Trabajos high school part time en Houston, TexasCrear alertas

Additional Information Job Number26124801 Job CategoryFood and Beverage & Culinary Location1777 Walker Street, HOUSTON TX 77010, United States_ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY The Marriott Marquis Houston is now partnering with the Rouxbe Cooking School to offer culinary associates engaging online training opportunities to help grow their careers. Through Rouxbe's self-paced online platform and culinary training curriculum, Marriott associates with all levels of culinary experience will have access to hundreds of well-designed and visually appealing lessons they can immediately apply to their jobs. Prepare ingredients for cooking, including portioning, chopping, and storing food. Wash and peel fresh fruits and vegetables. Weigh, measure, and mix ingredients. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Operate ovens, stoves, grills, microwaves, and fryers. Test foods to determine if they have been cooked sufficiently. Monitor food quality while preparing food. Set-up and break down work station. Serve food in proper portions onto proper receptacles. Wash and disinfect kitchen area, tables, tools, knives, and equipment. Check and ensure the correctness of the temperature of appliances and food. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time or for an entire work shift. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATION Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job Description (Houston, TX): Flexicrew Technical Services (FTS) is seeking an experienced Rotating Equipment Mechanic to support the disassembly, inspection, repair, and reassembly of pumps, compressors, turbines, blowers, and other rotating equipment. This position is based full-time in Pasadena, TX and requires strong mechanical knowledge, attention to detail, and commitment to safety and quality standards. Essential Duties: • Perform unit disassembly, cleaning, inspection, and accurate collection of technical inspection data for repair proposals, • Maintain, diagnose, and repair various types of rotating equipment including pumps, gearboxes, blowers, compressors, and turbines, • Complete maintenance and repairs according to OEM specifications and customer requirements, • Prepare and complete service documentation, inspection reports, and final repair reports, • Maintain detailed daily work records and communicate findings clearly with supervisors, coworkers, and customers, • Disassemble complex rotating equipment and document failure modes and “as received” conditions, • Assist with cleaning and preparation of parts for NDT and PMI examination, • Perform dimensional and runout inspections on components using precision measuring devices, • Provide written repair recommendations, replacement part requirements, and work instructions for other crafts, • Perform quality inspections on manufactured, repaired, and customer-supplied components prior to final assembly, • Clean and prepare components for final assembly and complete assembly per OEM, ASME, API, or customer specifications, • Complete photo documentation and visual inspections of incoming equipment and spare parts, • Maintain shop equipment and ensure housekeeping standards support a clean and safe work environment, • Follow all company safety policies, procedures, and instructions at all times, • Assist with additional projects and responsibilities as assigned Requirements/Skills: • High School Diploma or GED required, • NCCER Millwright certification preferred, • Trade school mechanic certification considered a plus, • Minimum of 5–10 years of mechanic experience working on rotating equipment, • Strong knowledge of pumps, gearboxes, blowers, compressors, and turbines, • Ability to use precision measuring tools and inspection equipment, • Ability to read and interpret technical drawings, specifications, and repair documentation, • Strong organizational and problem-solving skills, • Ability to communicate effectively with supervisors, coworkers, and customers, • Must be a team player and willing to assist in training junior mechanics, • Ability to supply and use basic mechanic tools and measuring devices required for assigned work, • Valid driver’s license required, • Ability to pass pre-employment drug, alcohol screening, and background check, • Must be legally authorized to work in the United States Physical Requirements: • Ability to stand and walk for extended periods during shifts, • Ability to lift up to 50 lbs. with assistance, • Ability to climb, balance, bend, and reach overhead as required, • Manual dexterity for assembly work and use of hand and precision tools, • Ability to work around moving mechanical parts, moderate noise, and metal particles, • Must not have allergies or restrictions related to handling industrial metals including aluminum, copper, bronze, and steel Equal Opportunity Statement: *Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, or legally protected status.

Job Description Overview Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you’ve got a strong mechanical aptitude and a history of exceptional performance, you’ll thrive as a member of our team. A MECHANIC’S DAY-TO-DAY: • Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA., • You are responsible for keeping the center equipment in full working order., • Fully understand how to operate all bowling equipment in the center, • Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed., • Take charge and ensure the shop and machine area is clean and organized., • Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: • At least 1 year of Mechanical experience, • High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional), • Excellent communication skills, • Ability to train new mechanics, • Availability to work nights, weekends, holidays, and extended workdays, • Proven team player PERKS (MORE REASONS YOU’LL LOVE YOUR JOB) • Free Bowling!, • $1 Arcade Play, • 20% off Events, • 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS • Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: • Evening shift, • Night shift Weekly day range: • Weekend availability Work Location: One location Responsibilities Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world’s premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: www.bowlerocorp.com/careers/benefits

Aramark Nexus is hiring a Sous Chef for a new, large-scale food service operation near Hereford, Texas, within driving distance of both Hereford and Amarillo. This full-time culinary leadership opportunity is ideal for an experienced cook, lead cook, kitchen supervisor, or sous chef who is ready to take the next step in their career. We are looking for someone with strong hands-on cooking experience who can help lead a kitchen team, coordinate food production, maintain food safety and quality standards, and keep a busy kitchen running smoothly. As a Sous Chef with Aramark Nexus, you will work alongside culinary and food service leadership to manage daily kitchen operations in a high-volume dining environment. You will be involved in food preparation, meal production, team supervision, training, sanitation, inventory, quality control, and service execution. You do not need to have previously held the title of Sous Chef to be considered. An experienced cook or culinary professional with a strong background in food production and experience leading or training others may be a great fit for this opportunity. This is an opportunity to join a growing Aramark Nexus operation, help build a culinary team from the ground up, and grow your career with one of the country's leading food service and hospitality organizations. • Support culinary leadership in managing daily kitchen and food production operations., • Train, supervise, and support cooks and other kitchen personnel., • Coordinate food preparation, production, service, and presentation throughout assigned shifts., • Provide hands-on cooking and food production support as needed., • Help ensure food is prepared according to recipes, quality standards, production expectations, and portion controls., • Assist with estimating food needs, inventory management, requisitions, and ordering supplies., • Support recipe execution, menu implementation, and production planning., • Monitor food quality, consistency, presentation, and overall guest satisfaction., • Maintain food safety, sanitation, food handling, and kitchen cleanliness standards., • Ensure kitchen equipment is properly operated, cleaned, and maintained., • Support catering events, special meals, and additional food service needs as required., • Train and coach kitchen team members on cooking techniques, recipes, safety procedures, and production standards., • Partner with culinary and food service leadership to support staffing, labor, inventory controls, and daily operational needs., • Help create a positive, safe, and accountable kitchen culture focused on teamwork, quality, and service. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Aramark Nexus supports large-scale workforce communities and complex projects in locations where housing, dining, facilities, and essential services are critical to keeping people and operations moving. Our teams bring together Aramark's experience and resources with an entrepreneurial approach built for fast-moving, high-growth environments. A career with Nexus offers the opportunity to help build something from the ground up. Team members work in unique operating environments, take on meaningful responsibility, and have opportunities to grow as Nexus expands into new projects and markets. If you enjoy being part of a team that moves quickly, solves problems, and takes pride in delivering a great experience for the people we serve, Nexus offers a different kind of Aramark career. Location and Future On-Site Housing This position will support a new project located near Hereford, Texas, within driving distance of both Hereford and Amarillo. Additional details regarding the specific work location will be shared with candidates as they move through the hiring process. As the project develops, free on-site room and board is planned to become available for eligible employees. This will include housing and meals provided at no cost, creating an option for employees who prefer to live closer to the worksite rather than commute each day. Additional information about housing, availability, amenities, and timing will be provided as those services become available. • Must be 18 years of age or older., • Requires 2 to 3 years of experience in cooking, culinary operations, food production, kitchen leadership, or high-volume food service., • Previous experience as a cook, lead cook, kitchen supervisor, culinary supervisor, sous chef, or similar culinary position is preferred., • Requires 2 to 3 years of post-high school education or equivalent professional culinary experience., • Culinary degree preferred but not required., • Strong knowledge of cooking techniques, food preparation, high-volume food production, kitchen operations, and food service standards., • Experience training, supervising, or directing kitchen employees in a fast-paced environment., • Ability to work hands-on in food preparation and production while also providing leadership to the kitchen team., • Ability to organize production, solve problems, prioritize work, and support daily kitchen execution., • Strong communication and interpersonal skills., • Ability to maintain food safety, sanitation, quality, portion, and presentation standards., • Experience with high-volume dining, institutional food service, residential dining, catering, hospitality, restaurants, or prepared food operations is preferred., • Ability to work collaboratively with culinary leadership, food service management, and other departments., • Schedule flexibility is required and may include days, evenings, weekends, and holidays based on business needs.

Job Description Walker Engineering is excited to announce an immediate hiring opportunity for an experienced electrical Foremen to join our team in Houston. This role is pivotal in supervising crew-level activities related to the installation, alteration, addition, and repair of electrical systems, conductors, and associated materials and equipment. For smaller construction, retrofit, or tenant finish projects, you may also serve as the primary jobsite supervisor. Qualified candidates will have both a TDLR journeyman or masters license as well as supervisory experience on large commercial electrical builds. New foreman hires are eligible for a $2,500 sign on bonus after 90 days of employment. Why Join Walker Engineering? Don’t miss this chance to build your career right here in Houston, with a company that values your expertise and rewards your hard work. Apply today to become part of the Walker Engineering team and help us shape the future of electrical construction in our Houston division! PRIMARY DUTIES AND RESPONSIBILITIES • Crew and Project Oversight: Responsible for all Walker field trades on an electrical construction crew or project., • Project Planning: Collaborates with the Project Manager to conduct a working estimate and take-off., • Work Preparation: Coordinates with the Project Manager to ensure materials, tools, equipment, information, and appropriate manpower are available and in place on time., • Work Layout and Scheduling: Lays out work for subordinate lead personnel and establishes work schedules and manpower charts. Supervision and Direction: Directs the crew in the installation of: • Electrical feeders,, • Equipment such as pumps, motors, and generators,, • Control and distribution systems (e.g., switchgear, relays, and circuit breaker panels),, • Lighting fixtures and outlets, and, • Related connections and terminations. Work Monitoring: Supervises work progress, directs crews, and adjusts schedules based on job pace and coordination with other trades. Hands-On Work: May perform tasks being supervised for production purposes or to provide instruction. Administrative Responsibilities: Manages required paperwork, including: • Official forms,, • Daily reports,, • Time sheets/tickets, and, • Safety reports. Safety Leadership: • Ensures crew safety and compliance with all Walker safety processes and protocols., • Trains or instructs employees on the duties they are assigned., • Investigates or assists in the investigation and reporting of any accidents or safety incidents involving jobsite employees. Position Requirements: • Minimum of an active journeyman or masters electrical license., • Possess all the skills required for lower-rated positions, including all Journeyman duties, • Licenses: Current Driver's License and reliable transportation., • Education: High School Graduate, GED, or equivalent., • Experience: Minimum of 6 years in commercial electrical work. Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This job description is subject to changes, with or without notice, based on the position's role within the business unit. \nCompany Description Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio. We have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project. Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio.\r\n\r\n\r\nWe have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc., is seeking experienced Commercial Door Technicians & Installer Trainees for commercial doors and door related products in Houston, TX and the surrounding areas. If you have experience working with commercial doors including roll-up doors, high-speed doors, door hardware, dock equipment or any similarly skilled trades in the commercial construction industry, please apply! Job Responsibilities: • Repair and/or install a wide range of commercial doors and dock hardware, including but not limited to rolling steel doors, high-speed doors, sectional doors and dock levelers/equipment, • Identify opportunities to provide customers with products and services, • Track and maintain job related paperwork and submitting in a timely manner, • Operate in safety conscious manner at all times while performing job duties, • Other duties as assigned Job Requirements: • High School Diploma/GED (Preferred), • Prior experience in a similar role or one that required a mechanical aptitude preferred, • Ability to safely lift up to 100 pounds, • Ability to work at heights and use a ladder, • Must possess valid driver's license and good driving record What We Offer • Comprehensive medical, dental, and vision coverage — available your first full month, • Generous paid time off plus paid holidays and floating holidays, • Company-paid life insurance, short-term disability, and long-term disability, • 401(k) with employer match, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Voluntary benefits including supplemental life and critical illness coverage, • Employee discounts for you and your immediate family, • Competitive compensation with annual performance reviews Successful completion of employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) DH Pace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age disability, protected veteran status, genetic information, or any other status protected by applicable federal, sate, or local law.

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 5,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. About KBS At Kelso, we set our technicians up to thrive - with the tools, training, and team support to do the job right. We're a team built on integrity, customer commitment, and a culture where skilled people can grow real careers. About This Role We're hiring HVAC Preventative Maintenance Technicians for our Houston, TX operations. This is a full-time field role focused on maintaining commercial and industrial HVAC systems across a variety of building types. What You'll Do • Complete scheduled maintenance and inspections to keep systems running efficiently and extend equipment life., • Identify and resolve electrical and mechanical issues across a range of HVAC platforms., • Read and work from wiring diagrams, schematics, and manufacturer documentation., • Keep clients and team members informed on service findings and recommended next steps., • Maintain thorough service records covering work completed, parts used, and system conditions., • Perform all work in compliance with safety standards, applicable codes, and company policy. What You'll Bring • High school diploma or equivalent; HVAC technical training or certification preferred., • 1+ years of experience in an HVAC Maintenance or Service role., • Solid understanding of HVAC systems, electrical circuits, and mechanical components., • EPA 608 Universal Certification preferred., • Ability to read blueprints and technical documentation., • Strong diagnostic and problem-solving ability., • Effective communicator with solid customer service instincts., • Valid driver's license and ability to travel to job sites. Preferred Qualifications • NATE certification or equivalent., • Experience with digital service tools or mobile work order platforms. What You'll Get • Up to $35/hour based on experience and qualifications., • Medical, dental, and vision insurance., • 401(k) with company match., • PTO and paid holidays., • Training and certification opportunities. Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking a Commercial HVAC Installation Technician to support commercial HVAC construction projects in and around the Houston, TX area. Role Summary: The Commercial HVAC Installation Technician is responsible for the installation and replacement of commercial heating, ventilation, and air conditioning systems in retail, grocery, industrial, and institutional facilities. This role supports new construction, remodels, and large-scale equipment upgrades, ensuring installations are completed safely, efficiently, and in compliance with mechanical codes, project specifications, and manufacturer requirements. Roles and Responsibilities: • Install commercial HVAC equipment including rooftop units (RTUs), split systems, packaged units, exhaust fans, and make-up air units, • Assist with rigging, setting, leveling, and securing HVAC equipment using proper lifting methods and tools, • Install sheet metal ductwork, supports, hangers, insulation, and related mechanical components, • Install refrigerant piping, condensate piping, and associated mechanical connections as required, • Read and interpret mechanical drawings, HVAC blueprints, and installation plans, • Perform system change-outs, retrofits, and mechanical upgrades in active commercial facilities, • Coordinate daily work activities with foremen, superintendents, and other trades on site, • Ensure installations meet manufacturer specifications, mechanical codes, and company quality standards, • Identify material needs and communicate shortages, conflicts, or delays to project leadership, • Maintain productivity while meeting quality and schedule expectations, • Maintain clean, organized, and safe job sites, • Properly use, care for, and maintain tools, equipment, and company vehicles, • Participate in jobsite safety meetings and follow all safety policies and procedures, • Perform all work in a safe and responsible manner to protect employees, subcontractors, and the public Skills and Qualifications: • Working knowledge of commercial HVAC systems and installation practices, • Experience installing large tonnage HVAC equipment and duct systems, • Ability to read and follow mechanical drawings and HVAC blueprints, • Familiarity with sheet metal, piping, and mechanical installation methods, • Strong mechanical aptitude and attention to detail, • Ability to work independently and as part of a team in active construction environments, • Strong communication and time-management skills, • Problem-solving mindset in fast-paced commercial job sites Preferred Qualifications: • High school diploma or GED, • 2+ years of commercial HVAC installation experience, • EPA 608 Certification, • HVAC technical school or trade school coursework, • Experience working on retail, grocery, industrial, or institutional HVAC projects, • Valid driver’s license Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Controls Service Technician Reports to: Service Manager FLSA Status: Non-Exempt, Hourly The Opportunity We are seeking an experienced Controls Service Technician to work as part of a team responsible for start-up, troubleshooting, commissioning, servicing, and training of DDC Building Automation Systems. This position requires the ability to communicate clearly with customers, mechanical contractors, mechanical engineers, and co-workers. Responsibilities • Build and maintain customer relationships, primarily focused on occupied building contracts, • Analyze problems and resolve issues to ensure proper system functionality, • Explore and report opportunities for advanced solutions for building operations and energy savings, • Creation and modifications of animated graphics and minor software changes, • Performs service repairs, adjustments, and calibration on Building Automation Systems, • Provide technical support and training to customers as applicable, • Checkout, start-up, and commissioning on controls projects, • Mentoring and assisting peers as applicable The Required Profile • High School Diploma, Military Service and/or Trade School education, • Minimum of five (5) years of experience with HVAC Building Automation Systems, specifically with Niagara, • Niagara AX and N4, Honeywell Webs is a plus, familiar with other control systems, • Deep understanding of BACnet protocol, with some Lonworks and Modbus experience, • Must have good computer skills and be familiar with IP networks, • Communication skills required (both verbal and written), • Flexible to work overtime, weekends and/or an on-call schedule as needed, • Proficient in reading plans, submittal drawings and wiring diagrams, • Must have experience using various hand and power tools, • Ability to travel out-of-town occasionally may be required, • Valid driver's license with clean driving history Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job DescriptionBenefits: • Paid time off, • 401(k), • Company car, • Competitive salary, • Health insurance About the Role: Join Green Team AC as an HVACR Technician and be a part of our mission to provide top-notch heating, ventilation, air conditioning, and refrigeration services in Houston, TX. This exciting role offers the opportunity to work with a dedicated team and make a real difference in our customers' comfort and satisfaction. Responsibilities: • Install, maintain, and repair HVACR systems for residential and commercial clients., • HVAC, Refrigeration, Kitchen EXPERIENCE NEEDED, • Diagnose and troubleshoot system malfunctions and implement effective solutions., • Perform routine maintenance checks and ensure compliance with safety standards., • Provide exceptional customer service and educate clients on system operations., • Document service calls and maintain accurate records of work performed., • Collaborate with team members to ensure timely project completion., • Stay updated on industry trends and advancements in HVACR technology., • Adhere to all company policies and procedures for quality and safety.Requirements:, • High school diploma or equivalent; HVACR certification preferred., • Minimum4 years of experience in HVACR installation and repair., • Valid driver's license with a clean driving record., • Strong troubleshooting skills and attention to detail., • Excellent communication skills and a customer-focused attitude., • Ability to work independently and as part of a team., • Knowledge of local building codes and safety regulations., • EPA certification for refrigerants is a plus.About Us: Green Team AC has been serving the Houston community for over 18 years, delivering reliable HVACR solutions with a focus on quality and customer satisfaction. Our clients love us for our commitment to excellence, and our employees appreciate our supportive work environment and opportunities for growth.

Job DescriptionLevel 2 Security Officer Description Danner's Inc., a respected leader in Maritime Transportation and Security, is seeking dedicated Flex Non-Commissioned Security Officers to join our team in Pasadena, TX. We are in search of experienced Security Officers who hold a valid TWIC Card, are customer service oriented, courteous, work well under pressure and can complete tasks in a detailed and safe manner. Benefits: • Medical, Dental, Vision, Supplemental Life, AD&D and cancer policies after 60 days (fulltime eligible), • Paid Training, • Bi-Weekly Pay/Direct Deposit, • Chaplin Service available, • Danner's Cares, • Events and Prizes, Promotes from within., • Flexible shifts approximately Monday- Friday with opportunities 7 days a week, • Weekend and holiday availability is mandatory Schedule: • Position Type: Full and Part Time positions available, • Hours: Availability required for various shifts, including days, nights, and weekends Requirements Qualified Security Officers shall meet the following general & physical requirements: General: • NON-Commission Security Guard License (Level 2), • Valid Transportation Worker Identification Credential (TWIC) card is preferred. Opportunities for both TWIC and Non-TWIC holders., • Valid Driver's License, • Must be at least 18 years of age., • Must have a high school diploma or GED., • Ability to communicate effectively both orally and in writing., • Authorized to work in the United States., • Clean and Professional Appearance., • Must have active phone, • Must have reliable transportation Physical: • Full vision, • Walking up stairways, • Walking of distance, • Standing for long periods of time, • Sitting for long periods of time, • Lifting, pushing and pulling 25+ lbs., • Other physical demands may be required as needed. If you are enthusiastic about providing exceptional customer service and meet the qualifications above, please submit your resume and/or application. We look forward to hearing from you! We are an equal opportunity employer and value diversity. All qualified applicants will be considered for employment regardless of race, religion, national origin, color, sex, sexual orientation, gender identity, veteran status, or disability. Compensation details: 15-16 Hourly Wage PIbbc5cba9f0ef-25405-41093773

Job Description Job Title: Insurance Sales Agent Location: Southwest Houston (59 / Gessner) Job Type: Full-time About Us: IMD Insurance & Financial Services is a leading insurance brokerage firm dedicated to providing clients with customized insurance solutions tailored to their unique needs. We specialize in commercial, property & casualty, and life, ensuring our clients receive the best coverage and value. Purpose: To be of Service to Faith, Family, and Business with integrity because, without it, nothing works. Established in November 1999 Job Summary: We seek a highly motivated and results-driven Insurance Sales Agent to join our dynamic team. The ideal candidate will have a passion for sales, excellent communication skills, and a deep understanding of insurance products. As an Insurance Sales Agent, you will identify client needs, recommend suitable insurance policies, and build long-term relationships to drive business growth. Key Responsibilities: Generate new business through networking, referrals, cold calling, and lead generation. Assess clients’ insurance needs and recommend appropriate coverage options. To ensure informed decision-making, explain policy features, benefits, and exclusions to clients. Customize insurance plans to meet client requirements and budgets. Negotiate with insurance providers to secure competitive rates and terms. Maintain strong relationships with existing clients and provide exceptional customer service. Stay current with industry trends, insurance regulations, and product offerings. Meet or exceed sales targets and performance goals. Process applications, renewals, and policy modifications efficiently. Collaborate with team members and management to optimize sales strategies. Qualifications & Requirements: Bilingual Spanish & English Speaker - Required for this role High school diploma or equivalent (Bachelor’s degree in business, finance, or related field preferred). Active insurance license (or willingness to obtain). Proven experience in insurance sales, financial services, or a related field. Strong knowledge of various insurance products and industry regulations. Excellent negotiation, communication, and interpersonal skills. Self-motivated with the ability to work independently and as part of a team. Proficiency in CRM software and Microsoft Office Suite. Ability to handle multiple clients and prioritize tasks effectively. Strong analytical and problem-solving skills. Benefits: Competitive base salary plus commission + Bonus and performance-based incentives. Health, dental, and vision insurance options. Retirement plan with company matching. Ongoing training and professional development opportunities. Flexible work environment and growth potential within the company. How to Apply: If you are a driven professional looking to grow your career in the insurance industry, we’d love to hear from you! Please submit your resume and a cover letter outlining your qualifications and interest in the role to jason@imdins.com & clientservice@imdins.com IMD Insurance & Financial Services is an equal-opportunity employer. We celebrate wins and are committed to creating an inclusive environment for all team members. \nCompany Description We protect our client's Shelter, Transportation, Business, Life, and Identity. We do this by providing insurance products that provide monetary needs when bad circumstances arise. That way our clients focus on what is most important to them. Their family, clients, or even their business. We protect our client's Shelter, Transportation, Business, Life, and Identity. We do this by providing insurance products that provide monetary needs when bad circumstances arise. That way our clients focus on what is most important to them. Their family, clients, or even their business.

Job Description The Licensed Insurance Sales Producer plays a crucial role in driving new business development by proactively prospecting clients and providing expert consultation on insurance policies. As part of a dedicated sales team reporting to the sales manager, this role requires strong communication and negotiation skills to ensure customer retention and regulatory compliance. Sales targets and performance reviews are conducted weekly, emphasizing a results-driven approach without travel requirements. Responsibilities • Prospect and generate leads to expand the client base, • Consult with customers to assess insurance needs and recommend appropriate policies, • Ensure compliance with all regulatory requirements in policy sales, • Manage and maintain client accounts for long-term retention, • Report sales activities and performance metrics regularly, • Collaborate with the sales team under the guidance of the sales manager, • Focus on new business development to meet weekly sales targets Preferred Qualifications • 3+ years of experience in insurance sales, • High school diploma or equivalent, • Valid state insurance license, • Strong skills in insurance sales and customer relationship management, • Effective communication and negotiation abilities, • Knowledge of regulatory compliance and insurance products, • Excellent time management skills\nCompany Description Growing independent insurance agency Educational Incentives to grow your insurance knowledge base 10 Paid Holidays + Your Birthday Monthly Office Bonus available Quarterly Agent bonus available Growing independent insurance agency \r\nEducational Incentives to grow your insurance knowledge base\r\n10 Paid Holidays + Your Birthday\r\nMonthly Office Bonus available\r\nQuarterly Agent bonus available

Job Description *Salary grade indicates what an employee can make throughout their time in this role. Please Note: This posting is not an active listing of open positions. It is intended to collect applications from individuals interested in future employment opportunities. If this position becomes available in the location you selected and your qualifications align with our needs, a member of our team may contact you to discuss the opportunity and next steps in the hiring process. Department/Location: Service/ NSO Offices “Nationwide” Job Title: National Service Officer Apprentice Reports To: NSO Supervisor Salary Grade: Grade 10 ($20.18 - $31.39/hour) Type of position: ý Full-time o Part-time Hours: 40 hr/week o Exempt ý Nonexempt Job Summary: The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. This position encompasses the initial training period to achieve the designation of National Service Officer (NSO). The NSO Apprentice will study and train (via DAV’s on-the-job training program) to act as a representative for individual veterans (and their families) pursuing disability claims and other benefits from the United States Department of Veterans Affairs and, on occasion, other government entities. Essential Functions: • Acquire and maintain knowledge of all laws and regulations pertaining to veterans benefits through regular review of the Code of Federal Regulations and other publications and, where appropriate, decisions of the United States Court of Appeals for Veterans Claims., • Learn how to conduct detailed interviews of veterans to elicit information so that all potential benefits can be identified., • Review service records and other pertinent data, including medical records, to identify and/or assess validity of claims and potential claims., • Learn to determine whether additional evidence may be needed to support a particular claim; provide advice to veteran concerning same., • Learn to determine the risks and benefits of filing a particular claim., • Learn to assess whether the evidentiary support available for a given claim meets the requirements of 38 CFR § 14.633, which incorporates the rule on “frivolous claims” as adopted by the American Bar Association in Model Rule 3.1., • Practice preparing all submissions required to initiate and advance the claim, including, without limitation, briefs and similar documents analyzing the application of appropriate regulations to the facts of a given case., • Practice monitoring the progress of a claim from submission to resolution, dealing with VA adjudicators as required to advance the claim and keeping the claimant advised of significant developments., • Learn to advise the claimant, where appropriate, of administrative and judicial appeal options for claims denied in whole or part and, when requested, provide the claimant with specific advice concerning likely bases of appeal (if any)., • Practice representing claimants before military and VA hearing panels and boards, presenting evidence and legal argument and, as necessary, examining and cross-examining witnesses., • Learn to develop specific goals and plans to prioritize, organize, and accomplish clientele workload., • Communicate professionally and diplomatically with people inside/outside the organization., • Learn to recruit new DAV members to further support and enhance DAV’s mission of service., • Perform other administrative and outreach activities as directed by the office Supervisor. Essential Skills and Experience: • High school diploma (or equivalent)., • Must be found eligible and entitled to receive services through VA’s Vocational Rehabilitation and Employment Service under the established National Memorandum of Agreement containing DAV’s On-The-Job Training Program for National Service Officers except in situations where hiring a non-eligible candidate serves an important DAV business purpose., • Must be a member in good standing of the DAV., • Excellent communication skills., • General knowledge of legal and/or medical terminology preferred., • General understanding of business/administrative procedures and systems such as managing clientele files and records, cash ledgers, and quality customer service is helpful., • A valid motor vehicle driver’s license (other than motorcycle) is preferred., • Functional user of standard business computer, Microsoft Office software suite, and various computerized record systems/databases to retrieve automated veterans’ records. Degree of Supervision: • Works under the direct and ongoing supervision of Supervisory National Service Officer and/or other personnel assigned to conduct training; Apprentice exercises no supervisory responsibilities. Physical Demands and Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical Demands: Job requires sitting up to eight hours a day and standing up to two to four hours a day. Body movement primarily in hand and arm functions associated with normal office activities. Hand and eye coordination, and hand dexterity is required for handwriting and keyboarding over prolonged periods of time. Requires occasional lifting and/or carrying of no more than 25 pounds, and bending, squatting, pushing and pulling., • Work Environment: The noise level in the work environment is usually minimal., • Position may require minimal travel for training (advance authorization from National Service Director required)., • NSOs must be willing to relocate (nationwide) based on the needs of the DAV and provide written affirmation likewise.

Job DescriptionBenefits: • Company car, • Competitive salary, • Free food & snacks, • Free uniforms, • Health insurance, • Paid time off, • Profit sharing, • Vision insurance, • Bonus based on performance, • Dental insurance ASP of Central Houston has an immediate opening for a Pool Maintenance Technician to join our team of swimming pool professionals. The ideal candidate is a reliable, dedicated, team player, and a problem solver. They provide excellent customer service, love to work outdoors, and are able to work both independently, with minimal guidance throughout the day, and as part of a team. At all times, they handle matters with integrity and embrace the spirit of "5-Star Resort-Quality Service" for every customer. A Pool Maintenance Technician at ASP of Central Houston will: • Enjoy working outdoors at all times of the year, particularly in Houston’s varying conditions., • Manage a swimming pool route that includes the cleaning of residential and commercial swimming pools each week., • Maintain regular stock of company provided tools and chemicals on the company issued truck and properly adjust the water chemistry for each pool., • Be able to utilize a smart phone for our pool management mobile platform., • Be able to identify, communicate issues and solutions to customers, office/support team members, and/or leadership., • Hold a valid driver’s license with a clean driving record., • Be able to lift up to 100 lbs., • Agree to a background check and drug screen., • Have earned at least a high school diploma or equivalent – Certified Pool Operator is valued but not requiredThe Pool Maintenance Technician position averages 30-40 hours/week depending on seasonal and customer needs. We offer competitive compensation based on candidate experience and continued success. In addition to regular compensation, the following additional benefits are offered: • Opportunity for Bonus and/or Incentive Pay when individual (or team) goals are met, • Cell Phone Reimbursement of $25 paid via payroll every other week, • 7 Company-Paid Holidays, • Paid-Time-Off for scheduled vacation/absences, which begins accruing from date of hire, • Company Issued Truck (for commute & work only)Ater Training (between 60-90 days), our team members become eligible to participate in the following:, • Comprehensive Medical Coverage (ASP currently pays a dollar amount equivalent to 75% of the medical premium for our employees)., • Vision & Dental Coverage, • $15K Term Life Insurance (ASP currently pays 100% of the total premium for employees) -- About Us -- America’s Swimming Pool Company is America’s premier swimming pool service company with over 15 years in operation and an outstanding reputation. The Central Houston office is a growing location within the ASP family. We pride ourselves on providing "5-star resort-quality pool service". To do this, we maintain a team of dedicated and enthusiastic technicians who enjoy delivering resort-quality service and treating our customers with the utmost respect. Our approach has earned us loyal clients who expect and desire dependable, quality swimming pool solutions. We guarantee satisfaction with our services and do not require long-term contracts. We are certified and insured, and our team members are among the best in the swimming pool service industry.

Job DescriptionWe are seeking dependable and detail-oriented Production Line Operators to join our high-performance manufacturing team. As a core contributor to our production process, you will be responsible for operating, monitoring, and supporting key equipment across various workstations assuring high-quality pipe and tubing products that are delivered on time and to spec. You’ll work as part of a team that values safety, precision, and teamwork. With clear advancement pathways from Beginner to Expert level, we offer opportunities for training, cross-station development, and long-term career growth. Training on Dayshift 5:45am-6apm 2nd Shift Hours 5:54pm-6am Key Responsibilities · Operate production equipment and material handling systems according to SOPs. Use welding equipment to fuse materials together via STIK and MIG.· Read blueprints and technical drawings to understand project specifications. Monitor and maintain cycle times, flow rate, and material quality from one workstation to the next.· Identify defects related to welds, hole positioning, Swage fitment, or pipe straightness—and escalate or correct as needed.· Coordinate with upstream and downstream stations to manage flow, coil transitions, and bundle staging.· Perform basic mechanical troubleshooting and changeovers for production line equipment (based on level).· Ensure proper completion of production tracking, heat number labeling, bundle counts, and board updates.· Maintain a safe, clean, and organized work area according to 5S principles and OSHA standards.· Support equipment cleaning and preventative maintenance tasks to reduce downtime and improve longevity.· Participate in cross-training to become proficient in multiple stations and qualify as a floater or line lead.· Communicate effectively with supervisors, teammates, and other departments to keep production aligned.· Follow safety procedures rigorously and wear always assigned PPE.· Assist in loading, staging, and transporting materials when necessary (including forklift or crane operation if certified).· Demonstrate reliability through attendance, on-time performance, and accountability for daily duties. Qualifications· High school diploma or equivalent required. 1-3 years welding experience is required· Previous experience in manufacturing, fabrication, or industrial production preferred.· Ability to follow standard operating procedures, safety instructions, and quality control guidelines.· Physically capable of standing for long shifts, lifting materials, and working in a fast-paced environment.· Strong attention to detail, with the ability to recognize and respond to production defects.· Willingness to work overtime, weekends, or flexible hours as needed.· Must pass a drug screening as a condition of employment. Preferred Skills (Not Required)· Forklift or overhead crane experience· Basic mechanical or electrical troubleshooting knowledge· Experience using calipers, measuring tapes, and other quality control tools· Familiarity with lean manufacturing, 5S, or continuous improvement principles

Job DescriptionRAC Technician Proven Leadership, Hard Work, and Innovation Alive and Well in North America About Rittal LLC Rittal LLC is a global manufacturer of industrial and IT enclosures, racks, and accessories, including cooling solutions and power management systems for industrial, data center, outdoor, and hybrid applications. As the largest manufacturer of enclosures in the world, Rittal provides innovative, high-quality solutions for practically any industrial or IT infrastructure application—from single enclosures to comprehensive, mission-critical systems. Products are tested and certified to the appropriate standards that apply, including UL, CSA, ATEX, NEMA, and more. Rittal is a member of the Friedhelm Loh Group, a successful international organization with 18 production plants, 80 subsidiaries, and approximately 12,000 employees worldwide. Learn more at https://www.rittal.com/us-en_US/ As the Mod Center Technician, you will… Be responsible for assembling, modifying, and packaging products according to customer specifications and Rittal quality and safety standards. This role requires strong mechanical aptitude, attention to detail, and the ability to work efficiently in a fast-paced manufacturing environment. Why Work at Rittal & Eplan LLC Great Place To Work® Certified, Rittal & Eplan LLC offers a workplace culture built on employee experience, collaboration, and continuous innovation in a thriving environment. What We Offer: • Competitive compensation - $21.87, • Above-average benefits available on the 1st of the month after start date, • 401(k) with company match, • Health & Wellness benefits, including:, • Paid Volunteer Time, • Fitness Reimbursement, • Pet Insurance, • Tuition Reimbursement, • Employee Assistance Program (EAP), • Opportunities for growth and continuous improvementKey Responsibilities, • Assemble components and products by following work instructions, blueprints, and specifications, • Perform deburring and painting operations as required, • Utilize hand tools, power tools, and other equipment safely and efficiently, • Conduct visual inspections to ensure parts and assemblies meet quality standards, • Modify Rittal products to meet specific customer requirements, • Package finished products for shipment or further processing, • Maintain a clean, organized work area in accordance with 6‑S and safety standards, • Communicate effectively with team members and supervisors to support workflow, • Participate in team meetings and continuous improvement initiatives, • Follow all safety procedures and wear required personal protective equipment (PPE), • Perform other duties as assignedQualifications Education • High school diploma or GED preferredExperience, • Previous manufacturing or assembly experience is a plusSkills & Knowledge, • Strong mechanical aptitude, • Familiarity with hand tools, power tools, and measuring/inspection equipment, • Ability to read and interpret blueprints and work instructions, • Attention to detail and commitment to qualityPhysical Requirements, • Ability to stand, walk, bend, twist, and reach frequently throughout the shift, • Ability to lift 25–50 lbs to waist level and up to 25 lbs above shoulder level, • Ability to work efficiently in a fast-paced environment with changing prioritiesSafety Requirements, • Safety-toed footwear, • Safety glasses with side shields, • Additional PPE as requiredWork Environment, • Warehouse and manufacturing settings, • Exposure to varying temperatures, dust, and noise typical of an industrial environment#MFG If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company’s Human Resources Department at (937) 399-0500. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets. Powered by JazzHR IZ30tudSad

Job Description Assembler | $16.50–$17.50/hr | Monday–Friday, 8:00 AM–5:00 PM | On-site | Temp to Hire What Matters Most • Competitive pay of $16.50–$17.50 per hour, based on experience, • Day shift: Monday through Friday, 8:00 AM–5:00 PM, • Location: On-site, • Direct hire opportunity with long-term stability, • Weekly pay with direct deposit or pay card, • Eligibility for medical, dental, vision, 401(k), and referral bonus program through The Reserves Network Job Description The Assembler is responsible for assembling products using hand tools, machines, and testing equipment while meeting quality and production standards. This role involves following detailed work instructions, performing inspections, and packaging finished products for shipment. Assemblers will work independently and as part of a team in a fast-paced manufacturing environment while adhering to safety and quality requirements. Responsibilities, • Assemble parts according to detailed instructions, drawings, and specifications, • Operate and set up machines or equipment as required, • Perform quality checks and package finished products for shipment, • Follow OSHA, quality, and safety policies at all times, • Participate in continuous improvement, training, and near-miss programs Qualifications and Requirements, • High School diploma or equivalent, • Minimum 2 years of manufacturing experience, including electronic soldering, • Ability to read and interpret technical drawings and assembly instructions, • Strong organizational, problem-solving, and communication skills, • Ability to work independently and manage time effectively, • Overtime availability as required Benefits and Perks, • Pay rate: $16.50–$17.50 per hour, • Medical, dental, and vision benefits, • Paid holidays, • Ongoing training and career growth opportunities Your New Organization You will work in a structured manufacturing environment that prioritizes safety, quality, and teamwork. The organization values continuous improvement, employee development, and maintaining a positive workplace culture. Your Career Partner The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. Pay Transparency Statement: The base pay range for this position is $16.50–$17.50 per hour, excluding benefits, bonuses, or other compensation. Final compensation is based on skills, experience, and internal equity. Hiring at the top of the range is uncommon to allow room for future growth.

Job Description Job Title: Electromechanical Assembler Job Description: Trystar is a leader in power distribution equipment and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Based in our state-of-the-art headquarters in Faribault, MN, safety, and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar’s team members are our most important asset, we are in search of Assemblers for various Assembly lines. This position plays a critical role in achieving our strategic objectives. As part of load banks assembly team, the Assembler is responsible for producing world class quality products per customer specifications. We are looking for people who believe in our guiding principles and values of: • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way. Job Responsibilities: • Ability to build assemblies to print, including laying out and physically mounting devices to assemblies, wiring to print and OHM testing panels to ensure that it is built according to print. Must be able to interpret electrical schematics with the assistance of electricians., • Read, understand, and utilize engineering and manufacturing documents, including bill of material, assembly drawings, assembly work instructions, wiring schematics and diagrams., • Ensure a high level of quality by completing required in-process quality checks and escalate non conformances to appropriate resources., • Follow work order directions and safely produce the quantity of parts required and withing the required specifications., • Maintain a safe, organized, and efficient work area., • Complete and maintain all required documentation necessary in the operation., • Perform other duties and projects as assigned. Job Requirements: BASIC QUALIFICATIONS • High School diploma or equivalent, • Ability to read instructions, safely operate equipment and visually inspect parts produced., • Frequent lifting, standing, and bending required, • Ability to lift and carry up to 25 pounds unassisted PREFERRED QUALIFICATIONS • Good verbal and writing skills, • Accuracy and timeliness in completion of work assignments is a must, • Good hand dexterity and grip strength., • Experience reading and interpreting electrical schematics and diagrams preferred., • One year of wiring experience preferred., • Proficient use of hand and power tools required., • Demonstrated ability to collaborate effectively in a cross-functional environment., • Analytical thinker with proven problem-solving ability., • Well organized, detail-oriented, with ability to multi-task., • Self-motivated, takes initiative, drives closure on open issues with minimal supervision., • High personal integrity and ethics with uncompromising standards. Benefits: • 401 (k) with company match, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Disability Insurance, • PTO, • Sick Time, • Employee Appreciation Time, • Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

Job DescriptionSky High Party Rentals, Houston's #1 Bounce House Delivery Company is Hiring for two positions! Driver Helpers/Cleaners/Installers $12 to $14/hr Driver /Installers $14 to $17/hr + TIPS, TIPS, TIPS $$$! Our wonderful customers tip for outstanding service. If this sounds like you, please apply. Must Pass Background Check, & Be Okay With Heavy Lifting. Sky High Party Rentals rents out inflatable entertainment offering everything from moonwalks and mechanical sharks to giant inflatable coliseums. The company seeks out unique party rentals that no other company offers in its area in hopes to inspire kids and parents to use their imaginations. Sky High believes that kids should be able to play pirates inside their very own pirate ship. The company 's niche products travel to festivals, church bazaars, and school events throughout Houston, TX. Main Delivery Work Days are FRIDAY, SATURDAY, or SUNDAY You can work 1 or multiple days! Cleaning/Inspection of Inflatables is done Monday through Thursday.*Flexible schedules available! What’s great about weekend work days is you can make up to 30hrs in just 2 days. Efficiency and dedication are necessary tools to succeed with our exceptional driving team Responsibilities: • Cleaning and Installing Bounce houses, • Inspecting Bounce Houses for Damage, • Patching/Spot Cleaning Inflatables, • Washing with Soap and Water Inflatables, • Cleaning Concession Equipment, • Testing Games & Obstacle Courses, • Delivering and installing bounce houses throughout Houston, TX and 30-mile radius to backyards, schools, and businesses., • Loading and unloading equipment on to trailers., • Cleaning and installing bounce houses, tables, and chairs on location., • Communicating with route managers status of deliveries and pickups., • Perform daily pre-trip and safety inspections on equipment prior to commencing route., • Partner with routers and driver to acquire delivery schedule and communicate delays, arrivals, and/or equipment problems as encountered., • Assemble customer orders and place on-hand truck to complete delivery cycle., • Place product in storage and or account specific designated areas., • Comply with company safety standards, Department of Transportation regulations, Alcoholic Beverage Control regulations, and warehouse delivery policies/procedures., • Keep interior of the truck organized, clean and smoke free., • Work flexible hours which may include early mornings (6:00 a.m.) start times, evenings, and/or weekends., • Additional hours and overtime available., • Ensure correct delivery of product Minimum Qualifications: • Aged 16 and Older, • State Issued or School ID and Social Security, • Social Security Card, • Ability to count and perform basic math, with or without a calculator., • Language skills that allow employee to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Provide high level of customer service to ensure accounts are satisfied with product and timeliness of deliveries., • Able to regularly and consistently lift and carry 45-60+ pound cases of product., • Competent working independently on a daily basis with minimal supervision., • No felonies as required by state school districts for our industry., • Clean Criminal Record, 0 Infractions Preferred Qualifications: • Customer Service Experience, • Any Outside Work Experience, • School Sports Athletes/Workout Enthusiast -Students Language: English (Required) Bilingual/Spanish a plus! Job Types: Full-time, Part-time, Flexible Schedules

Job Description About Metrix Metrix is a global leader in industrial condition monitoring and machinery protection solutions. Headquartered in Houston, Texas, we serve customers in more than 40 countries through direct sales and service professionals, along with a strategic network of instrumentation partners. For over 50 years, we have helped leading manufacturers and operators protect critical rotating and reciprocating machinery used in power generation, oil & gas, manufacturing, and other industrial applications. Our innovative products are trusted worldwide for their reliability, simplicity, and performance. Position Summary Perform any combination of the following duties to assemble parts of various materials. Assemble parts in specified relationship to each other, using hand, hand tools, or bench test equipment to meet required quantity and quality parameters. Package products as required for shipping. RESPONSIBILITIES: • Follows detailed assembly instructions and processes., • Performs machine setup where applicable; runs machines and processes., • Follows Quality Policy and Procedures, OSHA guidelines and regulations governing workplace safety., • Trains other employees on job functions and safety requirements, as needed., • Performs other duties as requested by team lead and supervisor., • Participation in Continuous Improvement process, • Participation in Near Miss program, • Must remain up to date on all training (i.e. safety, 5’S ) Additional Responsibilities: • Follow all company Quality, Health, Safety and Environmental policies and procedures., • Respond to change productively and handle other duties as required., • Work independently and employ effective time management skills., • Over-time as required. QUALIFICATIONS: Knowledge & Skills: • Assembly, Testing., • Ability to work independently and as part of a team., • Good communication (written and oral) and interpersonal skills., • Must be a self-starter., • Strong organizational skills., • Demonstrated problem-solving skills., • Working knowledge of manufacturing processes and equipment., • Ability to read and interpret technical drawings and prints., • Ability to read, understand, and follow relevant assembly, testing, and QMS procedures. Education Minimum Requirements/Equivalent: • High School degree or equivalent. Experience: • Minimum 2 years experience with manufacturing processes and electronic soldering experience WORKING CONDITIONS: Individual will generally be working in the production area. Noise levels encountered will vary from heavy machining to minimum noise level. Likewise, individual may be exposed to fumes from chemicals, paints, and assembly glues in the manufacturing areas. Please refer to the MSDS Notebook in this department for specific details regarding chemical exposure. PHYSICAL REQUIREMENTS: This position requires frequent standing, walking, sitting, balancing, stooping, kneeling, crouching, and crawling activities. In addition, there is frequent reaching and climbing of stairs. There is pushing and lifting / carrying of boxes weighing 35 lbs. Average vision and hearing is sufficient. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Privacy We are committed to the protection and promotion of your privacy. In connection with your application for employment with us at Metrix, please click on this link to view our Applicant Privacy Notice. (metrixvibration.com) Metrix is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Part-Time & Full-Time Professional Chauffeurs for Hire – Houston TX We are a fast-growing executive transportation company based in Houston, TX, seeking professional, reliable chauffeurs to join our team. We proudly serve high-level, high-profile clients across a variety of industries and are committed to delivering the highest levels of professionalism, service, and safety. Ideal Candidates Are: • Extremely reliable, dependable, and punctual, • Friendly and professional under all circumstances, • Able to thrive in a fast-paced, high-energy environment, • Self-motivated, energetic, and positive-minded, • Customer-focused, with a commitment to creating exceptional experiences Job Responsibilities: • Safely transport clients to and from airports, residences, business meetings, hotels, events, and more, • Provide concierge-level service, including assistance with luggage, • Maintain professional appearance, communication, and behavior at all times, • Follow all driver-related procedures and perform additional duties as assigned, • Ensure an exceptional customer service experience on every ride Qualifications: • Minimum age: 25 years, • High school diploma required; college experience preferred, • Experience in driving, hospitality, concierge, airline, or customer service is ideal, • Background in hotels, rental car companies, or luxury service industries is a plus, • Strong communication skills and a professional demeanor, • Ability to stay calm and proactive in dynamic situations, • Valid Texas driver’s license with a clean driving record, • Must pass a criminal background check and drug screening, • Able to lift up to 50 lbs. and maintain full range of motion, • Fluent in spoken and written English, • Attention to detail and the ability to follow both oral and written instructions are essential How to Apply: If you meet the above qualifications and are interested in joining our team of professionals, please reply to this posting with: • Your updated resume, • A brief written background about yourself, • A short summary of your current or most recent employment We look forward to hearing from you and potentially welcoming you to our team! \nCompany Description We are a premium executive transportation service dedicated to providing luxury transportation with professional chauffeurs, impeccable vehicles, and exceptional customer care. Since 1970, Perfect for business, events, and special occasions. We are a premium executive transportation service dedicated to providing luxury transportation with professional chauffeurs, impeccable vehicles, and exceptional customer care. Since 1970, Perfect for business, events, and special occasions.

Job Description About Zedcor Inc. Zedcor Inc. (TSX-V:ZDC) is disrupting the traditional physical security industry through its proprietary MobileyeZ™ security towers by providing turnkey and customized mobile surveillance and live monitoring solutions to blue-chip customers across North America. The Company continues to expand its established platform of over 1,200 MobileyeZ™ towers in Canada and the United States, with emphasis on industry leading service levels, data-supported efficiency outcomes, and continued innovation. Zedcor services the Canadian market through equipment and service centers currently located in British Columbia, Alberta, Manitoba, and Ontario. The Company continues to advance its U.S. expansion which now has the capacity to service markets throughout the Midwest with locations throughout Texas Colorado, Arizona, Nevada and Florida. For more information, check out www.zedcor.com. Position Overview Zedcor is seeking an Assembly Technician who will be responsible for assembling, testing, and inspecting products to ensure they meet quality standards and specifications. The ideal candidate should have strong mechanical aptitude, excellent hand-eye coordination, and the ability to work in a fast-paced manufacturing environment. Key Responsibilities • Assemble components and products according to blueprints, work instructions, and specifications., • Use hand tools, power tools, and specialized equipment to complete assembly tasks., • Inspect finished products for quality assurance, ensuring they meet the required standards., • Identify and report defects, malfunctions, or discrepancies in materials or finished products., • Maintain a clean and organized work area, following safety guidelines and company policies., • Perform routine maintenance on assembly equipment as needed., • Work collaboratively with team members, engineers, and supervisors to improve assembly processes., • Keep accurate records of production work, including time, materials, and completed units., • Follow all company procedures, safety regulations, and industry standards., • Collaborate with teams to support product development and innovation., • Adhere to all state/federal and company policies regarding safety while carrying out your duties., • Attend all meetings and training as required., • Represent ZEDCOR in a professional and courteous manner at all times. Qualifications • Applies technical and professional knowledge required to perform job, • High school diploma or equivalent, • Previous experience in assembly, manufacturing, or a related field preferred., • Ability to read and interpret technical drawings, schematics, and instructions., • Strong attention to detail., • Basic knowledge of mechanical and electrical components., • Strong problem-solving skills and ability to work independently or as part of a team., • Willingness to learn and adapt to new assembly techniques and technologies., • Works well with others toward completion of common goal, • Recognizes potential problems, and offers proactive solutions, • Ability to lift and carry up to 50 lbs and stand for extended periods. Physical Demands • Manufacturing or production facility., • Exposure to machinery, tools, and potential hazards (protective gear may be required)., • May require standing, bending, and lifting for long periods, • Exposure to heat, humidity, and cold temperatures Compensation & Benefits • Pay range: Starting at $20.00 per hour (depending on experience), • Health, dental, vision, life, and disability insurance (after 90-day probation), • Competitive salary and comprehensive benefits package., • Opportunities for career growth and leadership development., • A supportive and innovative workplace culture., • The chance to be part of a company that values its employees and invests in their success. Why Join Zedcor? At Zedcor, you won’t just maintain systems, you’ll help build and shape the future of security technology. We provide the tools, mentorship, and the environment to help you thrive and grow in your technical career. If you’re looking to take your skills to the next level, Zedcor offers a dynamic and rewarding opportunity. Zedcor Inc. is an Equal Opportunity Employer and maintains the policy of recruiting and retaining the best-qualified personnel who demonstrate the ability to perform competently and work well with others. It is the policy of Zedcor to provide equal employment opportunity regardless of race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver’s license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. This policy of nondiscrimination is applied to all aspects of the employment relationship. The Company complies with the Americans with Disabilities Act (ADA) and applicable state and local laws in ensuring equal opportunity and employment for qualified persons with disabilities. We also consider qualified applicants with criminal histories, consistent with legal requirements. The following link provides more information regarding the Federal laws prohibiting discrimination in employment: EEO is the Law – Notice of Applicant Rights Under the Law.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - Ensure that appropriate number of cars is kept on location throughout shift, cars are being parked in an appropriate fashion and the lot is kept clean and presentable. • Direct incoming customers to available parking spaces., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies., • Patrol transient and reserved parking levels on foot or in customized motor carts, if applicable., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Courteously assist Customers by answering any questions they may have. If necessary, direct the Customer to the Facility Manager for further assistance., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage., • Assist Facility Manager with other duties as needed. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience Required: Less than High School education or one month related experience, training or an equivalent combination of education and experience. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $20.00 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact Recruit@spplus.com. We are here to assist you.

Job DescriptionDescription: Valet Full time and Part time *Immediate Hire Opportunity* This is a full-time or part-time position as a valet driver at Radkin. We seek a dedicated Valet Driver to join our team at one of our prestigious locations. This role is essential to maintaining the high standards of service our residents expect. We are a 24/7 company and may require your schedule to work holidays. Valet Driver adheres to the needs of residents and guests by providing convenient service so that they can relax with confidence that their needs are being well maintained. Requirements: Requirements · Must Have a Valid Driver’s License · Must Be 18 Years or older · Location: Museum District · High school diploma minimum · No experience needed · Job Type: Full Time or Part Time, Non-Exempt (with Radical benefits) · Work Hours: We are a 24/7 company and may require your schedule to work holidays. · Physical – sitting and standing · On-call availability · Starting hourly rate $16 Responsibilities: · Always maintaining a high level of professionalism and customer service · Collaborate with other departments to ensure seamless guest experiences · Responsible for parking and proper care of residents’ vehicles · Abiding by proper key storage policies and procedures

Job Description At Evolution, we’re always on the lookout for the right people. Those who are passionate about the service industry – going above and beyond to make guests happy. Those who aren’t afraid to disrupt the “status quo” as we create new ways to elevate experiences. Those who can help us drive business forward. Get ready for more than just another job. Because when you help us reach our goals, we’ll help you reach yours – through growth opportunities, career development, and perks and benefits to help you live your best life. Just imagine getting started as a Valet and working your way up to Guest Services Manager. It’s not only possible – it’s the path many of our managers have followed. Job Summary: As a Valet Attendant, you will be responsible for delivering first-class customer service to guests in a professional, courteous, and efficient manner. The Valet Attendant is responsible for assisting arriving and departing guests by opening and closing doors, parking and securing vehicles, unloading luggage, retrieving vehicles in a timely manner and extending the initial friendly welcome to the hotel guests. Are You The Right Fit For This Role? • You will be working outside in all kinds of weather, as we do not stop parking cars when it rains, snows, is too hot or too cold., • You must love physical activity, as you will be lifting up to 50lbs as we help take suitcases in and out of the vehicle. You will also need to run, stand for long periods of times, and go up and down stairs within parking garages., • You will need to be personable and comfortable talking with guests as you help them through the valet check in process. Providing excellent guest service is a must! The Road To Your Success: • We provide paid training, High End Forbes Standards training, and continuous on the job training to enhance your skills!, • Later, you can grow into a supervisor or an operations manager through our Crescendo Training Program, • Our company is growing rapidly and this will provide numerous opportunities for advancement locally and across the nation. The Ability To Work Any Schedule Or Shift: • We hire valets to start part time, but with the opportunity to grow rapidly into full time supervisor roles., • You will be assigned an initial schedule to meet our needs at the Hotel property. These schedules will be during our busiest times to ensure higher tips and less work hours., • You must be available to work flexible schedules, weekends, and holidays., • Punctuality and reliability are essential! The Rewards For Your Efforts: • Cash Tips (Take home Daily), • Short shifts that allow you maximum flexibility to make the most tips in the shortest time, • Corporate Recognition Program, • Best in class training to prepare you for your future, • Great work culture located at some of the finest hospitality companies in the world Education & Experience: • High school diploma or equivalent., • Experience as a Valet parking attendant, preferred., • Experience driving a manual transmission vehicle, preferred., • Proficiency in English; verbally and written., • Exceptional guest service skills., • Excellent communication and interpersonal skills., • Must have a Valid Driver's License and 3 years of driving experience, • Ability to complete and pass pre-employment background, drug, and MVR screen., • Ability to lift, push, pull objects up to 50 pounds with reasonable accommodation, and exhibit full range of motion including standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching., • Ability to stand for long periods of time and occasionally run., • Ability to run up and down multiple level of stairs., • Ability to work outdoors in all weather conditions. Evolution Parking & Guest Services is proud to be an Equal Opportunity Employer with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected categories.

Job Description At Evolution, we’re always on the lookout for the right people. Those who are passionate about the service industry – going above and beyond to make guests happy. Those who aren’t afraid to disrupt the “status quo” as we create new ways to elevate experiences. Those who can help us drive business forward. Get ready for more than just another job. Because when you help us reach our goals, we’ll help you reach yours – through growth opportunities, career development, and perks and benefits to help you live your best life. Just imagine getting started as a Valet and working your way up to Guest Service Manager. It’s not only possible – it’s the path many of our managers have followed. We offer flexible schedules: Part-Time morning, afternoon, evening, or even just weekend hours. Do you like having cash in your pocket every day AND have a paycheck every 2 weeks? Base salary paid bi-weekly PLUS CASH tips paid out daily. We offer all associates many different benefits and perks: • Holidays Paid at Overtime Rate, • Employee Assistance Program, • Bi-weekly base pay plus daily cash tips, • Free Forbes 5 Star training! Job Summary: As a Valet Attendant, you will be responsible for delivering first-class customer service to guests in a professional, courteous, and efficient manner. The Valet Attendant is responsible for assisting arriving and departing guests by opening and closing doors, parking and securing vehicles, unloading luggage, retrieving vehicles in a timely manner, and extending the initial friendly welcome to the hotel guests. Are You The Right Fit For This Role? You will be working outside in all kinds of weather, as we do not stop parking cars when it rains, snows, is too hot, or too cold. You must love physical activity, as you will be lifting up to 50 lbs as we help take suitcases in and out of vehicles. You will also need to run, stand for long periods, and go up and down stairs within parking garages. You will need to be personable and comfortable talking with guests as you help them through the valet check-in process. Providing excellent guest service is a must! The Road To Your Success: We provide paid training, High-End Forbes Standards training, and continuous on-the-job training to enhance your skills! Later, you can grow into a supervisor or an operations manager through our Crescendo Training Program. Our company is growing rapidly, and this will provide numerous opportunities for advancement locally and across the nation. The Ability To Work Any Schedule Or Shift: We hire valets to start part-time, but with the opportunity to grow rapidly into full-time supervisory roles. You will be assigned an initial schedule to meet our needs at the Hotel property. These schedules will be during our busiest times to ensure higher tips and fewer work hours. You must be available to work flexible schedules, weekends, and holidays. Punctuality and reliability are essential! The Rewards For Your Efforts: • Cash Tips (Take home Daily!), • Short shifts that allow you maximum flexibility to make the most tips in the shortest time, • Corporate Recognition Program, • Best-in-class training to prepare you for your future, • Great work culture located at some of the finest hospitality companies in the world Education & Experience: • High school diploma or equivalent., • Experience as a Valet parking attendant, preferred., • Experience driving a manual transmission vehicle, preferred., • Proficiency in English; verbally and written., • Exceptional guest service skills., • Excellent communication and interpersonal skills., • Must have a Valid Driver's License and 3 years of driving experience, • Ability to complete and pass pre-employment background, drug, and MVR screen., • Ability to lift, push, pull objects up to 50 pounds with reasonable accommodation, and exhibit full range of motion including standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching., • Ability to stand for long periods and occasionally run., • Ability to run up and down multiple levels of stairs., • Ability to work outdoors in all weather conditions. Evolution Parking & Guest Services is proud to be an Equal Opportunity Employer with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected categories.

Job Description Overview Please scroll for Spanish translation | Por favor, desplácese hacia abajo para ver la traducción al español Parking Attendants (Non-Driving) Pay Rate: $14.00 - $15.00 per hour plus cash tip$! Job Type: Full-time & Part-time Location: Houston, TX Shifts Available: Mornings and Evenings, Weekends & Holiday Applications will be accepted until job is closed. Propark Mobility is currently hiring Parking Attendants for full-time and part-time opportunities to start immediately. What we're looking for:* • Direct patrons where to park., • Issue tickets to customers, recording the required information on each ticket., • Process exception transactions (e.g., lost tickets, grace period tickets, etc.) according to company policy, including completing the applicable form., • Complete the daily shift paperwork by recording the number of transactions by parking rate, number of vehicles in and out of the facility, number of contract parkers, vehicles left in the facility, number of validated tickets and exception tickets., • Provide the company’s standards of service with each customer including maintaining the required uniform appearance, stating the company greeting, answering questions, resolving issues and thanking each customer upon exit., • May be asked by local management to complete small cleaning or maintenance tasks according to the company’s maintenance checklists., • Other special projects as assigned by location management. What's in it for you? • We promote from within - park your career here!, • Free Parking!, • Flexible scheduling; paid Holidays and Wellness., • Free and confidential employee assistance program (EAP) that provides support and resources to employees and their families 24/7. Including 3 free counseling sessions for all employees and each household family member., • (FT Employees) Paid vacation and an extra day-off on your birthday!!, • (FT Employees) Benefits Package - including medical, HSA, FSA, dental, vision, and 6 supplemental insurances, including commuter benefits, pet insurance and 401k!, • The Company offers seven (7) paid holidays even though the nature of our business requires that our locations stay open. The seven (7) holidays include: New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, Birthday (Floating Holiday) Any positions offered that are PT, PT Seasonal, FT Seasonal, or OC are not eligible for health insurance benefits.*, • Wellness is provided according to city or state mandates, • For more information: https://www.propark.com/careers/ Must haves: • You are at least 18 years old., • High School degree preferred but not required., • Ability to read, comprehend, and communicate effectively both verbally and through written correspondence., • Ability to work in a fast-paced environment., • Ability to maintain a professional and friendly demeanor when working with other employees and the parking customer., • Ability to provide customer resolution in a professional and friendly manner., • Available Mornings, Evenings, Overnight Good to haves: • Customer service: 1 year+ Physical Demands and Working Conditions The physical demands of this position and the work environment characteristics described below are representative of those that must be met by an employee to perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential job functions. Physical Demands: the employee will be required to stand, walk, sit, use hands-to-fingers, handle tools or controls, reach with hands or arms, talk and hear. Employee must occasionally lift and/or move objects up to 25lbs. Work Environment: the employee may be subjected to weather conditions prevalent at the time. The employee is regularly exposed to fumes and airborne particles. The noise level in this work environment can range from minimal to moderate. *This list is not all-inclusive. The full job description will be provided at your interview. **Free parking while working at your assigned Propark location(s). Propark is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. The company is pleased to provide such assistance, and no applicant will be penalized as a result of such a request. Qualified applicants with arrest and conviction records will be considered for employment in accordance with the San Francisco Fair Chance Ordinance. Please go to the Propark corporate careers portal to view our CPRA Applicant Notice and Privacy Policy for the state of CA. This policy will also be emailed to you upon receipt of your application. Please go to the Propark corporate careers portal to view our Notice of E-Verify Participation - Propark Mobility participates in E-Verify. Following acceptance of your offer, we may verify your employment eligibility through the federal E-Verify program. Notice of E-Verify Participation Personal de Estacionamiento (Sin Conducción) **Por favor, consulte arriba para ver el salario, turno, etc. Lo que buscamos:* Dirigir a los clientes hacia dónde estacionar. Emitir boletos a los clientes, registrando la información requerida en cada boleto. Procesar transacciones excepcionales (por ejemplo, boletos perdidos, boletos en período de gracia, etc.) de acuerdo con la política de la empresa, incluyendo completar el formulario correspondiente. Completar la documentación diaria del turno registrando el número de transacciones por tarifa de estacionamiento, número de vehículos que entran y salen de la instalación, número de abonados, vehículos que permanecen en la instalación, número de boletos validados y boletos excepcionales. Brindar los estándares de servicio de la empresa a cada cliente, incluyendo mantener la apariencia de uniforme requerida, dar el saludo de la empresa, responder preguntas, resolver problemas y agradecer a cada cliente al salir. Puede ser solicitado por la gerencia local para completar pequeñas tareas de limpieza o mantenimiento de acuerdo con las listas de verificación de mantenimiento de la empresa. Otros proyectos especiales según lo asigne la gerencia de la ubicación. Lo que ofrecemos: ¡Promovemos desde dentro: estaciona tu carrera aquí! ¡Estacionamiento gratuito! Horarios flexibles; días festivos y bienestar pagados. Programa de asistencia al empleado (EAP) gratuito y confidencial que brinda apoyo y recursos a empleados y sus familias 24/7. Incluye 3 sesiones de consejería gratuitas para todos los empleados y cada miembro de la familia del hogar. (Empleados de tiempo completo) Vacaciones pagadas y ¡un día libre adicional en tu cumpleaños! (Empleados de tiempo completo) Paquete de beneficios – que incluye seguro médico, HSA, FSA, dental, de visión y 6 seguros complementarios, incluyendo beneficios de transporte, seguro para mascotas y 401k. La empresa ofrece siete (7) días festivos pagados aunque la naturaleza de nuestro negocio requiere que nuestras ubicaciones permanezcan abiertas. Los siete (7) días festivos incluyen: Día de Año Nuevo, Día de los Caídos, Día de la Independencia, Día del Trabajo, Día de Acción de Gracias, Día de Navidad, Cumpleaños (día festivo flotante).* Cualquier puesto ofrecido que sea PT, PT temporal, FT temporal u OC no es elegible para beneficios de seguro médico. Bienestar proporcionado de acuerdo con los mandatos de la ciudad o el estado. Más información: https://www.propark.com/careers/ Requisitos indispensables: Tener al menos 18 años de edad. Se prefiere título de secundaria, pero no es obligatorio. Capacidad para leer, comprender y comunicarse eficazmente tanto verbalmente como por escrito. Capacidad para trabajar en un entorno de ritmo rápido. Capacidad para mantener una actitud profesional y amistosa al trabajar con otros empleados y con los clientes de estacionamiento. Capacidad para brindar resolución al cliente de manera profesional y cordial. Disponibilidad por la mañana, tarde y noche. Requisitos deseables: Servicio al cliente: 1 año o más. Exigencias físicas y condiciones de trabajo Las exigencias físicas de este puesto y las características del entorno laboral descritas a continuación representan las que debe cumplir un empleado para desempeñar las funciones esenciales de este cargo. Se pueden realizar adaptaciones razonables para permitir que personas con discapacidades realicen estas funciones esenciales. Exigencias físicas: el empleado deberá estar de pie, caminar, sentarse, usar las manos y dedos, manipular herramientas o controles, alcanzar con las manos o brazos, hablar y oír. Ocasionalmente deberá levantar y/o mover objetos de hasta 25 libras. Entorno laboral: el empleado puede estar expuesto a las condiciones climáticas prevalentes en ese momento. El empleado está regularmente expuesto a humos y partículas en el aire. El nivel de ruido en este entorno de trabajo puede variar de mínimo a moderado. *Esta lista no es exhaustiva. La descripción completa del puesto se proporcionará en su entrevista. **Estacionamiento gratuito mientras trabaje en la(s) ubicación(es) de Propark asignadas. Igualdad de oportunidades Propark es un Empleador que ofrece Igualdad de Oportunidades (EOE). Los solicitantes calificados son considerados para el empleo sin distinción de edad, raza, color, religión, sexo, origen nacional, orientación sexual, discapacidad o condición de veterano. Si necesita asistencia o una adaptación durante el proceso de solicitud debido a una discapacidad, está disponible a solicitud. La empresa se complace en brindar dicha asistencia, y ningún solicitante será penalizado como resultado de dicha solicitud. Los solicitantes calificados con antecedentes de arrestos y condenas serán considerados para el empleo de acuerdo con la Ordenanza de Oportunidad Justa de San Francisco. Por favor, visite el portal corporativo de carreras de Propark para ver nuestro Aviso para Solicitantes CPRA y la Política de Privacidad del estado de California. Esta política también se le enviará por correo electrónico al recibir su solicitud. Por favor, visite el

Job Description At Moody, we believe that people are the most important ingredient of any business. It’s the people who ultimately determine what can be achieved. That’s why creating a culture based on trust, respect, and hard work is our top priority. We encourage our people to always reach higher, learn more, and live up to their potential, delivering our customers the best real estate solutions possible. The Residence Inn Houston Medical Center/NRG Park, managed by Moody National Management LP is currently looking for House Attendants to join our team. All associates are offered competitive pay, flexible scheduling opportunities, paid holidays and 401(k) with Employer Match. Full-time associates also enjoy paid time off and comprehensive benefits (including medical, dental, and vision). The House Attendant contributes toward high levels of guest satisfaction by achieving or exceeding the Company’s and Hotel Brand’s standards regarding the cleanliness and safety of all public areas and hallways and by providing professional, courteous, and prompt responses to guest inquiries and concerns. Essential Functions: • Clean all public areas in accordance with established procedures, including lobbies, hallways, elevators, service areas, stairwells, public restrooms, etc.; dust and polish furniture, fixtures, and window frames; vacuum carpeting, upholstery and drapery; clean and shine all glass and metal surfaces; clean offices as assigned., • Patrol hallways and remove newspapers and service trays, remove trash and/or soiled linens. May strip guest rooms., • Empty ash urns and pick up trash outside., • Stock public restrooms with supplies and maintain assigned housekeeping cart with all necessary supplies., • Respond to guest inquiries in a courteous manner; professionally resolve issues, promptly report lost/missing guest possessions; assist guests with luggage., • Deliver, put away, or retrieve supply orders, cribs, roll-aways, and other room items., • Promptly report any unsafe, broken, or missing furnishings, equipment, or fixtures to the Executive Housekeeper or Shift Supervisor., • Assist Room Attendants as needed, especially with moving heaving items., • Other duties as assigned by management. Job Specifications • Sound working familiarity with safety and security procedures and guidelines and ability to safely operate commercial housekeeping equipment., • Ability to read and understand written instructions to carry through housekeeping tasks., • Good command of the English language; second language proficiency desirable, • Excellent time management skills and ability to multi-task and prioritize work, • Ability to maintain customer focus, • Excellent organizational and planning skills, • Excellent interpersonal skills., • Ability to work well in a team environment., • Ability to follow corporate and brand standards and procedures. Experience and Education: • High School education desirable but not required., • 1+ years of experience as a House Attendant or a comparable position is desirable., • Minimum training required per year as assigned by the company, • Any additional training required by manager Work Environment: • This job operates in a hotel environment. This role routinely uses standard housekeeping equipment., • Exposure and frequent use to commercial and household chemicals and cleaning solutions., • This position may be available on a full-time or part-time basis depending on business demands., • Work days and work hours may vary. Occasional overtime may be required., • This position works in doors and occasionally works outdoors.

Job Description Lead Housekeeper Piping Technology & Products Inc. Description About Piping Technology & Products (PT&P) Founded in 1978 and based in Houston, TX, PT&P is a leading manufacturer of engineered pipe supports and other piping system products used in power, refining, chemical, and related industries. We're known for fast turnaround, reliable quality, and a strong commitment to helping our customers keep critical infrastructure running. With a wide range of in-house capabilities, PT&P continues to grow while staying focused on innovation, service, and long-term partnerships. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Lead Housekeeper is a working lead responsible for guiding and supporting the housekeeping team while performing hands-on cleaning and facility upkeep duties. This role sets the pace on the floor, ensures daily cleaning tasks are completed to standard, and serves as the first point of contact for the team when the Housekeeping Supervisor is unavailable. The Lead Housekeeper helps maintain a clean, safe, and organized manufacturing facility across the shop floor, offices, breakrooms, restrooms, shipping areas, and common areas. Key Responsibilities Daily Operations and Hands-On Cleaning • Perform cleaning, sanitation, and housekeeping duties alongside the team, including floor care, waste removal, restroom cleaning, breakroom upkeep, and supply replenishment., • Set the standard for quality and pace of work through consistent personal performance., • Complete assigned cleaning routes and ensure all areas meet company cleanliness standards before the end of each shift., • Respond promptly to spills, hazards, or urgent cleaning needs on the shop floor or in common areas. Team Guidance and Coordination • Serve as the on-the-floor lead, directing daily task assignments and helping team members stay on track., • Step in as the primary point of contact for the housekeeping team when the Housekeeping Supervisor is unavailable., • Help train new team members on cleaning procedures, chemical handling, equipment use, and safety practices., • Communicate team progress, issues, and supply needs to the Housekeeping Supervisor. Facility Standards and Inspections • Conduct walkthroughs during and after shifts to verify cleaning quality and identify areas that need attention., • Report facility maintenance concerns, including lighting, plumbing, flooring, and fixture issues, to the Housekeeping Supervisor or Maintenance., • Help maintain accurate logs of completed tasks, inspections, and supply usage., • Identify opportunities to improve cleaning efficiency, consistency, and workflow. Safety and Compliance • Follow all OSHA requirements, company safety policies, hazard communication procedures, and chemical-handling practices., • Wear required PPE at all times and ensure team members do the same., • Coordinate with Safety and Maintenance on spills, hazards, and facility conditions as needed., • Handle cleaning chemicals and equipment according to product labels and Safety Data Sheets (SDS)., • Perform other related duties as assigned. Requirements • High school diploma or GED required., • At least 2 years of housekeeping or janitorial experience; experience in a manufacturing or industrial environment preferred., • Prior lead or senior-level experience preferred., • Knowledge of cleaning chemicals, equipment, sanitation practices, and workplace safety procedures., • Ability to read and follow product labels, Safety Data Sheets (SDS), written procedures, and schedules., • Ability to work effectively in a manufacturing environment, including exposure to heat and noise and compliance with required PPE., • Strong organizational, communication, and time-management skills., • Ability to prioritize tasks, maintain accurate records, and coordinate with team members and other departments., • Bilingual English/Spanish skills preferred., • Ability to stand, walk, bend, stoop, reach, and perform physical cleaning duties for extended periods; ability to lift and move housekeeping supplies and equipment as required. Key Competencies • Hands-on leadership and setting the standard, • Reliability and accountability, • Attention to cleanliness, detail, and quality, • Safety and compliance mindset, • Communication and teamwork, • Problem solving and responsiveness, • Organization and time management Why Join Us? We offer a dynamic work environment, competitive compensation, and opportunities for professional growth. As a key part of our team, you will have the chance to shape our processes and contribute directly to the success of our manufacturing operations. Work Location This is a full-time, in-person position located at: 3701 Holmes Rd #1545, Houston, TX 77051 \nCompany Description PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently

Job Description Clarewood House Retirement Community is hiring a full-time/part-time housekeeper to clean apartments, bathrooms, and common areas and help with laundry. • Wash, dry and sort laundry according to facility procedures, • Must communicate clearly with residents, • Clean assigned apartments and common areas, • Must be able to lift, push and pull at least 50 pounds Qualifications: • Previous cleaning experience in residential or healthcare facility preferred, • Must be at least 18 years of age, high-school education/GED., • Understand instructions in English and communicate with supervisor and residents in English, • Familiarity with cleaning materials and equipment, • Laundry: 1 year (Preferred), • Janitorial: 1 year (Preferred) Additional Benefits: Dental Reimbursement Schedule: • Morning shift, 37.5 hours per week, • Monday to Friday, • Weekends as needed

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: • Review work orders and shop drawings to confirm dimensions and material availability, • Set up workstations, fixtures, and robotic welding equipment, • Perform dry runs on initial pieces to verify accuracy, • Operate the robotic welding system to complete production jobs, • Inspect completed work and sign off on operationsRequirements: Knowledge, Skills & Abilities • Ability to read and interpret shop drawings, • Basic math skills and experience using measuring tools, • Familiarity with robotic welding equipment, • Ability to organize, prioritize, and manage multiple tasks, • Effective verbal and written communication skills, • Ability to stand for extended periods, • Ability to lift, push, and pull up to 25lbs unassisted Work Environment • Typical machine shop environment, • Willingness to work additional hours as needed, • Willingness to be cross trained on multiple machines Minimum Qualifications • 5 YEARS EXPERIENCE - MINIMUM, • High school diploma or GED, • Experience in a shop environment with robotic and plasma cutting equipment, • Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionPOSITION: Shift Operator, Monitoring & Diagnostics LOCATION: Houston, TX (Hybrid remote work 50/50 Split) STATUS: Hourly Non-Exempt JOB SUMMARY ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions of the job include, but are not limited to, the following: • Monitor Gas Turbine and Auxiliary plant equipment as part of a 24-hour 7-day team based in one of our Monitoring and Diagnostic Center locations., • Work with a variety of different heavy frame Gas Turbines and make recommendations on operations, maintenance, troubleshooting, and follow a problem to the root cause., • Leverage in-house GT experts (controls, performance, design, etc.) for assistance as required., • Utilize AVEVA (OSIsoft) PI tools for monitoring, analysis and graphical representation of Gas Turbine, Steam Turbine and HRSG operations., • Continue as a team to build a knowledge base of known issues and their indicators for reference for future troubleshooting., • Clearly communicate corrective actions to customers via e-mails and/or phone calls., • Required to be available to respond during working and non-working hours., • Facilitate and actively work to ensure all documentation is correct, complete, timely, and recorded appropriately., • Able to work a 24/7 rotational 5 shift 12-hour Dupont and overtime as necessary (Hybrid remote work scheduled as nights and weekends, at this time), • Heavy focus on Gas Turbine operations specifically GE 7FA, GE7EA, SW501, and M501 units., • Shift operators will also be responsible for monitoring of Centrifugal Compressors use in the LNG industry with GTs as the prime movers., • Must complete EHS assigned regulatory training for work area as described by PSM’s EHS Training Matrix, • Could require some elective travel time., • Other duties as assigned MINIMUM REQUIREMENTS Education & Training • High School Diploma or GED equivalent, • 2-year Degree from technical/vocational school OR equivalent experience from Military, Power Generation, or LNG facilities., • Strong computer competency including Microsoft Office, web-based applications (Pi Vision, SharePoint), remote desktop connections, VPN’s, cyber security, and navigating computer file/folder structures. Skills/Experience • 2+ years of working in Heavy Frame Power Plant environment or LNG Facility as an Operator, Technician, I&C, or in Engineering., • Working experience with GT control systems (GE, MHI, Ovation, and/or Siemens)., • Knowledge of general GT control philosophy, architecture, design, start up, and commissioning experience is preferred., • Strong mechanical aptitude and basic understanding of chemistry, physics, electricity, and mathematics., • Knowledge of GT support systems and associated supervisory instrument limits and alarms levels., • Strong computer skills including experience working with spreadsheets, databases, Process Information (PI) and word processing software. Preferred Skills • Experience in Gas Turbine commissioning, operations, mechanical, and diagnostic experience., • Ability to read and interpret Piping and Instrument Diagrams (P&ID) and Control Logic a plus., • Experience with Nuovo Pignone centrifugal compressors, John Crane dry gas seals, dry gas seal systems, and Gas Turbine/Centrifugal control systems., • Multilingual candidates (Spanish & Korean) are a plus Equal Opportunity Employer Veterans/Disabled

Job Description Machine Shop Operator - 2nd Shift Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program., • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed., • Review parts program file and select set tools in tool holder, turret, or cross slide location., • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required., • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area., • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications., • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear., • Indicate work to detect and eliminate run out., • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism., • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor., • Maintain workplace in neat and orderly condition. Qualifications/Requirements • GED or High School Diploma, • 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description Overview Tyndale is looking for a full time experienced Alterations Technician to join our Embellishments team. In this hands-on role, you’ll use your sewing and alterations expertise to customize and repair specialty garments to meet our customers’ exact specifications and Tyndale’s high standards for quality. From hemming and sleeve alterations to zipper replacements, patches, reflective tape, and other garment repairs, you’ll play an important role in ensuring every garment is customer-ready, accurate, and professionally finished. If you have strong attention to detail, experience with industrial sewing equipment, and take pride in quality craftsmanship, this is a great opportunity to bring your skills to a growing company with opportunities for advancement. Our embellishments team works onsite five (5) days a week, M-F in our North Houston, TX distribution center, working 2nd Shift, Monday–Friday, 3:00 p.m.–11:30 p.m. About Tyndale The Tyndale Company is a privately held, consecutive Top Workplace winner recognized in both the Greater Philadelphia and Houston markets, and an industry-leading national supplier of arc-rated flame-resistant clothing (FRC) to the energy sector, including utilities, oil and gas, transportation, chemical manufacturing, and NFPA 70E markets. We’re a family-owned business providing a retail-style apparel experience to hundreds of thousands of energy workers across the US and Canada. We’re the leading distributor of innovative FRC solutions, and the largest industrial supplier of Carhartt FR, Ariat FR, and Wrangler FR clothing. Responsibilities • Perform all phases of sewing and alterations;, • Verify orders: Check merchandise for the correct size, style, color, etc.;, • Prep the work according to what alteration is required;, • Hem/Sew Garments as needed, using overlock and single needle sewing machines or hemming machines., • Identify the appropriate components to be used to complete the repairs/customizations;, • Apply patches, Reflective Tape and sew on garments when necessary., • Install snaps utilizing the appropriate equipment., • Notify the team Supervisor of any issues that may arise, including garment quality, pick ticket accuracy, etc., • Perform other duties and tasks as assigned. Qualifications • High School diploma preferred, • Extensive sewing experience required., • Experience in alterations required;, • Experience & proficiency with industrial sewing equipment required;, • Excellent Attention to Detail;, • Ability to read a measuring tape;, • Familiarity with & competency in using hand tools to remove zippers;, • Prior use of electric hand tools (fabric cutters) a plus;, • The sewing skills required include hemming pants to the correct inseam, shortening sleeves, placing zippers in pant legs, and a variety of other sewing operations that involve the customization and repair of garments—replacing broken zippers, patching, re-sewing belt loops, etc. Work Environment/Physical Demands: Working conditions are designed to ensure your comfort and productivity in a pleasant, temperature-controlled room warehouse environment. Expectations include sitting at lengths of time, handling sharp objects such as scissors and sewing needles, and potentially lifting boxes weighing a maximum of 20 lbs or less without assistance. Benefits: • Health & Wellness: Comprehensive medical, dental, and vision insurance with competitive premiums. Paid parental leave. Mental health support through an EAP and partial reimbursement on copays, fertility support, and robust wellness programs with annual reimbursements., • Work-Life Balance: Many positions with Tyndale offer hybrid onsite + remote work schedules, generous PTO, paid holidays + a floating holiday, and more., • Financial Compensation: Competitive salary, 401(k) with matching, and bonus opportunities., • Career Growth & Development: Training/certification/tuition reimbursement programs and demonstrated paths for knowledge share and internal promotion opportunity., • Culture & Perks: Family-owned values, award winning culture, team-engagement events, casual dress code, company-sponsored charitable events and activities, and an inclusive workplace that values collaboration and integrity., • Safety: As part of our commitment to safety and comfort, all Distribution Center members receive an annual footwear stipend to purchase high-quality, work-appropriate shoes. This ensures our team is equipped with the right gear to stay safe, supported, and productive on the job. All qualified candidates are encouraged to apply online at www.tyndaleusa.com/careers - E.O.E #LI-GR1 #LI-Onsite

Job DescriptionBenefits: • Other Group Voluntary Insurance Coverage Options, • Critical Care Insurance, • Group Life Insurance, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources Job description: Founded in 1990, FERPA Precision Machine, Inc. is a family-owned business with 35+ years of precision manufacturing expertise. Known for our high-performance plastic seals and oilfield components, we’ve expanded into small- to medium-sized precision metal parts with a growing focus on aerospace. We blend advanced technology with a client-focused, quality-driven approach, and value each team member’s contribution in continuing our tradition of excellence. Learn more about FERPA here: https://ferpa-pmi.com/about-us Summary/Objective We’re hiring a CNC Mill Machinist! In this position, you’ll be responsible for machining precision components that support our high-quality machining services. You’ll be setting up CNC mills and producing components that meet demanding specifications. Our clean, air-conditioned facility is equipped with modern machinery and software to support your success. At FERPA, we value craftsmanship, innovation, and professional development—and we’re looking for someone who does too. We’re in the process of moving into a new facility next year and plan to invest in additional CNC mills to meet growing demand! Responsibilities • Set up and operate CNC milling machines, ensuring precise material loading and accurate configuration for optimal machining performance., • Configure tool registers, apply offsets/compensations, and utilize conditional switches as required by job specifications., • Interpret and apply information from blueprints, technical drawings, and schematics to guide machining operations., • Perform detailed inspections using micrometers, calipers, gauges, and other precision measuring instruments to verify part conformity., • Confirm machine settings and verify compliance with established quality standards., • Select appropriate cutting tools, machine settings, and workholding fixtures tailored to specific production requirements., • Conduct routine maintenance and ensure machines are properly calibrated and in safe working condition., • Monitor active operations, observe drilling, grooving, and cutting, and make real-time adjustments to ensure efficiency and quality., • Troubleshoot and resolve mechanical or process issues related to the CNC milling machines., • Adhere strictly to all safety procedures and guidelines when operating equipment and handling materials., • Collaborate effectively with cross-functional teams to achieve production deadlines and quality objectives., • Maintain a clean, organized, and efficient work area in accordance with 5S or lean manufacturing principles., • Support additional tasks and job-related duties as assigned to meet business and production needs.Job Requirements/ Qualifications, • High school diploma or equivalent. Technical or vocational training in machining or a related field is preferred., • Minimum of 5 years of hands-on experience operating milling machines., • Familiar with editing Mastercam files for 3-axis and 4-axis CNC milling., • Strong understanding of CNC G-code and M-code programming., • This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.Skills and Competencies, • Skilled in reading and interpreting blueprints, technical drawings, and machining specifications., • Strong knowledge of metal properties, tooling selection, and cutting parameters., • Proficient in the use of precision measuring instruments, including micrometers, calipers, indicators, and gauges., • Experienced in interpreting tolerances, achieving precise surface finishes, and meeting stringent quality standards., • Proficient with FANUC-controlled CNC machines and G-code programming., • Hands-on experience in machining and setup operations, including part prove-outs and troubleshooting., • Proven ability to maintain tight tolerances and comply with SAE aerospace standards., • Experienced in machining a wide range of materials, including plastics, stainless steels (300 Series, Nitronic 60), PH stainless steels (15-5, 17-4), aluminum bronze, MP35N, and Inconel., • Able to work independently, identify and resolve issues, and sustain efficient workflow., • Strong understanding of shop math, mechanical principles, and CNC milling fundamentals., • Highly detail-oriented with excellent time management and organizational skills.Additional Preferred Qualifications, • AS9100 and ISO 9001 experience or familiarity is a plus., • Preferred experience in a job shop environment.

Job DescriptionReports to: Manufacturing Supervisor Primary Responsibility: Support MIRATECH customers with work in our service center and warehouse. Operating equipment and support product creation and order fulfillment. Shift: Monday - Thursday, 3:00 pm to 1:00 am What You'll Do:Operate manufacturing equipment, especially shears to cut materialsOrganize materials using the forklift to transport themMaterial preparationOther duties as assigned What Qualifies You:High School Diploma.Good problem-solving skills and the ability to work independently or as part of a team.Ability to use welding equipment and related tools effectively and safely.Strong attention to detail and a commitment to producing high-quality work.Excellent communication and interpersonal skills.Must be able to lift up to 50 lbs. individually and heavier items with a team lift. What Sets You Apart:(Beneficial Knowledge or Experience)Experience in FabricationPrior experience operating forkliftsPrior experience operating manufacturing equipment, especially shears Physical Requirements:Must be able to lift up to 50 lbs. individually and heavier items with team liftStanding, bending, and walking for extended periods of time Benefits and Perks:Health, Dental & Vision InsuranceAnnual Bonus Program$350 Annual Wellness CreditFlexible Spending Account (FSA)401k with match up to 5%Life insuranceDisability insurance5 days of paid sick leave annually (prorated based on start date)15 days PTO annually (prorated based on start date) Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. Job Posted by ApplicantPro

Job Description Finishing Operator | $18-$19 an hour | 1st Shift Monday through Friday 7am to 5pm What Matters Most • Competitive pay rate of $18 to $19 an hour based on experience, • Schedule: Monday through Friday 7am to 5pm, • Location: South Houston, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description We are seeking a skilled Finishing Operator to assist in threading, grooving, and beveling pipes. You’ll be part of a dynamic team in a supportive environment where your expertise will be valued and your career growth encouraged. If you have a passion for precision and innovation, apply today to take the next step in your career. Responsibilities:, • Machine operation “groover” machine, • Grooving pipe for 8 hours, • Runs pipe through machine – pipe is either 20’ or 40’ in length, • Pipe is fed into machine from a nearby rackQualifications and Requirements:, • High School Diploma or GED required., • Experience in threading, grooving or beveling material., • Capable of being trained on thread specification and use proper QC tooling, • Ability to work overtime as needed., • Capable of regularly lifting and moving objects up to 50 lbs., • Must pass pre-employment screenings. Benefits and Perks:, • Competitive Salary: $18 to $19 an hour - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization: Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $18 to $19 an hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical to allow for future & continued salary growth

Job DescriptionDescription: POSITION SUMMARY: The Machine Operator Level 2 is responsible for accurately and timely manufacturing machined components used in the assembly of final products. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: The Machine Operator Level 2 is accountable for the following functions and responsibilities: • Run basic programs., • Report on correct production quantity as needed., • Utilize basic part inspection equipment., • Basic print interpretation., • Accurately place part identification on finished goods., • Detect and report machine malfunctions., • Detect and identify out-of-tolerance production., • Execute required tool offsets in tool list to maintain required tolerance., • Identify abnormal operating conditions and notify maintenance., • Record downtime in electronic system., • Maintain weekly NCR levels and rejection rate below 6% of work order., • Maintain a scrap rate below 5%, • Conduct required preventive maintenance (PM's) at assigned station., • Consistently achieve daily production target of 90%., • Utilization of optical comparator., • Removal of CNC waste., • Basic understanding of G&M code., • Manually "prep" oversized blanks without assistance., • Troubleshoot machine, i.e., clear alarms, clogged coolant lines, adjust jaws., • Produce parts that require mid-range degree of accuracy., • Perform other functions and responsibilities as assignedRequirements: QUALIFICATIONS/EXPERIENCE REQUIRED: The Machine Operator Level 2 must at a minimum possess the following: • A minimum of a high school diploma or GED., • A minimum of one-year experience operating a CNC machine., • Ability to work in a team-oriented, high-pressured, and fast-paced environment., • Ability to comprehend production requirements., • Basic computer literacy skills., • Must be self-motivated and be able to work with little or no supervision., • Strong time management skills with the ability to effectively operate multiple machines at one time. PHYSICAL REQUIREMENTS: The Machine Operator Level 2 must be able to: • Lift a minimum of 50lbs, repeatedly, without assistance and up to 100lbs with assistance., • Push/pull heavy objects with the proper equipment., • Wear the appropriate PPE when required (i.e., safety glasses or side shields, steel-toe footwear, etc.)., • Stand for long periods of time; up to 8-12 hours a day.

Job DescriptionMachine Operator Position Snapshot We are a seeking a highly motivated, safety-minded individual who wants to work as a machine operator in an industrial manufacturing setting. If you enjoy being hands-on with machinery and utilizing your mechanical interests and skills in a manufacturing environment and being a part of a team, then this position is for you. Essential Duties and Responsibilities A machine operator is commonly expected to know how his/her equipment operates and be able to identify and repair simple mechanical problems like stalls or jams. Workers hired into this position will be trained to operate various machines and learn processes related to manufacturing steel wire products. Mechanical and analytical skills are required for this job. To be successful in this role you will: • Practice safe work habits as an individual and with co-workers., • Work effectively in a team environment., • Adhere to guidelines related to PPE (Personal Protective Equipment)., • Know safety equipment and be aware of machine safety procedures., • Know and understand basic mechanical processes and equipment function principles., • Conduct equipment inspections for proper operation and mechanical integrity., • Assist in the repair and maintenance of machines and facilities as required., • Document production information on tally sheets and make basic production entries into a computer., • Must understand basic mathematical principles and know measurement processes such as length, diameter, weights, and counts., • Assume duties of other operators as required and assist in other areas of the facility as needed. Experience and Education: • Manufacturing experience is a preferred but not required, • Forklift experience preferred, but will provide certification training, • High School diploma or equivalent, • Ability to complete simple forms and understand simple written instructions., • Ability to perform simple arithmetic skills involving addition, subtraction, multiplication, division, fractions, and decimals., • An equivalent combination of education and work-related experience may be acceptable. Physical Demands Workers are frequently required to stand, walk, bend, stoop, crouch, and lift or carry heavy materials—often over 50 pounds—throughout their shift. Tasks will involve operating or working near heavy machinery, using hand and power tools, and performing repetitive motions. Employees must also be able to tolerate exposure to heat, cold, loud noise, and other environmental factors such as dust, vibration, and slippery surfaces. Personal protective equipment (PPE) is required, and physical agility, coordination, and situational awareness are critical to performing job duties safely and effectively in our industrial setting. Work Environment The work environment for this position is an industrial manufacturing plant, with employees regularly exposed to physical and environmental challenges. Workers are continuously (70–100% of the time) around moving and potentially dangerous machinery and are subject to loud noise levels that require hearing protection. Frequently (30–70% of the time), they may encounter heat from both weather and industrial processes, as well as cold weather conditions. Occasionally (up to 30% of the time), the environment may include wet or humid conditions, slippery floors or ramps, vibration from equipment, exposure to outside weather, dust, electrical shock hazards, and contact with oil, grease, or solvents. Proper personal protective equipment (PPE) and adherence to safety protocols are essential in maintaining a safe and productive workspace in this industrial setting. For your hard work, you receive: • Competitive base pay based on experience., • Bonus eligibility based on organizational performance, safety, and attendance, • Paid time off including holidays and vacation, • Excellent benefits to include medical, dental, vision, company paid life/short-term disability/long-term disability insurance, flexible spending accounts (FSA), health savings account (HSA), 401(k) with match, company paid tele-health, stock purchase plan, tuition reimbursement assistance, and Employee Assistance Plan (EAP) These duties may be modified or changed at any time at the sole discretion of management either orally or in writing. The above statements are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of this position. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. INSTEEL is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you are qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request accommodation, contact a Human Resources Representative. Applicants must be authorized to work for ANY employer in the U.S. We are unable to consider applicants residing in locations outside the US requiring Visa sponsorship at this time. About the Company: Insteel Industries is the nation’s largest manufacturer of steel wire reinforcing products for concrete construction, including prestressed concrete strand and welded wire reinforcement such as engineered structural mesh and concrete pipe reinforcement. Founded in 1953 and headquartered in Mount Airy, NC, Insteel operates 11 manufacturing plants across the U.S. and has a dedicated engineering services division. As a publicly traded company, our goal is to be the supplier of choice by delivering superior value to our customers. Learn more at insteel.com/careers. Fraud Prevention Notice: Please note that Insteel Industries will never ask applicants to purchase equipment, send money, or provide payment information at any point in the hiring process. We may request certain personal information only after an official offer has been extended and the background check and drug screen have been successfully completed. If you receive a request for sensitive information or payment before these steps, it is not from our company. To protect yourself, please report any suspicious activity to our HR team by calling us at (336) 786-2141. Powered by JazzHR Kushq9G6qF

Job Description Overview The Tyndale Company, an industry-leading employer and multiple Top Workplace winner, is looking for a detail-oriented Embroidery Machine Operator to join our production team! In this hands-on role, you’ll help create high-quality, customized garments by operating embroidery equipment and ensuring every logo is applied accurately and meets our quality standards. From setting up garments and selecting designs to monitoring production and inspecting finished embroidery, your attention to detail will help ensure our customers receive products that look great and are completed on time. No previous embroidery machine experience is required. If you’re dependable, comfortable learning new technology, enjoy hands-on work, and take pride in producing quality results, this could be a great opportunity to develop specialized production skills with Tyndale. Second Shift: Monday through Friday, 3:00pm – 11:30pm To learn more about our Machine Operator role, please check out this short video: https://vimeo.com/311897576/0114b6f26b About Tyndale The Tyndale Company is a privately held, consecutive Top Workplace winner recognized in both the Greater Philadelphia and Houston markets, and an industry-leading national supplier of arc-rated flame-resistant clothing (FRC) to the energy sector, including utilities, oil and gas, transportation, chemical manufacturing, and NFPA 70E markets. We’re a family-owned business providing a retail-style apparel experience to hundreds of thousands of energy workers across the US and Canada. We’re the leading distributor of innovative FRC solutions, and the largest industrial supplier of Carhartt FR, Ariat FR, and Wrangler FR clothing. Responsibilities • Organize daily workflow to support efficient, on-time embroidery production;, • Review work orders to identify the correct logo, colors, placement, and embroidery specifications for each garment;, • Prepare garments for embroidery by properly positioning and securing embroidery hoops;, • Scan work orders and enter the appropriate designs and specifications into embroidery equipment using specialized software;, • Verify logo placement and alignment before beginning production;, • Operate and closely monitor embroidery machines to ensure equipment is functioning properly and garments are produced accurately;, • Inspect finished embroidery for quality, placement, alignment, and consistency;, • Identify production or equipment issues and partner with production leadership to resolve them;, • Perform routine daily maintenance on embroidery equipment;, • Trim backing materials from garments as needed during production;, • Maintain appropriate levels of thread, backing, and other supplies at the workstation;, • Communicate and collaborate with team members to keep production moving efficiently;, • Meet established production and quality standards;, • Support additional production projects and responsibilities as needed. Qualifications • High school diploma or equivalent preferred;, • Previous embroidery machine experience is a plus, but not required;, • Excellent attention to detail with the ability to consistently produce accurate, high-quality work;, • Ability to remain focused and attentive while operating production equipment;, • Basic computer skills and ability to learn specialized production software;, • Ability to meet established production standards while maintaining quality expectations;, • Knowledge of fabrics and their characteristics is a plus, but not required;, • Experience with embroidery software or Microsoft Excel is a plus;, • Ability to safely lift up to 20 pounds without assistance.Work Environment & Physical Requirements This is a physically active production position performed in a pleasant, temperature-controlled environment. The role requires standing throughout the workday and regularly working with embroidery equipment, garments, and production materials. Employees must be able to lift and move bins weighing up to 20 pounds without assistance. Benefits: • Health & Wellness: Comprehensive medical, dental, and vision insurance with competitive premiums. Paid parental leave. Mental health support through an EAP and partial reimbursement on copays, fertility support, and robust wellness programs with annual reimbursements., • Work-Life Balance: Many positions with Tyndale offer hybrid onsite + remote work schedules, generous PTO, paid holidays + a floating holiday, and more., • Financial Compensation: Competitive salary, 401(k) with matching, and bonus opportunities., • Career Growth & Development: Training/certification/tuition reimbursement programs and demonstrated paths for knowledge share and internal promotion opportunity., • Culture & Perks: Family-owned values, award winning culture, team-engagement events, casual dress code, company-sponsored charitable events and activities, and an inclusive workplace that values collaboration and integrity., • Safety: As part of our commitment to safety and comfort, all Distribution Center members receive an annual footwear stipend to purchase high-quality, work-appropriate shoes. This ensures our team is equipped with the right gear to stay safe, supported, and productive on the job. All qualified candidates are encouraged to apply online at www.tyndaleusa.com/careers - E.O.E #LI-GR1 #LI-Onsite

Job DescriptionDescription: Responsibilities not limited to: • Saw Operator, • Machine Operator Knowledge/Skills/Abilities • Ability to follow and carryout verbal and written instructions, • Ability to operate an overhead crane (preferred but not required) Competencies • Ability to work in an environment that produces excellent quality and quantity work, • Ability to communicate – verbally and writtenRequirements: Work Environment • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross-trained on different machinesRequirements, • High School diploma or GED, • Physical strength to perform semi heavy and bulky manual labor Physical Requirements • Able to stand for long periods of time, • Able to lift, push, and pull 50 pounds unassisted ----------------------------------------------------------------------------------------------------------- • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionDescription: The Drill Press Operator will have experience with the following: • Cutting, • Drilling/Taping, • Shear Press and Bend Operator, • Saw Operator, • Machine OperatorRequirements: Minimum Qualifications • High School diploma or GED, • Physical strength to perform semi heavy and bulky manual labor Work Environment • Typical machine shop environment., • Able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross-trained on different machines. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionDescription: Responsibilities not limited to: • Saw Operator, • Machine Operator Knowledge/Skills/Abilities • Ability to follow and carryout verbal and written instructions, • Ability to operate an overhead crane (preferred but not required) Competencies • Ability to work in an environment that produces excellent quality and quantity work, • Ability to communicate – verbally and writtenRequirements: Work Environment • Typical machine shop environment., • Willing and able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross-trained on different machinesRequirements, • High School diploma or GED, • Physical strength to perform semi heavy and bulky manual labor Physical Requirements • Able to stand for long periods of time, • Able to lift, push, and pull 50 pounds unassisted ----------------------------------------------------------------------------------------------------------- • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionDescription: The Drill Press Operator will have experience with the following: • Cutting, • Drilling/Taping, • Shear Press and Bend Operator, • Saw Operator, • Machine OperatorRequirements: Minimum Qualifications • High School diploma or GED, • Physical strength to perform semi heavy and bulky manual labor Work Environment • Typical machine shop environment., • Able to work additional hours as needed to ensure responsibilities are met., • Willing to be cross-trained on different machines. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionDescription: Are you ready to make an impact? Are you ready to be a part of a stable and growing organization perfect to grow yourself and your career? Then read on: At Trace-A-Matic we believe the people are our biggest assets! We provide a friendly, clean and safe work environment for all to grow and thrive! Our core focus is to achieve excellence in complex precision machined components and customer satisfaction. We also offer Gainsharing! So, if the company makes a profit, they split it 50/50 with the employees, which gets paid out on a quarterly basis! Trace-A-Matic Offers: • Health, • Dental, • Vision, • 401K, • Gain Sharing, • Tuition Reimbursement, • 10 paid holidays, • Service Based PTO, • Tuition Reimbursement, • Safety Shoe and Safety Glasses Reimbursement Trace-A-Matic is hiring 1st Shift and 2nd Shift CNC Mill Machinists, see below: CNC Machinist Job Overview: You would perform set up, operation, and programming of complex machined components for many different industries on CNC Mills including Horizontal Boring Mills and Vertical Mills. Responsibilities & Duties • Ability to set up all repeat jobs that are fully documented, • Run the first piece to print specification, • Knowledge of programming and may have ability to make edits or program., • Manually inspect the part to the inspection sheet criteria, • Ability to read blueprints to a medium/high level and correlate that back to the inspection protocol and documentation, • Knowledge of GD&T tolerancing, • May run multiple machines simultaneously as a production cell, • Advanced shop math with trigonometry and geometry, • Mentor and train operators, • Other duties as neededRequirements: Qualifications: • High School Diploma/ CNC technical diploma preferred, • 5+ years of Machining experience, • Individuals should show intelligence, mechanical interest/aptitude, good math skills and most importantly willingness to learn. Type: CNC Machinist, Full Time, 1st Shift (6am to 6pm) and 2nd Shift (6pm to 6am) Company: Trace-A-Matic Location: Houston, TX Salary Description: $26.00 - $33.00/hour Trace-A-Matic is an Equal Opportunity Employer. EOE/M/F/D/V.

Job Description THIS POSITION IS A TRAVELING OPERATOR ROLE SUPPORTING PROJECTS IN MARKETS ALL ACROSS THE UNITED STATES. A CLASS A CDL WILL BE REQUIRED FOR THIS POSITION. WHO WE ARE EPC was conceived and operates to provide anyone who desires to provide for their families through the work they do, an opportunity to do so. Everything we do revolves around the vision of a company that provides safe, quality work, driving customer demand that ultimately results in the creation of new job opportunities in the markets we serve. We focus heavily on our Core Values and expect all our employees to operate with those Core Values in Mind. These Core Values are Live Safe, Customer First, Do the Right Thing, Be at Team Player, and Be Productive. WHAT WE’RE LOOKING FOR The Operator III will be using equipment such as mini-excavators, trenchers, plows, and reel trailers to perform duties of installation, operation, repair, and maintenance of Telecommunications outside plant including fiber, copper and coax. Daily work will involve traveling to different job site locations, survey, plan and execute placing client facilities. As the Operator III is the senior operator role in the organization, this position is also responsible for training and coaching new hires and others in similar roles. WHAT YOU GET TO DO • Reviewing blueprints or other plans to determine where and how to place plants., • Analyze job locations for utility lines, permitting, and traffic control to complete construction activities without quality defects, safety incidents or any type of property damage., • Read and understand utility locations and above ground indicators to ensure the safety of the crew and a high level of productivity., • Complete daily inspections and reporting of maintenance issues on vehicles, trailers, and equipment., • Perform service, safety checks, check oil and fluids, and minor repairs on equipment., • Perform construction work such as digging holes, setting handholes/peds and placing duct to poles., • Strive for optimal production while working safely and performing quality work., • Ensures all work is performed to quality standard while always complying with proper safety standards/procedures and work practices/policies & procedures according to EPC and OSHA/ANSI standards., • Maintain quality and cleanliness of tools, equipment, and vehicles., • Train new hires and other colleagues on job-related tasks. WHAT WILL HELP YOU STAND OUT • High School Diploma or equivalent preferred., • Valid U.S. Driver’s License., • Valid Class A CDL required., • At least 5 years’ prior experience operating related heavy equipment is required., • Prior experience operating relevant heavy equipment in a utilities construction environment around live utilities is required., • OSHA 30 Certification is required., • Green Belt Certification is required., • Heavy Equipment Operator Certification is required., • Knowledge of reading prints., • Ability to operate equipment, including, but not limited to power tools, electronic testing equipment, air compressor and heavy equipment such as bucket truck etc., • Must have the ability to work safely, with or without supervision., • Excellent communication skills., • Prior experience identifying above or below ground utilities or hazards. WHAT WE ARE OFFERING • Full-time, permanent opportunity in a fast-growth company!, • Opportunity to work autonomously. None of that micromanaging garbage. We hate that!, • Competitive pay, • Comprehensive benefits package (medical, dental, vision), • Retirement plan with company match, • Company paid time-off, • Weekly paychecks!, • Career development and growth opportunities WHAT TO EXPECT • Outdoors environment which may require exposure to elements, including but not limited to wind, rain, heat, cold, snow, sleet, mud, etc., • May be required to stand, sit, bend, twist, and reach as part of the job., • Extended periods of standing on your feet may be required., • May be required to lift up to 80 pounds., • Must be able to pass a background check, drug screen, or other job-related pre-hire screenings related to the job., • Extended overnight travel (2+ consecutive weeks) via plane, train, automobile, or bus is required. Disclaimer: The above information on this description has been designed to include the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. We are proud to be an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. We retain our right to at-will employment at all times and this job description is not meant to be intended as a contract or guarantee of employment at any time.

Job Description Service Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a Machine Operator Trainee in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary: Our Machine Operator Trainees perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. Tasks/Duties/Responsibilities: • Prepare and setup machines for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employees, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobSchedule: Must be available to work the following times: - 1st Shift - 7am - 3:30pm, • 2nd Shift - 3pm - 11:30pm, • 3rd Shift - 11pm - 7:30amThe perks of joining our Team:, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices, • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • Predictable, set schedules that support work-life balance - no rotating shifts, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions, • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs, • Tuition reimbursement up to $15,000 - annually to support your continued education and career growth, • Annual bonus potential up to $3,000 - through performance incentive programs, • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year, • See all benefits we offer here#ZR