Trabajos insurance companies en Auburn, New YorkCrear alertas

Job Description Our Auburn Pump and Motor Repair Shop is looking for a skilled Motor Winder to join the team. The Motor Winder’s main responsibility is to assemble, repair, and maintain electric motors both in the shop and in the field. This is a full-time, on-site position. Monday – Friday. 7 AM – 3:30 PM. Motor Winder Responsibilities : • Assemble, repair, and maintain electric motors., • Test and rewind electric motor and generator stators, armatures, or rotors., • Inspect equipment and parts for damage, diagnose possible reason(s) for failure., • Provide information on parts/work required., • Provide recommendations to improve reliability of equipment., • Observe and adhere to Power-Flo Technologies safety procedures., • Maintain Power-Flo Technologies quality standards. Motor Winder Qualifications and Skills : • Experience specifically in winding AC/DC electric motor stators., • Familiar with various hand tools., • Familiar with power tools such as impact guns, cut off wheels, and drills., • Positive attitude and willingness to learn., • Good organizational skills and attention to detail., • Ability to work both independently and in a team setting., • Basic computer skills., • Must be able to regularly lift and/or move more than 25 pounds, frequently lift and/or move more than 50 pounds, and occasionally lift and/or move more than 100 pounds., • Must have a valid and clean driver's license to operate company vehicles. Motor Winder Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $17 - $32 per hour based on experience. Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies Auburn is now hiring Mechanics for our Pump and Motor Repair Shop. Location: On-Site in Auburn & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM Pay: $17 - $32/hour (depending on pump and motor repair experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) At the direction of the Shop Manager, Mechanics are responsible for the proper disassembly and evaluation of various electric motor styles including troubleshooting. They are also responsible for the assembly, quality control and testing processes involved in electric motor repair. Field Service positions are also available to properly qualified individuals. Mechanic Essential Responsibilities include but are not limited to the following : • Disassemble mechanical AC & DC motors, gear units and pumps., • Assemble mechanical AC & DC motors, gear units and pumps., • Diagnose problems and failures of incoming units to ensure the customer’s complaint is resolved., • Interpret and apply dimensional measurements., • Measure and record electrical data, mechanical fits and clearances., • Write up work scopes for all necessary materials in order to complete the repair., • Follow all necessary instructions in order to complete the repair., • Electrically connect repaired apparatus for test runs., • Maintain a neat and orderly work area., • Organize and maintain personal and shop tools and equipment., • Willing and able to work OT as required. Mechanic Necessary Qualifications include : • 2 years' mechanical assembly and disassembly experience., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists etc., • Mechanical aptitude and basic understanding of electrical theory required., • Valid and clean driver's license to operate company vehicles as needed. Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. We are also looking for Motor Winders, Helpers, and Parts Cleaners. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPick and Pack Workers (Picker/Packer) – 1st Shifts Needed! Location: Auburn, NY Pay Rate: $20.00 per hour Schedule: Monday – Friday | 7AM – 3:30 PM and OT as needed Position Overview: We are seeking dependable and detail-oriented individuals for a Picker/Packer role in a fast-paced production environment. In this position, you will play a key role in preparing products for shipment by accurately counting, packaging, and sealing items to meet quality and efficiency standards. Key Responsibilities: • Pick and handle products to fulfill customer orders, • Accurately count items to ensure correct quantities, • Package products into bags and prepare them for shipment, • Seal and label finished products properly, • Palletize the items, • Maintain a clean, organized, and safe work area, • Picking/packing experience, • Strong attention to detail and accuracy, • Ability to work efficiently in a fast-paced environment, • Reliable attendance and punctuality, • Forklift operation is a plus! Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionPick and Pack Workers (Picker/Packer) – 2nd Shifts Needed! Location: Auburn, NY Pay Rate: $20.00 per hour Schedule: Monday – Friday | 3:00 PM – 11:30 PMPosition Overview: We are seeking dependable and detail-oriented individuals for a Picker/Packer role in a fast-paced production environment. In this position, you will play a key role in preparing products for shipment by accurately counting, packaging, and sealing items to meet quality and efficiency standards.Key Responsibilities: • Pick and handle products to fulfill customer orders, • Accurately count items to ensure correct quantities, • Package products into bags and prepare them for shipment, • Seal and label finished products properly, • Palletize the items, • Maintain a clean, organized, and safe work area, • Follow all production procedures and safety guidelines Requirements:, • Picking/packing experience, • Strong attention to detail and accuracy, • Ability to work efficiently in a fast-paced environment, • Reliable attendance and punctuality, • Forklift operation is a plus! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionPick and Pack Worker – 2nd Shift Location: Auburn Pay Rate: $20.00 per hour Schedule: Monday–Friday | 3:00 PM – 11:30 PM Please Note: Mandatory overtime may be required based on production needs. We are seeking dependable and detail-oriented individuals for a Pick and Pack Worker position with one of our valued clients in Auburn, NY. This is an excellent opportunity to join a production environment with consistent second-shift hours. Position Overview The Picker/Packer is responsible for preparing products for shipment by accurately counting, packaging, sealing, and labeling items while maintaining quality and efficiency standards. Key Responsibilities • Pick and handle products for order fulfillment, • Accurately count items to ensure correct quantities, • Package products into bags and prepare items for shipment, • Seal and label finished products, • Maintain a clean and organized work area, • Follow all production procedures and safety guidelines Qualifications, • Strong attention to detail and accuracy, • Ability to work in a fast-paced environment, • Reliable attendance and punctuality, • Ability to stand for extended periods and perform repetitive tasks throughout the shift, • Flexibility to work mandatory overtime when needed, • Must demonstrate professionalism, reliability, and the ability to contribute positively to a team-oriented work environment, • Candidates must be able to work safely and comply with workplace substance-free policies Why Apply?, • Competitive pay at $20.00 per hour, • Consistent Monday–Friday schedule, • Opportunity for overtime, • Steady second-shift hours Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. As the Regional Repair Shop Manager, you will play a critical role in driving business growth, ensuring repair quality, and delivering top-tier service to our customers. You will oversee both our Buffalo and Auburn repair facilities which provide field service and in-house repair or rebuilding of equipment and machinery. Salary Range: $75,000 – $125,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • EAP, • ESOP (Employee Stock Ownership Plan), • 401K Your core responsibilities will include: Developing Sales Strategies and Leading Account Management • Manage the end-to-end workflow of the shop, including repair, packing, delivery, and pick-up, to ensure efficiency and on-time performance. NECESSARY QUALIFICATIONS • Experience in wholesale motor/electrical business., • Strong leadership skills., • Excellent organizational skills., • Inventory management experience., • Ability to strategize and plan., • Proficiency with Microsoft Office., • Excellent verbal and written communication skills., • Demonstrated capability to manage high quality, efficient and cost-effective operations a must., • Associates degree from two-year college or university, one to two years' related experience and/or training; or equivalent, • Ability to travel between Auburn and Buffalo locations (overnights not required) PHYSICAL REQUIREMENTS • Ability to sit for prolonged periods of time., • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Job Title: Automation Technician III Job Description • The Automation Technician III supports daily manufacturing operations by ensuring that complex automation equipment runs efficiently, reliably, and safely., • Collaborate daily with automation and manufacturing groups to maintain efficient and productive operation of automation equipment., • Train, assist, and evaluate lower-level technicians to build technical capability within the team., • Perform major repairs and complex troubleshooting of mechanical and electrical automation issues on production equipment., • Communicate with project managers, customers, and vendors to clarify and support technical automation requirements., • Provide input and constructive feedback on automation system designs to improve performance, reliability, and maintainability., • Assist engineers and project managers in creating, executing, and documenting automation qualifications and validations., • Make changes and revisions to basic automation designs and update all related documentation to reflect current configurations., • Assemble cost estimates and quotations for typical automation projects, including refurbishments and repairs., • Execute low- to mid-level project coordination tasks, ensuring timelines, resources, and technical requirements align., • Identify and communicate technology training needs to stay current with automation equipment, software, and techniques., • Write camera programs from start to finish for automation and mold applications, and assist in debugging and improving existing vision programs., • Develop, modify, and optimize programs for 6-axis and SCARA automation robots, as well as complex top-entry and mold take-out robot systems., • Use PLC knowledge to connect to automated equipment, diagnose issues, and implement improvements in performance and reliability., • Create and modify preventive maintenance plans for automated cells to minimize downtime and extend equipment life., • Support manufacturing engineering and process improvement initiatives, focusing on continuous improvement in quality, throughput, and efficiency., • Strong proficiency in PLC troubleshooting, including hands-on experience with Allen-Bradley and Siemens PLCs., • Experience with CAD software for reviewing and supporting automation and mechanical designs., • Experience with instrumentation implementation in automated systems., • Expertise in manufacturing engineering and process improvement within a production environment., • Demonstrated strength in continuous improvement within an engineering or manufacturing context., • 7+ years of experience as a manufacturing technician working with high-speed precision manufacturing equipment and inspection systems., • 5+ years of experience in automation, electrical, or mechanical engineering within a manufacturing setting., • Ability to troubleshoot complex mechanical and electrical automation issues independently., • Strong communication skills for working with engineers, project managers, customers, and vendors., • Ability to write, modify, and debug programs for 6-axis and SCARA robots, as well as top-entry and mold take-out robots., • A college degree (AAS or above) in an automation-related field such as Electrical Engineering, Mechanical Engineering, or a closely related discipline., • Experience in medical device or similarly regulated, high-precision manufacturing environments., • Background in manufacturing engineering and process optimization projects., • Experience creating and maintaining preventive maintenance documentation for automated cells., • Familiarity with continuous improvement methodologies applied to automation and production systems., • Ability to estimate scope and cost for refurbishments, repairs, and small automation projects., • This position is based in a new, state-of-the-art manufacturing facility equipped with modern automation, robotics, vision systems, and high-speed precision manufacturing and inspection equipment. 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Workplace Type This is a fully onsite position in Auburn,NY. Application Deadline This position is anticipated to close on May 25, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Power-Flo Technologies is seeking a reliable and enthusiastic individual for a Panel Technician Helper position at our Auburn location. Monday - Friday. 7 AM - 3:30 PM. Competitive Benefits Package • Health insurance (medical, dental, vision), • EAP, • PTO program and paid holidays, • 401K, • ESOP (Employee Stock Ownership Plan) Panel Technician Helper Primary Functions Assist with the building and wiring of custom industrial control panels as well as OEM products. Maintain a neat and orderly work area at all times. Panel Technician Helper Essential Responsibilities include assisting with the following: • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Basic Knowledge of Electrical Theory, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret electrical schematics and mechanical drawings, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies is seeking to hire a full-time laborer that can support our pump and motor repair shop in Auburn, NY. Laborer Responsibilities Assist with the following: • Disassemble pumps and electric motors to determine cause of failure and what is required to repair., • Install replacement bearings, seals, shafts, and gaskets on various equipment., • Troubleshoot pump systems in the field using a multimeter., • Make repairs in the field to pumps, motors, and fans., • Use power tools, hand tools, and multimeter to repair pump system in the field., • Work with a helper to complete repair jobs both in shop and on the road., • Replace and wire electric motors at job sites., • Perform troubleshooting of pump sets and simple controls (motor starters). Laborer Necessary Qualifications • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Experience using all types of mechanics tools., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Ability to troubleshoot problems and independently repair., • Knowledge of alignment techniques., • Ability to troubleshoot systems in house and in the field., • Familiar with the installation, service, and maintenance of various pumps and motors., • A plus if familiar with submersible pumps, close-coupled pumps, frame mount pumps, split case pumps, AC motors, etc., • A valid and clean driver's license to operate company vehicles as needed Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $16 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies has the capabilities of an electrical products distributor, manufacturer, and service organization all rolled into one. We are looking for you to join our collaborative team as a Laborer at our Auburn location. Panel Shop Laborer Primary Function : The Laborer will support the building of custom control panels. In this position you will work with experienced technicians to learn: • Basic electrical theory, • To read and interpret electrical schematics, mechanical drawings, and technical manuals, • Mechanically layout and mount hardware components, • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor, • The use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • The use of electrical test equipment, i.e. Multi meter, • Torque check and marking in accordance with PFT procedures, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures Along with acquiring technical knowledge, you will be responsible for the following: • Accounting for parts required for the job, • Maintaining a neat and orderly work area at all times, • Organizing and maintaining shop tools and equipment, • Organizing and maintaining personal tools, • Organizing and maintaining your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc. Panel Shop Laborer Technician Qualifications : • Mechanically inclined, • Familiarity with electrical equipment and hand tools and other power tools, • Willingness to learn, • Current, valid, and clean NYS driver's license to operate company vehicles as needed Physical Requirements: • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Full-time, Monday - Friday, on-site. Candidates need a clean and valid driver's license to operate company vehicles. $16 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • ESOP (Employee Stock Ownership Plan) About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies has the capabilities of an electrical products distributor, manufacturer, and service organization all rolled into one. We are looking for you to join our collaborative team as an Entry Level Panel Technician at our Auburn location. Entry Level Panel Technician Primary Function : The Entry Level Panel Technician will be trained to build custom control panels. In this position you will work with experienced technicians to learn: • Basic electrical theory, • To read and interpret electrical schematics, mechanical drawings, and technical manuals, • Mechanically layout and mount hardware components, • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor, • The use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • The use of electrical test equipment, i.e. Multi meter, • Torque check and marking in accordance with PFT procedures, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures Along with acquiring technical knowledge, you will be responsible for the following: • Accounting for parts required for the job, • Maintaining a neat and orderly work area at all times, • Organizing and maintaining shop tools and equipment, • Organizing and maintaining personal tools, • Organizing and maintaining your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc. Entry Level Panel Technician Qualifications : • Previous experience, training, or schooling in electrical work, • Familiarity with electrical equipment and hand tools and other power tools, • Willingness to learn, • Current, valid, and clean NYS driver's license to operate company vehicles as needed Physical Requirements: • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Full-time, Monday - Friday, on-site. Candidates need a clean and valid driver's license to operate company vehicles. $16 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • ESOP (Employee Stock Ownership Plan) About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. Our Buffalo and Auburn repair facilities provide field service and in-house repair or rebuilding of equipment and machinery. We are looking for you to join our upstate Pump and Motor Repair Team as an Outside Sales Account Manager. Territories: Auburn and Buffalo Salary Range: $50K – $95K (draw against commission structure) Competitive Benefits Package • Health insurance (medical, dental, vision), • EAP, • ESOP (Employee Stock Ownership Plan), • PTO program and paid holidays, • 401K, • Company provided life insurance (after 1 year of employment) Outside Sales (Pump and Motor Repair) Responsibilities: • Schedule outside appointments with existing customers to review requirements, nurture relationships, maximize sales opportunities, and uncover new opportunities., • Generate and develop new business to increase revenue, through prospecting activities, including cold calling., • Effectively liaison between the company and customers for all ongoing account management activities including quotations, pricing, delivery, technical support, and service., • Establish and maintain up to date knowledge on procedures, services, and tools by successfully completing all training activities as needed., • Determine customer requirements to recommend specific products, solutions, or services., • Target Account Planning and Execution., • Perform all administrative aspects of the position, including sales / opportunity reports and maintenance of customer accounts., • Prepare and execute effective sales presentations and demonstrations of services., • Annual sales forecast and execution., • Keep up to date with market trends and competitor activity., • Attend conferences and trade shows., • All other duties as assigned from time to time. Outside Sales (Pump and Motor Repair) Qualifications: • Experience in wholesale motor/electrical business., • At least 2 years of business-to-business sales experience., • Desire to grow business through outside sales appointments., • Strong negotiation and communication skills., • Effective time management, organization, and multi-tasking skills., • Commitment to quality., • Proficiency with Microsoft Office., • Capable of preserving confidential or sensitive information., • Valid and clean driver’s license to operate company vehicles., • Epicor Eclipse ERP preferred. Physical Requirements • Ability to travel extensively, including driving to client locations and attending off-site meetings., • The role involves a significant amount of walking, standing, and potentially carrying promotional materials or product samples., • Ability to utilize a computer keyboard, computer monitor, computer mouse, adding machine, laptop, and telephone for prolonged periods of time Learn more about our Pump and Motor Repair capabilities here: Power-Flo Technologies is a fast-growing family of companies that consist of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan, New England, and Upstate New York areas. Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that supports the electrical, industrial, mechanical, and automation industries with trusted products and real-world solutions. What sets us apart is our people-first, collaborative culture—where technical expertise and teamwork come together to meet the unique needs of our customers. As the Outbound Sales Representative, you will work closely with the sales and leadership teams to nurture sales leads and set up appointments. Monday - Friday. Open to part-time and full-time schedules between the hours of 7 AM - 5 PM. Salary Range: $19/hour + bonus potential Competitive Benefits Package • Health insurance (medical, dental, vision), • EAP, • PTO program and paid holidays, • 401K, • Company provided life insurance (after 1 year of employment) Outbound Sales Representative Duties and Responsibilities: • Make outbound cold calls and emails to potential customers to pitch our products and services, • Field inbound calls from prospective customers answering any questions, • Gain product and service knowledge and stay up to date with our offers, • Research potential customers, • Vet potential customers through a sales funnel, • Track the contact list and maintain customer records, • Take detailed call notes and record feedback, • Follow sales scripts, • Meet or exceed sales goals Outbound Sales Representative Knowledge, Skills, and Ability: • Experience in outbound sales, • Cold calling and/or call center skills, • Strong verbal and written communication skills and attention to detail required, • Strong customer service skills including phone etiquette, active listening, persuasiveness, and determination, • Persistent and results oriented, • Eager to gain product knowledge, • Ability to prioritize work and handle multiple tasks simultaneously in a fast paced, diverse, and growth-oriented environment, • Ability to work under tight deadlines, • Works well independently, • Working knowledge of MS-Office Suite including MS-Word and MS-Excel, • Ability to learn and adapt to proprietary software applications, • A driver's license is required to travel to trainings as needed, • Automation and industrial product knowledge a plus. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies Auburn is seeking a full-time Panel Technician to join our team. Primary Functions Build and wire custom industrial control panels as well as OEM products as assigned by the Panel Shop Supervisor. Maintain a neat and orderly work area at all times. Salary Range: $16 - $22/hour based on experience Competitive Benefits Package: • Health insurance (medical, dental, vision), • EAP, • PTO program and paid holidays, • 401K, • ESOP (Employee Stock Ownership Plan) Panel Technician Essential Responsibilities • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc., • Assist Apprentices and other Technicians in techniques and procedures Panel Technician Necessary Qualifications • Electrical Experience, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret electrical schematics and mechanical drawings, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Valid and clean Driver's License to operate company vehicles as needed Panel Technician Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Now Hiring Part Time School Bus Drivers - Auburn City School District, Auburn, New York As a Part Time School Bus Driver, you will play a vital role in your community and the lives of students. You will start students' days with morning pickup before school and transport them safely back home in the afternoon. Additional hours for field trips and special event transportation may be available. No experience is necessary to become a school bus driver! We are here to help you succeed with expert training and guidance to help you become a safe and professional First Student school bus driver. School Bus Driver benefits: • Pay Details: Dependent on experience and qualifications, • Sign On Bonus: $10,000 fully credentialed*; $5,000 for non credentialed*, • Hourly Rate: $23.69 - $25.00 per hour, • Training Hourly Rate: $23.69, • Commercial Learner's Permit (CLP) and Commercial Driver's License (CDL) training provided!, • Medical, Dental, Vision, & Life insurance or coverage options, • 401(k) Retirement Plan with company match., • Part-time, flexible schedule: Split shifts (AM/PM routes), weekdays only; No nights, weekends, holidays, or summers required., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues., • Community Impact: Be a trusted figure for students and families., • Employee Discount Program: Discounts on various products and services., • Guaranteed Minimum Hours: Get paid for 4 hours per day at minimum., • Safely transport students to and from school and activities., • Supervise boarding and unloading at stops; assist students with seatbelts and mobility aids., • Maintain order on the bus to prevent distractions., • Conduct pre-trip and post-trip inspections (brakes, lights, tires, emergency exits)., • Report mechanical issues promptly and keep the bus clean and sanitary., • Obey all traffic laws and company safety standards., • Communicate with parents, school staff, and dispatch about student behavior or delays., • Demonstrate leadership and customer service skills. School Bus Driver Jobs are Perfect For: • Retirees looking for supplemental income, • Stay-at-home parents seeking daytime work, • Veterans transitioning into civilian roles, • Anyone seeking a second career or flexible job, • People who enjoy working with children You might be a good fit as a School Bus Driver if you: • Are at least 21 years old, • Have a valid driver's license for at least 3 years, • Are looking for a part-time schedule and summers off Great School Bus Drivers often bring skills such as: • Valid Class B License, • History driving with ride share companies or taxi services, • Previous experience as a teacher, CDL driver, social worker, classroom assistant, hospitality worker, or customer service or retail associate. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying flexible schedules, great pay, and unmatched support. Sign-On Bonus Expires 6/30/26* Conditions Apply First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Medical, Dental and Vision insurance options for Employee and Family. Disability & Life Insurance Packages.

Peace of Mind Life happens, and we've got you covered with Basic Life Insurance, Supplemental Life Insurance, and NYS Short-Term Disability (STD). Extra Protection Optional supplemental insurance products for added security. Care for Your Fur Family Access to pet insurance options to help with un

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

We help customers with their insurance and financial services needs, including Auto Insurance, Home Insurance, Life Insurance, Business Insurance, Health Insurance, and Renters Insurance. This busy insurance and financial services office has a passion to make a difference in the lives of others and

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Register new patients and verify billing, insurance, and demographic information at each visit. Verify insurance eligibility and obtain prior authorizations or necessary external reports. Assist with billing, coding, and insurance documentation as needed.

We help customers with their insurance and financial services needs, including Auto Insurance, Home Insurance, Life Insurance, Business Insurance, Health Insurance, and Renters Insurance. This busy insurance and financial services office has a passion to make a difference in the lives of others and

Location 140 Cooper Ave, Tonawanda, NY, 14150, United States.Description Requirements Summary.

Medical, Dental, Vision, & Pet Insurance.

Waste Connections - - Responsibilities: Answering customer calls and processing customer orders for new service, discontinuance, or changes in service; Accepting payments from customers, researching customer billing inquiries and updating customer account information; Interacting with customers and

Medical, Vision, Dental, & Life Insurance/Short & Long Term Disability.

Centers Health Care - 17 Madison Street - Responsibilities: Greet visitors and callers; Answer telephones and route calls; Provide visitors with information such as company address, directions to the company location, website, and other related information; Maintain and manage calendars for conferen

Are you passionate about pets and love connecting with people who feel the same?.At Finger Lake Pet Resort, we're seeking a warm and friendly Customer Service Representative to be the first point of contact for our valued clients and their furry friends.In this role, you'll be responsible for greeti

Customer Service Representative.With Raymour and Flanigan, you'll quickly learn that our core beliefs are about you! We believe that if we treat our associates well, they will treat our customers well.We will continually ask you to think outside of the box to raise the bar in our business and we wil

Were seeking a passionate and empathetic Customer Service Representative to join our Corporate Customer Service Center in Batavia, NY.In this role, youll be the heart of our customer experience, resolving concerns, managing warranty inquiries, and coordinating solutions across multiple states.With t