Trabajos industrial engineering en New Brunswick, New JerseyCrear alertas

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job Description Senior Electrical Estimator We are seeking an experienced Senior Electrical Estimator to join our team. This position is ideal for a detail-oriented professional with a strong background in estimating high-rise, multi-unit residential, and commercial electrical projects. The Senior Electrical Estimator will be responsible for preparing accurate and competitive bids, reviewing project documents, identifying cost-saving opportunities, and working closely with our project management team to support projects from the bidding stage through award. Primary Duties and Responsibilities • Prepare detailed and accurate cost estimates for electrical projects, including labor, materials, equipment, and other project-related costs., • Review and interpret drawings, specifications, bid documents, and project requirements to determine the complete scope of work., • Utilize Accubid and live count/takeoff software to prepare comprehensive and competitive estimates., • Perform detailed quantity takeoffs and ensure all components of the electrical scope are properly captured., • Solicit, review, and analyze subcontractor and supplier quotations to ensure competitive pricing and complete scope coverage., • Identify potential cost-saving opportunities and provide value-engineering recommendations., • Attend pre-bid meetings, site visits, scope reviews, and client meetings as required., • Collaborate with project managers, engineers, vendors, subcontractors, and clients to obtain necessary information and clarify project requirements., • Review estimates for accuracy, completeness, and compliance with project specifications prior to bid submission., • Maintain organized historical cost data, vendor pricing, labor information, and current market pricing trends., • Assist with bid leveling, scope comparisons, and turnover of awarded projects to the project management team. Requirements • Minimum of 5 years of experience as an Electrical Estimator, with demonstrated experience estimating high-rise, multi-unit residential, and commercial electrical projects., • Strong proficiency in Accubid and live count/takeoff software is required., • Thorough understanding of electrical systems, materials, installation methods, and industry standards., • Strong knowledge of electrical drawings, specifications, and construction documents., • Excellent analytical, mathematical, and problem-solving skills., • Strong attention to detail and ability to produce accurate estimates., • Excellent organizational and time-management skills., • Ability to manage multiple bids and priorities while working under tight deadlines., • Ability to work independently as well as collaboratively with project teams., • Strong written and verbal communication skills for interaction with clients, vendors, subcontractors, and internal teams. Job Type: Full-time Work Location: In person \nCompany Description We provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities. We provide quality electrical installation on large scale projects that range from new construction, high rise, commercial and retail complexes to large industrial facilities.

Job Description Title: Driver Location: Somerset, NJ Type: Full-time Shift: Monday-Friday, Days - 4am-5am start Pay: $26/hour This is a Union Position Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! What We Offer As a union Driver, you’ll benefit from a comprehensive, employee-first benefits package designed to support your health, financial security, and long-term growth. Our union-backed benefits go beyond the basics -providing stability, strong protections, and meaningful perks that reward your hard work and commitment. • Union-provided medical, dental, and vision insurance with no employee deductions (only standard copayments), • Weekly pay, • 10 paid holidays plus 4 floating holidays, • Vacation and sick time, • Union annual wage increases, • Annuity (retirement savings plan), • FICA reimbursement after 2 years of employment, • Shift differential, • Health Reimbursement Account (HRA), • Company-issued boot allowance, • Company-provided PPE and apparel, • Continual education opportunities, • Longevity awards with pay increases, • Maternity and bereavement About the Role The Driver will be responsible for driving a company vehicle throughout the assigned geographic area and ensure safety of self and others while driving. What You'll Do: • Load and unload cargo, • Execute local deliveries and obtain authorization signatures., • Ensure the receipt, coordination, and safety of goods coming through the warehouse., • Ensure products are stocked correctly and safely., • Maintain all equipment in a neat, clean, and orderly fashion., • Operate equipment safely and efficiently, while complying with OSHA and company standards., • Assist in inventory accuracy and cycle counts. Ensure proper stock rotation. Perform aisle assessments and assignments. What You'll Bring • High School Diploma or equivalent, • Valid CDL Class A or B license required. Class A preferred., • DOT Medical Card required, • Fork-lift certified a plus, • Minimum 2 Years of professional driving experience, • Clean driving record, • Ability to climb and lift a minimum 25lbs Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description 3rd Shift Monday - Friday 11:00 P.M. - 7:30 A.M. Pay Rate: $20.00 - $23.00 Per Hour, plus $1 per hour shift differential Key Responsibilities • Machine Setup and Operation: Operators are responsible for configuring the extrusion machines according to production requirements. This involves calibrating the machine settings, loading raw materials, and monitoring the process to ensure it runs smoothly., • Maintenance and Troubleshooting: Routine maintenance is critical to prevent machine downtime. Operators are expected to perform regular checks, clean equipment, and carry out minor repairs. For more complex issues, they work alongside maintenance teams to resolve problems., • Quality Control: Ensuring the quality of the output is a crucial part of the operator’s role. They must inspect products to verify that they meet the specified standards and make necessary adjustments if there are deviations., • Safety and Compliance: Given the potential hazards associated with heavy machinery, adhering to safety protocols is essential. Operators must follow all safety guidelines to protect themselves and their colleagues from accidents. Qualifications Skills and Qualifications Needed A successful extrusion operator requires a blend of technical skills, mechanical aptitude, and attention to detail. While some companies may hire individuals with a high school diploma and provide on-the-job training, many prefer candidates with a technical diploma in industrial technology or mechanical engineering. Essential Skills • Mechanical Aptitude: A strong understanding of machinery and its components is fundamental. Operators must be able to troubleshoot and solve mechanical issues quickly., • Attention to Detail: Precision is key in ensuring that products meet exact specifications. Operators must consistently monitor the extrusion process and make fine adjustments as needed., • Problem-Solving: The ability to identify and address issues promptly is critical for maintaining production efficiency., • Communication: Operators often work in teams, so clear communication is necessary to ensure that production runs smoothly and issues are addressed collectively. Career Path and Professional Development Starting as an entry-level extrusion operator offers a gateway into a stable and potentially lucrative career. With experience and continued education, operators can advance to supervisory roles, quality control positions, or even specialized technical roles. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process. Location North Brunswick Township, NJ, USA Shift 3rd Shift Position Type Permanent Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Manufacturing Quality Manager- Rochester, NY- Onsite, Base and Bonus~ This Jobot Job is hosted by: Alicia Blake Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $110,000 per year A bit about us: Innovative design, rapid prototyping and lean manufacturing for aerospace, defense, medical and industrial applications worldwide Why join us? We are a high-mix, low- to medium-volume contract manufacturer focusing on complex circuit card assemblies, microelectronics (hybrids), integration, and mechanical assembly for the Aerospace & Defense, Industrial, Medical, and Commercial markets. Provides engineering, product development, rapid prototyping, and lean, innovative manufacturing, along with testing, material management, and turnkey solutions. ACT, based in Rochester, NY, has more than 25 years’ experience in contract manufacturing. Job Details full-time on-site Rochester,NY The Quality Manager leads the organization's Quality Management System (QMS), oversees Quality Assurance operations, and drives Quality Engineering initiatives that support manufacturing excellence. This role ensures compliance with customer, commercial, and military requirements while fostering a culture of continuous improvement, operational efficiency, and high performance. The Quality Manager supervises QA staff, leads audits, manages supplier and customer quality interactions, and implements robust quality processes that support product reliability and organizational goals. Key Responsibilities Serve as the Management Representative for the QMS, ensuring compliance with AS9100 and ISO 9001 standards. Lead third-party surveillance audits and maintain certification readiness. Develop, update, and maintain QMS procedures, work instructions, and documentation. Conduct internal audits and lead quarterly Management Review Meetings. Review and control customer quality requirements throughout the project lifecycle. Manage daily operations of the Quality Assurance department, including staffing, scheduling, and performance management. Maintain and enforce quality assurance processes to ensure product conformity and on-time delivery. Define and manage end-to-end test environments, including tools, methods, and processes. Evaluate services and processes to identify deficiencies and implement improvements. Design and implement manufacturing processes, equipment, and quality procedures. Support testing of processes and products to ensure compliance with customer, commercial, and military requirements. Assist in identifying and delivering quality-related training across the organization. Participate in plant continuous improvement initiatives and support layout changes to improve flow and reduce waste. Participate in supplier evaluation, selection, approval, and performance management. Administer Customer Source Surveillance Audits. Interface with customers to review quality requirements, First Article expectations, and corrective action progress. Lead and participate in MRB, CAB, and Engineering Change Control Board activities. Drive root-cause analysis and implement corrective and preventive actions. Promote Lean initiatives including 5S, Value Stream Mapping, and Visual Factory. Track and report organizational performance metrics and quality objectives. Requirements Bachelor's degree in a related field. 8+ years of relevant technical experience and 4-6 years of management experience. Experience with AS9100 and ISO 9001 standards required. Background in aerospace, defense, electronics manufacturing, or engineering preferred. Proficiency with ERP systems (e.g., M1), Microsoft Word, and Excel. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

HyCO Production and Low-Carbon Technology Engineer\n \n \nJOB SUMMARY\n \n• Identification of applicable technology for current and future needs of Matheson Nippon Sanso HYCO (Hydrogen and Syngas) business including CO2 recovery and utilization technologies and technology solutions\n \n• Creation of development and commercialization plans for identified technologies including staged assessments and partnering plans.\n \n• Support technical and techno-economic aspects of decarbonization solutions development associated with business opportunities.\n \n• Support business, engineering, and operations functions of HYCO with the above expertise.\n \n• Identify and propose external funding options for development and commercialization of the above technologies and technical expertise.\n \n Essential Functions\n \n• Develop thorough technical understanding of emerging technologies across HYCO segments.\n \n• Identify technologies of potential value to HYCO over the long term\n \n • Assess the operational robustness of the technologies including process flow diagrams, catalyst, solvents, and equipment.\n \n• Propose and continuously update plan for evolution of technical and technology expertise within HYCO.\n \n• Flowsheet development of technologies for HyCO products generation\n \n• Techno-economic assessments of technologies and developed process flowsheets.\n \n• Development of technology rankings and sweet-spot analysis\n \n• Internal collaboration with HYCO Business functions to assess technology value and fit.\n \n• Collaboration with HYCO project execution members and external parties to develop technology testing, demonstration and engineering development plans.\n \n• Actions required to identify and secure support funding for technology development and commercializing including drafting and submittal of required grants, applications, and other associated documentation.\n \n• Understand customer needs and processes that enable the above and development of associated technology solutions.\n \n• As needed, develop process engineering and solutions inputs for all business cases (to financial model) including new investments and renewals/re-life.\n \n• Provide technology and technical coverage and inputs for HYCO customer proposals and engagement.\n \n• Prepare HYCO plant and CO2 Recovery process specifications and basis of design documentation.\n \n• Provide process expertise to project reviews (plant P&IDs, HAZOPs, and other similar reviews) and operating plants.\n \n• Provide process due diligence and process performance assessments to support existing HYCO asset acquisition and converting to a gases supply agreement.\n \n• Support plant performance tests and commissioning (as needed).\n \n• Support for optimization of plant design including controls, instrumentation, and automation.• \n \n \nTraveling to project sites, technology, and engineering partners' offices to enable the above activities\n \nRequired critical behaviors\n \n• Inclination and ability to identify and assess technologies across HyCO space.\n \n• Active technical innovation initiative\n \n• Cross-functional coordination.\n \n• Positive collaborative effort with all internal functions and personnel.\n \n• Partnership building (internal and external).\n \n• Transparency on information sharing/communication.\n \n• Willingness to travel (up to 25%) and to flex work hours to ensure coverage of critical timelines.\n \nRequired key skills (functional/technical)\n \n• Hydrogen, carbon monoxide, and syngas expertise.\n \n• Technology identification, assessment, and mapping capabilities\n \n• Ideal candidate will have working knowledge of the decarbonization field such as carbon capture from syngas/flue gas, storage, sequestration, and/or electrolysis for hydrogen production.\n \n• Ability to communicate effectively with technology and business personnel.\n \n• Familiarity with process simulation and modelling tools (UniSim, HYSYS, Aspen Plus or similar).\n \n• Basic understanding of equipment design.\n \n• Ability to understand cross-impact between conceptual design, plant design and operations.\n \n• High-level writing proficiency for formal and informal communications and documents including technical papers, assessments, funding, and grant application drafting, supporting technology sourcing and licensing agreement drafting and technical proposal writing.\n \n• Performs other duties as assigned\n \n• Complies with all policies and standards.\n \n QUALIFICATIONS\n \nMaster's Degree in chemical engineering or bachelor's degreecomplemented with adequate expertise. Electrochemistry experience is a strongplus.\n \n Knowledge, Skills and Abilities • Minimum 5 years'experience in industrial gas processes which includes direct engineeringexperience (developing HMBs, PFDs, P&IDs, equipment sizing/specification).• Technology evaluations expertise • Technology market definition expertise • Business-technical solutions development expertise • Technology developmentfunding identification and structuring expertise • Global/internationalexperience is a plus. • Cross-cultural, cross-functional working expertise. • Prior plant design or operational experience is a plus. • Candidate must beauthorized to work in the USA.\n \n PHYSICAL DEMANDS/WORKING CONDITIONS\n \nStationary Position - frequently\n \nMove/Traverse - frequently\n \nTransport/Lifting - rarely\n \nTransport/Carrying - rarely\n \nExerting Force/Pushing - rarely\n \nExerting Force/Pulling - rarely\n \nAscend/Descend - occasionally\n \nBalancing - occasionally\n \nPosition Self/Stooping - occasionally\n \nPosition Self/Kneeling - occasionally\n \nPosition Self/Crouching - occasionally\n \nPosition Self/Crawling -occasionally\n \nReaching - occasionally\n \nHandling -occasionally\n \nGrasping - occasionally\n \nFeeling - occasionally\n \nCommunicate/Talking - constantly\n \nCommunicate/Hearing - constantly\n \nRepetitive Motions - frequently\n \nCoordination -frequently \n \nComprehension -frequently\n \nOrganization - frequently\n \nReasoning & Decision - frequently\n \nCommunication - constantly\n \nResilience - frequently\n \n pay range: $80,000 to $120,000 annually\n \n \nThe Company is an Equal Opportunity Employerthat complies with the laws and regulations set forth under EEOC.. Allqualified applicants will receive consideration for employment without regardto race, color, religion, sex, sexual orientation, gender identity, nationalorigin, disability or protected veteran status. EOE AA M/F/VET/Disability

Controls Engineer \n \n Position Overview \n\n • The Controls Engineer will support industrial manufacturing operations by maintaining, troubleshooting, and improving automation and electrical control systems. This position will work closely with maintenance and engineering teams to keep production equipment running safely and efficiently, while also supporting system upgrades, equipment installations, and technical training.\n\n \n Key Responsibilities \n\n • Maintain and troubleshoot industrial automation and control systems, including PLCs, HMIs, VFDs, servo systems, robotics, computers, and industrial networks.\n, • Diagnose electrical and controls-related issues and provide technical support to the maintenance team.\n, • Modify and update PLC and other control programs to improve equipment performance, resolve issues, and support production needs.\n, • Assist with the installation and commissioning of new equipment, including network configuration, IP addressing, program installation, and system connectivity.\n, • Maintain current program backups, documentation, and records of controls-related changes.\n, • Follow established controls change-management and documentation procedures.\n, • Train maintenance personnel on basic electrical troubleshooting, controls-related issues, and component replacement.\n, • Support engineering and maintenance leadership with technical projects and day-to-day operational needs.\n, • Respond to equipment breakdowns and production floor calls as needed.\n, • Provide after-hours technical support through remote troubleshooting and on-site assistance when required.\n, • Provide technical coverage for engineering leadership when needed.\n, • Be available to work varying shifts, weekends, and holidays based on operational requirements.\n\n \n Required Qualifications \n\n • High school diploma or equivalent.\n, • At least 2 years of hands-on experience working with industrial automation and controls systems.\n, • Strong hands-on experience with Allen-Bradley PLC platforms, including SLC and Logix.\n, • Experience with PanelView HMIs, PowerFlex drives, and Kinetix servo systems.\n, • Ability to troubleshoot electrical and control systems and install or wire electrical components.\n, • Ability to read and modify electrical schematics.\n, • Working knowledge of Ethernet and industrial networking.\n, • Experience setting up and troubleshooting PCs and related hardware.\n, • Strong proficiency with Microsoft Office, particularly Excel and other spreadsheet applications.\n, • Strong communication and leadership skills.\n, • Working knowledge of mechanical systems and industrial equipment.\n, • Ability and willingness to provide on-call support and work flexible shifts, including weekends and holidays.\n\n \n Preferred Qualifications \n\n • Experience in food manufacturing or another high-volume industrial manufacturing environment.\n, • Experience supporting equipment installation, startup, commissioning, and production troubleshooting.\n, • Experience training maintenance or technical personnel on electrical and controls systems.\n\n

Engineering Manager Manufacturing \n \n\n • 5–10 years of engineering or facilities management experience in regulated manufacturing.\n, • Strong knowledge of cGMP, FDA, OSHA, EPA regulations, and engineering validation principles.\n\n \n Summary \n The Engineering Manager is responsible for overseeing manufacturing equipment, utilities, facilities, and engineering operations to ensure safe, reliable, and compliant production. This role manages capital projects, preventive maintenance, engineering documentation, and safety programs under cGMP, OSHA, EPA, and state regulations. The position requires strong leadership to guide engineers and technicians, coordinate contractors, and support continuous improvement initiatives. \n \n Key Responsibilities: \n\n • Equipment & Facilities — Oversee maintenance and reliability of manufacturing equipment, utilities, HVAC, and cleanroom infrastructure.\n, • Capital Projects — Lead expansions, installations, upgrades, and construction activities; manage CapEx budgets.\n, • Automation & Improvement — Implement robotics, cobots, and automation solutions; drive cost‑saving initiatives.\n, • Validation & Documentation — Manage SOPs, preventive maintenance systems, work orders, and validation protocols (IQ/OQ/PQ).\n, • Safety & Compliance — Ensure compliance with OSHA, EPA, and FDA cGMP standards; manage audits and incident investigations.\n, • Leadership — Supervise engineers, technicians, and facilities staff; provide training and succession planning.\n, • Vendor & Stakeholder Management — Coordinate contractors, suppliers, and service providers; present reports on budgets and projects.\n\n \n Qualifications: \n\n • Bachelor’s degree in Engineering (Mechanical, Electrical, Chemical, Industrial, Environmental) or equivalent.\n, • 5–10 years of engineering or facilities management experience in regulated manufacturing.\n, • Strong knowledge of cGMP, FDA, OSHA, EPA regulations, and engineering validation principles.\n, • Experience managing teams, contractors, and capital projects.\n, • Familiarity with automation systems, robotics, and advanced manufacturing technologies.\n\n

Job Summary: \n A Maintenance Manager oversees the maintenance and repair operations of the facility’s equipment, machinery, and buildings. They lead and mentor the maintenance team, plan and implement preventive maintenance schedules, manage vendor and contractor relationships, and ensure compliance with safety and regulatory standards. Key duties include minimizing downtime, managing maintenance budgets and inventories, conducting inspections, supporting continuous improvement initiatives, and maintaining documentation for regulatory compliance. This role requires coordination with production teams to prioritize maintenance activities and often involves managing capital projects and process improvements to increase efficiency and reduce costs. Strong leadership, communication, and technical skills in mechanical and electrical systems are essential for success in this role. \n \n Essential Functions: \n · Overseeing and directing all maintenance activities to ensure equipment, machinery, and facilities operate efficiently, minimizing downtime and disruptions. \n · Designing, implementing, and managing preventive and predictive maintenance programs to extend asset life and reduce unplanned failures. \n · Directing, training, and managing the maintenance team, including scheduling work, supervising technicians, and conducting performance reviews. \n · Managing maintenance budgets, controlling expenses, and optimizing resource allocation including spare parts inventory and contractor/vendor relationships. \n · Ensuring compliance with safety regulations, legal standards, and company policies to maintain a safe working environment. \n · Coordinating with production and other departments to prioritize maintenance tasks aligned with operational goals. \n · Utilizing technology such as ERP systems for work order tracking, asset management, and reporting. \n · Conducting inspections, analyzing maintenance data, and preparing reports on maintenance activities and key performance indicators (KPIs). \n · Guiding continuous improvement initiatives to enhance maintenance processes, efficiency, and equipment reliability. \n · Managing capital projects related to equipment upgrades, replacements, or installations. \n · Enforcing safety programs including lock-out/tag-out, confined space entry, and other regulatory compliance protocols. \n \n Qualifications & Experience: \n REQUIRED QUALIFICATIONS: \n · A technical associate degree or a bachelor's degree in engineering, industrial technology, facilities management, or a related field is often preferred. However, equivalent combinations of education and extensive experience can also qualify. \n · Typically, 5 to 10 years of hands-on maintenance experience, including supervisory or leadership roles in an industrial or manufacturing setting. \n · Proficiency in maintenance processes including preventive, predictive, and reliability-centered maintenance. Knowledge of or exposure to mechanical and electrical systems, PLC troubleshooting, and computerized maintenance management systems (CMMS) like IFS or SAP. \n · Strong leadership and team management abilities, excellent communication skills, problem-solving and critical thinking, organizational planning, adaptability, and safety leadership. \n · Knowledge of safety regulations and compliance (e.g., OSHA), inventory control management, data analysis for maintenance metrics, and Demonstrated ability to lead continuous improvement initiatives. \n PREFERRED QUALIFICATIONS: \n · Certifications such as Certified Maintenance and Reliability Professional (CMRP), or training in safety and project management. \n \n Knowledge & Employment Standards \n \n TECHNICAL SKILLS & CORE COMPETENCIES: \n · Knowledge of industrial operations, maintenance, and engineering principles. \n · Ability to develop, track, and manage project schedules, budgets, and resources. \n · Competence with project management and collaboration software (e.g., MS Project). \n · Understanding of industrial equipment, production systems, and maintenance planning. \n · Familiarity with procurement, contract management, and vendor relations. \n · Ability to interpret technical drawings, schematics, and specifications. \n · Experience with risk management, cost estimation, and resource allocation. \n SOFT SKILLS & ORGANIZATIONAL CULTURAL FIT: \n · Demonstrates strategic leadership and collaborative team management in professional settings. \n · Demonstrates must have strong written and verbal communication across organizational levels in professional settings in professional settings. \n · Demonstrates has advanced problem-solving and analytical thinking in professional settings in professional settings. \n · Ability to train, mentor, and develop team members. \n \n What We Offer: \n \n List of benefits, perks, and professional growth opportunities our company provides such as: \n\n • Medical, Dental, and Vision Insurance\n, • 401(k) Retirement Plan with Company Match\n, • Paid Time Off (PTO) and Holidays\n, • Tuition Reimbursement Program\n, • Employee Referral Program\n, • Inclusive and Collaborative Work Culture\n\n \n Note: \n Please note that we are not currently engaging with third-party staffing or recruitment agencies. We kindly request that agencies refrain from submitting unsolicited candidate resumes or partnership inquiries.

Position Overview \n Client is seeking a Senior Controls Engineer to lead the design, programming, integration, and commissioning of automation systems for custom industrial mixing, blending, drying, and material processing equipment. This position will play a critical role in developing machine control systems that support our customers' manufacturing operations across pharmaceutical, food, chemical, additive manufacturing, and specialty materials industries. \n The successful candidate will work closely with mechanical engineers, project managers, manufacturing personnel, and customers to develop reliable, user-friendly automation solutions from concept through startup. This role requires a hands-on engineer who can balance technical expertise, project execution, and customer interaction while supporting both new equipment and retrofit projects. \n \n Key Responsibilities \n Controls System Design & Development \n\n • Design complete control systems for industrial processing equipment and integrated production systems.\n, • Develop PLC, HMI, and SCADA applications to support machine operation, process control, recipe management, and data collection.\n, • Create functional specifications, control narratives, and machine operating sequences.\n, • Develop and maintain control system standards that promote consistency, scalability, and maintainability.\n, • Evaluate and implement emerging automation technologies to improve machine performance and customer value.\n, • Work with customers to develop specifications and expectations.\n\n Electrical & Controls Engineering \n\n • Develop:\n, • I/O lists\n, • Electrical schematics\n, • Network architecture drawings\n, • Control panel layouts\n, • Instrumentation specifications\n, • Alarm and fault management strategies\n, • Specify and integrate instrumentation, drives, motors, sensors, load cells, safety devices, and process equipment.\n, • Support panel design and review electrical drawings for compliance with applicable codes and standards.\n\n Programming & Integration \n\n • Program and troubleshoot PLC-based control systems.\n, • Develop HMI interfaces that provide intuitive operator interaction and system diagnostics.\n, • Configure industrial communications networks and integrate third-party equipment.\n, • Support database connectivity, reporting systems, and production data acquisition where required.\n, • Collaborate with OEM suppliers and customers during integration activities.\n\n Project Execution \n\n • Participate in project planning, budgeting, scheduling, and execution.\n, • Coordinate controls-related activities with internal teams, vendors, and customers.\n, • Support procurement and technical review of automation hardware and software.\n, • Ensure controls deliverables are completed on schedule and within project requirements.\n\n Testing & Commissioning \n\n • Develop and execute Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).\n, • Lead machine startup and commissioning activities at customer facilities.\n, • Perform troubleshooting, loop checks, functional testing, and system validation.\n, • Provide operator and maintenance training following installation.\n\n Customer Support & Continuous Improvement \n\n • Assist customers with troubleshooting, upgrades, and system improvements.\n, • Support retrofit and modernization projects for existing equipment.\n, • Document lessons learned and incorporate improvements into future designs.\n, • Help develop standardized automation platforms across product lines.\n\n Safety & Compliance \n\n • Design systems that comply with applicable electrical, machine safety, and industry standards.\n, • Participate in machine risk assessments and safety system reviews.\n, • Support implementation of safe machine operation and maintenance practices.\n\n Required Qualifications \n Education \n\n • Bachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, Mechatronics, or a related engineering discipline.\n\n Experience \n\n • 5+ years of experience in industrial automation, controls engineering, machine design, or manufacturing systems.\n, • Experience supporting custom machinery, OEM equipment, or process manufacturing environments.\n, • Proven experience managing projects from design through commissioning.\n\n Technical Skills \n\n • Strong experience with:\n, • Allen-Bradley ControlLogix and CompactLogix platforms\n, • Siemens PLC platforms\n, • FactoryTalk View, WinCC, Ignition, or comparable HMI software\n, • Knowledge of industrial communication protocols including:\n, • Ethernet/IP\n, • Profinet\n, • Modbus TCP/RTU\n, • OPC-UA\n, • Experience with:\n, • Variable frequency drives (VFDs)\n, • Motion control systems\n, • Industrial instrumentation\n, • Safety circuits and machine safeguarding\n, • Familiarity with SQL databases and industrial data collection systems.\n, • Ability to read and create electrical schematics and control documentation.\n\n Professional Skills \n\n • Strong analytical and troubleshooting abilities.\n, • Excellent written and verbal communication skills.\n, • Ability to manage multiple projects simultaneously.\n, • Customer-focused mindset with strong interpersonal skills.\n\n Preferred Qualifications \n\n • Experience with powder processing, blending, drying, pharmaceutical, food, or chemical manufacturing equipment.\n, • Knowledge of batch process control systems.\n, • Familiarity with UL 508A panel design requirements.\n, • Experience with validation protocols including FAT, SAT, IQ, and OQ documentation.\n, • Exposure to Industry 4.0 technologies, remote diagnostics, and predictive maintenance systems.\n

Operations Manager – Clean Energy | South Plainfield, NJ \n \n Partnered with a leading electrical contractor, seeking a Operations Manager to take ownership of its growing Clean Energy division across New Jersey. \n \n This is a division-level leadership position for an experienced electrical construction professional who can operate across project delivery, operations, commercial performance, estimating, client management and team leadership. \n \n You’ll oversee a portfolio of complex clean energy projects and provide leadership from pre-construction and estimating through field execution, closeout and client delivery. \n \n What you'll be responsible for: \n \n • Lead and oversee multiple concurrent Clean Energy projects \n • Manage and mentor Project Managers, Engineers and Field Leadership \n • Own division-level financial performance, forecasting and cost control \n • Review CPM schedules and provide guidance on sequencing, recovery and risk \n • Support estimating, bid reviews, technical proposals and value engineering \n • Lead change order, claims and contract management \n • Oversee subcontractor negotiations, onboarding and performance \n • Develop and maintain senior-level client relationships \n • Provide technical guidance on complex electrical systems and construction challenges \n • Support engineering teams to deliver projects on schedule and budget \n • Drive manpower planning, production tracking and project performance \n • Represent the business in owner, GC and executive-level meetings \n • Build strategic partnerships, teaming arrangements and JV opportunities \n • Promote a strong safety, accountability and high-performance culture \n \n What we're looking for - 15+ years of Project Management experience within electrical construction, with proven progression into senior operational leadership. \n \n Ideally, you'll bring: \n \n • 3–5+ years of Operations / senior management experience \n • Extensive electrical installation and construction management expertise \n • Experience managing large, complex commercial or industrial projects \n • Strong experience within a union electrical environment – essential \n • Experience with GIS, EHV, BESS or other clean energy infrastructure \n • Design-Build / EPC project experience \n • Strong estimating experience; McCormick knowledge is a plus \n • Strong commercial, contractual and financial understanding \n • Experience managing Project Managers, Engineers and Field Leadership \n • Strong knowledge of construction planning, scheduling and project controls \n • Proficiency with Procore and Microsoft Office \n • Bachelor's degree in electrical engineering, construction or a related discipline, or equivalent experience \n • OSHA-30 is a plus \n \n The opportunity: \n \n 📍 South Plainfield, NJ \n 🏗️ Clean Energy / Electrical Construction \n 👥 Senior Division Leadership \n ⚡ GIS | EHV | BESS | EPC / Design-Build \n 📈 Significant opportunity to influence growth, profitability and project delivery \n \n T successful individual will have the opportunity to take a step into a true operational leadership role, overseeing people, projects, clients and financial performance across an entire division. \n \n If you're currently a Senior Project Manager, Operations Manager, Director of Operations or similar senior electrical construction leader and are interested in discussing the opportunity confidentially, feel free to reach out directly. \n \n +1 646 396 5018 \n tom.nicholls@metric-search.com \n

Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 1st shift (8:30AM – 5PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. \n This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. \n The Process Engineer will be expected to work on-site five days a week in our Somerset, NJ office. \n \n Key Responsibilities: \n\n • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution.\n, • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone).\n, • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness.\n, • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput.\n, • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff.\n, • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control.\n, • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning.\n, • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas.\n, • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations\n\n \n Other Important Responsibilities: \n\n • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed.\n, • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate.\n, • Other miscellaneous duties as assigned.\n\n \n Qualifications: \n\n • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field).\n, • A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations).\n, • Proven experience in yield improvement, root cause analysis, and process troubleshooting.\n, • Familiarity with NPI processes, including process validation and production readiness.\n, • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies.\n, • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP).\n, • Excellent communication and collaboration skills across shifts and cross-functional teams.\n, • Willingness to work on the weekends or afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed.\n, • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device).\n, • Six Sigma Green Belt or Lean certification.\n, • Hands-on experience with automation systems, sensors, or high-throughput equipment.\n\n \n Physical requirements and work environment: \n\n • Must be able to lift 20 lbs;\n, • Must be able to sustain office work for 8+ hours per day including the following:\n, • Sitting in an office chair\n, • Typing\n, • Reaching for the telephone\n, • Standing at office equipment\n, • Hearing for phone use\n, • Sight for computer use\n, • Must be able to sustain factory work as needed including the following:\n, • Standing at machinery\n, • Reaching and pulling to operate machinery\n, • Sight for machinery operation\n, • Walking through shop\n, • Office environment is of moderate noise level.\n, • Shop noise levels are such that protective ear-coverings are recommended.\n\n

About Eos Energy Enterprises \n Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. \n \n Responsibilities \n\n • Troubleshoot battery storage systems to identify and resolve issues\n, • Manage a ticketing system to ensure that customer requests and issues are addressed promptly\n, • Collaborates with services and product teams, vendors, and others to develop and implement performance metrics, reports, and data analytics to track system performance and identify areas for improvement\n, • Analyze system data to identify trends and potential issues before they become critical\n, • Collaborate with other members of the Services team to develop and implement new processes and procedures to improve system performance and customer satisfaction\n, • Assist with developing and implementing training programs for customers and other Services team members\n, • Provide technical support to customers and Services team members as needed, either remotely or on-site\n, • Maintain up-to-date knowledge of new technologies and industry trends related to battery storage systems\n, • Contribute to knowledge library of internal and external facing technical solutions to improve organizational and customer knowledge of products and usage\n, • Support Projects and Services organizations as needed.\n, • Must be able to work on-call, including weekends and holidays, as needed\n, • May be required to work on-site at customer locations, which may include working in confined spaces or at heights.\n, • Must be able to lift up to 50 pounds\n\n \n Knowledge, Skills, and Abilities \n\n • Strong analytical and problem-solving skills\n, • Excellent communication and interpersonal skills\n, • Ability to work independently and as part of a team\n, • Willingness to learn and adapt to new technologies and processes\n, • Strong attention to detail and ability to manage multiple priorities.\n\n \n Education and Experience \n\n • Bachelor's Degree in Engineering required\n, • Minimum of 5 years' related experience\n\n Travel \n\n • Local Travel\n, • Overnight/North America\n\n Working Conditions \n\n • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.\n\n

About Eos Energy Enterprises \n Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. \n \n About the Role \n This role sits at the intersection of Eos's battery system design and its real-world deployment, closing the loop between how our BESS is engineered and how it is actually built, commissioned, and serviced in the field. The Engineer, Product Serviceability & Field Reliability will translate field failure data, commissioning friction, and O&M feedback into concrete product design inputs — while equipping Field Services and EPC partners with the technical standards, diagnostics, and documentation needed to service Eos systems efficiently and safely. \n Responsibilities \n\n • Serve as the primary technical liaison between Product Engineering and Field Services/execution, ensuring design decisions account for constructability, commissioning sequencing, and long-term serviceability.\n, • Support Field Quality team lead root cause analysis (RCA) on field-reported hardware/firmware failures and translate findings into design change requests, retrofit specs, or service bulletins.\n, • Build and maintain or support SQL-based fleet telemetry monitoring to flag precursor failure signatures across deployed Eos systems, and use Python for diagnostic scripting and trend analysis.\n, • Author and maintain technical due diligence standards and field-readiness documentation used by EPC partners, Field Services, and internal stakeholders.\n, • Identify and resolve thermal, mechanical, and power-delivery bottlenecks that impact serviceability, commissioning timelines, or asset reliability.\n, • Partner with Commissioning and Field Services teams to reduce time-to-resolution on site issues by improving diagnostic tooling, spare parts logic, and troubleshooting documentation.\n, • Support RFP and pre-sale technical due diligence by providing serviceability and reliability input on proposed system designs.\n, • Contribute to fleet-wide uptime KPIs and report data-driven reliability trends to Deployment leadership.\n\n Education and Experience \n\n • 5+ years in utility-scale BESS or related power systems, with direct experience bridging OEM/product engineering and EPC/field execution.\n, • Demonstrated experience in performance testing, capacity validation, or commissioning of megawatt-scale energy storage systems.\n, • Strong root cause analysis background across hardware/firmware failure modes.\n, • Proficiency in SQL for fleet telemetry monitoring and Python for diagnostic/data analysis.\n, • Experience authoring technical standards or due diligence documentation used cross-functionally.\n, • M.S. in Engineering (or equivalent experience); specialization in sustainable energy systems a plus.\n, • Comfortable operating in ambiguity at a growth-stage OEM, translating field-level signal into upstream design action.\n\n Travel \n\n • Local Travel\n, • Overnight/North America: 75%\n\n Working Conditions \n\n • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.\n\n

New Business Development Associate / Operations Support \n \n Location & Work Environment \n Employment Type: Full-Time \n \n Work Location: On-Site \n \n This is a full-time, on-site position. The successful candidate is expected to work from the company's office in Somerset, New Jersey. The company anticipates relocating its office operations to South Plainfield, New Jersey, by the end of 2026, and the selected candidate will be expected to work from the South Plainfield location upon completion of the move. \n \n This role requires regular in-person collaboration with employees across sales, engineering, finance, customer service, operations, and management. While some travel may be required for customer visits, trade shows, training, and business development activities, this position is not considered remote or hybrid. \n \n Position Summary \n Ogura Industrial Corp is seeking a motivated, self-starting New Business Development Associate / Operations Support to support both existing customer accounts and new business growth initiatives. \n This position combines customer account management, business development, sales support, and marketing activities. The successful candidate will serve as a key contact for customers while identifying new opportunities, supporting sales growth strategies, conducting market research, and collaborating with cross-functional teams to drive business success. \n This role offers an excellent opportunity for an ambitious professional seeking exposure to technical sales, customer relationship management, marketing, and strategic business development within a global manufacturing organization. \n \n Essential Responsibilities \n Operations Support \n\n • Support assigned customer accounts.\n, • Respond promptly to customer inquiries regarding products, pricing, quotations, orders, deliveries, and technical requests.\n, • Maintain accurate customer records and account information.\n, • Monitor customer satisfaction and proactively address concerns.\n, • Coordinate with sales, engineering, logistics, customer service, finance, and management teams to ensure customer needs are met.\n, • Resolve issues related to product availability, quality, delivery, and billing.\n, • Track orders and customer requirements through successful completion.\n, • Assist with preparing reports, forecasts, documentation, and account-related communications.\n, • Identify opportunities to expand customer relationships and support additional business opportunities.\n\n New Business Development Associate \n\n • Become familiar with the company's vision, mission, products, and strategic objectives.\n, • Conduct market research and identify prospective customers, industries, and market opportunities.\n, • Develop and cultivate relationships with new clients while maintaining existing customer relationships.\n, • Identify and pursue new business opportunities, strategic partnerships, and growth initiatives.\n, • Work closely with Regional Sales Managers and Territory Sales Representatives.\n, • Assist in developing sales strategies, customer retention programs, and market expansion initiatives.\n, • Analyze sales and market data to support business decisions and marketing efforts.\n, • Prepare and support sales presentations, proposals, business plans, reference materials, and customer communications.\n, • Support digital marketing and lead-generation initiatives.\n\n Collaboration & Communication \n\n • Work collaboratively with employees across sales, engineering, finance, customer service, operations, and management.\n, • Participate in customer interactions through phone calls, email, web meetings, trade shows, and in-person visits.\n, • Manage multiple projects concurrently while meeting deadlines.\n, • Demonstrate professionalism, initiative, and strong interpersonal skills when interacting with customers, colleagues, and business partners.\n, • Work independently when required while remaining an effective team contributor.\n\n Qualifications & Education Requirements \n\n • Bachelor's degree required.\n, • Engineering background preferred, but open to a mechanically oriented candidate or someone with a technical background or experience.\n, • Experience in marketing and technical sales is considered a strong advantage.\n, • Minimum of 3 years of relevant experience in business development, account management, technical sales, marketing, customer service, or a related field preferred.\n, • Experience within industrial, manufacturing, engineering, automation, motion control, or technical product environments is beneficial.\n, • Familiarity with CRM systems, ERP software, and business reporting tools preferred.\n\n Preferred Skills \n\n • Excellent written and verbal communication skills.\n, • Strong interpersonal and relationship-building abilities.\n, • Tech-savvy and comfortable utilizing modern sales and communication tools.\n, • Strong organizational and project management skills.\n, • Analytical mindset with the ability to interpret data and identify trends.\n, • Friendly, professional, and customer-focused demeanor.\n, • Ability to manage multiple priorities in a fast-paced environment.\n, • Proficiency with Microsoft Office Suite and relevant business software applications.\n, • Strong attention to detail and problem-solving skills.\n\n Training & Career Development \n\n • Comprehensive product and industry training provided.\n, • Ongoing professional development and training opportunities available.\n, • Exposure to a broad range of industries and applications including:\n, • Robotics\n, • Electric vehicles\n, • Medical equipment\n, • Warehouse automation\n, • Motors and motion-control systems\n, • Pumps and compressors\n, • Hydrogen fuel cell technology\n, • Lawn and outdoor power equipment\n, • Agricultural machinery\n, • Off-highway vehicles\n, • Automotive automation\n, • Forestry equipment\n, • Electrification projects\n\n Additional Information \n\n • Some travel can be expected.\n, • Opportunity for career advancement and upward mobility within a growing organization.\n, • Unique opportunity to gain experience across customer account management, technical sales, marketing, and business development functions.\n, • Ideal for candidates interested in developing a long-term career within industrial manufacturing and engineering-driven markets.\n\n Join Ogura Industrial Corp and contribute to the growth of a global leader in clutch, brake, and motion control technologies while building valuable experience in customer management, technical sales, and business development.

Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 3rd shift (11 PM – 7 AM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. \n This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. \n \n The Process Engineer will be expected to work daily on-site in our Somerset, NJ office. \n\n • Covering weekend shifts will be required occasionally.\n\n \n Key Responsibilities: \n\n • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution.\n, • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone).\n, • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness.\n, • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput.\n, • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff.\n, • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control.\n, • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning.\n, • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas.\n, • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations\n\n \n Other Important Responsibilities: \n\n • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed.\n, • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate.\n, • Other miscellaneous duties as assigned.\n\n \n Qualifications: \n\n • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field).\n, • A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations).\n, • Proven experience in yield improvement, root cause analysis, and process troubleshooting.\n, • Familiarity with NPI processes, including process validation and production readiness.\n, • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies.\n, • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP).\n, • Excellent communication and collaboration skills across shifts and cross-functional teams.\n, • Willingness to work on the afternoon shift (11 PM – 7 AM) and occasionally support coverage across other shifts as needed.\n, • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device).\n, • Six Sigma Green Belt or Lean certification.\n, • Hands-on experience with automation systems, sensors, or high-throughput equipment.\n\n \n Physical requirements and work environment: \n\n • Must be able to lift 20 lbs;\n, • Must be able to sustain office work for 8+ hours per day including the following:\n, • Sitting in an office chair\n, • Typing\n, • Reaching for the telephone\n, • Standing at office equipment\n, • Hearing for phone use\n, • Sight for computer use\n, • Must be able to sustain factory work as needed including the following:\n, • Standing at machinery\n, • Reaching and pulling to operate machinery\n, • Sight for machinery operation\n, • Walking through shop\n, • Office environment is of moderate noise level.\n, • Shop noise levels are such that protective ear-coverings are recommended.\n\n

Electrical Technician \n \n Are you looking to make a career change to a stable company? This exciting opportunity offers a competitive salary, immediate hiring, and a friendly work environment. The ideal candidate will modify, repair, and improve existing electrical products, production machinery, and control systems while serving as a key technical resource and periodic backup to the Maintenance Manager. \n \n Shift Schedule: \n\n • Monday – Friday: 8:00 AM – 5:00 PM\n\n \n Key Responsibilities & Duties: \n\n • Electrical Maintenance & Repairs: Perform electrical maintenance and repairs, as well as modify and install production process equipment.\n, • Troubleshooting & Diagnostics: Diagnose, repair, and modify electrical and electronic production machinery, components, and relay logic circuits using multimeter diagnostics.\n, • Control Systems Maintenance: Troubleshoot, program, and install PLCs, HMIs, VFDs, and temperature controllers.\n, • Systems Expertise: Maintain, troubleshoot, and install automated HVAC/R systems, electrical networks, and industrial motors.\n, • Safety & Compliance: Conduct regular safety checks, identify potentially dangerous electrical conditions, and take immediate corrective action.\n, • Technical & Operational Support: Read and interpret electrical and mechanical drawings, utilize computer-assisted design tools, source replacement parts, and serve as backup to the Maintenance Manager as required.\n, • Leadership & Collaboration: Assist in directing crew tasks, foster positive team collaboration, and follow pre-established operational guidelines.\n\n \n Qualifications & Requirements: \n\n • Technical Proficiency: Hands-on experience with 24V, 110V, 220V, and 480V systems, basic circuitry, VFD programming, PLCs, and multimeter operation.\n, • Technical Schematics: Proven ability to read and understand both electrical and mechanical blueprints and schematics.\n, • HVAC/R & Motor Experience: Extensive background working with automated HVAC/R systems, electrical distribution systems, and industrial motors.\n, • Software & Systems: Proficient with Microsoft Office Suite and CAD/computer-assisted engineering software.\n\n \n Compensation & Benefits: \n\n • Competitive Salary\n, • Immediate Hire Opportunity\n, • Comprehensive Insurance: Medical, Dental, and Vision Insurance\n, • Paid Time Off (PTO)\n, • Friendly Work Environment\n\n

Principal - Manufacturing Procurement & Supply Chain Transformation - Infosys Consulting \n Infosys Consulting, the management and technology consulting unit of Infosys Ltd, is seeking motivated Manufacturing Industry Consultants. Management Consultants seeking long-term growth and career-enhancing opportunities will find both as part of our team of front-runners in Manufacturing Industry consulting. The ideal candidate will have a minimum of 12 years’ experience in the Manufacturing sector with a strong understanding of one or more of the following industries: Automotive, Aerospace, Defense and Industrial Products. Successful candidates will understand manufacturing, distribution and supply chain for discrete and continuous manufacturing processes, including enabling technologies. \n \n About the Role \n As a Principal, you will lead and manage delivery of consulting engagements, being responsible for quality, budget and staffing, working closely with senior client managers. You will contribute to the firm’s development by guiding and mentoring teams and sharing knowledge. You will be recognized as an expert in your respective domain and contribute to advancing Infosys Consulting’s thought leadership in the industry. \n Strategy & Design \n\n • Develop strategy and implementation roadmaps to help manufacturing companies transform and modernize their operations for improved throughput, quality and efficiency\n, • Lead customer research, customer journey and persona definition exercises, design end-user experiences,\n, • Support business case and roadmap definitions by linking digital capabilities tow business value levers/benefits\n, • Assess direct material procurement processes including sourcing, supplier qualification, supplier development, should-cost analysis, spend management, supplier performance management and procurement risk mitigation\n, • Assess indirect procurement processes including MRO, facilities, logistics, transportation, IT, contingent labor and professional services procurement to identify savings opportunities and process improvements\n, • Define procurement target operating models, governance structures, controls, buying channels and procurement organization designs that improve compliance, spend visibility and supplier performance\n\n \n Consulting Delivery \n\n • Lead the design and delivery of client advisory, solution delivery and organizational transformation engagements in standalone projects or as part of wider client programs\n, • Advise clients on strategy and detailed use cases by leveraging insights from industry best practices\n, • Lead and manage a team of consultants to develop concise and practical strategies, roadmap and/or re-engineering program recommendations with a clear implementation path\n, • Seek out client input in a structured manner to better understand needs and develop ideas for how to meet those needs\n, • Collaborate with clients to define long-term vision, goals and strategies\n, • Direct teams of global consulting, IT professionals & subject matter experts in establishing comprehensive business and functional requirements, then translating those requirements into actionable project initiatives with associated metrics\n, • Play a key liaison and coordinator between the business, IT, senior management, vendor teams and other members of the change programs\n, • Lead procurement transformation engagements from current-state assessment and business requirements through process redesign, ERP implementation, testing, deployment and adoption\n, • Advise clients on category strategy, strategic sourcing, supplier segmentation, spend analytics, sourcing governance and procurement performance measurement\n, • Lead initiatives focused on supplier collaboration, supplier relationship management, procurement digitization and supply risk management\n\n \n Practice Development \n\n • Provide insights on new and emerging manufacturing best practices and contribute to the development of service offerings\n, • Work with other practice members to support Infosys Consulting thought leadership activities and develop innovative assets, including differentiated points of view and methodologies\n, • Build social networks that enable knowledge and information flow and stay abreast of market trends and how manufacturing companies need to respond\n, • Prepare thought papers and participate in industry conferences and forums\n, • Contribute to practice growth and vitality through roles such as recruitment, training and retention\n\n \n People Management \n\n • Coach and develop junior team members to deliver quality results and promote professional development\n\n \n Business Development \n\n • Lead small, medium sized sales pursuits and business development activities ranging from creation of client proposals to formulating commercial constructs / contracts\n, • Develop and build relationships at senior management and CXO levels\n, • Formulate and present Infosys Consulting propositions and service offerings\n, • Basic Qualifications\n, • Bachelor’s degree or foreign equivalent required\n, • Minimum 12 years of relevant experience with at least 3-5 years of management consulting experience at a top-tier consulting firm or manufacturing company\n, • 5-7 years of experience in working on one or more of the following areas – Manufacturing, Quality, Supply Chain, Technology\n, • 5+ years of experience in procurement, sourcing, purchasing, supplier management or procurement transformation programs\n, • Experience working with direct procurement processes including raw materials, components, production materials, supplier quality management and supply continuity programs\n, • Experience working with indirect procurement categories including MRO, facilities, logistics, transportation, IT, contingent labor and professional services\n, • Hands-on consulting or program experience with procurement capabilities within Oracle Cloud ERP, SAP S/4HANA, SAP Ariba, Coupa, Jaggaer or equivalent enterprise procurement platforms\n, • Working knowledge of design thinking\n, • Demonstrated ability in defining, mobilizing and delivering complex programs in large organizations\n, • Strong background of leading teams, comprising both business and IT specialists\n, • A demonstrable ability to turn business requirements into technology solutions with the commercial acumen to create supporting business cases\n, • Excellent presentation and facilitation skills with ability to build relationships at senior management and CXO levels\n, • Must be willing and able to travel up to 80%, depending on client requirements\n, • Live within 2 hours’ drive time or be willing to relocate to one of the following Infosys hub offices – Chicago, IL, Indianapolis, Dallas, Houston, Philadelphia and New Jersey.\n, • Ability to travel extensively\n, • Candidates authorized to work for any employer in the United States without employer-based visa sponsorship are welcome to apply. Infosys is unable to provide immigration sponsorship for this role at this time.\n, • Preferred Qualifications\n, • MBA or equivalent advanced degree\n, • CPSM, CPSD, CIPS, CSCP, CPIM or equivalent procurement and supply chain certification preferred\n, • Expertise in one or more procurement disciplines including strategic sourcing, category management, supplier development, contract lifecycle management, procurement operations or supplier relationship management\n, • Experience leading Source-to-Pay (S2P), Procure-to-Pay (P2P) or Procurement Center of Excellence transformation initiatives within global manufacturing organizations\n, • Experience developing spend analytics, procurement KPI frameworks, supplier scorecards, savings tracking methodologies and procurement performance dashboards\n, • Experience designing global procurement shared-services organizations, procurement operating models, governance frameworks and service-delivery structures\n, • Depth in one or more ERP procurement areas including Supplier Management, Strategic Sourcing, Contract Management, Requisitioning, Purchasing, Inventory Management, Supplier Collaboration and Accounts Payable integration\n, • Experience leading programs where stakeholder engagement is a key requisite to achieving successful program/project delivery\n, • Proven ability to deliver under tight deadlines and challenging constraints\n, • Ability to collaborate within the firm and leverage existing resources\n, • Working knowledge of agile methodologies\n, • Demonstrate thought leadership, ability to conceptualize and drive new solution / service offerings and take them to market\n, • Ability and willingness to work as part of a cross-cultural team including flexibility to support multiple time zones when necessary\n\n \n The total compensation for this role is between $154,375 to $193,125 \n \n EEO/About Us : \n Benefits \n Along with competitive pay, as a full-time Infosys employee you are also eligible for the following benefits: \n\n • Medical/Dental/Vision/Life Insurance\n, • Long-term/Short-term Disability\n, • Health and Dependent Care Reimbursement Accounts\n, • Insurance (Accident, Critical Illness , Hospital Indemnity, Legal)\n, • 401(k) plan and contributions dependent on salary level\n, • Paid holidays plus Paid Time Off\n\n About Us \n Infosys is a global leader in next-generation digital services and consulting. We enable clients in more than 50 countries to navigate their digital transformation. With over four decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem. \n \n EEO \n Infosys provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.

Senior Electrical Estimator Join one of New Jersey's premier electrical construction and telecommunications firms, delivering complex projects across data centers, healthcare facilities, substations, pharmaceutical plants, and critical infrastructure environments. This is an excellent opportunity to contribute to high-profile projects while advancing your career with an industry leader. Job Duties & Responsibilities Prepare accurate estimates and proposals for electrical power, lighting, medium-voltage distribution, and related electrical construction projects. Perform quantity takeoffs, develop detailed labor and material cost estimates, and obtain vendor and subcontractor pricing. Review bid documents, evaluate subcontractor scopes, and assist with contract modifications and change order pricing. Participate in project turnover, kickoff meetings, and ongoing collaboration with project management teams to support successful project execution. Required Skills & Experience 10+ years of experience estimating commercial or industrial electrical construction projects. Demonstrated experience with electrical power and lighting systems, including projects involving substations, hospitals, pharmaceutical facilities, or data centers. Experience with hard-bid contracts, conceptual estimating, and managing multiple estimates simultaneously. Proficiency with Microsoft Office and strong communication, organizational, and interpersonal skills. Preferred Skills & Experience Bachelor's Degree in Electrical Engineering or a related technical discipline. Experience using ConEst estimating software. Benefits Opportunity to work on large-scale, technically challenging electrical construction projects. Collaborative team environment with strong career growth potential and exposure to industry-leading clients. Apply Today If you're an experienced electrical estimator looking to make an impact on complex, high-value projects, we encourage you to apply today. Disclaimer: By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at Synerfac Technical Staffing

Position Overview Our client, a semiconductor manufacturing company, is seeking a Senior Mechanical Design Engineer to lead by hands-on example and collaborate with a team of engineers in designing advanced thin-film chemical vapor deposition and related systems. The ideal candidate will have extensive experience with SolidWorks and Microsoft Office. Proficiency in thermal and fluid (gas) dynamics modeling, FEA, and program management is highly desirable and considered a strong plus. This role involves design, prototyping, documentation, bill of materials creation, budget management, quoting, vendor and customer engagement and support, as well as occasional domestic and international travel. Key Responsibilities Design, implement, maintain, and improve products and systems Utilize engineering tools such as SolidWorks, AutoCAD, and other design software for computer-aided design and technical tasks Prepare detailed project cost estimates, delivery schedules, and related documentation Develop and enforce construction, manufacturing, and installation standards Create and maintain technical documentation, including operational manuals, P&IDs;, and PFDs Write reports, deliver presentations, and conduct meetings with clients and management Oversee maintenance programs, inspections, and system upgrades Ensure quality assurance and adherence to project specifications Interact with clients, vendors, and cross-functional teams to ensure project success Provide hands-on support for the assembly, testing, and troubleshooting of designs Collaborate on control systems design, including PLCs and industrial protocols (e.g., Modbus TCP/IP, EtherCAT Qualifications 1. Bachelor's and/or Master's degree in Mechanical Engineering or equivalent, with 5+ years of experience in mechanical design, preferably in semiconductor, vacuum, or complex equipment manufacturing 2 Proficiency in SolidWorks, AutoCAD, and Microsoft Office Suite 3. Strong knowledge of electrical schematics, microprocessors, and microcontrollers, with familiarity in PLCs and control systems (Modbus TCP/IP, EtherCAT) a significant plus 4. Demonstrated expertise in project management, analytical thinking, and problem-solving, with excellent verbal and written communication skills By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Job Type: Full Time Shift: 8:00 - 4:00, M-F Expected Hours: 40 Our client is an industrial construction specialist that is looking to add a Assisatnt Porject manager to their team. This role oversees all aspects of preconstruction and construction project management from initial planning through final completion. The position is responsible for coordinating project activities, aligning deliverables with client expectations, and ensuring all functional, quality, and performance standards are met. Manage multiple construction projects at once. Participate in design-build project planning, design programming, and development of project outline specifications Oversee project design team and responsible for management of design-build construction Prepare conceptual and detailed estimates. Coordinate project bidding efforts, generate scopes of work Manage submittal process to ensure materials are procured Manage supervisory and engineering personnel, inspectors, and suppliers Civil Engineering or Construction Management Degree 1-3+ years of New Jersey Commercial / Industrial Project Management experience (not residential) Experience with Computer Aided Design (CAD) Ability to travel to job site locations as needed. Site work experience, ability to manage multiple projects at once Warehouse, Big-Box, tilt-up experience Experience working with Procore, estimating, and contracts

Job Description Location: New Brunswick, NJ (Hybrid) Job Type: Full-Time Eligibility: Must reside in New Jersey and be authorized to work in the United States About the Role We are seeking an analytical and detail-oriented Energy Engineer, Data Analytics & CRM to support the delivery of commercial and industrial energy efficiency programs throughout New Jersey. This position combines energy engineering expertise with advanced data analysis skills to ensure the quality, accuracy, and performance of energy efficiency program data. The ideal candidate is passionate about clean energy, enjoys working with large datasets, and has experience using CRM and reporting systems to drive data quality and program insights. In this role, you will collaborate with program managers, utility clients, and cross-functional teams to validate savings calculations, improve reporting processes, and support the successful implementation of energy efficiency programs. What You'll Do: Data Analysis & Quality Assurance • Analyze large datasets related to energy efficiency programs, projects, and portfolios., • Review project and measure-level data for completeness, accuracy, and compliance with program requirements., • Validate energy savings calculations against established technical methodologies and industry standards., • Identify and investigate data anomalies, outliers, and inconsistencies and implement corrective actions., • Develop, maintain, and analyze exception reports to proactively identify missing documentation, duplicate submissions, and out-of-range values., • Support program forecasting, production tracking, and goal attainment analysis. CRM & Data Management • Maintain and reconcile project information across multiple CRM and data management platforms., • Execute data queries and generate reports to support program performance monitoring., • Identify and resolve cross-system discrepancies to ensure accurate and consistent program records., • Document data collection, quality control, and tracking procedures. Technical & Program Support • Research state and federal energy efficiency codes, regulations, and program requirements., • Evaluate energy efficiency measures using technical reference materials and program guidelines., • Support program evaluation activities and continuous improvement initiatives., • Review program documentation and provide quality assurance feedback., • Prepare reports, presentations, and recommendations for internal stakeholders and utility clients., • Collaborate with program managers and client teams to fulfill reporting and information requests. Who you are: Required Qualifications • Bachelor's degree in Mechanical Engineering, Energy Engineering, Environmental Engineering, or a related technical field., • Experience analyzing large datasets and translating findings into actionable insights., • Advanced Microsoft Excel skills and strong proficiency with the Microsoft Office Suite., • Experience working with CRM platforms such as Salesforce, Microsoft Dynamics, or similar systems., • Knowledge of energy efficiency programs, building systems, and energy-saving technologies., • Strong analytical, organizational, and problem-solving abilities., • Excellent written, verbal, and interpersonal communication skills., • Ability to manage multiple priorities in a fast-paced environment., • Valid driver's license and reliable transportation for travel throughout New Jersey., • Must be a New Jersey resident. Preferred Qualifications • Experience supporting utility-sponsored energy efficiency programs., • Familiarity with the New Jersey Technical Resource Manual (TRM)., • Experience performing energy savings calculations, energy modeling, or utility rate analysis., • Experience with relational databases, SQL, Visual Basic, or similar programming languages., • Knowledge of state and federal energy efficiency policies and regulations., • Experience conducting commercial and industrial energy assessments or inspections., • Understanding of building science, HVAC, electrical, building envelope, and weatherization technologies. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Holidays: 11 Federal Holidays (88 Hours) observed in accordance with mcfa's Holiday Schedule "mcfa way" Bonus Program: • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Growth Unit allotment may increase over time. Healthcare & Insurance: • Eligible to participate in mcfa’s family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job Description About Alston Construction: Alston Construction Company is a nationwide general contractor, with more than 20 offices coast to coast. For 40 years, we have been a true partner, an honest advisor, as well as a responsible contractor for our clients. We believe the success of any project depends upon a strong builder client relationship, and a commitment to establishing common goals and objectives from the project start. Alston Construction offers a diverse background of general contracting, construction management and design-build experience of industrial, commercial, healthcare, education, retail and government projects. We look for passionate construction professionals who share our core values: commitment, integrity, teamwork, and respect. As our CEO, Paul Little, says “In order to be successful at Alston Construction, you must enjoy seeing success in others.” If this sounds like you and what you’re looking for, we’d love to hear from you! Our top tier benefits package includes medical, dental, vision, prescription safety glasses, short-term disability, long-term disability, life insurance/AD&D, HSA, health FSA, dependent daycare FSA, EAP, 401(k), Roth 401(k), After-Tax Roth In-Plan Conversion; paid vacation and sick time, paid holidays, tuition reimbursement, Tickets at Work, paid Identity Theft Protection (family coverage) and more! Job Title: Assistant Project Manager Job Summary: Leads, directs and coordinates the overall management of assigned projects. The overall goal of the Assistant Project Manager is to ensure the project is completed safely, on schedule, within budget, and which attains or exceeds profit goals, while promoting and enhancing client relationships and the company’s image. Essential Duties and Responsibilities will include: • Ensure the quality completion of projects on time and within the allocated budget., • Perform a qualitative review of all contract documents for potential conflicts or interpretation issues to mitigate risk, reviews design documents for compliance to specifications and contract, subcontract documents for scope completeness, and all project plans, scopes, submittals and shop drawings for specification compliance and design/constructability issues., • Ensure proper document control and record keeping, submit close-out documents, including as-built drawing., • Work with Superintendent to facilitate the project construction process and coordinate staff activities to assure achievement of goals regarding project budget, schedule, safety standards, and quality control/assurance standards., • Create, maintain and monitor a detailed master project schedule, incorporating actual task start and finish dates and provide timely and accurate reports to determine if work is in accordance with the requirements of the contract, is on schedule and within budget., • Lead or participate in the response to Requests for Proposals (RFPs), working through site investigation and preliminary design., • Other related duties. Education, Experience, and Licensing/Certifications include: • Degree in Construction Management, Engineering or related field and appropriate experience successfully managing construction projects for a general contractor from conception to completion. An equivalent combination of education and experience will be considered., • Design-build experience on relevant project types., • Valid driver’s license with satisfactory driving record. Salary Range: $75,000 – $115,000 annually, depending on experience and qualifications. Alston Construction is an Equal Opportunity Employer.

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. We are consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are seeking an experienced Senior Lead Energy Engineer to join our team in Woodbridge, N.J. The ideal candidate will be responsible for leading projects from auditing through implementation. They will come with 7+ years of relevant experience and strong technical competence. Essential Job Functions • Lead and execute ASHRAE Level I–III energy audits., • Conduct on‑site inspections, data collection, and measurement & verification., • Develop detailed engineering analyses and ECM calculations., • Provide design support and review technical drawings., • Coordinate project activities with clients and contractors., • Prepare technical reports, proposals, and documentation., • Mentor junior engineers. Qualifications • Bachelor’s or Master’s degree in relevant engineering field., • Minimum 5 years of experience., • Certified Energy Manager (CEM) is required., • Must reside in New Jersey., • Valid NJ driver's license., • Strong knowledge of building mechanical, electrical and controls’ systems and energy codes. Physical Demands of the Job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more, including 401(k) and employer match. Compensation • Salary Range: $115,000-$130,000/annual (Commensurate with experience).

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Newark, NJ, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required., • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Controls Engineer Reports To The controls engineer reports to the chief engineer. Job Overview The controls engineer supports the maintenance department by leading preventative maintenance, improvements, and repairs in automation systems and electrical controls while also assisting with department management. Responsibilities and Duties Maintain automation systems including PLC’s, HMI’s, inverters, servos, robotics, network components, and computers. Troubleshooting of all controls issues as well as assisting maintenance in troubleshooting other issues using PLC’s. Make changes to controls programs as needed to improve the system or to fix issues. Assist in the startup of new equipment, including IP addressing, acquiring all programs, and verifying the ability to connect and manage the new equipment. Maintain backups and change logs for all backups. Report any changes made to the program review group. Facilitate training mechanics to handle basic electrical troubleshooting and component replacements. Support engineering staff as needed with department management. Assist in any breakdowns and floor calls as needed. Must be on call off hours for trouble shooting from remote and on-site as necessary. Coverage for the assistant engineer and/or chief engineer in their absence. Must be willing and able to work different shifts, weekends, and holidays as needed. Qualifications High school diploma or equivalent. Minimum of 2 years experience in automation controls in an industrial operation. Food manufacturing experience is a plus but not required. Must be fluent with Allen Bradley systems including SLC and Logix PLC platforms, Panelview HMI’s, PowerFlex inverters, Kinetix servo amplifiers, etc. Ability to read and update electrical schematics. Ability to troubleshoot electrical systems as well as wire in new components. An understanding of Ethernet networking is required. PC setup and trouble shooting abilities are needed. Must be very confident with office software, especially spreadsheets. Must poses strong leadership skills. Understanding of the mechanical systems is crucial to success in this role

Job Description Job Title: Facility Engineer Location: South Plainfield, NJ Type: Direct-Hire Compensation: 90K to 140K/Annual Work Model: Onsite Hours: Monday through Friday (9AM to 5PM) Summary Responsible for facility operations, preventive maintenance, troubleshooting, utility monitoring, contractor coordination, and facility improvement projects. The Facility Engineer will work closely with local cross-functional teams, external service providers, and headquarters to minimize downtime, maintain compliance, and support production and facility expansion. Key Responsibilities Facility Operations & Maintenance • Perform and coordinate routine inspections, preventive maintenance, corrective maintenance, and troubleshooting for facility equipment and utility systems., • Maintain PM schedules, service records, inspection logs, and equipment history., • Monitor facility equipment and utility performance and address abnormal conditions before they impact production., • Coordinate maintenance activities, spare parts, and vendor services to minimize operational downtime. Critical Facility Systems Provide engineering and operational support for: • Cleanroom HVAC, temperature, humidity, pressure, and filtration systems;, • CDA, nitrogen, vacuum, DI/RO water, exhaust, and ventilation systems;, • Electrical distribution, UPS, emergency power, and fire/life-safety systems;, • Pumps, compressors, chillers, cooling systems, and other supporting mechanical utilities. Troubleshooting & Manufacturing Support • Respond to facility alarms, equipment failures, utility interruptions, and other production-impacting incidents., • Perform first-level troubleshooting, coordinate vendors for complex repairs, and support root-cause analysis and corrective actions., • Maintain facility conditions required for cleanroom and manufacturing operations., • Support cleanroom certification, environmental monitoring, equipment installation, hook-up, production line changes, and facility recovery activities. Facility Projects & Continuous Improvement • Support facility upgrades, renovations, utility expansion, energy-saving initiatives, and production expansion projects., • Review drawings, layouts, equipment specifications, scopes of work, and vendor quotations., • Coordinate contractors and service providers and track project schedules, action items, commissioning, and final handover., • Identify opportunities to improve facility reliability, safety, maintainability, and operating cost. Safety, Compliance & Contractor Management • Coordinate contractor access, work permits, site activities, and service quality., • Ensure maintenance and construction activities comply with company EHS requirements and applicable codes., • Support facility inspections, audits, corrective actions, and required documentation., • Maintain facility drawings, manuals, procedures, service reports, and compliance records. Reporting & Cross-Functional / Headquarters Coordination • Provide regular updates on facility status, maintenance activities, open issues, and project progress., • Coordinate with Production, Equipment Engineering, EHS, Quality, IT, and other internal functions., • Communicate and coordinate with headquarters in Mandarin and English regarding facility engineering, utility requirements, equipment installation, production expansion, project status, and technical issues., • Support vendor quotations, purchase requests, budgets, and service contract management as assigned. Qualifications Basic Requirements • Bachelor’s degree or above in Mechanical Engineering, Electrical Engineering, HVAC, Facility Engineering, Industrial Engineering, or a related field., • 3+ years of experience in facility engineering, industrial maintenance, cleanroom operations, manufacturing utilities, or related facility projects., • Working knowledge of HVAC, cleanroom systems, mechanical utilities, electrical distribution, and industrial facility systems., • Hands-on troubleshooting capability and ability to coordinate maintenance and repair activities., • Ability to read engineering drawings, P&IDs, equipment layouts, and utility schematics., • Strong communication, organization, follow-up, and problem-solving skills. Language Requirements • English proficiency and Mandarin proficiency are required Preferred Qualifications • Experience in optical module, photonics, semiconductor, electronics, or other high-tech manufacturing environments., • Experience with cleanroom facilities and CDA, nitrogen, vacuum, DI water, exhaust, HVAC, and electrical systems., • Experience with CMMS / preventive maintenance systems., • Experience supporting factory startup, production expansion, or facility upgrade projects., • Familiarity with OSHA, NFPA, building/fire codes, and manufacturing EHS requirements. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national original, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Process EngineerPosition Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 1st shift (7AM – 3PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products.This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery.The Process Engineer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities:Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution.Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone).Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness.Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput.Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff.Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control.Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning.Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas.Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities:Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed.Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate.Other miscellaneous duties as assigned. Qualifications:Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field).A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations).Proven experience in yield improvement, root cause analysis, and process troubleshooting.Familiarity with NPI processes, including process validation and production readiness.Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies.Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP).Excellent communication and collaboration skills across shifts and cross-functional teams.Willingness to work on the afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed.Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device).Six Sigma Green Belt or Lean certification.Hands-on experience with automation systems, sensors, or high-throughput equipment. Physical requirements and work environment:Must be able to lift 20 lbs;Must be able to sustain office work for 8+ hours per day including the following:Sitting in an office chairTypingReaching for the telephoneStanding at office equipmentHearing for phone useSight for computer useMust be able to sustain factory work as needed including the following:Standing at machineryReaching and pulling to operate machinerySight for machinery operationWalking through shopOffice environment is of moderate noise level.Shop noise levels are such that protective ear-coverings are recommended. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement.Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Senior Procurement Buyer – Whitehall, MI | Full Relocation Package Offered Relocate to West Michigan's Lakeshore — Beaches, Small-Town Life, and Room to Grow Imagine trading your commute for Lake Michigan sunsets, sandy beaches, and a tight-knit lakeshore community, with Grand Rapids' restaurants, breweries, and big-city amenities just a short drive away. This West Michigan lakeshore region offers an exceptional quality of life at a low cost of living, with year-round outdoor recreation right out your back door and a genuine small-town feel that's increasingly hard to find. It's the kind of place people move to and don't leave. The company provides full relocation assistance, with candidates able to begin the role remotely for 30-60 days while relocation logistics are finalized. The company we represent is a well-known global provider of advanced engineered solutions. As a publicly traded entity, it has built an impressive 75-year legacy marked by continuous growth and innovation. Widely respected, this company is known for its outstanding corporate culture that encourages personal development and offers a wide array of opportunities. Forbes has recognized it as one of the top employers globally, emphasizing its dedication to excellence and diversity. With over $7 billion in revenue, this company continues to thrive in its industry. What Sets This Opportunity Apart • Comprehensive benefits starting Day 1, including medical, dental, vision, and more, • 9% 401(k) dollar-for-dollar match with employer contributions to your Retirement Savings Plan each pay period, • Robust training programs and a collaborative culture focused on continuous learning and development, • Free on-site fitness center membership to support your well-being Position Summary Our client, a global manufacturing organization, is seeking a Senior Procurement Buyer to join its plant-level procurement team. Reporting to the Plant Procurement Lead, this role supports both strategic and operational procurement activities, including cost savings initiatives, supplier performance management, transactional execution, and cross-functional collaboration in a fast-paced plant environment. What You'll Do • Support benchmarking, should-be-cost analysis, and business case development, • Assist in planning and monitoring supplier performance, including ASAT and related compliance activities, • Develop and maintain tools and templates to streamline team communication and procurement execution, • Communicate with suppliers on operational topics; support negotiations and RFQ/RFP processes alongside Strategic Buyers, • Participate in supplier meetings and liaise with Financial Shared Services to resolve purchase-to-pay issues, • Support buyer/planners and operations staff in executing purchase orders, resolving AP issues, and supplier communications, • Interface with Shipping, Operations, Supply Chain, Engineering, and Quality to resolve cross-functional issues, • Ensure adherence to global procedures, quality standards, and departmental policies, • Resolve issues related to direct materials, services, raw material quality, quantity verification, and delivery to support production demands What You Bring • Bachelor's degree in Business Administration, Economics, Supply Chain, or a related field, • 5-10 years of prior procurement experience, ideally with purchase-to-pay exposure, preferred, • Technical understanding of manufacturing or industrial environments preferred, • Strong communication, negotiation, and relationship-building skills; comfortable working directly with suppliers and cross-functional teams, • Data-oriented, organized, and able to manage competing priorities and deadlines, • High integrity, with a proactive, solutions-focused mindset, • Oracle experience a plus, • Must be legally authorized to work in the U.S. (no visa sponsorship) About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring.

Job Description Senior Procurement Buyer – Whitehall, MI | Full Relocation Package Offered Relocate to West Michigan's Lakeshore — Beaches, Small-Town Life, and Room to Grow Imagine trading your commute for Lake Michigan sunsets, sandy beaches, and a tight-knit lakeshore community, with Grand Rapids' restaurants, breweries, and big-city amenities just a short drive away. This West Michigan lakeshore region offers an exceptional quality of life at a low cost of living, with year-round outdoor recreation right out your back door and a genuine small-town feel that's increasingly hard to find. It's the kind of place people move to and don't leave. The company provides full relocation assistance, with candidates able to begin the role remotely for 30-60 days while relocation logistics are finalized. The company we represent is a well-known global provider of advanced engineered solutions. As a publicly traded entity, it has built an impressive 75-year legacy marked by continuous growth and innovation. Widely respected, this company is known for its outstanding corporate culture that encourages personal development and offers a wide array of opportunities. Forbes has recognized it as one of the top employers globally, emphasizing its dedication to excellence and diversity. With over $7 billion in revenue, this company continues to thrive in its industry. What Sets This Opportunity Apart • Comprehensive benefits starting Day 1, including medical, dental, vision, and more, • 9% 401(k) dollar-for-dollar match with employer contributions to your Retirement Savings Plan each pay period, • Robust training programs and a collaborative culture focused on continuous learning and development, • Free on-site fitness center membership to support your well-being Position Summary Our client, a global manufacturing organization, is seeking a Senior Procurement Buyer to join its plant-level procurement team. Reporting to the Plant Procurement Lead, this role supports both strategic and operational procurement activities, including cost savings initiatives, supplier performance management, transactional execution, and cross-functional collaboration in a fast-paced plant environment. What You'll Do • Support benchmarking, should-be-cost analysis, and business case development, • Assist in planning and monitoring supplier performance, including ASAT and related compliance activities, • Develop and maintain tools and templates to streamline team communication and procurement execution, • Communicate with suppliers on operational topics; support negotiations and RFQ/RFP processes alongside Strategic Buyers, • Participate in supplier meetings and liaise with Financial Shared Services to resolve purchase-to-pay issues, • Support buyer/planners and operations staff in executing purchase orders, resolving AP issues, and supplier communications, • Interface with Shipping, Operations, Supply Chain, Engineering, and Quality to resolve cross-functional issues, • Ensure adherence to global procedures, quality standards, and departmental policies, • Resolve issues related to direct materials, services, raw material quality, quantity verification, and delivery to support production demands What You Bring • Bachelor's degree in Business Administration, Economics, Supply Chain, or a related field, • 5-10 years of prior procurement experience, ideally with purchase-to-pay exposure, preferred, • Technical understanding of manufacturing or industrial environments preferred, • Strong communication, negotiation, and relationship-building skills; comfortable working directly with suppliers and cross-functional teams, • Data-oriented, organized, and able to manage competing priorities and deadlines, • High integrity, with a proactive, solutions-focused mindset, • Oracle experience a plus, • Must be legally authorized to work in the U.S. (no visa sponsorship) About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Position Summary This role is for someone who wants more than a job. Were building something real - a portfolio of residential, commercial, and industrial projects across New Jersey - and were looking for a Civil Engineer who wants to be a core part of that story. The right candidate thrives when no two days look the same, takes pride in watching their work go from napkin sketch to ribbon cutting, and wants to work in an environment where growth is expected, not optional. This team moves fast and operates across multiple asset classes on genuinely complex projects. The manager leading this group has deep field experience and is hands-on - expect real collaboration, direct feedback, and active investment in your development. The best engineers here dont just execute; they contribute ideas, challenge assumptions, and make the work better. Thats the standard we hold ourselves to. Key Responsibilities Engineering Responsibilities Technical Contributions Accountable and responsible for quality and quantity of drawings, including signing and sealing work product. Lead civil engineering efforts for site design, grading, utilities, and land development across active project assignments. Own project phases from concept through construction documentation, executing with accuracy and a constructability mindset. Mentor and support junior engineering staff, sharing technical knowledge and setting the tone for a high-performing team environment. Uphold and contribute to the firms engineering standards and workflows in alignment with ownership expectations and industry best practices. Track progress on assigned tasks and communicate status updates to project leads in a timely, organized manner. Project Oversight Collaborate with development, entitlements, construction, and operational teams to ensure engineering designs support project feasibility, budget, schedule, and operational goals. Manage assigned project tasks and costs to support profitability and efficiency across civil engineering engagements. Drive engineering work across multiple simultaneous projects, from master planning and site layout to grading, utilities, and permitting. Ensure compliance with all regulatory codes, municipal zoning ordinances, NJ Residential Site Improvement Standards (RSIS), and agency requirements. Prepare and lead production of concept drawings, drainage reports, sanitary sewer reports, and site investigation reports. Support construction phase services, including review of shop drawings and submittals. Cross-Functional Collaboration Work across development, entitlements, construction, architecture, and other teams to ensure engineering solutions are integrated effectively across all disciplines. Coordinate with municipal agencies, contractors, and project leads to advance approvals and permitting. Partner with architectural and interior design teams so civil engineering design supports the full project vision from site through building. Consultant Vendor Management Coordinate with external civil engineers, surveyors, geotechnical consultants, and other technical specialists. Review civil engineering deliverables, drawings, and specifications at key project milestones. Manage engineering budgets and track consultant deliverables to maintain schedule and cost efficiency. Qualifications Bachelor's degree in Civil Engineering; advanced degree a plus. Minimum 5-10 years of commercial and/or high-density residential site design and permitting experience. Licensed Professional Engineer (PE) in New Jersey preferred; EIT with active pursuit of PE licensure considered. Deep understanding of jurisdictional requirements and municipal land development ordinances. Strong knowledge of NJ Residential Site Improvement Standards (RSIS). Expertise in civil engineering design including site layout, grading, earthwork analysis, ADA compliance, stormwater management, sanitary sewer, water distribution, and soil erosion sediment control. Construction and constructability expertise as it relates to production of design drawings and resolution of field issues. Foundation and geotechnical experience and understanding. Proficiency in AutoCAD Civil 3D and drainage software (StormCAD, Hydroflow, HydroCAD). Proficiency in Microsoft Office Suite including Excel, Word, Outlook, and Microsoft Project. Self-starter with the ability to work both independently and collaboratively within a multidisciplinary team. Strong organizational, written, and verbal communication skills. Experience working alongside consultant teams and supporting coordination of professional services. \nCompany Description Protouch Staffing is a trusted staffing partner specializing in connecting skilled professionals with top employers. While we originally focused on healthcare staffing, we’ve expanded into legal and other domains to meet evolving workforce needs across industries. Protouch Staffing is a trusted staffing partner specializing in connecting skilled professionals with top employers. While we originally focused on healthcare staffing, we’ve expanded into legal and other domains to meet evolving workforce needs across industries.

Job Description Title: Vice President, Quality, Compliance & Facilities FLSA: Exempt Position Overview: This role provides senior leadership and ownership of the functions that safeguard product integrity and the operating environment: Quality, Compliance (Quality Control, Quality Assurance, Safety and regulatory conformance), Security, and Facilities. The position is accountable for ensuring that products consistently meet quality specifications, that operations remain fully compliant with regulatory and safety standards, that the site and its products are secure, and that facilities are maintained to support a reliable 24/7 manufacturing environment. The role establishes clear metrics and ownership across these areas and reports performance to senior leadership. Key Responsibilities: • Quality: Establish and maintain quality control protocols for raw materials, components, and finished products. Design inspection and testing processes and provide guidance on maintaining consistent quality from the beginning of production through final release. Lead Quality Assurance and Quality Control teams, monitor quality metrics, and drive corrective and preventive actions (CAPA) to eliminate root causes of defects. Ensure conformance to customer, product, and industry specifications., • Compliance: Ensure full compliance of operations with ISO 9001, ISO 14001, and applicable safety standards in accordance with New Jersey law. Own audits, certifications, and documentation, and serve as the primary liaison with regulatory bodies, auditors, and customers on compliance matters. Identify potential risks and pitfalls (e.g., equipment failures or other disruptions) and develop strategies to mitigate these issues through process improvement, alternative suppliers of materials, or altered equipment., • Security: Oversee physical and product security programs consistent with the company's trust and authentication mission. Establish and enforce protocols to protect raw materials, work-in-process, finished goods, and sensitive assets throughout the facility and supply chain. Ensure operations meet payment-industry and customer security requirements, and manage security personnel and access controls across all shifts., • Accountability: Own the key performance indicators and reporting for quality, compliance, security, and facilities. Establish clear ownership, metrics, and dashboards, report performance to senior management, and foster a culture of accountability across the organization. Manage a team of approximately 35 people across 7 shifts supporting QA, Safety & Security., • Facilities: Oversee facility operations, maintenance, and environmental health and safety of the buildings, grounds, and utilities. Ensure facilities are maintained to support a reliable 24/7 manufacturing environment, manage facility vendors and contractors, and lead facility-related capital projects, space planning, and safe-workplace initiatives. Skills & Qualifications • Bachelor's or Master's degree in Engineering, Quality, Operations Management, or a related field., • A minimum of 10–15 years (or more) of relevant experience in quality, compliance, and/or operations leadership in a high-volume manufacturing environment (Pharmaceutical, Semiconductor, Automotive, or secure/payment products) , with at least 5-10 years experience in managing teams across multiple shift in a 24/7 environment :, • Deep knowledge of quality management systems (ISO 9001, IATF 16949 for automotive, AS9100 for aerospace, etc.), • Six Sigma / Lean methodologies (typically Black Belt or Master Black Belt level), • Root cause analysis and CAPA (corrective and preventive action) processes, • Statistical process control (SPC) and data-driven decision making, • Supplier quality management and audit experience, • Very strong analytical skill set, including familiarity with quality and reliability tools (e.g., FMEA, SPC, Kaizen)., • Regulatory fluency:, • OSHA, EPA, ISO 14001 (environmental), ISO 45001 (occupational health & safety), • Industrial hygiene and risk assessment methodologies, • Environmental compliance (emissions, waste management, hazmat handling), • Process safety management, • Incident investigation and workers' compensation/claims oversight, • Demonstrated experience working with cross-functional teams required., • Demonstrated experience in third party audits ( ISO , PCI, ....), • Occasional travel to suppliers and partners. Preferred Skills and Qualifications: • Quality certifications such as Black belt Six Sigma, • GHG Management, • Familiarity with ERP tools, • Experience in a secure payment, or otherwise highly regulated manufacturing environment. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job DescriptionJob Title: Electro-Mechanical Maintenance TechnicianJob Description We are seeking a skilled Electro-Mechanical Maintenance Technician with over 5 years of experience in industrial maintenance or electro-mechanics. The ideal candidate will possess strong knowledge of PLCs, VFDs, and industrial controls, with the ability to work independently and troubleshoot under pressure. Experience in a food manufacturing environment is preferred, along with familiarity with CMMS systems and Microsoft Office. A willingness to work overtime, weekends, and holidays is required. Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use diagnostic tools such as multimeters and oscilloscopes., • Follow SOPs and maintain clean, safe workspaces., • Ensure compliance with GMP, HACCP, and OSHA standards., • Understand food safety protocols and hygiene standards.Essential Skills, • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to read and interpret electrical schematics and wiring diagrams., • Experience with industrial sensors and troubleshooting., • Proficiency in working with mechanical systems like conveyors and pumps., • Understanding of hydraulic and pneumatic systems., • Knowledge of GMP, HACCP, and OSHA standards., • Ability to follow SOPs and maintain clean, safe workspaces.Additional Skills & Qualifications, • Associates degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience may be accepted., • 35 years of experience in manufacturing or food production environment., • Prior work with automated or robotic systems is a major plus., • Familiarity with CMMS systems like MP2 or SAP.Why Work Here? Enjoy a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including Medical, Dental, Vision, Life Insurance, and 401(k). We offer paid time off and career development opportunities in a fast-paced, team-oriented environment with global impact. Work Environment The work schedule is from 7am to 3pm, with a requirement to lift 50+ lbs, stand for long periods, and work in varying temperature conditions. Strong problem-solving and communication skills are essential, as is the flexibility to work overnight shifts, weekends, and respond to emergency calls. A team-oriented mindset is crucial to support cross-functional tasks. Job Type & Location This is a Contract to Hire position based out of New Brunswick, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New Brunswick,NJ. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description JOB SUMMARY:This position is responsible for troubleshooting and performing major mechanical repairs with minimal supervision to ensure proper performance of equipment on site, including motors and refrigeration rooms to maximize up time. Training of staff as required and coordinating with other mechanics on duty for repairs and ensuring all assigned work is timely completed.ESSENTIAL RESPONSIBILITIESACCOUNTABILITIES:Troubleshoot and repair industrial production equipment, electrical systems, and mechanical components.Diagnose equipment failures using electrical schematics, technical manuals, PLC diagnostics, and testing equipment.Perform preventive, predictive, and corrective maintenance on manufacturing equipment.Troubleshoot PLC-controlled systems, sensors, motors, VFDs, and industrial controls.Install, maintain, and replace electrical components including:3-phase motorsVFDs (Variable Frequency Drives)Motor startersPower suppliesRelays and contactorsProximity sensors and photo eyesRead and interpret electrical schematics, wiring diagrams, blueprints, and OEM documentation.Troubleshoot pneumatic and hydraulic systems.Maintain conveyor systems, packaging equipment, and automated production machinery.Complete work orders and maintenance documentation through the CMMS system.Coordinate repairs with production and maintenance teams to minimize downtime.Communicate with equipment manufacturers and vendors as needed for technical support.Follow all OSHA, food safety, GMP, and company safety requirements.QUALIFICATIONS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to measure size and dimension by means of calipers and to interpret bar graphs.Proficient in electrical installations, maintenance and repair in all settings.Must be able to operate industrial forklifts, equipment or tools.EDUCATION/EXPERIENCE:RequiredMinimum 5 years of Electro-Mechanical Maintenance experience in an industrial manufacturing environment.Strong troubleshooting experience with:PLC-controlled equipmentIndustrial electrical systemsPneumatics and hydraulicsMotors and motor controlsVFDs and industrial automationExperience working with 24VDC, 120V, 240V, and 480V electrical systems.Ability to read and interpret electrical schematics and technical drawings.Experience using electrical testing equipment such as multimeters and diagnostic tools.Ability to work independently with minimal supervision.Strong root-cause analysis and problem-solving skills.PreferredExperience with Allen Bradley PLCs, RSLogix, or Studio 5000.Associate's or Bachelor's degree in Electro-Mechanical Engineering, Electrical Engineering, Mechatronics, Industrial Automation, Electronics Engineering, or related technical field.Food manufacturing, bakery, packaging, beverage, or pharmaceutical manufacturing experience.Experience with CMMS systems.Associate's degree or technical certification in Electrical, Electronics, Mechatronics, Industrial Maintenance, or related field.

Job Description Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Outside Sales Representative to join our team in Woodbridge, NJ. In this role, you will be the face of our energy efficiency programs, actively engaging with customers, contractors, and industry leaders. To succeed, you will need a passion for energy conservation, strong communication skills, and a knack for building relationships. Your ability to craft compelling value propositions and implement effective sales strategies will be crucial in driving program participation and raising awareness. Essential Job Functions • Implement a pre-established sales strategy to promote the company brand and message., • Research and target potential clients who could benefit from energy efficiency solutions., • Initiate contact through cold calls, emails, street sweeps, and networking events., • Clearly explain the benefits of energy savings, utility incentives, and on-bill repayment options., • Build and nurture long-term relationships with clients to ensure repeat business and referrals., • Prepare and present tailored proposals that meet the specific needs of each client., • Keep up to date with the latest developments in energy efficiency technologies and utility incentive programs., • Educate new and existing clients on new opportunities for energy savings and financial incentives., • Track and report on sales activities, progress, and results for management., • Use CRM tools to manage customer information and sales pipeline., • Represent the company at industry trade shows, seminars, and other events to generate leads and network with potential clients., • Work closely with marketing, technical, and internal teams to ensure seamless customer experience, • Provide feedback to improve products and services based on customer interactions. Qualifications • Bachelor’s degree in sustainability, business, marketing, engineering, or a related field., • Over 3 years of experience in outside sales within the energy efficiency sector or a related field., • Must reside in New Jersey., • Possession of a valid US driver’s license., • Proficiency in CRM software, Microsoft Office Suite, Excel, Word, PowerPoint, and Outlook., • A demonstrated interest in energy conservation is essential., • Familiarity with lighting components, HVAC equipment, HVAC systems, lighting control systems, and building envelope components., • Ability to maintain and operate personal or company vehicles with a valid driver’s license., • Willingness and ability to travel within the Tri-State area, with some overnight travel required., • Strong customer service skills, with a focus on proactively identifying customer needs and managing expectations., • Excellent written and verbal communication skills., • Self-motivated individual capable of working independently and/or as part of a team., • Exceptional organizational, time-management, and planning abilities. Knowledge, Skills and Abilities • Capable of engaging customers, industry stakeholders, through phone calls, emails, and both virtual and in-person meetings., • Team-oriented, hands-on, highly skilled, adaptable, and client-focused., • Contacts in the construction market include builders, developers, architects, engineers, etc., • Experience in evaluating the effectiveness of sales strategies and proposing alternatives., • Excellent public speaking and written communication skills., • Experience in developing and editing professional presentations., • Proficiency in tracking goals and accurately forecasting pipeline progress., • Understanding of how to effectively engage multiple decision-making levels within a company across different target audiences., • Experience working with professional organizations and market decision makers., • Experience with energy efficiency evaluations or audits at commercial or industrial sites., • Strong understanding of market trends, customer needs, and industry-specific best practices (e.g., lighting, construction, sustainability). Physical Demands of the Job • The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully., • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of marketing materials. Work Environment • The employee is subject to both inside and outside environmental conditions. Diversity Tri State Energy, Inc. is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more., • 401(k) with company match., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Holidays., • Opportunities for advancement and development. Work Schedule Monday through Friday, 8:00 a.m. to 5:00 p.m., though some supervisory work will occur on 2nd or 3rd shift. • 40-hour work week., • Occasional weekends., • On-call requirement., • Some travel is required, as needed. This is a salary based exempt position with commission-based incentive plan. It is a salary base of $70,000/per year plus commission.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Systems Engineer, based in Somerset, NJ, is a multifaceted role requiring an in-depth understanding of BEUMER sortation products and applications. This position is responsible for analyzing customer requirements, developing innovative solutions, estimating costs, overseeing the development of layouts using 2D and 3D CAD and delivering customer proposals. Additionally, the Systems Engineer acting in the capacity of subject matter expert, collaborates with Sales, Engineering, and Software/Controls to ensure the successful design of solutions that address customer requirements. The Systems Engineer is also responsible for participating in and leading client meetings, calls and workshops serving in the capacity of a technical expert. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER's Logistics products, solutions and applications., • Lead and engage in initiatives that require expertise to address customer requirements through innovative solutions., • Stay up to date on industry trends, best practices, and emerging technologies in logistic systems and supply chain management. Requirements Analysis and Solution Development: • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Develop innovative solutions using 2D and 3D CAD., • Customize and configure products to meet customer-specific requirements, including developing prototypes, conducting feasibility studies, and performing testing and validation. Collaboration: • Collaborate with Sales, Engineering, and Software/Controls departments to design and develop effective system solutions., • Serve as the primary point of contact (acting as a subject matter expert) for customers, providing pre-sales and post-sales consulting on technical topics., • Collaborate with cross-functional teams including Software, Controls, Project Management, and Operations to ensure successful project implementation and delivery. Cost Estimation and Vendor Management: • Develop and estimate cost associated with system design and solutions., • Coordinate in developing RFPs and manage vendor responses to RFPs., • Act as single point of contact to clarify technical scope for internal and external teams. Technical Documentation: • Produce technical documents, including proposals, process flows, user manuals, and application notes, to support customers in the use and implementation of our products and solutions. Process Development: • Develop tools and assist in processes development as needed., • Understand, follow and implement BEUMER processes per BGMS Client Engagement: • Participate, lead and coordinate client meetings, workshops and calls as necessary., • Act as the subject matter expert providing technical support as and when required Sales Support: • Coordinate with Sales, Systems Engineering, Operations and Finance to handover orders., • Support sales team members with techno-commercial expertise as required. Compensation Range: $115,000.00 - $125,000.00 annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. #TalentPoweredByYou Qualifications Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 4-6 years of experience in systems engineering, technical sales or product engineering; preferably in convey and sortation solutions., • High motivation, drive and initiative to get things done with little to no supervision., • Team player and ability to work well with large team setups including internation cultures., • Strong time management, organization and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge., • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 15-20% on average. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws. prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment, and acknowledges BEUMER’S commitment to diversity and inclusion. All your information will be kept confidential according to EEO guidelines.

Job Description Federal Signal has an immediate opening for a Northeast Regional Sales Manager for our Work Truck Division. The successful incumbent will be responsible for increasing sales objectives within the territory, which will include OH, PA, WV, VA, DE, MD, MA, NY, NJ, ME, NH, VT, RI and CT. They will do so by leading sales efforts to develop new account opportunities and maintaining awareness of market trends and competition. The ideal candidate will preferably be based in Boston, Philadelphia or New York. Essential Job Duties and Responsibilities • Responsible for achievement of new business objectives and programs within assigned territory., • Develops sales funnel and forecast projections for new business through the use of the company CRM and Quoteworks Software., • Seeking out new market opportunities to incrementally grow product sales thru new customer achievement., • Maintains awareness and deals effectively with competitive market conditions that influence sales., • Identifies new business opportunities and develops strategy to win business with internal resources., • Maintain a high level of product knowledge including features, functions, and benefits in all relevant product groups to assist in the solicitation of orders, sales meetings, and service-oriented functions., • As applicable, provides sales direction and support to the manufacturer's rep and distributor sales team, • Responsible for territory product training, seminars, sales meetings, and trade shows., • Timely reporting of issues and expense reports to management., • Performs other duties as assigned. Position Requirements • Bachelor’s degree in Business, Engineering or related field or 5 or more years of sales experience in lieu of degree., • 3+ years sales experience in safety & security business or other relevant area., • Experience with Manufacturing Product Reps or Distributors., • Willing to travel at least 60%. Good organizational and project management skills., • Proficient in Word, Excel, Outlook and PowerPoint. Salary Range: Base of $85,000/yr - $95,000/yr PLUS competitive monthly commission plan Benefits of Employment In addition to excellent career growth opportunities, Federal Signal Corporation offers a wide array of benefits including: annual bonus potential, insurance (life, medical, dental, vision), paid holidays, paid vacation, 401(k) with matching contributions and tuition reimbursement. We provide our employees with a smoke-free, drug-free workplace. About Us Federal Signal in University Park is a leading manufacturer and supplier of comprehensive systems and products used to protect people and property. Our products and integrated solutions include systems for campus and community alerting, emergency vehicles, first responder interoperable communications, industrial communications, and command and municipal networked security. Specific products include: lightbars and sirens, public warning sirens and public safety software. Federal Signal Corporation (NYSE: FSS) builds and delivers equipment of unmatched quality that moves material, cleans infrastructure, and protects the communities where we work and live. Founded in 1901, Federal Signal is a leading global designer and manufacturer of products and total solutions that serve municipal, governmental, industrial and commercial customers. Headquartered in Downers Grove, IL, with manufacturing facilities worldwide, the Company operates two groups: Environmental Solutions and Safety and Security Systems. For more information on Federal Signal, visit: www.federalsignal.com The Company is an equal opportunity employer. Qualified applicants will not be discriminated against on the basis of, and will receive consideration for employment without regard to, race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, status as a protected veteran, or any other protected category, characteristic, or trait under applicable law. If you require reasonable accommodation in the application process, contact Human Resources at HR@federalsignal.com. All other applications must be submitted online.

Job Description At Weston Solutions, Inc. you will do meaningful work and make valuable contributions. Employee ownership at Weston is a path to professional growth and access to diverse opportunities in a highly connected community that works together across key service areas to make a difference in the environment. Weston has continued to evolve and adapt to our changing world as a premier provider of environmental and infrastructure services for over sixty years. In both the public and private sectors our teams help identify, solve, mitigate, and manage critical environmental issues to help clients achieve a more sustainable future. Weston is seeking an Air Quality Engineer (Licensed Professional Engineer). This role supports air quality engineering and compliance projects for industrial clients nationwide, with a focus on permitting, modeling, and regulatory compliance. The position requires that the applicant have a deep understanding of the regulatory landscape, be technically proficient in adhering to engineering standards, and be able to consistently deliver within project scope, schedule, and budget. Location: Edison, NJ Expected Outcomes: • Prepare and support air quality permitting in multiple states, including PSD, NNSR, Title V, synthetic minor, and true minor permits., • Perform emissions calculations, engineering analyses, and evaluations of control equipment performance and operating parameters., • Prepare modeling protocols for agency approval and conduct air dispersion modeling using AERMOD, CALPUFF, and screening tools., • Analyze and validate technical data, resolving discrepancies to produce accurate, review-ready results and reports, including stack test reports., • Maintain complete and accurate project documentation and deliverables within scope, schedule, and budget., • Communicate project progress, risks, and constraints proactively with internal teams and clients., • Deliver high-quality, compliant technical work products aligned with regulatory and client expectations., • Foster relationships between clients and regulatory agencies in multiple states., • Contribute to team performance and continuous improvement of air quality services., • Support environmental compliance across multiple media, including SPCC, stormwater, EPCRA Tier II/TRI, and hazardous waste., • Maintain confidentiality and adhere to all safety policies and OSHA requirements., • Stay current on environmental regulations, technologies, and industry best practices., • Support environmental compliance across multiple media, including SPCC, stormwater, EPCRA Tier II/TRI, and hazardous waste. Knowledge, Skills, and Abilities: • Licensed Professional Engineer (PE), preferred., • Bachelor’s degree in Chemical, Civil, or Environmental Engineering from an accredited university., • 8-15 years of experience in air quality permitting and environmental compliance., • Experience in preparing air permit applications, with Title V experience preferred., • Experience working with state and local air agencies, with multi-state experience preferred., • Strong understanding of air permitting regulations, emissions calculations, and control technologies., • Proficiency in air dispersion modeling tools such as AERMOD and CALPUFF is preferred., • Working knowledge of multi-media environmental compliance programs, including SPCC, stormwater, EPCRA Tier II/TRI, and hazardous waste., • Strong analytical, problem-solving, and organizational skills., • High attention to detail and commitment to technical accuracy., • Strong written and verbal communication skills., • Proficiency with Microsoft Office Suite., • Ability to work independently and collaboratively in a team environment, with the ability to support and mentor junior team members. We fully invest in our people: Weston provides a generous, comprehensive benefits package program that offers employees high value options with solid financial protection, meeting the personal needs of its people and their families. • Medical, Dental, Vision, 401K with base and matching employer stock contributions., • Paid time off includes personal, holiday and parental., • Life and disability plans., • Critical illness and accident plans., • Work/Life flexibility., • Professional development opportunities. Compensation will vary based upon experience, education, skill level, and other compensable factors.

Job Description Job Title: Switchgear Design Engineer (UL891) Job Location: Charleston, SC / North Charleston, SC In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: Salary: USD $105,000 – $140,000 Comprehensive benefits package Paid time off + 10 company holidays Tuition reimbursement 401(k) with strong employer contribution Stable, growth-oriented environment within a specialized engineering sector Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Switchgear Design Engineer (UL891) to design low voltage switchboards and panelboards. This role is based in the Charleston area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: Design low voltage switchboards and panelboards in compliance with applicable standards and regulations Create 3D sheet metal components and flat patterns Develop complex 3D assemblies with large multi-component BOMs Produce wiring diagrams including PLCs, relays, breakers, and power systems Generate 2D drawings including layouts, single-line diagrams, and front views Collaborate with engineering, manufacturing, and vendors to ensure accurate execution Translate client requirements into practical and efficient design solutions Qualifications:Required: Bachelor’s degree in Mechanical or Electrical Engineering (or related field) 4 - 8 years of professional experience (working for UL891 OEM or Equivalent) Strong proficiency in 2D and 3D CAD software (Autodesk preferred) Solid understanding of electrical systems and design principles Strong communication and collaboration skills Preferred: Experience with UL standards (UL891, UL67, UL508A, UL1558) Familiarity with the National Electrical Code (NEC) Experience sizing conductors and overcurrent protection devices (OCPDs) Knowledge of control circuits and electrical logic

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Support Engineer is a hands-on role that demands strong technical expertise, organizational abilities, and exceptional communication skills. This position leverages solid experience in electrical systems and controls to provide support to clients across North America, Mexico, and Central America. The Engineer is also responsible for coordinating and delivering hotline support services for both new and legacy customers, working closely with our European hotline teams to ensure seamless global service. This role offers significant opportunities for career growth and involves collaboration across various technical disciplines, including mechanical and electrical engineering, software development, project management, and customer support. The position may require ongoing training and on-site visits, with frequent travel primarily within North America, and occasional extended international travel as needed. Responsibilities • Ability to learn and understand electrical and control aspects of installed systems, • Access and troubleshooting of electro-mechanical components and systems, including PLC and PC communications., • Understanding system applications and how they translate into operational and functional requirements., • Effective, courteous communication with customers and provide technical expertise to guide and aid in issue resolution., • Investigate a root cause analysis or develop another corrective action in resolving issues., • Communicate and coordinate problem resolution actions with engineering, customer support, and other personnel to resolve issues., • Interpret maintenance manuals, schematics, wiring diagrams and other documentation., • Instructs and directs workers in servicing and repairing equipment., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance., • Understand electrical drawings and specifications as they relate to machine control programming., • Strong Customer communication skills., • Develop and implement strategies and standards for training, skills matrix, response and reporting., • Utilize best practices with our European hotline and technical groups,, • Utilize stage gate process in regard to hotline and new systems., • Utilize best practices of Service Now, as defined by Technical Team Leader, • May be assigned to special projects or required to perform other duties not listed above, which may vary from time to time as determined by management, to meet company needs. Compensation Range: $38.00 - $45.00 hourly The posted compensation range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Required Skills and Abilities • Associates or bachelor's degree in electrical or mechanical engineering, Engineering Technology, technical courses of study or other combinations of experience and training that meet the minimum requirements., • Strong time management and attention to detail, • Strong communication skills: verbal, written and interpersonal., • Ability to handle multiple tasks and work under pressure; sense of both urgency and thoroughness., • Professional, positive, and energetic attitude., • Self-motivated, trustworthy, respectful of others. Knowledge of: • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Strong understanding of industrial power, electrical and control circuits and devices., • Good understanding of networks and networking., • Demonstrated capability in PLC programming, with specific focus on SCO Unix, Linux, Siemens, and Allen Bradley based systems., • Ability to interpret schematics, diagrams and other documentation., • Understanding of C++ and Siemens S7 preferred. Ability to: • Attention to detail and the ability to learn quickly, • Works as part of the team, • Use computer-based tools for communication, trouble shooting, and programming., • To quickly acquire programming skills for machine control platforms., • Works remotely, while working independently. Desired Experience Demonstrated expertise of: • Sortation systems, i.e. Crisplant Legacy systems, etc., • Electrical and control troubleshoot, • PLC and PC based Programming #TalentPoweredByYou Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws. prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment, and acknowledges BEUMER’S commitment to diversity and inclusion. All your information will be kept confidential according to EEO guidelines.

Job DescriptionThe Role: Director of Building Envelope Location: Warren, NJ SUMMARY We are seeking a motivated Director of Building Envelope Project Engineer with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Estimated salary range for this position is $135,000 to $180,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Assist in troubleshooting construction issues with contractors based on engineering judgment Field Responsibilities • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Work on multiple field projects involving roofing, cladding, waterproofing, decks, balconies, and structural rehabilitation. Client Relations & Business Development • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach., • Represent The Falcon Group at technical seminars, networking events, continuing education sessions, and industry meetings. Supervisory Responsibilities This position currently has supervisory duties but may evolve based on growth and performance. Qualifications Licenses & Certifications • A Professional Engineering (PE) or a Registered Architect (RA) is needed., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Minimum of 10 years of experience with an engineering consulting firm, building envelope firm, structural engineering practice, or construction industry performing structural/envelope-related work. Education • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Master’s degree is a plus but not required. Skills & Additional Requirements • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus., • Familiarity with CSI MasterSpec or technical specification writing preferred.Physical Demands, • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain.Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job Description Woodard & Curran is an employee-owned engineering, science, and operations firm dedicated to clean water, a safe environment, healthy communities, and happy people. We foster an inclusive, collaborative culture that supports professional growth, flexibility, and meaningful work, empowering our employees to make a lasting impact on our clients, communities, and the planet. What You'll Be Doing at Woodard & Curran Are you looking to build a rewarding career in industrial wastewater operations? At Woodard & Curran, we're seeking a wastewater operator who is eager to learn, grow, and make an impact as part of a collaborative team. In this role, you'll work alongside experienced operators and maintenance professionals, gaining hands-on experience in the operation and maintenance of industrial wastewater treatment facilities. We value hard work, curiosity, and initiative, and we provide opportunities for career advancement based on performance and professional growth. This position is scheduled for 40 hours per week, working five 8-hour shifts, Sunday through Thursday, from 6:30 a.m. to 3:00 p.m. Because our facilities operate around the clock, flexibility to assist with weekend coverage, emergency response, and occasional off-hour needs is essential. What Will Help You Succeed We're looking for candidates who bring a combination of technical skills, mechanical aptitude, and a positive, team-oriented mindset. Preferred Qualifications & Experience • High school diploma or trade school certification required., • 2 to 4 years of experience operating or maintaining water and/or wastewater treatment facilities preferred. An equivalent combination of education, training, and experience will also be considered., • Strong mechanical aptitude and the ability to adapt to changing priorities and work environments., • Hands-on troubleshooting skills with the ability to identify, diagnose, and resolve equipment and system issues., • New Jersey Industrial Wastewater Treatment Plant Operator License (N) preferred, or the ability to obtain one through examination or reciprocity., • OSHA 40-hour HAZWOPER certification with current 8-hour refresher, if applicable. Skills & Abilities • Ability to regularly lift and carry up to 40 pounds., • Working knowledge of wastewater treatment operations, maintenance practices, equipment, and tools., • Commitment to safe work practices and an understanding of hazards associated with industrial wastewater treatment operations., • Ability to respond to emergency call-outs when needed., • Basic computer proficiency and comfort using workplace applications., • Ability to read and interpret technical drawings, specifications, procedures, and work instructions., • Strong verbal and written communication skills., • Positive attitude, strong work ethic, and a team-first approach. Additional Information As part of our hiring process, finalists will be required to successfully complete a background check, pre-employment physical, and drug screening. Compensation: $26.00 - $30.00/hr. based on level of experience and licensure. Why Join Woodard & Curran? At Woodard & Curran, you'll be part of a purpose-driven organization dedicated to protecting water resources and serving communities. We invest in our employees' growth and provide opportunities to develop new skills, advance your career, and contribute to meaningful work every day. Depending on qualifications and experience. Woodard & Curran offers a comprehensive benefits package. For more information about our benefits & workplace policies visit Benefit & Policy Information - Woodard & Curran. E-Verify Participation: Woodard & Curran participates in E-Verify to confirm the employment eligibility of all newly hired employees. As part of this process, we provide access to the Right to Work & E-Verify postings. Equal Employment Opportunity & Accessibility: Woodard & Curran is an Equal Opportunity Employer. We are committed to non-discrimination and make employment decisions based on job-related factors. Individuals with disabilities and protected veterans are encouraged to apply. If you require a reasonable accommodation during the application process, please contact Beth Sweitzer. Equal Employment Opportunity Policy Workplace Discrimination is Illegal Posting Woodard & Curran Terms of Use Woodard & Curran Privacy Statement Text Messaging: To support an efficient hiring process, we may send brief SMS updates or reminders. You may opt out at any time by replying “STOP.” Unsolicited agency submissions without a signed agreement are not eligible for referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Description: Oversee estimating team bidding mechanical HVAC & plumbing projects throughout New Jersey primarily in the hospital & pharmaceutical facilities Write accurate, competitive & detailed proposals and change orders Attend bid walks to evaluate scope and field conditions throughout the State of New Jersey Upon award of projects, work with project management team to turn over estimate for accurate procurement of equipment, materials, and subcontractors. Capabilities: Should include a strong background in estimating plan & spec, design/build & budgetary proposals & change orders. Help identify design challenges, code gaps, constructability issues, and value engineering opportunities. Evaluate scope changes and adapt quickly as project requirements evolve during the bidding process Knowledge of the mechanical contracting trade including commercial HVAC systems including RTU’s, chillers, cooling towers, boilers, pumps, heat exchangers, controls, crane picks and related equipment. Able to read and understand mechanical/plumbing plans, specifications, addendums, and drawing notes Must be able to perform quantity piping and sheet metal computerized takeoff to assemble detailed and accurate estimates for industrial HVAC piping, ductwork, plumbing & medical gas piping, and all equipment. Enter estimate data into bid software & spreadsheets for tracking and analysis Follow safety procedures and company policies when on job sites Analyzing vendor and subcontractor proposals for compliance with the specifications Establish and maintain strong relationships with vendors, subcontractors & clients Ability to work independently with high energy and self-reliance, make quick and accurate decisions, illicit the cooperation of others, work in fast paced, demanding business Ability to pass a background check & drug screening Skills: Familiarity with Fast Est or similar estimating software would be helpful. Microsoft office Attention to detail, strong organization & negotiation skills Manage multiple bids simultaneously while meeting deadlines Compensation & Benefits: Salary commensurate with experience 80-130k We are committed to providing employees a comprehensive benefits package which includes medical, dental, Group Life Insurance & Long-Term Disability Coverage, a 401(k) Savings Plan Mileage reimbursement Year-End Incentive Bonus Plan: based upon overall corporate performance, pro-rated for all first-year employees Vacation, PTO & paid holidays \nCompany Description Our work includes plumbing, piping, sheet metal and air conditioning service primarily in the hospital and pharmaceutical fields. Dress code is casual. Work pace is fast paced; atmosphere is friendly and supportive. Our work includes plumbing, piping, sheet metal and air conditioning service primarily in the hospital and pharmaceutical fields. Dress code is casual. Work pace is fast paced; atmosphere is friendly and supportive.

Job Description Location: New Jersey Employment Type: Full Time Department: Engineering Reports To: Vice President of Operations About Us SICAM has been accelerating customers' product development since 1990 with proven rapid prototyping, rapid tooling, and manufacturing solutions. We assist our customers in turning product ideas into shipments, from product concept to full manufacturing. SICAM provides multiple services to take 3D CAD designs and transform them into prototypes and finished products. We pride ourselves on precision, speed, and innovation. Position Overview We’re looking for a hands-on Additive Manufacturing Engineer to join our fast-paced production team. You’ll play a key role in managing client projects, optimizing print processes, and ensuring the highest standards of quality and efficiency. Key Responsibilities • Interpret customer CAD files and prepare them for additive manufacturing., • Select appropriate materials and technologies (SLS, SLA, FDM, MJF, etc.) based on project requirements., • Operate and maintain industrial 3D printers and post-processing equipment., • Troubleshoot print issues and optimize build parameters for quality and throughput., • Collaborate with sales and customer service teams to provide technical input and project feasibility assessments., • Ensure timely delivery of parts while maintaining strict quality standards., • Document workflows and contribute to continuous improvement initiatives. Qualifications • Bachelor’s degree in Mechanical Engineering, Manufacturing, Materials Science, or related field., • 2+ years of experience in additive manufacturing, preferably in a service or production environment., • Strong proficiency in CAD software (e.g., SolidWorks, Fusion 360)., • Familiarity with slicing software and build preparation tools (e.g., Magics)., • Excellent problem-solving skills and attention to detail., • Ability to manage multiple projects and meet tight deadlines. Preferred Skills • Experience with plastic AM technologies and post-processing., • Knowledge of ISO 9001 quality systems., • Customer-facing experience and strong communication skills. Why Work With Us? • Be part of a growing company at the forefront of digital manufacturing., • Work on diverse projects for top-tier clients., • Competitive salary and benefits., • Opportunities for career advancement and skill development. \nCompany Description We’re SICAM, a pioneering leader in the world of 3D printing and rapid prototyping. Dedicated to pushing the boundaries of manufacturing technology, providing innovative solutions that transform ideas into reality. At SICAM, we cater to a diverse range of industries including aerospace, automotive, medical, consumer goods, and beyond, offering cutting-edge materials and state-of-the-art technologies that redefine precision and performance. Why SICAM is a Great Place to Work: Innovation at Its Core: At SICAM, innovation isn't just a buzzword; it's our way of life. We are constantly exploring new technologies and materials to deliver groundbreaking solutions that keep us at the forefront of the industry. Cutting-Edge Technology: Working at SICAM means having access to the latest and most advanced 3D printing and rapid prototyping technologies. You'll have the opportunity to work on exciting projects that challenge and inspire you. Professional Growth: SICAM is committed to the professional development of our employees. We offer continuous learning opportunities, training programs, and career advancement paths to help you achieve your full potential. Customer-Centric Approach: Our clients are at the heart of everything we do. We build strong, long-lasting relationships by understanding their unique needs and delivering customized solutions that exceed expectations. Dynamic Work Environment: We pride ourselves on maintaining a dynamic and fast-paced work environment. Every day brings new challenges and opportunities to innovate, making SICAM an exciting place to grow your career. Commitment to Excellence: Quality is paramount at SICAM. We are dedicated to delivering top-notch products and services, ensuring that our clients receive nothing but the best. Join SICAM and be a part of a forward-thinking company that is revolutionizing the future of manufacturing. If you are passionate about technology, eager to make a difference, and ready to take your career to new heights, SICAM is the perfect place for you. Let's shape the future together! We’re SICAM, a pioneering leader in the world of 3D printing and rapid prototyping. Dedicated to pushing the boundaries of manufacturing technology, providing innovative solutions that transform ideas into reality. At SICAM, we cater to a diverse range of industries including aerospace, automotive, medical, consumer goods, and beyond, offering cutting-edge materials and state-of-the-art technologies that redefine precision and performance. \r\n\r\nWhy SICAM is a Great Place to Work: \r\n\r\nInnovation at Its Core: At SICAM, innovation isn't just a buzzword; it's our way of life. We are constantly exploring new technologies and materials to deliver groundbreaking solutions that keep us at the forefront of the industry. \r\n\r\nCutting-Edge Technology: Working at SICAM means having access to the latest and most advanced 3D printing and rapid prototyping technologies. You'll have the opportunity to work on exciting projects that challenge and inspire you. \r\n\r\nProfessional Growth: SICAM is committed to the professional development of our employees. We offer continuous learning opportunities, training programs, and career advancement paths to help you achieve your full potential. \r\n\r\nCustomer-Centric Approach: Our clients are at the heart of everything we do. We build strong, long-lasting relationships by understanding their unique needs and delivering customized solutions that exceed expectations. \r\n\r\nDynamic Work Environment: We pride ourselves on maintaining a dynamic and fast-paced work environment. Every day brings new challenges and opportunities to innovate, making SICAM an exciting place to grow your career. \r\n\r\nCommitment to Excellence: Quality is paramount at SICAM. We are dedicated to delivering top-notch products and services, ensuring that our clients receive nothing but the best. \r\n\r\nJoin SICAM and be a part of a forward-thinking company that is revolutionizing the future of manufacturing. If you are passionate about technology, eager to make a difference, and ready to take your career to new heights, SICAM is the perfect place for you. Let's shape the future together!

Job Description Location: New Brunswick, NJ (Hybrid) Job Type: Full-Time Eligibility: Must reside in New Jersey and be authorized to work in the United States About the Role We are seeking an analytical and detail-oriented Energy Engineer, Data Analytics & CRM to support the delivery of commercial and industrial energy efficiency programs throughout New Jersey. This position combines energy engineering expertise with advanced data analysis skills to ensure the quality, accuracy, and performance of energy efficiency program data. The ideal candidate is passionate about clean energy, enjoys working with large datasets, and has experience using CRM and reporting systems to drive data quality and program insights. In this role, you will collaborate with program managers, utility clients, and cross-functional teams to validate savings calculations, improve reporting processes, and support the successful implementation of energy efficiency programs. What You'll Do: Data Analysis & Quality Assurance • Analyze large datasets related to energy efficiency programs, projects, and portfolios., • Review project and measure-level data for completeness, accuracy, and compliance with program requirements., • Validate energy savings calculations against established technical methodologies and industry standards., • Identify and investigate data anomalies, outliers, and inconsistencies and implement corrective actions., • Develop, maintain, and analyze exception reports to proactively identify missing documentation, duplicate submissions, and out-of-range values., • Support program forecasting, production tracking, and goal attainment analysis. CRM & Data Management • Maintain and reconcile project information across multiple CRM and data management platforms., • Execute data queries and generate reports to support program performance monitoring., • Identify and resolve cross-system discrepancies to ensure accurate and consistent program records., • Document data collection, quality control, and tracking procedures. Technical & Program Support • Research state and federal energy efficiency codes, regulations, and program requirements., • Evaluate energy efficiency measures using technical reference materials and program guidelines., • Support program evaluation activities and continuous improvement initiatives., • Review program documentation and provide quality assurance feedback., • Prepare reports, presentations, and recommendations for internal stakeholders and utility clients., • Collaborate with program managers and client teams to fulfill reporting and information requests. Who you are: Required Qualifications • Bachelor's degree in Mechanical Engineering, Energy Engineering, Environmental Engineering, or a related technical field., • Experience analyzing large datasets and translating findings into actionable insights., • Advanced Microsoft Excel skills and strong proficiency with the Microsoft Office Suite., • Experience working with CRM platforms such as Salesforce, Microsoft Dynamics, or similar systems., • Knowledge of energy efficiency programs, building systems, and energy-saving technologies., • Strong analytical, organizational, and problem-solving abilities., • Excellent written, verbal, and interpersonal communication skills., • Ability to manage multiple priorities in a fast-paced environment., • Valid driver's license and reliable transportation for travel throughout New Jersey., • Must be a New Jersey resident. Preferred Qualifications • Experience supporting utility-sponsored energy efficiency programs., • Familiarity with the New Jersey Technical Resource Manual (TRM)., • Experience performing energy savings calculations, energy modeling, or utility rate analysis., • Experience with relational databases, SQL, Visual Basic, or similar programming languages., • Knowledge of state and federal energy efficiency policies and regulations., • Experience conducting commercial and industrial energy assessments or inspections., • Understanding of building science, HVAC, electrical, building envelope, and weatherization technologies. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Holidays: 11 Federal Holidays (88 Hours) observed in accordance with mcfa's Holiday Schedule "mcfa way" Bonus Program: • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Growth Unit allotment may increase over time. Healthcare & Insurance: • Eligible to participate in mcfa’s family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR \nCompany Description Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit. Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond cost—such as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelor’s degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Company Overview Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. We are seeking to hire an experienced Lead Energy Engineer in our Woodbridge, N.J. office, with 5+ years' experience in the energy sector, strong technical competency, and the ability to lead projects from auditing through implementation. Essential Job Functions • Lead and execute ASHRAE Level I-III energy audits., • Conduct onsite inspections, data collection and measurement and verification., • Develop detailed engineering analyses and ECM calculations., • Provide design support and review technical drawings., • Coordinate project activities with clients and contractors., • Prepare technical reports, proposals and documentations., • Mentor junior engineers for growth and development. Qualifications • Bachelors or Master's degree in relevant engineering field., • Certified Energy Manager (CEM) is required., • Strong knowledge of building mechanical, electrical, and controls systems and energy codes., • Must reside in New Jersey., • Valid New Jersey Driver's License is required., • PE desired or in progress. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. TSE is a drug-free workplace. Why work for us? • Medical, vision, dental insurance and more, including 401(k) and employer match.