Local driver jobs in Orlando, Florida - Page 3Create job alerts

Immediate Opportunities: Full-time Local Class A CDL Truck Drivers • Average $95000 annually • Home daily • Driver referral bonus program up to $5000 per referral You will drive: • Late model, Penske Truck Leasing trucks • Best-in-class specs designed for comfort • Equipped with inward a

CDL Truck Driver must have a minimum of 12 months Class B driving experience in the past 3 years (Bus Driving not included). Class B CDL Truck Driver needed in the Orlando, FL area that is flexible to make local runs. CDL Truck Driver must have an Acceptable MVR & Accident History.

Job Description Pay Rate: Minimum $18.65 hr - Maximum $19.00hr Our wage ranges are based on paying competitively for our company's size and industry and are one part of the total compensation that may also include incentives, benefits, and other opportunities at PODS. In accordance with New York, Colorado, California, Washington and other applicable laws, PODS is required to provide a reasonable estimate of the compensation range for this role. Individual pay decisions are ultimately based on a number of factors, including qualifications for the role, experience level, skillset, geography, and balancing internal equity. A reasonable estimate of the current wage range is listed below. JOB SUMMARY Responsible for operating forklift to load and unload containers; assist with ensuring a safe and clean working environment, inside and out, for assigned storage center location. ESSENTIAL DUTIES AND RESPONSIBILITIES · Operate the forklift to load and unload containers from local delivery and inter-franchise drivers, new container inventory, repositioning and customer access; load trucks for first route & stage IF and access · Follow AM SOP by printing routes & pulling ancillary when assigned · Assist Market Manager with routing · Insure that all full containers staged outside during the day are returned to the warehouse each night · Maintain PODHUNTER · Fuel forklift, complete daily forklift inspection reports and maintain those records onsite; notify manager of needed repairs · Assist with ensuring a safe and clean working environment, inside and out, for assigned facility · Print and time-stamp all waybills; may scan and upload contracts, addendums and other documents · When required, repair damaged containers · Maintain contact with drivers as needed, assisting them with their daily routes · May perform other duties and responsibilities as assigned JOB QUALIFICATIONS: Education & Experience Requirements · High School diploma or equivalent · 4-6 years storage center experience preferred · Previous forklift experience required · Ability to obtain Forklift Driver Certification · Possess basic computer skills i.e. data entry and knowledge of Microsoft Office · Possess math skills sufficient to perform required duties · Or an equivalent combination of education, training or experience DISCLAIMER The preceding job description has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this position. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be required by employees in this job. Equal Opportunity, Affirmative Action Employer PODS Enterprises, LLC is an Equal Opportunity, Affirmative Action Employer. We will not discriminate unlawfully against qualified applicants or employees with respect to any term or condition of employment based on race, color, national origin, ancestry, sex, sexual orientation, age, religion, physical or mental disability, marital status, place of birth, military service status, or other basis protected by law. If there are any questions pertaining to this job posting, please contact PODS Recruiting Team at General Benefits & Other Compensation for PT Roles: • Incentive pay (if applicable), • Personal Protective Equipment Provided, • 401K (must meet hour requirements), • Employee Assistance Program (EAP)

Job Description Discover your next career at Mygrant Glass! About Us: Mygrant Glass was established in 1926, we've journeyed from a single location in California to becoming the largest independent wholesale distributor of automotive glass in the United States. Our enduring success is built on a foundation of unparalleled inventory, an extensive warehouse network, and uncompromising quality standards. We thrive on forming lasting partnerships that drive the success of our valued customers. Driver/Warehouse Associate Nonexempt Reports To: Branch Manager Shifts: M-F, some Saturdays. ESSENTIAL JOB FUNCTIONS: • Unload inventory from incoming vehicles. Inspect inventory for damage. Process and stock inventory., • Pick correct product and quantities for orders and/or transfers. Load racks and trucks with glass., • Clean glass, assessing stock for damage. Affix proper labels to glass., • Timely follow delivery route and time schedules to deliver product and receive returns. Process/record payments and input data into ordering system., • Safely operate the delivery vehicle., • Receive and process return stock., • Complete logs and documentation., • Break down boxes, stock accessories, organize inventory as directed., • Interact and assist customers during delivery and at will call., • Assist in maintaining appearance of branch as needed. Clean warehouse, counter area, etc., • Adhere to health & safety policies and quality standards., • Perform other job tasks as assigned. QUALIFICATIONS: • Pass an MVR check, • Safely and competently operate forklifts, reach trucks, pickers, • Have 3-5 years of driving and delivery experience, • Excellent communication and organizational skills, • Strong interpersonal and problem-solving abilities, • Be organized, detail orientated, accurate, and adaptable to warehouse environments, • Ability to work well under pressure in a fast-paced environment, • Ability to work cohesively as part of a team, and or take direction in an ever-changing working condition EDUCATION AND LICENSING REQUIREMENTS: • High school diploma, GED, or equivalent, • Valid Driver’s License required, • Pass and maintain Forklift certification required, • CMV DOT Medical Card preferred Join our team: We are a passionate and close-knit community of individuals who believe in the power of teamwork and provide friendly, knowledgeable, and prompt service. At Mygrant Glass, we don't just offer jobs; we offer opportunities to nurture your career with one of the nation's leading wholesale auto glass companies. Benefits: Health Insurance Flexible Spending Plan Health Savings Plan Dental Insurance Vision Insurance Paid Time Off Paid Sick Time Paid Holidays 401K/with matching Overtime Pay (when offered) "We do not accept resumes or applications submitted through recruitment agencies. All applications should be submitted directly by the candidate themselves. Additionally, if we were not aware of your agency’s involvement prior to receiving the resume or application, please understand that we will not be bound by any agency terms or conditions." PHYSICAL DEMANDS: This position requires close visual acuity to perform activities such as: viewing a computer terminal/mobile device; visual inspection involving small defects, small parts; Ability to perceive the nature of sounds at normal speaking levels, and making fine discriminations in sound; Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Must have finger grip strength to properly handle glass. Must be able to remain in a stationary position and/or upright, for prolonged periods of time, traverse stairs, maneuver in tight spaces, reach overhead, squat, bend, kneel, stoop, and crouch occasionally during 8-10-hour work shift. OTHER: Mygrant Glass Company is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Mygrant Glass Company will provide reasonable accommodation(s) to all qualified applicants and employees with disabilities, where their disability affects the performance of their essential job functions, except when doing so would result in undue hardship. This job description is subject to change at any time by the Company. "We do not accept resumes or applications submitted through recruitment agencies. All applications should be submitted directly by the candidate themselves. Additionally, if wewere not aware of your agency involvement prior to receiving the resume or application, please understand that we will not be bound by any agency terms or conditions."

Job Description Company Overview: FCS Facility Services is a reputable janitorial services company dedicated to providing high-quality cleaning solutions to our clients. We specialize in maintaining cleanliness and hygiene in various facilities, ensuring a safe and comfortable environment for occupants and visitors alike. Our team is committed to excellence and strives to exceed expectations in every cleaning task. Position Overview: As a Driver/Cleaner at FCS Facility Services, you will be an integral part of our cleaning team, responsible for performing a variety of cleaning duties to uphold the cleanliness and sanitation standards of our clients' premises. The ideal candidate will be detail-oriented, dependable, and dedicated to delivering outstanding cleaning results while adhering to safety protocols and company policies. Key Responsibilities: * Trash Removal: Use company vehicle to collect trash from 10 designated points for our client. Qualifications: * Must have a valid Florida driver's license. * Knowledge of cleaning techniques, equipment, and chemicals. * Strong attention to detail and ability to follow instructions. * Good communication skills and ability to work effectively in a team. * Physical stamina and flexibility to perform cleaning tasks, including bending, kneeling, and lifting. * Dependability and punctuality. * Willingness to learn and adapt to new cleaning methods and procedures. * Willingness to undergo background checks and drug screenings as required. * Be able to lift/carry a minimum of 50 pounds. Full-time – 1st and 2nd Shift: 3 days (6:00 AM–2:30 PM) and 2 days (2:00 PM–10:30 PM). FCS Facility Services is an equal employment opportunity employer dedicated to promoting an inclusive, diverse, and innovative environment for our employees. We provide all qualified applicants with employment consideration without regard to race, color, religion, sex, pregnancy, childbirth, ancestry, national origin, age, protected veteran status, marital status, genetic information, gender identity or expression, sexual orientation, disability, or any other protected status in accordance with applicable federal, state, or local laws. Full-time – 1st and 2nd Shift: 3 days (6:00 AM–2:30 PM) and 2 days (2:00 PM–10:30 PM).

Border Patrol Agent (BPA) – in the Federal Security and Public Safety SectorExperienced (GL-9 GS-11)SAME MISSION, NEW DRIVE!You love protecting your community and doing your part to keep our nation safe. But maybe you're looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO)experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission.Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below).DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOWIMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits:Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11, $63,148 - $120,145 per yearLocality Pay: Varies by duty location.Overtime Pay: Up to 25%Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Recruitment Incentive Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.Retention IncentiveNewly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, MarfaBuffalo Sector Stations - Wellesley IslandDel Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, UvaldeEl Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, YsletaEl Centro Sector Stations - El Centro, Indio, CalexicoGrand Forks Sector Stations - PembinaHavre Sector Stations - Havre, Malta, Plentywood, Scobey, SweetgrassHoulton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van BurenLaredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, ZapataRio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, HarlingenSan Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San ClementeSpokane Sector Stations - Colville, Curlew, Metaline Falls, OrovilleSwanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, RichfordTucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, WillcoxYuma Sector Stations - Blythe, Yuma, WelltonDuties and Responsibilities:As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include:Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.Qualifications:GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as:Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level. GS-11: You qualify for the GS-11 grade levelif you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as:Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: CitizenshipYou must be a U.S. Citizen to apply for this position. ResidencyYou must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age RestrictionIn accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' PreferenceYou may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal TrainingAfter you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply:Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp.NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Company:US3080 Sygma Florida (The Sygma Network, Inc)Sales Territory:NoneZip Code:32837Travel Percentage:0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco's actual pay range but ismerely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsPOSITION SUMMARY:To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards.ESSENTIAL FUNCTIONS/RESPONSIBILITIES:Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route. Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store). Picks up, loadsand unloadsdamaged goods and customer returns, and transports products back to SYGMA warehouseEnsures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly).Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard.Followspreferred work methods at all times, and immediately advisesmanagement team of any unsafe conditions.Maintainsand safely operatesall assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication.Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues.Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards.Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management.REQUIRED MINIMUM EDUCATION/EXPERIENCE High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records.CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS:Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment.KNOWLEDGE, SKILLS AND ABILITIES:Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices.Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems.PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 50 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.WORK ENVIRONMENT:The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor.Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions.This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity.EEO/AA EmployerBENEFITS INFORMATION:For information on Sysco's Benefits, please visit OVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States.We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector Experienced (GL-9 GS-11) SAME MISSION, NEW DRIVE! You love protecting your community and doing your part to keep our nation safe. But maybe you’re looking for a change of scenery? USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country. Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission. Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below). DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required. U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities. Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Base Salary: GL-9/GS-11, $63,148 - $120,145 per year Locality Pay: Varies by duty location. Overtime Pay: Up to 25% Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level. All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings. Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa Buffalo Sector Stations - Wellesley Island Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations - El Centro, Indio, Calexico Grand Forks Sector Stations - Pembina Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations - Blythe, Yuma, Wellton Duties and Responsibilities: As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations. Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations. Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband. Performing farm checks, building checks, traffic checks, city patrols, and transportation checks. Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission. Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence. Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws. Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system. If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level. GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official. Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official. Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment. The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants. There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans’ Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy. How to Apply: Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions. You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam. If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: careers.cbp.gov/s/usbp. NOTE: As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Do more than make ends meet. Deliver with Gopuff and get paid to deliver what your neighbors need from a Gopuff facility near you! With one centralized pickup location and smaller delivery zones, Gopuff makes earning effortless. It's simple: deliver from a facilitynear you straight to the customer! You'll be delivering everyday essentials, from cleaning supplies, home needs and OTC medications to food, drinks and more. Sign up to be a Gopuff Delivery Partner today and experience the easiest way to earn big!Why should you partner with Gopuff?Earn an upfront amount for every order you deliver, even if it's canceled by the customerKeep 100% of your tips + earn extra with special incentivesEarn Wait Pay when you schedule your time with us (varies by market)Choose your own schedule and deliver when you wantNo restaurants, no riders - deliver from a familiar, centralized facility. That's it!What you'll need to get started:Be at least 21 years or olderValid U. S. driver's licenseVehicle with insurance + registration in your nameSmartphoneWilling & able to pass a pre-paid alcohol delivery training course (where applicable)How it works:Login to the Gopuff Driver app from your local facilityGet trip offers and pick up your orders insideDeliver to happy customersNo previous delivery experience required. Sign up today and start earning!Delivery Driver Partners will be independent contractors. Delivery Driver Partners must have a valid driver's license, minimum auto insurance and complete a background check. Delivery Driver Partners will use their own reliable car, smartphone, and data + text plan. Driving with Gopuff is perfect for those seeking part time work, seasonal work, temporary work or a flexible opportunity. With flexible hours you can make your own schedule and drive as little, or as much as you want! Previous delivery experience as a delivery driver or courier driver is not required, but we encourage drivers from other delivery, gig, or ridesharing services to sign up.

Immediate Opportunities: Full-time Local Class A CDL Truck Drivers • Shuttle Positions: Average $70000 annually • Route Positions: Average $81994 annually • Local, home daily You will drive: • Late model, Penske Truck Leasing trucks • Best-in-class specs designed for comfort • Equipped w

BECOME A US FOODS DRIVER! Ready to build a career with a company that's leading the foodservice industry? Our Delivery Drivers start at $25.00 per hourwhile in training. After training drivers earn incentive pay. Most drivers work a 5-day or 4-day work week. We are looking for Delivery Truck Drivers who relish the chance to push their potential, grow and reap the rewards of joining the US FOODS family. We are looking for Delivery Truck Drivers who relish the chance to push their potential, grow and reap the rewards of joining the US FOODSfamily. We help YOU make it! US FOODS is one of the largest food distributors with a culture and history of promotion from within and unlimited career growth opportunities w/ ongoing job skills and leadership development training. US FOODS has a lot to offer: Home Every Night with local routes. US FOODSis the company built on YOU Matter , where your hard work is rewarded We are committed to compensation, benefits that respect, and reward our employees for their dedication and hard work Guaranteed minimum 40 hours per week Paid Training AND Paid Overtime Service recognition and employee rewards Excellent Leadership Main Ingredients of the Job As a US FOODSDelivery Truck Driver you will be critical to the US FOODSteam and one of the important faces of our organization. As a delivery truck driver, you will have an impact on our customers by delivering our meats, produce, frozen goods, groceries, dry goods, equipment, and supplies to their drop-off sites. Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. * Deliver best-in-class Customer Service. * Deliver customers' orders to meet scheduled delivery times and keep productivity. * Unload products with a hand truck and place items in customer storage area. * Able to perform repeated, manual heavy lifting of items up to 80 pounds. * Make frequent stops during a work shift. * Deliver product in inclement weather conditions. * Verify delivery of items with customers. * Collect money (cash or checks) where needed. What you bring to the table * Must be at least 21 years of age. * Must have valid CDL A issued by the state of legal residence with necessary endorsements and DOT (Department of Transportation) qualified. * Minimum 6 (six) months of commercial truck driving experience or 3 (three) months of foodservice or food and beverage truck delivery experience required. Great Delivery Drivers are crucial to the US FOODS team and one of the important faces of our organization. Our truck drivers strive for integrity and reliability, while building trusting relationships with customers. JOIN OUR TRANSPORTATION TEAM! Please check out our job preview video: "A Day in the life" Delivery Truck Driver Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. During training candidates are paid $25 per hours. After training, the expected rate for this role is between $65,000 and $90,000 per year with incentive pay. As applicable, this role will also receive overtime compensation, and component pay (i.e., based on cases, mileage, stops). ?Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Truck Drivers must visit the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit and click GO to login. If you can log into login, but are having trouble with the Clearinghouse registration, see "Clearinghouse Help" field on the clearinghouse page. Stay updated by following US FOODS on any of our social media platforms at the bottom of the page EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status

Class C drivers license (minimum). Ability to use a hand truck and pallet jacks.

Coleman Worldwide Moving has immediate openings for CDL driving positions in your area. Must be willing to travel (local, intrastate and/or interstate). Ability to operate a box truck or tractor trailer (as applicable to your CDL qualification).

This is for our GROVELAND YARD*BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Our Delivery Drivers start at $25.00 per hourwhile in training. After training drivers earn incentive pay. Most drivers work a 5-day or 4-day work week. We are looking for Delivery Truck Drivers who relish the chance to push their potential, grow and reap the rewards of joining the US FOODS family. We are looking for Delivery Truck Drivers who relish the chance to push their potential, grow and reap the rewards of joining the US FOODSfamily. We help YOU make it! US FOODS is one of the largest food distributors with a culture and history of promotion from within and unlimited career growth opportunities w/ ongoing job skills and leadership development training. US FOODS has a lot to offer: Home Every Night with local routes. Work Schedule Monday- Saturday starting in the early morning until finished US FOODSis the company built on YOU Matter, where your hard work is rewarded We are committed to compensation, benefits that respect, and reward our employees for their dedication and hard work Guaranteed minimum 40 hours per week Paid Training AND Paid Overtime Service recognition and employee rewards Excellent Leadership Main Ingredients of the Job As a US FOODSDelivery Truck Driver you will be critical to the US FOODSteam and one of the important faces of our organization. As a delivery truck driver, you will have an impact on our customers by delivering our meats, produce, frozen goods, groceries, dry goods, equipment, and supplies to their drop-off sites. Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. Deliver best-in-class Customer Service. Deliver customers' orders to meet scheduled delivery times and keep productivity. Unload products with a hand truck and place items in customer storage area. Able to perform repeated, manual heavy lifting of items up to 80 pounds. Make frequent stops during a work shift. Deliver product in inclement weather conditions. Verify delivery of items with customers. Collect money (cash or checks) where needed. What you bring to the table Must be at least 21 years of age. Must have valid CDL A issued by the state of legal residence with necessary endorsements and DOT (Department of Transportation) qualified. Minimum 6 (six) months of commercial truck driving experience or 3 (three) months of foodservice or food and beverage truck delivery experience required. Great Delivery Drivers are crucial to the US FOODS team and one of the important faces of our organization. Our truck drivers strive for integrity and reliability, while building trusting relationships with customers.JOIN OUR TRANSPORTATION TEAM! Please check out our job preview video: "A Day in the life" Delivery Truck Driver Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. During training candidates are paid $25 per hours. After training, the expected rate for this role is between $65,000 and $90,000 per year with incentive pay.As applicable, this role will also receive overtime compensation, and component pay (i.e., based on cases, mileage, stops).?Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Truck Drivers must visit the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit and click GO to login. If you can log into login, but are having trouble with the Clearinghouse registration, see "Clearinghouse Help" field on the clearinghouse page. Stay updated by followingUS FOODSon any of our social media platforms at the bottom of the pageEOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status

The Warehouse Technician / Driver is responsible for the below responsibilities. Warehouse Technician / Driver - Job Description. The main duties of the Driver/General Labor are local Central Florida deliveries and pickups and assisting as general labor in the warehouse.

Job description:HOME DAILY/LIGHT TOUCH FREIGHTCompany Overview:We are currently looking for skilled Owner/Operator Truck Drivers to join our dynamic team at our terminal in the Jacksonville, FL area. Partnering with CDL-A Owner Operators in Jacksonville, FL. As a Truck Driver, you will play an essen

Ready to put your truck-driving career in high gear? Make the shift and fuel your career as a CDL Class A Truck Driver for Penske. Immediate Opportunities: Full-time Local Class A CDL Truck Drivers. Late model, Penske Truck Leasing trucks.

Ready to put your truck-driving career in high gear? Make the shift and fuel your career as a CDL Class A Truck Driver for Penske. Immediate Opportunities: Full-time Local Class A CDL Truck Drivers. Late model, Penske Truck Leasing trucks.

Our truck drivers have the opportunity to work for multiple Fortune 1000 companies, locate temporarily in new markets, or work for a single customer full-time. Multiple job opportunities with just one application - our truck drivers have the opportunity to work for multiple Fortune 1000 companies. A

Jones Welding & Industrial Supply, Inc is looking for a Warehouse worker and Delivery Driver to join our team! In the hot shot Delivery Driver portion of the position, you are a key member of the team! You are responsible for delivering smaller local orders of welding goods and cylinders to our clie

The driver will depart Orlando each evening, deliver to Lakeland and Tampa (with unloading at each stop), and return to Orlando upon completion. This is a consistent evening schedule, M-F, that offers steady hours and competitive pay.

Job Description We believe the future of our nation's roadways is automated, safer, more accessible and enables more efficient movement of people and goods. While billions have been invested into developing vehicle technologies – including advanced driver assistance systems ("ADAS") and autonomous driving solutions – a small fraction has been spent on developing infrastructure to support and enhance roadways. At Cavnue, we are developing and integrating technologies that will power the world's most technologically advanced roadways ("cavnues"). Our approach is founded in creating a digital model of the roadway that analyzes and optimizes road conditions in real-time, sharing actionable alerts and providing proactive guidance to vehicles and drivers. Join us in innovating the roads of the future. Cavnue is bridging vehicle technology and road infrastructure to rapidly deliver safer roads today while accelerating the adoption of connected and automated vehicles (CAVs) moving forward. With ongoing deployments in Michigan and Texas, Cavnue is the only company in North America that uses Smart Road technology to improve performance for road operators and deliver a safer, more efficient experience for all road users while preparing for a future with more CAVs. Our mission is to set the new standard for road performance and safety. Role Overview As a Platform Operations Engineer / Field Systems Engineer (Florida), you will serve as the primary owner of operations and product execution for statewide IoT deployments, driving the tools, workflows, and systems required to support reliable field operations. This role focuses on building and deploying the tools, interfaces, and integrations that enable seamless operation and maintenance of roadway infrastructure. You will bridge the gap between core software systems and field operations, ensuring contractors are equipped with automated workflows and actionable insights to meet strict SLAs and resolve issues efficiently. This role will require regular on-site field work at roadside infrastructure deployments in Orlando, Florida, supporting real-time field operations and issue triage, with occasional travel across our other projects in Florida and Georgia, as needed. Roles & Responsibilities • Product Operation Ownership: Act as the Product Owner for Florida operations, focusing on streamlining field support workflows while partnering with Product Management on roadmap priorities, • Tool & UI Building: Design and develop custom scripts, dashboards, JavaScript-based user interfaces, and API integrations that connect the core platform to O&M contractor systems, • Edge Deployment: Package and deploy diagnostic tools and user interfaces directly to edge devices, enabling effective on-site troubleshooting, • Contractor Enablement: Enable field contractors by building automated alerting systems, intuitive operational tools, and delivering hands-on training, • First Line of Defense: Serve as the first line of defense for system issues, including triage, remote troubleshooting, configuration updates, and software resets, • Field Triage and Dispatch: Coordinate field interventions by equipping crews with precise, pre-diagnosed issue reports when physical resolution is required, • Operations Automation: Work within our core operational framework (Proxmox, Kubernetes, Terraform) to manage state-specific configurations. Partnering with our engineering organization, building the specific IaC, tools, and automation scripts, • Field Quality Oversight: Oversee operational readiness of new deployments, ensuring field hardware (e.g., cameras, switches) is fully integrated prior to go-live, • Experience supporting field operations and issue triage within roadway infrastructure, transportation systems, or similar large-scale physical deployments, • Experience working within Linux environments, container orchestration platforms (e.g., Kubernetes), and virtualization systems (e.g., Proxmox), • Strong scripting and automation experience (Python, Bash, and/or Go) combined with frontend experience (JavaScript) to build intuitive, lightweight user interfaces for field crews., • Familiarity with deploying applications to edge devices and IoT hardware environments, • Working knowledge of networking fundamentals (e.g., VLANs, routing, IP configuration) for troubleshooting connectivity issues, • Ability to translate complex system issues into clear, actionable workflows or tickets (e.g., Jira, ServiceNow), • Strong communication skills with the ability to interface effectively with both technical engineering teams and field-based personnel, • Highly self-directed, with the ability to operate independently while collaborating across distributed teams, • Experience integrating monitoring tools (e.g., Prometheus, Grafana) with third-party systems, • Familiarity with SAFe Agile methodologies, particularly in a Product Owner capacity, • Experience working with IoT systems, IP cameras, or field-deployed infrastructure We are building an incredible team of employees with diverse backgrounds and experiences. We believe that great work can occur anywhere and are open to considering candidates who meet our needs who reside outside our geographic footprint. We also value the impact that can result from co-located teams and some roles may require regular presence in one of our offices. Cavnue is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need more information or require a reasonable accommodation to participate in the application or hiring process due to a disability or limited English proficiency, please contact Human Resources at 888-451-6822 ext. 55214. Individuals with hearing or speech impairments may dial 711 to access Telecommunications Relay Services (TRS). Notice: The above job description is intended to convey a general sense of the position's responsibilities and expectations and does not describe all duties that may be assigned. As business needs evolve, the duties and responsibilities of this position may change. Employment in this position is contingent upon the successful completion of applicable pre-employment background checks and substance screening, conducted in accordance with applicable law.

Job DescriptionDescription: About Nautique Boat Company With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Job Summary: The CAD Engineer II plays a key role in developing and managing 3D CAD models and technical drawings that support product design, engineering, and manufacturing processes. This mid-level role emphasizes 3D modeling as a primary responsibility, ensuring accurate, functional digital representations of parts, assemblies, and systems. Working with moderate supervision, CAD Engineer II transforms rough design concepts into complete and detailed CAD deliverables, while coordinating closely with engineering and design teams to ensure quality and compliance with specifications. Key Responsibilities: • Utilize CAD software to create 2D and 3D models using SolidWorks or similar CAD software., • Collaborate with more senior engineering and project managers to understand the design requirements., • Ensure compliance with relevant regulations, standards, and company policies throughout the design process., • Works on projects of moderate to high complexity with support., • Generate engineering models, drawings, and bills of materials for new designs under direction., • Interpret engineering sketches, layouts, and verbal instructions to produce accurate CAD outputs., • Maintain organized project files and documentation for easy access and review., • Approve mechanical models and drawings for release., • Creates 3D models for tooling., • Resolve discrepancies between design intent, markups, and final deliverables., • Assist in the development and design of composite parts and molds., • Generate engineering change notices as required., • Evaluate vendor-supplied items for their suitability regarding fit, finish, and performance., • Gain exposure to some of the more complex tasks within the job function., • Complete other functions assigned by supervisor. Skills and Abilities: • Proficiency in CAD software, particularly SolidWorks., • Strong understanding of mechanical design principles and materials., • Ability to create and interpret technical drawings and specifications for productions product requests., • Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization., • Demonstrated organization and project management skills., • Strong analytical and conceptual thinking skills., • Problem-solving skills and willingness to take initiative for decisions., • BS in Mechanical Engineering or related technical field., • Demonstrated proficiency in 3D CAD Modeling experience, preferably SolidWorks and NX., • 2 to 4 years of CAD experience within a manufacturing environment., • Understanding of engineering principles and design practices., • Desire to work in a “hands-on” environment. Knowledge, Education, and/or Experience Preferred • Experience in the marine industry., • Experience with the development of composite parts., • Knowledge of composite molding process., • Experience with technical drawings and documentation., • Ability to trailer a boat and operate. Physical Demands • Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally., • Must be able to bend at the waist and knees and stand for extended periods of time., • Must be able to lift 25 pounds when necessary., • Must be a licensed driver with a good driving record (subject to MVR). Equal Employment Opportunity Statement Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law. Americans with Disabilities Act (ADA) Statement Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.

Job Description As a Ready-Mix Truck Driver at Sea Glass Concrete, you will be responsible for safely and efficiently delivering ready-mix concrete to various job sites. This role requires driving a concrete mixer truck, operating equipment, and adhering to safety regulations. Key Responsibilities: * Safe Driving: Operate the truck in accordance with DOT regulations and local traffic laws. * Load Management: Ensure proper load distribution and adjust as needed. * Product Quality: Verify concrete consistency, slump, and color to meet customer specifications. * Customer Service: Deliver products to the correct locations on time and provide excellent customer service. * Equipment Maintenance: Perform routine inspections and maintenance on the truck. * Safety: Adhere to all safety regulations and company policies. * Teamwork: Collaborate with other team members and support company objectives. Qualifications: * Valid commercial driver's license (CDL A or B) * Strong driving record (no DUIs/DWIs in the last 5 years, no more than 3 moving violations in 3 years) * Ability to read, write, and speak English * High school diploma or equivalent preferred * Physically fit to perform the duties of the job, including lifting, pushing, pulling, and climbing Working Conditions: * Exposure to extreme weather conditions, noise, and outdoor elements * Must wear protective equipment Benefits of Joining Sea Glass Concrete: * Challenging and rewarding projects * Collaborative and supportive work environment * Opportunities for growth and development * Competitive compensation and benefits package If you are a dedicated and reliable individual with a strong work ethic, we encourage you to apply for the Ready-Mix Truck Driver position at Sea Glass Concrete.

Job DescriptionDescription: The Safety and Support Specialist is a multifaceted role that involves maintaining a safe and secure environment, supporting outreach efforts to individuals experiencing homelessness, and providing transportation when required. The role requires flexibility, situational awareness, and a compassionate approach to engaging with vulnerable populations. Individuals in this position play a key part in ensuring daily operations run smoothly while upholding the organization’s mission of service and dignity. Requirements: Responsibilities and Duties: Security Officer • Monitor and ensure the security of premises and personnel, • Conduct regular patrols and inspections of facilities and grounds, • Conduct security checks and monitor security cameras, • Respond to crises and emergencies promptly, • Enforce company policies and procedures to maintain a safe environment, • Report and document incidents and safety concerns, • Assist program participants with accessing services and resources, including but not limited to showers, laundry, and mail services, • Perform outreach duties at different locations within the tri-county area as needed, • Engage with community members to provide support, resources, and information, • Safely operate company vehicles to transport program participants, materials, or equipment, • Transport company trailers to various locations for outreach operations as needed, • Conduct vehicle inspections and maintenance checks as needed, • Maintain accurate records of mileage, fuel usage, and maintenance activities Requirements • High school diploma or equivalent required; relevant certifications or higher education is a plus, • Proven experience in security, driving, or outreach roles preferred, • Valid driver’s license with a clean driving record, • Class D Security license, • Strong communication and interpersonal skills, • Ability to work independently and as part of a team, • Good problem-solving skills and the ability to handle stressful situations effectively, • Ability to lift to 50 pounds, • Ability to stand, walk, sprint, run, and patrol for extended periods, • Must hear and see well (either naturally or with correction), • Must be able to bend, stoop, squat, kneel, push, pull, and reach overhead, • A considerable amount of time making repetitive motions, • Work in a fast-paced environment with frequent interactions with customers, • Ability to function with frequent temperature changes between indoors and out, • Work in various weather conditions, including heat, cold, and rain, • Stand and walk continuously for up to 8-10 hours during a shift while providing customer care, • Considerable amount of time using a telephone and computer, • Use hands and fingers for precise mouse movements and keyboard shortcuts, • Review and analyze printed materials for accuracy and quality, • Attend meetings and collaborate with team members in various office settings, • Collaborate with colleagues and communicate professionally in person and via email, • Use a headset to communicate with customers over the phone for extended periods, • Navigate between multiple software systems to access customer information SALT Outreach, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Drug-Free Workplace Program Statement SALT Outreach, Inc. is dedicated to maintaining a safe and drug-free workplace. We strictly prohibit the use, possession, sale, or distribution of illegal drugs or unauthorized controlled substances on our premises or during work hours and prohibits team members and volunteers from reporting to work, working, or being present on company premises while under the influence of alcohol, illegal drugs, or other unauthorized substances or with measurable quantities of alcohol, illicit drugs or other unauthorized substances present in the body. We reserve the right to conduct random drug tests of all our team members and volunteers. Violating this policy, including a positive drug test, may lead to disciplinary action, including termination.

Job Description SELLING EVENT SPECIALIST / BRAND AMBASSADOR Infinity Provisions, a Boars Head® Brand Purveyor in Orlando / Central Florida is currently seeking a Selling Event Specialist / Brand Ambassador for the promotion of our food products at our local Publix Stores. Our Selling Specialist / Brand Ambassador position is a fun and exciting job opportunity promoting our well-known Boars Head® brand of quality meats, cheeses, and retail products at our local Publix stores. We are seeking an enthusiastic, creative, and friendly individual to interact and introduce customers to our products; through in-store events and food sampling with an emphasis on brand awareness while building customer loyalty. Paid training, support and all needed supplies will be provided for you to get you comfortable in your new role with our company. Current position is full-time. Must be available Thursday through Sundays. Requirement for Brand Ambassador position: • Seeking individuals who are creative with recipes, enjoy creating appealing food displays and are very comfortable engaging with customers., • Must be able to stand for six hours and lift 10 lbs comfortably., • Must be comfortable promoting products that are for immediate sale., • Must have dependable transportation and a valid driver license., • Must have a professional, enthusiastic demeanor., • Must be able to read, write and communicate clearly., • Must be able to work independently and follow instructions well. Job Types: Contract, Full-time Salary: $17.00-20.00 per hour Benefits: Job Type: Full-time Salary: $16.00 - $17.00 per hour Schedule: • 8 hour shift, • Culinary: 1 year (Preferred)

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Optical Engineer. As a key member of MicroVision's Optical Systems Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will support the design, analysis, and realization of advanced LiDAR optical architectures. This role blends optical component ownership with significant interaction at the optical system level, supporting new product development from concept through early build phases. The engineer in this position will be responsible for defining optical component requirements, performing detailed analysis, and working directly with global optical suppliers to ensure designs meet performance, manufacturability, and quality expectations. This role emphasizes strong technical ownership, hands‑on validation, and close collaboration across optical, opto‑mechanical, mechanical, and electrical engineering teams. Objectives of This Role: • Own optical component and subsystem definitions within LiDAR architectures, • Translate system‑level performance needs into clear optical requirements and specifications, • Ensure optical designs are robust, tolerant, and manufacturable, • Serve as a technical interface between internal teams and external optical suppliers Your responsibilities: • Design and analyze optical components and subsystems using Zemax (OpticStudio), • Perform optical system analysis, including performance trade studies and sensitivity assessments, • Conduct FRED based non sequential and stray light analysis, • Perform optical tolerance analysis to assess alignment and manufacturing sensitivities, • Support lens design, optimization, and performance evaluation, • Define and document lens requirements, coatings and optical specifications, • Develop and execute optical lab setups for model validation and hardware characterization, • Work closely with global optical suppliers to review designs, specifications, and manufacturing approaches, • Provide technical guidance and review of optical designs and analyses across programs, ensuring consistency, rigor, and best‑practice application, • Collaborate with opto-mechanical engineers to define alignment strategies and tolerances, • Support documentation, reviews, and technical decision making throughout development phases Our requirements:, • 7–15+ years of industry experience in optical engineering with a Bachelor’s of Science degree in Optics, Physics or related field., • Strong proficiency with Zemax (OpticStudio) for modeling, optimization, and tolerance analysis, • Hands‑on experience with lens design and optical component development, • Demonstrated ability to perform optical system‑level analysis, • Experience defining optical requirements and specifications, • Hands-on experience developing and analyzing solutions using MATLAB, Python, or similar programming tools, • Experience defining and reviewing optical coating specifications, • Hands‑on experience designing and executing optical lab setups, • Experience working with global suppliers on optical components, • Experience using FRED for stray light and non‑sequential optical analysis, • Experience with laser‑based optical systems, • Background in LiDAR, imaging systems, or active optical sensors, • Familiarity with opto‑mechanical integration and alignment methods, • Experience supporting new product development or early production builds, • Experience interacting directly with optical vendors during development cycles We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

Job DescriptionAbout us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Mechanical Engineer – Precision Mechanical Design. As a key member of MicroVision's Mechanical Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will support the design and development of next‑generation electro‑optical sensor products. This role is responsible for owning mechanical designs from early concept and architecture definition through detailed design, system integration, and release, ensuring solutions meet performance, cost, manufacturability, and quality requirements. The engineer in this role will design and own precision mechanical components and assemblies within a highly integrated, multidisciplinary system. This position emphasizes hands‑on mechanical design, strong documentation rigor, tolerance control, and close collaboration with electrical, optical, systems, manufacturing, and program teams throughout the product development process. This position is expected to provide mechanical technical oversight, guiding architecture decisions, trade studies, and design rigor across the product. In this role you will: • Design and own precision mechanical solutions for advanced electro‑optical sensor products, • Translate system‑level requirements into robust mechanical architectures and detailed designs, • Balance performance, cost, reliability, and manufacturability through disciplined engineering practices, • Enable smooth system integration through strong interface definition and cross‑functional execution, • Drive mechanical design rigor across documentation, change management, and risk mitigation, • Contribute to the realization of new technology through concept development and iterative design Your responsibilities: · Lead design and development of precision mechanical components and assemblies for electro‑optical sensor systems· Drive early concept and architecture development, including trade studies, layout exploration, and mechanism concepts· Create and maintain 3D models, detailed drawings, and GD&T to support robust, repeatable designs· Perform tolerance analysis and support design decisions related to form, fit, and function· Own and manage Bills of Material (BOMs), part structures, and configuration control within a formal PDM/PLM environment· Lead and execute Engineering Change Requests (ECRs) and Engineering Change Orders (ECOs), including technical impact assessment across disciplines· Apply structured problem‑solving methodologies (e.g., 8D) to resolve design, manufacturing, or quality issues· Develop and maintain Design Failure Modes and Effects Analyses (DFMEAs) to identify and mitigate mechanical risks· Drive Design‑to‑Cost, Value Engineering, and Value‑Add initiatives across mechanical designs and supplier components· Collaborate closely with manufacturing engineering, program management, electrical, optical, and systems teams to ensure alignment on requirements, interfaces, and system performance· Coordinate technical engagement with suppliers and contract manufacturers to support mechanical design, fabrication, and process development· Lead internal design and program reviews, contributing mechanical input to cross‑functional technical decisions Our requirements: • 10–15+ years of mechanical engineering experience in precision or complex hardware products, • Strong foundation in mechanical design, drafting, and GD&T (SolidWorks), • Demonstrated experience owning mechanical designs from concept through release, • Knowledge of designing precision components for injection molding, machining, die casting, and metal injection molding (MIM) processes, with an understanding of material selection and manufacturability tradeoffs, • Hands‑on experience managing BOMs, configuration control, and formal change management processes (ECO/ECR) through PLM system (Arena), • Practical application of structured problem‑solving methodologies such as 8D or equivalent, • Experience developing and maintaining DFMEAs, • Familiarity with Design‑to‑Cost and Value Engineering approaches, • Experience serving as mechanical lead or subsystem owner on a hardware product, • Background in precision electro‑mechanical or opto‑mechanical systems, • Experience supporting products across concept, development, validation, and release phases, • Exposure to supplier‑driven design optimization or cost reduction initiatives, • Experience working in a regulated industry such as automotive, defense, aerospace, or safety‑critical products, including adherence to structured development and documentation processes MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

Job Description About us: With offices in the U.S. and Germany, MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Florida, Washington State, Washington D.C., Hamburg, Germany and Orlando, FLorida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. Job Summary: MicroVision has an immediate opportunity for a Staff RTL Engineer. As a key member of MicroVision's growing Digital Design Engineering team, you will collaborate with various technical teams in the company to design and take into production, market defining Automotive LiDAR product. The right candidate for this position will be a highly motivated FPGA/RTL Engineer with a breadth of understanding in FPGA design and best practices, including detailed design, System Verilog coding, modelling, simulation, verification, integration and test. Essential Duties and Responsibilities: * Derive FPGA requirements based on system requirements then create FPGA architecture to fulfill those requirements * Design, implement and test Register-Transfer Level (RTL) features and components guided by system architecture and requirements * Own the detailed design of assigned firmware components and subsystem functionality * Document test and implementation plans at unit at system levels and then execute on it. * Work with other teams to integrate developed features into system hardware. * Support bringing up RTL features developed by the team. * Coach/mentor junior members of RTL and integration teams to complete tasks. * Participate in the full software development life cycle (SDLC) flow including peer reviews of requirements, architecture, design, and code implementations within an approved ASPICE development flow. Required Knowledge, Skills and Abilities: * Knowledge of System Verilog, Verilog, Python programming languages * Proficient in FPGA Design methodologies from state machine design to DSP implementation * Experienced in closing timing in FPGA designs. * Mapping algorithms to FPGA appropriate logic implementations * Expert integrating and bringing up features in hardware. * Ability to work well in a fast-moving and complex environment. * Independently driven to complete project tasks * Experience with Configuration Management and Change Control concepts and tools (Git, Subversion, Jira, etc.) * Experience working with Functional Requirements and defining Requirement Based Tests * Experience performing HDL Synthesis/Simulation (eg. VCS, Synplicity, etc.) * Experience with design analyses (Timing, Lint, Clock Domain Crossings, Code Coverage, etc.) and IP compliance strategies * Experience designing portable, scalable Test Benches * Experience with UVM/OVM - Constrained random testing * Familiarity with hierarchical simulation and verification frameworks * Experience with intersystem communication protocols (I2C, UART, SPI, etc.) * Familiarity with microcontroller peripherals including one or more of the following: ADCs, DACs, Flash, EEPROM, timers and watchdogs * Working knowledge of data structures and algorithm fundamentals * Working knowledge of digital and analog electronics Preferred Knowledge, Skills, and Abilities * Knowledgeable of control systems and digital signal processing fundamentals * Proficient in other embedded software systems developed in C / Cpp / etc. * Hands on experience with High-Level Synthesis (HLS) * Excellent scripting and automation skills. Bash shell, python, Make/CMake, and TCL desired * Extensive project experience working on embedded laser applications including Lidar * Safety-critical industry experience. (FIT analysis, etc.) * Working knowledge of various computing architectures beyond FPGAs, such as DSPs, GPUs, or MCUs, and their associated hardware computing platforms used to program them * Experience with ASIC design & migration from FPGA prototypes to production ASICs Required Education and Experience: * BS in Electrical Engineering or related field and 7+ years of experience or equivalent combination of education and experience MicroVision offers flexible work schedule that could include a hybrid schedule of onsite and remote work subject to team and business needs. You must live and reside within commuting distance from MicroVision's office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the US without sponsorship. Benefits: MicroVision is also proud to offer a comprehensive benefit program including: * Competitive compensation and equity program * Choice between an HSA Medical plan or a Buy-Up PPO Medical plan * Dental plan 100% employer-paid for employees * Vision coverage Vision coverage 100% employer-paid for employees * 401k plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay) * Generous time off package including a flexible vacation program as well as incidental personal/sick days and floating holidays * Supplemental pay for Parental Leave * Company-paid basic life and AD&D insurance and long-term disability. MicroVision is committed to an inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

Job Description:\n\n TITLE: Director of Facilities and Fleet Operations PERFORMANCE PROFILE SOURCE: Management Professional DEPARTMENT: Operations REPORTS TO: Chief Impact Officer FLSA Status: Exempt WORKER CATEGORY: Full-Time EMPLOYMENT FUNCTION: Management POSITION SUMMARY: The Regional Director of Facilities and Fleet Operations is responsible for overseeing the strategic planning, management, and maintenance of all facilities and fleet assets across Boys & Girls Clubs of Central FL (BGCCF). This position ensures the safe and efficient operation of complex mechanical systems, buildings, and infrastructure while maintaining high standards of housekeeping, safety, and security. The director will manage and collaborate on capital projects, develop and implement annual operational plans, and contribute to long-range strategic planning in alignment with organizational goals. Reporting directly to the Chief Impact Officer, the Director of Facilities and Fleet Management supervises one direct report and guides other departments as needed. This role involves working closely with department leaders and Club Directors to ensure seamless operations through exceptional facilities and fleet services. The director will also oversee fleet management, including DoT compliance, maintenance and procurement processes, regulatory compliance, budgeting, and fleet inventory management while coordinating with other departments to optimize operations. The Director of Facilities and Fleet Management is expected to provide leadership, guidance, and training to facility and fleet staff, ensuring that all operations meet or exceed operational and safety standards and align with industry best practices. This position requires a proactive approach to identifying and managing improvement projects, ensuring that all facilities and fleet services support the mission and operational goals of BGCCF. ESSENTIAL JOB RESPONSIBILITIES: Facilities ManagementDevelop, implement, and monitor comprehensive maintenance plans for facilities, including HVAC, electrical, plumbing, and landscaping.Ensures compliance with federal, state, and local regulations regarding facility operations.Oversee regional housekeeping and security services to maintain a clean and secure environment at every club.Conduct regular inspections to identify and address maintenance needs, ensuring timely responses to service requests.Plan facility improvements for roofing, floors, and HVAC systems, maintaining an aging plan for system maintenance and replacement.Take on special projects, including new construction, working with architects and general contractors to ensure cost control and timely project completion.Develop, write, and update Standard Operating Procedures (SOPs) for facility systems, safety auditing processes, and implementation of open and closing procedures and checklists to ensure consistency and compliance across all operations. Fleet ManagementOversee the fleet management program, including vehicle acquisition, maintenance, and regulatory compliance.Manage CDL certification and training programs, collaborating with HR to document and track CDL credentials and approved driver status, monitor expiry dates, and facilitate timely license renewals to ensure compliance.Direct the end-to-end lifecycle of fleet vehicles, from procurement to disposal.Ensure fleet operations are safe, efficient, and compliant with all relevant regulations. Budgeting and PlanningDevelop and manage budgets for facilities and fleet operations, overseeing line items and ensuring fiscal responsibility.Create depreciation schedules for assets to ensure accurate financial planning.Participate in strategic planning to align facilities and fleet services with organizational objectives.Assist in the development of BGCCF’s multi-year capital improvement plan.Prepare reports for Executive Leadership or Board Committee as requested. Technology and SafetyImplement and streamline technology systems, including safety auditing and record-keeping systems, to monitor and store data on fire safety checks, driver pre-trip inspections, facility checks, and incident reports.Utilize safety auditing systems to ensure compliance and identify areas for improvement.Conduct regular safety audits to identify compliance gaps and implement corrective actions. This includes monitoring fleet safety metrics and using industry standards for fleet operations.Integrate telematics and driver monitoring tools to enhance fleet safety and efficiency.Provide comprehensive training to staff on new technologies and safety auditing systems to ensure smooth integration and minimize resistance to change.Establish key performance indicators (KPIs) to measure the effectiveness of technology integration and safety auditing systems.Coordinate and direct Club and Department supervisors and staff to ensure compliance with AHERA, OSHA Risk Management, and other required County, State, and Federal regulations.Direct and implement BGCCF Disaster Plan for all owned or leased facilities. Leadership and CollaborationProvide leadership and direction to subordinate staff, including performance evaluations and personnel decisions.Collaborate with department leaders to ensure seamless operations and support organizational goals.Play a key role in BGCCF’s Workforce Readiness Program by designing and implementing an annual immersion opportunity for teen interns, in collaboration with the Director of Teen Services, to teach valuable skills to BGCCF teens.Communicate effectively with all levels of the organization, from board members to frontline staff and youth members, navigating stressful situations with a service-oriented mindset.Support the Chief Impact Officer in negotiating leases for Club programs.Oversees vendor management, including negotiating contracts, ensuring contract fulfillment, and maintaining positive relationships with vendors.Maintain proficiency in current and emerging technologies in facilities management to ensure ongoing innovation and efficiency.Participates in safety visits by BGCA as needed and, if necessary, collaborates with Club staff to address any facility or vehicle issues identified during BGCA audits and site visits. QUALIFICATION REQUIREMENTS: (Knowledge, Education, Experience & Skills) EducationAssociates (AA) degree in Facilities Management, Engineering, Construction Sciences, or a related field. Equivalent combinations of education and experience will be considered. ExperienceMinimum of five years of progressively responsible experience in facilities management and fleet operations, with at least two years in a supervisory or management role.Experience in project management, budgeting, and strategic planning is preferred. KnowledgeStrong understanding of facilities management principles, including maintenance operations, safety protocols, and regulatory compliance.Knowledge of fleet management practices, including vehicle maintenance, procurement, and regulatory compliance.Familiarity with construction, architecture, and various systems, including HVAC, plumbing, and electrical.Understanding of budgeting principles and cost control strategies. SkillsProven ability to lead and manage teams effectively, including staff supervision, performance evaluations, and personnel decisions.Excellent written and verbal communication skills, with the ability to interact effectively with all levels of the organization.Strong problem-solving skills, with the ability to analyze complex issues and develop effective solutions.Experience in managing projects from conception to completion, ensuring timely and cost-effective outcomes.Highly proficient in using standard Microsoft Office tools (Word, Excel, PowerPoint, Outlook) and comfortable with budgeting software and systems for monitoring expenses and budgets.Experience with CRM systems, safety audit and maintenance management software, and other relevant technologies is also required.Ability to understand and ensure compliance with safety regulations, maintaining a safe working environment. This includes the ability to interpret complex safety laws and industry manuals, breaking them down into straightforward tools for compliance.Ability to stay updated on changes in safety regulations and industry standards, adapting policies as needed to ensure ongoing compliance.Exceptional service skills with a friendly and approachable demeanor. Certifications and LicensesValid driver's license required.Other relevant certifications (e.g., OSHA, LEED, FMP) are beneficial but not mandatory. KEY ROLE COMPETENCIES: Strategic Agility: Develops and executes strategic plans for facilities and fleet operations that align with BGCCF's mission, ensuring flexibility and adaptability in response to changing circumstances.Operational Excellence: Oversees the maintenance and improvement of facilities and fleet operations to ensure compliance and optimize resource utilization, achieving efficiency, effectiveness, and quality.Talent Management: Provides leadership and training to facility and fleet staff to attract, develop, and retain talent, ensuring they meet operational and safety standards.Collaboration and Influence: Collaborates with department leaders and external partners to build effective relationships and ensure seamless operations that support organizational goals.Risk Management: Conducts safety audits and implements safety protocols to identify, assess, and mitigate risks, maintaining compliance with federal, state, and local regulations to protect organizational assets. ADDITIONAL ACCOUNTABILITIES Supervisory ResponsibilitiesHire, supervise, train, coach, and mentor staff, volunteers, and interns. Provide leadership in delivering learning experiences for staff and youth to support the strategic goals of the Boys & Girls Clubs of Central FL, utilizing a range of instructional design techniques and delivery media, including leader-led, trainer-led, self-directed, and computer/web-based modules. RelationshipsInternal: Maintains close, daily contact with Club staff (professional and volunteer), Club members, and supervisor to exchange information, discuss issues, clarify guidelines and instructions, provide instruction, and offer advice and counsel. External: Maintains contact with members, families, alumni, community leaders, youth-serving professionals, other Clubs, media contacts, vendors, consultants, organizations, and others to achieve program goals and objectives, manage costs, share information, and resolve problems. Other ENVIRONMENTAL AND WORKING CONDITIONS:The position requires working in both indoor and outdoor environments, such as an office or club setting, which may involve exposure to varying weather conditions.Ability to read and interpret various documents, including safety rules, operating instructions, and policy manuals.Required to operate a motor vehicle.Work in environments frequented by children and families, requiring adherence to safety and conduct standards that ensure a child-friendly and family-oriented atmosphere.Oversees facilities and fleet operations across five central Florida counties: Orange, Seminole, Lake, Brevard, and Osceola.Requires regular travel to sites within these counties for inspections, meetings, and project management.Maintains regular attendance at the administrative support office in downtown Orlando to perform administrative duties, collaborate with the team, and participate in strategic planning.Provides 24-hour on-call support for urgent fire, security, and maintenance issues, ensuring that either the Director or a designated facilities team member is available to respond to emergencies at all times. PHYSICAL AND MENTAL REQUIREMENTS:Physically capable of performing duties on-site, including lifting up to 50 pounds, standing, sitting, or walking for extended periods, bending, reaching, and grasping.Operates a computer and other office productivity equipment such as a copy machine, phone, printer, and tablet frequently. Requires the ability to work on a computer for extended periods (8+ hours), including performing tasks that involve repetitive motion, visual focus, and fine motor skills.Operates a variety of machines and equipment, including vehicles, hand and power tools, climbs ladders, balances, crawls, and exerts physical effort to lift, push, pull, or carry heavy objects. This role requires standing for long periods, walking or running for extended distances, bending, twisting, stooping, crouching, or reaching with hands and arms. Additionally, it involves using fingers to grasp, move, or assemble small objects, maintaining balance in unstable positions, and supporting the body for long periods without fatigue.Visual and auditory acuity to monitor the environment and ensure safety standards are maintained.Mental resilience and the ability to stay focused and effective in a busy, sometimes noisy environment.Capacity to handle multiple tasks simultaneously and prioritize effectively.Strong interpersonal skills to interact positively with children, family members, and other staff.Exposure to outdoor weather conditions (occasionally). Pre-Employment and Ongoing Compliance Requirements:Candidates must successfully pass a pre-employment drug screening.Continued employment is contingent upon passing randomized drug screenings as part of our commitment to maintaining a drug-free work environment.Continued employment is also contingent on the Florida State Department of Children and Families employment designation of "eligible for employment" as a state-licensed youth-serving organization. Disclaimer: The information presented in this job description is intended to illustrate the general nature and level of work expected of employees in this classification. It is not a comprehensive inventory of all duties, responsibilities, qualifications, and objectives required of employees assigned to this job. Job responsibilities and requirements are subject to change based on the needs of the club and the direction of the Club Director and Chief Executive Officer. Department of Children and Families Level II Background Check - Please see the link below to the new Care Provider Background Screening Clearinghouse Education and Awareness website. This site was implemented under the directive of House Bill 531 (2025).

Job DescriptionCompany Description We Are Bosch. At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry. Let’s grow together, enjoy more, and inspire each other. Work #LikeABosch • Reinvent yourself: At Bosch, you will evolve., • Discover new directions: At Bosch, you will find your place., • Balance your life: At Bosch, your job matches your lifestyle., • Celebrate success: At Bosch, we celebrate you., • Be yourself: At Bosch, we value values. Summary The Delivery Driver - Warehouse Coordinator deals directly with our customers on a daily basis to ensure they have a positive experience. As a member of the branch team, this will primarily be accomplished through ensuring orders are picked and loaded correctly and efficiently directly to our customer vehicles, third party carriers, our own company vehicles or personally making the delivery in a company vehicle. This will be accomplished through coordinating logistics operations of the team through the safe and efficient operation of material handling equipment and company vehicles, ensuring effective inventory management, in compliance of company policy and government regulations This position supports the Branch Manager to ensure the overall success of the location. This may include, but not limited to, covering for the Branch Manager when absent or unavailable, assisting the Branch Manager to ensure the site is in compliance of processes and procedures, helping with all branch duties such as working as a Counter Sales Agent, safety, and other duties as required. Essential duties and responsibilities The Warehouse Coordinator assists the Branch Manager in all his duties, while being the daily face of the company to our customers, it is imperative to ensure they have a positive experience, while maintain our safety, quality, and other policies and standards. * • As a part of the branch team positively engage in our Zero Harm culture. Zero Harm is our vision that aims to eliminate all incidents, accidents, injuries, and harm in the workplace and to the environment. It is a commitment to ensure the safety and well-being of employees, contractors, and all individuals involved in our operations., • Ensure incidents, near-misses, and unsafe conditions are properly reported, and eliminated in a timely manner., • Ensure your PPE compliance and as a member of a team, help other do the same., • Ensure that vehicles and material handling equipment are operated in a safe manner in accordance with company policy, guidelines, and practices, and in compliance with government regulations. This includes but no limited to:, • Ensuring proper pre-trip and post-inspections are conducted., • That licenses and certifications are current and valid., • Posted speed limits are obeyed., • Minimizing idle time., • As a part of branch team delight our customers by providing quality products and services which meet or exceed their requirements and evolving expectations. This is achieved through a commitment to continuous improvement and the pursuit of a zero-defect culture., • Manage customer relationships and enhance the customer experience., • Engage in supporting the Branch Manager to enable the efficient operation of the branch in accordance with current guidelines, policies, practices, and procedures., • Proactively engage in the safe efficient operation of the warehouse:, • Proactively coordinating the team to maintain and ensure the warehouse is a professionally clean organized warehouse., • Shipping and receiving activities as required to assure that products are handled and stored in a safe and efficient manner., • Proper picking of orders including managing first in, first out (FIFO) compliance., • Receive returned product from customers – inspecting for damage, check packing slip for product accuracy, and securing returning product to ensure safe and undamaged return., • Enhance and improve inventory management., • Communicate daily with customers via phone, fax, e-mail, or in person., • Enter customer orders, look up parts, parts research, and warranties as required., • Promote and support sales promotions., • Actively collaborate with regional sales force and other field staff to deliver premier customer service., • Work closely with other vital departments such as credit, billing, shipping, purchasing, technical service, marketing, etc., • Research and resolve customer issues ad complaints., • Other duties as directed.Qualifications Qualifications, Education and/or Experience • 4-6 years of warehouse operations experience., • High School diploma or equivalent combined education and experience., • Strong interpersonal, customer relationship and decision-making skills., • Effective and professional communication and organization skills., • Ability to work effectively as a member of a team in a high-volume fast-paced environment., • Strong analytical skills., • Prior warehouse and forklift experience desired. Experience with a bar code / RF inventory management system a plus., • Proficiency in Windows and Microsoft Office Suite beneficial., • HVAC industry experience preferred. Additional Information Equal Opportunity Employer, including disability / veterans *Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date. Your well-being matters at Bosch! We offer a competitive compensation and a benefits package designed to empower you in every area of your life. This includes premium health coverage, a 401(k) with generous matching, resources for financial planning and goal setting, ample paid time off, parental leave, and comprehensive life and disability protection. We're investing in your success!

Job Description At Loews Hotels at Universal Orlando, our team members get to make a difference and have fun every day. Our world-class team brings to life the incredible, award-winning hotels located at Universal Orlando Resort. Named one of Central Florida's Top Workplaces and one of America's Best-in-State Employers by Forbes, we are committed to our ”power of we” culture. Are you looking for a place where you can bring your authentic self to work every day and be able to connect, engage and delight? * We offer excellent benefits and perks including one free meal per shift and free theme park access. * We have a dynamic culture that makes every day interesting, challenging, fulfilling and fun. * We embrace diversity at our core and offer the opportunity for all team members to reach their potential. * We invest in training and development opportunities for all team members. * We promote social responsibility by being a good neighbor in the community. * We care for you, just as we care for others. About Lakewood Regional Support Our regional support center provides resources to our hotels for multiple areas including Human Resources, Engineering, Purchasing, Accounting, Security, Group Reservations, Guest Contact Center, Information Technology, Laundry and Communications. Who We Are: Founded in 1960, Loews Hotels & Co operates iconic hotels and resorts across the U.S. Together, our diverse and welcoming teams craft exceptional experiences in iconic destinations. Growth and belonging start here; you'll be valued for who you are and the goals you have. Whether your next career chapter involves making memories for guests or supporting our properties in our Corporate Office, every role-from Guest Services to Finance, Culinary to IT-offers opportunities to grow and make a meaningful impact. Creating a Team Member experience where you belong no matter what race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status that makes you, you is a daily focus for us. What We Offer: • Competitive health & wellness benefits, 401(k) & company match, • Paid Sick Days, Vacation, and Holidays, Paid Bereavement, • Paid Pet Bereavement, • Training & Development opportunities, career growth, • Tuition Reimbursement, • Team Member Hotel Rates, other discounts, perks and more, • Admission and discounts at Universal Studios Florida, Islands of Adventure and Volcano Bay., • One free meal per shift What We're Looking For: A skilled professional with broad, hands-on experience across multiple building trades, including electrical, plumbing, HVAC, painting, and locksmithing. Someone who can ensure that equipment, building systems, and shared spaces operate safely, reliably, and efficiently. The ideal candidate takes pride in maintaining smooth daily operations and creating a positive, well-functioning environment for both team members and guests. Who You Are: • Safety minded and proactive in maintaining a secure and stable environment., • Service oriented with a collaborative approach that supports both team members and guests., • Professional and courteous, fostering a respectful and positive atmosphere., • Calm and solutions focused when addressing unexpected issues or challenges., • Detail minded with strong follow through and pride in quality workmanship., • Clear and constructive in communication, contributing to effective teamwork. What You Will Do: • Respond promptly to maintenance requests, trouble calls, and technical issues throughout the facility., • Operate a company vehicle to transport parts and equipment between vendors, job sites, and service areas., • Support the installation and upkeep of branded campus signage., • Perform routine inspections of building systems including HVAC, electrical, and plumbing to verify proper functionality and prevent failures., • Complete minor equipment repairs and support event setup activities as needed., • Handle hazardous materials in accordance with SDS requirements and established safety guidelines., • Document completed work accurately and provide timely updates to supervisors., • Maintain clean, organized, and well stocked workspaces and assist in shop inventory/par management., • Attend required meetings and training sessions while adhering to uniform and grooming standards., • Follow established emergency procedures in alignment with company protocols., • Promote teamwork, support sustainability initiatives, and stay informed on operational updates., • Perform preventive maintenance tasks on building systems, machinery, and equipment to sustain optimal performance., • Demonstrate the ability to perform Engineer on Duty responsibilities, including conducting readings and performing building rounds. Your Experience Includes: • Three years of hands-on general maintenance experience, ideally in a hospitality or service-oriented environment., • Technical or vocational training in engineering, building maintenance, or a related field, preferred., • Basic carpentry, electrical and plumbing knowledge required., • Valid Florida Driver License preferred., • Ability to regularly push, pull, lift up to 50 lbs, • Ability to communicate effectively in English verbally with team members, leaders and guests required.

Job Description Objective: Responsibilities include organizing and monitoring storage and distribution of goods with the demonstrated ability to handle and optimize the logistics from start to finish for in-field support for company. Duties and Responsibilities: Responsible for adhering to all Company and Project safety programs, policies, and procedures as well as all Federal, State, and local safety codes and regulations. Successfully complete Company safety induction training to perform the requirements aligned with this responsibility. Will work on such machines but not limited to, forklift, crane, hand tools, saws, drills, etc., and other pieces of equipment as required by supervisor or the job requirement. Visualize and facilitate logistics of field transportation and customer service. Reviewing purchase orders and shipping documents to ensure accuracy. Load, unload, and move material within or near the plant yard or work site. Assists in the operation and maintenance of concrete pumps, plaster pumps and air compressors and various power and hand tools. Maintain logs and records of materials and executed orders. Coordinate logistics according to availabilities and requirements. Resolve shipment and inventory issues. Prepare and maintain supplies for shipping. Supervise the orders and make adjustments to keep the stock levels sufficient. Keep track of quality, quantity, stock levels, delivery times, transport costs, and efficiency. Prepare and present reports for the Rockwork Logistics Lead and higher management. In addition to above: CDL Driver with a Passenger (P) Endorsement with an acceptable driving record Operate a passenger bus, shuttle, or van (designed for 16+ passengers) safely to and from designated pickup/drop-off points. Perform comprehensive pre-trip and post-trip vehicle inspections (checking fluids, brakes, lights, tires, emergency equipment) to ensure safety. Adhere to established, authorized, or scheduled routes while ensuring timely arrivals. Ensure the vehicle is cleaned and maintained and meets company standards and brand representation. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications/Experience/ Skills and Attributes: Required: Minimum of two-years proven, successful experience as a logistics support. Education High school diploma or GED preferred. must be able to perform basic reading, writing and mathematical functions. Must be able to operate machinery in all weather conditions and terrains. Ability to read and comprehend instructions, memorandums, and correspondence. Able to communicate effectively and professional manner with all customers, team members, and management. Able to work with minimal supervision and with minimal technical guidance. Excellent organization and time management skills Ability to take initiative and prioritize tasks. Required: Level II In addition to above: Valid Commercial Drivers License (CDL) Class A or B with Passenger (P) Endorsement. 12+ years of experience as a commercial passenger driver preferred. Preferred: Bilingual in English/Spanish Prior experience in industrial or construction site transportation Ability to read and decipher electrical schematics and machine drawings. Good knowledge of the materials, tools, equipment, and machinery that are used in the industry is preferred. Working Conditions / Schedule: While performing the duties of this job, this is primarily an in-field position and change of work hours will be determined by the Superintendent (based on daylight hours and project needs). General Hours: 6am 2:30pm (MON-FRI) 30-minute lunch (unpaid) 15-minute break (paid) Work environment will change often and will require consistent awareness to surroundings and potential dangers to themselves and others. May be required to work under extreme environmental conditions and work from excessive heights with high reach equipment and/or scaffolding elevations. Physical Requirements: The physical demands described are representative of those that must be met to successfully perform the essential functions of this job. Ability to lift 50 lbs. with assistance from others or lifting devices from floor to waist and waist to floor. Ability to walk, hear, see in order to reasonably perform essential job functions. Must have agility and a good sense of balance, willing to work in high places.

Job Description We're looking for Customer Advocates with at least 2 years of customer-facing experience to build an exciting career at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500! Whether it's helping customers with our one-of-a-kind Vending Machine experience or getting involved in the local community, our Customer Advocates are leading the charge in reintroducing happiness into the car-buying process. Shift Requirement:. The hours for this position are from 1pm - 9 pm. We ask that team members be available to work 6 days a week; Saturdays are required. Unlock Your Earning Potential! We offer a competitive starting hourly rate of $17/hr with significant growth opportunities based on performance. You can boost your earnings within a short timeframe: • Pay Range: $17-$19 hourly, • Starting Pay: $17/hr, • At 3 Months: $17.50/hr And that's not all! Market Operations may offer other performance-based incentive programs specific to your location, potentially unlocking even greater earnings. Benefits + Perks: We continually invest in our team members' success because when our team members grow, we grow. Here is how we invest in you: • Compensation: Competitive, Performance-Based Compensation PLUS 401(k) with Carvana match, opportunity for overtime during busy seasons, • Fast Track Advancement Opportunities: Stellar performers achieve higher pay rates sooner based on performance. Hard work and stellar performance won't go unnoticed., • Health & Wellness: Carvanafit Wellness Program. Free mental health help with Supportlinc., • Time Off & Work-Life Balance: Generous paid time off (7.5 days), • Professional Development: Extensive internal growth and professional development opportunities We're looking for enthusiastic, energetic, and self-motivated team players with at least 2 years of customer-facing experience to: • Create an amazing and memorable pick up experience for our customers; you'll be the face of Carvana when customers come onsite to our car Vending Machine, • Complete customer paperwork and include thorough notes in our customer tracking system, • Swiftly address any customer questions or minor technical issues related to the vending machine process, ensuring a positive and memorable experience., • Consistently drive safe and maintain a clean driving record in accordance with Carvana's CMV Driver Qualification policy., • Candidates must have (or be able to obtain) a Notary in your local jurisdiction within the first 90 days of employment (process sponsored by Carvana). This process may involve satisfying state-specific requirements. For further details, candidates can review their local state notary requirements here: State Notary Requirements., • Candidates must be able to satisfy state-specific requirements related to access DMV/title and registration systems., • California employees must obtain a Vehicle Verifier license within the first 90 days of employment (Process sponsored by Carvana). General qualifications and requirements • Ability to perform physically demanding tasks like detailing vehicles and loading/unloading vehicles onto our Vending Machine. You will work in indoor and outdoor conditions with occasional exposure to inclement/extreme weather, • Ability to walk/stand and sustain physical activity for extended periods of time (8+ hours), • Must be able to read, write, speak and understand English, • Requires high and low levels of movement with the ability to reach with arms, twist, kneel, crouch, climb, balance, and squat, • Requires the grasping, carrying, lifting, pushing, and pulling of items of 50lbs. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. This role is not eligible for visa sponsorship. Must be at least 21 years of age and possess a valid driver's license. Must be able to read, write, speak, and understand English.

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Sr. Staff Electrical Engineer. As a key member of MicroVision's Hardware Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: In this role you will be a technical leader responsible for driving the full product development lifecycle of highly complex circuit boards and subsystems for automotive LiDAR systems. This role owns critical electrical architecture decisions, leads complex technical efforts across multiple programs, and sets best practices for hardware development, validation, and sustainment. The Staff Electrical Engineer is expected to operate with a high degree of autonomy, provide deep technical mentorship, proactively identify and mitigate risk, and serve as a go-to expert for board-level electrical design and system integration. This position works closely with cross-functional and external partners to ensure delivery of robust, scalable, and production-ready hardware solutions. Your responsibilities: • Lead the electrical architecture, design, and development of complex circuit boards and electrical subsystems for automotive LiDAR products from concept through production and sustainment, • Own system-level and board-level design decisions, including partitioning, interfaces, power architecture, and tradeoff analysis across performance, cost, reliability, and manufacturability, • Serve as a technical authority for mixed-signal, power, control, and high-speed interface circuits, • Provide technical leadership across multiple programs or product variants, ensuring consistency, reuse, and continuous improvement of electrical designs, • Lead cross-functional technical discussions with mechanical, firmware, systems, optics, manufacturing, test, quality, and supply chain teams to drive successful product integration, • Drive hardware bring-up, debugging, validation, and characterization at both board and system levels, including complex or ambiguous failure modes, • Define, review, and approve comprehensive test strategies and validation plans to ensure performance, reliability, and compliance requirements are met, • Lead structured root cause investigations for complex design, integration, manufacturing, and field issues; develop and drive corrective and preventive actions, • Champion design for manufacturability (DFM), design for test (DFT), design for reliability (DFR), and cost optimization throughout the product lifecycle, • Conduct and lead thorough schematic, design, and layout reviews, ensuring adherence to electrical best practices including SI/PI, EMI/ESD, grounding, and thermal considerations, • Establish and maintain high-quality technical documentation, including design specifications, architectural descriptions, trade studies, test reports, and release artifacts, • Provide guidance and mentorship to Staff and Senior Engineers, raising the technical bar and promoting hardware development best practices, • Support supplier and contract manufacturer engagement, including technical reviews, yield improvement initiatives, component selection strategy, and obsolescence management, • Actively contribute to technical roadmap planning, risk assessment, and long-term platform strategy Our Required Skills and Qualifications:, • Bachelor’s degree in Electrical Engineering or related field, • 12+ years of experience in electrical hardware development with deep expertise in board-level design and product development, • Demonstrated success leading complex electrical designs through multiple product lifecycles, from early concept through high-volume production and sustainment, • Expert-level experience with schematic capture, circuit analysis, component selection, and PCB development processes, • Advanced hands-on laboratory skills, including complex board bring-up, debugging, root cause analysis, and failure characterization, • Extensive experience designing analog, digital, mixed-signal, and power circuits in high-reliability products, • Deep understanding of hardware development best practices, risk management, design review rigor, and documentation discipline, • Proven ability to independently drive technical direction while influencing and aligning cross-functional teams, • Master’s degree in Electrical Engineering or related field, • Advanced experience with SI/PI analysis and simulation tools (e.g., HyperLynx or equivalent), • Experience architecting and supporting complex sensing, imaging, or electro‑optical systems, • Expert-level proficiency with Altium Designer for schematic capture and PCB layout collaboration, • Experience with environmental, reliability, EMI/EMC, and regulatory compliance testing, • Strong familiarity with automotive product development processes, functional safety considerations, and relevant standards, • Experience supporting global manufacturing operations, production ramps, and long-term field sustainment We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

Job Description About us: With offices in the U.S. and Germany, MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Florida, Washington State, Washington D.C., and Hamburg, Germany, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. Job Summary: MicroVision has an immediate opportunity for a Senior RTL Engineer. As a key member of MicroVision's growing Digital Design Engineering team, you will collaborate with various technical teams in the company to design and take into production, market defining Automotive LiDAR product. The right candidate for this position will be a highly motivated FPGA/RTL Engineer with a breadth of understanding in FPGA design and best practices, including detailed design, System Verilog coding, modelling, simulation, verification, integration and test. Essential Duties and Responsibilities: * Derive FPGA requirements based on system requirements then create FPGA architecture to fulfill those requirements * Design, implement and test Register-Transfer Level (RTL) features and components guided by system architecture and requirements * Own the detailed design of assigned firmware components and subsystem functionality * Document test and implementation plans at unit at system levels and then execute on it. * Work with other teams to integrate developed features into system hardware. * Support bringing up RTL features developed by the team. * Coach/mentor junior members of RTL and integration teams to complete tasks. * Participate in the full software development life cycle (SDLC) flow including peer reviews of requirements, architecture, design, and code implementations within an approved ASPICE development flow. Required Knowledge, Skills and Abilities: * Knowledge of System Verilog, Verilog, Python programming languages * Proficient in FPGA Design methodologies from state machine design to DSP implementation * Experienced in closing timing in FPGA designs. * Mapping algorithms to FPGA appropriate logic implementations * Expert integrating and bringing up features in hardware. * Ability to work well in a fast-moving and complex environment. * Independently driven to complete project tasks * Experience with Configuration Management and Change Control concepts and tools (Git, Subversion, Jira, etc.) * Experience working with Functional Requirements and defining Requirement Based Tests * Experience performing HDL Synthesis/Simulation (eg. VCS, Synplicity, etc.) * Experience with design analyses (Timing, Lint, Clock Domain Crossings, Code Coverage, etc.) and IP compliance strategies * Experience designing portable, scalable Test Benches * Experience with UVM/OVM - Constrained random testing * Familiarity with hierarchical simulation and verification frameworks * Experience with intersystem communication protocols (I2C, UART, SPI, etc.) * Familiarity with microcontroller peripherals including one or more of the following: ADCs, DACs, Flash, EEPROM, timers and watchdogs * Working knowledge of data structures and algorithm fundamentals * Working knowledge of digital and analog electronics Preferred Knowledge, Skills, and Abilities * Knowledgeable of control systems and digital signal processing fundamentals * Proficient in other embedded software systems developed in C / Cpp / etc. * Hands on experience with High-Level Synthesis (HLS) * Excellent scripting and automation skills. Bash shell, python, Make/CMake, and TCL desired * Extensive project experience working on embedded laser applications including Lidar * Safety-critical industry experience. (FIT analysis, etc.) * Working knowledge of various computing architectures beyond FPGAs, such as DSPs, GPUs, or MCUs, and their associated hardware computing platforms used to program them * Experience with ASIC design & migration from FPGA prototypes to production ASICs Required Education and Experience: * BS in Electrical Engineering or related field and 5+ years of experience or equivalent combination of education and experience MicroVision offers flexible work schedule that could include a hybrid schedule of onsite and remote work subject to team and business needs. You must live and reside within commuting distance from MicroVision's office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the US without sponsorship. Benefits: MicroVision is also proud to offer a comprehensive benefit program including: * Competitive compensation and equity program * Choice between an HSA Medical plan or a Buy-Up PPO Medical plan * Dental plan 100% employer-paid for employees * Vision coverage Vision coverage 100% employer-paid for employees * 401k plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay) * Generous time off package including a flexible vacation program as well as incidental personal/sick days and floating holidays * Supplemental pay for Parental Leave * Company-paid basic life and AD&D insurance and long-term disability. MicroVision is committed to an inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

Job Description We are the Thomas Built School Bus dealer for the State of Florida based out of Orlando, where we sell and service school buses in addition to selling parts. This is an excellent company with great benefits! We are currently seeking a School Bus Detailer to ensure our buses go out for delivery looking their best. Responsibilities: This position would assist in making sure new school buses coming from the factory are cleaned in compliance with all company standards before we deliver them to the customer. You would work alongside other detailers out of a bay that is shaded from the sun. Qualifications: • MUST be at least 18 years of age, • English is preferred (communication to collaborate with management/detail team for goals/deadlines), • MUST pass a background check and drug screen Salary: $15.00 per hour Schedule: Mon-Fri (occasional Saturdays and opportunity for overtime) Benefits: • 401(k), • Dental & Vision insurance, • Health insurance, • Employee Assistance Program

Job Description Maintenance Supervisor Why join the Elevation Property Management? We envision a world where anyone, anywhere, can transform their lives by accessing safe, clean, and affordable multifamily and senior housing. Our culture is defined by our mission and guided by our sustainable values. Our people shape the uniqueness of our culture, so we look to invest in top talent in effort to sustain our high performing culture to continue elevating people, properties, and communities. If you are a looking to transform the lives of people and communities, we want you to join our team. Position Summary: Elevation Property Management’s Maintenance Supervisor will serve with discipline and lead with kindness. The Maintenance Supervisor is the senior maintenance leader and is accountable for delivering on our property management commitment to residents. This individual leads all aspects of the property’s hands-on maintenance, including overall inspection, repair work orders and scheduled maintenance of apartments and other interior/exterior areas. The Maintenance Supervisor is a working member of the maintenance team to ensure the community is always in excellent condition. This position will oversee the general maintenance function by managing service requests, delegating tasks, supervising, and directing the work of the department. The Maintenance Supervisor is responsible for taking care of our residential communities and the homes our residents live in, while leading their maintenance team to do the same. The ideal teammate will have the ability to be flexible, proactively communicate, have a natural curiosity to learn, exhibit a high degree of professionalism, and work well both in a team environment and independently. Job Responsibilities: • As directed by the Property Manager, accomplish the property objectives by recruiting, training, and motivating a high-performing staff while maintaining an upbeat, positive attitude., • Perform various maintenance functions which may include but is not limited to electrical installations & repairs, light carpentry/construction, repairing HVAC, plumbing and appliance repairs, drywall and painting repairs, and carpet and vinyl repairs installation, • Work along with maintenance staff to maintain common areas and grounds keeping them free of trash and debris, • Perform on-call emergency service as required, • Complete regular community inspections to proactively identify necessary repairs or replacement of any interior or exterior areas on the property, • Monitor maintenance and up-keep of all mechanical equipment systems by contracted vendors including but not limited to apartment HVAC units, chiller/boiler systems, water heaters, elevators, and generators, • Oversee and assist in preparing all make-ready apartments, which may include but is not limited to ordering materials, painting, cleaning carpet, general repairs, housekeeping and scheduling outside vendors, • Monitoring and management of vendor contracts, • Communicate job expectations, coaches and counsels’ maintenance staff on job performance and disciplinary issues in conjunction with Property Manager, • Ensure maintenance staff is performing to Company standards and work orders are handled in a prompt, courteous and efficient manner, • Maintain open and clear communication with the Property Manager and on-site staff, • Order and control maintenance inventory, • Review property management system (Onesite Facilities) data related to progress on work orders to ensure they are handled in a timely manner per Company policy, • As directed by the Property Manager, identify, and obtain quotes for capital improvements, major system repairs and special maintenance projects, • Adhere to, maintain, and monitor the maintenance budget issued by the Property Manager, • Assist the Property Manager in obtaining initial and renewal quotes for maintenance contracts and other services provided to property, • Minimum of 3 years in supervisory role, • Basic hand tools, • Knowledge and experience repairing electrical, plumbing, carpentry, drywall, and appliances, • Multi-Family/Affordable Housing experience a plus, • NCHM Certified Manager of Maintenance designation preferred, • Self-motivation and attention to detail, • Strong interpersonal skills with the ability to build relationships, • Demonstrated track record of the highest degree of ethics and integrity, • Availability to work evenings and weekends as needed, • Must possess a valid driver license, and have reliable transportation, • Team members need to be able to bend, stoop, climb ladders, reach, carry objects, and crawl in confined areas., • Team members must be able to work inside and outside in all weather conditions, • Team members must be able to push, pull, lift, carry, or maneuver weights of up to twenty-five (25) pounds independently and fifty (50) pounds with assistance. Rare or regular travel may be required for the accomplishment of some or all the daily responsibilities of this position. Elevation Property Management is committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. Elevation Property Management is an equal opportunity employer and, as such, openly support and fully commit to recruitment, selection, placement, promotion, and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state, or local laws. We believe that diversity and inclusion among our teammates are critical to our success. Company Benefits · 11 Paid Holidays · 15 Personal Days · National Healthcare, Dental, and Vision plans · Company Provided Life Insurance plan, Short Term and Long Term Disability · 401(k) plan

Job Description About us: MicroVision is at the forefront of driving the global adoption of innovative perception solutions, with the goal of making mobility and autonomy safer. Our engineering excellence, based in Washington State, Washington D.C., Hamburg, Germany and Orlando, Florida, enables us to develop and supply integrated lidar hardware and perception software solutions. Our proprietary technologies enhance safety and automation across various industrial applications, including robotics, automated warehouses, and agriculture, and are instrumental in the development of autonomous systems. MicroVision’s core technology, initially developed for the automotive industry, continues to accelerate advanced driver-assistance systems (ADAS) and autonomous driving. Building on our history of providing technology to the military segment, our target offerings include semi- and fully autonomous airborne and terrestrial sensor systems. With our solid-state lidar technologies, encompassing FMCW and MEMS-based long-range lidar and flash-based short-range lidar, integrated with our onboard perception software, MicroVision possesses the expertise to deliver safe mobility at the speed of life. To strengthen our team at the Orlando location, we are looking for a Staff Electrical Engineer. As a key member of MicroVision's Hardware Design Engineering team, you will collaborate with various technical teams in the company to design and take into production market defining Automotive LiDAR product. Summary: The Staff Electrical Engineer is responsible for supporting the full product development lifecycle of complex circuit boards for automotive LiDAR systems. This role contributes to the design, integration, validation, launch, and sustainment of electrical hardware, working closely with cross functional teams to deliver robust, high-performance products suitable for volume production. The ideal candidate brings strong technical depth in board level electrical design and hands-on problem solving across development and production phases. Your responsibilities: • Lead and support the design and development of circuit boards for automotive LiDAR products, from concept through production release, • Drive board level architecture, schematic development, component selection, and design tradeoff analysis for mixed signal, power, control, and interface circuits, • Collaborate with mechanical, firmware, systems, optics, manufacturing, test, quality, and supply chain teams to ensure successful product integration, • Support bring up, debug, integration, validation, and characterization of hardware in both laboratory and system level environments, • Develop and execute test plans to verify performance, functionality, reliability, and design robustness, • Investigate and resolve design, integration, manufacturing, and field issues through structured root cause analysis and corrective action, • Support design for manufacturability, design for test, and design for reliability throughout the product lifecycle, • Review PCB layouts to ensure proper implementation of electrical requirements, including power integrity, signal integrity, grounding, thermal considerations, and EMI mitigation, • Generate and maintain technical documentation including design specifications, schematics, test reports, engineering change documentation, and release artifacts, • Support product sustainment activities, including component changes, obsolescence management, supplier issues, yield improvement, and continuous product improvement Our Required Skills and Qualifications:, • Bachelor’s degree in Electrical Engineering or related field, • 8+ years of experience in electrical hardware development, with significant experience in board level design and product development, • Strong experience with schematic capture, circuit analysis, component selection, and PCB development processes, • Experience supporting products through multiple phases of the development lifecycle, including design, integration, validation, production, and sustainment, • Strong hands on lab skills, including board bring up, debugging, failure analysis, and use of standard test equipment such as oscilloscopes, power supplies, DMMs, and logic analyzers, • Experience with analog, digital, mixed signal, and power circuit design, • Strong understanding of hardware development best practices, including design reviews, risk reduction, and documentation discipline, • Ability to work effectively across cross functional teams in a fast paced product development environment, • Master’s degree in Electrical Engineering or related field, • Experience with SI/PI analysis using HyperLynx, • Experience with complex sensing, imaging, or electro optical systems, • Experience with schematic capture and PCB layout using Altium Designer, • Experience with environmental, reliability, or compliance testing, • Familiarity with automotive product development processes, requirements, or standards, • Experience working with contract manufacturers and supporting production ramp and field sustainment MicroVision offers a flexible work schedule that could include a hybrid schedule of onsite and remote work, subject to team and business needs. Individual work schedules will be at the discretion of management and dependent on role and business needs. You must live and reside within commuting distance from MicroVision’s office in Orlando, FL. We are not able to provide visa sponsorship for this position. You must be able to work in the U.S. without sponsorship. Benefits: MicroVision is proud to offer a comprehensive benefit program including: • Competitive compensation and equity program, • Choice between an HSA Medical plan with 100% employer-paid premiums for employees and generous contributions or a Buy-Up PPO Medical plan, • Buy-Up PPO Dental plan 100% employer-paid for employees, • Vision coverage 100% employer-paid for employees, • 401(k) plan with company match to help you save for your future (50% of your contributions up to the first 6% of your eligible pay), • Generous time off package including a flexible vacation program as well as incidental personal/sick days and standard holidays, • Supplemental pay for Parental Leave, • Company-paid basic life and AD&D insurance and long-term disability MicroVision is committed to a diverse and inclusive workplace. MicroVision is an equal opportunity employer and does not discriminate on the basis of race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, status as a disabled veteran or Vietnam-era veteran or any other basis prohibited by local, state or federal law. Please let us know if you need reasonable accommodation in completing the application, attending and/or participating in an interview or in taking any test required for employment. MicroVision is an E-Verify participant. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees’ Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Visit our website at to learn more about our company.

No experience necessary-will train. Newer Freightliner-double beds-refrigerators-no cameras on driver. Gain 3 months of experience and transfer to local.

Company: Seattle Choice Transport LLC.

Not only do you get to help the next generation of drivers, there is also the opportunity to earn up to $25,000/year in incentives. Get in the lane that works for your family and your life! No matter your situation, we have options to accommodate your trucking career goals. Routes subject to experie

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information At Domino's, we are a brand of honesty, transparency and accountability and we want exceptional people like you to join our team! We have continued to prove we “Put our People First” by making sure our work environment is safe and provides stability for you as a team member. The brand continues to deliver the “Power of Possible” to local Domino’s store owners, 90% of which started as delivery drivers and pizza makers in our stores!

Job Description • We are hiring immediately for a full time ROUTE DRIVER - OFFICE COFFEE position., • Location: Canteen LBV - 2589 Consulate Drive, Orlando, FL 32819. Note: online applications accepted only., • Schedule: Full time schedule. Monday - Friday, including some weekends. Hours may vary. Further details upon interview., • Requirement: Prior route driving experience preferred. Must be able to drive a box truck. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Click HERE to see a day in the life of a Canteen Route Driver! Summary: The Route Driver drives a company vehicle over an established route to deliver products or render services and fills and maintains vending and related equipment. The Route Driver is the face of the company and must project a professional and positive image of the company at all times while maintaining and building excellent client and customer relationships. This position has excellent advancement opportunities, providing employees with the foundation needed for entry level management opportunities. Essential Duties and Responsibilities: • Maintain proper inventory levels and product distribution for vending machines., • Provide client and customer satisfaction in every aspect of job performance., • Display a clear understanding of company policies and ability to administer as needed., • Performs routine cleaning and sanitation of vending machines and other related equipment., • Conducts minor service and adjustments on machines. When necessary reports defective equipment to designated maintenance repair service operators or technician dispatcher., • Prior to beginning each days route, ensure that truck is properly loaded with all product required to properly service all scheduled machines following outlined operational procedures., • Informs regular clients and customers of new products or services, listens to and resolves service complaints., • Sets up merchandise and sales promotion displays or issues sales promotion materials to customers., • Accountable for all receipt of goods, invoices, delivery tickets, cash received or collected and product., • Conducts inventory reconciliation in accordance with District procedures., • Keep company vehicle clean and organized at all times; preform pre & post trip vehicle inspections., • Perform all job functions in a safe and professional manner., • Performs other duties as assigned. Qualifications: • 3 years driving experience required., • Valid Non-CDL Class C driver's license (unless otherwise indicated by state), ensuring safe operation of company vehicles in accordance with traffic laws and conditions., • Preferred 1-2 years experience in a customer service position, or a minimum of 1 year of related experience., • Must be able to lift 50 lbs. on a consistent basis., • Ability to operate or willingness to learn material handling equipment (box truck, handcarts, etc.)., • Able to work independently, responsible for route, work unsupervised 98% of the work day. In addition to competitive compensation and excellent benefits, successful employees in this position enjoy: • Comprehensive training, • Advancement opportunities, • Working in a fast paced environment, • Working independently, • Providing excellent customer service to established customers Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1512935 Canteen

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information At Domino's, we are a brand of honesty, transparency and accountability and we want exceptional people like you to join our team! We have continued to prove we “Put our People First” by making sure our work environment is safe and provides stability for you as a team member. The brand continues to deliver the “Power of Possible” to local Domino’s store owners, 90% of which started as delivery drivers and pizza makers in our stores!

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information At Domino's, we are a brand of honesty, transparency and accountability and we want exceptional people like you to join our team! We have continued to prove we “Put our People First” by making sure our work environment is safe and provides stability for you as a team member. The brand continues to deliver the “Power of Possible” to local Domino’s store owners, 90% of which started as delivery drivers and pizza makers in our stores!

Job DescriptionSalary: $6000/month Evans Pro Logistics is seeking motivated and reliable Owner Operators with 16ft box trucks to join our growing team for a dedicated tire delivery route. If you are a professional, customer-focused individual looking for a consistent Monday-Friday schedule and the opportunity to partner with a reputable logistics provider, we encourage you to apply! About Evans Pro Logistics: As a dedicated freight transportation provider built on a foundation of professionalism, efficiency, and unwavering customer commitment, Evans Pro Logistics offers a supportive environment where your hard work is valued. We specialize in expedited shipping and tailored logistical solutions, serving established manufacturers and distributors throughout the US. We pride ourselves on building strong, long-term partnerships through personalized service, specialized expertise, and advanced technology. Route Details: • Type: Dedicated Tire Delivery Route, • Schedule: Monday - Friday, • Mileage: Typically under 250 miles per day, • Safely and efficiently operate your 16ft box truck to deliver tires to designated locations., • Maintain a professional appearance and wear a company-provided uniform., • Provide exceptional customer service during deliveries., • Communicate effectively and promptly with dispatch and customers regarding delivery status., • Be hardworking and reliable, ensuring timely pickups and deliveries., • Maintain your truck in good working order., • Vehicle: Own and operate a well-maintained 16ft box truck., • Insurance: Maintain adequate insurance coverage as required., • Backup Driver: Must have a reliable backup driver available to cover your route when you are unavailable., • Route Coverage: Responsible for ensuring coverage of your route in case of absence or truck issues to maintain route consistency., • Professionalism: Demonstrate a high level of professionalism in appearance and conduct., • Uniform: Willingness to wear a company-provided uniform., • Customer Service: Possess excellent customer service skills and a positive attitude., • Communication: Maintain timely and effective communication., • Weekly Pay: Paid weekly via direct deposit, working a week in the hole., • Overtime: Paid for any hours worked over 9 hours per day., • Mileage Reimbursement: Reimbursed for any mileage driven over 250 miles per day., • Consistent Schedule: Enjoy a predictable Monday-Friday work week., • Local Routes: Typically under 250 miles per day, allowing for a better work-life balance., • Reliable Pay: Weekly direct deposit for consistent income., • Supportive Environment: Be part of a team that values professionalism and efficiency. If you meet the requirements and are interested in this excellent opportunity, please submit your information and details about your truck and experience to us via, or call. Join Evans Pro Logistics and be a vital part of our dedicated team!

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information At Domino's, we are a brand of honesty, transparency and accountability and we want exceptional people like you to join our team! We have continued to prove we “Put our People First” by making sure our work environment is safe and provides stability for you as a team member. The brand continues to deliver the “Power of Possible” to local Domino’s store owners, 90% of which started as delivery drivers and pizza makers in our stores!