Trabajos hvac controls technician en New York, New YorkCrear alertas

Job DescriptionJob Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJPay: $34/hrType of Placement: Direct HireShift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 13, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Who Are We: Founded in 2010, Grand Fitness Partners is a leading Planet Fitness Franchisee, owning and operating 90+ locations. We strive to achieve Planet Fitness’ mission to enhance people’s lives by providing a high-quality fitness experience in a welcoming, “Judgment Free Zone.” Who You Are: The Facilities Technician is responsible for performing skilled maintenance and repair work across various trades, including fitness equipment, electrical systems, plumbing, HVAC, painting, and carpentry. This role is essential to ensuring the efficient operation of club facilities. The ideal candidate will have a minimum of three 3 years of maintenance experience. While familiarity with fitness equipment maintenance (both strength and cardio) is preferred, it is not required. This position requires a highly collaborative team player who can contribute strategically to the team’s success. As a Facilities Technician, you will play a key role in the daily operations of the company, working closely with the Facilities Coordinator, Club Operations, and other cross-functional teams to maintain and improve facility functionality. Income: $26.00 Per Hour Duties and Responsibilities: • Perform routine maintenance, inspections, and repairs on fitness equipment (both strength and cardio), plumbing fixtures, HVAC systems, and electrical systems., • Manage building automation systems, including card access control, lighting controls, and electronic tracking systems., • Conduct preventive maintenance and emergency repairs on facility infrastructure, including drywall repair, painting, carpentry, and general upkeep., • Troubleshoot and address issues related to water leaks, electrical faults, and malfunctioning equipment or assets., • Oversee the installation and maintenance of plumbing fixtures and other equipment., • Ensure all repairs and maintenance work meet safety regulations and company standards., • Provide oversight and management of external vendors and contractors to ensure quality work and adherence to schedules., • Minimum of 3 years of experience in facility maintenance or a related field, preferably in a commercial or multi-site setting., • High school diploma or GED equivalent is required., • Must possess a valid and current driver's license and pass driver's license verification. Technical Skills: • Proficiency in various trades, including electrical, plumbing, HVAC, carpentry, and general maintenance work., • Familiarity with fitness equipment maintenance (strength and cardio) is a plus., • Competency with ticketing systems, such as CMMS (Computerized Maintenance Management Systems)., • Competency in the use of hand and power tools for repairs and maintenance., • Basic computer skills, with the ability to learn and utilize new software as needed., • Working knowledge of Microsoft Office is a plus. Core Competencies: • Collaboration: A team-oriented mindset with strong communication skills for working with cross-functional teams and external vendors., • Problem Solving: Ability to troubleshoot and resolve technical issues effectively and efficiently., • Attention to Detail: Meticulous approach to maintenance work, ensuring tasks are completed thoroughly and accurately., • Adaptability: Capacity to handle diverse tasks and adjust to changing priorities in a fast-paced, deadline-driven environment., • Customer Service: Strong focus on delivering high-quality service to internal and external stakeholders. Physical requirements: • Must be 18 years of age or older., • Ability to stand, walk, bend, stretch, push, pull, and maneuver for extended periods to service and maintain machinery., • Must be able to lift and carry up to 75 pounds., • Capability to visually inspect machines and perform hands-on repairs or maintenance as needed., • Ability to climb ladders Travel and GFP Benefits: • Travel to and from locations required to maintain and support facilities across multiple sites., • Health, Life, Dental and Vision Insurance for Full-time Techs, • 401(k) Plan, • Company 401(k) Matching Contributions, • Club and Black Card membership

Job Description Kari-Out® supports food on the go with a broad portfolio of products for the foodservice industry, including packaging, tableware, sauces, wipes, and ingredients. Since the 1970s, we have built a reputation for delivering high-quality products while maintaining a strong commitment to sustainable practices, serving both independent and national foodservice distributors. Established in 1964, Kari-Out is a family-owned company with extensive experience in food production and takeout packaging. Today, we employ hundreds of team members across multiple locations nationwide, with over 1 million square feet of operational space. As we continue to expand, Kari-Out® remains focused on innovation, product excellence, and strong partnerships. Our continued success is powered by our people and our dedication to meeting the evolving needs of our customers. If you’re seeking an opportunity to work in a collaborative environment that challenges the status quo and prioritizes customer success, we encourage you to apply. About the Role: We are currently seeking a skilled Maintenance Technician to join our team at our sauce manufacturing facility in Totowa, New Jersey. The Maintenance Technician plays a critical role in ensuring the smooth operation and safety of facility infrastructure by performing a wide range of repair and maintenance tasks. This is a 3rd shift position, working Monday through Friday from 11:00 PM to 7:00 AM. This position requires hands-on expertise in mechanical, electrical, and structural systems to diagnose issues and implement effective solutions promptly. The technician will be responsible for maintaining plumbing systems, electrical wiring, and mechanical equipment to prevent downtime and extend the life of assets. Additionally, the role involves routine inspections, precision measuring, and carpentry work to uphold facility standards and compliance with safety regulations. Ultimately, the Maintenance Technician contributes to a safe, efficient, and well-maintained environment that supports overall organizational productivity. Responsibilities: • Perform routine and emergency maintenance on plumbing, electrical, mechanical, and structural systems within the facility., • Use precision measuring tools to assess and ensure the accuracy of repairs and installations., • Install, repair, and maintain drywall, carpentry elements, and other building components as needed., • Climb ladders and access confined spaces safely to reach equipment and infrastructure requiring service., • Diagnose mechanical system malfunctions and execute timely repairs to minimize operational disruptions., • Maintain accurate records of maintenance activities, including parts used and work performed., • Collaborate with facility management to prioritize maintenance tasks and schedule preventive maintenance., • High school diploma or equivalent., • Proven experience in maintenance work involving plumbing, electrical wiring, and mechanical repairs., • Ability to read and interpret technical manuals, blueprints, and schematics., • Physical ability to climb ladders, lift heavy objects, and perform manual labor., • Certification or vocational training in maintenance technology or a related field., • Experience with precision measuring instruments and advanced carpentry techniques., • Familiarity with safety regulations and compliance standards in facility maintenance., • Basic knowledge of HVAC systems and controls., • Employee Assistance Program, • Medical, dental, and vision coverage, • Flexible Spending Accounts (FSAS), • Wellness Program, • Voluntary Benefits, • 401(k) plan, • Holiday pay

Job DescriptionSenior Facilities TechnicianAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Life Sciences, Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Senior Facilities Technician position is responsible for performing and documenting the required maintenance and monitoring of the facility, systems and equipment. The required duties include execution of Preventive and Corrective/General/Emergency maintenance on the facility’s mechanical systems and equipment, installation of new equipment and general plumbing, electrical and carpentry work, operation of the facility’s systems, including HVAC, environmental monitoring and BMS systems, and other duties as assigned. The position is required to perform the listed duties to minimize equipment downtime, support projects, and ensure that the needs of internal and external customers are met. The objective of this position is to ensure the facility is maintained in a state of maximum uptime and reliability, and provide a safe, clean and efficient environment. • Monitor and respond to equipment or facility alarms, • Travel to and support different sites when necessary., • Work with facilities, engineering and operations to ensure schedules are maintained and delays are properly communicated to customer., • Be available to work nights or weekends, on a rotating basis, to service company needs., • Maintain proper stock, parts, tools, and safety equipment., • Take orders from supervisors for maintenance and repair of systems and buildings, • Clear and clean job sites of debris and other hazardous materials and ensure that they are restored to their original states, • Assist mechanics and other technical staff in testing, cleaning and repairing utility systems, • Provide support in repairing potholes and gutters, • Assist office staff in custodial services and grounds keeping activities, • Clean and maintain floor surfaces, ceilings and windows, • Empty trash receptacles and ensure appropriate disposing off of trash, • Clean restrooms and replenish supplies, • Move equipment and furniture around the building, • Assist stock personnel in handling inventory duties along with providing support in receiving, verifying and storing office supplies, • Maintain full knowledge of the environmental monitoring system as required for monitoring equipment and troubleshooting issues as they relate to equipment and the facility Systems., • Perform all assigned PM’s and WO’s on equipment., • Document all work as performed according to cGMP’s and HCATS SOP’s., • Provide ongoing insight to Supervisors where SOP’s and PM Job Plans need to be updated. Assist Supervisors as required in the preparation of change controls or other required documentation., • Maintain cleanliness of the Facility and Maintenance areas., • Maintain 100% training records for all required training., • Provide 24-hour emergency response as required., • Perform any work required to ensure the safety of the facility and staff, including snow/ice removal as required., • Coordinate contractors, ensure contractors are properly trained and the training is documented before any work is performed., • Perform all duties in accordance with all applicable safety regulations., • Monitor overall job environmental, health and safety aspects and understands the risks and liabilities associated with various facilities maintenance and repair activities., • Must be able to recognize hazard conditions, take appropriate work place safety measures and wear appropriate personal protective equipment to suit work environment.REQUIREMENTS, • 3 to 5+ years of experience in Facility Maintenance., • Good analytical skills and attention to detail with ability to read and interpret blueprints, plans, and manuals., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, ensuring job is done correctly the first time., • Experience in a cGMP environment preferred., • Must be able to communicate clearly and effectively, both written and verbally., • Must be able to work independently and in a team environment, • Must train and become gown qualified to enter and work in classified manufacturing areas., • Valid driver’s license and clean driving record, • Must be able to pass drug test(s) as required by company, • This job may require occasional evening and weekend work.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: We are hiring an Industrial Maintenance Technician with strong experience in conveyor systems, industrial controls, and food packaging equipment. This is a hands-on technician role within our maintenance team. While the title remains Industrial Maintenance Technician, this position will serve as a technical backbone of the operation, owning complex troubleshooting, supporting automation systems, and driving equipment uptime across conveyors, packaging equipment, and facility systems. The primary focus is conveyor and controls troubleshooting, with additional responsibility for packaging machinery and general facility maintenance. As we grow our fulfillment and automation footprint, conveyor reliability, packaging performance, and controls competency are critical to our operation. This role plays a key part in reducing downtime, improving system stability, and strengthening our overall maintenance capability. You won't just be fixing equipment. You'll be helping build a more reliable and scalable operation. This is a full-time position with scheduled hours of 7:00 a.m. to 5:30 p.m. on Monday, Tuesday, Thursday, and Friday. The schedule may be subject to change based on organizational and operational needs. How you'll make an impact: Conveyor & Material Handling Equipment (MHE) • Perform preventive and corrective maintenance on conveyor systems, including belts, rollers, pulleys, gearboxes, drives, and motors, • Troubleshoot electrical components such as photoeyes, proximity sensors, motor starters, contactors, and Variable Frequency Drives (VFD), • Diagnose system-level material flow issues to minimize downtime and prevent recurring failures, • Troubleshoot equipment faults using Programmable Logic Controllers (PLC) (programming not required, but logic comprehension expected), • Read and interpret electrical schematics, ladder logic, and control drawings, • Support troubleshooting of motor controls, safety circuits, relays, and distributed input/output systems, • Maintain and troubleshoot food packaging equipment, including pre-formed baggers, vertical form fill and seal (VFFS) machines, and pouch sealers, • Diagnose issues related to sealing systems, film tracking, forming tubes, temperature control, and pneumatic components, • Support warehouse automation systems, including robotics and Automated Storage and Retrieval Systems (ASRS), • Assist with installation, commissioning, and ongoing reliability improvements, • Perform maintenance on pumps, motors, and mechanical drive systems, • Support basic Heating, Ventilation, and Air Conditioning (HVAC) systems, • Complete general facility repairs as needed (mechanical, minor electrical, structural), • Follow Occupational Safety and Health Administration (OSHA) standards, • Adhere to Good Manufacturing Practices (GMP) and food safety requirements, • Follow Lockout/Tagout procedures and maintain safe work practices, • Bi-lingual in English and Spanish is strongly preferred, • 6+ years of industrial maintenance experience in a distribution, fulfillment, or food manufacturing environment, • Strong mechanical and electrical troubleshooting capability, • Deep hands-on experience with conveyor systems and material handling equipment, • Working knowledge of Programmable Logic Controllers (PLC) and industrial control systems, • Experience reading electrical schematics and ladder logic, • Experience maintaining food packaging equipment (VFFS, pre-formed baggers, pouch sealers), • Familiarity with robotics, automation systems, or Automated Storage and Retrieval Systems (ASRS) preferred, • Experience with Variable Frequency Drives (VFD), motors, pumps, and pneumatic systems, • Ability to independently diagnose complex equipment failures, • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $25 - $35/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at

Job DescriptionBenefits: • Dental insurance, • Health insurance About the Role: Were hiring a Facilities Technician to support the maintenance and operation of a large commercial facility with critical infrastructure. This is a great opportunity for someone with experience in building systems, HVAC, boilers, or electrical maintenance who wants to grow into a more specialized environment. Youll be responsible for maintaining essential building equipment such as chillers, air handlers, pumps, generators, boilers, and electrical panels, ensuring the facility remains fully operational 24/7. This is not your average maintenance jobyoull be joining a team that supports high-uptime environments. If youre reliable, mechanically inclined, and want to grow into a mission-critical facilities career, we want to hear from you. Key Responsibilities: • Perform daily walkthroughs, inspections, and preventative maintenance of building mechanical and electrical systems., • Monitor and maintain chillers, boilers, air compressors, air handlers, VFDs, lighting, and building controls., • Respond to facility alarms and troubleshoot building systems as needed., • Complete maintenance tickets and update work logs., • Support vendor coordination and ensure all work is performed safely., • Participate in emergency response protocols and support incident documentation.Preferred Background:, • 25 years of experience in building maintenance, mechanical/HVAC repair, facilities operations, or plant engineering., • Familiarity with boiler systems, chillers, pumps, or HVAC., • Experience reading mechanical drawings, wiring diagrams, or operating manuals., • Strong hands-on skills with tools and diagnostic equipment., • [Optional] Previous work in a critical facility, healthcare, or data center environment a plus.Certifications (Preferred but not required):, • High-Pressure Boiler License, • HVAC-R Certification, • Stationary Engineer License, • OSHA 10/30Traits We Value:, • Reliability and sense of urgency, • Strong attention to safety, • Willingness to learn and grow, • Good communication and teamwork

Job Description Currently we are looking for Mechanical Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $45hr - $55/hr Based on Certification & Experience Mechanical Inspector Role Overview The Mechanical Inspector provides specialized inspection, verification, and testing oversight for mechanical and HVAC systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable Mechanical Code and Energy Code requirements, as required by each project. The Mechanical Systems Inspector is responsible for verifying that mechanical systems, equipment, and associated components are installed in strict conformance with approved design documents, shop drawings, specifications, manufacturer requirements, and code provisions. Systems may include HVAC equipment, ductwork, piping, boilers, chillers, air handling units, exhaust systems, controls, and energy-related components. This role requires maintaining an active on-site presence during installation, testing, and commissioning activities, including witnessing functional performance testing, pressure testing, system start-ups, and test-and-balance (TAB) activities. The inspector coordinates closely with contractors, construction managers, commissioning agents, testing firms, and client representatives to ensure all required inspections and tests are performed at the appropriate stages of work. The Mechanical Systems Inspector plays a critical role in ensuring system performance, code compliance, life-safety coordination, energy efficiency, and operational readiness, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs), and verifying corrective actions and re-testing. • Work responsibilities may include but are not limited to the following:, • Inspection of HVAC equipment installation, supports, and clearances, • Verification of ductwork, piping, insulation, and labelling, • Inspection of boilers, chillers, pumps, and mechanical room installations, • Verification of fire/smoke dampers and coordination with fire protection systems, • Oversight of controls, sensors, and system integration, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • AABC Test and Balance Technician Certification, • Bachelors Degree in Mechanical Engineering (accredited institution or equivalent), • ICC Certification as a Residential Mechanical Inspector, • ICC Certification as a Commercial Mechanical Inspector, • ICC Certification as a Commercial Building Inspector, • ICC Certification as a Residential Building Inspector, • NEBB Air Balancer Certification, • NYC Licensed Class A and B Oil Burner Equipment Installer, • NYC Licensed Master Plumber In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Master Commercial HVAC Challenges – Join Northern Wolves Air Conditioning as a Senior Lead Technician! Position Title: Senior Lead HVAC Technician Company Name: Northern Wolves Air Conditioning Pay Range: $110,000–$129,000 per year + Year-End Bonus Employment Type: Full-Time Location: Brooklyn, NY Industry: Commercial HVAC / Mechanical Job Overview Northern Wolves Air Conditioning is seeking an elite Senior Lead HVAC Technician to anchor our field operations across New York City. This role isn’t just about tools and troubleshooting; it’s about leading by example. You’ll be the go-to expert on complex commercial HVAC systems, from startup to emergency response. If you thrive in fast-paced environments, are energized by solving mechanical challenges, and want to mentor the next generation of technicians, this is the opportunity to step into a legacy-making role. Who We Are At Northern Wolves Air Conditioning, you’re not just a number, you’re a key player. We tackle high-profile mechanical projects across NYC and invest in our people with real opportunities for growth. Our team values accountability, craftsmanship, and long-term careers, and we create an environment where professionals can build something that lasts. Join a team where integrity meets innovation, and where your skills are respected and your leadership is essential. Learn more at Key Responsibilities • Lead and execute complex commercial HVAC installations, repairs, and commissioning tasks., • Troubleshoot and resolve advanced system issues across VRF/VRV, chilled water, boilers, WSHPs, RTUs, controls, and hydronic systems., • Supervise field crews, ensuring quality work, safety standards, and code compliance., • Serve as the senior technical resource for both field and office teams., • Read and interpret construction drawings, submittals, and mechanical specifications., • Collaborate closely with project managers, superintendents, vendors, and inspectors., • 10-15+ years of experience in commercial HVAC systems., • Expertise across mechanical systems, diagnostics, and controls., • Proven field leadership experience - people naturally turn to you for answers., • Strong communication, problem-solving, and decision-making skills., • Ability to work independently and own results from start to finish., • NYC commercial HVAC experience strongly preferred., • EPA Universal Certification required., • Weekly Pay Cycle, • Paid Time Off (Vacation, Sick, and Holidays), • Company Vehicle & Mileage Reimbursement, • Tech Package – Smartphone or tablet provided, • Safety Equipment & Uniforms Provided, • Company Events, • Hybrid Field Role – Projects throughout the New York City metro area. We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job DescriptionBenefits: • 401(k), • Employee discounts, • Flexible Scheduling, • Competitive Compensation Job Description: Mazgan A.C. & Heating Repair is hiring a skilled HVAC technician with experience in both heating and air conditioning systems. We stay busy all year long heating in the winter, A/C in the summer, and steady service work in between. No slow seasons. Were looking for someone who can diagnose, repair, and install with confidence. Responsibilities: • Diagnose, repair, and maintain:, • Gas boilers (steam & hydronic), • Tank and tankless water heaters, • Central A/C and ductless mini-split systems, • Heat pump systems, • Perform electrical, refrigerant, and airflow troubleshooting, • Install and replace HVAC equipment, • Work with pumps, expansion tanks, zone valves, line sets, • Perform flushing, descaling, charging, and pressure testing, • Communicate clearly with customers and explain optionsRequirements:, • 25+ years HVAC experience, • Strong in both heating and A/C systems, • Ability to troubleshoot independently, • Valid drivers license, • Reliable and ready to workWhat We Offer:, • Strong pay based on experience, • Steady work all year (no slow season), • Growth opportunity, • Solid team environmentPreferred (not required):, • Experience with hydronic systems and controls (Tekmar, Taco, etc.), • EPA Certification, • Experience with gas piping and venting systemsQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds This is a remote position.

Job DescriptionBenefits: • 401(k), • Health insurance DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Scheduling, • Competitive Compensation You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Extensive work with commercial HVAC systems, including chillers, rooftop units, and mechanical systems, • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems, • Use common tools of the HVAC trade in daily work (e.g. multimeter, refrigerant gauges, charging charts, hand tools etc.), • Ability to install, service, and repair water source heat pump systems, • Establish customer rapport to ensure the highest levels of satisfaction, • Ability to layout, fabricate, assemble, install, and maintain refrigerant piping systems, pipe supports, and fixtures in commercial and industrial settings, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • 5-10 years experience as an HVAC service technician, • Valid Drivers License and clean driving record, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 50 pounds

Job DescriptionPosition Overview The HVAC Service Technician is responsible for servicing, troubleshooting, and maintaining commercial and industrial HVAC systems across a variety of facilities. This role focuses on delivering reliable service, preventative maintenance, and system optimization to ensure maximum performance and minimal downtime. The ideal candidate is a hands-on technician with strong experience in diagnostics, repairs, and system maintenance, and the ability to work independently while providing excellent customer service. Key Responsibilities • Diagnose, repair, and maintain commercial HVAC systems including rooftop units (RTUs), chillers, boilers, split systems, and air handling units., • Perform preventive maintenance services to ensure equipment operates efficiently and reliably., • Troubleshoot issues related to electrical systems, controls, compressors, motors, and refrigerant circuits., • Conduct system startups, testing, and commissioning of HVAC equipment., • Inspect equipment and identify opportunities to improve performance and energy efficiency., • Respond to service calls in a timely manner, including emergency service requests., • Read and interpret wiring diagrams, schematics, and technical manuals., • Maintain accurate service records, including work performed, parts used, and recommendations., • Communicate effectively with customers regarding system issues, repair options, and maintenance plans., • Ensure all work complies with local codes, safety standards, and company procedures., • Maintain a clean and organized service vehicle, tools, and jobsite.Qualifications, • 3+ years of experience as an HVAC Service Technician, preferably in commercial or industrial environments., • Strong knowledge of HVAC systems, refrigeration cycles, and mechanical equipment., • Experience troubleshooting electrical systems, controls, and HVAC components., • Ability to read and interpret schematics, wiring diagrams, and equipment manuals., • EPA Certification required (Universal preferred)., • Strong problem-solving and diagnostic skills., • Excellent communication and customer service skills., • Valid driver’s license with a clean driving record.Preferred Qualifications, • Experience working on chillers, boilers, cooling towers, and large commercial systems., • Familiarity with building automation systems (BAS) and controls., • Experience with preventive maintenance programs and service contracts., • OSHA certification or equivalent safety training.

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Union Local 638, • Non-union candidates will be enrolled in the union., • Competitive Compensation, • Career Advancement OpportunitiesWe are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial, industrial, and medical establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Manufacturers certification is a plus. Daikin, Mitsubishi, Liebert..., • A strong understanding of controls is a plus., • Strong electric troubleshooting is a plus., • Service and repair of heating, ventilating, and air conditioning (HVAC) systems to improve efficiency., • Diagnose the unit using the manufactures service tool., • Establish customer rapport to ensure the highest levels of satisfaction., • Repair or replace defective equipment, components, or wiring., • Perform leak test, replace compressors, correctly charge system. Qualifications: • Past experience as an HVAC service technician or comparable education, • Valid and clean Driver's License, • EPA Universal Certification, • Experience with operation and maintenance of VRV and VRF, • Ability to climb ladders, crawl, and lift 40 pounds

Job DescriptionAbout Our Company:Headquartered in Denver, Colorado, Cologix is a leading North America network-neutral interconnection and hyperscale edge data center company. Our platform gives customers access to 45+ digital edge and Scalelogix℠ hyperscale edge data centers in 13 markets across the United States and Canada along with a carrier-dense ecosystem of 710+ networks, 360+ cloud providers, 35+ onramps and seven Internet exchanges. We provide our nearly 2,000 customers with direct access to our local operations teams, resulting in strong partnerships enabled by exceptional operational support and unparalleled customer service. Backed by one of the largest North American infrastructure funds, Cologix's experienced leadership team, certified staff and commitment to ESG initiatives help form a culture that values our people, our environment and our clients. About the Position:The Data Center Technician, HVAC will play a critical role in performing skilled mechanical maintenance duties in the inspection, repair, installation and alteration of Data Center heating, ventilation, air conditioning and refrigeration systems and related equipment. They will perform preventive maintenance and routine servicing of equipment in the Parsippany facility. We are looking for an early career specialist who is looking to gain excellent experience in the Data Center Industry with an opportunity to grow with the company as we continue to expand. Shift available:Wednesday- Saturday 5 pm- 3 am Training will be 8 am- 5 pm for the first 90 days What you do daily: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes, • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, electrically operated air-conditioning equipment, and make necessary adjustments or repairs, • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, and safety valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory, • Maintain routine records and prepare reports, • Assist co-workers with other tasks as needed, • Responsible for assisting with the cleanliness of the entire facilityWhat makes you a good fit: (Qualifications), • 5+ years of experience in HVAC related work and/or educational equivalent, • Ability to perform skilled mechanical maintenance duties in the inspection, repair, installation and alteration of district heating, ventilation, air conditioning and refrigeration systems and related equipment and facilities, • Experience calibrating systems, • Knowledge of preventive maintenance and routine servicing of equipment., • Ability to write Method of Procedures (MOPs) for Preventative Maintenance, installation, and repair activities, • Capability to diagnose defects, and install, repair and maintain heating, ventilating, refrigeration, and air-conditioning units, • Adept at following oral and written instructions, • Ability to follow specified policies and procedures., • Ability to operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air conditioning and refrigeration systems, • Effective communicator both orally and in writing, • Collaborative team player, • Comfortable working independently and with little direction – resourceful, • Comfortable working in a fast-paced 24/7 environment with flexibility to work after-hours and weekends when needed and available for rotating on-call support, • Demonstrated experience meeting schedules and time lines, • Must be able to routinely lift objects weighing up to 50 pounds, • Autonomous with team spirit NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as assigned to meet the ongoing needs of the organization. Cologix is proud to be an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or veteran status. If you need assistance in applying for any of our open positions, please contact us at or call 720-940-2551. The California Consumer Privacy Act (“CCPA”) creates privacy rights relating to the collection, sale, disclosure, and deletion of consumers’ personal information. The CCPA requires businesses to provide consumers, including job applicants and employees, with information about their rights, including a description of the categories of personal information to be collected and the purpose for which the information will be used. For additional information regarding your rights, including a description of the categories of personal information to be collected and the purpose for which the information will be used, please see . Cologix’ data centers are ISO 27001:2022 and ISO 14001:2015 certified. These certifications demonstrate Cologix’s commitment to both information security and environmental stewardship. At Cologix, protecting information assets and minimizing environmental impacts are everyone’s responsibility. Cologix employees are responsible for:• Understanding and following Cologix’s information security, cybersecurity, privacy,and environmental management policies, procedures, and standards.• Ensuring conformance with the requirements of both the Information SecurityManagement System (ISMS) and the Environmental Management System (EMS).• Remaining vigilant and reporting any information security or environmental incidents,vulnerabilities, risks, or non-conformities to the appropriate teams.• Actively participating in Cologix’s efforts to maintain and improve information securityand environmental performance.

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA certification * MUST have a clean driving record. Estimated Salary: $60/hr - $70/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • Refrigeration Systems, • HVAC Service & Installation

Job DescriptionResidential HVAC Service Technician We invite full-time Residential HVAC Service Technicians to join our team in Union, NJ. Those with no HVAC experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. * Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. * Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. * Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. * Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. * Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-14 weeks. * Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. * You take pride in doing the job right, especially when nobody's checking. * You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. * You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. * You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know * Strong residential HVAC knowledge — you've been running service calls and diagnosing real problems in real homes. * Solid understanding of safety regulations and local codes. * Valid driver's license with a clean driving record. * Fluent in English. What Will You Do? You'll run residential HVAC service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: * Diagnosing and resolving HVAC issues across a range of equipment — furnaces, heat pumps, mini-splits, central A/C, boilers. * Spotting potential problems early to prevent callbacks and breakdowns. * Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. * Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Job Description Commercial HVAC Technician (Senior Level) Experience Required: 10+ Years Full-Time | Direct Hire Position Overview We are seeking an experienced Commercial HVAC Technician with 10+ years of hands-on experience servicing, troubleshooting, and repairing commercial HVAC systems. This individual will be responsible for diagnosing complex mechanical and electrical issues, performing preventive maintenance, and ensuring optimal system performance across commercial and industrial facilities. This is a senior-level role requiring strong technical expertise, independent decision-making, and the ability to mentor junior technicians when needed. Key Responsibilities • Diagnose, repair, and maintain commercial HVAC systems including RTUs, AHUs, chillers, boilers, VAV systems, VRF/VRV systems, split systems, and package units., • Perform advanced electrical and mechanical troubleshooting on HVAC controls and system components., • Service compressors, motors, pumps, valves, belts, bearings, and control systems., • Conduct refrigerant recovery, leak detection, charging, and system balancing., • Perform preventive maintenance on commercial HVAC equipment per contract specifications., • Interpret blueprints, wiring diagrams, and technical manuals., • Start up new installations and verify proper system operation., • Communicate clearly with facility managers and customers regarding system issues and repair recommendations., • Complete service documentation and work orders accurately and timely., • 10+ years of commercial HVAC service experience., • Strong experience with large-tonnage equipment and commercial mechanical rooms., • EPA Universal Certification required., • HVAC trade school or formal apprenticeship preferred., • Experience with building automation systems (BAS) a plus., • Strong understanding of electrical diagnostics and control circuits., • Ability to work independently with minimal supervision., • Ability to lift 50+ pounds., • Comfortable working on rooftops, ladders, and in mechanical rooms., • Competitive compensation based on experience, • Overtime opportunities, • Company vehicle and tools (if applicable), • Health, dental, and vision benefits, • Paid time off and holidays, • Long-term growth opportunities

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description General Summary We are seeking a skilled HVAC Technician to join our team to be responsible for the installation, maintenance, repair, and servicing of heating, ventilation, and air conditioning systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team. The HVAC Technician will ensure optimal performance and safety of HVAC systems in compliance with industry standards and regulations. Installs, maintains, services and repairs environmental control systems, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Duties and Responsibilities • Installation, service, troubleshooting and repairs including but not limited to; chillers, air handling units, controls, package units, split systems, exhaust fans, refrigerators, freezers, hot/chilled water pumps. Involvement in Site’s predictive maintenance program so previous experience is highly desirable., • Tasks ranging from operation of systems to the examination and evaluation of equipment to determine needed repairs, • Installs refrigeration and air conditioning systems by positioning compressors, motors, condensers, humidifiers, evaporators, heaters and other components in accordance with design specifications., • Charges refrigeration systems with refrigerant gas tests for leaks., • Starts unit and adjusts it for proper cut-in and cut-out of refrigeration units, humidifiers, heaters, air cleaners, and circulating pumps., • Adjust systems for optimal performance., • Maintains refrigeration and air conditioning systems by checking performance and determining problems. Repairs, adjusts, or replaces defective elements., • Installs, maintains and repairs the electrical and pneumatic systems associated with refrigeration and air conditioning equipment from the safety switch throughout the equipment., • Installs, maintains, repairs, operates all types centrifugal and reciprocating refrigeration/air-conditioning systems; also all types of pneumatic/electro-mechanical temperature controls., • Performs necessary plumbing procedures to ensure operation of systems and equipment, • Performs preventive maintenance., • Involvement in Site’s predictive maintenance program., • Performs other duties and shift coverage, as required. Knowledge, Experience and Skill Requirements • Must have EPA certification per CFR part 82f (Universal preferred) for servicing and recovery of refrigerants., • Ability to read blue prints, sketches, and specifications pertaining to air conditioning and refrigeration systems; to follow oral instructions; to use shop mathematics; to lay out work., • Minimum 4 years of experience performing the specific craft function or certification from a recognized trade school., • Requires broad trade knowledge of mechanical principals on standard shop methods of the Refrigeration and Air Conditioning Mechanic Trade., • Experience and/or certification in one or more predictive maintenance technologies (vibration analysis, infrared, ultrasound, etc.)., • High level of computer aptitude and knowledge of MS Office applications (Word, Excel, etc.)., • Ability to interpret and develop technical reports., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions. Disclaimer: CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $35.62. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job DescriptionBenefits: • Company car, • Flexible schedule, • Free uniforms, • Training & development Experienced HVAC Service Technician (Residential/Light Commercial) $35$55/hr + OT | Take-Home Van | Steady Work Gold Star Mechanical is hiring an experienced HVAC Service Tech. Were looking for someone who can diagnose and repair systems efficiently, communicate clearly with customers, and take ownership of the job. What Youll Do • Diagnose and repair residential and light commercial HVAC systems, • Perform maintenance and troubleshoot: electrical, airflow, refrigerant, controls, • Communicate findings and options clearly to office, • Keep clean notes and photos in work orders, • Maintain safe, professional work practices What Were Looking For • 3+ years HVAC field experience (service-focused), • Strong diagnostic ability (not just parts-changing), • Valid drivers license + clean driving record, • Professional, reliable, and customer-friendlyNice to Have, • Experience with mini-splits/VRF, rooftop units, boilers, controls, • Soldering/brazing experience, • Install experience a plusLocation / Service Area, • Based in: Nassau County, NY, • Typical service area: Long Island/Queens/Brooklyn

Job Description We are seeking a skilled Commercial HVAC Service Technician to join our Mamaroneck, NY- based client, specializing in the maintenance, troubleshooting, and repair of a wide range of commercial HVAC systems for clients based around Manhattan. This role requires strong technical expertise, attention to detail, and a commitment to delivering outstanding service to clients. What You’ll Do: • Perform preventative maintenance, troubleshooting, and repair on commercial HVAC systems including chillers, boilers, water source heat pumps, cooling towers, package rooftops, split systems, controls, pumps, and VAVs, • Read and interpret wiring diagrams and schematic drawings accurately, • Deliver excellent customer service while addressing client needs, • Apply problem‐solving skills to diagnose and resolve issues efficiently, • Maintain strong organization and attention to detail, • Work efficiently to maximize productivity and minimize downtime, • Carry and climb ladders up to 40 feet, • 5+ years of commercial HVAC Service Technician experience, • High School diploma or GED required; technical school education preferred, • EPA certification required, • Troubleshooting and service technician sst card, • Valid driver’s license, • Must pass drug test and background check, • OSHA certification a plus (not required), • Competitive pay: $45–$55/hr, • Full benefits: Medical, Dental, Vision, HSA, Life Insurance, 401(k) match, • PTO, Sick Time, Holidays

Job Description About the Client: Our client is an established food manufacturing company specializing in baked goods and specialty bread products. The organization operates in a fast-paced production environment, supplying products to retail and foodservice partners while maintaining a strong focus on quality, food safety, and operational efficiency. Role Overview: The HVAC Technician is responsible for the installation, maintenance, troubleshooting, and repair of HVAC and refrigeration systems in a manufacturing facility. This is a hands-on, plant-based role focused on maintaining equipment uptime, supporting production operations, and ensuring systems operate efficiently and safely. The ideal candidate has strong experience working with industrial HVAC systems, refrigeration units, and facility equipment, and is comfortable performing preventive and corrective maintenance in a fast-paced setting. Job Requirements: • 3 years of experience in HVAC, refrigeration, mechanical, or related technical roles., • Experience working with industrial HVAC systems, refrigeration units, and freezers., • Strong ability to troubleshoot, diagnose, and repair mechanical and electrical systems., • Knowledge of preventive and corrective maintenance practices in manufacturing or industrial environments., • Familiarity with building systems, chilled water, hot water, and steam systems., • Basic understanding of automation systems or building management systems (BMS)., • Experience working with hydraulic and pneumatic systems is a plus., • High school diploma or equivalent required; technical certification preferred., • Ability to use Microsoft Office and/or CMMS systems for maintenance tracking., • Strong hands-on mechanical aptitude and problem-solving skills., • Detail-oriented and safety-focused mindset., • Ability to work independently and within a maintenance team., • Reliable, proactive, and responsive to urgent equipment issues., • Standing, walking, bending, and performing physical tasks throughout the shift., • Lifting and handling materials up to 50 lbs, including tools and equipment., • Comfortable working in manufacturing environments with exposure to heat, cold, and noise., • Maintain HVAC Systems: Install, repair, and maintain heating, ventilation, air conditioning, and refrigeration systems across the facility., • Perform Troubleshooting: Diagnose and repair issues in HVAC, refrigeration, and mechanical systems to minimize downtime., • Support Production Operations: Ensure all equipment is functioning properly to support continuous manufacturing operations., • Monitor Systems: Track the performance of building systems and automation controls, and respond to alarms and system issues., • Repair Mechanical Systems: Maintain and repair chilled-water, hot-water, and steam systems that support facility operations., • Execute Work Orders: Complete maintenance tasks in order of priority and in line with production needs., • Maintain Equipment: Perform preventive maintenance on HVAC and related systems to improve reliability., • Ensure Compliance: Follow all safety policies, GMP standards, and food safety regulations., • Support Inventory Needs: Communicate required parts, tools, and materials to supervisors., • Assist Maintenance Team: Collaborate with the maintenance team on equipment and continuous improvement initiatives. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

Excellent 1st shift opportunity! This Jobot Job is hosted by: Craig Rosecrans Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $36 per hour A bit about us: We are seeking a skilled Maintenance Technician with a background in Paper Mill Machinery to join our dynamic team in the Manufacturing industry. As a Maintenance Technician, you will be an integral part of our operations, ensuring that our machinery is maintained and serviced to the highest standards. You will work closely with our production team to minimize downtime and maximize productivity. This is a permanent, full-time position and requires a minimum of 5 years of relevant experience. Why join us? • Competitive Base Salary, • Company paid health plan for employees, • Very generous PTO, • Small team, autonomy, • Many more great perks! Job Details Responsibilities: • Carry out routine and preventative maintenance on paper mill machinery to ensure optimal performance and longevity., • Troubleshoot and repair mechanical issues with machinery, including hydraulic systems and PLC controls., • Operate various types of machinery and equipment in the course of your duties., • Use your welding skills to carry out necessary repairs and fabrications., • Maintain HVAC systems to ensure a comfortable and safe working environment., • Keep accurate and up-to-date records of all maintenance and repair work carried out., • Work closely with the production team to identify potential issues before they become problems, and to minimize downtime., • A minimum of 5 years of experience in a similar role, preferably within the manufacturing industry., • Proven experience with paper mill machinery maintenance., • Demonstrable skills in welding, HVAC maintenance, and PLC controls., • Knowledge of hydraulic systems and their application in paper mill machinery., • Ability to operate various types of machinery safely and effectively., • Strong problem-solving skills and the ability to troubleshoot mechanical issues., • Excellent attention to detail and a commitment to maintaining high standards of work., • Good communication skills and the ability to work well as part of a team., • A strong understanding of health and safety regulations within the manufacturing industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

A leading independent mission-critical controls provider This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $40 - $50 per hour A bit about us: A leading independent mission-critical controls provider Why join us? • Health, Dental, Vision, • 401K, • Short term and long-term disability and FSA, • PTO / Sick Time, • Paid holidays, • Paid time off (PTO) Job Details Building Automation Service Technician Location: Northern Virginia Pay: $40–$50/hr About the Role: We are seeking a skilled and motivated Building Automation Service Technician to support service, maintenance, troubleshooting, and commissioning of building automation systems across commercial and mission-critical facilities in Northern Virginia. This role will primarily focus on Delta Controls BAS platforms while interacting with HVAC, low-voltage, and integrated building systems in the field. What You’ll Do • Perform service, repair, and troubleshooting on building automation systems with an emphasis on Delta Controls hardware and software., • Diagnose and resolve issues with controllers, I/O, sensors, networks, and field devices., • Support startup, testing, and commissioning activities for BAS systems., • Respond to service calls, perform preventative maintenance, and ensure systems are operating efficiently and reliably., • Work with customers onsite to understand issues, explain findings, and recommend solutions., • Assist with configuration, programming adjustments, and system optimization as needed., • Maintain accurate service reports, documentation, and parts inventories., • Collaborate with project managers, engineers, and fellow technicians to deliver quality service., • Hands-on experience with Delta Controls BAS, including troubleshooting, commissioning, and service., • Comfortable working in the field across commercial, industrial, and mission-critical environments., • Strong understanding of HVAC controls, low-voltage wiring, sensors, and field devices., • Ability to interpret wiring diagrams, sequences of operation, and BAS schematics., • Self-starter attitude with excellent problem-solving skills., • Good communication and customer service skills., • Experience with additional BAS platforms (Niagara, Siemens, Schneider, Reliable Controls), • Familiarity with network protocols such as BACnet/IP, MSTP, • Experience with field toolsets (multi-meters, commissioning tools) Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

engineering, programming, installation, energy services, and cloud / remote solutions This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $50 per hour A bit about us: building automation and controls company Why join us? • Competitive pay: $35–$50/hour (based on experience), • 100% paid employee medical coverage + 50% for dependents, • 401(k) with 4% company match, • 7 paid holidays + 2 weeks of vacation starting day one, • Company vehicle, gas card, phone, and laptop provided Job Details An established Building Automation and Integration firm in the DFW area is looking for an experienced Controls Service Technician to join our growing service team. This position is ideal for someone who enjoys troubleshooting complex systems, programming controllers, and ensuring our clients’ facilities run smoothly and efficiently. What You’ll Do • Perform service, diagnostics, and repair of Building Automation and HVAC control systems, • Troubleshoot DDC panels, communication networks, and control sequences, • Modify or create control programs using Tridium Niagara, ABB, Distech, Honeywell, and Johnson FX platforms, • Collaborate with project managers and engineers to support ongoing construction and retrofit projects, • Handle emergency service calls and preventive maintenance with professionalism and technical precision What We’re Looking For • Minimum 2 years of experience servicing or programming DDC/BAS systems, • Proficiency in ladder-logic or similar programming environments, • Experience with any of the following platforms: ABB (Cylon), Distech, Honeywell, or Johnson Controls, • Tridium Niagara (AX/N4) certification preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Growing company adding to our team for Technicians and Installers from the HVAC industry! This Jobot Job is hosted by: Brandon Fobert Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $45 - $55 per hour A bit about us: A growing, family -focused business with great growth potential! Why join us? We provide competitive wages and benefits to individuals that have the desire to work hard and succeed. We provide 401k plus company match, health insurance, paid vacations, paid holidays, commission opportunities and more. Job Details Job Details: We are seeking a competent and experienced HVAC Technician to join our growing team in the construction industry. As a HVAC Technician, you will play a crucial role in installing, maintaining, and repairing our clients' heating, ventilation, and air conditioning systems. You will be responsible for ensuring that our HVAC systems are functioning at optimal levels, providing comfort and efficiency for our clients. This is a full-time, permanent position that offers competitive compensation, benefits, and the opportunity to work in a dynamic, fast-paced environment. Responsibilities: 1. Install, service, and repair heating and air conditioning systems in residential and commercial settings., 2. Troubleshoot and repair HVAC/R equipment, wiring, and controls., 3. Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs., 4. Service and repair evaporative coolers, roof-top package units, split systems, boilers, commercial refrigeration, chillers, and other HVAC equipment., 5. Work closely with the project management team to ensure projects are completed on time and on budget., 6. Maintain accurate documentation of all installation, service, and repair work completed each day., 7. Schedule and complete routine preventative maintenance., 8. Maintain a clean and organized work area, and ensure all tools are in good working condition., 9. Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area., 10. Provide excellent customer service to clients, ensuring their comfort and satisfaction. Qualifications: 1. At least 5 years of experience as an HVAC Technician., 2. EPA Certification is mandatory., 3. Comprehensive knowledge of the principles, methods, and techniques used in the installation, maintenance, and repair of HVAC systems., 4. Proficient in troubleshooting HVAC/R equipment, wiring, and controls., 5. Ability to repair and maintain HVAC equipment, including air conditioners, furnaces, and other related equipment., 6. Excellent oral and written communication skills., 7. Strong customer service and problem-solving skills., 8. Ability to work independently and manage time effectively., 9. Must be able to handle a physical workload, including lifting heavy equipment and working in confined spaces., 10. Must have a valid driver's license and reliable transportation. If you are a skilled HVAC Technician looking for a challenging and rewarding career in the construction industry, we would love to hear from you. Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description We are looking for an HVAC Controls Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new High End Residential BMS systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • OSHA site safety or supervisor, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job Description An HVAC Technician is responsible for installing, maintaining, and repairing heating, ventilation, air conditioning, and refrigeration systems. This role includes tasks ranging from changing thermostats to the full installation of new HVAC units or boilers. Technicians ensure systems operate efficiently and meet safety standards, contributing to comfort and air quality in residential and commercial settings. Responsibilities • Install, maintain, and repair HVAC units and boilers, • Replace and configure thermostats and controls, • Diagnose and troubleshoot system malfunctions, • Perform routine inspections and preventive maintenance, • Ensure compliance with safety and building codes, • Provide customer service and explain system operation, • Maintain accurate service records and reports Preferred Qualifications • Experience with tasks from thermostat replacement to full HVAC and boiler installation

Job Description Innovative Air Residential HVAC Service & Maintenance Technician Location: White Plains, NY Real Home-Service Pros Wanted Innovative Air is Westchester's trusted residential team for heating, cooling, plumbing, insulation, and IAQ, known for reliability, honesty, and uncompromising quality. As a Residential HVAC Service & Maintenance Technician, you'll run residential service/maintenance calls, diagnose, repair, educate the homeowner, and keep systems running safely and efficiently. Key Responsibilities for Residential HVAC Service & Maintenance Technician • Diagnose and repair residential HVAC systems (heat, AC, controls), • Perform preventive maintenance and system inspections, • Provide clear options and recommendations to homeowners, • Document work and updates in ServiceTitan (preferred; training provided), • Maintain clean, safe work practices and a professional customer experience Qualifications for Residential HVAC Service & Maintenance Technician • 3 or more years of residential HVAC service/maintenance experience (or a mix of residential + light commercial with strong residential troubleshooting skills), • Valid driver's license and an acceptable driving record (per company policy/insurer requirements)., • Employment is contingent on passing a background check consistent with applicable law., • Strong communication and "white glove" mindset in occupied homes, • Comfort with tablets/software (preferred) Pay & benefits • Full-time - W-2 employee, • Pay: $35 to $50 per hour (5 or more years + advanced certs/diagnostic strength). Final offer based on experience and certifications., • Bonus/commission/spiff opportunities (role-dependent), • Health insurance, PTO, retirement options, • Company vehicle/truck, tools, fuel support (role-dependent) Why Innovative Air We're local, family-owned, and still run like a real team, not layers of corporate management. The expectations are high (quality + communication), but the support is real, and your work is respected. If you want steady year-round residential work in Westchester with leadership that's accessible, you'll feel at home here. Innovative Air is an equal opportunity employer. We welcome applicants of all backgrounds and are committed to creating an inclusive workplace.

Job Description 100% REGIONAL/NATIONAL TRAVEL (MON-FRI) Company Vehicle/Tools Provided, Company Credit Card for Travel Expenses, Paid Travel/ Training, Achieve Professional Certifications (NEBB), Cell Phone/ Daily Food Allowance, Training/ Retention Bonuses, Weekends off, Hotel & Airfare Points are Yours to Keep! The HVAC Field Service Technician role has a competitive salary based on experience. Wellness Benefits: Medical, Dental, Vision, HSA, EAP, FSA, FSA Dependent Care, and Wellness program. Life, short-term, and long-term disability company-sponsored plans. Financial Benefits: Competitive pay, retention bonuses, employee-owned, 401K plan with match, paid time off, paid holidays, bereavement, paternal leave, jury duty, and tuition reimbursement. We are looking for a full-time HVAC Field Service Technician professional to join our Services team. As a small-medium sized business in the emerging energy efficiency space, we partner with some of the largest retailers, restaurants, and grocers in the world to ensure high quality and energy-efficient buildings! Our national network of engineers and technicians is unique in this field and provides a solid platform for future growth. The ideal candidate will be able to demonstrate exceptional communication and integrity while maintaining a high level of service excellence. Essential Duties and Responsibilities: • Perform system commissioning for commercial buildings including Air/Water Balance, Indoor Air Quality (IAQ) testing, Equipment start-up, and Quality Assurance (QA) testing., • Write technical reports at project completion for submission to customer., • Provide technical support to Customers and Contractors to resolve issues rapidly and thoroughly., • Make recommendations for potential service enhancements or modifications to meet the ever-changing needs of the customer base., • Provide technical support to customers and contractors., • 100%+ travel required (regional or national)., • 1+ year of HVAC experience required, • Proficient in MS Office (Excel, Word, PowerPoint and Visio), • Mechanical experience preferred, • NEBB, AABC, TABB & NBC certified is a plus, • Mechanical, electrical, and controls knowledge preferred, • Superior Customer Service Skills, • Excellent written and verbal communication skills, • High emotional intelligence, positive attitude, and a service leadership philosophy, • High attention to detail, follow-up, multi-tasking, and conflict resolution, • Able to demonstrate a high level of integrity and a penchant for high quality, • Must possess a strong work ethic and a high level of self-accountability, • Able to establish and maintain effective working relationships with co-workers, contractors, and customers, • OSHA 30 Hour training preferred, • Bilingual (Spanish speaking) would be beneficial The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist., • Must be able to climb a minimum 30 foot ladder, • Maximum unassisted lift = 50 lbs. Average lift less than 20 lbs., • Exposed to seasonal weather based on geographic region, • Exposed to moving parts and electricity that require safety protocols, • Exposure to varied travel conditions either driving or flying Perks: • Travel The Country - 100% Travel, • Paid Training: Classroom, Online, & Field, • Become an Employee Owner, • Company Provided: Vehicle, Tools, Laptop/Tablet, • Hotel & Airfare Loyalty Points Are Yours to Keep, • Gain Experience with All Equipment Types & Nearly All OEMs, • Paid Travel & Overtime, • Company Credit Card for Travel Expenses, • Achieve Professional Certifications, • Clothing Stipend & Cell Phone Allowance Training & Retention Bonuses, • Weekends Home, • Independent Work Life, • Learn A High Demand Skill Set, • Practical Hands-On Experience SwHRXXaCw2 Company DescriptionWe are a global provider of energy efficiency and renewable energy solutions for commercial buildings with four offerings: Intelli-Hood Kitchen Ventilation Controls, HVAC Test & Balance, Solar PV Development, and Geothermal HVAC. For 30+ years, we’ve been helping companies save energy, increase profits and make the world a more sustainable place. Our corporate headquarters is LEED Platinum and Net-Zero Energy, and our vehicle fleet consists of all hybrid and electric cars.We are a global provider of energy efficiency and renewable energy solutions for commercial buildings with four offerings: Intelli-Hood Kitchen Ventilation Controls, HVAC Test & Balance, Solar PV Development, and Geothermal HVAC. For 30+ years, we’ve been helping companies save energy, increase profits and make the world a more sustainable place. Our corporate headquarters is LEED Platinum and Net-Zero Energy, and our vehicle fleet consists of all hybrid and electric cars.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Swing Shift 3:00pm-11:30pm, Tuesday - Saturday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

HVAC Environmental Controls Technician.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Training & development BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: Absorption chiller and Electrical chiller Air Purification, Filtration and Ventilation systems Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. Troubleshoot and repair control system installations independently, ensuring performance standards are met. Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. Monitor customer buildings to ensure optimum performance standards are being achieved. Be proficient in knowledge of cooling and heating systems. Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. Familiarity with mechanical and electrical systems as part of construction and building automation system. Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. Strong organizational, communication, and problem-solving skills. Ability to manage customer relations and work effectively in a team to meet project deadlines. Performing other duties as assigned by Project Manager Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: Competitive salary is based on experience 401(k) plan with company match Comprehensive health insurance (Medical, Dental, Vision, Life) Paid Time Off and company holidays BROAD is an equal opportunity employer

Job DescriptionSalary: 40-45/hour DOE ELECTRONIC ENVIRONMENTShas been an A/V industry pioneer and leader for over 35 years. We enjoy making technology fun and convenient for our clients. Electronic Environments offers a fast paced, fun environment where we deliver projects for customized home automation solutions including distributed entertainment systems, lighting controls, motorized shading, HVAC systems, access controls and IT infrastructure. We are currently looking for an experienced Lead Technician in our NYCoffice. Our ideal candidate should possess 5+ years of AV installation and integration experience. Responsibilities for this position include: • Teach, mentor, and guide field technicians and junior technicians to successfully install and commission AV home integration systems., • Act as the subject matter expert and lead installations for AV control systems including but not limited to:, • Wire ring out., • Wire management, trimming, proper wire labeling standards, and termination including: RG6, Fiber, Cat6, Cat6A RJ-45 Compression, Solder, etc., • Lighting Keypads and touch panel installations., • Programing of URC remotes., • TV brackets and other mechanical display support devices., • Physical installation of control system components: racks, TVs, speakers, video walls, projectors, and other equipment., • Document status reports, procedures, and updates to the project within project software. Provide daily updates to project team in applicable platform., • Verify task list from daily punch list at the project site, follow in accordance with project timeline and expectations., • Work alongside other project team members to setup and test AV signal flows, equipment functionality, and programming., • Communicate with project manager and project stakeholders providing any changes required due to construction restraints or other issues that arise., • Professionally interact with external stakeholders including but not limited to general contractors, architects, client staff, and clients. Connect with the project manager on any requests from external stakeholders., • Perform diagnostics, troubleshooting, and testing of systems during installation phases. Report, document, and resolve issues as applicable., • Load programming and train clients in system use with completion of a project., • On-call weekend rotation is required. Job Qualifications • High school diploma or equivalent preferred., • Expert knowledge of:, • Audio & Video distribution concepts and equipment (HDMI, Dante audio), • IR, RS-232, and Network control protocols & communication., • Networking standards including, but not limited to, VPN connections & port forwarding concepts., • Savant, Creston and/or Control4 control systems., • Lutron lighting & shade systems., • HVAC and thermostat functionality., • Comfortable interacting with VIP clientele in a fast-paced environment., • Understanding of product lines including Crestron, Savant, Sonos, Lutron, Snapav, Access Networks, Sonance, Bluebolt, Future Automation, and Seura., • Working knowledge of Crestron Toolbox, Savant, Dyn, DNS, etc., • Ability to lift, move, and push 50 lbs., • Required to stand, walk, climb, sit, and use hands and fingers., • OSHA 40 and applicable SST certification required. (or able to obtain with 6 months of employment), • Valid drivers license preferred. Our company benefits include: * Competitive salary based on experience * Insurance benefits (Medical, Dental, Vision, FSA, Life, AD&D, LTD) * 401(k) retirement plan * Generous PTO policy * Access to employee purchase opportunities * Casual work environment & strong commitment to work/life balance * Continuous training opportunities as well as attendance to industry conferences. C2

Job DescriptionPosition Description: We are looking for an experienced Lead HVAC Technician to serve as our team's primary technical expert. In this role, you will handle advanced diagnostics and Service while providing guidance to junior technicians. This is a leadership-focused position ideal for a high-level field professional ready to move into a supervisory or senior-tier role. Key Responsibilities Technical Leadership: Diagnose, troubleshoot, and repair complex light commercial, Commercial and VRF HVAC systems, including hydronic, Water Cooled, and VRF systems. Team Mentorship: Supervise and train junior technicians and helpers on-site, ensuring work meets high standards of professionalism and safety. Customer Experience: Communicate clearly with clients, explaining technical issues and providing repair vs. replacement options. Operational Excellence: Maintain an organized company truck, manage inventory for critical spare parts, and ensure compliance with OSHA and EPA regulations. Required Qualifications Experience: Minimum 5+ years of hands-on HVAC service technician. Leadership: At least 2 years of experience in a crew lead or supervisory capacity. Certifications: Valid EPA Universal Certification (required) and state-level HVAC license. Knowledge: Advanced understanding of electrical, gas, refrigeration systems, and local building codes. Driving: Valid drivers license with a clean driving record. Preferred Qualifications Experience with Building Automation Systems (BAS) or smart home controls. NATE Certification or specialized boiler/hydronics training. Compensation & Benefits Pay: $35.00 $45.00 per hour (based on experience), plus performance-based bonuses. Tools & Equipment: Company-provided take-home truck, fuel card, high-end tools, and uniforms. 638 Union Package: Comprehensive health, dental, and vision insurance. Time Off: Paid vacation, sick leave, and holidays. $35.00 - $45.00 Hourly

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Day Shift 7:00am-3:00pm, Monday - Friday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionReady to Lead the Way? If you're a natural leader who takes pride in delivering reliable service and inspiring your team to perform at their best, and have experience in the HVAC industry, we'd love to hear from you.Apply today to join the REIC Rentals team in South Plainfield, New Jersey a Service Manager! About the Role We're looking for a motivated and HVAC experienced Service Manager at our South Plainfield, NJ location to lead our field and shop service operations. Reporting to the Operations Manager, this position oversees technician assignments, shop readiness, equipment maintenance, and customer service excellence. The ideal candidate is a hands-on leader who thrives in a fast-paced, customer-focused environment and knows how to balance operational efficiency with team development and technical quality. About Us REIC Rentals operates as a trusted leader in specialty rental solutions across North America. With 55+ locations across North America, we provide high-performance equipment and expert support to meet the most demanding challenges. Looking ahead, we are committed to expanding our reach, enhancing our technology, and continuously innovating to deliver even more efficient, sustainable, and customized solutions. Our goal is to set new industry standards, ensuring our customers always have the best tools, expertise, and service-wherever and whenever they need it. Why Join REIC Rentals? • Competitive Salary + bonus, • Health, Vision, and Dental Benefits available for full-time employees & family members, 401K with match, paid life insurance and generous paid time off and company paid holidays., • Growth-Focused Culture: We empower employees to take initiative and shape the future., • Meaningful Impact: Your work directly contributes to our mission of innovation and excellence., • Collaborative Team: Join a group of passionate professionals who support and challenge each other to do their best work., • Career Development: We invest in your success through ongoing training, mentorship, and advancement opportunities. What You'll Do • Lead, schedule, and coordinate daily service technician assignments to ensure efficient and timely deployment., • Prepare and submit safety incident reports (including near-misses) within 24 hours and track corrective actions to closure., • Lead monthly safety meetings/toolbox talks with technicians, documenting attendance, topics, and follow-ups., • Manage the truck fleet and ensure monthly safety meetings and DOT inspections completed correctly., • Serve as the first line of technical support for troubleshooting and equipment issues., • Maintain a safe, organized, and fully functional shop environment., • Ensure technicians are properly trained and follow all safety and quality procedures., • Oversee fleet maintenance, service documentation, and work order completion using company systems., • Manage work assignments to achieve operational goals, including on-time service and equipment readiness., • Collaborate with the Technical Services Director to identify and resolve field equipment issues., • Coach and mentor technicians to build technical skill, teamwork, and customer service excellence., • Review, approve, and close service orders and purchase requisitions within authority limits., • Promote adherence to company policies, cost controls, and performance metrics to support profitability., • Ensure all deployed equipment meets operational standards ("green tagged") and is ready for service., • Drive process improvement initiatives to enhance efficiency, safety, and service delivery., • Represent the company with professionalism and provide exceptional customer experiences., • Support cross-functional teams and travel as needed (domestic and international). Who You Are • An experienced manager with professional experience in the equipment rental industry and/or commercial HVAC industry, • A hands-on leader who enjoys solving problems and supporting a high-performing service team., • Organized and proactive, with the ability to juggle multiple priorities in a fast-paced environment., • Detail-oriented but adaptable - able to balance quality, deadlines, and customer satisfaction., • Strong communicator with excellent interpersonal, written, and verbal skills. Qualifications • Associate degree or technical certification preferred (or equivalent experience)., • 5+ years of technical or field service experience, including leadership or supervisory roles in HVAC and/or equipment rental industry, • Strong mechanical aptitude and understanding of equipment maintenance and repair., • Experienced running monthly safety meetings and DOT inspections, • Proficient with Microsoft Office Suite and business systems (inventory, work order, or ERP tools)., • Proven track record of coaching teams, driving results, and delivering excellent customer service., • Valid driver's license (passport required for international travel)., • Ability to lift up to 35 lbs and work in shop/field environments as needed. #stepintosuccess REIC does NOT accept solicitation from outside recruiters or recruiting agencies. REIC and all affiliates operate as drug-free environments, which includes marijuana. A pre-employment drug screening that tests for THC and other drugs, as well as a full background check, is required of all newly hired employees. Job Posted by ApplicantPro

We are seeking a skilled and dependable Building Maintenance Technician with a strong background in HVAC and Controls systems to join our facilities team.

Urgently Hiring for Hvac Controls Technician Roles in New Hyde Park, NY.

Job Description Title Cultivation Technician Location Southern Ca, Pacific North West, Mid Atlantic Department Commercial Field Operations Reports To Director of Cultivation Science Job Type Full-Time | Exempt / Salaried ABOUT HYDROBUILDER HOLDINGS Hydrobuilder Holdings partners with cultivators across the Controlled Environment Agriculture (CEA) spectrum — from large commercial facilities to independent and emerging growers. Our mission is to help growers improve yield, reduce operating costs and increase profitability by combining curated products, logistics, advisory expertise and integrated technology into one aligned ecosystem. Elevated, our commercial division, is a tech-enabled service platform for CEA operations. Through dedicated Account Executives, Cultivation Advisors, proprietary brands and AI-driven crop optimization tools, Elevated supports professional growers from facility build-out through harvest optimization. Hydrobuilder.com, “The Growers Marketplace,” serves smaller and mid-sized growers with a robust digital platform offering curated products, education and an expanding B2B portal experience. At the core of our innovation is our integrated AgTech program, applying AI, sensor data and lab analytics to deliver actionable insights that improve consistency, efficiency and margins across the cultivation lifecycle. OVERVIEW OF POSITION The Elevated Cultivation Technician is a field-based execution specialist responsible for structured facility data collection, system documentation, AgTech monitoring support, and sampling integrity within licensed commercial cultivation facilities. This role serves as the execution backbone of Elevated's AgTech Field Service Program — collecting defensible, repeatable data that enables Cultivation Advisors to deliver strategic recommendations. The Cultivation Technician operates with precision and discipline, adhering to a clear mandate: execute consistently, document precisely, and escalate responsibly. All advisory decisions are escalated to the assigned Cultivation Advisor or Cultivation Strategist. KEY RESPONSIBILITIES Facility Assessment & Structured Data Collection • Execute standardized facility assessments using approved workflows, • Collect and document environmental metrics including temperature, humidity, VPD-related readings, airflow indicators, and PAR/PPFD measurements, • Document objective room-level variability with strict observational neutrality (no interpretation), • Upload complete field data to support Advisor reportingEquipment Mapping & Infrastructure Documentation, • Document and maintain accurate records of lighting systems, HVAC and dehumidification capacity, RO and filtration systems, fertigation and irrigation infrastructure, and environmental monitoring and sensor placement, • Technicians document what exists — Advisors determine optimization strategyAgTech Monitoring & System Support, • Verify proper operation of sensor systems and confirm data connectivity and integrity, • Identify, flag, and log anomalies, service notes, and system observations, • Perform basic functionality checks (system strategy decisions escalated to Advisors)Sampling & Chain of Custody Execution, • Collect tissue, water, substrate, runoff, and pathogen samples following strict chain-of-custody procedures, • Ensure consistent sampling location, timing, labeling, and sanitation practices, • Maintain biosecurity compliance and submit samples per approved cadence, • Technicians do not interpret lab results or communicate conclusions independentlyRecurring Program Execution, • Execute assigned sampling tracks at weekly, bi-weekly, and monthly cadence as required, • Support baseline data collection during client onboarding, • Ensure continuity of historical data to maintain service repeatability across core package tiersProduct Trial, Implementation & Preferred Solutions Integration, • Design and manage structured product and technology trials aligned with the AgTech Program, • Execute trial milestones, capture validation data, and support cross-functional implementation, • Manage platform integration (Elevated One) and support conversion from trial to standardized solutionProcedural Compliance Verification, • Verify adherence to documented mixing and irrigation procedures, • Document observed deviations and escalate inconsistencies or system irregularities, • Support mechanical troubleshooting when directed (strategic nutrients, irrigation, and environmental decisions are escalated)Escalation & Risk Identification, • Immediately escalate suspected pathogen pressure, severe crop stress or pest pressure indicators, biosecurity risk, abnormal data readings, system failures, and safety risks, • When uncertain — pause and escalateCross-Functional Coordination, • Update CRM and internal systems to ensure continuity across all touchpoints KEY PERFORMANCE INDICATORS (KPIS) • On-time field report submission ≥ 95%, • Sampling accuracy & chain-of-custody compliance: 100%, • Escalation within SLA ≥ 95%, • Data completeness rate ≥ 98%, • Package cadence adherence ≥ 98%, • Safety incident rate: 0 preventable incidents, • Advisor data turnaround support: ≤ 48 hours from facility visitKEY CHALLENGES, • Maintaining strict observational neutrality while working in complex, high-pressure cultivation environments that may prompt on-the-spot interpretation, • Managing a geographically distributed service territory with consistent cadence, biosecurity compliance, and data quality across diverse client facilities, • Navigating ambiguous or escalation-worthy situations with sound judgment while staying within defined role scope, • Executing structured product trials with rigor and documentation standards sufficient for data-driven advisory conclusionsJOB KNOWLEDGE, SKILLS & EXPERIENCE, • 2+ years in technical field service, cultivation support, or AgTech operations preferred, • Strong mechanical aptitude; familiarity with environmental controls and irrigation systems preferred, • Experience with digital reporting platforms and CRM systems, • Customer-facing field professionalism and the ability to operate with minimal supervision, • Valid driver's license and flexibility for regular travel, • Ability to lift up to 50 lbs; comfortable standing, climbing, and working in humid, high-light, active production environments, • Flexible schedule aligned with assigned service routes and client cadenceCOMPENSATION, • Base Salary: Starting at $65,000 annually, commensurate with experience, • Performance-based incentives, • Company vehicle provided, • Gas reimbursement, • Cell phone stipendBENEFITS, • Comprehensive health, dental, and vision insurance, • 401(k) plan with company match, • Paid time off and holidays, • Professional development and training opportunities, • Flexible work schedule and remote work options In addition to the responsibilities listed above, the employee may be asked to perform other duties as assigned by management.

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA Type 1 & 2 of universal certification * Must have your own hand tools. * MUST have a clean driving record. * OSHA 10-hour training certification (preferred). Estimated Salary: $55/hr - $65/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • HVAC/R Systems, • Journeyman’s License, • OSHA 10-Hour Certification (OSHA 10), • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair

Job DescriptionProvides administrative and secretarial support for the vice president and department. RESPONSIBILITIES • Monitors and oversees facility operations for a large biotech site., • Troubleshoots and performs repairs on system issues involving electronic, electrical, pneumatic, hydraulic, and mechanical devices, Johnson Controls Metasys BMS, utility, and water systems., • Supervisor in charge of facility housekeeping staff for second shift., • Generates work orders in SAP, participates in site emergency response and Hazmat activities. Novartis Pharmaceuticals 01 Sep 2005 - 01 May 2014 ENGINEERING TECHNICIAN 1216 5th Avenue New York NY , 10029 OK to contact this employer? - No RESPONSIBILITIES • Repaired, maintained, and calibrated pharmaceutical manufacturing, production and packaging equipment.