Fire safety jobs in San Diego, California - Page 3Create job alerts

Be part of an amazing story \n Macy’s is more than just a store. We’re a story. One that’s captured the hearts and minds of America for more than 160 years. A story about innovations and traditions…about inspiring stores and irresistible products…about the excitement of the Macy’s 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We’ve been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. \n Job Overview \n The Maintenance Engineer II maintains the physical structure and equipment of the store, ensuring they remain in good working order. Responsibilities include performing preventative maintenance as well as emergency, corrective, and routine repairs on electrical, mechanical, fire/life safety, plumbing, and HVAC systems. \n Full-time colleagues are typically scheduled to work 30 or more hours per week, while part-time colleagues are typically scheduled 12-24 hours per week. Hours are dependent on business needs and colleague availability. Information regarding hours per week needed for benefit eligibility purposes can be found here. \n What We Can Offer You \n\n • Maintain HVAC, electrical, mechanical, plumbing, and fire/life safety systems, along with associated equipment, to maximize efficiency.\n, • Perform emergency, corrective, and routine repairs on HVAC, electrical, mechanical, plumbing, and fire/life safety systems, ensuring optimal functionality.\n, • Conduct preventive maintenance on equipment and systems according to the established schedule.\n, • Keep accurate records of all inspections, preventive maintenance, and repairs to ensure compliance with state and federal regulations, as well as local fire marshal requirements.\n, • Maintain EPA Universal Certification and stay updated on all relevant legislation, including EPA regulations and South Coast Air Quality District regulations related to “CFC” and refrigerant handling laws.\n, • Follow shortage control programs and procedures.\n, • Demonstrate consistent attendance and punctuality.\n, • In addition to the essential duties mentioned above, other duties may be assigned.\n, • This position requires heavy lifting, constant moving, remaining in a stationary position, and reaching with arms and hands. \n, • Involves remaining in a stationary position for at least two consecutive hours, lifting at least 50 lbs. stooping, kneeling, crouching, and climbing ladders\n, • May involve reaching above eye level\n, • Requires close vision, color vision, depth perception, and focus adjustment\n, • Able to work a flexible schedule, including days, evenings, weekends, holidays, and during emergency situations, based on department and company needs\n, • Merchandise discounts\n, • Performance-based incentives\n, • Annual merit review\n \n \n This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to an inclusive work environment. \n \n \n STORES00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at macysJOBS.com.

Epsilon Systems Solutions, has a contingent job opportunity for a full-time Habitability Electrician II in San Diego, CA Summary: The position will provide maintenance and technical support to the customer. Provides technical support of shipboard habitability related electrical systems and components as a subject matter expert. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) that contain information required to accomplish work. This position will be under limited supervision. Duties and Responsibilities: Provides technical support on Shipboard Electrical Systems as a subject matter expert. Assesses, troubleshoots, and assists ships' force in the performance of minor repairs, adjustments, and testing on shipboard habitability systems and equipment. Shipboard habitability systems and equipment include: Galley and food service equipment Food service refrigeration equipment Food preparation equipment Food service dishwashers and garbage grinders Aqueous potassium carbonate (APC) fire-fighting system Gaylord system Laundry equipment Fan coil units/assemblies Uses technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) to complete work. Performs functional checks, tests and analysis, fault detection, and formulates required corrective actions. Completes assessments and maintenance actions that may include but are not limited to: repairing or replacing wiring, fixing equipment and fixtures by using hand tools or power tools. Tests electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system. Connects wires to circuit breakers, transformers, or other components. Diagnoses malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem. Conducts research and provides drawings, technical manual information, design specifications, and engineering technical recommendations. Assists ships force with obtaining supply and repair parts information as required. Performs the necessary out briefs to ship's force representatives including ship's officers and supporting personnel as well as briefs to customer management. Conducts pre and post repair tests or experiments. Analyzes results and redesigns or modifies equipment to improve performance, then reports results. Required Qualifications: High School Diploma or equivalent Minimum 4 years' experience repairing, upgrading and performing condition assessments, performing diagnostic inspections and fault isolation on a variety of Navy shipboard electrical systems; including but not limited to ship power distribution systems, equipment control systems, electrical operators, indicating and order systems, lighting distribution systems, motors, controllers and generator Ability to read, interpret, and follow detailed written instructions, or drawings and to conduct activities in a safe manner Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations Ability to obtain and maintain a DOD security clearance/CAC Preferred Qualifications: Naval shipboard electrical experience preferred Pay Range: The pay range for this role is $26.07 - $47.79 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notations: Requires walking, reaching, sitting and concentration in the presence of occasional noise Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships) Ability to lift, carry and move objects up to 50 lbs. in weight Ability to see details at close range (within a few feet of the observer) Office, warehouse, laboratory, pier side, shipboard Noise conditions range from very quiet to loud noise Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job DescriptionSalary: $25 Hourly Concierge / Security Guard Revive Pathway is a Tribally owned clinic that treats a diverse population of patients, including Native and Non-Native people. We have the opportunity to provide whole person care, while managing patient substance use disorders, primary care, infectious disease, and mental health needs. We are building a team of dedicated and compassionate individuals. Revive Pathway brings an innovative model of highly individualized, compassionate care to patients with opioid use disorder. From the moment someone walks through the door of our state-of-the-art outpatient facility, they will encounter our thoughtfulness and intention for a humanizing and respectful experience with us. The comforting and safe setting of our nature-inspired facility and the friendly, professional attitude of our staff help to define our journey with each patientand with each otherfrom day one. Each employee at Revive Pathway creates their own ripple effect in the larger circles of the families and communities that we touch. Are you ready to make a difference with us? We are currently seeking a Concierge / Security Guard to support our clinic in El Cajon, CA. This position, reporting to the Clinic Director, is an excellent opportunity for someone excited to make an immediate and lasting impact in a growing company. Position Overview: At Revive Pathway, the safety of our patients and our community is our top priority. As a Security Guard / Concierge at the clinic, your role will be essential to this mission. On a daily basis, the Concierge will be the first person to interact with patients, visitors, and neighboring businesses. The Concierge position requires a strong skillset including excellent customer service, professionalism, and maintaining a calm but directive presence in dealing with potential crisis situations or when defusing escalated patients. The Concierge will maintain a visible presence and regularly patrol the exterior of the building and property as well as the patient lobby and interior areas. Revive Pathway is a place for teamwork and for healing our community. We are looking for candidates who want to make a difference and who can demonstrate compassion and empathy just as easily as they can keep calm and order. Primary Duties: • Patrol the property, enforce clinic policy and regulations., • Ensure that the patients, staff, and visitors are provided with a safe and professional working environment., • Maintain visibility and observe and report possible unusual activity., • Assist with and immediately report any maintenance and safety conditions that might endanger patients, staff, or public safety, including fires, evacuations, hazardous situations, or other visitor-related events; provide back-up to patients and staff as needed., • Maintain all daily assigned equipment in functional and presentable condition., • Respond to requests for assistance by program staff and various patient requests., • Complete any required documentation including any facility or other Incident Reports and submit to the Clinic Director., • Report any security-related accidents/incidents and complaints; complete report and follow up with management as needed., • Responsible for ensuring that all employees, suppliers, and visitors on clinic property have proper company-issued identification., • Responsibilities include crowd control and assisting Police Department, Fire Department, EMS, or other officials as requested., • Assist with patient check in and front office coverage as needed., • Perform other related duties as required. Minimum Requirements: • High School Diploma, • Security experience preferred (having both private and public sector is a plus)., • Language: English - Spanish is a plus, • Must be able and willing to work with minimal supervision., • Basic computer skills., • Professionalism in appearance, work ethic, and positive attitude., • Valid driver's license., • Ability to work the hours and days required by position, including daily 5:30 am start times., • Ability to provide health and TB clearance., • Must pass background check and urine drug screen. Skills & Abilities: • Passion for working with people, even on tough days., • Ability to treat each individual like they are the only person in the room., • Good listener, • Welcoming of differences and diversity., • Ability to work independently and also to thrive as part of a team., • Ability to take direction and receive constructive feedback., • Power to stay calm, focused, and kind in stressful situations., • Organized and detail oriented., • Reliable, • Flexibility, versatility, and willingness to jump into new situations and challenges., • Humility, • Willingness to share your opinion., • Courage to stand up for your beliefs., • Ability to help create a safe environment for patients and staff. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this classification. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently required to stand, walk, sit, stoop, kneel, bend, use hands to keyboard or type, handle materials used in performing the essential functions of the classification, reach with hands and arms, climb stairs, ramps, or ladders occasionally during shift, stand or walk on various surfaces for long periods of time, ability and willingness to occasionally stand in a static position for extended periods. The employee will be asked to perform repetitive behaviors (e.g., typing and data entry). The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this classification include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Sufficient clarity of speech and hearing abilities required by this classification includes those which permit the employee to discern verbal instructions and communicate effectively in person and by telephone. The employee must be able to identify potentially unsafe situations and address using verbal and non-verbal communication. While performing the duties of this classification, the employee works in both indoor office and outdoor settings where the noise level is usually moderate but could potentially be high levels at times. The employee must analyze and evaluate situations and adopt effective courses of action. Extensive use of the telephones/radios and face-to-face communication that requires accurate perception of speech as well as talking and hearing. Why Work for Us? At Revive Pathway, we share a journeywith patients, our coworkers, and the many communities of which we are a part. Our work is to build connection with individuals and families and to save lives in the process. The word revive is defined as restoration, regaining life, renewal, and flourishing again. These concepts are central to our identity and our vision. The actions and intentions of our team are rooted in Compassion, Growth, and Respect as we meet patients on their Pathway. We support our team through a competitive salary and benefits package and opportunities for continuing education and professional advancement. Revive Pathway staff will also be cross trained to meet the needs of patients and to make each day a success. On-the-job training will empower team members, as we believe the excellence of the clinic and the professional development of our staff complement one another. Please visit for more information.

Job Description About Us We are a fast-growing commercial general contractor specializing in high-end retail Commercial Tenant Improvement (TI) and ground-up projects across the country. We take pride in delivering top-quality craftsmanship, efficient project execution, and outstanding customer service. Our expertise includes luxury retail, boutique retail stores, and high-profile commercial spaces where precision and exceptional finish quality are paramount. Job Summary Our client is seeking an experienced Traveling Superintendent to manage Commercial TI and ground-up projects nationwide, with a special emphasis on luxury retail, high-end retail, boutique retail stores, and similar commercial projects. This role requires strong leadership to oversee subcontractors, enforce safety and quality standards, maintain schedules, and coordinate seamlessly with project stakeholders. The ideal candidate is organized, detail-oriented, and thrives in a fast-paced, demanding construction environment. Extensive travel is required for this position. Key Responsibilities * Oversee and manage subcontractors to ensure high-quality, precise work, especially for luxury and high-end retail finishes * Manage daily on-site operations, ensuring projects remain on schedule and within budget * Review and interpret construction plans, specifications, and detailed schedules * Coordinate daily activities with the client’s team to ensure smooth project execution and adherence to brand standards * Conduct jurisdictional inspections, including those by local building officials, health departments, fire departments, special inspections, and owner walkthroughs * Maintain detailed project schedules and enforce compliance with safety protocols, including LOTO (Lockout/Tagout) procedures * Oversee final inspections and ensure completion of all certifications necessary for occupancy * Track and manage project financials, including general contractor costs, change requests, and budget adherence * Assist the Project Manager in compiling closeout documentation, such as as-builts, warranty information, and OEM manuals * Conduct and document weekly on-site safety meetings to ensure strict adherence to safety standards * Complete daily logs accurately by the end of each business day * Review all submittals and manage the punch list to ensure flawless project completion * Coordinate owner-supplied vendors and equipment to support seamless project execution Qualifications & Desired Education * 5+ years as a Superintendent * Strong computer skills and ability to manage detailed paperwork and reporting * Proven ability to read and interpret construction plans, specifications, and submittals with precision * Previous experience working on luxury retail, high-end retail, boutique retail stores, or comparable high-detail commercial projects is highly desirable • Familiarity with CM Software experience: Procore, Bluebeam, MS Project, etc. Experience with wood framing in retail construction is a plus * Excellent communication, problem-solving, and interpersonal skills * Strong understanding of building systems, including Architectural, MEP, and finish coordination * Highly motivated, with excellent organizational, leadership, and customer service skills * Relevant industry certifications and training should be included in applications Compensation & Benefits * Competitive salary based on experience and project expertise * Car allowance * Fuel card for company travel * Company-provided laptop and phone * Comprehensive medical, dental, vision, and 401(k) benefits * Paid vacation and sick leave

Job DescriptionDescription: Kitchens for Good POSITION TITLE: Facilities and Kitchen Support Assistant REPORTS TO: Facilities and Logistics Manager FLSA STATUS: Non-exempt COMPENSATION: $20.00-$25.00 LOCATION: DOH San Diego, CA Who we are: Kitchens for Good transforms lives through culinary arts. Position Summary: The Facilities and Kitchen Support Assistant is a hands-on role responsible for maintaining the cleanliness, safety, and functionality of our culinary training spaces, facilities, and vehicles. This position supports daily operations by assisting with deliveries, kitchen setup, equipment maintenance, and ensuring a safe and organized environment for staff, students, and guests. Essential Functions & Responsibilities: Facilities Support • Perform routine maintenance and minor repairs across the facility., • Set up and break down classrooms, event spaces, and workstations., • Assist with kitchen setup and breakdown for classes, events, and meal production., • Support inventory management, including receiving, storing, and rotating food and supplies., • Conduct Vehicle Pre-Inspection, • Safely operate company vehicles to transport food, supplies, and equipment between locations., • Load and unload deliveries using proper lifting techniques., • Conduct regular safety checks in kitchen and facility areas., • Promote and model safe work practices, including proper lifting, food handling, and chemical storage., • Report and help resolve safety hazards or incidents promptly., • Other duties as assigned, • Conduct weekly log checks at each location including-DOH, YTC, and EMJDF to ensure contract compliance is being observed, • Opening Checklist, • Closing Checklist, • Temperature logs, • Sharps inventory, • Assist each location with Monthly Inventory, • Safely operate company vehicles to transport food, supplies, and equipment between locations., • Load and unload deliveries using proper lifting techniques., • Maintain delivery logs and report vehicle maintenance needs. Competencies: • Collaboration Skills, • Customer/Client Focus, • Flexibility, • Stress Management/Composure, • Excellent Communication Work Environment: This job operates in a kitchen environment, housed with equipment such as an oven, stove, dishwasher, slicer, coffee machine, steamer, mixer and chef’s knives. The employee is frequently exposed to heat, colder than normal temperatures, steam, fire and noise. Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to stand for extended periods of time, sit, reach, lift, bend, kneel, stoop, climb, push, and pull items weighing 50 pounds or less. The position requires manual dexterity, auditory and visual skills, and the ability to follow written and oral instructions and procedures. Position Type/Expected Hours of Work This is a full-time position, non-exempt position scheduled at 40 hours a week. Includes weekends and holidays as needed. Travel: Delivery routes include Kitchens for Good sites, Youth Transition Center, and East Mesa Juvenile Detention Center. Other routes as assigned by manager. Background checks: Must undergo Criminal background clearance through the Probation (backgrounds), State of California Department of Justice (DOJ) and Federal Bureau of Investigation (FBI). Drug screen and Tuberculosis Testing. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits • Medical, dental, and vision coverage, • 403(b) retirement savings, • Professional development budget, • 13 paid holidays, • Generous PTO Plan, • Group term life insurance Compensation Transparency At Kitchens for Good, we are committed to pay transparency and equity. The base salary range for this position is provided to ensure clarity and fairness in our hiring process. The final salary offered will be determined based on a variety of factors, including your education, relevant experience, skills, and knowledge. We also take into account internal equity to ensure consistency and fairness across our team. Please note that the listed range reflects the full salary potential for the role. Offers at the top of the range are not typical, as we aim to support long-term growth and advancement within the organization. Acknowledgment Qualified individuals must be able to perform the essential duties of the position with or without accommodation. A qualified person with a disability may request a modification or adjustment to the job or work environment in order to meet the physical requirements of the position. Kitchens for Good will attempt to satisfy requests as long as the accommodation needed is reasonable and no undue hardship would result. AT-WILL:The individual hired in this role will be at-will and will be subject to termination by the employee or the Company, with or without cause, with or without notice, and at any time. AMERICANS WITH DISABILITIES ACT (ADA) STATEMENT The Company will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please contact Juanita Atitsogbuie at 619-736-1873 or?. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. EQUAL EMPLOYMENT OPPORTUNITY (EEO) STATEMENT The Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender or gender identity, national origin, disability status, protected veteran status or any other characteristic protected by state or federal law. Requirements: Education and Work Experience: • Minimum high graduate or equivalent, • At least 3 years of related experience, • Basic knowledge of building systems, tools, and equipment handling, • Ability to lift up to 50 lbs. and perform physically demanding tasks., • Experience in facilities, kitchen, or warehouse support is preferred., • Familiarity with food safety and sanitation practices is a plus., • Working knowledge of various computer software programs (MS Office, etc.), • Food handlers (or willing to obtain one upon hire which will be scheduled and paid for by the organization) Additional Requirements: • Valid driver’s license, • At least 21 years of age, • Ability to operate vehicles in a variety of weather and traffic conditions, • Good driving record with no traffic violations Must undergo Criminal background clearance through the Probation (backgrounds), State of California Department of Justice (DOJ) and Federal Bureau of Investigation (FBI). Drug screen and Tuberculosis Testing.

Manages disruptive persons professionally with a minimum use of force; controls access to restricted and security sensitive areas; responds to fire/security alarm activations, assumes scene command in emergency situations; observes and reports safety hazards, gives direction and assistance to Sharp

Job DescriptionOverview Company Overview: Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Job Description Pay Rate $20.59/hour Rancho Bernardo location On call officer, no guaranteed hours Allied Universal® is hiring a Security Professional - Unarmed. The Security Professional will conduct unarmed foot and/or vehicle patrol (interior and/or exterior) in a hospital environment. Additional duties include control access and egress; monitor CCTV and alarm systems; compose reports; deter criminal activity and misconduct. Due to the safety sensitive nature of this role, qualified candidates must be able to submit to drug screening to the extent permissible by law. This assignment is in a healthcare facility. As such, a tuberculosis (TB) test and certain vaccinations may be required. RESPONSIBILITIES: • Perform security patrols of hospital grounds on foot or in vehicle; document detailed observations of unusual conditions that may create security concerns or safety hazards, • Assist hospital staff with de-escalation of situations involving patients; restrain combative individuals as necessary (within company and customer guidelines), • Transport patients to the morgue, as needed, • Assist in escorting patients from helicopter pad (high elevation) to the emergency room, • Assist with evacuations during fires, medical emergencies, and natural disasters, • Sound alarms or call police or fire department in case of fire or presence of unauthorized persons, • Warn violators of rule infractions, such as loitering, smoking, or carrying forbidden articles, • Permit authorized persons to enter property and monitor entrances and exits; ensure only authorized individuals enter and exit the hospital, and that no contraband or hospital items are brought in or out, • Observe departing personnel to protect against theft of company property and ensures that authorized removal of property is conducted within appropriate client requirements, • Active Califonria guard card, • High school diploma or equivalent, • Current driver's license if driving a company- or customer-owned vehicle, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Minimum of two (2) years of verifiable employment history relating customer service or the protective service industry (preferably security, healthcare, military, law enforcement, or corrections), • Must be at least 18 years of age, or higher if required by the state, • Able to operate radio or telephone equipment and/or console monitors, • Demonstrated ability to interact cordially and communicate with the public, • Effective oral and written communication skills, • Problem solving skills, • Active listening skills, • Ability to assess and evaluate situations effectively; identify critical issues quickly and accurately, • Able to mediate conflict with tact, diplomacy, • Write informatively, clearly, and accurately, • Service in Military Occupational Specialty related to law enforcement, security (such as Military Police, Elite Military Forces, combat arms) or any support role in a Combat Zone, • Graduate of a Certified Public Safety Academy (military or civilian) or verified work experience in the law enforcement, adult corrections, or firefighter field, • Bachelor's degree in law enforcement or criminal justice related studies, • A minimum of 8 or more years of service in any military branch, • Health insurance and 401k plans for full-time positions, • Schedules that fit with your personal life goals, • Ongoing paid training programs and career growth opportunities If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1451710

Job Description We are seeking an experienced Fire TI Foreman to lead our on-site team in installing fire and life safety systems in commercial properties. As the main point of contact for the Project Manager, contractors, and clients, you will be responsible for a project's successful execution, from start to finish. We are looking for a hands-on leader who can manage all aspects of the installation, including: • Supervising a team of technicians., • Directing daily project activities and setting team goals., • Managing project timelines and client expectations., • Coordinating with third-party contractors., • Ensuring on-site safety and proper data management., • Training technicians and handling personnel issues. Schedule: • 6:00 AM - 2:30 PM, Monday through Friday. Hours may vary., • 5+ years installing low voltage fire alarm systems in a commercial environment, • Fire/Life Safety MFG Systems certifications, • High school diploma (or equivalent), • Valid California Driver License and proof of auto insurance., • Ability to drive for 2+ hours in a work shift/day, daily., • Ability to drive, walk, bend, stoop, hear, and speak, daily., • Ability to work in indoor and outdoor environments, under all temperature variations., • Work environment may be construction sites, commercial buildings, and multi-tenant properties., • Ascend/Descend and work at heights above 6ft and extreme heights, occasionally, • Move/Transport/Install/Remove items weighing 50+ pounds, daily, • Pushing/Pulling using upper extremities, daily, • Comprehensive Benefits Package: Medical insurance, dental insurance, life insurance, 401k plan, paid holidays, Paid Time Off, • Employee Merit and Longevity Awards: Merit rewards that you can use to get items such as branded apparel, video game consoles, headphones and more and longevity awards like golfing gear, purses, BBQs, and watches just to name a few, • Company Sponsored Events: Family-friendly events with food, games and prizes, • Training and Development: Classes available to develop you personally and professionally to help you be the best version of you possible! TRL Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or veteran status. TRL’s employment policies and decisions on employment and promotion are based on merit, qualifications, performance, and business needs. The decisions and criteria governing the employment relationship with all employees are made in a nondiscriminatory manner, without regard to race, religion, color, national origin, sex, age, physical or mental disability, sexual orientation, gender identity, veteran status, or any other factor determined to be unlawful by federal, state, or local statutes. The range displayed on this job posting reflects the minimum and maximum target for new hire salaries for the position across all California locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education and/or training. Company DescriptionTRL Systems is comprised of teams of highly trained specialists in life safety and security strategic planning and implementation including installation, service, and IT integration. We’re so incredibly proud of the talented individuals who’ve chosen to build their futures at TRL. Our goal is to provide each one of them with resources to reinforce their strengths and overcome their weaknesses. All while encouraging innovation without reservation.TRL Systems is comprised of teams of highly trained specialists in life safety and security strategic planning and implementation including installation, service, and IT integration. We’re so incredibly proud of the talented individuals who’ve chosen to build their futures at TRL. Our goal is to provide each one of them with resources to reinforce their strengths and overcome their weaknesses. All while encouraging innovation without reservation.

Coordination and integration of fire and life safety systems with other building systems. Experience and proven ability to manage projects and team in a fire consultancy environment + Strong working knowledge of building and fire codesExcellent verbal and written communication skills, with an empha

Join our dedicated team at Sycuan Fire Department where we proudly serve our community and ensure the safety of our guests, residents and community.At Sycuan Fire Department we are committed to providing a safe and secure environment for all, and we are looking for passionate individuals to join our

Job Description Title: Senior Service Technician – Fire Life Safety & Security Systems Location: San Diego, CA About the Role: A well-established fire life safety and security systems integrator is seeking a Senior Service Technician in San Diego. This position involves servicing, maintaining, and repairing low-voltage systems in commercial and secure environments, including hospitals, schools, and high-rise buildings. Responsibilities: Respond to service calls for fire alarm, nurse call, access control, CCTV, and intrusion detection systems. Diagnose and troubleshoot system issues. Repair or replace faulty components. Provide technical support and training to end users. Maintain accurate service records. Collaborate with internal teams and vendors. Qualifications: 5+ years of experience with systems such as EST3, Lenel, and Ascom. High School Diploma or equivalent. Valid California Driver’s License and auto insurance. Ability to work flexible shifts including nights/weekends. Must meet vaccination requirements for hospital work. Physical Requirements: Drive up to 2+ hours/day. Work indoors/outdoors in varying conditions. Lift up to 20 lbs, work at heights, and in confined spaces. Stand/sit for extended periods. Work Environments May Include: Hospitals, commercial buildings, construction sites, high-rise/mid-rise buildings. Additional Info: Pre-employment drug screening and background checks required. Driving record must meet insurance requirements. Equal opportunity employer. Company DescriptionOutsource is the Nation's leading provider of low voltage and electrical talent. We work EXCLUSIVELY in electrical and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage and electrical talent. We work EXCLUSIVELY in electrical and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Sheetmetal Fitter Improvers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:Under supervision of a supervisor or Journeyman, this position is responsible for the removal, assembly, installation and repair of sheetmetal products and equipment such as HVAC ducting, furniture, nonstructural bulkhead systems and ceiling systems in berthing, heads, living spaces, and food service areas on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item., 5. Must be willing and able to carry out written and verbal instructions provided by the supervisor and journeyman., 6. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 7. Must have experience repairing and installing berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors., 8. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Four (4) years of related experience, one (2) of the years in a maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, being aware of the added responsibility for fire prevention., 5. Complete daily work assignments and provide status of unfinished work to the supervisor and journeyman., 6. Assist with documenting Objective Quality Evidence (OQE) as required by the work specifications., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription: Field Maintenance Technician is a role whose preliminary focus will be to learn the CGP story, learn our core values, and live it in your day-to-day. CGP’s Field Technician will deliver a high level of customer service to property management, hospitality, retail and restaurant clients at the highest professional level. Using a variety of skills and tools, completes all tasks safely, efficiently, with high quality, and within efficient timeframes to ensure reliability. Requirements: In this role, you will: Performing Maintenance Activities for Clients: • Must call client location in advance for all work orders., • Must have necessary tools when entering the job site, according to the trade and nature of the job., • Must have the necessary paperwork and specific instructions related to the client and work order (sign off sheet; check in and out instructions, etc.), • Introduce yourself with the store manager or MOD and explain the reason for the visit., • Smile, shake hands, and explain what they can expect (length of time, possible disruptions to their business, etc.), • If we leave a jobsite to buy materials, we must always leave the job area safe and secure and notify the SM or MOD., • Tech must call the office to request a PO number each time material is purchased for a job. When purchases are made after hours the work order number should be used instead., • If a job is expected to exceed the NTE approved by the office, you must call for approval to proceed before exceeding this amount., • Tech must always clean up before leaving the jobsite., • Tech must speak with the store manager of MOD before leaving the premises to explain what has been done, or what is left to do, and ask if they have any questions before you leave., • Tech must get before and after photos of all work performed or inspected., • Tech must get the SM or MOD’s signature on the related paperwork., • Tech must call the office to inform them when each job has been completed., • Establish effective working relationships with employees., • Work with Project Manager when necessary for clarification on jobs., • Maintain exceptional customer service skills., • Complete job tickets and mileage logs accurately and thoroughly on a daily basis., • Record the use of truck stock that is used on respective job tickets., • CGP employees will follow guidelines that will protect the interest and safety of all employees and the organization as well as ensure job site etiquette., • Company provided uniforms will be worn at all times., • Proper work boots are to be worn at all times., • Employees must present themselves in a professional manner:, • No foul language., • Use of cell phones only when necessary and not in the presence of clients, in stores or while driving., • Being prepared when arriving on site to begin work., • Always inform clients when the task has been completed or when leaving the job site., • Company vehicles must be parked in the proper location on the job site. Never park in front of clients’ main entry., • Work area must be clean upon departure; good housekeeping is part of the job., • Do not block aisles, traffic lanes, fire exits, stairs, etc., • Do not use tools with split, broken, or loose handles. Keep cutting tools sharp and carry all tools in the proper fashion., • Never do anything that is unsafe in order to get the job done., • Use your personal protective equipment whenever it is required., • Know the correct use of hand power tools. Use the right tool for the job., • Must be a quick learner., • Must have the ability to use basic hand tools and other equipment., • Must be able to follow verbal or written directions., • Must be a safe driver., • Must be able to pick up and deliver supplies/materials., • Must be neat, clean and organized in the shop, company vehicle and job sites., • Perform preventative maintenance work as required., • Communication skills with dispatch/office., • Understand and use the different check in/check out requirements for each individual client., • Ability to carry and use tools and equipment, • Requisite ability required to drive motor vehicle, • Ability to frequently bend, stoop, and crawl, • The physical limitation of ladders, • Ascend and descend a ladder while wearing a tool belt that weighs 10 lbs., • Get in and out of a van to retrieve various items., • Lift miscellaneous tools and products within the warehouse and van racks., • Occasionally sits and climbs ladders/stairs; performs fine motor and pinching movements; pivots with feet, and bends, twists, and laterally flexes back; reaches at overhead, shoulder, knee, and floor levels; shoulder circumduction while driving (turning steering wheel); stoops, squats, crouches, kneels, crawls, and presses foot pedals; extends, flexes, rotates, and laterally flexes neck Minimum • 1 to 3 years maintenance trade experience with a like industry such a property management, hospitality, retail or restaurant facility services., • High school degree or GED equivalent preferred, • Valid state driver’s license and a good driving record, • Successfully meet (and maintain) background check requirements Division: Maintenance and Construction Reports to: Project Manager and/or Project Administrator Position Classification: Full Time FLSA Status: Non-Exempt Average Working Hours: Up to 40 hours per week plus On-Call Service (rotating), some nights & weekends as needed. EEO Statement The equal employment opportunity policy of this employer provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state and local law. This employer hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

Job DescriptionDescription: Field Maintenance Technician is a role whose preliminary focus will be to learn the CGP story, learn our core values, and live it in your day-to-day. CGP’s Field Technician will deliver a high level of customer service to property management, hospitality, retail and restaurant clients at the highest professional level. Using a variety of skills and tools, completes all tasks safely, efficiently, with high quality, and within efficient timeframes to ensure reliability. Requirements: In this role, you will: Performing Maintenance Activities for Clients: • Must call client location in advance for all work orders., • Must have necessary tools when entering the job site, according to the trade and nature of the job., • Must have the necessary paperwork and specific instructions related to the client and work order (sign off sheet; check in and out instructions, etc.), • Introduce yourself with the store manager or MOD and explain the reason for the visit., • Smile, shake hands, and explain what they can expect (length of time, possible disruptions to their business, etc.), • If we leave a jobsite to buy materials, we must always leave the job area safe and secure and notify the SM or MOD., • Tech must call the office to request a PO number each time material is purchased for a job. When purchases are made after hours the work order number should be used instead., • If a job is expected to exceed the NTE approved by the office, you must call for approval to proceed before exceeding this amount., • Tech must always clean up before leaving the jobsite., • Tech must speak with the store manager of MOD before leaving the premises to explain what has been done, or what is left to do, and ask if they have any questions before you leave., • Tech must get before and after photos of all work performed or inspected., • Tech must get the SM or MOD’s signature on the related paperwork., • Tech must call the office to inform them when each job has been completed., • Establish effective working relationships with employees., • Work with Project Manager when necessary for clarification on jobs., • Maintain exceptional customer service skills., • Complete job tickets and mileage logs accurately and thoroughly on a daily basis., • Record the use of truck stock that is used on respective job tickets., • CGP employees will follow guidelines that will protect the interest and safety of all employees and the organization as well as ensure job site etiquette., • Company provided uniforms will be worn at all times., • Proper work boots are to be worn at all times., • Employees must present themselves in a professional manner:, • No foul language., • Use of cell phones only when necessary and not in the presence of clients, in stores or while driving., • Being prepared when arriving on site to begin work., • Always inform clients when the task has been completed or when leaving the job site., • Company vehicles must be parked in the proper location on the job site. Never park in front of clients’ main entry., • Work area must be clean upon departure; good housekeeping is part of the job., • Do not block aisles, traffic lanes, fire exits, stairs, etc., • Do not use tools with split, broken, or loose handles. Keep cutting tools sharp and carry all tools in the proper fashion., • Never do anything that is unsafe in order to get the job done., • Use your personal protective equipment whenever it is required., • Know the correct use of hand power tools. Use the right tool for the job., • Must be a quick learner., • Must have the ability to use basic hand tools and other equipment., • Must be able to follow verbal or written directions., • Must be a safe driver., • Must be able to pick up and deliver supplies/materials., • Must be neat, clean and organized in the shop, company vehicle and job sites., • Perform preventative maintenance work as required., • Communication skills with dispatch/office., • Understand and use the different check in/check out requirements for each individual client., • Ability to carry and use tools and equipment, • Requisite ability required to drive motor vehicle, • Ability to frequently bend, stoop, and crawl, • The physical limitation of ladders, • Ascend and descend a ladder while wearing a tool belt that weighs 10 lbs., • Get in and out of a van to retrieve various items., • Lift miscellaneous tools and products within the warehouse and van racks., • Occasionally sits and climbs ladders/stairs; performs fine motor and pinching movements; pivots with feet, and bends, twists, and laterally flexes back; reaches at overhead, shoulder, knee, and floor levels; shoulder circumduction while driving (turning steering wheel); stoops, squats, crouches, kneels, crawls, and presses foot pedals; extends, flexes, rotates, and laterally flexes neck Minimum • 1 to 3 years maintenance trade experience with a like industry such a property management, hospitality, retail or restaurant facility services., • High school degree or GED equivalent preferred, • Valid state driver’s license and a good driving record, • Successfully meet (and maintain) background check requirements Division: Maintenance and Construction Reports to: Project Manager and/or Project Administrator Position Classification: Full Time FLSA Status: Non-Exempt Average Working Hours: Up to 40 hours per week plus On-Call Service (rotating), some nights & weekends as needed. EEO Statement The equal employment opportunity policy of this employer provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state and local law. This employer hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

Job Description Who We Are Evergreen Fire and Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems. The Key to Our Success Our success is largely due to the experience, skills, and expertise of the best and brightest employees in the industry. Due to growth, we are looking for additional qualified experts to join the Evergreen team. Think you have what it takes? Great! We welcome you to submit your qualifications for this great Evergreen Fire and Security career opportunity. The Opportunity This opportunity as an Electronic Security Specialist Technician is perfect for an experienced low-voltage technician who is based in the San Diego area and enjoys traveling! Expected travel time is up to 50%. The Responsibilities • Installs, repairs, tests, and maintains security projects, • Serves as the face of Evergreen to our customers onsite by providing top-notch service and product training, • Ensures safety through compliance with relevant State and Federal regulations, • Handles service orders and project administration, • Low-voltage experience, • Ability to travel extensively, • Ability to obtain a U.S. government clearance, • Valid CPR/First Aid card, • Valid electrician certificate or trainee card, • High school diploma or equivalent, • Electrical wiring experience, • Basic computer skills (Microsoft Office), • Good communication skills to interface with customers, • Ability to call and schedule appointments, follow instructions, and understand code requirements, • Attention to detail, • Ability to work autonomously, • Ability to work well with others and come to work with a positive attitude, • Valid driver’s license and proof of minimum liability insurance, • Prior experience working on government contracts or military bases Here at Evergreen, we pay competitive wages and benefits, but we also go the extra mile for our Technicians, and even more so for those who travel frequently. Sound good? Check these out: Awesome Travel Perks! • Additional weeks of paid leave for extended travel—up to 320 additional hours of time off!, • Paid flights for weekends at home for regional travel, • Weekly per diem for meals, incidentals, and lodging paid to you, • Paid TSA Pre-Check, • Competitive pay, • Paid Time Off (PTO), • Paid holidays, • Medical, dental, and vision insurance plans, • 401(k) plan, • Up to 4% match available, • 100% vested from day one, • Healthcare flexible spending accounts, • Dependent care flexible spending accounts, • Employee Assistance Program (EAP), • Company-sponsored group term life insurance, • Corporate perks program We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at . Evergreen Fire & Security is a US government contractor with sensitive access requirements. As our employee, you must also be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. citizenship due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire and Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs. Powered by JazzHR kSKdoRVgUf

Job Description 🚪 Commercial Garage Door Technician – San Diego, CA Open the door to your next big opportunity with Garage Door Medics! Do you take pride in solving problems, enjoy working with your hands, and want to be part of a team that values professionalism, safety, and growth? Join Garage Door Medics, a trusted name in the garage door industry, as we expand our commercial technician team in San Diego! 🛠️ What You'll Do: As a Commercial Garage Door Technician, you'll be the face of our company—servicing, installing, and maintaining a variety of commercial and industrial door systems including sectional doors, rolling steel doors, fire doors, dock equipment, and more. You'll work hands-on, troubleshoot on the spot, and leave customers confident in the safety and performance of their systems. 🔧 Key Responsibilities: * Install, service, and repair commercial door systems and equipment. * Perform job site inspections to ensure all work meets safety standards and company expectations. * Maintain detailed job documentation (notes, diagrams, photos). * Identify customer needs, recommend solutions, and upsell products when appropriate. * Prioritize safety at all times and comply with OSHA guidelines. * Communicate clearly and professionally with customers, team members, and office staff. * Utilize tools and software (like ServiceTitan) to track jobs and update progress. ✔️ What We're Looking For: * Valid driver's license with a clean driving record. * Minimum 3 years previous experience in commercial garage door work. * Able to lift 75+ lbs, climb ladders, and work on your feet. * Familiar with safety standards and OSHA best practices. * Tech-savvy and comfortable using mobile apps and documentation tools. * Strong communication skills and commitment to delivering excellent customer service. * High school diploma or equivalent required. 🎁 What's In It for You: * Competitive pay with room for advancement * Health, dental, and vision insurance * 401(k) with company match * Paid time off + holidays * Employee discounts and referral bonuses * Training and certifications to help you grow in your trade * A tight-knit, family-owned company culture backed by a national network of service professionals 💼 About Garage Pros: Garage Door medica is a family-owned and operated leader in the garage door industry. We specialize in residential, commercial, and industrial garage door services across the San Diego area. Our mission? Deliver quality craftsmanship, honest service, and unmatched value to every customer, every time. Ready to build your career with a company that opens doors—literally and figuratively? Apply today and join a team where your skills, work ethic, and positive attitude will be recognized and rewarded. Guild Garage Group LLC is an Equal Opportunity Employer AA/EOE/M/F/V/D. In compliance with the Americans with Disabilities Act, Garage Door Medics may provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. All candidates are required to undergo pre-employment Background and Drug Screenings, as well as a Motor Vehicle Record Check. *This posting provides details on potential commissioned compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as a salary offer. Pay Range$20—$25 USD

Job Description Do you love to work with people, enjoy problem solving, passionate and thrive working in an environment where you can support your community and neighbors? Opening doors to your dream career! We're seeking a positive, personable garage door technicians and installers for a rewarding career opportunity! You'll connect with new people, tackle tough problems, and raise the bar on an excellent customer experience. We welcome applicants who are interested in upward mobility, a positive work environment, and can't wait to get started! At Garage Door Medics, we strive to give our customers the best experience when performing garage door installations, garage door maintenance, and replacing garage door openers. We serve the surrounding metro area with residential, commercial, and industrial garage door services. We'll give you the training and tools to perform in a fast-paced, multitasking environment. If you're a star at your job you will have respect, admiration, excellent compensation, and an opportunity to grow. The position is based out of our San Diego, CA office. Compensation: Hourly + Piece Rate Responsibilities: Continuous evolution of skills to amplify both personal acumen and the collective expertise as a team. Adherence to safety protocols and guidelines. Prioritize personal well-being and foster a secure environment for the team, clients, and broader community. Uphold accurate records of all work undertaken. Documenting notes, diagrams, and photos. Streamline future maintenance and repairs, elevating operational efficiency. Thorough inspections of installations and repair, aligning them with industry benchmarks and company standards. Workmanship guarantees installations and repairs meet the highest safety standards and exceed client expectations. Maintain a positive, empathetic and professional attitude toward customers and employees at all times Identify customers' needs, clarify information, research every issue and provide solutions and/or alternatives Maintain records of customer interaction, transactions, comments, complaints Seize opportunities to upsell products when they arise Understanding our products/services inside and out Communicate and coordinate with colleagues as necessary Perform other duties as assigned Skills/Qualifications: Valid license and clean MVR Mechanical aptitude Saturday availability a must Experience in garage door installation, repair and maintenance of Commercial door systems a plus (sectional, rolling steel, fire doors, high speed doors, and dock equipment) Ability to lift 75 plus pounds, climb a ladder and use basic hand tools Familiar with OSHA safety rules and best practices Excellent customer service, and organizational skills Ability to understand root causes of technical situations Strong verbal communication skills along with active listening Experience with Service Titan a plus Ability to use tablets for paperwork Customer focus and adaptability to different personality types Ability to multi-task, set priorities and manage time effectively High school degree What we have to offer you! Benefits – Health, Vision, Dental, PTO, Holidays, 401k and matching Company Vehicle Employee Discount Employee Referral Our focus on growth will create many opportunities to take on more responsibilities and develop into senior roles Guild Garage Group LLC is an Equal Opportunity Employer AA/EOE/M/F/V/D. In compliance with the Americans with Disabilities Act, Garage Door Medics may provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. All candidates are required to undergo pre-employment Background and Drug Screenings, as well as a Motor Vehicle Record Check. #GuildSP Pay Range$18—$20 USD

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare the work area for hot work. Coordinate efforts with the fire watch. b. Measure, lay out, and mark structures to be removed using drawings, specifications, shop sketches, or direction from the structural supervisor. c. Cut out existing structures as required by the drawings or specifications, or as directed by the supervisor. d. Construct templates and fabricate foundations or other structures. e. Install prefabricated foundations and structures in accordance with drawings and specifications. f. Install aluminum in accordance with 5XXX standards. g. Direct and monitor the activities of assigned helpers or improvers. h. Remove remnants flush in preparation for new structures or succeeding production tasks. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Now is the best time to join Johnstone Supply. The Regional Operations Manager is a strategic leader of business success within a defined geographic, multi-branch operational area. This includes overseeing operations for the assigned branches as one high-performing unit including sales growth, margin protection and maximization, inventory management, process improvement, employee development, and ensuring excellent customer experience. Our customers are professional certified Technicians and Contractors who come to Johnstone for our product selection, expertise, and quality service. Johnstone is growing, and so can you. Position responsibilities: • Manages, trains, develops, counsels, and coaches Branch Managers including but not limited to setting clear expectations and providing feedback to ensure performance., • Participates in the hiring, recruiting, and interview processes within established processes and guidelines., • Meets regularly with direct reports and with store support personnel and outside sales personnel to ensure delivery operational outcomes and support sales and other company initiatives., • Aligns with leadership on market pricing, quotes, promotions, and sales initiatives., • Serves the point of contact for the assigned area or region for all staff and vendors., • Supports product strategy and works cross functionally with pricing, vendor management, marketing, sales and other related teams., • Builds and maintains relationships with customers and resolves escalated issues quickly and effectively., • Owns the regional sales and margin budgets and expense control., • Establishes and maintains contractor training schedules and ongoing product educational/awareness initiatives in conjunction with vendors and Johnstone Supply for assigned market/s., • Ensures warehouses, delivery routes, and showrooms run safely and efficiently., • Maintains a safe working environment through communication, training, observation, and coaching employees as well as removing safety obstacles and complying with all applicable regulations and requirements (i.e. OSHA, Fire)., • Maintains full legal and policy compliance across all sites., • Supports outside and inside sales activities including developing and/or implementing sales programs and promotions, following through on established programs., • Analyses trends and produces reports utilizing metrics, KPIs, and other data to support decision-making and monitoring, • Adheres to and enforces all company policies, procedures and business ethics., • Bachelor’s degree in logistics, business, or related field preferred, • 10 or more years’ experience managing multi-site operations in distribution or HVAC/R with minimum five years’ experience managing multi-site locations preferred, • Minimum of five years’ experience managing a team of direct reports, • Knowledge of wholesale distribution store operations, including order fulfillment, inventory control, customer service, showroom merchandising, shipping and receiving, and sales, • Proven record of P&L management including achieving revenue and margin goals, • Expert knowledge of wholesale distribution operations, including order fulfillment, inventory control, logistics, customer service, showroom merchandising, shipping and receiving, and operational compliance management, • Strong people-leadership skills, from hiring to performance reviews, • Knowledge of human resource management principles, including recruiting and hiring, training and development, delegating, coaching, and evaluating employees, • Strong knowledge of PC-based applications (Excel, Word, Explorer) and business related software (i.e. Eclipse)., • General knowledge of governmental regulations as applied to product distribution, including OSHA regulations, Worker’s Compensation, Hazardous Materials Handling., • Valid driver’s license and ability to travel across assigned territory, • Safety: Always prioritizes safety, both at work and at home, while ensuring those who work for you work safely., • Customer Focused: Take the perspective of those we serve, anticipate their needs, and responding quickly., • One Team: We win together by collaborating with each other, focusing on the common goal, and leveraging the strengths of the team., • Own It: Take the initiative, act with a sense of urgency and pride, do things right the first time, and always act with integrity., • Paid Time Off (PTO) – 3 weeks of PTO for individual contributors and 4 weeks for leaders, • Safe Harbor 401(k) – 100% employer match up to 5% of base pay and immediately vests, • Holiday pay – we recognize and pay our employees for 7.5 holidays per year, • Employer subsidized medical, dental, and vision plans., • Employer paid life insurance and long-term disability, • Voluntary short-term disability, accident and critical illness insurance, • 24/7 Access to virtual care/telehealth options, and Parental Time Off, • Flexible spending accounts (FSA), • $100 wellness reward for completing annual health check-up, • Employee Assistance Program (EAP) for you, and your family, • Coverage for chiropractic, acupuncture, and massage therapy services, • Tuition reimbursement, up to $5,250 per year, • Employee referral bonus program – earn up to $4,000 per year, • Employee service milestone recognition program, • Employee discounts on products & retail discounts, • Variety of incentive plans for employees, • Bi-weekly pay days on every other Friday Johnstone Supply is North America’s leading wholesale distributor of HVACR equipment, parts, and supplies. Over the last seven decades Johnstone has grown into the industry leader with over 450 distributor branches and 6 distribution centers throughout North America resulting in over $4 billion in annual sales. We work with some of the largest companies in the world, including Daikin/Goodman, Honeywell, Emerson, Johnson Controls, Google, and Fujitsu, to provide contractors with world class products, technical expertise, and quality service. EOE & E-Verify Participating Employer.

Job DescriptionShift Leader Company & Culture For over 35 years El Pollo Loco continues to dominate the market in delivering the best citrus-marinated fire-grilled chicken. We opened our first restaurant in 1980 in Los Angeles, and today we are over 450 restaurants strong and still growing! From our products to our people, we're truly amazing! Have you ever envisioned leading a team to success or dared to help manage a million-dollar business? Well here's your opportunity to live the dream! Put your team-building skills to the test and bring us your passion, energy and excellent interpersonal skills. We'll provide you with an awesome training program, great mentors and an exceptional team that will help you launch your career. The rest is up to you! What's in it for you! We offer eligible Employees the following Benefits/Perks: • Medical, Dental & Vision Insurance, • Sick pay up to 40 hours per year, • Birthday pay, • Vacations pay, • Tuition Reimbursement, • Weekend OFF a month, • Opportunity for Advancement/Internal Promotions, • FREE individual Meals, • Discounted Family Meals*, • FREE shoes twice per year for zero accidents*, • Flexible Schedules, • Competitive Pay, • Continues Training and Development, • Management review once a year with a merit increase when applicable Shift Leader Summary: • Provides oversight to Crew members in the absence of the General Manager or Assistant Manager. Coaches, directs, recognizes outstanding behavior, and establishes priorities for Crew members during their shift., • Trains Crewmembers on policies and procedures, ensuring compliance with food safety, security, quality and cleanliness standards, • Opening and/or closing the restaurant, • Creating and ensuring superior guest experiences, • Contributing to the achievement of cost and profit goals Requirements: • Experience: Must be an EPL Crewmember certified on all EPL SPECS positions or have 1 or more years of restaurant supervisory experience., • Education: High school diploma or equivalent (GED) preferred. Upon hire must pass the EPL Food Safety Audit (FSA) class., • Communication: Excellent written and verbal English communication skills (second language a plus), • Competencies: Basic math and computer skills, and strong customer service skills, • Food Handler Card: Must have a Serve Safe Certificate at time of hire or obtain a Serve Safe Certificate, where applicable Job Details: • Work Hours: Full-Time hours, plus some Overtime may be expected, • Career Advancement/Career Plan: We promote heavily from within, so from a Shift Leader you can develop to become an Assistant Manager, General Manager, Area Leader, and beyond!, • Work Attire: EPL logo'd shirt will be provided, black slacks and no-slip shoes required