Inspector jobs in Anaheim, California - Page 2Create job alerts

Job Description Quality Inspector Position Summary We are seeking a Quality Inspector to perform inspection activities on purchased and manufactured parts, assemblies, and final deliverable units. This role requires the ability to interpret engineering drawings, perform First Article Inspections (FAI) using AS9102, document nonconformances, and use CMM and standard inspection equipment to ensure product compliance. Schedule: 6am-2:30 PM w/ OT, including some Saturdays. Pay: up to $27/hr Key Responsibilities • Perform receiving, in-process, final, and shipping inspections, • Create First Article Inspections (FAI) using AS9102 forms, • Inspect complex parts using CMMs and precision measuring equipment, • Interpret engineering drawings, process specifications, and customer requirements, • Document nonconforming material through NCRs and support disposition, • Maintain inspection records and scan quality documentation into the ERP system, • Support calibration activities by managing inspection equipment and coordinating recalibration, • Work closely with manufacturing, quality, and external calibration providers, • Train to become an FAA ODA unit member (as required) Qualifications • High school diploma or equivalent, • Minimum of 2 years of inspection, machinist, or technician experience, • Experience with GD&T, • Proficiency using precision measuring tools (micrometers, calipers, pin gauges, CMM, Romer Arm, etc.), • Strong written and verbal communication skills, • Experience in a calibration environment preferred Physical Requirements & Work Environment • Ability to lift up to 35 lbs occasionally, • Combination office and manufacturing floor environment, • Moderate noise levelCompany DescriptionMarquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities. Marquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path. Apply with us today!Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities.\r\n\r\nMarquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path.\r\n\r\nApply with us today!

Job Description MUST HAVE experience in an Aerospace manufacturing environment with AWS Welding Inspection experience. Quality AS9100 Aerospace Manufacturing Inspector/ CMM Hexagon, Verisurf experience. Must have experience with Faro or Hexagon Arm Inspection Machine This position is for a quality control inspector for an AS9100D Aerospace manufacturing company. Create inspection reports including AS9102 inspection reports and bubble drawing inspection documents. Experience with Verisurf software is required. ABC Sheet Metal / Steeldyne Industries located in Anaheim California. We currently have an exciting opportunity for a AS9100 Quality Aerospace Inspector for in process inspection of fabricated parts. Parts consist of welded, fabricated and machined assemblies. Ideal candidate will utilize inspection plans, CMM Arm, engineering drawings, process specifications, and customer documents to inspect products to determine conformity to the established requirements. Exercise responsibility for decisions as to the quality and usability of products based on obtained organizational knowledge, performance specifications and engineering drawings. Performs mechanical / electrical inspection work in two basic areas; In-process inspection and final inspection; • Create AS9102 Inspection reports., • Plans and performs detailed inspections of mechanical, metal and composite materials, parts and assemblies using precision measuring equipment such as calipers, micrometers, dial indicators, depth gages, optical comparators, and height gages., • Performs First Article Inspections (FAI) and generates FAI reports., • Performs in-process and final inspections., • Conducts process audits and area surveillance as directed by supervision., • Performs supplier source inspection when required., • Experience with fasteners installation and inspection requirements., • Must have experience with operating Faro Arm and Laser Tracking inspection equipment using Verisurf programs., • Clearly presents written descriptions of inspection results including deviations from engineering requirements., • May interact with and provide responses to company management and customer Quality Assurance representatives during audits and review of Company inspection and calibration activities., • Record accurate and concise descriptions of nonconforming conditions identified during inspection of product utilizing computer applications and databases., • Proficient in interpreting mechanical drawings and specifications., • May interact with and provide responses to regulatory agencies and customers during their audits., • May coordinate the procurement of standard materials, services and parts for inspections., • Performs and coordinates calibration activity related to mechanical inspection equipment., • Requires an extensive knowledge of inspection procedures, processes, devices and aids in a manufacturing environment as well as a wide and comprehensive knowledge of inspection concepts and principles including the ability to read and understand complex engineering drawings, specifications, procedures and manuals. Job Qualifications • Typically requires an associate’s degree, trade school certificate, military training, or equivalent in quality inspections or certification by a professional group such as ASQ or AWS, and three or more years of progressive experience in mechanical inspections and calibration., • May substitute additional experience in lieu of formal education and training., • Must possess: (1) ability to read and understand engineering drawings and specifications, and perform mathematical computations; (2) good communication skills to effectively interface with all levels of employees including management; (3) ability to interpret complex information and respond to a variety of complex issues; (4) ability to maintain the confidentiality of sensitive information; and (5) good computer skills; (6) Experience operating Faro Arm and Laser Tracking inspection equipment; (7) Experience in Systems Application Products (SAP) is desirable. Ability to work independently or in a team environment is essential as is the ability to work extended hours as required., • Must be able to adapt to various working conditions., • Experience with AS9100 and ISO 9001, DOE quality assurance program requirements are desirable. Performs other duties when assigned. ESSENTIAL FUNCTIONS: Operate a Faro and Hexagon CMM, Able to read documents, schematics and blueprints; operate a personal computer (Outlook, Word, Excel); verbally communicate with other company employees, suppliers and customers. Company DescriptionSteeldyne Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products. Servicing OEM's and end-users in the following industries: Aerospace Medical Defense Packaging Building Materials & Construction Electrical Equipment & Electronics Commercial Display Oil & Gas Transportation Heating & Cooling Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products.\r\n\r\nServicing OEM's and end-users in the following industries:\r\n Aerospace\r\n Medical\r\n Defense\r\n Packaging\r\n Building Materials & Construction\r\n Electrical Equipment & Electronics\r\nCommercial Display\r\n Oil & Gas\r\n Transportation\r\n Heating & Cooling\r\n\r\n\r\n

Job DescriptionDescription: Cristek is a Qnnect Company, a portfolio company of Arcline Investment Management, with revenues above $80 million and ~350 employees across multiple locations. Cristek manufactures electrical connectors, cable assemblies, harnesses, and related electro-mechanical products, and holds multiple quality certifications including AS9100 & ISO 9001. Cristek, established in 1985, is headquartered in Anaheim, CA with divisions in North Billerica, MA and Minden, NV. SUMMARY OF FUNCTIONS Maintains quality standards by approving incoming materials and recording quality results. Analyzing information, reporting research results, documentation skills, promoting process improvement, safety management, managing processes, manufacturing methods and procedures. DUTIES AND RESPONSIBILITIES • Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting unacceptable materials., • Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database., • Keeps measurement equipment operating by following operating instructions, calling for repairs., • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Involves working with Engineering and other departments to evaluate products and report results., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Accomplishes quality and organization mission by completing related results as needed., • Other duties as assigned.Requirements: EDUCATION AND EXPERIENCE • High School Diploma or equivalent, • Minimum of 2-3 years inspection experience. Experience working with electrical harnesses and/or connectors is preferred. Working knowledge of using video measuring systems is desirable., • Should be familiar with AS9100 and/or ISO 9001., • Must be proficient with Microsoft Office applications (Word, Excel, Outlook), • Must have a good understanding of Geometric Dimensioning & Tolerancing (GD&T) and use of vision systems and/or coordinate measuring equipment., • Must be proficient working with basic precision measuring instruments such as calipers, micrometers, dial/digital indicators, height gages, thread gages, pin gages, etc., • Must have experience performing first article inspection in accordance with AS9102 or equivalent., • Must be comfortable working with binocular microscopes for extended periods, • Must be able to pass Visual Acuity requirements (color, depth perception and field of vision), • Ability to read, comprehend and follow verbal and written instructions., • Must follow strong safety standards, • Must possess attention to detail, • Strong interpersonal skills and ability to work in a team., • Ability to work independently, focus, organize work, and complete assignments on time., • Sitting and standing for long periods. This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. At Cristek, we strive to create an inclusive and supportive work environment, and our benefits package reflects this commitment. Some of our benefit offerings include: • Insurance benefits: We provide our employees with access to comprehensive medical, dental, and vision insurances to ensure they can prioritize their health and well-being., • Paid Time Off (PTO): We believe in the importance of work-life balance, so we offer generous PTO allowances that accrue with each pay period so that our employees can rest and recharge, spend time with family and friends, or pursue personal interests., • Paid Holidays: We recognize the importance of spending time with loved ones during holidays, so our employees receive paid holidays to celebrate and enjoy these moments., • Growth Participation Units (GPUs): We provide growth participation units (GPUs) to our employees, which represent a share of the company's growth and success. Our GPUs are issued to all employees and as we increase the value of our business, they grow in value as well. When the private equity firm that currently owns us sells the company, GPUs will be paid out, with all employees sharing in the profits from the sale., • 401(k) Matching: We offer up to 4% of 401(k) matching to help our employees save for their future., • Short-Term & Long-Term Disability Insurances: We want to ensure that our employees are protected in case of unexpected circumstances, and provide short-term & long-term disability insurances, entirely employer paid., • Tuition reimbursement: We believe in continuous learning and development and offer tuition reimbursement to support our employees' educational goals. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: Company: Kilter Termite and Pest Control Job Type: Full-Time Location: Orange Area Compensation • Annual earnings range: $70,000 – $135,000, • Weekly pay via direct depositJob Overview Kilter Termite and Pest Control is seeking driven, goal-oriented professionals to join our high-performing team. If you're a licensed Branch 3 Field Representative ready to take your career and earnings to the next level, we want to hear from you! Responsibilities As a Termite Sales Inspector, you will: • Represent the company with professionalism and punctuality, • Conduct thorough property inspections, • Generate leads, referrals, and self-sourced sales opportunities, • Follow up promptly on pending termite and pest control sales, • Recommend treatment plans and provide detailed estimates for services and repairs, • Ensure production is completed to the highest standards, • Continuously learn and adapt to improve performanceWhat You Bring To thrive in this role, you should be: • Customer-focused and personable, • Coachable and eager to learn, • Results-driven with a confident, positive attitude, • Comfortable with a structured sales process, • Skilled at building rapport with diverse personality types, • Proactive in closing sales and achieving targets, • Self-motivated and able to work independently, • Physically capable of lifting 35–40 lbs regularly, • Willing to work in crawl spaces, attics, and on laddersSchedule, • Full-time, • Monday through Friday, • Some Saturdays requiredBenefits, • Company vehicle (all expenses paid), • Paid training, • Company cell phone and uniforms, • 401(k) with company match, • Medical, dental, and vision coverage, • Paid vacation, holidays, and personal time off, • Career stability and advancement opportunitiesRequirements, • Valid Driver’s License with a clean driving record As a Sales Inspector at Kilter Termite and Pest Control, you’ll be instrumental in providing expert solutions and building trusted customer relationships. This role requires thorough property inspections—including attics and crawl spaces—and the ability to recommend effective treatment plans tailored to each client’s needs. Strong communication and problem-solving skills are essential. To be considered for this role, candidates must have: • Minimum 1 year of sales experience in the termite and pest control industry, • Active SPCB Branch 3 Field Representative License (required), • Proven success in in-home sales and customer engagement, • Valid driver’s license with a clean DMV record, • Ability to pass a background check and drug screening, • Professional appearance and demeanor

Job Description Overview Opportunity: Public Area Attendant Maintain cleanliness of public areas in accordance with established guest service and sustainability standards. Your Growth Path Room Inspector – Housekeeping Supervisor – Executive Housekeeper Your Focus • Clean all hard and textile surfaces and restrooms within public space; and respond to guest room requests., • Ensure internal windows and doorways are free of fingerprints and smudges., • Ensure that furniture and hard surfaces of public areas are clean and organized., • Ensure floors are free of debris., • Clean any carpet spots., • Ensure that all surfaces of elevators are clean and free of debris., • Empty all waste receptacles in public areas., • Clean employee break room and employee restroom., • Utilize chemicals according to directions and gain familiarity with all Material Safety Data Sheets., • Follow procedures concerning protection against blood borne pathogens., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and follow MSDS and OSHA standards., • Perform other duties as requested by management. Your Background and Skills • High school diploma or equivalent., • Previous related experience preferred. Work Environment and Context • Work schedule varies and may include working on holidays and weekends., • Requires standing for extended periods, walking, pushing, lifting up to 25 pounds, bending and reaching, stooping, kneeling, or crouching. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Role The In-Process Inspector is responsible for performing visual inspections of PCB panels in-between the manufacturing processes for defects or deviations per standard operating procedures and guidance from the Team Leader. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do • Reads and interprets standard operating procedures and traveler to verify lot number and panel quantity; ensures that the previous operation was completed, signs, and dates the traveler, • Performs a variety of repetitive visual and mechanical in-process inspection to ensure products comply with order specification and conformity to specified quality standards, • Inspects holes, thickness, markings, and conductive patterns using required equipment and confirms that product is defect-free, • Stamps and dates travelers; scans job in and out of MRP, • Ability to read and interpret documents such as standard operating procedures, traveler instructions, technical requirements, blueprints, quality processes and safety rules in English, • Ability to detect PCB defects, • Knowledge of flex and rigid-flex printed circuits, IPC-6012, IPC-6013, and military specifications such as MIL STD P-55110, P-50884, and P-31032, • High School Diploma or GED (Preferred) Schedule • Monday through Friday, • 2nd Shift: 4:00pm to 12:30am, • Full Time / Permanent Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description The Inspector I performs receiving, in-process, and final inspection on electronic systems, electromechanical assemblies, or mechanical assemblies and subassemblies. Accepts, rejects or reworks defective units or systems. Determines or assists in determining methods, sequences and procedures necessary for inspection. The position requires communication between production, project management, shipping/receiving, and quality management. Duties and Responsibilities: § Perform all tests, inspections and measurements required by pre-defined instruction § Conduct inspection of incoming raw materials, first article parts, in-process materials, and finished goods § Inspect both work in progress and completed tasks for compliance in accordance with the Purchase Order Instructions, Design Drawings and/or a Quality Control Plan, Safety, and contract requirements § Help perform periodic stock inventories and prepare material requisitions for replacement items as required § Perform other quality-related tasks as assigned by the Quality Manager Requirements § 0-5 years of experience working in a similar role § Experience in Quality Control/Assurance § Must be able to read and interpret schematics, blueprints, specifications, etc per ASME Y 14.5 and ASME Y 14.100 § Experience using basic mechanical/electrical inspection/test tools (calipers, micrometers, multi-meters, surface plate, height gauges, comparator, gauge blocks, thread gauges, etc.) § Experience working in an ISO 9001/AS9100 QMS environment § Conduct 1st article inspections per AS9102 § Experience in aerospace electro/mechanical quality control inspection § Experience working with FAA Part 21 requirements performing and presenting parts to a DMIR or DAR for purposes of FAA Conformity Inspection § Previous experience working with an ERP or MRP § Proficient computer skills (MS Word, Excel, Outlook) § Must have a clear understanding of document types that are impacted by Configuration Control Changes; e.g. Drawings & Specifications, Procedures and Work Instructions § Ability to use a computer for inputting and storing data in specific folders Benefits The starting pay range for this position is $19.00 - 24.00 per hour however, base pay offered may vary depending on skills, experience, job-related knowledge and location.

Job Description The Industrial Hygienist is responsible for independently conducting environmental and hazardous materials monitoring, surveying, and sampling at residential, commercial, public, and industrial job sites. This role supports projects involving water and fire damage, demolition and renovation activities, indoor air quality concerns, and reported environmental complaints. The Industrial Hygienist evaluates conditions related to asbestos, lead-based paint, microbial contamination, and other environmental health hazards while ensuring full compliance with all applicable regulations. This position requires strong technical expertise, sound professional judgment, and the ability to work independently and accurately in the field. As a primary on-site representative of Titan Environmental Solutions, Inc., the Industrial Hygienist is expected to deliver a high level of professionalism and customer service, communicate technical findings clearly, and arrive on site within scheduled appointment times. The role requires flexibility for travel, night and weekend work, and variable job site conditions. Titan Environmental Solutions, Inc. prefers candidates holding Certified Asbestos Consultant (CAC) credentials, though qualified Certified Site Surveillance Technicians (CSSTs) with relevant field experience are also encouraged to apply. Requirements • Perform environmental and hazardous materials assessments at:, • Residential properties, • Commercial and private buildings, • Public and state-owned facilities, • Industrial sites, • Conduct sampling and monitoring activities related to:, • Water damage and fire damage incidents, • Hazardous material disturbances, • Demolition and renovation activities, • Elevated humidity and potential microbial growth conditions, • Perform surveys and assessments for:, • Asbestos-containing materials (CACs may lead and sign regulated projects), • Lead-based paint and lead hazards, • Mold, fungal, and bacterial contamination, • Indoor Air Quality (IAQ) complaints and investigations, • Evaluate client-reported environmental concerns and determine appropriate assessment methodologies, • Independently manage assigned field projects while adhering to Titan Environmental Solutions’ surveying and reporting standards, • Complete an average of up to six (6) limited surveys per day, depending on scope and site conditions, • Accurately collect samples, maintain proper chain-of-custody documentation, and submit field documentation promptly after each project, • Prepare clear, concise, and technically accurate written documentation and reports, • Communicate technical findings effectively, both verbally and in writing, to clients, contractors, and internal team members, • Maintain professionalism, punctuality, and a customer-focused approach at all job sites, • Arrive on-site within scheduled appointment windows outlined in work orders, • Follow all Titan Environmental Solutions safety policies and established field methodologies, • Comply with all applicable state, federal, and local environmental, health, and safety regulations Travel & Schedule Requirements • Frequent driving throughout Southern California to job sites and client meetings, • Willingness to travel out of town as project needs require, • Availability for night and weekend work, as needed Required (One of the Following): • Valid California Real ID Driver’s License with a clean DMV driving record, • Ability to pass a background check (Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.) • Ability to lift and carry up to 50 pounds, • Ability to climb ladders and stairs and access elevated or confined spaces, • Ability to crawl in tight or restricted areas to access building components, • Ability to stand, walk, bend, squat, kneel, sit, and climb for extended periods, • Ability to work in a variety of environmental conditions, including construction and industrial settings, • Strong time and priority management skills, • Self-motivated with the ability to work independently in the field, • Excellent technical writing and documentation skills, • Strong verbal communication skills and professional demeanor, • Proficiency with Microsoft Office and internet-based systems, • High attention to detail and accuracy, • Strong work ethic and accountability, • Ability to perform complex tasks and manage multiple priorities simultaneously, • Ability to perform effectively under high-stress and time-sensitive conditions, • Strong conflict management and negotiation skills, • Ability to work collaboratively in a team environment and across the organization Compensation & Pay Transparency (California Compliance) Titan Environmental Solutions, Inc. reasonably expects to pay between $38.00 and $45.00 per hour for this position. Compensation will be determined based on certification level (CAC vs. CSST), experience, and job-related qualifications, in compliance with California pay transparency laws. Eligible employees receive paid holidays, paid vacation, and access to group health, dental, and vision insurance, as well as a 401(k) retirement savings plan, plus any applicable state mandated insurance benefits. Holiday and vacation eligibility, accrual, and scheduling follow company policy and plan documents.

Job DescriptionTwo Career Paths, One Mission: Build and Validate Advanced RF Hardware Choose between two complementary roles supporting RF and microwave systems for aerospace, defense, and satellite communications. Role 1: Layout Engineer I – RF (Compensation: $80K – $95K) A day in this role Morning: You translate high‑frequency circuit intent into a clean, manufacturable PCB layout for harsh environments. Midday: You review stackups, materials, and impedance controls with manufacturing. Afternoon: You validate that your layout choices protect performance and reliability from prototype through production. What you’ll do • Convert high‑frequency designs into robust, production‑ready hardware for cutting‑edge RF/microwave applications., • Safeguard performance, reliability, and manufacturability for use in extreme operating conditions. What you bring, • 3+ years of hands‑on RF electronic hardware layout and design experience., • Applied knowledge of RF layout best practices, manufacturing techniques, and test fundamentals., • Working knowledge of IPC-610, MIL-STD-883, MIL-STD-750, MIL-STD-1580, and relevant ISO/AS requirements., • Execute receiving inspections and document outcomes on forms, records, and an electronic log., • Match received items to Procurement Data Packing Slips and Material Certification Compliance., • Perform First Article and dimensional checks per engineering drawings/specs using precision measurement tools., • Verify plating with Production by requesting plated parts be test before acceptance., • Maintain discrepant material, issue Rejection Reports, and enter results into SAP for MRB reviews., • Partner with the Manufacturing Engineer on production issues and communicate discoveries., • Coordinate with Purchasing to review/discuss First Article results. What you bring, • 1–2 years of quality control experience., • IPC-A-610 (PCBA visual inspection), IPC-A-620 training in Quality Inspection., • Knowledge of MIL-STD-883, AS9102, MRB process. How to Apply, • Call our office at (866) 949-4894, • Administrative, • Light Industrial, • Skilled Trades

Job DescriptionDescription: At American Equipment Holdings, we are one of the nation’s leading providers of overhead crane solutions. Our success is built on a simple philosophy: take care of our customers and take care of our people. We offer competitive wages, comprehensive benefits, and opportunities for growth and development. Join one of the fastest-growing companies in the industry and be part of a team that values integrity, safety, and excellence. Position Summary We are seeking a detail-oriented and experienced Crane Surveyor to join our team. This role is critical in ensuring the safety, compliance, and operational readiness of overhead crane systems. The Crane Surveyor will conduct thorough inspections, document findings, and provide recommendations for maintenance, repairs, and upgrades in accordance with OSHA, ANSI, and OEM standards. Key Responsibilities • Conduct detailed surveys and inspections of overhead cranes, hoists, and related lifting equipment., • Evaluate structural, mechanical, and electrical components for wear, damage, and compliance., • Document inspection results, deficiencies, and recommendations in clear, professional reports., • Collaborate with service technicians and project managers to develop maintenance and repair plans., • Ensure all inspections meet OSHA, ANSI, and OEM standards., • Identify and assess risk factors related to crane operation and maintenance., • Provide expert guidance on crane lifecycle management and modernization opportunities., • Communicate findings and recommendations to customers in a clear and professional manner., • High school diploma or GED required; technical training or certifications preferred., • Minimum 1 years of experience in crane inspection, maintenance, or related field., • Strong understanding of mechanical, structural, and electrical crane systems., • Familiarity with OSHA and ANSI standards for overhead lifting equipment., • Ability to read and interpret technical drawings, schematics, and OEM manuals., • Excellent attention to detail and documentation skills., • Strong communication and customer service abilities., • Certified Crane Inspector (CCI) or equivalent certification., • Experience with inspection software and digital reporting tools., • Full-time, Monday to Friday, • Three Medical Plan offerings through Cigna, • FSA & HSA options, • Dental and Vision Insurance, • Short-Term & Long-Term Disability, • Life and AD&D Insurance, • 4% 401(k) Match, • 80 Hours PTO, • Company-provided PPE

Job Description Build the systems that test the technology shaping the future of RF and microwave communications. About the Company Mission Microwave Technologies was founded in 2014 to revolutionize the next generation of Solid-State Power Amplifiers (SSPAs) and Block Upconverters (BUCs). We leverage advanced GaN transistors, proprietary power-combining techniques, and innovative full-system designs to deliver the industry’s most efficient, compact, and lightweight high-power SSPAs. With more than 100 years of combined leadership experience supplying high-performance, high-reliability RF solutions to commercial, military, and space customers, Mission Microwave has grown rapidly over the past decade and is backed by a private equity firm committed to long-term innovation and expansion. We are proud to be ranked #23 on Fortune’s Best Workplaces in Manufacturing & Production and to have been recognized as a Great Place to Work® since 2022. Mission Microwave is headquartered at 6060 Phyllis Drive, Cypress, CA 90603. Summary: The Quality Assurance Inspector plays a critical role in ensuring Mission Microwave products meet the highest standards of workmanship, configuration control, and customer compliance. This position is responsible for performing visual, mechanical, dimensional, and electrical inspections of components, subassemblies, and finished assemblies to verify conformance to engineering drawings, specifications, and internal quality requirements. The ideal candidate is detail-oriented, disciplined, and committed to protecting product integrity in a fast-paced, high-precision aerospace and defense environment. Essential Duties and Responsibilities: • Review work orders and inspection packages to confirm correct part numbers, drawings, revisions, change orders, and required approvals., • Verify that all prior manufacturing operations have been properly completed and accepted., • Ensure required process specifications and workmanship standards are documented and followed., • Conduct visual inspections to evaluate physical condition, workmanship quality, and damage., • Perform dimensional and mechanical inspections using calipers, micrometers, scales, and other precision measurement tools., • Conduct fluorescent light and related inspection testing as required., • Verify configuration, record compliance data, and confirm test limits against specifications., • Identify and escalate production, material, or documentation discrepancies to Quality and Production leadership., • Maintain accurate inspection records and documentation to support traceability and audit readiness., • Complete assigned surveillance audits., • Provide mentorship and training to junior inspectors as needed., • Collaborate cross-functionally with Engineering, Production, Quality Engineering, and Management to support quality objectives., • Support additional quality-related initiatives as assigned. Qualifications: • Minimum of 2 years of quality inspection experience in manufacturing, aerospace, defense, or related technical environment., • Ability to read and interpret:, • Engineering drawings and schematics, • Work instructions and procedures, • Engineering change notices, • Work orders and inspection documents, • Working knowledge of dimensional inspection tools and measurement techniques., • Familiarity with weld inspection basics preferred., • Ability to verify configuration compliance and present documentation to customers when required., • Experience comparing test data against specification limits., • Proficient with Microsoft Office and Windows-based systems., • Strong attention to detail with a high level of ownership and accountability., • Ability to work independently with minimal supervision in a fast-paced environment., • Professional discretion and respect for confidential information. Education, Experience and/or Certifications: • High school diploma or equivalent required., • Technical certificate, trade school, or college coursework preferred., • Minimum of 2 years of direct inspection experience required. This position requires U.S. Citizenship. At Mission Microwave Technologies, we believe we put our best work forward when our employees bring diverse ideas together. We are proud to be an equal opportunity workplace and are committed to equal employment opportunity regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, genetic information, veteran status, gender identity or expression, sexual orientation, or any other characteristic protected by applicable federal, state, or local law. In addition, Mission Microwave Technologies will provide reasonable accommodations for qualified individuals with disabilities. If you have a disability or special need, please let us know how we can better accommodate you. At Mission Microwave, you don’t just take a job; you step into a mission that matters. We design and build world-class RF and microwave solutions that power the technologies behind defense, space, and next-generation communications, and we do it with precision, purpose, and pride. Here, your ideas are heard, your expertise is trusted, and your impact is visible from the first design review to the moment our products perform in the most demanding environments on Earth and beyond. You’ll work alongside intelligent, driven people who care deeply about craftsmanship, collaboration, and doing the right thing, in a culture that values growth, integrity, and human connection as much as technical excellence. If you’re looking for a place where your work truly matters, where you can stretch, learn, and build something extraordinary with a team that has your back, Mission Microwave is where your next chapter begins. Apply Now.

Job Description Autonomous Medical Devices Incorporated (AMDI) is a California-based company employing a world class team of engineers, scientists, clinicians, manufacturing and quality/regulatory experts dedicated to the development and manufacture of best in class diagnostic devices using innovative technology, factory automation, and cloud connectivity. AMDI is headquartered in Santa Ana, CA where it manufactures the Fast PCR Mini Respiratory Panel in an ISO:13485 / MDSAP certified 110,000 square foot facility. Summary of Position Are you a detail-driven professional with a passion for quality? We are seeking a Senior Quality Inspector to join our team! As a key member of the Quality team, you will play a critical role in ensuring that our products meet the highest standards of safety, effectiveness, and compliance. The Senior QC Inspector will be a hands on individual that will perform inspection and testing of incoming materials, in-process samples and finished products to ensure the materials and products conform to specifications and requirements. Communicate with team and management promptly on quality related issues. Initiate Non-conformance Report (NCR) and assist with the calibration and preventive maintenance program of equipment/instruments. Location: This is an onsite position located at our Santa Ana, CA office. Candidates living within a 25 mile range preferred. Essential Duties and Responsibilities • Perform visual, dimensional, and functional inspections and/or testing across all components, subassemblies and finished medical device products using all applicable tools and equipment to ensure conformance with design specifications., • Archiving receiving inspection and other QC records in Oracle PLM., • Perform job functions in compliance with established work instructions and adherence with SOPs, including recording traceable information on device history records., • Ensuring all necessary samples are pulled and tested per procedures requirement., • Determine acceptability and/or identify defective raw materials and finished products following established procedures and specifications., • Provide immediate feedback to production line and immediate leadership on all quality related problems., • Support the calibration and preventive maintenance program., • Initiate Non-conformance Report (NCR) as needed., • Additional projects and/or duties as assigned Qualifications Required for Position • High school Diploma or equivalent required. Associate degree or higher preferred., • A minimum of 8 years of inspection and testing experience in GMP environment, preferably in the medical device or pharmaceutical industries, is required., • Proficient in a wide range of dimensional inspection techniques/equipment (caliper, micrometer, drop indicator, pin gauge, CMM, Keyence, optical inspection system) with good hand eye coordination and high manual dexterity., • Contribute to and support the development of accurate and rugged inspection procedures., • Able to clearly describe and convey nonconformance issues., • Experienced in a fast-paced environment and able to balance and prioritize workload to support production schedule., • Ability to train others in methodology and procedures., • Ability to serve as a role model to other workers/colleagues in proper execution of day-to-day inspection duties as well as a guide in the understanding of operations and quality standards., • Proficient computer skills in Microsoft Office Excel and Word, manufacturing software, QMS software, etc., • Must be hands on and ability to as needed perform physical work pertaining to inspection, • Tech-savvy and able to learn new software quickly., • Ability to gets things done without perfect resources, is innovative, and works with a sense of urgency., • Ability to be flexible and willing to do what it takes to support company and department goals., • Results oriented – drives progress & excellence., • Ability to work independently with minimal supervision., • Effective interpersonal and communication skills., • Well organized and attentive to details., • Contributes to a collaborative and inclusive work environment., • An individual with high standards, takes ownership, and is invested in the outcome, is perferred., • Ability to be proactively helps others, stays positive and has a good sense of humor. Work Environment • The QC Inspector will work in the QC Lab, and will go to the warehouse and production floor from time to time., • While performing the duties of this job, the employee frequently is required to use hands to handle or feel and reach with hands and arms., • The employee is occasionally required to stand and walk or bend and twist. The estimated base salary range for this position is $22.00 - $28.00 hourly. If the level of the role changes during the hiring process, the applicable base pay range may be updated accordingly. The actual base salary offered will be determined by several factors, including, but not limited to, the applicant's qualifications for the position, years of relevant experience, distinctive skills, and level of education attained. Autonomous Medical Device Incorporated offers a comprehensive compensation and benefits package to eligible employees including: • Company provided lunch to all employees when working at one of AMDI’s on-site locations., • 401(k) match, • Health insurance, 100% paid for by employer including: Medical, Dental, Vision & Life Insurance, • Competitive vacation, sick days & paid holidays, • Tuition reimbursement, • Casual dress code, • Employee discounts on activities such as theme parks, movie theaters, hotels, rental cars, etc., • Monthly company-wide socials and activities Autonomous Medical Devices Incorporated (AMDI) will not accept unsolicited resumes from any source other than directly from a candidate. An Agency must obtain advance written approval from AMDI’s internal Human Resources team to submit resumes only in conjunction with approved valid fully executed contracts. Our commitment to an inclusive workplace: We are an equal opportunity employer and encourage people from all backgrounds to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status, or any other protected characteristic under federal, state, or local law. Powered by JazzHR uHF1TdTuDM

Job Description Step into a rewarding career with Ecola Services, Inc. as a full‑time Termite Annual Inspector serving the Orange County, CA area. This role offers a stable, full‑time opportunity for a professional who excels in customer service, inspections, and sales, while helping homeowners protect their investments from termite damage. This position offers competitive pay ranging from $21.00 to $25/hour PLUS commission! Benefits and Perks: • Health, • Dental, • Vision, • Paid time off (PTO), • Life insurance, • Sales opportunities, • Commissions YOUR DAY As a Termite Annual Inspector, you will start your day by preparing your company vehicle and ensuring your tools, equipment, and PPE are ready for service. You will travel to customer properties to perform annual termite inspections, identify termite activity, assess damage, and determine appropriate treatment or prevention solutions. Throughout the day, you will educate customers on inspection findings, treatment options, extended warranty coverage, and preventive measures. You will actively look for opportunities to add value through additional services and add‑on sales, while maintaining a professional, consultative sales approach. You will perform termite treatments when applicable using approved methods such as electro‑gun, chemical injections, microwave systems, and other manufacturer‑approved techniques, following all label instructions, safety standards, and regulatory requirements. Re‑treatments for re‑infested areas will be handled using the best method for each situation. Your responsibilities will include preparing accurate inspection and treatment reports in compliance with SPCB requirements and company policies, typing reports on a company‑issued tablet, taking photos when needed, and communicating findings to management or technical leadership. You will confirm appointments daily with the office team and customers, collect payments when required, and follow up with unpaid annual customers to obtain payment and schedule service. Responding to existing customer concerns, participating in monthly training and safety programs, maintaining all licensing and certification requirements, and following company safety procedures will be part of your routine. At each stop, you will pass out flyers to nearby homes, ask for referrals, and request online reviews to help grow our customer base. YOUR SCHEDULE As a full‑time Termite Annual Inspector, you will work a consistent schedule serving customers throughout the Orange County, CA area. Routes and daily assignments may vary based on service needs, but this position offers stable, full‑time employment as part of our dependable field service and sales team. REQUIREMENTS FOR A TERMITE ANNUAL INSPECTOR • High school diploma or equivalent, • Valid driver's license with a clean driving record, • Ability to maintain all required licenses and continuing education units (CEUs), • Branch 3 Field Representative and Applicator License (or ability to obtain and maintain), • Electro‑gun training and certification as required by the manufacturer, • Strong knowledge of termite inspection, identification, and treatment methods, • Sales aptitude with a customer‑first, consultative approach, • Math aptitude for measuring, mixing, and applying treatments, • GPS/map reading and navigation skills, • Strong written and verbal communication skills, • Exceptional customer service and relationship‑building skills, • Organization and time‑management abilities, • Strong safety awareness and compliance with PPE and regulatory standards, • Prior termite, pest control, inspections, or related sales experience preferred OUR MISSION At Ecola Services, Inc., we believe success is a team effort-we build the plan and work it together. As a leader in both non‑chemical and traditional termite and pest control solutions, we never walk away from a challenge because we have every tool in the toolbox to get the job done right. Our culture is driven by growth and opportunity. We encourage our team members to push boundaries, develop professionally, and build long‑term careers. When you join Ecola, you're not just getting a job-you're joining a company that values your potential and rewards your hard work with training, support, and meaningful opportunity. READY TO APPLY? Take the next step now. Our mobile‑friendly application makes it easy to get started-apply today and begin your journey with Ecola Services, Inc.

Job Description QUALITY INSPECTOR Orange, CA Mon –Fri 7 am to 4 pm $19.00-21.00/hour JOB DUTIES: • Perform functional electrical test, visual or mechanical inspection in operations such as incoming, in-process, final acceptance and special testing., • Following general inspection guidelines, conduct critical, non-routine visual, dimensional, mechanical and electrical tests on a variety of products., • Monitor product quality and reject parts not meeting defined quality standards., • Perform product and system audits in a variety of departments and inspections., • Support other Quality functions as needed, such as QC shipping audit, Document Scanning, Incoming Inspection etc. ESSENTIAL REQUIREMENTS: • Vision must be adequate to conduct accurate inspections, with or without microscope., • Must be able to use microscope and tweezers during most of work shift., • Must be able to sit for long periods of time while working (approximately 2/3 of shift)., • Must be able to lift up to 25 lbs. on a regular basis daily., • Must be able to follow verbal and written directions with minimal supervision., • High school diploma or equivalent with 3-5 years of related experience required., • Must be familiar with PC, MS Word and Excel. PHYSICAL REQUIREMENTS: • Ability to use microscope throughout shift to inspect parts., • Excellent manual dexterity and hand/eye coordination to manipulate ultra-miniature, fragile parts with tweezers throughout shift., • Duties will occasionally necessitate reaching overhead, standing, walking, bending, balancing, stooping, climbing stairs, pushing a cart, lifting and carrying. HAZARDOUS MATERIAL HANDLING: Employees in this classification are required to work with hazardous materials, including: Isopropyl Alcohol; Developer; Table Top Cleaner Familiarization Training in the safe use of these materials and appropriate safety rules/PPE is required, plus annual refresher training.

Job DescriptionBenefits: • 401(k) As part of a team, you will maintain and advance quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication, leadership skills, and knowledge of CAD programs and blueprint reading are a must, as well as a keen attention to detail. Job Description • Approve in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor., • Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirm re-work., • Document inspection results by completing reports and logs; summarizing re-work and waste; input data into quality database., • Keeps measurement equipment operating by following operating instructions; call for repairs., • Maintains safe and healthy work environment by following standards and procedures; comply with legal regulations., • Updates job knowledge by participating in educational opportunities; read technical publications- including ISO 9001-2015 and AS9100D standards., • Accomplishes quality and organization mission by completing related results as needed., • Advance our quality system under ISO 9001-2015 and AS9100D requirements., • Fill in gaps in the production process.Skills and Qualifications Basic Math Skills, Computer Skills (knowledge of SolidWorks is a plus), Analyzing Information, Reporting Research Results, Documentation Skills, Promoting Process Improvement, Safety Management, Managing Processes, Manufacturing Methods and Procedures, Supports Innovation, CAD, Quality Engineering, Operations Research Physical Demands • Moving parts, machine noise, • Able to walk/stand for hours at a time, • Ability to lift/push/pull/carry up to 100 pounds independently., • Use of hands and fingers Starting rate depending on experience. Must be able to work overtime as needed. Shipping bonus eligible based on performance and attendance. Company Description KSR Foam and Technical Products is the leading fabricator of finished reticulated polyurethane/anti slosh foam kits and technical products for a wide range of military, commercial and high-performance applications. We are a small and growing company located in Garden Grove.

Job DescriptionCompany Description () is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description • Perform incoming inspection of medical devices, including visual inspection and dimensional measurement, • Verify an document product compliance with regulatory and company requirements, • Identify and document non-conformance found during inspection, • Participate in investigations related to non-conformance or product quality issues, • Assist with the development and implementation of inspection procedures, • Maintain accurate and up-to-date records of inspection results, • Communicate effectively with team members, supervisors, and other departments as neededQualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. • High school diploma or equivalent, • Experience in quality control related field preferred, • Knowledge of medical devices regulations and standards preferred, • Ability to use measuring tools and equipment, • Detail-oriented with excellent organizational and communication skills, • Ability to work independently and as part of a team This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Overview If You’re the Best at Sales, You Have a Place with the Best in Pests As an Orkin Termite Sales Inspector, you get the advantage of a highly persuasive pitch: top-notch protection from an iconic brand name and the industry leader with almost 125 years of experience. That’s backed by award-winning training that ensures the professionalism and expertise of all Orkin Pros and the Orkin Guarantee that demonstrates our commitment to customer satisfaction. You’ll also have the satisfaction of giving homeowners peace of mind that they’re protecting their most valuable asset. It’s a role that combines your competitive drive and your desire to be part of a talented team. You’ll have the opportunity to maximize your financial potential with high-performance sales skills and contribute to the overall success of the business. And you can earn your way to an annual rewards trip honoring top performers, not to mention chart a path to leadership opportunities. You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics. This includes a company vehicle, competitive pay and a 401(k) program. Not to mention, you’ll receive opportunities to volunteer and give back so that everyone has a safe place to live, work, and play. You can count on a career with the Best in Pests where you’ll work alongside a team that values safety, professionalism, empathy, integrity and innovation in pursuit of our mission to deliver the peace of mind only an Orkin Pro can provide. With Orkin’s award-winning training program, you’ll receive all the tools you need to succeed. That means no industry experience required to start building your career. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession resistant. Ready to start a career with staying power? Apply now! Responsibilities You’ll be responsible for understanding Orkin’s termite protection services and how to make strategic recommendations to customers. By performing 360 inspections from attics to crawlspaces and everything in between, you’ll be able to solve problems and build trusted relationships ensuring homes and families are protected. Adept at listening to needs and clearly explaining practical solutions, you can win over customers with confidence and care. You will… • Prioritize safety in all responsibilities., • Conduct yourself with the utmost professionalism and integrity with customers and coworkers., • Serve as an empathetic problem solver for customers by utilizing the in-depth training provided to recommend the best innovative overall pest solution for each customer's needs., • Achieve goals through prospecting new business and assigned leads—we have a robust advertising budget to provide you with leads., • Schedule sales appointments and meet with potential customers in their homes where you will explain how Orkin’s products and services can give them peace of mind., • Inspect the interior and exterior of the customer’s home—don’t worry, we teach you how!, • Make recommendations to customers based on inspection and issues identified by addressing any questions, explaining the process and setting expectations., • Use the iPad we provide to prepare sales agreements and help you stay organized—we will provide training on this too. We Offer… • Competitive earnings from $60,000 to $100,000 per year and a company vehicle with gas card upon route assignment, • During the initial training period (first 90 days), compensation is set at $23 per hour. Once all required licensure is successfully completed, the position transitions to an exempt compensation structure, which includes a base salary plus commission, • Comprehensive benefits package including medical, dental, vision, maternity, & life Insurance, • 401(k) plan with company match, employee stock purchase plan, • Paid vacation, holidays, and sick leave, • Employee discounts, tuition reimbursement, dependent scholarship awards, • Industry leading, quality, comprehensive training program Why Orkin? • You are interested in an opportunity with career potential in a reliable, recession-resistant industry, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible to commitments, • You value being part of a team, • You want to keep learning, improving and developing as a leader, • You want to join a company that supports the community, • You want a career with a purpose at a mission-driven company that values, • Safety, • Professionalism, • Empathy, • Integrity, • Innovation Qualifications What do you need to be successful? • High School Diploma or equivalent required, • No Experience Required!, • Valid driver’s license required, • Ability to obtain the appropriate pesticide license/certification if required (company paid), • Ability to work in the field independently and interact with our great clients What will my work environment be like? Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Occasionally lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl, • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer #ORK719IND

Job Description Summit Anaheim currently has an open position for a Final Inspector (1st shift). Summit Interconnect is a manufacturer of advanced technology printed circuit boards with a specific focus on complex rigid and rigid-flex product with unique expertise in RF/Microwave applications. Position Summary: The Final Inspector is responsible for inspection of product after processes and at final inspection. This position requires attention to detail, good communication skills, and the ability to read and understand technical requirements of the traveler and blueprint. Qualifications: To perform this job successfully, an individual must have a minimum of three (3) years’ in the printed circuit board industry and must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: • Read, understand, and interpret travelers and drawings provided to assess requirements and special instructions required for jobs., • Inspects product to determine compliance with order specifications and the inspection checklist for conformity to specified standards., • Experience inspecting Flex-Rigid PWBs., • Rework experience., • Inspects product under magnifying tool for opens and shorts in circuit patterns., • Compares size and location of holes to verify conformance to specifications., • Views inside of holes to detect voids or irregular surfaces., • Identifies non-conforming product and its disposition., • Stamps mark of approval or rejection on product or traveler., • Logs job in and out with accurate counts of product., • Records yield data and completes scrap report forms., • Stacks finished boards with separator sheets for transfer to next workstation., • Perform other department or company-related tasks at the direction of the department Supervisor. Education / Experience: • High School Diploma or equivalent., • Three (3) year minimum PWB experience., • Employee is regularly required to sit throughout the shift., • Employee must frequently lift and/or move up to 20 lbs., • Specific vision abilities required by this job include close vision. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Final Inspector is responsible for performing visual inspections of PCB bare boards after completion of all processes per standard operating procedures and guidance from the Team Leader. The Final Inspector also stamps the Group A Lot Acceptance Inspection Sheet, Traveler, or rework instruction as required after completing visual inspections. What You'll Do: Read and interpret standard operating procedures and traveler to verify lot number and panel quantity; ensure that the previous operation was completed, signed, and dated on the traveler • Perform a variety of repetitive visual and mechanical in-process inspections to ensure the product complies with order specifications and conformity to specified quality standards, • Inspect holes, thickness, markings, and conductive patterns using the required equipment and confirm that product is defect-free, • Identify non-conformances and inform the team leader, • Stamps and date travelers, • Experience in PCB final inspection, • Hands-on knowledge of flex and rigid-flex printed circuits, IPC-6012, IPC-6013, IPC-610, and military specifications such as MIL STD P-55110, P-50884, and P-31032, and J STD, • Ability to detect PCB defects, • Ability to read and interpret documents such as standard operating procedures, traveler instructions, technical requirements, blueprints, quality processes and safety rules in English, • 8-hour shift, • Monday to Friday (7:30 AM to 4:00 PM) Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off 6:00 am-2:30 pm PST M-F Overtime likely, possibly including Saturdays Qualifications: • High School Degree, • Quality Control Inspector experience, • Manual and Visual inspection, • NCR (Non Conformance Report) and RFD (Request for Deviation) processing experience, • Blueprint interpretation, • GD&T standard, • Manual Tools: Micrometer, Calipers, feeler gauges, magnifying glass and microscope experience, • CMM (Coordinate Measuring Machine) Inspection experience is a plus, • Familiar with Engine PartsResponsibilities:, • Perform manual and visual inspection on Racing components, • Create and follow up on Non-Conformance Report, • Interpretation of engineering blueprints and technical drawings, • Ability to identify the dimensions based on the nominal and tolerance, • Tool Calibration

Job Description Job Purpose As QC Inspector I, you will be a contributing team member who will be responsible in supporting various aspects of quality control. Duties and Responsibilities • Perform routine inspections of incoming, in process, and finished products for correct identification, traceability, and conformance to approved specifications., • Determine acceptability of raw materials, components, and subassemblies according to standards and internal requirements., • Generate nonconforming material reports, and track status of nonconforming material reports to determine product release status., • Support process validation by assisting in protocol execution, data compilation, and coordinating validation activities., • Support internal and external audits and prepare documentation accordingly., • Review all quality documents for accuracy and completeness. Notify appropriate individuals if corrections are needed., • Document, archive, and maintain all inspection records, device history records, and all other quality documents., • Promote continuous improvements by suggesting revisions to appropriate work instructions and procedures relevant to the role. Engage in the effort to identify and propose implementation actions to improve Quality Management System., • Navigate, generate quality records, and/or perform transactions on NKOM electronic QMS and ERP systems., • Perform other related quality functions as required by management. Qualifications • A minimum of 4 years of relevant experience and a high school diploma., • Demonstrates basic knowledge of Quality Management System and current Good Manufacturing Practices (cGMP)., • Demonstrates strong verbal, written, and interpersonal communication skills., • Ability to use handheld measuring devices such as calipers, rulers, micrometer, etc., • Ability to work effectively in a team environment., • Basic computer skills which include the use of Microsoft WORD and EXCEL., • Possesses basic knowledge and skills on navigating, generating quality records, and/or performing transactions on electronic QMS and ERP systems. Desirable Accreditations/Knowledge • Hands on experience with mechanical ventilators Compensation The anticipated range for this position is $28.00 to $32.00 at an hourly rate. Actual placement within the range is dependent on multiple factors, including but not limited to skills, education, experience and location. Working Conditions • A QC Inspector I works in an office environment and Manufacturing area., • A QC Inspector I works a standard work week but may be required to work some evenings and weekends to meet the needs of the company. Physical Requirements Must be able to type using the keyboard of a computer. Must be able to talk, listen and speak clearly on the telephone. Must be able to lift and carry up to 50 lbs.

Job Description The Senior Inspector performs receiving, in-process, and final inspection on electronic systems; electromechanical assemblies, or mechanical assemblies and subassemblies. They are responsible for determining whether parts or assemblies are acceptable based on drawing and specification requirements. The position requires accurate & concise communication between production, project management, shipping/receiving, and quality management. Duties and Responsibilities: • Perform all tests, inspections and measurements required by pre-defined instruction and/or experience., • Conduct inspection of incoming raw materials, first article parts, in-process materials, and finished goods, • Inspect both work in progress and completed tasks for compliance in accordance with Purchase Order Instructions, Design Drawings & Specifications, Quality Control Plan, Safety, and contractual requirements, • May Coordinate and assist with scheduled inspections with FAA/EASA regulatory personnel, • Develop training and train junior individuals on inspection equipment and methods, • May Travel to various local and international supplier facilities to preform inspections. Preferred Qualifications and/or Education: • 6+ years of experience working in a Quality Inspection role, • Experience in aerospace electromechanical quality control inspection, • Experience working in an ISO 9001/AS9100 QMS environment, • Must be able to read and interpret schematics, blueprints, specifications, etc. per ASME Y 14.5 and ASME Y 14.100 and able to train junior inspectors, • Able to read and interpret service manuals, diagrams and schematics relative to installation and repairs, • Willing and able to train junior inspectors on how to use various inspection equipment, • 6+ years of experience using mechanical/electrical inspection/test tools (calipers, micrometers, multi-meters, surface plate, height gauges, comparator, gauge blocks, thread gauges, etc.) and/or 6+ years working with FAA CFR Part 21 requirements performing and presenting parts for regulatory conformity inspections should be able to issue 8130’s & Form 1s, • Solid knowledge of AS9102 FAIR requirements and able to train junior inspector on its completion, • Must have a clear understanding of document types that are impacted by Configuration Control Changes; e.g. Drawings & Specifications, Procedures and Work Instructions, • Previous experience working with an ERP or MRP systems, • Proficient computer skills (MS word, Excel, Outlook) Benefits The starting pay range for this position is $25.00 to $31.00 per hour however, the base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, Safran Passenger Innovations offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with a company match, • Paid time off covering vacations, personal time off, and sick days, capped off by an exciting year-end holiday shutdown

Job Description We are seeking a Quality Control Inspector (2nd Shift) to perform in-process and final inspections of printed circuit boards. This role is responsible for verifying product quality, completing First Article Inspection (FAI) documentation, and ensuring compliance with customer requirements and industry standards. Duties & Responsibilities • Review SOPs and travelers to verify lot numbers, panel quantities, and completion of prior operations., • Perform visual and mechanical in-process and final inspections of PCBs., • Inspect holes, thickness, markings, and conductive patterns using inspection equipment., • Identify nonconformances and communicate issues to the team leader or supervisor., • Stamp and date travelers and maintain accurate inspection records., • Complete FAI documentation (AS9102, PPAP, and standard FAI forms)., • Prepare quality documentation including C of C, ionic test records, serial logs, yield reports, and NCRs., • Interpret engineering drawings, customer purchase orders, IPC standards, and military specifications., • Support MRB activities and internal/external audits., • Maintain a safe and organized work environment., • Perform other duties as assigned. Job Qualifications • High school diploma or equivalent., • Experience in PCB or electronics manufacturing inspection (final inspection preferred)., • Knowledge of flex and rigid-flex printed circuits., • Familiarity with IPC standards (IPC-6012, IPC-6013, IPC-A-610, J-STD-001)., • Ability to read and interpret drawings, specifications, SOPs, and technical documents in English., • Strong attention to detail and communication skills., • Ability to work overtime as needed., • Basic computer skills (Microsoft Word, Excel, etc.). Physical Requirements • Ability to perform detailed visual inspections using magnification tools for extended periods., • Ability to stand or sit for long periods during the shift., • Manual dexterity for handling small components and boards., • Ability to lift up to 25 pounds as needed. Hourly Pay: $21 - $25 Compensation is based on relevant experience, education, certifications, and specialized skills. Benefits Winonics provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability, provides paid time off and paid holidays. Opportunities for professional development and career advancement. All employment offers at Winonics are contingent upon the successful completion of a background check and pre-employment drug screening. Winonics is a drug-free workplace and complies with all applicable federal, state, and local laws regarding background investigations and substance testing.

Job DescriptionSUMMARY The Quality Inspector will evaluate product conformity by measuring or otherwise comparing product to customer requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform visual and precision mechanical inspection of raw materials and finished products., • Able to use standard mechanical measuring tools (Calipers, Micrometers, Plug & Ring Gages, Gage blocks, Height gage, etc.), • Ability to read and interpret engineering drawings, standards and specifications., • Familiar with ANSI/ASME Y14.5., • Proficient shop math skills, including some trigonometry., • Ability to prepare and complete documentation such as inspection reports using Microsoft Excel., • Ability to prepare and complete FAIs per AS9102 requirements, • Good communication skills and ability to coordinate interdepartmental tasks., • Identify quality issues and recommend corrective actions, • Ability to prioritize multiple assignments and exercise independent judgment., • All other dues and responsibilities as assigned by Supervisor. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Proficiency in English and basic computer skills, including the use of the internet and Microsoft Office, • Strong understanding of quality control standards and procedures, • Read and interpret blueprints, • Attention to detail, • Ability to work independently and as part of a team EDUCATION and EXPERIENCE • High school diploma or general education degree (GED); Bachelor's degree preferred, • Certification in quality control or inspection (ASQ CQI) is a plus, • 2+ years of experience in mechanical inspection or quality assurance, • Knowledge of AS9100, ISO 9001:2015, Lean Manufacturing, Quality Management Systems, Root Cause Analysis is a plus, • One-year-related experience and/or training; or equivalent combination of education and experience. Work Schedule: Monday to Thursday 6am to 4:30pm. Job Posted by ApplicantPro

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. Role Overview: The Quality Inspector role will be responsible for performing in-process and final inspections of harnesses and hardware to ensure compliance with internal, external, and industry specifications. This role plays a key part in supporting production goals, driving continuous improvement, and ensuring the on-time delivery of high-quality products. The ideal candidate will have strong attention to detail, a quality-first mindset, and the ability to work collaboratively across functional teams. What you'll own: • Perform in-process and final inspections of hardware against engineering drawings, industry specifications, and internal/external quality requirements., • Conduct incoming inspections as required to support production timelines., • Create and maintain inspection documentation, including First Article Inspection Reports (FAIRs), Inspection Reports, Certificates of Conformance (CoC), and End Item Data Packages (EIDPs)., • Ensure the delivery of high-quality products from Senra's manufacturing team, supporting production, operations, and delivery targets., • Collaborate with cross-functional teams to drive root cause analysis (RCA) and corrective actions (CAPA) for quality-related issues., • Drive Non-Conformance Reports (NCRs) to closure, supporting disposition, approvals, and verification activities as required., • Investigate, document, and resolve product and process issues, ensuring proper corrective actions are implemented and verified., • Identify and recommend process improvements that enhance product quality, reduce inefficiencies, and support lean manufacturing initiatives., • Perform product testing on hardware as required to verify performance and quality., • High school diploma or equivalent (Associate's or Technical Degree in a related field preferred)., • 2+ years of experience in quality inspection, production, or manufacturing roles, • Hands on experience inspection of harnesses to IPC-620 or NASA 8739.4 Class 3, • Familiarity with inspection techniques, root cause analysis (RCA), and corrective action processes (CAPA)., • Ability to read and interpret engineering drawings, blueprints, and industry specifications., • Experience with quality management systems (QMS) and non-conformance reporting (NCR) processes., • Strong documentation skills, with experience in creating First Article Inspection Reports (FAIRs), Certificates of Conformance (CoC), and End Item Data Packages (EIDPs)., • Strong problem-solving, organizational, and multitasking skills,, • Hands on experience inspecting aerospace or defense hardware, • IPC-620, IPC-610 and NASA-STD-8739.4 certified, • Compensation will be based on experience, qualifications, and other job-related factors., • Hourly Range: $24.00- $36.00, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$24—$36 USD

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (key brands include Onboard Systems, Lifesaving Systems, and Meeker Aviation). The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview Location: Anaheim, CA (Onsite) This is a union position covered under a collective bargaining agreement. Starting pay is $25.00 per hour (day shift) and $27.50 (swing shift), per the union contract. The ability to pass a pre-employment background check and an FAA-regulated drug test is required. The Quality Inspector will be responsible for performing inspections, measurements, and tests on products throughout the production process. This role will also support quality engineering and management initiatives by collecting data, implementing corrective actions, and maintaining compliance. What You’ll Do • Perform inspections, measurements and tests of products during the receiving, in-process and final inspections in accordance with documented procedures and work instructions. Collect and record inspection and test results. Complete all required forms and documentation completely and accurately., • Support Quality Engineering and Quality Management by helping to assure compliance with the AS9100, ISO 9001, IPC 610 and IPC 620 and applicable FAA standards and regulations (Part 24 and Part 145, 8130-2’s), • Collect data used to generate key quality metrics that drive efforts to assure continual improvement of Onboard Systems processes and products, • Support the implementation and maintenance of effective corrective actions, as directed, to prevent failure recurrence of Onboard Systems products, • This position requires the ability to communicate in English, both verbally and in writing, to complete inspection reports and understand safety and quality standards., • Inspection experience of complex electro-mechanical parts, • Ability to read and comprehend complex documents to include, but not limited to, drawings, procedures, work instructions, forms and schematics, • Strong attention to detail, analytical skills, and problem-solving capabilities What’s In It for You • This position is part of union, offering negotiated benefits and protections. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Final Inspector is responsible for performing visual inspections of PCB bare boards after completion of all processes per standard operating procedures and guidance from the Team Leader. The Final Inspector also stamps the Group A Lot Acceptance Inspection Sheet, Traveler, or rework instruction as required after completing visual inspections. What You'll Do: Read and interpret standard operating procedures and traveler to verify lot number and panel quantity; ensure that the previous operation was completed, signed, and dated on the traveler • Perform a variety of repetitive visual and mechanical in-process inspections to ensure the product complies with order specifications and conformity to specified quality standards, • Inspect holes, thickness, markings, and conductive patterns using the required equipment and confirm that product is defect-free, • Identify non-conformances and inform the team leader, • Stamps and date travelers, • Experience in PCB final inspection, • Hands-on knowledge of flex and rigid-flex printed circuits, IPC-6012, IPC-6013, IPC-610, and military specifications such as MIL STD P-55110, P-50884, and P-31032, and J STD, • Ability to detect PCB defects, • Ability to read and interpret documents such as standard operating procedures, traveler instructions, technical requirements, blueprints, quality processes and safety rules in English, • Ability to work overtime when needed, • 8-hour shift, • Monday to Friday (4:00 PM - 12:30 AM), • Overtime Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionDescription: Position Title: Quality Inspector I Department: Quality Location: Santa Ana, CA FLSA Status: Non-Exempt, Full- Time Job Summary: The QC Inspector I role is responsible for performing detailed Final and In-process inspections on products and materials to ensure compliance with quality standards and specifications, including Rec. Inspection when required. This position plays a vital role in identifying defects, maintaining quality documentation, and supporting continuous improvement efforts within the manufacturing process. Key Responsibilities: · Conduct inspection on solder, conformal coating, bonding, rework as required. · Identify and report any defects or non-conformities · Ensure that all products meet the required quality standards · Work with production teams to identify and resolve quality issues · Maintain accurate records of inspections and test results · Communicate any quality issues to management in a timely manner · Participate in continuous improvement initiatives to enhance product quality and production efficiency · Provide flexible support in final inspection, filling in as needed to maintain workflow and ensure consistent quality oversight. Qualifications: · IPC-610 knowledgeable or certified (Preferred) · J-STD-001 knowledgeable or certified (Preferred) · High school diploma or equivalent (preferred) · Minimum of 2 years of experience in quality inspection Physical Requirements: · Prolonged periods of sitting or standing at a workstation. · Manual dexterity to handle small components and operate inspection equipment.\ · Ability to lift up to 20 pounds occasionally. This job description is intended to provide a clear overview of the primary duties and responsibilities for the Quality Inspector I position. It is not an exhaustive list, and other tasks may be required as needed to support the company’s operations. Regal Technology Partners is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state, or local laws. We strive to create an inclusive and diverse work environment where everyone is valued and respected. If you require any accommodation during the application process or have any questions regarding our EEO policies, please contact Human Resources, Requirements:

Job Description Labor Category Title: Project Manager III Introduction: Incumbent is responsible for customer satisfaction and overall project management of multiple design and construction projects, including the design and construction of projects and renovation of government space within existing buildings. Assigned projects are primarily those estimated at over the prospective level. . Major Duties: Responsible for overall management of construction projects from the preliminary planning stage through design, construction, commissioning, and building occupancy. Duties encompass broad managerial responsibilities such as planning, organizing, controlling, coordinating, reviewing, and approving design, construction and related work. The project manager is responsible for establishing a scope of work with a customer, preparing a government estimate using the government's estimating software, managing a project schedule, and for procuring services, with a government contracting specialist, from contractors and architect/engineering (AJE)firms. Acts as the "on-site" construction manager or inspector for projects performing day-to-day construction management duties. Responsible for resolving complex problems or conflicts impeding progress, and for assuring that contractors and agency staff work effectively toward timely completion of projects within an established budget. Must have extensive knowledge of commercial building systems including chillers, boilers, Building Automation Systems (Siemens preferred), fire systems, pumping systems, cooling towers, HVAC equipment, electrical and electrical distribution, water treatment, domestic water systems, piping systems and all other related building systems. Must also have advanced computer skills. Individual may be required to perform travel in conjunction with site visits and progress reviews on project locations or to attend National, Regional, and local conferences, seminars, and meetings. Minimum Qualifications: Bachelor of Science in Construction Management, Engineering or a related field and/or ten (10) years of experience in design and management of construction projects. Masters in a related field is desired. Requires knowledge of and skill sufficient to direct the application of the latest developments in building design and construction and in solving problems not readily treated by accepted methods. Requires knowledge of project management; architecture and engineering . concepts, principles, and practices; and the ability to read construction documents, prepare construction schedules, prepare construction cost estimates, and write clear scopes of work and specifications. Good interpersonal skills are required when working with a diverse team consisting of the customer, contract specialist, contractor, financial manager, and other stakeholders. The project manager is responsible for ensuring that the team members and stakeholders participate efficiently and effectively to achieve the common goal of completing a successful construction project.

Job DescriptionQC Inspector Job Title: QC Inspector Location: Anaheim, CA Hourly Rate: $28.00 - $40.00 Position Summary: We are seeking an experienced Quality Control Inspector with a strong aerospace background. This role inspects incoming sheet metal parts, machined components, and raw materials, reviews Certificates of Conformance (CofCs), and performs final shipping inspection for aerospace customers and outside process vendors. The ideal candidate will have experience operating portable Romer arm CMMs; programming experience is not required. If that sounds like you, please apply. Responsibilities: • Receive aerospace sheet metal and machined parts, verify counts, and perform various inspections., • Perform dimensional and visual inspections to AS9100 and customer specifications using calipers, micrometers, height gauges, and thread gauges., • Verify supplier CofCs, material certifications, and other aerospace quality documents., • Inspect completed aerospace components before shipment to customers and vendors. Package per aerospace packaging standards (Boeing D6-51991, Lockheed Martin)., • Operate Romer and Hexagon portable CMM arms (required)., • Create AS9102 First Article Inspection Reports (FAIRs) and other quality documentation., • Follow ITAR/EAR export control requirements for aerospace parts., • 3+ years of experience in aerospace quality inspection, shipping, and receiving., • Strong knowledge of AS9100 quality standards., • Experience operating a Romer CMM arm., • Ability to read and interpret aerospace blueprints, drawings, and specifications., • Skilled in inspection tools: calipers, micrometers, height gauges, thread gauges., • Health insurance., • Dental insurance., • Paid time off., • Paid holidays., • 401k offerings., • & other great benefits! - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 02/25/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Kilgore Machine Co., Inc. is seeking an experienced Quality Control Inspector to join our aerospace CNC machine shop. This role is responsible for ensuring that precision-machined aerospace components meet all engineering, customer, and regulatory requirements. The ideal candidate will have strong experience in ASME Y14.5 GD&T, first article inspections, and general job shop inspections. Key Responsibilities * Perform First Article Inspections (FAI), in-process inspections, and final inspections in a job shop environment * Inspect precision aerospace components using a variety of precision measuring devices * Interpret engineering drawings, specifications, and GD&T per ASME Y14.5 * Identify nonconformances, defects, and potential process issues; work with production to troubleshoot and resolve them * Assist in implementing and improving quality control procedures and documentation * Maintain accurate inspection records and reports * Ensure compliance with company quality standards and aerospace requirements * Maintain a clean, organized, and safe work environment Qualifications * Minimum 5 years of experience as a Quality Control Inspector in a CNC machining or aerospace manufacturing environment * Strong working knowledge of ASME Y14.5 (GD&T) * Experience with first article inspections, in-process inspections, and general inspections(Job Shop) * Proficient with precision measuring tools (calipers, micrometers, height gauges, indicators, etc.) * Excellent attention to detail and accuracy * Strong analytical, problem-solving, and critical-thinking skills * Good math skills related to machining and inspection * Strong written and verbal communication skills * Self-starter and capable of working with minimum supervision * Excel knowledge is a plus Preferred Experience * Aerospace manufacturing background * Job shop environment experience * Familiarity with quality systems and inspection documentation Company DescriptionPrecision machine shop, aerospace CNC lathes and millsPrecision machine shop, aerospace CNC lathes and mills

Job Description POSITION SUMMARY: The Quality Control Inspector is responsible for inspecting products to verify compliance with customer and specification requirements. This role involves performing inspections, documenting nonconformance, and ensuring adherence to quality standards. This ideal candidate should have strong attention to detail and experience using inspection equipment. ESSENTIAL DUTIES & RESPONSIBILITIES: • Read and follow instructions on job traveler., • Read and understand customer purchase orders., • Locate specifications and inspection procedures in the company's computer system., • Write nonconformance reports and document change forms as required., • Evaluate jobs on Quality Control (QC) hold for compliance., • Verify inspection equipment calibration dates to ensure accuracy., • Perform inspection tests as required., • Adheres to safety regulations., • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Knowledge of inspection equipment such as micrometers, intermicrometers, calipers, dail bore gauges, dual-a-scope, permascope, and positector, • Ability to interpret blueprints and technical sketches., • Strong written and verbal communication skills for customer and internal interactions., • Logical reasoning and problem-solving skills., • Ability to work independently and as a part of a team. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Must be in good physical condition, alert, and well-rested., • Ability to walk between buildings and departments with varying elevations., • Ability to stand for periods of 30 minutes or more., • Ability to stoop, bend, climb stairs, and lift up to 50 pounds. We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 6:00AM - 2:30PM

Job Description We are a CNC Aerospace manufacturing company located in the City of Fountain Valley, CA, currently seeking a skilled Quality Control Inspector to join our team. The ideal candidate will play a key role in performing inspection functions to verify product conforms to specification, spec, tight-tolerance machined components, etc. This individual must demonstrate strong problem-solving skills, knowledge or some knowledge of using the absolute arm 7 axis (Hexagon brand) Veri surf and uphold excellent attendance and punctuality. tight-tolerance machined components. (our current inspector will be willing to help train using the arm if not to familiar) Key Responsibilities: • Performs and documents variety of inspections thru the day and sampling procedures., • Assists and supports QA/QC Management documents., • Maintain quality records, reports, logs, and retention samples., • High school diploma or GED minimum., • Bilingual (English/Spanish), • 5-8 years of relevant work experience required., • General proficiency in using Microsoft Word, Excel, Veri surf. To Apply: Please send your resume for consideration to Schedule & Pay rate: Pay Rate: $35-39.00/hr (DOE) Schedule: Mon-Fri 1st shift 6:00am – 4:30pm (10 hrs) Company DescriptionManufacturing Mill fixture, Jigs, ASSY for all Aerospace companies, Flying and Ground support for the Space.Manufacturing Mill fixture, Jigs, ASSY for all Aerospace companies, Flying and Ground support for the Space.

Job Description Job Description: Now Hiring: Quality Inspector / Aerospace Manufacturing Inspect purchased and manufactured parts using drawings, specs, and certs. Create First Article Inspections (AS9102). Perform in-process, final, and shipping inspections. Use CMM and precision gauges. Write NCRs. Scan quality docs into EPICOR. Support calibration by tracking equipment, scheduling recalibration, and working with vendors. Train toward FAA ODA unit member. This is a manufacturing facility that often requires OT to complete jobs on time. You must be flexible to work mandatory weekday OT and if necessary weekend OT, often up to 12 hours. Key Duties • Receiving, in-process, final, and shipping inspection, • Create FAIs (AS9102), • Measure parts with CMM and precision tools, • Approve conforming parts; complete records, • Write and process NCRs, • Manage tools/equipment calibration, • Follow ARA procedures; suggest improvements, • 2+ years inspection experience (machinist/technician), • GD&T knowledge, • Experience with calibration, • Use of micrometers, calipers, pin gauges, hardness tester, Romer Arm, CMM, etc., • Clear written and verbal communication, • Lift up to 35 lbs; stand, walk, reach, stoop as needed LI23 LILive24

Job DescriptionSalary: $52,500 - $57,500 per year DOE Ideal Candidate Profile Do you fit this profile? • Wants to start a CAREER / not just another "job", • Wants to make a difference, • High Moral Standards & Values, • Positive, • Helpful, • Team Player, • Professional, • Wants to be the best of the best, • Is Ready Envirocheck is a growing company and has exciting opportunities for A players on our team. Job Summary Our environmental field technicians / consultants (Level 1) provide clients with advice regarding potential contaminant presence in a variety of settings including residential, commercial, and industrial buildings. An ideal candidate should be an individual who is self-motivated, this hands-on position requires strong analytical and communication skills to identify a potential issue and convey the said issue to a client with remedial solutions when necessary. Through on-the-job training and certification courses, field technicians gain knowledge regarding state and federal regulations and in turn conduct surveys and produce reports as a knowledgeable party. Responsibilities and Duties • Conduct on-site inspections, which includes documentation of site conditions, sampling, and in-person consultation, • Produce professional survey reports based on inspection notes and sample data with remedial recommendations as necessary, • Coordinate with multiple parties regarding inspections while keeping all parties best interests in mind, • Adhere to all applicable state and federal laws and regulations and communicate that information to clients in a professional manner Qualifications and Skills • No experience required - will train., • High school diploma is required., • Prefer individuals with a bachelor's of science degree in construction management, biology, chemistry, environmental science, and/or a related science., • Valid Driver's License, • We are hiring for all levels! Certified asbestos consultants (CAC), certified site surveillance technicians (CSST), Lead sampling technicians, or CA DHS lead inspector/assessors are encouraged to apply. Benefits • Health Insurance options, • 401K with matching, • Company vehicle & iPhone & gas card provided, • Paid Training & Field-Related Education

Job Description Position summary: Performs diversified inspection work. Uses engineering drawings, process specifications, material certs, test report, and customer documents to check or verify purchased parts. Create first article inspection (FAI) use AS9102 form, detailed parts manufactured by ARA, assemblies and sub-assemblies and final deliverable units. Able to perform complex parts inspection use CMM inspection equipment, and other standard inspection gauges. Must be able to interpret drawings. Create Non-conforming Report (NCR) to document nonconforming items. Daily scan quality certs or documents into EPICOR system. Be able to train and become FAA ODA unit member. Support calibration by managing equipment when it needs recalibration, contacts calibration suppliers and work closely with internal ARA employees. Essential Functions: • Performs general inspection work in various basic areas and is capable of these required function:, • Receiving inspection, • Create first article Inspection (FAI) use AS9102 form,, • In-process inspection (multiple product lines), • Final and shipping inspection, • Equipment/ tools management to ensure calibration is maintain, • Takes direction from inspection lead for work assignments and obtains guidance on technical matters., • Familiar with all applicable ARA inspection procedures and related work instructions and recommends improvements when applicable., • Measures parts to verify accuracy of dimensions, using standard and/or special CMM measuring equipment. Tests units for specification conformance using measuring test equipment as may be required by that specification., • Stamps or otherwise approves acceptable parts and prepares the necessary paperwork to document the results., • Through the Non-conforming Material Report (NCR), clearly and concisely describes the condition of unacceptable parts, determines responsibility for errors and initiates NCR as applicable for disposition., • Works from engineering drawings, process specifications, customer drawings, and test procedures., • Maintains all required inspection records as per procedures., • Performs other duties assigned., • Good communication skills; both written and verbal., • Exposure to mechanical and or electrical inspection techniques, ability to use precision measuring equipment such as micrometer, calipers pin gauges, rulers, hardness tester, Romer Arm, CMM, levels, radius gages, etc.Education and Experience:, • Two years performing inspection functions, e.g., machinist or technician. High school graduate or equivalent., • Experienced or trained in using General Dimensioning & Tolerancing.

Job Description Emerald Technologies has an exciting opportunity for two technically proficient SMT In-Process AOI Inspector – Level I to join its Brea, CA team! The AOI Inspector – Level I will perform visual, electrical, and dimensional inspections of printed circuit board assemblies and will be responsible for daily inspections to assure compliance with manufacturing traveler, engineering drawings, bill of materials, process specific instructions, critical criteria, IPC standards (IPC-610, J-STD-001, Class 2), and other applicable documents. At Emerald Technologies each employee has a significant role in building innovative products for various industries. Come and work in a supportive, fun team atmosphere where the work is meaningful, and careers have no limits! Responsibilities of the AOI Inspector – Level 1: • Responsible for setup and operation of 2D AOI (Automated Optical Inspection) machines., • Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship that complies with the appropriate requirements from engineering drawings, process specifications, industry standards (IPC-610, J-STD-001), and customer-specific criteria., • Uses precision measuring instruments such as smart tweezers and calipers and pin gauges to determine adherence to electrical and dimensional specifications on first articles, in-process inspections, and production runs., • Ability to operate equipment in a fast-paced electro-mechanical production environment., • Communicate the defects not captured by equipment to responsible personnel for enhancement of program integrity., • Communicate to assembly operators any of the defects being noted during the AOI operations so that corrections can be quickly implemented., • Perform and record results of first article inspections and in-process inspections of assemblies and input data into the associated database. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the AOI Inspector – Level 1: • High School Diploma or equivalent., • Minimum 3 to 5 years of experience in electronics assembly manufacturing or similar industry., • Experience operating Automated Optical Inspection (AOI) machine and the ability to interpret Engineering Documentation and work instructions., • 3 years of Electronic Manufacturing., • Comprehension of IPC-610 and J-STD-001 standards., • Must understand how electronic components are oriented and be able to distinguish the different part numbers., • 1 year of experience in a regulated industry such as ISO9001, AS9100 or ISO13485. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Second Shift (2 Shifts Total) Shift Hours: Monday–Friday, 2:30 PM – 11:00 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break). Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Breaks Meal Break (First Shift): One 30‑minute unpaid meal break, typically scheduled around 10:30 AM – 11:00 AM. Meal Break (Second Shift): One 30‑minute unpaid meal break, typically scheduled between 6:30 PM – 7:00 PM. Rest Breaks: Two paid 10‑minute rest breaks per shift, in compliance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job Description Responsibilities include: • Provide grading observations., • Provide compaction testing on soils, aggregates and asphalt., • Provide special inspections per additional inspection certifications in accordance with approved project documents., • Document project grading activities., • Provide sampling and Quality Control of concrete and/or grout. Requirements Required Competencies: • Ability to work well in a team environment and communicate clearly with coworkers, clients, consultants, contractors and potential clients., • Nuclear gauge usage certification., • ACI Field Technician Grade 1 license., • ICC Soils Inspector License is a plus., • ICC Reinforced Concrete is a plus., • Excellent written and oral communication skills., • Excellent computer skills including but not limited to Microsoft Office Outlook, Word, Excel, etc. Benefits Excellent benefits package including medical, dental and 401K Plan. Salary commensurate with experience.

Job Description The Manufacturing Technician performs the production assembly and test of the company’s component, sub-assembly and finished goods parts. The Manufacturing Technician uses company drawings, assembly instructions and Shop Orders to complete and document the required work. Duties and Responsibilities: • Obtain the assembly kits from the stock room personnel, • Verify the physical contents of the assembly kit to the Pick List paperwork provided with the Shop Order, • Advise the stock room personnel of any discrepancies found and requests corrections to the issued materials, • Assemble items in accordance with company drawings and assembly instructions, following the steps (in order) as outlined in the provided Shop Order routing. The Manufacturing Technician indicates completion of each routing step by initialing before starting the subsequent assembly step, • Request in-process inspection where required by Shop Order routing, and will not advance beyond that step until required inspection is completed and indicated on routing by the Inspector, • Test each assembly as required by the Shop Order routing, following the Acceptance Test Procedure (ATP) noted in the routing or Assembly Instruction, using equipment described in the ATP, • Record the test results, complete, print & save the required test results, • Package the completed assembly using provided packaging or packages such that assembly is packaged safely for storage, according to ESD and FOD control, • Participate in production feedback meetings, contribute in team-based production improvements and support Lean manufacturing activities, • Perform other job-related duties as assigned Requirements Preferred Qualifications and/or Education: • Some course work in electronics, • 4 years+ of experience working in a similar role, • Knowledge of commonly used concepts, practices, and procedures within a manufacturing environment The starting pay range for this position is $22.25 /hour to $28.25 /hour per year however, base pay offered may vary depending on skills, experience, job-related knowledge and location.

Job DescriptionProduction Assembler Location: Santa Ana, CA Hours: Mon-Fri 7:00am-3:30pm Pay Rate: $18-20/hr Summary The Production Operator will perform assigned duties as necessary and comply with all company work instructions and quality management system instructions. In this role, the individual will read and follow assembly specification instructions and inspect assembled discs. In addition, will also work with production, engineering and other departments to assist with refining products and processes. Essential Duties and Responsibilities • Set up and assemble parts., • Build parts in line with company expectations., • Will use simple hand and machine tools, • Accurately read and follow procedures, routing and other work instructions., • Follow established procedures and guidelines to meet production specifications, schedules, and, • quality standards., • Safely operate machines and production equipment, following instructions., • Maintain a clean and organized work area along with equipment and materials., • Run, monitor and ensures parts flow through the automated machines properly, • Troubleshoot and resolve technical issues to minimize rejects., • Ensure adherence to quality product standards, minimizing defects., • Maintain accurate daily production records for performance analysis and meet company, • deadlines to adhere to production schedules., • Comply with relevant elements of quality systems., • Inspector output quality and address faulty products promptly., • Participate in audits to ensure compliance., • Follow test procedures according to company standards., • Assist with inventory management and material movement., • Verify arriving materials against purchase orders., • Ensure proper flow of materials and products in manufacturing areas per guidelines., • Report work progress, updates, and quality issues to the lead or supervisor., • Adhere to rules and regulations, including Environmental Health and Safety, Ethics,, • International Trade Compliance, and Human Resources., • Will perform other assigned tasks possibly with other functions/department as the need arise. Qualifications Required • High School Diploma or equivalent required., • Minimum of 1 year experience within assembly/production or related work experience., • Ability to comprehend and follow written specifications, • Ability to work in a fast-paced work environment while maintaining a strong attention to detail., • Ability to maintain a clean & organized environment., • Basic computer skills with the ability to navigate their way through the computer to enter data,, • review documents, check email, employee center, and announcements., • Excellent hand dexterity and coordination is a must as the position requires repeated reaching,, • bending, twisting, squatting, assembling and standing for long periods of time throughout the, • entire shift., • Excellent eyesight for attention to detail and safety awareness is a must., • Demonstrated experience in utilizing precision tools & equipment., • Prior work experience in a clean room environment is preferred but not required., • Requires on-going lifting and moving of materials., • Ability to lift up to 35 lbs., • Good verbal and written communication skills to effectively communicate to team members,, • engineering and quality personnel., • Ability to learn other skills as the need arises., • Experience in a manufacturing environment., • Ability to be flexible in changing situations., • Ability to be collaborative and work with the team to meet Company goals. Work Environment • Ability to work in a warehouse and manufacturing environment., • Work in a clean room environment with RH20% and below in some rooms., • Must review, understand, and adhere to Clean Room gowning requirements., • May possibly work in a BSL2 lab, • Some work stations will require Personal Protective Equipment (PPE) to be worn., • Specific Personal Protective Equipment (PPE) worn in cleanrooms and BSL2 lab

LEAF is seeking qualified Civil Infrastructure and Public Works Construction Inspectors.

Why join us? Exceptionally strong compensation and benefits package! Great work environment and abundant opportunities for growth Impactful role in a niche, precision-driven aerospace environment Collaborative culture rooted in integrity, action, and team diversity Opportunity to mentor, innovate, a

The Final Inspector - Level III will perform visual, electrical and dimensional inspection of printed circuit board assemblies; will be responsible for performing receiving inspections of outsourced processes and final assembly inspections while recording results and preparing various quality docume

The Quality Inspector is responsible for inspecting, testing, and verifying products to ensure they meet quality standards, specifications, and customer requirements.

The Electro Optical Infrared Systems (EOIS) line of business within DRS has locations in Dallas and Austin, TX, Melbourne, FL, and Cypress, CA.EOIS develops, manufactures, and supports infrared and electro-optical solutions for soldiers, ground vehicles and airborne platforms.We offer an exciting an

Kleinfelder's Cerritos, CA office is seeking multi-certified ICC Special Inspectors to join our Southern California team. The inspector will prepare daily reports and data sheets and may be called upon to perform various tasks at the discretion of their supervisor. AWS Certified Welding Inspector.

Minimum of at least one ICC certification, preferably ICC Building Inspector and/or ICC Residential Building Inspector certification. BPR Consulting Group is seeking a Senior Building Inspector with permit technician experience to join our team. Three (3) plus years as a building inspector or buildi

Highlighted Benefits for our Construction Inspector:. Construction Inspector - Transportation. Our Construction Management Team in Southern California has an opportunity for a talented Transportation Construction Inspector.