Fire safety jobs in Chula Vista, CaliforniaCrear alertas

Job DescriptionSalary: Arcetyp LLC is a growing small business that provides a broad range of consulting services to US Federal Government, US Military, and Commercial clients. Services include Management & IT Consulting, Program & Project Management, and Professional & Admin Services. We accept direct hire candidates only, W2 employee hires. We do not accept 1099 independent consultants. We do not accept staffing firms. We do not accept corp-to-corp (C2C) candidates. We can't sponsor H1B. Arcetyp LLC is looking for a Certified Pharmacy Technician. This position is onsite and located in Okinawa, Japan. POSITION RESPONSIBILITIES: • Perform a full range of pharmacy technician procedures., • Perform pharmaceutical dispensing duties including filling new outpatient prescriptions, refilling prescriptions, and entering orders into databases., • Perform information consultation duties including supporting new and refill prescriptions, supporting patient requests, supporting physicians requests, monitoring fordrug interactions, and reporting adverse drug reactions., • Perform quality improvement duties including performing drug storage inspection, reviewing expired supplies, and producing error and workload reports anddocumentation., • Assist with supply process duties including assisting with stocking/restocking shelves, inventory maintenance, and producing not in stock reports as directed byGovernment Supervisor., • Utilize pharmacy computer and robotic systems in accordance with MTF protocols., • Participate in executing the Emergency Preparedness Plan (drills and actual emergencies) as scheduled by the MTF (typically semiannually)., • Participate in peer review and performance improvement activities., • Participate in the implementation of the Family Advocacy Program as directed by government supervisor., • Participation shall include, but not be limited to, appropriate medical examination, documentation, and reporting., • Attend and/or comply with all annual training classes required by the Command, to include but not limited to online annual training provided by the MTF, disastertraining, infection control, Sexual Harassment, Bloodborne Pathogens, Fire and Safety, Chemical,Biological, Radiological, Nuclear and Explosives (CBRNE), and all other required training., • Actively participate in the commands Performance Improvement Program. Participate in meetings to review and evaluate the care provided to patients, identifyopportunities to improve the care delivered, and recommend corrective action when problems exist., • Perform efficiently in emergency patient situations following established protocols, remaining calm, informing appropriate persons, and documenting events., • Anticipate potential problems/emergencies and make appropriate interventions., • Notify supervisor, director, or other designated person regarding problems that the HCW is unable to manage., • Comply with the standards of The Joint Commission, applicable provisions of law, and the rules and regulations of any and all governmental authorities pertaining tolicensure and regulation of health care personnel and medical treatment facilities, the regulations and standards of medical practice and the MTFs medical staffby laws., • Participate in continuing education to meet own professional growth., • Participate in the provision of in-service training to clinic staff members., • Provide training and/or direction as applicable to supporting government employees (e.g., hospital corpsmen, students, etc.)., • Operate and manipulate automated systems such as CHCS, AHLTA, ADS, Essentris, and Clinical Information System (CIS), participate in clinical staff PerformanceImprovement (PI) and Risk Management (RM) functions, as prescribed by the Commander., • Attend and participate in various meetings as directed by government supervisor., • The HealthCare Worker (HCW) shall comply with the HIPAA (Health Insurance Portability and Accountability Act) privacy and security policies of the treatment facility., • Perform timely, accurate, and concise documentation of patient care. NECESSARY SKILLS AND KNOWLEDGE: • Maintain a level of productivity comparable with that of other individuals performing similar services., • Adhere to and comply with the Department of the Navy, Bureau of Medicine and Surgery, and local instructions and notices in effect during the term of the contract., • Practice aseptic techniques as necessary; comply with infection control guidelines to include the proper handling, storage, and disposal of infectious wastes, and theuse of universal precautions to prevent the spread of infection., • Function with an awareness and application of safety procedures., • Apply an awareness of legal issues in all aspects of patient care and strive to manage situations in a reduced risk manner., • Exercise awareness and sensitivity to patient/significant others' rights, as identified within the MTF., • Maintain an awareness of responsibility and accountability for own professional practice., • Maintain DoD email account as directed by government supervisor., • Exercise appropriate delegation of tasks and duties in the direction and coordination of health care team members, patient care, and clinic activities., • Each HCW providing service under this contract or resultant task orders shall undergo an orientation and shall complete mandatory Navy and DoD on-line training asrequired., • Be able to comply with all applicable Federal, State, and local laws, Department of Defense, Department of Navy, Bureau of Medicine and Surgery, and MTFinstructions and policies., • Proficiency in Microsoft Office software applications including Word, Excel, Access, PowerPoint, and Outlook. MINIMUM QUALIFICATIONS: • Possess and maintain a current certification and registration by the Pharmacy Technician Certification Board (PTCB)., • HCW shall be in good standing and under no sanction or suspension by the Federal Government., • Possess and maintain current certification in either the American Heart Association BLS for Healthcare Providers or American Heart Association Healthcare ProviderCourse., • Able to read, write, speak, and understand the English language fluently and maintain good communication skills with patients and other health care personnel., • Ability to pass all background/suitability checks., • A valid drivers license; ability to travel locally as needed. PREFERRED QUALIFICATIONS: • A thorough understanding of the military lifestyle and experience working with military family members., • Working knowledge of relevant military, state, federal, and local laws and resources., • Highly developed written, oral, and presentation communication skills. Min. Citizenship Status Required: U.S Citizenship. LOCATION: Okinawa, Japan COMPENSATION: Pay and benefits information for this position will be provided to interested candidates that apply. Arcetyp offers a package of compensation and benefits to full-time salaried employees. Pay and Benefits from our client: we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities. Arcetyp is an Equal Opportunity Employer and we highly value diversity of our workforce. We accept resumes from all interested parties and consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, sexual preference, personal appearance, family responsibility, the presence of a non-job-related medical condition or physical disability, matriculation, political affiliation, veteran status, or any other legally protected status.

Job Description Skilled Shipyard Helper (San Diego, CA) Lead Marine San Diego National City, CA, USA Full Time $17.25 - $19.50/hr 1st Shift – 6:00am to 2:30pm 2nd Shift - 3:00pm to 11:30pm 3rd Shift - 10:00pm to 6:00am Lead Marine is currently hiring skilled helpers for long term work in the San Diego Shipyard Industry. This is a great opportunity to get your foot in the door to major defense contracting companies, and learn on the job skills that could turn into a career. All three shifts needed. Please apply now, or fill out an application on our website at Leadstaff.com > Quick Apply. Job Requirements and Qualifications: • Identifies and removes potential fire hazards in hot work area., • Assists with moving materials, welding equipment and cleans up when necessary., • Remains alert for extended periods of time., • In the event of fire, follows proper fire extinguishing procedure to extinguish and prevent spreading of fire., • Stops operations if any other hazardous conditions arise., • Communicates effectively with co-workers and management alike., • Other duties as may be assigned, such as needle gunning, paint removal, using power tools & hand tools, ect., • General laborer and clean up duties, • Work will vary depending on department (Electrical, Machinist, Sheet metal, Insulation, Carpentry, Painting, Rigging, etc.) Environmental Factors / Physical Demands: • Must be able to perform these as well as Essential Function(s) with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others., • Must be able to pass and maintain firewatch training certification, • Work in a wide variety of environments, conditions, and/or situations; including:, • Small and/or confined spaces., • At heights of 20 feet or more., • Routinely bending, twisting, kneeling climbing and reaching for 1-12 hours per day., • Sitting, standing, and/or walking for 1-12 hours per day., • Enduring noise, fumes, dust, and inclement weather., • Must be able to lift and carry 1-50lbs throughout the day. Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description Integral Senior Living, proudly part of the Discovery Senior Living family of operating companies, manages care and lifestyle-focused senior living communities. Our company, which was built on our “Culture Keepers,” employees thousands of vital Team Members and is committed to providing a positive work environment and culture that recognizes their value in providing excellent experiences for our residents. We offer rewarding career opportunities that include: • Competitive wages, • Access to wages before payday, • Paid time off and Holidays (full-time), • Comprehensive benefit package including health, dental, vision, life and disability insurances (full-time), • 401(K) with employer matching, • Paid training, • Opportunities for advancement, • Meals and uniforms, • Employee Assistance Program Our community is looking for a Housekeeper to join our team. Housekeeper Responsibilities: • Performs cleaning duties according to schedule (daily, weekly, monthly) in assigned areas such as apartment homes, common areas, lounges and offices., • Sweeps, dusts, dust mops, and wet mops all floors and stairways; spot cleans and vacuums floors, rugs, carpets and runners. Rotates runners in hallways and entryways., • Cleans, sanitizes, and polishes both lavatory, shower and sink fixtures and facilities; stocks dispensers as necessary., • Scrubs bath and shower room tiles, woodwork, window frames, and sills., • Maintains equipment and materials needed to perform work in a clean and orderly condition., • Collects trash and refuse from work areas and places in designated pick-up areas., • Responsible for collecting, cleaning and redistributing the community laundry., • Responsible for maintaining the commercial laundry in a clean, orderly and sanitary condition., • Ensures cleaning chemicals are kept stored and locked when not in use., • Ensures any cords, carts, equipment and other hazards are kept out of the way at all times, not blocking exits and in compliance with fire codes., • Reports any needed repairs and supply and equipment needs to the Lead Housekeeper., • High School diploma or equivalent preferred., • Previous housekeeping experience preferred., • Ability to communicate effectively speaking the primary language of the residents., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Must demonstrate an interest in working with a senior population., • Interacts with guests, residents, and staff in a courteous and friendly manner., • Team Member is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms., • Team Member is frequently required to climb or balance; stoop, kneel, crouch, or crawl. The Team Member is occasionally required to sit. EOE D/V

Job DescriptionDescription: The Engineer Supervisor supports the daily operations of the Engineering Department by overseeing maintenance staff, coordinating work orders, and ensuring the hotel’s physical assets are maintained to Hilton brand standards. This role ensures guest satisfaction through timely repairs, preventative maintenance, and a safe, well-functioning environment for guests and team members. Key Responsibilities Leadership & Supervision • Supervise engineering team members, assign daily tasks, and ensure work is completed efficiently and accurately., • Provide coaching, training, and performance feedback to engineering staff., • Assist with scheduling, timecard accuracy, and ensuring adequate coverage for all shifts., • Perform and oversee repairs on HVAC systems, electrical panels, plumbing, boilers, chillers, kitchen equipment, and general building systems., • Respond promptly to guest room and public area maintenance requests., • Lead and participate in the hotel’s Preventative Maintenance Program (PMP)., • Conduct routine inspections of guest rooms, equipment, and building systems., • Maintain a safe working environment by following OSHA, fire safety, and hotel safety protocols., • Ensure all equipment rooms, mechanical spaces, and storage areas are clean, organized, and secured., • Coordinate with outside contractors for specialized repairs or projects., • Monitor inventory of tools, supplies, and replacement parts; submit purchase requests as needed., • Maintain accurate logs, reports, and documentation for maintenance activities., • Support budget planning by identifying equipment needs and cost-saving opportunities., • Communicate effectively with leadership, housekeeping, front office, and other departments. Requirements: Qualifications Required • 2–3 years of hotel engineering or facility maintenance experience., • 1+ year of supervisory or lead experience., • Working knowledge of HVAC, electrical, plumbing, and mechanical systems., • Ability to read technical manuals, schematics, and safety documents., • Experience in a Hilton-branded property or similar full-service hotel., • Certifications such as EPA Universal, HVAC, CPO, or electrical licensing., • Experience with hotel work-order systems (HotSOS, Quore, etc.). Physical Requirements • Ability to lift up to 50 lbs., • Frequent walking, standing, bending, climbing ladders, and working in confined spaces., • Full-time; may include weekends, evenings, holidays, and on-call rotations based on operational needs.

Job Description Job Summary: The Shipyard Competent Person (SCP) is responsible for ensuring a safe working environment in shipyard spaces where employees may be exposed to hazardous conditions, including confined spaces, toxic materials, and fire hazards. The SCP performs inspections, atmospheric testing, and certifications in accordance with OSHA 29 CFR 1915 regulations and company safety policies. Key Responsibilities: • Conduct inspections of confined and enclosed spaces (e.g., tanks, voids, double bottoms) prior to worker entry., • Test atmospheric conditions using calibrated monitoring equipment to check for oxygen levels, flammable gases, and toxic vapors., • Determine and document whether spaces are safe for hot work, cleaning, painting, or entry., • Complete and maintain records of space certifications, permits, and inspection reports., • Collaborate with the Safety Department to ensure compliance with all relevant OSHA maritime regulations., • Identify and mitigate hazards through hazard recognition and effective communication with supervisors and workers., • Stop work and take corrective actions if unsafe conditions are identified., • Provide training and guidance to workers and supervisors on confined space safety and hot work practices., • Participate in safety audits, incident investigations, and toolbox talks., • Ensure that protective equipment and engineering controls are in place and properly used. Required Qualifications: • High School Diploma or GED., • Certification as a Shipyard Competent Person (in accordance with OSHA 29 CFR 1915.7)., • Minimum 2 years of experience in shipyard operations or maritime industry safety., • Familiarity with confined space entry procedures, gas testing equipment, and hot work protocols., • Ability to read and interpret blueprints and ship drawings., • Strong communication skills and attention to detail., • Physically able to work in tight spaces and climb ladders and scaffolding. Preferred Qualifications: • Additional safety certifications (e.g., OSHA 10/30 Maritime, First Aid/CPR, HAZWOPER)., • Experience in ship repair, marine construction, or naval operations., • Bilingual in English and Spanish is a plus. Working Conditions: • Exposure to outdoor elements, shipboard environments, confined spaces, and high-noise areas., • Use of personal protective equipment (PPE) including hard hats, respirators, gloves, and protective clothing., • May require weekend or shift work based on project needs. Compensation: • Competitive hourly wage or salary based on experience., • Benefits package includes health insurance, 401(k), paid time off, and training opportunities.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of First Class Outside Machinists to join our team in San Diego, CA. Pay Rate: $41/hour Responsibilities: • Install equipment on naval vessels in a safe and productive manner., • Disassemble, fault find, repair and reassemble shipboard equipment as directed by the supervisor., • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of quality procedures within department, • Ensure adherence to correct work procedures., • Continuously improve communications and flexibility within the team., • Contribute to innovation/productivity improvements., • Read technical bulletins and diagrams in relation to work being performed., • Work towards the team goal of delivering the vessel on time., • Minimum 2 years of shipyard or Naval (machinist mate) experience., • DBIDS eligibility required., • Must have reliable/own transportation., • Must be fire watch certified., • 11 panel Drug Screen, • Comfortable with heights, • Lift 50lbs without assistance, • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required., • Strong mechanical aptitude required., • Knowledge of ship terminology required., • Proven ability to interpret engineering drawings., • Demonstrated ability to safely operate all fixed and non-fixed machinery., • Ability set up machinery to meet flatness tolerance requirements., • Demonstrated ability to interpret job specifications., • Ability to perform work on marine vessels., • Must be able to follow directions and work with limited supervision. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description $27.70 Per Hour The Environmental Health & Safety (EH&S) Coordinator implements and monitors industrial environmental, health, and safety programs. The EH&S Coordinator also ensures the workforce is trained and performs industrial operations in accordance with federal, state, and local regulatory laws and regulations, provides regulatory consultation to the production workforce, performs audits and inspections of work processes and industrial equipment and compliance assurance, reports non-compliance or hazardous conditions found and, recommends effective action. This individual also conducts investigations into unplanned events regarding emergencies including but not limited to injuries, hazardous materials, spills, or fire and smoke incidents, while creating and disseminating comprehensive reports of the investigation to management and contractual oversite. Requirements Must be able to recognize, evaluate, and control occupational safety hazards as well as enforce company safety procedures, rules, and assist in educating employees in the area of work and personal safety • Must have knowledge of applicable regulations and US Navy Standard items, • Must have excellent written and oral skills; able to communicate effectively with all levels of the workforce, • Must be proficient in the use of PCs and word processing, spreadsheet, presentation, desktop applications, and electronic mail programs, • Must be a certified OSH 5400 Instructor, • Must be able to work any shift, • Must be a US Citizen CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description An Alarm Technician installs, maintains, repairs, and troubleshoots security and fire alarm systems for homes and businesses, working with wiring, sensors, cameras, and control panels to ensure systems meet safety codes and client needs. Key duties include reading blueprints, running low-voltage cables, programming equipment, testing systems, educating clients, and responding to service calls, requiring strong electrical knowledge and attention to safety and regulations. Key Responsibilities: • Installation: Install new alarm systems (burglar, fire, access control, CCTV) in residential, commercial, and industrial settings, following blueprints and codes., • Wiring & Cabling: Run and connect low-voltage wiring and cables for sensors, cameras, and control panels., • Configuration & Programming: Program system settings, user interfaces, and equipment to meet specific customer requirements., • Testing & Inspection: Conduct thorough testing and signal verification to ensure systems function correctly and comply with local/national standards., • Troubleshooting & Repair: Diagnose and fix issues with circuits, sensors, and components, often responding to emergency calls., • Maintenance: Perform routine preventative maintenance, upgrades, and inspections on existing systems. This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Diego,CA. Application Deadline This position is anticipated to close on Feb 16, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description Labor One is hiring Firewatch for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for fire prevention and fire protection at the assigned work site. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Understand the hazards associated with fixed and portable fire protection systems and the manner in which the systems are activated., 4. Understanding of proper use and care of fixed and portable fire protection systems., 5. Understand the Shipyard Competent Person Report, and where to find it., 6. Know the types of fire, the materials involved, and the type of fire extinguisher needed to suppress the fire., 7. Possess a Fire Watch training card., 8. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Have Fire Watch Training card with them at all times in the shipyard., 2. Carry out Fire Watch procedures to protect personnel and customer and BAE property from fire damage., 3. Ensure that designated hot work area is clean and free of combustible materials before hot work commences., 4. Keep your work area clean and safe at all times, especially at the end of the shift., 5. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication., 6. Show initiative and ownership of work and work area., 7. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments., 8. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or journeyman., 9. Work shifts and overtime as assigned the supervisor., 10. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 11. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Work Tasks Include: a) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. b) Carry an appropriately rated fire extinguisher to the assigned watch area. Make certain the fire extinguisher is in operable shape and not discharged prior to allowing hot work to start. c) Notify the person accomplishing the hot work if it is safe to proceed and when there is danger. d) Suppress fires when they occur. e) Report any uncorrected unsafe condition or working habits to the journeyman and supervisor. f) Assist with the hot work procedure and audits process making certain hot work notifications are in place and valid before hot work commences. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours per week; Overtime with supervisor approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionSalary: Arcetyp LLC is a growing small business that provides a broad range of consulting services to US Federal Government, US Military, and Commercial clients. Services include Management & IT Consulting, Program & Project Management, and Professional & Admin Services. We accept direct hire candidates only, W2 employee hires. We do not accept 1099 independent consultants. We do not accept staffing firms. We do not accept corp-to-corp (C2C) candidates. We can't sponsor H1B. Arcetyp LLC is looking for a Licensed Clinical Social Worker (LCSW).This position is onsite and located in Okinawa, Japan. POSITION RESPONSIBILITIES: Essential Job Functions: • Practice as an interdependent member of the health team and provide important components of primary health care through direct social work services, consultation, collaboration, referral, teaching, and advocacy., • Provide direct and indirect services to both inpatients and outpatients in accordance with social work standards of practice., • Assess and treat outpatients in individual, group, couples, and family modalities exercising professional judgment and using a widerange of social work skills to include individual and family counseling to assist patients and their families in dealing with chronic and acute diseases/injuries., • Conduct psychosocial assessments to determine patient needs and resources (both family and community support). Providecounseling to patient and family in matters directly related to patient limitations, adjustment to medical condition, and ongoing treatment., • Develop and implement discharge plans, follow-up care, and transfers to other health care facilities (e.g., nursing homes, rehabilitation hospitals, and VA facilities)., • Plan and maintain referral and coordination services with civilian health and social service agencies to provide optimal patient care., • Provide consultation services to medical, nursing, and ancillary hospital staff regarding psychosocial issues, discharge plans, andfollow-up care for patients and families., • Provide crisis intervention services., • Respond independently, and with various media, to appropriate military and community requests for lectures and presentations., • Take the initiative in seeking out opportunities to present programs to meet the needs of service members and their families, • Develop and maintain working relationships with community resources. Coordinate with teachers, lawyers, physicians, andrepresentatives of their service disciplines for the benefit of the service member and families., • Take initiative in identifying and assessing the needs of the military community and organize responses to address those needs., • Participate in executing the Emergency Preparedness Plan (drills and actual emergencies) as scheduled by the MTF (typicallysemiannually)., • Participate in peer review and performance improvement activities., • Participate in the implementation of the Family Advocacy Program as directed by government supervisor., • Participation shall include, but not be limited to, appropriate medical examination, documentation, and reporting., • Attend and/or comply with all annual training classes required by the Command, to include but not limited to online annual trainingprovided by the MTF, disaster training, infection control, Sexual Harassment, Bloodborne Pathogens, Fire and Safety, Chemical, Biological, Radiological, Nuclear and Explosives (CBRNE), and all other required training., • Actively participate in the commands Performance Improvement Program. Participate in meetings to review and evaluate the careprovided to patients, identify opportunities to improve the care delivered, and recommend corrective action when problems exist., • Perform efficiently in emergency patient situations following established protocols, remaining calm, informing appropriate persons,and documenting events. Anticipate potential problems/emergencies and make appropriate interventions., • Notify supervisor, director, or other designated person regarding problems that the HCW is unable to manage, • Comply with the standards of The Joint Commission, applicable provisions of law, and the rules and regulations of any and allgovernmental authorities pertaining to licensure and regulation of health care personnel and medical treatment facilities, the regulations and standards of medical practice and the MTFs medical staff bylaws., • Participate in continuing education to meet own professional growth., • Participate in the provision of in-service training to clinic staff members., • Provide training and/or direction as applicable to supporting government employees (e.g., hospital corpsmen, students, etc.), • Operate and manipulate automated systems such as CHCS, AHLTA, ADS, Essentris, and Clinical Information System (CIS), participate inclinical staff Performance Improvement (PI) and Risk Management (RM) functions, as prescribed by the Commander., • Attend and participate in various meetings as directed by government supervisor., • Perform timely, accurate, and concise documentation of patient care., • Maintain documentation of all treatment provided in accordance with clinic directives and prepare such records and reports as may berequired. All records and reports must be legible. Abbreviations must be only those listed in local instructions. QUALIFICATIONS: Necessary Skills and Knowledge: • Practice aseptic techniques as necessary; comply with infection control guidelines to include the proper handling, storage, and disposalof infectious wastes, and the use of universal precautions to prevent the spread of infection., • Function with an awareness and application of safety procedures., • Apply an awareness of legal issues in all aspects of patient care and strive to manage situations in a reduced risk manner., • Exercise awareness and sensitivity to patient/significant others' rights, as identified within the MTF., • Maintain an awareness of responsibility and accountability for own professional practice., • Maintain DoD email account as directed by government supervisor., • Exercise appropriate delegation of tasks and duties in the direction and coordination of health care team members, patient care, and clinic activities., • Each HCW providing service under this contract or resultant task orders shall undergo an orientation and shall complete mandatoryNavy and DoD on-line training as required., • Be able to comply with all applicable Federal, State, and local laws, Department of Defense, Department of Navy, Bureau of Medicineand Surgery, and MTF instructions and policies., • Able to read, write, speak, and understand the English language fluently and maintain good communication skills with patients andother health care personnel., • Proficiency in Microsoft Office software applications including Word, Excel, Access, PowerPoint, and Outlook. MINIMUM QUALFICATION: • Possess a Masters degree in Social Work (MSW) from a program accredited by the Council on Social Work Education (CSWE)., • Possess a current, unrestricted license to practice independently as a Clinical Social Worker in any one of the fifty States, the District ofColumbia, the Commonwealth of Puerto Rico, Guam or the U.S. Virgin Islands., • HCW shall be in good standing, and under no restrictions, with the state licensure board in any state in which a license is held or hasbeen held within the last 10 years HCW shall be in good standing and under no sanction or suspension by the Federal Government., • Possess and maintain current certification in either the American Heart Association BLS for Healthcare Providers or American HeartAssociation Healthcare Provider Course., • Ability to pass all background/suitability checks., • A valid drivers license; ability to travel locally as needed., • Successful completion of the Tri Service Internal Behavioral Health Consultant (IBHC) training or Tri Service Behavioral Health CareFacilitator (BHCF) training course., • The HCWs shall provide a minimum of 30 days of services prior to attending the training and must successfully complete the IBHC orBHCF training within 90 days of performance under the task order. PREFERRED QUALIFICATIONS: • A thorough understanding of the military lifestyle and experience working with military family members., • Working knowledge of relevant military, state, federal, and local laws and resources., • Highly developed written, oral, and presentation communication skills. Min. Citizenship Status Required: U.S Citizenship. LOCATION: Okinawa, Japan COMPENSATION: Pay and benefits information for this position will be provided to interested candidates that apply. Arcetyp offers a package of compensation and benefits to full-time salaried employees. Pay and Benefits from our client: we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities. Arcetyp is an Equal Opportunity Employer and we highly value diversity of our workforce. We accept resumes from all interested parties and consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, sexual preference, personal appearance, family responsibility, the presence of a non-job-related medical condition or physical disability, matriculation, political affiliation, veteran status, or any other legally protected status.

Job Description INTRODUCTION: The Building Engineer shall be responsible to the Building Manager in the maintenance & repair of Las Flores Tower and all equipment within. The Engineer shall work a minimum of forty (40) hours per week, Monday thru Friday, excluding holidays; the daily hours shall be flexible and convenient to the Engineer and Manager. He/she shall be allowed 10 days (80 hours) paid vacation each year and 15 days (120 hours) after 5 years of continuous employment. He/she shall be allowed seven (10) paid holidays per year (New Year’s Day, Presidents Day, Memorial Day, Juneteenth, July 4th, Columbus Day, Veterans Day, Labor Day, Thanksgiving Day, and Christmas Day.) He/she shall carry a hand-held radio while on duty for communications with building staff. He/she will be on call at all times (excluding apartment work) during his off hours. The Engineer shall receive hourly pay and overtime rates or compensatory time off for the time he/she is called in or working after normal working hours. He/she will be paid mileage for the use of his/her personal vehicle for Association business at the allowable rate. The Engineer shall perform minor repairs as requested by the Homeowners during normal working hours as time permits, however, building maintenance takes priority over all apartment work. The Manager shall charge the Homeowner for the cost of material and the labor at a rate established by the Board of Directors. The Engineer shall order and maintain supplies sufficient to perform his assigned tasks, stocking only fast moving/hard to get items. He/she shall inventory all materials/tools yearly and provide a written report to the Manager. The Engineer will assist the Manager in planning and preparation of the annual Budget and the Replacement Reserve Schedule to include building maintenance, equipment, materials & tools. The Engineer shall review all unit modification plans prior to their submission to the City Inspector to ensure all modifications meet code/permit requirements and advise the Manager as to the approval/disapproval or changes that are required to meet standards. He shall obtain a copy of the plans/permits and maintain a file in the engineering office for future reference. He shall physically look in the unit being modified to ensure compliance by the contractor, advising the Manager of any discrepancy found. The Engineer reports directly to the Manager and under no circumstances does the Engineer discuss Association matters, engineering or otherwise, with the Board or Homeowners. If the issue is of such importance that the Engineer feels direct communications are necessary, the Manager must be first notified. Homeowner, service queries must be directed to the Head of Security for entry into the engineering services request log. Physical Requirements As is indicated in the detail of General Duties, a full or nearly full range of motion is required, to include strenuous physical activity comprised of lifting, crawling, climbing of ladders, bending and stooping. GENERAL DUTIES (A) Building: Repair & maintain all doors (excluding elevators & units), including closures and, locks. As required, maintain safety handrails, ramps & common area plumbing including soil drains. Make recommendations to the Manager when an outside contractor is required. Maintain all garage entry/exit gates and operators as required. Recommend to the Manager any exterior/interior painting/repairs of the common areas as needed. (B) Electrical: Repair/replace as required all light bulbs, ballasts, switches & outlets throughout the building common areas. Inspect regularly all electrical room switches, fuses, contacts & power panels and repair as required. Repair/replace all electric motors in the common areas as required. (C) Air handlers: Maintain all blowers and fans in a state of readiness and ensure that the CO2 Monitors in the garages control the exhaust fans properly. (D) Pumps/Regulators: Repair/replace as required all pumps throughout the common areas of the building. Inspect regularly in accordance with maintenance instructions. (E) Piping Systems: Inspect all piping & valves frequently in the common areas to ensure corrosion and wear does not exist and the valves will shut off. Repair/replace as required. (F) Fire alarms/fire fighting systems: Ensure the fire alarm system is tested quarterly by the fire alarm company including all pull stations common area and in unit smoke detectors attached to the fire alarm system. Insure the building is kept fire safe at all times and ready for the Coronado Fire Dept. annual inspection. Repair/replace components of the alarm system as required. Inspect the fire wet/dry standpipes/valves & hoses every six months as required by State law. Test runs the fire pump monthly to insure it will maintain the specified safe pressure on the wet standpipe at all times. Ensure the entire fire wet/dry standpipes are inspected by a qualified company and certified every five years. (G) Hot Water Heaters: Inspect/repair in accordance with the schedule. Test all safety cutouts, switches & pressure/temperature relief’s monthly insuring they operate satisfactorily. Utilize only one heater when the occupancy of the building will allow, then shift heaters monthly. Perform regular maintenance in accordance with schedule. (H) A/C Boilers: Inspect daily to ensure proper pressure in boiler, the correct water level is in the day tank and the boiler is not leaking. Perform maintenance in accordance with instructions. Secure boilers in summer months in accordance with proper procedure. Maintain boilers in a high state of readiness and safety at all times. (I) Evaporative Cooling Tower: Maintain the tower in accordance with the maintenance schedule. Inspect daily to insure proper water level/operation/chemical feeding. Dismantle the tower yearly in winter and clean all rust/scale and make all mechanical and paint repairs at that time to insure proper continuous operation in the summer. (J) Emergency Generator: Inspect water/oil level weekly and exercise the engine for a minimum of thirty (30) minutes weekly, Test the generator under load each quarter for thirty (30) minutes. Change oil/filter yearly and flush radiator every two years adding two (2) gallons of antifreeze and fill with purified water. Ensure unit is in top condition as it is required for operation at any time in an emergency. (K) Air Conditioners: Change all air filters as required and check running condition daily when in use. Mechanically clean the condenser/evaporators on the hallway A/C yearly & preserve them. Inspect drive belts/motors and all bearings repair/replace as necessary. (L) Trash Chute: Maintain the entire trash chute in accordance with the schedule. Lube/operate all doors including the sliding door at the bottom of chute (it must have proper fire safety fuse link). Wash the chute down from the 16th. floor weekly with deodorizer. (M) Building Entry Ponds: Clean ponds and pump strainers as required or at least once per month. Maintain proper chlorine in ponds to deter the growth of algae. (M) Planned Maintenance Schedule. Complete assigned maintenance as scheduled. If not accomplished or partially accomplished, notify the Manager. Company DescriptionCoronado Shores Condominium Association NO. 4Coronado Shores Condominium Association NO. 4

Job Description Summary Are you a Project Engineer with 2-5 years of experience looking to grow your career?Our client, in San Diego, stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, they are an internationally recognized leader in many of the key markets we serve. They provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environment. Duties and Responsibilities • Provide on-site technical and administrative support for construction activities., • Review and process RFIs and submittals promptly and accurately., • Track all project documents in logs and files. Maintain and update all project tracking logs consistently., • Update project plans with RFIs and supplemental instructions to ensure accurate documentation., • Assist the CM with estimating and processing change orders, including independently reviewing contractor mark-ups, checking math, verifying scope, and preparing change orders., • Provide technical and administrative support to the CM as needed., • Review design drawings to ensure compliance with project requirements., • Review certified payroll, fringe benefits, and hourly rate worksheets., • Fully manage the close-out and turnover process to ensure a seamless project handoff., • Oversee daily site operations to ensure work is performed according to project specifications and schedules., • Monitor contractor performance and adherence to safety protocols and quality standards., • Conduct regular site inspections to verify progress, identify potential issues, and recommend corrective actions., • Coordinate and facilitate site meetings between contractors, subcontractors, and the project team to resolve on-site concerns., • Maintain accurate and detailed site logs, including daily reports, weather conditions, and contractor activity., • Support enforcement of site-specific environmental and safety compliance., • Provide real-time updates on the CM's on-site activities and potential risks., • Assist in managing the punch list process, including coordinating with contractors to address outstanding items Qualifications & Requirements • Bachelor's Degree in Construction Management, Building Construction, or related field preferred, • 2+ years Minimum experience in the construction industry as a project engineer or similar, • Solar / PV experience is a plus, • Electrical experience is preferred but not required, • Prior experience working for a general contractor is a plus, • Excellent communication skills and professional attitude, • The position is on-site, in-person only, • Field experience managing a contractor is preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company Paid Holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensationEmployment Type: Full time Location: San Diego, CA

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Designing a better world is more than a career, it’s a calling! Come work with a team of professionals dedicated to design excellence at Coffman Engineers San Diego office. We are seeking a dynamic, innovative, and quality-oriented Fire Protection Engineer with zero to three years of experience to perform consulting services for internal and external clients. You must have excellent written and verbal communication skills along with a high-level ability to manage multiple clients and multiple projects at one time. The successful candidate will be enthusiastic, have a desire to work and grow with a multidiscipline engineering team, and be willing to have fun. Knowledge, Skills, & Abilities • Provide fire and life safety code consulting for relevant ICC (IBC, IFC, IMC) codes and NFPA standards., • Able to assist in performing consulting services for internal clients, utilizing Fire Protection Engineering technical skills, including but not limited to: automatic suppression system design; fire detection, alarm and communication system design; code analysis; egress analysis; fire resistant construction analysis; smoke control analysis; as well as general fire protection and life safety concepts and research., • Develop fire models, smoke control models/analysis, and pressurization models/analysis., • Review and provide consulting for life safety, building, and fire code compliance., • Develop fire safety strategies for special hazards., • Participate in internal team meetings and external client meetings., • Collaborate with multiple teams across multiple offices in a multi-discipline environment., • Perform research and documentation for internal and external distribution., • Attend and participate in local and national trade organizations, such as SFPE and NFPA.Qualifications, • Bachelor’s degree (B.S.) in Engineering from accredited college or university in Fire Protection Engineering, Fire Sciences, or related engineering field., • Potential for EIT, NICET, and PE, • Experience with computer software programs and analysis systems (such as Microsoft Office, AutoCAD, RISA, ETABS, etc.), • Design experience with various materials – steel and concrete; masonry, wood and light gauge (preferred), • Background working in the Fire Protection or Fire Alarm industry (preferred), • General building construction knowledge, • Experience working with AutoCAD or Revit, • Strong communication skills essential for a team-based and team-leading working environment. This position is not Eligible for sponsorship. Additional Information Why You Want To Work Here Coffman Engineers is a company that truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary/benefits package, a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Our offices provide several engineering discipline services, which work together collaboratively to provide complete engineering design packages. Coffman offers a flexible schedule and this position may be eligible for PTO, a fun office environment with a high-performing team and a fully stocked kitchen! We welcome the dedicated and the driven. Join us. Don’t take our word for it. Check out what others are saying: Coffman at a Glance: • 46 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • Zweig Group Hot Firm List, Zweig Group, 2021, • Top 500 Design Firms, Engineering News-Record, 2022, • Top Workplace (Small), The San Diego Union-Tribune, 2020, 2021, 2022, 2023, 2024, • Best Places to Work (Large), San Diego Business Journal, 2021, 2022, 2023, 2024, 2025 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow Us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionDescription: About Prime: Prime Residential is an established owner and operator of more than 19,000 multifamily apartments and townhomes, providing appealing amenities and superior customer service in some of the most sought-after locations along the West Coast. We are committed to maintaining a richly diverse and inclusive company culture where all people feel welcomed and valued. Property Details: The Modern has 369 units and is located in San Diego, CA. Schedule: Monday through Friday 9:00 am to 6:00 pm Target Pay: $35.28 per hour + eligible for 20% annual discretionary bonus Role Overview: The Service Manager leads the essential maintenance function at our communities, ensuring curb appeal, cleanliness, make readies, service requests, and ongoing maintenance. This role is critical in providing residents with essential services and maintaining their enjoyment of the community. You are integral to the smooth day-to-day operations and serve as a community ambassador, exemplifying our company values. The Service Manager must strategically and effectively lead a diverse team, aligning with the community management team and organizational values. Who You Are: • Technically proficient with various building mechanical components and a hands-on, advisory disposition., • Leadership-focused with high standards of excellence and a passion for mentoring and coaching team members., • Detail-oriented problem solver with a strong sense of ownership and pride in your work., • Customer service-oriented professional who remains calm and professional when addressing resident concerns., • Skilled in risk assessment and decision-making within the maintenance function, helping to minimize incidents and ensure safety., • Lead and oversee the service team, ensuring high performance and efficiency., • Conduct daily meetings and provide coaching and mentoring to the team., • Organize and lead training sessions in partnership with the Maintenance Training Manager., • Collaborate with the Community Director on personnel performance, operations, and budget., • Foster a customer-focused culture of respect, responsiveness, and efficiency., • Manage and complete service requests and prepare vacant apartments., • Diagnose and repair building components such as appliances, electrical systems, plumbing, and HVAC (with proper certification)., • Regularly inspect apartment homes to maintain standards., • Ensure the quality of work performed by contractors and service providers., • Conduct routine property inspections to identify and address safety concerns., • Perform routine fire and life/safety inspections and annual unit inspections., • Oversee the appearance and cleanliness of grounds, common areas, and amenities., • Maintain proper work area conditions and adhere to safety protocols., • Lead safety meetings, ensure SDS accessibility, and stay current with OSHA regulations., • 5+ years of related experience in residential property maintenance., • 2+ years of leadership experience overseeing a maintenance team., • Valid driver’s license for operating community vehicles and/or golf carts., • Multi-Family housing experience is preferred., • Competency in RealPage/OneSite or other property management software is preferred., • Generous Benefits: Comprehensive medical, dental, vision, and RX plans., • PTO: Standard PTO plus 11 company holidays, 2 floating holidays, 1 birthday day-off, and 1 volunteer day-off., • Retirement: 401k match up to 4%., • Tools Provided: Service team members are provided with tool kits., • Career Growth: Prime Academy provides various development opportunities by position including foundational skills, technical skills, leadership essentials, and more., • Education: Tuition reimbursement for continuous learning. Privacy Notice: At Prime Residential, we celebrate and support diversity for the benefit of our employees, our business, and our community. Prime is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Prime is also committed to compliance with all fair employment practices regarding citizenship and immigration status and, where applicable, pursuant to the San Francisco Fair Chance Ordinance, we will consider qualified applicants with arrest and conviction records. Regarding Prime Residential's Compensation Philosophy: The pay range for this position refers to what we reasonably expect to compensate for this role. Individual compensation is based on various factors, including experience, education, skillset, and geographic location. The specified range is reflective of the intended regional labor market.

Job Description Pipefitter (San Diego, CA) Lead Marine San Diego Full Time $28.00-$32.00 per hour Lead Marine has immediate openings for Journeymen Pipefitters for the Shipyard Industry here in San Diego. This Pipefitter job will be working on Naval Bases & Shipyards. DBIDs badge in hand is a plus. Pay is dependent on skills and capability. Qualified candidates please apply now! Responsibilities: • The pipefitters will be responsible for removing, repairing, targeting, laying out, fabricating and testing marine piping systems such as auxiliary salt water, fire main, potable water, hydraulic, compressed air, fuel, oil, engine exhaust in accordance with NAVSEA/Military standards and drawings., • Run lines and leads required to accomplish work and accomplish drop test if using flammable or oxygen depleting gases., • Repair and fabricate by using various shop equipment such as table saws, pipe threading machines, bending machines (power and hand), drill presses and brazing equipment., • Must be able to pass a blueprint test and brazing test. Requirements: • Pipefitters must able to read and interpret marine blueprints, drawings and schematics., • Pass and preform Silver Brazing on Copper Nickel, • Must have a comprehensive knowledge of ship repair terminology and ship compartment., • Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting. Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description Outside Machinist Mechanic (San Diego, CA) Lead Marine San Diego National City, CA, USA Full Time Must be open to 1st Shift (6:00am – 2:30pm) or 2nd Shift (3:00pm – 11:30pm) Lead Marine has immediate openings for Marine/Navy Mechanics in the San Diego Naval Shipyard Industry. Must have navy repair/marine mechanic or prior military experience. Must be DBIDs Badge eligible to gain access to Naval Bases. Responsibilities: • Must have at least 4 years of naval ship mechanical experience, preferably on fire suppression systems and damage control systems., • Install, adjust, set and repair or replace various control. Regulating or safety devices such as meters, gauges, valves, governors and automatic alarms. Test or assist in testing of shipboard machinery., • Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines., • Must have knowledge of NAVSEA Standard Items applicable to position, • Manage and ensure that daily required tasks are completed on time and in a safe manner., • Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., • Install new power and lighting circuits. Requirements: • Prior Naval experience a plus, • Utilize smart device applications to manage / schedule inspection documentation., • Complete all required paperwork and upload to database., • Document required deficiencies and items required for repair., • Must be able to read and interpret blueprints, drawings and schematics., • Valve & auxiliary maintenance/repair, • Candidates must be able to work as part of a team and may be asked to work weekends and overtime. Benefits: • Health insurance, • Paid holidays, • Paid sick leave To see a list of more available jobs, please visit Company DescriptionOur mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients. Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. Our success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.Our mission is to be the Best In Class manpower support company by operating on the principals of delivering the highest level professionalism, integrity, honesty, and safety to our valued employees and clients.\r\n\r\nLead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees.\r\n\r\nOur success in consistently filling our customer's orders is directly related to the tenure of our sales and recruiting staff, all of whom on average have in excess of 10 years industry experience.\r\n\r\nLEAD is proud to be an Equal Opportunity and Affirmative Action Employer. \r\n\r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job Description POSITION SUMMARY: At Rock Academy, substitute teachers play a vital role in nurturing students both academically and spiritually, embodying Christ-centered values in their educational practice. Substitute teachers uphold classroom management and implement prepared lesson plans during the absence of regular teachers, ensuring continuity in students' learning experiences aligned with the school's mission. Substitute teachers have a profound impact on the lives of their students. When a teacher has a planned or unplanned absence, we rely on a skilled substitute to fill in. In this role, the substitute will cover for an absent full-time teacher, adhering to the day's lesson plan and ensuring that students have a fulfilling learning experience. The ideal candidate will have substitute-teaching experience and an ability to lead classrooms effectively. The most qualified and successful substitutes can count on consistent work throughout the district. RESPONSIBILITIES: Substitute teachers are integral to maintaining educational continuity when regular teachers are absent. They are responsible for executing lesson plans provided by classroom teachers, fostering a safe and productive learning environment, and adhering to school policies and procedures. Key responsibilities include: * LESSON PLAN EXECUTION: Implementing lesson plans effectively to meet educational objectives as outlined by the absent teacher. * CLASSROOM MANAGEMENT: Maintaining discipline and promoting a positive learning atmosphere conducive to student engagement and growth. * EMERGENCY PROTOCOLS: Familiarizing oneself with and adhering to school emergency procedures, including fire drills and lockdowns, to ensure student safety. * RECORD KEEPING: Recording student attendance, lesson plan progress, disciplinary actions, and positive developments to provide feedback to the regular teacher. * ADDITIONAL CLASSROOM SUPPORT: Assigning homework, supplementing lesson plans with relevant activities, and supporting students' academic needs as required. QUALIFICATIONS: * EDUCATION: Bachelor's degree (B.A./B.S. or greater) from an accredited institution in education or a related field. Candidates authorized to work in the US. * EXPERIENCE: Preferred three years of experience in education, with substitute teaching experience highly valued. California teaching credential is preferred but not required. * SKILLS: Effective communication skills both orally and in writing, ability to work with diverse student backgrounds, and proficiency in technology relevant to classroom instruction. Ability to establish and maintain cooperative and effective working relationships with others. PERSONAL QUALITIES: Rock Academy values educators who are dedicated to serving Christ and nurturing students in faith and academics. As such, substitute teachers are expected to: * SPIRITUAL COMMITMENT: Teachers at Rock Academy desire to serve the Lord Jesus Christ through the education of their students. Each believing God has saved and called them to the task of teaching, they seek to reflect and reveal Christ to their students. In faithful living, teachers are expected to: • Demonstrate a personal commitment to Jesus Christ and maintain an active devotional life., • Have a regular and active devotional life, • Practice love, joy, patience, kindness, self-control, gentleness, faithfulness, and truthfulness, • Model biblical principles, in and out of the classroom, • Be humble in spirit but bold in Christ-like practice CHARACTER: Model biblical principles such as love, joy, patience, kindness, self-control, gentleness, faithfulness, and truthfulness in their professional and personal conduct. * PROFESSIONALISM: Uphold humility and boldness in practicing Christ-like values both inside and outside the classroom, serving as positive role models for students. PHYSICAL REQUIREMENTS: Regular duties include sitting, standing, walking, operating computers and office equipment, and occasionally lifting and moving up to 25 pounds. COMPANY OVERVIEW: Rock Academy builds leaders who are deep thinkers, dynamic communicators and do something Christians prepared for college and life. Job Posted by ApplicantPro

Job Description Position Overview As a Maintenance Engineer, you will be responding to a wide array of engineering needs and interacting directly with guests. Your responsibilities will include, but are not limited to, performing preventive maintenance, responding to guest repair requests, and maintaining inventory. Your duties will entail troubleshooting various maintenance issues in a timely and professional manner to ensure we provide the best services to our guests. This role is best suited for someone who enjoys a balance of independent work and team coordination, thrives on problem-solving, and takes pride in keeping facilities at their best. Key Responsibilities Troubleshoot and perform repairs in areas such as HVAC, plumbing, electrical, carpentry, and mechanical systems Respond quickly and professionally to guest maintenance requests and internal work orders Conduct daily property walk-throughs and complete duty round checklists, addressing issues as needed Perform routine and preventive maintenance to ensure optimal operation of equipment and building systems Maintain cleanliness and safety of maintenance spaces, work areas, and any impacted guest/public areas during repairs Install, maintain, and repair appliances, light fixtures, door hardware, and more Check and maintain safety systems (fire alarms, emergency lighting, ventilation systems, etc.) Support outdoor upkeep: maintain trash areas, assist with minor landscaping tasks Build and maintain relationships with vendors and contractors for external support when needed Communicate effectively with the Director of Engineering and General Manager regarding major repairs or safety concerns What We're Looking For Prior experience in hotel or property dwellings maintenance Working knowledge of HVAC, electrical, plumbing, and general maintenance best practices Comfortable using hand tools, power tools, and reading technical manuals or schematics Excellent problem-solving skills and attention to detail Ability to work independently with minimal supervision, and as part of a team Strong communication and interpersonal skills Physical ability to lift up to 50 lbs, climb ladders, and perform duties in a variety of indoor/outdoor settings Additional Details This position requires working weekends, holidays, or variable shifts based on business needs. The statements listed are intended to represent the key duties and level of work being performed. They are not intended to be a comprehensive list of all activities, duties, responsibilities, or qualifications of the job. Activities, duties, and responsibilities are therefore subject to change and new ones may be assigned at any time, with or without notice. We are an equal opportunity employer and make employment decisions without regard to membership in any protected class. Those who are ineligible to work in the United States and provide current legal I9 documentation will not be considered

Job Description About Bartell Hotels: Bartell Hotels is San Diego's largest independent hotel owner-operator with a sharp focus on employees, customers and community. This diverse collection of properties reflects Southern California's natural beauty, love for active lifestyles and exceptional hospitality. Our hotels combine classic and modern design, farm-to-table restaurants and energized bars, three beautiful marinas and the iconic Humphreys Concerts by the Bay entertainment venue. Our Culture: At Bartell Hotels you will find a team of incredibly friendly people who are committed to exceeding guest expectations every day. The Bartell Hotels culture emphasizes respect, pride, teamwork and development. When you work at Bartell Hotels, you are encouraged to think entrepreneurially, and you are empowered to perform and show leadership in ways that can help advance your career. We often look within to promote deserving colleagues at all levels. Bartell Hotels embraces colleague diversity, inclusion and equity, and is firmly committed to respecting and appreciating each colleague. Bartell Hotels is an equal opportunity employer. Primary Objective of Chief Engineer Position To provide our guests and team members with a secure, comfortable environment by managing ongoing preventative maintenance programs and ensuring that all-mechanical systems are operating in accordance with the standards of Bartell Hotels Responsibilities • Maintains hotel in accordance with maintenance schedule by assigning and supervising maintenance staff, • Schedules complete workweek coverage while remaining within budgeted guidelines, • Coordinates and prioritizes the distribution of repair-maintenance orders and planned-maintenance orders, • Checks and monitors the completed work in order to ensure it is completed, • Develops preventative maintenance schedule for all equipment in all departments such as laundry, kitchen, swimming pool etc., • Completes preventative maintenance schedules for equipment in the building including chillers, cooling towers, air handling units and fans, pumps, automatic control systems etc., • Ensures that equipment is operated effectively and efficiently by directing and supervising the operation of all running equipment, • Maintains routine reports by recording daily meter readings and interpreting daily log sheets, • Ensures that all the applicable requirements are being complied with by maintaining contact with local authorities such as fire brigade, electricity suppliers, and the Health Department, • Leads our Risk Management Program, becoming familiar with all policies and procedures and improving as needed, • Improves the effectiveness and efficiency of the operation of the department and/or hotel whenever possible, • Maintains safe working conditions within department and hotel, insuring that all employees follow safety rules and procedures, • Utilizes leadership skills and motivation techniques in order to maximize employee productivity and satisfaction of direct reports Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl as well as lift and/or move up to 100 pounds. The employee is sometimes exposed to outside weather conditions and frequently exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud

Job Description Community Manager (Permanent Supportive Housing - PSH) Cypress | San Diego, CA Who We Are: Founded in 1975, CONAM Management operates in 10 states, across 26 key metropolitan markets, supporting over 60,000 apartment units of both affordable and conventional housing. Our growing team of over 1,700 associates is dedicated to maintaining and enhancing the quality of life for our residents. At CONAM, we foster a collaborative, team-oriented culture where our associates thrive and are valued for their expertise and commitment. What We Are Looking For: We are seeking a PSH Community Manager to oversee the operations and management of our affordable apartment community at Cypress in San Diego, CA. As the Community Manager, you will play a critical role in maintaining high standards of resident satisfaction, apartment maintenance, marketing and financial performance for this affordable property. This is a full-time position with full benefits. Pay range: $27.00 - $30.00 per hour Key Responsibilities: • Oversee daily operations of an affordable multi-family apartment community, ensuring the property remains a safe, well-maintained, and welcoming environment for all residents., • Lead, mentor, and supervise on-site apartment staff, providing guidance on customer service, leasing, and resident relations to ensure the apartment community operates smoothly., • Manage the leasing process for the community, including marketing available units, conducting tours, processing applications, and executing leases for new residents., • Ensure the financial performance by creating and maintaining budgets, preparing monthly financial reports, and monitoring expenditures., • Conduct regular inspections (interior and exterior) to ensure the community is well-maintained and ensure compliance with company and regulatory standards., • Administer resident programs and services, focusing on building a strong apartment community and maintaining high resident satisfaction., • Oversee renovations, including interior and exterior updates, ensuring projects are completed on time and within budget., • Ensure compliance with housing regulations, • Handle resident concerns and complaints professionally, striving to resolve issues quickly and fairly., • Prepare and submit annual operating budgets and conduct quarterly budget reviews., • Maintain records for all resident transactions, including move-ins, move-outs, rent collections, and renewals., • Foster a team-oriented environment, working closely with corporate leadership and staff to achieve community goals for the complex., • Develop and maintain productive relationships with community neighbors, including police and fire departments., • Respond to and provide relevant information/reporting of emergencies or crises within the community including but not limited to mental health, conflicts resolution, and incidents of violence or substance abuse. Work closely with relevant agencies and authorities to ensure the safety and well-being., • Develop of maintain productive relationships with ownership groups, and supportive housing agencies., • Effectively work with case workers to resolve resident issues while maintaining confidentiality and abiding by local, state, and federal laws in property management., • Comply with property-specific requirements for supplemental documentation. Ensuring all corresponding programs receive supplemental documentation and approvals as outlined in the programs offered at your location., • Maintain monthly, weekly, daily reporting with Senior Management and Ownership group as outlined by property programs., • Crisis Intervention: Be prepared to respond to emergencies or crises within the community including mental health, conflicts resolution, and incidents of violence or substance abuse. Work closely with relevant agencies and authorities to ensure the safety and well-being of residents. Who You Are: (Requirements of the Position) • You have 2-3 years of experience in property management, specifically in supervising and managing affordable apartment communities., • Experience with Permanent Supportive Housing (PSH) housing is required., • You have hands-on experience in overseeing the daily operations of a multi-family apartment community, with strong leadership skills., • You have a strong understanding of financial reporting, budgeting, and rent collections specific to apartment communities., • You are proficient with property management software, such as Yardi and/or MRI, particularly in managing apartment records and financials., • You have excellent communication skills (both verbal and written), with the ability to effectively engage with residents, staff, and vendors., • You possess strong organizational skills and attention to detail when managing operations., • You are passionate about delivering top-tier customer service and fostering a positive community for residents., • You are physically able to lift and carry items weighing up to 25 pounds. Our benefits include: • Medical, dental, vision insurance, • Pet insurance, • Life insurance and identity theft protection, • Paid sick and vacation time, • 401(k) plan with company match, • Flexible Spending Accounts (FSAs), • Employee Assistance Program (EAP) Additional Information: • This position is contingent upon passing a background check, employment verification, drug screening and valid driver’s license and auto insurance., • CONAM will consider qualified applicants with criminal histories in a manner consistent with the requirement of the law. Pay Bands: Pay bands are established based on geographic location, internal equity, market conditions, and candidate qualifications. We provide competitive compensation based on experience and qualifications.

Job Description At TURN our mission is Improving Lives. Our organization embraces the tenets of client-centered care, and our core values Integrity, Diversity, Mentorship, and Inclusion are at the forefront of everything we do. We hire exceptional individuals seeking meaningful opportunities in a purpose-driven environment. JOB SUMMARY The Facilities & Real Estate Manager is responsible for managing the company’s facilities operations and real estate portfolio, with a primary focus on lease administration, transaction execution (including exits), operational reliability, and construction oversight. This role ensures safe, compliant, and cost-effective workplaces while supporting strategic planning for future growth. Responsibilities Real Estate & Lease Management • · Administer all leases: track critical dates, ensure compliance with terms, and manage renewals, expansions, and terminations., • · Lead lease negotiations for new sites and renewals, including rent structure, TI allowances, and restoration clauses., • · Manage exit transactions: coordinate decommissioning, landlord walkthroughs, and vendor closeouts., • · Act as Owner’s Representative for renovations, tenant improvements, and facility upgrades: manage scope, schedule, budget, and risk., • · Oversee design reviews, permitting, and compliance with building codes and safety standards., • · Oversee preventive maintenance programs for building systems (HVAC, electrical, life safety)., • · Manage work order process and vendor performance through CMMS; ensure SLA compliance., • · Ensure regulatory compliance (OSHA, fire/life safety) and maintain emergency preparedness plans., • · Develop and manage operating and capital budgets for facilities and real estate., • · Provide monthly reporting on lease obligations, maintenance KPIs, and project status., • · Partner with Finance, Legal, and business units to align real estate decisions with organizational goals., • · Select and manage vendors; enforce SLAs and performance scorecards. Required: · 7+ years in facilities management and/or corporate real estate with multi-site responsibility. · Experience negotiating leases and managing transaction processes. · Proven track record as Owner’s Rep or project manager for construction/renovation projects. · Strong knowledge of compliance standards and building systems. · Proficiency with CMMS and KPI-driven operations. Preferred: · Certifications: IFMA CFM/FMP, BOMI RPA/FMA, PMP, LEED GA. · Familiarity with IWMS/CMMS platforms and space planning tools. · Experience with sustainability initiatives and energy management. These physical demands represent what must be met to successfully perform the essential functions of this position. As mentioned above, reasonable accommodation may be made for qualified disabilities. ☒ Seeing ☒ Hearing ☒ Speaking ☒ Stooping/Bending ☒ Working in cramped spaces ☒ Moving around facility ☒ Moving between offices/clients ☒ Driving ☐ Climbing ☒ Lifting/carrying heavy items ☐ Pushing/pulling/dragging items ☐ Standing for long periods ☐ Working outside/underground ☒ Using hands/fingers ☐ Sitting for long periods I can perform the above functions: ☐ Without accommodation ☐ With accommodation. If so, please specify: OTHER DUTIES This job description isn’t a comprehensive list of activities, duties or responsibilities required for this job. Duties, responsibilities and activities may change at any time with or without notice. Employee signature constitutes an understanding of the job requirements, essential functions, and duties. TURN is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), gender, gender expression, gender identity, sexual orientation, marital status, medical condition, military or veteran status, national origin, race, religious creed, and sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions.

Job Description Job title: Dental Assistant Reports to: Director of Clinical Operations Status: Full-Time Location/s: National City 2835 Highland Avenue, National City, CA 91950 The Organization Operation Samahan (OpSam Health) is a Federally Qualified Health Center (FQHC) that serves the San Diego County community. Founded in 1973 in a barber shop in Downtown San Diego by Filipino health professionals offering services to immigrants who did not have the finances, linguistic skills, or ability to navigate the health care system. Today, Operation Samahan has evolved into a diverse community health center with services available in National City, Mira Mesa, City Heights, and Rancho Penasquitos. We provide primary care, dental, behavioral health, family planning, integrative health and wellness, healthy eating, civic engagement, and other health-related services to the uninsured, underinsured, and underserved families of all income levels, regardless of their ability to pay. JOB PURPOSE Prepare the patient for the determined treatment and assist the dentist in performing treatments. Prepare materials and equipment for treatment and have them ready for the dentist's use. Take x-rays and assist the dentist in laboratory work. The Dental Assistant is also responsible for sterilizing, preparing, and controlling the inventory of dental instruments and supplies. ESSENTIAL DUTIES AND RESPONSIBILITIES Administration: • Assist patients in resolving minor difficulties, answering their questions, and giving directions to patients as authorized by the dentist., • Serves as dentist's chair-side assistant., • Prepares operatory for patient treatment as per Dental Department protocols and the dentist’s directions., • Takes digital dental radiographs in accordance with state regulations and law as well as Dental Department directives and protocol., • Performs independent procedures as delegated and directed by the dentist in accordance with state regulation and law and the Dental Department directive and protocol., • Process, pull, and file patient charts as required., • Receives and places necessary telephone calls consistent with professional matters, clinic business, and patient care of the Dental Department., • Assists with various clinical and administrative functions of the center as appropriate and as time permits., • Insures the sterility of all reusable dental instruments and equipment in accordance with Dental Department directives and protocol., • Insures the proper disposal of all contaminated or potentially contaminated materials in accordance with Dental Department directive, center policy as well as state and federal regulation(s)., • Performs all functions in full compliance with the center's and the Dental Department Exposure Control Plan including but not limited to the use of Personal Protective Equipment and Universal Precautions., • Participates in appropriate health promotion/disease prevention activities, both on-site and off-site as required., • Responsible for personal compliance in full with all applicable federal, state, local, and center rules, regulations, protocols, and procedures including but not limited to the participation of a Dental Assistant in the provision of clinical dental care, as well as those relating to, but not limited to personnel issues, workplace safety, public health and confidentiality. Maintenance: • Maintains Dental Department euipment in accordance with the manufacturer's directions and Dental Department policy and protocol., • Maintains all Dental Department areas in compliance with Dental Department directives and protocols as well as center policies and procedures relative to infection control exposure control and safety issues., • Maintains adequate operatory supplies and compiles a list of individual item shortages for inventory control and ordering purposes., • Maintains a list of all Dental Department patients monitors patient flow and assists the Dentist in assuring that all patient records and documents are properly and accurately completed and filed. Quality Management: • Contribute to the success of the organization by participating in quality improvement activities. Customer Relations: • Maintain professional working relationships with all levels of staff, clients, and the public., • Be a team player and cooperate in accomplishing department goals and objectives. Safety: • Maintain current knowledge of policies and procedures as they relate to safe work practices., • Follow all safety procedures and report unsafe conditions., • Know the location of the nearest fire extinguisher and emergency exits. HIPAA/Compliance: • Maintain privacy of all patient, employee, and volunteer information and access such information only on a need-to-know basis for business purposes., • Comply with all regulations regarding corporate integrity and security obligations. Report unethical, fraudulent, or unlawful behavior or activity. QUALIFICATIONS Knowledge, Skills, and Abilities: • Excellent communication skills and be able to listen to the patient's concerns and problems with interest and empathy as well as being able to articulately explain any problems to management., • Must have a high level of organizational skills., • Ability to develop and maintain positive interpersonal relationships with a variety of people., • Complete many different duties, often changing from one task to another of a different nature without loss of efficiency or composure., • Must be able to work under stress when confronted with critical or unusual situations., • Must be able to follow instructions explicitly., • Demonstrates ability to exercise analytic ability and use sound judgment. Required Education and Certifications: • High School Diploma, • Dental Assistant Certificate including the following:, • Pit and Fissure Sealant, Coronal Polishing and Ultrasonic Scaling Certification., • Proof of completing the radiation safety course, • 3 CE Units OSHA and Infection Control, HIPAA (every 2 years), • Current CPR certification (every 2 years) Other Requirements: • Have reliable transportation; a clean driving record, and car insurance as required by the state, • Multilingual preferred PHYSICAL DEMANDS • Normal office and dental center environment., • Prolonged sitting or standing may be required., • Physical movements and the degree of mobility, manual dexterity, and hand-eye coordination normally associated with dental assisting in general practice dentistry will be performed on a repetitive basis., • The ability to distinguish letters and symbols as well as the ability to utilize telephones, computer terminals, and copiers is required., • Work under stressful conditions as well as irregular hours may be required. $21.00 – $30.00 per hour based on experience and registration status

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $31.02 - $44.31 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG, and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD, and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics The Pipe Welder is responsible for welding of various piping systems, sizes, and materials onboard ships; work in confined spaces and tight areas; assist pipefitter with fit up and installation of various piping systems and sizes.; must be familiar with the requirements of welding high pressure piping systems (using and understanding PCP’s); work from details, references, drawings, and specifications to ensure that final product meet quality requirements. • Complies with all Environmental, Health, Safety, and Security Policies and Procedures, • Demonstrates the highest standards of professional and ethical behavior, putting the company values and commitments at the forefront of decisions and actions., • Fosters openness and early detection of ethics, compliance, and contractual issues to support early intervention of nonconformities and/or compliance violations., • Fulfills all training and development activities in accordance with designated deadlines., • Contributes to the development of subordinates within the work group., • Ensures the quality standards are adhered to by him/her and other subordinates within the work group., • Evaluates blueprints, schematic drawings and job specifications to determine work demands., • Operates cutting torches, straightening presses and hand tools to redesign, reshape, and dismantle components and parts., • Assemble and install metal pipes and pipe fittings for stainless and carbon steel projects., • Removes slags and rough spots from workpieces by operating grinders or scrapers to ensure smooth work surface., • Employs their knowledge of metallurgy to determine materials and equipment most suitable for a welding project., • Cleans and prepares workpieces using chemical solutions etc. to remove foreign matter such as grease, rust etc., • Ensures the proper set up of tools, welding equipment, and gases., • Accomplishes all required stages of welding, burning, etc., • Assists pipefitters in the installation of pipe., • Ensures daily clean-up of work site at end of each shift., • Performs other related duties as assigned.Minimum Requirements, • Demonstrated knowledge of welding procedures, various types of welding equipment, proficient in flat, vertical, overhead, and horizontal welding; GTAW welding and air-arc skills., • The ability to read and understand basic work specs, drawings, and diagrams., • Demonstrated knowledge of ship board piping systems., • Demonstrated ability to identify different piping systems based off of abbreviations commonly used onboard the ship., • Demonstrated knowledge of MIL-STD-22D and NSTP-278., • Demonstrated welding capability encompassing C/S (carbon-steel) pipe and CuNi (copper-nickel) test in all 6G positions, must be able to acquire certification to operate high reaching equipment., • Maintains fire-watch qualification., • High School diploma or equivalent preferred., • Three (3) years’ experience in welding or completion of welding school.Physical Requirements, • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment., • May be exposed to fumes and irritants including welding/burning fumes, paints, oils, greases and various cleaning solutions and solvents, noise, high heat and humidity hazards while wearing the required Personal Protective Equipment (PPE)., • Frequently moves throughout the shipyard., • Work at heights and in confined spaces., • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces., • Must be able to move heavy equipment and boxes, weighing up to 40 pounds. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues Online:

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionWater Damage Restoration Technician/Laborer - Entry Level WelcomeSan Diego's Premier Restoration Company | 30+ Years Experience | Immediate Hiring Position Overview Join our growing team as a Water Damage Restoration Technician and Restoration Laborer! We specialize in water damage restoration, fire damage repair, mold remediation, and emergency restoration services. No experience required - we provide comprehensive on-the-job training and professional development. What We DoCertified Restoration Mission is San Diego's leading disaster restoration company, serving residential and commercial clients with: • Water damage restoration and flood cleanup, • Fire damage restoration and smoke damage repair, • Mold remediation and moisture control, • Emergency restoration services 24/7, • Perform water extraction, structural drying, and dehumidification, • Demolition of water-damaged materials (drywall, flooring, insulation), • Content cleaning, pack-out services, and debris removal, • Operate restoration equipment (air movers, dehumidifiers, moisture meters), • Vehicle maintenance and equipment care, • Job site cleanup and warehouse organization, • Inventory management and supply loading, • Follow safety protocols and OSHA standards, • Provide customer service with empathy during crisis situations What We're Looking For Required Qualifications: • High school diploma or equivalent preferred, • Valid driver's license with clean driving record, • Physical fitness - ability to lift 50+ lbs (fitness test required), • Background check clearance (FBI), • Reliable transportation and punctual attendance, • Construction experience or trades background, • Restoration industry knowledge, • Demolition or renovation experience, • Strong work ethic and attention to detail, • Problem-solving abilities and analytical thinking, • Team player with positive attitude, • Empathy and communication skills, • Desire to learn and grow professionally Why Choose Us? • Established company with 30+ years in business, • Comprehensive training program - no experience needed, • Career advancement opportunities, • Professional development and skill building, • Stable employment with growth potential, • Meaningful work helping families during disasters, • Team-oriented work environment San Diego-based - serve your local community Industry Keywords & Services:Water Damage Restoration | Fire Damage Repair | Mold Remediation | Emergency Services | Property Restoration | Disaster Recovery | Structural Drying | Water Extraction | Flood Cleanup | Storm Damage | Insurance Claims | Residential Restoration | Commercial Restoration | 24/7 Service | IICRC Certified | Construction | Trades | Entry Level | On-the-Job Training Ready to start a rewarding career in restoration? We're looking for analytical, calm, and strong problem-solvers who take pride in helping others during their most challenging moments. Apply now - immediate interviews available!

Job Description Employment Type: Full-Time | Hourly | Non-Exempt Pay Range: $28.50 - $40.71 Location: Vigor Marine CM San Diego, 1995 Bay Front Street, San Diego, CA 92113 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group company, builds on the proud legacy of Continental Maritime of San Diego (CMSD) to stand as a vital force on San Diego’s working waterfront. As a certified Master Ship Repair Contractor for the U.S. Navy, our skilled professionals have successfully completed hundreds of ship repair and modernization projects for the Navy and Military Sealift Command. We perform maintenance and modernization on all classes of major surface vessels, including CVN, CG, and DDG, as well as amphibious ships such as LHD, LHA, LSD, LPD, and auxiliary ships. Our work spans a full range of Combatant, Hull, Mechanical and Electrical, and Habitability systems, supporting the readiness and mission success of the U.S. Fleet. Position Specifics The Pipefitter is responsible for proper removal, and/or installation of various piping systems. This includes cutting, grinding, and prepping multiple sizes and material types of pipe. The Pipefitter must have the ability to read blueprints, diagrams, and sketches, and have an understanding of the different joint designs IAW with MIL-STD -22D, and basic knowledge of MIL-STD-777F, and NSTP-278. In addition the Pipefitter must be able to obtain a Silver Braze certification, and have a general knowledge of the hazards associated with opening tanks and voids, including the installation of proper blanks and plugs to obtain Gas Free status. The Pipefitter must also have the ability to accomplish all required testing (hydrostatic,operational, etc.) IAW shipboard procedures. • Complies with all Environmental, Health, Safety, and Security Policies and Procedures, • Demonstrates the highest standards of professional and ethical behavior, putting the company values and commitments at the forefront of decisions and actions., • Fosters openness and early detection of ethics, compliance, and contractual issues to support early intervention of nonconformities and/or compliance violations., • Fulfills all training and development activities in accordance with designated deadlines., • Contributes to the development of subordinates within the work group., • Ensures the quality standards are adhered to by him/her and other subordinates within the work group., • Plans, prepares, installs, and maintains ship board piping systems., • Consults blueprints, work orders, schematics, or instructions; creates working procedure based on specifications., • Gathers equipment and materials for the job., • Installs various types of insulation and pipe covering; safely removes and properly discards of old coverings according to hazardous waste procedures and in accordance with company procedures., • Inspects pipes, testing for pressure and leaks; reports and/or resolves problems., • Maintains records, including safety logs and inspection details., • Targets piping in shop for re-installation onboard the ship., • Ensures daily clean-up of work site at end of each day., • Performs other related duties as assigned. Minimum Requirements, • The ability to read and understand basic work specs, drawings, and diagrams., • Demonstrated knowledge of ship board piping systems., • Understands ship board terminology utilizing MIL-SPEC and NAVSEA references., • Demonstrated understanding of basic reading and mathematics is required for fit-up, lay-out, and fabrication of piping systems., • Demonstrated ability to identify multiple types of fittings, and what they are used for., • Demonstrated ability to identify different piping systems based off of abbreviations commonly used onboard the ship., • Demonstrated understanding of TAC numbers used to identify locations throughout the ship., • Maintains a silver braze qualification for CuNi (copper-nickel) piping systems onboard ships., • Maintains fire-watch qualification., • High School diploma or equivalent preferred., • Minimum (5) years experience in Shipyard Pipifitting.Physical Requirements, • Frequently moves throughout the shipyard., • Work at heights and in confined spaces., • Must be able to ascend/descend stairs/ladders/ramps, aboard ships in shipyards under industrial conditions and in confined spaces., • Must be able to move heavy equipment and boxes, weighing up to 40 pounds., • May be exposed to rapid changes in microclimates, industrial processes, and other environmental factors while collecting data, providing direction, and observing performance of task teams., • Most work is performed aboard ships or in industrial conditions. Shop, shipboard, warehouse, industrial environment. Our mission is accomplished through unwavering commitment to the following principles: • Teamwork, • Professional Conduct, • Integrity, • Total Quality, • Customer Satisfaction, • Open, honest communication at all levels, • Awareness of environmental issues Online:

Job DescriptionLooking for resumes to place in proposals. Should the proposal(s) be successful, then we will discuss terms for hiring. The resumes are for the following positions: • Civil Engineer, PE, • Structural Engineer, PE, • Mechanical Engineer, PE, • Fire Protection Engineer, PE, • Electrical Engineer, PE, • Environmental Engineer, • Cost Engineer, CCE or CCC, • Security Engineer, • Controls Engineer, • Weapons Safety Engineer This is a remote position.

Job Description CHIEF ENGINEER The Chief Engineer shall have charge of the below operations and shall perform such supervisory and other duties not limited to implementation of preventive maintenance programs, inventory control, and the inspection, testing and maintenance of the fire life safety system and other life safety systems. MAJOR DUTIES AND RESPONSIBILITIES • Supervise the performance and maintenance of all mechanical, electrical and craft services, ensuring operation within design capabilities and achieving proper environmental conditions prescribed by Building Management., • Oversee and supervise the efficient operation of the facility equipment and systems., • Perform requisite daily communication with Building Management on matters relating to the services performed., • Develop operating instructions and procedures for equipment and systems., • Strive toward a goal of zero down-time in operations by virtue of reliable system performance., • Prepare operating budgets relative to the Engineering Department., • Implement and conduct training programs for operating the facility equipment and systems., • Establish and maintain periodic operational testing schedules for critical systems and equipment., • Administer an effective and accountable preventative maintenance system tailored to the facility., • Evaluate all equipment and systems operationally and provide the customer with a list of deficiency items and recommendations for improvement., • Monitor and supervise subcontracted jobs to outside concerns when it is not practical for them to be performed in-house, or as may be requested by Building Management., • Implement and monitor an effective energy conservation and management program to ensure measures are taken to keep operating costs at a minimum., • Possess the requisite licenses and permits required by local laws and ordinances to operate, repair and maintain the facility equipment and systems. Weekly fire pump license strongly desired., • Ensure that the on-site staff conforms to all local laws, codes and regulations., • In conjunction with Building Management, establish a program for the acquisition, storage and accountability of all operating materials, tools and equipment. Establish a customer approved inventory control system., • Maintain a work order system for the control and assignment of all on-call and unscheduled services requested by the customer. This system is to include the work performed, where applied, personnel assignments, time and material estimates, and authorization., • Ensure that work responsibilities are allocated properly among subordinates by developing and implementing manpower schedules and work methods and procedures that are designed to obtain low cost and efficient operation., • Establish performance standards for each phase of work, adhering to standard practices and quality levels., • Carry out policies and procedures of the customer and employer concerning safety, administrative requirements, standards, practices and work methods., • Perform any additional duties on an as required basis where such duties are within the scope of contractual limitations.

Job DescriptionDescription: Status: Position Filled — Accepting Applications for Ready Replacement Pool (RRP) consideration. Prevailance is seeking an experienced, mission-focused professional to join the Center for Security Forces (CENSECFOR) as a Waterborne Security Boat Instructor. This is a high-risk instructor role, involving both classroom and operational training. Travel may be required. Key Responsibilities: • Deliver high-risk, group-paced instruction on security boat tactics, techniques, and procedures in both classroom and underway training environments, • Navy Instructor (9502) certification or equivalent, • Certified coxswain, • At least three (3) years of documented operational security boat driving experience in one or more of the following:, • Navy Harbor Security Maritime Detachment, • U.S. Navy Coastal Riverine Forces (CRF) Detachment, • U.S. Navy Special Warfare Combatant Crewman (SWCC), • USCG Shore-Based Boat Unit or Maritime Patrol Forces operating Fast Response Cutters (FRC), Patrol Boats (WPB), or Coastal Patrol Boats (CPB), • Tactical and Leadership Experience: Minimum of three (3) years in a maritime environment with a strong background in tactical operations, boat maintenance, and Navy Force Protection boats, • Coxswain Skills: Experience with launch and recovery, open water and confined space maneuvering, high-speed tactical maneuvers, towing, and VBSS operations, • Maritime Navigation Proficiency: Skilled in maritime navigation, including knowledge of aids to navigation, rules of the road, and plotting on nautical charts, with the ability to navigate at night, • Small Boat Tactical Operations: Proficient in team organization, multi-craft formations, patrols, MIO support, live fire operations, and escort missions, with experience in risk assessments using the ORM process, • Experience in logistical movement and transportation of small craft and associated gear for over-the-road and hoisting operations, • Tactical operations planning experience using military decision-making processes, including mission coordination, concept of operations, and mission debriefing Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Job Description Summary Are you a Project Engineer with 2-5 years of experience looking to grow your career? Our client, in San Diego, stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, they are an internationally recognized leader in many of the key markets we serve. They provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environment. Duties and Responsibilities • Provide on-site technical and administrative support for construction activities., • Review and process RFIs and submittals promptly and accurately., • Track all project documents in logs and files. Maintain and update all project tracking logs consistently., • Update project plans with RFIs and supplemental instructions to ensure accurate documentation., • Assist the CM with estimating and processing change orders, including independently reviewing contractor mark-ups, checking math, verifying scope, and preparing change orders., • Provide technical and administrative support to the CM as needed., • Review design drawings to ensure compliance with project requirements., • Review certified payroll, fringe benefits, and hourly rate worksheets., • Fully manage the close-out and turnover process to ensure a seamless project handoff., • Oversee daily site operations to ensure work is performed according to project specifications and schedules., • Monitor contractor performance and adherence to safety protocols and quality standards., • Conduct regular site inspections to verify progress, identify potential issues, and recommend corrective actions., • Coordinate and facilitate site meetings between contractors, subcontractors, and the project team to resolve on-site concerns., • Maintain accurate and detailed site logs, including daily reports, weather conditions, and contractor activity., • Support enforcement of site-specific environmental and safety compliance., • Provide real-time updates on the CM's on-site activities and potential risks., • Assist in managing the punch list process, including coordinating with contractors to address outstanding items Qualifications & Requirements • Bachelor's Degree in Construction Management, Building Construction, or related field preferred, • 2+ years Minimum experience in the construction industry as a project engineer or similar, • Solar / PV experience is a plus, • Electrical experience is preferred but not required, • Prior experience working for a general contractor is a plus, • Excellent communication skills and professional attitude, • The position is on-site, in-person only, • Field experience managing a contractor is preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company Paid Holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensation

Job Description Position Overview As a Maintenance Engineer, you will be responding to a wide array of engineering needs and interacting directly with guests. Your responsibilities will include, but are not limited to, performing preventive maintenance, responding to guest repair requests, and maintaining inventory. Your duties will entail troubleshooting various maintenance issues in a timely and professional manner to ensure we provide the best services to our guests. This role is best suited for someone who enjoys a balance of independent work and team coordination, thrives on problem-solving, and takes pride in keeping facilities at their best. Key Responsibilities Troubleshoot and perform repairs in areas such as HVAC, plumbing, electrical, carpentry, and mechanical systems Respond quickly and professionally to guest maintenance requests and internal work orders Conduct daily property walk-throughs and complete duty round checklists, addressing issues as needed Perform routine and preventive maintenance to ensure optimal operation of equipment and building systems Maintain cleanliness and safety of maintenance spaces, work areas, and any impacted guest/public areas during repairs Install, maintain, and repair appliances, light fixtures, door hardware, and more Check and maintain safety systems (fire alarms, emergency lighting, ventilation systems, etc.) Support outdoor upkeep: maintain trash areas, assist with minor landscaping tasks Build and maintain relationships with vendors and contractors for external support when needed Communicate effectively with the Director of Engineering and General Manager regarding major repairs or safety concerns What We're Looking For Prior experience in hotel or property dwellings maintenance Working knowledge of HVAC, electrical, plumbing, and general maintenance best practices Comfortable using hand tools, power tools, and reading technical manuals or schematics Excellent problem-solving skills and attention to detail Ability to work independently with minimal supervision, and as part of a team Strong communication and interpersonal skills Physical ability to lift up to 50 lbs, climb ladders, and perform duties in a variety of indoor/outdoor settings Additional Details This position may require working weekends, holidays, or variable shifts based on business needs. The statements listed are intended to represent the key duties and level of work being performed. They are not intended to be a comprehensive list of all activities, duties, responsibilities, or qualifications of the job. Activities, duties, and responsibilities are therefore subject to change and new ones may be assigned at any time, with or without notice. We are an equal opportunity employer and make employment decisions without regard to membership in any protected class. Those who are ineligible to work in the United States and provide current legal I9 documentation will not be considered

Job Description No Guard Card Needed. Security experience a plus but not required. This role will be monitoring information for multiple sites for the client and making calls and notifications based on this information. Previous Customer Service Centers, Customer Service, Call Center, Monitoring Center or other related experience is preferred. Looking for great people that have great written and verbal communication skills. If you are a service minded person - Send us a resume. Great pay, great benefits and flexible schedules! The operators will be monitoring building systems to include analytics from cameras, access control systems, water leak detection, possible weather events and other activity around the property or events that are called into the room. The function of the operators will be to respond to the incident, document the response and make appropriate notifications based on the type of incident. The Global Security Operations Center (GSOC) Operator, under guidance of GSOC Supervisor, is responsible for assisting company personnel in all concerns that pertain to safety and security for the primary location located in San Diego, California and other sites on the West Coast. The individual will work in a GSOC environment, monitoring several screens. The Operator will use a variety of tools that range from access control and alarm monitoring systems to various business intelligence sources, open-source media, Internet, and in-house tools. The Operator is required to detect, analyze, and alert others of any incidents which may impact the client’s people, products, property, or brand image. These may range from extreme weather conditions, political instability, crime, terror, to technical failures. Responsibilities: • Provide customer service to our clients by carrying out safety and security procedures, site-specific policies and when appropriate, emergency response activities, • Respond to incidents and critical situations in a calm, problem solving manner, • Investigate alarms and respond by sending security patrol, or alerting Fire services or Police as needed, • Assist company employees in all concerns that pertain to safety and security, • Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles, • Possess a high school diploma or equivalent, or 5 years of verifiable experience, • Minimum of two (2) years of military, law enforcement, government, or security experience, • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. Ollivier Corp will consider qualified applications with criminal histories in a manner consistent with applicable laws., • Health insurance and 401k plans for full-time positions, • Schedules that fit with your personal life goals, • Ongoing paid training programs and career growth opportunities Company DescriptionOur culture emphasizes training, growth and teamwork. We have a great benefits package! Ollivier Corporation has been in business since 1987, and is a proven industry leader. Ollivier is a managed security provider. This means that we support all aspects of a clients security program. From security systems to security personnel, Ollivier is a trusted adviser for some of the largest companies in Southern California.Our culture emphasizes training, growth and teamwork. We have a great benefits package! Ollivier Corporation has been in business since 1987, and is a proven industry leader. Ollivier is a managed security provider. This means that we support all aspects of a clients security program. From security systems to security personnel, Ollivier is a trusted adviser for some of the largest companies in Southern California.

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionSalary: Arcetyp LLC is a growing small business that provides a broad range of consulting services to US Federal Government, US Military, and Commercial clients. Services include Management & IT Consulting, Program & Project Management, and Professional & Admin Services. We accept direct hire candidates only, W2 employee hires. We do not accept 1099 independent consultants. We do not accept staffing firms. We do not accept corp-to-corp (C2C) candidates. We can't sponsor H1B. Arcetyp LLC is looking for a Psychiatric Technician. This position is onsite and located in Okinawa, Japan. POSITION RESPONSIBILITIES: Essential Job Functions: • Inpatient Care for Acute Psychiatric and Intermediate Units., • Assist in initial intake assessments and triage interview., • Assist in counseling and orient patients to the unit procedures and policies., • Perform ward searches., • Monitor use of dangerous items., • Answer telephone calls and relay pertinent information to providers if required., • Assist in a variety of treatment modalities including but not limited to biofeedback, stress management, and group therapy., • Coordinate and perform routine training in prevention and management of assaultive behavior., • Assist with patient education., • Perform routine ward procedures for admission, discharges, and patient transfers., • Monitor patient safety; be able to do physical restraint procedures such as applying manual and mechanical restraints., • Manage agitated patients; identify and report symptoms of homicidal or suicidal patient; perform line of sight one-on-one observations., • Understand the rules of confidentiality as applies to patient and health care provider during all aspects of care; instructpersonnel in psychiatric patient rights., • Outpatient Care, • Perform ongoing risk assessment; assist in maintaining therapeutic milieu., • Transcribe physicians orders., • Foster a therapeutic relationship with psychiatric patients; observe patient progress during treatment., • Organize and facilitate patient groups and activities., • Escort patients safely on and off the unit, know the patient management for elopement risks; take patients out on field trips., • Monitor patient safety; be able to do physical restraint procedures such as applying manual and mechanical restraints., • Manage agitated patients; identify and report symptoms of homicidal or suicidal patient; perform line of sight one-on-one observations., • Maintain all records required on patients to include data entry and retrieval on CHCS and CIS computer systems., • Perform a range of diagnostic support duties which include but is not limited to drawing blood for lab studies; collect and label specimens; take vital signs; and assist the doctor in a variety of diagnostic examinations., • Understand the rules of confidentiality as applied to patient and health care provider during all aspects of care; instructpersonnel in psychiatric patient rights., • Respond to emergency situations within area of competence and initiate appropriate action and documentation (restraint calls, fire calls, and disaster situations)., • Monitor and discontinue IV fluids as directed by government supervisor if certified., • Run the outpatient front desk areas; assist patients with questions and information; offer courteous and attentive assistance., • Follow the Commands mission and values of Service, Professionalism, Teamwork, Respect, and Compassion, • Schedule patient appointments through the CHCS computer system. Coordinate and assist the Primary Care Provider incontacting patients who miss appointments., • Ensure that all records are properly maintained, constructed, and secured in a controlled access area, • Dispose of the Secondary Convenience Record after maintaining for three years., • Prepare and pull all outpatient records for scheduled appointments., • Perform End of Day processing in accordance with local instructions., • Perform psychiatric testing/screening evaluations if certified and as directed by government supervisor MINIMUM QUALIFICATIONS: • Possess a National Certification as a Psychiatric Technician from the American Association of Psychiatric Technicians., • Possess a minimum of one year of experience as a psychiatric technician within the last 2 years., • Provide two letters of recommendation written within the preceding two years from a manager, director, or direct supervisor of a Mental Health Clinic attesting to the HCWs applicable clinical skills., • Letters shall attest to the HCWs communication skills and ability to relate to patients as well as professional and other inter-personal skills among staff members and must include: name, title, phone number, date of reference, address and signature of the individual providing the recommendation. Min. Citizenship Status Required: U.S Citizenship. LOCATION: Okinawa, Japan COMPENSATION: Pay and benefits information for this position will be provided to interested candidates that apply. Arcetyp offers a package of compensation and benefits to full-time salaried employees. Pay and Benefits from our client: we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities. Arcetyp is an Equal Opportunity Employer and we highly value diversity of our workforce. We accept resumes from all interested parties and consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, sexual preference, personal appearance, family responsibility, the presence of a non-job-related medical condition or physical disability, matriculation, political affiliation, veteran status, or any other legally protected status.

Job DescriptionDescription: Kitchens for Good POSITION TITLE:?Chef?Instructor, Culinary Programming REPORTS TO: Manager of Culinary Instruction FLSA Status: Exempt LOCATION:?San Diego, CA 92101 COMPENSATION: $68,640 - $78,640 Who we are: Kitchens for Good transforms lives through culinary arts. Our California State-Certified Apprenticeship and Pre-Apprenticeship programs empower individuals impacted by trauma and barriers to employment by equipping them with technical and life skills for meaningful careers in the hospitality industry. Position Summary: The Chef Instructor will be responsible for leading?culinary?instruction both in classroom and within the kitchen for various culinary training programs offered by Kitchens for Good. The?Chef?Instructor will work closely with the Manager of Culinary Instruction, Instruction Team, Culinary Team, and Career Service Coordinators to ensure apprentices are job-ready within a learning culture that is industry-informed, trauma-informed, and learner-centered. Instruction will take place at Kitchens for Good headquarters and at various offsite locations, including the East Mesa Youth Detention Facility. Essential Functions & Responsibilities: Culinary Instruction • Assist in designing training schedule that incorporates classroom and hands-on kitchen training., • Prepare and present lesson plans using course curriculum., • Conduct hands-on cooking instruction in classroom and kitchen setting., • Provide one-on-one coaching to reinforce professional communication, conflict resolution, and team building with a trauma-informed lens., • Develop creative instructional methods to engage apprentices in the learning process., • Administer practical work readiness assessments., • Work one-on-one with participants to ensure comprehension of lessons and information., • Collaborate with training site partners to create and maintain a positive and safe learning environment. Oversee the various ordering, set-up, and cleanup needed for culinary lessons and guest presentations., • Ensure food is prepared safely, efficiently, and according to specifications or request., • Ensure kitchen runs in accordance with all applicable health, safety, and hygiene codes and standards., • Maintain food purchasing budget in accordance with established budget., • Support delivery of Food Handlers Certification course and exam administration for all apprenticeship cohorts, ensure Food Handlers certifications are completed within designated timeframe., • As needed, facilitate kitchen trials and evaluate candidates for enrollment., • Work closely with team members in the evaluation and overall assessment of each apprentice throughout the program., • Collaborate with partners and stakeholders to offer a wide range of training experiences., • Provide professional guidance when needed., • Extensive knowledge of culinary methods, • Strong Presentational Skills, • Collaboration Skills, • Communicate professionally and effectively, • Initiative/Self-Motivated, • Results Driven, • Organizational Skills, • Growth Mindset, • Willingness to learn and apply best practices in adult learning strategies This job operates in a kitchen environment, housed with equipment such as an oven, stove, dishwasher, slicer, coffee machine, steamer, mixer and chef’s knives. The employee is frequently exposed to heat steam, fire and noise.?? Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to stand for prolonged periods of time and, reach, lift, bend, kneel, stoop, climb, push, and pull items weighing 50 pounds or less. The position requires manual dexterity; auditory and visual skills, and the ability to follow written and oral instructions and procedures. Travel: Employee may be expected to travel across Kitchens for Good locations in San Diego, as needed for mandatory meetings, graduations, and to serve as rotating back-up instructor. Position Type & Expected Hours of Work This is a non-exempt fulltime position. Scheduled hours may vary depending on training needs. Monday-Friday with some weekend/evening work when needed. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits:??? • Medical, dental, and vision coverage???, • 403(b) retirement savings???, • Professional development budget???, • 13 paid holidays???, • Generous PTO Plan? Compensation Transparency At Kitchens for Good, we are committed to?pay?transparency and equity. The base salary range for this position is provided to ensure clarity and fairness in our hiring process. The final salary offered will be?determined?based on a variety of factors, including your education, relevant experience, skills, and knowledge.?We also take into account internal equity to ensure consistency and fairness across our team. Please note that the listed range reflects the full salary potential for the role. Offers at the top of the range are not typical, as we aim to support long-term growth and advancement within the organization. Acknowledgment Qualified individuals must be able to perform the essential duties of the position with or without accommodation. A qualified person with a disability may request a modification or adjustment to the job or work environment in order to meet the physical requirements of the position. Kitchens for Good will attempt to satisfy requests as long as the accommodation needed is reasonable and no undue hardship would result. AT-WILL: The individual hired in this role will be at-will and will be subject to termination by the employee or the Company, with or without cause, with or without notice, and at any time.? AMERICANS WITH DISABILITIES ACT (ADA) STATEMENT: The Company will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please contact Juanita Atitsogbuie at 619-736-1873 or?.? To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.? EQUAL EMPLOYMENT OPPORTUNITY (EEO) STATEMENT:? The Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender or gender identity, national origin, disability status, protected veteran status or any other characteristic protected by state or federal law.? Requirements: Education & Work Experience • Culinary Arts degree and/or Associates Degree with culinary or hospitality focus highly desirable, • 5+ years of relevant industry experience at a Chef level or higher, with related management and training experience, • A high degree of technical ability to communicate information in a manner that provides a positive learning experience and instills a passion for the profession, • Administrative and technology skills?, • Ability to demonstrate concern and sensitivity toward?apprentices’?needs and learning styles, • ServSafe?Manager?certified (preferred), • ServSafe?Proctor certification (preferred), • Criminal background clearance (Probation, DOJ, FBI)?, • Drug screening?, • Tuberculosis testing

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionJob Title: Marine Preservation & Decking TechnicianJob Description We are seeking a skilled and safety-conscious Marine Preservation & Decking Technician to support U.S. Navy ship maintenance and repair projects, including aircraft carriers (CVNs). The ideal candidate will possess a strong mechanical knowledge and be comfortable working with various tools and equipment in a hands-on, labor-intensive role. Responsibilities • Install, repair, and maintain various marine decking systems such as tile, non-skid, and underlayment, ensuring proper adhesion and alignment according to NAVSEA standards., • Perform paint and coating removal using mechanical and chemical methods, preparing surfaces for preservation, including cleaning, sanding, and blasting., • Apply primers, sealants, and protective coatings as required., • Install and repair thermal and acoustic insulation (lagging) on piping, bulkheads, and machinery, ensuring compliance with fire-retardant and safety specifications., • Perform routine physical labor, moving materials, tools, and equipment, cleaning equipment, vehicles, machinery, and work areas., • Operate various tools such as pneumatic, electric, and hand tools, and perform brush roll or hand brush painting., • Transport, load, and unload materials, tools, and equipment on and off trucks and ships.Essential Skills, • Strong mechanical knowledge and experience working with various tools and equipment., • Minimum 1–2 years in marine preservation, decking, or shipyard labor roles., • Hands-on experience in decking installation and repair, surface preservation, lagging, and paint/coating removal in a shipyard or industrial marine environment., • Familiarity with U.S. Navy standards and shipboard environments.Additional Skills & Qualifications, • Must be able to obtain and maintain DBIDS access for Naval Air Station North Island (Coronado) and be a US Citizen., • Current DBIDS holders will be given priority for starting. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in National City,CA. Application Deadline This position is anticipated to close on Feb 13, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: $25.00-$32.00 DOE Commercial Fire Protection is seeking a Fire Life Safety Inspector in the Southern California area.There's never been a more exciting time to join our team! We are in an accelerated growth phase in a rapidly expanding industry and are seeking motivated, self-driven individuals looking for a long-term career. Responsibilities include testing/inspecting and servicing fire systems - including fire alarm, sprinkler, extinguishers, and other systems - to the prescribed standards; performing on-site emergency troubleshooting; programming and repairs of our customers fire alarm systems; identifying code and non-conformance issues; and preparing accurate and timely service tickets and reports. Skills/Qualifications: • 3+ year of experience in inspecting, servicing and troubleshooting fire alarms, • Familiar with NFPA codes, • High School Diploma or equivalent, • Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices, • Preferred: Level 1 Fire Extinguisher license from the state of CA, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Ability to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements, • Demonstrate a high level of customer service, strong organization skills, and positive attitude, • Maintain truck inventory to ensure timely response to customer needs., • Ability to adhere to, implement, and follow safety guidelines and procedures at all times, • Possess a valid drivers license and driving record that meets company requirements, • Pass a pre-employment background check, • Perform other duties as assigned Benefits: Commercial Fire Protection is pleased to offer a compensation package which includes: Competitive hourly rate, company paid medical & dental, vision,401k, life insurance, paid time off and holidays, supportive team environment, iPad, company vehicle & gas card,tuition reimbursement, and career advancement opportunities. All qualified applicants to Commercial Fire Protection are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic.

Job Description At TURN our mission is Improving Lives. Our organization embraces the tenets of client-centered care, and our core values People, Culture and Growth are at the forefront of everything we do. We hire exceptional individuals seeking meaningful opportunities in a purpose-driven environment. JOB SUMMARY The Facilities & Real Estate Manager is responsible for managing the company’s facilities operations and real estate portfolio, with a primary focus on lease administration, transaction execution (including exits), operational reliability, and construction oversight. This role ensures safe, compliant, and cost-effective workplaces while supporting strategic planning for future growth. Responsibilities Real Estate & Lease Management • · Administer all leases: track critical dates, ensure compliance with terms, and manage renewals, expansions, and terminations., • · Lead lease negotiations for new sites and renewals, including rent structure, TI allowances, and restoration clauses., • · Manage exit transactions: coordinate decommissioning, landlord walkthroughs, and vendor closeouts., • · Act as Owner’s Representative for renovations, tenant improvements, and facility upgrades: manage scope, schedule, budget, and risk., • · Oversee design reviews, permitting, and compliance with building codes and safety standards., • · Oversee preventive maintenance programs for building systems (HVAC, electrical, life safety)., • · Manage work order process and vendor performance through CMMS; ensure SLA compliance., • · Ensure regulatory compliance and support maintenance staff on all programs including; (OSHA, fire/life safety) and maintain emergency preparedness plans., • · Develop and manage operating and capital budgets for facilities and real estate., • · Provide monthly reporting on lease obligations, maintenance KPIs, and project status., • · Partner with Finance, Legal, and business units to align real estate decisions with organizational goals., • · Select and manage vendors; enforce SLAs and performance scorecards. Required: · 7+ years in facilities management and/or corporate real estate with multi-site responsibility. · Experience negotiating leases and managing transaction processes. · Proven track record as Owner’s Rep or project manager for construction/renovation projects. · Strong knowledge of compliance standards and building systems. · Proficiency with CMMS and KPI-driven operations. Preferred: · Certifications: IFMA CFM/FMP, BOMI RPA/FMA, PMP, LEED GA. · Familiarity with IWMS/CMMS platforms and space planning tools. · Experience with sustainability initiatives and energy management. These physical demands represent what must be met to successfully perform the essential functions of this position. As mentioned above, reasonable accommodation may be made for qualified disabilities. ☒ Seeing ☒ Hearing ☒ Speaking ☒ Stooping/Bending ☒ Working in cramped spaces ☒ Moving around facility ☒ Moving between offices/clients ☒ Driving ☐ Climbing ☒ Lifting/carrying heavy items ☐ Pushing/pulling/dragging items ☐ Standing for long periods ☐ Working outside/underground ☒ Using hands/fingers ☐ Sitting for long periods I can perform the above functions: ☐ Without accommodation ☐ With accommodation. If so, please specify: OTHER DUTIES This job description isn’t a comprehensive list of activities, duties or responsibilities required for this job. Duties, responsibilities and activities may change at any time with or without notice. Employee signature constitutes an understanding of the job requirements, essential functions, and duties. TURN is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), gender, gender expression, gender identity, sexual orientation, marital status, medical condition, military or veteran status, national origin, race, religious creed, and sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions.

Job Description We are seeking a skilled Low Voltage Service Technician II to install, maintain, and repair low voltage systems in commercial and secure environments. This role is service-focused and includes responding to client service calls across multiple system types, including nurse call, fire alarm, access control, video surveillance (CCTV), and intrusion detection systems. The technician will diagnose and troubleshoot system issues, perform repairs and replacements, provide technical support and training, and maintain accurate service documentation. Collaboration with internal teams, vendors, and customers is essential to success in this role. Key Responsibilities • Install, service, maintain, and repair low voltage systems in commercial and secure facilities, • Diagnose, troubleshoot, and resolve system malfunctions efficiently, • Repair or replace faulty equipment and components, • Respond to service calls in a timely and professional manner, • Provide technical support and user training to customers as needed, • Maintain detailed and accurate service reports and documentation, • Coordinate with internal teams, subcontractors, and vendors to resolve issues, • Hours and days may vary, • Minimum 5 years of experience troubleshooting and repairing security, nurse call, and fire life safety systems, • Experience with systems such as EST3, Lenel, and Ascom strongly preferred, • High School Diploma or equivalent, • Valid California Drivers License with proof of auto insurance, • Ability to drive 2+ hours per workday, daily, • Ability to walk, bend, stoop, hear, and speak, daily, • Ability to work indoors and outdoors in varying temperatures, • Ability to ascend/descend and work at heights above 6 feet, occasionally, • Ability to move or transport items weighing up to 20 pounds, occasionally, • Ability to work in confined spaces, occasionally, • Frequent pushing and pulling using upper extremities, • Ability to stand or sit for extended periods (4+ hours), daily, • Frequent operation of a company vehicle, • Competitive compensation, • Comprehensive benefits package, including:, • Medical, dental, and life insurance, • 401(k) retirement plan, • Paid holidays, • Paid Time Off (PTO)

Job Description Job Summary Cleans and prepares wood or metal surfaces for painting, removes dirt, grease, rust, scale and other contaminants. Masks and tapes areas not requiring paint. Paints parts, equipment and structural surfaces on interior and exterior of ships and shipyard buildings. Mixes material in accordance with Product Data Sheets. Inspects prepped and painted areas and performs touch up work as needed. Sets up spray equipment pneumatic or conventional, operating airless pumps, HVLP spray gun and five gallon conventional spray pot, for non-skid application, as well as application by phenolic roll. Dismantles scaffolding of multiple types. Cleans tanks and performs general shipyard cleanup. Inspects and sorts scaffolding materials. Operates high reach equipment and power tools. Moves furniture and other equipment as needed. Assists with all Painter, Blaster, Carpentry and Waysman tasks. Qualification Standards Must be able to hear warning signals and read and comprehend safety instructions, regulations and warnings. Must have the ability to read a tape measure and operate power tools safely. Must be clean shaven for a respirator fit (modest moustache is fine). Must have the ability to work at heights, in confined spaces, and able to work any shift. Essential Job Tasks Set up pneumatic tools and equipment at job site to conduct surface preparation. Prepare surface to be painted, including solvent wiping, masking, hand tool and mechanical cleaning. Set up spray paint equipment at job site to conduct coating application. Mix paint materials according to PDS and apply coating to surface in accordance with Ships Specification requirements. Hand paint in designated areas; inspect work for touch up. Perform general housekeeping in assigned work areas, during and at completion of work. Prepare surface and apply coating in hard to reach elevated areas. Line tends for spray operations. Dismantle scaffolds and other wooden structures, safety handrails, and other equipment. Cleans tanks and performs general shipyard clean-up. Operates paint equipment, chipping equipment and power tools such as saws, drills, and chainsaws Inspects and sorts scaffold materials. Installs fire equipment and load out material in support of ship delivery. Occasionally move furniture and other equipment. Work with Paint, Blast, & Waysman in performing cross trade responsibilities Materials, Tools Equipment, Work Aids Paint, solvents, biodegradable degreasers, masking materials, variety of cleaning materials, cleaning equipment, personal protective equipment, air respirator, full face respirator, retractable knife (NASSCO approved only) mechanical and hand tools, conventional and airless equipment. Metal, wood, scaffold sub-section, bolts, clips, pneumatic tools, high reaching equipment, painting or chipping equipment, and cleaning equipment. Office furniture, file cabinets, and dollies. Personal protective equipment required. Marginal Job Tasks Works with the General Services Department in erecting and dismantling scaffold, water evacuation, load out and grooming compartments. Works with the Blast Department in performing blast setup, recovery, blow down and final groom. General housekeeping required in work areas Physical/Mental Involvement Color vision. Frequent to continuous lifting of paint equipment; occasional lifting of up to 94 lb. paint cans. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Must be able to correctly follow roping and tying techniques. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee’s work area. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: · Industry Leading Pay · Medical Coverage · Dental Coverage · Vision Coverage · Short Term Disability Benefits · Term Life Benefits · Referral Bonuses *Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker’s compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com • Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law Pay: $18.50/hr

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Position Overview: As a Pipefitter Journeyperson, you will be responsible for the layout, fabrication, installation, repair, and testing of various marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, and Engine Exhaust systems. You will work according to specifications, NAVSEA/Military standards, and other regulatory standards like ABS and Military Sealift Command. Key Responsibilities: -Remove, repair, target, fabricate, and install marine piping systems in accordance with regulatory standards. -Use equipment such as table saws, pipe threading machines, bending machines (power and hand-operated), drill presses, and brazing equipment. -Perform blanking and pressure testing of tanks (structural boundary testing). -Interpret and follow instructions, drawings, and work item specifications. -Provide direction and guidance to helpers and improvers as assigned by the supervisor. Qualifications & Experience: -5-10 years of experience in pipefitting, with at least 6 years of experience in maritime pipefitting. -Strong knowledge of P-73 joint fit-up and Silver Brazing theory. Ability to certify in: -MT Braze (B-1) -MT Braze (B-2) -Thorough understanding of marine pipe fabrication, repair processes, and targeting. -Capable of interpreting drawings, specifications, and Navy/MSC/ABS standard items and manuals. -Proficiency in basic math (addition, subtraction, multiplication, division) and familiarity with both U.S. customary and metric measurement systems. -Physically and medically capable of wearing all required PPE, including hard hats, respirators, safety harnesses, and other safety gear as per OSHA standards. Work Environment: You will work in shipyards, aboard vessels, or industrial settings, performing pipefitting tasks on complex marine systems. The role demands precision, adherence to safety standards, and the ability to collaborate effectively with a team. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of Outside Machinists to join our team in San Diego, CA. Pay Rate: $25-35/hour Responsibilities: • Install equipment on naval vessels in a safe and productive manner., • Disassemble, fault find, repair and reassemble shipboard equipment as directed by the supervisor., • Inspection of work, identification of potential problems, initiation of corrective actions., • Increase awareness of quality procedures within department, • Ensure adherence to correct work procedures., • Continuously improve communications and flexibility within the team., • Contribute to innovation/productivity improvements., • Read technical bulletins and diagrams in relation to work being performed., • Work towards the team goal of delivering the vessel on time., • Minimum 2 years of shipyard or Naval (machinist mate) experience., • DBIDS eligibility required., • Must have reliable/own transportation., • Must be fire watch certified., • 11 panel Drug Screen, • Comfortable with heights, • Lift 50lbs without assistance, • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required., • Strong mechanical aptitude required., • Knowledge of ship terminology required., • Proven ability to interpret engineering drawings., • Demonstrated ability to safely operate all fixed and non-fixed machinery., • Ability set up machinery to meet flatness tolerance requirements., • Demonstrated ability to interpret job specifications., • Ability to perform work on marine vessels., • Must be able to follow directions and work with limited supervision. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionSalary: Arcetyp LLC is a growing small business that provides a broad range of consulting services to US Federal Government, US Military, and Commercial clients. Services include Management & IT Consulting, Program & Project Management, and Professional & Admin Services. We accept direct hire candidates only, W2 employee hires. We do not accept 1099 independent consultants. We do not accept staffing firms. We do not accept corp-to-corp (C2C) candidates. We can't sponsor H1B. Arcetyp LLC is looking for a Licensed Practical/Vocational Nurse (LPN/LVN). This position is onsite and located in Okinawa, Japan. POSITION RESPONSIBILITIES: Essential Job Functions: • Ensure patient care is carried out in accordance with the Standards of Nursing Care and the policies and procedures of the clinic., • Check patients into the clinic and triage using clinic guidelines. Inform the nurse or physician of the patients condition and potential problems., • Obtain and document patient and pertinent family history., • Perform a full range of diagnostic support duties which include taking vital signs, collecting specimens, obtaining, recording, and tracking results of diagnostic tools., • Assist the physician in a variety of diagnostic examinations such as lumbar punctures, colposcopies, and sigmoidoscopies, by preparing, positioning, and monitoring patients, and setting out and handling instruments and equipment., • Perform laboratory tests such as checking urine for sugar and stool for blood. Record and report results of test., • Ambulate patients to other areas to include Radiology, various clinics, and physical therapy., • Prepare patients for tests, examinations, treatments, and/or surgery. Collect specimens such as urine, sputum, and stool., • Label specimens for laboratoryexaminations and follow up by using CHCS/AHLTA or calling the laboratory for reports., • Alert provider to conditions which deviate from expected findings., • Prepare, start, monitor, and discontinue intravenous fluids with accuracy and in accordance with established procedures., • Observe, report and document all observed symptoms, reactions, treatments, and changes in the patient condition to the registered nurse or physician., • Make careful observations to assess that nursing procedures and treatment do not cause additional distress., • Perform routine nursing care activities such as taking blood pressures, temperatures, baths, and hygiene care, passing and removal of trays, changing of linen, and otherwise assist in the care of the physical needs of the patient., • Operate basic equipment required in delivery of patient care such as pumps, IV pumps, oxygen administration apparatus and incentive spirometers., • Execute physicians orders within the guidelines of standard nursing practice., • Ensure accurate medication is administered in correct form and dosage to the proper patient as directed by Government supervisor., • Maintain records of nursing care, dose and time of medication administered, and indicate if the medication was not administered and the reason., • Administer immunizations in a safe and accurate manner with strict adherence to all Military/Medical and DoD Treatment Facilities and CDC Immunization policies., • Recognize emergency situations and assist with, or institute emergency measures for sudden adverse developments in patients such as cardiac arrests., • Perform preoperative procedures for minor surgery and fill out pre-op checklist., • Assist patients in admission, transfer, and perform discharge planning follow-up and documentation., • Support the patient and/or family members toward the achievement of treatment plan goals., • Provide instructions to the patient on invasive procedures, surgical procedures and post-surgical conditions which were previously provided to the patient by a nurse or physician., • Instruct patients on how equipment is used such as oxygen, suction, cardiac monitor, and pulse oximeter. Instruct patients and family on use of prescribed medications, contraindications of medications, and the necessity of proper follow-up care., • Provide emotional support to patients and families., • Ensure necessary supplies are available and equipment is in functioning order., • Provide an orderly, clean, and safe environment for patients and staff., • Handle telephone information requests with courtesy, accuracy, and respect for patient confidentiality. Receive information and distribute messages, as necessary., • Ensure maintenance and assists with re-supply of pharmaceuticals in the clinic., • Ensure upkeep and perform checks of emergency equipment i.e., oxygen, emergency cart, suction apparatus, etc. and maintain appropriate logs. Inform the Charge Nurse of any discrepancy on daily checks., • Perform additional duties within the scope of LPN practice including but not limited to, update of Standards of Nursing Care, and other LPN/LVN duties required for efficient, quality patient care., • Transport patients to and from other areas of the facility to include hospital clinics and ancillary departments, as ordered by the physician., • Assist the professional nurse and/or physician with individual, group, and family health instruction in relation to the patient's condition and his/her ability for selfcare. Assist in the dissemination of appropriate literature dealing with subjects related to the particular health problems involved., • Assist in providing physical and psychological support to patients, assist in the explanation of procedures and treatment, and promote cooperation among staff, patients, and families., • Participate in executing the Emergency Preparedness Plan (drills and actual emergencies) as scheduled by the MTF (typically semiannually)., • Participate in peer review and performance improvement activities., • Participate in the implementation of the Family Advocacy Program as directed by government supervisor., • Participation shall include, but not be limited to, appropriate medical examination, documentation, and reporting., • Actively participate in the commands Performance Improvement Program. Participate in meetings to review and evaluate the care provided to patients, identify opportunities to improve the care delivered, and recommend corrective action when problems exist., • Perform efficiently in emergency patient situations following established protocols, remaining calm, informing appropriate persons, and documenting events., • Anticipate potential problems/emergencies and make appropriate interventions., • Notify supervisor, director, or other designated person regarding problems that the HCW is unable to manage., • Comply with the standards of The Joint Commission, applicable provisions of law, and the rules and regulations of any and all governmental authorities pertaining to licensure and regulation of health care personnel and medical treatment facilities, the regulations and standards of medical practice and the MTFs medical staff by laws., • Participate in continuing education to meet own professional growth., • Participate in the provision of in-service training to clinic staff members., • Provide training and/or direction as applicable to supporting government employees (e.g., hospital corpsmen, students, etc.)., • Operate and manipulate automated systems such as CHCS, AHLTA, ADS, Essentris, and Clinical Information System (CIS), participate in clinical staff Performance Improvement (PI) and Risk Management (RM) functions, as prescribed by the Commander., • Attend and participate in various meetings as directed by government supervisor., • Comply with the HIPAA (Health Insurance Portability and Accountability Act) privacy and security policies of the treatment facility., • Perform timely, accurate, and concise documentation of patient care., • Maintain documentation of all treatment provided in accordance with clinic directives and prepare such records and reports as may be required. All records and reports must be legible. Abbreviations must be only those listed in local instructions. Min. Citizenship Status Required: U.S Citizenship. LOCATION: Okinawa, Japan COMPENSATION: Pay and benefits information for this position will be provided to interested candidates that apply. Arcetyp offers a package of compensation and benefits to full-time salaried employees. Pay and Benefits from our client: we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities. Arcetyp is an Equal Opportunity Employer and we highly value diversity of our workforce. We accept resumes from all interested parties and consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, sexual preference, personal appearance, family responsibility, the presence of a non-job-related medical condition or physical disability, matriculation, political affiliation, veteran status, or any other legally protected status.