Trabajos industrial engineering en White Plains, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Job Description 'We are seeking a skilled Machine Shop Foreman to oversee our manufacturing operations at our facility in the United States. This pivotal role involves managing production teams and ensuring the delivery of high-quality machinery that meets our company’s standards and customer expectations. Join us in shaping the future of industrial processing solutions. Responsibilities Supervise daily shop operations to ensure efficient production workflows. • Coordinate with engineering and quality control teams to maintain high standards., • Manage staff schedules, training, and performance evaluations., • Oversee maintenance of machinery and tools to minimize downtime., • Implement safety protocols in compliance with OSHA regulations., • Collaborate with procurement to ensure timely availability of materials., • Maintain accurate production records and report on operational metrics., • Drive continuous improvement initiatives within the shop environment., • Qualifications, • ', • Proven experience as a Shop Foreman or similar leadership role in manufacturing., • Strong knowledge of machining, fabrication or assembly processes and equipment., • Excellent management and team leadership skills., • Familiarity with OSHA safety standards., • Ability to read schematics and blueprints effectively., • Strong problem-solving skills and attention to detail., • Effective communication skills for coordinating with teams and vendors.' If you are ready to lead a dynamic team, at a growing company in a very attractive segment and market, we invite you to bring your expertise to American. Pay: From $70,000.00 per year Company DescriptionAs a leading manufacturer of vehicle wash systems in the heavy-duty vehicle and car wash industry, American Car Wash Solutions has the expertise and experience to guarantee both exceptional and environmentally sustainable results for your next stainless steel conveyorized car wash.As a leading manufacturer of vehicle wash systems in the heavy-duty vehicle and car wash industry, American Car Wash Solutions has the expertise and experience to guarantee both exceptional and environmentally sustainable results for your next stainless steel conveyorized car wash.

Inside Sales Representative II Arrow Electronics is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. Arrow Electronics guides innovation forward for over 220,000 leading technology manufacturers and service providers. With 2025 sales of $30.9 billion, Arrow develops technology solutions that improve business and daily life. The company maintains 228 locations worldwide with over 85 countries served. A Fortune 154 company with 21,500 employees worldwide, Arrow brings technology solutions to a breadth of markets, including telecommunications, information systems, transportation, medical, industrial, and consumer electronics. Arrow provides specialized services and expertise across the entire product lifecycle. Arrow does this by connecting customers to the right technology at the right place, time, and price. Arrow provides extraordinary value to customers and suppliers - the best technology companies in the world - and connects them through the company's industry-leading services. As an Inside Sales Representative, you will be selling Arrow’s line card of passive, electromechanical, and connector products, and be the daily contact for customers and suppliers. What You’ll Be Doing: • Managing the overall account relationship by providing strategic service and support to the assigned customer base. Maximize margins, gain market share, and drive value-added solution selling., • Working with internal and external resources, provide customer service, often facilitating work of others in quoting, fulfilling demand, ensuring on-time delivery of orders, providing engineering support, and troubleshooting other customer problems., • Functioning as key liaison between suppliers and customers to build and establish long-term business partnerships for Arrow., • Responsible for Sales Excellence through the development and management of customer strategy in assigned account territory., • Sell and drive Solutions Selling within the approved account level strategy. Requires knowledge of the competitive landscape in the market and the ability to make sales decisions based on that information., • Responsible for on-going Sales Support activities for the Order to Invoice process. Owns the customer interface for backend Quality processes: corrective actions, Field Quality Reports. Owns and Maintains Perfect Order Index (POI) and Inventory integrity to minimize write-offs/bill backs., • Owns the customer interface for important Credit and Financial Information as well as coordination of all available resources and support functions., • As owner of the overall customer Quote to Order sales objectives, set strategy for the quote process, coordinate resources and processing of customer quotations (Quote Center, Quote Cover Sheet, PM Views, Management, FSR, Suppliers, Value Add, and SSG), validate EOL and item class change (NCNR), negotiate pricing and Quote mark up (owns strategy and application) and notify the customer of all/any price increases. -This position is a 60/40 split. The salary posted is base pay only (on target OTE will be 95k+). What We Are Looking For: • 4-5 years’ experience in electronics distribution; experience in passive electronic component sales strongly preferred (Power Supplies, Cable assemblies, Thermal, Connectors, Magnetics, Capacitors/Resistors, • Systems savvy, ability to adapt quickly. Proficiency in MS Office Suite, advanced Excel skills (VLookup, Macros, etc.) a plus, • Ability to build influential relationships, • The ability to work collaboratively with internal and external resources to generate results, • Strong communication, negotiating, and organization skills, • Strong customer service and sales skills. This role will perform work covered by International Traffic in Arms Regulations. Viable candidates for this position must be eligible for an export license or be a U.S. Person (which includes but is not limited to U.S. citizens or nationals, lawful permanent residents, refugees, and asylees). Work Arrangement: If located in Denver, this position will follow a hybrid schedule of 3 days in our office (Tuesdays, Wednesdays, and Thursdays) and 2 days per week from home. If located elsewhere, you will be fully remote and must be able to travel to an Arrow office location as requested by Arrow leadership. What’s In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Short-Term/Long-Term Disability Insurance Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Paid Time Off (including sick, holiday, vacation, etc.) Tuition Reimbursement Growth Opportunities And more! #LI-KO1 $23.58 - $28.82 Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. US-CO-Denver, Colorado (Panorama Arrow Building) Full timeSales Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. _ All Arrow job postings are for existing job vacancies. We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application. In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Inside Sales Representative Arrow Electronics is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. Arrow Electronics guides innovation forward for over 220,000 leading technology manufacturers and service providers. With 2025 sales of $30.9 billion, Arrow develops technology solutions that improve business and daily life. The company maintains 228 locations worldwide with over 85 countries served. A Fortune 154 company with 21,500 employees worldwide, Arrow brings technology solutions to a breadth of markets, including telecommunications, information systems, transportation, medical, industrial, and consumer electronics. Arrow provides specialized services and expertise across the entire product lifecycle. Arrow does this by connecting customers to the right technology at the right place, time, and price. Arrow provides extraordinary value to customers and suppliers - the best technology companies in the world - and connects them through the company's industry-leading services. What You’ll Be Doing: Managing the overall account relationship by providing strategic service and support to the assigned customer base. Maximize margins, gain market share, and drive value-added solution selling. Working with internal and external resources, providing customer service, often facilitating the work of others in quoting, fulfilling demand, ensuring on-time delivery of orders, providing engineering support, and troubleshooting other customer problems. Functioning as a key liaison between suppliers and customers to build and establish long-term business partnerships for Arrow. Responsible for Sales Excellence through developing and managing customer strategy in assigned account territory. Sell and drive Solutions Selling within the approved account level strategy. Requires knowledge of the competitive landscape in the market and the ability to make sales decisions based on that information. Responsible for ongoing Sales Support activities for the order-to-invoice process. Owns the customer interface for backend Quality processes: corrective actions and field Quality Reports. Owns and Maintains Perfect Order Index (POI) and Inventory integrity to minimize write-offs/billbacks. Owns the customer interface for important Credit and Financial Information and coordinates all available resources and support functions. As the owner of the overall customer Quote to Order sales objectives, set strategy for the quote process, coordinate resources and processing of customer quotations (Quote Center, Quote Cover Sheet, PM Views, Management, FSR, Suppliers, Value Add, and SSG), validate EOL and item class change (NCNR), negotiate pricing and Quote mark up (owns strategy and application) and notify the customer of all/any price increases. This position is a 60/40 split. The salary posted is base pay only (on target OTE will be 90k+). What We Are Looking For: 2-4 years' experience in electronics distribution; experience in passive electronics (IP&E) component sales strongly preferred (Power Supplies, Cable assemblies, Thermal, Connectors, Magnetics, Capacitors/Resistors Systems savvy, ability to adapt quickly. Proficiency in MS Office Suite, advanced Excel skills (VLOOKUP, Macros, etc.) a plus Ability to build influential relationships. The ability to work collaboratively with internal and external resources to generate results. Strong communication, negotiating, and organization skills. Strong customer service and sales skills Work Arrangement: If located in Denver, this position will follow a hybrid schedule of 3 days in our office (Tuesdays, Wednesdays, and Thursdays) and 2 days per week from home. If located elsewhere, you will be fully remote and must be able to travel to an Arrow office location as requested by Arrow leadership. This role will perform work covered by International Traffic in Arms Regulations. Viable candidates for this position must be eligible for an export license or be a U.S. Person (which includes but is not limited to U.S. citizens or nationals, lawful permanent residents, refugees, and asylees). What’s In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Short-Term/Long-Term Disability Insurance Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Paid Time Off (including sick, holiday, vacation, etc.) Tuition Reimbursement Growth Opportunities And more! #LI-KO1 $21.48 - $26.26 Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. US-CO-Denver, Colorado (Panorama Arrow Building) Full timeSales Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. _ All Arrow job postings are for existing job vacancies. We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application. In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Join Atlas Air Worldwide. Move the World with Us! At Atlas Air Worldwide, we're not just an airline, we're a global engine powering cargo, passenger, and leasing operations across more than 70 countries. As a leader in outsourced aviation logistics, we're built on a foundation of safety, service excellence, integrity, innovation, teamwork, and responsibility. With over 30 years of history, a modern all-Boeing fleet, and nearly 5,000 teammates collaborating across operations, technical, and corporate functions, we're driven by purpose. If you're ready to grow, innovate, and help us deliver excellence every single day, you belong here. Position Summary: Atlas Air is seeking a detail-oriented and analytical Network Planning Analyst to help optimize our global cargo network. This role plays a critical part in the 2-year to 11-day planning window, driving insights that enable operational teams to execute the most efficient and reliable schedules. The successful candidate will provide actionable analysis on network delays, utilization trends, and operating performance, build models and reports to govern network operating parameters, and contribute to the development and implementation of software optimization tools that improve reliability and streamline planning processes. This position requires strong analytical skills, a proactive approach to problem-solving, and the ability to translate data into operational strategies that protect service quality and maximize network efficiency. Values and Behavioral Standards: To ensure the effective communication and application of company values and behavioral standards, as stated in our company "Code of Conduct" policy, and to respond appropriately in the event of deviations. The employee is expected to adhere to all company policies and to act as a role model in the adherence to company policies. Major Job Accountabilities: • Analyze and Monitor Network Performance, • Track and assess network delays, capacity utilization, and operating constraints to identify opportunities for efficiency gains and reliability improvements., • Develop and maintain key performance indicators (KPIs) for network operations and planning effectiveness., • Modeling & Optimization, • Build and maintain predictive models to assess scheduling scenarios and network performance under varying conditions., • Support the design, testing, and implementation of software optimization tools to enhance operational decision-making., • Reporting & Governance, • Develop periodic performance and reliability reports for customers, assisting in presentation creation, • Produce regular and ad hoc reports to monitor compliance with established operating parameters., • Establish data-driven processes to govern scheduling rules, protect operational integrity, and ensure alignment with reliability targets., • Cross-Functional Collaboration, • Partner with Operations, Planning, and Technology teams to integrate analytics into network planning and execution., • Provide insights that inform schedule adjustments, fleet utilization, and contingency planning., • Innovation & Continuous Improvement, • Identify opportunities to streamline workflows and automate recurring analyses., • Contributes to the development of new planning methodologies and tools that enhance decision-making and operational agility. Qualifications: • Bachelor's degree required in Industrial Engineering, Operations Research, Applied Mathematics, Data Science or related quantitative discipline or equivalent work experience., • 10 years of experience in strategy, operations planning, finance or continuous improvement, ideally with airline network planning, • Proficiency in SQL (Python and R are a plus) for data extraction and analysis; experience building decision-support tools, reporting tools dashboards (e.g., Tableau, Power BI), • Strong analytical skills with experience in statistical analysis, modeling, and scenario evaluation., • Strong problem-solving skills with the ability to work in a fast-paced, dynamic environment., • Excellent communication skills with the ability to convey complex analytical findings to non-technical stakeholders., • A proactive, solution-focused mindset with a passion for operational excellence and continuous improvement., • Knowledge of operations, scheduling, and capacity planning, ideally in airlines, transportation or other complex network operations #GH19 #LI-Hybrid #LI-20 The Company is an Equal Opportunity Employer. It is our policy to afford equal employment opportunity to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, citizenship, place of birth, age, disability, protected veteran status, gender identity or any other characteristic or status protected by applicable in accordance with federal, state and local laws. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law document by clicking "_" . To view our Pay Transparency Statement, please click here: _ Competitive compensation will be offered based on a variety of factors, including a candidate's experience, skills, education, geographic location, internal equity and other factors. In addition, a range of benefits to include medical, dental and vision insurance, employee assistance program, as well as generous paid time off, and 401K contributions are offered as a part of the total compensation package. Pay Range$191,000—$258,000 USD AtAtlas Air Worldwide, we believe in the power of people, the promise of innovation, and the responsibility we hold to each other, to our customers, and to the planet. Join us and be part of a team that lifts more than cargo; we lift ambition.

The NewYork Power Authority is a dynamic organization known for our innovative projects and collaborative work environment and are passionate about developing and delivering sustainable infrastructure solutions. The Engineering team is looking for a Mechanical Engineer II to play an important role in the design, planning and implementation of energy infrastructure projects. The successful candidate will manage engineering work tasks primarily related to power generation facilities. This includes project roles both independently and collaboratively leading research, design, and commissioning activities focused on improving NYPA's energy services. The successful candidate will ensure code compliance, quality assurance and control, cost, safety, reliability, schedule timeliness, and performance throughout all activities and deliverables. To deliver a successful project outcome, the successful candidate will analyze the design effectiveness and functional reliability of projects. The successful candidate will be part of the team responsible for implementing decarbonization, energy efficiency and clean energy technology projects at NYPA facilities related to mechanical infrastructure including rotational, thermal and fluid, refrigeration, fire protection, and process systems. The successful candidate will demonstrate experience with feasibility evaluations, designing, permitting, cost benefit analysis, construction, and commissioning of complex interdisciplinary mechanical energy efficiency projects in urban and rural environments. • Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities., • Perform site visits to complete field condition assessments, and equipment evaluations and develop technical recommendations with moderate complexity., • Perform occasional emergency response, including outside of normal business hours., • Independently coordinate cross disciplinary activities for the successful development and execution of projects., • Select and apply codes, standards and procedures to work tasks appropriately., • Perform evaluations to ensure engineering requirements and Authority specifications are satisfied., • Provide technical leadership in state-of-the-art engineering and analytical techniques., • Review designs, calculations, specifications, and reports produced by other internal engineers and external consultants., • Provide direction and review for the mechanical design and drafting personnel in the development of project drawings (site-based)., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Proficient in the design, operation and maintenance of mechanical systems specific to the electric utility industry and power system components with projects related to power generating plant and substation facilities (site-based). (site-based), • Working knowledge of mechanical - commercial and industrial facilities and their various systems and components]., • Ability to apply diverse technical principles and practices, with the understanding of the NYPA's policies, operations and objectives, to engineering deliverables., • Working knowledge of applicable codes, standards, regulations., • Strong verbal and written communication skills., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to coordinate the technical and commercial aspects of projects., • Ability to perform engineering calculations, and complete specifications, scopes of work, reports, and interdisciplinary design packages., • Competent in the use of Microsoft Office applications., • Working experience with a Mechanical design or forecasting software preferred (site-based)., • Ability to effectively manage and prioritize multiple projects., • Proficient in the design, operation and maintenance of , mechanical systems for commercial and industrial facilities and their various systems and components (Customer-based)., • Bachelor of Science Degree in Mechanical Engineering, or equivalent, from an accredited college or university., • Minimum of eight (8+) years of work-related experience., • New York State Engineer in Training certification preferred., • Approximately 10% travel primarily within NY State., • Ability to access all areas of the plant and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $129,000-$161,100. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing Employment Type: Full-Time or Part-Time Availability: Open Availability Required Number of Openings: Salary Range: Competitive Work Environment: Exposure to extreme temperatures (hot/cold); food handling environmentJob Summary:The Industrial Mechanical Technician is responsible for providing mechanical and electrical maintenance support at SFS client facilities. This role focuses on preventative maintenance, troubleshooting, equipment repair, and supporting system installations to ensure safe, reliable, and efficient plant operations. Technicians are assigned to client sites based on their weekly availability and may work across multiple facilities depending on operational needs. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times.Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required.If you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

Position Overview: InnoActive Group are leaders in providing project management and technology advisory primarily in public agencies and Fortune 500 entities. InnoActive Group has managed various construction and technology projects ranging in size from small projects to multi-billion-dollar capital programs. We are seeking a highly motivated and detail-oriented Technology Analyst to support our construction and project operations teams. This role is ideal for candidates with experience supporting construction technology platforms, project reporting, and operational systems within construction, infrastructure, utilities, energy, or industrial environments. The ideal candidate will have hands-on experience with Power BI reporting and analytics, while also serving as a key administrator and support resource for Procore and other project technology systems. This individual will work closely with project managers, field teams, operations leadership, and stakeholders to improve reporting visibility, streamline workflows, and support project execution through technology solutions. Key Responsibilities: • Serve as the primary administrator and support resource for Procore, including user management, permissions, workflows, document control, and system configuration., • Support implementation, maintenance, and optimization of construction technology platforms and project management systems., • Assist project teams with troubleshooting system issues, user support, training, and platform adoption., • Collaborate with operations, project management, and field teams to improve technology utilization and project workflows., • Develop, maintain, and enhance Power BI dashboards, reports, and data visualizations for project and operational reporting., • Analyze project, financial, scheduling, and operational data to provide actionable insights and performance tracking., • Work with internal stakeholders to gather reporting requirements and build scalable reporting solutions., • Support data integrity, validation, and reporting consistency across multiple systems and platforms., • Assist with improving project reporting processes, automation opportunities, and workflow efficiencies., • Support integration and coordination between Procore, ERP systems, scheduling platforms, and reporting tools., • Maintain organized project data, system documentation, user guides, and reporting standards., • Support onboarding of new users and maintain system governance standards., • Ensure project documentation and technology processes align with company procedures and operational standards., • Support data security, user access management, and compliance with company technology policies. Requirements: • Bachelor’s degree in Information Systems, Construction Management, Business, Engineering, Data Analytics, or a related field preferred., • 3+ years of experience supporting construction technology systems, project controls, operations reporting, or related functions., • Experience with Power BI, including dashboard development, reporting, and data visualization., • Experience with Procore administration or strong willingness and aptitude to learn and manage the platform., • Experience supporting construction, infrastructure, utilities, energy, engineering, or industrial project environments preferred., • Strong understanding of project documentation, reporting workflows, and operational processes., • Experience with Microsoft Excel, Office Suite, and data/reporting tools., • Experience with ERP systems, project management software, or scheduling platforms is a plus., • Strong communication, organizational, analytical, and problem-solving skills., • Ability to manage multiple priorities and support fast-paced project environments. If you are a results-driven, analytical thinker with a passion for ensuring successful project delivery, then we want to hear from you. Apply now to join our team as a Technology Analyst and contribute to delivering solutions that make a difference in the lives of our customers. We offer a competitive salary and benefits package, along with opportunities for professional development and advancement. InnoActive Group is an equal opportunity organization and will not tolerate discrimination based on age, ethnicity, ancestry, gender, national origin, disability, race, size, religion, sexual orientation, socioeconomic background, or any other status prohibited by applicable law. InnoActive Group participates in e-Verify.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Project Manager Division: Hudson Valley Location: Elmsford, NY Reporting to: General Manager Position Summary: We are seeking a skilled and experienced Electrical Project Manager to join our team. The ideal candidate will oversee and coordinate projects, ensuring they are completed on time, within budget, and in compliance with E-J's safety regulations and quality standards. Responsibilities include planning, monitoring progress, and providing updates to stakeholders, clients, and team members. As a Project Manager at E-J, you will collaborate with diverse teams, communicate effectively with clients, subcontractors, and vendors, and play a key role in delivering successful electrical projects for our valued clients. What You’ll Do: • Create and manage project schedules, milestones, and deliverables to ensure timely project completion, • Provide regular project updates to clients and stakeholders, informing them of project status, risks, and milestones, • Liaise with field supervision, • Attend and run project meetings, • Maintain accurate project documentation, including progress reports, change orders, and project closeout documents, • Estimating, • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress, • Develop comprehensive project budgets, monitor costs, and implement cost-saving measures when possible, • Procure and coordinate necessary materials, equipment, and subcontractors for each project, • Identify areas of process improvement and implement best practices to enhance project efficiency and profitabilityQualifications:, • Minimum of 5 years of project manager experience required, • Proficiency in Microsoft Suite in addition to project management software; E-J currently uses Procore, Emque, Riskcast, Toric, and more, • Bachelor's degree or equivalent work experience in the electrical contracting/engineering space, • Strong organizational & multi-tasking skills with attention to detail, • Practical knowledge of construction, • Strong business acumen in project planning and management, • Excellent written and verbal communication skills, • Practical knowledge of construction processesAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $85k-$115k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR mwhIfVNG0F

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role serves as a key operational and technical liaison supporting the successful development of geothermal projects from pursuit through preconstruction. Reporting to the Director of Geothermal Operations, this role functions as the dedicated Operations Subject Matter Expert (SME) supporting Business Development, Engineering, and Operations throughout project development. This position provides technical guidance, constructability insight, and process leadership to ensure projects are operationally feasible, financially aligned, and positioned for successful execution. The role works cross-functionally with Business Development, Engineering, Operations, and Innovation teams to optimize drilling strategy, support forecasting efforts, and help align organizational capacity with projected opportunities. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Serve as the primary Operations SME supporting Business Development during project pursuit and preconstruction phases., • Act as the main point of contact for technical, construction process, and operational questions during project development., • Lead and coordinate the operational preconstruction process from project concept through handoff to execution teams., • Collaborate cross-functionally with Business Development, Engineering, Operations, and Innovation teams to ensure alignment between project strategy and field execution., • Evaluate constructability, operational risk, equipment needs, and resource requirements during project development., • Support innovation initiatives focused on drilling optimization, productivity improvements, and operational efficiency., • Partner with the Director of Drilling Operations to:, • Forecast projected revenue from business development pipeline opportunities., • Analyze drilling-only opportunities and assess operational capabilities., • Identify gaps in equipment, crew resources, and operational support., • Work with the Operations Coordinator to consolidate pipeline projections with ongoing project financials to provide leadership with a complete operational and financial outlook., • Assist in the development and refinement of preconstruction workflows, tools, and operational standards., • Support continuous improvement initiatives related to drilling strategy, planning, and execution., • All other duties and responsibilities as assigned. Qualifications: • Bachelor's degree in Engineering (Mechanical, Civil, Environmental, Construction, or related field required)., • 1–2 years of relevant professional experience in engineering, construction, energy, or related technical fields., • Strong technical and analytical problem-solving skills., • Ability to communicate effectively across multidisciplinary teams., • Demonstrated organizational skills and ability to manage multiple priorities., • Interest in geothermal drilling operations, renewable energy, or construction operations preferred., • Experience with CRM platform Hubspot., • Experience with project management or construction platforms (Procore, Monday.com, etc.) is a plus. Supervisory Responsibility: This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the base salary. The base annual salary range for this position is $75,000-$95,000 and is eligible for an annual performance-based bonus. Travel Requirements: • Travel required up to 25% to work/project sites in the greater Northeast Region (but not limited to) of the United States. Work Environment: • Work site setting., • Office setting. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • This is not a safety sensitive position. Drug & Alcohol-Free Workplace: Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits, • Access to Marketplace for Discounted Goods & Services Brightcore Energy is committed to bringing together individuals from different backgrounds and perspectives. Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Overview Founded in 1967, ImageFIRST® is the largest and only national linen rental and laundry service specializing in the healthcare market. Acquired by private equity firm Calera Capital in 2018, ImageFIRST serves medical facilities nationwide providing linen, patient gowns, scrubs, and more while managing their clients’ linen inventory for cost management. As leaders in infection prevention, they currently own and operate the most HLAC-accredited facilities in the industry. With one of the highest customer retention rates in the industry – 97% – ImageFIRST is dedicated to improving patient satisfaction and making staff happy with our white glove service! Check out our company page: https://www.imagefirst.com/company/ Responsibilities The Vice President, Project Engineering & Maintenance provides strategic leadership for various projects, manufacturing equipment and rebuild, and technical operations to ensure safety, efficiency, and compliance. This position will oversee preventative maintenance, manage capital expenditure projects, lead technical teams, and manage departmental budgets to support operational goals. This role will also develop and oversee robust project management processes and delivery timelines, ensuring that the project/milestones/goals are met. The VP, Project Engineering & Maintenance provides support to the field by: • Leading Project Engineers to execute ImageFIRST’s capital plan, • Managing capital projects: driving projects and metrics, • Building a comprehensive Maintenance Program to include scope, KPI's, timelines, etc., • Oversee, execute, and drive rebuilding of equipment to achieve company goals, • Negotiating vendor and contractor pricing, • Implementing best practice engineering methods, • Providing technical guidance to engineering team and top management, • Leads engineering and maintenance teams, focusing on performance management, training, and building a safe, collaborative environment., • Identifying and navigating organizational changes POSITION QUALIFICATIONS: VP, Engineering & Maintenance must have excellent multi-disciplinary engineering skills and have exceptional leadership, communication, and project management skills. • This position requires a self-starting, motivated person who possesses strong organizational skills, can work well independently, and has strong interpersonal skills for working with associates and leadership of ImageFIRST as well as vendor and contractor partners., • An entrepreneurial/business savvy mindset is essential REQUIREMENTS: • BS in Engineering (mechanical, electrical, or industrial engineering from an accredited college or university), • MBA preferred, • 8+ years of progressive leadership experience in Engineering, • Experience must include project management (projects greater than $500,000 in scope), • Lean Six Sigma certification is a plus Qualifications Required Competencies: • Be Respectful: Value all we come in contact with, • Be Remarkable: Create a positive moment with every interaction, • Be Safe: Keep ourselves and those around us safe, • Be Honest: Be guided by truthfulness in all we do Benefits: • Weekly pay, • Medical, Dental, Vision, • Pet, Legal, and Hospital Indemnity Insurance, • 401k (match), • Paid Time Off Package, • Paid Parental Leave, • Tuition Reimbursement, • Referral Program, • Great company culture, • Collaborative team environment EOE / Drug-Free Workplace We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by applicable law. We are fueled by the talent, passion, and diversity of our associates.

Job Description SUMMARY The Boiler Sales and Application Engineer delivers customer-facing sales and technical support within the assigned sales territory, focusing on achieving sales targets and delivering exceptional customer service. The role combines boiler plant technical expertise with advanced sales skills to provide clients with solutions for boiler applications, manage major project interactions, and work with the service and project management team to ensure successful conclusion of the sale. This role requires a fundamental understanding of boiler (ideally Cleaver-Brooks) products and a capacity for guiding engineering design with contractors and engineering teams. KEY RESPONSIBILITIES Sales and Customer Relationship Management • Conduct on-site visits within the service area to meet sales objectives and enhance client relationships., • Prepare and present price quotations and bids, ensuring alignment with material, labor, and manufacturing schedules., • Enter customer and sales data into CRM (HubSpot), and maintain detailed, up-to-date records., • Build and sustain robust relationships with key purchasing contacts, including contractors, engineers, and owners., • Monitor market trends, competitor activity, and sales indicators to inform sales strategies. Technical Sales and Engineering Support • Provide installation advice, turnkey solutions, and system design feedback to contractors and building owners, serving as the company’s technical liaison., • Lead project execution from initial design and project management stages, ensuring smooth handoff to the service and project management team., • Conduct equipment demonstrations and “Lunch and Learn” sessions for contractors, engineers, and clients., • Act as a critical technical resource for the client, offering expertise and advice with the goal of influencing the specification to include products within our distribution portfolio., • Participate in ASHRAE and similar industry events for professional development and networking. Regulatory and Product Knowledge • Maintain up-to-date knowledge of Cleaver-Brooks boiler applications and relevant industry standards, providing expertise to clients., • Coordinate factory visits for clients and engineers to enhance product understanding and customer engagement. Cross-Functional Collaboration • Work closely with project managers, inside sales engineers, and the service department to deliver cohesive, well-supported solutions to clients., • Participate in strategic initiatives to refine sales processes, improve team performance, and drive revenue growth. COMPENSATION • As this is a sales role, the compensation has a base pay and an unlimited commission potential., • The base pay is $80,000 per year., • The Commission is 10% of profit for sales up to a target, 12% of profit up to the next target, and 15% of profit up to an unlimited level., • It is not uncommon for this role to earn a total compensation of $130,000 to $160,000; and on larger project years exceed $200,000., • ESOP Benefits are also in the range of 15% to 30% of base salary. QUALIFICATIONS • Education: Bachelor’s degree in engineering, marine engineering or a related field., • Experience: Minimum 5 years in sales with a focus on boiler or heavy industrial applications., • Skills: Strong communication, customer service, and negotiation abilities; proficiency in equipment and software applications relevant to the role.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Pursue professional development opportunities, including licensure (e.g., PE, LEED AP). Qualifications: • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills., • EIT certification preferred; PE license is advantageous but not mandatory at this level. All candidates must be legally permitted to work in the United States of America, pass a background check, a drug screening and reliably commute to both the Sleepy Hollow, NY office and on occasion to a job site. The Candidate must have their own auto insurance in their own name and meet corporate minimums for coverage. Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 127-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Jr. Estimator Division: Clean Energy - EHV Location: Elmsford, NY Reporting to: Operations Manager Position Summary: E-J’s Junior Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your experience in estimating and pricing will help drive successful project bids to ensure the company’s continued growth and success in the dynamic Long Island market. Roles and Responsibilities: • Review and analyze project plans & drawings, specifications, and other relevant documents to comprehensively understand the scope of work and project requirements, • Assist in preparing detailed and accurate cost estimates for electrical projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, Bluebeam) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings/leveling meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to get pricing and information back quicker and quality resources, • Stay updated with industry trends, advancements, and regulatory changes that may impact project costs or estimating techniques, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications:, • Bachelor’s degree in electrical engineering, construction management, or a related field preferred, • 1-3 years experience preferred, • Knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormick, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Highly motivated team player, • Excellent communication skills, • Proficient in MS Office Suite and Outlook softwareAdvantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $60k-$80k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR pp4e8HBYV8

Job Description Fire Protection Engineer General Firm Description OLA Consulting Engineers, PC is a mid-sized consulting engineering firm with offices in New York City and Westchester County, NY. Established in 1974, OLA Consulting Engineers, PC is a financially secure company that has a longstanding reputation of excellent engineering, a solid base of repeat clients, and a growing list of new clients. Our firm provides mechanical and electrical design services, energy modeling/analysis, and commissioning services for commercial, industrial and institutional facilities. We place special emphasis on high performance building design and energy efficient systems. Our projects include new construction, retrofits, and renovations. As the continuing education and development of our team is paramount in our effort to deliver innovative engineering solutions, OLA provides excellent mentoring and on-site, as well as off-site, training for continuous skill enhancement. For additional information, please visit our web site at www.olace.com. Job Description OLA has an immediate need for fire protection engineers [PL1] with five to eight (5-8) years of U.S. Consulting experience in fire protection system design services including but not limited to water-based and non-water-based systems, fire pumps, and fire alarm systems. The candidate shall be responsible for conducting building code reviews and analyses, performing and reviewing hydraulic calculations. The candidate will be expected to work closely and coordinate with teams in both the NYC and Westchester Offices and be available in both offices as needed. Responsibilities will include field investigation, analysis, design, production of contract documents, management and direction of junior engineers, construction administration services, and project management services. The candidate shall be able to work on multiple projects and must have great communications skills for relating to clients, other design professionals, contractors, vendors and his/her peers. Qualifications: • Minimum: Bachelor of Science in Mechanical Engineering or Fire Protection Engineering., • Five to Eight years of US Consulting Engineering experience will be considered., • Familiarity with New York State and New York City codes as well as International Building Codes, • PE Preferred, or ability to obtain., • Experience in fire protection sprinkler and standpipe system design and performing hydraulic calculations in accordance with applicable codes and standards., • Experience in the preparation of construction documents including floor plans and specifications., • Experience conducting building code analyses, on-site investigations and inspections., • Working knowledge of AutoCAD required, knowledge of Revit a plus, • Demonstrated capabilities in professional service business processes., • Excellent oral and written communication skills., • Excellent organizational skills. Benefits: At OLA, we provide a very competitive compensation and benefits package. The following is a partial list: • Medical, dental, vision and prescription plans, • Disability and Life insurance plans, • 401(k) with employer contributions, • Profit sharing, • Competitive salary, • Overtime pay, • Tuition assistance, • Continuing professional development, • Paid Vacation, • Paid Holidays, • Paid Sick/Personal time, • Flexible Work Environment Please identify the office you are applying to and submit your cover letter & resume to: hr@olace.com Job Type: Full-time Pay: From $36.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Professional development assistance, • Tuition reimbursement, • Vision insurance Schedule: • Monday to Friday Education: • Bachelor's (Required) Experience: • AutoCAD: 1 year (Required), • Revit: 1 year (Preferred) Work Location: In person

Job DescriptionDescription: Job Title: Quality Control Engineer / Quality Specialist Location: Spartanburg, SC or Mount Vernon, NY Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: Ice Air is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a motivated Quality Control Engineer / Specialist to support the reliability, performance, and continuous improvement of our HVAC products and manufacturing processes. This role will focus on identifying quality issues, performing structured root cause analysis, improving internal processes, and strengthening feedback loops between manufacturing, engineering, service, and customers. The ideal candidate will have experience working in a manufacturing or service-oriented environment and will be comfortable analyzing technical problems, communicating with cross-functional teams, and driving corrective actions that prevent recurring issues. This individual will play an important role in helping build more robust systems and improving the overall customer experience. Key Responsibilities: • Lead Root Cause Corrective Action (RCCA) investigations into internal quality issues, field failures, and customer complaints., • Utilize structured problem-solving tools such as 8D, 5-Why analysis, Fishbone diagrams, Pareto analysis, and FMEA to identify root causes and implement corrective actions., • Analyze service trends, warranty data, and field performance information to identify recurring issues and improvement opportunities., • Work closely with engineering, manufacturing, and service teams to strengthen system reliability and help “bullet-proof” HVAC equipment performance in the field., • Develop and maintain quality control processes, inspection standards, and documentation to ensure consistent production quality., • Partner with manufacturing teams to identify process weaknesses and implement improvements that reduce defects and variability., • Monitor quality performance indicators including defect rates, warranty trends, service call data, and customer feedback., • Support containment activities and corrective action implementation when quality issues arise., • Communicate clearly with both technical teams and leadership, ensuring issues and solutions are understood across the organization., • Assist with customer communication when necessary to explain findings, corrective actions, and improvement plans., • Support new product introductions by validating quality processes and production readiness., • Help drive a culture focused on continuous improvement, accountability, and proactive quality management. What We Offer: • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.Requirements: Required Qualifications • Bachelor’s degree in engineering, Industrial Engineering, Mechanical Engineering, Quality Engineering, or related technical field preferred., • 2–4 years of experience in quality engineering, manufacturing, service engineering, or related technical roles., • Hands-on experience performing root cause analysis and implementing corrective actions., • Strong analytical and data interpretation skills with the ability to identify trends and improvement opportunities., • Ability to work effectively across multiple departments including operations, engineering, service, and leadership teams., • Strong written and verbal communication skills., • Proficiency with standard business tools including Excel, Word, and PowerPoint. Preferred Qualifications • Experience with HVAC systems, refrigeration systems, or electro-mechanical assemblies strongly preferred., • Experience working with service teams or customer feedback loops is a plus., • Experience with HVAC equipment such as PTAC units, packaged systems, or commercial HVAC products., • Familiarity with manufacturing quality systems, continuous improvement methodologies, or Lean/Six Sigma environments., • Experience performing failure analysis or reliability investigations., • Ability to help build structured processes that prevent issues rather than simply reacting to them. Personal Attributes • Strong problem-solver with a curiosity for understanding technical failures., • Comfortable working in a fast-paced manufacturing environment., • Ability to communicate effectively across all levels of the organization., • Collaborative mindset with the ability to influence teams and drive improvements., • Focused on building durable systems, strong processes, and long-term quality improvements.

Job DescriptionMulti-discipline engineering firm in business for decades is looking for a Senior Project Mechanical Engineer for their White Plains office! Responsibilities: • Design of HVAC systems for small and large projects for a variety of building types (industrial buildings, schools, firehouses, commercial buildings), • Supervise/coordinate projects with other engineering and architecture departments, • Prepare construction drawings/specifications, • Build/maintain client relationships, • Project leadership including providing technical direction, production and scheduling, quality control and cost proposal preparation, • Assist with business development, • Mentor/train junior staff Requirements: • Bachelor’s degree in mechanical engineering, • 6+ years of HVAC design experience, • 5+ years of project management experience, • Experience working with municipalities and government agencies preferred Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Estimator Division: Hudson Valley Location: Elmsford, NY Reporting to: General Manager Position Summary: E-J’s Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your expertise in estimating and pricing will help drive successful project bids, ensuring the company’s continued growth and success in the market. What You’ll Do: • Review and analyze project plans, specifications (including drawings and schedules), and other relevant documents to gain a comprehensive understanding of the project's scope and requirements, • Prepare detailed and accurate cost estimates for projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, BLUEBEAM) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to obtain pricing and information, • Prepare regular reports and summaries on cost tracking and estimating accuracy, • Collaborate with the Engineering and Project Management Teams to clarify any ambiguities and gather necessary information for accurate estimation, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications:, • Minimum of 5 years of experience working in electrical estimating, • Bachelor’s degree in electrical engineering, construction management, or a related field/equivalent experience is preferred, • Proficient in the Microsoft Suite, • Proven experience as an electrical estimator in the construction industry, preferably with expertise in electrical systems and installations, • Strong knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormack, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Ability to work under pressure and meet tight deadlines in a fast-paced, dynamic environment, • Familiarity with the local construction market and regulations is advantageous, • Highly motivated team player, • Practical knowledge of construction (new & renovation)Advantages of Working at E-J:, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $85k-$115k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR RqN58Qglqq

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: Brightcore Energy is seeking an Assistant Project Manager (APM) to play a pivotal role within our team based in Armonk, NY/Brooklyn, NY. This position is strategically positioned to make substantial contributions to the expanding growth of our Geothermal Development team. The key responsibilities involve managing a diverse range of development responsibilities, both in-office and on-site, to ensure the successful implementation of geothermal projects. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Assist in collaborating closely with project stakeholders to craft comprehensive construction plans, budgets, and timelines aligned with project goals., • Support the on-site project management activities, including overseeing drilling operations and subcontractor activities under the guidance of the Construction Project Manager., • Assist in managing the subcontractor and vendor process, including vetting, sourcing, quoting, and onboarding procedures., • Lead the permitting research, submittals, and approvals process., • Assist in coordinating all project deliverables on monday.com, involving engineering, drilling operations, subcontractors, vendors, and the Construction Manager., • Assist in establishing and managing Procore data, including daily logs, RFIs, invoice approvals, budget, and change orders., • Collaborate in creating a comprehensive master project schedule for execution., • Work alongside engineering teams to ensure design specifications align with project requirements., • Support the drilling operations team by coordinating work orders and addressing vendor requirements for on-site equipment rentals., • Assist in coordinating and executing crucial construction tasks for renewable energy sites, both exterior and interior aspects., • Participate in supervising and coordinating all exterior and interior construction activities, including demolition, installation, renovation, and preparation work., • Maintain oversight of construction activities to ensure adherence to quality standards, conducting regular inspections, and implementing quality control measures., • Support in establishing and enforcing protocols for site preparation, infrastructure development, and overall construction, ensuring safe, timely, and high-quality project completion., • Assist in resource allocation, including equipment, materials, and labor, to optimize construction efficiency and minimize waste., • Assist in upholding stringent safety and quality control measures to ensure compliance with safety regulations and company policies., • Facilitate regular meetings to communicate project goals, expectations, and updates effectively., • Support in monitoring project expenses, tracking costs, and providing comprehensive budget status reports to senior management., • Perform any other duties and projects as assigned by the Construction Project Manager., • All other duties and projects as assigned. Qualifications: • Bachelor's degree in Construction Management, Project Management or a related field., • 3-5+ years' experience with project management (both field work and remote office work) in general construction., • Experience with geothermal heating and cooling systems preferred., • Understanding of construction process, experience with permitting, building codes, safety requirements, subcontractor / vendor management, site supervision and scheduling., • Strong customer service skills., • Experience and knowledge of the regional technical standards, building regulations, codes and safety requirements., • Extensive travel to customer sites in New York and New Jersey., • Experience with Procore and Monday.com not needed by nice to have. Supervisory Responsibility: This position does not have supervisory responsibility. Expected Hours of Work & Salary: An Employee must work a minimum of thirty (30) hours each week to maintain full-time status for benefits purposes, however the expectations of the position will require an average of forty (40) hours with overtime required as scheduled. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to complement the base salary. The base salary hiring range for this position is $90,000.00-$130,000.00. Travel Requirements: • Travel may be required up to 30% to work/project sites in the greater Northeast Region (but not limited to) of the United States. Work Environment: • Work site setting., • Office setting. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • This is a safety sensitive position. Drug & Alcohol-Free Workplace: Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits, • Access to Marketplace for Discounted Goods & Services Brightcore Energy is committed to bringing together individuals from different backgrounds and perspectives. Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The position will serve a core role in the oversight and management of Veolia Water New York’s (VWNY) environmental compliance operations related to water quality, water/wastewater treatment, and distribution monitoring in Veolia’s North American operations. As a member of the Water Quality Department, the team member will be continuously working to ensure that the water quality of the VWNY operations consistently meets and surpasses water quality standards as required by the county, state and federal regulatory agencies. This member will also be dedicated to advancing the operational best practices of Veolia. A strong understanding of compliance rules and regulations in the water sector is essential. Primary Duties/Responsibilities: • Support the development, operation, and maintenance of a compliance data management system (e.g. SAMS)., • Responsible for the development and maintenance of various compliance tracking mechanisms (spreadsheets, dashboards, key performance indicators, etc.) to monitor operations and compliance., • Stay up to date with water and wastewater regulations within the regions where VWNY operates., • Supervise the sample collection process to ensure required samples are collected within all State and Federal schedules., • Maintain good relationships with contract laboratories and review data generated for accuracy., • Ensure the State and Federal sampling plans are up to date, and sampling schedules are configured and uploaded into the data management system for various facilities., • Timely preparation and dissemination of required reports, both internally and externally., • Assist with identifying root causes of water quality/treatment issues; recommend and assist production with implementing and monitoring optimized treatment solutions to maintain water quality., • Assist with addressing customer water quality issues through sampling and qualitative and quantitative laboratory testing., • Assist with the development of training documents, SOPs, and related materials. Train employees on regulatory requirements, sample collection, and field analysis procedures., • Participate in or support special projects/initiatives related to WQ (e.g. Lead & Copper Rule, PFAS treatment) to enhance compliance and optimize treatment methods and/or quality of product, including unregulated contaminants., • Operate within a team-oriented atmosphere, motivate and support peers in achievement of shared objectives, and maintain professional relationships with all internal and external staff., • Perform other duties, as assigned. Work Environment: • While this role is primarily office-based, special assignments may require working in various field environments., • These environments can include outdoor locations during inclement weather, as well as indoor areas such as water/wastewater treatment plants, customer properties, pumping stations, and roadways, as needed to complete the required work. Qualifications Education/Experience/Background: • Bachelor’s Degree in Chemistry, Environmental Science, Engineering and/or Biology, preferred., • Master’s degree in related fields is a plus., • 2+ years of overall experience in data management/analytics, Water/Wastewater Quality/Environmental compliance reporting preferably working with drinking water or wastewater treatment plants, or other processes/facilities (e.g. industrial waste treatment) that are governed by Federal or State environmental regulatory agencies. Knowledge/Skills/Abilities: • Working knowledge of water quality regulations and water treatment plant processes., • Basic knowledge of chemistry, biology and mathematics., • Strong data management skills. Ability to manage and interpret WQ date (data management / database management)., • Demonstrated ability to problem-solve or trouble-shoot laboratory or treatment issues to ensure organizational goal of zero violations is met., • Ability to communicate effectively both orally and in writing., • Ability to shift priorities frequently and effectively depending on project requirements and deadlines., • Strong interpersonal skills to effectively interact with teams at all levels, both internally and externally., • Basic understanding of environmental compliance regulations, • Ability to use Google Workspace and Excel. Required Certification/Licenses/Training: • Possesses and maintains a valid driver's license and safe driving record if required to use company vehicles. Additional Information Pay Range: $75000 to $83000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description JOB TITLE: Embedded Software Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $115,000 – $155,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Embedded Software Engineer will be working alongside our existing software engineers, electrical engineers on medical device development. This role is multi-disciplinary with technical responsibility for designing, developing, and testing device control software, both at the driver and at the application level. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities: • Design, develop and maintain embedded software applications for various platforms, including microcontrollers and microprocessors, • Develop drivers for interfacing with motor controllers, cameras, scanners, and PLC systems, • Collaborate with hardware engineers to define system requirements and develop software architecture designs, • Implement real-time operating systems (RTOS) and device drivers to support hardware functionality, • Write efficient and reliable code in C/C++ for embedded systems, ensuring optimal performance and resource utilization, • Conduct unit testing and debugging of software modules to identify and resolve defects, • Participate in code reviews and provide constructive feedback to ensure code quality and maintainability, • Work closely with cross-functional teams, including firmware engineers, hardware engineers, and QA testers, to integrate software components and validate system functionality, • Stay updated on emerging technologies and industry trends related to embedded software development, and incorporate best practices into our development processes, • Document software designs, specifications, and test procedures to support product development and regulatory compliance efforts, • Collaborate with external partners and suppliers as needed to integrate third-party software components or tools into our embedded systems Qualifications: • Bachelor’s degree in Computer Science, Electrical Engineering, or related field. Master’s degree preferred, • 5+ years of experience in embedded software development, with a strong proficiency in C/C++ and Python programing languages, • Prior experience working in a LINUX environment, • Prior experience working with GIT or other code repository systems, • Solid understanding of the TCP/IP protocol stack, • Solid understanding of multithreading and real-time embedded systems, including RTOS, device drivers, and hardware-software interfaces, • Prior experience utilizing PID-based control for motion and temperature regulation, • Experience with embedded development tools and environments, such as IDEs, debuggers, and version control systems, • Familiarity with microcontroller architectures and peripheral interfaces (ex: Ethernet, Serial, UART, SPI, I2C, GPIO), • Familiarity with industrial communication protocols such as MODBUS, • Knowledge of software development lifecycle (SDLC) processes and quality assurance principles, • Strong analytical and problem-solving skills, with the ability to troubleshoot complex software issues, • Excellent communication and teamwork abilities, with a collaborative approach to problem-solving, • Demonstrated ability to work effectively in a fast-paced, deadline-driven environment, • Prior experience in Agile development methodologies and continuous integration practices, a plus, • Experience with robotics platforms like ROS or YARP, a plus, • Experience interfacing with Clinical Lab Information Systems, a plus, • Experience in addressing data security and compliance with HIPPA regulations, a plus, • Histology laboratory workflow experience, a plus, • Experience building visions systems for process and quality control, a plus Company Offers: • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description JOB TITLE: Senior Embedded Software Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $140,000 - $190,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Senior Embedded Software Engineer will be working alongside a team of other engineers, such as mechanical, electrical and optics and will provide software tools for streamlining product development. on medical device development. This role is multi-disciplinary with responsibility for designing, developing, and testing device control software, both at the driver and at the application level. The ideal candidate will bring extensive experience in embedded systems, real-time programming, and a proven track record of delivering high-quality software solutions. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities: • Development of software for a robotic system that automates pathology, • Development of algorithms for controlling a multi-component mechatronic system based on software requirements, • Writing of production level code that will be released onto marketable product, • Development of real time, feedback control loops, • Development of interfaces between mechanical and software components of the system (for example, motor controllers, cameras, and actuators), • Creation of simulation of robotic system for testing Qualifications: • Bachelor’s or Master’s Degree in Computer Engineering, Computer Science, Mechanical, Aerospace, Biomedical or Electrical Engineering or related fields, • 7+ years of relevant work experience in medical devices, automotive, aerospace or industrial control applications, • Experience with high fidelity control loops, • Direct experience with C/C++ and Python, • Ability to work in a LINUX environment, • Experience working with GIT or other code repository systems, • Good foundation in TCP/IP protocol stack, • Understand Multithreading and Real Time Systems, • Experience working with PID based control for motion and temperature control, • Knowledge of hardware communication interfaces such as Ethernet, Serial, SPI, I2C, • Familiarity with industrial communication protocols such as MODBUS, • Experience working with robotics platforms such as ROS or YARP is a plus, • Understanding of CI/CD pipelines and using industry best practices for software development and deployment, • Strong interpersonal, verbal, and written communication skills, • Time management skills to prioritize and meet deadlines, • Ability to work independently and as a member of a team, • Flexibility to work in a changing and fast paced environment, • Drive, determination, and ability to hit aggressive milestones/deadlines Company Offers: • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays)., • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Contract position with a client located in.Rate Range: $75-$80/hr on W2 without benefits, The rate may be negotiable based on experience, education, geographic location, and other factors.Title: Technical Project Manager.Location: Tarrytown, NY (HYBRID).Enterprise Cyber Resilience Program.Active Dir

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Myriad360 seeks a Senior Project Manager with at least 8 years of experience to manage high-impact IT projects remotely.Responsibilities include ownership of the project lifecycle and maintaining internal business requirements.The ideal candidate will possess strong leadership and communication skil

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

The NetSuite Project Manager is responsible for planning, executing, and finalizing NetSuite implementation projects within scope, budget, and timeline.This role involves coordinating with internal teams, clients, and stakeholders to ensure successful project delivery.The Project Manager will overse

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

A leading cybersecurity firm is seeking a Cyber Tools Engineer to enhance client cybersecurity initiatives.This role requires over 10 years in network security tools and 7 years of cybersecurity experience.Responsibilities include designing security capabilities, developing detection methods, and co

Arunarcis Solutions is seeking a candidate with experience in Account Management, Client Servicing, or Project Management, preferably within a digital agency.The ideal applicant should have a strong understanding of IT project delivery cycles, including web/app development, cloud services, and digit

A major food and beverage services company seeks a Manager for IT Solutions in Integration Operations.This remote position involves managing the production environment of digital applications, leading releases, and coordinating with cross-functional teams.Candidates should possess over 8 years of re

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Senior IT Project Manager (Govt Education Domain) Location: Jackson, MS (Remote) Duration: Long term Position type: Contract Responsibilities Manage IT Projects to include defining projects, tracking progress and status reporting Establish and maintain Project Management Standards Develop a co

SpryPoint seeks a Project Manager to lead enterprise SaaS software implementations in the utilities sector.This role requires engaging directly with clients to ensure successful project delivery, necessitating a strong background in project management and a commitment to customer success.With a remo

Chisw is seeking a Middle/Senior Project Manager to lead software development projects with a focus on results delivery.The ideal candidate will have at least 3 years of project management experience, knowledge of PMBOK, and proficiency in tools like MS Project and JIRA.This role offers flexibility