Affairs Medical Center located at 2002 Holcombe Blvd, Houston, TX 77030. Nurses may also be asked to provide services at Community Based Outpatient Centers (CBOC). Multiple shift schedules are available. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of health care, national security, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Provides critical care nursing to Intensive Care Unit (ICU) patients, • Obtains patient history and pertinent family history, • Assesses patient and plans appropriate nursing care, • Documents plan of care and care given in patient’s medical record, • Verifies transcription of Physician orders; no verbal orders are to be accepted, • Carries out prescribed Physician orders and documents inpatient medical record, • Communicates pertinent patient data to the Charge Nurse and/or Physician as appropriate, • Re-assesses patient’s condition and revises plans-of-care based on problems that are identified, • Administers medications and Intravenous (IV) therapies, • Possesses knowledge of actions and usual dosages of the most commonly used emergency drugs and their location on the crash cart, • Assesses and documents patient responses to medications that have been administered, • Can interpret cardiac rhythms and their implications, • Reorganizes and initiates the appropriate measures in emergencies/therapies and surgical/diagnostic procedures that must be accomplished, • Instructs patients and their families regarding prescribed medications/therapies and surgical/diagnostic procedures that must be accomplished, • Assesses patient/family knowledge level, implements plan of instructions, and records the patient’s family’s demonstrated level of understanding, • Operates defibrillator, electrocardiogram (EKG) machines and cardiac monitors, and other emergency technical equipment, • Cares for patients with Swan-Gans catheters, arterial lines and mechanical ventilators, • Participates in discharge planning, • Can initiate life saving measures in the absence of Physicians, • Assures the content and correctness of a prepared report and signs the document to validate its content, • Maintains a neat personal appearance and maintains professional decorum, • Consistently applies the VA’s customer service standards, always demonstrating helpful, courteous, and respectful conduct, • Respects patient rights, including but not limited to visual and auditory privacy, • May accept a verbal order in compliance with the facility policy, • Intake and output of fluids assessed every shift, and more frequently if indicated by specific standard nursing drug care, • Reviews all laboratory data and electronic medical records, • Can titrate medications, • Can be responsible for feeding tubes which are aspirated for gastric residue prior to every intermittent feed, and every four hours for continuous tube feedings, • Performs urinary catheter care by using soap and water cleaning technique every 12 hours, or as required, • Completion of an accredited Registered Nurse academic program (BSN or ADN), • Current Registered Nurse licensure in at least one state, territory, or commonwealth of the United States or the District of Columbia, • American Heart Association (AHA) Basic Life Support (BLS) certification, • American Health Association (AHA) Advanced Cardiovascular Life Support (ACLS) certification, • One (1) year of recent Critical Care RN work experience is required, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR AH25RNikIn

Entity: Supply, Trading & Shipping Job Family Group: Supply & Trading Group Job Description: Our purpose is to bring together people, energy and markets to power and navigate a changing world. In a time of constant change and possibility we need new talent to pursue commercial opportunities, fueled by world-class insight and expertise. We’re always striving for more innovative digital solutions, sustainable outcomes and closer collaboration across our company and beyond, and you could be part of that too! This team is filled with technical industry specialists, personable people, who are driven and capable to address all the complexities that come with working in Retail Power industry. In addition to costing & competitiveness, the team is also responsible for various commercial growth initiatives and unique products. We are the core of wider Retail Supply department driving improvements in execution, processes, and accuracy. Given wide breadth of the team's responsibilities, we touch a lot of different functional areas, including Sales, Operations, Finance and Risk. • Manage and develop the retail costing process for the assigned US deregulated markets with a focus on competitiveness and business growth while mitigating key exposures, • Analyze and model cost component risks and premiums, • Develop, automate and maintain reporting of the cost components, strategies and methodologies that feed into pricing and gross margin models, • Track, optimize and explain PnL for non-tradable components, • Effectively manage the regulatory rate change process, • Track and understand market and state rules that impact retail costing, • Work closely with regulatory and compliance team when appropriate, • Cost and support development of new product initiatives, • Serve as a SME for other functional departments, including Pricing and Operations, in ISO component level costing and settlements, • Obtain quarterly sign off for all costing methodologies and prices with appropriate groups, • Build and support information library and data infrastructure, • Serve as key SME to Sales and other customers on costing related questions, • Track and analyze competitiveness feedback, • Produce market collateral to Sales, channel partners and customers, • Present in customer meetings and seminars as requested by Sales, • Develop knowledge and experience in all deregulated energy markets in NA, • Other duties and responsibilities as may arise and may be assigned by management, • Minimum 5 years of experience in a substantially similar role, • Undergraduate degree in Business, Economics, Statistics, quantitative Finance or Engineering, • Strong understanding of the retail power pricing process, including model development, • Understanding of cost structures of deregulated electric markets, including capacity, transmission, ancillary services and losses, • Proficient in collecting, querying, organizing and analyzing complex data, evaluating information and drawing logical conclusions, • Prior experience with working with ISO settlements data, • Advanced knowledge of Excel, VBA and SQL, • Show leadership, be able to work autonomously, be resourceful and well organized, • Be a self-starting individual with ability to independently lead project teams and enact business process change, • Work across multi-disciplinary functions, • Able to interact at all levels of the organization with ease, • Highly motivated, self-sufficient and enthusiastic individual who has strong desire to grow within the company Considering Joining bp? At bp, we support our people to learn and grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. bp is committed to encouraging an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees’ lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, excellent retirement benefits, and more! Travel Requirement Negligible travel should be expected with this role Relocation Assistance: Relocation may be negotiable for this role Remote Type: This position is a hybrid of office/remote working Skills: Agreements and negotiations, Analytical Thinking, Business Acumen, Commercial Business Development, Continuous Learning, Customer promise execution, Customer service delivery excellence, Deal modelling and valuation, Developing and implementing strategy, Influencing, Internal alignment, Listening, Loyalty Management, Marketing strategy and programmes, Negotiating value, Negotiation planning and preparation, Partner relationship management, Presenting, Sentiment and Trends, Thought Leadership, Trade discipline and compliance, Trading Fundamentals, Trading knowledge, Writing skills Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please ___. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job Description Job Title: Horse Groom / Wrangler / Farm Hand – Relocate to Kentucky, USA Looking for a physically rewarding job with growth and training? Work with Elite Horses in the Heart of Kentucky. We’re looking for tough, reliable, hands-on individuals to join some of the most prestigious thoroughbred horse farms in the world. Whether you’re a ranch hand, stable worker, horse rider, or just someone who’s grown up around animals and farm life — this is your shot at doing meaningful work in a unique and respected industry. About the Job: Step onto a top-tier horse farm where every day brings something new. From feeding and grooming champion horses to working alongside skilled vets and trainers, you’ll be part of a tight-knit team doing real, physical work that matters. This is a physically demanding role, and we are seeking strong, capable individuals who can meet the physical requirements of the job. What You’ll Do: -Feed, groom, and care for high-value horses -Clean stalls and maintain barn and farm areas -Walk and exercise horses, assist with veterinary care -Help out with foaling, breeding, and training (depending on experience) -Handle general ranch tasks and support the daily running of a world-class operation Why This Is Different: -Learn from the best: You’ll work side-by-side with top professionals and get real insight into elite horse care and training. -Feel the pride: These farms are home to champions — your work directly contributes to that legacy. -Be part of a team: Join hardworking individuals who respect effort, reliability, and grit. What We’re Looking For: -Previous experience with farm work, ranching, or horses -Comfortable and confident around animals -Physically strong, dependable, and ready to work outdoors in all conditions -Strong team player with solid work ethic and can-do attitude Interested? Here’s What to Do: Upload your CV today — we’re filling roles fast, and we’ll walk you through the entire process. Take the leap and do work you can be proud of. Benefits What You’ll Get: -Pay: $15–17/hour -Hours: Minimum 48 hours/week -Accommodation included -Relocation support -A chance to build a future in a respected and specialized industry

Job Description Structural Fitter/Welder At SteelCon Inc., we build the future of America's infrastructure with cutting-edge steel fabrication and structural solutions. From power to progress, we deliver unmatched quality and reliability-one project, one partnership, and one employee at a time. We live by our core values: Excellence, Responsibility, Innovation, and Teamwork. These values fuel our success and create a dynamic environment where our employees grow and thrive. With a commitment to career development, advancement opportunities, and employee well-being, SteelCon is the place where your hard work turns into long-term success. Scope of Responsibility: This position involves fabricating and assembling structural steel components using prescribed procedures, industry standards, and detailed drawings. Employees must complete SteelCon's Welder & Fabricator Training Program. Primary Purpose of this Position: Fit steel parts for structural, plate, and misc. steel assemblies per shop drawings and quality requirements. Essential Job Functions: • Planning, laying out, and fitting metal components, such as plate stiffeners, stiffened panels, bulkheads, and frames using blueprints or templates and tools while maintaining alignment tolerances., • Locating and marking reference lines, such as center, buttock, and frame lines., • Alignment of parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Setting, fitting, and erecting of structural assemblies and modules within alignment tolerances., • Installing structural foundations and outfit items such as doors, hatches, brackets, and clips., • May tack weld panels, bulkhead, assemblies, clips, and brackets., • May roll, bend, flange, cut, and shape plates, beams, and other metal parts using shop machinery, such as ironworkers, plate rolls, presses, and press brakes., • Ability to follow instructions, written and/or verbal, with little or no supervision., • Performing other related job duties as assigned in a safe and efficient manner; also, please see physical requirements. Knowledge, Skills, and Abilities: • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals, and fractions., • Ability to understand and carry out semi-complicated verbal and written instructions., • Ability to effectively communicate with co-workers and managers., • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion., • Skill in using tape measure or 1" rule., • Ability to maintain American Welding Society certification on 1-inch plate in flat position using the gas metal arc welding and flux-cored arc welding processes., • Ability to pass the fillet weld break test using the gas metal arc welding process., • Ability to pass a Steelcon Inc administered basic welding test that covers shop drawing interpretation, weld symbols, welding processes, weld process symbol interpretation and application, and a visual acuity test., • Ability to pass a Steelcon Inc administered fitting test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc., • Ability to interpret, understand, and utilize cutting lists, shop orders, and shop drawings., • Ability to operate a cutting torch to meet American Welding Society specifications., • Ability to possess pride in own workmanship, demonstrate attention to detail, and work safely., • Ability to operate forklifts, jib hoists, and overhead cranes in a safe and proper manner. Use and understand industry and Steelcon Inc adopted hand signals used for crane operations., • Ability to adjust welder to insure proper feed rate and temperature., • Stand CONTINUOUSLY over the course of the 8-to-12-hour work shift., • Walk CONTINUOUSLY over the course of the 8-to-12-hour work shift. The distances walked will range from a distance of a few feet to 60-foot length of a steel beam., • Sit only during the break and lunch periods. Rarely one will be able to sit while welding., • Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties., • Lift weights up to 35 pounds from floor to waist FREQUENTLY, during the 10 to 12 during the work shift., • Lift weights up to 85 pounds from floor to waist OCCASIONALLY, during the 10 to 12 during the work shift. Jib cranes and overhead cranes are available for the employee's assistance with lifting., • Carry weights noted above distances ranging from a few feet to the 60-feet length of the steel beam., • Push and pull drawers open and closed OCCASIONALLY to FREQUENTLY to retrieve tools. An employee will OCCASIONALLY push a beam attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds., • Climb OCCASIONALLY onto beams stacked on sawhorses to guide into place. An employee will OCCASIONALLY climb a ladder of 6 to 10 feet while performing job duties., • Stoop or crouch on an OCCASIONAL to FREQUENT basis while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job., • Kneel in the commission of job duties on an OCCASIONAL to FREQUENT basis, depending upon the job. The position will be held continuously for a few minutes to 15 minutes., • Crawl RARELY under a beam to reach the opposite side. The distance crawled is less than 3 feet., • Reach forward CONTINUOUSLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension., • Reach overhead OCCASIONALLY to guide a beam attached to the cranes and to attach the chains from the crane to the beams or to weld while underneath the beam., • Balance OCCASIONALLY to climb ladders and to walk on steel beams. An employee will not be working at unprotected heights., • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based Steelcon Inc needs., • Hear sufficiently to be aware of safety issues., • Visual ability to read and interpret cut lists and shop drawings. Safety glasses are required in the shop area., • Exposure to heat, cold, wet, and humid conditions in the shop area OCCASIONALLY., • Exposure to fumes, odors, and dust in the shop area OCCASIONALLY., • Exposure to solvents, greases, oils, and coolants OCCASIONALLY. Square, Tape Measure, Weld Lead, 4-inch grinder, 9-inch grinder, Ball Peen Hammer, Sledgehammer, Hand Torch, Wire Brushes, Chipping Hammers, Clamps, Stamping Taps, and Chains. Machines Utilized: Welder, Overhead Crane, Jib Crane, Pallets, Sawhorses, and Forklifts.

Job Description Help communities get back on their feet after hurricanes, wildfires, floods, and other disasters. Connect Staffing is recruiting for a leading disaster recovery support company that deploys rapidly-built base camps that house and feed utility crews restoring power for residents throughout the Gulf Coast region. If the idea of dropping into the heart of a recovery zone, working long hours, traveling on short notice, and pitching in wherever you’re needed excites you—we want to meet you. What We’re Looking For • Go-anywhere attitude – willing to travel nationwide (often to remote locations) * Disasters don’t pick convenient places., • Long, variable shifts – 12 to 16-hour days are common * Speed is essential in recovery ops., • Pressure resilience – calm, clear thinking under stress * Our guests (and teammates) count on us when conditions are toughest., • Cross-functional mindset – happy to jump between roles if your skills can help elsewhere on site * Small teams, big missions—everyone lends a hand., • Humanitarian spirit – genuine motivation to serve communities in crisis * This work is about people first. Open Camp-Support Roles • Housekeeping / Shower Attendant Keep restrooms, showers, sleeper trailers, and common areas sanitized and stocked with hygiene products; handle trash pickup and disposal around camp. $20/hr + OT and travel pay., • Laundry Attendant Operate commercial washers/dryers; sort, wash, fold, and deliver linens, towels, uniforms, and personal clothing. $20/hr + OT and travel pay., • Dining Hall Attendant Plate and serve buffet and grab-and-go meals, restock beverage stations, bus tables, and perform light janitorial in the dining hall. $20/hr + OT and travel pay., • Dishwasher / Utility Sanitation Wash pots, pans, plates, and utensils. Sanitize surfaces and equipment in the kitchen and other camp areas as needed. Provide general utility support as needed. $20/hr + OT and travel pay., • Houskeeping / Laundry / Dining (Front-of-house) Leads Schedule, train, and supervise their respective teams as necessary. Experience required.$30/hr + OT and travel pay. Preferred Qualifications for All Positions • Live in the Southeastern or Eastern US for priority deployment opportunities during the 2025 Atlantic hurricane season., • Have transportation such a personal vehicle to travel to deployment sites in states such as TX, LA, FL, SC, or NC., • Have related experiencein cleaning, laundry, food service, or similar. Candidates with other experience in physically demanding jobs may also be considered., • Be over 18, authorized to work in the US for any employer, and able to pass a background check and drug test., • Prior experience with disaster recovery camps or in roles such as buffet attendant, cafeteria server, banquet server, janitor, custodian, porter, laundry worker, room attendant, maid, hotel cleaner, residential cleaner, busser, server, waiter, restaurant host, or similar is a big plus! You’ll Thrive Here If You… • Operate well under pressure and find purpose in urgent, mission-driven work., • Enjoy travel and can live on-site in camp accommodations for multi-week deployments., • Embrace teamwork—helping in the kitchen one hour, unloading supplies the next., • Value safety and professionalism even in rugged environments. Compensation & Logistics • Competitive hourly pay with overtime after 40 hrs/week. Many people come back year after year for the major OT potential., • All meals and lodging provided while deployed., • Travel payat $75 per day + mileage + hourly wage. After applying, you will receive an SMS invite to an AI-based interview to learn more about your skills and experience.This interview helps us understand your qualifications and experience, and candidates who complete it will receive first consideration. Please expect a text message from(302) 405-6282 within 30 minutes of submitting your application.

Job Description Overview Tradesmen International is immediately hiring experienced Boiler Operators for projects located in the Greensboro, NC area. This is a full time opportunity, and the pay rate is up to $29/hour based on experience plus $135/day worked per diem for Travelers 60+ miles from the job site. If you are a Boiler Operator eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: * Periodically check boilers * Ensures steam quantity and quality are sufficient for air compressor operation and pneumatic controls * Verifies adequate air supply for combustion to prevent unburned combustibles in boilers * Cleans and descales boilers as directed by the plant supervisor * Completes one chemical analysis test per shift for condensate water, boiler water, water softener * Distributes chemicals into feed units based on analysis test results * Takes hourly readings and logs findings for Equipment gauges, motors, pumps, chemical tanks, fuel oil tanks, D.A. tanks, etc. • Inspects equipment, valves, and controls before turning over operations to the next shift lead, • Regularly checks gauges, meters, and control panels to ensure boiler operates within safe limits Lubricates equipment and replaces worn/damaged parts as needed • Tests boiler water for pH, dissolved solids, and other parameters to maintain proper water chemistry and prevent scaling/corrosion Maintains accurate records of boiler operations (temperatures, pressures, maintenance tasks) * Sends hourly logs via email to VBMI customer. • Acts quickly to adjust controls, shut down equipment, or call for assistance as needed, • Follows all safety protocols, wears appropriate PPE, and conducts safety inspections, • Reports issues, coordinates maintenance, and shares critical boiler operation updates with supervisors and team members Responsibilities • High school diploma or equivalency and one year of related experience or an equivalent combination of training and experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job DescriptionWho We Are: Our story began in 2011 when a group of office workers at a major logistics company in Chicago had a lunch problem. Nearby options were limited and the team was spending too much time and money traveling to their favorite restaurants. They had an idea: bring Chicago’s local restaurant culture inside the office to sell food. It was an immediate hit. When they discovered people from other companies sneaking into their office, they knew they were on to something. Fooda pioneered the concept of rotating popup restaurants inside offices. Today, we operate in 45 cities with over 100 million meals served and continue to grow rapidly. Powered by technology and a network of 1500+ restaurants, we feed hungry people at work through a platform of unique food programs located within companies, office buildings, hospitals, schools, distribution centers, and more. At Fooda, we believe a workplace food program should be something employees love and look forward to every day. Position Overview: The Multi-Unit General Manager position is critical to the success of one of Fooda’s largest enterprise clients. The main responsibilities of this role are two-fold: building and maintaining the relationship with Fooda’s client and management of daily food service operations in terms of People, Sales, and Profit with n a multi-unit loction The ideal candidate for this role is one with at least five years of management experience (preferably at a legacy food provider) and proven success of owning client relationships. This role will report directly to the Regional Manager and will also receive direction from the key client contacts. The assigned client site for this role currently offers service seven days a week. What You Will Be Responsible For: Client Management: • Develop and maintain relationships with client contacts ensuring best practices are being met, • Communicate with clients on a consistent basis as it relates to site performance and identify areas of growth or improvement, • Proactively identify and manage any challenges or issues to address customer concerns or issues, • Lead quarterly Business Reviews to enhance the relationship with client to ensure both long term and short term customer success, • Communicate and collaborate with client contacts regarding Fooda’s objectives and ensure our standards of excellence are being met across each location. Operations Management:, • Lead and manage daily operations of a multi-unit, campus type food service location to ensure the “Best in Class Service Experience” of Fooda is consistently offered to all customers, • Serve as the leader and manager for a staff of at least ten direct reports (both exempt and non-exempt status) with minimum revenues of 10 million, • Maintain a consistent presence across each location to ensure standards are being met, • Create and execute schedule for direct reports aligning to client needs for a seven-day operation Compliance, • Ensure all direct reports have updated and proper foodservice certifications, • Confirm client and employee safety regulations are being met on a daily basis, • Ensure all the units comply with government and agency standards, including but not limited to those relating to safety and health aligning to local and state requirementsFinancial Reporting, • Manage annual assigned budget and maintain costs as it relates to all operations required for the account., • Complete required reports including inventory, cash reports, etc., • Conduct inventory management to align with P&L accountability, • Oversee weekly accounting responsibilities and accurate entry into internal Fooda systems, • Serve as the main contact internally for Fooda’s Accounting department for all accounting related questions or inquiries for the site locationWhat You Should Already Have:, • At least 5-8 years of multi-unit management experience (preferably with a legacy food provider), • Proven track record of building and maintaining client relationships, • Ability to communicate effectively with both Leaders (including C-Level) and team members, • Excellent communication skills with a proven ability to lead by example in effectively communicating with multiple levels of employees, • Strong project management skills and ability to effectively manage multiple tasks and deadlines, • Demonstrated success of hiring, training and retaining team members, • Ability to analyze and report on a P&L, • Willingness to work in a seven day a week operation, • Competitive market salary, annual bonus, and stock options based on experience, • Comprehensive health, dental and vision insurance plans, • 401k retirement plan with company match, • Paid maternity and parental leave benefits, • Flexible spending accounts, • Company-issued laptop, • Daily subsidized lunch program (ours!), • A fulfilling, challenging adventure of a work experienceMust be authorized to work in the United States on a full-time basis. No recruiters please Powered by JazzHR KhqXH2oSjH

Job Description Join the Primoris Energy Services team as a Project Engineer! This pivotal role is essential for the successful execution of projects involving Gas Turbine Power Plant construction. You'll focus on ensuring contractors meet all technical requirements, guaranteeing top performance and compliance. Don't miss the opportunity to make a significant impact in this exciting field! Job Summary: The Project Engineer will be responsible for overseeing the accuracy and timeliness of design document reviews, maintaining the technical integrity of engineering and design processes, and ensuring that all project activities align with safety regulations and quality standards. The Project Engineer will work closely with the Engineering team to ensure that the overall design is safe, reliable, and fit for purpose. This includes participating in critical safety assessments such as HAZID, HAZOP, and LOPA, as well as reviewing process documents and project specifications to ensure compliance with industry standards and regulations. In addition to technical expertise, the Project Engineer will be responsible for maintaining effective communication with various engineering, operational, and functional teams. They will also need to coordinate with other engineering disciplines to address multi-discipline technical issues and provide support in answering technical queries and RFIs from contractors. Key Responsibilities: • Ensure the EPC contractor delivers process engineering work and deliverables in accordance with standards, specifications, FEED design and contractual requirements., • Work with the Engineering team to ensure the overall design is safe, fit for purpose and will operate reliably., • Participate and provide technical expertise on the HAZID, HAZOP, LOPA and Review of MOC., • Assist with reviewing process documents, guidelines and project specifications, and follow-up on due time., • Assist with review of process studies and assessments in accordance with NFPA 59A/ 49 CFR 193 for FERC s LNG project permit approval., • Ensure that the project is executed in accordance with the organization s safety regulations, with quality conformance and within schedule., • Assist with reviewing Project philosophies, process control narratives, design specifications and other process documents., • Ensure efficient communication with other company engineering, operational and functional team members., • Call for support from other engineering disciplines when multi-discipline technical issues arise., • Responsible for maintaining technical integrity of the engineering & design for their particular engineering discipline., • Answer Technical Queries and RFIs from contractors., • Participate in key design review and ensure design review readiness., • Bachelor's degree in mechanical or electrical Engineering from ABET Accredited Institution., • Minimum of 7 years of experience in a similar role., • PE license preferred., • Medium/large multi-discipline project lead experience preferred., • LNG Project experience required., • Experience in gas turbine co-gen facilities, power island mode, gas turbines, steam turbines, heat recovery steam generators, SCR's, coordination between power generation equipment, electrical distribution and LNG facility balance of plant within the LNG facility., • Experience providing expertise and support for reviewing process design and engineering activities of LNG facilities., • Proven history as Lead Process engineer on a similar LNG terminal., • Technical knowledge of all relevant codes and material specifications., • Proficient in simulation tools like Aspen Hysys, Unisim or similar platforms., • Proficient in reviewing P&IDs, Control Systems, Equipment Sizing, producing/reviewing process datasheets, technical evaluations of vendor packages., • Conversant with APCI Liquefaction Technology. • Conversant with LNG Pretreatment units and processes., • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Paid Time Off, Holiday Pay, and Community Service Paid Time Off, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programs Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit Primoris Energy Services is a major direct-hire contractor in the U.S. delivering self-performed turnkey industrial construction and EPC services. We offer these services to our clients within the refining, gas processing, chemical/petrochemical, hydrogen, power generation, mining, pulp and paper industries from the first groundbreaking activity all the way through commissioning and start-up of the project. Primoris forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. Third-Party Agency Notice Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement. #LI-GS1

DOVER PRECISION COMPONENTS: Dover Precision Components 'DPC' ('the Company') is part of Dover Corporation's ('the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: The Machine Apprentice sets up and operates CNC machine tools such as lathes, milling machines, boring machines, and grinders in order to machine plastic or metal work pieces. This position must have the ability to perform the following: Key Responsibilities: • Work to exacting tolerances, determine speeds and feeds, and sharpen own tools, • Reads blueprint or job order for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut, and determines sequence of operations., • Selects, positions, and secures tool in tool holder, • Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures., • Sets up fixture or feeding device, starts machine, and turns hand wheel to feed tool to work piece or vice versa, and engages feed, • Observes operation of machine and verifies conformance of machined work piece to specifications., • Operates bench grinder to sharpen tools, • Sets up and operates machines and equipment other than machine tools, • May operate molding machine to form sand molds used in production of metal castings \nMinimum required qualifications:, • High school diploma or equivalent required., • Must be able to measure parts using micrometers, calipers or other measuring tools, • Must be able to read and interpret drawings and blueprints \nThe ideal candidate possesses the following experience, skills, and abilities:, • Clear communication, both oral and written, • Organization skills; keep area clean to 5S standards, • Prior shop or mechanical experience desired, • Meets productivity standards by completing work in a timely manner \n*Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor. All requirements are subject to change and updates. In this role you will be working with various machinery an metalworking materials in a machine shop environment including but not limited to: cutting fluids, lubricants, and metal shavings. You will be required to wear appropriate PPE such as safety glasses, steel toe boots, hearing protection, gloves, and adhere to all safety procedures We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Nearest Major Market: Houston Job Segment: CNC, Machinist, Environmental Engineering, Industrial, Apprentice, Manufacturing, Engineering, Entry Level

Job Description Dog Trainer/ Caregiver to 3 Belgian Malinois. Need someone significantly experienced with breed and in training them (NePoPo preferred ). Provide them with exercise and stimulation throughout the day, care for them, feed them, give them their medication, arrange their vet appointments and medical care, schedules, manage their supplies, Clean up after dogs (including their crates and garage area), and as well as grooming all 3 dogs . Owners are involved but, due to exceptional life circumstances, need help with their precious dogs. We need someone to show the same care they would their own pet as they are a big part of our family. Job Type: Full-time Salary: Hourly, based on experience Hours are from 6am-9pm and broken up into shifts COVID-19 considerations: All employees must sign in, check temperature, wear mask in certain areas Company DescriptionPrivate Home where 2 adults live.Private Home where 2 adults live.

Job Description Who We Are: Our story began in 2011 when a group of office workers at a major logistics company in Chicago had a lunch problem. Nearby options were limited and the team was spending too much time and money traveling to their favorite restaurants. They had an idea: bring Chicago’s local restaurant culture inside the office to sell food. It was an immediate hit. When they discovered people from other companies sneaking into their office, they knew they were on to something. Fooda pioneered the concept of rotating popup restaurants inside offices. Today, we operate in 45 cities with over 100 million meals served and continue to grow rapidly. Powered by technology and a network of 1500+ restaurants, we feed hungry people at work through a platform of unique food programs located within companies, office buildings, hospitals, schools, distribution centers, and more. At Fooda, we believe a workplace food program should be something employees love and look forward to every day. Position Overview With our expanding growth, Fooda is looking for a highly driven, outgoing, and competitive Business Development Manager to join our Texas team. Fooda’s BDM team is a high performing group of proven sales professionals who are responsible for selling Fooda’s multiple products to B2B, mid-market, and enterprise clients across numerous verticals. This is a true “hunter” role in which you will be targeting customers throughout an assigned territory. If you are ready to contribute to a fast growing and collaborative culture, read on to learn more: What You’ll Be Responsible For: • Conduct outbound prospecting and lead generation with the goal of building relationships and setting meetings with potential Fooda customers, • Identify opportunities and create solutions for a hybrid work environment which will meet recognized needs while maximizing dollars and efficiency, • Lead all steps of Fooda’s sales cycle including presenting, negotiating and closing deals with decision makers across mid-market and enterprise companies in the Texas region, • Learn and understand the Fooda training program including best practices within the sales process and managing your activity in our CRM, • Demonstrate resourcefulness in connecting with new customers and showing diligence with follow-up communications to ensure a close, • Collaborate with Fooda’s operations team in your assigned markets to execute client launches and maintain productive, growing relationshipsWho You Are:, • You have 4+ years of new business development experience with at least two in an outside sales, closing capacity, • You are experienced in navigating decision makers across mid-market and enterprise level companies, • You chase your goals and do what it takes to win because you believe results matter most, period, • You focus on the big picture. You are strategically minded with excellent problem-solving skills, • You are a team-player, but you also thrive working autonomously., • You are successful in cold-calling and have utilized sourcing strategies to reach the decision maker, • Competitive base salary, bonus plan, and stock options, based on experience, • Comprehensive health, dental and vision plans, • 401k retirement plan with company match, • Paid maternity and parental leave benefits, • Flexible spending accounts, • Company-issued laptop, • Fully integrated sales tech stack. HubSpot, ZoomInfo, LinkedIn, and an SDR team to help support outbound activity. Powered by JazzHR yqH1HVsU5u

Job Description Equipment Operator/Front End Loader - $20/HR This is a contract position with an opportunity to be hired full-time. Location: Houston, TX (East) 77015 Schedule/Shift Details: Rotating shifts (will start on first shift for observation) and 8AM to 4PM. Then move to a rotating shift: • 1st shift: 7AM to 4PM, • 2nd shift: 3PM to 12AM Equipment Operator/Front End Loader Responsibilities/Essential Functions: Under direct supervision is operating front end loader and other heavy equipment. Moves material to and from designated areas. Inspects incoming material and fills out necessary paperwork. Conducts daily inspection of equipment. Follows all safety rules and procedures. Maintains a safe and clean work area. Handles special projects, as assigned: * Moves crude ore from stock piles to crusher system feed hopper with front end loader * Blends crude ore as instructed by plant management * Load bulk trucks using computerized scale and loading system * Strictly adhere to all facility safety policies and procedures * Inspects Front End loader at the beginning of the shift making sure fuel, water and oil are at proper levels and checks the brakes, hydraulics, greases the bucket and checks any areas directed by management. All deficiencies are reports to management as they are discovered * Inspects crushing circuit at the beginning of the shift to ensure all safe guards are in place and all equipment is operating as designed. Monitor operation of crushing circuit during shift. All deficiencies are reports to management as they are discovered. * Keep crushing area clean * Assist in other maintenance or production areas as required * Perform other duties as assigned by management * Must have forklift experience Equipment Operator/Front End Loader Qualifications: * High School Diploma or equivalent * Able to demonstrate knowledge of general equipment, maintenance, care and use of safety equipment on each piece of machinery * Understand and demonstrate proper rigging for lifting of material and other equipment, hand signals, spotter responsibility and lesser skilled work Why choose Integrity Trade Services? At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance. Interested? Want to Learn More? Please call or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities About Us Integrity Trade Services' core philosophy is "Staffing you can trust". The nucleus of this philosophy consists of an intense focus on safety, honesty, fairness and integrity. Quite simply, if we wouldn't do a job ourselves, we wouldn't post it. Fast-growing and well-connected to the industry, we're intent on providing jobs that get you to work quickly, safely, and that compensate you fairly for a job well done. #IND #ZR

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose This is a highly visible position with broad responsibilities for primarily internal communications strategic planning, execution and measurement. This position reports directly to the Director, Communications & External Affairs (& Public Information Officer “PIO”). In collaboration with the Director, Comms & External Affairs, helps manage a robust internal communications program, supports the management of crisis and incident response communications readiness program and toolkit primarily from an internal communications perspective, and will serve as a Deputy PIO in the site’s Emergency Operating Center. The Sr. Communications Advisor also will work in coordination with the Director, Comms & External Affairs, colleagues and internal stakeholders to deliver high-impact values-driven internal communications programs and projects that align with business goals and objectives and works to enhance corporate culture and reputation. Accountabilities & Responsibilities: · Coordinate with Director, Comms & External Affairs on planning/developing/ implementing dynamic internal communication programs, projects, toolkit materials, weekly eNews, Intranet news and Digital Signage posts, and visual library in support of daily operations, presentations and engagements, including the quarterly town halls, and crisis/incident response communications to maintain high-touch interaction with employees and contractors, and drive a dynamic, safety-minded, values-driven culture in support the site’s business priorities and reputation. · As internal communications content manager, network with colleagues throughout the site to identify and develop editorial ideas for weekly Intranet and emailed eNews articles and Digital Signage posts to keep employees and contractors informed, engaged and safe. Maintain a robust weekly editorial calendar for all internal communications channels – Intranet, eNews, Digital Signage and presentations that support the site’s values-driven culture, reputation and business priorities, and can be leverage in external communications, as well as internal communications channels. · Advocate to drive positive change, influence and enhance site culture and reputation through informative and collaborative communications that position site initiatives for successful internal and external outcomes, including but not limited to inspiring and empowering colleagues and building/growing positive relationships throughout the site and with our fenceline community. · Establish success metrics to provide discipline in determining the reach and impact of each internal communications initiative. · Stay abreast of industry and National Incident Management System Incident Command System (NIMS ICS) best practices that can continuously improve the site’s overall and incident response communications programs. · Coordinate with Brand, Design and Multimedia resources, collaborate across multiple departments to foster cross-functional partnerships and research official industry resources to maintain a current and dynamic Intranet presence for PEMEX Deer Park. Anticipate and plan for upcoming issues, source content and encourage defined participation within the site’s social media policy. · Serve as Deputy Public Information Officer for the site, contribute to maintaining and enhancing the crisis/incident response communication plan and toolkit, primarily from an internal communications perspective, and coordinate as needed with third-party on-call PIO support consultants. · Participate in all required training and drills supporting this role in the Emergency Operations Center. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: · Strong PIO experience working in NIMS ICS and JIC environments. NIMS ICS certification required. Site-based PIO experience preferred but not required. · Ability to act with integrity and professionalism in line with the site’s mission, vision and values, and corporate codes of conduct and ethics. · Excellent verbal and written communication and multi-media skills. · Excellent interpersonal, negotiation and conflict resolution skills. · Ability to collaborate and influence at all levels in the organization. · Demonstrated ability to contribute independently while also excelling in highly collaborative team environments. · Excellent analytic and problem-solving skills, with the ability to see multiple scenarios and impacts of internal and external communications throughout the organization and on stakeholders. · Excellent organizational skills and attention to detail. · Excellent time management skills, with proven ability to plan work and meet deadlines. · Ability to maintain confidentiality and discretion. · Ability to adapt to the needs of the company and employees. · Ability to prioritize tasks and assignments, delegating and/or collaborating when appropriate and needed to meet deadlines, and defining clear objectives, implementation expectations and accountabilities when collaborating with peers and colleagues, and metrics by which to measure the success of initiatives and targeted outcomes. · Ability to function well in a high-paced and, at times, stressful environment. · Strong knowledge and application of AP Stylebook. · Proficient with Microsoft Office 365, Adobe Creative Suite, Canva, and related software, including collaboration software and associated analytics. · Proficient with social media and Intranet platforms and analytics. · Less than 1 hour drive-time to/from PEMEX Deer Park site preferred. Experience requirements: · The position requires a bachelor’s degree in communications, public relations, public/external affairs, and/or multi-media production from an accredited university. · A minimum of 10 years of experience in internal and external communications, multi-media production, Intranet and Social Media content development and management, employee engagement, culture enhancement, public or external affairs, stakeholder and media relations, issues resolution, negotiation, and crisis/incident response communications. · Energy industry experience working in complex operating environments and manufacturing site-based communications experience preferred. · Experience with frontline and/or union-represented employees preferred. · Spanish proficiency strongly preferred but not required. · Must be able to pass all required, applicable onsite safety training. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: · Prolonged periods sitting at a desk and working on a computer. · Must be able to be on-site at PEMEX Deer Park for a minimum of 4 days/week, regular full time and extended work hours as needed. · Must be able to drive and/or travel by bus and/or shuttle to various locations within the refinery. · Must be able to lift to 15 pounds at times. · Must currently hold or be able to qualify to receive a Transportation Worker Identification Credential (TWIC) card. Note, information regarding TWIC qualification standards may be found at

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose At PEMEX Deer Park, the role of the Associate Mechanical Engineer is to provide engineering support to the assigned production area and deliver year-on-year improvements to asset integrity and reliability of equipment, ensuring safe operations and sound environmental performance. To accomplish this, the role is empowered to be the owner of static and rotating equipment within their operating units. Technical Competence Key areas for operational equipment competency include: · Rotating Equipment: Pumps, Electric Motors, General Purpose Turbines, Shaft Sealing Systems, Lubrication Systems, Fin Fans, and Blowers · Static Equipment: Pressure Vessels, Heat Exchangers, Piping Systems, Valves, Relief Devices, Bolted Joint Integrity, and Temporary Repairs Budget Influence budget through proactive identification and prioritization of maintenance expenditures: · Contributes to the development and delivery of their respective production areas’ major maintenance and operational expense budgets. · Monitors spend on maintenance work executed within the production area. · Prepares and submits well-defined work scopes and investment proposals to asset managers and site leadership teams. · Performs life cycle cost analyses to evaluate repair vs. replace alternatives and implement effective and cost-efficient solutions. Delivery Build strong working relationships with and leverage support from a broad range of stakeholders and peers, including: · Production Team – Asset Manager, Productions Specialists, Operators, Maintenance Supervisor, Inspectors, Process Engineers, and Safety Representative · Central Engineering – Rotating and Static Equipment subject matter experts, other engineering counterparts in Electrical, Civil, Control Systems and Environmental Engineering. · Maintenance and Turnarounds – Planners, Execution Team Leads, Field Coordinators, and Cost Controllers · Project Engineering · Support Functions – Finance Advisor, Capital Planning Focal Point, Contracts & Procurement. · Third Parties – Vendors, Fabrication/Repair Shops, and Engineering Contractor Accountabilities & Responsibilities: The mechanical engineer is the first point of contact for most mechanical systems in their respective production areas. Below are the key areas of responsibility with core expectations outlined. · Operations Support • Work with Operations and Maintenance counterparts to solve day-to-day problems, ensuring safe and reliable unit operation., • Participate in production team meetings to maintain awareness of key activities and unit operating status., • Conduct routine field walkthroughs with operations, maintenance, and inspection to proactively evaluate concerns with equipment and provide recommendations., • Support as a key contributor during stabilization and recovery from operational upsets. · Critical Work Processes • Manage Threats and Opportunities (MTO): Identify and prioritize threats and opportunities related to mechanical equipment, utilize problem solving skills to frame potential solutions, and take action to drive resolution. • Management of Change (MOC): Develop technical design bases, provide and facilitate technical assurance and hazard screening of design, assist with maintenance planning and execution activities, lead pre-startup safety reviews, and verify change close-out activities., • Reliability Centered Maintenance (RCM): Manage and continuously improve asset care strategies for both fixed and rotating equipment using consistent methodologies and a standardized approach., • Maintenance Execution (ME): Drive compliance for critical planned maintenance, review deferral justifications, and seek optimization opportunities., • Process Safety Compliance: Manage and timely implement Process Safety recommendations for the assigned production areas. · Technical Delivery • Leverage technical acumen to outline the detailed scope of changes to mechanical equipment. Assure compliance with industry standards and company design practices for all plant changes., • Assess health of Mechanical Equipment by utilizing: § Ensure Safe Production (ESP) – Review production unit shift reports, assess design operating window exceedances. § Manage Equipment Care (MEC) – Support completion of compliance inspections and implementation of asset care strategies for mechanical equipment. § Proactive Technical Monitoring – Review exceptions from Operations sensory rounds, assess vibration and oil sample analysis results, and recommend proactive corrective actions. • Seek to identify and close gaps in own technical competence in pursuit of qualification as a technical assurer for rotating and/or static equipment. · Problem Solving • Champion the causal reasoning mindset within the area production team., • Perform investigations on failures related to mechanical equipment bad actors., • Seek to understand the root cause of failures and mitigate findings with robust solutions to prevent re-occurrence., • Identify opportunities to reduce waste in work processes using LEAN and other continuous improvement methodologies. · Business Planning • Participate in delivery of the multi-year major maintenance plan for the production area. Ensure it is credible, competitive, affordable, and drives year-on-year improvement with regard to asset integrity, reliability, and profitability., • Ensure mechanical equipment improvements are identified, prioritized, adequately funded, and suitably categorized within business plan portfolios. · Project Management • Provide updates on current project statuses and upcoming work scopes to relevant stakeholders. Contribute to decisions that prioritize the best interests of the site., • Challenge self and production team to assess that work is executed by the right team in the organization based on size and complexity. Turnaround Support (Note – turnaround-related tasks can vary based on assigned production area) • Support work scope development and field execution for mechanical equipment, • Coordinate mechanical equipment surveillance., • Participate in production unit pre-startup safety reviews and commissioning activities. Challenges · Able to leverage technical, project management, and interpersonal skills to drive work items. · Able to prioritize a high workload within the production team. · Able to work independently with minimal supervision while completing work deliverables with a high level of detail and quality. · Able to work at all levels of the organization and have the appropriate skills to influence others in the organization. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Preferred qualifications: · Prior experience in a refining or petrochemical manufacturing complex. · Prior experience in support of general-purpose static and/or rotating equipment. · Certified Maintenance & Reliability Professional (CMRP) and/or Vibration Analyst certifications is a plus. Experience requirements: · Must have legal authorization to work in the US on a full-time basis. · Bachelor’s degree in engineering (mechanical engineering strongly preferred). · Minimum six (6) years of experience in a related manufacturing industry. · Knowledge of maintenance and reliability concepts, including a sound understanding of engineering and maintenance processes. Awareness of the concepts of risk assessment, Reliability Centered Maintenance, Management of Change, and structured problem solving. · Excellent troubleshooting, analytical, verbal, and written communication skills, with the ability to interface with personnel from diverse backgrounds at all levels of the organization. Proven ability to manage and prioritize multiple projects. · Demonstrated experience with static equipment and/or rotating equipment, along with a sound understanding of operations, maintenance, and reliability practices and processes · Knowledge of industry codes and standards related to static and/or rotating equipment and their practical application within the refining and petrochemical industries. · Demonstrated skill in working with teams to achieve a common goal. · Aspirational Technical Authority competency in static and/or rotating equipment. Physical requirements: · Lifting requirements of 25 lbs. · Walking distances of up to a mile · Climbing portable and vessel ladders to elevations over 100 feet · 25-50% of work is performed in an outside petrochemical manufacturing environment. · Occasional extended work hours during planned and unplanned maintenance events.

Job Description Title: Instrumentation and Electrical Engineer Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The I&E Engineer is responsible for the design, implementation, troubleshooting, and optimization of instrumentation, electrical systems, and process control (DCS) systems. This role supports safe, efficient, and reliable operations through technical expertise, project leadership, and collaboration with operations, maintenance, and project teams. Responsibilities: Process Control / DCS Engineering: • Design, program, and troubleshoot DCS systems (Yokogawa experience preferred)., • Design, specify, purchase, and install DCS devices and instruments., • Configure DCS interlocks, sequences, PID control loops, signal indicators, and approved modifications from production., • Diagnose, modify, and update DCS programs; investigate process or safety interlock issues., • Support signals connected to DCS: 4-20 mA, Foundation Fieldbus, Profibus, Modbus, Wireless, and On/Off signals., • Provide first-level support for DCS process and safety interlocks; maintain DCS hardware contracts, system infrastructure, and graphics., • Design, specify, and oversee installation of sensors, control valves, interlocks, DCS I/O, signal conditioning, transformers, MCCs, 480VAC starters, 120VAC/24VDC circuits, and VFDs., • Review I&E drawings, prepare specifications, manage contractor bids, and supervise I&E projects., • Conduct loop checks, operation checks, and parameter settings for instruments and electrical devices., • Provide technical guidance, troubleshooting expertise, and leadership on task teams and special assignments., • Collaborate with Operations to improve safety, yield, productivity, and uptime., • Support Process Safety Management (PSM) initiatives including Process Hazards Analysis, Management of Change-Technology, root cause analysis, and RAGAGEP compliance., • Train personnel to enhance process operations and maintain up-to-date knowledge of technology and industry best practices., • Participate in cost-benefit analysis, capital projects, and process optimization initiatives., • B.S. in Electrical, Instrumentation, or Chemical Engineering, • Minimum of 5 years of experience doing I&E work in a manufacturing, chemical, or related industry., • Strong experience with Yokogawa distributed control systems; experience with other DCS platforms is a plus., • Knowledge of discrete, continuous, and sequential control, loop tuning, adaptive control, and feed-forward control modeling., • Proven ability to diagnose, troubleshoot, and resolve equipment and process issues., • Familiarity with key PSM elements including Process Hazards Analysis, Process Technology, Management of Change, and RAGAGEP., • Demonstrated ability to lead, mentor, and coach team members in a collaborative environment., • Strong project management skills with the ability to prioritize and manage multiple complex, time-sensitive projects., • Excellent technical writing, interpersonal, and communication skills., • Self-motivated with initiative and the ability to work independently., • Proficient in Microsoft Office (Word, Excel, PowerPoint). Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job Description Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: Journeyman Machinist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Reimbursement Relocation Assistance Available) Remote: On-Site Pay Range: $27.25-$30 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacture, lease, sale, and service of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers each of which is the leader in their respective markets throughout the world. Job Summary Efficiently, effectively, safely, and independently set up, adjust, troubleshoot, and operate a variety of MANUAL AND/OR CNC MACHINES including lathes and mills producing parts to exacting tolerances and dimensions at production rate (very tight tolerancing) This is a low-volume and high mix production environment. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Interpret complicated blueprints, sketches, and engineering specifications., • Determine the sequence of operations, number of cuts required, and method of setup., • Select, mount, and align various specialized machine attachments and standard or improvised tooling., • Make necessary and correct machine adjustments to improper machine functioning or cutting action., • Measure, mark, and scribe dimensions and reference points on material or work pieces as guides., • Calculate and set controls to regulate machining factors, such as speed, feed, coolant flow, and depth/angle of cut., • Accurately monitor and verify quality in accordance with statistical processes or other control procedures., • Use a variety of machinist hand tools and precision measuring instruments., • Understand materials and applications as required., • Solve problems relative to the work-holding arrangement, unusual materials, machine setting, tools, product specifications, and fabrication methods for the production process., • Align and fasten work using standard fixtures and established methods., • Install and adjust cutting tools consistent with the type and size of material being machined., • Adjust feeds, speeds, and depth of cut to machine quality parts, per documentation., • Inspect parts for conformance to specifications using measuring instruments such as gages, calipers, micrometers, and comparators., • Visually inspect parts for burrs or damage machined surfaces., • Maintain equipment to ensure cleanliness, accuracy, and reliability specific to requirements., • Implement lean initiatives by identifying and providing suggestions on areas for improvement., • Effectively apply lean concepts and tools in the work area., • Observe all company policies and procedures, including safety rules, and maintain a clean and orderly work area. Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose This is a highly visible position with broad responsibilities for primarily external communications strategic planning, execution and measurement. This position reports directly to the Director, Communications & External Affairs (& Public Information Officer “PIO”). In collaboration with the Director, Comms & External Affairs, helps manage a robust crisis and incident response communications readiness program and toolkit, including media relations, and will serve as Deputy PIO in the site’s Emergency Operating Center. On a day-to-day basis, the Sr. External Affairs Advisor works in coordination with the Director, Comms & External Affairs, colleagues and external stakeholders to help deliver high-impact external relations and social performance initiatives and activities in the neighboring communities and industry organizations. S/he also collaborates with the Internal Communications team, as needed, to deliver integrated communications campaigns and projects and maintain flexibility in the Communications team providing timely counsel and deliverables to meet the diverse communications and stakeholder engagement needs of the site. Accountabilities & Responsibilities: · Collaborate with the Director, Communications & External Affairs to develop a comprehensive external communications strategy and values-driven community and industry-focused initiatives for the site that align with business goals and objectives and works to enhance corporate reputation. The scope of external communications includes issues management, media, social media and community relations, social investment, strategic positioning, and external stakeholder relations. · Collaborate with the Internal Communications team to provide external communications planning and implementation for projects and initiatives that require integrated communications and to help balance the Communications team’s overall workload. · Establish success metrics for each initiative to provide discipline in determining the social impact and return on reputation investment outcomes. · Stay abreast of industry and National Incident Management System Incident Command System (NIMS ICS) best practices that can continuously improve the site’s overall and incident response communications programs. · Advocate with the Communications team to drive change, influence and enhance site culture and reputation through informative and collaborative communications that position site initiatives for successful internal and external outcomes, including but not limited to inspiring and empowering colleagues and building/growing positive relationships within the industry and neighboring communities. · Coordinate with Brand, Design and Multimedia resources, collaborate across multiple departments to foster cross-functional partnerships and research official industry resources to maintain a current and dynamic website and targeted social media presence for PEMEX Deer Park. Anticipate and plan for upcoming issues, source content and encourage defined participation within the site’s social media policy. · Serve as Deputy Public Information Officer for the site, contribute to maintaining and enhancing the crisis/incident response communication plan and toolkit, and coordinate as needed with third-party on-call PIO support consultants. Participate in all required training and drills supporting this role in the Emergency Operations Center. · In collaboration with the Director, Communications & External Affairs, develop and implement an effective community outreach strategy and build a supporting volunteer base. Evaluate requests for funding and allocate budget for promotional spending donations and advertising. · Log all external engagements and financial- and volunteer time-based social investment donations in the site’s External Engagements database for reporting per corporate guidelines and ensure colleagues participating in external engagements are doing the same to ensure complete and accurate documentation. · Support the Director, Communications & External Relations, in representing the site at community events and encouraging site leaders to do the same. · Manage a media relations program that protects and enhances the PEMEX Deer Park brand and includes developing positive mainstream news and trade media coverage and positioning opportunities, as well as preparation of statements for media, employees and the community. · Develop and implement outreach initiatives focused on environment, education, child empowerment, and life skills development, with an emphasis on STEM and future-ready workforce skills. · Collaborate with local community organizations and educational institutions to identify programs where our volunteer base can contribute meaningfully to advancing learning and community service initiatives. Job Knowledge, Skills & ExperienceSpecify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: · Strong PIO experience working in NIMS ICS and JIC environments. NIMS ICS certification required. Site-based PIO experience preferred but not required. · Ability to act with integrity and professionalism in line with the site’s mission, vision and values, and corporate codes of conduct and ethics. · Excellent verbal and written communication and multi-media skills. · Excellent interpersonal, negotiation and conflict resolution skills. · Ability to collaborate and influence at all levels in the organization. · Demonstrated ability to contribute independently while also excelling in highly collaborative team environments. · Excellent analytic and problem-solving skills, with the ability to see multiple scenarios and impacts of internal and external communications throughout the organization and on stakeholders. · Excellent organizational skills and attention to detail. · Excellent time management skills, with proven ability to plan work and meet deadlines. · Ability to maintain confidentiality and discretion. · Ability to adapt to the needs of the company and employees. · Ability to prioritize tasks and assignments, delegating and/or collaborating when appropriate and needed to meet deadlines, and defining clear objectives, implementation expectations and accountabilities when collaborating with peers and colleagues, and metrics by which to measure the success of initiatives and targeted outcomes. · Ability to function well in a high-paced and, at times, stressful environment. · Strong knowledge and application of AP Stylebook. · Proficient with Microsoft Office 365, Adobe Creative Suite, Canva, and related software, including collaboration software and associated analytics. · Proficient with social media and Internet platforms and analytics. · Less than 1 hour drive-time to/from PEMEX Deer Park site preferred. Experience requirements: · The position requires a bachelor’s degree in communications, public relations, public/external affairs, and/or multi-media production from an accredited university. · A minimum of 10 years of experience in internal and external communications, multi-media production, Internet and Social Media content development and management, employee and community engagement, public or external affairs, stakeholder and media relations, issues resolution, negotiation, and crisis/incident response communications. · Previous experience in change management, employee engagement, culture enhancement, and international business, is preferred. · Energy industry experience working in complex operating environments and manufacturing site-based communications experience strongly preferred. · Experience with frontline and/or union-represented employees preferred. · Spanish proficiency strongly preferred but not required. · Must be able to pass all required, applicable onsite safety training. Physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: · Prolonged periods sitting at a desk and working on a computer. · Prolonged periods of activity and engagement with small and large groups of people in indoor and outdoor settings. · Must be able to be on-site at PEMEX Deer Park for a minimum of 4 days/week, regular full time and extended work hours as needed. · Must be able to drive and/or travel by bus and/or shuttle to various locations within the refinery. · Must be able to lift up to 15 pounds at times. · Must currently hold or be able to qualify to receive a Transportation Worker Identification Credential (TWIC) card. Note, information regarding TWIC qualification standards may be found at

Job Description General Overview At ThinkOnward, we're more than a company—we're a global community of experts and problem solvers. Our mission? To inspire and activate our community, uniting their passion, wisdom, and creativity to cleverly solve complex geoscience and data science challenges for our clients. Together, we equip our talented community of geoscientists and data scientists with cutting-edge tools, data, and resources. We specialize in pushing boundaries, fostering collaboration, and delivering innovative solutions that accelerate value-adding decisions. Our two core market offerings are helping solve some of the energy industry's biggest challenges. • Subsurface Solutions: Through our Open Talent Community and cloud-based Projects platform we apply cutting edge AI-driven workflows to deliver a reduction in time to investment decisions for our clients by 20-30%. Summary: We're expanding our GenAI go‑to‑market with mid‑market oil & gas operators and service companies. As Senior BD/Sales Manager you will be responsible for the full BD and Sales lifecycle from new business model design to early lead generation from a wide business network,, to nurturing and advancing deals through a healthy and growing pipeline, honing in on a winnable opportunity space, structuring and negotiating MSAs/SOWs, and closing deals. Success means scalable net revenue through targeted wins, persistent network leverage with strong conversion, predictable forecasting, and growing ARR. What You'll Do • Source & qualify: Build and prosecute a targeted list of mid‑market O&G accounts with focus on the Americas region (North America primary; LatAm secondary). Activate your personal network and outbound motions (events, warm intros) to generate sales‑qualified opportunities., • Grow new markets by selling to Family Offices, Ultra High Net Worth Individuals and other entities interested in allocating capital into oil and gas opportunities across the life-cycle and risk/return spectrum., • Design GTM & offers: Partner with Marketing to create NBD business models (subscription, usage‑based, services + software bundles, virtual O&G technical assessment of investment opportunities) and segment‑specific value props; co‑own campaign messaging, landing pages, and nurture tracks., • Perform market research: Assess attractive offer space by understanding competitive pressures and customer prioritized needs. Identify winning business models from across industries that could be tested in O&G., • Accelerate the funnel: Implement a structured, data‑driven sales process (cadences, scoring, enrichment, multi‑threading). Instrument the pipeline to shorten cycles, raise win‑rates, and increase average deal size. Use HubSpot to track and manage funnel. Collaborate with Sales and BD team to continually refine deal templates, and seek to automate BD/Sales processes using GenAI leveraging the ThinkOnward Innovation and Product Engineering teams., • Deal strategy & negotiation: Lead pricing strategy, proposals, RFP responses, and negotiate MSAs, DPAs, SLAs, and SOWs in partnership with Legal/Finance; manage redlines to closure., • Keep leads warm: Orchestrate multi‑touch nurturing across email, events, content, and executive briefings; maintain momentum on in‑flight deals and revive stalled ones., • Close & expand: Land lighthouse wins and expand via cross‑sell/upsell to adjacent assets/teams; hand off to delivery seamlessly and support early value realization to seed references., • Partner ecosystem: Cultivate channel and alliance relationships (ISVs, GSIs, boutique partners) that open doors and co‑create demand in target basins/segments., • Forecast with precision: Own weekly forecasting and commit calls; maintain CRM (HubSpot) hygiene and evidence‑based stage definitions so leadership can plan with confidence. Must‑haves • Proven network in mid‑market O&G (E&Ps, OFS, midstream) and a track record of closing six‑ and low seven‑figure deals into that segment; we are not looking for someone without an O&G network., • Network with Family Office, Ultra High Net Worth Investors a plus., • Demonstrated expertise selling or applying Generative AI (LLMs, RAG, prompt orchestration, safety/guardrails, data governance) to real workflows; familiarity with crowdsourcing/challenge‑based models is a plus (priority on GenAI)., • A structured BD/sales methodology (e.g., MEDDICC, Challenger, SPICED) applied in practice to automate and scale the funnel—sequencing, intent data, enrichment, multi‑threading, and mutual close plans., • Strong commercial acumen: pricing/packaging, value quantification, business case development, and negotiating complex agreements (MSA/SOW/SLAs/DPAs)., • Excellent executive presence, gravitas, comfort speaking to senior executives and wealthy investors, and cross‑functional leadership with Marketing, Product, Legal, and Delivery., • Tools: CRM (Salesforce or HubSpot), sales engagement (e.g., Outreach/Sequences), pipeline analytics, and light productivity stacks for proposals., • Spanish and/or Portuguese proficiency and existing contacts in South America (Brazil, Colombia, Argentina, etc.)., • Experience selling AI‑enabled solutions into subsurface, drilling/completions, production optimization, capital projects, or data/platform teams., • Full-Time, • Client and conference travel (25-40%), including occasional travel to Latin America

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose As the Payroll & Reporting Analyst, you will oversee our union and non-union payroll and employee benefits programs, while also contributing to broader HR operations, analytics, and strategic initiatives. This role is critical in ensuring compliance, accuracy, and a best-in-class employee experience. You will have a strong background in payroll processing, benefits administration, and 401(k) plan compliance, and will serve as a go-to resource for employees across the organization. This is a dynamic position for a hands-on professional who is passionate about HR, eager to grow, and ready to take on responsibilities that impact the organization across various levels. Accountabilities & Responsibilities: Payroll & Benefits Administration • Lead end-to-end payroll processing across union and non-union, ensuring accuracy and legal compliance (federal, state, local)., • Ensure accurate payroll tax filings, garnishments, benefits deductions, bonuses, and shift differentials., • Manage payroll audits, W-2 processing, year-end reporting, and reconciliation with Finance., • Reconcile payroll data and validate reports pre- and post-processing., • Handle life events (new hires, terminations, life changes), billing reconciliation, and vendor liaison, • Oversee 401(k) administration: enrolments, contributions, compliance testing, and filings (e.g., Form 5500), • Partner with HR, Finance, and external vendors to ensure clean, compliant processes., • Support employee onboarding and offboarding from a payroll standpoint., • Assist with audits, internal controls, and process improvements across HR operations., • Ensure compliance with SOX, FLSA, and relevant federal and Texas-specific wage laws., • Maintain payroll and HRIS documentation, internal controls, and standard operating procedures., • Partner with HR, Finance, and Legal on audits, compliance reviews, and confidential investigations., • Identify automation opportunities and implement process improvements to enhance efficiency and accuracy. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: • Strong diligence and analytical skills. Excellent communication and cross-functional collaboration abilities. Required: • Bachelor’s degree in human resources, Accounting, Business Administration, or related field., • 5–7 years of progressive experience in payroll processing and HRIS systems administration., • Experience with payroll in union and non-union manufacturing/refinery environments., • Strong knowledge of payroll tax regulations and labor law compliance., • Experience with HRIS Systems The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions: • Prolonged periods sitting at a desk and working on a computer., • You must be able to be onsite at PEMEX Deer Park for a minimum of three days per week., • Must be able to drive and/or travel by bus and/or shuttle to various locations within the refinery., • Must be able to lift to fifteen pounds at times.

Job Description Electrical Engineer - III Houston TX or Tulsa, OK Experience level: Mid-senior Experience required: 5 Years Education level: Bachelors degree Job function: Engineering Industry: Oil & Energy Compensation: View salary Total position: 1 Relocation assistance: Yes Visa sponsorship eligibility: No Job Locations: Tulsa, OK or Houston, TX Note: Kindly complete the submission template provided in the Job Insights section and upload it as Cover Letter when submitting candidates to Reflik. Please review all details carefully before uploading to ensure accuracy. In the Candidates Bio/Summary of Experience, please provide a strong and compelling explanation of why this candidate is a strong fit for the role. The note should highlight relevant skills, and alignment with the job requirements, rather than using generic statements or copying & pasting lines directly from the resume. Required Attachments: Please attach the candidates resume in Word (.doc/.docx). LinkedIn (or other) generated resumes will not be accepted As an Electrical Engineer, youll lead the design and optimization of electrical systems that power essential infrastructurepipelines, compressor stations, and storage facilities. Youll apply your technical expertise to integrate advanced technologies like automation, real-time monitoring, and energy storage, driving efficiency and innovation across operations. A key part of your role is ensuring safety through the implementation of arc flash mitigation, fault detection systems, and rigorous compliance with regulatory and environmental standards. Youll also manage complex projects from concept to completion, aligning engineering solutions with business goals and timelines. This is a high-impact role where your leadership and problem-solving skills will directly contribute to operational reliability, safety, and strategic growth. Your work will challenge you, and with our Core Values to guide you, youll quickly learn and grow with us. Responsibilities/Expectations: Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infrastructure reliability Provides technical expertise in power distribution, electrical schematics, and system layouts for both new construction and upgrades to existing facilities Manages complex engineering projects from concept to completion ensuring alignment with business goals timelines and budget constraints Ensures compliance with all relevant safety, environmental and regulatory standards across electrical systems and project execution Collaborates with cross-functional teams to deliver engineering solutions that meet internal and external customer needs Mentors and supports the development of junior engineers fostering technical growth knowledge sharing and a culture of continuous improvement Education/Years of Experience: Required: Bachelors degree in electrical engineering and eight (4) years engineering experience in natural gas, data centers or related industry Preferred: PE License Preferred: Masters degree in electrical engineering Job Requirements: Demonstrates excellent organizational/interpersonal skills and safety as a main priority Proficiency in Microsoft Office Application and PC skills? Proficiency in reviewing arc flash studies and implementing improvements Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.)? Preferred: Experience with PLCs? Preferred: Project Management experience? ?Preferred: Experience working in Preliminary-Front End Engineering and Design (Pre-FEED), Front End Engineering Design (FEED), or Engineering, Procurement, Construction (EPC) of small to medium facility projects Preferred: Proficiency in designing, and implementing, Instrumentation systems, including Programmable Logic Controllers (PLC) and Human Machine Interface (HMI) systems

Job DescriptionElectrical Engineer - Senior Houston TX or Tulsa, OK Experience level: Mid-senior Experience required: 10 Years Education level: Bachelors degree Job function: Engineering Industry: Oil & Energy Compensation: $141,000 - $160,000 Total position: 5 Relocation assistance: Yes Visa sponsorship eligibility: No Job Locations: Tulsa, OK or Houston, TX Note: Kindly complete the submission template provided in the Job Insights section and upload it as Cover Letter when submitting candidates to Reflik. Please review all details carefully before uploading to ensure accuracy. In the Candidates Bio/Summary of Experience, please provide a strong and compelling explanation of why this candidate is a strong fit for the role. The note should highlight relevant skills, and alignment with the job requirements, rather than using generic statements or copying & pasting lines directly from the resume. Required Attachments: Please attach the candidates resume in Word (.doc/.docx). LinkedIn (or other) generated resumes will not be accepted Job Description: As an Electrical Engineer, youll lead the design and optimization of electrical systems that power essential infrastructurepipelines, compressor stations, and storage facilities. Youll apply your technical expertise to integrate advanced technologies like automation, real-time monitoring, and energy storage, driving efficiency and innovation across operations. A key part of your role is ensuring safety through the implementation of arc flash mitigation, fault detection systems, and rigorous compliance with regulatory and environmental standards. Youll also manage complex projects from concept to completion, aligning engineering solutions with business goals and timelines. This is a high-impact role where your leadership and problem-solving skills will directly contribute to operational reliability, safety, and strategic growth. Your work will challenge you, and with our Core Values to guide you, youll quickly learn and grow with us. Responsibilities/Expectations: Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infrastructure reliability Provides technical expertise in power distribution, electrical schematics, and system layouts for both new construction and upgrades to existing facilities Manages complex engineering projects from concept to completion ensuring alignment with business goals timelines and budget constraints Ensures compliance with all relevant safety, environmental and regulatory standards across electrical systems and project execution Collaborates with cross-functional teams to deliver engineering solutions that meet internal and external customer needs Mentors and supports the development of junior engineers fostering technical growth knowledge sharing and a culture of continuous improvement Other duties as assigned Education/Years of Experience: Required: Bachelors degree in electrical engineering and eight (8) years engineering experience in natural gas, data centers or related industry Preferred: PE License Preferred: Masters degree in electrical engineering Job Requirements: Demonstrates excellent organizational/interpersonal skills and safety as a main priority Proficiency in Microsoft Office Application and PC skills? Proficiency in reviewing arc flash studies and implementing improvements Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.)? Preferred: Experience with PLCs? Preferred: Project Management experience? ?Preferred: Experience working in Preliminary-Front End Engineering and Design (Pre-FEED), Front End Engineering Design (FEED), or Engineering, Procurement, Construction (EPC) of small to medium facility projects Preferred: Proficiency in designing, and implementing, Instrumentation systems, including Programmable Logic Controllers (PLC) and Human Machine Interface (HMI) systems

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose The IR Business Partner plays a critical role in supporting front-line supervisors and managers in managing day-to-day industrial relations matters. This position serves as a key liaison between management and union representatives, ensuring constructive engagement and resolution of workforce issues. The IR Business Partner contributes to maintaining a stable labor environment by investigating grievances, interpreting contractual provisions, and supporting the IR Manager in delivering strategic IR initiatives. Accountabilities & Responsibilities: · Advise and assist line supervisors and managers on daily IR issues affecting their teams. · Collaborate constructively with union stewards and committee members to address employee concerns. · Draft formal responses to grievances and information requests in alignment with contractual and legal standards. · Accurately document discussions from grievance meetings, union-management negotiations, and other IR-related engagements. · Maintain organized records of grievances, unfair labor practices (ULPs), arbitration cases, and negotiation outcomes. · Collaborate and resolve pay-related issues stemming from contractual interpretations with Payroll. · Lead or support the IR Manager on key deliverables and strategic initiatives as assigned. · Collaborate with the Industrial Relations Manager and Deer Park site leadership to define the organization’s long-term and short-term Industrial Relations and Human Resources strategy. · Assists with the talent acquisition process, which may include recruitment, interviewing, and hiring of qualified job applicants, particularly for hourly and front-line workers; collaborates with managers as required to understand skills and competencies required for openings. · Works closely with management and employees to improve work relationships, build morale, and increase productivity and retention. · Provides guidance to the human resources and management team on IR matters and assists with resolution of day-to-day human resources and labor relations issues. · Manages routine labor relations and human resources inquiries related to policies, procedures, and bargaining agreements; refers complex matters to appropriate management personnel. · Serves as an initial contact and liaison for intake and assessment of employee grievances. · Conducts investigations into employee relations and employee grievance matters. · Assists with the preparation of documents and records required for contract negotiations, meetings, and negotiations with employee and labor organizations. · Performs routine tasks required to administer and execute human resources programs including, but not limited to, compensation, benefits, and leave; disciplinary matters; disputes and investigations; performance and talent management; productivity, recognition, and morale; occupational health and safety; and training and development. · Attends and participates, as required, in employee disciplinary meetings, terminations, and investigations. · Maintains current knowledge of applicable laws, regulations, and best practices in employment law, human resources, and talent management. · Participate in professional development and networking conferences and events. · Performs other related duties as assigned. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Ability to act with integrity, professionalism, and confidentiality. · Strong verbal and written communication skills. · Strong interpersonal, negotiation, and conflict resolution skills. · Strong organizational skills and attention to detail. · Strong time management skills, with proven ability to meet deadlines. · Strong analytical and critical thinking skills. · Ability to adapt to the needs of the company and employees. · Ability to interact with all levels of the organization. · Ability to function well in a high-paced and, at times, stressful environment. · Thorough understanding of laws, regulations, and guidelines related to contract negotiations, HR, and employment. · Proficiency with, or able to quickly learn, human resource information system (HRIS) and talent management systems. · Proficient with Microsoft Office Suite or related software. Experience requirements: · Bachelor’s degree in industrial relations, Human Resources, Business, or a related field preferred · Advanced degrees or certifications (e.g., SHRM, PHR, CP, CCP, SCP or similar) are beneficial. · 7+ years in labor relations, employee relations, or HR roles preferred. · Prior experience working with unionized environments is highly valued. Physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions: · Prolonged periods sitting at a desk and working on a computer. · You must be able to be onsite at PEMEX Deer Park a minimum of three days per week. · Must be able to drive and/or travel by bus and/or shuttle to various locations within the refinery. · Must be able to lift to fifteen pounds at times. · Must currently hold or be able to qualify to receive a Transportation Worker Identification Credential (TWIC) card. Note, information regarding TWIC qualification standards may be found at

Job Description WeldFit is looking for a self-motivated candidate with experience to fill our CNC Machinist position. This position is responsible for operating the CNC Horizontal Boring Mill in the shop by performing the duties and responsibilities below. • Machine parts to specifications using machines such as Horizontal Boring Mills, • Able to understand and edit G code and M code programs, • Understand speeds and feeds for machining and proper set ups, • Calculate dimensions and tolerances using knowledge of mathematics and instruments such as calipers and micrometers, • Set up, adjust and operate all machines, • Check work pieces to ensure alignment and materials onto machines, • Clean lubricate machines as needed, • Monitor the feed and speed of the CNC machines, • Work and think safety at all times, • High School Diploma or equivalent, • Prior machine shop experience required, • Verbal Communication in English, • English Reading Skills, • English Writing Skills, • Time Management Skills, • Technical Communication Skills, • Blueprint Reading Skills, • Mathematic Aptitude, • Ability to stand, walk, bend and climb, • Capability of lifting up to 75 lbs. on a regular basis, • High Level of manual dexterity, • Good mechanical aptitude, • Ability to distinguish various colors / color coding, • Ability to pass vision test, • Willing to admit to hearing baseline testCompany DescriptionEstablished more than 50 years ago, WeldFit is a pipeline products and services company that helps oil and gas customers optimize their pipeline operations. With headquarters in Houston, Texas, we are strategically located to serve your needs anywhere in the world. We are ISO certified, meaning you can depend on the safety and reliability of our products and services.Established more than 50 years ago, WeldFit is a pipeline products and services company that helps oil and gas customers optimize their pipeline operations. With headquarters in Houston, Texas, we are strategically located to serve your needs anywhere in the world. We are ISO certified, meaning you can depend on the safety and reliability of our products and services.

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose The Senior Human Resources Business Partner (Senior HRBP) is a strategic HR leader responsible for partnering with refinery leadership to drive talent strategy, workforce planning, and HR initiatives that support operational and business objectives. This role requires experience acquired in private equity-backed organizations, start-up environments, and the oil and gas sector. The Senior HRBP will serve as a trusted advisor to senior leaders, influencing and guiding decisions related to organizational design, leadership development, employee relations, performance and change management. The ideal candidate thrives in fast-paced, high-growth environments, and has a proven record of implementing scalable HR processes that align with business expectations. Accountabilities & Responsibilities: • Partner with senior refinery leadership to align HR strategies with business goals and operational priorities., • Drive organizational design and workforce planning initiatives to support growth, restructuring, and operational efficiency., • Lead talent acquisition, retention, and succession planning strategies tailored to high-demand technical and leadership roles., • Coach and advise senior leaders on performance management, workforce planning, and team effectiveness, including the facilitation and calibration of end-of-year performance rankings to ensure fairness, consistency, and alignment with organizational objectives., • Advise leaders on performance management, employee relations, and compliance with federal, state, and local labor laws., • Implement scalable HR processes suitable for start-up and growth environments while maintaining compliance and operational excellence., • Foster a high-performance culture that emphasizes accountability, collaboration, and continuous improvement., • Coach and mentor managers to enhance leadership capability, employee engagement, and retention. Ensure compliance with refinery-specific safety, labor relations, and workforce management standards., • Coach and advise senior leaders on performance management, workforce planning, and team effectiveness., • Partner with Learning & Development and external consultants to create and deploy targeted development programs., • Analyze workforce data and organizational metrics to inform strategy and address talent gaps., • Guide change management efforts related to organizational design, culture transformation, and leadership transitions., • Collaborate with Talent Acquisition to align talent pipelines with future business needs., • Ensure HR programs and policies are effectively communicated, understood, and consistently applied., • Perform additional responsibilities and projects as assigned to meet business needs and priorities. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: • Strategic mindset with the ability to align HR practices with business priorities., • High emotional intelligence and ability to build trust across all levels of the organization., • Excellent facilitation, communication, and relationship management skills., • Project management skills and ability to manage multiple high-impact initiatives., • Comfort working in fast-paced, operational, and safety-sensitive environments., • Experience in union and non-union workforce environments preferred., • 10+ years of progressive HR experience, with at least 5 years in a senior business partner or equivalent role., • Experience in private equity-backed organizations, start-ups, and oil and gas industry required., • Strong business acumen with the ability to align HR strategies to business outcomes., • Proven record in organizational design, change management, and talent strategy in dynamic environments., • In-depth knowledge of Texas and federal labor laws, safety regulations, and HR compliance requirements., • Exceptional interpersonal and communication skills, with the ability to influence and build relationships at all levels., • Ability to manage multiple priorities and thrive in a fast-paced, high-pressure environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions: • Prolonged periods sitting at a desk and working on a computer., • You must be able to be onsite at PEMEX Deer Park for a minimum of three days per week., • Must be able to drive and/or travel by bus and/or shuttle to various locations within the refinery., • Must be able to lift to fifteen pounds at times.

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose At PEMEX Deer Park, the role of the Graduate Mechanical Engineer is to provide engineering support to the assigned production area and deliver year-on-year improvements to asset integrity and reliability of equipment, ensuring safe operations and sound environmental performance. To accomplish this, the role is empowered to be the owner of static and rotating equipment within their operating units. Technical Competence: Key areas for operational equipment competency include: • Rotating Equipment: Pumps, Electric Motors, General Purpose Turbines, Shaft Sealing Systems, Lubrication Systems, Fin Fans, and Blowers, • Contributes to the development and delivery of their respective production area’s major maintenance and operational expense budgets., • Monitors spend on maintenance work executed within the production area., • Prepares and submits well-defined work scopes and investment proposals to asset managers and site leadership teams., • Production Team – Asset Manager, Productions Specialists, Operators, Maintenance Supervisor, Inspectors, Process Engineers, and Safety Representative, • Central Engineering – Rotating and Static Equipment subject matter experts, other engineering counterparts in Electrical, Civil, Control Systems and Environmental Engineering., • Maintenance and Turnarounds – Planners, Execution Team Leads, Field Coordinators, and Cost Controllers, • Project Engineering, • Support Functions – Finance Advisor, Capital Planning Focal Point, Contracts & Procurement., • Third Parties – Vendors, Fabrication/Repair Shops, and Engineering Contractors Accountabilities & Responsibilities: The mechanical engineer is the first point of contact for most mechanical systems in their respective production areas. Below are the key areas of responsibility with core expectations outlined. Operations Support • Work with Operations and Maintenance counterparts to solve day-to-day problems, ensuring safe and reliable unit operation., • Participate in production team meetings to maintain awareness of key activities and unit operating status., • Conduct routine field walkthroughs with operations, maintenance, and inspection to proactively evaluate concerns with equipment and provide recommendations., • Manage Threats and Opportunities (MTO): Identify and prioritize threats and opportunities related to mechanical equipment, utilize problem solving skills to frame potential solutions, and take action to drive resolution., • Management of Change (MOC): Develop technical design bases, provide and facilitate technical assurance and hazard screening of design, assist with maintenance planning and execution activities, lead pre-startup safety reviews, and verify change close-out activities., • Reliability Centered Maintenance (RCM): Manage and continuously improve asset care strategies for both fixed and rotating equipment using consistent methodologies and a standardized approach., • Maintenance Execution (ME): Drive compliance for critical planned maintenance, review deferral justifications, and seek optimization opportunities., • Leverage technical acumen to outline the detailed scope of changes to mechanical equipment. Assure compliance with industry standards and company design practices for all plant changes., • Assess health of Mechanical Equipment by utilizing: • Ensure Safe Production (ESP) – Review production unit shift reports, assess design operating window exceedances., • Manage Equipment Care (MEC) – Support completion of compliance inspections and implementation of asset care strategies for mechanical equipment., • Proactive Technical Monitoring – Review exceptions from Operations sensory rounds, assess vibration and oil sample analysis results, and recommend proactive corrective actions. • Champion the causal reasoning mindset within the area production team., • Perform investigations on failures related to mechanical equipment bad actors., • Seek to understand the root cause of failures and mitigate findings with robust solutions to prevent reoccurrence., • Participate in delivery of the multi-year major maintenance plan for the production area. Ensure it is credible, competitive, affordable, and drives year-on-year improvement with regard to asset integrity, reliability, and profitability., • Provide updates on current project statuses and upcoming work scopes to relevant stakeholders. Contribute to decisions that prioritize the best interests of the site., • Challenge self and production team to assess that work is executed by the right team in the organization based on size and complexity., • Turnaround Support (Note – turnaround-related tasks can vary based on assigned production area), • Support work scope development and field execution for mechanical equipment, • Coordinate mechanical equipment surveillance., • Participate in production unit pre-startup safety reviews and commissioning activities. Challenges • Able to leverage technical, project management, and interpersonal skills to drive work items., • Able to prioritize a high workload within the production team., • Able to work independently with minimal supervision while completing work deliverables with a high level of detail and quality., • Able to work at all levels of the organization and have the appropriate skills to influence others in the organization. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications: • Prior internship, co-op, or full-time work experience in a refining or petrochemical manufacturing complex., • Prior experience in support of general-purpose static and/or rotating equipment., • Prior experience with concepts related to maintenance and reliability, risk assessment, Management of Change, and structured problem solving., • Must have legal authorization to work in the US on a full-time basis., • Bachelor’s degree in mechanical engineering., • Excellent troubleshooting, analytical, verbal, and written communication skills, with the ability to interface with personnel from diverse backgrounds at all levels of the organization. Proven ability to manage and prioritize multiple projects., • Lifting requirements of 25 lbs., • Walking distances of up to a mile, • Climbing portable and vessel ladders to elevations over 100 feet, • 25-50% of work is performed in an outside petrochemical manufacturing environment., • Occasionally extended work hours during planned and unplanned maintenance events.

Job Description Kennel Manager Location: Middle Tennessee Job Type: Full-Time | On-Site About Riverview Farm Kennel Do you have a passion for dogs and strong leadership skills? Riverview Farm Kennel, a busy and well-established dog kennel in Middle Tennessee, is seeking a dedicated and experienced hands-on Kennel Manager. This is an excellent opportunity for someone who loves working with animals and thrives in a leadership role. What You’ll Do * Ensure top-quality care and safety for all dogs * Feed, exercise, and monitor dogs daily * Oversee animal health and well-being, identifying any concerns promptly * Maintain cleanliness, sanitation, and organization of the facility * Lead by example and provide direction to kennel staff What We’re Looking For * Previous experience in animal care and kennel management * Strong leadership and organizational skills * Compassionate, confident, and comfortable handling all dog breeds * Excellent communication and problem-solving abilities * Ability to multitask and handle physical work * Flexibility to work evenings, weekends, and holidays What We Offer * Relocation assistance upon hire * Housing provided with utilities included * Competitive pay based on experience * Health, vision, and dental insurance * Retirement plan Company DescriptionRiverview Farm Kennel is a well established kennel in Middle Tennessee. We are world renowned breeding and training facility that specializes in British Labradors. This particular breed is best known for their calm temperament, smaller size and a strong hunting instincts especially in retrieving and fieldwork. Our kennel is often a center for developing well-rounded, skilled and family-suitable dogs. We preserve the British Labrador heritage of calm demeanor, intelligence, and exceptional retrieving ability, whether for use in the field, trials or companionship. Riverview Farm Kennel has some the top dog trainers their knowledge and perseverance is second to none.Riverview Farm Kennel is a well established kennel in Middle Tennessee. We are world renowned breeding and training facility that specializes in British Labradors. This particular breed is best known for their calm temperament, smaller size and a strong hunting instincts especially in retrieving and fieldwork. Our kennel is often a center for developing well-rounded, skilled and family-suitable dogs. We preserve the British Labrador heritage of calm demeanor, intelligence, and exceptional retrieving ability, whether for use in the field, trials or companionship. Riverview Farm Kennel has some the top dog trainers their knowledge and perseverance is second to none.

Job Description We are seeking an experienced wide / large format digital press operator to work on large format printing equipment including roll and sheet fed, heat presses, CNC cutters, laminators and more. Willing to learn new pieces of equipment is a must. Large format experience such as Inca, Uvistar and Vutek background is needed. Knowledge of prepress (EFI Fiery) and the ability to set up files is important. Experience with Graphic art software such as Adobe Creative Suite and Pitstop, Efi workflows, and CNC is preferred. Skills: Operating solvent or wide format printers, CNC; cutting substrates and sign finishing. Weeding and taping; aligning vinyl on a substrate; using a squeegee; operating light, etc. Attention to quality, troubleshooting and prioritizing work flows in addition to being able to operate and maintain the necessary finishing equipment. Under general direction, the operator is responsible for all aspects of large / wide format production. This is a high volume fast paced environment. RESPONSIBILITIES • Works with co-workers and customers with file transfers, FTP access, photo library options, online proofs, etc., • Inspects jobs for accuracy before sending them to the plotter or printer, • Provides proofs as necessary, • Maintains accurate electronic and paper record of File Storage and Disks, • Follows a layout to place computer-generated vinyl or full color graphic images on a pre-determined substrate or medium, • Prepares substrates for application, • Performs finishing operations such as laminating, encapsulating, and/or mounting of printed pieces, • Installs signs and graphics, • Performs other duties as needed, such as consulting with customers, etc., • Follow a layout to place computer-generated files per job instructions on wide format digital presses or vinyl or full color graphic image(s) on a predetermined substrate or medium., • Accurately prepare substrates for application. This may include cutting, painting, laminating, cleaning and maintaining the substrates for application., • Perform quality assurance measures pre- and post-construction by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards (dpi, bubbles, ragged edges, loose seams)., • Perform finishing operations such as laminating, encapsulating, and/or mounting of printed pieces., • Thread laminating or encapsulating material into machine, set temperature, pressure, and side guides for proper feeding of material., • Operate the laminator maintaining proper fit and settings, and feed material into laminator., • Communicate with other employees and customers in a calm and professional manner; express self verbally and listen well., • Report inventory levels and stock to be reordered to the manager., • Help unload and store raw materials; clean and maintain storage areas., • Maintain production rate consistency; meet or exceed established minimum rates., • Work on different projects simultaneously., • Run proof sheet and secure approval for production run., • Perform routine machine maintenance and minor repairs when necessary., • Keep the production area neat, clean and organized., • Understand the ordering process enough to take an order if necessary., • Clean and maintain equipment and other tools as necessary., • Perform installations as necessary., • Production and manufacture of digital printing and finishing. Company DescriptionAward winning, commercial full service printing and promotional products company started in 1977. We value our people, our customers, and delivering a high quality product on-time.Award winning, commercial full service printing and promotional products company started in 1977. We value our people, our customers, and delivering a high quality product on-time.

Job DescriptionSalary: JOB SUMMARY This position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. ESSENTIAL FUNCTIONS • Planning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling., • Design of gas transmission, gathering and distribution piping and facilities; gas storage; liquids pipelines; compressor stations; emergency shutdown; pipeline interconnects; block valve settings; pipeline pigging; odorization systems; dehydration; measurement and regulator stations; instrumentation and controls; interpretation and application of regulatory codes and standards; materials and equipment requisitioning; technical specifications and engineering standards., • Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting to develop PFDs, P&IDs, site plans, and piping drawings in order to create a construction set of drawings, • Have a working knowledge of compressor station, M&R, and facility design in accordance with PHMSA DOT Part 192. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB • Application of fluid and dynamics, thermodynamics, compression cycle and hydraulic machine principles to design and selection of compressors, flow and pressure control equipment, pumps, pressure vessels, atmospheric tanks, coalescing filtration and adsorption equipment including integration of engineered packages into complete process plants., • Performs a wide variety of complex engineering assignments in areas of design, development, analysis, evaluation, testing, preparation of construction bid documents, and project management., • Interfaces with clients to identify and meet their expectations., • May perform other duties as deemed necessary by supervisor. OTHER SKILLS AND ABILITIES • Ability to listen to the voice of the client and translate into engineering design that meets or exceeds expectations., • Ability to demonstrate excellent oral and written skills., • Ability to take initiative and be a self-starter., • Ability to demonstrate organizational skills, including attention to detail., • Proven ability to organize, schedule, and complete work on-time and with high quality., • Knowledge of DOT, FERC, OSHA, and EPA codes and standards., • Demonstrate the ability to build and sustain positive working relationships across geographical boundaries., • Strong work ethic., • Ability to travel up to 15%., • Knowledge and experience using engineering design software such as HYSYS, GasCalc, Pipeline Toolbox, Caepipe, Caesar II, or similar is a plus. EXPERIENCE REQUIREMENTS • E.I.T or P.E. Designation preferred., • Experience Guidelines (minimum is Grade 1 for this position):, • Grade 1: 0-3 years, • Pay range will depend upon relevant experience and education. EDUCATION REQUIREMENTS PHYSICAL REQUIREMENTS ESSENTIAL TO PERFORM THE FUNCTIONS OF THE JOB • Bachelor of Science Bachelors Degree in Mechanical Engineering, Petroleum Engineering, Natural Gas Engineering, or Chemical Engineering. PHYSICAL REQUIREMENTS ESSENTIAL TO PERFORM THE FUNCTIONS OF THE JOB • May be required to lift up to 30 lbs. If object is over 30 lbs. you are required to have written permission from your supervisor prior to lifting or moving the object., • Frequent use of auditory, verbal and visual capabilities in order to adequately communicate (policies, procedures and objectives) via phone, computer and in person., • Frequent sitting for extended periods of time to carry out computing functions., • Frequent concentration for extended periods of time, paying attention to detail to analyze information., • Frequent use of hands to operate the computer or office equipment., • Occasional squatting, stair climbing or crawling to be able to install computer hardware. *This position is on-site and located in Houston, Texas. No relocation available at this time. Please note, we are not accepting inquiries or candidates from third party staffing agencies at this time. EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.

Job DescriptionEngineer- Piping Layout & Design Expertise • Degree (BS preferred) in Mechanical, Piping Design & Drafting, or relevant discipline., • 10+ years relevant experience working in conceptual design, pre-FEED, FEED, EPCI projects, on-shore projects, modules and skidded equipment, and design. Experience in piping layout for onshore process plants preferred., • Demonstrate the ability to work across multiple disciplines, independently consolidate and analyze information from various sources to develop effective, complete, and holistic client solutions., • Demonstrates advanced knowledge in instrument and process piping lay outs, structure support lay outs, and 3D modeling., • Possesses knowledge and practical use of modeling software such as AutoCAD, 3D CAD (PDMS) or equivalent., • Develop the whole facility layout drawing/ model with complete piping systems integrating other package/ product design drawings into the model identifying any gaps, conflicts, or inconsistencies., • Ensure designs adhere to applicable industry and project standards with a mind to ensuring that the structures will ultimately meet targeted regional / country regulations and standards., • Produce piping Material Take-Off documents for finalized submission and authorization for construction., • Release all project/ product Issued for Construction (IFC) drawings and specifications., • Provide clarifications to the fabricators, suppliers, and sub-contractors during fabrication as required., • Attend design review meetings, engineering interface meetings, Health Safety and Environment (HSE) workshops, risk workshops, etc. with clients/ contractors, and internal teams as required., • Support project teams throughout the design, construction, transportation, and installation portion of the project and provide guidance to the project engineering teams as required.

Job Description (This opportunity is in Grand Forks, ND. Must be willing to relocate.) Little Miracles, Inc. is in search of a Pediatric Physical Therapist who is a mission-driven professional who yearns to be part of something bigger than oneself! Feed your passion for what you do and make a difference in the lives of the people you serve! This is a great opportunity to work for a growing, locally owned and therapist run company that uniquely supports children and families in the Greater Grand Forks community. About Us: Little Miracles Inc. is a family owned, therapist operated business that encompasses a multidisciplinary Pediatric Therapy Clinic and a licensed Child Care Center. Offering premier pediatric therapy services and an inclusive childcare center sets us apart in our region. Our staff and clients thrive in a fun, energetic and supportive environment! Pay Range: $70,000 - $100,000 Sign-on Bonus: $5,000 Benefits: * Quality mentorship * Employer subsidized health insurance * Access to Aflac products Dental insurance * Employer matched 401K * Paid Time Off * Paid holidays * Childcare discount * Annual continuing education stipend * CPR, AED and First Aid training * Friday afternoons off * No nights or weekends * Employee referral bonus * Lucrative bonus structure Work Schedule: Patient care hours are 8:00-5:30 Monday through Thursday and 8:00-12:00 on Friday. Requirements: * Strong communication and interpersonal skills * Flexibility with a team mindset * Mission-driven, solution-minded professional * Time management and organization skills * Resilience and ability to maintain a positive attitude * Ability to pass an advanced FBI background check * Licensed as a Physical Therapist in the state of ND or eligible for licensure * Compassionate individual who is understanding and accepting of unique needs of children and families #hc153403

Job Description Earn up to $5000 in hiring incentives! The City of Pearland, TX is seeking to hire a full-time Treatment Plant Operator II - Surface Water to improve aspects of the day-to-day operations of our Utilities department. Are you service-oriented? Could you excel in a fast-paced environments? If so, you may be perfect for this position! The Treatment Plant Operator II -Surface Water earns a competitive salary of $24.07 - $26.05/hourly based on qualifications. Additionally, the city pays all premiums for our employees' dental, long-term disability protection, and life insurance plus the majority portion of the medical premium for employees and their dependents. We also offer a retirement plan through the Texas Municipal Retirement System (TMRS) with a 2:1 employer match, life insurance, disability, access to the city's recreation fitness center, employee assistance program, educational assistance, 11 paid holidays and 2 designated paid holidays, paid vacation, sick leave, and an active wellness program focusing on physical, mental, and financial health. Earn up to $5,000 in hiring incentives when you join the City of Pearland's Utilities team as a licensed TCEQ Water Operator! Incentive amounts are based on your license grade: Grade C License - $2500 Grade B License - $3500 Grade A License - $5000 ABOUT THE CITY OF PEARLAND Pearland is one of the fastest growing cities in Texas due to affordable housing, outstanding schools, safe neighborhoods, and superb quality of life. Ranked as one of the top ten safest cities in Texas, Pearland residents know their families are safe and secure in the community and surrounding areas. Our close proximity to Houston, just a short 20-minute drive to downtown, allows residents to experience all the city has to offer including professional sports, world-class cultural amenities, and recreation. Employees of the City of Pearland use multi-directional communication and cross-functional teams to promote a greater understanding of the organization by employees at all levels. We have created a culture of continuous learning that encourages and supports employee development and growth. Our work environment is one where innovation is not only supported but encouraged. A DAY IN THE LIFE AS THE TREATMENT PLANT OPERATOR II - SURFACE WATER This position serves as a team leader for SWTP Operator I staff by providing instruction and assistance in the responsibilities associated with the monitoring of pump stations, chemical feed systems, and all other primary process areas. The SWTP Operator II assures routine calibration of continuous monitoring instruments used for compliance reporting; adjusts chemical metering pumps; compiles data for monthly reports; determines process chemical dose and flow adjustments; determines proper corrective procedures regarding water quality, implements these procedures and performs follow ups. Coordinates budget needs with PCS. Minimum Education and Experience Requirements: • Requires High School graduation or GED equivalent supplemented by specialized courses/training experience in the water industry or related field. Preferences include: college courses or certification(s) in environmental science, microbiology, or chemistry., • Experience with membrane filters is preferred. Special Certifications and Licenses: • The minimum license requirement for this position is a valid Class C Surface Water Operator license issued by the Texas Commission on Environmental Quality, • Texas Class "C" Driver's License Job Posted by ApplicantPro

Job Description Empower Your Future: At MetOx International, we're pioneering the next era of energy security and abundance through breakthrough superconducting technology. As a Senior Process Engineer, you'll join a dynamic team committed to strengthening the world's energy systems to make them more resilient, efficient, and reliable. Based at our global headquarters in Houston, TX, the Senior Process Engineer will lead process optimization projects, drive defect reduction, and support scaling and documentation of critical process steps. Key Responsibilities: Engineering Leadership · Leads development and improvement of thin-film deposition process on customized MOCVD and PVD toolsets · Designs and executes structured experiments (DOE) to optimize film quality, uniformity and repeatability across substrates and control. · Develops and owns SPC-related responses to inline monitor and end-of-line test variation. · Troubleshoots deposition processes related to vacuum integrity, target material feed, contamination, film stress, or adhesion. · Characterizes, fingerprints, and develops new monitors for thin films Project Execution · Owns project development projects from concept through qualification and production hand-off. · Defines project scope success criteria and implementation timelines for new or improved PVD and MOCVD deposition processes · Interfaces closely with tool design, mechanical, electrical and production teams to ensure seamless integration of custom vacuum equipment into manufacturing workflows Documentation & Quality · Develops and maintains detailed process documentation including process recipes, run sheets, and standard operating procedures. · Creates and revises control plans and PFMEA focused on deposition process risks and quality control metrics. · Ensures compliance with relevant vacuum equipment standards and material handling requirements Mentorship · Mentors junior engineers in vacuum technology, thin film science and process troubleshooting. · Supports knowledge transfer and technical training to the operations team Other duties as assigned Minimum Qualifications: · Bachelor's degree in Materials Science, Chemical Engineering, Mechanical Engineering, Physics or related field · 4 years of process engineering experience · Experience in thin film deposition process development Preferred Qualifications: · Advanced degree in Materials Science, Chemical Engineering, Mechanical Engineering, Physics or related field · Experience with process development on alpha-level toolsets. · Experience leading vacuum system commissioning, process matching, target material selection, and chamber/process tuning in high volume manufacturing environments for CVD deposition systems. · Deep understanding of film growth mechanisms, reaction kinetics, substrate/tool interactions, and vacuum system dynamics · Familiarity with Six Sigma, statistical analysis, or automation tools Knowledge, Skills, & Abilities: · First-level hardware troubleshooting skills for deposition equipment · A mechanistic understanding of how process parameters and hardware configuration affect process outcomes · Strong communicator with commensurate people and organization skills to ensure project execution between Operations and Engineering staff with minimal supervision · Strong analytical and problem-solving skills to resolve vexing process issues · Rigorous data-driven approach to analyzing engineering trials as well as production data with a quality-first mindset Physical Demands: This position requires sitting at a desk and viewing a computer screen for extended periods while working or performing other office tasks. Ability to move around the office, including occasional standing, walking, and bending to retrieve documents, attend meetings, or use office equipment. Some light lifting may be required, up to 20 lbs. MetOx is proud to offer competitive benefits including: · Health, dental, and vision available on the first day of employment · 401(k) match · Paid parental leave & adoption assistance · Educational reimbursement · And more! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionJob DescriptionLead Electrical EngineerReports to the Instrumentation and Electrical Department ManagerResponsibilities: • Lead a Team of Electrical Engineers and Electrical Designers on large FEED and Detail Engineering Projects, • Develops project scope of work for electrical engineering and design, • Monitors and advises Department Manager of major project changes, • Prepares detail design schedule milestones, staff loading schedules and man-hour estimates for engineering and design tasks, • Reports progress, updates schedules, manages staffing needs and hourly budget, • Establishes engineering and design concepts and data for scope assigned to group and assures technical accuracy and conformance to project requirements, • Prepares project scope deviations documentation as required, • Researches suitable solutions, estimated cost and timescales, • Trains less experienced engineers, • Reviews vendor documents, • Independently evaluates the selection and/or modification of standard techniques, procedures, criteria and systems to efficiently meet project objectives, • Applies standard engineering design tasks and exhibits a working knowledge of applicable codes, • Plans, schedules, and coordinates detailed phases of work, • Reviews and generates design data and/or deliverables from various inputs, • Performs the more sophisticated and complicated designs in accordance with established company standards, • Coordinates details and miscellaneous design criteria with other disciplines, • Supervises, checks and assists other electrical personnel in their assignments, • Prepares and /or supervises and checks documents and drawings as required, • Manages all Electrical personnel on the team including Workshare Office staff, • Manages all Electrical design deliverables on the project, including electrical power studies (load flow, short circuit, motor starting, protective relay coordination studies, etc.), electrical area classification drawings, one-lines, schematics and wiring design; lighting, power, grounding, and cable tray plan drawings, and specification of electrical equipment such as Motor Control Centers and Switchgear in Petrochemical Plants.Qualifications:, • Bachelor of Science degree in Electrical Engineering, • Effective writing and verbal communication skills, • Proficiency with ETAP or SKM, • Professional Engineer License and the ability to register in multiple states is requiredDesired Experience:, • Fifteen or more years of experience performing electrical engineering and design on projects in the Oil & Gas and PetroChem industries, • Experience in LNG, Energy Transition, Carbon Capture, Refining and/or Petrochemical plants., • Project lead experience.

Job DescriptionFront End Loader - $18-$19/HR This is a contract position with an opportunity to be hired full-time. Location: Houston, TX 77015 Shift: Must be able to work a rotation shift (8am to 4pm, 4pm to 12am, and 12am to 8am). Integrity Trade Services is hiring Front End Loader on the East side of Houston. Hourly rate is $18-$19 per hour DOE. Must be available to interview this week. Front End Loader Responsibilities/Essential Functions: Under direct supervision is operating front end loader and other heavy equipment. Moves material to and from designated areas. Inspects incoming material and fills out necessary paperwork. Conducts daily inspection of equipment. Follows all safety rules and procedures. Maintains a safe and clean work area. Handles special projects, as assigned: • Moves crude ore from stock piles to crusher system feed hopper with front end loader, • Blends crude ore as instructed by plant management, • Load bulk trucks using computerized scale and loading system, • Strictly adhere to all facility safety policies and procedures, • Inspects Front End loader at the beginning of the shift making sure fuel, water and oil are at proper levels and checks the brakes, hydraulics, greases the bucket and checks any areas directed by management. All deficiencies are reports to management as they are discovered, • Inspects crushing circuit at the beginning of the shift to ensure all safe guards are in place and all equipment is operating as designed. Monitor operation of crushing circuit during shift. All deficiencies are reports to management as they are discovered., • Keep crushing area clean, • Assist in other maintenance or production areas as required, • Perform other duties as assigned by management, • Must have forklift experience 3+ years, • Experience operating a backhoe 3+ yearsFront End Loader Qualifications:, • High School Diploma or equivalent, • Able to demonstrate knowledge of general equipment, maintenance, care and use of safety equipment on each piece of machinery, • Understand and demonstrate proper rigging for lifting of material and other equipment, hand signals, spotter responsibility and lesser skilled work, • Ability to read, understand, and follow instructions on material paperwork, • Good written and oral communication skills, • Reliable transportation, • Pass screenings At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance. Interested? Want to Learn More? Please text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities About Us Integrity Trade Services' core philosophy is "Staffing you can trust". The nucleus of this philosophy consists of an intense focus on safety, honesty, fairness and integrity. Quite simply, if we wouldn't do a job ourselves, we wouldn't post it. Fast-growing and well-connected to the industry, we're intent on providing jobs that get you to work quickly, safely, and that compensate you fairly for a job well done. #IND #ZR

Job Description The Futures Clearing Technology group is dynamic, fast-paced, and allows low latency, high performance, straight-through-processing of futures trades by enabling connectivity to several clearinghouses globally. You will join a newly formed team within the Futures Clearing Technology group that is responsible for providing a communication layer between Futures Clearing Systems and Futures Product Processor (books and records system). This group will be responsible for transforming, normalizing, and sourcing the clearing data coming from upstream systems into the product processor and also extracting the data out of the product processor and feed to other internal applications. The team has fully embraced a modern architecture with Microservices running on the OpenShift/Kubernetes platform with communication via APIs and messaging platforms such as Kafka. Development work is done by leveraging best coding practices including Code Quality, Clean Code, SOLID Design practices, and testing mind, to deliver top-of-the-line services. The key focus is given to automating build, test, and deployment pipelines utilizing best-in-class DevOps tools. This role suits experienced full-stack developers who are passionate about developing technological solutions, delivering excellence, and collaborating in a team environment. Key Responsibilities: • Research and understand DevOps best practices based on industry and Citi standards., • Design software components in a microservices cloud-native architecture to be resilient, stateless, scalable, and testable with automation and reusability as key objectives., • Develop services and APIs in Java, Spring boot frameworks utilizing the latest frameworks and libraries with an emphasis on design patterns, code quality, secure coding practices, and writing testable code with tests., • Implement automated build, test, and deployment pipelines utilizing the latest DevOps tools available at Citi., • Mentor/coach junior team members, establish standards, share best practices, • Partner with QA engineers to develop test cases and build out an automated testing suite for both API and microservices., • Work closely with users, stakeholders, BAs, product managers, and other development teams to understand problem space, and brainstorm ideas, approaches, and solutions., • Collaborate with other development teams to build shared libraries and components for reuse across the organization., • Participate in daily Scrum ceremonies and conduct sprint demos for stakeholders., • Partner with support teams to formally hand over the software released to production and provide rotational support for the platform., • Proactively create and manage relevant application documentation using Confluence, JIRA, and SharePoint., • Demonstrate a culture of continuous process improvements by applying lessons learned from recent projects to future projects., • Appropriately assess risk when business decisions are made, demonstrating consideration for the firm's reputation and safeguarding Citigroup, its clients, and assets. Required Skills, Experience, and Competencies • Strong technical background, experience with Software Development Lifecycle, and experience managing stakeholders in a global and dynamic environment., • Experience designing and developing cloud-native applications with a microservices architecture running on Docker/OpenShift/Kubernetes platform, • 10+ years of experience in application development using Java, SQL (RDBMS or No SQL databases), and messaging platforms ( such as Kafka, MQ, Tibco, Solace, etc)., • Experienced in Spring frameworks, and Spring Boot technologies., • Experienced in API development & application security best practices (Oath, TLS, PKI, etc.), • Experienced in Gradle , maven build tools, Git/Bitbucket, Junit, Mockito, etc, • Experienced in Caching such as Redis, Gemfire, etc., • Experienced in XML, JSON, etc., • Passion and commitment to adopting industry best practices and new technologies with an exploratory mindset, • Proactive, detail-oriented, and self-motivated professional who can hit the ground running, • Experience working in an Agile/Scrum work environment and mentoring/coaching junior developers, • Strong communication and presentation skills, • Innovative ideas and can-do attitude, • Ability to manage tight deadlines or unexpected priority changes, excellent time management, • Strong problem-solving skills, • Willingness to ask questions, challenge the status-quo, and seek out answers, • Ability to work independently, multi-task, take ownership, and drive strategy, • Impeccable integrity and judgment Desirable Skills, Experience, and Competencies • Experience in Spring Cloud Stream, and Reactor programming., • Experience in application monitoring systems such as Prometheus., • Experience in log aggregation systems such as Loki., • Financial Services experience, understanding of listed derivatives- particularly futures.

Job Description PEMEX Deer Park is a highly complex refinery located 18 miles east of Houston in Deer Park, TX, and is a part of the PEMEX group which is a fully integrated oil company in the Americas, working across the entire value chain: exploration, production, industrial processing/refining, logistics and marketing. PEMEX Deer Park provides a diverse and inclusive work environment that employs approximately 1000 employees with another 1200 contractors on site. The refinery’s rated capacity is 340,000 barrels per day and has the feed flexibility to process multiple grades of crudes to produce the high-quality transportation fuels the world needs. The PEMEX Deer Park site is co-located with other 3rd party chemical facilities allowing for further integration and optimization of the refinery and its products. We set high standards of performance and ethical behaviors and offer challenging and fulfilling job opportunities in a number of fields. We take great pride in our ability to ensure the health and safety of our workers and the environment while being a good neighbor and have a positive impact on the local community where we work. BENEFITS: We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental, and vision benefits, and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees, where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. Job Purpose This role is centered on environmental air permitting across the Deer Park site. The successful candidate will lead efforts to ensure air permits are obtained, reviewed, and renewed, as applicable, proactively monitor site performance, and maintain alignment with regulatory requirements. Accountabilities & Responsibilities: Key Responsibilities: 1. Prepare and maintain agency documents including air permits, emission reports, incident reports, variance petitions, and surveys., 2. Coordinate with contractors to support permitting efforts, including but not limited to determining permitting scope, any required modeling, and calculation reviews., 3. Perform emissions calculations and assess the impact of operating conditions., 4. Assist in selecting air pollution control technologies for new or modified equipment., 5. Respond to agency requests regarding permitting efforts with timely, high-quality information., 6. Assess operational changes or equipment modifications for regulatory impacts (e.g., NNSR)., 7. Tracking emissions credits associated with permitting efforts., 8. Submitting regulatory reports for various programs, such as greenhouse gas, HECT, MECT, etc. Secondary Responsibilities: Site Environmental Support In addition to permitting, this role supports broader environmental compliance and site operations. Additional Duties: · Provide coaching and hands-on support to plant personnel on environmental standards. · Monitor site performance against permit and regulatory requirements; identify opportunities for continuous improvement. · Interpret and clarify regulatory/legal requirements applicable to the site. · Manage assigned environmental programs and procedures. · Develop and revise site environmental policies and training programs. · Deliver environmental training aligned with regulatory and company standards. · Participate in 24-hour on-call rotation for incident reporting. · Interact with external regulatory agencies and auditors. · Support turnarounds, capital projects, and field audits. · Analyze environmental data and trends; recommend performance improvements. · Monitor and update environmental incidents in site tracking systems. · Manage change within assigned process areas per site procedures. Job Knowledge, Skills & Experience Specify the educational background, qualifications and experience that would typically be required to fully and effectively perform this job. Key qualifications & experience requirements: · Bachelor’s degree in Engineering or Sciences. · Minimum 5 years in environmental roles or experience within petrochemical or refining facilities. · Proficiency in Microsoft applications and enterprise systems (e.g., Cority Enviance, Enablon). · Additional Requirements: · Experience with operating permits (CAA, NPDES, PSD, NSR, Title V). · Direct interface experience with state/federal regulatory agencies. · Strong communication, organizational, and interpersonal skills. · Legal authorization to work in the U.S. for any employer other than current.

Job DescriptionThe CNC Machine operator ensures that the machine is set up properly, functioning well, and producing quality products. He or she runs the machine and adjusts it to control speed, material feed and the punching process. The ideal candidate is safety minded, embraces change, is a problem solver, an innovative thinker, and is experienced in prioritizing production runs to ensure that parts are available to meet production demands. Machine operator can sort jobs by material and/or part numbers, sequence operations, and pull/stock material as required. CORE VALUES: • Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated), • Respect ( employees, customers, suppliers, our brand), • Teamwork ( collaboration, open communication, be passionate and have fun), • Results Driven (strong will to win; work to standard, not to time), • Kaizen (continuous improvement; embrace change; don't settle, share ideas)WE OFFER:, • Competitive pay, • Great benefits package, • Excellent growth opportunities, • Great work/life balance. Job Responsibilities:, • Work safely utilizing proper protective equipment and following all safety procedures. Maintain a clean and safe working environment., • Produce parts for assembly operations that require horizontal milled features, • Safely perform loading and unloading of material. Change tools and select required machine programs that ensure the quality and productivity., • Follow all manufacturing inventory control procedures and additional paperwork as required., • Learn other appropriate manufacturing job functions and serve as back up in other areas when required., • Assist with machine preventive maintenance using proper lock out/tag out procedures as required., • Meet or exceed productivity per company standards and document downtime and up-time data as required., • 2-5 years’ experience on a CNC horizontal mill or similar machine in a manufacturing environment. Experience with Elumatec and/or Emmegi is a plus., • Basic understanding of G-Code CNC programming, • Experience in a lean manufacturing or continuous improvement manufacturing environment is a plus., • Ability to accurately use and read tape measure, calipers and others as required., • Ability to read drawings and blueprints., • Attention to detail and when in doubt “Stop & Ask”., • Must pass background check as well as pre-employment physical and drug screen. Powered by JazzHR B3pLP5eXfh

Job DescriptionSalary: $150,000 - $195,000 Company and Role Summary The Lisbon Group is a learning organization that leverages our direct hands-on expertise across the project life cycle supported by our industry leading Engineering, EPC and Facility Operations Divisions to provide best-in-class solutions to help our clients overcome the challenges they face in energy and energy transition markets. We are looking for an innovative problem solver and driven Electrical, Instrumentation and Controls Manager (local candidates strongly preferred) who is motivated by helping customers find solutions to complex challenges. If you have a proven track record advising clients on making the right decisions for their projects and assets and are interested in gaining exposure in the energy transition sector (LNG, NGL, decarbonization, H2, ammonia, etc.) than this may be the right opportunity for you. This position is critical to our success and will require a true expert in this space. This role will report to the Managing Director and will be a pivotal part of the foundation of our growing team. This position can be based in Houston or Seattle office. What You Will Do • Serves as subject matter expert and ensures deliverables for electrical engineering function and team, • Lead, perform, and oversee specific project tasks and deliverables related to electrical engineering, • Provide guidance to electrical team in solving technical problems, • Provides project electrical design execution from conceptual design through design completion, • Develops Front-end Engineering Design (FEED) Packages, detailed design packages, electrical basis of design, one-line & three-line diagrams, load list, power studies (greenfield and brownfield), power integration and controls hierarchy philosophies and plans, • Prepares electrical equipment including packaged equipment specifications, datasheets, request for quote (RFQs), technical bid and purchase recommendations. Review vendor drawings, interface with suppliers, clients, internal engineering disciplines, • Applies expert knowledge of commonly used electrical concepts, practices, codes and standards within the electrical engineering services industry Minimum Qualifications • 8+ years related offshore and onshore upstream, midstream, and LNG experience, • Bachelors degree in electrical engineering or relevant technical and industry experience, • Previous engineering contracting experience required, • Previous supervisory experience highly preferred, • International project experience is a major plus, • Experience with Allen Bradley required and ESD system design, fire, and gas integration, • Experience developing and owning engineering reports, creating and documenting engineering calculations, summary reports and PowerPoint slide decks, • Must be available to travel internationally to site locations across the globe; <25% domestic and international, • Solid ability to follow projects from concept through execution, and continued operations, • Field work experience, • Strong written and verbal communication skills, • A proven ability to work both autonomously and as part of a team Whats In It for You? • Join us in making a difference today for a sustainable tomorrow!, • Direct access to the leaders of the company as you work to make important decisions on project and client strategies, • The ability to directly influence engineering standards, project success and project delivery, • Set a course for a career in the fast-growing energy transition sector: be a part of the growth of The Lisbon Group, build your brand and continued career growth in the Energy and Energy Transition Sectors, • Rare ability to support projects across their life cycle: end-to-end visibility from feasibility, execution and operations Current authorization to work within the United States is required. Immigration or work visa sponsorship will not be provided. Pay/Benefits • On-site (Seattle or Houston), • Competitive compensation, • 401(k) with company match, • Lisbon Group covers 100% of employee (employee only) insurance premiums for the following healthcare benefits: Health, Dental, Vision, Short-term and Long-term disability, Life Insurance, • Flexible schedule, • Optional Supplemental Life insurance, • Paid time off, • Parental leave Job Type: Full-time Schedule: Monday to Friday (though making self-available after hours when necessary) We'd love to speak to you if you think you'd be a good fit! Who We Are Our Mission is Simple We exceed customer expectations by providing exceptional engineering services and technologies. Located in Houston and the Pacific Northwest, we engineer fit-for-purpose solutions that maximize value. Our dedicated staff of industry leading professionals provide consistent customer-centric and market driven solutions. Were currently a privately held company. Our Values Global Expert. Trusted Partner. Its what we believe in as a business and as individuals. Our technical expertise and industry-specific knowledge, track record of successful delivery, flexibility and creativity are why our clients partner with us. And were looking for others who exemplify these qualities. EEO/AA Information Lisbon Group is an equal opportunity employer committed to workplace diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, gender identity, protected veterans status, status as a disabled individual or any other protected group status or non-job characteristic as directed by law.

Job Description THE ROLE We are looking for an OD/ID Grinder - 2nd Shift to join our team. The OD/ID Grinder - 2nd Shift will work with the coatings team and utilize a variety of grinding machines to prep and finish components to required customer and internal specifications. This role requires precision, mechanical aptitude, and the ability to interpret technical drawings and use measuring instruments. The ideal candidate will be experienced in grinding and/or machining, safety-conscious, and detail-oriented. ORGANIZATIONAL - Leadership & Organization • Strong attention to detail and commitment to producing high-quality work., • Good communication skills and ability to work both independently and in a team setting., • Adaptability to changing workloads and priorities., • Operate manual grinding machines to remove carbide, chrome, and steel coatings using rough and finish grinding techniques to tight tolerances (up to 0.0005")., • Read and interpret charts, drawings, blueprints, and scope of work documentation., • Determine product specifications and calculate dimensions and tolerances using mathematical skills and measuring instruments., • Use precision instruments including micrometers, calipers, and preset gauges to measure, examine, and test finished components., • Determine and monitor machine feed and speed and select abrasives appropriate to the material and desired finish., • Observe machinery operation and diagnose machine malfunctions; perform adjustments or notify maintenance as needed., • Lift, hoist, and position workpieces using cranes and other tools to safely load and unload machines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS OD/ID Grinder. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • Manual grinding experience in a fast-paced repair or machining environment strongly preferred., • This position will be based full-time in our Houston, TX Fusion facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Authorized to work in the United States. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description ROXBOX - Turning Steel Structures into Game-Changing Spaces As our MEP Design Engineer, you’ll be the systems thinker who ensures our modular builds perform as brilliantly in the real world as they look on paper. You’ll play a key role in bringing order to complexity and helping our teams deliver value without waste. You don’t just review plans — you solve problems, optimize systems, and make complex designs actually buildable. You speak architecture, engineering, and fabrication. You move comfortably between drawings and the real world. You’re energized by technical challenges, coordination puzzles, and bringing order to fast-moving projects. If that sounds like you, you might be our next MEP Design Engineer. ROXBOX is pushing the boundaries of modular construction, turning steel-framed and container-based structures into high-performance buildings. We’re looking for a hands-on, detail-obsessed MEP Design Engineer to support our design + production teams and tighten the loop between concept and fabrication. What You’ll Do: • Review, redline, and coordinate mechanical, electrical, and plumbing drawings for modular projects, • Translate client/architectural requirements into efficient, code-compliant engineered systems, • Work within Revit + Bluebeam (and occasionally jump into drafting) to clean up and clarify MEP deliverables, • Collaborate closely with internal design, estimating, and shop teams to eliminate gaps between design intent and production reality, • Provide technical input on value-engineering options and modular system best practices, • Support compliance reviews to ensure systems meet applicable building codes and performance standards, • Capture lessons learned from each project and feed improvements back into our design standards and workflows., • Act as the bridge between architects, engineers, and fabricators — translating requirements into clear, buildable solutions.What Makes You a Strong Fit:, • 5+ years of MEP design experience in building systems engineering, • Bachelor’s degree in Electrical or Mechanical Engineering (or related discipline); Mechanical background with strong electrical knowledge considered., • Familiarity with plumbing and electrical systems and working knowledge of HVAC fundamentals., • Strong focus on manufacturability — able to bridge design intent and production reality., • Proficient in Revit and Bluebeam, with excellent technical documentation skills., • Experience in design-build or modular/prefab environments is a strong plus., • Ability to self-direct, own deliverables, and proactively flag issues., • Thrives in collaborative problem-solving environments and enjoys improving processes project by project.Compensation & Details:, • Base salary range: $90,000-$110,000 DOE, • Full-time position with medical, dental, vision, and PTO benefits, • On-site in Houston, TX (77041), • Reports to: Principal Architect, while collaborating with the Production and Quality Manager to ensure tight coordination between design and build., • Work on innovative modular construction projects across diverse industries, • Join a tight-knit, technical team that values precision and ideas, • Make a real impact in a role where engineering decisions directly affect buildability, • Help shape the future of off-site, design-build constructionHow to Apply:, • Submit your resume and brief cover letter. In your cover letter, please include:, • The most satisfying system you’ve ever designed or worked on, and why., • One process improvement you’ve made (or would make) in how MEP systems are coordinated on modular or design-build projects.

Job Description Responsibilities • Draft sketches, piping and instrument diagrams, or model 3D equipment items for power plant systems includingsteam cycle systems, boiler feed and condensate, water treatment, fuel handling, hydraulic, heat transfer systems,conveying systems, and air and gas systems., • Check design deliverables in accordance with industry codes and standards, contract requirements, andcompany standards., • Adhere to schedules and work assignments to ensure successful project completion., • Coordinate with other drafters, designers and other team members assigned to a project or task, and supportwork progress and results., • Train and advise interns or new graduates Qualifications • At least 3+ years’ related design experience, • Bachelor’s degree in Drafting and Design or related discipline, • Proficient in basic computer programs including MS Word and Excel, web browsing and e-mail programs

Job DescriptionØ Support project engineers and managers in the analysis of technical problems and find sound engineering solutions. Ø Be a part of the team towards preparation of feasibility and conceptual studies, FEED works, permit engineering, QRA, basic and detailed engineering, draw equipment specifications, prepare estimates and evaluate vendor / contractors’ offers. Ø Develop technical proposals, prepare engineering documents and vendor specifications, prepare estimates, evaluate and manage costs as well as a schedule of tasks in close coordination with the clusters to optimize costs, processes and quality. Also review existing specifications and develop new technical specification as may be required to stay abreast with the new technological developments.Ø Coordinate and interact with the different stakeholders about project reviews, technical analysis and peer reviews. Also participate in HAZOP and other engineering studies.Ø Participate in system/equipment problem solving; investigating operating deficiencies/inefficiencies and providing recommendations for modifications to physical setup or operating procedures to improve the reliability and production efficiency of the equipment or system.Ø Responsible for cost overview updates on schedule and capex spending. Ø Responsible for regular progress and budget overview reporting to management. Ø Support maintenance activities. Ø Capable of developing structured plans to achieve objectives effectively and efficiently. Ø Teamwork - Strong ability to work in diverse team settings and contribute to shared goals Ø Troubleshooting - Proficient in diagnosing issues and implementing effective solutions. Ø Initiative - Demonstrates self-motivation and the ability to drive projects forward with minimal supervision. Ø Technical Professional Knowledge - In-depth knowledge of industry-relevant technical standards and practices. Ø Individual Leadership - Ability to lead and advocate for engineering outcomes that are practical and aligned with business goals.Ø AutoCAD knowledge - Strong working knowledge of AutoCAD or similar design software Ø Open mindedness and positive attitude, embraces diverse perspectives and maintains a positive attitude under varying circumstances.Ø Excellent written and verbal communication skills, ensuring clarity and impact. Ø Team-player, patient and confident. Ø Demonstrates strong negotiation skills to reach mutually beneficial outcomes. Ø Understanding of the financial and operational impacts of engineering decisions. Ø Ability to lead towards engineering solutions that are fit for purpose. Ø Comprehensive understanding of terminal operations, including HSSE (Health, Safety, Security, and Environment) requirements. QUALIFICATIONS / REQUIREMENTSv Bachelor’s degree in Process or Chemical Engineering. v 5 to 8+ years of hands-on experience in the design and construction of LNG, ammonia, LPG, and/or chemical storage terminals.v Familiarity with applicable U.S. codes and standards is essential. v Proven experience with refrigerated and cryogenic fluids, including chemicals, gases, and hydrocarbons such as butane, propane, propylene, LNG, and ammonia. Knowledge of hydrogen handling is a plus. v Demonstrated ability to manage projects effectively, ensuring timely and budget-conscious delivery. E04JI800n8pv407l4xd

PrideStaff - 554781 [Material Handler / Freight Handler] As a Warehouse Packer at PrideStaff, you'll: Provide support for the operation team by working safely to feed material into machines, inspect products for defects and pack finished goods in the correct configuration; Notify the Supervisor of q

Job Description Job Title: Horse Groom in Kentucky *This job is in Lexington, Kentucky at some of the finest Thoroughbred Horse Farms in the world. *Relocation Package available. Looking for a physically rewarding job with growth and training? Work with Elite Horses in the Heart of Kentucky. We’re looking for tough, reliable, hands-on individuals to join some of the most prestigious thoroughbred horse farms in the world. Whether you’re a ranch hand, stable worker, horse rider, or just someone who’s grown up around animals and farm life — this is your shot at doing meaningful work in a unique and respected industry. About the Job: Step onto a top-tier horse farm where every day brings something new. From feeding and grooming champion horses to working alongside skilled vets and trainers, you’ll be part of a tight-knit team doing real, physical work that matters. This is a physically demanding role, and we are seeking strong, capable individuals who can meet the physical requirements of the job. What You’ll Do: • Feed, groom, and care for high-value horses, • Clean stalls and maintain barn and farm areas, • Walk and exercise horses, assist with veterinary care, • Help out with foaling, breeding, and training (depending on experience), • Handle general ranch tasks and support the daily running of a world-class operation Why This Is Different: • Learn from the best: You’ll work side-by-side with top professionals and get real insight into elite horse care and training., • Feel the pride: These farms are home to champions — your work directly contributes to that legacy., • Be part of a team: Join hardworking individuals who respect effort, reliability, and grit. What We’re Looking For: • You must have previous experience working with horses, • Comfortable and confident around horses and large animals, • Physically strong, dependable, and ready to work outdoors in all conditions, • Strong team player with solid work ethic and can-do attitude Interested? Here’s What to Do: Upload your CV today — we’re filling roles fast, and we’ll walk you through the entire process. Take the leap and do work you can be proud of. Benefits What You’ll Get: • Pay: $16–17/hour, • Hours: Minimum 48 hours/week, • A chance to build a future in a respected and specialized industry

Job Description The Groundsperson supports the crew by performing work from the ground including clearing brush and trees as directed, and performing clean-up on each job site. ESSENTIAL FUNCTIONS • Always follow and help enforce safe practices and rules, • Keep work area clear of debris, • Work from the ground and clear undergrowth from right-of-way by using handsaws, pole saws and pruners, hand pruners, loppers and gas-powered chain saws to cut brush and trees, • Load and unload trucks with logs, brush and debris; feed brush into brush chipper, • Use hand lines to lower limbs and equipment, • Perform general clean-up of job sites following completion of work, • Carry, prepare, and store materials, tools and equipment at work site, • Set up and break down road signs as directed, • Flag traffic to protect employees and the public from potential harm or injury, • Drive truck or operate other equipment as assigned, • Perform basic maintenance service on trucks and equipment; keep trucks and other assigned equipment in neat and orderly fashion; report the need for major repairs to truck and equipment to Foreperson, • Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Groundspersons have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES • Must possess physical strength and balance to drag heavy limbs, use chain saw and pruners in uneven terrain, • Must be able to work outdoors under varying and sometimes adverse weather conditions, • Must be able to hear verbal instructions from a distance, • Must be able to obtain and maintain first-aid certification and CPR, • Must be able to wear necessary personal protective equipment (PPE), • Must have and maintain a Driver’s License if hired for a driving position, • Must be able to comprehend verbal job instructions/information, • Must be able to maintain balance over uneven terrain, • Must be able to communicate with others, • Must have endurance necessary to perform duties throughout a standard eight or ten hour day, • Must be able to operate and service all required tools and equipment, • Must be able to travel out of town for storm restoration work when needed This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description Monarch Landscape Management is hiring Tree Care Groundsmen to support our Arbor Division. Groundsmen work on the ground to assist climbers and equipment operators with brush handling, debris removal, rigging support, and worksite safety. This position is ideal for individuals seeking hands-on work in arboriculture and offers clear pathways into climbing, equipment operation, PHC, or crew leadership roles. Compensation: $17 - $21 hourly Responsibilities: • Drag brush, feed the chipper, and support jobsite cleanup, • Use hand tools, blowers, and other ground-based equipment, • Set up safe and organized work zones with cones and signage, • Communicate effectively with climbers and crew leaders, • Follow all safety procedures and wear required PPE, • Participate in daily safety briefings and hazard assessmentsQualifications:, • Strong work ethic and willingness to learn, • Ability to lift 50+ lbs and work outdoors in all weather conditions, • Good communication and teamwork skills, • Prior landscaping or tree care experience is a plus (not required for entry-level)About Company Are you looking for a landscaping career in Houston where you feel satisfied and appreciated? Are you looking for a workplace with a positive environment where you can learn and grow? We understand that making career changes can be uncomfortable and that you may have had some really bad experiences in the past. You deserve a career where you feel supported by your team, see opportunities for growth, and are compensated well for what you do. After all, you spend the majority of your time at work! Finding a stable landscaping job in Houston, and one you truly enjoy, matters. With a growing team of over 160 members, how our team members feel at the end of the day is important to us. It’s also why we were voted one of the Top Workplaces in Houston in 2021, 2022, and 2023. • Competitive pay based on experience, • Company vehicle and tools provided, • Opportunities for advancement and certifications, • Health benefits, paid time off, and holiday pay

Mary Lee Foundation is looking for Direct Support Professionals to provide person-centered care tailored to meet the needs of individuals with intellectual and developmental disabilities. You'll make a difference in the lives of people with disabilities while receiving a great opportunity for professional growth. Some things you will find yourself doing in this position: • Assisting clients with daily personal tasks, including bathing and dressing, • Completing housekeeping tasks such as vacuuming, washing dishes and tidying, • Helping plan client appointments and organize a schedule, • Organizing with transportation arrangements to appointments, • Shopping for groceries and preparing meals that meet specific client dietary needs, • Generous Paid Time Off (PTO), • Career Growth Opportunities with paid training, • Insurance Options (Medical, Vision,) for all Full-Time employees, • Company paid Dental Insurance and Life Insurance for all Full-Time employees, • Paid Orientation, • Referral program, • Student Loan Forgiveness after 10 years of service, • High School Diploma or GED OR equivalent, • Required to pass background check, • Valid driver's license [Required], • Must attend a four (4) day orientation (occurs 8a-5p Mon-Fri), • Willing to drive a large passenger van [required], • Able to lift 50 pounds 1. Why you might love this job Caregiving is the job for you if you want to make a real difference in people’s lives during a difficult time. You’ll build relationships with your clients, their families as you work in their home, and your coworkers as you spend more time providing care and communicating your client’s condition with other members of your client’s care team (e.g., nurses, doctors, etc.) Over time, you’ll learn what clients you work best with, where you prefer to work (home vs. facility), and your work hours. As you share them with our team in the office, we’ll match you with shifts that best match your preferences. 2. Why you might hate this job You will be responsible for the health, safety, and happiness of your client, which is a big deal. There will be days when you may have to accept a last-minute shift that is far from your home, or with a client who isn’t feeling good and happy. Family members often care deeply about the care we provide and can have their own ideas for what that care should look like, and that can lead to pressure and stress for you. We (in the office) get stressed out too, and may not be able to explain everything, every time. You’ll need to work both independently and with other team members (like the nurse, the shift scheduler), which may be frustrating at times. 3. What a regular day looks like Depending on your client’s specific health condition, you can expect to bathe, feed, and dress them every time you visit. You’ll learn your client’s preferences and quirks and possibly know them better than their own family members. For some clients, your day might include taking them on activities and driving them to doctors’ appointments, go grocery shopping or run errands. As part of your shift, we’ll also ask you to keep track and write down how your client is doing. You have to let us know if any significant changes are happening with the client’s health and life situation. 4. What we need in order to interview you Because of the clients we serve, we require at least a high school education and 1 year of experience as a caregiver. We’ll ask for three references from people who have worked with you, and can speak to your abilities. Please have these references handy so we can spend more time getting to know you, and less time chasing down documents/references. Because we are a DADS-regulated facility we will also need you to have a clean background free of convictions which would bar your employment per Health and Safety Code Ch. 250 (mostly offenses involving exploitation, neglect, and abuse of another person). 5. What would make you stand out to our team We hired a variety of caregivers who are all motivated by the desire to take care of our clients and do the best job they can for them. What this means is we will help you come prepared. Prepared caregivers have their documents, references, and schedules ready to go. We value both your time and ours and want to make sure you get an answer from us as soon as possible. We look forward to learning more about you and possibly welcoming you to the team! About Us: Mary Lee Foundation is a 501(c)(3) nonprofit organization dedicated to providing diverse services and housing to adults with various types of disabilities. Founded in 1963 by Charlene Crump, Mary Lee Foundation inspires and involves persons with disabilities through programs, advocacy, and education. Today, the Mary Lee Foundation is as strong as ever, continually adding or expanding new programs and services, and expanding our reach to the disabled across our nation. We are a community of people from all walks of life with the passion to help the less fortunate and to provide care and compassion to all we serve. We are located at 1339 Lamar Square on South Lamar in Austin Tx. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, sexual orientation, gender identity or expression, genetic information, disability, veteran status, sex or age or any other legally protected status.

Job Description As an Electrical Engineer, you’ll lead the design and optimization of electrical systems that power essential infrastructure—pipelines, compressor stations, and storage facilities. You’ll apply your technical expertise to integrate advanced technologies like automation, real-time monitoring, and energy storage, driving efficiency and innovation across operations. A key part of your role is ensuring safety through the implementation of arc flash mitigation, fault detection systems, and rigorous compliance with regulatory and environmental standards. You’ll also manage complex projects from concept to completion, aligning engineering solutions with business goals and timelines. This is a high-impact role where your leadership and problem-solving skills will directly contribute to operational reliability, safety, and strategic growth. Your work will challenge you, and with our Core Values to guide you, you’ll quickly learn and grow with us. Responsibilities/Expectations: • Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities, • Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs, • Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infrastructure reliability, • Provides technical expertise in power distribution, electrical schematics, and system layouts for both new construction and upgrades to existing facilities, • Manages complex engineering projects from concept to completion ensuring alignment with business goals timelines and budget constraints, • Ensures compliance with all relevant safety, environmental and regulatory standards across electrical systems and project execution, • Collaborates with cross-functional teams to deliver engineering solutions that meet internal and external customer needs, • Required: Bachelor’s degree in electrical engineering and eight (4) years engineering experience in natural gas, data centers or related industry, • Preferred: PE License, • Demonstrates excellent organizational/interpersonal skills and safety as a main priority, • Proficiency in Microsoft Office Application and PC skills?, • Proficiency in reviewing arc flash studies and implementing improvements, • Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.)?, • Preferred: Experience with PLCs?, • Preferred: Project Management experience?, • ?Preferred: Experience working in Preliminary-Front End Engineering and Design (Pre-FEED), Front End Engineering Design (FEED), or Engineering, Procurement, Construction (EPC) of small to medium facility projects, • Preferred: Proficiency in designing, and implementing, Instrumentation systems, including Programmable Logic Controllers (PLC) and Human Machine Interface (HMI) systems&